app
s
|
Applicant Information
|
|
1 2 3 4 5 6
|
Effective |
2019-12-05
|
1 2 3 4 5 6
|
2019-05-02
|
1 2 3 4 5 6
|
Applicant's complete, legal business name |
Zebra Technologies Corporation
|
1 2 3 4 5 6
|
FCC Registration Number (FRN) |
0015642663
|
1 2 3 4 5 6
|
Physical Address |
1 Zebra Plaza
|
1 2 3 4 5 6
|
Holtsville
|
1 2 3 4 5 6
|
Holtsville, 11742
|
1 2 3 4 5 6
|
United States
|
|
app
s
|
TCB Information
|
1 2 3 4 5 6
|
TCB Application Email Address |
t******@timcoengr.com
|
1 2 3 4 5 6
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3 4 5 6
|
Grantee Code |
UZ7
|
1 2 3 4 5 6
|
Equipment Product Code |
CC600
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4 5 6
|
Name |
L**** Z****
|
1 2 3 4 5 6
|
Title |
Regulatory Specialist
|
1 2 3 4 5 6
|
Telephone Number |
346-2********
|
1 2 3 4 5 6
|
Fax Number |
631-6********
|
1 2 3 4 5 6
|
E-mail |
L******@zebra.com
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 5 6 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 6 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 6 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 06/02/2020 |
1 2 3 4 5 6 | 10/29/2019 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 5 6 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 5 6 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
1 2 3 4 5 6 | NII - Unlicensed National Information Infrastructure TX |
1 2 3 4 5 6 | DTS - Digital Transmission System |
1 2 3 4 5 6 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Customer Concierge |
1 2 3 4 5 6 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 4 5 6 | Modular Equipment Type | Does not apply |
1 2 3 4 5 6 | Purpose / Application is for | Class II Permissive Change |
1 2 3 4 5 6 | Original Equipment |
1 2 3 4 5 6 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 5 6 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 5 6 | Grant Comments | Output Power listed is the maximum combined conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Professional installation required. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
Class II Permissive Change: Adds a detachable antenna, and is evaluated when collocated with WWAN module FCC ID: N7NMC7455 and WLAN/BT module FCC ID: PD98265NG. Approval is limited to antennas evaluated with in this filing. |
1 2 3 4 5 6 | Output Power listed is the maximum combined conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Professional installation required. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. This device supports 20, 40 and 80 MHz bandwidth modes.
Class II Permissive Change: Adds a detachable antenna, and is evaluated when collocated with WWAN module FCC ID: N7NMC7455 and WLAN/BT module FCC ID: PD98265NG. Approval is limited to antennas evaluated with in this filing. |
1 2 3 4 5 6 | Output Power listed is the maximum combined conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Professional installation required. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. This device supports 20 and 40 MHz bandwidth modes.
Class II Permissive Change: Adds a detachable antenna, and is evaluated when collocated with WWAN module FCC ID: N7NMC7455 and WLAN/BT module FCC ID: PD98265NG. Approval is limited to antennas evaluated with in this filing. |
1 2 3 4 5 6 | Output Power listed is the maximum combined conducted output power. Professional installation/configuration required. This transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. This device supports 20 and 40 MHz bandwidth modes. |
1 2 3 4 5 6 | Output Power listed is the maximum combined conducted output power. Professional installation/configuration required. This transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. This device supports 20, 40 and 80 MHz modes. |
1 2 3 4 5 6 | Output Power listed is the maximum conducted output power. Professional installation/configuration required. This transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. |
1 2 3 4 5 6 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 5 6 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4 5 6
|
Firm Name |
Sporton International Inc.
|
1 2 3 4 5 6
|
Name |
A**** C********
|
1 2 3 4 5 6
|
Telephone Number |
88633********
|
1 2 3 4 5 6
|
Fax Number |
+886-********
|
1 2 3 4 5 6
|
E-mail |
a******@sporton.com.tw
|
|