all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User Manual FL3678 | Users Manual | 2.10 MiB | ||||
1 2 |
|
User Manual STB3678 | Users Manual | 2.10 MiB | ||||
1 2 | Cover Letter(s) | |||||||
1 2 | External Photos | |||||||
1 2 | Internal Photos | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | Test Report | |||||||
1 2 | Test Setup Photos | |||||||
1 2 | RF Exposure Info |
1 2 | User Manual FL3678 | Users Manual | 2.10 MiB |
dangerous. degrees C. Use of alternative power supply will invalidate any approvals given to this unit and may be electrical ratings: Output 12Vdc, min 4.16A, with a maximum ambient temperature of at least 50 Use ONLY a Zebra approved UL LISTED ITE (IEC/EN 60950-1, LPS/SELV) power supply with Power Supply CAUTIONOperation of the device without regulatory approval is illegal. Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Note: Europe includes, Austria, Belgium, Bulgaria, Croatia,Czech Republic, Cyprus, Denmark, is available at: http://www.zebra.com/doc. Please refer to the Declaration of Conformity (DoC) for details of other country markings. This Korea, Australia, and Europe. are approved for use in the following countries: United States, Canada, Japan, China, South Regulatory markings, subject to certification, are applied to the device signifying the radio(s) is/
Wireless Device Country Approvals please visit https://www.bluetooth.org/tpg/listings.cfm. This is an approved Bluetooth product. For more information or to view End Product Listing, Bluetooth Wireless Technology may be obtained from http://www.zebra.com/doc. other relevant provisions of Directive 1995/5/EC and 2011/65/EU. A Declaration of Conformity Zebra hereby, declares that this device is in compliance with the essential requirements and Statement of Compliance Declared maximum operating temperature: 50oC. before connecting to an external power source. Do NOT attempt to charge damp/wet batteries. All components must be dry battery chargers. Only use Zebra approved and UL Listed accessories, battery packs and CAUTION the user's authority to operate the equipment. Any changes or modifications to Zebra equipment not expressly approved by Zebra could void Local language translations are available at the following website: http://www.zebra.com/doc. they are sold and will be labeled as required. All Zebra devices are designed to be compliant with the rules and regulations in the locations This guide applies to the following Model Number: FLB3678 This device is approved under Zebra Technologies Corporation. Regulatory Information RF Exposure Guidelines Reducing RF Exposure Use Properly Only operate the device in accordance with the instructions supplied. The device complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices. For information on International human exposure to electromagnetic fields refer to the Zebra Declaration of Conformity (DoC) at http:www.zebra.com/doc. For further information on the safety of RF energy from wireless devices, see http://responsibility.zebra.com/index.php/downloads/, which is located under Wireless Communications and Health. Europe Remote and Standalone Antenna Configurations - To comply with EU RF exposure requirements, antennas that are mounted externally at remote locations or operating near users at stand-alone desktop of similar configurations must operate with a minimum separation distance of 20 cm from all persons. US and Canada To comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must not be co-located or operating in conjunction with any other transmitter/antenna except those already approved in this filling. Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. NOTE IMPORTANTE: (Pour l'utilisation de dispositifs mobiles) Dclaration d'exposition aux radiations:
Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Remote and Standalone Antenna Configurations To comply with FCC RF exposure requirements, antennas that are mounted externally at remote locations or operating near users at stand-alone desktop of similar configurations must operate with a minimum separation distance of 20 cm from all persons. Radio Frequency Interference Requirements-FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Radio Transmitters (Part 15) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radio Frequency Interference Requirements-Canada CAN ICES-3 (B)/NMB-3(B) Radio Transmitters - This device complies with Industry Canada's license-exempt RSS's. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment in an outlet on a circuit different from the receiver is connection Consult the dealer or an experienced radio/TV technician for help added to your vehicle. your vehicle. You should also consult the manufacturer about any equipment that has been vehicles (including safety systems). Check with the manufacturer or its representative regarding RF signals may affect improperly installed or inadequately shielded electronic systems in motor Vehicle Installation Improve work procedures. Provide a suitable working environment Provide adequate clearance Provide adjustable workstations Reduce or eliminate direct pressure Reduce or eliminate vibration Perform tasks at correct heights Keep objects that are used frequently within easy reach Reduce or eliminate excessive force Maintain a natural position Reduce or eliminate repetitive motion are adhering to your companys safety programs to prevent employee injury. recommendations below. Consult with your local Health & Safety Manager to ensure that you Caution: In order to avoid or minimize the potential risk of ergonomic injury follow the Recommendations Health and Safety RecommendationsErgonomic http://www.zebra.com Lincolnshire, IL USA Zebra Technologies Corporation 2015 ZIH Corp and/or its affiliates. All rights reserved. jurisdictions worldwide. All other trademarks are the property of their respective owners. Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many exists only for equipment, circuits, and subsystems contained in Zebra products. any Zebra Technologies Corporation, intellectual property rights. An implied license No license is granted, either expressly or by implication, estoppel, or otherwise under application or use of any product, circuit, or application described herein. Zebra does not assume any product liability arising out of, or in connection with, the reliability, function, or design. Zebra reserves the right to make changes to any software or product to improve 2015 Symbol Technologies, Inc. Cet appareil est conforme exempts de licence le flux RSS de Industrie Canada. Son fonctionnement est soumis aux deux conditions suivantes:
(1) Ce dispositif ne peut causer des interfrences; et (2) Cet appareil doit accepter toute interfrence, y compris les interfrences qui peuvent causer un mauvais fonctionnement de l'appareil. Radio Frequency Interference Requirements-Brazil For more information consult the website www.anatel.gov.br Declaraes Regulamentares para STB/FLB3678 - Brazil Nota: A marca de certificao se aplica ao Transceptor, modelo STB/FLB3678. Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Para maiores informaes sobre ANATEL consulte o site: www.anatel.gov.br Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Este produto est homologado pela Anatel, de acordo com os procedimentos regulamentados pela Resoluo n242/2000 e atende aos requisitos tcnicos aplicados, incluindo os limites de exposio da Taxa de Absoro Especfica referente a campos eltricos, magnticos e eletromagnticos de radiofrequncia, de acordo com as Resolues n 303/2002 e 533/2009. Este dispositivo est em conformidade com as diretrizes de exposio radiofrequncia quando posicionado pelo menos 20 centmetros de distncia do corpo. Para maiores informaes, consulte o site da Anatel. Chile Este equipo cumple con la Resolucin No 403 de 2008, de la Subsecretaria de telecomunicaciones, relativa a radiaciones electromagnticas. Ukraine Japan (VCCI) - Voluntary Control Council for Interference Class B ITE Taiwan Industrial Scanner Cradle Quick Reference Guide FLB3678 CRADLE South Korea Korean Warning Statement for Class B ITE B
( )
(B )
, . China Thailand Marking and European Economic Area (EEA) Bluetooth Wireless Technology for use through the EEA have the following restrictions:
Maximum radiated transmit power of 100mW EIRP in the freq. range 2.400 -2.4835 GHz Warnings for Use of Wireless Devices Caution: Please observe all warning notices with regard to the usage of wireless devices. Potentially Hazardous Atmospheres - Vehicles Use You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants, etc. and areas where the air contains chemicals or particles such as grain, dust, or metal powders and any other area where you would normally be advised to turn off your vehicle engine. Safety in Hospitals Wireless devices transmit radio frequency energy and may affect medical electrical equipment. Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics or healthcare facilities. These requests are designed to prevent possible interference with sensitive medical equipment. Pacemakers Pacemaker manufacturers recommended that a minimum of 15cm (6 inches) be maintained between a hand-held wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with independent research and recommendations by Wireless Technology Research. Other Medical Devices Please consult your physician or the manufacturer of the medical device, to determine if the operation of your wireless product may interfere with the medical device. Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker when turned ON. Should not carry the device in a breast pocket. Should use the ear furthest from the pacemaker to minimize the potential for interference. If you have any reason to suspect that interference is taking place, turn OFF your device. Waste Electrical and Electronic Equipment (WEEE) Bulgarish: : Zebra
. , :http://
www.zebra.com/weee. MN002336A01 Revision Draft 1- December 2015 2015 ZIH Corp and/or its affiliates. All rights reserved. jurisdictions worldwide. All other trademarks are the property of their respective owners. Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many http://www.zebra.com Lincolnshire, IL U.S.A. Zebra Technologies Corporation our website: http://www.zebra.com for the most updated warranty terms. queries, please call Zebra Technologies Corporation at +65 6858 0722. You may also visit rights and remedies you may have under the Australian Consumer Law. If you have any Zebra Technologies Corporation Australia's limited warranty above is in addition to any of acceptable quality and the failure does not amount to a major failure. damage. You are also entitled to have the goods repaired or replaced if the goods fail to be refund for a major failure and compensation for any other reasonably foreseeable loss or be excluded under the Australia Consumer Law. You are entitled to a replacement or
#05-02/03, Singapore 068895, Singapore. Our goods come with guarantees that cannot This warranty is given by Zebra Technologies Asia Pacific Pte. Ltd., 71 Robinson Road, For Australia Only:
http://www.zebra.com/warranty. For the complete Zebra hardware product warranty statement, go to:
Warranty For the latest version of this guide go to: http://www.zebra.com/support. Support at: http://www.zebra.com/support. Systems Support. If there is a problem with the equipment, they will contact Zebra If you have a problem using the equipment, contact your facilitys Technical or Service Information etina: Pro zkaznky z EU: Vechny produkty je nutn po skonen jejich ivotnosti vrtit spolenosti Zebra k recyklaci. Informace o zpsobu vrcen produktu najdete na webov strnce:
http://www.zebra.com/weee. Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til recirkulering, nr de er udtjent. Ls oplysningerne om returnering af produkter p: http://www.zebra.com/weee. Deutsch: Fr Kunden innerhalb der EU: Alle Produkte mssen am Ende ihrer Lebensdauer zum Recycling an Zebra zurckgesandt werden. Informationen zur Rcksendung von Produkten finden Sie unter http://
www.zebra.com/weee.
: ..: , , Zebra . , http://www.zebra.com/weee . Eesti: EL klientidele: kik tooted tuleb nende eluea lppedes tagastada taaskasutamise eesmrgil Zebra'ile. Lisainformatsiooni saamiseks toote tagastamise kohta klastage palun aadressi: http://www.zebra.com/weee. English: For EU Customers: All products at the end of their life must be returned to Zebra for recycling. For information on how to return product, please go to: http://www.zebra.com/weee. Espaol: Para clientes en la Unin Europea: todos los productos debern entregarse a Zebra al final de su ciclo de vida para que sean reciclados. Si desea ms informacin sobre cmo devolver un producto, visite:
http://www.zebra.com/weee. Franais: Clients de l'Union Europenne : Tous les produits en fin de cycle de vie doivent tre retourns Zebra pour recyclage. Pour de plus amples informations sur le retour de produits, consultez : http://www.zebra.com/weee. Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono essere restituiti a Zebra al fine di consentirne il riciclaggio. Per informazioni sulle modalit di restituzione, visitare il seguente sito Web: http://www.zebra.com/weee. Latvieu: ES klientiem: visi produkti pc to kalpoanas ma beigm ir jnogd atpaka Zebra otrreizjai prstrdei. Lai iegtu informciju par produktu nogdanu Zebra, ldzu, skatiet: http://www.zebra.com/weee. Lietuvi: ES vartotojams: visi gaminiai, pasibaigus j eksploatacijos laikui, turi bti grinti utilizuoti kompanij Zebra. Daugiau informacijos, kaip grinti gamin, rasite: http://www.zebra.com/weee. Magyar: Az EU-ban vsrlknak: Minden tnkrement termket a Zebra vllalathoz kell eljuttatni jrahasznosts cljbl. A termk visszajuttatsnak mdjval kapcsolatos tudnivalkrt ltogasson el a http://www.zebra.com/weee weboldalra. Malti: Gal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aar tal-ajja ta' l-uu taghom, iridu jiu rritornati gand Zebra gar-riikla. Gal aktar tagrif dwar kif gandek tirritorna l-prodott, jekk jogbok ur:
http://www.zebra.com/weee. Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar Zebra te worden teruggezonden voor recycling. Raadpleeg http://www.zebra.com/weee voor meer informatie over het terugzenden van producten. Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji naley zwrci do firmy Zebra w celu ich utylizacji. Informacje na temat zwrotu produktw znajduj si na stronie internetowej http://www.zebra.com/weee. Portugus: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos Zebra para reciclagem. Para obter informaes sobre como devolver o produto, visite: http://www.zebra.com/weee. Romnesc: Pentru clienii din UE: Toate produsele, la sfritul duratei lor de funcionare, trebuie returnate la Zebra pentru reciclare. Pentru informaii despre returnarea produsului, accesai: http://www.zebra.com/weee. Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku ivljenjske dobe vrniti podjetju Zebra za reciklao. Za informacije o vrailu izdelka obiite: http://www.zebra.com/weee. Slovenina: Pre zkaznkov z krajn EU: Vetky vrobky musia by po uplynut doby ich ivotnosti vrten spolonosti Zebra na recyklciu. Bliie informcie o vrten vrobkov njdete na:http://www.zebra.com/weee. Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrtettvksi Zebra-yhtin, kun tuotetta ei en kytet. Listietoja tuotteen palauttamisesta on osoitteessa http://www.zebra.com/weee. Svenska: Fr kunder inom EU: Alla produkter som uppntt sin livslngd mste returneras till Zebra fr tervinning. Information om hur du returnerar produkten finns p http://www.zebra.com/weee. Trke: AB Mterileri iin: Kullanm sresi dolan tm rnler geri dntrme iin Zebra'ya iade edilmelidir. rnlerin nasl iade edilecei hakknda bilgi iin ltfen u adresi ziyaret edin: http://www.zebra.com/weee. TURKISH WEEE Statement of Compliance Draft 1_Reg Submission Introduction The FLB3678 cordless scanner cradle acts as charger and radio communication interface for the XX3678 cordless scanner. It attaches to a mounting bracket using three isolators. The bracket is then mounted on the forklift surface. The FLB3678 cradle receives data from the scanner via a Bluetooth radio, and sends that data to the host through an attached cable. The cradle also charges the scanners internal battery pack when the scanner is inserted. A portable power supply on the forklift supplies power to the cradle. This document provides basic instructions on setting up and using the cradle. Any discussion of transmission of information refers specifically to the FLB3678 cradle. CAUTION LS3578 and DS3578 cordless scanners are incompatible with FLB3678 cradles. Equipment Supplied The cradle package includes:
Cradle Mounting bracket with isolators Three 8-32 x 1.5 Phillips head screws (for attaching cradle to mounting bracket). Accessories The following equipment may be needed:
Three 1/4-20 screws, minimum length 1.0 (for fastening bracket to mounting surface). Save the shipping container for storing or shipping. Inspect all equipment for damage. If anything is damaged or missing, call an authorized Zebra Support Center immediately. Related Documentation LI3678 Product Reference Guide, p/n MN001740Axx. LI3678 Quick Start Guide, p/n MN002323Axx. STB3678 Quick Reference Guide, p/n MN002334Axx. This documentation is available at: www.zebra.com/support. Cradle Parts Top View Canopy Latch PAIR Mounting Screw Hole Charging/
Communications Contacts Foot Latch Drain Hole Pairing Bar Code Drain Hole Mounting Screw Hole LED Page Button Mounting Screw Hole Bottom View Rubber Feet Host Cable Latch Host Cable (Under Latch) Rubber Feet Mounting Screw Hole Host Cable Guide Foot Latch Release Mounting Screw Hole Cradle Connections IMPORTANT Connect the interface cable and power supply (if necessary) in the following order to ensure proper operation of the scanner and cradle. Latch Host Port
(Under Latch) 1. Connect the appropriate cable to the power supply and an AC power source, if necessary. This will ensure detection of the host and prevent inadvertently back powering the cradle from improper detection of the host. Insert the interface cable into the host port. 2. 3. Lift the latch and connect the interface cable into the cradles host port, then close the latch. If applicable, thread the host cable over the cable hook and run the host and power cables into their respective cable grooves, or use cable ties to secure them to the mounting plate after it is attached to the cradle (see Mounting the Cradle). 5. Pair the scanner to the cradle either by 4. inserting it in the cradle (if Pair on Contacts is enabled) or by scanning the pairing bar code. If necessary, scan the appropriate host bar code (for non-autodetected interfaces). Refer to the Product Reference Guide. 6. Changing the Host Interface To connect to a different host, or to the same host through a different cable:
1. Unplug the interface cable from the host. 2. Unplug the power supply from the cradle. 3. Connect the interface cable to the new host, or the new interface cable to the existing host. 4. Reconnect the power supply, if required. 5. If necessary, scan the appropriate host bar code (for non-autodetected interfaces). Refer to the Product Reference Guide. Using a Host Interface to Supply Power Some hosts can provide power to the cradle via the host interface, instead of an external power supply. CAUTION Always disconnect the DC power supply BEFORE disconnecting the cable to the host end or the cradle may not recognize the new host. Mounting the Cradle Horizontal Mount 1. Ensure the desk/wall mount 2. converter knob is in the correct position, shown at right. If mounting the cradle horizontally where no fastening is necessary, peel the protective paper from the back of the rubber feet included with the cradle packaging, and attach the feet to the cradle at the indentations in the plastic. These feet provide traction and prevent surface damage. Converter Knob Horizontal Position Vertical Mount NOTE Do not use the rubber feet when mounting in a vertical orientation. To mount the cradle on a vertical surface:
1. Use a Philips screwdriver to turn the desk/wall mount converter knob to the position shown below. The front latches protract to engage the depressions at the base of the scanners handle. 2. Attach the interface and power 3. Press the cables into the cable cables (see Cradle Connections). grooves. 4. Position the cradle on the mounting surface, or use the template included in this guide. 5. Mark the surface through the three holes on the bottom of the cradle, or use the mounting template to determine the location of the screw holes. 6. Pre-drill holes to accommodate three 1.5" #8 Philips head screws. 7. Attach the cradle securely to the surface. 8. Place the scanner in the cradle. Converter Knob Vertical Position Inserting the Scanner in the Cradle CAUTION Do not pour, spray, or spill any liquid on the cradle. To insert the scanner in the cradle:
Insert the scanner top first. Push the handle until it clicks into place, engaging the contacts in the cradle and scanner. Wall Mount Template Sending Data to the Host Computer The cradle receives data from the scanner via a wireless radio connection and transmits it to the host computer via the host cable. The scanner and cradle must be paired for successful wireless communication. Pairing NOTE The pairing bar code that connects the scanner to a cradle is unique to each cradle. Do not scan data or parameters until pairing completes. Pairing registers a scanner to the cradle such that the scanner and cradle can exchange information. The FLB3678 operates in two modes: Point-to-Point and Multipoint-to-Point. In Point-to-Point mode, pair the linear imager scanner to the cradle either by inserting it in the cradle (if pair on contacts is enabled), or by scanning the pairing bar code. In Multipoint-to-
Point mode, you can pair up to seven scanners to one cradle. To pair the linear imager scanner with the cradle, scan a pairing bar code. A high-low-high-
low beep sequence followed by a low-high beep sequence indicates successful pairing and connection to the remote device. A long low, long high beep sequence indicates unsuccessful pairing. Lost Connection to Host If scanned data does not transmit to the cradles host, ensure that all cables are firmly inserted and the power supply is connected to an appropriate AC outlet, if applicable. If scanned data still does not transmit to the host, reestablish a connection with the host:
1. Disconnect the power supply from the cradle. 2. Disconnect the host interface cable from the cradle. 3. Wait three seconds. 4. Reconnect the host interface cable to the cradle. 5. Reconnect the power supply to the cradle, if required. 6. Reestablish pairing with the cradle by scanning the pairing bar code. Charging the Scanner Battery in the Cradle When using a new battery in the scanner, the battery requires a charge to be enabled. Insert the battery in the scanner and place the scanner in the FLB3678 cradle (see Inserting the Scanner in the Cradle). The battery begins charging when the scanner LED indicator starts flashing amber. The battery is fully charged when the cradle LED is solid green. A complete charge of a fully discharged battery can take up to three hours using external power and up to ten hours using the USB interface cable. Cradle LED Indicators LED Indication Power on Bluetooth connection established Page button Scanner page issued Green Green flashing Blue Amber (fast fast slow) Battery Indications Amber Blinking Amber fast blinking Green Troubleshooting If the cradle does not work after following the previous procedures:
Check the system power. Check for loose cable connections. Check that the scanner is inserted properly in the cradle. Check that the host settings are correct and the cradle is connected to the appropriate Charging Charging error Fully charged port on the host. 2.26"
[57.28mm]
1.13"
[28.64mm]
Pending Template Replacement 5.05"
[128.27mm]
Pending Template Replacement Dimension tolerance = 0.01 inch ( 0.25 mm) Draft 1_Reg Submission
1 2 | User Manual STB3678 | Users Manual | 2.10 MiB |
dangerous. degrees C. Use of alternative power supply will invalidate any approvals given to this unit and may be electrical ratings: Output 12Vdc, min 4.16A, with a maximum ambient temperature of at least 50 Use ONLY a Zebra approved UL LISTED ITE (IEC/EN 60950-1, LPS/SELV) power supply with Power Supply CAUTIONOperation of the device without regulatory approval is illegal. Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Note: Europe includes, Austria, Belgium, Bulgaria, Croatia,Czech Republic, Cyprus, Denmark, is available at: http://www.zebra.com/doc. Please refer to the Declaration of Conformity (DoC) for details of other country markings. This Korea, Australia, and Europe. are approved for use in the following countries: United States, Canada, Japan, China, South Regulatory markings, subject to certification, are applied to the device signifying the radio(s) is/
Wireless Device Country Approvals please visit https://www.bluetooth.org/tpg/listings.cfm. This is an approved Bluetooth product. For more information or to view End Product Listing, Bluetooth Wireless Technology may be obtained from http://www.zebra.com/doc. other relevant provisions of Directive 1995/5/EC and 2011/65/EU. A Declaration of Conformity Zebra hereby, declares that this device is in compliance with the essential requirements and Statement of Compliance Declared maximum operating temperature: 50oC. before connecting to an external power source. Do NOT attempt to charge damp/wet batteries. All components must be dry battery chargers. Only use Zebra approved and UL Listed accessories, battery packs and CAUTION the user's authority to operate the equipment. Any changes or modifications to Zebra equipment not expressly approved by Zebra could void Local language translations are available at the following website: http://www.zebra.com/doc. they are sold and will be labeled as required. All Zebra devices are designed to be compliant with the rules and regulations in the locations This guide applies to the following Model Number: STB3678 This device is approved under Zebra Technologies Corporation. Regulatory Information RF Exposure Guidelines Reducing RF Exposure Use Properly Only operate the device in accordance with the instructions supplied. The device complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices. For information on International human exposure to electromagnetic fields refer to the Zebra Declaration of Conformity (DoC) at http:www.zebra.com/doc. For further information on the safety of RF energy from wireless devices, see http://responsibility.zebra.com/index.php/downloads/, which is located under Wireless Communications and Health. Europe Remote and Standalone Antenna Configurations - To comply with EU RF exposure requirements, antennas that are mounted externally at remote locations or operating near users at stand-alone desktop of similar configurations must operate with a minimum separation distance of 20 cm from all persons. US and Canada To comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must not be co-located or operating in conjunction with any other transmitter/antenna except those already approved in this filling. Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. NOTE IMPORTANTE: (Pour l'utilisation de dispositifs mobiles) Dclaration d'exposition aux radiations:
Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Remote and Standalone Antenna Configurations To comply with FCC RF exposure requirements, antennas that are mounted externally at remote locations or operating near users at stand-alone desktop of similar configurations must operate with a minimum separation distance of 20 cm from all persons. Radio Frequency Interference Requirements-FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Radio Transmitters (Part 15) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radio Frequency Interference Requirements-Canada CAN ICES-3 (B)/NMB-3(B) Radio Transmitters - This device complies with Industry Canada's license-exempt RSS's. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment in an outlet on a circuit different from the receiver is connection Consult the dealer or an experienced radio/TV technician for help added to your vehicle. your vehicle. You should also consult the manufacturer about any equipment that has been vehicles (including safety systems). Check with the manufacturer or its representative regarding RF signals may affect improperly installed or inadequately shielded electronic systems in motor Vehicle Installation Improve work procedures. Provide a suitable working environment Provide adequate clearance Provide adjustable workstations Reduce or eliminate direct pressure Reduce or eliminate vibration Perform tasks at correct heights Keep objects that are used frequently within easy reach Reduce or eliminate excessive force Maintain a natural position Reduce or eliminate repetitive motion are adhering to your companys safety programs to prevent employee injury. recommendations below. Consult with your local Health & Safety Manager to ensure that you Caution: In order to avoid or minimize the potential risk of ergonomic injury follow the Recommendations Health and Safety RecommendationsErgonomic http://www.zebra.com Lincolnshire, IL USA Zebra Technologies Corporation 2015 ZIH Corp and/or its affiliates. All rights reserved. jurisdictions worldwide. All other trademarks are the property of their respective owners. Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many exists only for equipment, circuits, and subsystems contained in Zebra products. any Zebra Technologies Corporation, intellectual property rights. An implied license No license is granted, either expressly or by implication, estoppel, or otherwise under application or use of any product, circuit, or application described herein. Zebra does not assume any product liability arising out of, or in connection with, the reliability, function, or design. Zebra reserves the right to make changes to any software or product to improve 2015 Symbol Technologies, Inc. Cet appareil est conforme exempts de licence le flux RSS de Industrie Canada. Son fonctionnement est soumis aux deux conditions suivantes:
(1) Ce dispositif ne peut causer des interfrences; et (2) Cet appareil doit accepter toute interfrence, y compris les interfrences qui peuvent causer un mauvais fonctionnement de l'appareil. Radio Frequency Interference Requirements-Brazil For more information consult the website www.anatel.gov.br Declaraes Regulamentares para STB/FLB3678 - Brazil Nota: A marca de certificao se aplica ao Transceptor, modelo STB/FLB3678. Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Para maiores informaes sobre ANATEL consulte o site: www.anatel.gov.br Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Este produto est homologado pela Anatel, de acordo com os procedimentos regulamentados pela Resoluo n242/2000 e atende aos requisitos tcnicos aplicados, incluindo os limites de exposio da Taxa de Absoro Especfica referente a campos eltricos, magnticos e eletromagnticos de radiofrequncia, de acordo com as Resolues n 303/2002 e 533/2009. Este dispositivo est em conformidade com as diretrizes de exposio radiofrequncia quando posicionado pelo menos 20 centmetros de distncia do corpo. Para maiores informaes, consulte o site da Anatel. Chile Este equipo cumple con la Resolucin No 403 de 2008, de la Subsecretaria de telecomunicaciones, relativa a radiaciones electromagnticas. Ukraine Japan (VCCI) - Voluntary Control Council for Interference Class B ITE Taiwan Industrial Scanner Cradle Quick Reference Guide STB3678 CRADLE South Korea Korean Warning Statement for Class B ITE B
( )
(B )
, . China Thailand Marking and European Economic Area (EEA) Bluetooth Wireless Technology for use through the EEA have the following restrictions:
Maximum radiated transmit power of 100mW EIRP in the freq. range 2.400 -2.4835 GHz Warnings for Use of Wireless Devices Caution: Please observe all warning notices with regard to the usage of wireless devices. Potentially Hazardous Atmospheres - Vehicles Use You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants, etc. and areas where the air contains chemicals or particles such as grain, dust, or metal powders and any other area where you would normally be advised to turn off your vehicle engine. Safety in Hospitals Wireless devices transmit radio frequency energy and may affect medical electrical equipment. Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics or healthcare facilities. These requests are designed to prevent possible interference with sensitive medical equipment. Pacemakers Pacemaker manufacturers recommended that a minimum of 15cm (6 inches) be maintained between a hand-held wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with independent research and recommendations by Wireless Technology Research. Other Medical Devices Please consult your physician or the manufacturer of the medical device, to determine if the operation of your wireless product may interfere with the medical device. Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker when turned ON. Should not carry the device in a breast pocket. Should use the ear furthest from the pacemaker to minimize the potential for interference. If you have any reason to suspect that interference is taking place, turn OFF your device. Waste Electrical and Electronic Equipment (WEEE) Bulgarish: : Zebra
. , :http://
www.zebra.com/weee. MN002334A01 Revision Draft 3 - December 2015 2015 ZIH Corp and/or its affiliates. All rights reserved. jurisdictions worldwide. All other trademarks are the property of their respective owners. Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many http://www.zebra.com Lincolnshire, IL U.S.A. Zebra Technologies Corporation our website: http://www.zebra.com for the most updated warranty terms. queries, please call Zebra Technologies Corporation at +65 6858 0722. You may also visit rights and remedies you may have under the Australian Consumer Law. If you have any Zebra Technologies Corporation Australia's limited warranty above is in addition to any of acceptable quality and the failure does not amount to a major failure. damage. You are also entitled to have the goods repaired or replaced if the goods fail to be refund for a major failure and compensation for any other reasonably foreseeable loss or be excluded under the Australia Consumer Law. You are entitled to a replacement or
#05-02/03, Singapore 068895, Singapore. Our goods come with guarantees that cannot This warranty is given by Zebra Technologies Asia Pacific Pte. Ltd., 71 Robinson Road, For Australia Only:
http://www.zebra.com/warranty. For the complete Zebra hardware product warranty statement, go to:
Warranty For the latest version of this guide go to: http://www.zebra.com/support. Support at: http://www.zebra.com/support. Systems Support. If there is a problem with the equipment, they will contact Zebra If you have a problem using the equipment, contact your facilitys Technical or Service Information etina: Pro zkaznky z EU: Vechny produkty je nutn po skonen jejich ivotnosti vrtit spolenosti Zebra k recyklaci. Informace o zpsobu vrcen produktu najdete na webov strnce:
http://www.zebra.com/weee. Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til recirkulering, nr de er udtjent. Ls oplysningerne om returnering af produkter p: http://www.zebra.com/weee. Deutsch: Fr Kunden innerhalb der EU: Alle Produkte mssen am Ende ihrer Lebensdauer zum Recycling an Zebra zurckgesandt werden. Informationen zur Rcksendung von Produkten finden Sie unter http://
www.zebra.com/weee.
: ..: , , Zebra . , http://www.zebra.com/weee . Eesti: EL klientidele: kik tooted tuleb nende eluea lppedes tagastada taaskasutamise eesmrgil Zebra'ile. Lisainformatsiooni saamiseks toote tagastamise kohta klastage palun aadressi: http://www.zebra.com/weee. English: For EU Customers: All products at the end of their life must be returned to Zebra for recycling. For information on how to return product, please go to: http://www.zebra.com/weee. Espaol: Para clientes en la Unin Europea: todos los productos debern entregarse a Zebra al final de su ciclo de vida para que sean reciclados. Si desea ms informacin sobre cmo devolver un producto, visite:
http://www.zebra.com/weee. Franais: Clients de l'Union Europenne : Tous les produits en fin de cycle de vie doivent tre retourns Zebra pour recyclage. Pour de plus amples informations sur le retour de produits, consultez : http://www.zebra.com/weee. Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono essere restituiti a Zebra al fine di consentirne il riciclaggio. Per informazioni sulle modalit di restituzione, visitare il seguente sito Web: http://www.zebra.com/weee. Latvieu: ES klientiem: visi produkti pc to kalpoanas ma beigm ir jnogd atpaka Zebra otrreizjai prstrdei. Lai iegtu informciju par produktu nogdanu Zebra, ldzu, skatiet: http://www.zebra.com/weee. Lietuvi: ES vartotojams: visi gaminiai, pasibaigus j eksploatacijos laikui, turi bti grinti utilizuoti kompanij Zebra. Daugiau informacijos, kaip grinti gamin, rasite: http://www.zebra.com/weee. Magyar: Az EU-ban vsrlknak: Minden tnkrement termket a Zebra vllalathoz kell eljuttatni jrahasznosts cljbl. A termk visszajuttatsnak mdjval kapcsolatos tudnivalkrt ltogasson el a http://www.zebra.com/weee weboldalra. Malti: Gal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aar tal-ajja ta' l-uu taghom, iridu jiu rritornati gand Zebra gar-riikla. Gal aktar tagrif dwar kif gandek tirritorna l-prodott, jekk jogbok ur:
http://www.zebra.com/weee. Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar Zebra te worden teruggezonden voor recycling. Raadpleeg http://www.zebra.com/weee voor meer informatie over het terugzenden van producten. Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji naley zwrci do firmy Zebra w celu ich utylizacji. Informacje na temat zwrotu produktw znajduj si na stronie internetowej http://www.zebra.com/weee. Portugus: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos Zebra para reciclagem. Para obter informaes sobre como devolver o produto, visite: http://www.zebra.com/weee. Romnesc: Pentru clienii din UE: Toate produsele, la sfritul duratei lor de funcionare, trebuie returnate la Zebra pentru reciclare. Pentru informaii despre returnarea produsului, accesai: http://www.zebra.com/weee. Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku ivljenjske dobe vrniti podjetju Zebra za reciklao. Za informacije o vrailu izdelka obiite: http://www.zebra.com/weee. Slovenina: Pre zkaznkov z krajn EU: Vetky vrobky musia by po uplynut doby ich ivotnosti vrten spolonosti Zebra na recyklciu. Bliie informcie o vrten vrobkov njdete na:http://www.zebra.com/weee. Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrtettvksi Zebra-yhtin, kun tuotetta ei en kytet. Listietoja tuotteen palauttamisesta on osoitteessa http://www.zebra.com/weee. Svenska: Fr kunder inom EU: Alla produkter som uppntt sin livslngd mste returneras till Zebra fr tervinning. Information om hur du returnerar produkten finns p http://www.zebra.com/weee. Trke: AB Mterileri iin: Kullanm sresi dolan tm rnler geri dntrme iin Zebra'ya iade edilmelidir. rnlerin nasl iade edilecei hakknda bilgi iin ltfen u adresi ziyaret edin: http://www.zebra.com/weee. TURKISH WEEE Statement of Compliance Draft 3 Reg Submission Introduction The STB3678 cordless scanner cradle acts as charger and radio communication interface for the XX3678 cordless scanner. It can sit on a desktop or be mounted on a wall. The STB3678 cradle receives data from the scanner via a Bluetooth radio, and sends that data to the host through an attached cable. The cradle also charges the scanners internal battery pack when the scanner is inserted. The scanner can be charged from an external power supply or a powered host cable. This document provides basic instructions on setting up and using the cradle. Any discussion of transmission of information refers specifically to the STB3678 cradle. CAUTION LS3578 and DS3578 cordless scanners are incompatible with STB3678 cradles. Equipment Supplied The cradle package includes:
Cradle Four rubber feet (for desk mounting). Accessories The following equipment may be needed:
Three 1.5" #8 Philips head screws (for wall mounting, if applicable, not available from Zebra). Power supply for desk/wall mounting configuration. Save the shipping container for storing or shipping. Inspect all equipment for damage. If anything is damaged or missing, call an authorized Zebra Support Center immediately. Related Documentation LI3678 Product Reference Guide, p/n MN001740Axx. LI3678 Quick Start Guide, p/n MN002323Axx. FLB3678 Quick Reference Guide, p/n MN002336Axx. This documentation is available at: www.zebra.com/support. Cradle Parts Top View Canopy Latch PAIR Mounting Screw Hole Charging/
Communications Contacts Foot Latch Drain Hole Pairing Bar Code Drain Hole Mounting Screw Hole LED Page Button Mounting Screw Hole Bottom View Rubber Feet Host Cable Latch Host Cable (Under Latch) Rubber Feet Mounting Screw Hole Host Cable Guide Foot Latch Release Mounting Screw Hole Cradle Connections IMPORTANT Connect the interface cable and power supply (if necessary) in the following order to ensure proper operation of the scanner and cradle. Latch Host Port
(Under Latch) 1. Connect the appropriate cable to the power supply and an AC power source, if necessary. This will ensure detection of the host and prevent inadvertently back powering the cradle from improper detection of the host. Insert the interface cable into the host port. 2. 3. Lift the latch and connect the interface cable into the cradles host port, then close the latch. If applicable, thread the interface cable over the cable support hook and run the host and power cables into their respective cable grooves. 5. Pair the scanner to the cradle either by 4. 6. inserting it in the cradle (if Pair on Contacts is enabled) or by scanning the pairing bar code. If necessary, scan the appropriate host bar code (for non-autodetected interfaces). Refer to the Product Reference Guide. Changing the Host Interface To connect to a different host, or to the same host through a different cable:
1. Unplug the interface cable from the host. 2. Unplug the power supply from the cradle. 3. Connect the interface cable to the new host, or the new interface cable to the existing host. 4. Reconnect the power supply, if required. 5. If necessary, scan the appropriate host bar code (for non-autodetected interfaces). Refer to the Product Reference Guide. Using a Host Interface to Supply Power Some hosts can provide power to the cradle via the host interface, instead of an external power supply. CAUTION Always disconnect the DC power supply BEFORE disconnecting the cable to the host end or the cradle may not recognize the new host. Mounting the Cradle Horizontal Mount 1. Ensure the desk/wall mount 2. converter knob is in the correct position, shown at right. If mounting the cradle horizontally where no fastening is necessary, peel the protective paper from the back of the rubber feet included with the cradle packaging, and attach the feet to the cradle at the indentations in the plastic. These feet provide traction and prevent surface damage. Converter Knob Horizontal Position Vertical Mount NOTE Do not use the rubber feet when mounting in a vertical orientation. To mount the cradle on a vertical surface:
1. Use a Philips screwdriver to turn the desk/wall mount converter knob to the position shown below. The front latches protract to engage the depressions at the base of the scanners handle. 2. Attach the interface and power cables (see Cradle Connections). 3. Press the cables into the cable grooves. 4. Position the cradle on the mounting surface, or use the template included in this guide. 5. Mark the surface through the three holes on the bottom of the cradle, or use the mounting template to determine the location of the screw holes. 6. Pre-drill holes to accommodate three 1.5" #8 Philips head screws. 7. Attach the cradle securely to the surface. 8. Place the scanner in the cradle. Converter Knob Vertical Position Inserting the Scanner in the Cradle CAUTION Do not pour, spray, or spill any liquid on the cradle. To insert the scanner in the cradle:
Insert the scanner top first. Push the handle until it clicks into place, engaging the contacts in the cradle and scanner. Wall Mount Template Sending Data to the Host Computer The cradle receives data from the scanner via a wireless radio connection and transmits it to the host computer via the host cable. The scanner and cradle must be paired for successful wireless communication. Pairing NOTE The pairing bar code that connects the scanner to a cradle is unique to each cradle. Do not scan data or parameters until pairing completes. Pairing registers a scanner to the cradle such that the scanner and cradle can exchange information. The STB3678 operates in two modes: Point-to-Point and Multipoint-to-Point. In Point-to-Point mode, pair the scanner to the cradle either by inserting it in the cradle (if pair on contacts is enabled), or by scanning the pairing bar code. In Multipoint-to-Point mode, you can pair up to seven scanners to one cradle. To pair the scanner with the cradle, scan a pairing bar code. A high-low-high-low beep sequence followed by a low-high beep sequence indicates successful pairing and connection to the remote device. A long low, long high beep sequence indicates unsuccessful pairing. Lost Connection to Host If scanned data does not transmit to the cradles host, ensure that all cables are firmly inserted and the power supply is connected to an appropriate AC outlet, if applicable. If scanned data still does not transmit to the host, reestablish a connection with the host:
1. Disconnect the power supply from the cradle. 2. Disconnect the host interface cable from the cradle. 3. Wait three seconds. 4. Reconnect the host interface cable to the cradle. 5. Reconnect the power supply to the cradle, if required. 6. Reestablish pairing with the cradle by scanning the pairing bar code. Charging the Scanner Battery in the Cradle When using a new battery in the scanner, the battery requires a charge to be enabled. Insert the battery in the scanner and place the scanner in the STB3678 cradle (see Inserting the Scanner in the Cradle). The battery begins charging when the scanner LED indicator starts flashing amber. The battery is fully charged when the cradle LED is solid green. A complete charge of a fully discharged battery can take up to three hours using external power and up to ten hours using the USB interface cable. Cradle LED Indicators LED Indication Power on Bluetooth connection established Page button Scanner page issued Green Green flashing Blue Amber (fast fast slow) Battery Indications Amber Blinking Amber fast blinking Green Troubleshooting If the cradle does not work after following the previous procedures:
Check the system power. Check for loose cable connections. Check that the scanner is inserted properly in the cradle. Check that the host settings are correct and the cradle is connected to the appropriate Charging Charging error Fully charged port on the host. 2.26"
[57.28mm]
1.13"
[28.64mm]
Pending Template Replacement 5.05"
[128.27mm]
Pending Template Replacement Dimension tolerance = 0.01 inch ( 0.25 mm) Draft 3 Reg Submission
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2016-03-22 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
2 | 2402 ~ 2480 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2016-03-22
|
||||
1 2 | Applicant's complete, legal business name |
Zebra Technologies Corporation
|
||||
1 2 | FCC Registration Number (FRN) |
0015642663
|
||||
1 2 | Physical Address |
1 Zebra Plaza
|
||||
1 2 |
Holtsville, New York 11742
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
t******@timcoengr.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
UZ7
|
||||
1 2 | Equipment Product Code |
3678
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
L**** Z********
|
||||
1 2 | Title |
Regulatory Specialist
|
||||
1 2 | Telephone Number |
346-2********
|
||||
1 2 | Fax Number |
631-6********
|
||||
1 2 |
L******@zebra.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 09/17/2016 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 2 | DTS - Digital Transmission System | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Industrial Scanner Cradle | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | Yes | ||||
1 2 | Grant Comments | Power listed is conducted. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
SPORTON International Inc.
|
||||
1 2 | Name |
A**** C******
|
||||
1 2 | Telephone Number |
886-3******** Extension:
|
||||
1 2 | Fax Number |
886-3********
|
||||
1 2 |
a******@sporton.com.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0089000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0047000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC