all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 1.17 MiB | / January 08 2013 | |||
1 |
|
Internal Photos | Internal Photos | 464.72 KiB | / January 08 2013 | |||
1 |
|
External Photos | External Photos | 784.93 KiB | / January 08 2013 | |||
1 |
|
Label and Location | ID Label/Location Info | 165.39 KiB | June 24 2013 | |||
1 |
|
Attestation (Channel and Mode Declaration) | Attestation Statements | 618.43 KiB | June 24 2013 | |||
1 | Block Diagram | Block Diagram | June 24 2013 | confidential | ||||
1 |
|
Confidentiality Request (Shortterm) | Cover Letter(s) | 598.82 KiB | June 24 2013 | |||
1 |
|
Confidentiality Request | Cover Letter(s) | 702.78 KiB | June 24 2013 | |||
1 |
|
Cover Letter (Agent Authorization) | Cover Letter(s) | 1.25 MiB | June 24 2013 | |||
1 |
|
Cover Letter (Modular Approval Request) | Cover Letter(s) | 18.41 KiB | June 24 2013 | |||
1 |
|
Operational Description | Operational Description | 39.06 KiB | June 24 2013 | |||
1 |
|
RF Exposure Info (MPE) | RF Exposure Info | 60.58 KiB | June 24 2013 | |||
1 | Schematics | Schematics | June 24 2013 | confidential | ||||
1 |
|
Test Report | Test Report | 481.17 KiB | June 24 2013 | |||
1 |
|
Test Setup Photos | Test Setup Photos | 421.12 KiB | / January 08 2013 |
1 | User Manual | Users Manual | 1.17 MiB | / January 08 2013 |
Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration d'exposition aux radiations:
Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This device is intended only for OEM integrators under the following conditions:
(For module device use) 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Cet appareil est conu uniquement pour les intgrateurs OEM dans les conditions suivantes: (Pour utilisation de dispositif module) 1) L'antenne doit tre installe de telle sorte qu'une distance de 20 cm est respecte entre l'antenne et les utilisateurs, et 2) Le module metteur peut ne pas tre complant avec un autre metteur ou antenne. Tant que les 2 conditions ci-dessus sont remplies, des essais supplmentaires sur l'metteur ne seront pas ncessaires. Toutefois, l'intgrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformit supplmentaires requis pour ce module install. IMPORTANT NOTE:
In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product(including the transmitter) and obtaining a separate Canada authorization. NOTE IMPORTANTE:
Dans le cas o ces conditions ne peuvent tre satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre metteur), l'autorisation du Canada n'est plus considr comme valide et l'ID IC ne peut pas tre utilis sur le produit final. Dans ces circonstances, l'intgrateur OEM sera charg de rvaluer le produit final (y compris l'metteur) et l'obtention d'une autorisation distinct au Canada. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains IC:
10293A-WMNBM11. Plaque signaltique du produit final Ce module metteur est autoris uniquement pour une utilisation dans un dispositif o l'antenne peut tre installe de telle sorte qu'une distance de 20cm peut tre maintenue entre l'antenne et les utilisateurs. Le produit final doit tre tiquet dans un endroit visible avec l'inscription suivante: "Contient des IC: 10293A-WMNBM11". Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Manuel d'information l'utilisateur final L'intgrateur OEM doit tre conscient de ne pas fournir des informations l'utilisateur final quant la faon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intgre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations rglementaires requises et avertissements comme indiqu dans ce manuel. Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for reevaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains FCC ID: COFWMNBM11. The grantee's FCC ID can be used only when all FCC compliance requirements are met. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Europe EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC:
EN 60950-1: 2006+A11:2009+A1:2010+A12:2011 EN 62311:2008 EN300 328 V 1.8.1:2012 EN 301 489-1 V1.9.2:2011 EN 301 489-17 V 2.2.1 :2012 National Authorities were informed according to Article 6.4 of Frequency Notification. Special Requirements are considered. The product is labeled with CE Marking. esky
[Czech]
Dansk
[Danish]
Deutsch
[German]
Eesti
[Estonian]
English Espaol
[Spanish]
[Greek]
Franais
[French]
Italiano
[Italian]
Latviski
[Latvian]
Lietuvi
[Lithuanian]
[Jmno vrobce] tmto prohlauje, e tento [typ zazen] je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 1999/5/ES. Undertegnede [fabrikantens navn] erklrer herved, at flgende udstyr
[udstyrets typebetegnelse] overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF. Hiermit erklrt [Name des Herstellers], dass sich das Gert [Gertetyp] in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EG befindet. Kesolevaga kinnitab [tootja nimi = name of manufacturer] seadme [seadme tp = type of equipment] vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. Hereby, [name of manufacturer], declares that this [type of equipment] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Por medio de la presente [nombre del fabricante] declara que el [clase de equipo] cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
[name of manufacturer] [type of equipment]
1999/5/. Par la prsente [nom du fabricant] dclare que l'appareil [type d'appareil] est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Con la presente [nome del costruttore] dichiara che questo [tipo di apparecchio] conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Ar o [name of manufacturer / izgatavotja nosaukums] deklar, ka [type of equipment / iekrtas tips] atbilst Direktvas 1999/5/EK btiskajm prasbm un citiem ar to saisttajiem noteikumiem. iuo [manufacturer name] deklaruoja, kad is [equipment type] atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Hierbij verklaart [naam van de fabrikant] dat het toestel [type van toestel] in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Hawnhekk, [isem tal-manifattur], jiddikjara li dan [il-mudel tal-prodott]
jikkonforma mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Alulrott, [gyrt neve] nyilatkozom, hogy a [... tpus] megfelel a vonatkoz alapvet kvetelmnyeknek s az 1999/5/EC irnyelv egyb elrsainak. Niniejszym [nazwa producenta] owiadcza, e [nazwa wyrobu] jest zgodny z zasadniczymi wymogami oraz pozostaymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
[Nome do fabricante] declara que este [tipo de equipamento] est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/CE.
[Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloili direktive 1999/5/ES.
[Meno vrobcu] tmto vyhlasuje, e [typ zariadenia] spa zkladn poiadavky a vetky prslun ustanovenia Smernice 1999/5/ES.
[Valmistaja = manufacturer] vakuuttaa tten ett [type of equipment = laitteen tyyppimerkint] tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Hrmed intygar [fretag] att denna [utrustningstyp] str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG. Nederlands
[Dutch]
Malti
[Maltese]
Magyar
[Hungarian]
Polski
[Polish]
Portugus
[Portuguese
]
Slovensko
[Slovenian]
Slovensky
[Slovak]
Suomi
[Finnish]
Svenska
[Swedish]
1 | Internal Photos | Internal Photos | 464.72 KiB | / January 08 2013 |
CONSTRUCTION PHOTOS OF EUT Model No.: WM-N-BM-11 Model No.: WM-N-BM-14 Report No.: 130520E14 Page 1 Model No.: WM-N-BM-14A Report No.: 130520E14 Page 2
1 | External Photos | External Photos | 784.93 KiB | / January 08 2013 |
CONSTRUCTION PHOTOS OF EUT Model No.: WM-N-BM-11 Report No.: 130520E14 Page 1 Model No.: WM-N-BM-14 Report No.: 130520E14 Page 2 Model No.: WM-N-BM-14A Report No.: 130520E14 Page 3
1 | Label and Location | ID Label/Location Info | 165.39 KiB | June 24 2013 |
WM-N-BM-11 802.11bgn Wireless LAN Module FCC ID: COFWMNBM11
1 | Attestation (Channel and Mode Declaration) | Attestation Statements | 618.43 KiB | June 24 2013 |
i 141Lane 351Sec.1 Taiping RoadTsaotuenNantouTajwa.n Tel:+886-49-235-0876 http://www.usi.com.tw Date: 2013/6/7 GENERAL DECLARATION We UNIVERSAL GLOBAL SCIENTIFIC INDUSTRIAL CO. LTD. declare that the device does not suppo any non-US channels in all the operational mode(s) for the following produc t. FCC 10: COFWMNBM If you have any questions regarding the authorization please don't hesitate to contact us Thank you!
Signature
'((qJA [~
Martin Shih Title: Assocate Manager UNIVERSAL GLOBAL SCIENTIFIC INDUSTRIAL CO.. LTD. TE L:886-49-2350876 #26129 FAX: 886-49-2352061 E-mail: martins@ms.us i.com.tw
1 | Confidentiality Request (Shortterm) | Cover Letter(s) | 598.82 KiB | June 24 2013 |
Federal Communications Commission Authorization and Evaluation Division Confidentialitv Request
[IJj'
141 Lane 351 Sec.1 Taiping Road Tsaoluen Nanlou Taiwan Tel:+886-49-235-0876 http:/ /vNW.usLcom.tw Date: June 142013 FCC 10: COFWMNBM Pursuant to DA 04-1705 of the Commission's Ruleswe request shterm confidential treatment for the following information until Augus t.012013 of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device:
External Photos Test Setup Photos User's Manual Internal Phot Thank you!
Sincerely yours
-
Martin Shih Title: Associate Manager UNIVERSAL GLOBAL SCIENTIFIC INDUSTRIAL CO. LTD. TEL: 886-49-2350876 #26129 FAX: 886-49-2352061 E-mail: martins@ms.usi.com.tw
1 | Confidentiality Request | Cover Letter(s) | 702.78 KiB | June 24 2013 |
1USie!
UniversalGlobalScientificIndustrialCo.Ltd. 141Lane 351Sec.1 Taiping RoadTsaotuenNantouTaiwan Tel:+886-49-235-0876 http://www.usi.com.tw Date:2013/6/7 FCC ID: COFWMNBM Federal Communications Commission Authorization and Evaluation Division Confidentialitv Reauest to Sections 0.457 and 0.459 of the Commission's Rules the Applicant hereby treatment of information accompanying this Application as outlined Pursuant requests confidential below:
Schematics Block Diagram The above materials contain trade secrets and proprieta information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors The Applicant understands that pursuant all accompanying documentation will not be made before the date of the Grant for this application. to Rule 0.457 disclosure of this Application and Sincerely yours A~ ~;h Martin Shih Title: Associate Manager UNIVERSAL GLOBAL SCIENTIFIC INDUSTRIAL CO. LTD. TE L:886-49-2350876 #26129 FAX: 886-49-2352061 E-mail: martins@ms.us i.com.tw
1 | Cover Letter (Agent Authorization) | Cover Letter(s) | 1.25 MiB | June 24 2013 |
.rom tf iI t]r:lm'l1-1a mnUA1mI'mamltr:!I!i!!
R::!:I
~Unlversal GlobalScientificIndustrialCo..ltd. 141Lane 351Sec.1 Taiping RoadTsaotuNantouTaiwan Tel:+886-49-235 876 http://www.usLcom.tw AGENCY AUTHORIZATION LETTER Date: 2013/6/7 To whom it may concern:
We the undersigned UNIVERSAL GLOBAL SCIENTIFIC INDUSTRIAL CO. LTD. hereby authorize Bureau Veritas Consumer Products Services (H.K) Ltd. Taoyuan Branch. of Taiwan to act on our behalf in all matters relating to all processes required in the FCC Part 15C approval and any communication needed with the national authority. Any and all acts carried out by Bureau Veritas Consumer Products Services (H.K) Ltd. Taoyuan Branch. on our behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization please don't hesitate to contact us. Thank you!
Sincerely yours Signature A(~{jl U;\ ~
I\~
Martin Shih Title: Associate Manager UNIVERSAL GLOBAL SCIENTIFIC INDUSTRIAL CO. LTD. TE L:886-49-2350876 #26129 FAX: 886-49-2352061 E-mail: martins@ms.us i.com.tw
1 | Cover Letter (Modular Approval Request) | Cover Letter(s) | 18.41 KiB | June 24 2013 |
FCC ID: COFWMNBM11 Modular Approval Request Letter Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch June 19, 2013 Dear Application Examiner, UNIVERSAL GLOBAL SCIENTIFIC INDUSTRIAL CO., LTD., Its a 802.11bgn Wireless LAN module, FCC ID: COFWMNBM11 would like to have your authorization as a modular approval specific to the mobile RF exposure condition. The requirements of section 15.212 of FCC rules have been met and shown on the following statements. 1. The modular transmitter must have its own RF shielding. The radio portion of this module has been shielded, please see exhibition External Photo. 2. The modular transmitter must have buffered modulation/data inputs. The EUT has buffered data inputs, it is integrated in chip BCM43362KUBG. 3. The modular transmitterS must have its own power supply regulation. The part number of this regulator is STM32F205-G. 4. The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C). The EUT meets the FCC antenna requirements. The spurious emission, unique antenna connector and photo of antennas are shown in the test report. 5. The modular transmitter must be tested in a stand-alone configuration The EUT was tested in a stand-alone configuration via a extender. Please see section Photographs of Test Configuration in the test report, the EUT was plugged in this extender. 6. The modular transmitter must be labeled with its own FCC ID number. Please see exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users Manual, there are instructions give to the OEM on how to label the end product. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. 8. The modular transmitter must comply with any applicable RF exposure requirements. The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. Please contact me if you have any further questions. Thanks for your attention. Best Regards, signature Hank Chung / Assistant Manager Bureau Veritas Consumer Products Services (H.K.) Ltd., Hsinchu Branch Report No.: RF130520E14
1 | Operational Description | Operational Description | 39.06 KiB | June 24 2013 |
FCC ID: COFWMNBM11 Operational Description This device is a 802.11bgn Wireless LAN Module, which operates in 2.4GHz bands; the maximum data rate could be up to 72.2Mbps which OFDM technique. If the signal to noise radio is too poor which could not support 72.2Mbps, the 11Mbps data rate with DSSS technique will be applied. The transmitter of the EUT is powered by DC 3.3V 10% from host equipment. The antenna is Printed antenna without antenna connector. The other instruction, please have a look at the users manual. Report No.: RF RF130520E14
1 | RF Exposure Info (MPE) | RF Exposure Info | 60.58 KiB | June 24 2013 |
`
RF EXPOSURE REPORT REPORT NO.: SA130520E14 MODEL NO.: WM-N-BM-11, WM-N-BM-14, WM-N-BM-14A FCC ID: COFWMNBM11 RECEIVED: May 20, 2013 TESTED: June 05, 2013 ISSUED: June 19, 2013 APPLICANT: UNIVERSAL GLOBAL SCIENTIFIC ADDRESS: 141, Lane 351, Sec. 1, Taiping Road., INDUSTRIAL CO., LTD. Tsaotuen, Nantou 54261, Taiwan ISSUED BY: Bureau Veritas Consumer Products Services
(H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification 1 of 6 Report Format Version 5.0.0 Report No.: SA130520E14 TABLE OF CONTENTS RELEASE CONTROL RECORD .................................................................................... 3 1. CERTIFICATION ...................................................................................................... 4 2. RF EXPOSURE LIMIT .............................................................................................. 5 3. MPE CALCULATION FORMULA ............................................................................. 5 4. CLASSIFICATION .................................................................................................... 5 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER ........................... 6 Report No.: SA130520E14 2 of 6 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. SA130520E14 REASON FOR CHANGE Original release DATE ISSUED June 19, 2013 Report No.: SA130520E14 3 of 6 Report Format Version 5.0.0 1. CERTIFICATION PRODUCT: 802.11bgn Wireless LAN Module BRAND NAME: USI MODEL NO.: WM-N-BM-11, WM-N-BM-14, WM-N-BM-14A TEST SAMPLE: ENGINEERING SAMPLE APPLICANT: UNIVERSAL GLOBAL SCIENTIFIC INDUSTRIAL CO., LTD. TESTED DATE:
June 05, 2013 STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 Bureau Veritas The above equipment (Model: WM-N-BM-11) has been tested by Consumer Products Services (H.K.) Ltd., Taoyuan Branch , and found compliance with the requirement of the above standards. The test record, data evaluation &
Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample conditions specified in this report. s EMC characteristics under the PREPARED BY APPROVED BY
:
:
( Phoenix Huang, Specialist )
( May Chen, Manager )
, DATE: June 19, 2013
, DATE: June 19, 2013 Report No.: SA130520E14 4 of 6 Report Format Version 5.0.0 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY
(mW/cm2) AVERAGE TIME
(minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 1500-100,000 F = Frequency in MHz F/1500 1.0 30 30 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA130520E14 5 of 6 Report Format Version 5.0.0 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY
(MHz) MAX POWER
(mW) ANTENNA GAIN
(dBi) DISTANCE
(cm) 2412 ~ 2462 237.137 2 20 POWER DENSITY
(mW/ cm2) 0.07477 LIMIT
(mW/cm2) 1
--- END ---
CONCLUSION:
Both of the 2.4GHz and 5GHz WLAN can transmit simultaneously, the formula of calculated the MPE is:
CPD1 / LPD1 + CPD2 / LPD2 + etc. < 1 CPD = Calculation power density LPD = Limit of power density Therefore, the worst-case situation is 0.12256 / 1 + 0.42671 / 1 = 0.549, which is less than 1. This confirmed that the device comply with FCC 1.1310 MPE limit. Report No.: SA130520E14 6 of 6 Report Format Version 5.0.0
1 | Test Report | Test Report | 481.17 KiB | June 24 2013 |
FCC TEST REPORT REPORT NO.: RF130520E14 MODEL NO.: WM-N-BM-11, WM-N-BM-14, WM-N-BM-14A FCC ID: COFWMNBM11 RECEIVED: May 20, 2013 TESTED: May 31 to June 06, 2013 ISSUED: June 19, 2013 APPLICANT: UNIVERSAL GLOBAL SCIENTIFIC INDUSTRIAL CO., LTD. ADDRESS: 141, Lane 351, Sec. 1, Taiping Road., Tsaotuen, Nantou 54261, Taiwan ISSUED BY: Bureau Veritas Consumer Products Services
(H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 1 of 64 Report Format Version 5.1.0 Table of Contents UNWANTED EMISSION MEASUREMENT .......................................................... 22 RELEASE CONTROL RECORD ........................................................................................ 4 CERTIFICATION .................................................................................................... 5 1. 2. SUMMARY OF TEST RESULTS ............................................................................ 6 2.1 MEASUREMENT UNCERTAINTY .......................................................................... 7 GENERAL INFORMATION ..................................................................................... 8 3. GENERAL DESCRIPTION OF EUT ....................................................................... 8 3.1 3.2 DESCRIPTION OF TEST MODES ....................................................................... 10 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ........................ 11 GENERAL DESCRIPTION OF APPLIED STANDARDS ....................................... 14 3.3 DESCRIPTION OF SUPPORT UNITS .................................................................. 15 3.4 CONFIGURATION OF SYSTEM UNDER TEST ................................................... 16 3.5 4. TEST TYPES AND RESULTS .............................................................................. 17 4.1 CONDUCTED EMISSION MEASUREMENT ........................................................ 17 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ...................................... 17 4.1.2 TEST INSTRUMENTS .......................................................................................... 17 4.1.3 TEST PROCEDURES .......................................................................................... 18 4.1.4 DEVIATION FROM TEST STANDARD ................................................................. 18 4.1.5 TEST SETUP ....................................................................................................... 18 4.1.6 EUT OPERATING CONDITIONS ......................................................................... 19 4.1.7 TEST RESULTS ................................................................................................... 20 4.2 4.2.1 LIMITS OF UNWANTED EMISSION MEASUREMENT ........................................ 22 4.2.2 TEST INSTRUMENTS .......................................................................................... 23 4.2.3 TEST PROCEDURES .......................................................................................... 24 4.2.4 DEVIATION FROM TEST STANDARD ................................................................. 25 4.2.5 TEST SETUP ....................................................................................................... 26 4.2.6 EUT OPERATING CONDITIONS ......................................................................... 26 4.2.7 TEST RESULTS (RADIATED TEST) .................................................................... 27 4.2.8 TEST RESULTS (CONDUCTED TEST) ............................................................... 38 4.3 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT .................................................. 48 4.3.2 TEST INSTRUMENTS .......................................................................................... 48 4.3.3 TEST PROCEDURE ............................................................................................. 48 4.3.4 DEVIATION FROM TEST STANDARD ................................................................. 48 4.3.5 TEST SETUP ....................................................................................................... 48 4.3.6 EUT OPERATING CONDITIONS ......................................................................... 48 4.3.7 TEST RESULTS ................................................................................................... 49 4.4 CONDUCTED OUTPUT POWER MEASUREMENT ............................................ 50 4.4.1 LIMITS OF MAXIMUM PEAK OUTPUT POWER MEASUREMENT ..................... 50 4.4.2 INSTRUMENTS .................................................................................................... 50 4.4.3 TEST PROCEDURES .......................................................................................... 50 4.4.4 DEVIATION FROM TEST STANDARD ................................................................. 50 4.4.5 TEST SETUP ....................................................................................................... 50 4.4.6 EUT OPERATING CONDITIONS ......................................................................... 51 4.4.7 TEST RESULTS ................................................................................................... 52 4.5 4.5.1 FOR REFERENCE. ............................................................................................. 53 4.5.2 TEST INSTRUMENTS .......................................................................................... 53 4.5.3 TEST PROCEDURES .......................................................................................... 53 4.5.4 TEST SETUP ....................................................................................................... 53 6dB BANDWIDTH MEASUREMENT .................................................................... 48 AVERAGE OUTPUT POWER ............................................................................... 53 Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 2 of 64 Report Format Version 5.1.0 CONDUCTED OUT-BAND EMISSION MEASUREMENT ..................................... 57 POWER SPECTRAL DENSITY MEASUREMENT ................................................ 55 4.5.5 EUT OPERATING CONDITIONS ......................................................................... 53 4.5.6 TEST RESULTS ................................................................................................... 54 4.6 4.6.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT ............................. 55 4.6.2 TEST INSTRUMENTS .......................................................................................... 55 4.6.3 TEST PROCEDURE ............................................................................................. 55 4.6.4 DEVIATION FROM TEST STANDARD ................................................................. 55 4.6.5 TEST SETUP ....................................................................................................... 55 4.6.6 EUT OPERATING CONDITION ............................................................................ 55 4.6.7 TEST RESULTS ................................................................................................... 56 4.7 4.7.1 LIMITS OF CONDUCTED OUT-BAND EMISSION MEASUREMENT................... 57 4.7.2 TEST INSTRUMENTS .......................................................................................... 57 4.7.3 TEST PROCEDURE ............................................................................................. 57 4.7.4 DEVIATION FROM TEST STANDARD ................................................................. 58 4.7.5 TEST SETUP ....................................................................................................... 58 4.7.6 EUT OPERATING CONDITION ............................................................................ 58 4.7.7 TEST RESULTS ................................................................................................... 58 5. 6. 7. PHOTOGRAPHS OF THE TEST CONFIGURATION ............................................ 62 INFORMATION ON THE TESTING LABORATORIES .......................................... 63 APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB ......................................................................................... 64 Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 3 of 64 Report Format Version 5.1.0 RELEASE CONTROL RECORD ISSUE NO. RF130520E14 REASON FOR CHANGE Original release DATE ISSUED June 19, 2013 Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 4 of 64 Report Format Version 5.1.0 1. CERTIFICATION PRODUCT: 802.11bgn Wireless LAN Module BRAND NAME: USI MODEL NO.: WM-N-BM-11, WM-N-BM-14, WM-N-BM-14A TEST SAMPLE: ENGINEERING SAMPLE APPLICANT: UNIVERSAL GLOBAL SCIENTIFIC INDUSTRIAL CO., LTD. TESTED: May 31 to June 06, 2013 STANDARDS: FCC Part 15, Subpart C (Section 15.247) ANSI C63.10-2009 The above equipment (Model: WM-N-BM-11) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample s EMC characteristics under the conditions specified in this report.
, and found PREPARED BY APPROVED BY
:
:
( Phoenix Huang, Specialist )
( May Chen, Manager )
, DATE: June 19, 2013
, DATE:
June 19, 2013 Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 5 of 64 Report Format Version 5.1.0 2. SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications:
For 2.4GHz, 2400~2483.5MHz Band APPLIED STANDARD: FCC PART 15, SUBPART C (SECTION 15.247) STANDARD SECTION TEST TYPE RESULT REMARK 15.207 AC Power Conducted Emission PASS Radiated Emissions Band Edge Measurement 15.247(d) 15.209 15.247(d) 15.247(a)(2) 6dB bandwidth 15.247(b) 15.247(e) 15.203 Conducted Output power Power Spectral Density Antenna Requirement PASS PASS PASS PASS PASS PASS Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 6 of 64 Meet the requirement of limit. Minimum passing margin is
-7.37dB at 14.62500MHz Meet the requirement of limit. Minimum passing margin is
-5.5dB at 72.00MHz Meet the requirement of limit. Meet the requirement of limit. Meet the requirement of limit. Meet the requirement of limit. No antenna connector is used. Report Format Version 5.1.0 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2:
This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Measurement Conducted emissions Radiated emissions (30MHz-1GHz) Radiated emissions (1GHz -6GHz) Radiated emissions (6GHz -18GHz) Radiated emissions (18GHz -40GHz) Value 2.98 dB 5.46 dB 3.54 dB 4.08 dB 4.11 dB Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 7 of 64 Report Format Version 5.1.0 3. GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT PRODUCT MODEL NO. POWER SUPPLY MODULATION TYPE MODULATION TECHNOLOGY TRANSFER RATE 802.11bgn Wireless LAN Module WM-N-BM-11, WM-N-BM-14, WM-N-BM-14A DC 3.3V 10% from host equipment CCK, DQPSK, DBPSK for DSSS 64QAM, 16QAM, QPSK, BPSK for OFDM DSSS,OFDM 802.11b: up to 11Mbps 802.11g: up to 54Mbps 802.11n: up to 72.2Mbps OPERATING FREQUENCY NUMBER OF CHANNEL 11 for 802.11b, 802.11g, 802.11n (HT20) 2.412 ~ 2.462GHz 802.11b: 92.47mW 802.11g: 233.346mW 802.11n (HT20): 237.137mW Please see NOTE NA Refer to users manual MAXIMUM OUTPUT POWER ANTENNA TYPE DATA CABLE I/O PORTS ASSOCIATED DEVICES NA NOTE:
1. The EUT has below model names, which are identical to each other in all aspects except for the following table:
Brand USI Model No. WM-N-BM-11 WM-N-BM-14 WM-N-BM-14A Difference With MFI AUTH IC Without MFI AUTH IC Without MFI AUTH IC and with Ayla logo For the final test, model: WM-N-BM-11 was selected as the representative model for the test and its data is recorded in this report. Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 8 of 64 Report Format Version 5.1.0 2. The antennas provided to the EUT, please refer to the following table:
Brand Model Antenna Type Antenna Gain
(dBi) Connector Frequency range
(MHz to MHz) NA WMNBM11-Printed Printed 2 NA 2400 ~ 2484 3. The EUT incorporates a SISO function without beam forming. MODULATION MODE TX/RX FUNCTION 802.11b 802.11g 802.11n (HT20) 1TX/1RX 1TX/1RX 1TX/1RX 4. When the EUT operating in 802.11n, the software operation, which is defined by manufacturer, MCS (Modulation and Coding Schemes) from 0 to 7. 5. The above EUT information was declared by the manufacturer and for more detailed features description, please refer to the manufacturer's specifications or User's Manual. Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 9 of 64 Report Format Version 5.1.0 3.2 DESCRIPTION OF TEST MODES Operated in 2400 ~ 2483.5MHz band:
11 channels are provided for 802.11b, 802.11g, 802.11n (HT20):
CHANNEL FREQUENCY CHANNEL FREQUENCY 1 2 3 4 5 6 2412MHz 2417MHz 2422MHz 2427MHz 2432MHz 2437MHz 7 8 9 10 11 2442MHz 2447MHz 2452MHz 2457MHz 2462MHz 7 channels are provided for 802.11n (HT40):
CHANNEL FREQUENCY CHANNEL FREQUENCY 3 4 5 6 2422MHz 2427MHz 2432MHz 2437MHz 7 8 9 2442MHz 2447MHz 2452MHz Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 10 of 64 Report Format Version 5.1.0 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL EUT CONFIGURE MODE APPLICABLE TO PLC RE < 1G RE 1G APCM
-
OB DESCRIPTION
-
Where PLC: Power Line Conducted Emission RE 1G: Radiated Emission above 1GHz OB: Conducted Out-Band Emission Measurement RE < 1G: Radiated Emission below 1GHz APCM: Antenna Port Conducted Measurement Note: The EUT had been pre-tested on the positioned of each 2 axis. The worst case was found when positioned on X-plane. POWER LINE CONDUCTED EMISSION TEST:
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. MODE AVAILABLE CHANNEL TESTED CHANNEL MODULATION TECHNOLOGY 802.11n (HT20) 1 to 11 1 OFDM MODULATION DATA RATE COMBINATION TYPE BPSK
(Mbps) 6.5 MODE C RADIATED EMISSION TEST (BELOW 1 GHz):
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. MODE AVAILABLE CHANNEL TESTED CHANNEL MODULATION TECHNOLOGY MODULATIO DATA RATE COMBINATION N TYPE
(Mbps) MODE 802.11n (HT20) 1 to 11 1 OFDM BPSK 6.5 D Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 11 of 64 Report Format Version 5.1.0 RADIATED EMISSION TEST (ABOVE 1 GHz):
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. MODE 802.11b 802.11g 802.11n (HT20) AVAILABLE CHANNEL TESTED CHANNEL MODULATION TECHNOLOGY 1 to 11 1 to 11 1 to 11 1, 6, 11 1, 6, 11 1, 6, 11 DSSS OFDM OFDM MODULATION DATA RATE COMBINATION TYPE DBPSK BPSK BPSK
(Mbps) MODE 1 6 6.5 A B D ANTENNA PORT CONDUCTED MEASUREMENT:
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. MODE 802.11b 802.11g 802.11n (HT20) AVAILABLE CHANNEL TESTED CHANNEL MODULATION TECHNOLOGY MODULATION DATA RATE COMBINATION TYPE
(Mbps) MODE 1 to 11 1 to 11 1 to 11 1, 6, 11 1, 6, 11 1, 6, 11 DSSS OFDM OFDM DBPSK BPSK BPSK 1 6 6.5 A B D CONDUCTED OUT-BAND EMISSION MEASUREMENT:
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. MODE 802.11b 802.11g 802.11n (HT20) AVAILABLE CHANNEL TESTED CHANNEL MODULATION TECHNOLOGY MODULATION DATA RATE COMBINATION TYPE
(Mbps) MODE 1 to 11 1 to 11 1 to 11 1, 6, 11 1, 6, 11 1, 6, 11 DSSS OFDM OFDM DBPSK BPSK BPSK 1 6 6.5 A B D Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 12 of 64 Report Format Version 5.1.0 TEST CONDITION:
APPLICABLE TO ENVIRONMENTAL CONDITIONS PLC RE<1G RE1G APCM OB 25deg. C,65%RH 25deg. C, 68%RH 24deg. C, 67%RH 25deg. C, 60%RH 25deg. C, 60%RH INPUT POWER
(SYSTEM) 120Vac, 60Hz 120Vac, 60Hz 120Vac, 60Hz 120Vac, 60Hz 120Vac, 60Hz TESTED BY Anderson Chen Andy Ho Tim Ho James Chen James Chen Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 13 of 64 Report Format Version 5.1.0 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS The EUT is a RF product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards:
FCC Part 15, Subpart C. (15.247) 558074 D01 DTS Meas Guidance v03r01 ANSI C63.10-2009 All test items have been performed and recorded as per the above standards. Note: The EUT has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B (DoC). The test report has been issued separately. Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 14 of 64 Report Format Version 5.1.0 3.4 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. NO. PRODUCT BRAND MODEL NO. SERIAL NO. FCC ID 1 NOTEBOOK COMPUTER 2 TEST TOOL 3 50ohm terminal resistor DELL PP32LA FSLB32S FCC DoC USI NA NA NA NA NA NA NA SIGNAL CABLE DESCRIPTION OF THE ABOVE SUPPORT UNITS NO. 1 Mini USB to USB Cable, 1m 2 NA 3 NA NOTE: All power cords of the above support units are non shielded (1.8m). Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 15 of 64 Report Format Version 5.1.0 3.5 CONFIGURATION OF SYSTEM UNDER TEST EUT 2. TEST TOOL 1. NOTEBOOK COMPUTER
(Power from host equipment) Test table For other test items:
For Radiated Emission test: (above 1GHz Tx mode radiated test) Note: Support unit 3 is 50ohm terminal resistor. NOTE: 1. The test configuration was defined by the applicants requirement. Test table 1. NOTEBOOK COMPUTER
(Power from host equipment) 2. TEST TOOL EUT 3 Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 16 of 64 Report Format Version 5.1.0 4. TEST TYPES AND RESULTS 4.1 CONDUCTED EMISSION MEASUREMENT 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT FREQUENCY OF EMISSION (MHz) 0.15-0.5 0.5-5 5-30 Quasi-peak CONDUCTED LIMIT (dBV) Average 56 to 46 66 to 56 56 60 46 50 NOTE:
1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50 MHz. 4.1.2 TEST INSTRUMENTS ESCS 30 NSLK8127 MODEL NO. DESCRIPTION &
MANUFACTURER Test Receiver Line-Impedance Stabilization Network
(for EUT) SCHWARZBECK Line-Impedance Stabilization Network
(for Peripheral) RF Cable
(JYEBAO) 50 ohms Terminator 50 BV Software ADT ADT_Cond_V7.3.7.3 Note:
ENV216 5DFB SERIAL NO. 100375 CALIBRATED DATE Mar. 08, 2013 Mar. 07, 2014 CALIBRATED UNTIL 8127-522 Sep. 06, 2012 Sep. 05, 2013 100072 June 08,2012 June 07,2013 COCCAB-001 Mar. 11, 2013 Mar. 10, 2014 EMC-3 NA Sep. 25, 2012 Sep. 24, 2013 NA NA 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Shielded Room No. C. 3 The VCCI Con C Registration No. is C-3611. 4 Tested Date: May 31, 2013 Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 17 of 64 Report Format Version 5.1.0 4.1.3 TEST PROCEDURES a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. b. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. c. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. d. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) were not recorded. NOTE:
1. The resolution bandwidth of test receiver is 9kHz for Quasi-peak detection (QP) & Average detection (AV). 4.1.4 DEVIATION FROM TEST STANDARD No deviation 4.1.5 TEST SETUP Vertical Groun d Referenc e Plan e 40c m EU T LISN 80c m Te st Receiv e r Horizonta l Grou nd Reference Plan e Note: 1.Supp ort u nits were co nne cted to s eco nd LISN . For the actual test configuration, please refer to the related item Photographs of the Test Configuration. Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 18 of 64 Report Format Version 5.1.0 4.1.6 EUT OPERATING CONDITIONS 1. Connect the EUT with the support unit 1 (Notebook Computer) which is placed on a table in control room. 2. The communication partner run test program paste wl command to enable EUT under transmission/receiving condition continuously at specific channel frequency. Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 19 of 64 Report Format Version 5.1.0 4.1.7 TEST RESULTS PHASE No 1 2 3 4 5 6 Freq.
[MHz]
0.15000 0.21641 0.32578 0.43516 0.75938 14.62500 REMARKS:
Line (L) DETECTOR FUNCTION Quasi-Peak (QP) /
Average (AV) Emission Reading Value Limit Level
[dB (uV)]
[dB (uV)]
Corr. Factor
(dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 0.12
-32.98
-13.08 0.14
-17.81 0.17
-16.22 0.18 0.20
-21.99
-7.37 0.86 41.59 22.90 41.71 23.02 66.00 56.00 40.85 39.73 40.99 39.87 62.96 52.96 32.55 31.58 32.72 31.75 59.56 49.56 31.07 30.75 31.25 30.93 57.15 47.15 24.26 23.81 24.46 24.01 56.00 46.00 47.97 41.77 48.83 42.63 60.00 50.00
-24.29
-21.96
-26.84
-25.90
-31.54
-11.17 Margin
(dB)
[dB (uV)]
1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission Level Limit value 4. Correction Factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 20 of 64 Report Format Version 5.1.0 PHASE Neutral (N) DETECTOR FUNCTION Quasi-Peak (QP) /
Average (AV) Emission Reading Value Limit Level
[dB (uV)]
[dB (uV)]
Corr. Factor
(dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV.
-32.03 0.10
-20.41 0.12
-20.45 0.15 0.18
-17.56
-21.96 0.18 0.64
-8.18 42.10 23.87 42.20 23.97 66.00 56.00 40.30 32.42 40.42 32.54 62.96 52.96 29.61 28.96 29.76 29.11 59.56 49.56 29.15 28.26 29.33 28.44 56.00 46.00 23.87 23.86 24.05 24.04 56.00 46.00 47.42 41.18 48.06 41.82 60.00 50.00
-23.80
-22.53
-29.80
-26.67
-31.95
-11.94 Margin
(dB)
[dB (uV)]
No 1 2 3 4 5 6 Freq.
[MHz]
0.15000 0.21641 0.32578 0.54453 0.65000 14.62500 REMARKS:
1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission Level Limit value 4. Correction Factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 21 of 64 Report Format Version 5.1.0 4.2 UNWANTED EMISSION MEASUREMENT 4.2.1 LIMITS OF UNWANTED EMISSION MEASUREMENT Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 20dB below the highest level of the desired power:
Frequencies
(MHz) Field strength
(microvolts/meter) Measurement distance
(meters) 0.009-0.490 0.490-1.705 1.705-30.0 30-88 88-216 216-960 Above 960 2400/F(kHz) 24000/F(kHz) 30 100 150 200 500 300 30 30 3 3 3 3 NOTE:
1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 22 of 64 Report Format Version 5.1.0 4.2.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER Spectrum Analyzer Agilent MXE EMI Receiver Agilent Pre-Amplifier Mini-Circuits Pre-Amplifier Agilent Pre-Amplifier SPACEK LABS Trilog Broadband Antenna SCHWARZBECK Horn_Antenna AISI Horn_Antenna SCHWARZBECK MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL E4446A MY48250253 Sep. 03, 2012 Sep. 02, 2013 N9038A ZFL-1000VH2 B 8449B MY50010156 Jan. 16, 2013 Jan. 15, 2014 AMP-ZFL-04 Nov. 14, 2012 Nov. 13, 2013 3008A01923 Oct. 30, 2012 Oct. 29, 2013 SLKKa-48-6 9K16 Nov. 14, 2012 Nov. 13, 2013 VULB 9168 9168-361 Mar. 25, 2013 Mar. 24, 2014 AIH.8018 0000220091110 Nov. 27, 2012 Nov. 26, 2013 BBHA 9170 RF Cable NA RF Cable Software Antenna Tower & Turn Table CT NA ADT_Radiated _V8.7.07 NA Note:
Oct. 12, 2012 Oct. 11, 2013 9170-424 RF104-205 RF104-207 RF104-202 CHHCAB_001 Oct. 07, 2012 Oct. 06, 2013 NA Dec. 26, 2012 Dec. 25, 2013 NA NA NA NA NA 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna, preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3 The test was performed in 966 Chamber No. H. 4. The FCC Site Registration No. is 797305. 5 The CANADA Site Registration No. is IC 7450H-3. 6 Tested Date: June 03 to 06, 2013 Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 23 of 64 Report Format Version 5.1.0 4.2.3 TEST PROCEDURES For Below 1GHz test:
a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at an accredited test facility. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna is a broadband antenna, and its height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. NOTE:
1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for quasi-peak detection (QP) at frequency below 1GHz. For Above 1GHz test:
Following FCC KDB 558074 D01 DTS Meas. Guidance:
Radiated versus Conducted Measurements. The unwanted emission limits in both the restricted and non-restricted bands are based on antenna-port conducted measurements in conjunction with cabinet emissions tests are permitted to demonstrate compliance. The following steps was performed:
a. Cabinet emissions measurements. Radiated measurement was performed to ensure that cabinet emissions are below the emission limits. For the cabinet-emission measurements the antenna was replaced by a termination matching the nominal impedance of the antenna. b. Conducted tests was performed using equipment that matches the nominal impedance of the antenna assembly used with the EUT c. EIRP calculation. A value representative of an upper bound on out-of-band antenna gain (in dBi) shall be added to the measured antenna-port conducted emission power to compute EIRP within the specified measurement bandwidth. (For emissions in the restricted bands, additional calculations are required to convert EIRP to field strength at the specified distance.) The upper bound on antenna gain for a device with a single RF output shall be selected as the maximum in-band gain of the antenna across all operating bands or 2 dBi, whichever is greater d. EIRP adjustments for multiple outputs. (Follow the procedures specified in FCC KDB Publication 662911) Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 24 of 64 Report Format Version 5.1.0 e. For all of Radiation emission test e-1. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meters chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. e-2. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. e-3. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. e-4. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e-5. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. e-6. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. NOTE:
1. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 10 Hz for Average detection (AV) at frequency above 1GHz. 3. All modes of operation were investigated and the worst-case emissions are reported. 4.2.4 DEVIATION FROM TEST STANDARD No deviation Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 25 of 64 Report Format Version 5.1.0 4.2.5 TEST SETUP For radiated test Ant. Tower 1-4m Variable EUT&
Support Units 80cm 3m 10m Turn Table Ground Plane Test Receiver For conducted test For the actual test configuration, please refer to the related item Photographs of the Test Configuration. 10dB ATTENUATION PAD SPECTRUM ANALYZER EUT 4.2.6 EUT OPERATING CONDITIONS Same as 4.1.6 Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 26 of 64 Report Format Version 5.1.0 4.2.7 TEST RESULTS (RADIATED TEST) BELOW 1GHz WORST-CASE DATA 802.11n (HT20) CHANNEL TX Channel 1 FREQUENCY RANGE Below 1GHz DETECTOR FUNCTION Quasi-Peak (QP)
(dB) LIMIT MARGIN
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 217 242 250 344 338 232 40.0 43.5 43.5 46.0 46.0 46.0
-5.5
-8.6
-6.0
-10.5
-8.9
-13.7
(m) 2.00 H 1.50 H 1.50 H 1.00 H 2.00 H 1.50 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION RAW VALUE LEVEL
(dBuV)
(dBuV/m) 50.26 34.5 QP 48.18 34.9 QP 51.35 37.5 QP 49.17 35.5 QP 47.28 37.1 QP 32.3 QP 33.58 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 43.08 51.66 44.04 49.55 44.13 38.81 LEVEL
(dBuV/m) 29.4 QP 34.8 QP 30.9 QP 36.2 QP 34.4 QP 39.4 QP
(m) 1.50 V 1.00 V 1.00 V 1.00 V 2.00 V 1.00 V
-10.6
-8.7
-12.6
-9.8
-11.6
-6.6 40.0 43.5 43.5 46.0 46.0 46.0 198 115 231 123 260 297 TABLE ANGLE
(Degree) ANTENNA HEIGHT
(dBuV/m) MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m)
-15.74
-13.32
-13.89
-13.65
-10.14
-1.27 CORRECTION FACTOR
(dB/m)
-13.65
-16.85
-13.14
-13.34
-9.72 0.62 NO. 1 2 3 4 5 6 FREQ.
(MHz) 72.00 160.95 168.03 265.81 389.53 849.12 NO. FREQ.
(MHz) 1 2 3 4 5 6 49.98 105.51 144.41 271.19 410.58 947.77 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 27 of 64 Report Format Version 5.1.0 ABOVE 1GHz DATA Radiated versus Conducted Measurement Conducted measurement Radiated measurement For Radiated measurement:
The level of unwanted emissions was measured when radiated by the cabinet or structure of the equipment with the antenna connector(s) terminated by a specified load (cabinet radiation) For Conducted measurement:
The level of unwanted emissions was measured as their power in a specified load
(conducted spurious emissions). Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 28 of 64 Report Format Version 5.1.0 802.11b CHANNEL TX Channel 1 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) LIMIT MARGIN 74.0 54.0
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION RAW LEVEL VALUE
(dBuV/m)
(dBuV) 50.5 PK 44.11 41.1 AV 34.71 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 41.11 34.11 LEVEL
(dBuV/m) 47.5 PK 40.5 AV TABLE ANGLE
(Degree)
(m) 1.52 H 1.52 H
(m) 1.25 V 1.25 V ANTENNA HEIGHT
-23.5
-12.9
-26.5
-13.5
(dBuV/m) 74.0 54.0 MARGIN 107 107 136 136 LIMIT
(dB) CORRECTION FACTOR
(dB/m) 6.39 6.39 CORRECTION FACTOR
(dB/m) 6.39 6.39 NO. FREQ.
(MHz) 1 2 4824.00 4824.00 NO. FREQ.
(MHz) 1 2 4824.00 4824.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 29 of 64 Report Format Version 5.1.0 CHANNEL TX Channel 6 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) LIMIT MARGIN
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-24.5
-13.8
-18.9
-9.9 TABLE ANGLE
(Degree)
(m) 1.61 H 1.61 H 1.00 H 1.00 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION VALUE LEVEL
(dBuV)
(dBuV/m) 43.08 49.5 PK 33.78 40.2 AV 44.13 55.1 PK 44.1 AV 33.13 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 40.98 34.18 44.23 33.13 LEVEL
(dBuV/m) 47.4 PK 40.6 AV 55.2 PK 44.1 AV
(m) 1.22 V 1.22 V 1.00 V 1.00 V TABLE ANGLE
(Degree)
-26.6
-13.4
-18.8
-9.9 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 103 103 287 287 123 123 233 233
(dBuV/m) MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m) 6.42 6.42 10.97 10.97 CORRECTION FACTOR
(dB/m) 6.42 6.42 10.97 10.97 NO. 1 2 3 4 FREQ.
(MHz) 4874.00 4874.00 7311.00 7311.00 NO. FREQ.
(MHz) 1 2 3 4 4874.00 4874.00 7311.00 7311.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 30 of 64 Report Format Version 5.1.0 CHANNEL TX Channel 11 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) LIMIT MARGIN
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-24.7
-14.2
-18.8
-9.8 TABLE ANGLE
(Degree)
(m) 1.58 H 1.58 H 1.00 H 1.00 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION VALUE LEVEL
(dBuV)
(dBuV/m) 42.86 49.3 PK 33.36 39.8 AV 44.01 55.2 PK 44.2 AV 33.01 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 40.56 34.06 44.31 33.41 LEVEL
(dBuV/m) 47.0 PK 40.5 AV 55.5 PK 44.6 AV
(m) 1.20 V 1.20 V 1.00 V 1.00 V TABLE ANGLE
(Degree)
-27.0
-13.5
-18.5
-9.4 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 112 112 226 226 87 87 281 281
(dBuV/m) MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m) 6.44 6.44 11.19 11.19 CORRECTION FACTOR
(dB/m) 6.44 6.44 11.19 11.19 NO. 1 2 3 4 FREQ.
(MHz) 4924.00 4924.00 7386.00 7386.00 NO. FREQ.
(MHz) 1 2 3 4 4924.00 4924.00 7386.00 7386.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 31 of 64 Report Format Version 5.1.0 802.11g CHANNEL TX Channel 1 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) LIMIT MARGIN 74.0 54.0
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION RAW LEVEL VALUE
(dBuV/m)
(dBuV) 54.6 PK 48.21 35.7 AV 29.31 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 48.01 29.71 LEVEL
(dBuV/m) 54.4 PK 36.1 AV TABLE ANGLE
(Degree)
(m) 1.19 H 1.19 H
(m) 1.17 V 1.17 V ANTENNA HEIGHT
-19.4
-18.3
-19.6
-17.9
(dBuV/m) 74.0 54.0 MARGIN 199 199 182 182 LIMIT
(dB) CORRECTION FACTOR
(dB/m) 6.39 6.39 CORRECTION FACTOR
(dB/m) 6.39 6.39 NO. FREQ.
(MHz) 1 2 4824.00 4824.00 NO. FREQ.
(MHz) 1 2 4824.00 4824.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 32 of 64 Report Format Version 5.1.0 CHANNEL TX Channel 6 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) LIMIT MARGIN
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-19.1
-17.8
-18.4
-9.6 TABLE ANGLE
(Degree)
(m) 1.22 H 1.22 H 1.04 H 1.04 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION VALUE LEVEL
(dBuV)
(dBuV/m) 48.48 54.9 PK 29.78 36.2 AV 44.63 55.6 PK 44.4 AV 33.43 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 48.38 29.48 44.83 33.33 LEVEL
(dBuV/m) 54.8 PK 35.9 AV 55.8 PK 44.3 AV
(m) 1.17 V 1.17 V 1.10 V 1.10 V TABLE ANGLE
(Degree)
-19.2
-18.1
-18.2
-9.7 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 198 198 266 266 196 196 264 264
(dBuV/m) MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m) 6.42 6.42 10.97 10.97 CORRECTION FACTOR
(dB/m) 6.42 6.42 10.97 10.97 NO. 1 2 3 4 FREQ.
(MHz) 4874.00 4874.00 7311.00 7311.00 NO. FREQ.
(MHz) 1 2 3 4 4874.00 4874.00 7311.00 7311.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 33 of 64 Report Format Version 5.1.0 CHANNEL TX Channel 11 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) LIMIT MARGIN
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-19.3
-18.1
-18.6
-9.8 TABLE ANGLE
(Degree)
(m) 1.19 H 1.19 H 1.07 H 1.07 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION VALUE LEVEL
(dBuV)
(dBuV/m) 48.26 54.7 PK 29.46 35.9 AV 44.21 55.4 PK 44.2 AV 33.01 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 48.06 29.46 44.11 33.11 LEVEL
(dBuV/m) 54.5 PK 35.9 AV 55.3 PK 44.3 AV
(m) 1.17 V 1.17 V 1.01 V 1.01 V TABLE ANGLE
(Degree)
-19.5
-18.1
-18.7
-9.7 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 210 210 271 271 197 197 276 276
(dBuV/m) MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m) 6.44 6.44 11.19 11.19 CORRECTION FACTOR
(dB/m) 6.44 6.44 11.19 11.19 NO. 1 2 3 4 FREQ.
(MHz) 4924.00 4924.00 7386.00 7386.00 NO. FREQ.
(MHz) 1 2 3 4 4924.00 4924.00 7386.00 7386.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 34 of 64 Report Format Version 5.1.0 802.11n (HT20) CHANNEL TX Channel 1 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) LIMIT MARGIN 74.0 54.0
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION RAW LEVEL VALUE
(dBuV/m)
(dBuV) 54.7 PK 48.31 36.0 AV 29.61 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 48.11 29.31 LEVEL
(dBuV/m) 54.5 PK 35.7 AV TABLE ANGLE
(Degree)
(m) 1.14 H 1.14 H
(m) 1.18 V 1.18 V ANTENNA HEIGHT
-19.3
-18.0
-19.5
-18.3
(dBuV/m) 74.0 54.0 MARGIN 182 182 199 199 LIMIT
(dB) CORRECTION FACTOR
(dB/m) 6.39 6.39 CORRECTION FACTOR
(dB/m) 6.39 6.39 NO. FREQ.
(MHz) 1 2 4824.00 4824.00 NO. FREQ.
(MHz) 1 2 4824.00 4824.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 35 of 64 Report Format Version 5.1.0 CHANNEL TX Channel 6 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) LIMIT MARGIN
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-19.3
-18.0
-18.1
-9.4 TABLE ANGLE
(Degree)
(m) 1.21 H 1.21 H 1.06 H 1.06 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION VALUE LEVEL
(dBuV)
(dBuV/m) 48.28 54.7 PK 29.58 36.0 AV 44.93 55.9 PK 44.6 AV 33.63 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 48.58 29.88 44.43 33.03 LEVEL
(dBuV/m) 55.0 PK 36.3 AV 55.4 PK 44.0 AV
(m) 1.20 V 1.20 V 1.00 V 1.00 V TABLE ANGLE
(Degree)
-19.0
-17.7
-18.6
-10.0 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 213 213 279 279 214 214 263 263
(dBuV/m) MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m) 6.42 6.42 10.97 10.97 CORRECTION FACTOR
(dB/m) 6.42 6.42 10.97 10.97 NO. 1 2 3 4 FREQ.
(MHz) 4874.00 4874.00 7311.00 7311.00 NO. FREQ.
(MHz) 1 2 3 4 4874.00 4874.00 7311.00 7311.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 36 of 64 Report Format Version 5.1.0 CHANNEL TX Channel 11 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) LIMIT MARGIN
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-19.9
-18.3
-18.9
-9.8 TABLE ANGLE
(Degree)
(m) 1.27 H 1.27 H 1.01 H 1.01 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION VALUE LEVEL
(dBuV)
(dBuV/m) 47.66 54.1 PK 29.26 35.7 AV 43.91 55.1 PK 44.2 AV 33.01 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 48.06 29.36 44.71 33.31 LEVEL
(dBuV/m) 54.5 PK 35.8 AV 55.9 PK 44.5 AV
(m) 1.16 V 1.16 V 1.09 V 1.09 V TABLE ANGLE
(Degree)
-19.5
-18.2
-18.1
-9.5 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 188 188 256 256 210 210 251 251
(dBuV/m) MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m) 6.44 6.44 11.19 11.19 CORRECTION FACTOR
(dB/m) 6.44 6.44 11.19 11.19 NO. 1 2 3 4 FREQ.
(MHz) 4924.00 4924.00 7386.00 7386.00 NO. FREQ.
(MHz) 1 2 3 4 4924.00 4924.00 7386.00 7386.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 37 of 64 Report Format Version 5.1.0 4.2.8 TEST RESULTS (CONDUCTED TEST) Radiated versus Conducted Measurement Conducted measurement Radiated measurement For Radiated measurement:
The level of unwanted emissions was measured when radiated by the cabinet or structure of the equipment with the antenna connector(s) terminated by a specified load (cabinet radiation) For Conducted measurement:
The level of unwanted emissions was measured as their power in a specified load
(conducted spurious emissions). Conducted Measurement Factor a. b. c. d. The antenna gain will be used. (antenna gain = 2dBi) For the out of band sp urious the gain for the specific band may have been used rather than the highest gain across all bands. For the band edge the gain for the specific band may have been used. In restricted bands below 1000 MHz, add upper bound on ground plane reflection:
For f = 30 1000 MHz, add 4.7 dB. Note: The conducted emission test was considered some factor to compute test result. Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 38 of 64 Report Format Version 5.1.0 ABOVE 1GHz DATA 802.11b CHANNEL TX Channel 1 FREQUENCY RANGE 1GHz ~ 25GHz Conducted spurious emission table DETECTOR FUNCTION Peak (PK) Average (AV) NO. FREQ. (MHz) EMISSION LEVEL (dBm) LIMIT (dBm) MARGIN (dB) 1 2 4825 PK 4821.875 AV
-46.1
-52.69
-21.26
-41.26
-24.84
-11.43 RAW VALUE
(dBm)
-48.1
-54.69 CORRECTION FACTOR (dB) 2 2 REMARKS:
1. Emission level (dBm) = Raw Value (dBuV) + Correction Factor (dB). 2. The other emission levels were very low against the limit. 3. Margin value = Emission level Limit value. Bandedge table NO. FREQ. (MHz) 1 2 3 4 2386 PK 2386 AV 2493.16 PK 2483.66 AV REMARKS:
EMISSION LEVEL (dBm) LIMIT (dBm) MARGIN (dB)
-38.22
-49.12
-46.85
-59.98
-21.26
-41.26
-21.26
-41.26
-16.96
-7.86
-25.59
-18.72 RAW VALUE
(dBm)
-40.22
-51.12
-48.85
-61.98 CORRECTION FACTOR (dB) 2 2 2 2 1. Emission level (dBm) = Raw Value (dBuV) + Correction Factor (dB). 2. The other emission levels were very low against the limit. 3. Margin value = Emission level Limit value. Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 39 of 64 Report Format Version 5.1.0 802.11b CHANNEL TX Channel 6 FREQUENCY RANGE 1GHz ~ 25GHz Conducted spurious emission table DETECTOR FUNCTION Peak (PK) Average (AV) NO. FREQ. (MHz) 1 2 3 4 4875 PK 4875 AV 7312.5 PK 7309.375 AV REMARKS:
EMISSION LEVEL (dBm) LIMIT (dBm) MARGIN (dB)
-47.72
-54.17
-46.18
-57.95
-21.26
-41.26
-21.26
-41.26
-26.46
-12.91
-24.92
-16.69 RAW VALUE
(dBm)
-49.72
-56.17
-48.18
-59.95 CORRECTION FACTOR (dB) 2 2 2 2 1. Emission level (dBm) = Raw Value (dBuV) + Correction Factor (dB). 2. The other emission levels were very low against the limit. 3. Margin value = Emission level Limit value. Bandedge table NO. FREQ. (MHz) 1 2 3 4 2388.66 PK 2319.88 AV 2486.7 PK 2483.66 AV REMARKS:
EMISSION LEVEL (dBm) LIMIT (dBm) MARGIN (dB)
-42.34
-53.35
-45.69
-58.44
-21.26
-41.26
-21.26
-41.26
-21.08
-12.09
-24.43
-17.18 RAW VALUE
(dBm)
-44.34
-55.35
-47.69
-60.11 CORRECTION FACTOR (dB) 2 2 2 2 1. Emission level (dBm) = Raw Value (dBuV) + Correction Factor (dB). 2. The other emission levels were very low against the limit. 3. Margin value = Emission level Limit value. Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 40 of 64 Report Format Version 5.1.0 802.11b CHANNEL TX Channel 11 FREQUENCY RANGE 1GHz ~ 25GHz Conducted spurious emission table DETECTOR FUNCTION Peak (PK) Average (AV) NO. FREQ. (MHz) 1 2 3 4 4925 PK 4921.875 AV 7387.5 PK 7390.625 AV REMARKS:
EMISSION LEVEL (dBm) LIMIT (dBm) MARGIN (dB)
-47.45
-56.01
-46.66
-57.82
-21.26
-41.26
-21.26
-41.26
-26.19
-14.75
-25.4
-16.56 RAW VALUE
(dBm)
-49.45
-58.01
-48.66
-59.82 CORRECTION FACTOR (dB) 2 2 2 2 1. Emission level (dBm) = Raw Value (dBuV) + Correction Factor (dB). 2. The other emission levels were very low against the limit. 3. Margin value = Emission level Limit value. Bandedge table NO. FREQ. (MHz) 1 2 3 4 2319.88 PK 2319.88 AV 2487.84 PK 2483.66 AV REMARKS:
EMISSION LEVEL (dBm) LIMIT (dBm) MARGIN (dB)
-43.61
-53.18
-42.04
-52.88
-21.26
-41.26
-21.26
-41.26
-22.35
-11.92
-20.78
-11.62 RAW VALUE
(dBm)
-45.61
-55.18
-44.04
-54.88 CORRECTION FACTOR (dB) 2 2 2 2 1. Emission level (dBm) = Raw Value (dBuV) + Correction Factor (dB). 2. The other emission levels were very low against the limit. 3. Margin value = Emission level Limit value. Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 41 of 64 Report Format Version 5.1.0 802.11g CHANNEL TX Channel 1 FREQUENCY RANGE 1GHz ~ 25GHz Conducted spurious emission table DETECTOR FUNCTION Peak (PK) Average (AV) NO. FREQ. (MHz) EMISSION LEVEL (dBm) LIMIT (dBm) MARGIN (dB) 1 2 4828.125 PK 4818.75 AV
-46.92
-58.85
-21.26
-41.26
-25.66
-17.59 RAW VALUE
(dBm)
-48.92
-60.85 CORRECTION FACTOR (dB) 2 2 REMARKS:
1. Emission level (dBm) = Raw Value (dBuV) + Correction Factor (dB). 2. The other emission levels were very low against the limit. 3. Margin value = Emission level Limit value. Bandedge table NO. FREQ. (MHz) 1 2 3 4 2389.8 PK 2389.8 AV 2487.46 PK 2483.66 AV REMARKS:
EMISSION LEVEL (dBm) LIMIT (dBm) MARGIN (dB)
-25.8
-43.92
-48.13
-60.32
-21.26
-41.26
-21.26
-41.26
-4.54
-2.66
-26.87
-19.06 RAW VALUE
(dBm)
-27.8
-45.93
-50.13
-62.32 CORRECTION FACTOR (dB) 2 2 2 2 1. Emission level (dBm) = Raw Value (dBuV) + Correction Factor (dB). 2. The other emission levels were very low against the limit. 3. Margin value = Emission level Limit value. Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 42 of 64 Report Format Version 5.1.0 802.11g CHANNEL TX Channel 6 FREQUENCY RANGE 1GHz ~ 25GHz Conducted spurious emission table DETECTOR FUNCTION Peak (PK) Average (AV) NO. FREQ. (MHz) 1 2 3 4 4865.625 PK 4868.75 AV 7315.625 PK 7312.5 AV REMARKS:
EMISSION LEVEL (dBm) LIMIT (dBm) MARGIN (dB)
-47.5
-59.26
-47.23
-57.94
-21.26
-41.26
-21.26
-41.26
-26.24
-18
-25.97
-16.68 RAW VALUE
(dBm)
-49.5
-61.26
-49.23
-59.94 CORRECTION FACTOR (dB) 2 2 2 2 1. Emission level (dBm) = Raw Value (dBuV) + Correction Factor (dB). 2. The other emission levels were very low against the limit. 3. Margin value = Emission level Limit value. Bandedge table NO. FREQ. (MHz) 1 2 3 4 2388.66 PK 2319.88 AV 2484.42 PK 2483.66 AV REMARKS:
EMISSION LEVEL (dBm) LIMIT (dBm) MARGIN (dB)
-42.07
-54.33
-43.16
-57.88
-21.26
-41.26
-21.26
-41.26
-20.81
-13.07
-21.9
-16.62 RAW VALUE
(dBm)
-44.07
-56.33
-45.16
-59.88 CORRECTION FACTOR (dB) 2 2 2 2 1. Emission level (dBm) = Raw Value (dBuV) + Correction Factor (dB). 2. The other emission levels were very low against the limit. 3. Margin value = Emission level Limit value. Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 43 of 64 Report Format Version 5.1.0 802.11g CHANNEL TX Channel 11 FREQUENCY RANGE 1GHz ~ 25GHz Conducted spurious emission table DETECTOR FUNCTION Peak (PK) Average (AV) NO. FREQ. (MHz) 1 2 3 4 4931.25 PK 4921.875 AV 7384.375 PK 7384.375 AV REMARKS:
EMISSION LEVEL (dBm) LIMIT (dBm) MARGIN (dB)
-48.03
-59.32
-45.68
-57.85
-21.26
-41.26
-21.26
-41.26
-26.77
-18.06
-24.42
-16.59 RAW VALUE
(dBm)
-50.03
-61.32
-47.68
-59.85 CORRECTION FACTOR (dB) 2 2 2 2 1. Emission level (dBm) = Raw Value (dBuV) + Correction Factor (dB). 2. The other emission levels were very low against the limit. 3. Margin value = Emission level Limit value. Bandedge table NO. FREQ. (MHz) 1 2 3 4 2319.88 PK 2319.88 AV 2483.66 PK 2483.66 AV REMARKS:
EMISSION LEVEL (dBm) LIMIT (dBm) MARGIN (dB)
-44.62
-54.01
-24.86
-43.68
-21.26
-41.26
-21.26
-41.26
-23.36
-12.75
-3.6
-2.42 RAW VALUE
(dBm)
-46.62
-56.01
-26.86
-45.68 CORRECTION FACTOR (dB) 2 2 2 2 1. Emission level (dBm) = Raw Value (dBuV) + Correction Factor (dB). 2. The other emission levels were very low against the limit. 3. Margin value = Emission level Limit value. Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 44 of 64 Report Format Version 5.1.0 802.11n(HT20) CHANNEL TX Channel 1 FREQUENCY RANGE 1GHz ~ 25GHz Conducted spurious emission table DETECTOR FUNCTION Peak (PK) Average (AV) NO. FREQ. (MHz) 1 2 4818.75 PK 4818.75 AV REMARKS:
EMISSION LEVEL (dBm) LIMIT (dBm) MARGIN (dB)
-47.26
-58.79
-21.26
-41.26
-26
-17.53 RAW VALUE
(dBm)
-49.26
-60.79 CORRECTION FACTOR (dB) 2 2 1. Emission level (dBm) = Raw Value (dBuV) + Correction Factor (dB). 2. The other emission levels were very low against the limit. 3. Margin value = Emission level Limit value. Bandedge table NO. FREQ. (MHz) 1 2 3 4 2389.8 PK 2389.8 AV 2483.66 PK 2483.66 AV REMARKS:
EMISSION LEVEL (dBm) LIMIT (dBm) MARGIN (dB)
-24.41
-43.5
-48.09
-60.36
-21.26
-41.26
-21.26
-41.26
-3.15
-2.24
-26.83
-19.1 RAW VALUE
(dBm)
-26.41
-45.5
-50.09
-62.36 CORRECTION FACTOR (dB) 2 2 2 2 1. Emission level (dBm) = Raw Value (dBuV) + Correction Factor (dB). 2. The other emission levels were very low against the limit. 3. Margin value = Emission level Limit value. Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 45 of 64 Report Format Version 5.1.0 802.11n(HT20) CHANNEL TX Channel 6 FREQUENCY RANGE 1GHz ~ 25GHz Conducted spurious emission table DETECTOR FUNCTION Peak (PK) Average (AV) NO. FREQ. (MHz) 1 2 3 4 4871.875 PK 4868.75 AV 7303.125 PK 7309.375 AV REMARKS:
EMISSION LEVEL (dBm) LIMIT (dBm) MARGIN (dB)
-48.16
-59.23
-46.94
-57.99
-21.26
-41.26
-21.26
-41.26
-26.9
-17.97
-25.68
-16.73 RAW VALUE
(dBm)
-50.16
-61.23
-48.94
-59.99 CORRECTION FACTOR (dB) 2 2 2 2 1. Emission level (dBm) = Raw Value (dBuV) + Correction Factor (dB). 2. The other emission levels were very low against the limit. 3. Margin value = Emission level Limit value. Bandedge table NO. FREQ. (MHz) 1 2 3 4 2389.04 PK 2319.88 AV 2486.7 PK 2483.66 AV REMARKS:
EMISSION LEVEL (dBm) LIMIT (dBm) MARGIN (dB)
-41.53
-54.37
-43.18
-57.52
-21.26
-41.26
-21.26
-41.26
-20.27
-13.11
-21.92
-16.26 RAW VALUE
(dBm)
-43.53
-56.37
-45.18
-59.52 CORRECTION FACTOR (dB) 2 2 2 2 1. Emission level (dBm) = Raw Value (dBuV) + Correction Factor (dB). 2. The other emission levels were very low against the limit. 3. Margin value = Emission level Limit value. Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 46 of 64 Report Format Version 5.1.0 802.11n(HT20) CHANNEL TX Channel 11 FREQUENCY RANGE 1GHz ~ 25GHz Conducted spurious emission table DETECTOR FUNCTION Peak (PK) Average (AV) NO. FREQ. (MHz) 1 2 3 4 4921.875 PK 4918.75 AV 7381.25 PK 7390.625 AV REMARKS:
EMISSION LEVEL (dBm) LIMIT (dBm) MARGIN (dB)
-47.51
-59.28
-46.73
-57.83
-21.26
-41.26
-21.26
-41.26
-26.25
-18.02
-25.47
-16.57 RAW VALUE
(dBm)
-49.51
-61.28
-48.73
-59.83 CORRECTION FACTOR (dB) 2 2 2 2 1. Emission level (dBm) = Raw Value (dBuV) + Correction Factor (dB). 2. The other emission levels were very low against the limit. 3. Margin value = Emission level Limit value. Bandedge table NO. FREQ. (MHz) 1 2 3 4 2319.88 PK 2319.88 AV 2484.42 PK 2483.66 AV REMARKS:
EMISSION LEVEL (dBm) LIMIT (dBm) MARGIN (dB)
-44.51
-54.34
-24.05
-43.41
-21.26
-41.26
-21.26
-41.26
-23.25
-13.08
-2.79
-2.15 RAW VALUE
(dBm)
-46.51
-56.34
-26.05
-45.41 CORRECTION FACTOR (dB) 2 2 2 2 1. Emission level (dBm) = Raw Value (dBuV) + Correction Factor (dB). 2. The other emission levels were very low against the limit. 3. Margin value = Emission level Limit value. Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 47 of 64 Report Format Version 5.1.0 4.3 6dB BANDWIDTH MEASUREMENT 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT The minimum of 6dB Bandwidth Measurement is 0.5 MHz. 4.3.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER R&S SPECTRUM ANALYZER Note:
MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL FSP40 100037 Nov. 01, 2012 Oct. 31, 2013 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : June 05, 2013 4.3.3 TEST PROCEDURE 1. Set resolution bandwidth (RBW) = 100kHz 2. Set the video bandwidth (VBW) 3 x RBW, Detector = Peak. 3. Trace mode = max hold. 4. Sweep = auto couple. 5. Measure the maximum width of the emission that is constrained by the frequencies associated with the two amplitude points (upper and lower) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission 4.3.4 DEVIATION FROM TEST STANDARD No deviation 4.3.5 TEST SETUP 10dB ATTENUATION PAD EUT SPECTRUM ANALYZER 4.3.6 EUT OPERATING CONDITIONS The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 48 of 64 Report Format Version 5.1.0 4.3.7 TEST RESULTS 802.11b CHANNEL FREQUENCY
(MHz) 2412 2437 2462 CHANNEL FREQUENCY
(MHz) 2412 2437 2462 CHANNEL FREQUENCY
(MHz) 2412 2437 2462 CHANNEL 1 6 11 802.11g CHANNEL 1 6 11 802.11n (HT20) CHANNEL 1 6 11 BANDWIDTH 6dB
(MHz) 7.17 7.14 7.71 6dB BANDWIDTH
(MHz) 15.77 15.12 15.17 6dB BANDWIDTH
(MHz) 15.13 15.15 16.18 Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 49 of 64 MINIMUM LIMIT
(MHz) PASS / FAIL 0.5 0.5 0.5 PASS PASS PASS MINIMUM LIMIT
(MHz) PASS / FAIL 0.5 0.5 0.5 PASS PASS PASS MINIMUM LIMIT
(MHz) PASS / FAIL 0.5 0.5 0.5 PASS PASS PASS Report Format Version 5.1.0 4.4 CONDUCTED OUTPUT POWER MEASUREMENT 4.4.1 LIMITS OF MAXIMUM PEAK OUTPUT POWER MEASUREMENT For systems using digital modulation in the 24002483.5 MHz band: 1 Watt
(30dBm) 4.4.2 INSTRUMENTS DESCRIPTION &
MANUFACTURER Power Meter Power Sensor MODEL NO. SERIAL NO. ML2495A MA2411B 0824006 0738172 CALIBRATED DATE May 20, 2013 May 20, 2013 CALIBRATED UNTIL May 19, 2014 May 19, 2014 Note:
1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : June 05, 2013 4.4.3 TEST PROCEDURES The peak power sensor was used on the output port of the EUT. A power meter was used to read the response of the peak power sensor. Record the peak power level. 4.4.4 DEVIATION FROM TEST STANDARD No deviation. 4.4.5 TEST SETUP 10dB ATTENUATION PAD EUT Peak Power Sensor Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 50 of 64 Power Meter Report Format Version 5.1.0 4.4.6 EUT OPERATING CONDITIONS Same as Item 4.3.6 Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 51 of 64 Report Format Version 5.1.0 4.4.7 TEST RESULTS 802.11b CHANNEL 1 6 11 802.11g CHANNEL 1 6 11 FREQUENCY
(MHz) 2412 2437 2462 PEAK POWER
(mW) 92.470 88.512 88.920 PEAK POWER
(dBm) 19.66 19.47 19.49 LIMIT (dBm) PASS/FAIL 30 30 30 PASS PASS PASS FREQUENCY
(MHz) 2412 2437 2462 PEAK POWER
(mW) 233.346 218.273 209.894 PEAK POWER
(dBm) 23.68 23.39 23.22 LIMIT (dBm) PASS/FAIL 30 30 30 PASS PASS PASS 802.11n (HT20) FREQUENCY
(MHz) 2412 2437 2462 PEAK POWER
(mW) 237.137 224.388 212.324 PEAK POWER
(dBm) 23.75 23.51 23.27 LIMIT (dBm) PASS/FAIL 30 30 30 PASS PASS PASS CHANNEL 1 6 11 Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 52 of 64 Report Format Version 5.1.0 4.5 AVERAGE OUTPUT POWER 4.5.1 FOR REFERENCE. 4.5.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER Power Meter Power Sensor MODEL NO. SERIAL NO. ML2495A MA2411B 0824006 0738172 CALIBRATED DATE May 20, 2013 May 20, 2013 CALIBRATED UNTIL May 19, 2014 May 19, 2014 Note:
1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : June 05, 2013 4.5.3 TEST PROCEDURES The average power sensor was used on the output port of the EUT. A power meter was used to read the response of the power sensor. Record the power level. 4.5.4 TEST SETUP EUT Average Power Sensor Power Meter 10dB ATTENUATION PAD 4.5.5 EUT OPERATING CONDITIONS Same as Item 4.3.6 Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 53 of 64 Report Format Version 5.1.0 4.5.6 TEST RESULTS 802.11b CHANNEL FREQUENCY (MHz) 1 6 11 802.11g 2412 2437 2462 CHANNEL FREQUENCY (MHz) 1 6 11 802.11n (HT20) 2412 2437 2462 CHANNEL FREQUENCY (MHz) 1 6 11 2412 2437 2462 AVERAGE POWER
(mW) 45.814 47.315 46.881 AVERAGE POWER
(mW) 31.333 33.189 30.974 AVERAGE POWER
(mW) 29.309 33.037 28.510 AVERAGE POWER
(dBm) 16.61 16.75 16.71 AVERAGE POWER
(dBm) 14.96 15.21 14.91 AVERAGE POWER
(dBm) 14.67 15.19 14.55 Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 54 of 64 Report Format Version 5.1.0 4.6 POWER SPECTRAL DENSITY MEASUREMENT 4.6.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT The Maximum of Power Spectral Density Measurement is 8dBm. 4.6.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER R&S Spectrum Analyzer Note:
MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL FSP40 100037 Nov. 01, 2012 Oct. 31, 2013 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : June 05, 2013 4.6.3 TEST PROCEDURE 1. Set the RBW = 3 kHz, VBW =10 kHz, Detector = peak. 2. Sweep time = auto couple, Trace mode = max hold, allow trace to fully stabilize. 3. Use the peak marker function to determine the maximum amplitude level. 4.6.4 DEVIATION FROM TEST STANDARD No deviation 4.6.5 TEST SETUP 4.6.6 EUT OPERATING CONDITION Same as Item 4.3.6 10dB ATTENUATION PAD EUT Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 55 of 64 SPECTRUM ANALYZER Report Format Version 5.1.0 4.6.7 TEST RESULTS 802.11b Channel 1 6 11 802.11g Channel 1 6 11 802.11n (HT20) Channel 1 6 11 FREQUENCY
(MHz) 2412 2437 2462 FREQUENCY
(MHz) 2412 2437 2462 FREQUENCY
(MHz) 2412 2437 2462 PSD
(dBm/3kHz) Limit
(dBm/3kHz)
-6.56
-7.56
-7.16 PSD
(dBm/3kHz)
-11.25
-10.14
-10.52 PSD
(dBm/3kHz)
-11.65
-10.71
-11.62 8 8 8 Limit
(dBm/3kHz) 8 8 8 Limit
(dBm/3kHz) 8 8 8 PASS
/FAIL PASS PASS PASS PASS
/FAIL PASS PASS PASS PASS
/FAIL PASS PASS PASS Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 56 of 64 Report Format Version 5.1.0 4.7 CONDUCTED OUT-BAND EMISSION MEASUREMENT 4.7.1 LIMITS OF CONDUCTED OUT-BAND EMISSION MEASUREMENT Below 20dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth). 4.7.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER R&S Spectrum Analyzer Note:
MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL FSP40 100037 Nov. 01, 2012 Oct. 31, 2013 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : June 05, 2013 4.7.3 TEST PROCEDURE Measurement Procedure - Reference Level 1. Set the RBW = 100 kHz. 2. Set the VBW 300 kHz. 3. Detector = peak. 4. Sweep time = auto couple. 5. Trace mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum power level in any 100 kHz band segment within the fundamental EBW. Measurement Procedure Unwanted Emission Level 1. Set RBW = 100 kHz. 2. Set VBW 300 kHz. 3. Set span to encompass the spectrum to be examined 4. Detector = peak. 5. Trace Mode = max hold. 6. Sweep = auto couple. Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 57 of 64 Report Format Version 5.1.0 4.7.4 DEVIATION FROM TEST STANDARD No deviation 4.7.5 TEST SETUP EUT SPECTRUM ANALYZER 10dB ATTENUATION PAD 4.7.6 EUT OPERATING CONDITION Same as Item 4.3.6 4.7.7 TEST RESULTS The spectrum plots are attached on the following pages. D1 line indicates the highest level, and D2 line indicates the 20dB offset below D1. It shows compliance with the requirement. Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 58 of 64 Report Format Version 5.1.0 802.11b:
CH 1 CH 6 CH 11 Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 59 of 64 Report Format Version 5.1.0 802.11g:
CH 1 CH 6 CH 11 Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 60 of 64 Report Format Version 5.1.0 802.11n (HT20):
CH 1 CH 6 CH 11 Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 61 of 64 Report Format Version 5.1.0 5. PHOTOGRAPHS OF THE TEST CONFIGURATION Please refer to the attached file (Test Setup Photo). Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 62 of 64 Report Format Version 5.1.0 6. INFORMATION ON THE TESTING LABORATORIES We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following:
Linko EMC/RF Lab:
Tel: 886-2-26052180 Fax: 886-2-26052943 Hwa Ya EMC/RF/Safety/Telecom Lab:
Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com Hsin Chu EMC/RF Lab:
Tel: 886-3-5935343 Fax: 886-3-5935342 The address and road map of all our labs can be found in our web site also. Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 63 of 64 Report Format Version 5.1.0 7. APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No modifications were made to the EUT by the lab during the test.
--- END ---
Report No.: RF130520E14 Cancels and replaces the report No.: IC120322E03 dated Apr. 10, 2012 64 of 64 Report Format Version 5.1.0
1 | Test Setup Photos | Test Setup Photos | 421.12 KiB | / January 08 2013 |
PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Report No.: 120702E04 1 of 5 RADIATED EMISSION TEST (Below 1GHz) Report No.: 120702E04 2 of 5 Report No.: 120702E04 3 of 5 RADIATED EMISSION TEST (Above 1GHz) Report No.: 120702E04 4 of 5 Report No.: 120702E04 5 of 5
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2013-06-24 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2013-06-24
|
||||
1 | Applicant's complete, legal business name |
Universal Global Scientific Industrial Co., Ltd.
|
||||
1 | FCC Registration Number (FRN) |
0010188456
|
||||
1 | Physical Address |
141, Lane 351, Sec.1, Taiping Road, Tsaotuen
|
||||
1 |
141, Lane 351, Sec.1, Taiping Road
|
|||||
1 |
Nantou
|
|||||
1 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
c******@curtis-straus.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
COF
|
||||
1 | Equipment Product Code |
WMNBM11
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
M**** S****
|
||||
1 | Title |
Manager
|
||||
1 | Telephone Number |
886-4******** Extension:
|
||||
1 | Fax Number |
886-4********
|
||||
1 |
m******@usiglobal.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 08/01/2013 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 802.11bgn Wireless LAN Module | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Single Modular Approval | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output power listed is conducted. Single modular approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators and end users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
|
||||
1 | Name |
R**** C******
|
||||
1 | Telephone Number |
+886-******** Extension:
|
||||
1 | Fax Number |
+886-********
|
||||
1 |
r******@tw.bureauveritas.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.2370000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC