FCC ID: UZ7RM520NGL 5G Sub-6 GHz M.2 Module

Label info Label location & Label sample Top of the device RM520N-GL FCC ID: UZ7RM520NGL IC: 109AN-RM520NGL

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6956974.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Regulatory Engineering Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: February 17, 2023 Ref: Attestation Statements Part 2.911(d)(7) Filing Grantee Code: UZ7 Zebra Technologies Corporation (the applicant) certifies that, as of the date of the filing of the application, [Zebra Technologies Corporation] is our designated U.S. agent for service of process for the above referenced grantee code. Zebra Technologies Corporation accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes.

[Zebra Technologies Corporation] accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced grantee code. Designated U.S. Agent Information:

Name: Zebra Technologies Corporation FRN: 0015642663 Address: 1 Zebra Plaza, Holtsville, New York, United States, 11742 Contact Person: Larry (Qianlin) Zhou Tel.: 346-260-3543 Email: Larry.Zhou@zebra.com Sincerely, Applicant Zebra Technologies Corporation Larry (Qianlin) Zhou U.S. Agent Zebra Technologies Corporation Larry (Qianlin) Zhou Zebra Technologies Corporation 1 Z e b r a P l a z a , | H o l t s v i l l e , N Y 1 1 7 4 2 | 1 . 6 3 1 . 7 3 8 . 2 4 0 0 p h o n e | 1 . 6 3 1 . 6 2 7 . 7 1 7 9 f a x | w w w . z e b r a . c o m

Regulatory Engineering Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: April 1, 2024 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: UZ7RM520NGL

[Zebra Technologies Corporation] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature

_______________________________ Name and Job Title. E-mail Tel.

: Larry (Qianlin) Zhou / Regulatory Specialist

: larry.zhou@zebra.com

: 346-260-3543 Zebra Technologies Corporation 1 Z e b r a P l a z a , | H o l t s v i l l e , N Y 1 1 7 4 2 | 1 . 6 3 1 . 7 3 8 . 2 4 0 0 p h o n e | 1 . 6 3 1 . 6 2 7 . 7 1 7 9 f a x | w w w . z e b r a . c o m Regulatory Engineering Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: April 1, 2024 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: UZ7RM520NGL

[Zebra Technologies Corporation] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Sincerely, Signature

_______________________________ Name and Job Title. E-mail Tel.

: Larry (Qianlin) Zhou / Regulatory Specialist

: larry.zhou@zebra.com

: 346-260-3543 Zebra Technologies Corporation 1 Z e b r a P l a z a , | H o l t s v i l l e , N Y 1 1 7 4 2 | 1 . 6 3 1 . 7 3 8 . 2 4 0 0 p h o n e | 1 . 6 3 1 . 6 2 7 . 7 1 7 9 f a x | w w w . z e b r a . c o m

Date: April 1, 2024 Regulatory Engineering FCC Laboratory 7435 Oakland Mills Rd Columbia MD 21046 To whom it may concern, This Change of Identification request applies for a new FCC ID as established in 47 CFR 2.933 for a currently approved device. This application by Zebra Technologies Corporation will establish a new FCC ID: UZ7RM520NGL under Zebra Technologies Corporation grantee code for the purpose of marketing. The original grant to Quectel Wireless Solutions Company Limited will remain in effect. Per 2.933(b) 1. The original identification is XMR2022RM520NGL. 2. The original grant date is 08/31/2022. 3. The equipment is electrically identical. Only the trade name, and FCC ID number are different. 4. The original test results continue to be representative of and applicable to the equipment bearing the changed identification. 5. Exterior photographs are included in this application. The following files are electronically submitted as attachments:

Should there be any question, please feel free to contact us. Sincerely yours, Cover Letter External Photos FCC ID label format and location Signature

_______________________________ Name and Job Title. E-mail Tel.

: Larry (Qianlin) Zhou / Regulatory Specialist

: larry.zhou@zebra.com

: 346-260-3543 Zebra Technologies Corporation 1 Zeb ra Pl a z a, | Hol t s vi ll e, NY 11 74 2 | 1.631. 738 .240 0 p hone | 1 .6 31 . 62 7. 71 79 fax | www.z e br a.c om

Regulatory Engineering Date: March 22, 2024 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: FCC ID: UZ7RM520NGL AUTHORIZATION LETTER We, the undersigned, hereby authorize Jones Tsai in Sporton International Inc. to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Jones Tsai in Sporton International Inc. on our behalf shall have the same effect as acts of our own. If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Confidentiality Request Pursuant to Public Notice DA 04-1705 of the Commission s policy, in order to comply with the marketing regulations in 47 CFT 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant shot-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. External Photos It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. If you have any questions regarding this authorization, please contact me directly. Zebra Technologies Corporation 1 Z e b r a P l a z a , | H o l t s v i l l e , N Y 1 1 7 4 2 | 1 . 6 3 1 . 7 3 8 . 2 4 0 0 p h o n e | 1 . 6 3 1 . 6 2 7 . 7 1 7 9 f a x | w w w . z e b r a . c o m Signature

Regulatory Engineering _______________________________ Name and Job Title. E-mail Tel.

: Larry (Qianlin) Zhou / Regulatory Specialist

: larry.zhou@zebra.com

: 346-260-3543 Zebra Technologies Corporation 1 Z e b r a P l a z a , | H o l t s v i l l e , N Y 1 1 7 4 2 | 1 . 6 3 1 . 7 3 8 . 2 4 0 0 p h o n e | 1 . 6 3 1 . 6 2 7 . 7 1 7 9 f a x | w w w . z e b r a . c o m

Date: March 22, 2024 Regulatory Engineering Module Approval Checklist FCC ID: UZ7RM520NGL Requirements EUT Item 1. The radio elements must have the radio The module is equipped with its own shielding case. frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly 2. The module must have buffered The module has buffer modulation / data inputs. modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal 3. The module must contain power supply The module has its own power supply regulation. regulation on the module 4. The module must contain a permanently Not applicable to licensed modules. attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b) 5. The module must demonstrate compliance in a stand-alone configuration 6. The module must be labeled with its permanently affixed FCC ID label, or use an electronic display 7. The module must comply with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee 8. The module must comply with RF exposure requirements The module was tested on evaluation board, and its not inside of another device during testing The module transmitter will be labeled with its own FCC ID, and for OEM integration the integration manual contains labeling instructions for the host device per Part 15.212 (vi) The module approved transmitter complies with all applicable rules and the integration manual contains any specific requirements addressed to the integrator and/or to the end-user of the final end-product. The modular transmitter complies with RF exposure requirement. Signature

Regulatory Engineering _______________________________ Name and Job Title. E-mail Tel.

: Larry (Qianlin) Zhou / Regulatory Specialist

: larry.zhou@zebra.com

: 346-260-3543

Quectel Wireless Solutions Company Limited Building 5, Shanghai Business Park PhaseIII, (Area B),No.1016 Tianlin Road, Minhang District, Shanghai 200233, China Tel: +8602150086326, Fax: +862153253668 Date: April 2, 2024 FCC Laboratory 7435 Oakland Mills Rd Columbia MD 21046 To whom it may concern, This letter grants authorization for representatives of Zebra Technologies Corporation to apply to the FCC for a change in identification as specified under 47 CFR 2.933 of the FCC rules. This authorization applies to Quectel 5G Sub-6 GHz M.2 Module, FCC ID: XMR2022RM520NGL, original grant date 08/31/2022. We are aware that Zebra Technologies Corporation intends to market the above referred product under FCC ID: UZ7RM520NGL. The original test results continue to be representative of and applicable to the equipment bearing the changed identification. Should there be any question, please feel free to contact us. Sincerely yours, Jean Hu certification@quectel.com