FCC ID: 2AFZZC3JH Mobile Phone (LTE/WCDMA/GSM/BT/WIFI)

<6H!cboe203

This device may be restricted for use, depending on local network. GDD

Regulatory labels or select Settings, then type Regulatory labels into the search bar. mphp mphp YYYYYYYYYYYY B YY!!

31YYYYYY

!216h!

GDD 371nn

Redmi 8 Pro Mi XX User Guide During SAR testing, this device was set to transmit at its highest certied power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation of 5 mm. SAR compliance for body operation is based on a separation distance of 5 mm between the unit and the human body.Carry this device at least 5 mm away from your body to ensure RF exposure level compliant or lower to the reported level. To support body operation, choose the belt clips or holsters,which do notcontain metallic components, to maintain a separation of 5 mmbetween this deviceand yourbody. RFexposure compliance with any body accessory, which contains metal, was not tested and certied, and use such body-worn accessory should be avoided. EU Certication Information (Highest SAR) SAR 10 g limit: 2.0 W/Kg, SAR Value: Head: X.XXX W/Kg, Body: X.XXX W/Kg (5 mm distance). Legal Information This device may be operated in all member states of the EU. Observe national and local regulations where the device is used. This device is restricted to indoor use only when operating in 5150 to 5350Mhz frequency range in following countries :

AT EE IT PT BE FI LV RO BG FR LT SK HR DE LU SI CY EL MT ES CZ HU NL SE DK IE PL UK Receiver Category 2 Ensure the power adapter used meets the requirements of Clause 2.5 in IEC60950-1/EN60950-1 and has been tested and approved according to national or local standards. Frequency Bands and Power This mobile phone oers the following frequency bands in EU areas only and maximum radio-frequency power:

GSM 900: 35 dBm GSM 1800: 32 dBm UMTS band 1/8: 25 dBm LTE band 1/3/7/8 /20/28/38/40: 25.7 dB m Bluetooth: 20 dBm Wi-Fi 2.4 GHz band: 20 dBm Wi-Fi 5 GHz: 5150~5250 MHz: 20 dBm, 5250~5350 MHz: 20 dBm, 5470~5725 MHz: 20 dBm, 5725~5825 MHz: 14 dBm 76nn n n 1 3 2

6H!TVC!7H FCC Regulations E-label This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF Exposure Information (SAR) This device meets the governments requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy. The exposure standard for wireless devices employs a unit of measurement known as the Specic Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/Kg. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and positions the device a minimum of 1.0 cm from the body. RF exposure compliance with any body-worn accessory that contains metal was not tested and certied, and use of such body-worn accessory should be avoided. Accessory available in market and must be used to keep use distance 1.0 cm from EUT to Body for Body-worn operation. FCC Note Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 02 48 SAT. 16 AUG. Volume Buttons Power Button Thank you for choosing Redmi 8 Pro Long press the power button to turn on the device. Follow the on-screen instructions to congure the device. For more information Visit our ocial website: www.mi.com. MIUI Redmi 8 Pro comes pre-installed with MIUI, our customised Android-based OS which pushes frequent updates and user-friendly features suggested by over 200 million active users worldwide. For more information, please visit www.miui.com. SIM Card Tray:

Nano-SIM Nano-SIM Micro SD About Dual SIM:

Dual 4G SIM requires the support of local telecom operator services, and may not be available in all regions. Supports dual nano-SIM cards. When using both SIM card slots, either card can be set as the primary card. Only certain regions and telecom operators support VoLTE. System updates may be applied when network optimization occurs. For details, please refer to the system version in use on the device. USB Type-C Port TJN TJN USB Port Qbhf!12 This device has an electronic label for certication information. To access it, please select Settings > About Phone > Certication or select Settings, then type Certication into the search bar. Model: M1908C3JG 1908 indicates that this product will be launched after 201908. Disclaimer This User Guide is published by Xiaomi or its local aliated company. Improvements and changes to this User Guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Xiaomi at any time and without notice. Such changes will, however, be incorporated into new editions of this User Guide. All illustrations are for illustration purposes only and may not accurately depict the actual device. This smartphone is designed with Corning Gorilla Glass 5 Manufacturer: Xiaomi Communications Co., Ltd. Manufacturer postal address: The Rainbow City of China Resources, NO. 68, Qinghe Middle Street, Haidian District, Being, China 100085 Brand: Redmi Brand: MI All rights reserved by Xiaomi Inc. Model: M1908C3JH 000000000000-A 000000000000-A Correctly dispose of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle responsibly to promote the sustainable reuse of material resources. To safely recycle your device, please use return and collection systems or contact the retailer where the device was originally purchased. For Environment Declaration, please refer to the link below:

http://www.mi.com/en/about/environment/

CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS. To prevent possible hearing damage,do not listen at high volume levels for long periods. For more important safety information, please refer to User Manual in the link below :

http://www.mi.com/en/certication/

Important safety information Read all the safety information below before using your device. Using unauthorized cables, power adapters, or batteries can cause re, explosion, or pose other risks. Use only authorized accessories which are compatible with your device. This devices operating temperature range is 0 C~40 C. Using this device in the environments outside of this temperature range may damage the device. If your device is provided with a built-in battery, dont attempt to replace the battery yourself to avoid damaging the battery or the device. Charge this device only with the included or authorized cable and power adapter. Using other adapters may cause re, electric shock, and damage the device and the adapter. After charging is complete, disconnect the adapter from both the device and the power outlet. Do not charge the device longer than 12 hours. The battery must be recycled or disposed of separately from household waste. Mishandling the battery may cause re or explosion. Dispose of or recycle the device, its battery and accessories according to the local regulations. Do not disassemble, hit, crush, or burn the battery. In case of deformation, stop using the battery immediately.

Do not short circuit the battery to avoid overheating, burns, or other personal injuries. Do not place the battery in the high-temperature environments. Overheating may cause explosion. Do not disassemble, hit, or crush the battery to avoid battery leaks, overheating, or explosion. Do not burn the battery to avoid re or explosion. In case of deformation, stop using the battery immediately.

Keep your device dry. Do not try to repair the device yourself. If any part of the device does not work properly, contact Mi customer support or bring your device to an authorized repair center. Connect other devices according to their instruction manuals. Do not connect incompatible devices to this device. For AC/DC adapters, the socket-outlet shall be installed near the equipment and shall be easily accessible.

Safety precautions Observe any law and rule which restricts using mobile phones in specic cases and environments. Do not use your phone in petrol stations and explosive atmospheres and potentially explosive environments include fuelling areas, below decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles, such as grain, dust, or metal powders. Obey all posted signs to turn o wireless devices such as your phone or other radio equipment. Turn o your mobile phone or wireless device when in a blasting area or in areas posted turn o two-way radios or electronic devices to avoid interfering with blasting operations. Do not use your phone in the hospital operating rooms, emergency rooms, or intensive care units. Comply with the current rules and regulations of hospitals and health centers. Please consult your doctor and the device manufacturer to determine if operation of your phone may interfere with the operation of your medical device. To avoid potential interference with the pacemaker, maintain a separation of 15cm between the mobile phone and the pacemaker. To achieve this, use the phone on the opposite ear to your pacemaker and do not carry it in a breast pocket. Do not use your phone near hearing aids, cochlear implants, etc., to avoid interference with medical equipment. Respect aircraft safety regulations and turn o your phone on board the aircraft when required. When driving a vehicle, use your phone in accordance with the relevant trac laws and regulations. To avoid lightning strike, do not use your phone outdoors during thunderstorms. Do not use your phone to make calls while it is charging. Do not use your phones in places with high humidity such as bathrooms. Doing so may result in electric shock, injury, re, and charger damage. Security notice Update your phones operating system using the built-in software update feature, or visit our authorized service outlets. Updating software through other means may damage the device or result in data loss, security issues, and other risks. EU Regulations RED Declaration of Conformity Hereby, Xiaomi Communications Co., Ltd., declares that this GSM/GPRS/

EDGE/UMTS/LTE Digital Mobile Phone with Bluetooth and WiFi M1908C3JG is in compliance with the essential requirements and other relevant provisions of the RE Directive 2014/53/EU. The full text of the EU declaration of conformity could be consulted at www.mi.com/en/certication RF Exposure Information (SAR) This device is compliance with Specic Absorption Rate (SAR) for general population/uncontrolled exposure (Localized 10-gram SAR for head and trunk, limit:

2.0 W/kg) specied in Council Recommendation 1999/519/EC, and ICNIRP Guidelines, and RED (Directive 2014/53/EU).

<6H!TVC!7H

#0TVC!7H#

Qboupof!Dppm!Hsbz!9D

Bsjbm!!4qu

FCC E-Label Information A. Images of the e-label screen are provided below:

B. Access to the required information on the e-label Users are able to access the information in no more than three steps in a devices menu. The actual steps are:

Settings> About Phone >Certification or select Setting, then type "Certification" into the search bar. Certification Model M1908C3JH Europe U.S FCC ID:2AFZZC3JH Mexico NOM +4, NYCE 5V===2A

Xiaomi Communications Co.,Ltd The Rainbow City of China Resources,No.68,Qinghe Middle Street,Haidian District,Beijing,100000,China UNII Declaration Letter We have declared below featured for FCC equipment authorization, device FCC ID: 2AFZZC3JH

(1) DFS Device --

Master, Client with Radar detection capability , N/A Client without radar detection capability,

(2) Active / Passive Scanning , adhoc mode access point capability Frequency Band

(MHz) Active Scanning

(the device can transmit a probe

(beacon)) Ad Hoc Mode capability passive scanning

(where the device is can listen only with no probes) 2412 2462 MHz 2422 2452 MHz 5745 5825 MHz 5755 5795 MHz 5180 5240 MHz 5190 5230 MHz 5260 5320 MHz 5270 5310 MHz 5500 5700 MHz Yes, No 5510 5670 MHz Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No Yes, Yes, No Yes, Yes, No Yes, Yes, No Yes, Yes, No Yes, Yes, No Yes, Yes, No Yes, No Yes, No Yes, No No No No No No No Yes, No Yes, No Yes, No Yes, No Access point capability Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No

(3) Country code selection ability -

If no, pls explain how was implemented : use Microsoft network utility

(4) Meet 15.202 requirement - Yes , pls check below :

Yes , No No , A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.

(5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply , No Apply ,

(If apply , pls help to provide explanation on how it was implement (By hardware or software , and how software was controlled) If you have any questions, please feel free to contact me at the address shown below. Yours sincerely, Signatory Xiaomi Communications Co., Ltd. Printed Name:Jiao Xiao Gang PositionCertification Director

Xiaomi Communications Co., Ltd. The Rainbow City of China Resources,NO.68, Qinghe Middle Street,Haidian District, Beijing, 100000, China Tel: 010 6060 6666 ; Fax: 010 6060 6666 Date: August 8, 2019 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidentiality FCC ID: 2AFZZC3JH To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commissions rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. Operational Description Schematic Diagram Block Diagram Part List Tune-up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission s policy, in order to comply with the marketing regulations in 47 CFT 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, _ Xiaogang Jiao jiaoxiaogang@xiaomi.com ___

Xiaomi Communications Co., Ltd. The Rainbow City of China Resources,NO.68, Qinghe Middle Street,Haidian District, Beijing, 100000, China Tel: 010 6060 6666 ; Fax: 010 6060 6666 Statement We, Xiaomi Communications Co., Ltd., states that our device, Model name:

M1908C3JH with FCC ID: 2AFZZC3JH is a LTE/WCDMA/GSM Mobile Phone with WLAN 2.4GHz/5GHz and Bluetooth.The hardware supports LTE Band 40, but they will be disabled by software and are not available in US market. Xiaogang Jiao jiaoxiaogang@xiaomi.com

Xiaomi Communications Co., Ltd. The Rainbow City of China Resources, NO.68, Qinghe Middle Street, Haidian District, Beijing, China To who it may concern:

We, Xiaomi Communications Co., Ltd., declare on our sole responsibility for the product of C3J as below:

The differences between FCC ID 2AFZZC3JG and 2AFFZZC3JH are as below:

1,RF spectrum Part:

C3J_B20: GSM:B2/3/5/8;WCDMA:B1/2/4/5/8; LTE TDD:B1/2/3/4/5/7/8/20; LTE FDD:B38/40;

C3J B28: GSM:B2/3/5/8;WCDMA:B1/2/4/5/8; LTE TDD:B1/2/3/4/5/7/8/20/28; LTE FDD:B38/40;

2. RF differences RF SW Part: FCC ID 2AFZZC3JG has disabled LTE B28. RF HW PART:

Use the same DRX Saw and Duplexer,for the 2AFFZZC3JH version, Added RF B28 components DRX Saw B28: SFH780AA402from Wisol Duplexer B28A: B39771B8538P810 from Epcos;

B28B: B39791B8539P810 from RF360;

3. Test plan FCC ID :2AFZZC3JG and 2AFFZZC3JH Test Items Test Conditions B20 B28 SAR WWAN WiFi 802.11a/b/g/n/ac(20)(40)(80) Head Body Head Body B28 band retest, overlap band test the worst case Part15B EMI Verify RE worse case Radiated Emission AC Conducted Emission RF Conducted Measurement All test FCC Part22H Radiated Spurious Emission WWAN Band 850 WWAN Band 1900 ERP/EIRP Test RF Conducted Measurement ERP/EIRP Test Part24E Radiated Spurious Emission Xiaomi Communications Co., Ltd. The Rainbow City of China Resources, NO.68, Qinghe Middle Street, Haidian District, Beijing, China Verify power and RSE worse case Part27L Radiated Spurious Emission Part27 Radiated Spurious Emission Part27 Radiated Spurious Emission WWAN AWS Band WWAN Other band WWAN CA band Bluetooth Radiated Spurious Emission Part15C WiFi 802.11a/b/g/n(20 Radiated Spurious Emission RF Conducted Measurement ERP/EIRP Test RF Conducted Measurement ERP/EIRP Test RF Conducted Measurement ERP/EIRP Test RF Conducted Measurement AC Conducted Emission RF Conducted Measurement AC Conducted Emission RF Conducted Measurement Radiated Spurious Emission AC Conducted Emission WiFi Part15E 802.11a/b/g/n/ac(20)(40)(80) Sincerely yours, DFS DFS Date: August 15, 2019 Name: Jiao, Xiaogang E-Mail: jiaoxiaogang@xiaomi.com Function: Product Certification Signature:

Signed for and on behalf of: Xiaomi Communications Co., Ltd. Place: The Rainbow City of China Resources,NO.68,Qinghe Middle Street,Haidian District,Beijing,China

FCC SAR Test Report Report No.: R1907A0358S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 183 of 223 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. FCC SAR Test Report Report No.: R1907A0358S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 184 of 223 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. FCC SAR Test Report Report No.: R1907A0358S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 185 of 223 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. FCC SAR Test Report Report No.: R1907A0358S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 186 of 223 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. FCC SAR Test Report Report No.: R1907A0358S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 187 of 223 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. FCC SAR Test Report Report No.: R1907A0358S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 188 of 223 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. FCC SAR Test Report Report No.: R1907A0358S1 ANNEX H: D2450V2 Dipole Calibration Certificate TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 189 of 223 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. FCC SAR Test Report Report No.: R1907A0358S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 190 of 223 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. FCC SAR Test Report Report No.: R1907A0358S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 191 of 223 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. FCC SAR Test Report Report No.: R1907A0358S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 192 of 223 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. FCC SAR Test Report Report No.: R1907A0358S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 193 of 223 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. FCC SAR Test Report Report No.: R1907A0358S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 194 of 223 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. FCC SAR Test Report Report No.: R1907A0358S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 195 of 223 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. FCC SAR Test Report Report No.: R1907A0358S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 196 of 223 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. FCC SAR Test Report Report No.: R1907A0358S1 ANNEX I: D2600V2 Dipole Calibration Certificate TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 197 of 223 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. FCC SAR Test Report Report No.: R1907A0358S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 198 of 223 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. FCC SAR Test Report Report No.: R1907A0358S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 199 of 223 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. FCC SAR Test Report Report No.: R1907A0358S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 200 of 223 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. FCC SAR Test Report Report No.: R1907A0358S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 201 of 223 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. FCC SAR Test Report Report No.: R1907A0358S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 202 of 223 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. FCC SAR Test Report Report No.: R1907A0358S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 203 of 223 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. FCC SAR Test Report Report No.: R1907A0358S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 204 of 223 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. FCC SAR Test Report Report No.: R1907A0358S1 ANNEX J: D5GHzV2 Dipole Calibration Certificate TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 205 of 223 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. FCC SAR Test Report Report No.: R1907A0358S1 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003S Page 206 of 223 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd.