FCC ID: 2AFZZ283G Tablet Computer with Bluetooth and WiFi

Redmi Pad Quick Start Guide Volume Buttons Power SD Card Tray 02 48 SAT. 16 AUG. USB Type-C Port Thank you for choosing Redmi Pad Long press the power button to turn on the device. Follow the on-screen instructions to configure the device. For more information, visit our official website:

www.mi.com/global/service/userguide MIUI Redmi Pad comes pre-installed with MIUI, our customized Android-based OS which provides frequent updates and user-friendly features based on suggestions from over 200 million active users worldwide. For more information, please visit en.miui.com WEEE Special precautions must be taken to safely dispose of this product. This marking indicates that this product may not be discarded with other household waste in the EU. To prevent harm to the environment or human health from inappropriate waste disposal, and to promote sustainable reuse of material resources, please recycle responsibly. To safely recycle your device, please use return and collection systems or contact the retailer where the device was originally purchased. To view our Environmental Declaration, please refer to the following link:

www.mi.com/en/about/environment CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS. To prevent possible hearing damage, do not listen at high volume levels for long periods. Additional safety information and precautions can be accessed at the following link: www.mi.com/en/certification Important Safety Information Read all safety information below before using your device:

Use of unauthorized cables, power adapters, or batteries can cause fire, explosion, or pose other risks. Use only authorized accessories which are compatible with your device. This devices operating temperature range is 0C to 40C. Using this device in an environment outside of this temperature range may damage the device. If your device is provided with a built-in battery, to avoid damaging the battery or the device, do not attempt to replace the battery yourself. Charge this device only with the included or authorized cable and power adapter. Using other adapters may cause fire, electric shock, and damage the device and the adapter. After charging is complete, disconnect the adapter from both the device and the power outlet. Do not charge the device for more than 12 hours. The battery must be recycled or disposed of separately from household waste. Mishandling the battery may cause fire or explosion. Dispose of or recycle the device, its battery, and accessories according to your local regulations. Do not disassemble, hit, crush, or burn the battery. If the battery appears deformed or damaged, stop using it immediately.

- Do not short circuit the battery, as this may cause overheating, burns, or other injury.

- Do not place the battery in a high-temperature environment.

- Overheating may cause explosion.

- Do not disassemble, hit, or crush the battery, as this may cause the battery to leak, overheat, or explode.

- Do not burn the battery, as this may cause fire or explosion.

- If the battery appears deformed or damaged, stop using it immediately. User shall not remove or alter the battery. Removal or repair of the battery shall only be done by an authorized repair center of the manufacturer. Keep your device dry. Do not try to repair the device yourself. If any part of the device does not work properly, contact Mi customer support or bring your device to an authorized repair center. Connect other devices according to their instruction manuals. Do not connect incompatible devices to this device. For AC/DC adapters, the socket-outlet shall be installed near the equipment and shall be easily accessible. Safety Precautions Observe all applicable laws and rules restricting use of tablet in specific situations and environments. Do not use your tablet at petrol stations or in any explosive atmosphere or potentially explosive environment, including fueling areas, below decks on boats, fuel or chemical transfer or storage facilities, or areas where the air may contain chemicals or particles such as grain, dust, or metal powders. Obey all posted signs to turn off wireless devices such as your tablet or other radio equipment. Turn off your tablet or wireless device when in a blasting area or in areas requiring two-way radios or electronic devices to be turned off to prevent potential hazards. Do not use your tablet in hospital operating rooms, emergency rooms, or intensive care units. Always comply with all rules and regulations of hospitals and health centers. If you have a medical device, please consult your doctor and the device manufacturer to determine whether your tablet may interfere with the devices operation. To avoid potential interference with a pacemaker, always maintain a minimum distance of 15 cm between your tablet and the pacemaker. To avoid interference with medical equipment, do not use your tablet near hearing aids, cochlear implants, or other similar devices. Observe all aircraft safety regulations and turn off your tablet on board aircraft when required. When driving a vehicle, use your tablet in accordance with relevant traffic laws and regulations. To avoid being struck by lightning, do not use your tablet outdoors during thunderstorms. Do not use your tablet in places with high humidity, such as bathrooms. Doing so may result in electric shock, injury, fire, and charger damage. Security Statement Please update your tablets operating system using the built-in software update feature, or visit any of our authorized service outlets. Updating software through other means may damage the device or result in data loss, security issues, and other risks. EU Regulations RED Declaration of Conformity Xiaomi Communications Co., Ltd. hereby declares that this Tablet with Bluetooth and Wi-Fi 22081283G is in compliance with the essential requirements and other relevant provisions of the RE Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.mi.com/en/certification RF Exposure Information (SAR) This device is in compliance with Specific Absorption Rate (SAR) limits for general population/uncontrolled exposure (Localized 10-gram SAR for trunk, limit: 2.0W/kg) specified in Council Recommendation 1999/519/EC, ICNIRP Guidelines, and RED (Directive 2014/53/EU). During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands. When attaching the device near the body, a belt clip or holster should be used which does not contain metallic components. RF exposure compliance was not tested or certified with any accessory containing metal worn on the body, and use of such an accessory should be avoided. Certification Information (Highest SAR) SAR 10 g limit: 2.0 W/Kg, SAR Value: Body: 0.356 W/Kg (0 mm distance). Legal Information This device may be operated in all member states of the EU. Observe national and local regulations where the device is used. This device is restricted to indoor use only when operating in the 5250 to 5350 MHz frequency range in: AT,BE,BG,HR,CY,CZ,DK,EE,FI,FR,DE,EL,HU, IE,IT,LV,LT,LU,MT,NL,PL,PT,RO,SK,SI,ES,SE,UK(NI),IS,LI,NO,CH,TR This device is restricted to indoor use only when operating in the 5150 to 5350MHz in Hong Kong. Restrictions in the 2.4 GHz band:

Norway: This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-lesund. Ensure the power adapter used meets the requirements of Clause 6.4.5 in IEC/EN 62368-1 and has been tested and approved according to national or local standards. Frequency Bands and Power This tablet offers the following frequency bands in EU areas only and maximum radio-frequency power:

Bluetooth: 20 dBm Wi-Fi 2.4 GHz band: 20 dBm Wi-Fi 5 GHz: 5150 to 5250MHz: 23 dBm, 5250 to 5350 MHz: 20 dBm, 5470 to 5725 MHz: 20 dBm, 5725 to 5850 MHz: 14 dBm FCC Regulations This tablet complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This tablet has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. RF Exposure Information (SAR) This device meets the governments requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy. The exposure standard for wireless devices employs a unit of measurement known as Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/Kg. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal. RF exposure compliance with any body-

worn accessory that contains metal was not tested and certified, and use of such body-worn accessory should be avoided. FCC Note Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits. UK Regulations Regulations 2017 (SI 2017/1206) Declaration of Conformity Xiaomi Communications Co., Ltd. hereby declares that this Tablet with Bluetooth and Wi-Fi 22081283G is in compliance with the essential requirements and other relevant provisions of the UK Radio Equipment Regulations 2017 (SI 2017/1206). The full text of the UK declaration of conformity is available at the following internet address:

www.mi.com/en/certification RF Exposure Information (SAR) This device is in compliance with Specific Absorption Rate (SAR) limits for general population/uncontrolled exposure (Localized 10-gram SAR for trunk, limit: 2.0W/kg) specified in Council Recommendation 1999/519/EC, ICNIRP Guidelines, and UK Radio Equipment Regulations 2017 (SI 2017/1206). During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands. When attaching the device near the body, a belt clip or holster should be used which does not contain metallic components. RF exposure compliance was not tested or certified with any accessory containing metal worn on the body, and use of such an accessory should be avoided. Certification Information (Highest SAR) SAR 10 g limit: 2.0 W/Kg, SAR Value: Body: 0.356 W/Kg (0 mm distance). Legal Information Observe national and local regulations where the device is used. This device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range in:

UK This device is restricted to indoor use only when operating in the 5150 to 5350MHz in Hong Kong. Ensure the power adapter used meets the requirements of Clause 6.4.5 in IEC/EN 62368-1 and has been tested and approved according to national or local standards. Frequency Bands and Power This tablet offers the following frequency bands in EU areas only and maximum radio-frequency power:

Bluetooth: 20 dBm Wi-Fi 2.4 GHz band: 20 dBm Wi-Fi 5 GHz: 5150 to 5250MHz: 23 dBm, 5250 to 5350 MHz: 20 dBm, 5470 to 5725 MHz: 20 dBm, 5725 to 5850 MHz: 14 dBm E-label This device has an electronic label for certification information. To access it, please go to Settings > About tablet > Certification, or open Settings and type Certification into the search bar Model: 22081283G 2208 indicates that this product will be launched after 202208. Disclaimer This quick start guide is published by Xiaomi or its local affiliated company. Improvements and changes to this guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Xiaomi at any time and without notice. Such changes will, however, be incorporated into new online editions of the quick start guide (please see details at www.mi.com/global/service/userguide). All illustrations are for illustration purposes only and may not accurately depict the actual device. Manufacturers Authorized UK Representative Name: Xiaomi Technology UK Limited Address: Part Ground Floor, North Wing, 100 Brook Drive, Green Park, Reading Manufacturer: Xiaomi Communications Co., Ltd. Manufacturer postal address:

#019, 9th Floor, Building 6, 33 Xierqi Middle Road, Haidian District, Beijing, China, 100085 Brand: Redmi Xiaomi Inc. All rights reserved. Model: 22081283G Redmi Pad 02 48

!8 16 USB Type-C Redmi Pad

www.mi.com/global/service/userguide MIUI Redmi Pad MIUI Android 2 en.miui.com WEEE

www.mi.com/en/about/environment www.mi.com/en/certication 0C 40C

12

Mi

15 RED Xiaomi Communications Co., Ltd. Wi-Fi 22081283G 2014/53/EU www.mi.com/en/certication

(SAR)

/ (SAR) 10 SAR2.0W/kg 1999/519/ECICNIRP RED2014/53/EU SAR SAR SAR 10 2.0 W/Kg SAR 0.356 W/Kg0 5250 5350 MHz AT,BE,BG, HR,CY,CZ,DK,EE,FI,FR,DE,EL,HU,IE,IT,LV,LT,LU,MT,NL,PL,PT,RO,SK,SI,ES,SE, UK(NI),IS,LI,NO,CH,TR 51505350MHz 2.4 GHz 20 IEC/EN 62368-1 6.4.5 20 dBm Wi-Fi 2.4 GHz 20 dBm Wi-Fi 5 GHz5150 5250MHz23 dBm5250 5350 MHz20 dBm 5470 5725 MHz20 dBm5725 5850 MHz14 dBm FCC FCC 15

(1) (2) FCC 15 B

(SAR)

(RF)

(SAR) FCC SAR 1.6 W/Kg FCC FCC B FCC

22081283G 2208 202208 Xiaomi

Xiaomi www.mi.com/global/service/userguide Xiaomi Communications Co., Ltd.

#019, 9th Floor, Building 6, 33 Xierqi Middle Road, Haidian District, Being, China, 100085 Redmi 22081283G Xiaomi Inc. Xiaomi Communications Co., Ltd. :

#019, 9th Floor, Building 6, 33 Xierqi Middle Road, Haidian District, Beijing, China, 100085 Redmi :

. Xiaomi Inc. 22081283G :

. SAR

./ 1,6

. B

22081283G :

.202208 2208

. Xiaomi

. Xiaomi /

.)www.mi.com/global/service/userguide (

/ 2,0 : 10

.) 0 ( / 0,356 : :

. 5350 5250

, , , , , ) 5350 5150

: 2,4 20 :

. IEC/EN 62368-1 6.4.5

20 :

20 : 2,4 ) (

: 5250 5150 : 5 ) (

5470 20 : 5350 5250 23 14 : 5850 5725 20 : 5725

. 15

)2( )1( :

. B

. 15

. . 15

. Xiaomi Communications Co., Ltd. 22081283G ) (

.) 2014/53/EU www.mi.com/en/certification :

)/ 2,0 : 10 (

) 1999/519/EC (

.) 2014/53/EU (

www.mi.com/en/certification

. 40 0

. 12

. Mi

. SD 02 48 16 C USB Redmi Pad

www.mi.com/global/service/userguide MIUI MIUI Redmi Pad Android en.miui.com . 200

. www.mi.com/en/about/environment :

. Redmi Pad

/item no: XXXXXXXXXX**

/version: A

Material description XX Quick Start Guide UK SKU version

/artwork issue dateYYYY.MM.DD

/Paper use of user guide:

80g / 80 g C2S(coated two side) matt art paper

/water-base matt varnish on front/back side

/Side

/folding65X120mm

/Printing requirement PANTONE Cool Gray 11C

/blinding

/Horseback tack

/Other special precautions

/Please print the part number according to the regulations and check carefully 1Datamatrix /Datamatrix size6X6mm 2 /The scan code display format XXXXXXXXXXXXA

Xiaomi Communications Co., Ltd.

#019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China Tel: 010 6060 6666 ; Fax: 010 6060 6666 Date: August 1, 2022 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidentiality FCC ID: 2AFZZ283G To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commissions rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. Operational Description Tune-up Procedure Schematic Diagram Block Diagram Part List Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission s policy, in order to comply with the marketing regulations in 47 CFT 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, ____ Zengqingyao mi-compliance@xiaomi.com

RF_160, Issue 04 Xiaomi Communications Co., Ltd.

#019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd South of No. 6 Plant, No. 1, Runsheng Road, Suzhou Industrial Xiaomi Communications Co., Ltd. Declaration of Authorization We Name:

Address:

China Beijing China City:

Country:

Declare that:

Name Representative of agent: Well Wei Agent Company name:

Branch Address:

Park, Suzhou Area, China (Jiangsu) Pilot Free Trade Zone City:

Country is authorized to apply for Certification of the following product(s):

Product description: Tablet Computer Type designation:

Trademark: Redmi FCC ID:

on our behalf. Suzhou China 2AFZZ283G 22081283G Sincerely yours, Contact Person: Zengqingyao Applicant: Xiaomi Communications Co., Ltd. Phone: 010-60606666-8088 E-Mail: mi-compliance@xiaomi.com Notes:

(1): Required for FCC application

(2): For FCC it must be the Grantee Code owner or the authorized agent.

Xiaomi Communications Co.,Ltd

#019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China UNII Declaration Letter We have declared below featured for FCC equipment authorization, device FCC ID:2AFZZ283G

(1) DFS Device --

Master, Client with Radar detection capability , N/A Client without radar detection capability,

(2) Active / Passive Scanning , adhoc mode access point capability Frequency Band

(MHz) Active Scanning

(the device can transmit a probe

(beacon)) passive scanning

(where the device is can listen only with no probes) Ad Hoc Mode capability Access point capability 2412 2462 MHz Yes, 2422 2452 MHz Yes, 5745 5825 MHz Yes, 5755 5795 MHz Yes, 5180 5240 MHz Yes, 5190 5230 MHz Yes, 5260 5320 MHz 5270 5310 MHz No Yes, No Yes, No Yes, No Yes, No Yes, No Yes, Yes, No Yes, Yes, No Yes, 5500 5700 MHz Yes, No Yes, Yes, No Yes, 5510 5670 MHz No Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No No No No No No No No No No Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No

(3) Country code selection ability -

If no, pls explain how was implemented : use Microsoft network utility

(4) Meet 15.202 requirement - Yes , pls check below :

Yes , No No , A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.

(5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply , No Apply ,

(If apply , pls help to provide explanation on how it was implement (By hardware or software , and how software was controlled) If you have any questions, please feel free to contact me at the address shown below. Yours sincerely, Signatory Xiaomi Communications Co., Ltd. Printed Name:Zengqingyao PositionCertification Director