Xiaomi Pad 5 Quick Start Guide Microphone Power Button Speaker Speaker 02 48 SAT. 16 AUG. Volume Buttons Xiaomi Smart Pen Charger Xiaomi Keyboard Connector Speaker Speaker Microphone USB Type-C Port Thank you for choosing Xiaomi Pad 5 Long press the power button to turn on the device. Follow the on-screen instructions to configure the device. For more information, visit our official website:
www.mi.com/global/service/userguide Xiaomi Pad 5 comes pre-installed with MIUI, our customized Android-based OS which provides frequent updates and user-friendly features based on suggestions from over 200 million active users worldwide. For more information, please visit en.miui.com MIUI WEEE Special precautions must be taken to safely dispose of this product. This marking indicates that this product may not be discarded with other household waste in the EU. To prevent harm to the environment or human health from inappropriate waste disposal, and to promote sustainable reuse of material resources, please recycle responsibly. To safely recycle your device, please use return and collection systems or contact the retailer where the device was originally purchased. To view our Environmental Declaration, please refer to the following link:
www.mi.com/en/about/environment CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS. To prevent possible hearing damage, do not listen at high volume levels for long periods. Additional safety information and precautions can be accessed at the following link: www.mi.com/en/certification Important Safety Information Read all safety information below before using your device:
Use of unauthorized cables, power adapters, or batteries can cause fire, explosion, or pose other risks. Use only authorized accessories which are compatible with your device. This devices operating temperature range is 0C to 40C. Using this device in an environment outside of this temperature range may damage the device. If your device is provided with a built-in battery, to avoid damaging the battery or the device, do not attempt to replace the battery yourself. Charge this device only with the included or authorized cable and power adapter. Using other adapters may cause fire, electric shock, and damage the device and the adapter. After charging is complete, disconnect the adapter from both the device and the power outlet. Do not charge the device for more than 12 hours. The battery must be recycled or disposed of separately from household waste. Mishandling the battery may cause fire or explosion. Dispose of or recycle the device, its battery, and accessories according to your local regulations. Do not disassemble, hit, crush, or burn the battery. If the battery appears deformed or damaged, stop using it immediately.
- Do not short circuit the battery, as this may cause overheating, burns, or other injury.
- Do not place the battery in a high-temperature environment.
- Overheating may cause explosion.
- Do not disassemble, hit, or crush the battery, as this may cause the battery to leak, overheat, or explode.
- Do not burn the battery, as this may cause fire or explosion.
- If the battery appears deformed or damaged, stop using it immediately. User shall not remove or alter the battery. Removal or repair of the battery shall only be done by an authorized repair center of the manufacturer. Keep your device dry. Do not try to repair the device yourself. If any part of the device does not work properly, contact Mi customer support or bring your device to an authorized repair center. Connect other devices according to their instruction manuals. Do not connect incompatible devices to this device. For AC/DC adapters, the socket-outlet shall be installed near the equipment and shall be easily accessible. Safety Precautions Observe all applicable laws and rules restricting use of tablet in specific situations and environments. Do not use your tablet at petrol stations or in any explosive atmosphere or potentially explosive environment, including fueling areas, below decks on boats, fuel or chemical transfer or storage facilities, or areas where the air may contain chemicals or particles such as grain, dust, or metal powders. Obey all posted signs to turn off wireless devices such as your tablet or other radio equipment. Turn off your tablet or wireless device when in a blasting area or in areas requiring two-way radios or electronic devices to be turned off to prevent potential hazards. Do not use your tablet in hospital operating rooms, emergency rooms, or intensive care units. Always comply with all rules and regulations of hospitals and health centers. If you have a medical device, please consult your doctor and the device manufacturer to determine whether your tablet may interfere with the devices operation. To avoid potential interference with a pacemaker, always maintain a minimum distance of 15 cm between your tablet and the pacemaker. To avoid interference with medical equipment, do not use your tablet near hearing aids, cochlear implants, or other similar devices. Observe all aircraft safety regulations and turn off your tablet on board When driving a vehicle, use your tablet in accordance with relevant traffic To avoid being struck by lightning, do not use your tablet outdoors during aircraft when required. laws and regulations. thunderstorms. Do not use your tablet in places with high humidity, such as bathrooms. Doing so may result in electric shock, injury, fire, and charger damage. Security Statement Please update your tablets operating system using the built-in software update feature, or visit any of our authorized service outlets. Updating software through other means may damage the device or result in data loss, security issues, and other risks. EU Regulations RED Declaration of Conformity Xiaomi Communications Co., Ltd. hereby declares that this Tablet with Bluetooth and Wi-Fi 21051182G is in compliance with the essential requirements and other relevant provisions of the RE Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.mi.com/en/certification RF Exposure Information (SAR) This device is in compliance with Specific Absorption Rate (SAR) limits for general population/uncontrolled exposure (Localized 10-gram SAR for trunk, limit: 2.0W/kg) specified in Council Recommendation 1999/519/EC, ICNIRP Guidelines, and RED (Directive 2014/53/EU). During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands. When attaching the device near the body, a belt clip or holster should be used which does not contain metallic components. RF exposure compliance was not tested or certified with any accessory containing metal worn on the body, and use of such an accessory should be avoided. Certification Information (Highest SAR) SAR 10 g limit: 2.0 W/Kg, SAR Value: Body: 0.350 W/Kg (0 mm distance). Legal Information This device may be operated in all member states of the EU. Observe national and local regulations where the device is used. This device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range in Hong Kong and the following countries:
AT EE IT PT IS BE BG FI LV RO FR LT SK HR DE SI LI NO CH CY EL ES TR LU MT NL CZ HU DK IE PL SE UK(NI) Restrictions in the 2.4 GHz band:
Norway: This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-lesund. Receiver Category 2 Ensure the power adapter used meets the requirements of Clause 6.4.5 in IEC/EN 62368-1 and has been tested and approved according to national or local standards. Frequency Bands and Power This tablet offers the following frequency bands in EU areas only and maximum radio-frequency power:
Bluetooth: 20 dBm Wi-Fi 2.4 GHz band: 20 dBm Wi-Fi 5 GHz: 5150 to 5250MHz: 23 dBm, 5250 to 5350 MHz: 20 dBm, 5470 to 5725 MHz: 20 dBm, 5725 to 5850 MHz: 14 dBm Wireless reverse charging: 145 KHz < 42 dBuA/m at 10m Distance FCC Regulations This tablet complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This tablet has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. RF Exposure Information (SAR) This device meets the governments requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy. The exposure standard for wireless devices employs a unit of measurement known as Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/Kg. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal. RF exposure compliance with any body-
worn accessory that contains metal was not tested and certified, and use of such body-worn accessory should be avoided. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits. FCC Note UK Regulations Regulations 2017 (SI 2017/1206) Declaration of Conformity Xiaomi Communications Co., Ltd. hereby declares that this Tablet with Bluetooth and Wi-Fi 21051182G is in compliance with the essential requirements and other relevant provisions of the UK Radio Equipment Regulations 2017 (SI 2017/1206). The full text of the UK declaration of conformity is available at the following internet address:
www.mi.com/en/certification RF Exposure Information (SAR) This device is in compliance with Specific Absorption Rate (SAR) limits for general population/uncontrolled exposure (Localized 10-gram SAR for trunk, limit: 2.0W/kg) specified in Council Recommendation 1999/519/EC, ICNIRP Guidelines, and UK Radio Equipment Regulations 2017 (SI 2017/1206). During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands. When attaching the device near the body, a belt clip or holster should be used which does not contain metallic components. RF exposure compliance was not tested or certified with any accessory containing metal worn on the body, and use of such an accessory should be avoided. Certification Information (Highest SAR) SAR 10 g limit: 2.0 W/Kg, SAR Value: Body: 0.350 W/Kg (0 mm distance). Legal Information Observe national and local regulations where the device is used. This device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range in Hong Kong and UK:
UK Receiver Category 2 Ensure the power adapter used meets the requirements of Clause 6.4.5 in IEC/EN 62368-1 and has been tested and approved according to national or local standards. Frequency Bands and Power This tablet offers the following frequency bands in EU areas only and maximum radio-frequency power:
Bluetooth: 20 dBm Wi-Fi 2.4 GHz band: 20 dBm Wi-Fi 5 GHz: 5150 to 5250MHz: 23 dBm, 5250 to 5350 MHz: 20 dBm, 5470 to 5725 MHz: 20 dBm, 5725 to 5850 MHz: 14 dBm Wireless reverse charging: 145 KHz < 42 dBuA/m at 10m Distance E-label This device has an electronic label for certification information. To access it, please go to Settings > About tablet > Certification, or open Settings and type Certification into the search bar. Model: 21051182G 2105 indicates that this product will be launched after 202105. When using this device as a wireless charger it is intended for use as a desktop device and should not be carried when in this mode. To comply with RF exposure requirements when using in the wireless charging mode please place the device at a minimum distance of 20cm from persons. Disclaimer This quick start guide is published by Xiaomi or its local affiliated company. Improvements and changes to this guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Xiaomi at any time and without notice. Such changes will, however, be incorporated into new online editions of the quick start guide (please see details at www.mi.com/global/service/userguide). All illustrations are for illustration purposes only and may not accurately depict the actual device. Manufacturer: Xiaomi Communications Co., Ltd. Manufacturer postal address:
#019, 9th Floor, Building 6, 33 Xierqi Middle Road, Haidian District, Beijing, China, 100085 Brand: Xiaomi Model: 21051182G Xiaomi Inc. All rights reserved. Xiaomi Pad 5 02 48
!8 16 Xiaomi Smart Pen Xiaomi Keyboard USB Type-C Xiaomi Pad 5
www.mi.com/global/service/userguide MIUI Xiaomi Pad 5 MIUI Android 2 en.miui.com WEEE
www.mi.com/en/about/environment www.mi.com/en/certication 0C 40C
12
Mi
15 RED Xiaomi Communications Co., Ltd. Wi-Fi 21051182G 2014/53/EU www.mi.com/en/certication
(SAR)
/ (SAR) 10 SAR2.0W/kg 1999/519/ECICNIRP RED2014/53/EU SAR SAR SAR 10 2.0 W/Kg SAR 0.350 W/Kg0
/ 5150 5350 MHz AT EE IT PT IS BE BG FI LV RO FR LT SK HR DE SI LI NO CH CY EL ES TR LU MT NL CZ HU DK IE PL SE UK(NI) 2.4 GHz 20 2 IEC/EN 62368-1 6.4.5 20 dBm Wi-Fi 2.4 GHz 20 dBm Wi-Fi 5 GHz5150 5250MHz23 dBm5250 5350 MHz20 dBm 5470 5725 MHz20 dBm5725 5850 MHz14 dBm 145 KHz10 42 dBuA/m FCC FCC 15
(1) (2) FCC 15 B
(SAR)
(RF)
(SAR) FCC SAR 1.6 W/Kg FCC FCC B FCC
21051182G 2105 202105 20 Xiaomi
Xiaomi www.mi.com/global/service/userguide Xiaomi Communications Co., Ltd.
#019, 9th Floor, Building 6, 33 Xierqi Middle Road, Haidian District, Being, China, 100085 Xiaomi 21051182G Xiaomi Inc. B
21051182G :
.202105 2105
. 20
. Xiaomi
. Xiaomi /
.)www.mi.com/global/service/userguide (
. Xiaomi Communications Co., Ltd. :
#019, 9th Floor, Building 6, 33 Xierqi Middle Road, Haidian District, Beijing, China, 100085 Xiaomi :
. Xiaomi Inc. 21051182G :
20 :
20 : 2,4 ) (
: 5250 5150 : 5 ) (
5470 20 : 5350 5250 23 14 : 5850 5725 20 : 5725 10 42 < 145 :
. 15
)2( )1( :
. B
. 15
. SAR
./ 1,6
)/ 2,0 : 10 (
) 1999/519/EC (
.) 2014/53/EU (
/ 2,0 : 10
.) 0 ( / 0,350 : :
: 5350 5150 CZ HU DK IE PL UK(NI) SE NL MT CY EL ES TR HR BG BE DE LU SI FR LT SK FI LV RO CH NO LI AT EE IT PT IS
: 2,4 20 :
. 2 IEC/EN 62368-1 6.4.5
. . 15
. Xiaomi Communications Co., Ltd. 21051182G ) (
.) 2014/53/EU www.mi.com/en/certification :
. 40 0
. 12
. Mi
. Xiaomi Pad 5
www.mi.com/global/service/userguide MIUI Xiaomi Pad 5 Android en.miui.com . 200 MIUI
. www.mi.com/en/about/environment :
www.mi.com/en/certification 16 Xiaomi Xiaomi Smart Pen C USB Xiaomi Pad 5
/item no: XXXXXXXXXX**
/version: A K82 + +
Material description K82 Quick Start Guide UK SKU version
/artwork issue date2021.07.05
/Paper use of user guide:
80g / 80 g C2S(coated two side) matt art paper
/water-base matt varnish on front/back side
/Side
/folding65X120mm
/Printing requirement PANTONE Cool Gray 11C
/blinding
/Horseback tack
/Other special precautions
/Please print the part number according to the regulations and check carefully 1Datamatrix /Datamatrix size6X6mm 2 /The scan code display format XXXXXXXXXXXXA