FCC ID: 2AFZZ119VL Mobile Phone with GSM, WCDMA, LTE, Bluetooth and WiFi

Redmi 10 2022 Quick Start Guide 18 02 48 SAT. AUG 16 Volume Button Power Button USB Type-C Port 19 PLEASE READ THIS DOCUMENT BEFORE USING YOUR PRODUCT Thank you for choosing Redmi 10 2022 Long press the Power Button to turn on the device. Follow the on-screen instructions to configure the device. For more information, visit our official website: www.mi.com/global/service/userguide MIUI Redmi 10 2022 comes with MIUI pre-installed. MIUI is our user-friendly, customized Android-based OS that is frequently updated based on suggestions from over 200 million active users globally. For more information, please visit en.miui.com SIM Card Tray Nano-SIM Nano-SIM Nano-SIM Micro SD About Dual SIM The 4G Dual SIM service requires support from local telecom operators. This may not be available in all regions. Supports two nano-SIM cards. When both SIM card slots are used, you can select either SIM card as the primary card. Only telecom operators in certain regions support VoLTE. System updates may be applied when the network is upgraded. Please refer to the system version used by the device for more information. Do not insert non-standard SIM cards into the SIM card tray as this may damage the SIM card tray. WARNING: Do not disassemble this device. 20 WEEE Correct disposal of this product: This symbol indicates that this product should not be discarded with other waste. To prevent harm to the environment or human health from inappropriate waste disposal, and to promote the sustainable reuse of resources, please recycle responsibly. To return your used device, please use an authorized collection system or contact the location at which you purchased the product. They can have this product safely recycled. For information regarding the environment, please go to the following link:

www.mi.com/en/about/environment CAUTION Risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. To prevent potential hearing damage, do not listen at high volume levels for extended periods of time. For safety information, please refer to the user manual at the following link: www.mi.com/en/certification Important Safety Information Please read all of the safety information below before using your device. Using unauthorized cables, power adapters or batteries may cause fire, explosion or other hazards. Only use authorized accessories that are compatible with your device. The operating temperature range of this device is 0C to 40C. Using this device in environments outside of this temperature range may damage the device. If the device has a built-in battery, do not attempt to replace the battery yourself, as this may cause damage to the battery or the device. Only charge this device with the supplied or an authorized power adapter and cable. Using other adapters may cause fire, electric shock or damage to the device and adapter. After charging is complete, disconnect the adapter from both the device and the power outlet. Do not charge the device for more than 12 hours. The battery must be recycled or disposed of separately from household waste. Mishandling the battery may cause fire or explosion. Dispose of or recycle the device, its battery and accessories in accordance with local regulations. Do not disassemble, hit, crush or burn the battery. If the battery appears deformed, stop using it immediately.

- Do not short-circuit the battery, as this may cause overheating, burns or other personal injury.

- Keep the battery away from high-temperature environments.

- Overheating may cause explosion.

- Do not disassemble, hit or crush the battery, as this may cause leakage, overheating or explosion. 21

- Do not burn the battery, as this may cause a fire or explosion.

- If the battery appears deformed, stop using it immediately. The user must not remove or alter the battery. The battery should only be removed or repaired by one of the manufacturer's authorized repair centers. Keep your device dry. Do not try to repair the device yourself. If any part of the device is not working properly, contact Mi customer support or take your device to an authorized repair center. Connect other devices by following their instruction manuals. Do not connect incompatible devices to this device. For AC/DC adapters, power outlets should be close to the device and easily accessible. Safety Precautions Comply with all rules and regulations regarding the restriction of cell phone use in specific situations and environments. Do not use your cell phone in gas stations or in any explosive atmospheres or potentially explosive environments. This includes: fueling areas; below deck on boats; fuel or chemical transfer or storage facilities; and areas in which the air contains chemicals or particles, e.g. grains, dust or metal powders. Obey all posted signs to turn off wireless devices such as your cell phone or other radio equipment. Turn off your cell phone or wireless device when you are at implosion sites or in areas with instructions to turn off "two-way radios" or "electronic devices", as this may interfere with the implosion. Do not use your cell phone in hospital operating rooms, emergency rooms or intensive care units. Always comply with the rules and regulations at hospitals and health centers. Consult your physician and the device manufacturer to determine whether using your cell phone may affect the performance of your medical device. To avoid potential interference with pacemakers, always maintain a minimum distance of 15 cm (6 inches) between your cell phone and pacemaker. To do this, hold your cell phone to the ear furthest from your pacemaker and do not carry it in your breast pocket. Do not use your cell phone near hearing aids, cochlear implants or similar devices, as it may interfere with the medical equipment. Comply with aviation safety regulations and turn off your phone when on When driving, comply with relevant traffic laws and regulations regarding board an aircraft as necessary. the use of cell phones. Do not use your cell phone outdoors during lightning storms. Do not use your cell phone to make calls while it is charging. Do not use your cell phone in areas of high humidity, such as bathrooms, as this may cause electric shock, injury, fire or damage to the charger. 22 Security Statement Please update your phone's operating system using the built-in software update feature or visit any of our authorized service outlets. Updating the software in any other way may damage the device or cause data loss, security issues or other risks. EU Regulations RED Declaration of Conformity Xiaomi Communications Co., Ltd. hereby declares that this 21121119VL GSM/

GPRS/EDGE/UMTS/LTE cell phone with Bluetooth and Wi-Fi complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full EU Declaration of Conformity text can be consulted at www.mi.com/en/certification RF (Radio Frequency) Exposure Information

(SAR Specific Absorption Rate) This device complies with the SAR limits for the general population/

uncontrolled exposure (localized SAR of 10 g for the head and trunk, limit:

2.0 W/kg) specified in Council Recommendation 1999/519/EC, and the ICNIRP and RED Guidelines (Directive 2014/53/EU). During SAR testing, this device was set to transmit at its highest certified power level in all frequency bands tested and placed in positions that simulate RF exposure during use held directly against the head (no gap) and close to the body with a gap of 5 mm. SAR compliance for close-to-body operation is based on there being a 5-mm separation gap between the device and the human body. This device should be carried at least 5 mm away from the body to ensure the RF exposure level is at or lower than the reported level. We recommend using a belt clip or holster that has no metallic components and that maintains a gap of at least 5 mm between the device and the body. No metal-containing accessory worn on the body has been tested or certified as safe for RF exposure, so the use of such an accessory should be avoided. Legal Information This device may be operated in all Member states of the EU. Comply with all local and national regulations of the location in which the device is used. This device is restricted to indoor use only when operating in the 51505350 MHz frequency range in the following countries:

23 AT EE IT PT IS BE BG FI LV RO FR LT SK HR DE SI LI NO CH CY EL ES TR LU MT NL CZ HU DK IE PL SE UK(NI) Ensure the power adapter used meets the requirements of Clause 6.4.5 of IEC/EN 62368-1 and that it has been tested and approved in accordance with local and national standards. Frequency Bands and Power This cell phone offers the following frequency bands in EU areas only and maximum radio-frequency power:

GSM 850: XX dBm GSM 900: 35.5 dBm GSM 1800: 32.5 dBm GSM 1900: XX dBm WCDMA band 1/8: 25.7 dBm LTE band 1/3/7/8/20/28/38/40: 25.7 dBm Bluetooth: 20 dBm 2.4 GHz band Wi-Fi: 20 dBm 5 GHz Wi-Fi: 51505250 MHz: 23 dBm, 52505350 MHz: 20 dBm, 54705725 MHz: 20 dBm, 57255850 MHz: 14 dBm FCC Regulations This cell phone complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. This cell phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference with radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by taking one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Move the equipment further away from the receiver.

- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. 24

- Consult the dealer or an experienced radio/TV technician for help. RF Exposure Information (SAR) This device meets the government's requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to RF energy. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit set by the FCC is 1.6 W/kg. For use with a wearable accessory, this device has been tested and found to comply with the FCC RF exposure guidelines for use with a metal-free accessory that positions the device at least 1.5 cm (5/8 inch) away from the body. No metal-containing accessory worn on the body has been tested or certified as safe for RF exposure, so the use of such an accessory should be avoided. Accessories are commercially available and must be used to maintain a distance of at least 1.5 cm (5/8 inch) between the EUT device and the body. Any changes or modifications that are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Shielded cables must be used with this device to comply with FCC Class B limits. FCC Notice E-label This device has an electronic label for information about certifications. To view this label, go to select Settings > About Phone >

Certification or go to Settings, then type "Certification"

into the search bar. Certification information (highest SAR value) SAR limit 10 g: 2.0 W/kg, SAR: Head: X.XXX W/kg, Body: Y.YYY W/kg (5-mm distance). SAR limit 1 g: 1.6 W/kg, SAR value: Head: A.AAA W/kg, Body: B.BBB W/kg (1.5 cm (5/8 inch)-mm distance). Connection Point: C.CCC W/kg (10-mm distance). Model: 21121119VL 2112 indicates that the product will be launched after 202112. NOM Regulations OPERATION OF THIS DEVICE IS SUBJECT TO THE FOLLOWING CONDITIONS:

a) This equipment or device may not cause harmful interference. b) This equipment or device must accept any interference, including interference that may cause undesired operation. 25 CONNECTION INSTRUCTIONS:

1. To connect your cell phone to electric power and to recharge the internal battery, only use the battery charger that was provided with the equipment. 2. Plug the USB cable into the USB port on your phone. 3. Plug the USB cable into the USB port on your battery charger. 4. Plug the charger into an AC power socket (100240 V~) 5. To disconnect the charger once the battery is charged, hold the charger firmly then remove it from the AC socket. Never pull on the cable. IMEI Location The IMEI is located on a label attached to the back of your device and on the label attached to the box. To view the IMEI of your device, press the "telephone" icon and dial *#06# or go to Settings > About Device > Status > IMEI Information Using FM Radio To use the FM Radio, go to Start > Tools > FM Radio. Headphones must be connected as they function as the antenna. Power: 5.0 V 3.0 A / 9.0 V 2.23 A / 12.0 V 1.67 A /

10.0 V 2.25 A Max 22.5W Max Adapter:

Input: 100 -240 V~, 50 Hz/ 60 Hz, 0.6 A Output: 5.0 V 3.0 A / 9.0 V 2.23 A / 12.0 V 1.67 A /

10.0 V 2.25 A Max 22.5W Max Legal Notice This user guide is published by Xiaomi or its local affiliated company. Xiaomi may, without notice and at any time, make any necessary improvements or changes to typographical errors or inaccuracies of current information found in this user guide, or improvements to programs or equipment. However, such changes will form part of new online editions of this user guide (for more details, please go to www.mi.com/global/service/userguide). All images are for illustrative purposes only and may not accurately represent the actual device. 26 Manufacturer: Xiaomi Communications Co., Ltd. Manufacturer postal address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085 Cell Phone Brand: Redmi All rights reserved by Xiaomi Inc. Model: 21121119VL

Xiaomi Communications Co., Ltd. Request for Confidentiality Date: _2021-10-29_ Subject: Confidentiality Request for: _____ FCC ID: 2AFZZ119VL ______ Pursuant to FCC 47 CRF 0.457(d) and 0.459 the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent*1 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent*

Users Manual

*Note: ______(Insert Explanation as Necessary)______ ______ Xiaomi Communications Co., Ltd._____ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of __180_ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TCB in the event information regarding the product or the product is made available to the public. TCB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, Xiaomi Communications Co., Ltd. By:

shenghao

(Signature/Title2)

(Print name)

Xiaomi Communications Co., Ltd. UNII Declaration Letter We have declared below featured for FCC equipment authorization, device FCC ID: 2AFZZ119VL

(1) DFS Device --

Master, Client without radar detection capability, Client with Radar detection capability , N/A

(2) Active / Passive Scanning , adhoc mode access point capability Frequency Band

(MHz) Active Scanning

(the device can transmit a probe

(beacon)) 2412 2462 MHz 5150 5250 MHz 5250 5350 MHz 5470 5725 MHz 5725 5850 MHz Yes, Yes, Yes, Yes, Yes, No No No No No passive scanning

(where the device is can listen only with no probes) Yes, Yes, Yes, Yes, Yes, No No No No No Ad Hoc Mode capability Access point capability Yes, Yes, Yes, Yes, Yes, No No No No No Yes, Yes, Yes, Yes, Yes, No No No No No

(3) Country code selection ability -

If no, pls explain how was implemented : use Microsoft network utility Yes , No

(4) Meet 15.202 requirement -

pls check below :

Yes , No , A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.

(5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. No Apply , Apply ,

(If apply , pls help to provide explanation on how it was implement (By hardware or software , and how software was controlled) The active or passive mode was controlled by software. For non-DFS frequency used active scanning, for DFS frequency was switched to passive scanning by software Mechanism. If you have any questions, please feel free to contact me at the address shown below. Yours sincerely, Signatory Printed Name: shenghao Position: Certification Director

Xiaomi Communications Co., Ltd. POWER OF ATTORNEY DATE: 10/29/2021 To:

Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 We, the undersigned, hereby authorize TA Technology (Shanghai) Co., Ltd.

/Liu Mengting on our behalf, to apply to FCC on our equipment for FCC ID:

2AFZZ119VL. Any and all acts carried out by TA Technology (Shanghai) Co., Ltd. / Liu Mengting on our behalf shall have the same effect as acts of our own. Sincerely, Signature:

Print name: shenghao Company: Xiaomi Communications Co., Ltd.

Xiaomi Communications Co., Ltd. WIFI Declaration DATE: October 29, 2021 To:

Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 We, Xiaomi Communications Co., Ltd. declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. FCC ID: 2AFZZ119VL. If you should have any question(s) regarding this declaration, please dont hesitate to contact us. Thank you!

Sincerely, Print name: Sheng hao Company: Xiaomi Communications Co., Ltd.