all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 4 |
|
Users Manual | Users Manual | 5.44 MiB | ||||
1 2 3 4 | Cover Letter(s) | March 08 2016 / April 08 2016 | ||||||
1 2 3 4 | Cover Letter(s) | April 08 2016 | ||||||
1 2 3 4 | Cover Letter(s) | March 08 2016 / April 08 2016 | ||||||
1 2 3 4 | External Photos | March 08 2016 | ||||||
1 2 3 4 | Cover Letter(s) | March 08 2016 / April 08 2016 | ||||||
1 2 3 4 | RF Exposure Info | March 08 2016 / April 08 2016 | ||||||
1 2 3 4 | Test Report | March 08 2016 / April 08 2016 | ||||||
1 2 3 4 | Test Setup Photos | March 08 2016 | ||||||
1 2 3 4 | Test Report | March 08 2016 / April 08 2016 | ||||||
1 2 3 4 | Test Setup Photos | March 08 2016 | ||||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | RF Exposure Info | |||||||
1 2 3 4 | Internal Photos | |||||||
1 2 3 4 | ID Label/Location Info | |||||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Report |
1 2 3 4 | Users Manual | Users Manual | 5.44 MiB |
Archer C5400 User Guide AC5400 Wireless Tri-band MU-MIMO Gigabit Router REV1.0.0 1910011516 Contents About This Guide ...............................................................................................1 Chapter 1. Get to Know About You Router . 2 1. 1. Product Overview . 3 1. 2. Main Features . 4 1. 3. Panel Layout . 5 1. 3. 1. Top View. 5 1. 3. 2. The Back Panel . 7 Chapter 2. Connect the Hardware. 8 Position Your Router. 9 2. 1. 2. 2. Connect Your Router . 9 Chapter 3. Log into Your Router. 11 Chapter 4. Set Up Internet Connections . 13 4. 1. Quick Setup. 14 4. 2. Manually Configure Your Internet Connection Settings . 17 4. 3. Setting Up an IPv6 Internet Connection . 21 Chapter 5. Guest Network . 25 5. 1. Create Guest Network . 26 5. 2. Customize Guest Network Options. 27 Chapter 6. USB Application . 28 Local Storage Sharing . 29 6. 1. 6. 1. 1. Access the USB Disk . 29 6. 1. 2. Customize Your Settings. 31 Remote Access via FTP Server. 34 6. 2. 1. Access the USB Disk . 34 6. 2. 2. Customize Your Settings. 37 6. 3. Media Sharing. 38 6. 3. 1. Access the USB Disk . 38 6. 2. 6. 3. 2. Customize Your Settings. 39 Printer Sharing . 41 3G/4G Networking Sharing . 44 6. 4. 6. 5. Chapter 7. Parental Controls. 47 Chapter 8. QoS (Quality of Service). 51 8. 1. Prioritize Internet Traffic with QoS. 52 8. 2. Update the Database . 54 Chapter 9. Network Security. 56 9. 1. Protect the Network from Cyber Attacks . 57 9. 2. Access Control . 58 9. 3. IP & MAC Binding. 60 Chapter 10. NAT Forwarding . 61 10. 1. Share Local Resources in the Internet by Virtual Server. 62 10. 2. Open Ports Dynamically by Port Triggering. 63 10. 3. Make Applications Free from Port Restriction by DMZ . 64 10. 4. Make Xbox Online Games Run Smoothly by UPnP . 65 Chapter 11. VPN Server. 67 11. 1. Use OpenVPN to Access Your Home Network. 68 11. 2. Use PPTP VPN to Access Your Home Network . 69 Chapter 12. Customize Your Network Settings . 74 12. 1. Change the LAN Settings . 75 12. 2. Configure to Support IPTV Service . 75 12. 3. Specify DHCP Server Settings . 77 12. 4. Set Up a Dynamic DNS Service Account . 78 12. 5. Create Static Routes . 79 12. 6. Specify Wireless Settings . 81 12. 7. Use WPS for Wireless Connection . 83 12. 7. 1. Set the Routers PIN . 84 12. 7. 2. Use the WPS Wizard for Wi-Fi Connections . 84 12. 8. Schedule Your Wireless Function . 84 Chapter 13. Manage the Router . 86 13. 1. Set Up System Time . 87 13. 2. Test the Network Connectivity . 88 13. 3. Upgrade the Firmware. 90 13. 4. Backup and Restore Configuration Settings . 90 13. 5. Change the Administrator Account . 91 13. 6. Password Recovery . 92 13. 7. Local Management. 93 13. 8. Remote Management . 94 13. 9. System Log . 95 13. 10. Monitor the Internet Traffic Statistics . 97 13. 11. Control LEDs . 98 FAQ .................................................................................................................. 100 Specifications ................................................................................................ 113 About This Guide This guide provides details of each function and shows how to configure the router appropriate to your needs. In addition to this guide, a Quick Installation Guide is also released with each TP-LINK router, you are suggested to configure your router for quick Internet setup by following the published Quick Installation Guide before you get started with a further configuration. Conventions In this guide the following conventions are used:
Convention Description router Stands for AC5400 Wireless Tri-Band MU-MIMO Gigabit Router without any explanation. parameters screenshots Parameters provided in the screenshots are just references for setting up the device, which may differ from the actual situation. You can set the parameters according to your demand. The demonstrated screenshots may look a little different from the actual web page of your device due to the various firmware versions. Please just configure your product based on the actual web page. Blue Italic Hyperlinks are in blue italic. You can click to redirect to a website or a specific section. Blue
>
Note:
Tips:
Contents to be emphasized and texts on the web page are in blue, including the menus, items, buttons, etc. The menu structures to show the path to load the corresponding page. For example, Advanced > Wireless > MAC Filtering means the MAC Filtering function page is under the Wireless menu that is located in the Advanced tab. Ignoring this type of note might result in a malfunction or damage to the device. Indicates important information that helps you make better use of your device. symbols on the web page click to edit the corresponding entry. click to delete the corresponding entry. click to enable or disable the corresponding entry. 1 Chapter 1 Get to Know About You Router This chapter introduces what the router can do and shows its main features and appearance. This chapter contains the following sections:
Product Overview Main Features Panel Layout Chapter 1 Get to Know About You Router 1. 1. Product Overview What This Product Does TP-LINKs Archer C5400 integrates 4-port Switch, Firewall, NAT-router and Wireless AP. Powered by Multi-User MIMO technology, the Archer C5400 delivers exceptional range and speed, which can fully meet the need of Small Office/Home Office (SOHO) networks and the users demanding higher networking performance. Your wireless connections are radio band selectable to avoid interference in your area, and the four built-in Gigabit ports supply high-speed connection to your wired devices. 802.11ac - The Next Generation of Wi-Fi TP-LINKs Archer C5400 comes with the next generation Wi-Fi standard 802.11ac, backward compatible with 802.11n and 3 times faster than wireless N speeds. With higher power efficiency and robust security, 802.11ac is the perfect way to accelerate a home multimedia network and solve congestion that multiple devices may cause. 3166Mbps Concurrent Trinal Band - More Bandwidth, Less Interference With 2166Mbps wireless speeds over the crystal clear 5GHz band and 1000Mbps over the 2.4GHz band, Archer C5400 offers you the flexibility of three dedicated networks and ensures amazing wireless performance. Simple tasks such as sending e-mails or web browsing can be handled by the 2.4GHz band while bandwidth intensive tasks like online gaming or HD video streaming can be processed by the 5GHz band all at the same time. Multifunctional USB Port Easy Storage and Sharing Using the Archer C5400s multi-functional USB 3.0 port, you can share a printer with multiple computers and devices on your network and can also share files & media at home or via the FTP server while away from home. Guest Network Guest Network Access provides secure Wi-Fi access for guests sharing your home or office network in a controlled manner without exposing private Wi-Fi access codes or other personal data. IPv6 Supported Archer C5400 supports IPv6, which is the foundation of the next generation of the Internet and enables a range of new services and improved user experience. Parental Control Parental Controls allow parents or administrators to deploy restricted access for children or staff. With URL blocking, you can easily set up a black or white list to limit the level of web access. 3 Chapter 1 Get to Know About You Router Tether APP TP-LINK Tether provides the easiest way to access and manage your router with your wireless devices. 1. 2. Main Features Supports 802.11ac Muti-User MIMO Supports 802.11ac - The next generation of Wi-Fi, compatible with 802.11n Simultaneous 2.4GHz 1000Mbps and 5GHz 2166Mbps connections for 3166Mbps of total available bandwidth 8 dual band fixed external antennas and high power amplifiers provide stable signals and optimal wireless coverage Provides WPA/WPA2, WPA-PSK/WPA2-PSK authentication, TKIP/AES encryption security Supporting Dynamic IP/Static IP/PPPoE/PPTP/L2TP Internet access Supports USB Storage Sharing, Print Server, FTP Server, Media Server. Shares a printer locally and files & media with networked devices or remotely via FTP server Built-in NAT and DHCP server supporting static IP address distributing Guest Network access provides secure Wi-Fi access for guests sharing your home or office network Parental Controls allow parents or administrators to establish restricted access policies for children or staff Quality of Service (QoS) makes it easier for you to manage the bandwidth of devices connected to the router Supports IP/MAC filter and URL filter, Access Control list SPI and NAT firewall protects end-user devices from potential attacks from the Internet Easy one-touch WPA wireless security encryption with the WPS button Wi-Fi On/Off Button allows users to turn their wireless radio on or off Supports firmware upgrade and Web management Supports Virtual Server, DMZ host and Port Triggering Supports Dynamic DNS, UPnP and Static Routing Provides Automatic-connection and Scheduled Connection on certain time to the Internet Supports system log and Traffic Statistics Supports IPv6 4 Chapter 1 Get to Know About You Router 1. 3. Panel Layout 1. 3. 1. Top View The routers LEDs (view from top to bottom) are located on the front. You can check the routers working status by following the LED Explanation table. LED Explanation Name Status Indication On System initialization completes.
(Power) Flashing System initialization or firmware upgrade is in process. Do not disconnect or power off the router.
(2.4GHz Wireless)
( 5GHz-1 Wireless)
( 5GHz-2 Wireless)
(Ethernet) Off On Off On Off On Off On Off Power is off. The 2.4GHz wireless band is working properly. The 2.4 GHz wireless band is disabled. The 5GHz-1 wireless band is working properly. The 5GHz-1 wireless band is disabled. The 5GHz-2 wireless band is working properly. The 5GHz-1 wireless band is disabled. At least one Ethernet port is connected. No Ethernet port is connected. 5 Chapter 1 Get to Know About You Router LED Explanation Name Status Orange On Indication The physical connection is ok, but the Interent is still not avaiable.
(Internet) Blue On Internet is available. Off No Internet connection.
(WPS)
(USB) On/Off Flashing Turns On when a WPS synchronization automatically turns Off about five minutes later. is established and A wireless device is trying to connect to the network via WPS. This process may take up to 2 minutes. On The USB device is identified and ready to use. Flashing The USB device is being identified. Off No USB device is plugged into the USB port or the USB device is not identified or USB device has been safely ejected. The following buttons (view from left to right) are also located on the front panel. Button Description Buttons Description
(Wi-Fi Button) Press this Wi-Fi button for about 1 second to turn on or off the wireless function of your router.
(WPS Button) Press this WPS button, and immediately press the WPS button on your client device. of the router should change from flashing to solid on, indicating The WPS LED successful WPS connection.
(LED Button) Press the LED button for about 2 seconds to turn on or off the LEDs of your router. 1. 3. 2. The Back Panel 6 Chapter 1 Get to Know About You Router The following parts (view from left to right) are located on the rear panel. Item Description Reset Button Press this button for about 7 seconds to reset the router. USB 2.0 Port Connect your USB 2.0 storage device or USB 2.0 printer to this port. Internet Port This port is where youll connect to the DSL/Cable modem, or Ethernet. Ethernet Ports (1/2/3/4) Connect your Etherent devices, like PCs, to these ports. USB 3.0 Port Connect your USB 3.0 storage device or USB 3.0 printer to this port. Power On/Off Button Press this button to power on or off the router. Power Port This port is where you will connect the power socket via the provided power adapter. 7 Chapter 2 Connect the Hardware This chapter contains the following sections:
Position Your Router Connect Your Router Chapter 2 Connect the Hardware Position Your Router 2. 1. The Product should not be located where it will be exposed to moisture or excessive heat. Place the router in a location where it can be connected to the various devices as well as to a power source. Make sure the cables and power cord are safely placed out of the way so they do not create a tripping hazard. The router can be placed on a shelf or desktop. Keep away from the strong electromagnetic radiation and the device of electromagnetic sensitive. Connect Your Router 2. 2. 1. Follow the steps below to connect your router. If your Internet connection is through an Ethernet cable from the wall instead of through a DSL / Cable / Satellite modem, connect the Ethernet cable directly to the routers Internet port, then follow steps 5 and 6 to complete the hardware connection. 1 Place the router horizontally and extend the antennas to the maximum angle. Note: For best performance, horizontal installation is recommended. Antenna direction and position can affect performance in vertical installation situations. 5 Turn on the router. Internet Power adapter Modem Router 2 2 Turn off the modem, Turn off the modem, and remove the backup and remove the backup battery if it has one. battery if it has one. 3 3 Connect the modem to the Connect the modem to the Internet port on your router with Internet port on your router with an Ethernet cable. an Ethernet cable. 4 Turn on the modem, and then wait about 2 minutes for it to restart. 6 Verify that the following LEDs are on and stable before continuing with the configuration. Power 2.4GHz 5GHz-1 5GHz-2 Internet On On On On On Tips:
1. If all the LEDs are off, press the LED On/Off button for about 1 second, then check the LEDs again. 2. If the 2.4GHz, 5GHz-1, and 5GHz-2 LEDs are off, press the Wi-Fi On/Off button for about 2 seconds, then check the LEDs again in a few seconds. 2. Connect your computer to the router. Method 1: Wired Turn off the Wi-Fi on your computer and connect the devices as shown below. 9 Chapter 2 Connect the Hardware Ethernet cable Method 2: Wirelessly Connect wirelessly by using the SSID (Network Name) and Wireless Password/PIN printed on the product label at the bottom of the router. Method 3: Use the WPS button Wireless devices that support WPS, including Android phones, tablets, most USB network cards, can be connected to your router through this method. (WPS is not supported by IOS devices.) Note:
The WPS function cannot be configured if the wireless function of the router is disabled. Also, the WPS function will be disabled if your wireless encryption is WEP. Please make sure the wireless function is enabled and is configured with the appropriate encryption before configuring the WPS. 1. Tab the WPS icon on the devices screen. 2. Immediately press the WPS button on your router. Close 10 Chapter 3 Log into Your Router Chapter 3 Log into Your Router With a Web-based utility, it is easy to configure and manage the rouer. The Web-based utility can be used on any Windows, Macintosh or UNIX OS with a Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari. Follow the steps below to log into your router. 1. Set up the TCP/IP Protocol in Obtain an IP address automatically mode on your computer. 2. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. The default one is admin for both username and password. Note:
If the login window does not appear, please refer to FAQ. 12 Chapter 4 Set Up Internet Connections This chapter introduces how to connect your router to the Internet. The router is equipped with a web-based Quick Setup wizard. It has many ISP information built in, automates many of the steps and verifies that those steps have been successfully completed. Furthermore, you can also set up an IPv6 connection if your ISP provided IPv6 service. This chapter contains the following sections:
Quick Setup Manually Configure Your Internet Connection Settings Setting Up an IPv6 Internet Connection Chapter 4 Set Up Internet Connections 4. 1. Quick Setup The Quick Setup Wizard will guide you through the process to set up your router to access the Internet. Tips:
If you need the IPv6 Internet connection, please refer to the section of 4. 3. Setting Up an IPv6 Internet Connection. Follow the steps below to set up your router to access the Internet. 1. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 2. Click Quick Setup on the top of the page. 3. Select your Region and Time Zone from the drop-down list and click Next. Note:
Per FCC regulations, all Wi-Fi products marketed in the U.S. are fixed to the U.S. region. 4. Click Auto Detect and the router will detect your connection type automatically. Note:
You can also choose the connection type manually. Contact your ISP if you are not sure about the Internet connection information. If you use DSL line and you are only provided an account name and a password by your ISP, choose PPPoE. If you use cable TV or fiber cable, choose Dynamic IP. If you are provided more information such as IP address, Subnet Mask and Default Gateway, choose Static IP. 14 Chapter 4 Set Up Internet Connections 5. In this case, the router automatically detects Dynamic IP as the connection type. Click Next. 6. Follow the instructions on the page to decide whether to clone MAC Address. Click Next. 7. Configure your wireless settings and click Next. 15 Chapter 4 Set Up Internet Connections Note:
1. You may customize your 2.4GHz/5GHz-1/5GHz-2 SSID and password. Once done, the wireless connection will disconnect automatically, and you must then use the new SSID/password to regain access to the Internet. 2. Tick Hide SSID if you want to hide this wireless network name. 8. Confirm the information and click Save. 9. Click Test Internet Connection. If you successfully connect to the Internet, the screen will display as follows. 16 Chapter 4 Set Up Internet Connections 10. Now your computer and Wi-Fi devices can connect to the Internet!
Tips:
You can connect your computer to the routers Etherent port using an Ethernet cable to join the local area network. You can also find and select the wireless network name on your Wi-Fi device to join the Wi-Fi network. 4. 2. Manually Configure Your Internet Connection Settings In this part, you can check your current Internet connection settings. You can also modify the settings according to the service information provided by your ISP. Follow the steps below to check or modify your Internet connection settings. 1. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 2. Go to Basic > Internet. 3. Select your Internet connection type from the drop-down list. Note:
If you are unsure what your connection type is, click Auto Detect. Since different connection types need different cables and connection information, you can also refer to the demonstrations in Step 4 to judge your connection type. 4. Follow the instructions on the page to continue the configuration. Parameters on the figures are just used for demonstration. 1 ) If you choose Dynamic IP, you need to select whether to clone the MAC address or not. Dynamic IP users are usually equipped with cable TV or fiber cable. 17 Chapter 4 Set Up Internet Connections 2 ) If you choose Static IP, enter the information provided by your ISP in the corresponding fields. 3 ) If you choose PPPoE, enter the username and password provided by your ISP. PPPoE users usually have DSL cable. 18 Chapter 4 Set Up Internet Connections 4 ) If you choose L2TP, enter the username and password and choose the Secondary Connection provided by your ISP. Different parameters are needed according to the Secondary Connection. 5 ) If you choose PPTP, enter the username, password and choose the Secondary Connection provided by your ISP. Different parameters are needed according to the Secondary Connection. 19 Chapter 4 Set Up Internet Connections 5. Click Save to make the settings take effect. To check your Internet connection, click Network Map on the left of the page. Note:
It may take 1-2 minutes to make the settings valid. 6. After the connection succeed, the screen will display as follows. Here we take PPPoE as an example. Tips:
1. If your Internet connection type is BigPond Cable, please go to Advanced > Network > Internet. 2. If you use Dynamic IP and PPPoE and you are provided any other parameters that are not required on the page, please go to Advanced > Network > Internet to complete the configuration. 3. If you still cannot connect to the Internet, refer to FAQ for further instructions. 20 Chapter 4 Set Up Internet Connections Setting Up an IPv6 Internet Connection 4. 3. Your ISP provides information about one of the following Internet connection types:
PPPoE, Dynamic IP(SLAAC/DHCPv6), Static IP, 6to4 tunnel, Pass-Through (Bridge). 1. Visit http://tplinkwifi.net, then log in with the username and password you set for the router. 2. Go to Advanced > IPv6. 3. Select the Internet connection type provided by ISP. Tips:
If you do not know what your Internet connection type is, contact your ISP or judge according to already known information provided by your ISP. 4. Fill in information as required by different connection type. (Red blanks must be filled.) 1 ) Static IP: Fill in blanks and click Save. 21 Chapter 4 Set Up Internet Connections 2 ) Dynamic IP(SLAAC/DHCPv6): Click Advanced to have more configuration if ISP requires. Click Save to save the settings and then click Renew to finish the configuration. 3 ) PPPoE: Fill in the Username and Password. Click Advanced to have more configuration if ISP requires. Click Save to save the settings and then click Connect to finish the configuration. 22 Chapter 4 Set Up Internet Connections 4 ) 6to4 Tunnel: An IPv4 Internet connection type is a prerequisite for this connection type. (4. 2) Click Advanced to have more configuration if ISP requires. Click Save to save the settings and then click Connect to finish the configuration. 5 ) Pass-Through (Bridge): Click Save and skip to step 6. 23 Chapter 4 Set Up Internet Connections 5. Configure LAN ports. Windows users are recommended to choose from the first two types. Fill in Address Prefix provided by ISP, and click Save to save the settings. Tips:
Find Help on the management interface to know more about items. 6. Click Status to check whether you succeed or not. The following figure is an example of a successful PPPoE configuration. Tips:
Visit FAQ if there is no Internet connection. 24 Chapter 5 Guest Network This function allows you to provide Wi-Fi access for guests without disclosing your main network. When you have guests in your house, apartment, or workplace, you can create a guest network for them. In addition, you can limit the network authorities for guests to ensure network security and privacy. This chapter contains the following sections:
Create Guest Network Customize Guest Network Options Chapter 5 Guest Network Create Guest Network 5. 1. 1. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 2. Go to Advanced > Guest Network. 3. Create a 2.4GHz, 5GHz-1 and/or 5GHz-2 guest network according to your needs. 1 ) Enable Guest Network of 2.4GHz Wireless, 5GHz-1 Wireless and/or 5GHz-2 Wireless. 2 ) Set an easy-to-identify SSID. Dont select Hide SSID unless you want your guests and other people to manually input this SSID for Wi-Fi access. 3 ) Set Security to WPA/WPA2 Personal, keep the default Version and Encryption values, and set an easy-to-remember Password. 4. Click Save. Now your guests can access your guest network using the SSID and password youve set!
Tips:
To view guest network information, go to Advanced > Status and find the Guest Network section. 26 Chapter 5 Guest Network Customize Guest Network Options 5. 2. 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to Advanced > Guest Network. 3. Customize guest network options according to your needs. Allow guests to see each other Tick this checkbox to allow the clients in your guest network to access each other. Allow guests to access my local network Tick this checkbox to allow the clients in your guest network to access your local network, not just Internet access. 4. Click Save. Now users in your guest network can enjoy only the network authorities youve assigned!
Tips:
To view guest network information, go to Advanced > Status and find the Guest Network section. 27 Chapter 6 USB Application This chapter describes how to share and access USB devices connected to the router among different clients. The router only supports USB external flash drives, hard drives, USB printers and USB 3G/4G modems. This chapter contains the following sections:
Local Storage Sharing Remote Access via FTP Server Media Sharing Printer Sharing 3G/4G Networking Sharing Chapter 6 USB Application Local Storage Sharing 6. 1. Share your USB storage devices with different users on the network. 6. 1. 1. Access the USB Disk 1. Connect Your USB Disk Insert your USB storage device into the routers USB port directly or using a USB cable. Wait several seconds until the USB LED becomes solid on. Tips:
If you use USB hubs, make sure no more than 4 devices are connected to the router. If the USB storage device requires using bundled external power, make sure the external power has been connected. If you use a USB hard drive, make sure its file system is FAT32 or NTFS. Before you physically disconnect a USB device from the router, safely remove it to avoid data damage: Go to Advanced > USB Settings > Device Settings and click
. 2. Access Your USB Disk By default, all the network clients can access all folders on your USB disk. Refer to the following table for access instructions. You can also customize your sharing content and set a sharing account by referring to Customize Your Settings. Method 1:
Go to Computer > Network, then click the Network Server Name
(C5400_share by default) in the Computer section. Note:
Operations in different systems are similar. Here we take Windows 7 as an example. Windows computer s 29 Chapter 6 USB Application Method 2:
Open the Windows Explorer (or go to Computer) and type the server address \\tplinkwifi.net or ftp://tplinkwifi.net in the address bar, then press [Enter]. Windows computer Mac 1 ) Select Go > Connect to Server 2 ) Type the server address smb://tplinkwifi.net 3 ) Click Connect. 4 ) When prompted, select the Guest radio box. (If you have set up a username and a password to deny anonymous access to the USB disks, you should select the Registered User radio box. To learn how to set up an account for the access, refer to To Set up Authentication for Data Security.) Pad Use a third-party app for network files management. Tips:
You can also access your USB disk by using your Network/Media Server Name as the server address. Refer to To Customize the Address of the USB Disk to learn more. 30 Chapter 6 USB Application 6. 1. 2. Customize Your Settings To Only Share Specific Content By default, Share All is enabled so all content on the USB disk is shared. If you want to only share specific folders, follow the steps below:
1. Visit http://tplinkwifi.net, then log in with the username and password youve set for the router. 2. Go to Basic > USB Settings > Sharing Access. Focus on the Folder Sharing section. 3. Click the button to disable Share All, then click Add to add a new sharing folder. 4. Select the Volume Name and Folder Path, then enter a Folder Name as you like. 5. Decide the way you share the folder:
Allow Guest Network Access: If you tick this check box, guest network users can access this folder. Enable Authentication: If you tick this check box, you will be required to use a username and password to access the folder. Refer to To Set up Authentication for Data Security to learn more. Enable Write Access: If you tick this check box, network clients can modify the folder. 31 Chapter 6 USB Application Enable Media Sharing: If you tick this check box, you can view photos, play music and watch movies in the folder directly from DLNA-supported devices. Refer to Media Sharing to learn more. 6. Click OK. Tips:
The router can share 32 volumes at most. You can click not need to share. on the page to detach the corresponding volume you do To Set up Authentication for Data Security If you enable Authentication, network clients will be required to enter the username and password you set when accessing the USB disk. 1. Visit http://tplinkwifi.net, then log in with the username and password youve set for the router. 2. Go to Advanced > USB Settings > Sharing Access. Focus on the Sharing Account section. 3. Choose Use Default Account (admin) or Use New Account and click Save. 4. Enable Authentication to apply the account you just set. If you leave Share All enabled, click the button to enable Authentication for all folders. 32 Chapter 6 USB Application If Share All is disabled, enable Authentication for specific folders. Note:
Due to Windows credential mechanism, you might be unable to access the USB disk after changing Authentication settings. Please log out from Windows and try to access again. For more details, please refer to FAQ. To Customize the Address of the USB Disk You can customize the server name and use the name to access your USB disk. 1. Visit http://tplinkwifi.net, then log in with the username and password youve set for the router. 2. Go to Advanced > USB Settings > Sharing Access. Focus on the Sharing Settings section 3. Make sure Network Neighborhood is ticked, and enter a Network/Media Server Name as you like, such as My-Share, then click Save. 33 Chapter 6 USB Application 3. Now you can access the USB disk by visiting \\MyShare (for Windows) or smb://
MyShare (for Mac). Remote Access via FTP Server 6. 2. You can access your USB disk outside the local area network. For example:
Share photos and other large files with your friends without logging in to (and paying for) a photo-sharing site or email system. Get a safe backup for the materials for a presentation. Remove the files on your cameras memory card from time to time during the journey. Note:
If your ISP assigns a private WAN IP address (such as 192.168.x.x or 10.x.x.x), you cannot use this feature because private addresses are not routed on the Internet. 6. 2. 1. Access the USB Disk 1. Connect Your USB Disk Insert your USB storage device into the routers USB port directly or using a USB cable. Wait several seconds until the USB LED becomes solid on. Tips:
If you use USB hubs, make sure no more than 4 devices are connected to the router. If the USB storage device requires using bundled external power, make sure the external power has been connected. If you use a USB hard drive, make sure its file system is FAT32 or NTFS. Before you physically disconnect a USB device from the router, safely remove it to avoid data damage:
Select Advanced > USB Settings > Device Settings and click
. 2. Enable Authentication for Data Security 34 Chapter 6 USB Application It is strongly recommended that you set and apply a sharing account for data security. 1 ) Visit http://tplinkwifi.net, then log in with the username and password youve set for the router. 2 ) Go to Advanced > USB Settings > Sharing Access. Focus on the Sharing Account section. 3 ) Choose to Use default Account (admin) or Use New Account and click Save. 4 ) Enable Authentication to apply the sharing account. If you leave Share All enabled, click the button to enable Authentication for all folders. If Share All is disabled, enable Authentication for specific folders. 35 Chapter 6 USB Application 3. Enable the FTP (via Internet) Select the check box to enable FTP (via Internet), then click Save. 4. Access Your USB Disk via Internet Now different clients with Internet connection can access the USB disk:
36 Chapter 6 USB Application 1 ) Open the Windows Explorer (or go to Computer, only for Windows users) or open a web browser. 2 ) Type the server address in the address bar:
Type in ftp://<WAN IP address of the router>:<port number>
(such as ftp://59.40.2.243:21). If you have specified the domain name of the router, you can also type in ftp://<domain name>:<port number> (such as ftp://MyDomainName:21) Computer The Address Bar of the Windows Explorer (Windows 7) 3 ) Press [Enter] on the keyboard. 4 ) Access with the username and password youve set in Step 2 Enable Authentication for Data Security. Tips:
You can also access the USB disk via a third-party app for network files management, which can resume broken file transfers. Pad Use a third-party app for network files management. Tips:
Refer to Set Up a Dynamic DNS Service Account to learn how to set up a domain name for you router. 6. 2. 2. Customize Your Settings To Only Share Specific Content By default, Share All is enabled so all content on the USB disk is shared. If you want to only share specific folders, follow the steps below:
1. Visit http://tplinkwifi.net, then log in with the username and password youve set for the router. 2. Go to Basic > USB Settings > Sharing Access. Focus on the section of Folder Sharing. Click the button to disable Share All, then click Add to add a new sharing folder. 3. Select the Volume Name and Folder Path, then specify the Folder Name as you like. 4. Tick Enable Authentication. If you allow network clients to modify this folder, Tick Enable Write Access. 37 Chapter 6 USB Application 5. Click OK. Tips:
The router can share 32 volumes at most. You can click not need to share. on the page to detach the corresponding volume you do 6. 3. Media Sharing The feature of Media Sharing allows you to view photos, play music and watch movies stored on the USB disk directly from DLNA-supported devices, such as your computer, pad and PS2/3/4. 6. 3. 1. Access the USB Disk 1. Connect Your USB Disk 38 Chapter 6 USB Application Insert your USB storage device into the routers USB port directly or using a USB cable. Wait several seconds until the USB LED becomes solid on. Tips:
If you use USB hubs, make sure no more than 4 devices are connected to the router. If the USB storage device requires using bundled external power, make sure the external power has been connected. If you use a USB hard drive, make sure its file system is FAT32 or NTFS. Before you physically disconnect a USB device from the router, safely remove it to avoid data damage: Go to Advanced > USB Settings > Device Settings and click
. 2. Play the Media on Your USB Disk Now the DLNA-supported devices (such as your computer and pad) connected to the router can detect and play the media files on the USB disks. Go to Computer > Network, then click the Media Server Name
(C5400_share by default) in the Media Devices section. Note:
Here we take Windows 7 as an example. Windows computer Pad Use a third-party DLNA-supported player. 6. 3. 2. Customize Your Settings To Only Share Specific Content By default, Share All is enabled so all content on the USB disk is shared. If you want to only share specific folders, follow the steps below:
39 Chapter 6 USB Application 1. Visit http://tplinkwifi.net, then log in with the username and password youve set for the router. 2. Go to Basic > USB Settings > Sharing Access. Focus on the Folder Sharing section. 3. Click the button to disable Share All, then click Add to add a new sharing folder. 4. Select the Volume Name and Folder Path, then enter a Folder Name as you like. 5. Tick Enable Media Sharing and click OK. Tips:
The router can share 32 volumes at most. You can click not need to share. on the page to detach the corresponding volume you do 40 Chapter 6 USB Application Printer Sharing 6. 4. The Printer Sharing feature helps you share a printer with different computers connected to the router. Note:
Printers unlisted on this page may be incompatible with the router:
http://www.tp-link.com/common/compatible/print-server/. 1. Install the Driver of the Printer Make sure you have installed the driver of the printer on each computer that needs printer service. If you do not have the driver, contact the printer manufacturer. 2. Connect the Printer 3. Cable a printer to the USB port with the USB cable. Wait several seconds until the USB LED becomes solid on. Install the TP-LINK USB Printer Controller Utility TP-LINK USB Printer Controller Utility helps you access the shared printer. Download and install the utility on each computer that needs printer service. 1 ) Visit http://www.tp-link.com/app/usb/. 2 ) Click PC Utility (for Windows users) or Mac Utility to download the installation file and uncompress it. 3 ) Open the uncompressed folder, then click TP-LINK USB Printer Controller Setup
(for Windows users) or TP-Link UDS Printer Controller Installer (for Mac users) to install the utility. 4. Access the Printer You should set the shared printer as Auto-Connect Printer on every computer that needs printer service. 1 ) Double-click the icon 2 ) Highlight the printer you share. on your desktop to launch the USB Printer Controller. 41 Chapter 6 USB Application Windows Mac 3 ) Click the Auto-Connect for printing tab to pull down a list, then select Set Auto-
Connect Printer. Windows Mac 42 Chapter 6 USB Application 4 ) Select the printer you share, then click Apply. Windows Mac 43 Chapter 6 USB Application 5 ) You will see the printer marked as Auto-Connect Printer. Now you can print with this printer. Tips:
Windows Mac The Print Server also allows different clients to share the scan feature of MFPs (Multi-Function Printers). To scan with TP-LINK USB Printer Controller, right-click the printer and select Network Scanner. Then, a scanning window will pop up. Finish the scanning process by following the on-screen instructions. 3G/4G Networking Sharing 6. 5. If you have a 3G/4G USB modem, the router can be used as a 3G/4G wireless router to share the 3G/4G network to local users. When the original network service fails, your router will be directly connected to the 3G/4G network. Follow the steps below to set your 3G/4G network:
1. Plug your USB modem into the USB port of your router. 2. Visit http://tplinkwifi.net, then log in with the username and password youve set for the router. 3. Go to Advanced > USB Settings > 3G/4G. 44 Chapter 6 USB Application 4. Verify that your USB 3G/4G modem is successfully identified. 5. Verify that the router has correctly recognized your Region and Mobile ISP. If so, you have successfully set the 3G/4G network. Otherwise, select the Region and Mobile ISP manually, or select the box of Set the Dial Number, APN, Username and Password manually and enter the information provided by your 3G/4G network service provider. 6. Select the Connection Mode if needed. The default mode is Connect Automatically. You can choose Connect on Demand or Connect Manually. 45 Chapter 6 USB Application If you choose Connect Manually, you need to click the Connect or Disconnect button to manually turn on or off the 3G/4G Internet. The network will automatically turn off when there is no Internet request in Max Idle Time. If you choose Connect on Demand, the network will automatically turn off when there is no Internet request in Max Idle Time, and turn on again when you attempt to access the Internet. 7. Click Save to make the settings effective. Note:
Do not change the Authentication Type, MTU Size and DNS Servers unless necessary. 46 Chapter 7 Parental Controls This function allows you to block inappropriate, explicit and malicious websites, and controls access to specified websites at specified time. Chapter 7 I want to:
I want How can I do that?
Parental Controls Control what types of websites my children or other home network users can visit and even the times of day they are allowed to access the Internet. For example, I want to allow my childrens devices (e.g. a computer or a tablet) to access only www.tp-link.com and Wikipedia.org from 18:00 (6PM) to 22:00 (10PM) at the weekend and not other times. 1. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 2. Go to Advanced > Parental Controls and enable Parental Controls. 3. Click Add. And then Click View Existing Devices, and select the access device. Or, input the Device Name and MAC Address manually. 4. Click the icon to set the Internet Access Time. Drag the cursor over the appropriate cell(s) and click OK. 48 Chapter 7 Parental Controls 5. Enter a Description for the entry. Keep the Enable This Entry checkbox available. Click OK. 6. Select the restriction policy. In Blacklist mode, the controlled devices cannot access any websites containing the specified keywords during the Internet Access Time period. In Whitelist mode, the controlled devices can only access websites containing the specified keywords during the Internet Access Time period. 7. Click
. Enter a keyword or a website and click Save. You can add up to 32 keywords for either Blacklist or Whitelist. Below are some sample entries to allow access. Enter a web address (e.g. wikipedia.org) or a web address keyword (e.g. wikipedia) to only allow or block access to the websites containing that keyword. Specify the domain suffix (eg. edu or .org) to allow access only to the websites with that suffix. 49 Chapter 7 Parental Controls If you wish to block all Internet browsing access, do not add any keyword to the Whitelist. Done!
Now you can control your childrens Internet access according to your needs. 50 Chapter 8 QoS (Quality of Service) This chapter introduces how to create a QoS rule to specify prioritization of traffic and minimize the impact caused when the connection is under heavy load. This chapter contains the following sections:
Prioritize Internet Traffic with Quality of Service Update the Database Chapter 8 QoS (Quality of Service) Prioritize Internet Traffic with QoS 8. 1. QoS (Quality of Service), is designed to ensure the efficient operation of the network when the network overload or congestion. I want to:
How can I do that?
Specify priority levels for some devices or applications. For example, I have several devices that are connected to my wireless network. I would like to:
Set my ftp server with faster surfing speed;
Set my phone an intermediate speed on the Internet. 1. Enable QoS and set bandwidth allocation. 1 ) Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 2 ) Go to Advanced > QoS > Settings. 3 ) Select the Enable QoS checkbox. 4 ) Input the maximum upload and download bandwidth provided by your service provider. 1Mbps is equal to 1000Kbps. 5 ) Click Advanced and drag the scroll bar to set the bandwidth priority percentage. Note:
Add each priority up no more than 100%. High priority is greater than Middle priority, and middle priority is greater than Low priority. 6 ) Click Save. 2. Add QoS Rules. 52 Chapter 8 QoS (Quality of Service) 1 ) Set a high priority rule for the ftp server. a . Click Add in the High Priority section. b . Select By Application and then select ftp in the list. Scroll down and click OK. Tips:
If your application isnt listed on the screen, scroll down and click Custom Application to add application manually. Name: Enter a name for your applicaiton. Protocol: Select the protocol for your application, if your are not sure, select ALL. Port: Enter the destination port for your application, usually each application has a fixed port, please ensure you enter the correct the port. In this case, the destination port for ftp is 21. 2 ) Set a middle priority rule for the phone. a . Click Add in the Middle Priority section. 53 Chapter 8 QoS (Quality of Service) b . Select By Device and then click View Existing Devices. c . Choose the respective device from the list. d . Click OK. Tips:
Done!
If you want to delete a QoS rule, click Now QoS is implemented to Prioritize Internet Traffic. to remove the responding rule from the list. 8. 2. Update the Database This function can help to add or update the applications of the router supports. If the applications you need are not listed in the Application list, you can try to download the new version and upgrade. New database versions are posted at www.tp-link.com and can be downloaded for free. 1. Download the latest QoS database from our website (www.tp-link.com). 2. Go to Advanced > QoS > Database. Click Browse to select the database upgrade file, then click Upgrade. Wait until the upgrade is completed and do not operate during the process. 54 Chapter 8 QoS (Quality of Service) 55 Chapter 9 Network Security This chapter guides you on how to protect your home network from cyber attacks and unauthorized users by implementing these three network security functions. You can protect your home network against DoS (Denial of Service) attacks from flooding your network with server requests using DoS Protection, block or allow specific client devices to access your network using Access Control, or you can prevent ARP spoofing and ARP attacks using IP & MAC Binding function. This chapter contains the following sections:
Protect the Network from Cyber Attacks Access Control IP & MAC Binding Chapter 9 Network Security Protect the Network from Cyber Attacks 9. 1. The SPI (Stateful Packet Inspection) Firewall and DoS (Denial of Service) Protection protect the router from cyber attacks. The SPI Firewall can prevent cyber attacks and validate the traffic that is passing through the router based on the protocol. This function is enabled by default, and its recommended to keep the default setting. DoS Protection can protect your home network against DoS attacks from flooding your network with server requests. Follow the steps below to configure DoS Protection. 1. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 2. Go to Advanced > Security > Settings. 3. Enable DoS Protection. 4. Set the level (Off, Low, Middle or High) of protection for ICMP-FLOOD Attack Filtering, UDP-FlOOD Attack Filtering and TCP-SYN-FLOOD Attack Filtering. ICMP-FLOOD Attack Filtering - Enable to prevent the Internet Control Message Protocol (ICMP) flood attack. UDP-FlOOD Attack Filtering - Enable to prevent the User Datagram Protocol
(UDP) flood attack. TCP-SYN-FLOOD Attack Filtering - Enable to prevent the Transmission Control Protocol-Synchronize (TCP-SYN) flood attack. Tips:
The level of protection is based on the traffic packets number. The protection will be triggered immediately when the number of packets exceeds the preset threshold value (the value can be set on Advanced > System Tools > System Parameters > DoS Protection Level Settings), and the vicious host will be displayed in the Blocked DoS Host List. 57 Chapter 9 Network Security 5. Select Ignore Ping Packet From WAN/LAN Port if you want to ignore the ping packets from WAN/LAN port. 6. Click Save to make the settings effective. 9. 2. Access Control Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed devices (Whitelist). I want to:
How can I do that?
Block or allow specific client devices to access my network (via wired or wireless). 1. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 2. Go to Advanced > Security > Access Control. 3. Enable Access Control. 4. Select the access mode to either block (recommended) or allow the device(s) in the list. To block specific device(s) 1 ) Select Blacklist and click Save. 2 ) Select the device(s) to be blocked in the Devices Online table by ticking the box. 58 Chapter 9 Network Security 3 ) Click Block above the Devices Online table. The selected devices will be added to Devices in Blacklist automatically. To allow specific device(s) 1 ) Select Whitelist and click Save. 2 ) Click Add in Devices in Whitelist section. Enter the Device Name and MAC Address (You can copy and paste the information from the following list if the device is connected to your network). 3 ) Click OK. Done!
Now you can block or allow specific client devices to access your network (via wired or wireless) using the Blacklist or Whitelist. 59 Chapter 9 Network Security IP & MAC Binding 9. 3. IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind network devices IP address to its MAC address. This will prevent ARP Spoofing and other ARP attacks by denying network access to an device with matching IP address in the Binding list, but unrecognized MAC address. I want to:
How can I do that?
Prevent ARP spoofing and ARP attacks. 1. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 2. Go to Advanced > Security > IP & MAC Binding. 3. Enable ARP Binding. 4. Bind your device(s) according to your need. To bind the connected device(s): Click corresponding device to the Binding List. To bind the unconnected device 1 ) Click Add in Binding List section. to add the 2 ) Enter the MAC address and IP address that you want to bind. 3 ) Tick the Enable This Entry check box and click OK. Now you dont need to worry about ARP spoofing and ARP attacks!
Done!
60 Chapter 10 NAT Forwarding Routers NAT (Network Address Translation) feature makes the devices in the LAN use the same public IP address to communicate in the Internet, which protect the local network by hiding IP addresses of the devices. However, it also brings about the problem that external host cannot initiatively communicate with the specified device in the local network. With forwarding feature the router can penetrate the isolation of NAT and allows the external hosts in the Internet to initiatively communicate with the devices in the local network, thus to realize some special functions. TP-LINK router includes four forwarding rules. If two or more rules are set, the priority of implementation from high to low is Virtual Servers, Port Triggering, UPNP and DMZ. This chapter contains the following sections:
Share Local Resources in the Internet by Virtual Server Open Ports Dynamically by Port Triggering Make Applications Free from Port Restriction by DMZ Make Xbox Online Games Run Smoothly by UPnP Chapter 10 NAT Forwarding 10. 1. Share Local Resources in the Internet by Virtual Server When you build up a server in the local network and want to share it on the Internet, Virtual Server can realize the service and provide it to the Internet users. At the same time virtual server can keep the local network safe as other services are still invisible from the Internet. Virtual server can be used for setting up public services in your local network, such as HTTP, FTP, DNS, POP3/SMTP and Telnet. Different service uses different service port. Port 80 is used in HTTP service, port 21 in FTP service, port 25 in SMTP service and port 110 in POP3 service. Please verify the service port number before the configuration. I want to:
How can I do that?
Share my personal website Ive built in local network with my friends through the Internet. For example, the personal website has been built in my home PC (192.168.0.100). I hope that my friends in the Internet can visit my website in some way. The PC is connected to the router with the WAN IP address 218.18.232.154. Personal Website Router LAN WAN: 218.18.232.154 Home 1. Assign a static IP address to your PC, for example 192.168.0.100. 2. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 3. Go to Advanced > NAT Forwarding > Virtual Servers. 4. Click Add. Click View Existing Services and select HTTP. The external port, internal port and protocol will be automatically filled with contents. Enter the PCs IP address 192.168.0.100 in the Internal IP field. 5. Click OK to save the settings. 62 Chapter 10 NAT Forwarding Done!
Tips:
1. It is recommended to keep the default settings of Internal Port and Protocol if you are not clear about which port and protocol to use. 2. If the service you want to use is not in the Service Type, you can enter the corresponding parameters manually. You should verify the port number that the service needs. 3. You can add multiple virtual server rules if you want to provide several services in a router. Please note that the External Port should not be overlapped. Users in the Internet can enter http:// WAN IP (in this example:
http:// 218.18.232.154) to visit your personal website. Tips:
1. WAN IP should be a public IP address. For the WAN IP is assigned dynamically by ISP, it is recommended to apply and register a domain name for the WAN refer to 12. 4. Set Up a Dynamic DNS Service Account. Then you can use http:// domain name to visit the website. 2. If you have changed the default External Port, you should use http:// WAN IP:
External Port or http:// domain name: External Port to visit the website. 10. 2. Open Ports Dynamically by Port Triggering Port triggering can specify a triggering port and its corresponding external ports. When a host in the local network initiates a connection to the triggering port, all the external ports will be opened for subsequent connections. The router can record the IP address of the host. When the data from the Internet return to the external ports, the router can forward them to the corresponding host. Port triggering is mainly applied to online games, VoIPs and video players. Common applications include MSN Gaming Zone, Dialpad and Quick Time 4 players, etc. Follow the steps below to configure the port triggering rules:
63 Chapter 10 NAT Forwarding 1. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 2. Go to Advanced > NAT Forwarding > Port Triggering and click Add. 3. Click View Existing Applications, and select the desired application. The external port, internal port and protocol will be automatically filled with contents. The following picture takes application MSN Gaming Zone as an example. 4. Click OK to save the settings. Tips:
1. You can add multiple port triggering rules according to your network need. 2. The triggering ports can not be overlapped. 3. If the application you need is not listed in the Existing Applications list, please enter the parameters manually. You should verify the external ports the application uses first and enter them into External Port field according to the format the page displays. 10. 3. Make Applications Free from Port Restriction by DMZ When a PC is set to be a DMZ (Demilitarized Zone) host in the local network, it is totally exposed to the Internet, which can realize the unlimited bidirectional communication between internal hosts and external hosts. The DMZ host becomes a virtual server with all ports opened. When you are not clear about which ports to open in some special applications, such as IP camera and database software, you can set the PC to be a DMZ host. 64 Chapter 10 Note:
NAT Forwarding DMZ is more applicable in the situation that users are not clear about which ports to open. When it is enabled, the DMZ host is totally exposed to the Internet, which may bring some potential safety hazard. If DMZ is not in use, please disable it in time. I want to:
How can I do that?
Make the home PC join the Internet online game without port restriction. For example, due to some port restriction, when playing the online games, you can login normally but cannot join a team with other players. To solve this problem, set your PC as a DMZ with all ports opened. 1. Assign a static IP address to your PC, for example 192.168.0.100. 2. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 3. Go to Advanced > NAT Forwarding > DMZ and select the checkbox to enable DMZ. 4. Enter the IP address 192.168.0.100 in the DMZ Host IP Address filed. Done!
5. Click Save to save the settings. The configuration is completed. Youve set your PC to a DMZ host and now you can make a team to game with other players. 10. 4. Make Xbox Online Games Run Smoothly by UPnP UPnP (Universal Plug and Play) protocol allows the applications or host devices to automatically find the front-end NAT device and send request to it to open the corresponding ports. With UPnP enabled, the applications or host devices in the both sides of NAT device can freely communicate with each other realizing the seamless connection of the network. You may need to enable the UPnP if you want to use applications for multiplayer gaming, peer-to-peer connections, real-time communication (such as VoIP or telephone conference) or remote assistance, etc. 65 Chapter 10 Tips:
NAT Forwarding 1. UPnP is enabled by default in this router. 2. Only the application supporting UPnP protocol can use this feature. 3. UPnP feature needs the support of operating system (e.g. Windows Vista/ Windows 7/ Windows 8, etc. Some of operating system need to install the UPnP components). For example, when you connect your Xbox to the router which has connected to the Internet to play online games, UPnP will send request to the router to open the corresponding ports allowing the following data penetrating the NAT to transmit. Therefore, you can play Xbox online games without a hitch. LAN WAN Xbox Router If necessary, you can follow the steps to change the status of UPnP. 1. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 2. Go to Advanced > NAT Forwarding > UPnP and toggle on or off according to your needs. 66 Chapter 11 VPN Server The VPN (Virtual Private Networking) Server allows you to access your home network in a secured way through Internet when you are out of home. The router offers two ways to setup VPN connection: OpenVPN and PPTP (Point to Point Tunneling Protocol) VPN. OpenVPN is somewhat complex but with greater security and more stable. It is suitable for restricted environment, such as campus network and company intranet. PPTP VPN is more easily used and its speed is faster, its compatible with most operating systems and also supports mobile devices. Its security is poor and your packets may be cracked easily, and PPTP VPN connection may be prevented by some ISP. Please choose the appropriate VPN server connection type according to your needs. This chapter contains the following sections:
Use OpenVPN to Access Your Home Network Use PPTP VPN to Access Your Home Network Chapter 11 VPN Server 11. 1. Use OpenVPN to Access Your Home Network In the OpenVPN connection, the home network can act as a server, and the remote client can access the server through the router which acts as an OpenVPN Server gateway. To use the VPN feature, you should enable OpenVPN Server on your router, and install and run VPN client software on the remote client. Please follow the steps below to set up an OpenVPN connection. Step1. Set up OpenVPN Server on Your Router 1. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 2. Go to Advanced > VPN Server > OpenVPN. And then Select Enable VPN Server. Note:
1. Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a static IP address for routers WAN port and synchronize your System Time with Internet. 2. The first time you configure the OpenVPN Server, you may need to Generate a certificate before you enable the VPN Server. 3. Select the Servive Type (communication protocol) for OpenVPN Server: UDP, TCP. 4. Enter a VPN Service Port to which a VPN client connects, and the port number should be between 1024 and 65535. Note:
If you have configured NAT Settings, please make sure the Service Port number is not the same as the external port of NAT Settings. 5. In VPN Subnet/Netmask field, enter the range of IP addresses that can be leased to the client by the OpenVPN server. 68 Chapter 11 VPN Server 6. Select your Client Access type., select Home Network Only if you only want the remote client to access your home network, select Internet and Home Network if the remote client also want to access Internet through VPN Server. 7. Click Save. 8. Click Generate to generate a new certificate. Note:
If you have already generated one, please skip this step, or click Generate to update the certificate. 9. Click Export to save the OpenVPN configuration file. Remote client will use this configuration file to access your router. Step 2. Configure OpenVPN Connection on Your Remote Client 1. Visit http://openvpn.net/index.php/download/community-downloads.html to download the OpenVPN software, and install it on your client where you want to run the OpenVPN client utility. Note:
You need to install the OpenVPN client utility on each client that you plan to use for VPN connections to your router. Mobile devices should download third-party app from Google Play or APP Store. 2. After the installation, copy the file exporting from your router to OpenVPN client utilitys config folder (for Windows): C:\Program Files\OpenVPN\config. The path is depending on where the OpenVPN client utility is installed on. 3. Run the OpenVPN client utility and connect it to OpenVPN Server. 11. 2. Use PPTP VPN to Access Your Home Network PPTP VPN Server is used to create a VPN connection for remote client. To use the VPN feature, you should enable PPTP VPN Server on your router, and configure the PPTP connection on the remote client. Please follow the steps below to set up a PPTP VPN connection. Step 1. Set up PPTP VPN Server on Your Router 1. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 2. Go to Advanced > VPN Server > PPTP VPN. And then select Enable VPN Server. 69 Chapter 11 VPN Server Note:
Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a static IP address for routers WAN port and synchronize your System Time with Internet. If you have configured NAT Settings, please make sure your external port of NAT settings is not 1723. 3. In the Client IP Address filed, enter the range of IP addresses (up to 10 clients) that can be leased to the client by the PPTP VPN server. 4. Enter the Username and Password to authenticate clients to the PPTP VPN server. 5. Click Save. Step 2. Configure PPTP VPN Connection on Your Remote Client Remote client can use Windows built-in PPTP software or third-party PPTP software to connect to PPTP Server. Here we use Windows built-in PPTP software as an example. 1. Go to Start > Control Panel > Network and Internet > Network and Sharing Center. 2. Select Set up a new connection or network. 70 Chapter 11 VPN Server 3. Select Connect to a workplace and click Next. 4. Select Use my Internet connection (VPN). 71 Chapter 11 VPN Server 5. Enter the WAN IP address of the router (for example: 218.18.1.73) in the Internet address field. Click Next. 6. Enter the User name and Password, its the username and password you have set on your router, and click Connect. 72 Chapter 11 VPN Server 7. The PPTP VPN connection is created and ready to use. 73 Chapter 12 Customize Your Network Settings This chapter guides you on how to configure advanced networking features that are available for this router. This chapter contains the following sections:
Change the LAN Settings Configure to Support IPTV Service Specify DHCP Server Settings Set Up a Dynamic DNS Service Account Create Static Routes Specify Wireless Settings Use WPS for Wireless Connection Chapter 12 Customize Your Network Settings 12. 1. Change the LAN Settings The router is preset with a default LAN IP 192.168.0.1, which you can use to log in to its web-based management page. The LAN IP address together with the Subnet Mask also defines the subnet that the connected devices are on. If the IP address conflicts with another device on your local network or your network requires a specific IP subnet, you can change it. 1. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 2. Go to Advanced > Network > LAN. 3. Type in a new IP Address appropriate to your needs. And Leave the Subnet Mask as the default settings. 4. Click Save. Note:
If you have set the Virtual Server, DMZ or DHCP address reservation, and the new LAN IP address is not in the same subnet with the old one, then you should reconfigure them. 12. 2. Configure to Support IPTV Service I want to:
How can I do that?
Configure IPTV setup to enable Internet / IPTV / Phone service provided by my Internet Service Provider (ISP). 1. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 2. Go to Advanced > Network > IPTV. 3. If your ISP provide the networking service based on IGMP technology, e.g., British Telecom(BT) and Talk Talk in UK:
1 ) Tick the IGMP Proxy checkbox and select the IGMP Version, either V2 or V3, according to the information provided by your ISP. 75 Chapter 12 Customize Your Network Settings 2 ) Click Save. 3 ) After configuring IGMP proxy, IPTV can work behind your router now. You can connect your set-top box to any of the routers Ethernet port. If IGMP is not the technology your ISP apply to provide IPTV service:
1 ) Tick the Enable IPTV check box. 2 ) Select the appropriate Mode according to your ISP. Select Bridge if your ISP is not listed and no other parameters are required, and then skip to Step 4. Select Custom if your ISP is not listed but provides necessary parameters. 3 ) After you have selected a mode, the necessary parameters are predetermined. You can perform other configuration, e.g. enter the IPTV Multicast VLAN ID and select the IPTV Multicast VLAN Priority in Russia mode according to your ISP. 4 ) For Singapore-ExStream, Malaysia-Unifi and Malaysia-Maxis mode, connect device to the predetermined LAN port. For Bridge and Custom mode, select the LAN type and connect the set-top box to the corresponding port. Russia, 5 ) Click Save. Done!
Your IPTV setup is done now! You may need other configurations on your set-top box before enjoying your TV. Tips Qos and IPTV cannot be enabled at the same time. 76 Chapter 12 Customize Your Network Settings 12. 3. Specify DHCP Server Settings By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices from the IP Address Pool. You can change the settings of DHCP Server if necessary, and you can reserve LAN IP address for specified client device. 1. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 2. Go to Advanced > Network > DHCP Server. To specify the IP address that the router assigns:
1. Make sure that the Enable DHCP Server checkbox is selected. 2. Enter the starting and ending IP address in the IP Address Pool. 3. Enter other parameters if the ISP offers, the Default Gateway is automatically filled and is the same as the LAN IP address of the router. 4. Click Save to make the settings effective. To reserve an IP address for a specified client device:
1. Click the Add button in Address Reservation section. 77 Chapter 12 Customize Your Network Settings 2. Click View Exsiting Devices or enter the MAC address of the client device. 3. Enter the IP address to set to the client device. 4. Enter the Description for the rule. 5. Tick the Enable This Entry checkbox and click OK. 12. 4. Set Up a Dynamic DNS Service Account Most ISPs (Internet service provieders) assign a dynamic IP address to the router and you can use this IP address to access your router remotely. However, the IP address can change any time and you dont know when it changes. In this case, you might need the DDNS (Dynamic Domain Name Server) feature on the router to allow you and your friends to access your router and local servers (FTP, HTTP, etc.) using domain name, in no need of checking and remembering the IP address. Note:
DDNS does not work if the ISP assigns a private WAN IP address (such as 192.168.1.x) to the router. To set up DDNS, please follow the instructions below:
1. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 2. Go to Advanced > Network > Dynamic DNS. 3. Select the DDNS Service Provider (NO-IP or DynDNS). If you dont have a DDNS account, select a service provider and click Go to register. 78 Chapter 12 Customize Your Network Settings 4. Enter the username, password and domain name of the account (such as lisadns. ddns.net). 5. Click Login and Save. Tips:
If you want to use a new DDNS account, please Logout first, then login with the new account. 12. 5. Create Static Routes Static routing is a form of routing that is configured manually by a network administrator or a user by adding entries into a routing table. The manually-configured routing information guides the router in forwarding data packets to the specific destination. I want to:
Visit multiple networks and multiple servers at the same time. For example, in a small office, my PC can surf the Internet, but I also want to visit my companys network. Now I have a switch and another router. I connect the devices as shown in the following figure so that the physical connection between my PC and my companys server is achieved. To surf the Internet and visit my companys network at the same time, I need to configure the static routing. Router 1 Router 2 PC 1 WAN: 172.30.30.100 LAN: 192.168.0.1 LAN: 192.168.0.2 Router 3 172.30.30.1 192.168.0.100 PC 2 79 Chapter 12 How can I do that?
Customize Your Network Settings 1. Change the routers LAN IP addresses to two different IP addresses on the same subnet. Disable Router 2s DHCP function. 2. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 3. Go to Network > Advanced Routing. 4. Click Add and finish the settings according to the following explanations:
Network Destination: The destination IP address that you want to assign to a static route. This IP address cannot be on the same subnet with the WAN IP or LAN IP of the router. In the example, the IP address of the company network is the destination IP address, so here enters 172.30.30.1. Subnet Mask: Determines the destination network with the destination IP address. If the destination is a single IP address, enter 255.255.255.255; otherwise, enter the subnet mask of the corresponding network IP. In the example, the destination network is a single IP, so here enters 255.255.255.255. Default Gateway: The IP address of the gateway device to which the data packets will be sent. This IP address must be on the same subnet with the routers IP which sends out the data. In the example, the data packets will be sent to the LAN port of Router 2 and then to the Server, so the default gateway should be 192.168.0.2. 80 Chapter 12 Customize Your Network Settings Interface: Determined by the port (WAN/LAN) that sends out the data packets. In the example, the data is sent to the gateway through the LAN port, so LAN should be selected. Description: Enter a description for this static routing entry. 5. Click OK to save the settings. 6. Check the System Routing Table below. If you can find the entry youve set in the System Routing Table, the static routing is set successfully. Done!
Open a web browser on your PC. Enter the company servers IP address to visit the company network. 12. 6. Specify Wireless Settings The routers wireless network name (SSID) and password, and security option are preset in the factory. The preset SSID and password can be found on the product label. You can customize the wireless settings according to your needs. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. To enable or disable the wireless function of 2.4GHz, 5GHz-1 or 5GHz-2:
1. Go to Basic > Wireless. 2. The wireless radio is enabled by default, if you want to disable the wireless function of the router, just clear the Enable Wireless Radio checkbox. In this case, all the wireless settings will be invalid. To change the wireless network name (SSID) and wireless password:
1. Go to Basic > Wireless. 2. Create a new SSID in Network Name (SSID) and customize the password for the network in Password. The default SSID is TP-LINK_XXXX for 2.4GHz, TP-LINK_XXXX_5G _1 for 5GHz-1, TP-LINK_XXXX_5G _2 for 5GHz-2, and the value is case-sensitive. 81 Chapter 12 Note:
Customize Your Network Settings If you use a wireless device to change the wireless settings, you will be disconnected when the settings are effective. Please write down the new SSID and password for future use. To hide SSID of 2.4GHz or 5GHz:
1. Go to Basic > Wireless. 2. Select Hide SSID, and your SSID will not broadcast. Your SSID wont display when you scan for local wireless network on your wireless device and you need to manually join the network. To change the working region for the router:
1. Go to Advanced > Wireless > Wireless Settings. 2. Select the Region from the drop-down list and click Save. Note:
Per FCC regulations, all Wi-Fi products marketed in the U.S. are fixed to the U.S. region. To change the security option:
1. Go to Advanced > Wireless > Wireless Settings. 82 Chapter 12 Customize Your Network Settings 2. Select the wireless network 2.4GHz, 5GHz-1 or 5GHz-2. 3. Select an option from the Security dropdown list. The router provides four security options, No Security, WPA/WPA2 - Personal (Recommended), WPA/WPA2 - Enterprise and WEP. We recommend you dont change the default settings unless necessary. If you select other options, configure the related parameters according to the help page. In addition Mode - Select a transmission mode according to your wireless client devices. 802.11b/g/n mixed, 802.11g/n mixed or 802.11n only for 2.4GHz; and 802.11a/n/ac mixed, 802.11n/ac mixed or 802.11ac only for 5GHz. It is recommended to just leave it as default. Channel Width - Select a channel width (bandwidth) for the wireless network. Channel - Select an operating channel for the wireless network. It is recommended to leave the channel to Auto, if you are not experiencing the intermittent wireless connection issue. Transmit Power - Select either High, Middle or Low to specify the data transmit power. The default and recommended setting is High. 12. 7. Use WPS for Wireless Connection Wi-Fi Protected Setup (WPS) gives consumers an easier approach to set up a security-
protected Wi-Fi connection. 1. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 83 Chapter 12 Customize Your Network Settings 2. Go to Advanced > Wireless > WPS . 12. 7. 1. Set the Routers PIN Routers PIN is enabled by default to allow wireless devices to connect to the router using the PIN. You can use the default one or generate a new one. Note:
1. If you want to enable/disable the WPS feature, go to System Tools > System Parameters > WPS, select or clear the Enable WPS check box. 2. PIN (Personal Identification Number) is an eight-character identification number preset to each router. WPS supported devices can connect to your router with the PIN. The default PIN is labeled on the bottom of the router. 12. 7. 2. Use the WPS Wizard for Wi-Fi Connections 1. Select a setup method:
Push Button(Recommended): Click the Connect button on the screen. Within two minutes, push the WPS button on the client device. PIN: Enter the clients PIN, and click Connect. 2. Success will appear on the above screen and the WPS LED on the router will keep on for five minutes if the client has been successfully added to the network. 12. 8. Schedule Your Wireless Function The wireless network (2.4GHz, 5GHz-1 and 5GHz-2) can be automatically off at a specific time when you do not need the wireless connection. 1. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 2. Go to Advanced > Wireless > Wireless Schedule. 3. Select 2.4GHz, 5GHz-1 or 5GHz-2 to change the corresponding settings. 4. Toggle On to enable the Wireless Schedule feature. 84 Chapter 12 Customize Your Network Settings 5. Click the icon to set the Effective Time. Drag the cursor over the cells to choose the period during which you need the wireless off automatically, and click OK. 6. Click Save. Note:
1. The Effective Time Schedule is based on the time of the router. You can go to Advanced > System Tools > Time Settings to modify the time. 2. 2. If you just set time for one wireless band, the other two wireless bands are still always on. So set time for other two bands to schedule your whole wireless networks. 3. The wireless LED will be off if the corresponding wireless network is disabled. 4. The wireless network will be automatically turned on after the time period you set. 85 Chapter 13 Manage the Router This chapter will show you the configuration for managing and maintaining your router. This chapter includes the following sections:
Set Up System Time Test the Network Connectivity Upgrade the Firmware Backup and Restore Configuration Settings Change the Administrator Account Password Recovery Local Management Remote Management System Log Monitor the Internet Traffic Statistics Control LEDs Chapter 13 Manage the Router 13. 1. Set Up System Time System time is the time displayed while the router is running. The system time you configure here will be used for other time-based functions like Parental Controls. You can manually set how to get the system time. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. Go to Advanced > System Tools > Time Settings. To automatically synchronize the time:
1. In the Set Time field, select Get automatically from the Internet. 2. Select your local Time Zone from the drop-down list. 3. In the NTP Server I fileld, enter the IP address or domain name of your desired NTP Server. 4. In the NTP Server II fileld, enter the IP address or domain name of the second NTP Server. (Optional) 5. Click Obtion to get the current Interent time. 6. Click Save to make the settings effective. To manually set the date and time:
1. In the Set Time field, select Manually. 87 Chapter 13 Manage the Router 2. Set the current Date (In MM/DD/YYYY format). 3. Set the current Time (In HH/MM/SS format). 4. Click Save to make the settings effective. To set up Daylight Saving Time:
1. Select Enable Daylight Saving Time. 2. Select the correct Start date and time when daylight saving time starts at your local time zone. 3. Select the correct End date and time when daylight saving time ends at your local time zone. 4. Click Save to make the settings effective. 13. 2. Test the Network Connectivity Diagnostics is used to test the connectivity between the router and the host or other network devices. 1. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 2. Go to Advanced > System Tools > Diagnostics. 88 Chapter 13 Manage the Router 3. Enter the information with the help of page tips:
1 ) Choose Ping or Traceroute as the diagnostic tool to test the connectivity;
Ping is used to test the connectivity between the router and the tested host, and measure the round-trip time. Traceroute is used to display the route (path) your router has passed to reach the tested host, and measure transit delays of packets across an Internet Protocol network. 2 ) Enter the IP Address or Domain Name of the tested host. 4. Click Start to begin the diagnostics. Tips:
Click Advanced, you can modify the ping count, ping packet size or the Traceroute Max TTL. Its recommended to keep the default value. The figure below indicates the proper connection between the router and the Yahoo server (www.Yahoo.com) tested through Ping. The figure below indicates the proper connection between the router and the Yahoo server (www.Yahoo.com) tested through Traceroute. 89 Chapter 13 Manage the Router 13. 3. Upgrade the Firmware TP-LINK is dedicated to improving and richening the product features, giving you a better network experience. We will release the latest firmware at TP-LINK official website, you can download the latest firmware file from the Support page of our website www. tp-link.com and upgrade the firmware to the latest version. Note:
1. Make sure the latest firmware file is matched with the hardware version (as shown in the webpage). 2. Make sure that you have a stable connection between the router and your computer. It is NOT recommended to upgrade the firmware wirelessly. 3. Make sure you remove any USB storage device connected to the router before the firmware upgrade to prevent data loss. 4. Backup your router configuration. 5. Do NOT turn off the router during the firmware upgrade. Follow the steps to upgrade the firmware. 1. Download the latest firmware file for the router from our website www.tp-link.com. 2. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 3. Go to Advanced > System Tools > Firmware Upgrade. 4. Click Browse to locate the downloaded new firmware file, and click Upgrade. 5. Wait a few moments for the upgrading and rebooting. 13. 4. Backup and Restore Configuration Settings The configuration settings are stored as a configuration file in the router. You can backup the configuration file to your computer for future use and restore the router to a previous settings from the backup file when needed. Moreover, if necessary you can erase the current settings and reset the router to the default factory settings. 1. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 2. Go to Advanced > System Tools > Backup & Restore. 90 Chapter 13 Manage the Router To backup configuration settings:
Click Backup to save a copy of the current settings to your local computer. A .bin file of the current settings will be stored to your computer. To restore configuration settings:
1. Click Browse to locate the backup configuration file stored on your computer, and click Restore. 2. Wait a few moments for the restoring and rebooting. Note: During the restoring process, do not turn off or reset the router. To reset the router to factory default settings:
1. Click Factory Restore to reset the router. 2. Wait a few moments for the reset and reboot. Note:
1. During the resetting process, do not turn off or reset the router. 2. We strongly recommend you backup the current configuration settings before resetting the router. 13. 5. Change the Administrator Account The account management feature allows you to change your login username and password of the web-based management page. 1. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router before. 91 Chapter 13 Manage the Router 2. Go to Advanced > System Tools > Administration and focus on the Account Management section. 3. Enter the old username and old password. Enter the new username and enter the new password twice (both case-sensitive). Click Save. 4. Use the new username and password for the following logins. 13. 6. Password Recovery This feature allows you to recover your login username and password in case you forget them. 1. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 2. Go to Advanced > System Tools > Administration and focus on the Password Recovery section. 3. Select the Enable Password Recovery checkbox. 4. Specify a mailbox (From) to send the recovery letter and enter its SMTP Server address. Specify a mailbox (To) to receive the recovery letter. If the mailbox (From) to send the recovery letter requires encryption, select Enable Authentication and enter its username and password. Tips:
SMTP server is available for users in most webmail systems. For example, the SMTP server address of Gmail is smtp.gmail.com. You can refer to their Help page to learn the SMTP server address. Generally, Enable Authentication should be selected if the login of the mailbox requires username and password. 92 Chapter 13 Manage the Router 5. Click Save to make the settings effective. You can click Test Email to test whether the configuration is successful. To recover your login username and password, please refer to FAQ. 13. 7. Local Management This feature allows you to limit the number of client devices on your LAN from accessing the router using the MAC address-based authentication. 1. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 2. Go to Advanced > System Tools > Administration and complete the settings In Local Management section according to your needs. Allow all LAN connected devices to manage the router:
Toggle on Access for All LAN Connected Devices. Allow specific devices to manage the router:
1 ) Toggle off Access for All LAN Connected Devices. 2 ) Click Add. 93 Chapter 13 Manage the Router 3 ) Click View Existing Devices and select the device to manage the router from the Existing Devices list, or enter the MAC address of the device manually. 4 ) Specify a Description for this entry. 5 ) Tick the Enable This Entry checkbox. 6 ) Click OK to make the settings effective. 13. 8. Remote Management This feature allows you to control remote devices authority to manage the router. 1. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 2. Go to Advanced > System Tools > Administration and complete the settings In Remote Management section according to your needs. 94 Chapter 13 Manage the Router Forbid all devices to manage the router remotely: Select Disable Remote Management and click Save. Allow all devices to manage the router remotely:
1 ) Select Enable Remote Management for All Devices. 2 ) Enter Web Management Port (1024-65535 or 80). 3 ) Click Save. Devices on the Internet can log in to http://Routers WAN IP address:port number (such as http://113.116.60.229:1024) to manage the router. Tips:
1. You can find the WAN IP address of the router on Basic > Network Maps > Internet. 2. The routers WAN IP is usually a dynamic IP. Please refer to Set Up a Dynamic DNS Service Account if you want to log in to the router through a domain name. Allow specific devices to manage the router remotely:
1 ) Select Enable Remote Management for Specified Devices. 2 ) Enter Web Management Port (1024-65535 or 80). 3 ) In Remote Management IP address, enter the IP address of the remote device to manage the router. 4 ) Click Save. Devices using this WAN IP can manage the router by logging in to http://Routers WAN IP:port number (such as http://113.116.60.229:1024). Tips:
The routers WAN IP is usually a dynamic IP. Please refer to Set Up a Dynamic DNS Service Account if you want to log in to the router through a domain name. 13. 9. System Log When the router does not work properly, you can save the system log and send it to the technical support for troubleshooting. To Save the System Log in Local:
1. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 2. Go to Advanced > System Tools > System Log. 3. Choose the type and level of the system logs according to your need. 4. Click Save Log to save the system logs to local. 95 Chapter 13 Manage the Router To Send the System Log to a Mailbox at a Fixed Time:
For example, I want to check my routers working status at a fixed time every day. However, its too troublesome to login to the web interface every time I want to go checking. It would be great if the system logs could be sent to my mailbox at 8 a.m. every day. 1. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 2. Go to Advanced > System Tools > System Log. 3. Click Mail Settings. 4. Enter the information with the help of page tips:
96 Chapter 13 Manage the Router 1 ) From: Enter the email address used to send the system log. 2 ) To: Enter the recipients email address, which can be the same to or different from the senders email address. 3 ) SMTP Server: Enter the SMTP server address. Tips: SMTP server is available for users in most webmail systems. For example, the SMTP server address of Hotmail is smtp-mail.outlook.com. You can refer to their Help page to learn the SMTP server address. 4 ) Select Enable Authentication. Tips: Generally, Enable Authentication should be selected if the login of the mailbox requires username and password. 5 ) Username: Enter the email address used to send the system log. 6 ) Password: Enter the password to login the senders email address. 7 ) Select Enable Auto Mail. Tips: The router will send the system log to the designated email address if this option is enabled. 8 ) Set a fixed time. The recipient will receive the system log sent at this time every day. 5. Click Save. 13. 10. Monitor the Internet Traffic Statistics The Traffic Statistics page displays the network traffic of the LAN, WAN and WLAN sent and received packets, allows you to monitor the volume of Internet traffic statistics. 1. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 2. Go to Advanced > System Tools > Traffic Statistics. 97 Chapter 13 Manage the Router 3. Toggle on Traffic Statistics, and then you can monitor the traffic statistics in Traffic Statistics List section. Click Refresh to update the statistic information on the page. Click Reset All to reset all statistic values in the list to zero. Click Delete All to delete all statistic information in the list. Click Click to reset the statistic information of the specific device. to delete the specific device item in the list. 13. 11. Control LEDs The router LEDs indicate router activities and behavior. You can turn on or turn off the router from the web-based management page. To turn on or turn off the LEDs:
of the router about 2 seconds to turn on or off the Press the LED button LEDs. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. Click the LED icon on the top right of the page. 98 Chapter 13 Manage the Router To turn off LEDs during Night Mode Period:
1 ) Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 2 ) Go to Advanced > System Tools > System Parameters. 3 ) In the LED Control section, select the Enable Night Mode checkbox. 4 ) Specify a time period in the Night Mode Period according to your needs, and the LEDs will be off during the period. 5 ) Click Save to make the settings effective. 99 FAQ Q1. What can I do if I forgot my wireless password?
The default password is labeled at the bottom of the router. If the password has been altered, please connect the router to the computer using a cable and follow the steps below:
1. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 2. Go to Advanced > Wireless > Wireless Settings, locate the password on the loading page, and mark down your new password for future use. Q2. How to retrieve the username and password of the web management page?
The default username and password of the web management page are admin (in lower case). If the password has been altered, please follow the steps below:
If you have altered the login username and password, and Password Recovery is enabled:
Note: Ensure the Internet access is available before using this method. 1. Visit http://tplinkwifi.net;
2. Click Forget password > Send Code, the verification code will be sent to the mailbox you set when enabling Password Recovery;
3. Login to your mailbox to copy the verification code;
4. Paste the verification code on the window which pops up in Step 2;
5. Click Confirm (the login username and password will be reset as admin after the click);
6. Enter admin (in lower case) as both username and password to login. Tips: Please refer to Password Recovery to learn how to configure Password Recovery. If you have altered the username and password but Password Recovery is disabled:
1. Reset the router to factory default settings: Press and hold the Reset button for about 7 seconds and then release;
2. Visit http://tplinkwifi.net, enter admin (in lower case) as both username and password to login. Note: Youll need to reconfigure the router to surf the Internet once the router is reset, and please mark down your new password for future use. Q3. I cannot login to the routers web management page, what can I do?
This can happen for a variety of reasons, please try the methods below and try again. 100 Make sure the router connects to the computer correctly and the corresponding LED indicator(s) light up. Make sure the IP address of your computer is configured as Obtain an IP address automatically and Obtain DNS server address automatically. Make sure the http://tplinkwifi.net you input is right. Check your computers settings:
1 ) Go to Start > Control Panel > Network and Internet, and click View network status and tasks;
2 ) Click Internet Options on the bottom left;
3 ) Click Connections, select Never dial a connection;
4 ) Click LAN settings, deselect the following three options and click OK;
101 5 ) Go to Advanced > Restore advanced settings, click OK to save the settings. Change a web browser or computer and login again. Reset the router to factory default settings and try again. If login still fails, please contact the technical support. Note: Youll need to reconfigure the router to surf the Internet once the router is reset. 102 Q4. How to use the WDS Bridging function to extend my wireless network?
For example, my house covers a large area. The wireless network coverage of the router Im using (the root router) is limited. I want to use an extended router to extend the wireless network of the root router. Note:
WDS bridging only requires configuration on the extended router;
WDS bridging function can be enabled either in 2.4GHz frequency or 5GHz frequency for a dual-band router. We use the WDS bridging function in 2.4GHz frequency as an example. 1. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 2. Configure the IP address of the router:
1 ) Go to Advanced > Network > LAN, configure the IP address of the extended router to be in the same subnet with the root router; (For example, the IP address of the root router is 192.168.0.1, the IP address of the extended router can be 192.168.0.2~192.168.0.254. We take 192.168.0.2 as example.) 2 ) Click Save. Note: Login to the web management page again if the IP address of the router is altered. 3. Survey the SSID to be bridged:
1 ) Go to Advanced > System Tools > System Parameters and focus on the 2.4GHz WDS section, click Enable WDS Bridging;
2 ) Click Survey, locate the root routers SSID and click Choose (Here we take TP-
LINK_2512 as example);
3 ) If the root router has wireless password, you should enter the wireless password of the root router;
4 ) Click Save. 103 4. Disable DHCP:
1 ) Go to Network > DHCP Server. 2 ) Deselect Enable DHCP Server and click Save. Now you can go to Advanced > Status > Wireless to check the WDS status. When the WDS status is Run, it means WDS bridging is successfully built. Q5. I cannot access the Internet even though the configuration is finished, what can I do?
1. Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 2. Go to Advanced > Status to check Internet status:
As the follow picture shows, if IP Address is a valid IP address, please try the methods below and try again:
104 Your computer might not recognize any DNS server addresses, please manually configure DNS server. 1 ) Go to Advanced > Network > DHCP Server. 2 ) Enter 8.8.8.8 as Primary DNS, click Save. Tips: 8.8.8.8 is a safe and public DNS server operated by Google. Power cycle the modem and the TP-LINK router. 1 ) Power off your modem and TP-LINK router, leave them off for 1 minute. 2 ) Power on your modem first, wait about 2 minutes until it get a solid cable or Internet light. 3 ) Power back TP-LINK router. 4 ) Wait another 1 or 2 minutes and check the Internet access. Reset the router to factory default settings and reconfigure the router with the help of Quick Setup. Please refer to Upgrade the Firmware to upgrade the firmware of the router. Check the TCP/IP settings on the particular device if all other devices can get Internet from the router. As the follow picture shows, if the IP Address is 0.0.0.0, please try the methods below and try again:
105 Make sure the physical connection between the router and the modem is proper Clone the MAC address of your computer. 1 ) Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 2 ) Go to Advanced > Network > Internet and focus on the MAC Clone section. 3 ) Choose an option to your need (Enter the MAC address if Use Custom MAC Address is selected), and click Save. Tips:
Some ISP will register the MAC address of your computer when you access the Internet for the first time through their Cable modem, if you add a router into your network to share your Internet connection, the ISP will not accept it as the MAC address is changed, so we need to clone your computers MAC address to the router. The MAC addresses of a computer in wired connection and wireless connection are different. Modify the LAN IP address of the router. Note:
Most TP-LINK routers use 192.168.0.1/192.168.1.1 as their default LAN IP address, it may be conflicting with the IP range of your existent ADSL modem/router. If so, the router is not able to communicate with your modem and cause you cant access the Internet. To resolve this problem, we need to change the LAN IP address of the router to avoid such conflict, for example, 192.168.2.1. 106 1 ) Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 2 ) Go to Advanced > Network > LAN. 3 ) Modify the LAN IP address as the follow picture shows. Here we take 192.168.2.1 as an example. 4 ) Click Save. Power cycle the modem and the TP-LINK router. 1 ) Power off your modem and TP-LINK router, leave them off for 1 minute. 2 ) Power on your modem first, wait about 2 minutes until it get a solid cable or Internet light. 3 ) Power back TP-LINK router. 4 ) Wait another 1 or 2 minutes and check the Internet access. Double check the Internet Connection Type. 1 ) Confirm your Internet Connection Type, which can be learned from the ISP. 2 ) Visit http://tplinkwifi.net, and log in with the username and password youve set for the router. 3 ) Go to Advanced > Network > Internet. 4 ) Select your Internet Connection Type and fill in other parameters with the help of page tips. 5 ) Click Save. 107 6 ) Power cycle the modem and the TP-LINK router again. Please refer to Upgrade the Firmware to upgrade the firmware of the router. If youve tried every method above but cannot access the Internet, please contact the technical support. Q6. I cannot find my wireless network or I cannot connect the wireless network, what can I do?
If you fail to find any wireless network, please follow the steps below:
Make sure the wireless function is enabled if youre using a laptop with built-in wireless adapter. You can refer to the relevant document or contact the laptop manufacturer. Make sure the wireless adapter driver is installed successfully and the wireless adapter is enabled. On Windows 7 1 ) If you see the message No connections are available, it is usually because the wireless function is disabled or blocked somehow;
2 ) Clicking on Troubleshoot and windows might be able to fix the problem by itself. On Windows XP 1 ) If you see the message Windows cannot configure this wireless connection, this is usually because windows configuration utility is disabled or you are running another wireless configuration tool to connect the wireless;
2 ) Exit the wireless configuration tool (the TP-LINK Utility, for example);
108 3 ) Select and right click on My Computer on desktop, select Manage to open Computer Management window;
4 ) Expand Services and Applications > Services, find and locate Wireless Zero Configuration in the Services list on the right side;
5 ) Right click Wireless Zero Configuration, and then select Properties;
6 ) Change Startup type to Automatic, click on Start button and make sure the Service status is Started. And then click OK;
If you can find other wireless network except your own, please follow the steps below:
Check the WLAN LED indicator on your wireless router/modem. Make sure your computer/device is still in the range of your router/modem, move closer if it is currently too far away. Go to Advanced > Wireless > Wireless Settings, and check the wireless router settings, double check your Wireless Network Name, make sure the Region is selected correctly and wireless is not hided. Note:
Different countries have different laws about wireless channel. For example, USA allows 2.4GHz channel from 1 to 11, while UK allows from 1 to 13. If you select the Region as UK or the Channel as 12/13 while you are in USA, your computer might not be able to pick up the signal. 109 If you can find your wireless network but fail to connect, please follow the steps below:
Authenticating problem, password mismatch:
1 ) Sometimes it will ask you to type in a PIN number when you connect to the wireless network for the first time. This PIN number is different from the Wireless Password/Network Security Key, usually you can only find it on the back of your wireless router. 110 2 ) If you cannot find the PIN or PIN failed, you may choose Connecting using a security key instead, and then type in the Wireless Password/Network Security Key. 3 ) If it continues on saying Network Security Key Mismatch, it is suggested to confirm the wireless password of your wireless router. Note: Wireless Password/Network Security Key is case sensitive. Windows was unable to connect to XXXX / Can not join this network / Taking longer than usual to connect to this network:
Check the wireless signal strength of your network, if it is weak (1~3 bars), please move the router closer and try again. Change the wireless Channel of the router to 1,6,or 11 to reduce interference from other networks. Re-install or update the driver for your wireless adapter of the computer. Q7. What can I do if I cannot access the USB disk after I modify the Authentication settings?
This situation probably happens on your Windows computer due to its special credential mechanism. Once you successfully access the USB disk, the connection will be temporarily recorded and you will be refused to access the USB disk with another account. You can follow either method below to solve this problem:
Method 1: Log off (sign out) from the Windows to delete the temporary connection record. Method 2: (Only for Local Storage Sharing) Change the Address of the USB Disk by referring to To Customize the Address of the USB Disk. Q8. What can I do if I am still required to enter the password for USB access even though I have selected Remember my credentials in my 111 Windows computer?
Because of Windows special credential mechanism, if the USB access username you set is the same as the Windows account name, Windows will be unable to remember the password you set for the USB. To solve this problem, you can set a different USB access username or make the USB access password the same as your Windows account. After you modify the access account, remember to log off (sigh out) from the Windows. Q9. Why am I never required to enter the account information for USB access even though I have enabled the Authentication feature?
This situation probably happens on your Windows computer due to its special credential mechanism. If your USB access username and password are both the same as your Windows account, the Windows will automatically use its account information to access the USB disk. Therefore, you will have no need to enter the username and password. 112 Specifications Hardware Ethernet Ports USB Port Four 10/100/1000Mbps LAN Ports One 10/100/1000Mbps WAN Port One USB 3.0 Port One USB 2.0 Port Button WPS Button, Reset Button, Wireless On/Off Button, LED On/Off Button, Power On/Off Button External Power Supply 12V/5A Dimensions (W x D x H) 230mm230mm43mm Antenna Four dual band Fixed antennas & Four single band Fixed antennas Wireless Wireless Standards IEEE 802.11ac/n/a 5GHz, IEEE 802.11b/g/n 2.4GHz Frequency Signal Rate Transmit Power 2.4GHz, 5GHz Band 1&4 2166Mbps at 5GHz, 1000Mbps at 2.4GHz CE: <20dBm(2.4GHz), <23dBm(5GHz) FCC: <30dBm Reception Sensitivity 5GHz: 11a 6Mbps: -91dBm; 11a 54Mbps: -73dBm; 11n HT20: -69dBm; 11n HT40: -67dBm;
11ac HT20: -66dBm; 11ac HT40: -61dBm; 11ac HT80: -58dBm 2.4GHz: 11g 54Mbps: -76dBm; 11n HT20: -73dBm; 11n HT40: -71dBm Wireless Function Enable/Disable Wireless Radio, WDS Bridge, WMM, Wireless Statistics Wireless Security 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA-PSK2 encryptions WAN Type DHCP Dynamic IP/Static IP/PPPoE/PPTP(Dual Access)/L2TP(Dual Access)/Bigpond Server, DHCP Client List, Address Reservation Software Quality of Service WMM, Bandwidth Control Port Forwarding Virtual Server, Port Triggering, UPnP, DMZ Dynamic DNS DynDns, NO-IP VPN PPTP, Open VPN Access Control Parental Control, Local Management Control, Host list, Access Schedule, Rule Management Firewall Security DoS, SPI Firewall, IP Address Filter/Domain Filter, IP and MAC Address Binding Protocols Supports IPv4 and IPv6 USB Sharing Management Supports Samba(Storage)/FTP Server/Media Server/Printer Server Access Control, Local Management, Remote Management Guest Network 2.4GHz guest network x 1, 5GHz guest network x 1 Environment Operating Temperature Storage Temperature Operating Humidity 0~40 (32 ~104)
-40~70 (-40 ~158) 10%~90% non-condensing Storage Humidity 5%~90% non-condensing 113 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright 2015 TP-LINK TECHNOLOGIES CO., LTD. All rights reserved. 114 FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-
located or operating in conjunction with any other antenna or transmitter. 115 The device operates in 2.4 ~ 2.4835 GHz / 5.15 ~ 5.25 GHz / 5.725 5.85 GHz frequency range. It is restricted in indoor environment only. This device meets all the other requirements specified in Part 15C / E, Section 15.247 / 15.407 of the FCC Rules. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. RF Exposure Information This device meets the EU requirements (1999/519/EC) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 20 cm from your body. National Restrictions This device is intended for home and office use in all EU countries (and other countries following the EU directive 1999/5/EC) without any limitation except for the countries mentioned below:
Country Belarus Norway Restriction Not implemented Implemented Italy Implemented Russian Federation Limited implementation Ukraine Limited implementation Reason/remark This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-lesund on Svalbard. The public use is subject to general authorisation by the respective service provider. 1. SRD with FHSS modulation 1.1. Maximum 2.5 mW e.i.r.p. 1.2. Maximum 100 mW e.i.r.p. Permitted for use SRD for outdoor applications without restriction on installation height only for purposes of gathering telemetry information for automated monitoring and resources accounting systems. Permitted to use SRD for other purposes for outdoor applications only when the installation height is not exceeding 10 m above the ground surface. 1.3.Maximum 100 mW e.i.r.p. Indoor applications. 2. SRD with DSSS and other than FHSS wideband modulation 2.1. Maximum mean e.i.r.p. density is 2 mW/MHz. Maximum 100 mW e.i.r.p. 2.2. Maximum mean e.i.r.p. density is 20 mW/MHz. Maximum 100 mW e.i.r.p. It is permitted to use SRD for outdoor applications only for purposes of gathering telemetry information for automated monitoring and resources accounting systems or security systems. 2.3. Maximum mean e.i.r.p. density is 10 mW/MHz. Maximum 100 mW e.i.r.p. Indoor applications. e.i.r.p. 100 mW with built-in antenna with amplification factor up to 6 dBi. 116 ATTENTION: Due to EU law, the country settings must be identical to the country where the device is operating (important due to non-harmonised frequencies in the EU). Restricted to indoor use. Canadian Compliance Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux norms CNR exemptes de licence dIndustrie Canada. Le fonctionnement est soumis aux deux conditions suivantes:
1. cet appareil ne doit pas provoquer dinterfrences et 2. cet appareil doit accepter toute interfrence, y compris celles susceptibles de provoquer un fonctionnement non souhait de lappareil. Caution:
1. The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
2. For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;
3. For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; and The high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. DFS (Dynamic Frequency Selection) products that operate in the bands 5250- 5350 MHz, 5470-5600MHz, and 5650-5725MHz. Avertissement:
1. Le dispositif fonctionnant dans la bande 5150-5250 MHz est rserv uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
2. Le gain maximal dantenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant les bandes 5250-5350 MHz et 5470-5725 MHz doit se conformer la limitation P.I.R.E.;
117 3. Le gain maximal dantenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5725-5850 MHz doit se conformer la limitation P.I.R.E spcifie pour lexploitation point point et non point point, selon le cas. En outre, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. Les produits utilisant la technique dattnuation DFS (slection dynamique des frquences) sur les bandes 5250- 5350 MHz, 5470-5600MHz et 5650-5725MHz. Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration dexposition aux radiations:
Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Industry Canada Statement CAN ICES-3 (B)/NMB-3(B) Korea Warning Statements:
. NCC Notice & BSMI Notice:
5.25GHz5.35GHz 5.250~5.350GHz 118
,
. Safety Information When product has power button, the power button is one of the way to shut off the product; when there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source. Dont disassemble the product, or make repairs yourself. You run the risk of electric shock and voiding the limited warranty. If you need service, please contact us. Avoid water and wet locations. Adapter shall be installed near the equipment and shall be easily accessible. The plug considered as disconnect device of adapter. Use only power supplies which are provided by manufacturer and in the original packing of this product. This product can be used in the following countries:
AT ES LT RU BG FI LV SE BY FR MT SG CA GB NL SK CZ GR NO TR DE HU PL UA DK IE PT US EE IT RO 119 TP-LINK TECHNOLOGIES CO., LTD DECLARATION OF CONFORMITY For the following equipment:
Product Description: AC5400 Wireless Tri-Band MU-MIMO Gigabit Router Model No.: Archer C5400 Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the product within the scope of Council Directives:
Directives 1999/5/EC, Directives 2004/108/EC, Directives 2006/95/EC, Directives 1999/519/EC, Directives 2011/65/EU The above product is in conformity with the following standards or other normative documents EN 300 328 V1.8.1 EN 301 489-1 V1.9.2 & EN 301 489-17 V2.2.1 EN 55022: 2010 + AC: 2011 EN 55024: 2010 EN 60950-1: 2006 + A11: 2009 + A1: 2010 + A12: 2011 + A2: 2013 EN 50385: 2002 EN 301 893 V1.7.1 The product carries the CE Mark:
Person responsible for making this declaration:
Yang Hongliang Product Manager of International Business Date of issue: 2015/11/11 TP-LINK TECHNOLOGIES CO., LTD Building 24 (floors 1, 3, 4, 5), and 28 (floors 1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2016-08-04 | 2412 ~ 2462 | DTS - Digital Transmission System | Class II permissive change or modification of presently authorized equipment |
2 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | ||
3 | 2015-11-20 | 5745 ~ 5825 | DTS - Digital Transmission System | Original Equipment |
4 | 5180 ~ 5240 | NII - Unlicensed National Information Infrastructure TX |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 4 | Effective |
2016-08-04
|
||||
1 2 3 4 |
2015-11-20
|
|||||
1 2 3 4 | Applicant's complete, legal business name |
TP-Link Technologies Co., Ltd.
|
||||
1 2 3 4 | FCC Registration Number (FRN) |
0013661145
|
||||
1 2 3 4 | Physical Address |
Building 24 (floors 1,3,4,5) and 28 (floors1-4)
|
||||
1 2 3 4 |
Shenzhen, N/A 518057
|
|||||
1 2 3 4 |
China
|
|||||
app s | TCB Information | |||||
1 2 3 4 | TCB Application Email Address |
t******@timcoengr.com
|
||||
1 2 3 4 |
T******@TIMCOENGR.COM
|
|||||
1 2 3 4 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 3 4 | Grantee Code |
TE7
|
||||
1 2 3 4 | Equipment Product Code |
C5400
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 4 | Name |
J****** H****
|
||||
1 2 3 4 | Title |
Regulatory Compliance Manager
|
||||
1 2 3 4 | Telephone Number |
75521********
|
||||
1 2 3 4 | Fax Number |
75526********
|
||||
1 2 3 4 |
c******@tp-link.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 4 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 4 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 4 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 4 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 3 4 | NII - Unlicensed National Information Infrastructure TX | |||||
1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | AC5400 Wirelesss Tri-Band MU-MIMO Gigabit Router | ||||
1 2 3 4 | AC5400 Wireless Tri-Band MU-MIMO Gigabit Router | |||||
1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 4 | Modular Equipment Type | Does not apply | ||||
1 2 3 4 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
1 2 3 4 | Original Equipment | |||||
1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 4 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 4 | Grant Comments | Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 31 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 and 40 MHz bandwidth modes. | ||||
1 2 3 4 | Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 31 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes. | |||||
1 2 3 4 | Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 and 40 MHz bandwidth modes. | |||||
1 2 3 4 | Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes. | |||||
1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 4 | Firm Name |
SPORTON International Inc.
|
||||
1 2 3 4 |
Sporton International Inc.
|
|||||
1 2 3 4 | Name |
S****** J********
|
||||
1 2 3 4 |
A****** C******
|
|||||
1 2 3 4 | Telephone Number |
886-3******** Extension:
|
||||
1 2 3 4 |
886-3******** Extension:
|
|||||
1 2 3 4 | Fax Number |
886-3********
|
||||
1 2 3 4 |
886-3********
|
|||||
1 2 3 4 |
s******@sporton.com.tw
|
|||||
1 2 3 4 |
a******@sporton.com.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC MO | 2412.00000000 | 2462.00000000 | 0.9930000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.986 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15E | 38 CC MO | 5745 | 5825 | 0.982 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC MO | 2412 | 2462 | 0.993 | |||||||||||||||||||||||||||||||||||
3 | 2 | 15C | CC MO | 5745 | 5825 | 0.995 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15E | 39 CC MO | 5180.00000000 | 5240.00000000 | 0.9860000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC