MK3100/3190 Quick Reference Guide Health and Safety Recommendations Ergonomic Recommendations Caution: In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your local Health & Safety Manager to ensure that you are adhering to your company's safety programs to prevent employee injury. Reduce or eliminate repetitive motion
Maintain a natural position
Reduce or eliminate excessive force
Keep objects that are used frequently within easy reach
Perform tasks at correct heights
Reduce or eliminate vibration
Reduce or eliminate direct pressure
Provide adjustable workstations
Provide adequate clearance
Provide a suitable working environment
Improve work procedures. Regulatory Information This device is approved under Motorola Solutions, Inc. This guide applies to the following Model Numbers: MK3100, MK3190 All wireless information only applies to MK3190. All Motorola devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Local language translations are available at the following website:
http://www.motorolasolutions.com/support Any changes or modifications to Motorola equipment, not expressly approved by Motorola, could void the user's authority to operate the equipment. Only use Motorola approved and UL Listed accessories. Declared maximum operating temperature: 40C. Radio Modules The device contains an approved radio module. The module is identified below. Motorola 21-148603-0B RLAN & BT. Les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux
(c.--d., qu'ils ont la priorit) pour les bands 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. 2.4 GHz Only The available channels for 802.11 b/g operation in the US are Channels 1 to 11. The range of channels is limited by firmware. Warnings for Use of Wireless Devices Please observe all warning notices with regard to the usage of wireless devices. Potentially Hazardous Atmospheres - Vehicles Use You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants etc. and areas where the air contains chemicals or particles
(such as grain, dust, or metal powders) and any other area where you would normally be advised to turn off your vehicle engine. Potentially Hazardous Atmospheres - Fixed Installations You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants etc. and areas where the air contains chemicals or particles
(such as grain, dust, or metal powders). Safety in Aircraft Switch off your wireless device whenever you are instructed to do so by airport or airline staff. If your device offers a 'flight mode' or similar feature, consult airline staff as to its use in flight. Safety in Hospitals Wireless devices transmit radio frequency energy and may affect medical electrical equipment. Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics or healthcare facilities. These requests are designed to prevent possible interference with sensitive medical equipment. Pacemakers Pacemaker manufacturers recommended that a minimum of 15cm (6 inches) be maintained between a handheld wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with independent research and recommendations by Wireless Technology Research. LED Devices Invisible and Visible LED Light, Class 1 LED Product COMPLIES WITH IEC 60825-1:2001 (Ed.1.2) & IEC 62471:2006 (Ed.1.0);
EN 62471:2008. LED LIGHT DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS CLASS 1M LED PRODUCT. LED LICHT SEHEN SIE NICHT DIREKT MIT OPTISCHEN INSTRUMENTEN BETRACHTEN LED CLASSE 1M. LUMIERE LED - NE PAS REGARDER DIRECTEMENT AVEC LES INSTRUMENTS OPTIQUES. APPAREIL A LED DE CLASSE 1M.
Imager Labeling CAUTION- CLASS 2 LASER, 1M LED LIGHT WHEN OPEN. DO NOT STARE INTO BEAM OR VIEW WITH OPTICAL INSTRUMENTS. ATTENTION- LUMIRE LASER DE CLASSE 2 EN CAS D'OUVERTURE. NE PAS REGARDER DANS LE FAISCEAU. VORSICHT- LASERLICHT KLASSE 2, WENN ABDECKUNG GEFFNET. NICHT IN DEN STRAHL BLICKEN.
LED light is emitted from this aperture:
2012 Motorola Solutions, Inc. All rights reserved. Motorola reserves the right to make changes to any product to improve reliability, function, or design. Motorola does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, apparatus, machine, material, method, or process in which Motorola products might be used. An implied license exists only for equipment, circuits, and subsystems contained in Motorola products. MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. Motorola Solutions, Inc. One Motorola Plaza Holtsville, N.Y. 11742-1300 http://www.motorolasolutions.com Motorola Solutions, Inc. One Motorola Plaza Holtsville, New York 11742, USA 1-800-927-9626 http://www.motorolasolutions.com MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. 2012 Motorola Solutions, Inc. All rights reserved. 72-167095-01 Revision .4 October 2012 Wireless Device Country Approvals Operation of the device without regulatory approval is illegal. Regulatory markings, subject to certification, are applied to the device signifying the radio(s) is/are approved for use in the following countries: United States, Canada, Japan, China, S. Korea, Australia, and Europe1. Please refer to the Declaration of Conformity (DoC) for details of other country markings. This is available at http://www.motorola.com/doc Note1: For 2.4GHz or 5GHz Products: Europe includes, Austria, Belgium, Bulgaria, Czech Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Country Roaming This device incorporates the International Roaming feature (IEEE802.11d) which will ensure the product operates on the correct channels for the particular country of use. Ad-Hoc Operation (5 GHz band) Ad-Hoc operation is limited to Channels 36-48 (5150-5250 MHz). Use of this band is restricted to Indoor Use Only, any other use will make the operation of this device illegal. Frequency of Operation - FCC and IC 5 GHz Only The use in the UNII (Unlicensed National Information Infrastructure) band 1 (5150-5250 MHz) is restricted to Indoor Use Only; any other use will make the operation of this device illegal. Industry Canada Statement:
Caution: The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-Channel mobile satellite systems. High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-
LAN devices. Avertissement: Le dispositive fonctionnant dans la bande 5150-5250 MHz est rserv uniquement pour une utilisation l'intrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. Persons with pacemakers:
Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker
Should not carry the device in a breast pocket.
Should use the ear furthest from the pacemaker to minimise the potential for
If you have any reason to suspect that interference is taking place, turn OFF your when turned ON. interference. device. Other Medical Devices Please consult your physician or the manufacturer of the medical device, to determine if the operation of your wireless product may interfere with the medical device. RF Exposure Guidelines Safety Information Reducing RF Exposure - Use Properly Only operate the device in accordance with the instructions supplied. International The device complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices. For information on "International"
human exposure to electromagnetic fields refer to the Motorola Declaration of Conformity (DoC) at http://www.motorola.com/doc. Europe To satisfy EU RF exposure requirements, a mobile transmitting device must operate with a minimum separation distance of 20 cm or more from a person's body. Co-located statement To comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must not be co-located or operating in conjunction with any other transmitter/
antenna except those already approved in this filling. Remote and Standalone Antenna Configurations To comply with FCC RF exposure requirements, antennas that are mounted externally at remote locations or operating near users at stand-alone desktop of similar configurations must operate with a minimum separation distance of 20 cm from all persons. Power Supply This device must be powered from an 802.3af or 802.3at compliant power source which has been certified by the appropriate agencies, or by a LISTED Motorola, Type no. PWRS-14000 (12Vdc, 4.16A) direct plug-in power supply, marked Class 2 or LPS
(IEC60950-1, SELV). Use of alternative Power Supply will invalidate any approvals given to this unit and may be dangerous. Radio Frequency Interference Requirements-FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help. Radio Transmitters (Part 15) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The use of 5 GHz WLAN's, for use in the U.S., has the following restrictions:
Notched Band 5.60 - 5.65 GHz Radio Frequency Interference Requirements - Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Radio Transmitters For RLAN Devices:
The use of 5 GHz RLAN's, for use in Canada, have the following restrictions:
Restricted Band 5.60 - 5.65 GHz This device complies with RSS 210 of Industry & Science Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and
(2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Label Marking: The Term "IC:" before the radio certification only signifies that Industry Canada technical specifications were met. CE Marking and European Economic Area (EEA) The use of 2.4GHz RLAN's, for use through the EEA, have the following restrictions:
Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 -
2.4835 GHz
France, outside usage is restricted to 2.4 - 2.454 GHz.
Italy requires a user license for outside usage. Statement of Compliance for MK3190 Motorola/Symbol hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A Declaration of Conformity may be obtained from http://www.motorola.com/doc Statement of Compliance for MK3100 Motorola/Symbol hereby declares that this device is in compliance with all the applicable Directives, 2004/108/EC and 2006/95/EC. A Declaration of Conformity may be obtained from http://www.motorola.com/doc Chile
"Este equipo cumple con la Resolucin No 403 de 2008, de la Subsecretaria de telecomunicaciones, relativa a radiaciones electromagnticas.". China Mexico Restrict Frequency Range to: 2.450 - 2.4835 GHz. S. Korea For a radio equipment using 2400~2483.5MHz or 5725~5825MHz, the following two expressions should be displayed.
Taiwan
Magyar: Az EU-ban vsrlknak: Minden tnkrement termket a Motorola vllalathoz kell eljuttatni jrahasznosts cljbl. A termk visszajuttatsnak mdjval kapcsolatos tudnivalkrt ltogasson el a http://www.motorola.com/recycling/weee weboldalra. Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar Motorola te worden teruggezonden voor recycling. Raadpleeg http://www.motorola.com/recycling/weee voor meer informatie over het terugzenden van producten. Portugus: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos Motorola para reciclagem. Para obter informaes sobre como devolver o produto, visite:
http://www.motorola.com/recycling/weee. Romnesc: Pentru clienii din UE: Toate produsele, la sfritul duratei lor de funcionare, trebuie returnate la Motorola pentru reciclare. Pentru informaii despre returnarea produsului, accesai: http://www.motorola.com/recycling/weee. Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku ivljenjske dobe vrniti podjetju Motorola za reciklao. Za informacije o vrailu izdelka obiite:
http://www.motorola.com/recycling/weee. Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrtettvksi Motorola-yhtin, kun tuotetta ei en kytet. Listietoja tuotteen palauttamisesta on osoitteessa http://www.motorola.com/recycling/weee. Svenska: Fr kunder inom EU: Alla produkter som uppntt sin livslngd mste returneras till Motorola fr tervinning. Information om hur du returnerar produkten finns p http://www.motorola.com/recycling/weee. Trke: AB Mterileri iin: Kullanm sresi dolan tm rnler geri dntrme iin Motorola'ya iade edilmelidir. rnlerin nasl ltfen u adresi ziyaret edin:
iade edilecei hakknda bilgi iin Japan (VCCI) - Voluntary Control Council for Interference Class B ITE Waste Electrical and Electronic Equipment (WEEE) English: For EU Customers: All products at the end of their life must be returned to Motorola for recycling. For information on how to return product, please go to:
http://www.motorola.com/recycling/weee.
: :
Motorola .
, : http://www.motorola.com/recycling/weee. Dansk: Til kunder i EU: Alle produkter skal returneres til Motorola til recirkulering, nr de er udtjent. Ls oplysningerne om returnering af produkter p:
http://www.motorola.com/recycling/weee. Deutsch: Fr Kunden innerhalb der EU: Alle Produkte mssen am Ende ihrer Lebensdauer zum Recycling an Motorola zurckgesandt werden. Informationen zur Rcksendung von Produkten finden Sie unter http://www.motorola.com/recycling/weee. Eesti: EL klientidele: kik tooted tuleb nende eluea lppedes tagastada taaskasutamise eesmrgil Motorola'ile. Lisainformatsiooni saamiseks toote tagastamise kohta klastage palun aadressi: http://www.motorola.com/recycling/weee. Espaol: Para clientes en la Unin Europea: todos los productos debern entregarse a Motorola al final de su ciclo de vida para que sean reciclados. Si desea ms informacin sobre cmo devolver un producto, visite: http://www.motorola.com/recycling/weee.
Franais : Clients de l'Union Europenne : Tous les produits en fin de cycle de vie doivent tre retourns Motorola pour recyclage. Pour de plus amples informations sur le retour de produits, consultez : http://www.motorola.com/recycling/weee. Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono essere restituiti a Motorola al fine di consentirne il riciclaggio. Per informazioni sulle modalit di restituzione, visitare il seguente sito Web:
http://www.motorola.com/recycling/weee. Korea Warning Statement for Class B ITE Other Countries Ukraine This equipment corresponds to requirements of the Technical Regulation No. 1057, 2008 on restrictions as to the use of some dangerous substances in electric and electronic devices. Australia Use of 5GHz RLAN's in Australia is restricted in the following band 5.50 - 5.65GHz. Brazil Regulatory declarations for MK3190 - BRAZIL Declaraes Regulamentares para MK3190 - BRAZIL Nota: "A marca de certificao se aplica ao Transceptor, modelo MK3190. Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio."
Para maiores informaes sobre ANATEL consulte o site: www.anatel.gov.br Unpacking Remove the MK3100/3190 from its packing and inspect it for damage. Keep the packing, it is the approved shipping container and should be used if the device needs to be returned for servicing. MK3100/3190 Parts Microphone Touch Screen / LCD Function Buttons Speakers Scanner Window Back View Mounting Hole (4) Cable Run Mini-USB Host/
Client Port Mini-USB Host Ports (2) Headset Jack MicroSD Card Slot Cable Run Cable Run Power RJ45 (Ethernet) Reset Button Ferrite Core Placement You must place a ferrite core (Motorola p/n 34.10P16.001) on the Ethernet cable as follows:
1. Open the ferrite core and place it on the cable. 2. Route the cable outside the ferrite core once and then close the ferrite core. Note:
Supports standard 10/100Mbps Ethernet network.
Use Motorola approved Mini-USB cable (optional). Mounting Use a standard VESA mount to mount the device:
1. Select a VESA mount that conforms to the 100 mm VESA specification. 2. The devices mounting inserts are M4 x 8.1 mm. When selecting an appropriate screw type, ensure its length does not penetrate the devices back housing more than 8.1 mm after going through the mounting plate. Insert the screws through each of the four aligned mounting holes. 3. Align the VESA mounting holes with the mounting holes on the back of the device. 4. Service Information If you have a problem using the equipment, contact your facilitys technical or systems support. If there is a problem with the equipment, they will contact the Motorola Solutions Global Customer Support Center at:
http://www.motorolasolutions.com/support. For the latest version of this guide go to: http://www.motorolasolutions.com/support Warranty For the complete Motorola hardware product warranty statement, go to:
http://www.motorola.com/enterprisemobility/warranty For Australia Only:
This warranty is given by Motorola Solutions Australia Pty Limited (ABN16 004 742 312) of Tally Ho Business Park, 10 Wesley Court. Burwood East, Victoria. Our goods come with guarantees that cannot be excluded under the Australia Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Motorola Solutions Australias limited warranty above is in addition to any rights and remedies you may have under the Australian Consumer Law. If you have any queries, please call Motorola Solutions Australia at 1800 457 439. You may also visit our website:
http://www.motorola.com/Business/XA-EN/Pages/Contact_Us for the most updated warranty terms.