User Guide Product: Wireless Charging External Battery Pack Model: JCBATTERY Input: 15Vdc, 2A USB-A Output: 5Vdc, 2.4A Type-C Output: 5Vdc 3A, 9Vdc 3A, 15Vdc 2A, 20Vdc 1.5A (Max) Rated Capacity: 3500mAh/70Wh (20Vdc 1.5A) Wireless Output: 10W Max AC output: 110V/60Hz, 100W Thank you for choosing the Wireless Charging External Battery Pack. Using the Product Connect the battery pack to your device and charging will start automatically. If nothing happens after connecting your device, press the power button to restart the battery pack. iSmart Technology will automatically identify all connected devices and provide the optimal charging current for each one. Press the power button once to check the remaining battery level. Maximum protection: Over charge / over discharge / overvoltage / over power protection, temperature protection, short circuit protection, recovery protection, anti-reverse protection, EMF protection. Caution It is normal for the battery pack to become slightly warm during charging/discharging. Keep away from heat, moisture, and liquids. Do not dismantle the battery pack. Fully charge the battery pack at least once every six months FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not instructions, may cause harmful installed and used interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. in accordance with the