FCC ID: UZ7BT000444 MC33 BLE Battery

MC3300ax Mobile Computer Quick Start Guide MN-004195-01EN Rev. A ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. 2021 Zebra Technologies Corporation and/or its affiliates. All rights reserved. Information in this document is subject to change without notice. The software described in this document is furnished under a license agreement or nondisclosure agreement. The software may be used or copied only in accordance with the terms of those agreements. For further information regarding legal and proprietary statements, please go to:

SOFTWARE:zebra.com/linkoslegal COPYRIGHTS:zebra.com/copyright WARRANTY:zebra.com/warranty END USER LICENSE AGREEMENT: zebra.com/eula Terms of Use Proprietary Statement Product Improvements Liability Disclaimer Limitation of Liability This manual contains proprietary information of Zebra Technologies Corporation and its subsidiaries

(Zebra Technologies). It is intended solely for the information and use of parties operating and maintaining the equipment described herein. Such proprietary information may not be used, reproduced, or disclosed to any other parties for any other purpose without the express, written permission of Zebra Technologies. Continuous improvement of products is a policy of Zebra Technologies. All specifications and designs are subject to change without notice. Zebra Technologies takes steps to ensure that its published Engineering specifications and manuals are correct; however, errors do occur. Zebra Technologies reserves the right to correct any such errors and disclaims liability resulting therefrom. In no event shall Zebra Technologies or anyone else involved in the creation, production, or delivery of the accompanying product (including hardware and software) be liable for any damages whatsoever

(including, without limitation, consequential damages including loss of business profits, business interruption, or loss of business information) arising out of the use of, the results of use of, or inability to use such product, even if Zebra Technologies has been advised of the possibility of such damages. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Publication Date June 8, 2021 2 MC3300ax Mobile Computer Quick Start Guide MC3300ax used in this guide refers to all configurations, except where noted. MC3300ax-G refers to the Trigger configuration. MC3300ax-S refers to the Straight configuration. Configurations MC3300ax-G Features Front View Figure 1 MC3300ax-G Front View

NOTE: The MC3300ax-G does not ship with a pre-installed hand strap. However, one can be purchased separately as a standalone accessory (SG-MC33-HDSTPG-01) if required. Number Item Function 1 2 3 4 5 6 7 8 Display Scan button Keypad Power key Displays all information needed to operate the device. Initiates data capture when a scan application is enabled. Use to enter data and navigate on screen functions. Press to suspend and resume device. Provides the following options:

Power off - Turn off the device. Restart - Reboot the device when software stops responding. Microphone Use for communications in Handset mode. Battery release latch Release the battery from the device. Trigger Initiates data capture when a scan application is enabled. Charge /Application notification LED or scan/decode status Indicates the battery charge state while charging, an application notification was received, or the scan/decode status.

3 MC3300ax Mobile Computer Quick Start Guide Back View Figure 2 MC3300ax-G Back View

Number Item Function 9 10 11 12 13 NFC antenna Provides communication with other NFC-enabled devices. Scanner exit window Provides data capture using integrated scanner/imager option. Speaker Battery Battery release latch Release the battery from the device. Provides power for operating the device. Provides audio output for video and music playback. 4 MC3300ax Mobile Computer Quick Start Guide MC3300ax-S Features Front View Figure 3 MC3300ax-S Front View

Number Item Function Display Displays all information needed to operate the device. Charge /Application notification LED or scan/decode status Indicates the battery charge state while charging, an application notification was received, or the scan/decode status. Side Key scan button Initiates data capture when a scan application is enabled. Battery release latch Release the battery from the device. Power key Press to suspend and resume device. Provides the following options:

Microphone Keypad Scan button Power off - Turn off the device. Restart - Reboot the device when software stops responding. Use for communications in Handset mode. Use to enter data and navigate on screen functions. Initiates data capture when a scan application is enabled. 1 2 3 4 5 6 7 8

5 MC3300ax Mobile Computer Quick Start Guide Back View Figure 4 MC3300ax-S Back View

Number Item Function Battery Camera/Flash NFC antenna Provides power for operating the device. Provides image capture capability with LED illumination. Provides communication with other NFC-enabled devices. Scanner exit window Provides data capture using the scanner. Speaker Provides audio output for video and music playback. Side key scan button Initiates data capture when a scan application is enabled. Battery release latch Release the battery from the device. Hand strap Use for securely holding the device. Comes pre-installed on every MC3300ax-S device. 9 10 11 12 13 14 15 16 Setup To start using the device for the first time:

Install a microSD card (optional) Install the battery Charge the device Power on the device.

6 MC3300ax Mobile Computer Quick Start Guide Installing a microSD Card The microSD card slot provides secondary non-volatile storage. The slot is located under the battery pack. Refer to the documentation provided with the card for more information, and follow the manufacturers recommendations for use. CAUTION: Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card. Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring that the operator is properly grounded. 1. Using a coin or finger, remove the microSD card cover. 2. Slide the microSD card holder to the Open position. 3. Lift the microSD card holder. 4. Place the microSD card into the contact area with the contacts facing down. 5. Close the microSD card holder and slide the microSD card holder to the Lock position. 6. Replace the microSD card cover and ensure that it is installed properly. 7 MC3300ax Mobile Computer Quick Start Guide Installing the MC3300ax-G Battery The device is shipped with the 7000 mAh PowerPrecision+ battery. The MC33 rechargeable Li-Ion battery with BLE beacon is available as an option. To install the battery:

1. Loosen the hand strap (if installed). 2. Align the battery into the battery compartment. 3. Slide the front of the battery into the battery compartment. 4. Press battery down firmly. Ensure that both battery release buttons on the sides of the MC3300ax-G return to the home position. 5. Tighten the hand strap (if installed). 6. Press and hold the Power key (until you see a Zebra splash screen) to turn on the device. 8 MC3300ax Mobile Computer Quick Start Guide Installing the MC3300ax-S Battery The device is shipped with the 7000 mAh PowerPrecision+ battery. The MC33 rechargeable Li-Ion battery with BLE beacon is available as an option. To install the battery:

1. Loosen the hand strap, if needed. 2. Align the battery into the battery compartment. 3. Slide the front of the battery into the battery compartment. 4. Press battery down firmly. Ensure that both battery release buttons on the sides of the MC3300ax-S return to the home position. 5. Tighten the hand strap, if needed. 6. Press and hold the Power key (until you see a Zebra splash screen) to turn on the device. 9 MC3300ax Mobile Computer Quick Start Guide Replacing the Battery in the MC3300ax-G 1. Push in the two Battery Release buttons. The battery ejects slightly. With Hot Swap mode, when the user removes the battery, the display turns off and the device enters low power state. The MC3300ax-G supports wireless connectivity persistence for 30 sec (indicated by flashing Amber LEDs), followed by RAM data persistence for approximately five minutes. Replace the battery within five minutes to preserve memory persistence. 2. Remove the battery from the battery compartment. 3. Align the battery into the battery compartment. 4. Slide the front of the battery into the battery compartment. 5. Press battery down firmly. Ensure that both battery release buttons on the sides of the MC3300ax-G return to the home position. 6. The device automatically resumes after a battery removal and installation (in a hot swap change). The only time the Power key needs to be pressed is if the device has been powered off or left for a prolonged duration without a battery pack. 10 MC3300ax Mobile Computer Quick Start Guide Replacing the Battery in the MC3300ax-S 1. Push in the two Battery Release buttons. The battery ejects slightly. With Hot Swap mode, when the user removes the battery, the display turns off and the device enters low power state. The MC3300ax-S supports wireless connectivity persistence for 30 sec (indicated by flashing Amber LEDs), followed by RAM data persistence for approximately five minutes. Replace the battery within five minutes to preserve memory persistence. 2. Remove the battery from the battery compartment. 3. Align the battery into the battery compartment. 4. Slide the front of the battery into the battery compartment. 5. Press battery down firmly. Ensure that both battery release buttons on the sides of the MC3300ax-S return to the home position. 6. The device automatically resumes after a battery removal and installation (in a hot swap change). The only time the Power key needs to be pressed is if the device has been powered off or left for a prolonged duration without a battery pack. 11 MC3300ax Mobile Computer Quick Start Guide MC33 Rechargeable Li-Ion Battery with BLE Beacon The MC33 rechargeable Li-Ion battery with BLE beacon is a 7000 mAh PowerPrecision+ battery with a BLE beacon that allows users to track lost and powered off devices. NOTE: The device is shipped with the 7000 mAh PowerPrecision+ battery. The MC33 rechargeable Li-Ion battery with BLE beacon is available as an option. IMPORTANT: The Secondary BLE beaconing functions only if the MC33 rechargeable Li-Ion battery with BLE beacon is in the device before the device is powered off. MC33 rechargeable Li-Ion battery with BLE beacon:

Has a Bluetooth logo. 1 Bluetooth Logo The Secondary BLE settings are controlled by the operating system of the device. For more information on configuring the Secondary BLE settings, go to:

techdocs.zebra.com/emdk-for-android/8-0/mx/beaconmgr/. IMPORTANT: Power on the device after installing the MC33 rechargeable Li-Ion battery with BLE beacon to ensure the operating system transfers the Secondary BLE settings to the battery. Transmits a Bluetooth signal (beacon) only when the device is powered off or in Airplane mode Must be in the device for the MC33 rechargeable Li-Ion battery with BLE beacon to transmit a signal

(disabled by default).

(beacon). Transmits a BLE signal for at least seven days after the device is powered off due to battery depletion. 1 12 MC3300ax Mobile Computer Quick Start Guide Battery Comparison Table 1 Battery Comparison The table below displays a comparison of the MC33 rechargeable Li-ion battery with BLE beacon, MC3300x, and MC33XX batteries. Feature MC33XX MC3300x MC33 Rechargeable Li-ion Battery with BLE Beacon Battery Type PowerPrecision+

PowerPrecision+

PowerPrecision+

Includes Zebra and PowerPrecision+

recessed logos Secondary BLE Beacon Back Label Yes No Blue Yes No Black Yes Yes Violet Battery Compatibility The following re-occurring message will be displayed if the incorrect battery is used with the MC3300ax device. Please make sure you use one of the MC3300ax compatible batteries. NOTE: The battery notification (shown above) cannot be disabled or suppressed on the MC3300ax handheld device. Please make sure you use the appropriate MC33 PP+ batteries with the MC3300ax device. 13 MC3300ax Mobile Computer Quick Start Guide Charging the MC3300ax Table 2 Charging and Communication Use one of the following accessories to charge the MC3300ax and/or spare battery. Description Part Number Charging Communication Battery

(In Device) Spare Battery USB Ethernet 1-Slot USB Charge Cradle with Spare Battery Charger CRD-MC33-2SUCHG-01 Yes 5-Slot Charge Only ShareCradle CRD-MC33-5SCHG-01 5-Slot Ethernet ShareCradle CRD-MC33-5SETH-01 5-Slot Charge ShareCradle with 4-Slot Battery Charger 5-Slot Ethernet ShareCradle with 4-Slot Battery Charger CRD-MC33-4SC4BC-01 CRD-MC33-4SE4BC-01 4-Slot Spare Battery Charger SAC-MC33-4SCHG-01 20-Slot Spare Battery Charger SAC-MC33-20SCHG-01 USB Charge Cable CBL-MC33-USBCHG-01 MC32N0 1-Slot Cradle with MC33XX Cradle Adapter CRD3000-1001RR ADP-MC33-CRDCUP-01 Yes Yes Yes Yes No No Yes Yes Yes No No No No No No Yes Yes No No Yes No Yes No No No No Yes No No Yes Yes Yes Yes No Yes

(Only charges MC32N0 batteries in the spare battery slot) Charging the Main Battery NOTE: Ensure that you follow the guidelines for battery safety described in the MC3300ax Product Reference Guide. NOTE: To function properly, ensure that the hand strap, if attached, does not interfere with the charging contacts when the device is inserted into a charging cradle. 1. To charge the main battery, connect the charging accessory to the appropriate power source. 2. Insert the device into a cradle or attach to a USB charge cable. The device turns on and begins charging. The Charging/Notification LED remains amber while charging, then turns solid green when fully charged. Charging the Spare Battery 1. Insert a spare battery into the spare battery slot. 2. Ensure the battery is seated properly. 14 The Spare Battery Charging LED blinks indicating charging. See Table 3 for charging indicators. MC3300ax Mobile Computer Quick Start Guide Charging Indicators Table 3 Charging/Notification LED Indicators State Indication Off The battery is not charging. The battery is not inserted correctly in the cradle or connected to a power source. Cradle is not powered. Blinking Amber Active wireless connectivity session during battery hot swap. Solid Amber Solid Green Fast Blinking Red 2 blinks/second Battery is charging. Battery charging is complete. Charging error, e.g.:

Temperature is too low or too high. Charging has gone on too long without completion (typically eight hours). Solid Red Spare battery is charging and battery is at the end of useful life. Charging complete and battery is at the end of useful life. Blinking Blue Indicates an application notification is received. Charging Temperature Charge batteries in temperatures from 0C to 40C (32F to 104F). The device or cradle always performs battery charging in a safe and intelligent manner. At higher temperatures (e.g. approximately +37C

(+98F)) the device or cradle may for small periods of time alternately enable and disable battery charging to keep the battery at acceptable temperatures. The device and cradle indicates when charging is disabled due to abnormal temperatures via its LED. Enterprise Browser NOTE: Zebra's Enterprise Browser is licensed to MC3300ax mobile computers. Enterprise Browser enables developers to build web applications that integrate seamlessly with the features in Zebra Technologies mobile computers and peripherals such as barcode scanning, signature capture, and printing. Installation To install Enterprise Browser:

1. Go to the Zebra Enterprise Browser Support web site at zebra.com/us/en/support-downloads/software/developer-tools/enterprise-browser.html or Google Play. 2. Download Enterprise Browser version 3.2.0.0 or higher. 3. Install Enterprise Browser on the device. For more information about installing Enterprise Browser, refer to the Application Deployment in the MC3300ax Mobile Computer Product Reference Guide. 4. To set up Enterprise Browser refer to techdocs.zebra.com/enterprise-browser/3-0/guide/setup/. 15 MC3300ax Mobile Computer Quick Start Guide 1-Slot USB Charge Cradle The 1-Slot USB Charge Cradle:

Provides 9 VDC power for charging the mobile computer and charging the battery. Provides 4.2 VDC power to charge the spare battery. Provides a USB port for data communication between the mobile computer and a host computer or other USB devices (e.g., a printer). Synchronizes information between the mobile computer and a host computer. With customized or third party software, it can also synchronize the mobile computer with corporate databases. Compatible with the following batteries (charging in a device):

MC3300ax 7000mAh PowerPrecision+ extended capacity battery MC3300x 7000mAh PowerPrecision+ extended capacity battery MC33XX 5200mAh PowerPrecision+ high capacity battery MC33XX 2740mAh PowerPrecision+ standard capacity battery (MC3300x-R/S & MC3300-R/S only). Compatible with the following batteries (charging in a spare battery slot only):

7000mAh PowerPrecision+ extended capacity battery MC33 7000mAh PowerPrecision+ extended capacity battery with a BLE beacon MC33XX 5200mAh PowerPrecision+ high capacity battery MC33XX 2740mAh PowerPrecision+ standard capacity battery. 16 MC3300ax Mobile Computer Quick Start Guide 5-Slot Charge Only ShareCradle The 5-Slot Charge Only ShareCradle:

Provides 9 VDC power for operating the mobile computer and charging the battery. Simultaneously charges up to five mobile computers. Compatible with the following batteries (charging in a device):

MC3300ax 7000mAh PowerPrecision+ extended capacity battery MC3300x 7000mAh PowerPrecision+ extended capacity battery MC33XX 5200mAh PowerPrecision+ high capacity battery MC33XX 2740mAh PowerPrecision+ standard capacity battery (MC3300x-R/S & MC3300-R/S only).

1 Power LED 17 MC3300ax Mobile Computer Quick Start Guide 5-Slot Ethernet ShareCradle The 5-Slot Ethernet ShareCradle:

Provides 9 VDC power for operating the mobile computer and charging the battery. Simultaneously charges up to five mobile computers. Compatible with the following batteries (charging in a device):

MC3300ax 7000mAh PowerPrecision+ extended capacity battery MC3300x 7000mAh PowerPrecision+ extended capacity battery MC33XX 5200mAh PowerPrecision+ high capacity battery MC33XX 2740mAh PowerPrecision+ standard capacity battery (MC3300x-R/S & MC3300-R/S only). 1 2 1000 LED 10/100 LED

18 MC3300ax Mobile Computer Quick Start Guide 5-Slot ShareCradle with 4-Slot Battery Charger The 5-Slot ShareCradle with 4-Slot Battery Charger:

Provides 9 VDC power for operating the mobile computer and charging the battery. Provides 4.2 VDC power for charging spare batteries. Simultaneously charges up to four mobile computers and four spare batteries. Compatible with the following batteries (charging in a device):

MC3300ax 7000mAh PowerPrecision+ extended capacity battery MC3300x 7000mAh PowerPrecision+ extended capacity battery MC33XX 5200mAh PowerPrecision+ high capacity battery MC33XX 2740mAh PowerPrecision+ standard capacity battery (MC3300x-R/S & MC3300-R/S only). Compatible with the following batteries (charging in a spare battery slot only):

7000mAh PowerPrecision+ extended capacity battery MC33 7000mAh PowerPrecision+ extended capacity battery with a BLE beacon MC33XX 5200mAh PowerPrecision+ high capacity battery MC33XX 2740mAh PowerPrecision+ standard capacity battery.

Charging slot Spare battery slot Power LED Spare battery charging LED 19

1 2 3 4 MC3300ax Mobile Computer Quick Start Guide 5-Slot Ethernet ShareCradle with 4-Slot Battery Charger The 5-Slot Ethernet ShareCradle with 4-Slot Battery Charger:

Provides 9 VDC power for operating the mobile computer and charging the battery. Provides 4.2 VDC power for charging spare batteries. Simultaneously charges up to four mobile computers and four spare batteries. Compatible with the following batteries (charging in a device):

MC3300ax 7000mAh PowerPrecision+ extended capacity battery MC3300x 7000mAh PowerPrecision+ extended capacity battery MC33XX 5200mAh PowerPrecision+ high capacity battery MC33XX 2740mAh PowerPrecision+ standard capacity battery (MC3300x-R/S & MC3300-R/S only). Compatible with the following batteries (charging in a spare battery slot only):

7000mAh PowerPrecision+ extended capacity battery MC33 7000mAh PowerPrecision+ extended capacity battery with a BLE beacon MC33XX 5200mAh PowerPrecision+ high capacity battery MC33XX 2740mAh PowerPrecision+ standard capacity battery.

1 2 3 4 5

Charging slot Spare battery slot 1000 LED 10/100 LED Spare battery charging LED 20 MC3300ax Mobile Computer Quick Start Guide 4-Slot Spare Battery Charger The 4-Slot Battery Charger:

Charges up to four spare batteries. Provides 4.2 VDC power to charge the spare battery. Compatible with the following batteries (charging in a spare battery slot only):

7000mAh PowerPrecision+ extended capacity battery MC33 7000mAh PowerPrecision+ extended capacity battery with a BLE beacon MC33XX 5200mAh PowerPrecision+ high capacity battery MC33XX 2740mAh PowerPrecision+ standard capacity battery. 1 2 Spare battery charging slot Power LED

21 MC3300ax Mobile Computer Quick Start Guide 20-Slot Spare Battery Charger The 20-Slot Battery Charger:

Charges up to twenty spare batteries. Provides 4.2 VDC power to charge the spare battery. Compatible with the following batteries (charging in a spare battery slot only):

7000mAh PowerPrecision+ extended capacity battery MC33 7000mAh PowerPrecision+ extended capacity battery with a BLE beacon MC33XX 5200mAh PowerPrecision+ high capacity battery MC33XX 2740mAh PowerPrecision+ standard capacity battery.

1 2 Spare battery charging slot Power LED

22 MC3300ax Mobile Computer Quick Start Guide USB Charge Cable The USB Charge Cable:

Provides 5 VDC power to charge the battery. Provides power and/or communication with the host computer over USB to the device. Compatible with devices using the following batteries:

MC3300ax 7000mAh PowerPrecision+ extended capacity battery MC3300x 7000mAh PowerPrecision+ extended capacity battery MC33XX 5200 mAh PowerPrecision+ high capacity battery MC33XX 2740 mAh PowerPrecision+ standard capacity battery (MC3300x-R/S & MC3300-R/S only). 23 MC3300ax Mobile Computer Quick Start Guide MC33XX Charge Only Adapter Use the MC33XX Charge Only Adapter for backwards compatibility with the MC32N0 cradles and the MC3300, MC3300x, or MC3300ax mobile computer. The MC33XX Charge Only Adapter is compatible with the MC3300, the MC3300x, and MC3300ax mobile computers for charge only (no communication) on the legacy MC32N0 1-Slot and 4-Slot cradles. MC33XX Charge Only Adapter supports the MC32N0 1-Slot USB Cradle, MC32N0 4-Slot Charge Only Cradle, and MC32N0 4-Slot Ethernet Cradle. MC33XX Charge Only Adapter provides charge only; no communication when used with the MC32N0 MC32N0 1-Slot USB Cradle provides 5.4 VDC to charge the device. MC32N0 1-Slot USB Cradle (with the MC33XX Charge Only Adapter) is compatible with an MC3300, MC3300x, or MC3300ax mobile computer charging the PowerPrecision+ batteries. MC33XX Charge Only Adapter Installation To install the MC33XX Charge Only Adapter:

1. Clean the MC32N0 cradle and contacts with an alcohol wipe, using a back and forth motion with your For more information about cleaning, refer to the Maintenance and Troubleshooting chapter of the MC3300ax Mobile Computer Product Reference Guide. cradles. finger. 2. Peel and remove the adhesive from the back of the adapter. 24 MC3300ax Mobile Computer Quick Start Guide 3. Insert the adapter into the MC32N0 cradle and adhere to the bottom of the cradle. 4. Insert the device into the MC32N0 cradle. 25 MC3300ax Mobile Computer Quick Start Guide Scanning The MC3300ax offers the following data capture options:

SE4770 1D/2D SE4850-ER 1D/2D Refer to the MC3300ax Mobile Computer Product Reference Guide for other scanning options. Scanning with Internal Imager Use the internal imager to capture barcode data. NOTE: To read a barcode, a scan-enabled app is required. The device contains the DataWedge app that allows the user to enable the imager, decode the barcode data, and display the barcode content. To scan with the internal imager:

1. Ensure that an app is open on the device and a text field is in focus (text cursor in text field). 2. Point the exit window on the top of the device at a barcode. 3. Press and hold the scan button or trigger. The red laser aiming pattern turns on to assist in aiming. 4. Ensure the barcode is within the area formed by the cross-hairs the aiming pattern. The aiming dot increases visibility in bright lighting conditions. Figure 5 Aiming Pattern: Standard and Extended Range NOTE: When the device is in Pick List Mode, the device does not decode the barcode until the center of the cross-hair touches the barcode. Figure 6 Pick List Mode with Multiple Barcodes in Aiming Pattern: Standard and Extended Range The Scan LEDs light green and a beep sounds, by default, to indicate the barcode was decoded successfully. 5. Release the scan button or Trigger. The barcode content data appears in the text field. 26 MC3300ax Mobile Computer Quick Start Guide Ergonomic Considerations Taking breaks and task rotation is recommended. Optimize Body Posture for Low Scanning Alternate left and right knees. Optimize Body Posture for High Scanning Alternate left and right hand. 27 MC3300ax Mobile Computer Quick Start Guide Avoid Bending Avoid Reaching Avoid Extreme Wrist Angles 28 zebra.com

MN-004193-01EN-Pa_mc33-ble-battery-rg-en-p.fm Page 1 MC33 Rechargeable Li-Ion Battery with BLE Beacon Regulatory Guide MN-004193-01EN-P 06/21 Zebra Technologies | 3 Overlook Point |

Lincolnshire, IL 60069 USA www.zebra.com ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. 2021 Zebra Technologies Corp. and/or its affiliates. All rights reserved. Warranty For the complete Zebra hardware product warranty statement, go to:

zebra.com/warranty. Service Information Before you use the unit, it must be configured to operate in your facility's network and run your applications. If you have a problem running your unit or using your equipment, contact your facility's Technical or System Support. If there is a problem with the equipment, they will contact Zebra support at zebra.com/support. For the latest version of the guide go to: zebra.com/support. Additional Information For information on using the MC33 BLE Battery, please go to zebra.com/support. Regulatory Information This device is approved under Zebra Technologies Corporation. This guide applies to the following model number: BT-000444 All Zebra devices are designed to be compliant with the rules and regulations in the locations they are sold and will be labeled as required. Local language translation /

Traduo do idioma local /

bersetzung in die lokale Sprache /

Raduccion de idioma local /

Traduction en langue locale /

Prijevod na lokalni jezik / Traduzione in lingua locale / /

/ Yerel dil eviri

/Tumaczenie na jzyk lokalny :

zebra.com/support Any changes or modifications to Zebra equipment not expressly approved by Zebra could void the users authority to operate the equipment. Declared maximum operating temperature: 50C For use only with Zebra approved and UL Listed mobile devices, Zebra approved, and UL Listed/Recognized battery packs. Bluetooth Wireless Technology This is an approved Bluetooth product. For more information on the Bluetooth SIG listing, please visit bluetooth.com. Regulatory Markings Regulatory markings subject to certification are applied to the device signifying the radio(s) is/are approved for use. Refer to the Declaration of Conformity (DoC) for details of other country markings. The DOC is available at:

zebra.com/doc. Safety in Hospitals and Aircraft NOTE: Wireless devices transmit radio frequency energy that may affect medical electrical equipment and aircrafts operation. Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics, healthcare facilities or by airline staff. These requests are designed to prevent possible interference with sensitive equipments. RF Exposure Guidelines Safety Information Reducing RF Exposure Use Properly Only operate the device in accordance with the instructions supplied. The device complies with internationally recognized standards covering human exposure to electromagnetic fields. For information on international human exposure to electromagnetic fields, refer to the Zebra Declaration of Conformity (DoC) at zebra.com/doc. For further information on the safety of RF energy from wireless devices, refer to RF exposure and assessment standards section at zebra.com/responsibility. Batteries and Power Packs This information applies to Zebra-approved batteries and power packs containing batteries. Battery Information CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of batteries according to instructions. Use only Zebra approved batteries. Accessories which have battery charging capability are approved for use with the following battery models:

Model BT-000444 (3.6 VDC, 7000 mAh) Zebra approved rechargeable battery packs are designed and constructed to the highest standards within the industry. However, there are limitations as to how long a battery can operate or be stored before needing replacement. Many factors affect the actual life cycle of a battery pack such as heat, cold, harsh environmental conditions, and severe drops. When batteries are stored over six months, some irreversible deterioration in overall battery quality may occur. Store batteries at half charge in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of metallic parts, and electrolyte leakage. When storing batteries for one year or longer, the charge level should be verified at least once a year and charged to half charge. Replace the battery when a significant loss of run time is detected. Standard warranty period for all Zebra batteries is one year, regardless if the battery was purchased separately or included as part of the host device. For more information on Zebra batteries, please visit:

zebra.com/batterydocumentation and select the Battery Best Practices link. Battery Safety Guidelines IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS WARNING When using this product basic safety precautions should always be followed, including the following:

The area in which the units are charged should be clear of debris and combustible materials or chemicals. Particular care should be taken where the device is charged in a non-commercial environment. Read all the instructions before using the product. Follow battery usage, storage, and charging guidelines found in the user's guide. Improper battery use may result in a fire, explosion, or other hazard. To charge the mobile device battery, the battery and charger temperatures must be between 0C and +40C (+32F and +104F). Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present a risk of fire, explosion, leakage, or other hazard. If you have any questions about the compatibility of a battery or a charger, contact Zebra support. Do not disassemble or open, crush, bend or deform, puncture, or shred. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury. Severe impact from dropping any battery-operated device on a hard surface could cause the battery to overheat. Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals. Do not modify, disassemble, or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water, rain, snow or other liquids, or expose to fire, explosion, or other hazard. Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle or near a radiator or other heat source. MN-004193-01EN-Pa_mc33-ble-battery-rg-en-p.fm Page 2 Do not place battery into a microwave oven or dryer. To reduce the risk of injury, close supervision is necessary when used near children. Please follow local regulations to promptly dispose of used re-chargeable batteries. Do not dispose of batteries in fire. Exposure to temperatures over 100C (212F) may cause explosion. Seek medical advice immediately if a battery has been swallowed. In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with large amounts of water and seek medical advice. If you suspect damage to your equipment or battery, contact Zebra support to arrange for inspection. Marking and European Economic Area

(EEA) Statement of Compliance Zebra hereby declares that this radio equipment is in compliance with Directives 2014/53/EU and 2011/65/EU. Any radio operation limitations within EEA countries are identified in Appendix A of EU Declaration of Conformity. The full text of the EU Declaration of Conformity is available at: zebra.com/doc. EU Importer: Zebra Technologies B.V Address: Mercurius 12, 8448 GX Heerenveen, Netherlands Waste Electrical and Electronic Equipment

(WEEE) For EU and UK Customers: For products at the end of their life, please refer to recycling/disposal advice at: zebra.com/weee. United States and Canada Regulatory Radio Frequency Interference Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.These limits are designed to provide reasonable protection against harmfulb interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Radio Frequency Interference Requirements Canada Innovation, Science and Economic Development Canada ICES-003 Compliance Label: CAN ICES-3

([B])/NMB-3([B]) This device complies with Innovation, Science and Economic Development Canadas licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radio lectrique subi mme si le brouillage est susceptible d'en compromettre le fonctionnement. RF Exposure Requirements - FCC and ISED The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated in compliance with the FCC RF emission guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of fcc.gov/oet/ea/fccid. zebra.com/support

(Parts)

) b P

) g H

) d C

) I V

r C

) B B P

) E D B P

X O O O O O O O O O O O O O O

(Metal Parts)

(Circuit Modules)

(Cables and Cable Assemblies)

(Plastic and Polymeric Parts)

(Optics and Optical Components)

(Batteries)

(Ext. Pwr Sply) SJ/T 11364 O:

O O O O O O O O O O O O O O O O O O O O SJ/T 11364--2014 O O O O O O O X:

SJ/T 11364--2014 (

(EAC) EAC. Mxico La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada.

9 13

(EPA) 15 TRK WEEE Uyumluluk Beyan EEE Ynetmeliine Uygundur. United Kingdom Statement of Compliance Zebra hereby declares that this radio equipment is in compliance with the Radio Equipment Regulations 2017 and the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. Any radio operation limitations within UK are identified in Appendix A of UK Declaration of Conformity. The full text of the UK Declaration of Conformity is available at:

zebra.com/doc. UK Importer: Zebra Technologies Europe Limited Address: Dukes Meadow, Millboard Rd, Bourne End, Buckinghamshire, SL8 5XF

Regulatory Engineering

Date: June 30, 2021

Federal Communications Commission

Office of Engineering and Technology

Equipment Authorization Division

7435 Oakland Mills Road

Columbia, MD 21046

Ref: FCC ID: UZ7BT000444

AUTHORIZATION LETTER

We, the undersigned, hereby authorize Jones Tsai in Sporton International Inc. to act on our behalf in all

manners relating to FCC application for equipment authorization, including signing of all documents

relating to these matters. Any and all acts carried out by Jones Tsai in Sporton International Inc. on our

behalf shall have the same effect as acts of our own.

If you have any acknowledgement and response, please send it to Sporton International Inc. directly.

Confidentiality Request

Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459),

we are requesting the Commission to withhold the following attachment(s) as confidential document

from public disclosure indefinitely.

 Schematic Diagram

 Block Diagram

 Part List

 Operational Description

 Tune-up Procedure

Above mentioned document contains detailed system and equipment description are considered as

proprietary information in operation of the equipment. The public disclosure of above documents might

be harmful to our company and would give competitor an unfair advantage in the market.

In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’

s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules

in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the

actual marketing of newly authorized devices. We are requesting the commission to grant short-term

confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public

Notice DA 04-1705.

 External Photos



Internal Photos

 Test Setup Photos

 User Manual

It is our understanding that all measurement test reports, FCC ID label format and correspondent during

certification review process cannot be granted as confidential documents and those information will be

available for public review once the grant of equipment authorization is issued.

Zebra Technologies Corporation

1 Z e b r a P l a z a , | H o l t s v i l l e , N Y 1 1 7 4 2 | 1 . 6 3 1 . 7 3 8 . 2 4 0 0 p h o n e | 1 . 6 3 1 . 6 2 7 . 7 1 7 9 f a x | w w w . z e b r a . c o m

Sincerely,

Signature

Regulatory Engineering

:

_______________________________

Name and Job Title.

E-mail

Tel.

: Larry (Qianlin) Zhou / Regulatory Specialist

: larry.zhou@zebra.com

: 346-260-3543

Zebra Technologies Corporation

1 Z e b r a P l a z a , | H o l t s v i l l e , N Y 1 1 7 4 2 | 1 . 6 3 1 . 7 3 8 . 2 4 0 0 p h o n e | 1 . 6 3 1 . 6 2 7 . 7 1 7 9 f a x | w w w . z e b r a . c o m