FCC ID: UZ7LEX700 MISSION CRITICAL HANDHELD

700 Quick Start Guide.fm Page 1 Thursday, May 31, 2012 1:20 PM LEX 700 MISSION CRITICAL HANDHELD QUICK START GUIDE Draft, 31 May, 2012 700 Quick Start Guide.fm Page 2 Thursday, May 31, 2012 1:20 PM 2012 Motorola Solutions, Inc. All rights reserved. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from Motorola. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice. The software is provided strictly on an as is basis. All software, including firmware, furnished to the user is on a licensed basis. Motorola grants to the user a non-transferable and non-exclusive license to use each software or firmware program delivered hereunder (licensed program). Except as noted below, such license may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of Motorola. No right to copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with other program material, create a derivative work from a licensed program, or use a licensed program in a network without written permission from Motorola. The user agrees to maintain Motorolas copyright notice on the licensed programs delivered hereunder, and to include the same on any authorized copies it makes, in whole or in part. The user agrees not to decompile, disassemble, decode, or reverse engineer any licensed program delivered to the user or any portion thereof. Motorola reserves the right to make changes to any software or product to improve reliability, function, or design. Motorola does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any Motorola Solutions, Inc., intellectual property rights. An implied license only exists for equipment, circuits, and subsystems contained in Motorola products. 2 700 Quick Start Guide.fm Page 3 Thursday, May 31, 2012 1:20 PM LEX 700 Notification LED (page 11) Charge LED (page 11) Battery Cover (page 5) Battery Cover Latch Interface Connector Proximity Sensors Ambient Light Sensor Quick Action Request Button

(page 17) Touch Screen Secondary Microphone Earpiece B Power Button

(page 9) PTT Button

(page 15) Volume Buttons (page 13) Camera Button*

(page 16) microUSB Port (page 8) Radio Remote Control Pairing Point (page 17) Back/Ok Button Camera Lens and Flash (page 16) Programmable Button* (page 9) Speaker (page 14) Phone Button (page 14) Headset Port Home Button (page 9) Primary Microphone

* This programmable button can be customized by your agency for other use. 3 700 Quick Start Guide.fm Page 4 Thursday, May 31, 2012 1:20 PM Welcome Greetings upon receiving your LEX 700 Mission Critical Handheld device. This state-of-the-art Windows Mobile 6.5 based device delivers many features and benefits in a mission critical environment, enabling enhanced communication on the move. Meet the LEX 700 The LEX 700 combines high-speed LTE data and phone services, in a rugged and intuitive device which helps to monitor the environment, and gather information effectively. With the LEX 700, mission critical data can be brought to the field on demand, while field information is immediately available back at the command center. The LEX 700 operates over Band 14 (Public Safety) LTE, Band 13 (Verizon Wireless) LTE, 3G cellular, Wi-Fi and uses Bluetooth and Mission Critical Wireless technology to create personal area networks. The LEX 700 can be used to remotely change volume and channels on an APX 7000 radio, without reaching for the radio. Push-To-Talk and Quick Action buttons can be used to notify a dispatcher or command staff that the user needs assistance. The device provides secure data exchange as a user roams across private and public networks, with a mobile VPN connection. The device has a 4-inch, high-resolution, capacitive touch screen that enables the user to easily read maps and blueprints and to watch vibrant video. Noise-canceling technology is used to capture clear audio from the incident scene and the 8 megapixel camera is capable of recording DVD-quality video. For detailed information on the LEX 700 features and operation, refer to the LEX 700 Users Guide p/n 6802988C27 at: motorolasolutions.com/LEX700. BEFORE USING THIS device, READ the Product Regulatory, Safety & RF Exposure Guide (p/n 6802988C25) included with this package. 4 700 Quick Start Guide.fm Page 5 Thursday, May 31, 2012 1:20 PM Getting Started for the First Time The activation process is dependent upon your carrier. If you are using a LTE carrier, you must install a SIM card prior to installing the battery. To get started, perform the following steps:

Remove the battery cover. Install the microSD card (optional). Install the LTE SIM card. Install the battery. Charge the battery. Remove the Battery Cover To remove the battery cover:

1. Hold the LEX 700 firmly as shown. 2. Move the Battery Cover Latch to the right and hold. 3. With your thumb, push the battery cover toward the lower side of the LEX 700. 4. Lift the battery cover off the LEX 700. Battery Cover Latch A B 1 2 5 700 Quick Start Guide.fm Page 6 Thursday, May 31, 2012 1:20 PM Install a microSD Card (Optional) 1. Slide the microSD Card Holder to Open. microSD Card Holder Location Open 1 2 Install a SIM Card 1. Slide the SIM Card Holder to Open. 2. Open the SIM Card Holder. 3. Slide the SIM Card onto the SIM Card Holder with the contacts facing down. Note the Card Notch position. 2. Lift the microSD Card Holder. 3. Place the microSD card onto the holder with contacts facing down and ensure that the SIM card is fully seated and flat. 4 3 5 Lock 4. Close the microSD Card Holder. 5. Slide the microSD Card Holder to Lock. 6 SIM Card Holder Location 1 Open 2 4. Close the SIM Card Holder and ensure that the SIM card is fully seated and flat. 5. Slide the SIM Card Holder to Lock. 4 Card Notch 3 5 Lock 700 Quick Start Guide.fm Page 7 Thursday, May 31, 2012 1:20 PM Install the Battery 1. Remove the battery from the packaging. 2. Locate the Battery Contacts. 3. Insert the battery into the battery compartment with the Battery Contacts facing down. 4. Press the top of battery into place. 5. Slide the Battery Lock Latch up to secure the battery. 6. Replace the battery cover - the LEX 700 starts. NOTE: The LEX 700 will not charge until the battery cover is locked in place. Remove the Battery To remove the battery:

1. Remove the Battery Cover (see page 5). 2. Slide the Battery Lock Latch down to unlock the battery. 3. With the tip of your finger, lift up the battery from the side closest to the lower side of the LEX 700. Battery Contacts Side 1 B A B A Battery Lock Latch Lock 2 Unlock 3 7 Plug Head USB Charger USB Cable 700 Quick Start Guide.fm Page 8 Thursday, May 31, 2012 1:20 PM Charge the Battery To charge the battery:

1. Install the plug head into the USB Charger. 2. Plug the supplied USB Cable into the rectangu-

lar slot in the USB Charger. 3. Plug the USB Charger into an AC wall outlet. 4. Lift the rubber flap that covers the USB port on the side of the LEX 700. 5. Plug the microUSB connector into the USB port. 6. The Charge LED slowly blinks amber, indicating that the battery is charging. When the battery is fully charged, the LED becomes solid green. NOTE: For charging indications, see page 11. Charge LED B 8 700 Quick Start Guide.fm Page 9 Thursday, May 31, 2012 1:20 PM The Keys Power On/Off and Suspend Home Phone Programmable Button Back/OK Home: Press briefly to minimize all active appli-

cations and return to the Home screen. Phone: Press to launch the phone dialer screen with the last called contact in the dialer. Programmable Button: This programmable but-

ton is customized by your agency for a specific use. Contact your system administrator for details. Back/OK: Press to return to the previous screen. In a Windows message, press to send a mes-

sage. In the Home Screen, press briefly to flip cards. Power Button B Use the Power button for the following operations:

Power Off To power off:

1. Press and hold the Power button for at least two seconds. 2. When the dialog box appears, tap Power Off. Power On To power on:

Press and hold the Power button for at least two seconds. Suspend To toggle between Suspend and On:

Press and release the Power button. 9 700 Quick Start Guide.fm Page 10 Thursday, May 31, 2012 1:20 PM Lock/Unlock the LEX 700 Lock the device to protect your information and to prevent unwanted key presses. You can set the Lock to access the device with or without a password. To lock the LEX 700:

1. Press the Power but-

ton for at least two sec-

onds. 2. Select Lock. When the LEX 700 is locked, you will still be notified of new mes-

sages, missed calls and incidents. To unlock the LEX 700:

Swipe your finger across the screen from left to right. NOTE: A PIN may also be required to unlock your device. 10 Covert Mode In Covert mode, all audio is routed to your headset. Sound, vibrating, LED indications and the screen remain off. The display is blacked out, the touch screen is disabled. To enter Covert mode:

1. Press and hold the Power button for at least two seconds. 2. When the dialog box appears, tap Covert. You can also slide your finger on the Home screen to the Mode card and tap Covert. To exit Covert mode:

1. Press and hold the Power button for at least three seconds and release. 2. Select Exit Covert Mode. 700 Quick Start Guide.fm Page 11 Thursday, May 31, 2012 1:20 PM LED Indicators Notification LED Charge LED Charge LED Indications State Description B Off Notification LED Indications State Description Solid Green New notification (Voice mail, Text Solid Red Amber message, Alarm etc.) Low battery power Incident notification Battery is not charging. Could indicate that:

The LEX 700 is not connected correctly to the cable of the USB Charger. The USB Charger is not powered. Damaged Battery Fully Charged Damaged Battery Could indicate that:

The temperature is too low or too high. Charging has gone on too long without com-

pletion. 11 Slow Blinking Amber Charging Slow Blinking Red Solid Green Solid Red Fast Blinking Amber 700 Quick Start Guide.fm Page 12 Thursday, May 31, 2012 1:20 PM The Home Screen The default Home screen contains five customizable content cards to allow quick access to information. Flick left or right to view cards. Simple Messaging Device Mode Full Messaging Weather Change My Status Full Messaging Card: View detailed communi-

cation activity. Simple Messaging Card: View summarized communication activity. Device Mode Card: Set the LEX 700 to Covert or Vibrate mode. Weather Card: View weather forecast. Change My Status Card: Change availability. 12 Tap the bar to open/close the Device Management window Status Bar Tap to Change My Status Branding Banner/PTT Info Home Screen Setup Missed Calls Voicemail SMS/MMS Active Tasks Tap to Launch Applications PTT Volume Level Slide left to toggle low/last used volume Level Configure Card In Call Status Bar Current Day Agency Email Personal Email Active Alarm Tile Bar*

Tap to Open Contacts List

* The Application Shortcuts Tile Bar provides quick access to applications. To change a favorite application, press and hold on the Application Shortcuts Bar > tap to remove icon > tap on new icon to select > tap Save.

700 Quick Start Guide.fm Page 13 Thursday, May 31, 2012 1:20 PM Basic Operations Change the Ring Volume When not in a call, press the Up/Down Volume buttons. Change the Call Volume During a call, press the Up/Down Volume buttons. Use the Keypad To use the on-screen QWERTY keypad, tap or on a text entry field. The keypad pops up from the lower side of the screen. To insert an upper case letter: tap

. To use the numberpad: press and hold

. To insert numbers and use punctuation: tap

. To insert symbols: from the numbers and punctu-

ation keypad, tap To change the keypad and dictionary, word Sug-

gestion and Auto- Correction settings: press and hold

!123

!123 sym Tab

. Application Launcher From the lower side of the Home screen, tap APP Launcher to open the All Applications window. Slide the window up and down to view more applications. Tap an icon to open an application. Device Management To enter the Device Management screens:

1. Tap the Status bar. 2. Slide your finger right/left across the tabs and tap an item to view specific information:

Manage my status. View battery level, turn on/off radios, change to Covert and Silent modes. View/close running applications. Connect and manage Wireless Local Area Networks (WLAN) Windows Mobile notification messages. 3. To exit, tap the Status bar. 13 700 Quick Start Guide.fm Page 14 Thursday, May 31, 2012 1:20 PM Phone Call Make a call 1. Press key or tap on the Home screen. 2. Use the dialpad to enter the phone number. The num-

ber appears in the call line. 3. To start the call, tap

. 4. To end the call, tap

. NOTE: To use the speaker during a call, tap Make a call from contacts 1. Tap Contacts at bottom of the Home screen. 2. Tap

. key or tap Receive a call when device is unlocked on the Home Press screen. Receive a call when device is locked To receive a call:

Slide to the right on the Lock screen. To ignore a call:

to the left on the Lock screen. Slide Contacts To add a new contact:

1. Tap Contacts at bottom of the Home screen. 2. Tap 3. Select a contact type. Fill in the contact informa-

. tion. 3. Tap next to the contact person on the list. 4. Tap OK when finished. 14 700 Quick Start Guide.fm Page 15 Thursday, May 31, 2012 1:20 PM PTT Call NOTE: PTT is an optional feature and may not be available on your device. To perform a PTT call:

1. Press and release the PTT button. 2. Tap to select a Contact from the list. 3. Press and hold the PTT button. 4. Begin talking after hearing a chirping sound. 5. Release the PTT button to listen. Receive/Answer a PTT call To receive and answer a PTT call:

1. When your device emits a tone or vibrates, wait for the caller to finish speaking. 2. Press and hold the PTT button. Begin talking after hearing a chirping sound. 3. Release the PTT button to listen. Send Call Alert Call Alert lets the recipient know you want to talk on a PTT call. To send a Call Alert:

1. Press and release the PTT button. 2. Select a PTT Contact from the list. 3. Tap the Call Alert button. Scan On Groups Off My Presence Indicator

(Drag down to change) Call Alert:

Enabled

(Individual & Dialed Number) Enabled

(Personal &

Temp Groups) Disabled Application Launcher Talking Listening Channel Clear No Activity Volume Level Vibrate Silent Search Contact Add Contact Contact Details Minimizes Create New Group Keyboard Settings 15 700 Quick Start Guide.fm Page 16 Thursday, May 31, 2012 1:20 PM Send an Email Message To send an Email:

1. On the Home screen, tap for an agency email or for a personal email account. 2. Tap To: to add a contact or type an Email address. Take a Picture To take a picture:

. 3. Create the Email and then tap Send an SMS / MMS Message To send a text (SMS) or picture/video (MMS) message:

1. On the Home screen, tap 2. Tap To: to add a contact or type a phone num-

. ber. 3. Tap Menu > Insert to capture or attach a file, audio, photo or video. 4. Tap Insert Text to create the message and then tap Send. 16 1. To activate the camera, press and hold the Camera button on the right side of the LEX 700. 2. Rotate the LEX 700 to the horizontal position

(for landscape picture) and frame your subject. 3. Press the Camera button to capture the image. Visit a Web Page To open the browser window from the Home screen:

1. Tap APP Launcher >

2. In the Address field, enter a web address. 3. Press Enter. Opera Mobile

. 700 Quick Start Guide.fm Page 17 Thursday, May 31, 2012 1:20 PM Pair LEX 700 with APX 7000 Radio This feature allows the LEX 700 to pair with and control an APX 7000 radio. NOTE: Pairing is an optional feature and some of the functionality for this feature may not be available on your device. To connect to a radio:

1. Tap APP Launcher >

Remote_Control 2. Tap the Pair to Radio button. 3. Turn on the radio and place it close to the LEX 700, aligning the blue Pairing Point on the LEX 700 with the blue pairing point on the radio. Pairing Points 4. If the pairing process is successful, you hear a tone and the Remote Control screen is shown. 5. Tap the buttons on the screen to set Zone, Channel and Radio Volume. Quick Action Button Quick Action Request Press the Quick Action button on the LEX 700 head to signal that you need help. A yellow banner with call and GPS information is displayed and an alert sound is activated. When acknowledgment is received, request suc-

cessful indication is displayed. Tap Close to exit and end the request. NOTE: The Quick Action button is an optional feature and may not be available on your device. Connecting to a Wi-Fi Network The LEX 700 supports managing the WLAN using the Motorola Fusion software. To manage a wireless network on the LEX 700:

1. Tap the Status Bar to open the Device Manage-

ment window. 2. Slide your finger to the right across the tabs and tap the Fusion tab. 3. Tap the required option button. 17 700 Quick Start Guide.fm Page 18 Thursday, May 31, 2012 1:20 PM Reset the LEX 700 To reset the LEX 700 after it has been running (for example, after installing a program or to stop an application):

Press and hold the Power button for at least 7 seconds. As soon as the LEX 700 restarts, release the Power button. The LEX 700 closes all running applications and restarts. To reset the LEX 700 if it stops responding:

Simultaneously press the Power button, Home button and Back/Ok button. The LEX 700 will power off, power on and restart. 18 700 Quick Start Guide.fm Page 19 Thursday, May 31, 2012 1:20 PM Accessories b b A A USB Charger

(P/N:IU08-2050120-WP) 1X Battery 1880mAh

(P/N:82-154162-01) 2X Battery 3760mAh (Optional)

(P/N:82-154162-02) USB Cable

(P/N: 25-128458-01R) 2X Battery Cover (Optional)

(P/N:82-154162-01) 19 700 Quick Start Guide.fm Page 20 Thursday, May 31, 2012 1:20 PM Motorola Solutions, Inc. 1301 E. Algonquin Rd. Schaumburg, IL 60196-1078, U.S.A. http://www.motorolasolutions.com MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. The Bluetooth trademarks are owned by their proprietor and used by Motorola Solutions, Inc. under license. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks are the property of their respective owners. 2012 Motorola Solutions, Inc. All Rights Reserved.

@6802988C26@

6802988C26 Revision A - June 2012

LEX 700 MISSION CRITICAL HANDHELD REGULATORY GUIDE Motorola Solutions reserves the right to make changes to any product to improve reliability, function, or design. Motorola Solutions does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, apparatus, machine, material, method, or process in which Motorola products might be used. An implied license exists only for equipment, circuits, and subsystems contained in Motorola Solutions products. Warranty For the complete Motorola hardware product warranty statement, go to:

http://www.motorolasolutions.com/warranty. Motorola Solutions, Inc. 1301 E. Algonquin Rd. Schaumburg, IL 60196-1078, U.S.A. http://www.motorolasolutions.com MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. 2012 Motorola Solutions, Inc. All Rights Reserved.

@6802988C25@

6802988C25 Rev. A March 2012 Regulatory Information This device is approved under Motorola Solutions, Inc. This guide applies to Model Number LEX 700. All Motorola Solutions devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Local language translations are available at the following website:

http://supportcentral.motorola.com Any changes or modifications to Motorola Solutions equipment, not expressly approved by Motorola Solutions, could void the user's authority to operate the equipment. CAUTION Only use Motorola approved and UL Listed accessories, battery packs and battery chargers. Do NOT attempt to charge damp/wet mobile computers or batteries. All components must be dry before connecting to an external power source. Declared maximum operating temperature: 14F to 131F

(-10C to +55C). UL Listed Products with GPS Underwriters Laboratories Inc. (UL) has not tested the performance or reliability of the Global Positioning System (GPS) hardware, operating software or other aspects of this product. UL has only tested for fire, shock or casualties as outlined in UL's Standard(s) for Safety for Information Technology Equipment, UL60950-1. UL Certification does not cover the performance or reliability of the GPS hardware and GPS operating software. UL MAKES NO REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY GPS RELATED FUNCTIONS OF THIS PRODUCT. Bluetooth Wireless Technology This is an approved Bluetooth product. For more information or to view End Product Listing, please visit https://www.bluetooth.org/tpg/listings,cfm Wireless Device Country Approvals Regulatory markings, subject to certification, are applied to the device signifying the radio(s) is/are approved for use in the following countries:

United States, Canada, Japan, China, S. Korea, Australia, and Europe 1,2 Please refer to the Motorola Declaration of Conformity (DoC) for details of other country markings. This is available at www.motorola.com/

enterprisemobility/doc. Note: The use of RFID Devices have varying restrictions of use; please refer to the Motorola Declaration of Conformity (DoC) for details. Operation of the device without regulatory approval is illegal. Country Roaming This device incorporates the International Roaming feature (IEEE802.11d) which will ensure the product operates on the correct channels for the particular country of use. Ad-Hoc Operation (5 GHz band) Ad-Hoc operation is limited to Channels 36-48 (5150-5250 MHz). Use of this band is restricted to Indoor Use Only, any other use will make the operation of this device illegal. Frequency of Operation FCC and IC 5 GHz Only The use in the UNII (Unlicensed National Information Infrastructure) band 1 5150-5250 MHz band is restricted to Indoor Use Only; any other use will make the operation of this device illegal. CAUTION The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-

Channel mobile satellite systems. High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices. AVERTISSEMENT Le dispositive fonctionnant dans la bande 5150-5250 MHz est rserv uniquement pour une utilisation l'intrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. Les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., qu'ils ont la priorit) pour les bands 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. 2.4 GHz Only The available channels for 802.11 b/g operation in the US are Channels 1 to 11. The range of channels is limited by firmware. Health and Safety Recommendations Ergonomic Recommendations CAUTION In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your local Health & Safety Manager to ensure that you are adhering to your company's safety programs to prevent employee injury. Reduce or eliminate repetitive motion Maintain a natural position Reduce or eliminate excessive force Keep objects that are used frequently within easy reach Perform tasks at correct heights Reduce or eliminate vibration Reduce or eliminate direct pressure Provide adjustable workstations Provide adequate clearance Provide a suitable working environment Improve work procedures. Safety on the Road Do not take notes or use the device while driving. Jotting down a "to do" list or flipping through your address book takes attention away from your primary responsibility, driving safely. When driving a car, driving is your first responsibility - Give full attention to driving. Check the laws and regulations on the use of wireless devices in the areas where you drive. Always obey them. When using a wireless device behind the wheel of a car, practice good common sense and remember the following tips:

1. Get to know your wireless device and any features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road. 2. When available, use a hands free device. 3. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be hazardous. 4. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue. 5. Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations that have the potential to divert your attention from the road. 6. Use your wireless phone to call for help. Dial the Emergency services, (9-

1-1 in the US, and 1-1-2 in Europe) or other local emergency number in the case of fire, traffic accident or medical emergencies. Remember, it is a free call on your wireless phone! The call can be made regardless of any security codes and depending on a network, with or without a SIM card inserted. 7. Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call the Emergency Services, (9-1-1 in the US, and 1-1-2 in Europe) or other local emergency number, as you would want others to do for you. 8. Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number. The wireless industry reminds you to use your device / phone safely when driving. Warnings for Use of Wireless Devices Please observe all warning notices with regard to the usage of wireless devices. Potentially Hazardous Atmospheres - Vehicles Use You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants etc. and areas where the air contains chemicals or particles (such as grain, dust, or metal powders) and any other area where you would normally be advised to turn off your vehicle engine. Safety in Aircraft Switch off your wireless device whenever you are instructed to do so by airport or airline staff. If your device offers a 'flight mode' or similar feature, consult airline staff as to its use in flight. Safety in Hospitals Wireless devices transmit radio frequency energy and may affect medical electrical equipement. Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics or healthcare facilitlies. These requests are designed to prevent possible interference with sensitive medical equipement. Pacemakers Pacemaker manufacturers recommended that a minimum of 15 cm (6 inches) be maintained between a handheld wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with independent research and recommendations by Wireless Technology Research. Persons with Pacemakers:

Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker when turned ON. Should not carry the device in a breast pocket. Should use the ear furthest from the pacemaker to minimise the potential for interference. If you have any reason to suspect that interference is taking place, turn OFF your device. Other Medical Devices Please consult your physician or the manufacturer of the medical device, to determine if the operation of your wireless product may interfere with the medical device. 1 2 3 RF Exposure Guidelines Safety Information Reducing RF Exposure Use Properly Only operate the device in accordance with the instructions supplied. International The device complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices. For information on "International" human exposure to electromagnic fields refer to the Motorola Declaration of Conformity (DoC) at http://www.motorola.com/

doc. US and Canada Phones (placed to ear or used with headset) Use only Motorola tested and approved belt-clips, holsters, and similar accessories to ensure FCC Compliance. The use of third-party belt-clips, holsters, and similar accessories may not comply with FCC RF exposure compliance requirements, and should be avoided. The FCC has granted an Equipment Authorization for these model phones with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on these model phones is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/ea/fccid. Co-located statement To comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must not be co-located or operating in conjunction with any other transmitter/antenna except those already approved in this filling. Handheld Devices This device was tested for typical body-worn operation. Use only Motorola tested and approved belt-clips, holsters, and similar accessories to ensure FCC Compliance. The use of third-party belt-clips, holsters, and similar accessories may not comply with FCC RF exposure compliance requirements, and should be avoided. LED Devices Complies with IEC/EN60825-1:2001 & IEC/EN62471:2006 Power Supply Use ONLY a LISTED Motorola, Type no. 50-14000 (xxVdc, xxA), PWRS-

14000 (xxVdc, xxA), or KT -14000 (xxV, xxA), direct plug-in power supply, marked Class 2 or LPS (IEC60950-1, SELV). Use of alternative Power Supply will invalidate any approvals given to this unit and may be dangerous. Batteries Battery Information Use only Motorola approved batteries. Accessories which have battery charging capability are approved for use with the following battery models:

Motorola 82-154162-01 (3.7 Vdc, 1880 mAh) Motorola 82-154162-02 (3.7 Vdc, 3760 mAh) Motorola rechargeable battery packs are designed and constructed to the highest standards within the industry. However, there are limitations to how long a battery can operate or be stored before needing replacement. Many factors affect the actual life cycle of a battery pack, such as heat, cold, harsh environmental conditions and severe drops. When batteries are stored over six (6) months, some irreversible deterioration in overall battery quality may occur. Store batteries at half of full charge in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of metallic parts and electrolyte leakage. When storing batteries for one year or longer, the charge level should be verified at least once a year and charged to half of full charge. Replace the battery when a significant loss of run time is detected. Standard warranty period for all Motorola batteries is 30 days, regardless if the battery was purchased separately or included as part of the mobile computer or bar code scanner. For more information on Motorola batteries, please visit: http:/mysymbolcare.symbol.com/battery/batbasics1.html Battery Safety Guidelines The area in which the units are charged should be clear of debris and combustible materials or chemicals. Particular care should be taken where the device is charged in a non commercial environment. Follow battery usage, storage, and charging guidelines found in the user's guide. Improper battery use may result in a fire, explosion, or other hazard. To charge the mobile device battery, the battery and charger temperatures must be between +32 ?F and +104 ?F (0 ?C and +40 ?C) Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present a risk of fire, explosion, leakage, or other hazard. If you have any questions about the compatibility of a battery or a charger, contact Motorola support. For devices that utilize a USB port as a charging source, the device shall only be connected to products that bear the USB-IF logo or have completed the USB-IF compliance program. Do not disassemble or open, crush, bend or deform, puncture, or shred. Severe impact from dropping any battery-operated device on a hard surface could cause the battery to overheat. Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals. Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, or expose to fire, explosion, or other hazard. Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle or near a radiator or other heat source. Do not place battery into a microwave oven or dryer. Battery usage by children should be supervised. Please follow local regulations to promptly dispose of used re-chargeable batteries. Do not dispose of batteries in fire. Seek medical advice immediately if a battery has been swallowed. In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with large amounts of water and seek medical advice. If you suspect damage to your equipment or battery, contact Motorola support to arrange for inspection. Statement of Compliance Motorola/Symbol hereby, declares that this device is in compliance with the essential requirements and other relevant provisions of Directives 1999/5/

EC, 2004/108/EC and 2006/95/EC. Declaration of Conformities may be obtained from http://www.motorola.com/enterprisemobility/doc. Use with Hearing Aids When some wireless devices are used near some hearing devices (hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise, and wireless devices also vary in the amount of interference they generate. In the event of interference you may want to consult your hearing aid supplier to discuss solutions. The use of 5 GHz RLAN's, for use in Canada, have the following restrictions:

Restricted Band 5.60 - 5.65 GHz This device complies with RSS 210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Label Marking: The Term "IC:" before the radio certification only signifies that Industry Canada technical specifications were met. Software Support Motorola Enterprise Mobility wants to ensure that customers have the latest entitled software at the time of device purchase in order to keep the device operating at peak performance levels. To confirm that your Motorola device has the latest entitled software available at the time of purchase, visit http://

www.motorola.com/enterprisemobility. Check for the latest software from Support > Enterprise Mobility Products, or search for the device and select Support > Software Downloads. If your device does not have the latest entitled software as of your device purchase date, e-mail Motorola at entitlementservices@motorola.com and ensure you include the following essential device information:

Model number Serial number Proof of purchase Title of the software download you are requesting. If it is determined by Motorola that your device is entitled to the latest version of software, as of the date you purchased your device, you will receive an e-

mail containing a link directing you to a Motorola Web site to download the appropriate software. The wireless telephone industry has developed ratings for some of their mobile phones, to assist hearing device users in finding phones that may be compatible with their hearing devices. Not all phones have been rated. Motorola terminals that are rated have the rating included on the Declaration of Conformity (DoC) at http://www.motorola.com/doc The ratings are not guarantees. Results will vary depending on the user's hearing device and hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated phone successfully. Trying out the phone with your hearing device is the best way to evaluate it for your personal needs. M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than phones that are not labeled. M4 is the better/higher of the two ratings. T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing device's telecoil ("T Switch" or "Telephone Switch") than unrated phones. T4 is the better/higher of the two ratings.

(Note that not all hearing devices have telecoils in them.) Hearing devices may also be measured for immunity to this type of interference. Your hearing device manufacturer or hearing health professional may help you find results for your hearing device. The more immune your hearing aid is, the less likely you are to experience interference noise from mobile phones. Hearing Aid Compatibility This device is marked HAC showing compliance with the applicable requirements of FCC Part 68 and CS03-Part 5. This device is not HAC compliant during Voice Over IP (VOIP) calls Radio Frequency Interference Requirements- FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna Connect the equipment into an outlet on a circuit different from that to Increase the separation between the equipment and receiver which the receiver is connected Consult the dealer or an experienced radio/TV technician for help Radio Transmitters (Part 15) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The use of 5 GHz WLAN's, for use in the US , have the following restrictions:

Notched Band 5.60 - 5.65 GHz Radio Frequency Interference Requirements- Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil num?rique de la classe B est conforme ? la norme NMB-003 du Canada. Radio Transmitters For RLAN Devices:

4 5 6 7