MN-002916-01a_ds2278front-qsg-en_print.pdf 1 4/17/2017 10:18:36 AM DS2278 DIGITAL SCANNER http://www.zebra.com/DS2278 Digital Scanner Quick Start Guide A A E E R R A A K K R R O O W W N N I I T T S S O O P P BATTERY REMOVAL Note: It is recommended to fully charge the battery before use. 1 Unscrew 2 Remove Battery USEFUL BAR CODES DIGITAL SCANNER FEATURES FACTORY DEFAULTS RETURN TO FACTORY DEFAULTS ADD AN ENTER KEY
(Carriage Return/Line Feed) To add an Enter key after scanned data, scan the bar code below. ADD AN ENTER KEY (CARRIAGE RETURN/LINE FEED) ADD A TAB KEY To add a Tab key after scanned data, scan the bar code below. ADD A TAB KEY 3 4 Note: Standard range digital scanner pictured. 1 2 1 Scan Window Scan Trigger 2 Scan LEDs 3 4 Beeper See Product Reference Guide for detailed information USB CAPS LOCK OVERRIDE BAR CODE CRADLE INSERTION USB - OVERRIDE CAPS LOCK KEY (ENABLE)
*USB - DO NOT OVERRIDE CAPS LOCK KEY (DISABLE) BATTERY INSERTION CHARGE ONLY MICRO USB CONNECTION CRADLE CABLE CONNECTION 1 Replace Battery 2 Push Down 3 Screw to Tighten Note: For best performance, it is recommended to use Zebra accessories. Host Port STEP 1 - CONNECT HOST INTERFACE USB STEP 2 - SET UP INTERFACE (Scan Host Bar Codes) USB Scan ONE of the bar codes below The interface cable automatically detects the host interface type and uses the default setting. If the default (*) does not meet your requirements, scan another host bar code below.
*USB KEYBOARD (HID) IBM HAND-HELD USB C M Y CM MY CY CMY K NOTE: Cables may vary depending on configuration RS-232 OPOS (IBM HAND-HELD with FULL DISABLE) SYMBOL NATIVE API (SNAPI) WITH IMAGING RS-232 Scan ONE of the bar codes below The interface cable automatically detects the host interface type and uses the default setting. If the default (*) does not meet your requirements, scan another host bar code below.
*STANDARD RS-232 NIXDORF RS-232 MODE B ICL RS-232 FUJITSU RS-232 KEYBOARD WEDGE NIXDORF RS-232 MODE A OPOS/JPOS Keyboard Wedge Scan a bar code below The Auto-Host Detect Cable feature automatically detects the host interface type and uses the default setting. If the default (*) does not meet your requirements, scan the IBM PC/AT and IBM PC COMPATIBLE bar code below.
*IBM AT NOTEBOOK IBM PC/AT and IBM PC COMPATIBLE IBM 46XX IBM 46XX Scan ONE of the bar codes below The Auto-Host Detect Cable feature automatically detects the host interface type, but there is no default setting. Scan one of the bar codes below to select the appropriate port. NON-IBM SCANNER EMULATION (PORT 5B) TABLE-TOP SCANNER EMULATION (PORT 17) HAND-HELD SCANNER EMULATION (PORT 9B) Aiming 0 1 2 3 45 0 1 2 3 45 123Scan ABOUT 123Scan 123Scan is an easy-to-use, PC-based software tool that enables rapid and easy customized setup of a scanner via a bar code or USB cable. For more information, visit: http://www.zebra.com/123Scan. UTILITY FUNCTIONALITY
- Device configuration
- Electronic programming (USB cable)
- Programming bar code(s)
- Data view scan log (display scanned bar code data)
- Access asset tracking information
- Upgrade firmware and view release notes
- Remote management (SMS package generation) MN-002916-01a_ds2278back-qsg-en.pdf 1 4/17/2017 10:16:41 AM DS2278 DIGITAL SCANNER SCANNING RECOMMENDED USAGE GUIDE - OPTIMUM BODY POSTURE Avoid Extreme Wrist Angles Avoid Bending Avoid Reaching N I T S O P A E R A K R O W AVOID BENDING AVOID REACHING Health and Safety Recommendation Ergonomic Recommendations Caution: In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your local Health & Safety Manager to ensure that you are adhering to your company's safety programs to prevent employee injury. Reduce or eliminate repetitive motion Maintain a natural position Reduce or eliminate excessive force Reduce or eliminate vibration Perform tasks at correct heights Keep objects that are used frequently within easy reach Reduce or eliminate direct pressure Provide adjustable workstations Provide adequate clearance Provide a suitable working environment Improve work procedures. AVOID EXTREME WRIST ANGLES BEEPER INDICATIONS Indication Beeper Sequence Power up Bar code decoded Transmission error detected; data is ignored Successful parameter setting Correct programming sequence performed Incorrect programming sequence, or Cancel bar code scanned Low battery indication (on trigger release) 4 short high beeps Low/medium/high beeps Medium beep 4 long low beeps High/low/high/low beeps High/low beeps Long low/long high beeps Cradle Indication Cradle LED Indicator Power up Standard Use Green (stays on) Radio Indications Bluetooth connection established Green (off, then on) Battery Indications Charging Fully charged Charging error Amber blinking Green (solid) Amber fast blinking SCANNER LED INDICATIONS Hand-Held Scanning Indication LED Indicator Digital scanner is on and ready to scan, or no power to scanner Bar code is successfully decoded Transmission error Off Green flash Red Hands-Free (Presentation) Scanning No power to scanner Digital scanner is ready to scan Bar code is successfully decoded Transmission error Off Green Off momentarily Red Charging with Micro USB Connection Digital scanner is charging Digital scanner is fully charged Charge error TROUBLESHOOTING Green flash (fast continuous) Green (solid) Red (solid) Local Contact:
Digital scanner not working No power to scanner Check system power; ensure battery is charged. Ensure that correct host interface cable is used. Digital scanner is disabled Digital scanner decoding bar code, but data not transmitting to host Scan appropriate host parameter bar codes. Host interface not configured properly Interface cable is loose Invalid ADF Rule Digital scanner not paired to cradle Ensure all cable connections are secure. Program the correct ADF rules. Scan cradle pairing bar code. Digital scanner not programmed for bar code type Bar code unreadable Distance between scanner and bar code incorrect Digital scanner not decoding bar code Ensure scanner is programmed to read type of bar code being scanned. Ensure bar code is not defaced; try scanning test bar code of same bar code type. Move scanner closer to, or further from bar code. Scanned data incorrectly displayed on host Host interface not configured properly Region improperly configured Scan appropriate host parameter bar codes. Select appropriate country and language encoding scheme. C M Y CM MY CY CMY K 2017 Zebra Technologies, Inc. Zebra reserves the right to make changes to any product to improve reliability, function, or design. Zebra does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, apparatus, machine, material, method, or process in which Zebra products might be used. An implied license exists only for equipment, circuits, and subsystems contained in Zebra products. Warranty For the complete Zebra hardware product warranty statement, go to: http://www.zebra.com/warranty. For Australia Only. This warranty is given by Zebra Technologies Asia Pacific Pte. Ltd., 71 Robinson Road, #05-02/03, Singapore 068895, Singapore. Our goods come with guarantees that cannot be excluded under the Australia Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Zebra Technologies Corporation Australias limited warranty above is in addition to any rights and remedies you may have under the Australian Consumer Law. If you have any queries, please call Zebra Technologies Corporation at+65 6858 0722. You may also visit our website: http://www.zebra.com for the most updated warranty terms. Service Information If you have a problem using the equipment, contact your facilitys Technical or Systems Support. If there is a problem with the equipment, they will contact the Zebra Global Customer Support Center at:
http://www.zebra.com/support. For the latest version of this guide go to: http://www.zebra.com/support. Waste Electrical and Electronic Equipment (WEEE) English: For EU Customers: All products at the end of their life must be returned to Zebra for recycling. For information on how to return product, please go to: http://www.zebra.com/weee. Bulgarish: :
Zebra . ,
: http://www.zebra.com/weee. etina: Pro zkaznky z EU: Vechny produkty je nutn po skonen jejich ivotnosti vrtit spolenosti Zebra k recyklaci. Informace o zpsobu vrcen produktu najdete na webov strnce:
http://www.zebra.com/weee. Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til recirkulering, nr de er udtjent. Ls oplysningerne om returnering af produkter p: http://www.zebra.com/ weee. Deutsch: Fr Kunden innerhalb der EU: Alle Produkte mssen am Ende ihrer Lebensdauer zum Recycling an Zebra zurckgesandt werden. Informationen zur Rcksendung von Produkten finden Sie unter http://www.zebra.com/weee.
: ..: , , Zebra .
, http://www.zebra.com/weee . Eesti: EL klientidele: kik tooted tuleb nende eluea lppedes tagastada taaskasutamise eesmrgil Zebra'ile. Lisainformatsiooni saamiseks toote tagastamise kohta klastage palun aadressi:
http://www.zebra.com/weee. Espaol: Para clientes en la Unin Europea: todos los productos debern entregarse a Zebra al final de su ciclo de vida para que sean reciclados. Si desea ms informacin sobre cmo devolver un producto, visite: http://www.zebra.com/weee. Franais : Clients de l'Union Europenne : Tous les produits en fin de cycle de vie doivent tre retourns Zebra pour recyclage. Pour de plus amples informations sur le retour de produits, consultez :
http://www.zebra.com/weee. Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono essere restituiti a Zebra al fine di consentirne il riciclaggio. Per informazioni sulle modalit di restituzione, visitare il seguente sito Web: http://www.zebra.com /weee. Latvieu: ES klientiem: visi produkti pc to kalpoanas ma beigm ir jnogd atpaka Zebra otrreizjai prstrdei. Lai iegtu informciju par produktu nogdanu Zebra, ldzu, skatiet:
http://www.zebra.com/weee. Lietuvi: ES vartotojams: visi gaminiai, pasibaigus j eksploatacijos laikui, turi bti grinti utilizuoti kompanij Zebra. Daugiau informacijos, kaip grinti gamin, rasite: http://www.zebra.com/weee. Magyar: Az EU-ban vsrlknak: Minden tnkrement termket a Zebra vllalathoz kell eljuttatni jrahasznosts cljbl. A termk visszajuttatsnak mdjval kapcsolatos tudnivalkrt ltogasson el a http://www.zebra.com/weee weboldalra. Malti: Gal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aar tal-ajja ta' l-uu taghom, iridu jiu rritornati gand Zebra gar-riikla. Gal aktar tagrif dwar kif gandek tirritorna l-prodott, jekk jogbok ur: http://www.zebra.com/weee. Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar Zebra te worden teruggezonden voor recycling. Raadpleeg http://www.zebra.com/weee voor meer informatie over het terugzenden van producten. Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji naley zwrci do firmy Zebra w celu ich utylizacji. Informacje na temat zwrotu produktw znajduj si na stronie internetowej http://www.zebra.com/weee. Portugus: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos Zebra para reciclagem. Para obter informaes sobre como devolver o produto, visite: http://www.zebra.com/weee. Romnesc: Pentru clienii din UE: Toate produsele, la sfritul duratei lor de funcionare, trebuie returnate la Zebra pentru reciclare. Pentru informaii despre returnarea produsului, accesai:
http://www.zebra.com/weee. Slovenina: Pre zkaznkov z krajn EU: Vetky vrobky musia by po uplynut doby ich ivotnosti vrten spolonosti Zebra na recyklciu. Bliie informcie o vrten vrobkov njdete na:
http://www.zebra.com/weee. Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku ivljenjske dobe vrniti podjetju Zebra za reciklao. Za informacije o vrailu izdelka obiite: http://www.zebra.com/weee. Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrtettvksi Zebra-yhtin, kun tuotetta ei en kytet. Listietoja tuotteen palauttamisesta on osoitteessa http://www.zebra.com/weee. Svenska: Fr kunder inom EU: Alla produkter som uppntt sin livslngd mste returneras till Zebra fr tervinning. Information om hur du returnerar produkten finns p http://www.zebra.com/weee. Trke: AB Mterileri iin: Kullanm sresi dolan tm rnler geri dntrme iin Zebra'ya iade edilmelidir. rnlerin nasl iade edilecei hakknda bilgi iin ltfen u adresi ziyaret edin:
http://www.zebra.com/weee. Hrvatski: Za kupce u Europskoj uniji: Svi se proizvodi po isteku vijeka trajanja moraju vratiti tvrtki Zebra na recikliranje. Informacije o nainu vraanja proizvoda potraite na web-stranici:
http://www.zebra.com/weee TURKISH WEEE Statement of Compliance EEE Ynetmeliine Uygundur CMM Disclosure 25
(Parts)
(Pb)
(Hg)
(Cd)
(Cr (VI))
(PBB)
(PBDE)
(Metal Parts)
(Circuit Modules)
(Cables and Cable Assemblies)
(Plastic and Polymeric Parts)
(Optics and Optical Components)
(Batteries) X X O O X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O SJ/T 11364 O: SJ/T 11364--2014 X: SJ/T 11364--2014
(
This table was created to comply with China RoHS requirements. Zebra Technologies Corporation Lincolnshire, IL U.S.A. http://www.zebra.com 2017 ZIH Corp and/or its affiliates. All rights reserved. ZEBRA and the stylized Zebra head are trademarks of ZIH Corp, registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. REGULATORY INFORMATION Regulatory Information This device is approved under Zebra Technologies Corporation. This guide applies to Model Number: DS2278. All Zebra devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Local language translations are available at the following website: http://www.zebra.com/support. Any changes or modifications to Zebra equipment, not expressly approved by Zebra, could void the users authority to operate the equipment. Caution:
Only use Zebra approved and UL listed accessories, battery packs, and battery chargers. Do NOT attempt to charge damp/wet mobile computers or batteries. All components must be dry before connecting to an external power source. Declared maximum operating temperature: 50C Bluetooth Wireless Technology This is an approved Bluetooth product. For more information or to view the End Product Listing, visit https://www.bluetooth.org/tpg/listings.cfm. Wireless Device Country Approvals Note: this section is only applicable to WW/WR/EU configurations. Regulatory markings, subject to certification, are applied to the device signifying the radio(s) is/are approved for use in the following countries: United States, Canada, Japan, China, South Korea, Australia, and Europe. Please refer to the Declaration of Conformity (DoC) for details of other country markings. This is available at http://www.zebra.com/doc. Note: Europe includes, Austria, Belgium, Bulgaria, Czech Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Caution: Operation of the device without regulatory approval is illegal. Warnings for Use of Wireless Devices Radio Frequency Interference Requirements -FCC Tested to comply with FCC Standards FOR HOME OR OFFICE USE Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna Connect the equipment into an outlet on a circuit different from that to which the Consult the dealer or an experienced radio/TV technician for help. Radio Transmitters (Part 15) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Increase the separation between the equipment and receiver receiver is connected Radio Frequency Interference Requirements - Canada CAN ICES-3 (B)/NMB-3(B) Radio Transmitters This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radio lectrique subi mme si le brouillage est susceptible d'en compromettre le fonctionnement. Caution: Please observe all warning notices with regard to the usage of wireless devices. Marking and European Economic Area (EEA) Safety in Hospitals Wireless devices transmit radio frequency energy and may affect medical electrical equipment. Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics or health care facilities. These requests are designed to prevent possible interference with sensitive medical equipmet. Pacemakers Pacemaker manufacturers recommended that a minimum of 15cm (6 inches) be maintained between a handheld wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with independent research and recommendations by Wireless Technology Research. Persons with Pacemakers:
Other Medical Devices Please consult your physician or the manufacturer of the medical device, to determine if the operation of your wireless product may interfere with the medical device. RF Exposure Guidelines Bluetooth Wireless Technology for use through the EEA has the following restrictions:
Maximum radiated transmit power of 100mW EIRP in the frequency range 2.400-2.4835 GHz. Statement of Compliance Zebra hereby declares that this radio equipment is in compliance with Directive 2011/65/EU and 1999/5/EC or 2014/53/EU (2014/53/EU supersedes 1999/5/EC from 13th June 2017). The full text of the EU Declaration of Conformity is available at the following internet address: http://www.zebra.com/doc. Japan (VCCI) - Voluntary Control Council for Interference Class B ITE Safety Information Reducing RF Exposure Use Properly Only operate the device in accordance with the instructions supplied. International The device complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices. For information on International human exposure to eletromagnetic fields refer to the Zebra Declaration of Conformity (DoC) at http://www.zebra.com/doc. For further information on the safety of RF energy from wireless devices, see https://www.zebra.com/us/en/about-zebra/company-information/corporate-responsibility.html, which is located under Corporate Responsibility. Europe - Handheld Devices To comply with EU RF exposure requirements, this device must be operated in the hand with a minimum separation distance of 0 cm or more from a persons body. Other operating configurations should be avoided. US and Canada Co-located Statement To comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must not be co-located or operating in conjunction with any other transmitter/antenna except those already approved in this filling. Handheld Devices This device was tested for typical body worn or handheld operation. Use only Zebra tested and approved belt-clips, holsters, and similar accessories to ensure FCC Compliance. The use of third-party belt clips, holsters, and similar accessories may not comply with FCC RF exposure compliance requirements, and should be avoided. To satisfy US and Canadian RF exposure requirements, a transmitting device must operate with a minimum separation distance of 0 cm or more from a persons body. Pour satisfaire aux exigences Amricaines et Canadiennes d'exposition aux radio frquences, un dispositif de transmission doit fonctionner avec une distance de sparation minimale de 0 cm ou plus de corps d'une personne. LED Devices For LED devices which have been evaluated to IEC 62471 and comply with the Exempt Risk Group, no product labeling requirements apply. However, the following statement is required to comply with US and international regulations:
LED Compliance Statement:
Classified as EXEMPT RISK GROUP according to IEC 62471:2006 and EN 62471:2008. Pulse duration: 9 ms. Batteries Taiwan - Recycling EPA (Environmental Protection Administration) requires dry battery producing or importing firms in accordance with Article 15 of the Waste Disposal Act are required to indicate the recycling marks on the batteries used in sales, giveaway or promotion. Contact a qualified Taiwanese recycler for proper battery disposal. Battery Information Caution: Risk of expolosion if battery is replaced by an incorrect type. Dispose of batteries according to instructions. Use only Zebra approved batteries. Accessories which have battery charging capability are approved for use with the following battery models: Part Number BT-000317-01 (4.2 Vdc, 2400 mAh). Zebra approved rechargeable battery packs are designed and constructed to the highest standards within the industry. However, there are limitations to how long a battery can operate or be stored before needing replacement. Many factors affect the actual life cycle of a battery pack, such as heat, cold, harsh environmental conditions and severe drops. When batteries are stored over six months, some irreversible deterioration in overall battery quality may occur. Store batteries at half of full charge in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of metallic parts and electrolyte leakage. When storing batteries for one year or longer, the charge level should be verified at least once a year and charged to half of full charge. Replace the battery when a significant loss of run time is detected. Standard warranty period for all Zebra batteries is one year, regardless if the battery was purchased separately or included as part of the mobile computer or bar code scanner. For more information on Zebra batteries, please visit: http://www.zebra.com/batterybasics. Battery Safety Guidelines The area in which the units are charged should be clear of debris and combustible materials or chemicals. Particular care should be taken where the device is charged in a non commercial environment. Follow battery usage, storage, and charging guidelines found in the user's guide. Improper battery use may result in a fire, explosion, or other hazard. To charge the mobile device battery, the battery and charger temperatures must be between +32F and +104F
(0C and +40C). Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present a risk of fire, explosion, leakage, or other hazard. If you have any questions about the compatibility of a battery or a charger, contact Zebra support. For devices that utilize a USB port as a charging source, the device shall only be connected to products that bear the USB-IF logo or have completed the USB-IF compliance program. Do not disassemble or open, crush, bend or deform, puncture, or shred. Severe impact from dropping any battery-operated device on a hard surface could cause the battery to overheat. Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals. Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, or expose to fire, explosion, or other hazard. Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle or near a radiator or other heat source. Do not place battery into a microwave oven or dryer. Battery usage by children should be supervised. Please follow local regulations to promptly dispose of used re-chargeable batteries. Do not dispose of batteries in fire. Seek medical advice immediately if a battery has been swallowed. In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with large amounts of water and seek medical advice. If you suspect damage to your equipment or battery, contact Zebra support to arrange for inspection. Korea Warning Statement for Class B ITE Other Countries Brazil (UNWANTED EMISSIONS - ALL PRODUCTS) Regulatory declarations for DS2278 - BRAZIL For more information consult the website www.anatel.gov.br NOTA: A marca de certificao se aplica ao Equip. de Radiao Restrita, modelo DS2278. Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Para maiores consultas sobre ANATEL consulte o site: www.anatel.gov.br. Chile Este equipo cumple con la Resolucin No 403 de 2008, de la Subsecretaria de telecomunicaciones, relativa a radiaciones electromagnticas. China www.zebra.com/support
:
Eurasian Customs Union EAC. Mexico Restrict Frequency Range to: 2.450 2.4835 GHz. La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. S. Korea For a radio equipment using 2400~2483.5MHz or 5725~5825MHz, the following expression should be displayed:
. Taiwan Ukraine 1057, 2008
. Thailand
. MN-002916-01 Revision A April 2017 DS2278 DIGITAL SCANNER