1. Regulatory Information For devices with Symbol, or Symbol Technologies Inc., etc. on the Manufacturing Label and for devices manufactured at Reynosa, or any other Zebra factory facilities:
This device is approved under Zebra Technologies Corporation. This guide applies to Model Number : CDRDB All Zebra devices are designed to be compliant with the rules and regulations in the locations they are sold and will be labeled as required. Local language translations are available at the following website: www.zebra.com/support. Any changes or modifications to Zebra equipment not expressly approved by Zebra could void the users authority to operate the equipment. Zebra devices are professionally installed the Radio Frequency Output Power will not exceed the maximum allowable limit for the country of operation. Antennas: Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could cause damage and may violate regulations. This device is only to be used with a Zebra Wireless Switch. For use only with Zebra approved and UL Listed mobile computers, Zebra approved, and UL Listed/Recognized battery packs 2. Wireless Device Country Approvals Note: This section is only applicable to WW/WR/EU configurations. Regulatory markings subject to certification are applied to the device signifying the radio(s) is/are approved for use in the following countries and continents: United States, Canada, Japan, China, South Korea, Australia, and Europe. Please refer to the Declaration of Conformity (DoC) for details of other country markings. This is available at:
http://www.zebra.com/doc. Note: Europe includes Austria, Belgium, Bulgaria, Croatia, Czech Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, and the United Kingdom. Caution: Operation of the device without regulatory approval is illegal. Country Selection Select only the country in which the device will be used. Any other selection will make the operation of this device illegal. Country Roaming This device incorporates the International Roaming feature (IEEE802.11d), which will ensure the product operates on the correct channels for the particular country of use. Frequency of Operation IC 5 GHz Only:
The use in the UNII (Unlicensed National Information Infrastructure) band 1 (5150-5250 MHz) is restricted to Indoor Use Only; any other use will make the operation of this device illegal. Industry Canada Statement:
Caution: The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-Channel mobile satellite systems. High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices. Zebra Technologies Corporation Zebra Confidential Restricted Regulatory Guide egulatory Guide (RG) Rev. A
: Le dispositive fonctionnant dans la bande 5150-5250 MHz est rserv uniquement pour une utilisation rserv uniquement pour une utilisation Avertissement: Le dispositive fonctionnant dans la bande l'intrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les l'intrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les l'intrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. Les utilisateurs de radars de haute puissance sont dsigns la priorit) pour les bands 5250-5350 MHz et 5650 des dommages aux dispositifs LAN-EL. des dommages aux dispositifs LAN utilisateurs principaux (c.--d., qu'ils ont 5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou 5850 MHz et que ces radars pourraient causer du brouillage et/ou Les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c. 2.4 GHz Only:
The available channels for 802.11 b/g operation in the US are Channels 1 to 11. The range of channels is limited by firmware. ion in the US are Channels 1 to 11. The range of channels is limited by firmware. ion in the US are Channels 1 to 11. The range of channels is limited by firmware. Warnings for Use of Wireless Devices Caution: Please observe all warning notices with regard to the usage of wireless devices. warning notices with regard to the usage of wireless devices. Potentially Hazardous Atmospheres Fixed Installations Fixed Installations You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants etc. and are You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants etc. and are You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants etc. and areas where the air contains chemicals or particles such as grain, dust, or metal powders. where the air contains chemicals or particles such as grain, dust, or metal powders. Safety in Aircraft witch off your wireless device whenever you are instructed to do so by airport or airline staff. If your device offers a fli Switch off your wireless device whenever you are instructed to do so by airport or airline staff. If your device offers a fli witch off your wireless device whenever you are instructed to do so by airport or airline staff. If your device offers a flight mode or similar feature, consult airline staff as to its use in flight. or similar feature, consult airline staff as to its use in flight. Safety in Hospitals Wireless devices transmit radio frequency energy and may affect medical electrical equipement. ices transmit radio frequency energy and may affect medical electrical equipement. Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics, or healthcare facilitlies. These Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics or healthcare facilitlies. These requests are designed to prevent possible interference with sensitive medical equipement. requests are designed to prevent possible interference with sensitive medical equipement. Wireless devices transmit radio frequency energy and may affect medical electrical equipment. When installed adjacent to other Wireless devices transmit radio frequency energy and may affect medi installed adjacent to other equipment, it is advised to verify that the adjacent equipment is not adversely affected. ipment, it is advised to verify that the adjacent equipment is not adversely affected. Pacemakers Pacemaker manufacturers recommended that a minimum of 15cm (6 inches) be maintained between a handheld wireless device Pacemaker manufacturers recommended that a minimum of 15cm (6 inches) be maintained between a handheld wireless device Pacemaker manufacturers recommended that a minimum of 15cm (6 inches) be maintained between a handheld wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with independent erference with the pacemaker. These recommendations are consistent with independent erference with the pacemaker. These recommendations are consistent with independent research and recommendations by Wireless Technology Research. research and recommendations by Wireless Technology Research. Persons with Pacemakers:
Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker when Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker when turned ON turned ON. Should not carry the device in a breast pocket Should not carry the device in a breast pocket. Should use the ear furthest from the pacemaker to minimise the potential for inter Should use the ear furthest from the pacemaker to minimise the potential for interference. If you have any reason to suspect that interference is taking place, turn OFF your device If you have any reason to suspect that interference is taking place, turn OFF your device. Zebra Technologies Corporation Zebra Confidential Restricted Page 2 of 8 Regulatory Guide egulatory Guide (RG) Rev. A Other Medical Devices Please consult your physician or the manufacturer of the medical device to determine if the operation of your wireless produ Please consult your physician or the manufacturer of the medical device to determine if the operation of your wireless produ Please consult your physician or the manufacturer of the medical device to determine if the operation of your wireless product may interfere with the medical device. RF Exposure Guidelines Safety Information Reducing RF Exposure Use Properly Properly Only operate the device in accordance with the instructions supplied. Only operate the device in accordance with the instructions supplied. International The device complies with internationally recognized standards covering human exposure to electromagnetic fields from The device complies with internationally recognized standards covering human exposure to electromagnetic fields from The device complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices. For information on International human exposure to electromagnet fields, refer to the Zebra Declaration For information on International human exposure to electromagnet fields, refer to the Zebra Declaration For information on International human exposure to electromagnet fields, refer to the Zebra Declaration of Conformity (DoC) at http://www.zebra.com/
http://www.zebra.com/doc. For further information on the safety of RF energy fr For further information on the safety of RF energy from wireless devices, see http://responsibility.zebra.com/index.php/downloads/, which is located under Wireless Communications and Health. Wireless Communications and Health. http://responsibility.zebra.com/index.php/downloads/
US and Canada o Co-located statement To comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must not be co To comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must not be co To comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must not be co-located or operating in conjunction with any other transmitter/antenna except those already approved in this filling. or operating in conjunction with any other transmitter/antenna except those already approved in this filling. or operating in conjunction with any other transmitter/antenna except those already approved in this filling. To satisfy US and Canadian RF exposure requirements, a transmitting device must operate with a nadian RF exposure requirements, a transmitting device must operate with a nadian RF exposure requirements, a transmitting device must operate with a XX cm or more from a persons body. The minimum separation minimum separation distance of XX The minimum separation distance 35 cm must match the distance established in the SAR Test report. cm must match the distance established in the SAR Test report. Pour satisfaire aux exigences Amricaines et Canadiennes d'exposition aux radio frquences, un re aux exigences Amricaines et Canadiennes d'exposition aux radio frquences, un re aux exigences Amricaines et Canadiennes d'exposition aux radio frquences, un dispositif de transmission doit fonctionner avec une distance de sparation minimale de dispositif de transmission doit fonctionner avec une distance de sparation minimale de XX cm ou cm ou plus de corps d'une personne. Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance should be installed and operated with minimum distance 35 cm between the radiator and your body. cm between the radiator and your body. NOTE IMPORTANTE: (Pour l'utilisation de dispositifs mobiles) ORTANTE: (Pour l'utilisation de dispositifs mobiles) Dclaration d'exposition aux radiations:
Dclaration d'exposition aux radiations:
Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de nt doit tre install et utilis avec un minimum de 35 cm de distance entre la source de cm de distance entre la source de rayonnement et votre corps. Zebra Technologies Corporation Zebra Confidential Restricted Page 3 of 8 Regulatory Guide egulatory Guide (RG) Rev. A o Remote and Standalone Antenna Configurations Remote and Standalone Antenna Configurations To comply with FCC RF exposure requirements, antennas that are mounted externally at remote locations or To comply with FCC RF exposure requirements, antennas that are mounted externally at remote locations or To comply with FCC RF exposure requirements, antennas that are mounted externally at remote locations or operating near users at stand-alone desktop of similar configurations must operate with a minimum separation alone desktop of similar configurations must operate with a minimum separation alone desktop of similar configurations must operate with a minimum separation distance of 35 cm from all persons. cm from all persons. To comply with FCC Antenna requirements, the Antenna must be adjust such that the RF emission lobes are comply with FCC Antenna requirements, the Antenna must be adjust such that the RF emission lobes are comply with FCC Antenna requirements, the Antenna must be adjust such that the RF emission lobes are below 30 degrees elevation. Radio Frequency Interference Requirements Radio Frequency Interference Requirements- FCC 3.
: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the for a Class B digital device, pursuant to Part 15 of the Note: This equipment has been tested and found to comply with the limits FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installat FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installat FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will no instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will no instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be occur in a particular installation. If this equipment does cause harmful i nterference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of t determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of t determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Consult the dealer or an experienced radio/TV technician for help. Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not ronment. This equipment generates, uses, and can radiate radio frequency energy and, if not ronment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operati installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operati installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the rea is likely to cause harmful interference in which case the user will be required to correct the rea is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Radio Transmitters (Part 15) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two c This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not onditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause cause harmful interference, and (2) this device must accept any interference received including interference that may cause cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation. When the radio is configured for outdoor operation, EIRP will be limited to When the radio is configured for outdoor operation, EIRP will be limited to below 21dBm based on the antenna gain and elevation below 21dBm based on the antenna gain and elevation gain entered. The software automatically restricts the output power to the certified levels when the professional installer s gain entered. The software automatically restricts the output power to the certified levels when the professional installer s gain entered. The software automatically restricts the output power to the certified levels when the professional installer selects the approved antenna that is being used. Zebra Technologies Corporation Zebra Confidential Restricted Page 4 of 8 Regulatory Guide egulatory Guide (RG) Rev. A SET BRAND MODEL NUMBER MODEL NUMBER ANTENNA TYPE CONNECTOR INDOOR/OUTDOOR INDOOR/OUTDOOR CEDAR-INT-ANT indoor/outdoor indoor/outdoor CEDAR-INT-ANT Monopole 1 Zebra U.FL Antenna Gain (dBi) Set Chain1 2.4G Chain2 Chain3 Chain1 2.4G Chain2 Chain3 4.1 4.1 4.4 4.4 5.9 5.4 5.9 5.9 Note:
Maximum conducted Maximum conducted power(dBm) power(dBm) 2.4GHz 5GHz UNII-1 / indoor 5GHz UNII-1 / outdoor 5GHz UNII-1 / outdoor Above 30 degree 5GHz UNII-2A 5GHz UNII-2C 5GHz UNII-3 26.28 22.79 16.88 16.88 21.91 22.41 22.84 Antenna Gain(dBi) 4.4 5.9 5.9 4.1 5.9 5.9 5.9 Maximum EIRP Maximum EIRP power(dBm) power(dBm) 30.68 28.69 22.78 20.98 27.81 28.31 28.74 4. Radio Frequency Interference Requirements Radio Frequency Interference Requirements- Canada CAN ICES-3 (B)/NMB-3(B) Radio Transmitters For RLAN Devices:
The use of 5 GHz RLANs, for use in Canada, have the following restrictions:
The use of 5 GHz RLANs, for use in Canada, have the following restrictions:
Restricted Band 5.60 5.65 GHz 5.65 GHz This device is in compliance with the NRC for Industry Canada applicable to license This device is in compliance with the NRC for Industry Canada applicable to license-exempt radios. Use is allowed exempt radios. Use is allowed with the following two conditions: (1) the device must not produce interference, and (2) the the device must with the following two conditions: (1) the device must not produce interference, and (2) the the device must with the following two conditions: (1) the device must not produce interference, and (2) the the device must accept any interference to the radio even if the interference is likely to compromise operation. interference to the radio even if the interference is likely to compromise operation. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. Le prsent appareil est conforme aux CNR d'Industrie Canada applicable s aux appareils radio exempts de licence. L'exploitation est autorise aux deux condi L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) tions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radio lectrique subi mme si le brouillage est susceptible d'en l'utilisateur de l'appareil doit accepter tout brouillage radio lectrique subi mme si le brouillage est susceptible d'en l'utilisateur de l'appareil doit accepter tout brouillage radio lectrique subi mme si le brouillage est susceptible d'en compromettre le fonctionnement. Label Marking: The Term IC: before the radio certification only signifies that Industry Canada technical specifications were met. IC: before the radio certification only signifies that Industry Canada technical specifications were met. IC: before the radio certification only signifies that Industry Canada technical specifications were met. Zebra Technologies Corporation Zebra Confidential Restricted Page 5 of 8 Regulatory Guide egulatory Guide (RG) Rev. A In accordance with the regulations of Industry Canada, this radio transmitter can operate with an antenna of a type In accordance with the regulations of Industry Canada, this radio transmitter can operate with an antenna of a type In accordance with the regulations of Industry Canada, this radio transmitter can operate with an antenna of a type and a maximum gain (or lower) approved for the transmitter by Industry Canada. With the aim of reducing the risk of r) approved for the transmitter by Industry Canada. With the aim of reducing the risk of r) approved for the transmitter by Industry Canada. With the aim of reducing the risk of radio interference to other users, the chosen antenna type and it gain should be selected so that the equivalent radio interference to other users, the chosen antenna type and it gain should be selected so that the equivalent radio interference to other users, the chosen antenna type and it gain should be selected so that the equivalent isotropically radiated power (e.i.r.p.) does not exceed the intensity necessary for the establishment of a satisfactory isotropically radiated power (e.i.r.p.) does not excee d the intensity necessary for the establishment of a satisfactory connection. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'
d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radio lectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain d risques de brouillage radio lectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain d risques de brouillage radio lectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpa sse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. d'une communication satisfaisante. This radio transmitter (CDRDB) has been approved by Industry Canada to operate with the antenna types listed below has been approved by Industry Canada to operate with the antenna types listed below has been approved by Industry Canada to operate with the antenna types listed below and having a maximum gain allowable and the impedance and having a maximum gain allowable and the impedance required for each type of antenna. The antenna types not required for each type of antenna. The antenna types not included in this list, or whose gain is higher than the maximum gain indicates, are strictly prohibited for the operation of included in this list, or whose gain is higher than the maximum gain indicates, are strictly prohibited for the operation of included in this list, or whose gain is higher than the maximum gain indicates, are strictly prohibited for the operation of the transmitter. The antenna list and types are included in the following tables:
MODEL NUMBER ANTENNA TYPE CONNECTOR INDOOR/OUTDOOR INDOOR/OUTDOOR SET BRAND MODEL NUMBER indoor/outdoor CEDAR-INT-ANT CEDAR-INT-ANT Monopole indoor/outdoor 1 Zebra U.FL Antenna Gain (dBi) Set Chain1 2.4G Chain2 Chain3 Chain1 2.4G Chain2 Chain3 4.1 4.1 4.4 4.4 5.9 5.4 5.9 5.9 Le prsent metteur radio (identifier le dispositif par son numro de certification ou son numrode modle s'il fait Le prsent metteur radio (identifier le dispositif par son numro de certification ou son numrode modle s'il fait Le prsent metteur radio (identifier le dispositif par son numro de certification ou son numrode modle s'il fait partie du matriel de catgorie I) a t approuv par Industrie Canada pour fonctionner avec les types partie du matriel de catgorie I) a t approuv par Industrie Canada pour fonctionner avec les types partie du matriel de catgorie I) a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal et l'impdance requise pour chaque type d'antenne. Les dessous et ayant un gain admissible maximal et l'impdance requise pour chaque type d'antenne. Les dessous et ayant un gain admissible maximal et l'impdance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste ou dont le gain est suprieur au gain maximal indiqu, sont strictement types d'antenne non inclus dans cette liste ou dont le gain est suprieur au gain maximal indiqu, sont strictement types d'antenne non inclus dans cette liste ou dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. ploitation de l'metteur. Note:
Zebra Technologies Corporation Zebra Confidential Restricted Page 6 of 8 Regulatory Guide egulatory Guide (RG) Rev. A Statement of Compliance Zebra hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive declares that this device is in compliance with the essential requirements and other relevant provisions of Directive declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC and 2011/65/EU. A Declaration of Conformity may be obtained Declaration of Conformity may be obtained from http://www.zebra.com/doc
.com/doc. 5. Waste Electrical and Electronic Equipment Waste Electrical and Electronic Equipment (WEEE)
:
Zebra for recycling. For dienen aan het einde van hun levensduur naar Zebra te For EU Customers: All products at the end of their life must be returned to Zebra Para clientes en la Unin Europea: todos los productos debern entregarse a Zebra
:
, English: For EU Customers: All products at the end of their life must be retur information on how to return product, please go to:
information on how to return product, please go to: www.zebra.com/weee. Franais: Clients de l'Union Europenne: Tous les produits en fin de cycle de vie doivent tre retourns Clients de l'Union Europenne: Tous les produits en fin de cycle de vie doivent tre retourns Clients de l'Union Europenne: Tous les produits en fin de cycle de vie doivent tre retourns pour recyclage. Pour de plus amples informations sur le retour de produits, consultez Zebra pour recyclage. Pour de plus amples informations sur le retour de produits, consultez pour recyclage. Pour de plus amples informations sur le retour de produits, consultez :
www.zebra.com/weee. Espaol: Para clientes en la Unin Europea: todos los productos debern entregarse a Zebra al final de su ciclo de vida para que sean reciclados. Si desea ms informacin sobre cmo devolver un producto, visite:
ciclo de vida para que sean reciclados. Si desea ms informacin sobre cmo devolver un producto, visite:
www.zebra.com/weee.
: :
Zebra . www.zebra.com/weee. Deutsch: Fr Kunden innerhalb der EU: Alle Produkte mssen am Ende ihrer Lebensdauer zum Recycling an Fr Kunden innerhalb der EU: Alle Produkte mssen am Ende ihrer Lebensdauer zum Recycling an Fr Kunden innerhalb der EU: Alle Produkte mssen am Ende ihrer Lebensdauer zum Recycling an Zebra zurckgesandt werden. Informationen zur Rcksendung von Produkten finden Sie unter zurckgesandt werden. Informationen zur Rcksendung von Produkten finden Sie unter zurckgesandt werden. Informationen zur Rcksendung von Produkten finden Sie unter www.zebra.com/weee. Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono essere per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono essere per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono essere restituiti a Zebra al fine di consentirne il riciclaggio. Per informazioni sulle modalit di restituzione, visitare il al fine di consentirne il riciclaggio. Per informazioni sulle modalit di restituzione, visitare il al fine di consentirne il riciclaggio. Per informazioni sulle modalit di restituzione, visitare il seguente sito Web: www.zebra.com/weee bra.com/weee. Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos Portugus: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos Zebra para reciclagem. Para obter informaes sobre como devolver o produto, visite: www.zebra.com/weee www.zebra.com/weee. reciclagem. Para obter informaes sobre como devolver o produto, visite:
Nederlands: Voor klanten in de EU: alle producten Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar worden teruggezonden voor recycling. Raadpleeg www.zebra.com/weee voor meer informatie over het worden teruggezonden voor recycling. Raadpleeg voor meer informatie over het terugzenden van producten. Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji naley zwrci do firmy Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji naley zwrci do firmy Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji naley zwrci do firmy Zebra w celu ich utylizacji. Informacje na temat zwrotu produktw znajduj si na stronie internetowej w celu ich utylizacji. Informacje na temat zwrotu produktw znajduj si na stronie internetowej w celu ich utylizacji. Informacje na temat zwrotu produktw znajduj si na stronie internetowej www.zebra.com/weee. etina: Pro zkaznky z EU: Vechny pr k recyklaci. Informace o zpsobu vrcen produktu najdete na webov strnce:
Eesti: EL klientidele: kik tooted tuleb nende eluea lppedes tagastada taaskasutamise e Lisainformatsiooni saamiseks toote tagastamise kohta klastage palun aadressi: www.zebra.com/weee Lisainformatsiooni saamiseks toote tagastamise kohta klastage palun aadressi:
www.zebra.com/weee. Magyar: Az EU-ban vsrlknak: Minden tnkrement termket a jrahasznosts cljbl. A termk visszajuttatsnak mdjval kapcsolatos tudnivalkrt ltogasson el a jrahasznosts cljbl. A termk visszaju ttatsnak mdjval kapcsolatos tudnivalkrt ltogasson el a www.zebra.com/weee weboldalra. weboldalra. Fr kunder inom EU: Alla produkter som uppntt sin livslngd mste returneras till Svenska: Fr kunder inom EU: Alla produkter som uppntt sin livslngd mste returneras till Fr kunder inom EU: Alla produkter som uppntt sin livslngd mste returneras till Zebra fr tervinning. Information om hur du returnerar produkten finns tervinning. Information om hur du returnerar produkten finns p www.zebra.com/weee. Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrtettvksi Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrtettvksi Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrtettvksi Zebra-yhtin, kun tuotetta ei en kytet. Listietoja tuotteen palauttamisesta on osoitteessa www.zebra.com/weee tuotetta ei en kytet. Listietoja tuotteen palauttamisesta on osoitteessa www.zebra.com/weee. Dansk: Til kunder i EU: Alle produkter skal returneres til oplysningerne om returnering af produkter p:
oplysningerne om returnering af produkter p: www.zebra.com/weee.
: ..:
Zebra
, Malti: Gal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl gand Zebra gar-riikla. Gal aktar tag www.zebra.com/weee. Romnesc: Pentru clienii din UE: Toate produsele, la sfr Zebra pentru reciclare. Pentru informa Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku ivljenjske dobe vrniti podjetju Za kupce v EU: vsi izdelki se morajo po poteku ivljenjske dobe vrniti podjetju Za informacije o vrailu izdelka obi Slovenina: Pre zkaznkov z krajn EU: Vetky vrobky musia by spolonosti Zebra na recyklciu. Bliie informcie o vrten vrobkov njdete na:
Lietuvi: ES vartotojams: visi gaminiai, pasibaigus j Zebra. Daugiau informacijos, kaip gr
. www.zebra.com/weee . prodotti kollha li jkunu waslu fl-aar tal-ajja ta' l-uu taghom, iridu ji recyklaci. Informace o zpsobu vrcen produktu najdete na webov strnce: www.zebra.com/weee www.zebra.com/weee. pentru reciclare. Pentru informaii despre returnarea produsului, accesai: www.zebra.com/weee www.zebra.com/weee. Pre zkaznkov z krajn EU: Vetky vrobky musia by po uplynut doby ich ivotnosti vrten po uplynut doby ich ivotnosti vrten Til kunder i EU: Alle produkter skal returneres til Zebra til recirkulering, nr de er udtjent. Ls til recirkulering, nr de er udtjent. Ls EL klientidele: kik tooted tuleb nende eluea lppedes tagastada taaskasutamise eesmrgil ES vartotojams: visi gaminiai, pasibaigus j eksploatacijos laikui, turi bti grinti utilizuoti na recyklciu. Bliie informcie o vrten vrobkov njdete na: www.zebra.com/weee www.zebra.com/weee. ii din UE: Toate produsele, la sfritul duratei lor de funcionare, trebuie returnate la e, trebuie returnate la ban vsrlknak: Minden tnkrement termket a Zebra vllalathoz kell eljuttatni vllalathoz kell eljuttatni
. Daugiau informacijos, kaip grinti gamin, rasite: www.zebra.com/weee. EU: Vechny produkty je nutn po skonen jejich ivotnosti vrtit spole
..: , , al aktar tagrif dwar kif gandek tirritorna l-prodott, jekk jog ilu izdelka obiite: www.zebra.com/weee. ivotnosti vrtit spolenosti Zebra prodott, jekk jogbok ur:
inti utilizuoti kompanij hom, iridu jiu rritornati Zebra za reciklao. esmrgil Zebra'ile. Zebra Technologies Corporation Zebra Confidential Restricted Page 7 of 8 Regulatory Guide egulatory Guide (RG) Rev. A ES klientiem: visi produkti pc to kalpoanas ma beigm ir jnogd atpaka Zebra Zebra otrreizjai Latvieu: ES klientiem: visi produkti p prstrdei. Lai iegtu informciju par produktu nog Trke: AB Mterileri iin: Kullanm sresi dolan tm r rnlerin nasl iade edilecei hakknda bilgi iin ltfen terileri iin: Kullanm sresi dolan tm rnler geri dntrme iin Zebra'ya iade edilmelidir.
'ya iade edilmelidir. i hakknda bilgi iin ltfen u adresi ziyaret edin: www.zebra.com/weee www.zebra.com/weee. ciju par produktu nogdanu Zebra, ldzu, skatiet: www.zebra.com/weee www.zebra.com/weee. Korea Warning Statement for Class B ITE Class B ITE Taiwan South Korea For a radio equipment using 2400~2483.5MHz or 5725~5825MHz, the following two expression should be For a radio equipment using 2400~2483.5MHz or 5725~5825MHz, the following two expression should be For a radio equipment using 2400~2483.5MHz or 5725~5825MHz, the following two expression should be displayed;
(B) B
,
(
)
.
()
/
MPE1mW/cm 1mW/cm 35 cm Zebra Technologies Corporation Zebra Confidential Restricted Page 8 of 8