FCC ID: UZ7RAAP800 802.11ac Module

by: Zebra Technologies Corporation latest update: 2016-05-27 model: RAAP800

Four grants have been issued under this FCC ID from 09/12/2013 to 05/27/2016 (this is one of one hundred and thirty releases in 2016 for this grantee). Public details available include internal & external photos, manuals, and frequency information. some products also feature user submitted or linked warrantee terms, password defaults, troubleshooting guides, drivers, & instructions.
permalink for this FCC identifier
|
|
|   
eg for Slack usage
app s submitted / available
1 2 3 4 User Manual Users Manual pdf 387.98 KiB / December 06 2014
1 2 3 4 Cover Letter(s) pdf
1 2 3 4 Test Report pdf / December 06 2014
1 2 3 4 External Photos pdf / December 06 2014
1 2 3 4 Test Setup Photos pdf / December 06 2014
1 2 3 4 External Photos pdf / December 06 2014
1 2 3 4 Test Report pdf / December 06 2014
1 2 3 4 Test Report pdf / December 06 2014
1 2 3 4 Test Report pdf / December 06 2014
1 2 3 4 Test Report pdf / December 06 2014
1 2 3 4 Test Report pdf / December 06 2014
1 2 3 4 Test Report pdf / December 06 2014
1 2 3 4 Test Report pdf / December 06 2014
1 2 3 4 Test Report pdf / December 06 2014
1 2 3 4 Internal Photos pdf / December 06 2014
1 2 3 4 Test Report pdf / December 06 2014
1 2 3 4 Cover Letter(s) pdf / December 06 2014
1 2 3 4 Test Setup Photos pdf / December 06 2014
1 2 3 4 Cover Letter(s) pdf / December 06 2014
1 2 3 4 Attestation Statements pdf May 06 2014 / December 06 2014
1 2 3 4 Test Report pdf May 09 2013 / December 09 2013
1 2 3 4 External Photos pdf May 09 2013 / December 09 2013
1 2 3 4 Internal Photos pdf May 09 2013 / December 09 2013
1 2 3 4 ID Label/Location Info pdf May 09 2013 / December 09 2013
1 2 3 4 RF Exposure Info pdf May 09 2013 / December 09 2013
1 2 3 4 Cover Letter(s) pdf May 09 2013 / December 09 2013
1 2 3 4 Cover Letter(s) pdf May 09 2013 / December 09 2013
1 2 3 4 Test Report pdf May 09 2013 / December 09 2013
1 2 3 4 Test Report pdf May 09 2013 / December 09 2013
1 2 3 4 Test Report pdf May 09 2013 / December 09 2013
1 2 3 4 Test Setup Photos pdf May 09 2013 / December 09 2013
1 2 3 4 Cover Letter(s) pdf May 09 2013 / December 09 2013
1 2 3 4 User Manual Users Manual pdf 387.98 KiB / December 06 2014

frequency equipment class purpose
1 2016-05-27 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX Class II permissive change or modification of presently authorized equipment
2 2014-06-12 5660 ~ 5700 NII - Unlicensed National Information Infrastructure TX
3 2013-09-12 5775 ~ 5775 DTS - Digital Transmission System Original Equipment
4 5210 ~ 5210 NII - Unlicensed National Information Infrastructure TX

Application Forms

app s Applicant Information
1 2 3 4 Effective 2016-05-27
1 2 3 4 2014-06-12
1 2 3 4 2013-09-12
1 2 3 4 Applicant's complete, legal business name Zebra Technologies Corporation
1 2 3 4 FCC Registration Number (FRN) 0015642663
1 2 3 4 Physical Address 1 Zebra Plaza
1 2 3 4 Holtsville, New York 11742
1 2 3 4 United States
app s TCB Information
1 2 3 4 TCB Application Email Address t******@timcoengr.com
1 2 3 4 T******@TIMCOENGR.COM
1 2 3 4 TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
app s FCC ID
1 2 3 4 Grantee Code UZ7
1 2 3 4 Equipment Product Code RAAP800
app s Person at the applicant's address to receive grant or for contact
1 2 3 4 Name L****** Z****
1 2 3 4 Title Regulatory Specialist
1 2 3 4 Telephone Number 346-2********
1 2 3 4 Fax Number 631-6********
1 2 3 4 E-mail L******@zebra.com
app s Technical Contact
1 2 3 4 Firm Name Sporton International Inc.
1 2 3 4 Name V******** H****
1 2 3 4 Physical Address No.8, Lane 724, Bo-ai St., Jhubei City
1 2 3 4 Hsinchu, 302
1 2 3 4 Taiwan
1 2 3 4 Telephone Number 886-3******** Extension:
1 2 3 4 Fax Number 886-3********
1 2 3 4 E-mail v******@sporton.com.tw
app s Non Technical Contact
1 2 3 4 Firm Name Sporton International Inc.
1 2 3 4 Name V****** H********
1 2 3 4 Physical Address No.8, Lane 724, Bo-ai St., Jhubei City
1 2 3 4 Hsinchu, 302
1 2 3 4 Taiwan
1 2 3 4 Telephone Number 886-3******** Extension:
1 2 3 4 Fax Number 886-3********
1 2 3 4 E-mail v******@sporton.com.tw
app s Confidentiality (long or short term)
1 2 3 4 Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 3 4 Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 4 Is this application for software defined/cognitive radio authorization?No
1 2 3 4 Equipment ClassNII - Unlicensed National Information Infrastructure TX
1 2 3 4 DTS - Digital Transmission System
1 2 3 4 Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)802.11ac Module
1 2 3 4 802.11ac MODULE
1 2 3 4 Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
1 2 3 4 Modular Equipment TypeLimited Single Modular Approval
1 2 3 4 Single Modular Approval
1 2 3 4 Purpose / Application is forClass II permissive change or modification of presently authorized equipment
1 2 3 4 Original Equipment
1 2 3 4 Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
1 2 3 4 Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
1 2 3 4 Grant CommentsLimited Single Modular Approval. Power listed is maximum combined conducted output power. Operations in 5.15-5.25GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 35cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 12.50dBi in 5.2GHz band. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20MHz, 40MHz, and 80MHz bandwidth modes.
1 2 3 4 Single Modular Approval. Power listed is maximum combined conducted output power. Operations in 5.15-5.25GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 35cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 12.50dBi in 5.2GHz band. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20MHz, 40MHz, and 80MHz bandwidth modes.
1 2 3 4 Single Modular Transmitter. Power listed is maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 35cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 12.50dBi in 5.8GHz bands. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20MHz, 40MHz, and 80MHz bandwidth modes.
1 2 3 4 Is there an equipment authorization waiver associated with this application?No
1 2 3 4 If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
1 2 3 4 Firm Name SPORTON International Inc.
1 2 3 4 Sporton International Inc.
1 2 3 4 Name S******** J****
1 2 3 4 A****** C******
1 2 3 4 Telephone Number 886-3******** Extension:
1 2 3 4 886-3******** Extension:
1 2 3 4 Fax Number 886-3********
1 2 3 4 886-3********
1 2 3 4 E-mail s******@sporton.com.tw
1 2 3 4 a******@sporton.com.tw
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E 48 CC MO 5180 5240 0.05
1 2 15E 48 CC MO 5745 5825 0.612
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15E CC MO 5180 5240 0.05
2 2 15E CC MO ND 5260 5320 0.2506
2 3 15E CC MO ND 5500 5580 0.2506
2 4 15E CC MO ND 5660 5700 0.25
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC MO 5745 5825 0.612
3 2 15C CC MO 5755 5795 0.537
3 3 15C CC MO 5775 5775 0.568
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15E CC MO 5180 5240 0.05
4 2 15E CC MO 5190 5230 0.05
4 3 15E CC MO 5210 5210 0.044

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC