Managed WiFi Power Plug with Switchable Relay Model: USP-Plug Package Contents USP-Plug System Requirements UniFi Network Controller software v5.13.5 or newer, available at: ui.com/download/unifi
(1) UniFi Access Point or Dream Machine for the USP-Plug iOS or Android Mobile Device with UniFi Network App to connect to Installed Hardware Overview LED 1 LED State Description Slowly Flashing Ready for setup, waiting to be paired Double Pulse Flashing Connecting to router Steady Blue (Always On) Powered on, connected to Wi-Fi Off Powered off, not plugged in Button 2 Function Power Factory Reset Description Press and release the Button to toggle power on or off Press and hold the Button for five seconds or until the LED starts flashing Before You Begin Hardware Installation 1. 2. 3. Wait for the LED on the Button to start flashing blue, and then launch the UniFi Network app. 4. Follow the on-screen instructions. Supported Voltage Range 100 - 240VAC, 50/60 Hz, Max. 10A Specifications Dimensions Weight Power Method Power Supply Max. Power Consumption Networking Interface Button Operating Frequency Max. TX Power Wi-Fi Standards Wireless Security Operating Temperature Operating Humidity Certifications USP-Plug 50 x48 mm (1.97 x 1.89") 47 g (1.66 oz) 1100W for 110VAC AC Input AC/DC Embedded 802.11 b/g/n Wi-Fi Power/Reset with Integrated LED 2.4 GHz 16.9 dBm (0.05W) 802.11 b/g/n WPA2-PSK AES/TKIP
-10 to 40 C (14 to 104 F) 10 to 90% Noncondensing FCC, IC Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in a location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Electrical Safety Information 1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturers label. Connection to a different power source than those specified may result in improper operation, damage to the equipment or pose a fire hazard if the limitations are not followed. 2. There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service technician. The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where applicable, specify arbitration instead of jury trials or class actions. Limited Warranty ui.com/support/warranty/
Compliance FCC Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This radio transmitter (FCC ID: SWX-USP1) has been approved by FCC. ISED Canada CAN ICES-3(B)/NMB-3(B) This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. This radio transmitter (IC: 6545A-USP1) has been approved by ISED Canada. CAN ICES-3(B)/NMB-3(B) Le prsent appareil est conforme aux CNR dISDE Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
lappareil ne doit pas produire de brouillage;
lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Le prsent metteur radio (IC : 6545A-USP1) a t approuv par ISDE Canada. 1. 2. IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. AVIS IMPORTANT :
Dclaration sur lexposition aux rayonnements :
Cet quipement est conforme aux limites prvues pour lexposition aux rayonnements dans un environnement non contrl. Lors de linstallation et de la mise en fonctionnement de lquipement, assurez-vous quil y ait une distance minimale de 20 cm entre llment rayonnant et vous. Cet metteur ne doit tre install proximit daucune autre antenne ni daucun autre metteur, et ne doit tre utilis conjointement aucun autre de ces appareils. Online Resources Support help.ui.com Community community.ui.com Downloads downloads.ui.com Ubiquiti Inc. 685 Third Avenue, 27th Floor New York, NY 10017 USA 2019 Ubiquiti Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, and UniFi are trademarks or registered trademarks of Ubiquiti Inc. in the United States and in other countries. Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. Android, Google, Google Play, the Google Play logo and other marks are trademarks of Google LLC. All other trademarks are the property of their respective owners. JL110119