|
app
s
|
Applicant Information
|
|
|
1 2 3 4 5 6 7 8
|
Effective |
2024-12-16
|
|
1 2 3 4 5 6 7 8
|
Applicant's complete, legal business name |
Xiaomi Communications Co., Ltd.
|
|
1 2 3 4 5 6 7 8
|
FCC Registration Number (FRN) |
0024904948
|
|
1 2 3 4 5 6 7 8
|
Physical Address |
#019, 9th Floor, Building 6
|
|
1 2 3 4 5 6 7 8
|
Beijing, N/A 100085
|
|
1 2 3 4 5 6 7 8
|
China
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4 5 6 7 8
|
TCB Application Email Address |
Q******@sporton-usa.com
|
|
1 2 3 4 5 6 7 8
|
TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
1 2 3 4 5 6 7 8
|
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
1 2 3 4 5 6 7 8
|
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4 5 6 7 8
|
Grantee Code |
2AFZZ
|
|
1 2 3 4 5 6 7 8
|
Equipment Product Code |
PNFAR
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4 5 6 7 8
|
Name |
q****** z******
|
|
1 2 3 4 5 6 7 8
|
Telephone Number |
010 6********
|
|
1 2 3 4 5 6 7 8
|
Fax Number |
010 6********
|
|
1 2 3 4 5 6 7 8
|
E-mail |
m******@xiaomi.com
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 5 6 7 8 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 5 6 7 8 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 5 6 7 8 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 06/14/2025 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 5 6 7 8 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 5 6 7 8 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral |
| 1 2 3 4 5 6 7 8 | DXX - Part 15 Low Power Communication Device Transmitter |
| 1 2 3 4 5 6 7 8 | DTS - Digital Transmission System |
| 1 2 3 4 5 6 7 8 | CXX - Communications Rcvr for use w/ licensed Tx and CBs |
| 1 2 3 4 5 6 7 8 | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 4 5 6 7 8 | 6XD - 15E 6 GHz Low Power Indoor Client |
| 1 2 3 4 5 6 7 8 | PCE - PCS Licensed Transmitter held to ear |
| 1 2 3 4 5 6 7 8 | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 4 5 6 7 8 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Mobile Phone |
| 1 2 3 4 5 6 7 8 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
| 1 2 3 4 5 6 7 8 | Modular Equipment Type | Does not apply |
| 1 2 3 4 5 6 7 8 | Purpose / Application is for | Original Equipment |
| 1 2 3 4 5 6 7 8 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 4 5 6 7 8 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 5 6 7 8 | Grant Comments | The highest SAR values for product specific (10g SAR) and simultaneous transmission conditions are < 0.10 W/kg and 3.86 W/kg. |
| 1 2 3 4 5 6 7 8 | Output Power listed is the maximum conducted output power. SAR compliance for body-worn operating configurations is limited to belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 15.0 mm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router) and simultaneous transmission exposure conditions are 1.08 W/kg, 0.41 W/kg, 0.75 W/kg and 1.59 W/kg, respectively. This device supports 20 MHz and 40 MHz bandwidths modes. |
| 1 2 3 4 5 6 7 8 | Output Power listed is the maximum conducted output power. SAR compliance for body- worn operating configurations is limited to belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 15.0 mm, as described in this filing. End-users must be informed of the body- worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router) and simultaneous transmission exposure conditions are 0.50 W/kg, < 0.10 W/kg, 0.17 W/kg and 1.59 W/kg, respectively. |
| 1 2 3 4 5 6 7 8 | Output Power is EIRP. Device operates with specific antennas in MIMO configurations as described in this filing. RF exposure compliance for body-worn operating configurations is limited to belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 15.0 mm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. This device supports 20, 40, 80 and 160 MHz modes. Device 6 GHz operation is intended for indoor use only. |
| 1 2 3 4 5 6 7 8 | Output Power is EIRP and ERP for above and below 1 GHz, respectively, except for Part 90 LTE Band 26 emissions, which are conducted. SAR compliance for body-worn operating configurations is limited to belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 15.0 mm, as described in this filing. End-users must be informed of the body- worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), simultaneous transmission and product specific (10g SAR) exposure conditions are 1.09 W/kg, 1.09 W/kg, 1.03 W/kg, 1.59 W/kg and 2.56 W/kg, respectively. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2 and 4; LTE of 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Band 7; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13 and 17; LTE of 1.4, 3, 5, 10 and 15 MHz bandwidth modes for FDD LTE Band 26; and LTE of 5, 10, 15 and 20 MHz bandwidth modes for TDD LTE Bands 38, 41 and 42. This device also supports LTE uplink carrier aggregation as described in this filing. This device also supports Frequency Range 1 5G NR modes of 20, 30 and 50 MHz bandwidth modes for TDD Band n41; and 20, 30, 40, 50, 60, 80, 90 and 100 MHz bandwidth modes for TDD Bands n77 and n78. Frequency Range 1 5G NR ENDC modes are supported by this device, as described in this filing. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations. |
| 1 2 3 4 5 6 7 8 | Output Power listed is the maximum conducted output power. SAR compliance for body-worn operating configurations is limited to belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 15.0 mm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), simultaneous transmission and product specific (10g SAR) exposure conditions are 1.09 W/kg, 0.52 W/kg, 0.66 W/kg, 1.59 W/kg and 2.59 W/kg, respectively. This device supports 20, 40, 80 and 160 MHz bandwidths modes. |
| 1 2 3 4 5 6 7 8 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 5 6 7 8 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4 5 6 7 8
|
Firm Name |
Sporton International Inc. (Kunshan)
|
|
1 2 3 4 5 6 7 8
|
Name |
J**** T******
|
|
1 2 3 4 5 6 7 8
|
Telephone Number |
+86 0********
|
|
1 2 3 4 5 6 7 8
|
E-mail |
J******@sporton.com.tw
|
|