all | frequencies |
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual 1 | Users Manual | 4.87 MiB | ||||
1 |
|
User Manual 2 | Users Manual | 3.59 MiB | ||||
1 |
|
User Manual Regulatory | Users Manual | 1.29 MiB | ||||
1 | External Photos | |||||||
1 | Cover Letter(s) | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | ID Label/Location Info | |||||||
1 | RF Exposure Info | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | User Manual 1 | Users Manual | 4.87 MiB |
RS507 Hands-Free Imager Product Reference Guide 72E-120802-04 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Copyright 2017 ZIH Corp. and/or its affiliates. All rights reserved. ZEBRA and the stylized Zebra head are trademarks of ZIH Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. COPYRIGHTS & TRADEMARKS: For complete copyright and trademark information, go to www.zebra.com/
copyright. WARRANTY: For complete warranty information, go to www.zebra.com/warranty. END USER LICENSE AGREEMENT: For complete EULA information, go to www.zebra.com/eula. Terms of Use Proprietary Statement This manual contains proprietary information of Zebra Technologies Corporation and its subsidiaries
(Zebra Technologies). It is intended solely for the information and use of parties operating and maintaining the equipment described herein. Such proprietary information may not be used, reproduced, or disclosed to any other parties for any other purpose without the express, written permission of Zebra Technologies. Product Improvements Continuous improvement of products is a policy of Zebra Technologies. All specifications and designs are subject to change without notice. Liability Disclaimer Zebra Technologies takes steps to ensure that its published Engineering specifications and manuals are correct; however, errors do occur. Zebra Technologies reserves the right to correct any such errors and disclaims liability resulting therefrom. Limitation of Liability In no event shall Zebra Technologies or anyone else involved in the creation, production, or delivery of the accompanying product (including hardware and software) be liable for any damages whatsoever
(including, without limitation, consequential damages including loss of business profits, business interruption, or loss of business information) arising out of the use of, the results of use of, or inability to use such product, even if Zebra Technologies has been advised of the possibility of such damages. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Revision History Changes to the original guide are listed below:
Change
-01 Rev A
-01 Rev B
-02 Rev A Date 10/2009 10/2011 3/2015 Release Add Chapter 7 Zebra rebranding Description 2 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Change
-03 Rev A
-04 Rev A Date 4/2017 11/2017 Description Correct LED indicator indications in Table 2. Add model number RS507X 3 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Table of Contents Copyright ........................................................................................................................................... 2 Terms of Use .................................................................................................................................... 2 Revision History ................................................................................................................................ 2 About This Guide Introduction ..................................................................................................................................... 12 Documentation Set ......................................................................................................................... 12 Model Configurations ...................................................................................................................... 12 Chapter Descriptions ...................................................................................................................... 13 Notational Conventions ................................................................................................................... 13 Related Documents ........................................................................................................................ 14 Service Information ......................................................................................................................... 14 Provide Documentation Feedback .................................................................................................. 14 Getting Started Introduction ..................................................................................................................................... 15 Unpacking ....................................................................................................................................... 15 Introduction ..................................................................................................................................... 15 Cordless Configuration Features .................................................................................................... 17 Corded Configuration Features ....................................................................................................... 18 Trigger Swivel Assembly - Change Trigger Position ................................................................. 19 Getting Started - Cordless Configuration ........................................................................................ 20 Charge the Battery .................................................................................................................... 20 Install the Battery ...................................................................................................................... 20 Remove the Battery .................................................................................................................. 20 Wearing the Imager ................................................................................................................... 20 Getting Started - Corded Configuration .......................................................................................... 21 Connect the Corded Adapter .................................................................................................... 21 Remove the Corded Adapter .................................................................................................... 21 Connect to a WT4090 Wearable Terminal ................................................................................ 22 Wearing the Imager ................................................................................................................... 22 Status Indications ............................................................................................................................ 23 Imager Standby Mode ..................................................................................................................... 24 Bluetooth Connection ...................................................................................................................... 24 Establish Bluetooth Connection ................................................................................................ 24 Restore Lost Bluetooth Connection .......................................................................................... 26 4 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Table of Contents Remove Bluetooth Connection ................................................................................................. 26 Pairing Bar Code Format .......................................................................................................... 26 Scan ................................................................................................................................................ 27 Scan Triggering Modes ............................................................................................................. 27 Aiming the Imager ..................................................................................................................... 28 Customize the Imager ..................................................................................................................... 29 Changing from Triggered to Triggerless Configuration ............................................................. 29 Changing Triggerless to Triggered Configuration ..................................................................... 29 Resetting the Imager ....................................................................................................................... 30 Warm Boot ................................................................................................................................ 30 Cold Boot .................................................................................................................................. 30 Clean Boot ................................................................................................................................ 30 SAC5070 8-Bay Battery Charger Introduction ..................................................................................................................................... 31 Unpacking the Charger ................................................................................................................... 31 Parts of the Charger ........................................................................................................................ 32 Installation ....................................................................................................................................... 33 Tabletop / Shelf Set Up ............................................................................................................. 33 Wall Mount ................................................................................................................................ 33 Inserting the Imager Battery in the Charger .................................................................................... 34 Charge the Battery .................................................................................................................... 35 Battery Age Test ............................................................................................................................. 35 Charge Status LED ................................................................................................................... 36 Troubleshooting & Maintenance Introduction ..................................................................................................................................... 37 Troubleshooting .............................................................................................................................. 37 Imager ....................................................................................................................................... 37 Charger ..................................................................................................................................... 38 Maintenance ................................................................................................................................... 39 Maintaining the Imager ................................................................................................................... 39 Comfort Pad Replacement ........................................................................................................ 39 Trigger Swivel Assembly Replacement ..................................................................................... 40 Triggerless Strap Holder Replacement ............................................................................................... 41 Finger Strap Replacement (Trigger Swivel Assembly) ............................................................. 42 Finger Strap Replacement (Triggerless Strap Holder) .............................................................. 44 Strap Buckle Replacement ........................................................................................................ 44 Field Replaceable Parts ............................................................................................................ 45 Cleaning the Imager .................................................................................................................. 46 Maintaining the Charger .................................................................................................................. 46 Operating conditions for the Charger ........................................................................................ 46 Handling the Charger ................................................................................................................ 46 Cleaning the Charger ................................................................................................................ 47 RS507 Update and Configuration Introduction ..................................................................................................................................... 48 Configuring the Imager ................................................................................................................... 48 5 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Table of Contents Introduction ............................................................................................................................... 48 Control Panel Application .......................................................................................................... 49 RSMSample Application ........................................................................................................... 50 Imager Attributes ....................................................................................................................... 53 Imager Motion and Proximity Configuration .............................................................................. 57
.................................................................................................................................................. 61 Real Time Logger ........................................................................................................................... 61 ScannerLog Application ......................................................................................................................... 62 Imager Firmware Update ................................................................................................................ 64 Required Equipment ................................................................................................................. 64 Updating the RS507 Firmware .................................................................................................. 65 Rapid Deployment Client ................................................................................................................ 67 Miscellaneous Imager Options Introduction ..................................................................................................................................... 70 Scanning Sequence Examples ....................................................................................................... 70 Errors While Scanning .................................................................................................................... 71 User Preferences/Miscellaneous Options Parameter Defaults ....................................................... 71 User Preferences ............................................................................................................................ 72 Set Default Parameter ............................................................................................................... 72 Parameter Bar Code Scanning ................................................................................................. 73 Beep After Good Decode .......................................................................................................... 74 Beeper Tone ............................................................................................................................. 75 Beeper Volume ......................................................................................................................... 76 Imager Activity Modes ............................................................................................................... 77 Picklist Mode ............................................................................................................................. 78 Fuzzy 1D Processing ................................................................................................................ 79 Decoding Illumination ................................................................................................................ 80 Low Battery Indication Cycle ..................................................................................................... 80 Bluetooth Disconnection Alert Control ...................................................................................... 81 Miscellaneous Scanner Parameters ............................................................................................... 83 Transmit Code ID Character ..................................................................................................... 83 Prefix/Suffix Values ................................................................................................................... 84 Scan Data Transmission Format ............................................................................................... 85 Scan Data Transmission Format (continued) ............................................................................ 87 FN1 Substitution Values ............................................................................................................ 87 Transmit No Read Message ................................................................................................... 88 Symbologies Introduction ..................................................................................................................................... 89 Scanning Sequence Examples ....................................................................................................... 89 Errors While Scanning .................................................................................................................... 90 Symbology Parameter Defaults ...................................................................................................... 90 UPC/EAN ........................................................................................................................................ 99 Enable/Disable UPC-A .............................................................................................................. 99 Enable/Disable UPC-E .............................................................................................................. 99 Enable/Disable UPC-E1 ............................................................................................................ 99 Enable/Disable EAN-8/JAN-8 ................................................................................................. 100 Enable/Disable EAN-13/JAN-13 ............................................................................................. 101 6 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Table of Contents Enable/Disable Bookland EAN ................................................................................................ 101 Decode UPC/EAN/JAN Supplementals .................................................................................. 102 User-Programmable Supplementals ....................................................................................... 105 UPC/EAN/JAN Supplemental Redundancy ............................................................................ 105 UPC/EAN/JAN Supplemental AIM ID Format ......................................................................... 106 Transmit UPC-A Check Digit ................................................................................................... 106 Transmit UPC-E Check Digit ................................................................................................... 107 Transmit UPC-E1 Check Digit ................................................................................................. 107 UPC-A Preamble ..................................................................................................................... 107 UPC-E Preamble ..................................................................................................................... 108 UPC-E1 Preamble ................................................................................................................... 109 Convert UPC-E to UPC-A ....................................................................................................... 110 Convert UPC-E1 to UPC-A ..................................................................................................... 111 EAN-8/JAN-8 Extend .............................................................................................................. 112 Bookland ISBN Format ........................................................................................................... 113 UCC Coupon Extended Code ................................................................................................. 114 ISSN EAN ............................................................................................................................... 114 Code 128 ...................................................................................................................................... 115 Enable/Disable Code 128 ....................................................................................................... 115 Set Lengths for Code 128 ....................................................................................................... 115 Enable/Disable GS1-128 (formerly UCC/EAN-128) ................................................................ 116 Enable/Disable ISBT 128 ........................................................................................................ 117 ISBT Concatenation ................................................................................................................ 118 Check ISBT Table ................................................................................................................... 119 ISBT Concatenation Redundancy ........................................................................................... 119 Code 39 ........................................................................................................................................ 120 Enable/Disable Code 39 ......................................................................................................... 120 Enable/Disable Trioptic Code 39 ............................................................................................. 120 Convert Code 39 to Code 32 .................................................................................................. 121 Code 32 Prefix ........................................................................................................................ 121 Set Lengths for Code 39 ......................................................................................................... 122 Code 39 Check Digit Verification ............................................................................................ 123 Transmit Code 39 Check Digit ................................................................................................ 123 Code 39 Full ASCII Conversion .............................................................................................. 124 Code 39 Buffering - Scan & Store ........................................................................................... 124 Code 39 Buffering - Scan & Store (continued) ........................................................................ 125 Code 93 ........................................................................................................................................ 127 Enable/Disable Code 93 ......................................................................................................... 127 Set Lengths for Code 93 ......................................................................................................... 127 Set Lengths for Code 93 (continued) ...................................................................................... 128 Code 11 ................................................................................................................................... 129 Code 11 ................................................................................................................................... 129 Set Lengths for Code 11 ......................................................................................................... 129 Code 11 Check Digit Verification ............................................................................................ 130 Transmit Code 11 Check Digits .............................................................................................. 132 Interleaved 2 of 5 (ITF) ................................................................................................................. 132 Enable/Disable Interleaved 2 of 5 ........................................................................................... 132 Set Lengths for Interleaved 2 of 5 ........................................................................................... 133 Set Lengths for Interleaved 2 of 5 (continued) ........................................................................ 134 I 2 of 5 Check Digit Verification ............................................................................................... 135 Transmit I 2 of 5 Check Digit ................................................................................................... 135 7 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Table of Contents Convert I 2 of 5 to EAN-13 ...................................................................................................... 136 Discrete 2 of 5 (DTF) .................................................................................................................... 136 Enable/Disable Discrete 2 of 5 ................................................................................................ 136 Set Lengths for Discrete 2 of 5 ................................................................................................ 137 Set Lengths for Discrete 2 of 5 (continued) ............................................................................. 138 Codabar (NW - 7) .................................................................................................................... 139 Enable/Disable Codabar ......................................................................................................... 139 Set Lengths for Codabar ......................................................................................................... 139 Set Lengths for Codabar (continued) ...................................................................................... 140 CLSI Editing ............................................................................................................................ 140 NOTIS Editing ......................................................................................................................... 141 MSI ................................................................................................................................................ 142 Enable/Disable MSI ................................................................................................................. 142 Set Lengths for MSI ................................................................................................................ 142 Set Lengths for MSI (continued) ............................................................................................. 143 MSI Check Digits ..................................................................................................................... 143 Transmit MSI Check Digit(s) ................................................................................................... 144 MSI Check Digit Algorithm ...................................................................................................... 145 Chinese 2 of 5 ............................................................................................................................... 145 Enable/Disable Chinese 2 of 5 ................................................................................................ 145 Matrix 2 of 5 .................................................................................................................................. 146 Enable/Disable Matrix 2 of 5 ................................................................................................... 146 Set Lengths for Matrix 2 of 5 ................................................................................................... 147 Matrix 2 of 5 Redundancy ....................................................................................................... 148 Matrix 2 of 5 Check Digit ......................................................................................................... 149 Transmit Matrix 2 of 5 Check Digit .......................................................................................... 149 Inverse 1D ..................................................................................................................................... 149 Postal Codes ................................................................................................................................. 150 US Postnet .............................................................................................................................. 150 US Planet ................................................................................................................................ 151 Transmit US Postal Check Digit .............................................................................................. 151 UK Postal ................................................................................................................................ 152 Transmit UK Postal Check Digit .............................................................................................. 152 Japan Postal ........................................................................................................................... 153 Australian Postal ..................................................................................................................... 154 Netherlands KIX Code ........................................................................................................... 154 USPS 4CB/One Code/Intelligent Mail ..................................................................................... 155 UPU FICS Postal .................................................................................................................... 155 GS1 DataBar ................................................................................................................................. 155 GS1 DataBar-14 ...................................................................................................................... 156 GS1 DataBar Limited .............................................................................................................. 156 GS1 DataBar Expanded .......................................................................................................... 157 Convert GS1 DataBar to UPC/EAN ........................................................................................ 157 Composite ..................................................................................................................................... 158 Composite CC-C ..................................................................................................................... 158 Composite CC-A/B .................................................................................................................. 158 Composite TLC-39 .................................................................................................................. 159 UPC Composite Mode ............................................................................................................ 159 Composite Beep Mode ............................................................................................................ 160 GS1-128 Emulation Mode for UCC/EAN Composite Codes ................................................... 160 2D Symbologies ............................................................................................................................ 161 8 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Table of Contents Enable/Disable PDF417 .......................................................................................................... 161 Enable/Disable MicroPDF417 ................................................................................................. 161 Code 128 Emulation ................................................................................................................ 161 Data Matrix .............................................................................................................................. 163 Data Matrix Inverse ................................................................................................................. 163 Maxicode ................................................................................................................................. 164 QR Code ................................................................................................................................. 164 QR Inverse .............................................................................................................................. 165 MicroQR .................................................................................................................................. 165 Aztec ....................................................................................................................................... 166 Aztec Inverse .......................................................................................................................... 166 Redundancy Level ........................................................................................................................ 167 Redundancy Level 1 ............................................................................................................... 167 Redundancy Level 2 ............................................................................................................... 167 Redundancy Level 3 ............................................................................................................... 167 Redundancy Level 4 ............................................................................................................... 168 Security Level ............................................................................................................................... 168 Intercharacter Gap Size .......................................................................................................... 169 Report Version .............................................................................................................................. 170 Macro PDF Features ..................................................................................................................... 171 Flush Macro Buffer .................................................................................................................. 171 Abort Macro PDF Entry ........................................................................................................... 171 Bluetooth Connection Using HID and SPP Profiles Introduction ................................................................................................................................... 172 RS507 to Computer Bluetooth Connection Modes ....................................................................... 172 RS507 Important hardware features ............................................................................................. 173 Refreshing Boot Choices .............................................................................................................. 173 HID (Human Interface Device) Mode ....................................................................................................... 174 How to change to HID mode ................................................................................................... 174 How to format the scanned data ............................................................................................. 175 How to pair and connect with a computer running Windows 7 SP1 ............................................. 175 How to pair and connect with a computer running Windows XP SP3 and Bluetooth 2.1 ........ 177 How to pair and connect with other devices ............................................................................ 181 Reconnecting .......................................................................................................................... 181 How to demonstrate HID connection with a computer ............................................................ 181 Country keyboard type change ............................................................................................... 182 Connecting multiple RS507 into single device ........................................................................ 183 Using random PIN code .......................................................................................................... 183 How to return to SSI (SCAN) mode ........................................................................................ 187 Serial Port Profile (SPP) Mode ..................................................................................................... 188 How to change to SPP mode .............................................................................................................. 188 How to format the scanned data the data ............................................................................... 188 How to pair and connect with a computer running Windows 7 SP1 ........................................ 189 How to pair and connect with a computer running Windows XP SP3 ..................................... 195 SPP connection with RS507 as a Slave ................................................................................. 199 How to pair and connect with other devices ............................................................................ 202 Reconnecting .......................................................................................................................... 203 How to demonstrate SPP connection with a computer ........................................................... 203 Connecting multiple RS507 into single device ........................................................................ 204 9 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Table of Contents How to return to SSI (SCAN) mode ........................................................................................ 204 Switching between SSI (SCAN), HID and SPP ....................................................................... 205 Firmware upgrade ......................................................................................................................... 207 Upgrading using a computer and the PC Tool application ...................................................... 207 Retrieving the RS507 log file ........................................................................................................ 211 Bluetooth Bar Codes ................................................................................................................................... 215 Bluetooth Authentication Control ............................................................................................. 215 Bluetooth Automatic Reconnection Control ............................................................................ 216 Bell Indication Control ............................................................................................................. 218 Bluetooth Profile Control ......................................................................................................... 223 Bluetooth Pairing Control ........................................................................................................ 224 Specifications Technical Specifications ............................................................................................................... 225 Imager ..................................................................................................................................... 225 Charger ................................................................................................................................... 228 Standard Default Parameters Standard Default Parameters Table ............................................................................................. 229 Programming Reference Symbol Code Identifiers ................................................................................................................ 236 AIM Code Identifiers ..................................................................................................................... 237 Sample Bar Codes Code 39 ........................................................................................................................................ 242 UPC/EAN ...................................................................................................................................... 242 UPC-A, 100% .......................................................................................................................... 242 EAN-13, 100% ........................................................................................................................ 243 Code 128 ...................................................................................................................................... 243 Interleaved 2 of 5 .......................................................................................................................... 243 GS1 DataBar-14 ........................................................................................................................... 243 PDF417 ......................................................................................................................................... 244 Data Matrix .................................................................................................................................... 244 Maxicode ....................................................................................................................................... 244 QR Code ....................................................................................................................................... 245 US Postnet .................................................................................................................................... 245 UK Postal ...................................................................................................................................... 245 Numeric Bar Codes Numeric Bar Codes ....................................................................................................................... 246 Cancel ........................................................................................................................................... 247 Glossary 10 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Table of Contents Index 11 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY About This Guide Introduction This Product Reference Guide provides additional information that is not covered by the Quick Reference Guide and is helpful for application developers and customers alike. The Product Reference Guide provides information on operating the Imager for the first time, using the Imager, resetting and capturing data. The guide also covers issues such as charging and testing the Imager battery, troubleshooting, maintenance, firmware update and configuration of the Imager. Sample bar codes are provided for configuring and testing the Imager. This guide applies to Model Numbers RS507 and RS507X. Documentation Set The documentation set for the RS507 is divided into guides that provide information for specific user needs. RS507 Hands-Free Imager Quick Start Guide - describes how to use the Imager. Advanced Data Formatting Programmer Guide - describes how to customize data before transmission SAC5070 8-Bay Battery Charger Quick Reference Guide - describes how to use the Imager charger. EMDK Help File - provides API information for writing applications. to the host device. Model Configurations This guide covers the following model configurations:
RS507-IM2xxxxSTWR -Triggered RS507 with standard battery RS507-IM2xxxxSNWR - Triggerless RS507 with standard battery RS507-IM2xxxxENWR -Triggerless RS507 with extended battery RS507-IM2xxxxCTWR - Corded and Triggered RS507 For shipping configuration of each model option, refer to Unpacking on page 15. 12 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY About This Guide Chapter Descriptions Topics covered in this guide are as follows:
Getting Started provides information on getting the Imager up and running for the first time, basic instructions for using the Imager and instructions for resetting the Imager and capturing data. SAC5070 8-Bay Battery Charger provides information on charging and testing the Imager battery. Troubleshooting & Maintenance provides troubleshooting, cleaning, part replacement and technical specifications for the Imager. RS507 Update and Configuration provides instructions for firmware update and configuration of the Imager operation. Miscellaneous Imager Options provides information on programming the Imager to perform various functions, or activating different features. Symbologies details symbology features and provides programming bar codes for selecting these features. Bluetooth Connection Using HID and SPP Profiles describes the Bluetooth connection modes of the RS507 to a personal computer and non-Zebra terminals. Specifications provides Imager and charger technical specifications.
<em_Emphasis>Appendix , Standard Default Parameters provides a sample of bar codes used for configuring the Imager.
<em_Emphasis>Appendix , Programming Reference provides symbol code characters.
<em_Emphasis>Appendix , Sample Bar Codes provides sample bar codes for Imager testing.
<em_Emphasis>Appendix , Numeric Bar Codes provides a sample of numeric bar codes. Notational Conventions The following conventions are used in this document:
RS507 refers to the Zebra RS507 Hands-Free Imager. Imager refers to the Zebra RS507 Hands-Free Imager. Terminal refers to the Wearable Terminal WT4090 or any mobile computer connected to the Imager. Charger refers to the SAC5070 8-Bay Battery Charger of the RS507. Bold text is used to highlight the following:
Dialog box, window and screen names Drop-down list and list box names Check box and radio button names Bullets () indicate:
Icons on a screen Key names on a keypad Button names on a screen. Action items Lists of alternatives Lists of required steps that are not necessarily sequential. 13 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY About This Guide Sequential lists (e.g., those that describe step-by-step procedures) appear as numb lists. Related Documents SAC5070 8-Bay Battery Charger Quick Reference Guide, p/n 72-115989-01-xx RS507 Hands-Free Imager Quick Start Guide, p/n 72-115987-01-xx WT4090 Quick Start Guide p/n 72-86717-02 -xx as well as other supported terminals'
Enterprise Mobility Developer Kit (EMDK for C and EMDK for .NET), available at: www.zebra.com/support. For the latest version of this guide and all guides, go to: www.zebra.com/support. Service Information If you have a problem with your equipment, contact Zebra Support for your region. Contact information is available at:
www.zebra.com/support. When contacting Support, please have the following information available:
Serial number of the unit Model number or product name Software type and version number The following information should be available when reporting a problem:
Customer name Application used Configuration (corded/cordless, trigger/triggerless, standard or extended battery) RS507 or Cradle version number RS507 CAB file version and OEM version Use the ScannerLog Application on page 62 to retrieve and E-mail the RS507 log to the support representative Occurrence (always, once out of 10 attempts, etc) Suggested steps to reproduce the problem Zebra responds to calls by E-mail, telephone or fax within the time limits set forth in support agreements. If your problem cannot be solved by Zebra Support, you may need to return your equipment for servicing and will be given specific directions. Zebra is not responsible for any damages incurred during shipment if the approved shipping container is not used. Shipping the units improperly can possibly void the warranty. If you purchased your business product from a Zebra business partner, contact that business partner for support. Provide Documentation Feedback If you have comments, questions, or suggestions about this guide, send an email to EVM-Techdocs@zebra.com. 14 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Getting Started Introduction This chapter describes the features of the RS507 Hands-Free Imager and explains how to install and charge the battery, capture data and reset the Imager. Unpacking Carefully remove all protective material from around the equipment and save the shipping container for later storage and shipping. After opening the shipping box, inspect the contents. You should have received the following:
Table 1 RS507 Shipping Configuration Model Options Model Description Standard Battery Extended Battery Corded Adapter Trigger Quick Reference Guide RS507-IM2xxxxSTW R RS507-IM2xxxxSNW R RS507-IM2xxxxENW R RS507-IM2xxxxCTW R Triggered RS507 with standard battery Triggerless RS507 with standard battery Triggerless RS507 with extended battery Corded and Triggered RS507 x x x x x x x x x x Inspect the equipment for damage. If you are missing any equipment or if you find any damaged equipment, contact the Zebra Support immediately. See <em_Emphasis>Service Information on page 14 for contact information. Introduction The RS507 Hands-Free Imager (also referred to as the Imager) is a wearable bar code scan solution for both 1D and 2D bar code symbologies. The Imager is also compatible with a wide range of mobile computers communicating over Bluetooth. 15 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Getting Started The Imager is designed for a wide range of applications from management of products in a warehouse, to processing deliveries at a courier facility to processing prescription drugs at the pharmaceutical distribution center. The Imager uses camera-based scanning technology, designed to offer flexible hands-free operation with ergonomic comfort for right or left hand users. The Imager can be operated in both manual and auto-triggering modes. Auto-triggering is a patent-pending Interactive Sensing Technology combining motion and proximity sensing for triggering the Imager. The Imager is built to last and rated for indoor and outdoor daily use in scan-intensive environments. Built on a magnesium chassis, the Imager offers the durability associated with the most rugged mobile computers. 16 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Getting Started Cordless Configuration Features Figure 1 RS507 Cordless Configuration Features Triggered Configuration Imager Window Comfort Pad Battery Battery Release Latch Trigger Swivel Assembly Finger Strap Scan Trigger Asset Control Label Left Scan LED Beeper Right Scan LED Restore Key Strap Buckle Finger Strap Triggerless Configuration Triggerless Strap Holder 17 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Getting Started Corded Configuration Features Figure 2 RS507 Corded Configuration Features Interface Cable Connector to WT4090 Release Latch Imager Window Comfort Pad Finger Strap Corded Adapter Trigger Swivel Assembly Scan Trigger Asset Control Label Restore Key Strap Buckle Finger Strap Left Scan LED Beeper Right Scan LED 18 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Getting Started Trigger Swivel Assembly - Change Trigger Position The Imager is worn on the index and middle fingers, and triggered with the thumb. The Trigger Swivel Assembly of the Imager rotates to provide left-hand or right-hand use. To change the position of the Trigger:
1. From the bottom of Imager, hold and pull the Comfort Pad off the Imager. NOTE: When removing the Comfort Pad off the Imager, It is not necessary to remove the Finger Strap from the Trigger Swivel Assembly. Figure 3 Change Trigger Position - Removal of Finger Strap and Comfort Pad Finger Strap Trigger Swivel Assembly Comfort Pad Strap Buckle 2. Determine whether the Imager is used on the right or left hand and rotate the Trigger Swivel Assembly. Figure 4 Change Trigger Swivel Assembly Position Trigger Swivel Assembly Scan Trigger CAUTION:The Trigger Swivel Assembly only rotates 180 around the front of the scan assembly. Do not rotate the Trigger Swivel Assembly past the designed stops. 3. Rotate the Trigger Swivel Assembly so that the Scan Trigger is positioned next to the thumb when the Imager is placed on the index and middle fingers. 4. Position the Comfort Pad onto the Imager. 5. Press the Comfort Pad onto the Imager. When properly installed, the Comfort Pad locks into place. 6. Insert the Finger Strap into the Strap Buckle. 19 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Getting Started Getting Started - Cordless Configuration Charge the Battery Before using the Imager, charge the battery. The SAC5070 8-Bay Battery Charger supports both standard and extended capacity batteries. To charge the Imager battery, refer to the SAC5070 8-Bay Battery Charger Quick Reference Guide, p/n 72-115989-01 available at: www.zebra.com/support and search for 'SAC5070'. Install the Battery 1. Align the battery on top of the Imager. 2. Push the battery all the way into the Locking Slots of the Imager. 3. Firmly press the battery into the Imager until a click is heard ensuring the Battery Release Latch is fully engaged with the Imager. Figure 5 Install the Battery Battery Release Latch Battery Locking Slots Remove the Battery 1. Hold the Imager in one hand. 2. Press the Battery Release Latch. 3. Pull up the battery to release it from the Locking Slots of the Imager. Wearing the Imager 1. Slide the Imager onto the index and middle fingers with the Scan Trigger next to the thumb. 2. Tighten the Finger Strap. NOTE: When using the Imager for the first time, press and release the Scan Trigger to enable the manual triggering mode (this operation disables the default auto triggering mode). 20 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Getting Started Figure 6 Wearing the Imager - Cordless Adapter Finger Strap aaaaaaaaaaaaaaa aaaaaaaaaaaaaaa aaaaaaaaaaaaaaa aaaaaaaaaaaaaaa aaaaaaaaaaaaaaa aaaaaaaaaaaaaaa aaaaaaaaaaaaaaa aaaaaaaaaaaaaaa aaaaaaaaaaaaaaa aaaaaaaaaaaaaaa aaaaaaaaaaaaaaa aaaaaaaaaaaaaaa aaaaaaaaaaaaaaa aaaaaaaaaaaaaaa aaaaaaaaaaaaaaa aaaaaaaaaaaaaaa aaaaaaaaaaaaaaa Getting Started - Corded Configuration In order to start using the Imager you must install the Corded Adapter. Connect the Corded Adapter To connect the Corded Adapter:
1. Align the Corded Adapter on top of the Imager. 2. Support the bottom side of the Imager and push the Corded Adapter all the way into the Locking Slots of the Imager. 3. Firmly press the Corded Adapter into the Imager until a click is heard ensuring the Adapter Release Latch is fully engaged with the Imager. Figure 7 Connect Corded Adapter Adapter Release Latch Corded Adapter Locking Slots Remove the Corded Adapter To remove the Corded Adapter:
1. Hold the Imager in one hand. 2. Press the Adapter Release Latch. 3. Pull up the Corded Adapter to release it from the Locking Slots of the Imager. 21 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Getting Started Connect to a WT4090 Wearable Terminal The Imager connects to the Wearable Terminal and mounts on the fingers. Figure 8 Connecting and Disconnecting to a Wearable Terminal Interface Cable Connector WT4090 Interface Connector Disconnect Button 1 2 To connect the Imager to the terminal:
1. On the terminal, remove the cover from the WT4090 Interface Connector. 2. Connect the Interface Cable Connector of the Imager to the WT4090 Interface Connector. To disconnect the Imager from the terminal:
1. Press the Disconnect Button on the Interface Cable Connector. 2. Pull the Interface Cable Connector out of the WT4090 Interface Connector. Wearing the Imager To wear the Imager:
1. Slide the Imager onto the index and middle fingers with the Scan Trigger next to the thumb (see Figure 9). Figure 9 Wear the Imager - Corded Adapter Scan Trigger 2. Tighten the Finger Strap. 22 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Getting Started Figure 10 Wear the Corded Adapter Imager - Finger Strap Finger Strap 4tQ aaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaa NOTE: When using the Imager for the first time, press and release the Scan Trigger to enable the manual triggering mode (this operation disables the default auto triggering mode). Status Indications The Imager has two Scan LEDs that provide identical indications. The Imager is also equipped with a beeper that issues different beep sequences and patterns to indicate status. Table 2 defines the LED and beep sequences indications that occur during normal operation and bar code scanning. Table 2 Status Indications No. 1. None LED High/low Beep Indication Description Bluetooth communication is disconnected due to:
host device is powered off. host device Bluetooth is off. Bluetooth un-pair bar code scanned by the RS507. Bluetooth Disconnect bar code scanned by the RS507. RS507 is out of Bluetooth range with the host device. Attempting to connect over Bluetooth. Imager is connected over Bluetooth. Properly decoded scan of Bluetooth pairing bar code. 2. 3. 4. Short green flashes None None None Low/high High/low/high/low 23 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Getting Started Table 2 Status Indications 5. None Long low/ long high/
6. None Long low/ long high/ Long low/
long high/
7. 8. 9. 10. One green flash None High 4 long beeps Red flash Long red flash followed by a green flash 2 short beeps every 15 seconds High/low High/low Bluetooth connection attempt failed. If there is no acknowledgment from the host device. Example: Bluetooth on the host device is off. Bluetooth connection attempt is rejected. When the RS507 tries to connect to the host and the host rejects the connection. Example: There is already a successful Bluetooth connection in the host device and it unable to create a new connection. Proper scanning indication. No Bluetooth communication after re-connection failure. Low battery. Clean Boot was performed successfully. NOTE: When the Imager is connected by corded configuration, only Proper scanning indication and Clean Boot was perform successfully status events are indicated. Imager Standby Mode To save battery power, the Imager goes into Standby when not active. The Image resumes functionality when:
Bluetooth data is received from the mobile computer (in cordless configuration) Scan trigger is pressed Restore key is pressed Motion is detected (in cordless configuration) Incoming data from mobile computer is sensed (in corded configuration). Bluetooth Connection Establish Bluetooth Connection To establish Bluetooth connection with a mobile computer:
1. Ensure that the Imager is within a range of 10 meters (30 feet) from the mobile computer. 2. 3. Launch the Bluetooth Device (BD) address application (see Figure 11) from the mobile computer. Most BD Install the battery in the Imager. Address applications display a pairing bar code image on the screen of the mobile computer. 24 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Getting Started NOTE: To find the BD address application tap the Start button and select Programs > Display_BD_Address or Start
> Programs > BT Information and then tap the Generate Local BD Address Barcode button to display the BD address bar code. Figure 11 Icon of Bluetooth Device (BD) Address Application Bluetooth Device (BD) address icon on WT4090 Application screen Bluetooth Device (BD) address icon on MC909X Demo screen Bluetooth Device (BD) address icon on Windows Mobile Programs screen 4. Scan the pairing bar code on the mobile computer screen (see Figure 12) or a provided pairing label. When scanning, the Imager emits one string of high/low/high/low beeps. NOTE: To create printed pairing bar code label, refer to Pairing Bar Code Format on page 26. Figure 12 Pairing Bar Code Example as Shown on the Mobile Computer Screen 5. The Scan LED starts flashing green indicating that the Imager is attempting to establish connection with a mobile computer. NOTE:
You may also need to set the authentication and encryption to Enabled. If the Imager default PIN code is required for establishing connection, enter the following code: "12345". 6. When connection is established, the Scan LED turns off and the Imager emits one string of low/high beeps. The Imager is connected and ready for scanning. NOTE: When replacing the Imager battery, the Imager memory retains the pairing information of the last paired mobile computer. 25 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Getting Started Restore Lost Bluetooth Connection The Imager maintains Bluetooth communication with a mobile computer within a range of 10 meters (30 feet). When the Imager fails to establish connection or connection is lost during operation, the Imager emits one string of high/low beeps. To reestablish the Bluetooth connection with a mobile computer:
1. Ensure that the Imager is within a range of 10 meters (30 feet) from the mobile computer. 2. Ensure that the mobile computer is on and awake (not in Suspend mode). 3. The Imager automatically attempts reconnecting to the mobile computer for 30 seconds (Scan LED flashes green). If automatic re-connection fails, verify that the Imager is within Bluetooth range and briefly press the Restore Key on the Imager to reconnect. NOTE: You can also reconnect by scanning a pairing bar code from the mobile computer screen or provided label. When scanning, the Imager emits one string of high/low/high/low beeps. 4. The Scan LED starts flashing green indicating that the Imager is attempting to establish connection with a mobile computer. The Scan LED turns off and the Imager emits one string of low/high beeps indicating that the Imager is connected and ready for scanning. Remove Bluetooth Connection Remove Bluetooth connection to allow the Imager to connect to another mobile computer or to enable the a mobile computer to accept the connection from another Imager. NOTE: Removing Bluetooth connection is only required if the Imager is configured to auto-connect upon power-up (permanent pairing is enabled) and has to be paired with a different mobile computer. To remove Bluetooth connection:
1. Scan an un-pairing bar code for disconnecting the Imager from the mobile computer. Figure 13 Un-pairing Bar Code 2. The Imager emits one string of high/low beeps indicating that Bluetooth communication with the mobile computer is disconnected. Pairing Bar Code Format In order to pair the Imager with a mobile computer over Bluetooth, a pairing bar code must be created. You can use the Display_BD_Address application on the mobile computer, or create and print a pairing bar code label. To create a pairing bar code label, the Bluetooth address of the mobile computer should be available (refer to the mobile computer user guide). Pairing bar codes are Code 128 or Data Matrix symbologies formatted as follows:
<Fun3>Bxxxxxxxxxxxx Where xxxxxxxxxxxx represents the 12-character Bluetooth address. 26 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Getting Started Pairing Bar Code Example If the mobile computer to which the Imager connects has a Bluetooth address of 11:22:33:44:55:66, then the pairing bar code is:
Figure 14 Creating a Pairing Bluetooth Bar Code Paring Bar Code Content: <Fnc 3> B + Bluetooth Address Scan The Imager uses digital camera technology to take an image of a bar code and software decoding algorithms are executed to extract the bar code data from the image. Scan Triggering Modes Manual Triggering (Triggered models only) 1. Launch a scanning software application on the mobile computer. 2. Position the Imager approximately 22.8 cm (9 inches) from a bar code and press the Scan Trigger. Position the cross hair laser beam to cover the bar code. The Imager takes a digital picture (image) of the bar code and stores it in memory for decoding. NOTE: After battery is inserted or a corded adaptor is connected (on both sides), the first trigger press disables the auto triggering mode. 3. One green flash of the LEDs is given and a high beep sounds to indicate that the bar code was properly decoded. NOTE:
the mobile computer. In some configurations proper decoding of a bar code is indicated by the software application running on Auto-triggering (Triggerless models only) The Imager is provided with auto-triggering capability. In auto-triggering mode, both motion and proximity sensors are used to trigger the Imager when the user intends to scan a bar code. With auto-triggering activated, the Imager automatically scans when motion stops and a bar code is placed within the depth of field of the Imager. The Imager scans the bar code and turns off to conserve power. To scan a bar code in auto-triggering mode:
1. Position the Imager approximately 22.8 cm (9 inches) from a bar code. 2. Aim at the bar code. 3. The Imager takes a picture (image) of the bar code and stores it in memory for decoding. 27 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Getting Started 4. One green flash of the Scan LEDs and a high beep indicates that a bar code was properly decoded. NOTE:
the mobile computer. In some applications, proper detection of a bar code is indicated by a software application running on Aiming the Imager The aiming pattern of the Imager is a cross hair laser beam with bright center dot (see Figure 15). The virtual rectangle made by the cross hair reflects the field of view of the Imager. The aiming pattern is used to position the bar code within the field of view. Figure 15 Cross Hair Laser Beam Cross hair laser beam Virtual rectangle made by the cross hair laser beam Enter the symbol in any orientation within the virtual rectangle made by the cross hair laser beam, making use of its omnidirectional reading capability within the entire field of view. Figure 16 Symbol Scan Orientation 2D Bar Code Symbol 1D Bar Code
@
4 3 2 1
@
Aiming pattern Pattern The Imager can also read a bar code presented within the aiming pattern but not centered (see the top bar codes on Figure 17). The bar codes marked with X in Figure 17, however, show bar code aiming that may result in no decode. When using the application on your mobile computer in Pick List mode, the Bright Center Dot can be positioned anywhere on the symbol (see Figure 15).The top examples in Figure 17 show acceptable aiming options, while the bottom examples can not be decoded. 28 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Getting Started Figure 17 Acceptable Aiming Options 0 1 2 3 4 5 0 1 2 3 4 5 0 1 2 3 4 5 0 1 2 3 4 5 The aiming pattern is smaller when the Imager is closer to the symbol and larger when it is farther from the symbol. Scan symbols with smaller bars or elements (mil size) closer to the Imager and those with larger bars or elements
(mil size) farther from the Imager. 1. Hold the Imager between two and eleven inches from the bar code (depending on the bar code density). NOTE: When a symbol is under transparent plastic or on a mobile computer screen, it is recommended to use a tilt (pitch) or skew scan angle to minimize reflection. 2. Press the Scan trigger. The aiming pattern illuminates red indicating that the laser is on. One green flash of the Scan LED and a high beep indicates that a bar code was properly decoded. Customize the Imager Changing from Triggered to Triggerless Configuration To change from Triggered to Triggerless configuration:
1. Remove the Comfort Pad (see Comfort Pad Replacement on page 39). 2. Remove the Trigger Swivel Assembly (see Trigger Swivel Assembly Replacement on page 40). 3. 4. 5. Perform a cold boot (see Cold Boot on page 30). Install the Triggerless Strap Holder (see Triggerless Strap Holder Replacement on page 41). Install the Comfort Pad (see Comfort Pad Replacement on page 39). Changing Triggerless to Triggered Configuration To change from Triggerless to Triggered configuration:
1. Remove the Comfort Pad (see Comfort Pad Replacement on page 39). 2. Remove the Triggerless Strap Holder (see Triggerless Strap Holder Replacement on page 41). 3. 4. 5. Perform a cold boot (see Cold Boot on page 30). Install the Trigger Swivel Assembly (see Trigger Swivel Assembly Replacement on page 40). Install the Comfort Pad (see Comfort Pad Replacement on page 39). 29 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Getting Started 6. Press and release the Scan Trigger to enable the manual triggering mode (this operation disables the default Triggerless mode). Resetting the Imager If the Imager stops responding to input, reset it. There are three reset functions, warm boot, cold boot and clean boot. Perform a warm boot first. If the Imager still does not respond, perform a cold boot. Perform clean boot to restore the Imager to its factory default configuration. Warm Boot To perform warm boot, press and hold the Restore Key for more than six seconds. Cold Boot Cold boot restores the Imagers operation by resetting its software. To perform cold boot, remove and re-insert the battery into the Imager. When using a corded Imager model with WT4090, remove and reconnect the interface cable that connects between the Imager and the WT4090. Clean Boot Clean Boot restores the Imager to its factory default configuration. To perform clean boot:
1. Remove battery or disconnect the Corded Adapter. 2. Press and hold the Restore Key. 3. 4. Continue to press and hold the Restore Key for about five seconds until a chirp is heard and the Scan LEDs Insert the battery or Corded Adapter into the Imager. flash green. The Imager is now in its factory default configuration. NOTE: The factory default configuration is set in the factory or the service center. These parameters are unique for each Imager and cannot be changed. The Factory default configuration includes: Imager serial number, Bluetooth Device (BD) address, model number, production date and proximity calibration. 30 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY SAC5070 8-Bay Battery Charger Introduction The SAC5070 8-Bay Battery Charger is an accessory for the RS507 Hands-free Imager and provides a quick way to recharge the Lithium-ion battery that provide power for the RS507 Hands-Free Imager. One charger can hold up to eight batteries at a time. The 8-Bay Battery Charger supports both standard and extended capacity batteries. The Charger may only be used indoors. Unpacking the Charger After opening the shipping box, inspect the contents. You should have received the following:
Model Description SAC5070-800C R SAC5070-801C R USA model International model 8-Bay Battery Charger Power supply AC Line Cord Quick Start Guide x x x x x
*
x x
* For AC line cord, contact the Zebra representative in your country. Inspect the equipment for damage. If you are missing any equipment or if you find any damaged equipment, contact Zebra Support immediately. 31 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY SAC5070 8-Bay Battery Charger Parts of the Charger Figure 18 Parts of the Charger Charger Front RS507 Imager Rest Compartment Batteries Age Test Button Charge Status LED Charging Bay Asset Control Label Charger Back M4 Screw Inserts (X4)
(Screws not Included) Wall Mount Hole (X4) Power Supply Cable Duct M4 Screw Inserts (X4)
(Screws not Included) Power Supply Connector Power Supply Cable Duct Service Port Door
(Do not open - for service use only) 32 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY SAC5070 8-Bay Battery Charger Installation Tabletop / Shelf Set Up To set the Charger on a tabletop or shelf:
1. Place the Charger and the Power Supply Unit on a tabletop or shelf. NOTE: When required, use the screw inserts at the back and base to secure the Charger to the tabletop or shelf surface. 2. Connect the Power Supply Cable to the power connector on the back of the Charger. 3. Use the Power Supply Cable Duct, on the back of the Charger, to route the Power Supply Cable to the left or right side of the Charger. 4. Connect the AC plug of the AC Power Cord to a standard electrical outlet. Figure 19 Charger Installation Power Supply Cable Duct 100-240 VAC, 50-60 Hz Outlet AC Power Cord Power Supply Cable Power Supply Unit Wall Mount WARNING: For safe mounting, it is essential to use wall anchors appropriate to the wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. To mount the Charger on a wall:
1. Mark the screw location on the wall. 33 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY SAC5070 8-Bay Battery Charger 2. Use four screws to mount the Charger to a wall. Be sure to use additional wall mounting hardware, as needed, for safe mounting according to the wall type. 3. Connect the power supply cable to the power connector on the back of the Charger (see Figure 20). 4. Use the Power Supply Cable Duct, on the back of the Charger, to route the Power Supply Cable to the left or right side of the Charger. 5. Place the Power Supply Unit on a shelf or tabletop. 6. Connect the AC plug of the AC Power Cord to a standard electrical outlet. Figure 20 Wall Mounting of Charger 220 mm (8.6 inches) 38 mm (1.5 inches) 5 mm
(0.19 inches) 10 mm
(0.39 inches) Inserting the Imager Battery in the Charger The Charger supports both standard and extended capacity batteries. 34 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY SAC5070 8-Bay Battery Charger Figure 21 Inserting the Imager Battery into the Charger Charger Bay Standard Battery Charge the Battery CAUTION:Only Lithium-ion batteries that have been designed for use with the RS507 Hands-free Imager can be recharged by the Charger. Do not attempt to recharge other types of rechargeable batteries or any type of batteries. Doing so could destroy those batteries and damage the Charger. NOTE: Batteries should be charged within the 0C (+32F) and +40C (+104F) ambient temperature range. To charge the battery(s):
1. Insert the battery(s) into the 8-Bay Battery Charger so that the contacts of the battery are first to enter, facing down, gently. Do not use excessive force. 2. The 8-Bay Battery Charger starts to charge automatically. On each bay, the flashing amber Charge Status LED (see Figure 18) indicates the charge status. A full charge of a depleted battery takes up to four hours. The Charge Status LED lights solid amber when the battery is fully charged. Battery Age Test The battery age test checks the battery capacity when fully charged. A worn-out battery is considered to have less than 80% of its nominal capacity. The battery test is simultaneously performed for all batteries inserted into the charger. It is recommended to perform battery age testing once a month. The age test may take up to 16 hours. NOTE: A battery removed during test and re-inserted is excluded from the test but continues normal charging. 35 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY SAC5070 8-Bay Battery Charger To test the battery(s):
1. 2. Press and hold the Test Button for approximately 3 seconds until the Charge Status LED of each active bay Insert one or more batteries into Charging Bay(s). flashes green. 3. Refer to the table below when the indication of the Charge Status LED changes. Charge Status LED The Charge Status LEDs show the charge status of each Charging Bay:
Table 3 Charge LED - Status Indications LED Indication Flashing amber Solid amber Flashing green Flashing red/green Solid green Solid red Flashing red Status Charging in progress. Charging is completed. Battery age testing in progress. Defective battery or error in charging; re-insert the battery into the bay. Battery age test and charge are completed. Battery is good. Battery age test and charge are completed. Battery capacity is marginal. Battery age test and charge are completed. Battery is worn out. 36 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Troubleshooting &
Maintenance Introduction This chapter provides suggested Imager and Charger troubleshooting and maintenance. Troubleshooting Imager Table 4 Imager Troubleshooting Problem Laser aiming pattern does not display when pressing the Scan Trigger. Cause Solution Corded: Interface cable is not secure. Verify that the interface cable is properly Cordless: Battery is not charged. connected. Replace or charge battery. Power is not applied to Imager. Corded: Verify that the mobile computer has a fully charged battery installed. Scan application on the mobile computer is not functioning. Imager does not respond. Cordless: Replace or charge Imager battery. Restart the scanning application on the mobile computer. Reset the Imager (See Resetting the Imager on page 30). 37 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Troubleshooting & Maintenance Table 4 Imager Troubleshooting Problem Imager does not decode a bar code. Cause Bar code is unreadable. Exit window is dirty. Bar code symbology is not supported or enabled. Cordless: Bluetooth link is disconnected. Solution Verify that the bar code is not defective, i.e., smudged or damaged. Clean exit window with a lens tissue. Tissues for eyeglasses work well. Do not use tissues coated with lotion (see Cleaning the Imager on page 46). See your system administrator. Reestablish Bluetooth connection (See Establish Bluetooth Connection on page 24). NOTE:
Zebra Support. See <em_Emphasis>Service Information on page 14. If after performing these checks the Imager still experiences problems, contact the distributor or call Charger Table 5 Charger Troubleshooting Problem The Power LED does not light The battery takes too long to recharge Solution Make sure the Power plug of the Power Supply Unit is plugged into a wall outlet and the connector on the end of the Power Supply Cable is plugged into the Chargers power connector. Plug the Power plug of the Power Supply Unit into another outlet. Replace the Power Supply Unit. Contact a service representative (see <em_Emphasis>Service Information on page 14). Ensure that room/battery temperatures are within charging range 0 C to +40 C (+32 F to +104 F). Clean the contacts on the battery (see Cleaning the Charger on page 47). Try another battery to make sure the Charger functions properly. (If the charge time is more than four hours the Charge Status LED flashes red/green.) Contact a service representative (see <em_Emphasis>Service Information on page 14). 38 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Troubleshooting & Maintenance Table 5 Charger Troubleshooting Problem LED indication continuously changes from red to green Solution Remove and re-insert the battery into the charging bay. Check for dirt on battery charging contacts and/or charging bay contacts
(see Cleaning the Charger on page 47). Replace battery with a new one. Contact a service representative (see <em_Emphasis>Service Information on page 14). Maintenance Cleaning the scan window is the basic maintenance required. A dirty window can affect scanning accuracy. Do not allow abrasive material to touch the window. Remove any dirt particles with a damp cloth. Wipe the window using a tissue moistened with ammonia/water. Do not spray water or other cleaning liquids directly into the window. Maintaining the Imager Comfort Pad Replacement Removal To remove the Comfort Pad: from the bottom of the Imager, hold and pull the Comfort Pad out of the Imager. NOTE:
It is not necessary to remove the Finger Strap from the Trigger Swivel Assembly. Figure 22 Removal of Comfort Pad Finger Strap Trigger Swivel Assembly Comfort Pad 39 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Troubleshooting & Maintenance Installation To install the Comfort Pad:
1. Position the Comfort Pad onto the Imager as shown. Figure 23 Installation of Comfort Pad 2. Press the Comfort Pad onto the Imager. When properly installed, the Comfort Pad locks into place. Trigger Swivel Assembly Replacement Removal To remove the Trigger Swivel Assembly:
1. Turn the Imager upside-down. 2. Remove the Comfort Pad. 3. Use a paper clip or similar object to press the Release Latch. Figure 24 Removal of Trigger Swivel Assembly 3 Imager Back 2 Release Latch 1 4. Rotate the Trigger Swivel Assembly to align with the back of the Imager. 5. Lift the Trigger Swivel Assembly off the scan assembly. 40 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Troubleshooting & Maintenance Installation To install the Trigger Swivel Assembly:
1. Turn the Imager upside-down. 2. Position the Trigger Swivel Assembly to align with the back of the Imager. 3. Lower the Trigger Swivel Assembly onto the scan assembly. Figure 25 Installation of Trigger Swivel Assembly 2 Trigger Swivel Assembly 1 1. Rotate the Trigger Swivel Assembly 1/4 turn counterclockwise. 2. Press the Comfort Pad onto the Imager. When properly installed, the Comfort Pad locks into place. Triggerless Strap Holder Replacement NOTE: The Triggerless Strap Holder should be installed when the Imager is intended to be used in Motion and Proximity Initiated bar code read mode. Removal To remove the Triggerless Strap Holder:
1. Turn the Imager upside-down. 2. Remove the Comfort Pad. 3. Use a paper clip or similar object to press the Release Latch. 41 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Troubleshooting & Maintenance Figure 26 Removal of Triggerless Strap Holder 2 3 Imager Back Triggerless Strap Holder Release Latch 1 4. Rotate the Triggerless Strap Holder to align with the back of the Imager. 5. Lift the Triggerless Strap Holder off the Imager. Installation To install the Triggerless Strap Holder:
1. Position the Triggerless Strap Holder to align with the back of the Imager. Figure 27 Turn the Imager upside-down.Installation of Triggerless Strap Holder 2 1 Triggerless Strap Holder 1. Lower the Triggerless Strap Holder onto the Imager. 2. Rotate Triggerless Strap Holder 1/4 turn counterclockwise. Finger Strap Replacement (Trigger Swivel Assembly) Removal 1. Remove the Finger Strap from the Strap Buckle. 2. Pull the Finger Strap out of the Trigger Swivel Assembly. 42 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Troubleshooting & Maintenance Installation 1. Align a new Finger Strap with the Slots in the Trigger Swivel Assembly. Figure 28 Finger Strap Replacement (Trigger Swivel Assembly) Finger Strap Strap Pins Trigger Swivel Assembly Slots Strap Buckle 2. Gently press the Strap Pins to engage with the Slots of the Trigger Swivel Assembly. The Strap Pins snap into the slots. 3. Slip the Finger Strap through the Strap Buckle. 43 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Troubleshooting & Maintenance Finger Strap Replacement (Triggerless Strap Holder) Figure 29 Replacement of Finger Strap (Triggerless Strap Holder) Strap Buckles Removal Remove the Finger Strap from the Strap Buckles. Installation Slip the Finger Strap through the Strap Buckles. Strap Buckle Replacement Figure 30 Strap Buckle Replacement Removal 1. Remove the Trigger Swivel Assembly (see Trigger Swivel Assembly Replacement on page 40). 2. Press the Strap Buckle off the Trigger Swivel Assembly Pin. Installation 1. Align the pin slot of Strap Buckle with the pin of the Trigger Swivel Assembly. 44 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Troubleshooting & Maintenance Figure 31 Strap Buckle Replacement Strap Buckle Pin Strap Buckle 2. Gently press the pin slot of Strap Buckle to engage with the pin of the Trigger Swivel Assembly. The pin slot snaps onto the pin. Install the Trigger Swivel Assembly (see Trigger Swivel Assembly Replacement on page 40). 3. Field Replaceable Parts Table 6 Imager Field Replaceable Parts No 1 2 3 4 5 6 7 8 9 Part KT-CLMPT-RS507-01R KT-BKL-RS507-10R KT-CLMPN-RS507-01R KT-PAD-RS507-10R KT-STRPN-RS507-10R KT-STRPT-RS507-10R KTBTRYRS50EAB00-01 KTBTRYRS50EAB02-01 ADPTRWT-RS507-R Description Trigger Swivel Assembly Set of 10 Strap Buckles Triggerless Strap Holder Set of 10 Comfort Pads Set of 10 Triggerless Finger Strap with Finger Support Set of 10 Trigger Finger Strap with Finger Support Standard Battery Extended Battery Corded Adapter 45 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Troubleshooting & Maintenance Figure 32 Imager Field Replaceable Parts 1 2 3 4 5 6 7 8 Finger Support 9 Cleaning the Imager Wipe the exit window periodically with a lens tissue or other material suitable for cleaning eyeglasses. CAUTION:Do not pour, spray, or spill any liquid on the Imager. The gold plated battery contacts do not tarnish or oxidize. No maintenance should be needed. If the contacts need to be cleaned:
1. Wet the tip of a cotton swab with isopropyl alcohol and squeeze the excess alcohol from the swab. 2. Wipe the metal contacts with the damp swab. Maintaining the Charger The Charger is well constructed and durable; however, it is a precision electronic device and must be treated as such. Follow the procedures in this section to ensure reliable service. Operating conditions for the Charger The Charger is designed to operate in environments that are normally free of dust, dirt, and moisture. It can be operated at temperatures between 0C (+32F) and +40C (+104F). Handling the Charger Do not attempt to open the Charger. No user-serviceable parts are inside. Charge only Lithium-ion batteries that have been designed for use with the Imager. Do not attempt to recharge other types of rechargeable batteries or any type of primary batteries. 46 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Troubleshooting & Maintenance Do not place objects other than Imager batteries inside the Charger. Do not leave the Charger where moisture will condense on it. Protect the Charger from excessive heat, cold, moisture, and harsh, dirty environments. Cleaning the Charger CAUTION:Do not pour, spray, or spill any liquid on the Charger. The gold plated battery contacts do not tarnish or oxidize. No maintenance should be needed. If the contacts need to be cleaned:
1. Remove power from the Charger. 2. Wet the tip of a cotton swab with isopropyl alcohol and squeeze the excess alcohol from the swab. 3. Wipe the metal contacts with the damp swab. 47 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Update and Configuration Introduction This chapter covers the following topics:
Imager Motion and Proximity Configuration Configuring the Imager Debugging logger Firmware upgrade Configuring the Imager Introduction The Imager is a modular product used in several hardware configurations. Such configurations may include corded or cordless connection to a terminal / mobile computer with manual or automatic triggering. The Imager is provided with a default software configuration set in the factory. This software configuration can be optimized by the customer to meet their specific operational requirements. Therefore, before using the Imager, it is essential that the Imager be properly configured to harness its extensive capabilities and gain maximum efficiency. There are several ways to configure the Imager. The best way is to set the parameters for each application allowing the required degrees of freedom. In some cases it is recommended to allow the user to select between the various operational modes or use cases, each with its own set of parameters. Zebra mobile computers using the EMDK may utilize the SCAN and/or RSM APIs to configure the operation of the Imager. Zebra terminals that cannot use the EMDK, may configure some operations of the Imager by scanning special configuration bar codes (see Miscellaneous Imager Options on page 70) as done with many of Zebra bar code scanners. A selection of most configured Imager parameters can be set with the Remote Scanner Management Sample
(RSMSample) application installed on all Zebra mobile computers supporting the Imager. Some of the Imager parameters can also be set by the Control Panel application. Once connected to a mobile computer, the application running on the mobile computer overrides the Imager parameters previously set. 48 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Update and Configuration Control Panel Application The Control Panel (CTLpanel) application can be used for configuring the Imager by changing its values. The Control Panel application also enables one to retrieve and display the current setting of each value. The Control Panel application together with the RSMsample application enable the user to configure the RS507. Users with Mobile computer that do not have the Control Panel application installed can download the application
(CtlPanelWM.exe) and related documentation from the Support Central site at: http://www.zebra.com/support. The following example describes how to read and configure new values of the Imager attributes. To set new attribute values:
1. When using the WT4090, from the App Launcher screen, open the Utilities folder and start the Control Panel application. When using a mobile computer with Windows Mobile, open the Application folder and start the CtlPanelWM application. Figure 33 Starting the Control Panel Application WT4090 - Control Panel Application Windows Mobile -
Control Panel Application 2. Select Scanner Settings ..... Figure 34 Scanner Settings 49 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Update and Configuration 3. Use the > < keys to select scanner. Select SCN1 for corded Imager or SCN2 for cordless Imager (Bluetooth). NOTE: Before you select SCN2 make sure to pair and connect the Imager to the mobile computer. 4. Select Reader Params Figure 35 Reader Params 5. Use the > < keys to change the Picklist Mode to Enable and press the OK button. Figure 36 Picklist Mode This setting is retained until cold boot is performed to the mobile computer or new setting is entered through the Control Panel application. 6. Re-start your scan application and verify that Picklist Mode is enabled. RSMSample Application The Remote Scanner Management Sample (RSMSample) application is used for configuring the Imager by changing its attribute values. The RSMSample application also enables one to retrieve and display the current setting of each attribute. Users with mobile computer that do not have the RSMSample application installed can download the application and related documentation from the Support Central site at: www.zebra.com/support. NOTE: When the Imager is connected to a mobile computer, configuration by scanning bar codes is disabled. In such case, the Imager configuration is performed by the application (e.g RSMSamplen) running on the mobile computer. The new configuration overrides the previous configuration. The new configuration is saved in the Imager memory after disconnecting the Imager from the mobile computer or terminating the application. The following example describes how to read and configure new values of the Imager attributes. 50 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Update and Configuration To set new attribute values:
1. From the mobile computer Application folder, run the RSMSample application. Figure 37 Mobile Computer Application Folder - RSMSample Application Icon WT4090 - RSMSample Application Windows Mobile - RSMSample Application 2. From the Dialog window, select Bluetooth SSI Scanner Driver. Figure 38 Dialog Window - Bluetooth SSI Scanner Driver 3. Press the Get All Supported Attributes button to display all supported attributes. Figure 39 RSMSample Application - Get All Supported Attributes Button 51 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Update and Configuration 4. The Attribute scroll window displays all supported attributes (see Table on page 53) and an operation success indication. Figure 40 RSMSample Application - Attribute Scroll Window fh Attribute Scroll Window Operation Success Indication 5. Select the attribute you wish to change and press the Get button to display the current value of the attribute. Figure 41 RSMSample Application - Get Button 6. The application returns the current value settings of the attribute. Figure 42 RSMSample Application - Current Value Settings of Attribute 7. Press again the Get All Supported Attributes button to show all supported attributes (see Figure 43). 8. Select an attribute (see Table ), enter the new value and press the Set button. 52 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Update and Configuration Figure 43 RSMSample Application - Setting an Attribute Value Line In the following example, after setting the ATTR_BT_DISCONNECT attribute to 0 (disconnect), the Bluetooth radio of the Imager is turned off successfully as indicated by the change of the Bluetooth icon from Bluetooth Connection icon to Bluetooth Disabled icon. Figure 44 RSMSample Application - Bluetooth Radio Turned Off Successfully Indication Bluetooth Disabled icon Imager Attributes Table lists the Imager attributes that can be changed using the RSMSample application. Table 7 Imager Attributes Attribute Access Values ATTR_SCANLINE_WIDTH R/W ATTR_DISABLE_GOOD_DECOD E_LED_BEEP R/W ATTR_MODEL_NUMBER R 0
(Pick list disabled) 2 Narrow
(Pick list enabled) 0- Enabled automatically green LED and beep on good decode. 1- Disabled N/A 53 Factory Default 0 Description Width of laser scan line or size of Imager's effective Field of View
(Pick list) Good decode feedback on Imager N/A Model number 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Update and Configuration Table 7 Imager Attributes Attribute Access Values ATTR_SERIAL_NUMBER ATTR_DATE_OF_MANUFACTUR E ATTR_DATE_OF_SERVICE ATTR_BT_ADDR R R R R N/A N/A N/A N/A ATTR_BT_AUTHENTICATION R/W ATTR_BT_ENCRYPTION R/W 1 - Enabled 0 - Disabled 1 - Enabled 0 - Disabled ATTR_BT_PINCODE R/W Up to six characters ATTR_RECONNECT_ATTEMPTS R/W ATTR_BEEP_ON_RECON_ATTE MPT R/W ATTR_HID_AUTO_RECON R/W ATTR_BT_FRIENDLY_NAME R/W 6 = 30 sec, 7 = 35 sec, 8
= 40 sec, 9 = 45 sec, 10
= 50 sec, 11 = 55 sec, 12
= 60 sec 1 - Enabled 0 - Disabled 0 - Never Reconnect 1 - Reconnect on Data 2 - Reconnect immediately Up to 23 characters ATTR_PIN_CODE_TYPE R/W 1 - User prompt 0 - Automatically use stored PIN code 0 54 Factory Default N/A N/A N/A N/A 1 1 Description Serial number Date of manufacture Last date of repair by Zebra Imager Bluetooth address Enable Bluetooth authentication
(Permanently saved) Enable encryption over Bluetooth (Permanently saved) 12345 Pin code when Bluetooth Authentication is enabled
(Permanently saved) Reconnect attempt duration when the Imager is out of range When enabled, the Imager emits 5 short high beeps every 5 seconds while the reconnection attempt is in progress Auto-reconnect behavior when connection is lost. 6 0 0 RS507 Friendly name displayed by Bluetooth remote devices (Permanently saved). Prompt the user for PIN code or use PIN code stored in memory. 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Update and Configuration Table 7 Imager Attributes Attribute Access Values ATTR_BT_INQUIRY_MODE R/W 1 - Limited 0 - General ATTR_EXCLUSIVE_CODE128_E N ATTR_MEMS_ENABLE R/W R/W 1 - Enabled 0 - Disabled 1 - Enabled 0 - Disabled ATTR_PROXIMITY_ENABLE R/W ATTR_PROXIMITY_DISTANCE R/W ATTR_PAGING_ENABLE ATTR_PAGING_BEEP_SEQ R/W R/W ATTR_LOW_BATTERY_IND_EN R/W ATTR_SCAN_TRIG_WAKEUP_EN R/W 1 - Enabled 0 - Disabled 0 Short 1 Mid 2 Long 1 - Enabled 0 - Disabled 0-26 1 - Enabled 0 - Disabled 1 - Enabled 0 - Disabled 55 Factory Default 0 0 Trigger Model
-0 Triggerl ess Model
-1 Trigger Model
-0 Triggerl ess Model
-1 2 0 15 0 1 Description The used inquiry mode:
Limited: The Imager finds only an associated device. General: The Imager finds all the visible devices. Ignore Code 128 beginning with 420 and 421 Motion trigger feature Proximity feature Proximity distance Paging device enable /
disable Paging beep sequence Beep pattern values. Low battery indication. Scan trigger serves as an Imager wake-up source from low power. 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Update and Configuration Table 7 Imager Attributes Attribute Access Values ATTR_BLUETOOTH_AUTO_REC ON R/W 0 None 1 - Power on 2 - On when back in range 3 - On when power is on and back within range ATTR_PROXIMITY_CONTINUOU S_EN R/W 1 - Enabled 0 - Disabled ATTR_GOOD_SCANS_DELAY R/W ATTR_FORCE_PAIRING_SAVE R/W ATTR_PAGING_ACTIVATE ATTR_BT_DISCONNECT ATTR_BT_UNPAIR ATTR_FIRM_VERSION ATTR_DEVICE_CLASS W W W R R Values 0 -150 (in 100 msec intervals) 0 No delay 1 150 (100 15000 msec) 0 Disabled 1 Enabled 0 Stop 1 Start 0 - Disconnected 0 - Unpaired N/A N/A 56 Factory Default 2 0 0 1 Description Defines Bluetooth reconnection scheme
(Permanently saved) Important: If option 1
(On Power) or 3 (On when power is on and back within range) is set, the pair should be properly marked and kept visible on the Imager and mobile computer to avoid user selecting of an unpaired set. Proximity continuous mode (for scanning packages off conveyer belt). Delay between good scans in proximity continuous mode
(msec). Force BD_Address saving when pairing fails
(Permanently saved). Start / stop Imager paging Bluetooth disconnect command from terminal to Imager Bluetooth un-pair command from terminal to Imager. Imager Firmware version. Imager system class 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Update and Configuration Table 7 Imager Attributes Attribute Access Values ATTR_BATTERY_STATUS R ATTR_BATTERY_CAPACITY ATTR_BATTERY_ID R R 0- Unknown 1- Full 2- Medium 3- Empty 4- Charging full rate 5- Charging half rate 6- Charging Trickle 7- Discharging Battery Cycle in progress 0-100 (battery percent) 9999 if error (no battery) 0 Simple 1 Double 2 Cabled 9999 Error Factory Default Description Battery Status Battery capacity Battery ID Imager Motion and Proximity Configuration The Imager proximity and motion feature enables auto-triggering of the Imager upon motion and/or proximity to an object. Motion and proximity detection can be enabled or disabled by the mobile computer application such as the Remote Scanner Management (RSMSample) application of the mobile computer (see RSMSample Application on page 8-50) or by scanning configuration bar codes (see <em_Emphasis>Miscellaneous Imager Options on page 9-70). NOTE: Once configured, the motion and/or proximity attributes are retained in the Imager memory following warm or cold boot. Operation Modes The Imager can be configured to a single or continuous scan operation. In most use cases, a single scan mode is the preferred operation. However, when scanning packages off a moving conveyer belt, it is sometimes recommended to use the continuous scan mode (also referred to as 'Proximity Continuous' mode). Continuous operation automatically results from the combined settings of motion and proximity (enabling or disabling motion and/or proximity. See Table ). The Imager is provided with motion and proximity enabled by default. To set new values to the motion and/or proximity attributes, refer to <em_Emphasis>Imager Attributes on page 8-53. 57 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Update and Configuration Table 8 Imager Operation Modes Mode Number 1 2 3 4 5 Parameter States
(Motion / Proximity / Continuous Scan) Motion: enabled Proximity: enabled Continuous scan: disabled Motion: disabled Proximity: enabled Continuous scan: disabled Motion: enabled Proximity: disabled Continuous scan: disabled Motion: enabled Proximity: enabled Continuous scan: enabled Motion: disabled Proximity: enabled Continuous scan: enabled Description The Imager performs a single scan when moved and positioned in proximity to an object. Scanning resumes when the Imager is moved and re-positioned in proximity to an object. This mode is a default mode. The Imager starts to continuously scan when positioned in proximity to an object. The Imager stops scanning when the object is out of proximity range. Upon movement, the Imager performs a single scan and stops. The Imager performs a continuous scan when moved and positioned in proximity to an object. The Imager continues to scan as long as it detects an object within its range and bar codes are scanned successfully. The Imager stops scanning if proximity to an object is not detected, or if the Imager fails to scan three consecutive times. The description of this operation mode is identical to the description of mode number 2 in this table. Configuring Motion and Proximity by Scanning Bar Codes NOTE: Scanning bar codes for configuring motion and/or proximity is enabled only when the Imager is in cordless (Bluetooth) configuration. To enable or disable motion or proximity, perform cold boot by removing and re-installing the battery (see Remove the Battery on page 20). NOTE: Throughout this section, configuration bar codes shown with asterisks (*) indicate default values. Motion Sensing Control Disable Motion Trigger 58 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Update and Configuration
*Enable Motion Trigger Proximity Sensing Control Disable Proximity
*Enable Proximity Proximity Continuous Enable The Proximity Continuous Enable parameter enables/disables the proximity continuous feature.
*Disable Proximity Continues Enable Proximity Continues Mid Range The Proximity Distance parameter sets the proximity sensitivity range. Short Range 59 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Update and Configuration
*Long Range Good Scan indication delay Control The Good Scan Delay parameter sets a delay between good scans when scanning is in continuous mode. This delay is effective when:
Motion detection - Enabled Proximity - Enabled Proximity continues - Enabled Or Motion detection - Disabled Proximity - Enabled 0 msec 400 msec 800 msec 60 200 msec
*600 msec 1000 msec 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Update and Configuration 1400 msec 1800 msec 1200 msec 1600 msec 2000 msec Real Time Logger The Imager includes a Real Time Logger application that logs events, errors, exceptions and software diagnostics of the Imager during its operation. Each log record has a time stamp with a 1ms resolution. The logger time is synchronized with the host computers time. The log is retained only after warm boot. The log memory size is 4 MB and operates in a cyclic way. Figure 45 shows the Real Time Logger file content as shown on a host computer screen. 61 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Update and Configuration Figure 45 Real Time Logger Content Screen ScannerLog Application NOTE: When ScannerLog Application is used with a corded connection. Open the ScannerLog application while the scan application is still running. 1. Perform a warm boot (see Warm Boot on page 30). 2. Select the Imager ScannerLog application from the Application folder. Figure 46 ScannerLog Application Icon ScannerLog Application icon on WT4090 screen ScannerLog Application icon on Windows Mobile screen 3. From the Dialog screen, Select Bluetooth SSI Scanner Driver and press the OK button. 62 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Update and Configuration Figure 47 Dialog Screen - Bluetooth SSI Scanner Driver 4. Define the name and download location of the log file and press the OK button. Figure 48 ScannerLog Application - Log File Name and Download Location 5. Press Start to begin downloading. Figure 49 ScannerLog Application- Starting Download 6. Verify that downloading of the log file starts. 63 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Update and Configuration Figure 50 ScannerLog Application- Download in Progress 7. Verify that the log file download is completed and press the OK button. Figure 51 ScannerLog Application- Download Completed 8. On the mobile computer, open the log file to see the content. Figure 52 ScannerLog Application - Log File Content Imager Firmware Update Required Equipment The following hardware is required for updating the firmware of the Imager:
Host computer Mobile computer 64 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Update and Configuration USB / RS232 interface cable or any cradle set-up used for establishing an ActiveSync connection between the host computer and mobile computer. The following software is required for updating the firmware of the Imager:
New Imager firmware file (*.DAT file format) CAB file to install in the mobile computer. ActiveSync application installed on the host computer and the mobile computer (for copying the new Imager firmware and RS507 CAB files from the host computer to the mobile computer). FirmwareUpdate application installed in the mobile computer (part of the CAB file installation). This application is used for downloading the firmware file from the mobile computer to the Imager. Updating the RS507 Firmware Before using the FirmwareUpdate application:
1. Exit all scanning applications running on the mobile computer. 2. Verify that the mobile computer battery is fully charged or that the mobile computer is connected to an external power source. 3. When using a corded Imager, verify that the Imager is properly connected to the mobile computer. When using a cordless Imager verify that the Imager battery is fully charged. To upgrade the Imager firmware:
1. Connect the Imager to the mobile computer that supports the RS507. 2. Start the FirmwareUpdate application located in the Application folder for WinCE devices or under Start /
Programs for Windows Mobile devices (the FirmwareUpdate application and related documentation can be downloaded from the Support Central site at: http://www.zebra.com/support. Figure 53 FirmwareUpdate Application Icon 3. Select the interface method (Bluetooth in the following example). NOTE: The following screen is displayed only when using the WT4090. In other mobile computers, Bluetooth mode is selected by default. Press Yes (Bluetooth mode) to pair the Imager with the mobile computer (see Restore Lost Bluetooth Connection on page 26). 65 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Update and Configuration Figure 54 Selection of the Bluetooth Interface Mode 4. Press the Firmware button and verify that the application shows the version number of the current firmware of the Imager. Figure 55 Firmware Update Screen 5. Copy the *.DAT file to the mobile computer using ActiveSync connection. 6. Press the Firmware button to select the new firmware *.DAT file and the OK button. Figure 56 Firmware Update Screen - Selection of *.DAT File 7. Press the Flash Scanner button to start updating the firmware. 66 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Update and Configuration Figure 57 Firmware Update Screen - Flash Scanner Button 8. Verify that the firmware download starts. When the download starts, the ### Starting Firmware Download!
message displays. Firmware download is completed when the Update engine version message is displayed. Figure 58 Firmware Update Screen - Starting Firmware Download! Message 9. Pair the Imager with the mobile computer (see Restore Lost Bluetooth Connection on page 26). 10. Verify that the firmware download is completed by looking at the Initial software version number and the new software version number. Figure 59 Firmware Update Screen New software version number Initial software version number 11. Press the Esc key on the mobile computer or the X in the top right corner of the application window to exit the FirmwareUpdate application. Rapid Deployment Client The Rapid Deployment (RD) Client application downloads an AirBeam package to a mobile computer connected to an Imager from a Mobility Services Platform (MSP) Consoles FTP server. 67 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Update and Configuration The MSP Console is a web-based interface to the wireless infrastructure monitoring and management tools provided by the MSP Lite or MSP Enterprise server. AirBeam packages transferred to the FTP server, are downloaded to mobile computers connected to the wireless network. The location of AirBeam packages are encoded in deployment bar codes. When an Imager captures a deployment bar code, the AirBeam package(s) is downloaded from the FTP server to the Imager via the mobile computer. A single deployment bar code can be captured by many Imagers. NOTE: For detailed information about the MSP Console, MSP Lite/MSP Enterprise servers and creating deployment bar codes, refer to the MSP User Guide. The AirBeam package can be downloaded from the Support Central web site (Service Information on page 14). The package includes:
Mobile computer's RS507 enhancement .APF file Compatible RS507 Firmware .APF file. The .APF file is used for management and distribution of the AirBeam package when the file is transferred from the MSP to the Imager connected to the mobile computer over the Bluetooth. NOTE: Make sure that the enhancement APF file is deployed on the mobile computer before you start the deployment. To download the AirBeam package from the remote MSP server:
1. 2. Connect the mobile computer to the network via WLAN, or other cradle or cable connection (refer to you Install the RS507_xxx.APF file on the MSP server (refer to MSP server documentation). mobile computer user guide). 3. From the App Launcher (or Windows Mobile Programs) screen of your mobile computer, start the Rapid Deployment Client application. Figure 60 Rapid Deployment Client Application Icon Rapid Deployment Client Application Icon on WT4090 Screen Rapid Deployment Client Application Icon on Windows Mobile Screen 4. The Rapid Deployment Client Application searches for Imagers. Press the Pair button displayed on the screen. 68 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Update and Configuration Figure 61 Rapid Deployment Client Application - Bluetooth Connection Screen 5. The Display BD Address utility is displayed. Use the Imager to scan the pairing bar code from the mobile computer screen and press the ESC button on the mobile computer. Figure 62 Display BD Address Utility - Pairing Bar Code 6. The Scan bar code to deploy screen is displayed. Scan the deployment bar code provided by your system administration to start the update process. Figure 63 Scan Bar Code to Deploy Screen During the update, process reports are display on the screen and the Imager LEDs show the following indications:
Flashing red - firmware file is downloading Steady red - firmware file is extracted inside the Imager Steady Green and a single beep - firmware update is completed 69 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Miscellaneous Imager Options Introduction The Imager is intended to operate hand in hand with the mobile computer to which it is connected. The mobile computer automatically loads configuration data whenever connected to an Imager (corded or cordless). This operation does not require scanning configuration bar codes. Using configuration bar codes is only available for a cordless Imager when decontrolled from the mobile computer. It is recommended to use configuration bar codes only for setting parameters that cannot be configured by the other mobile computer application. NOTE:
Imager parameters set by scanning configuration bar codes, persist in the Imagers memory. The Imager ships with the settings shown in Table 9 on page 71 (also see <em_Emphasis>Appendix , Standard Default Parameters for host device and miscellaneous defaults). If the default values suit the requirements, programming is not necessary. NOTE: Most computer monitors allow scanning the bar codes directly on the screen (when using the imaging engine). When scanning from the screen, be sure to set the document magnification to a level where you can see the bar code clearly, and bars and/or spaces are not merging. To return all features to default values, scan the Set Default Parameter on page 72. Throughout the programming bar code menus, asterisks indicate (*) default values.
* Indicates Default
*High Volume
(00h) Feature/Option Option Hex Value for programming via SSI command Scanning Sequence Examples In most cases, scanning one bar code sets the parameter value. For example, to set the beeper tone to high, scan the High Frequency (beeper tone) bar code listed under Beeper Tone on page 75. The Imager issues a fast warble beep and the LED turns green, signifying a successful parameter entry. 70 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY
1 | User Manual 2 | Users Manual | 3.59 MiB |
Miscellaneous Imager Options Other parameters, such as Serial Response Time-Out or Data Transmission Formats, require scanning several bar codes. See these parameter descriptions for this procedure. Errors While Scanning Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter. User Preferences/Miscellaneous Options Parameter Defaults Table 9 lists defaults for user preferences parameters. Scan the appropriate bar codes in this guide. These new values replace the standard default values in memory. To recall the default parameter values, scan the Set Default Parameter on page 72. NOTE: See <em_Emphasis>Appendix , Standard Default Parameters for all user preferences, hosts, symbologies, and miscellaneous default parameters. Table 9 User Preferences Parameter Defaults Parameter Parameter Number Default User Preferences Motion Sensing Control Proximity Sensing Control Proximity Continuous Proximity Continuous Enable Good Scan indication delay Control Enabled Enabled Enabled Disabled 600 ms Set Default Parameter Set Defaults Parameter Bar Code Scanning Beep After Good Decode Beeper Tone Beeper Volume Enabled Enabled Medium High ECh 38h 91h 8Ch 71 Page Number
<Blue><Itali c>8-58
<Blue><Itali c>8-59
<Blue><Itali c>8-59
<Blue><Itali c>8-59
<Blue><Itali c>8-60
<Blue><Itali c>9-72
<Blue><Itali c>9-73
<Blue><Itali c>9-74
<Blue><Itali c>9-75
<Blue><Itali c>9-76 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Miscellaneous Imager Options Table 9 User Preferences Parameter Defaults (Continued) Parameter Number Parameter Default Picklist Mode F0h 92h Disabled Always Fuzzy 1D Processing F1h 02h Enabled Decoding Illumination F0h, 2Ah Enabled Miscellaneous Options Transmit Code ID Character 2Dh None Prefix Value 63h, 69h 7013 <CR><LF>
Suffix 1 Value Suffix 2 Value Scan Data Transmission Format 62h 68h 64h 6Ah EBh 7013 <CR><LF>
Data as is FN1 Substitution Values 67h 6Dh Set Transmit No Read Message 5Eh Disabled Bluetooth Pairing Bar Code Bluetooth Un-pairing Bar Code None None Page Number
<Blue><Itali c>9-78
<Blue><Itali c>9-79
<Blue><Itali c>9-80
<Blue><Itali c>9-83
<Blue><Itali c>9-84
<Blue><Itali c>9-84
<Blue><Itali c>9-85
<Blue><Itali c>9-87
<Blue><Itali c>9-88
<Blue><Itali c>5-25
<Blue><Itali c>5-26 User Preferences Set Default Parameter You can reset the Imager to two types of defaults: factory defaults or custom defaults. Scan the appropriate bar code below to reset the decoder to its default settings and/or set its current settings as custom defaults. Set Defaults - Scan this bar code to reset all parameters to custom default settings. 72 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Miscellaneous Imager Options Set Factory Defaults - Scan this bar code to restore the factory default values listed in Table 17. This deletes any custom defaults set.
*Set Defaults Set Factory Defaults Parameter Bar Code Scanning Parameter # ECh To disable the decoding of parameter bar codes, including the Set Defaults parameter bar codes, scan the Disable Parameter Scanning bar code below. To enable decoding of parameter bar codes, scan Enable Parameter Scanning.
*Enable Parameter Bar Code Scanning
(01h) Disable Parameter Bar Code Scanning
(00h) 73 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Miscellaneous Imager Options Beep After Good Decode Parameter # 38h Scan a bar code below to select whether or not the Imager beeps after a good decode. If selecting Do Not Beep After Good Decode, the beeper still operates during parameter menu scanning and to indicate error conditions.
*Beep After Good Decode
(Enable)
(01h) Do Not Beep After Good Decode
(Disable)
(00h) 74 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Miscellaneous Imager Options Beeper Tone Parameter # 91h To select a decode beep frequency (tone), scan one of the following bar codes. Low Tone
(02h) High Tone
(00h)
*Medium Tone
(01h) 75 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Miscellaneous Imager Options Beeper Volume Parameter # 8Ch To select a beeper volume, scan the Low Volume, Medium Volume, or High Volume bar code. Low Volume
(02h)
*High Volume
(00h) Medium Volume
(01h) 76 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Miscellaneous Imager Options Imager Activity Modes The Imager is capable of four modes of activity:
Scan trigger Busy (Run) Mode The Imager is scanning or transferring data using Bluetooth. Standby Mode The Imager enters Standby mode (Low Power Mode) when it is idle for more than one second. The Imager wakes-up and returns to busy (run) mode upon at least one of the following events:
Motion activity Real time clock (a system inside the Imager) Bluetooth activity Press of the Restore key Deep Sleep (Critical Off) Mode The deep sleep mode is only applicable when the Imager is connected to a mobile computer in cordless mode. When the battery power of the Imager is below 3V, the Imager turns off and enters Standby mode. To recover from Deep Sleep mode, replace the battery with a charged battery (See <Italic><bl_blue text> Remove the Battery on page 20.) OFF Mode The Imager is not connected to power source. 77 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Miscellaneous Imager Options Picklist Mode Parameter # F0h 92h Picklist mode enables the Imager to decode only bar codes that are aligned under the laser crosshair. Select one of the following picklist modes for the Imager:
Disabled Always - Picklist mode is always disabled. Enabled Always - Picklist mode is always enabled. NOTE: For the DS9808-LR, if you configure Trigger B for Imager Decoding and enable Picklist Mode, activating Trigger B turns on the imager aiming pattern, and releasing the trigger activates decoding.
*Disabled Always
(00h) Enabled Always
(02h) 78 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Miscellaneous Imager Options Fuzzy 1D Processing Parameter # F1h 02h This option is enabled by default to optimize decode performance on 1D bar codes, including damaged and poor quality symbols. Disable this only if you experience time delays when decoding 2D bar codes, or in detecting a no decode.
*Enable Fuzzy 1D Processing
(01h) Disable Fuzzy 1D Processing
(00h) 79 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Miscellaneous Imager Options Decoding Illumination Parameter # F0h, 2Ah Selecting Enable Decoding Illumination causes the Imager to flash illumination to aid decoding. Select Disable Decoding Illumination to prevent the Imager from using decoding illumination. Enabling illumination usually results in superior images. The effectiveness of the illumination decreases as the distance to the target increases.
*Enable Decoding Illumination
(01h) Disable Decoding Illumination
(00h) Low Battery Indication Cycle The Low Battery Indication Cycle parameter sets low battery indication recurrence.
*Every 10 seconds Every 20 seconds Every 40 seconds Every 30 seconds Every 50 seconds 80 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Miscellaneous Imager Options Bluetooth Disconnection Alert Control Bluetooth Disconnect Indication When this parameter is enabled, the RS507 plays a beep every 10 sec when the RS507 Bluetooth is disconnected.
*Disable Enable
*120 Seconds 240 Seconds Bluetooth Disconnect Indication After Battery Insert Time delay for Bluetooth disconnect indication after battery installed. 60 Seconds 180 seconds 300 Seconds 81 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Miscellaneous Imager Options Bluetooth Disconnect Indication After Bluetooth Disconnection Time delay for Bluetooth disconnect indication after Bluetooth disconnection.
*30 Seconds 90 Seconds
* 3 High/Short Beeps 3 High/Long beep. 60 Seconds 120 Seconds Bluetooth Disconnect Indication - Beep Duration 3 Low/Short Beeps High/Low/High Beep 82 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Miscellaneous Imager Options Bluetooth Disconnect Indication - LED Indication Green LED turns on for 600ms Red LED turns on for 600ms Green LED turns on for 1000ms
*Red LED turns on for 600ms Miscellaneous Scanner Parameters Transmit Code ID Character Parameter # 2Dh A Code ID character identifies the code type of a scanned bar code. This is useful when decoding more than one code type. In addition to any single character prefix already selected, the Code ID character is inserted between the prefix and the decoded symbol. Select no Code ID character, a Symbol Code ID character, or an AIM Code ID character. For Code ID Characters, see <em_Emphasis>Symbol Code Identifiers on page 14-235 and <em_Emphasis>AIM Code Identifiers on page 14-236. NOTE:
Message on page 88, the Imager appends the code ID for Code 39 to the NR message. If you enable Symbol Code ID Character or AIM Code ID Character, and enable Transmit No Read 83 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Miscellaneous Imager Options Symbol Code ID Character
(02h) AIM Code ID Character
(01h)
*None
(00h) Prefix/Suffix Values Key Category Parameter # P = 63h, S1 = 62h, S2 = 64h Decimal Value Parameter # P = 69h, S1 = 68h, S2 = 6Ah You can append a prefix and/or one or two suffixes to scan data for use in data editing. To set a value for a prefix or suffix, scan a four-digit number (i.e., four bar codes from <em_Emphasis>Appendix , Numeric Bar Codes) that corresponds to that value. When using host commands to set the prefix or suffix, set the key category parameter to 1, then set the 3-digit decimal value. To correct an error or change a selection, scan <em_Emphasis>Cancel on page 16-246. NOTE: To use Prefix/Suffix values, first set the Scan Data Transmission Format on page 85. 84 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Miscellaneous Imager Options Scan Prefix
(07h) Scan Suffix 2
(08h) Scan Suffix 1
(06h) Data Format Cancel Scan Data Transmission Format Parameter # EBh To change the scan data format, scan one of the following eight bar codes corresponding to the desired format. NOTE:
If using this parameter do not use ADF rules to set the prefix/suffix. 85 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Miscellaneous Imager Options To set values for the prefix and/or suffix, see Prefix/Suffix Values on page 84.
<DATA> <SUFFIX 1>
(01h)
<DATA> <SUFFIX 1> <SUFFIX 2>
(03h)
*Data As Is
(00h)
<DATA> <SUFFIX 2>
(02h)
<PREFIX> <DATA >
(04h) 86 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Miscellaneous Imager Options Scan Data Transmission Format (continued)
<PREFIX> <DATA> <SUFFIX 1>
(05h)
<PREFIX> <DATA> <SUFFIX 1> <SUFFIX 2>
(07h)
<PREFIX> <DATA> <SUFFIX 2>
(06h) FN1 Substitution Values Key Category Parameter # 67h Decimal Value Parameter # 6Dh The Wedge and USB HID Keyboard hosts support a FN1 Substitution feature. Enabling this substitutes any FN1 character (0x1b) in an EAN128 bar code with a value. This value defaults to 7013 (Enter Key). When using host commands to set the FN1 substitution value, set the key category parameter to 1, then set the 3-digit keystroke value. See the ASCII Character Set table for the current host interface for the desired value. To select a FN1 substitution value via bar code menus:
1. Scan the bar code below. Set FN1 Substitution Value 2. Locate the keystroke desired for FN1 Substitution in the ASCII Character Set table for the current host interface. Enter the 4-digit ASCII Value by scanning each digit in <em_Emphasis>Appendix , Numeric Bar Codes. To correct an error or change the selection, scan Cancel. 87 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Miscellaneous Imager Options To enable FN1 substitution for USB HID keyboard, scan the Enable FN1 Substitution bar code on page 87. Transmit No Read Message Parameter # 5Eh Scan a bar code below to select whether or not to transmit a No Read message. Enable this to transmit the characters NR when a bar code does not decoded. Disable this to send nothing to the host if a symbol does not decode. If you enable Transmit No Read, and also enable Symbol Code ID Character or AIM Code ID NOTE:
Character for Transmit Code ID Character on page 83, the Imager appends the code ID for Code 39 to the NR message. Enable No Read
(01h)
*Disable No Read
(00h) 88 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Introduction This chapter describes symbology features and provides programming bar codes for selecting these features. Before programming, follow the instructions in Getting Started. NOTE: When the Imager is connected to a mobile computer, configuration by scanning bar codes is disabled. In such case, programming the Imager is performed by an application running on the mobile computer. When the Imager is connected to a mobile computer, the configuration application running on the mobile computer may override the parameters previously entered by scanning. Once configured, the new parameters are saved in the Imager memory after disconnecting the Imager or terminating the application. To set feature values, scan a single bar code or a short bar code sequence. The settings are stored in non-volatile memory and are preserved even when the Imager powers down. Select a host type after the power-up beeps sound. This is only necessary upon the first power-up when connected to a new host. To return all features to default values, scan the default bar code (see Set Default Parameter on page 72). Throughout the programming bar code menus, asterisks (*) indicate default values.
* Indicates Default
*Enable UPC-A
(01h) Feature/Option Option Hex Value for programming via SSI command Scanning Sequence Examples In most cases, scanning one bar code sets the parameter value. For example, to transmit bar code data without the UPC-A check digit, simply scan the Do Not Transmit UPC-A Check Digit bar code under Transmit UPC-A Check Digit on page 106. The Imager issues a fast warble beep and the LEDs turn green, signifying a successful parameter entry. Other parameters, such as Set Length(s) for D 2 of 5 require scanning several bar codes. See the individual parameter, such as Set Length(s) for D 2 of 5, for this procedure. 89 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Errors While Scanning Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter. Symbology Parameter Defaults Table 10 lists the defaults for all symbology parameters. There are two ways to change the default values:
Scan the appropriate bar codes in this guide. These new values replace the standard default values in memory. To recall the default parameter values, scan the Set Default Parameter on page 72. Download data through the devices serial port using SSI. Hexadecimal parameter numbers appear in this chapter below the parameter title, and options appear in parenthesis beneath the accompanying bar codes. Refer to the Simple Serial Interface (SSI) Programmers Guide for detailed instructions for changing parameters using this method. NOTE: See <em_Emphasis>Appendix , Standard Default Parameters for all user preferences, hosts, and miscellaneous default parameters. Table 10 Parameter Defaults Parameter Parameter Number Default UPC/EAN UPC-A UPC-E UPC-E1 EAN-8/JAN 8 EAN-13/JAN 13 Bookland EAN 01h 02h 0Ch 04h 03h 53h Enabled Enabled Disabled Enabled Enabled Disabled Decode UPC/EAN/JAN Supplementals (2 and 5 digits) 10h Ignore User-Programmable Supplementals Supplemental 1:
Supplemental 2:
F1h 43h F1h 44h 90 Page Number
<Blue><It alic>10-99
<Blue><It alic>10-99
<Blue><It alic>10-10 0
<Blue><It alic>10-10 0
<Blue><It alic>10-10 1
<Blue><It alic>10-10 1
<Blue><It alic>10-10 3
<Blue><It alic>10-10 5 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Table 10 Parameter Defaults (Continued) Parameter Parameter Number Default UPC/EAN/JAN Supplemental Redundancy 50h 10 Decode UPC/EAN/JAN Supplemental AIM ID F1h A0h Combined Transmit UPC-A Check Digit Transmit UPC-E Check Digit Transmit UPC-E1 Check Digit UPC-A Preamble UPC-E Preamble UPC-E1 Preamble Convert UPC-E to A Convert UPC-E1 to A EAN-8/JAN-8 Extend 28h 29h 2Ah 22h 23h 24h 25h 26h 27h Enabled Enabled Enabled System Character System Character System Character Disabled Disabled Disabled Bookland ISBN Format F1h 40h ISBN-10 UCC Coupon Extended Code 55h Enabled ISSN EAN F1h 69h Disabled 91 Page Number
<Blue><It alic>10-10 5
<Blue><It alic>10-10 6
<Blue><It alic>10-10 6
<Blue><It alic>10-10 6
<Blue><It alic>10-10 7
<Blue><It alic>10-10 7
<Blue><It alic>10-10 7
<Blue><It alic>10-10 9
<Blue><It alic>10-11 1
<Blue><It alic>10-11 1
<Blue><It alic>10-11 2
<Blue><It alic>10-11 3
<Blue><It alic>10-11 4
<Blue><It alic>10-11 4 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Table 10 Parameter Defaults (Continued) Parameter Code 128 Code 128 Parameter Number Default 08h Enabled Set Length(s) for Code 128 D1h D2h Any Length GS1-128 (formerly UCC/EAN-128) ISBT 128 0Eh 54h Enabled Enabled ISBT Concatenation F1h 41h Disabled Check ISBT Table F1h 42h Enabled ISBT Concatenation Redundancy DFh 10 Code 39 Code 39 Trioptic Code 39 00h 0Dh Enabled Disabled Convert Code 39 to Code 32 (Italian Pharmacy Code) 56h Disabled Code 32 Prefix E7h Disabled Set Length(s) for Code 39 12h 13h 2 to 55 Code 39 Check Digit Verification 30h Disabled 92 Page Number
<Blue><It alic>10-11 5
<Blue><It alic>10-11 5
<Blue><It alic>10-11 6
<Blue><It alic>10-11 7
<Blue><It alic>10-11 8
<Blue><It alic>10-11 9
<Blue><It alic>10-11 9
<Blue><It alic>10-12 0
<Blue><It alic>10-12 0
<Blue><It alic>10-12 1
<Blue><It alic>10-12 1
<Blue><It alic>10-12 2
<Blue><It alic>10-12 3 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Table 10 Parameter Defaults (Continued) Parameter Transmit Code 39 Check Digit Code 39 Full ASCII Conversion Buffer Code 39 Code 93 Code 93 Parameter Number Default 2Bh 11h 71h Disabled Disabled Disabled 09h Disabled Set Length(s) for Code 93 1Ah 1Bh 4 to 55 Code 11 Code 11 0Ah Disabled Set Lengths for Code 11 1Ch 1Dh 4 to 55 Code 11 Check Digit Verification Transmit Code 11 Check Digit(s) Interleaved 2 of 5 (ITF) Interleaved 2 of 5 (ITF) 34h 2Fh Disabled Disabled 06h Disabled Set Lengths for I 2 of 5 16h 17h 14 I 2 of 5 Check Digit Verification 31h Disabled 93 Page Number
<Blue><It alic>10-12 3
<Blue><It alic>10-12 4
<Blue><It alic>10-12 4
<Blue><It alic>10-12 7
<Blue><It alic>10-12 7
<Blue><It alic>10-12 9
<Blue><It alic>10-12 9
<Blue><It alic>10-13 0
<Blue><It alic>10-13 2
<Blue><It alic>10-13 2
<Blue><It alic>10-13 3
<Blue><It alic>10-13 5 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Table 10 Parameter Defaults (Continued) Parameter Transmit I 2 of 5 Check Digit Convert I 2 of 5 to EAN 13 Discrete 2 of 5 (DTF) Discrete 2 of 5 Parameter Number Default 2Ch 52h Disabled Disabled 05h Disabled Set Length(s) for D 2 of 5 14h 15h 12 Codabar (NW - 7) Codabar 07h Disabled Set Lengths for Codabar 18h 19h 5 to 55 CLSI Editing NOTIS Editing MSI MSI 36h 37h Disabled Disabled 0Bh Disabled Set Length(s) for MSI 1Eh 1Fh 4 to 55 MSI Check Digits Transmit MSI Check Digit 32h 2Eh One Disabled 94 Page Number
<Blue><It alic>10-13 5
<Blue><It alic>10-13 6
<Blue><It alic>10-13 6
<Blue><It alic>10-13 7
<Blue><It alic>10-13 9
<Blue><It alic>10-13 9
<Blue><It alic>10-14 0
<Blue><It alic>10-14 1
<Blue><It alic>10-14 2
<Blue><It alic>10-14 2
<Blue><It alic>10-14 3
<Blue><It alic>10-14 4 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Table 10 Parameter Defaults (Continued) Parameter MSI Check Digit Algorithm Parameter Number Default 33h Mod 10/Mod 10 Chinese 2 of 5 Chinese 2 of 5 Matrix 2 of 5 Matrix 2 of 5 Matrix 2 of 5 Lengths F0h 98h Disabled F1h 6Ah Disabled F1h 6Bh F1h 6Ch 1 Length - 14 Matrix 2 of 5 Redundancy F1h 6Dh Disabled Matrix 2 of 5 Check Digit F1h 6Eh Disabled Transmit Matrix 2 of 5 Check Digit F1h 6Fh Disabled Inverse 1D Postal Codes US Postnet US Planet Transmit US Postal Check Digit UK Postal F1h 4Ah Regular 59h 5Ah 5Fh 5Bh Disabled Disabled Enabled Disabled 95 Page Number
<Blue><It alic>10-14 5
<Blue><It alic>10-14 5
<Blue><It alic>10-14 6
<Blue><It alic>10-14 7
<Blue><It alic>10-14 8
<Blue><It alic>10-14 9
<Blue><It alic>10-14 9
<Blue><It alic>10-14 9
<Blue><It alic>10-15 0
<Blue><It alic>10-15 1
<Blue><It alic>10-15 1
<Blue><It alic>10-15 2 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Table 10 Parameter Defaults (Continued) Parameter Transmit UK Postal Check Digit Japan Postal Australian Postal Parameter Number Default 60h Enabled F0h 22h Disabled F0h 23h Disabled Netherlands KIX Code F0h 46h Disabled USPS 4CB/One Code/Intelligent Mail F1h 50h Disabled UPU FICS Postal GS1 DataBar GS1 DataBar-14 F1h 63h Disabled F0h 52h Disabled GS1 DataBar Limited F0h 53h Disabled GS1 DataBar Expanded F0h 54h Disabled Convert GS1 DataBar to UPC/EAN F0h 8Dh Disabled Composite Composite CC-C Composite CC-A/B Composite TLC-39 F0h 55h Disabled F0h 56h Disabled F0h 73h Disabled 96 Page Number
<Blue><It alic>10-15 2
<Blue><It alic>10-15 3
<Blue><It alic>10-15 4
<Blue><It alic>10-15 4
<Blue><It alic>10-15 5
<Blue><It alic>10-15 5
<Blue><It alic>10-15 6
<Blue><It alic>10-15 6
<Blue><It alic>10-15 7
<Blue><It alic>10-15 7
<Blue><It alic>10-15 8
<Blue><It alic>10-15 8
<Blue><It alic>10-15 9 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Table 10 Parameter Defaults (Continued) Parameter UPC Composite Mode Composite Beep Mode GS1-128 Emulation Mode for UCC/EAN Composite Codes 2D Symbologies PDF417 MicroPDF417 Code 128 Emulation Parameter Number Default F0h 58h Never Linked F0h 8Eh F0h ABh Beep As Each Code Type is Decoded Disabled 0Fh E3h 7Bh Enabled Disabled Disabled Data Matrix F0h 24h Enabled Data Matrix Inverse F1h 4Ch Regular Maxicode QR Code QR Inverse MicroQR Aztec F0h 26h Disabled F0h 25h Enabled F1h 4Bh Regular F1h 3Dh Enabled F1h 3Eh Enabled 97 Page Number
<Blue><It alic>10-15 9
<Blue><It alic>10-16 0
<Blue><It alic>10-16 0
<Blue><It alic>10-16 1
<Blue><It alic>10-16 1
<Blue><It alic>10-16 1
<Blue><It alic>10-16 3
<Blue><It alic>10-16 3
<Blue><It alic>10-16 4
<Blue><It alic>10-16 4
<Blue><It alic>10-16 5
<Blue><It alic>10-16 5
<Blue><It alic>10-16 6 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Table 10 Parameter Defaults (Continued) Parameter Aztec Inverse Parameter Number Default F1h 4Dh Regular Symbology-Specific Security Levels Redundancy Level Security Level 4Eh 4Dh 1 0 Intercharacter Gap Size F0h 7Dh Normal Report Version Macro PDF Flush Macro PDF Buffer Abort Macro PDF Entry Page Number
<Blue><It alic>10-16 6
<Blue><It alic>10-16 7
<Blue><It alic>10-16 8
<Blue><It alic>10-16 9
<Blue><It alic>10-17 0
<Blue><It alic>10-17 1
<Blue><It alic>10-17 1 98 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies UPC/EAN Enable/Disable UPC-A Parameter # 01h To enable or disable UPC-A, scan the appropriate bar code below.
*Enable UPC-A
(01h) Enable/Disable UPC-E Parameter # 02h To enable or disable UPC-E, scan the appropriate bar code below.
*Enable UPC-E
(01h) Enable/Disable UPC-E1 Parameter # 0Ch UPC-E1 is disabled by default. 99 Disable UPC-A
(00h) Disable UPC-E
(00h) 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies To enable or disable UPC-E1, scan the appropriate bar code below. NOTE: UPC-E1 is not a UCC (Uniform Code Council) approved symbology. Enable UPC-E1
(01h) Enable/Disable EAN-8/JAN-8 Parameter # 04h To enable or disable EAN-8/JAN-8, scan the appropriate bar code below.
*Enable EAN-8/JAN-8
(01h)
*Disable UPC-E1
(00h) Disable EAN-8/JAN-8
(00h) 100 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Enable/Disable EAN-13/JAN-13 Parameter # 03h To enable or disable EAN-13/JAN-13, scan the appropriate bar code below.
*Enable EAN-13/JAN-13
(01h) Disable EAN-13/JAN-13
(00h) Enable/Disable Bookland EAN Parameter # 53h To enable or disable Bookland EAN, scan the appropriate bar code below. Enable Bookland EAN
(01h)
*Disable Bookland EAN
(00h) If you enable Bookland EAN, select a Bookland ISBN Format on page 113. Also select either Decode NOTE:
UPC/EAN Supplementals, Autodiscriminate UPC/EAN Supplementals, or Enable 978/979 Supplemental Mode in Decode UPC/EAN/JAN Supplementals on page 102. 101 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Decode UPC/EAN/JAN Supplementals Parameter # 10h Supplementals are bar codes appended according to specific format conventions (e.g., UPC A+2, UPC E+2, EAN 13+2). The following options are available:
If you select 978/979 Supplemental Mode and are scanning Bookland EAN bar codes, see Enable 378/379 Supplemental Mode Enable 978/979 Supplemental Mode If you select Ignore UPC/EAN with Supplementals, and the digital scanner is presented with a UPC/EAN plus supplemental symbol, the scanner decodes UPC/EAN and ignores the supplemental characters. If you select Decode UPC/EAN with Supplementals, the digital scanner only decodes UPC/EAN symbols with supplemental characters, and ignores symbols without supplementals. If you select Autodiscriminate UPC/EAN Supplementals, the digital scanner decodes UPC/EAN symbols with supplemental characters immediately. If the symbol does not have a supplemental, the digital scanner must decode the bar code the number of times set via UPC/EAN/JAN Supplemental Redundancy on page 105 before transmitting its data to confirm that there is no supplemental. If you select one of the following Supplemental Mode options, the digital scanner immediately transmits EAN-13 bar codes starting with that prefix that have supplemental characters. If the symbol does not have a supplemental, the digital scanner must decode the bar code the number of times set via UPC/EAN/JAN Supplemental Redundancy on page 105 before transmitting its data to confirm that there is no supplemental. The digital scanner transmits UPC/EAN bar codes that do not have that prefix immediately. NOTE:
Enable/Disable Bookland EAN on page 101 to enable Bookland EAN, and select a format using Bookland ISBN Format on page 113. Enable 977 Supplemental Mode Enable 414/419/434/439 Supplemental Mode Enable 491 Supplemental Mode Enable Smart Supplemental Mode - applies to EAN-13 bar codes starting with any prefix listed previously. Supplemental User-Programmable Type 1 - applies to EAN-13 bar codes starting with a 3-digit user-defined prefix. Set this 3-digit prefix using User-Programmable Supplementals on page 105. Supplemental User-Programmable Type 1 and 2 - applies to EAN-13 bar codes starting with either of two 3-digit user-defined prefixes. Set the 3-digit prefixes using User-Programmable Supplementals on page 105. Smart Supplemental Plus User-Programmable 1 - applies to EAN-13 bar codes starting with any prefix listed previously or the user-defined prefix set using User-Programmable Supplementals on page 105. Smart Supplemental Plus User-Programmable 1 and 2 - applies to EAN-13 bar codes starting with any prefix listed previously or one of the two user-defined prefixes set using User-Programmable Supplementals on page 105. NOTE: To minimize the risk of invalid data transmission, select either to decode or ignore supplemental characters. 102 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Decode UPC/EAN/JAN Supplementals (continued) Decode UPC/EAN/JAN Only With Supplementals
(01h) Autodiscriminate UPC/EAN/JAN Supplementals
(02h) Enable 978/979 Supplemental Mode
(05h)
*Ignore Supplementals
(00h) Enable 378/379 Supplemental Mode
(04h) Enable 977 Supplemental Mode
(07h) 103 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Decode UPC/EAN/JAN Supplementals (continued) Enable 414/419/434/439 Supplemental Mode
(06h) Enable 491 Supplemental Mode
(08h) Supplemental User-Programmable Type 1
(09h) Smart Supplemental Plus User-Programmable 1
(0Bh) Enable Smart Supplemental Mode
(03h) Supplemental User-Programmable Type 1 and 2
(0Ah) Smart Supplemental Plus User-Programmable 1 and 2
(0Ch) 104 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies User-Programmable Supplementals Supplemental 1: Parameter # F1h 43h Supplemental 2: Parameter # F1h 44h If you selected a Supplemental User-Programmable option from Decode UPC/EAN/JAN Supplementals on page 102, select User-Programmable Supplemental 1 to set the 3-digit prefix. Then select the 3 digits using the numeric bar codes beginning on<em_Emphasis> page 16-245. Select User-Programmable Supplemental 2 to set a second 3-digit prefix. Then select the 3 digits using the numeric bar codes beginning on<em_Emphasis>
page 16-245. User-Programmable Supplemental 1 User-Programmable Supplemental 2 UPC/EAN/JAN Supplemental Redundancy Parameter # 50h If you selected Autodiscriminate UPC/EAN/JAN Supplementals, this option adjusts the number of times to decode a symbol without supplementals before transmission. The range is from two to thirty times. Five or above is recommended when decoding a mix of UPC/EAN/JAN symbols with and without supplementals. The default is 10. Scan the bar code below to set a decode redundancy value. Next, scan two numeric bar codes in
<em_Emphasis>Appendix , Numeric Bar Codes. Enter a leading zero for single digit numbers. To correct an error or change a selection, scan <em_Emphasis>Cancel on page 16-246. UPC/EAN/JAN Supplemental Redundancy 105 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies UPC/EAN/JAN Supplemental AIM ID Format Parameter # F1h A0h Select an output format when reporting UPC/EAN/JAN bar codes with supplementals with AIM ID enabled:
Separate - UPC/EAN with supplementals transmit as]E<0 or 4><data>]E<1 or 2>[supp data]
Combined - EAN-8 with supplementals transmit as ]E4<data>]E<1 or 2>[supp data]
All other UPC/EAN with supplementals transmit as ]E3<data+supps>
Separate
(00h)
*Combined
(01h) Transmit UPC-A Check Digit Parameter # 28h The check digit is the last character of the symbol used to verify the integrity of the data. Scan the appropriate bar code below to transmit the bar code data with or without the UPC-A check digit. It is always verified to guarantee the integrity of the data.
*Transmit UPC-A Check Digit
(01h) Do Not Transmit UPC-A Check Digit
(00h) 106 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Transmit UPC-E Check Digit Parameter # 29h The check digit is the last character of the symbol used to verify the integrity of the data. Scan the appropriate bar code below to transmit the bar code data with or without the UPC-E check digit. It is always verified to guarantee the integrity of the data.
*Transmit UPC-E Check Digit
(01h) Do Not Transmit UPC-E Check Digit
(00h) Transmit UPC-E1 Check Digit Parameter # 2Ah The check digit is the last character of the symbol used to verify the integrity of the data. Scan the appropriate bar code below to transmit the bar code data with or without the UPC-E1 check digit. It is always verified to guarantee the integrity of the data.
*Transmit UPC-E1 Check Digit
(01h) Do Not Transmit UPC-E1 Check Digit
(00h) UPC-A Preamble Parameter # 22h Preamble characters are part of the UPC symbol, and include Country Code and System Character. There are three options for transmitting a UPC-A preamble to the host device: transmit System Character only, transmit 107 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies System Character and Country Code (0 for USA), and transmit no preamble. Select the appropriate option to match the host system. No Preamble (<DATA>)
(00h)
*System Character (<SYSTEM CHARACTER> <DATA>)
(01h) System Character & Country Code
(< COUNTRY CODE> <SYSTEM CHARACTER> <DATA>)
(02h) UPC-E Preamble Parameter # 23h Preamble characters are part of the UPC symbol, and include Country Code and System Character. There are three options for transmitting a UPC-E preamble to the host device: transmit System Character only, transmit 108 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies System Character and Country Code (0 for USA), and transmit no preamble. Select the appropriate option to match the host system. No Preamble (<DATA>)
(00h)
*System Character (<SYSTEM CHARACTER> <DATA>)
(01h) System Character & Country Code
(< COUNTRY CODE> <SYSTEM CHARACTER> <DATA>)
(02h) UPC-E1 Preamble Parameter # 24h Preamble characters are part of the UPC symbol, and include Country Code and System Character. There are three options for transmitting a UPC-E1 preamble to the host device: transmit System Character only, transmit 109 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies System Character and Country Code (0 for USA), and transmit no preamble. Select the appropriate option to match the host system. No Preamble (<DATA>)
(00h)
*System Character (<SYSTEM CHARACTER> <DATA>)
(01h) System Character & Country Code
(< COUNTRY CODE> <SYSTEM CHARACTER> <DATA>)
(02h) Convert UPC-E to UPC-A Parameter # 25h Enable this to convert UPC-E (zero suppressed) decoded data to UPC-A format before transmission. After conversion, the data follows UPC-A format and is affected by UPC-A programming selections (e.g., Preamble, Check Digit). Disable this to transmit UPC-E decoded data as UPC-E data, without conversion. Convert UPC-E to UPC-A (Enable)
(01h)
*Do Not Convert UPC-E to UPC-A (Disable)
(00h) 110 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Convert UPC-E1 to UPC-A Parameter # 26h Enable this to convert UPC-E1 decoded data to UPC-A format before transmission. After conversion, the data follows UPC-A format and is affected by UPC-A programming selections (e.g., Preamble, Check Digit). Disable this to transmit UPC-E1 decoded data as UPC-E1 data, without conversion. Convert UPC-E1 to UPC-A (Enable)
(01h)
*Do Not Convert UPC-E1 to UPC-A (Disable)
(00h) 111 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies EAN-8/JAN-8 Extend Parameter # 27h Enable this parameter to add five leading zeros to decoded EAN-8 symbols to make them compatible in format to EAN-13 symbols. Disable this to transmit EAN-8 symbols as is. Enable EAN/JAN Zero Extend
(01h)
*Disable EAN/JAN Zero Extend
(00h) 112 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Bookland ISBN Format Parameter # F1h 40h If you enabled Bookland EAN using Enable/Disable Bookland EAN on page 101, select one of the following formats for Bookland data:
Bookland ISBN-10 - The digital scanner reports Bookland data starting with 978 in traditional 10-digit format with the special Bookland check digit for backward-compatibility. Data starting with 979 is not considered Bookland in this mode. Bookland ISBN-13 - The digital scanner reports Bookland data (starting with either 978 or 979) as EAN-13 in 13-digit format to meet the 2007 ISBN-13 protocol.
*Bookland ISBN-10
(00h) Bookland ISBN-13
(01h) NOTE: For Bookland EAN to function properly, first enable Bookland EAN using Enable/Disable Bookland EAN on page 101, then select either Decode UPC/EAN Supplementals, Autodiscriminate UPC/EAN Supplementals, or Enable 978/979 Supplemental Mode in Decode UPC/EAN/JAN Supplementals on page 102. 113 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies UCC Coupon Extended Code Parameter # 55h Enable this parameter to decode UPC-A bar codes starting with digit 5, EAN-13 bar codes starting with digit 99, and UPC-A/GS1-128 Coupon Codes. UPCA, EAN-13, and GS1-128 must be enabled to scan all types of Coupon Codes.
*Enable UCC Coupon Extended Code
(01h) Disable UCC Coupon Extended Code
(00h) NOTE: See UPC/EAN/JAN Supplemental Redundancy on page 105 to control autodiscrimination of the GS1-128 (right half) of a coupon code. ISSN EAN Parameter # F1h 69h To enable or disable ISSN EAN, scan the appropriate bar code below. Enable ISSN EAN
(01h)
*Disable ISSN EAN
(00h) 114 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Code 128 Enable/Disable Code 128 Parameter # 08h To enable or disable Code 128, scan the appropriate bar code below.
*Enable Code 128
(01h) Disable Code 128
(00h) Set Lengths for Code 128 Parameter # L1 = D1h, L2 = D2h The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains. Set lengths for Code 128 to any length, one or two discrete lengths, or lengths within a specific range. NOTE: When setting lengths for different bar code types, enter a leading zero for single digit numbers. One Discrete Length - Select this option to decode only Code 128 symbols containing a selected length. Select the length using the numeric bar codes in <em_Emphasis>Appendix , Numeric Bar Codes. For example, to decode only Code 128 symbols with 14 characters, scan Code 128 - One Discrete Length, then scan 1 followed by 4. To correct an error or change the selection, scan <em_Emphasis>Cancel on page 16-246. Two Discrete Lengths - Select this option to decode only Code 128 symbols containing either of two selected lengths. Select lengths using the numeric bar codes in <em_Emphasis>Appendix , Numeric Bar Codes. For example, to decode only Code 128 symbols containing either 2 or 14 characters, select Code 128 - Two Discrete Lengths, then scan 0, 2, 1, and then 4. To correct an error or change the selection, scan <em_Emphasis>Cancel on page 16-246. Length Within Range - Select this option to decode a Code 128 symbol with a specific length range. Select lengths using numeric bar codes in <em_Emphasis>Appendix , Numeric Bar Codes. For example, to decode Code 128 symbols containing between 4 and 12 characters, first scan Code 128 -
Length Within Range. Then scan 0, 4, 1, and 2 (enter a leading zero for single digit numbers). To correct an error or change the selection, scan <em_Emphasis>Cancel on page 16-246. Any Length - Select this option to decode Code 128 symbols containing any number of characters within the digital scanners capability. 115 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Set Lengths for Code 128 (continued) Code 128 - One Discrete Length Code 128 - Length Within Range Code 128 - Two Discrete Lengths
*Code 128 - Any Length Enable/Disable GS1-128 (formerly UCC/EAN-128) Parameter # 0Eh To enable or disable GS1-128, scan the appropriate bar code below.
*Enable GS1-128
(01h) Disable GS1-128
(00h) 116 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Enable/Disable ISBT 128 Parameter # 54h ISBT 128 is a variant of Code 128 used in the blood bank industry. Scan a bar code below to enable or disable ISBT 128. If necessary, the host must perform concatenation of the ISBT data.
*Enable ISBT 128
(01h) Disable ISBT 128
(00h) 117 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies ISBT Concatenation Parameter # F1h 41h Select an option for concatenating pairs of ISBT code types:
If you select Disable ISBT Concatenation, the digital scanner does not concatenate pairs of ISBT codes it encounters. If you select Enable ISBT Concatenation, there must be two ISBT codes in order for the digital scanner to decode and perform concatenation. The digital scanner does not decode single ISBT symbols. If you select Autodiscriminate ISBT Concatenation, the digital scanner decodes and concatenates pairs of ISBT codes immediately. If only a single ISBT symbol is present, the digital scanner must decode the symbol the number of times set via ISBT Concatenation Redundancy on page 119 before transmitting its data to confirm that there is no additional ISBT symbol.
*Disable ISBT Concatenation
(00h) Autodiscriminate ISBT Concatenation
(00h) Enable ISBT Concatenation
(01h) 118 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Check ISBT Table Parameter # F1h 42h The ISBT specification includes a table that lists several types of ISBT bar codes that are commonly used in pairs. If you set ISBT Concatenation to Enable, enable Check ISBT Table to concatenate only those pairs found in this table. Other types of ISBT codes are not concatenated.
*Enable Check ISBT Table
(01h) Disable Check ISBT Table
(00h) ISBT Concatenation Redundancy Parameter # DFh If you set ISBT Concatenation to Autodiscriminate, use this parameter to set the number of times the digital scanner must decode an ISBT symbol before determining that there is no additional symbol. Scan the bar code below, then scan two numeric bar codes in <em_Emphasis>Appendix , Numeric Bar Codes to set a value between 2 and 20. Enter a leading zero for single digit numbers. To correct an error or change a selection, scan <em_Emphasis>Cancel on page 16-246. The default is 10. ISBT Concatenation Redundancy 119 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Code 39 Enable/Disable Code 39 Parameter # 00h To enable or disable Code 39, scan the appropriate bar code below.
*Enable Code 39
(01h) Disable Code 39
(00h) Enable/Disable Trioptic Code 39 Parameter # 0Dh Trioptic Code 39 is a variant of Code 39 used in the marking of computer tape cartridges. Trioptic Code 39 symbols always contain six characters. To enable or disable Trioptic Code 39, scan the appropriate bar code below. Enable Trioptic Code 39
(01h) NOTE: You cannot enable Trioptic Code 39 and Code 39 Full ASCII simultaneously.
*Disable Trioptic Code 39
(00h) 120 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Convert Code 39 to Code 32 Parameter # 56h Code 32 is a variant of Code 39 used by the Italian pharmaceutical industry. Scan the appropriate bar code below to enable or disable converting Code 39 to Code 32. NOTE: Code 39 must be enabled for this parameter to function. Enable Convert Code 39 to Code 32
(01h)
*Disable Convert Code 39 to Code 32
(00h) Code 32 Prefix Parameter # E7h Scan the appropriate bar code below to enable or disable adding the prefix character A to all Code 32 bar codes. NOTE: Convert Code 39 to Code 32 must be enabled for this parameter to function. Enable Code 32 Prefix
(01h)
*Disable Code 32 Prefix
(00h) 121 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Set Lengths for Code 39 Parameter # L1 = 12h, L2 = 13h The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains. Set lengths for Code 39 to any length, one or two discrete lengths, or lengths within a specific range. If Code 39 Full ASCII is enabled, Length Within a Range or Any Length are the preferred options. NOTE: When setting lengths for different bar code types, enter a leading zero for single digit numbers. One Discrete Length - Select this option to decode only Code 39 symbols containing a selected length. Select the length using the numeric bar codes in <em_Emphasis>Appendix , Numeric Bar Codes. For example, to decode only Code 39 symbols with 14 characters, scan Code 39 - One Discrete Length, then scan 1 followed by 4. To correct an error or change the selection, scan <em_Emphasis>Cancel on page 16-246. Two Discrete Lengths - Select this option to decode only Code 39 symbols containing either of two selected lengths. Select lengths using the numeric bar codes in <em_Emphasis>Appendix , Numeric Bar Codes. For example, to decode only Code 39 symbols containing either 2 or 14 characters, select Code 39 - Two Discrete Lengths, then scan 0, 2, 1, and then 4. To correct an error or change the selection, scan <em_Emphasis>Cancel on page 16-246. Length Within Range - Select this option to decode a Code 39 symbol with a specific length range. Select lengths using numeric bar codes in <em_Emphasis>Appendix , Numeric Bar Codes. For example, to decode Code 39 symbols containing between 4 and 12 characters, first scan Code 39 -
Length Within Range. Then scan 0, 4, 1, and 2 (enter a leading zero for single digit numbers). To correct an error or change the selection, scan <em_Emphasis>Cancel on page 16-246. Any Length - Select this option to decode Code 39 symbols containing any number of characters within the digital scanners capability. Code 39 - One Discrete Length Code 39 - Length Within Range Code 39 - Two Discrete Lengths Code 39 - Any Length 122 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Code 39 Check Digit Verification Parameter # 30h Enable this feature to check the integrity of all Code 39 symbols to verify that the data complies with specified check digit algorithm. Only Code 39 symbols which include a modulo 43 check digit are decoded. Enable this feature if the Code 39 symbols contain a Modulo 43 check digit. Enable Code 39 Check Digit
(01h)
*Disable Code 39 Check Digit
(00h) Transmit Code 39 Check Digit Parameter # 2Bh Scan a bar code below to transmit Code 39 data with or without the check digit. Transmit Code 39 Check Digit (Enable)
(01h)
*Do Not Transmit Code 39 Check Digit (Disable)
(00h) NOTE: Code 39 Check Digit Verification must be enabled for this parameter to function. 123 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Code 39 Full ASCII Conversion Parameter # 11h Code 39 Full ASCII is a variant of Code 39 which pairs characters to encode the full ASCII character set. To enable or disable Code 39 Full ASCII, scan the appropriate bar code below. Enable Code 39 Full ASCII
(01h)
*Disable Code 39 Full ASCII
(00h) NOTE: You cannot enable Trioptic Code 39 and Code 39 Full ASCII simultaneously. Code 39 Full ASCII to Full ASCII Correlation is host-dependent, and is therefore described in the ASCII Character Set Table for the appropriate interface. Code 39 Buffering - Scan & Store Parameter # 71h This feature allows the digital scanner to accumulate data from multiple Code 39 symbols. Selecting the Scan and Store option (Buffer Code 39) temporarily buffers all Code 39 symbols having a leading space as a first character for later transmission. The leading space is not buffered. Decoding a Code 39 symbol with no leading space transmits in sequence all buffered data in a first-in first-out format, plus the triggering symbol. See the following pages for further details. Select Do Not Buffer Code 39 to transmit all decoded Code 39 symbols immediately without storing them in the buffer. 124 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Code 39 Buffering - Scan & Store (continued) This feature affects Code 39 only. If selecting Buffer Code 39, we recommend configuring the digital scanner to decode Code 39 symbology only. Buffer Code 39 (Enable)
(01h)
*Do Not Buffer Code 39 (Disable)
(00h) While there is data in the transmission buffer, you cannot select Do Not Buffer Code 39. The buffer holds 200 bytes of information. To disable Code 39 buffering when there is data in the transmission buffer, first force the buffer transmission (see Transmit Buffer on page 126) or clear the buffer. Buffer Data To buffer data, enable Code 39 buffering and scan a Code 39 symbol with a space immediately following the start pattern. Unless the data overflows the transmission buffer, the digital scanner issues a low/high beep to indicate successful decode and buffering. (For overflow conditions, see Overfilling Transmission Buffer on page 126.) The digital scanner adds the decoded data excluding the leading space to the transmission buffer. No transmission occurs. Clear Transmission Buffer To clear the transmission buffer, scan the Clear Buffer bar code below, which contains only a start character, a dash (minus), and a stop character. The digital scanner issues a short high/low/high beep. The digital scanner erases the transmission buffer. 125 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies No transmission occurs. Clear Buffer NOTE: The Clear Buffer contains only the dash (minus) character. In order to scan this command, set Code 39 lengths to include length 1. Transmit Buffer There are two methods to transmit the Code 39 buffer. 1. Scan the Transmit Buffer bar code below, which includes only a start character, a plus (+), and a stop character. 2. The digital scanner transmits and clears the buffer. The digital scanner issues a low/high beep. Transmit Buffer 3. Scan a Code 39 bar code with a leading character other than a space. The digital scanner appends new decode data to buffered data. The digital scanner transmits and clears the buffer. The digital scanner signals that it transmitted the buffer with a low/high beep. The digital scanner transmits and clears the buffer. NOTE: The Transmit Buffer contains only a plus (+) character. In order to scan this command, set Code 39 lengths to include length 1. Overfilling Transmission Buffer The Code 39 buffer holds 200 characters. If the symbol just read overflows the transmission buffer:
The digital scanner indicates that it rejected the symbol by issuing three long, high beeps. No transmission occurs. The data in the buffer is not affected. Attempt to Transmit an Empty Buffer If you scan the Transmit Buffer symbol and the Code 39 buffer is empty:
A short low/high/low beep signals that the buffer is empty. No transmission occurs. The buffer remains empty. 126 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Code 93 Enable/Disable Code 93 Parameter # 09h To enable or disable Code 93, scan the appropriate bar code below. Enable Code 93
(01h)
*Disable Code 93
(00h) Set Lengths for Code 93 Parameter # L1 = 1Ah, L2 = 1Bh The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains. Set lengths for Code 93 to any length, one or two discrete lengths, or lengths within a specific range. One Discrete Length - Select this option to decode only Code 93 symbols containing a selected length. Select the length using the numeric bar codes in <em_Emphasis>Appendix , Numeric Bar Codes. For example, to decode only Code 93 symbols with 14 characters, scan Code 93 - One Discrete Length, then scan 1 followed by 4. To correct an error or to change the selection, scan <em_Emphasis>Cancel on page 16-246. Two Discrete Lengths - Select this option to decode only Code 93 symbols containing either of two selected lengths. Select lengths using the numeric bar codes in <em_Emphasis>Appendix , Numeric Bar Codes. For example, to decode only Code 93 symbols containing either 2 or 14 characters, select Code 93 - Two Discrete Lengths, then scan 0, 2, 1, and then 4. To correct an error or to change the selection, scan <em_Emphasis>Cancel on page 16-246. Length Within Range - Select this option to decode a Code 93 symbol with a specific length range. Select lengths using the numeric bar codes in <em_Emphasis>Appendix , Numeric Bar Codes. For example, to decode Code 93 symbols containing between 4 and 12 characters, first scan Code 93 -
Length Within Range. Then scan 0, 4, 1, and 2 (enter a leading zero for single digit numbers). To correct an error or change the selection, scan <em_Emphasis>Cancel on page 16-246. Any Length - Scan this option to decode Code 93 symbols containing any number of characters within the digital scanners capability. 127 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Set Lengths for Code 93 (continued) Code 93 - One Discrete Length Code 93 - Length Within Range Code 93 - Two Discrete Lengths Code 93 - Any Length 128 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Code 11 Code 11 Parameter # 0Ah To enable or disable Code 11, scan the appropriate bar code below. Enable Code 11
(01h)
*Disable Code 11
(00h) Set Lengths for Code 11 Parameter # L1 = 1Ch, L2 = 1Dh The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains. Set lengths for Code 11 to any length, one or two discrete lengths, or lengths within a specific range. One Discrete Length - Select this option to decode only Code 11 symbols containing a selected length. Select the length using the numeric bar codes in <em_Emphasis>Appendix , Numeric Bar Codes. For example, to decode only Code 11 symbols with 14 characters, scan Code 11 - One Discrete Length, then scan 1 followed by 4. To correct an error or to change the selection, scan <em_Emphasis>Cancel on page 16-246. Two Discrete Lengths - Select this option to decode only Code 11 symbols containing either of two selected lengths. Select lengths using the numeric bar codes in <em_Emphasis>Appendix , Numeric Bar Codes. For example, to decode only Code 11 symbols containing either 2 or 14 characters, select Code 11 - Two Discrete Lengths, then scan 0, 2, 1, and then 4. To correct an error or to change the selection, scan <em_Emphasis>Cancel on page 16-246. Length Within Range - Select this option to decode a Code 11 symbol with a specific length range. Select lengths using numeric bar codes in <em_Emphasis>Appendix , Numeric Bar Codes. For example, to decode Code 11 symbols containing between 4 and 12 characters, first scan Code 11 -
Length Within Range. Then scan 0, 4, 1, and 2 (enter a leading zero for single digit numbers). To correct an error or change the selection, scan <em_Emphasis>Cancel on page 16-246. Any Length - Scan this option to decode Code 11 symbols containing any number of characters within the digital scanners capability. 129 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Set Lengths for Code 11 (continued) Code 11 - One Discrete Length Code 11 - Length Within Range Code 11 - Two Discrete Lengths Code 11 - Any Length Code 11 Check Digit Verification Parameter # 34h This feature allows the digital scanner to check the integrity of all Code 11 symbols to verify that the data complies with the specified check digit algorithm. This selects the check digit mechanism for the decoded Code 11 bar code. The options are to check for one check digit, check for two check digits, or disable the feature. 130 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies To enable this feature, scan the bar code below corresponding to the number of check digits encoded in the Code 11 symbols.
*Disable
(00h) Two Check Digits
(02h) One Check Digit
(01h) 131 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Transmit Code 11 Check Digits Parameter # 2Fh This feature selects whether or not to transmit the Code 11 check digit(s). Transmit Code 11 Check Digit(s) (Enable)
(01h) NOTE: Code 11 Check Digit Verification must be enabled for this parameter to function.
*Do Not Transmit Code 11 Check Digit(s) (Disable)
(00h) Interleaved 2 of 5 (ITF) Enable/Disable Interleaved 2 of 5 Parameter # 06h To enable or disable Interleaved 2 of 5, scan the appropriate bar code below, and select an Interleaved 2 of 5 length from the following pages. Enable Interleaved 2 of 5
(01h)
*Disable Interleaved 2 of 5
(00h) 132 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Set Lengths for Interleaved 2 of 5 Parameter # L1 = 16h, L2 = 17h The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains. Set lengths for I 2 of 5 to any length, one or two discrete lengths, or lengths within a specific range. The range for Interleaved 2 of 5 lengths is 0 - 55. One Discrete Length - Select this option to decode only I 2 of 5 symbols containing a selected length. Select the length using the numeric bar codes in <em_Emphasis>Appendix , Numeric Bar Codes. For example, to decode only I 2 of 5 symbols with 14 characters, scan I 2 of 5 - One Discrete Length, then scan 1 followed by 4. To correct an error or to change the selection, scan <em_Emphasis>Cancel on page 16-246. Two Discrete Lengths - Select this option to decode only I 2 of 5 symbols containing either of two selected lengths. Select lengths using the numeric bar codes in <em_Emphasis>Appendix , Numeric Bar Codes. For example, to decode only I 2 of 5 symbols containing either 2 or 14 characters, select I 2 of 5 -
Two Discrete Lengths, then scan 0, 2, 1, and then 4. To correct an error or to change the selection, scan <em_Emphasis>Cancel on page 16-246. Length Within Range - Select this option to decode an I 2 of 5 symbol with a specific length range. Select lengths using numeric bar codes in <em_Emphasis>Appendix , Numeric Bar Codes. For example, to decode I 2 of 5 symbols containing between 4 and 12 characters, first scan I 2 of 5 -
Length Within Range. Then scan 0, 4, 1, and 2 (enter a leading zero for single digit numbers). To correct an error or change the selection, scan <em_Emphasis>Cancel on page 16-246. Any Length - Scan this option to decode I 2 of 5 symbols containing any number of characters within the digital scanners capability. NOTE: Due to the construction of the I 2 of 5 symbology, it is possible for a scan line covering only a portion of the code to transmit as a complete scan, yielding less data than is encoded in the bar code. To prevent this, select specific lengths (I 2 of 5 - One Discrete Length, Two Discrete Lengths) for I 2 of 5 applications. 133 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Set Lengths for Interleaved 2 of 5 (continued) I 2 of 5 - One Discrete Length I 2 of 5 - Length Within Range I 2 of 5 - Two Discrete Lengths I 2 of 5 - Any Length 134 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies I 2 of 5 Check Digit Verification Parameter # 31h Enable this feature to check the integrity of all I 2 of 5 symbols to verify the data complies with either the specified Uniform Symbology Specification (USS), or the Optical Product Code Council (OPCC) check digit algorithm.
*Disable
(00h) USS Check Digit
(01h) OPCC Check Digit
(02h) Transmit I 2 of 5 Check Digit Parameter # 2Ch Scan the appropriate bar code below to transmit I 2 of 5 data with or without the check digit. Transmit I 2 of 5 Check Digit (Enable)
(01h)
*Do Not Transmit I 2 of 5 Check Digit (Disable)
(00h) 135 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Convert I 2 of 5 to EAN-13 Parameter # 52h Enable this parameter to convert 14-character I 2 of 5 codes to EAN-13, and transmit to the host as EAN-13. To accomplish this, the I 2 of 5 code must be enabled, and the code must have a leading zero and a valid EAN-13 check digit. Convert I 2 of 5 to EAN-13 (Enable)
(01h)
*Do Not Convert I 2 of 5 to EAN-13 (Disable)
(00h) Discrete 2 of 5 (DTF) Enable/Disable Discrete 2 of 5 Parameter # 05h To enable or disable Discrete 2 of 5, scan the appropriate bar code below. Enable Discrete 2 of 5
(01h)
*Disable Discrete 2 of 5
(00h) 136 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Set Lengths for Discrete 2 of 5 Parameter # L1 = 14h, L2 = 15h The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains. Set lengths for D 2 of 5 to any length, one or two discrete lengths, or lengths within a specific range. The range for Discrete 2 of 5 lengths is 0 - 55. One Discrete Length - Select this option to decode only D 2 of 5 symbols containing a selected length. Select the length using the numeric bar codes in <em_Emphasis>Appendix , Numeric Bar Codes. For example, to decode only D 2 of 5 symbols with 14 characters, scan D 2 of 5 - One Discrete Length, then scan 1 followed by 4. To correct an error or to change the selection, scan <em_Emphasis>Cancel on page 16-246. Two Discrete Lengths - Select this option to decode only D 2 of 5 symbols containing either of two selected lengths. Select lengths using the numeric bar codes in <em_Emphasis>Appendix , Numeric Bar Codes. For example, to decode only D 2 of 5 symbols containing either 2 or 14 characters, select D 2 of 5
- Two Discrete Lengths, then scan 0, 2, 1, and then 4. To correct an error or to change the selection, scan <em_Emphasis>Cancel on page 16-246. Length Within Range - Select this option to decode a D 2 of 5 symbol with a specific length range. Select lengths using numeric bar codes in <em_Emphasis>Appendix , Numeric Bar Codes. For example, to decode D 2 of 5 symbols containing between 4 and 12 characters, first scan D 2 of 5 -
Length Within Range. Then scan 0, 4, 1, and 2 (enter a leading zero for single digit numbers). To correct an error or change the selection, scan <em_Emphasis>Cancel on page 16-246. Any Length - Scan this option to decode D 2 of 5 symbols containing any number of characters within the digital scanners capability. NOTE: Due to the construction of the D 2 of 5 symbology, it is possible for a scan line covering only a portion of the code to transmit as a complete scan, yielding less data than is encoded in the bar code. To prevent this, select specific lengths (D 2 of 5 - One Discrete Length, Two Discrete Lengths) for D 2 of 5 applications. 137 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Set Lengths for Discrete 2 of 5 (continued) D 2 of 5 - One Discrete Length D 2 of 5 - Length Within Range D 2 of 5 - Two Discrete Lengths D 2 of 5 - Any Length 138 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Codabar (NW - 7) Enable/Disable Codabar Parameter # 07h To enable or disable Codabar, scan the appropriate bar code below. Enable Codabar
(01h)
*Disable Codabar
(00h) Set Lengths for Codabar Parameter # L1 = 18h, L2 = 19h The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains. Set lengths for Codabar to any length, one or two discrete lengths, or lengths within a specific range. One Discrete Length - Select this option to decode only Codabar symbols containing a selected length. Select the length using the numeric bar codes in <em_Emphasis>Appendix , Numeric Bar Codes. For example, to decode only Codabar symbols with 14 characters, scan Codabar - One Discrete Length, then scan 1 followed by 4. To correct an error or to change the selection, scan <em_Emphasis>Cancel on page 16-246. Two Discrete Lengths - Select this option to decode only Codabar symbols containing either of two selected lengths. Select lengths using the numeric bar codes in <em_Emphasis>Appendix , Numeric Bar Codes. For example, to decode only Codabar symbols containing either 2 or 14 characters, select Codabar - Two Discrete Lengths, then scan 0, 2, 1, and then 4. To correct an error or to change the selection, scan <em_Emphasis>Cancel on page 16-246. Length Within Range - Select this option to decode a Codabar symbol with a specific length range. Select lengths using numeric bar codes in <em_Emphasis>Appendix , Numeric Bar Codes. For example, to decode Codabar symbols containing between 4 and 12 characters, first scan Codabar -
Length Within Range. Then scan 0, 4, 1, and 2 (enter a leading zero for single digit numbers). To correct an error or change the selection, scan <em_Emphasis>Cancel on page 16-246. Any Length - Scan this option to decode Codabar symbols containing any number of characters within the digital scanners capability. 139 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Set Lengths for Codabar (continued) Codabar - One Discrete Length Codabar - Length Within Range Codabar - Two Discrete Lengths Codabar - Any Length CLSI Editing Parameter # 36h Enable this parameter to strip the start and stop characters and insert a space after the first, fifth, and tenth characters of a 14-character Codabar symbol. Enable this feature if the host system requires this data format. NOTE: Symbol length does not include start and stop characters. 140 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Enable CLSI Editing
(01h)
*Disable CLSI Editing
(00h) NOTIS Editing Parameter # 37h Enable this parameter to strip the start and stop characters from a decoded Codabar symbol. Enable this feature if the host system requires this data format. Enable NOTIS Editing
(01h)
*Disable NOTIS Editing
(00h) 141 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies MSI Enable/Disable MSI Parameter # 0Bh To enable or disable MSI, scan the appropriate bar code below. Enable MSI
(01h) Set Lengths for MSI Parameter # L1 = 1Eh, L2 = 1Fh
*Disable MSI
(00h) The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains. Set lengths for MSI to any length, one or two discrete lengths, or lengths within a specific range. One Discrete Length - Select this option to decode only MSI symbols containing a selected length. Select the length using the numeric bar codes in <em_Emphasis>Appendix , Numeric Bar Codes. For example, to decode only MSI symbols with 14 characters, scan MSI - One Discrete Length, then scan 1 followed by 4. To correct an error or to change the selection, scan <em_Emphasis>Cancel on page 16-246. Two Discrete Lengths - Select this option to decode only MSI symbols containing either of two selected lengths. Select lengths using the numeric bar codes in <em_Emphasis>Appendix , Numeric Bar Codes. For example, to decode only MSI symbols containing either 2 or 14 characters, select MSI - Two Discrete Lengths, then scan 0, 2, 1, and then 4. To correct an error or to change the selection, scan <em_Emphasis>Cancel on page 16-246. Length Within Range - Select this option to decode a MSI symbol with a specific length range. Select lengths using numeric bar codes in <em_Emphasis>Appendix , Numeric Bar Codes. For example, to decode MSI symbols containing between 4 and 12 characters, first scan MSI - Length Within Range. Then scan 0, 4, 1, and 2 (enter a leading zero for single digit numbers). To correct an error or change the selection, scan <em_Emphasis>Cancel on page 16-246. Any Length - Scan this option to decode MSI symbols containing any number of characters within the digital scanners capability. 142 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Set Lengths for MSI (continued) NOTE: Due to the construction of the MSI symbology, it is possible for a scan line covering only a portion of the code to transmit as a complete scan, yielding less data than is encoded in the bar code. To prevent this, select specific lengths (MSI - One Discrete Length, Two Discrete Lengths) for MSI applications. MSI - One Discrete Length MSI - Length Within Range MSI - Two Discrete Lengths MSI - Any Length MSI Check Digits Parameter # 32h With MSI symbols, one check digit is mandatory and always verified by the reader. The second check digit is optional. If the MSI codes include two check digits, scan the Two MSI Check Digits bar code to enable verification of the second check digit. 143 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies See MSI Check Digit Algorithm on page 145 for the selection of second digit algorithms.
*One MSI Check Digit
(00h) Two MSI Check Digits
(01h) Transmit MSI Check Digit(s) Parameter # 2Eh Scan a bar code below to transmit MSI data with or without the check digit. Transmit MSI Check Digit(s) (Enable)
(01h
*Do Not Transmit MSI Check Digit(s) (Disable)
(00h) 144 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies MSI Check Digit Algorithm Parameter # 33h Two algorithms are possible for the verification of the second MSI check digit. Select the bar code below corresponding to the algorithm used to encode the check digit. MOD 10/MOD 11
(00h)
*MOD 10/MOD 10
(01h) Chinese 2 of 5 Enable/Disable Chinese 2 of 5 Parameter # F0h 98h To enable or disable Chinese 2 of 5, scan the appropriate bar code below. Enable Chinese 2 of 5
(01h)
*Disable Chinese 2 of 5
(00h) 145 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Matrix 2 of 5 Enable/Disable Matrix 2 of 5 Parameter # F1h 6Ah To enable or disable Matrix 2 of 5, scan the appropriate bar code below. Enable Matrix 2 of 5
(01h)
*Disable Matrix 2 of 5
(00h) 146 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Set Lengths for Matrix 2 of 5 Parameter # L1 = F1h 6Bh, L2 = F1h 6Ch The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains. Set lengths for Matrix 2 of 5 to any length, one or two discrete lengths, or lengths within a specific range. One Discrete Length - Select this option to decode only Matrix 2 of 5 symbols containing a selected length. Select the length using the numeric bar codes in <em_Emphasis>Appendix , Numeric Bar Codes. For example, to decode only Matrix 2 of 5 symbols with 14 characters, scan Matrix 2 of 5 - One Discrete Length, then scan 1 followed by 4. To correct an error or to change the selection, scan
<em_Emphasis>Cancel on page 16-246. Two Discrete Lengths - Select this option to decode only Matrix 2 of 5 symbols containing either of two selected lengths. Select lengths using the numeric bar codes in <em_Emphasis>Appendix , Numeric Bar Codes. For example, to decode only Matrix 2 of 5 symbols containing either 2 or 14 characters, select Matrix 2 of 5 - Two Discrete Lengths, then scan 0, 2, 1, and then 4. To correct an error or to change the selection, scan <em_Emphasis>Cancel on page 16-246. Length Within Range - Select this option to decode a Matrix 2 of 5 symbol with a specific length range. Select lengths using the numeric bar codes in <em_Emphasis>Appendix , Numeric Bar Codes. For example, to decode Matrix 2 of 5 symbols containing between 4 and 12 characters, first scan Matrix 2 of 5 - Length Within Range. Then scan 0, 4, 1, and 2 (enter a leading zero for single digit numbers). To correct an error or change the selection, scan <em_Emphasis>Cancel on page 16-246. 147 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Any Length - Scan this option to decode Matrix 2 of 5 symbols containing any number of characters within the digital scanners capability.
*Matrix 2 of 5 - One Discrete Length Matrix 2 of 5 - Length Within Range Matrix 2 of 5 - Two Discrete Lengths Matrix 2 of 5 - Any Length Matrix 2 of 5 Redundancy Parameter # F1h 6Dh To enable or disable Matrix 2 of 5 redundancy, scan the appropriate bar code below. Enable Matrix 2 of 5 Redundancy
(01h)
*Disable Matrix 2 of 5 Redundancy
(00h) 148 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Matrix 2 of 5 Check Digit Parameter # F1h 6Eh The check digit is the last character of the symbol used to verify the integrity of the data. Scan the appropriate bar code below to transmit the bar code data with or without the Matrix 2 of 5 check digit. Enable Matrix 2 of 5 Check Digit
(01h)
*Disable Matrix 2 of 5 Check Digit
(00h) Transmit Matrix 2 of 5 Check Digit Parameter # F1h 6Fh Scan a bar code below to transmit Matrix 2 of 5 data with or without the check digit. Transmit Matrix 2 of 5 Check Digit
(01h)
*Do Not Transmit Matrix 2 of 5 Check Digit
(00h) Inverse 1D Parameter # F1h 4Ah This parameter sets the 1D inverse decoder setting. Options are:
Regular Only - the digital scanner decodes regular 1D bar codes only. Inverse Only - the digital scanner decodes inverse 1D bar codes only. 149 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Inverse Autodetect - the digital scanner decodes both regular and inverse 1D bar codes.
*Regular
(00h) Inverse Autodetect
(02h) Inverse Only
(01h) Postal Codes US Postnet Parameter # 59h To enable or disable US Postnet, scan the appropriate bar code below. Enable US Postnet
(01h)
*Disable US Postnet
(00h) 150 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies US Planet Parameter # 5Ah To enable or disable US Planet, scan the appropriate bar code below. Enable US Planet
(01h)
*Disable US Planet
(00h) Transmit US Postal Check Digit Parameter # 5Fh Select whether to transmit US Postal data, which includes both US Postnet and US Planet, with or without the check digit.
*Transmit US Postal Check Digit
(01h) Do Not Transmit US Postal Check Digit
(00h) 151 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies UK Postal Parameter # 5Bh To enable or disable UK Postal, scan the appropriate bar code below. Enable UK Postal
(01h)
*Disable UK Postal
(00h) Transmit UK Postal Check Digit Parameter # 60h Select whether to transmit UK Postal data with or without the check digit.
*Transmit UK Postal Check Digit
(01h) Do Not Transmit UK Postal Check Digit
(00h) 152 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Japan Postal Parameter # F0h, 22h To enable or disable Japan Postal, scan the appropriate bar code below. Enable Japan Postal
(01h)
*Disable Japan Postal
(00h) 153 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Australian Postal Parameter # F0h, 23h To enable or disable Australian Postal, scan the appropriate bar code below. Enable Australian Postal
(01h)
*Disable Australian Postal
(00h) Netherlands KIX Code Parameter # F0h, 46h To enable or disable Netherlands KIX Code, scan the appropriate bar code below. Enable Netherlands KIX Code
(01h)
*Disable Netherlands KIX Code
(00h) 154 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies USPS 4CB/One Code/Intelligent Mail Parameter # F1h 50h To enable or disable USPS 4CB/One Code/Intelligent Mail, scan the appropriate bar code below. Enable USPS 4CB/One Code/Intelligent Mail
(01h)
*Disable USPS 4CB/One Code/Intelligent Mail
(00h) UPU FICS Postal Parameter # F1h 63h To enable or disable UPU FICS Postal, scan the appropriate bar code below. Enable UPU FICS Postal
(01h)
*Disable UPU FICS Postal
(00h) GS1 DataBar The variants of GS1 DataBar are DataBar-14, DataBar Expanded, and DataBar Limited. The limited and expanded versions have stacked variants. Scan the appropriate bar codes to enable or disable each variant of GS1 DataBar. 155 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies GS1 DataBar-14 Parameter # F0h 52h. Enable GS1 DataBar-14
(01h) GS1 DataBar Limited Parameter # F0h 53h. Enable GS1 DataBar Limited
(01h)
*Disable GS1 DataBar 14
(00h)
*Disable GS1 DataBar Limited
(00h) 156 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies GS1 DataBar Expanded Parameter # F0h 54h. Enable GS1 DataBar Expanded
(01h)
*Disable GS1 DataBar Expanded
(00h) Convert GS1 DataBar to UPC/EAN Parameter # F0h, 8Dh This parameter only applies to GS1 DataBar-14 and GS1 DataBar Limited symbols not decoded as part of a Composite symbol. Enable this to strip the leading '010' from DataBar-14 and DataBar Limited symbols encoding a single zero as the first digit, and report the bar code as EAN-13. For bar codes beginning with two or more zeros but not six zeros, this parameter strips the leading '0100' and reports the bar code as UPC-A. The UPC-A Preamble parameter that transmits the system character and country code applies to converted bar codes. Note that neither the system character nor the check digit can be stripped. Enable Convert GS1 DataBar to UPC/EAN
(01h)
*Disable Convert GS1 DataBar to UPC/EAN
(00h) 157 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Composite Composite CC-C Parameter # F0h 55h Scan a bar code below to enable or disable Composite bar codes of type CC-C. Enable CC-C
(01h)
*Disable CC-C
(00h) Composite CC-A/B Parameter # F0h 56h Scan a bar code below to enable or disable Composite bar codes of type CC-A/B. Enable CC-A/B
(01h)
*Disable CC-A/B
(00h) 158 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Composite TLC-39 Parameter # F0h 73h Scan a bar code below to enable or disable Composite bar codes of type TLC-39. Enable TLC39
(01h)
*Disable TLC39
(00h) UPC Composite Mode Parameter # F0h 58h Select an option for linking UPC symbols with a 2D symbol during transmission as if they were one symbol:
Select UPC Never Linked to transmit UPC bar codes regardless of whether a 2D symbol is detected. Select UPC Always Linked to transmit UPC bar codes and the 2D portion. If 2D is not present, the UPC bar code does not transmit. If you select Autodiscriminate UPC Composites, the digital scanner determines if there is a 2D portion, then transmits the UPC, as well as the 2D portion if present.
*UPC Never Linked
(00h) Autodiscriminate UPC Composites
(02h) 159 UPC Always Linked
(01h) 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Composite Beep Mode Parameter # F0h, 8Eh To select the number of decode beeps when a composite bar code is decoded, scan the appropriate bar code. Single Beep after both are decoded
(00h)
*Beep as each code type is decoded
(01h) Double Beep after both are decoded
(02h) GS1-128 Emulation Mode for UCC/EAN Composite Codes Parameter # F0h, ABh Select whether to enable or disable this mode. Enable GS1-128 Emulation Mode for UCC/EAN Composite Codes
(01h)
*Disable GS1-128 Emulation Mode for UCC/EAN Composite Codes
(00h) 160 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies 2D Symbologies Enable/Disable PDF417 Parameter # 0Fh To enable or disable PDF417, scan the appropriate bar code below.
*Enable PDF417
(01h) Disable PDF417
(00h) Enable/Disable MicroPDF417 Parameter # E3h To enable or disable MicroPDF417, scan the appropriate bar code below. Enable MicroPDF417
(01h)
*Disable MicroPDF417
(00h) Code 128 Emulation Parameter # 7Bh Enable this parameter to transmit data from certain MicroPDF417 symbols as Code 128. AIM Code ID Character
(01h) on page 84 must be enabled for this parameter to work. 161 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Enable Code 128 Emulation to transmit these MicroPDF417 symbols with one of the following prefixes:
]C1if the first codeword is 903-905
]C2if the first codeword is 908 or 909
]C0if the first codeword is 910 or 911 Disable Code 128 Emulation to transmit these MicroPDF417 symbols with one of the following prefixes:
]L3if the first codeword is 903-905
]L4if the first codeword is 908 or 909
]L5if the first codeword is 910 or 911 Scan a bar code below to enable or disable Code 128 Emulation. NOTE: Linked MicroPDF codewords 906, 907, 912, 914, and 915 are not supported. Use GS1 Composites instead. Enable Code 128 Emulation
(01h)
*Disable Code 128 Emulation
(00h) 162 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Data Matrix Parameter # F0h, 24h To enable or disable Data Matrix, scan the appropriate bar code below.
*Enable Data Matrix
(01h) Disable Data Matrix
(00h) Data Matrix Inverse Parameter # F1h 4Ch This parameter sets the Data Matrix inverse decoder setting. Options are:
Regular Only - the digital scanner decodes regular Data Matrix bar codes only. Inverse Only - the digital scanner decodes inverse Data Matrix bar codes only. Inverse Autodetect - the digital scanner decodes both regular and inverse Data Matrix bar codes.
*Regular
(00h) Inverse Autodetect
(02h) 163 Inverse Only
(01h) 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Maxicode Parameter # F0h, 26h To enable or disable Maxicode, scan the appropriate bar code below. Enable Maxicode
(01h) QR Code Parameter # F0h,25h To enable or disable QR Code, scan the appropriate bar code below.
*Enable QR Code
(01h)
*Disable Maxicode
(00h) Disable QR Code
(00h) 164 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies QR Inverse Parameter # F1h 4Bh This parameter sets the QR inverse decoder setting. Options are:
Regular Only - the digital scanner decodes regular QR bar codes only. Inverse Only - the digital scanner decodes inverse QR bar codes only. Inverse Autodetect - the digital scanner decodes both regular and inverse QR bar codes.
*Regular
(00h) Inverse Only
(01h) Inverse Autodetect
(02h) MicroQR Parameter # F1h 3Dh To enable or disable MicroQR, scan the appropriate bar code below.
*Enable MicroQR
(01h) Disable MicroQR
(00h) 165 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Aztec Parameter # F1h 3Eh To enable or disable Aztec, scan the appropriate bar code below.
*Enable Aztec
(01h) Disable Aztec
(00h) Aztec Inverse Parameter # F1h 4Dh This parameter sets the Aztec inverse decoder setting. Options are:
Regular Only - the digital scanner decodes regular Aztec bar codes only. Inverse Only - the digital scanner decodes inverse Aztec bar codes only. Inverse Autodetect - the digital scanner decodes both regular and inverse Aztec bar codes.
*Regular
(00h) Inverse Autodetect
(02h) 166 Inverse Only
(01h) 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Redundancy Level Parameter # 4Eh The digital scanner offers four levels of decode redundancy. Select higher redundancy levels for decreasing levels of bar code quality. As redundancy levels increase, the digital scanners aggressiveness decreases. Select the redundancy level appropriate for the bar code quality. Redundancy Level 1 The following code types must be successfully read twice before being decoded:
Table 11 Redundancy Level 1 Codes Code Type Code Length Codabar MSI D 2 of 5 I 2 of 5 8 characters or less 4 characters or less 8 characters or less 8 characters or less Redundancy Level 2 The following code types must be successfully read twice before being decoded:
Table 12 Redundancy Level 2 Codes Code Type Code Length All All Redundancy Level 3 Code types other than the following must be successfully read twice before being decoded. The following codes must be read three times:
Table 13 Redundancy Level 3 Codes Code Type Code Length MSI D 2 of 5 I 2 of 5 Codabar 4 characters or less 8 characters or less 8 characters or less 8 characters or less 167 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Redundancy Level 4 The following code types must be successfully read three times before being decoded:
Table 14 Redundancy Level 4 Codes Code Type Code Length All All
*Redundancy Level 1
(01h) Redundancy Level 3
(03h) Redundancy Level 2
(02h) Redundancy Level 4
(04h) Security Level Parameter # 4Dh The digital scanner offers four levels of decode security for delta bar codes, which include the Code 128 family, UPC/EAN, and Code 93. Select increasing levels of security for decreasing levels of bar code quality. There is an inverse relationship between security and digital scanner aggressiveness, so choose only that level of security necessary for any given application. Security Level 0: This setting allows the digital scanner to operate in its most aggressive state, while providing sufficient security in decoding most in-spec bar codes. Security Level 1: This default setting eliminates most misdecodes. 168 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Security Level 2: Select this option if Security level 1 fails to eliminate misdecodes. Security Level 3: If you selected Security Level 2 and misdecodes still occur, select this security level. Be advised, selecting this option is an extreme measure against mis-decoding severely out of spec bar codes. Selecting this level of security significantly impairs the decoding ability of the digital scanner. If you need this level of security, try to improve the quality of the bar codes.
*Security Level 0
(00h) Security Level 2
(02h) Security Level 1
(01h) Security Level 3
(03h) Intercharacter Gap Size Parameter # F0h, 7Dh The Code 39 and Codabar symbologies have an intercharacter gap that is typically quite small. Due to various bar code-printing technologies, this gap can grow larger than the maximum size allowed, preventing the digital scanner 169 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies from decoding the symbol. If this problem occurs, scan the Large Intercharacter Gaps parameter to tolerate these out-of-specification bar codes.
*Normal Intercharacter Gaps
(06h) Large Intercharacter Gaps
(0Ah) Report Version Scan the bar code below to report the version of software installed in the digital scanner. Report Software Version 170 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Symbologies Macro PDF Features Macro PDF is a special feature for concatenating multiple PDF symbols into one file. The scanner can decode symbols that are encoded with this feature, and can store more than 64 Kb of decoded data stored in up to 50 MacroPDF symbols. CAUTION:When printing, keep each Macro PDF sequence separate, as each sequence has unique identifiers. Do not mix bar codes from several Macro PDF sequences, even if they encode the same data. When scanning Macro PDF sequences, scan the entire Macro PDF sequence without interruption. If, when scanning a mixed sequence, the digital scanner emits two long low beeps (Low/Low) this indicates an inconsistent file ID or inconsistent symbology error. Flush Macro Buffer This flushes the buffer of all decoded Macro PDF data stored to that point, transmits it to the host device, and aborts from Macro PDF mode. Flush Macro PDF Buffer Abort Macro PDF Entry This clears all currently-stored Macro PDF data in the buffer without transmission and aborts from Macro PDF mode. Abort Macro PDF Entry 171 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Bluetooth Connection Using HID and SPP Profiles Introduction The RS507 is designed to connect over Bluetooth and also operate hand in hand with a personal computer or non-Zebra terminals. This chapter describes the Bluetooth connection modes of the RS507 to a personal computer and non-Zebra terminals. This chapter includes the following sections:
RS507 to Computer Bluetooth Connection Modes on page 172 RS507 Important hardware features on page 173 Refreshing Boot Choices on page 173 HID (Human Interface Device) Mode on page 174 Retrieving the RS507 log file on page 211 Serial Port Profile (SPP) Mode on page 188 Firmware upgrade on page 207 Bluetooth Bar Codes on page 215 RS507 to Computer Bluetooth Connection Modes The RS507 can connect to a computer over Bluetooth using the Serial Port Profile (SPP) or Human Interface Device (HID) Bluetooth modes. SSI (SCAN) Mode SSI Simple Serial Interface (SCAN) is the default mode before changing to operate in SPP or HID Bluetooth mode. SSI (SCAN) mode is also used when the RS507 is connected to a Zebra MPA-based mobile terminal or when using the PC Tool application (Upgrading using a computer and the PC Tool application on page 207). Serial Port Profile (SPP) Mode The SPP mode is used when the RS507 is connected to a computer as serial device. The data of the scanned bar codes is transferred directly to the serial port of the computer. The scanned data can be edited by a wedge application. 172 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles Human Interface Device (HID) Mode In HID mode, the RS507 is connected over Bluetooth to a computer as a keyboard device. The computer decodes the emulated key strokes sent by the RS507. The scanned data can be received by any Windows application that accepts keyboard data. The scanned data can also be processed to suit particular requirements before transmitted to a computer application using Advanced Data Formatting (ADF). For information and programming bar codes for ADF, refer to the Advanced Data Formatting Programmer Guide, p/n 72E-69680-xx (refer only to the programming bar codes that relate to bar code imagers, not Laser bar code scanners). RS507 Important hardware features The following figure shows important hardware features of the RS507 referred to in this section. Figure 64 RS507 Important hardware features Trigger Configuration Battery Restore Key Scan LEDs Scan Trigger Triggerless Configuration Refreshing Boot Choices The following boot choices are referred to in this section:
173 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles Cold Boot Cold Boot restores the RS507 operation by resetting its software. To perform a cold boot, remove and re-insert the battery onto the RS507. Clean Boot Clean Boot restores the RS507 to its factory default configuration. To perform Clean Boot:
1. Remove the battery from the RS507. 2. Press and hold the Restore Key. 3. 4. Keep holding the Restore Key pressed for about five seconds until a chirp is heard and the Scan LEDs flash Insert the Battery onto the RS507. green. The RS507 is now in its factory default configuration. Warm Boot Warm boot restores the RS507 operation by resetting its software but retains the RAM content. Warm boot is used when a log file has to be retrieved from the RS507 during application debugging. To perform warm boot, press and hold the Restore Key for more than six seconds. HID (Human Interface Device) Mode NOTE: Notebook computer manufacturers may provide their own brand of a Bluetooth stack with different connection screens. However, all stacks provide the same functionality. How to change to HID mode 1. Perform Clean Boot to the RS507:
Remove the battery from the RS507. Press and hold the Restore key. Keep holding the Restore key pressed for about five seconds until a chirp is heard and the Scan LEDs flash Install the battery onto the RS507. green. 2. Scan the HID bar code. HID bar code 3. Perform a Cold Boot by removing and re-installing the battery onto the RS507. The RS507 starts to operate and is discoverable as a keyboard. 174 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles How to format the scanned data Advanced Data Formatting (ADF) The scanned bar code data can be processed and formatted before the RS507 sends it to an application. For Zebra Advanced Data Formatting. For information and programming bar codes for ADF, refer to the Advanced Data Formatting Programmer Guide, p/n 72E-69680-xx (refer only to the programming bar codes that relate to bar code imagers, not Laser bar code scanners). How to pair and connect with a computer running Windows 7 SP1
- For best user experience, it is recommend using Secure Simple Pairing (SSP). Windows 7 SP1 NOTE:
supports Bluetooth 2.1 and as such, supports SSP.
- SSP reduces the number of steps to minimal or none when compared to legacy Bluetooth pairing.
- If the computer does not include an integrated Bluetooth module, a USB Bluetooth dongle can be used.
- Use off-the-shelf dongle that supports Bluetooth v2.1 for effortless pairing in SSP. To pair and connect the RS507:
1. Right click on Bluetooth icon and select Open Setting > Add a Device. Figure 65 HID - Open Setting Screen - Windows 7 SP1 2. From the Add a device screen, select the RS507 (shown as Bluetooth Keyboard) and click Next. 175 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles Figure 66 HID - Add Device Screen - Windows 7 SP1 The computer connects to the RS507 and the following screen is displayed. Figure 67 HID - Device Successfully Added Screen - Windows 7SP1 176 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles How to pair and connect with a computer running Windows XP SP3 and Bluetooth 2.1 For best user experience it is recommended to use Secure Simple Pairing (SSP) that is supported in Bluetooth V2.1. SSP reduces the number of steps to minimal or none when compared to legacy Bluetooth pairing. To pair and connect with a computer:
1. Verifying that Windows XP Service Pack 3 (SP3) is installed. 2. Since Windows XP does not support Bluetooth V2.1, load new Bluetooth stack that supports Bluetooth V2.1 by either:
3. Following the instructions on the Broadcom site at: www.broadcom.com/support/bluetooth/update.php and install the WIDCOMM stack. 4. Purchasing an off-the-shelf USB Bluetooth dongle that supports Bluetooth V2.1 and installing the provided Bluetooth V2.1 drivers. Using USB Bluetooth dongle is the only option if the computer does not include an integrated Bluetooth module. When using earlier Bluetooth versions, you will need to enter passkey 12345 or disable authentication by scanning:
Disable Authentication bar code Pair and connect the RS507 as follows:
1. Right click the Bluetooth icon on the computer desktop tray. Figure 68 HID - Bluetooth Icon On Computer Desktop Tray - Windows XP SP3 and Bluetooth V2.1 Bluetooth Icon Or From My Bluetooth Places > Bluetooth Tasks bar, select Add a Bluetooth Device. Figure 69 HID - My Bluetooth Places Screen - Windows XP SP3 and Bluetooth V2.1 Add a Bluetooth Device 2. Check the My device set up and ready to be found box and click Next. 177 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles Figure 70 HID - Bluetooth Setup Screen - Windows XP SP3 and Bluetooth V2.1 3. Verify that the RS507 is found by the Host in the Bluetooth Device Selection screen. Select the RS507 and click Next to start the SSP process. Figure 71 HID - Bluetooth Device Selection Screen - Windows XP SP3 and Bluetooth V2.1 The Secure Simple Pairing starts. 178 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles Figure 72 HID - Bluetooth Security Setup Screen - Windows XP SP3 and Bluetooth V2.1 If earlier Bluetooth stack is used (not equipped with SSP), check the Let me choose my own passkey button, enter 12345 (or scan the Disable Bluetooth Authentication bar code) and click Next. The pairing process completes and the RS507 connects without any further intervention. Figure 73 HID - Bluetooth Pairing Success Screen - Windows XP SP3 and Bluetooth V2.1 Upon successful Bluetooth pairing, the Bluetooth icon in the computer desktop tray turns green. Figure 74 HID - Bluetooth Icon In Computer Desktop Tray - Windows 7SP1 Bluetooth Icon NOTE: The next time you explore the Bluetooth Devices Selection screen, the RS507 will show connected. 179 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles Figure 75 HID - Select a device Screen - Windows XP SP3 and Bluetooth V2.1 1. If pairing results in an error, remove the RS507 from the Bluetooth stack by selecting it on the My Bluetooth Places \ Entire Bluetooth Neighborhood screen, right click and select Disable. Figure 76 HID - Entire Bluetooth Neighborhood Screen - Windows XP SP3 and Bluetooth V2.1 2. Scan the Un-Pairing bar code. Un-pairing bar code 3. The RS507 emits one string of high/low beeps indicating that Bluetooth communication with the PC is removed. If that does not help, perform Clean Boot (see Clean Boot on page 174) the RS507 and start the Bluetooth pairing again. 4. 180 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles How to pair and connect with other devices The RS507 can pair and connect as an emulated keyboard using the Bluetooth HID profile to other devices that support HID using the device discovery feature. NOTE: Not all devices support HID. If the RS507 is not discovered as a keyboard (when it is in HID mode), consult the device information. Reconnecting Automatic reconnection The RS507 maintains Bluetooth communication with the connected device within a range of 10 meters (30 feet). When the RS507 fails to establish connection or connection is lost during operation:
1. The RS507 emits one string of low/high beeps. 2. The RS507 automatically attempts to reconnect to the computer for 30 seconds (the Scan LEDs flash green). Manual reconnection to Restore Lost Bluetooth Connection If automatic re-connection fails, verify that the RS507 is within Bluetooth range and briefly press the small Restore key on the side of the RS507 to reconnect. 1. The RS507 Scan LEDs start to flash green, indicating that the RS507 is attempting to establish connection with the computer. 2. The Scan LEDs turn off and the RS507 emits one string of low/high beeps indicating that the RS507 is connected and ready for scanning. NOTE: When the RS507 is in HID connection mode, pressing the Restore key after any RS507 boot reconnects the RS507 to the last paired device. Connection is established as long as the link key (the authentication key used to establish a link between devices) on the RS507 side is not deleted. How to demonstrate HID connection with a computer Following a successful connection, data can be scanned into any Windows application field that accepts keyboard data; for example, the Notepad application. To scan a bar code:
1. Run the Notepad application. 2. Scan a bar code. The scanned bar code information is displayed on the Notepad window. Figure 77 HID - Scanned Bar Code Information On Notepad Window 181 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles Country keyboard type change While in HID mode, the RS507 supports several keyboard layouts. To change the North American Standard Keyboards layout (see bar code marked by * below) to a different country code layout, scan the required bar code corresponding to the country keyboard type. 182 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles Connecting multiple RS507 into single device Multiple RS507 devices can concurrently connect to one device application. In HID connection mode, all RS507 devices enter their virtual key strokes into the same data field of the device application. Using random PIN code To establish a Bluetooth connection with a computer using a random PIN code:
183 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles 1. Scan the bar code of the Variable PIN code. Variable PIN Code bar code 2. On the Windows Explorer screen, click the My Bluetooth Places icon. 3. From the Bluetooth Tasks bar, click on Add a Bluetooth Device to start the Bluetooth Setup wizard. Figure 78 HID - Using Random PIN Code - My Bluetooth Places Screen Add a Bluetooth Device 4. On Bluetooth Setup screen, click the Next button. Figure 79 Using Random PIN Code - Bluetooth Setup Wizard Screen 5. On the Bluetooth Device Selection screen, select the RS507 displayed as a keyboard icon (MXA4NH80 is the serial number of the RS507) and click the Next button. 184 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles Figure 80 HID - Using Random PIN Code - Bluetooth Device Selection Screen The RS507 beeps once indicating that it is waiting for an alphanumeric passkey entry. Figure 81 HID - Using Random PIN Code - Bluetooth Security / Alphanumeric Passkey Entry Screen 6. Enter the provided passkey by scanning the alphanumeric bar codes shown below. Alphanumeric Keyboard Bar Codes 0 2 1 185 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles 3 5 7 9 4 6 8 CANCEL 7. Scan the End of Message bar code if the PIN code has less than 16 characters. End of Message bar code The RS507 emits a short high beep while scanning the alphanumeric bar codes and a high/low/high/low upon scanning the End of Message bar code. When the passkey is scanned successfully, Success! is displayed on the Bluetooth Security Setup screen. 186 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles Figure 82 HID - Using Random PIN Code - Bluetooth Security Screen / Passkey Scanned Successfully 8. Click Next to complete the association. The RS507 emits a short string of low/high beeps to indicate a successful pairing. When the connection is completed, the color of the Bluetooth icon on the quick launch bar of the PC is blue and green. Figure 83 HID - Using Random PIN Code - Successful Pairing Bluetooth Icon Bluetooth Icon How to return to SSI (SCAN) mode To return to SSI mode so that connection to Zebra terminals can be established, perform the following:
1. Perform Clean Boot to the RS507:
Remove the battery from the RS507. Press and hold the Restore key. Install the Battery onto the RS507. Keep holding the Restore key pressed for about five seconds until a chirp is heard and the Scan LEDs flash green. 2. Scan the SSI (SCAN) bar code.. NOTE: The SCAN (SCAN) bar code can also be scanned directly from a computer screen. SSI (SCAN) bar code 187 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles 3. Perform a Cold Boot by removing and re-installing the battery onto the RS507 (see Cold Boot on page 174). The RS507 starts to operate using SSI (SCAN) mode. Serial Port Profile (SPP) Mode The RS507 can connect to a computer or other device that supports Bluetooth SPP interface as either a Master
(the RS507 initiate the connection) or a Slave (the computer or other device initiate the connection and the RS507 is discovered by the computer). NOTE: Notebook computer manufacturers may provide their own brand of a Bluetooth stack with different connection screens. However, all stacks provide the same functionality. How to change to SPP mode
- Since the SPP connection does not support automatic acknowledgement when the data is received by NOTE:
the computer application, a BELL indication is used. The BELL indication allows the computer application to send single binary character 0x07 to the RS507 (as defined in ASCII table). Upon receiving the BELL character, the RS507 beeps. To configure the beep, see BELL Indication (SPP mode only) on page 218. To change the RS507 to SPP mode:
1. Perform Clean Boot to the RS507 (see Clean Boot on page 174):
Remove the battery from the RS507. Press and hold the Restore key. Install the Battery onto the RS507. Keep holding the Restore key pressed for about five seconds until a chirp is heard and the Scan LEDs flash green. 2. Scan SPP bar code. SPP bar code 3. Perform a Cold Boot by removing and re-installing the battery onto the RS507. The RS507 starts to operate and is discoverable as a Bluetooth serial device (like a camera). How to format the scanned data the data Advanced Data Formatting (ADF) The scanned bar code data can be processed and formatted before the RS507 sends it to an application using Advanced Data Formatting (ADF). For information and programming bar codes for ADF, refer to the Advanced Data Formatting Programmer Guide, p/n 72E-69680-xx (refer only to the programming bar codes that relate to bar code imagers, not Laser bar code scanners). 188 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles Wedge The scanned bar code data can also be processed and formatted before the RS507 send it to the application by using a 3rd party data wedge application. Such wedge applications are available for free download from 3rd party providers sites. How to pair and connect with a computer running Windows 7 SP1 SPP connection with RS507 as a Master 1. Right click on the Bluetooth icon and select Open Setting to add a COM port Figure 84 SPP - Open Setting Screen - Windows 7 SP1 2. Select the COM Ports tab and click Add. 189 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles Figure 85 SPP - Bluetooth Settings - Com Ports Tab 3. Check the Incoming box and click OK. Figure 86 SPP - Bluetooth Settings - Add Com Port Screen 4. Click the Hardware tab to retrieve the Bluetooth radio BD address. 190 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles Figure 87 SPP - Bluetooth Settings - Bluetooth Radio BD Address 5. Run the PC Tool application. Figure 88 SPP - PC Tool application 6. Click the Show Bluetooth Address barcode button. 7. Manually enter the BD address to the PC Tool application and click the Generate button. 191 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles Figure 89 SPP - PC Tool Application - Bar Code Generator 8. Open the incoming COM port assigned (for example, COM7) in the application. After the COM port is opened the computer connects to the RS507 and a beep will sound. For demonstration, refer to <Blue><Italic>How to demonstrate SPP connection with a computer on page 11-203. NOTE:
If the COM port is not opened prior to the connection, the RS507 will fail to connect. 9. To start the connection process:
Aim the RS507 at about 7" (18 cm) away from the computer screen and scan the bar code of the BD address of the computer (or the other target device). The RS507 Scan LEDs start flashing green indicating that the RS507 is attempting to establish connection with the computer. The following notifications are displayed upon successful connection. 192 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles Figure 90 SPP - Device Successfully Added Screen NOTE:
In case you do not hear the connected beep on the RS507, press on the RS507 Restore key to connect. SPP connection with RS507 as a Slave 1. Right click the Bluetooth icon and select Open Settings > Add Device. Figure 91 SPP connection with RS507 as a Slave - Open Settings 2. Select the RS507 (see Bluetooth Camera icon below) and click Next 193 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles Figure 92 SPP connection with RS507 as a Slave - Add Device Screen 3. The computer attempts to connect to the RS507. Figure 93 SPP connection with RS507 as a Slave - Device Successfully Added Screen 194 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles 4. Open the incoming COM port assigned (for example, COM7) in the application. After the COM port is opened the computer connects to the RS507 and a beep will sound. For demonstration, refer to <Blue><Italic>How to demonstrate SPP connection with a computer on page 11-203. NOTE:
Make sure the same COM port is closed in other applications. How to pair and connect with a computer running Windows XP SP3 SPP connection with RS507 as a Master To pair the RS507 with a computer:
1. Find the Bluetooth Device (BD) address of the computer (or the target device) in Bluetooth Configuration >
Diagnostics tab. Figure 94 Bluetooth Configuration Screen - Windows XP SP3 2. Run the PC Tool application. 195 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles Figure 95 PC Tool Application Screen 3. Click the Show Bluetooth Address barcode button. 4. Manually enter the computer BD address and click the Generate button. Figure 96 PC Tool Application - Bar Code Generator NOTE: The PC Tool application retains the last BD address entered. To recreate a new bar code image, enter the BD address and click the Generate button. 5. To start the connection process, aim the RS507 at about 7" (18 cm) away from the front of the computer screen. 6. Scan the bar code of the BD address of the computer (or other target device). 196 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles 7. The RS507 Scan LEDs start flashing green indicating that the RS507 is attempting to establish connection with the computer. 8. Check the Always allow this device to access this service box and click OK. Figure 97 Bluetooth Service Authorization Dialog NOTE: When using an earlier Bluetooth version that is not equipped with Secure Simple Pairing, a passkey is required only for the first connection. Check the Let me choose my own passkey button, enter 12345 and click Next. Upon successful Bluetooth pairing, RS507 bleeps and the Bluetooth icon in the computer desktop tray turns green. Figure 98 Bluetooth Icon In Computer Desktop Tray - Windows XP SP3 Bluetooth Icon At this point, the RS507 is ready to scan and send bar codes over the assigned serial port. 9. Find the assigned serial incoming port, right click the Bluetooth icon and select Bluetooth Configuration >
Client Applications tab. NOTE: Do not confuse the Bluetooth serial port assigned as Incoming (RS507 initiates the connection) with the Bluetooth serial port assigned as Outgoing (The computer initiates the connection and RS507 is discovered -
Slave Mode). 197 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles Figure 99 Bluetooth Configuration Screen - Windows XP SP3 The COM ports can also be identified through the Control Panel. To access the Bluetooth COM port allocation through the Control Panel:
1. From the Control Panel screen, open the Bluetooth Devices screen on the computer. Figure 100 Bluetooth Devices screen - Windows XP SP3 2. Click the COM Ports tab and verify that a COM port is assigned. If no COM port is assigned, click the Add button and select Incoming (device initiates the connection) to set the RS507 as Master and the computer as Slave. 3. Click OK to complete the settings. 198 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles Figure 101 Add COM Port Screen - Windows XP SP3 4. After the Bluetooth COM port is assigned, run the application on the computer and open the COM port assigned as Incoming in the application (for example, COM7). After the COM port is opened, the computer connects to the RS507 and a beep will sound. For demonstration, refer to <Blue><Italic>How to demonstrate SPP connection with a computer on page 11-203. NOTE:
COM port is closed in other applications. If the COM port is not opened prior to the connection, the RS507 will fail to connect. Make sure the same SPP connection with RS507 as a Slave 1. Right click the Bluetooth icon on the computer desktop tray. Figure 102 Bluetooth Icon In Computer Desktop Tray - SPP connection with RS507 as a Slave Bluetooth Icon Or From My Bluetooth Places screen, select Bluetooth Tasks bar and select Add a Bluetooth Device. Figure 103 My Bluetooth Places Screen - SPP connection with RS507 as a Slave Add a Bluetooth Device 2. Check My device set up and ready to be found box and click Next. 199 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles Figure 104 Bluetooth Setup Screen - SPP connection with RS507 as a Slave 3. Verify that the RS507 is found by the Host, select the RS507 that you want to add and click Next. Figure 105 Bluetooth Device Selection Screen - SPP connection with RS507 as a Slave 4. Check the Serial Port box and click Next. 200 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles Figure 106 Bluetooth Service Selection - Serial Port Screen - SPP connection with RS507 as a Slave 5. The Secure Simple Pairing starts and a shortcut will be created. Click OK. Figure 107 Bluetooth Shortcut Confirmation Box - SPP connection with RS507 as a Slave 6. Once completed click Finish. Figure 108 Bluetooth Setup Wizard - SPP connection with RS507 as a Slave NOTE: When using an earlier Bluetooth version that is not equipped with Secure Simple Pairing, a passkey is required only for the first connection. Check the Let me choose my own passkey button, enter 12345 and click Next. 201 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles The RS507 is ready to scan and send bar codes over the assigned serial port. 7. Find the assigned serial Outgoing port, right click the Bluetooth icon and select Bluetooth Configuration and the Local Services tab. NOTE: Do not confuse the Bluetooth serial port assigned as Incoming (RS507 initiates the connection) with the Bluetooth serial port assigned as Outgoing (The computer initiates the connection and RS507 is discovered -
Slave Mode). Figure 109 Bluetooth Configuration Screen - SPP connection with RS507 as a Slave 8. Open the COM port assigned as Incoming COM port in the application (for example, COM7). After the COM port is opened the computer connects to the RS507 and a beep will sound. For demonstration, refer to How to demonstrate SPP connection with a computer on page 203. NOTE:
COM port is closed in other applications. If the COM port is not opened prior to the connection, the RS507 will fail to connect. Make sure the same How to pair and connect with other devices The RS507 can pair and connect as a serial port device using the Bluetooth SPP profile to other devices that support SPP using the device either the RS507 as a Master (recommended) or the device discovery feature. The PC Tool application can be used to generate the Bluetooth Device (BD) address of the target device for testing. Otherwise this bar code can be printed on a label and affixed to the device. NOTE: Not all devices support SPP. If the RS507 is not discovered as a serial port device (camera), check with the device vendor. 202 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles Reconnecting Automatic reconnection The RS507 maintains Bluetooth communication with the connected device within a range of 10 meters (30 feet). When the RS507 fails to establish connection or connection is lost during operation:
The RS507 emits one string of low/high beeps. The RS507 automatically attempts to reconnect to the computer for 30 seconds (the Scan LEDs flash green). Manual reconnection to Restore Lost Bluetooth Connection If automatic re-connection fails, verify that the RS507 is within Bluetooth range and briefly press the small Restore key on the side of the RS507 to reconnect. The RS507 Scan LEDs start to flash green, indicating that the RS507 is attempting to establish connection with the computer. The Scan LEDs turn off and the RS507 emits one string of low/high beeps indicating that the RS507 is connected and ready for scanning. NOTE: When the RS507 is in SPP connection mode, pressing the Restore key after a Warm or Cold boot reconnects the RS507 to the last paired device. Connection is established as long as the link key on the device side is not deleted (the authentication key used to establish a link between devices). How to demonstrate SPP connection with a computer Once SPP connection is established, an application is required to demonstrate the RS507. To scan a bar code:
1. 2. Run a hyper terminal application such as the Tera Term application. If the RS507 is still connected to the PC Tool application, close the COM port on the PC Tool application.
(http://www.ayera.com/teraterm/download.cfm). Figure 110 Tera Term Application Screen 3. Select the virtual COM port set for the RS507 connection. 203 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles 4. Scan bar codes. Successful decoding of a bar code is indicated by one green flash of the Scan LEDs and a high beep sound.In case of Bluetooth disconnection, the RS507 emits one high beep followed by four low beeps. Figure 111 Tera Term Entry Screen Connecting multiple RS507 into single device Multiple RS507 units can be connected a single computer running an application that accepts more than one RS507, each with its own assigned COM port. The number of RS507 units concurrently connected is depended on the computer's Bluetooth stack. How to return to SSI (SCAN) mode To change the RS507 to SSI (SCAN) mode:
1. Perform Clean Boot to the RS507:
Remove the battery from the RS507. Press and hold the Restore key. Install the Battery onto the RS507. Keep holding the Restore key pressed for about five seconds until a chirp is heard and the Scan LEDs flash green. 2. Scan the SSI (SCAN) bar code. SSI (SCAN) bar code 3. Perform a Cold Boot by removing and re-installing the battery onto the RS507. The RS507 starts to operate under SSI (SCAN) for connection to Zebra terminals. 204 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles Switching between SSI (SCAN), HID and SPP To switch the RS507 from one mode to another:
1. Perform Clean Boot to the RS507:
Remove the battery from the RS507. Press and hold the Restore key. Install the Battery onto the RS507. Keep holding the Restore key pressed for about five seconds until a chirp is heard and the Scan LEDs flash green. 2. Scan the required profile bar code (see the following bar codes). SPP bar code SSI (SCAN) bar code HID bar code 3. Perform a Cold Boot by removing and re-installing the battery onto the RS507 (see <em_Emphasis>Cold Boot on page 11-174). The RS507 starts to operate and is also discoverable as a keyboard (HID) or serial device
(SPP). IMPORTANT:
In Win 7 SP1, when switching between SPP connection and HID connection and vice versa, the RS507 device must be removed from the computer pairing list. 4. Remove the RS507 from the computer Bluetooth stack by right clicking the Bluetooth icon and selecting Show Bluetooth Devices 205 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles Figure 112 Computer Bluetooth Stack Screen - Switching Between SSI (SCAN), HID and SPP 5. Right click the RS507 icon (camera icon) and select Remove device Figure 113 Device Screen - Switching Between SSI (SCAN), HID and SPP IMPORTANT:
In Win XP SP3:, when switching between SPP connection and HID connection and vice versa, the RS507 device must be removed from the computer pairing list, to remove the RS507 please do as follow:
206 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles 6. Remove the RS507 from the Bluetooth stack by selecting it on the My Bluetooth Places > Entire Bluetooth Neighborhood, right click and select Disable. Figure 114 Entire Bluetooth Neighborhood Screen - Switching Between SSI (SCAN), HID and SPP Firmware upgrade Upgrading using a computer and the PC Tool application Older RS507 devices can be upgraded and re-flashed with a new firmware. The update is performed by downloading the firmware to the RS507 flash memory. If download fails, the previous firmware remains operational. The firmware remains inside the RS507 memory even when powering the RS507 off/on (removing and re-installing the battery). To update the firmware of the RS507:
1. Install a fully charged RS507 battery and wait until the RS507 emits a beep and stops, indicating that the power up process is completed. 2. Press the Scan trigger and verify that the Scan LEDs illuminate and the aimer light is shown while the scan trigger is pressed. 207 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles 3. Establish SSI connection by scanning the SSI (SCAN) bar code to change the RS507 mode to SSI (SCAN) mode. The SSI (SCAN) mode allows the RS507 to communicate with the computer through SPP during the firmware update session. The SSI (SCAN) bar code can also be scanned directly from a computer screen. SSI (SCAN) bar code 4. Perform a Cold Boot by removing and re-installing the battery onto the RS507. The RS507 starts to operate under SSI mode using an SPP connection with the computer. Notice the COM port that was assigned to the RS507. 5. On the computer, run the PC Tool application. Figure 115 PC Tool Application - Firmware Upgrade NOTE: When using older Bluetooth version, enter PIN code 12345. 6. Follow the instructions for SPP connection with RS507 as a Master on page 189 under Windows 7 SP1 or SPP connection with RS507 as a Master on page 195 under Windows XP SP3 except, this time use it while the RS507 is in SSI (SCAN) mode. 7. Once paired and connected to the computer, select Bluetooth COM port. 8. Click the Open button. The RS507 information is displayed on the Device Info fields. 208 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles Figure 116 PC Tool Application Device Info fields - Firmware Upgrade 9. Press the Browse button, select the RS507 firmware dat file (for example: PAAACS00-004-N09D0.dat) and press the Open button. Figure 117 Firmware Update - dat File 209 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles 10. Press the Update Firmware button to start the firmware update process. Figure 118 Firmware Update - Start Process 11. If the battery level is too low, the firmware update will not start. In such case, replace the battery with a fully charged battery, close the Com port, re-open the Com port and again, start to download. 210 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles Figure 119 Download Screen - PC Tool Application 12. During firmware update, the RS507 Scan LEDs blink red. When the firmware update successfully ends, wait for RS507 internal flash programming to complete (the Scan LEDs turn off). At the end of the firmware update, the RS507 performs Warm Boot (see Warm Boot on page 174). 13. Perform Clean Boot to the RS507:
Remove the battery from the RS507. Press and hold the Restore key. Install the battery onto the RS507. Keep holding the Restore key pressed for about five seconds until a chirp is heard and the Scan LEDs flash green. At this point, the RS507 firmware is updated and ready for connection with the updated firmware. NOTE: After Clean Boot is performed, the RS507 defaults are changed to SSI (SCAN) mode to interface to Zebra terminals. Upgrading with a Zebra terminal Firmware update utility application was included in the CAB files provided for WT40x0, MC9090, MC709x, MC3090 and VC5090. For step-by-step instructions, refer to <Blue><Italic>Imager Firmware Update on page 8-64. For firmware update of other terminals, use the PC Tool application. Retrieving the RS507 log file The events of the RS507 software log includes debug information and SW diagnostics logged during the RS507 operation. The log is saved on the RAM of the RS507 and is lost once the RS507 battery is removed. 211 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles To retrieve the RS507 log file:
1. If the RS507 is stuck or do not behave as expected once connected to the application, do not remove the battery. Instead, perform a Warm Boot by pressing and holding the Restore Key for more than six seconds. 2. Establish SSI connection by scanning the SSI (SCAN) bar code to change the RS507 mode to SSI (SCAN) mode. The SSI (SCAN) mode allows the RS507 to communicate with the computer through SPP during the firmware update session. The SSI (SCAN) bar code can also be scanned directly from a computer screen. SSI (SCAN) bar code 3. Perform a Warm Boot by pressing and holding the Restore Key for more than six seconds. The RS507 starts to operate under SSI (SCAN) using an SPP connection with the computer. 4. Locate the COM port that was assigned to the RS507. 5. On the computer, run the PC Tool application. Figure 120 PC Tool Application Screen 6. Click the Show Bluetooth Address barcode button. 7. Manually enter the computer BD address and click the Generate button. 212 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles Figure 121 Bar Code Generator - PC Tool Application
. NOTE: The PC Tool application retains the last BD address entered so next time press the Generate button to recreate the bar code image. 8. To start the connection process, aim the RS507 at about 7" (18 cm) away from the front of the computer screen and scan the bar code of the computer (or the other target device) BD address. The RS507 Scan LEDs start flashing green indicating that the RS507 is attempting to establish connection with the computer. If the following Windows pops up, check the box Always allow this device to access this service and click OK. 9. 10. The RS507 bleeps, establishes the SSI over SPP connection and is ready log file retrieval. 11. Select Bluetooth COM port assigned to the RS507. NOTE: The RS507 can connect to a computer or other device that supports Bluetooth Serial Port Profile interface as either a Master (the RS507 initiate the connection) or a Slave (the computer or other device initiate the connection and the RS507 is discovered by the computer). 12. Click the Open button - the application displays the RS507 status information. 213 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles Figure 122 RS507 Status Information - PC Tool Application 13. Click the Get Log button to download the RS507 log file. 14. When you expect a large log file, check the Enable compress log to get a compressed log file in .zip format. The log file is saved on the computer at the same folder of the PC Tool application. from the same directory of the PC Tool application. 15. 214 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles Figure 123 Retrieve RS507 Log File - PC Tool Application Bluetooth Bar Codes NOTE: Bar codes marked with * Indicate default configuration. Bluetooth Authentication Control Bluetooth Authentication The Bluetooth Authentication parameter enables/disables Bluetooth authentication connection. Disable 215 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles
*Enable Bluetooth Automatic Reconnection Control Bluetooth Auto Reconnection The Bluetooth Auto Reconnection parameter sets Bluetooth automatic reconnection when unexpected Bluetooth disconnection occurs.
*None On out of range On power up Both on power up or out of range Reconnect Attempts Timeout The Reconnect Attempts parameter defines the auto reconnect attempt time duration after Bluetooth disconnection.
*30 seconds 35 seconds 216 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles 45 seconds 55 seconds 40 seconds 50 seconds 60 seconds Force Pairing Save The Force Pairing Save parameter enables/disables saving the remote Bluetooth address after each Bluetooth connection attempt. When this parameter is disabled, the Bluetooth address is saved only after a successful Bluetooth connection. If the Bluetooth connection fails, the Bluetooth address is not saved. NOTE: This parameter is effective when the RS507 connects as Master. Disable
*Enable 217 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles Bell Indication Control BELL Indication (SPP mode only) The BELL Indication parameter configures the beep tone sequence of the bell indication when a bell character is received. This feature is valid only in SPP mode for PC connection.
*Disable Enable GP_2_HI_SHORT GP_4_HI_SHORT GP_1_LO_SHORT GP_1_HI_SHORT GP_3_HI_SHORT GP_5_HI_SHORT 218 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles GP_2_LO_SHORT GP_4_LO_SHORT GP_1_HI_LONG GP_3_HI_LONG GP_5_HI_LONG 219 GP_3_LO_SHORT GP_5_LO_SHORT GP_2_HI_LONG GP_4_HI_LONG GP_1_LO_LONG 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles GP_2_LO_LONG GP_4_LO_LONG GP_FAST_WARBLE GP_HI_LO GP_HI_LO_HI GP_3_LO_LONG GP_5_LO_LONG GP_SLOW_WARBLE GP_LO_HI GP_LO_HI_LO 220 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles GP_HI_HI_LO_LO APP_CLICK APP_ERROR_BEEP LOW_CLICK Bluetooth HID Country Keyboard Types (Country Codes) Scan the bar code corresponding to the keyboard type. 221 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles 222 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles Bluetooth Profile Control To configure the RS507 to a Bluetooth Connection Mode:
1. Scan the required profile bar code (see the following bar codes). 2. Perform a cold boot by removing and re-installing the battery onto the RS507. The RS507 starts to operate and is also discoverable as a keyboard (HID) or serial device (SPP). SPP bar code 223 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY RS507 Bluetooth Connection Using HID and SPP Profiles HID bar code Scan bar code Bluetooth Pairing Control Remove Bluetooth Connection Remove the Bluetooth connection to allow the RS507 to connect to another PC or before switching the RS507 to a different connection profile. To remove the Bluetooth connection, scan an un-pairing bar code to disconnect the RS507 from the PC. Un-pairing bar code Label The RS507 emits one string of high/low beeps indicating that Bluetooth communication with the PC is removed. Another way to remove a Bluetooth connection is removing and re-installing the RS507 battery. 224 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Specifications Technical Specifications Imager Table 15 Imager Technical Specifications Item Physical Characteristics Dimensions (H x W x L):
Weight:
Description Triggerless, standard battery: 2.9 x 5.3 x 7.4 cm/1.16 x 2.1 x 2.92 in. Triggerless, extended battery: 3.6 x 5.3 x 7.4 cm/1.42 x 2.1 x 2.92 in. Triggered, standard battery: 2.9 x 5.3 x 7.4 cm /1.16 x 2.1 x 2.92 in. Triggered, corded (cord length not included): 3.3 x 5.3 x 7.4 cm/1.3 x 2.1 x 2.92 in. Triggerless, standard battery: 121.4 g/4.3 oz. Triggerless, extended battery: 146.4 g/5.2 oz. Triggered, standard battery: 134.8 g/4.8 oz. Triggered, corded: 140.8 g/5.0 oz. Performance Characteristics Optical Resolution:
Roll:
Pitch Angle:
Skew Tolerance:
Aiming Element:
Illumination Element Field of View:
WVGA 752 H x 480 V pixels (gray scale) 360 60 from normal 60 from normal 655 nm 10 nm Visible Laser Diode 25 nm 5 nm Red LEDs Horizontal: 39.6; Vertical: 25.7 225 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Specifications Item Nominal Working Distance from exit window:
Description Density:-------------5 mil -----------7.5 mil--------- 20 mil--------- --13 mil 1D Code Type:----39-------------- 39---------------39------------- ---UPC Near:-----------------2 inches- ------------------------------------ ------ 1.5 inches Far: -- -- -- -- -- - - 7.4 inches- --10.5 inches-- -24.6 inches - - 15.4 inches Ambient Light Immunity:
Motion Tolerance:
Supported Symbologies Density:---------- --6.67 mil----- -- 10 mil------ ---- 15 mil 2D Code Type:----PDF417------- PDF417 --- - - PDF417 Near:-- - -- --- - ---3.3 inches Far:- -- - -- - - - ---7.0 inches---- -10 inches1---- 4.6 inches From total darkness Indoor: 450 ft. candles (4,845 lux). Outdoor: 9,000 ft. candles (96,900 lux). 63.5 cm (25 inches) per second, typical. 1D enabled by default:
Codabar, Code 39, Code 128, EAN-13, EAN-8, Interleaved 2 of 5, UPC-A and UPC-E. 1D disabled by default:
Code 11, Code 32 Pharmaceutical (PARAF), Code 93, MSI, Reduced Space Symbology (RSS-14, RSS Limited, RSS Expanded), Straight 2 of 5 IATA
(two-bar start/stop), Straight 2 of 5 Industrial (three-bar start/stop), Trioptic, UPC-E1. 2D enabled by default:
4-CB (4-State Customer Bar code), Aztec, MicroPDF417, PDF417, MaxiCode. 2D disabled by default:
Australian Post, British Post (4 state code and infomail), Data Matrix, Japanese Post, KIX (Netherlands) Post, Planet Code, Postnet, QR Code, EANUCC Composite, TCIF Linked Code 39 (TLC39). Supported Aiming Modes: Class 2 Laser, cross hair with bright center for sunlight visibility; Pick List mode option. Cordless:
Bluetooth: Class II, v 2.1 with Adaptive Frequency Hopping (AFH). Supported profiles: Serial Port Profile (SPP), Human Interface Device Profile
(HID), Service Discovery Application Profile (SDAP). Pairing: by reading terminal Bluetooth address as bar code off the display or from a printed label. Interface:
Corded (to WT4090): Serial. 226 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Specifications Item Description Field Replaceable Parts:
Batteries, corded adaptor, trigger clamp, triggerless clamp, comfort pad, straps and strap buckle. User Interface LED:
Beeper:
Restore Key:
Scan Triggering:
User Environment Operating Temperature:
Storage Temperature:
Humidity:
Drop Specification:
Sealing:
Electrostatic Discharge
(ESD):
Power Cordless:
Two (parallel), multi color, rear left and rear right. Rear center, up to 80 dBA SPL @ 10 cm. User accessible for emergency boot up and Bluetooth reconnect (after excessive disconnection period). Manual or automatic using Interactive Sensing Technology (IST).
-20 to 55 C/-4 to 131 F.
-40 to 70 C/-40 to 158 F excl. Battery
-40 to 60 C/-40 to 140 F incl. Battery 5% to 85% (non-condensing). 6 ft./1.8 m multiple drops to concrete across operating temperature range. IP54 15kV air discharge, 8kV direct discharge. Standard battery: Li-Ion 970 mAh, 3.7 V with up to 35,000 scans (continuous) or up to 10 hours with 900 scans per hour on a single charge using fresh batteries. Extended battery: Li-Ion 1940 mAh, 3.7 V with up to 70,000 scans (continuous) or up to 20 hours with 900 scans per hour on a single charge using fresh batteries. Corded:
Software Compatibility Corded adaptor to WT4090 Peripherals and Accessories Battery charger:
Regulatory Electrical Safety:
Laser Safety:
Zebra Services Platform (MSP); DataWedge; Wavelinks Terminal Emulation
(TE), among others. Charger accommodates eight standard and extended batteries simultaneously each with LED indicator and battery age test. Certified to UL60950-1, CSA C22.2 No. 60950-1, EN60950-1, IEC 60950-1. CDRH Class II, IEC 60825-1 Class 2. 227 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Specifications Description FCC Part 15 Class B, ICES-003 Class B, European Union EMC and R&TT. Directives, Australian AS/NZS 60950.1. Compliance with RoHS standards. Item EMI/RFI:
RoHS:
Charger Table 16 Imager Technical Specifications Item Physical Characteristics Dimensions (H x W x L):
Description 10.2 x 11.4 x 26.6 cm (4.02 x 4.49 x 10.50 in.) without cord and external power supply. Performance Characteristics Charging Duration:
User Interface LED:
Age Test Key User Environment Operating Temperature:
Storage Temperature:
Humidity:
Electrostatic Discharge
(ESD):
Power External Power Supply:
Peripherals and Accessories RS507 Batteries:
Regulatory Electrical Safety:
EMI/RFI:
RoHS:
Less than 4 hours (for both standard and extended capacity batteries). One Bi color LED per charging bay. Activate age test cycle for docked batteries. 0 to 50 C/32 to 122 F (charging is performed until battery temperature is 45 C/113 F/
-40 to 85 C/-40 to 158 F 5% to 85% (non-condensing) 15kV air discharge, 8kV direct discharge. AC Input: 90-264 V AC 50-60 Hz with IEC320 C8 AC inlet DC Output: 12 V/4.17A Charges and tests both standard and extended capacity RS507 batteries. Certified to UL60950-1, CSA C22.2 No. 60950-1, EN60950-1, IEC 60950-1 FCC Part 15 Class B, ICES-003 Class B Compliance with RoHS standards. 228 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Standard Default Parameters Standard Default Parameters Table Table 17 Standard Default Parameters Table Parameter Parameter Number Default User Preferences Set Default Parameter Parameter Bar Code Scanning Beep After Good Decode Beeper Tone Beeper Volume Picklist Mode Set Defaults Enabled Enabled Medium High ECh 38h 91h 8Ch F0h 92h Disabled Fuzzy 1D Processing F1h 02h Enabled Decoding Illumination F0h, 2Ah Enabled UPC/EAN UPC-A UPC-E UPC-E1 Enabled Enabled Disabled 01h 02h 0Ch 229 Page Number
<Blue><Ita lic>9-72
<Blue><Ita lic>9-73
<Blue><Ita lic>9-74
<Blue><Ita lic>9-75
<Blue><Ita lic>9-76
<Blue><Ita lic>9-78
<Blue><Ita lic>9-79
<Blue><Ita lic>9-80
<Blue><Ita lic>10-99
<Blue><Ita lic>10-99
<Blue><Ita lic>10-99 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Standard Default Parameters Table 17 Standard Default Parameters Table (Continued) Parameter Parameter Number Default EAN-8/JAN 8 EAN-13/JAN 13 Bookland EAN Decode UPC/EAN/JAN Supplementals
(2 and 5 digits) User-Programmable Supplementals Supplemental 1:
Supplemental 2:
UPC/EAN/JAN Supplemental Redundancy 04h 03h 53h 10h Enabled Enabled Disabled Ignore F1h 43h F1h 44h 50h 10 Decode UPC/EAN/JAN Supplemental AIM ID F1h A0h Combined Transmit UPC-A Check Digit Transmit UPC-E Check Digit Transmit UPC-E1 Check Digit UPC-A Preamble UPC-E Preamble UPC-E1 Preamble Convert UPC-E to A Convert UPC-E1 to A EAN-8/JAN-8 Extend 28h 29h 2Ah 22h 23h 24h 25h 26h 27h Enabled Enabled Enabled System Character System Character System Character Disabled Disabled Disabled Bookland ISBN Format F1h 40h ISBN-10 UCC Coupon Extended Code 55h Enabled ISSN EAN F1h 69h Disabled 230 Page Number
<Blue><Ita lic>10-100
<Blue><Ita lic>10-101
<Blue><Ita lic>10-101
<Blue><Ita lic>10-102
<Blue><Ita lic>10-105
<Blue><Ita lic>10-105
<Blue><Ita lic>10-106
<Blue><Ita lic>10-106
<Blue><Ita lic>10-107
<Blue><Ita lic>10-107
<Blue><Ita lic>10-107
<Blue><Ita lic>10-108
<Blue><Ita lic>10-109
<Blue><Ita lic>10-110
<Blue><Ita lic>10-111
<Blue><Ita lic>10-114
<Blue><Ita lic>10-113
<Blue><Ita lic>10-114
<Blue><Ita lic>10-114 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Standard Default Parameters Table 17 Standard Default Parameters Table (Continued) Parameter Parameter Number Default Code 128 Code 128 08h Enabled Set Length(s) for Code 128 D1h D2h Any Length GS1-128 ISBT 128 ISBT Concatenation Check ISBT Table 0Eh 54h Enabled Enabled F1h 41h Disabled F1h 42h Enabled ISBT Concatenation Redundancy DFh 10 Code 39 Code 39 Trioptic Code 39 Convert Code 39 to Code 32
(Italian Pharmacy Code) Code 32 Prefix 00h 0Dh 56h E7h Enabled Disabled Disabled Disabled Set Length(s) for Code 39 12h 13h 2 to 55 Code 39 Check Digit Verification Transmit Code 39 Check Digit Code 39 Full ASCII Conversion Buffer Code 39 Code 93 Code 93 Disabled Disabled Disabled Disabled Disabled 30h 2Bh 11h 71h 09h 231 Page Number
<Blue><Ita lic>10-115
<Blue><Ita lic>10-115
<Blue><Ita lic>10-116
<Blue><Ita lic>10-117
<Blue><Ita lic>10-118
<Blue><Ita lic>10-119
<Blue><Ita lic>10-119
<Blue><Ita lic>10-120
<Blue><Ita lic>10-120
<Blue><Ita lic>10-121
<Blue><Ita lic>10-121
<Blue><Ita lic>10-122
<Blue><Ita lic>10-123
<Blue><Ita lic>10-123
<Blue><Ita lic>10-124
<Blue><Ita lic>10-124
<Blue><Ita lic>10-127 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Standard Default Parameters Table 17 Standard Default Parameters Table (Continued) Parameter Parameter Number Default Set Length(s) for Code 93 1Ah 1Bh 4 to 55 Code 11 Code 11 0Ah Disabled Set Lengths for Code 11 1Ch 1Dh 4 to 55 Code 11 Check Digit Verification Transmit Code 11 Check Digit(s) Interleaved 2 of 5 (ITF) Interleaved 2 of 5 (ITF) 34h 2Fh 06h Disabled Disabled Disabled Set Lengths for I 2 of 5 16h 17h 14 I 2 of 5 Check Digit Verification Transmit I 2 of 5 Check Digit Convert I 2 of 5 to EAN 13 Discrete 2 of 5 (DTF) Discrete 2 of 5 31h 2Ch 52h 05h Disabled Disabled Disabled Disabled Set Length(s) for D 2 of 5 14h 15h 12 Codabar (NW - 7) Codabar 07h Disabled Set Lengths for Codabar 18h 19h 5 to 55 CLSI Editing NOTIS Editing Disabled Disabled 36h 37h 232 Page Number
<Blue><Ita lic>10-127
<Blue><Ita lic>10-129
<Blue><Ita lic>10-129
<Blue><Ita lic>10-130
<Blue><Ita lic>10-132
<Blue><Ita lic>10-132
<Blue><Ita lic>10-133
<Blue><Ita lic>10-135
<Blue><Ita lic>10-135
<Blue><Ita lic>10-136
<Blue><Ita lic>10-136
<Blue><Ita lic>10-137
<Blue><Ita lic>10-139
<Blue><Ita lic>10-139
<Blue><Ita lic>10-140
<Blue><Ita lic>10-141 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Standard Default Parameters Table 17 Standard Default Parameters Table (Continued) Parameter Parameter Number Default MSI MSI 0Bh Disabled Set Length(s) for MSI 1Eh 1Fh 4 to 55 MSI Check Digits Transmit MSI Check Digit MSI Check Digit Algorithm Chinese 2 of 5 Chinese 2 of 5 Matrix 2 of 5 Matrix 2 of 5 Matrix 2 of 5 Lengths Matrix 2 of 5 Redundancy 32h 2Eh 33h One Disabled Mod 10/Mod 10 F0h 98h Disabled F1h 6Ah Disable F1h 6Bh F1h 6Ch F1h 6Dh 1 Length - 14 Disabled Matrix 2 of 5 Check Digit F1h 6Eh Disabled Transmit Matrix 2 of 5 Check Digit F1h 6Fh Disabled Inverse 1D Postal Codes US Postnet US Planet Transmit US Postal Check Digit UK Postal Transmit UK Postal Check Digit F1h 4Ah Regular Disabled Disabled Enabled Disabled Enabled 59h 5Ah 5Fh 5Bh 60h 233 Page Number
<Blue><Ita lic>10-142
<Blue><Ita lic>10-142
<Blue><Ita lic>10-143
<Blue><Ita lic>10-144
<Blue><Ita lic>10-145
<Blue><Ita lic>10-145
<Blue><Ita lic>10-146
<Blue><Ita lic>10-147
<Blue><Ita lic>10-148
<Blue><Ita lic>10-149
<Blue><Ita lic>10-149
<Blue><Ita lic>10-149
<Blue><Ita lic>10-150
<Blue><Ita lic>10-151
<Blue><Ita lic>10-151
<Blue><Ita lic>10-152
<Blue><Ita lic>10-152 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Standard Default Parameters Table 17 Standard Default Parameters Table (Continued) Parameter Japan Postal Australian Postal Default Parameter Number F0h 22h Disabled F0h 23h Disabled Netherlands KIX Code F0h 46h Disabled USPS 4CB/One Code/Intelligent Mail F1h 50h Disabled UPU FICS Postal GS1 DataBar GS1 DataBar-14 F1h 63h Disabled F0h 52h Disabled GS1 DataBar Limited F0h 53h Disabled GS1 DataBar Expanded F0h 54h Disabled Convert GS1 DataBar to UPC/EAN F0h 8Dh Disabled Composite Composite CC-C Composite CC-A/B Composite TLC-39 F0h 55h Disabled F0h 56h Disabled F0h 73h Disabled UPC Composite Mode F0h 58h Never Linked Composite Beep Mode GS1-128 Emulation Mode for UCC/EAN Composite Codes 2D Symbologies PDF417 MicroPDF417 Code 128 Emulation F0h 8Eh Beep As Each Code Type is Decoded F0h ABh Disabled Enabled Disabled Disabled 0Fh E3h 7Bh 234 Page Number
<Blue><Ita lic>10-153
<Blue><Ita lic>10-154
<Blue><Ita lic>10-154
<Blue><Ita lic>10-155
<Blue><Ita lic>10-155
<Blue><Ita lic>10-156
<Blue><Ita lic>10-156
<Blue><Ita lic>10-157
<Blue><Ita lic>10-157
<Blue><Ita lic>10-158
<Blue><Ita lic>10-158
<Blue><Ita lic>10-159
<Blue><Ita lic>10-159
<Blue><Ita lic>10-160
<Blue><Ita lic>10-160
<Blue><Ita lic>10-161
<Blue><Ita lic>10-161
<Blue><Ita lic>10-161 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Standard Default Parameters Table 17 Standard Default Parameters Table (Continued) Parameter Data Matrix Parameter Number F0h 24h Enabled Default Data Matrix Inverse F1h 4Ch Regular Maxicode QR Code QR Inverse MicroQR Aztec Aztec Inverse F0h 26h Disabled F0h 25h Enabled F1h 4Bh Regular F1h 3Dh Enabled F1h 3Eh Enabled F1h 4Dh Regular Symbology-Specific Security Levels Redundancy Level Security Level 4Eh 4Dh 1 0 Intercharacter Gap Size F0h 7Dh Normal Report Version Macro PDF Flush Macro PDF Buffer Abort Macro PDF Entry Page Number
<Blue><Ita lic>10-163
<Blue><Ita lic>10-163
<Blue><Ita lic>10-164
<Blue><Ita lic>10-164
<Blue><Ita lic>10-165
<Blue><Ita lic>10-165
<Blue><Ita lic>10-166
<Blue><Ita lic>10-166
<Blue><Ita lic>10-167
<Blue><Ita lic>10-168
<Blue><Ita lic>10-169
<Blue><Ita lic>10-170
<Blue><Ita lic>10-171
<Blue><Ita lic>10-171 235 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Programming Reference Symbol Code Identifiers Table 18 Symbol Code Characters Code Character Code Type A B C D E F G H J K L M N R T X z P00 P01 P02 P03 UPC-A, UPC-E, UPC-E1, EAN-8, EAN-13 Code 39, Code 32 Codabar Code 128 Code 93 Interleaved 2 of 5 Discrete 2 of 5, or Discrete 2 of 5 IATA Code 11 MSI GS1-128 Bookland EAN Trioptic Code 39 Coupon Code GS1 DataBar Family UCC Composite, TLC 39 PDF417, Macro PDF417, Micro PDF417 Aztec, Aztec Rune Data Matrix QR Code, MicroQR Maxicode US Postnet 236 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Programming Reference Table 18 Symbol Code Characters (Continued) Code Character Code Type P04 P05 P06 P08 P09 P0A P0B US Planet Japan Postal UK Postal Netherlands KIX Code Australian Postal USPS 4CB/One Code/Intelligent Mail UPU FICS Postal AIM Code Identifiers Each AIM Code Identifier contains the three-character string ]cm where:
= Flag Character (ASCII 93)
]
c = Code Character (see Table 19) m = Modifier Character (see Table 20) Table 19 Aim Code Characters Code Character A C d E e F G H I L M Q S U Code Type Code 39, Code 39 Full ASCII, Code 32 Code 128, Coupon (Code 128 portion) Data Matrix UPC/EAN, Coupon (UPC portion) GS1 DataBar Family Codabar Code 93 Code 11 Interleaved 2 of 5 PDF417, Macro PDF417, Micro PDF417 MSI QR Code, MicroQR Discrete 2 of 5, IATA 2 of 5 Maxicode 237 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Programming Reference Table 19 Aim Code Characters (Continued) Code Character Code Type z X Aztec, Aztec Rune Bookland EAN, Trioptic Code 39, US Postnet, US Planet, UK Postal, Japan Postal, Australian Postal, Netherlands KIX Code, USPS 4CB/One Code/Intelligent Mail, UPU FICS Postal The modifier character is the sum of the applicable option values based on Table 20. Table 20 Modifier Characters Code Type Option Value Option Code 39 0 1 3 4 5 7 No check character or Full ASCII processing. Reader has checked one check character. Reader has checked and stripped check character. Reader has performed Full ASCII character conversion. Reader has performed Full ASCII character conversion and checked one check character. Reader has performed Full ASCII character conversion and checked and stripped check character. Trioptic Code 39 Code 128 I 2 of 5 Codabar Code 93 Example: A Full ASCII bar code with check character W, A+I+MI+DW, is transmitted as
]A7AIMID where 7 = (3+4). 0 Example: A Trioptic bar code 412356 is transmitted as ]X0412356 0 Standard data packet, no Function code 1 in first symbol position. No option specified at this time. Always transmit 0. 1 Function code 1 in first symbol character position. Function code 1 in second symbol character position. 2 Example: A Code (EAN) 128 bar code with Function 1 character FNC1 in the first position, AIMID is transmitted as ]C1AIMID 0 No check digit processing. 1 Reader has validated check digit. Reader has validated and stripped check digit. 3 Example: An I 2 of 5 bar code without check digit, 4123, is transmitted as ]I04123 0 No check digit processing. 1 Reader has checked check digit. Reader has stripped check digit before transmission. 3 Example: A Codabar bar code without check digit, 4123, is transmitted as ]F04123 0 Example: A Code 93 bar code 012345678905 is transmitted as ]G0012345678905 No options specified at this time. Always transmit 0. 238 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Programming Reference Table 20 Modifier Characters (Continued) Code Type Option Value Option MSI D 2 of 5 UPC/EAN Bookland EAN Code 11 GS1 DataBar Family 0 1 Check digits are sent. No check digit is sent. Example: An MSI bar code 4123, with a single check digit checked, is transmitted as
]M14123 0 Example: A D 2 of 5 bar code 4123, is transmitted as ]S04123 0 No options specified at this time. Always transmit 0. Standard data packet in full EAN format, i.e. 13 digits for UPC-A, UPC-E, and EAN-13 (not including supplemental data). 1 2 3 Two digit supplemental data only. Five digit supplemental data only. Combined data packet comprising 13 digits from EAN-13, UPC-A or UPC-E symbol and 2 or 5 digits from supplemental symbol. EAN-8 data packet. 4 Example: A UPC-A bar code 012345678905 is transmitted as ]E00012345678905 0 Example: A Bookland EAN bar code 123456789X is transmitted as ]X0123456789X 0 No options specified at this time. Always transmit 0. Single check digit 1 3 Two check digits Check characters validated but not transmitted. No option specified at this time. Always transmit 0. GS1 DataBar-14 and GS1 DataBar Limited transmit with an Application Identifier 01. Note: In GS1-128 emulation mode, GS1 DataBar is transmitted using Code 128 rules (i.e., ]C1). Example: A GS1 DataBar-14 bar code 100123456788902 is transmitted as
]e001100123456788902. 239 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Programming Reference Table 20 Modifier Characters (Continued) Code Type Option Value Option EAN.UCC Composites
(GS1 DataBar, GS1-128, 2D portion of UPC composite) PDF417, Micro PDF417 0 1 2 3 1 0 1 2 3 4 5 Native mode transmission. Note: UPC portion of composite is transmitted using UPC rules. Standard data packet. Data packet containing the data following an encoded symbol separator character. Data packet containing the data following an escape mechanism character. The data packet does not support the ECI protocol. Data packet containing the data following an escape mechanism character. The data packet supports the ECI protocol. GS1-128 emulation Note: UPC portion of composite is transmitted using UPC rules. Data packet is a GS1-128 symbol (i.e., data is preceded with ]JC1). Reader set to conform to protocol defined in 1994 PDF417 symbology specifications. Note: When this option is transmitted, the receiver cannot reliably determine whether ECIs have been invoked or whether data byte 92DEC has been doubled in transmission. Reader set to follow the ECI protocol (Extended Channel Interpretation). All data characters 92DEC are doubled. Reader set for Basic Channel operation (no escape character transmission protocol). Data characters 92DEC are not doubled. Note: When decoders are set to this mode, unbuffered Macro symbols and symbols requiring the decoder to convey ECI escape sequences cannot be transmitted. The bar code contains a GS1-128 symbol, and the first codeword is 903-907, 912, 914, 915. The bar code contains a GS1-128 symbol, and the first codeword is in the range 908-909. The bar code contains a GS1-128 symbol, and the first codeword is in the range 910-911. Example: A PDF417 bar code ABCD, with no transmission protocol enabled, is transmitted as ]L2ABCD. Data Matrix 0 1 2 3 4 5 6 ECC 000-140, not supported. ECC 200. ECC 200, FNC1 in first or fifth position. ECC 200, FNC1 in second or sixth position. ECC 200, ECI protocol implemented. ECC 200, FNC1 in first or fifth position, ECI protocol implemented. ECC 200, FNC1 in second or sixth position, ECI protocol implemented. 240 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Programming Reference Table 20 Modifier Characters (Continued) Code Type Option Value Option MaxiCode QR Code Aztec 0 1 2 3 0 1 2 3 4 5 6 0 C Symbol in Mode 4 or 5. Symbol in Mode 2 or 3. Symbol in Mode 4 or 5, ECI protocol implemented. Symbol in Mode 2 or 3, ECI protocol implemented in secondary message. Model 1 symbol. Model 2 / MicroQR symbol, ECI protocol not implemented. Model 2 symbol, ECI protocol implemented. Model 2 symbol, ECI protocol not implemented, FNC1 implied in first position. Model 2 symbol, ECI protocol implemented, FNC1 implied in first position. Model 2 symbol, ECI protocol not implemented, FNC1 implied in second position. Model 2 symbol, ECI protocol implemented, FNC1 implied in second position. Aztec symbol. Aztec Rune symbol. 241 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Sample Bar Codes Code 39 UPC/EAN UPC-A, 100%
123ABC 0 12345 67890 5 242 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Sample Bar Codes EAN-13, 100%
3 4 5 6 7 8 9 0 1 2 3 4 0 Code 128 Interleaved 2 of 5 12345678901234567890123456789012345678901234 12345678901231 GS1 DataBar-14 NOTE: DataBar-14 must be enabled to read the bar code below. 7612341562341 243 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY PDF417 Data Matrix Maxicode Sample Bar Codes 244 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY QR Code US Postnet UK Postal Sample Bar Codes 245 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Numeric Bar Codes Numeric Bar Codes For parameters requiring specific numeric values, scan the appropriately numbered bar code(s). 0 2 4 1 3 246 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Numeric Bar Codes Numeric Bar Codes (continued) 6 8 5 7 9 Cancel To correct an error or change a selection, scan the bar code below. Cancel 247 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Glossary A B Aperture. The opening in an optical system defined by a lens or baffle that establishes the field of view. API. An interface by means of which one software component communicates with or controls another. Usually used to refer to services provided by one software component to another, usually via software interrupts or function calls Application Programming Interface. See API. ASCII. American Standard Code for Information Interchange. A 7 bit-plus-parity code representing 128 letters, numerals, punctuation marks and control characters. It is a standard data transmission code in the U.S. Autodiscrimination. The ability of an interface controller to determine the code type of a scanned bar code. After this determination is made, the information content is decoded. Bar. The dark element in a printed bar code symbol. Bar Code. A pattern of variable-width bars and spaces which represents numeric or alphanumeric data in machine-readable form. The general format of a bar code symbol consists of a leading margin, start character, data or message character, check character (if any), stop character, and trailing margin. Within this framework, each recognizable symbology uses its own unique format. See Symbology. Bar Code Density. The number of characters represented per unit of measurement (e.g., characters per inch). Bar Height. The dimension of a bar measured perpendicular to the bar width. Bar Width. Thickness of a bar measured from the edge closest to the symbol start character to the trailing edge of the same bar. BIOS. Basic Input Output System. A collection of ROM-based code with a standard API used to interface with standard PC hardware. Bit. Binary digit. One bit is the basic unit of binary information. Generally, eight consecutive bits compose one byte of data. The pattern of 0 and 1 values within the byte determines its meaning. 248 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Glossary Bits per Second (bps). Bits transmitted or received. Boot or Boot-up. The process a computer goes through when it starts. During boot-up, the computer can run self-diagnostic tests and configure hardware and software. BOOTP. A protocol for remote booting of diskless devices. Assigns an IP address to a machine and may specify a boot file. The client sends a bootp request as a broadcast to the bootp server port (67) and the bootp server responds using the bootp client port (68). The bootp server must have a table of all devices, associated MAC addresses and IP addresses. bps. See Bits Per Second. Byte. On an addressable boundary, eight adjacent binary digits (0 and 1) combined in a pattern to represent a specific character or numeric value. Bits are numbered from the right, 0 through 7, with bit 0 the low-order bit. One byte in memory is used to store one ASCII character. C CDRH. Center for Devices and Radiological Health. A federal agency responsible for regulating laser product safety. This agency specifies various laser operation classes based on power output during operation. CDRH Class 1. This is the lowest power CDRH laser classification. This class is considered intrinsically safe, even if all laser output were directed into the eye's pupil. There are no special operating procedures for this class. CDRH Class 2. No additional software mechanisms are needed to conform to this limit. Laser operation in this class poses no danger for unintentional direct human exposure. Character. A pattern of bars and spaces which either directly represents data or indicates a control function, such as a number, letter, punctuation mark, or communications control contained in a message. Character Set. Those characters available for encoding in a particular bar code symbology. Check Digit. A digit used to verify a correct symbol decode. The scanner inserts the decoded data into an arithmetic formula and checks that the resulting number matches the encoded check digit. Check digits are required for UPC but are optional for other symbologies. Using check digits decreases the chance of substitution errors when a symbol is decoded. Codabar. A discrete self-checking code with a character set consisting of digits 0 to 9 and six additional characters:
( - $ : / , +). Code 128. A high density symbology which allows the controller to encode all 128 ASCII characters without adding extra symbol elements. Code 3 of 9 (Code 39). A versatile and widely used alphanumeric bar code symbology with a set of 43 character types, including all uppercase letters, numerals from 0 to 9 and 7 special characters (- . / + % $ and space). The code name is derived from the fact that 3 of 9 elements representing a character are wide, while the remaining 6 are narrow. Code 93. An industrial symbology compatible with Code 39 but offering a full character ASCII set and a higher coding density than Code 39. 249 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Glossary Code Length. Number of data characters in a bar code between the start and stop characters, not including those characters. Cold Boot. A cold boot restarts the mobile computer and erases all user stored records and entries. COM port. Communication port; ports are identified by number, e.g., COM1, COM2. Continuous Code. A bar code or symbol in which all spaces within the symbol are parts of characters. There are no intercharacter gaps in a continuous code. The absence of gaps allows for greater information density. Cradle. A cradle is used for charging the terminal battery and for communicating with a host computer, and provides a storage place for the terminal when not in use. D E Dead Zone. An area within a scanner's field of view, in which specular reflection may prevent a successful decode. Decode. To recognize a bar code symbology (e.g., UPC/EAN) and then analyze the content of the specific bar code scanned. Decode Algorithm. A decoding scheme that converts pulse widths into data representation of the letters or numbers encoded within a bar code symbol. Decryption. Decryption is the decoding and unscrambling of received encrypted data. Also see, Encryption and Key. Depth of Field. The range between minimum and maximum distances at which a scanner can read a symbol with a certain minimum element width. Discrete 2 of 5. A binary bar code symbology representing each character by a group of five bars, two of which are wide. The location of wide bars in the group determines which character is encoded; spaces are insignificant. Only numeric characters (0 to 9) and START/STOP characters may be encoded. Discrete Code. A bar code or symbol in which the spaces between characters (intercharacter gaps) are not part of the code. DRAM. Dynamic random access memory. EAN. European Article Number. This European/International version of the UPC provides its own coding format and symbology standards. Element dimensions are specified metrically. EAN is used primarily in retail. Element. Generic term for a bar or space. Encoded Area. Total linear dimension occupied by all characters of a code pattern, including start/stop characters and data. ENQ (RS-232). ENQ software handshaking is also supported for the data sent to the host. 250 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Glossary ESD. Electro-Static Discharge F H I Flash Disk. An additional megabyte of non-volatile memory for storing application and configuration files. Flash Memory. Flash memory is responsible for storing the system firmware and is non-volatile. If the system power is interrupted the data is not be lost. FTP. See File Transfer Protocol. Hard Reset. See Cold Boot. Host Computer. A computer that serves other terminals in a network, providing such services as computation, database access, supervisory programs and network control. Hz. Hertz; A unit of frequency equal to one cycle per second. IDE. Intelligent drive electronics. Refers to the solid-state hard drive type. IEC. International Electrotechnical Commission. This international agency regulates laser safety by specifying various laser operation classes based on power output during operation. IEC (825) Class 1. This is the lowest power IEC laser classification. Conformity is ensured through a software restriction of 120 seconds of laser operation within any 1000 second window and an automatic laser shutdown if the scanner's oscillating mirror fails. IEEE Address. See MAC Address. Input/Output Ports. I/O ports are primarily dedicated to passing information into or out of the terminals memory. Series 9000 mobile computers include Serial and USB ports. Intercharacter Gap. The space between two adjacent bar code characters in a discrete code. Interleaved 2 of 5. A binary bar code symbology representing character pairs in groups of five bars and five interleaved spaces. Interleaving provides for greater information density. The location of wide elements
(bar/spaces) within each group determines which characters are encoded. This continuous code type uses no intercharacter spaces. Only numeric (0 to 9) and START/STOP characters may be encoded. Interleaved Bar Code. A bar code in which characters are paired together, using bars to represent the first character and the intervening spaces to represent the second. 251 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Glossary Interleaved 2 of 5. A binary bar code symbology representing character pairs in groups of five bars and five interleaved spaces. Interleaving provides for greater information density. The location of wide elements
(bar/spaces) within each group determines which characters are encoded. This continuous code type uses no intercharacter spaces. Only numeric (0 to 9) and START/STOP characters may be encoded. I/O Ports. interface The connection between two devices, defined by common physical characteristics, signal characteristics, and signal meanings. Types of interfaces include RS-232 and PCMCIA. IOCTL. Input/Output Control. IP Address. (Internet Protocol address) The address of a computer attached to an IP network. Every client and server station must have a unique IP address. A 32-bit address used by a computer on a IP network. Client workstations have either a permanent address or one that is dynamically assigned to them each session. IP addresses are written as four sets of numbers separated by periods; for example, 204.171.64.2. IPX/SPX. Internet Package Exchange/Sequential Packet Exchange. A communications protocol for Novell. IPX is Novells Layer 3 protocol, similar to XNS and IP, and used in NetWare networks. SPX is Novell's version of the Xerox SPP protocol. IS-95. Interim Standard 95. The EIA/TIA standard that governs the operation of CDMA cellular service. Versions include IS-95A and IS-95B. See CDMA. Key. A key is the specific code used by the algorithm to encrypt or decrypt the data. Also see, Encryption and Decrypting. LASER. Light Amplification by Stimulated Emission of Radiation.The laser is an intense light source. Light from a laser is all the same frequency, unlike the output of an incandescent bulb. Laser light is typically coherent and has a high energy density. Laser Diode. A gallium-arsenide semiconductor type of laser connected to a power source to generate a laser beam. This laser type is a compact source of coherent light. Laser Scanner. A type of bar code reader that uses a beam of laser light. LCD. See Liquid Crystal Display. LED Indicator. A semiconductor diode (LED - Light Emitting Diode) used as an indicator, often in digital displays. The semiconductor uses applied voltage to produce light of a certain frequency determined by the semiconductor's particular chemical composition. Light Emitting Diode. See LED. Liquid Crystal Display (LCD). A display that uses liquid crystal sealed between two glass plates. The crystals are excited by precise electrical charges, causing them to reflect light outside according to their bias. They use little electricity and react relatively quickly. They require external light to reflect their information to the user. 252 K L 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Glossary M N O P MIL. 1 mil = 1 thousandth of an inch. Misread (Misdecode). A condition which occurs when the data output of a reader or interface controller does not agree with the data encoded within a bar code symbol. Nominal. The exact (or ideal) intended value for a specified parameter. Tolerances are specified as positive and negative deviations from this value. Nominal Size. Standard size for a bar code symbol. Most UPC/EAN codes are used over a range of magnifications
(e.g., from 0.80 to 2.00 of nominal). NVM. Non-Volatile Memory. ODI. See Open Data-Link Interface. Open Data-Link Interface (ODI). Novells driver specification for an interface between network hardware and higher-level protocols. It supports multiple protocols on a single NIC (Network Interface Controller). It is capable of understanding and translating any network information or request sent by any other ODI-compatible protocol into something a NetWare client can understand and process. Open System Authentication. Open System authentication is a null authentication algorithm. PAN . Personal area network. Using Bluetooth wireless technology, PANs enable devices to communicate wirelessly. Generally, a wireless PAN consists of a dynamic group of less than 255 devices that communicate within about a 33-foot range. Only devices within this limited area typically participate in the network. Parameter. A variable that can have different values assigned to it. PC Card. A plug-in expansion card for laptop computers and other devices, also called a PCMCIA card. PC Cards are 85.6mm long x 54 mm wide, and have a 68 pin connector. There are several different kinds:
Type I; 3.3 mm high; use - RAM or Flash RAM Type II; 5 mm high; use - modems, LAN adaptors Type III; 10.5 high; use - Hard Disks PCMCIA. Personal Computer Memory Card Interface Association. See PC Card. 253 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Glossary Percent Decode. The average probability that a single scan of a bar code would result in a successful decode. In a well-designed bar code scanning system, that probability should approach near 100%. PING. (Packet Internet Groper) An Internet utility used to determine whether a particular IP address is online. It is used to test and debug a network by sending out a packet and waiting for a response. Print Contrast Signal (PCS). Measurement of the contrast (brightness difference) between the bars and spaces of a symbol. A minimum PCS value is needed for a bar code symbol to be scannable. PCS = (RL - RD) / RL, where RL is the reflectance factor of the background and RD the reflectance factor of the dark bars. Programming Mode. The state in which a scanner is configured for parameter values. See Scanning Mode. Q R Quiet Zone. A clear space, containing no dark marks, which precedes the start character of a bar code symbol and follows the stop character. QWERTY. A standard keyboard commonly used on North American and some European PC keyboards. QWERTY refers to the arrangement of keys on the left side of the third row of keys. RAM. Random Access Memory. Data in RAM can be accessed in random order, and quickly written and read. Reflectance. Amount of light returned from an illuminated surface. Resolution. The narrowest element dimension which is distinguished by a particular reading device or printed with a particular device or method. RF. Radio Frequency. ROM. Read-Only Memory. Data stored in ROM cannot be changed or removed. Router. A device that connects networks and supports the required protocols for packet filtering. Routers are typically used to extend the range of cabling and to organize the topology of a network into subnets. See Subnet. RS-232. An Electronic Industries Association (EIA) standard that defines the connector, connector pins, and signals used to transfer data serially from one device to another. 254 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Glossary S Scan Area. Area intended to contain a symbol. Scanner. An electronic device used to scan bar code symbols and produce a digitized pattern that corresponds to the bars and spaces of the symbol. Its three main components are: 1) Light source (laser or photoelectric cell)
- illuminates a bar code,; 2) Photodetector - registers the difference in reflected light (more light reflected from spaces); 3) Signal conditioning circuit - transforms optical detector output into a digitized bar pattern. Scanning Mode. The scanner is energized, programmed and ready to read a bar code. Scanning Sequence. A method of programming or configuring parameters for a bar code reading system by scanning bar code menus. SDK. Software Development Kit Self-Checking Code. A symbology that uses a checking algorithm to detect encoding errors within the characters of a bar code symbol. Shared Key. Shared Key authentication is an algorithm where both the AP and the MU share an authentication key. SHIP. Symbol Host Interface Program. SID. System Identification code. An identifier issued by the FCC for each market. It is also broadcast by the cellular carriers to allow cellular devices to distinguish between the home and roaming service. Soft Reset. See Warm Boot. Space. The lighter element of a bar code formed by the background between bars. Specular Reflection. The mirror-like direct reflection of light from a surface, which can cause difficulty decoding a bar code. Standard Trigger Mode. The Imager uses this mode when lifted off the counter or removed from the wall mount. In this mode, aim the Imager at a bar code and pull the trigger to decode. Start/Stop Character. A pattern of bars and spaces that provides the scanner with start and stop reading instructions and scanning direction. The start and stop characters are normally to the left and right margins of a horizontal code. STEP. Symbol Terminal Enabler Program. Subnet. A subset of nodes on a network that are serviced by the same router. See Router. Subnet Mask. A 32-bit number used to separate the network and host sections of an IP address. A custom subnet mask subdivides an IP network into smaller subsections. The mask is a binary pattern that is matched up with the IP address to turn part of the host ID address field into a field for subnets. Default is often 255.255.255.0. Substrate. A foundation material on which a substance or image is placed. SVTP. Symbol Virtual Terminal Program. Symbol. A scannable unit that encodes data within the conventions of a certain symbology, usually including start/stop characters, quiet zones, data characters and check characters. 255 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Glossary Symbol Aspect Ratio. The ratio of symbol height to symbol width. Symbol Height. The distance between the outside edges of the quiet zones of the first row and the last row. Symbol Length. Length of symbol measured from the beginning of the quiet zone (margin) adjacent to the start character to the end of the quiet zone (margin) adjacent to a stop character. Symbology. The structural rules and conventions for representing data within a particular bar code type (e.g. UPC/EAN, Code 39, PDF417, etc.). T U TCP/IP. (Transmission Control Protocol/Internet Protocol) A communications protocol used to internetwork dissimilar systems. This standard is the protocol of the Internet and has become the global standard for communications. TCP provides transport functions, which ensures that the total amount of bytes sent is received correctly at the other end. UDP is an alternate transport that does not guarantee delivery. It is widely used for real-time voice and video transmissions where erroneous packets are not retransmitted. IP provides the routing mechanism. TCP/IP is a routable protocol, which means that all messages contain not only the address of the destination station, but the address of a destination network. This allows TCP/IP messages to be sent to multiple networks within an organization or around the world, hence its use in the worldwide Internet. Every client and server in a TCP/IP network requires an IP address, which is either permanently assigned or dynamically assigned at startup. Telnet. A terminal emulation protocol commonly used on the Internet and TCP/IP-based networks. It allows a user at a terminal or computer to log onto a remote device and run a program. Terminal Emulation. A terminal emulation emulates a character-based mainframe session on a remote non-mainframe terminal, including all display features, commands and function keys. The VC5000 Series supports Terminal Emulations in 3270, 5250 and VT220. Terminate and Stay Resident (TSR). A program under DOS that ends its foreground execution to remain resident in memory to service hardware/software interrupts, providing background operation. It remains in memory and may provide services on behalf of other DOS programs. TFTP. (Trivial File Transfer Protocol) A version of the TCP/IP FTP (File Transfer Protocol) protocol that has no directory or password capability. It is the protocol used for upgrading firmware, downloading software and remote booting of diskless devices. Tolerance. Allowable deviation from the nominal bar or space width. Transmission Control Protocol/Internet Protocol. See TCP/IP. Trivial File Transfer Protocol. See TFTP. TSR. See Terminate and Stay Resident. UDP. User Datagram Protocol. A protocol within the IP protocol suite that is used in place of TCP when a reliable delivery is not required. For example, UDP is used for real-time audio and video traffic where lost packets are 256 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Glossary simply ignored, because there is no time to retransmit. If UDP is used and a reliable delivery is required, packet sequence checking and error notification must be written into the applications. UPC. Universal Product Code. A relatively complex numeric symbology. Each character consists of two bars and two spaces, each of which is any of four widths. The standard symbology for retail food packages in the United States. Visible Laser Diode (VLD). A solid state device which produces visible laser light. V W Warm Boot. A warm boot restarts the mobile computer by closing all running programs. All data that is not saved to flash memory is lost. 257 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Index Numerics 2D bar codes aztec . 166 aztec inverse . 166 code 128 emulation . 161 data matrix . 163 data matrix inverse . 163 maxicode . 164 microPDF417 . 161 microQR . 165 PDF417 . 161 QR code . 164 QR inverse . 165 A Acceptable Aiming Options . 29 auto-triggering mode . 27 B bar codes Australian postal . 154 aztec . 166 aztec inverse . 166 beep after good decode . 74 beeper tone . 75 beeper volume . 76 bookland EAN . 101 bookland ISBN . 113 buffering . 124, 125 cancel . 247 Chinese 2 of 5 . 145 codabar . 139 codabar CLSI editing . 140 codabar lengths . 139 codabar NOTIS editing . 141 code 11 . 129 code 11 lengths . 129 code 128 . 115 code 128 emulation . 161 258 code 128 lengths . 115 code 39 . 120 transmit buffer . 126 code 39 check digit verification . 123 code 39 full ASCII . 124 code 39 lengths . 122 code 39 transmit check digit . 123 code 93 . 127 code 93 lengths . 127 composite CC-A/B . 158 composite CC-C . 158 composite TLC-39 . 159 convert GS1 databar to UPC/EAN . 157 convert UPC-E to UPC-A . 110 convert UPC-E1 to UPC-A . 111 data matrix . 163 data matrix inverse . 163 discrete 2 of 5 . 136 lengths . 138 EAN zero extend . 112 EAN-13/JAN-13 . 101 EAN-8/JAN-8 . 100 flush macro buffer/abort macro PDF entry . 171 FN1 substitution values . 87 fuzzy 1D processing . 79 GS1 catabar limited . 156 GS1 DataBar . 155 GS1 databar expanded . 157 GS1 databar-14 . 156 GS1-128 . 116 host triggering . 78 I 2 of 5 check digit verification . 135 I 2 of 5 convert to EAN-13 . 136 I 2 of 5 transmit check digit . 135 illumination . 80 interleaved 2 of 5 . 132 convert to EAN-13 . 136 lengths . 133 inverse 1D . 149 ISBT 128 . 117 ISBT concatenation . 118, 119 ISBT concatenation redundancy . 119 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY ISSN EAN . 114 Japan postal . 153 matrix 2 of 5 . 146 matrix 2 of 5 check digit . 149 matrix 2 of 5 lengths . 147 matrix 2 of 5 redundancy . 148 maxicode . 164 microPDF417 . 161 microQR . 165 MSI . 142 MSI check digit algorithm . 145 MSI check digits . 143 MSI lengths . 142 MSI transmit check digit . 144 Netherlands KIX code . 154 numeric bar codes . 247 parameter scanning . 73 PDF417 . 161 picklist modes . 78 postal . 150 prefix/suffix values . 84 QR code . 164 QR inverse . 165 samples . 242 scan data options . 85 set defaults . 72 supplementals . 102 symbologies default table . 90 transmit code ID character . 83 transmit matrix 2 of 5 check digit . 149 transmit no read message . 88 transmit UK postal check digit . 152 transmit US postal check digit . 151 UCC coupon extended code . 114 UK postal . 152 UPC composite mode . 159 UPC/EAN coupon code . 114 supp redundancy . 105, 106 UPC/EAN/JAN supplemental AIM ID format . 106 supplemental redundancy . 105 UPC-A . 99 UPC-A preamble . 107 UPC-A/E/E1 check digit . 106, 107 UPC-E . 99 UPC-E preamble . 108 UPC-E1 . 99 UPU FICS postal . 155 US planet . 151 US postnet . 150 USPS 4CB/One Code/Intelligent Mail . 155 charging . 20, 35 battery Index Battery Age Test . 35 Battery Release . 20 beep sequences . 23 bright center dot . 28 bullets . 13 C change trigger configuration . 29 Charge Status LED . 36 Charger . 31 charging batteries . 20, 35 Charging Imager battery . 34 Clean Boot . 30 codabar bar codes CLSI editing . 140 codabar . 139 lengths . 139 NOTIS editing . 141 code 11 bar codes code 11 . 129 lengths . 129 code 128 bar codes code 128 . 115 GS1-128 . 116 ISBT 128 . 117 ISBT concatenation . 118, 119 ISBT concatenation redundancy . 119 lengths . 115 code 128 emulation bar codes . 161 code 39 bar codes buffering . 124, 125 check digit verification . 123 code 39 . 120 full ASCII . 124 lengths . 122 transmit check digit . 123 code 93 bar codes code 93 . 127 lengths . 127 code ID character . 83 code identifiers AIM code IDs . 237 modifier characters . 238 Symbol . 236 Cold Boot . 30 composite bar codes composite CC-A/B . 158 composite CC-C . 158 composite TLC-39 . 159 UPC composite mode . 159 conventions notational . 13 Corded Adapter . 21 Cradle charger . 33 259 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Index Cradle Installation . 33 Cradle wall mount . 33 Cross Hair Lines . 28 lengths . 142 MSI . 142 transmit check digit . 144 D data matrix bar codes . 163 default parameters standard default table . 229 symbologies . 90 user preferences . 71 discrete 2 of 5 bar codes discrete 2 of 5 . 136 E exposure options illumination . 80 F Finger Strap . 23 G getting started . 20, 35 GS1 DataBar . 155 GS1 databar convert GS1 databar to UPC/EAN . 157 I illumination . 80 index and middle fingers . 22 information, service . 14 interleaved 2 of 5 bar codes check digit verification . 135 convert to EAN-13 . 136 transmit check digit . 135 M macro PDF . 171 flush buffer/abort PDF entry . 171 Manual Triggering . 27 matrix 2 of 5 bar codes . 146 check digit . 149 lengths . 147 redundancy . 148 transmit check digit . 149 maxicode bar codes . 164 microPDF417 bar codes . 161 MSI bar codes check digit algorithm . 145 check digits . 143 260 N notational conventions . 13 P parts of the mobile computer . 15 PDF417 bar codes . 161 postal codes . 150 Australian postal . 154 Japan postal . 153 Netherlands KIX code . 154 transmit UK postal check digit . 152 transmit US postal check digit . 151 UK postal . 152 UPU FICS postal . 155 US planet . 151 US postnet . 150 USPS 4CB/One Code/Intelligent Mail . 155 Q QR code bar codes . 164 R reestablish Bluetooth connection . 26 Remove Bluetooth connection . 26 Replaceable Parts . 45 Resetting . 30 S sample bar codes . 242 scanning errors . 71, 90 sequence example . 70, 89 service information . 14 SMDK for C . 14 SSI Simple Serial Interface . 172 standard default parameters . 229 Standby . 24 Strap Buckle . 19 Symbol Mobility Developer Kit for C . 14 Symbol Scan Orientation . 28 symbology default parameters . 90 T trigger programming via host . 78 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Trigger Position . 19 Trigger Swivel Assembly . 19 U unpacking . 15 unpairing barcode . 26 UPC/EAN bar codes bookland EAN . 101 bookland ISBN . 113 check digit . 106, 107 convert UPC-E to UPC-A . 110 convert UPC-E1 to UPC-A . 111 EAN zero extend . 112 EAN-13/JAN-13 . 101 EAN-8/JAN-8 . 100 ISSN EAN . 114 supplementals . 102 UCC coupon extended code . 114 UPC-A . 99 UPC-A preamble . 107 UPC-E . 99 UPC-E preamble . 108 UPC-E1 . 99 user preferences parameters . 71 W Warm Boot . 30 Index 261 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY www.zebra.com 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY
1 | User Manual Regulatory | Users Manual | 1.29 MiB |
RS507 Hands-Free Imager Regulatory Guide 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY 2 RS507 Zebra reserves the right to make changes to any product to improve reliability, function, or design. Zebra does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, apparatus, machine, material, method, or process in which Zebra products might be used. An implied license exists only for equipment, circuits, and subsystems contained in Zebra products. Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. Zebra Technologies Corporation Lincolnshire, IL U.S.A. www.zebra.com Warranty For the complete Zebra hardware product warranty statement, go to:
www.zebra.com/warranty. 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY Regulatory Guide Regulatory Information 3 This guide applies to Model Numbers RS507 and RS507X. All Zebra devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Local language translations are available at the following website:
www.zebra.com/support. CAUTION Any changes or modifications to Zebra equipment, not expressly approved by Zebra, could void the user's authority to operate the equipment. Only use Zebra approved and UL Listed accessories, battery packs and battery chargers. Do NOT attempt to charge damp/wet mobile computers or batteries. All components must be dry before connecting to an external power source. Bluetooth Wireless Technology This is an approved Bluetooth product. For more information or to view End Product Listing, please visit http://www.bluetooth.org/tpg/listings.cfm Wireless Device Country Approvals Regulatory markings, subject to certification, are applied to the device signifying the radio(s) is/are approved for use in the following countries: United States, Canada, Japan, China, S. Korea, Australia, and Europe (see note below). Please refer to the Zebra Declaration of Conformity (DoC) for details of other country markings. This is available at www.zebra.com/doc. Note: For 2.4GHz Products: Europe includes, Austria, Belgium, Bulgaria, Czech Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY 4 RS507 Health and Safety Recommendations Ergonomic Recommendations CAUTION In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your local Health &
Safety Manager to ensure that you are adhering to your companys safety programs to prevent employee injury. Reduce or eliminate repetitive motion Maintain a natural position Reduce or eliminate excessive force Keep objects that are used frequently within easy reach Perform tasks at correct heights Reduce or eliminate vibration Reduce or eliminate direct pressure Provide adjustable workstations Provide adequate clearance Provide a suitable working environment Improve work procedures. Warnings for Use of Wireless Devices Please observe all warning notices with regard to the usage of wireless devices. Potentially Hazardous Atmospheres - Vehicles Use You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants etc. and areas where the air contains chemicals or particles (such as grain, dust, or metal powders) and any other area where you would normally be advised to turn off your vehicle engine. Safety in Hospitals Wireless devices transmit radio frequency energy and may affect medical electrical equipment. Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics or healthcare facilities. These requests are designed to prevent possible interference with sensitive medical equipment. 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY Regulatory Guide 5 Pacemakers Pacemaker manufacturers recommended that a minimum of 15cm (6 inches) be maintained between a handheld wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with independent research and recommendations by Wireless Technology Research. Persons with Pacemakers:
Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker when turned ON. Should not carry the device in a breast pocket. Should use the ear furthest from the pacemaker to minimize the potential for interference. If you have any reason to suspect that interference is taking place, turn OFF your device. Other Medical Devices Please consult your physician or the manufacturer of the medical device, to determine if the operation of your wireless product may interfere with the medical device. RF Exposure Guidelines Safety Information Reducing RF Exposure - Use Properly Only operate the device in accordance with the instructions supplied. International The device complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices. For information on
"International" human exposure to electromagnetic fields refer to the Zebra Declaration of Conformity (DoC) at: www.zebra.com/doc. 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY 6 EU RS507 Handheld Devices This device was tested for typical body-worn operation. Use only Zebra tested and approved belt-clips, holsters, and similar accessories to ensure EU Compliance. US and Canada Handheld Devices This device was tested for typical body-worn operation. Use only Zebra tested and approved belt-clips, holsters, and similar accessories to ensure FCC Compliance. The use of third-party belt-clips, holsters, and similar accessories may not comply with FCC RF exposure compliance requirements, and should be avoided. Laser Devices Complies with 21CFR1040.10 & 1040.11 except for deviations pursuant to Laser Notice NO. 50, dated June 24, 2007 and IEC/EN 60825-1:2007 and/or IEC/EN 60825-1:2014. The laser classification is marked on one of the labels on the device. Class 1 Laser devices are not considered to be hazardous when used for their intended purpose. The following statement is required to comply with US and international regulations:
Caution: Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous laser light exposure. Class 2 laser Imagers use a low power, visible light diode. As with any very bright light source, such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful. 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY Regulatory Guide Imager Labeling P /N : RS507-IM20000CTWR P /N : RS507-IM20000CTWR S/N: MXA4NG84 S/N: MXA4NG84 MXA4NG84 MXA4NG84 BID:
BID:
001570BBB1F3 001570BBB1F3 MFD:
MFD:
21Nov09 5 21Nov09 5 N N 4 4 1 1 D D
:
:
7 Country Stamp
(example) Batteries Taiwan - Recycling EPA (Environmental Protection Administration) requires dry battery producing or importing firms in accordance with Article 15 of the Waste Disposal Act are required to indicate the recycling marks on the batteries used in sales, giveaway or promotion. Contact a qualified Taiwanese recycler for proper battery disposal. Battery Information Zebra rechargeable battery packs are designed and constructed to the highest standards within the industry. However, there are limitations to how long a battery can operate or be stored before needing replacement. Many factors affect the actual life cycle of a battery pack, such as heat, cold, harsh environmental conditions and severe drops. When batteries are stored over six (6) months, some irreversible deterioration in overall battery quality may occur. Store batteries at half of full charge in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of metallic parts and electrolyte leakage. When storing batteries for one year or longer, the charge level should be verified at least once a year and charged to half of full charge. 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY 8 RS507 Replace the battery when a significant loss of run time is detected. Standard warranty period for all Zebra batteries is 3 months, regardless if the battery was purchased separately or included as part of the mobile computer or bar code scanner. For more information on Zebra batteries, please visit:
www.zebra.com/batterybasics. Battery Safety Guidelines The area in which the units are charged should be clear of debris and combustible materials or chemicals. Particular care should be taken where the device is charged in a non commercial environment. Follow battery usage, storage, and charging guidelines found in the user's guide. Improper battery use may result in a fire, explosion, or other hazard. To charge the mobile device battery, the battery and charger temperatures must be between +32 F and +104 F (0 C and +40 C) Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present a risk of fire, explosion, leakage, or other hazard. If you have any questions about the compatibility of a battery or a charger, contact Zebra support. Do not disassemble or open, crush, bend or deform, puncture, or shred. Severe impact from dropping any battery-operated device on a hard surface could cause the battery to overheat. Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals. Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, or expose to fire, explosion, or other hazard. Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle or near a radiator or other heat source. Do not place battery into a microwave oven or dryer. Battery usage by children should be supervised. Please follow local regulations to promptly dispose of used re-chargeable batteries. Do not dispose of batteries in fire. 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY Regulatory Guide 9 Seek medical advice immediately if a battery has been swallowed. In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with large amounts of water and seek medical advice. If you suspect damage to your equipment or battery, contact Zebra support to arrange for inspection. In accordance with Clause 5, IEC 825 and EN60825, the following information is provided to the user:
Radio Frequency Interference Requirements-FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna Connect the equipment into an outlet on a circuit different from that to which Increase the separation between the equipment and receiver the receiver is connected Consult the dealer or an experienced radio/TV technician for help. Radio Transmitters (Part 15) - USA This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Radio Frequency Interference Requirements - Canada CAN ICES-3 (B)/NMB-3(B) 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY 10 RS507 Radio Transmitters - Canada This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radio lectrique subi mme si le brouillage est susceptible d'en compromettre le fonctionnement. Label Marking: The Term 'IC:' before the radio certification only signifies that Industry Canada technical specifications were met. Etiquette de marquage: Le terme "IC" avant la certification radio signifie que le produit est compatible avec le spcification Industrie Canada. Marking and European Economic Area
(EEA) Statement of Compliance for Wireless Devices Zebra hereby declares that this radio equipment is in compliance with Directive 2011/65/EU and 1999/5/EC or 2014/53/EU (2014/53/EU supersedes 1999/5/EC from 13th June 2017). The full text of the EU Declaration of Conformity is available at the following internet address: www.zebra.com/doc. Japan (VCCI) - Voluntary Control Council for Interference Class B ITE B VCCI-B This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY Regulatory Guide 11 near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual. Korea Warning Statement for Class B ITE B
( ) Other Countries
(B )
,
. Declaraes Regulamentares para RS507 - Brazil Note: The certification mark applied to the RS507 is for Restrict Radiation Equipment. This equipment operates on a secondary basis and does not have the right for protection against harmful interference from other users including same equipment types. Also this equipment must not cause interference to systems operating on primary basis. For more information consult the website www.anatel.gov.br. Nota: "A marca de certificao se aplica ao Transceptor, modelo RS507. Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio."
Para maiores informaes sobre ANATEL consulte o site: www.anatel.gov.br. Eurasian Customs Union EAC. Mexico Restrict Frequency Range to: 2.450 - 2.4835 GHz. Sri Lanka-
Restrict Frequency Range to: 2.400 - 2.430 GHz. 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY 12 Taiwan -
RS507 2.400 - 2.4835 GHz
: 27dBm 5.250 - 5.350 GHz 5.725 - 5.850 GHz 2.4GHz 11 50 GHz Korea Waste Electrical and Electronic Equipment (WEEE) English: For EU Customers: All products at the end of their life must be returned to Zebra for recycling. For information on how to return product, please go to:
www.zebra.com/weee. etina: Pro zkaznky z EU: Vechny produkty je nutn po skonen jejich ivotnosti vrtit spolenosti Zebra k recyklaci. Informace o zpsobu vrcen produktu najdete na webov strnce: www.zebra.com/weee. Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til recirkulering, nr de er udtjent. Ls oplysningerne om returnering af produkter p:
www.zebra.com/weee. 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY Regulatory Guide 13 Deutsch: Fr Kunden innerhalb der EU: Alle Produkte mssen am Ende ihrer Lebensdauer zum Recycling an Zebra zurckgesandt werden. Informationen zur Rcksendung von Produkten finden Sie unter www.zebra.com/weee. Eesti: EL klientidele: kik tooted tuleb nende eluea lppedes tagastada taaskasutamise eesmrgil Zebra'ile. Lisainformatsiooni saamiseks toote tagastamise kohta klastage palun aadressi: www.zebra.com/weee. Espaol: Para clientes en la Unin Europea: todos los productos debern entregarse a Zebra al final de su ciclo de vida para que sean reciclados. Si desea ms informacin sobre cmo devolver un producto, visite: www.zebra.com/weee. Franais: Clients de l'Union Europenne: Tous les produits en fin de cycle de vie doivent tre retourns Zebra pour recyclage. Pour de plus amples informations sur le retour de produits, consultez : www.zebra.com/weee. Hrvatski: Za kupce u Europskoj uniji: Svi se proizvodi po isteku vijeka trajanja moraju vratiti tvrtki Zebra na recikliranje. Informacije o nainu vraanja proizvoda potraite na web-stranici: www.zebra.com/weee. Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono essere restituiti a Zebra al fine di consentirne il riciclaggio. Per informazioni sulle modalit di restituzione, visitare il seguente sito Web:
www.zebra.com/weee. Latvieu: ES klientiem: visi produkti pc to kalpoanas ma beigm ir jnogd atpaka Zebra otrreizjai prstrdei. Lai iegtu informciju par produktu nogdanu Zebra, ldzu, skatiet: www.zebra.com/weee. Lietuvi: ES vartotojams: visi gaminiai, pasibaigus j eksploatacijos laikui, turi bti grinti utilizuoti kompanij Zebra. Daugiau informacijos, kaip grinti gamin, rasite: www.zebra.com/weee. Magyar: Az EU-ban vsrlknak: Minden tnkrement termket a Zebra vllalathoz kell eljuttatni jrahasznosts cljbl. A termk visszajuttatsnak mdjval kapcsolatos tudnivalkrt ltogasson el a www.zebra.com/weee weboldalra. Malti: Gal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aar tal-ajja ta' l-uu taghom, iridu jiu rritornati gand Zebra gar-riikla. Gal aktar tagrif dwar kif gandek tirritorna l-prodott, jekk jogbok ur: www.zebra.com/weee. Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar Zebra te worden teruggezonden voor recycling. Raadpleeg www.zebra.com/weee voor meer informatie over het terugzenden van producten. Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji naley zwrci do firmy Zebra w celu ich utylizacji. Informacje na temat zwrotu produktw znajduj si na stronie internetowej www.zebra.com/weee. Portugus: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos Zebra para reciclagem. Para obter informaes sobre como devolver o produto, visite: www.zebra.com/weee. 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY 14 RS507 Romnesc: Pentru clienii din UE: Toate produsele, la sfritul duratei lor de funcionare, trebuie returnate la Zebra pentru reciclare. Pentru informaii despre returnarea produsului, accesai: www.zebra.com/weee. Slovenina: Pre zkaznkov z krajn EU: Vetky vrobky musia by po uplynut doby ich ivotnosti vrten spolonosti Zebra na recyklciu. Bliie informcie o vrten vrobkov njdete na: www.zebra.com/weee. Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku ivljenjske dobe vrniti podjetju Zebra za reciklao. Za informacije o vrailu izdelka obiite:
www.zebra.com/weee. Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrtettvksi Zebra-yhtin, kun tuotetta ei en kytet. Listietoja tuotteen palauttamisesta on osoitteessa www.zebra.com/weee. Svenska: Fr kunder inom EU: Alla produkter som uppntt sin livslngd mste returneras till Zebra fr tervinning. Information om hur du returnerar produkten finns p www.zebra.com/weee. Trke: AB Mterileri iin: Kullanm sresi dolan tm rnler geri dntrme iin Zebra'ya iade edilmelidir. rnlerin nasl iade edilecei hakknda bilgi iin ltfen u adresi ziyaret edin: www.zebra.com/weee.
: ..: ,
, Zebra .
, www.zebra.com/weee .
: :
Zebra .
, :
www.zebra.com/weee. 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY Regulatory Guide CMM Disclosure 15
(Parts)
(Metal Parts)
(Circuit Modules)
(Cables and Cable Assemblies)
(Plastic and Polymeric Parts)
(Optics and Optical Components)
(Batteries)
(Cd) o o o o o o
(Cr (VI)) o o o o o o
(PBB) o o o o o o
(Pb) x x x x x x
(Hg) o o o o o o 20
(PBDE) o o o o o o
This table was created to comply with China RoHS requirements. 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY 2017 ZIH Corp and/or its affiliates. All rights reserved. Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. www.zebra.com 72-115987-07 Rev. A - 12/17 11 / 16 / 2017 REVIEW ONLY REVIEW ONLY - REVIEW ONLY
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2017-11-22 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2017-11-22
|
||||
1 | Applicant's complete, legal business name |
Zebra Technologies Corporation
|
||||
1 | FCC Registration Number (FRN) |
0015642663
|
||||
1 | Physical Address |
1 Zebra Plaza
|
||||
1 |
Holtsville, NY
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
UZ7
|
||||
1 | Equipment Product Code |
RS507X
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
L******** Z****
|
||||
1 | Title |
Regulatory Specialist
|
||||
1 | Telephone Number |
346-2********
|
||||
1 | Fax Number |
631-6********
|
||||
1 |
L******@zebra.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 05/21/2018 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Hands Free Imager | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power listed is conducted. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
SPORTON International Inc.
|
||||
1 | Name |
A**** C******
|
||||
1 | Telephone Number |
886-3******** Extension:
|
||||
1 | Fax Number |
886-3********
|
||||
1 |
a******@sporton.com.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0024000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC