all | frequencies |
|
|
|
|
|
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
manuals | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 4 5 6 |
|
UserMan Part1 | Users Manual | 2.84 MiB | September 30 2009 / November 27 2009 | |||
1 2 3 4 5 6 |
|
UserMan Part2 | Users Manual | 1.84 MiB | September 30 2009 / November 27 2009 | |||
1 2 3 4 5 6 |
|
UserMan Part3 | Users Manual | 2.22 MiB | September 30 2009 / November 27 2009 | |||
1 2 3 4 5 6 |
|
UserMan Part4 | Users Manual | 1.82 MiB | September 30 2009 / November 27 2009 | |||
1 2 3 4 5 6 |
|
Internal Photos 1 | Internal Photos | 2.78 MiB | September 30 2009 / November 27 2009 | |||
1 2 3 4 5 6 |
|
Internal Photos 2 | Internal Photos | 2.55 MiB | September 30 2009 / November 27 2009 | |||
1 2 3 4 5 6 |
|
Internal Photos 3 | Internal Photos | 2.67 MiB | September 30 2009 / November 27 2009 | |||
1 2 3 4 5 6 |
|
External Photos | External Photos | 323.92 KiB | September 30 2009 / November 27 2009 | |||
1 2 3 4 5 6 |
|
External Photos Location of Markings | External Photos | 980.10 KiB | September 30 2009 / November 27 2009 | |||
1 2 3 4 5 6 |
|
Label | ID Label/Location Info | 228.51 KiB | September 30 2009 | |||
1 2 3 4 5 6 | Attestation Statements | April 12 2010 / April 14 2010 | ||||||
1 2 3 4 5 6 |
|
Power of Attorney Letter | Cover Letter(s) | 23.28 KiB | December 04 2010 | |||
1 2 3 4 5 6 |
|
Reason for PC | Cover Letter(s) | 12.24 KiB | December 04 2010 | |||
1 2 3 4 5 6 |
|
SAR Attestation letter | Attestation Statements | 30.58 KiB | April 14 2010 | |||
1 2 3 4 5 6 | Test Setup Photos | December 04 2010 | ||||||
1 2 3 4 5 6 | Test Report | December 04 2010 | ||||||
1 2 3 4 5 6 |
|
CIIPC | Cover Letter(s) | 16.78 KiB | November 01 2010 | |||
1 2 3 4 5 6 |
|
DOC | Cover Letter(s) | 15.82 KiB | November 01 2010 | |||
1 2 3 4 5 6 |
|
Declaration | Cover Letter(s) | 48.25 KiB | January 14 2010 | |||
1 2 3 4 5 6 | RF Exposure Info | November 01 2010 | ||||||
1 2 3 4 5 6 | RF Exposure Info | November 01 2010 | ||||||
1 2 3 4 5 6 | RF Exposure Info | November 01 2010 | ||||||
1 2 3 4 5 6 | RF Exposure Info | November 01 2010 | ||||||
1 2 3 4 5 6 | Cover Letter(s) | January 11 2010 / January 14 2010 | ||||||
1 2 3 4 5 6 |
|
Attestation Ad Hoc Declaration | Attestation Statements | 21.79 KiB | September 30 2009 | |||
1 2 3 4 5 6 | Block Diagram | Block Diagram | September 30 2009 | confidential | ||||
1 2 3 4 5 6 |
|
Confidentiality Request | Cover Letter(s) | 82.15 KiB | September 30 2009 | |||
1 2 3 4 5 6 |
|
Confidentiality Request Short Term | Cover Letter(s) | 22.63 KiB | September 30 2009 | |||
1 2 3 4 5 6 |
|
Power of Attorney Letter | Cover Letter(s) | 21.03 KiB | September 30 2009 | |||
1 2 3 4 5 6 |
|
Coverletter Lab PBA FCC response | Cover Letter(s) | 64.99 KiB | September 30 2009 | |||
1 2 3 4 5 6 | Operational Description | Operational Description | September 30 2009 | confidential | ||||
1 2 3 4 5 6 | Operational Description Antenna | Operational Description | September 30 2009 | confidential | ||||
1 2 3 4 5 6 | RF Exposure Info | September 30 2009 | ||||||
1 2 3 4 5 6 | RF Exposure Info | September 30 2009 | ||||||
1 2 3 4 5 6 | Schematics 1 | Schematics | September 30 2009 | confidential | ||||
1 2 3 4 5 6 | Schematics 2 | Schematics | September 30 2009 | confidential | ||||
1 2 3 4 5 6 | Schematics 3 | Schematics | September 30 2009 | confidential | ||||
1 2 3 4 5 6 | Test Report | September 30 2009 | ||||||
1 2 3 4 5 6 | Test Report | September 30 2009 | ||||||
1 2 3 4 5 6 | Test Setup Photos | September 30 2009 / November 27 2009 | ||||||
1 2 3 4 5 6 | RF Exposure Info | September 30 2009 | ||||||
1 2 3 4 5 6 | RF Exposure Info | September 30 2009 | ||||||
1 2 3 4 5 6 | RF Exposure Info | September 30 2009 | ||||||
1 2 3 4 5 6 | RF Exposure Info | September 30 2009 | ||||||
1 2 3 4 5 6 | Test Report | September 30 2009 | ||||||
1 2 3 4 5 6 | RF Exposure Info | September 30 2009 | ||||||
1 2 3 4 5 6 | RF Exposure Info | September 30 2009 | ||||||
1 2 3 4 5 6 | RF Exposure Info | September 30 2009 | ||||||
1 2 3 4 5 6 | Test Report | September 30 2009 | ||||||
1 2 3 4 5 6 | Test Report | September 30 2009 | ||||||
1 2 3 4 5 6 | Test Setup Photos | September 30 2009 / November 27 2009 |
1 2 3 4 5 6 | UserMan Part1 | Users Manual | 2.84 MiB | September 30 2009 / November 27 2009 |
w
r
r
' p p p p
' ' r
r
r
r r
p '
p '
p '
' p
' p
' p
p
p
p
1 2 3 4 5 6 | UserMan Part2 | Users Manual | 1.84 MiB | September 30 2009 / November 27 2009 |
p p
p
p
p
p
p
p p
p p
p 'p
p 'p
p
p p
p p p 'p
p p p 'p
1 2 3 4 5 6 | UserMan Part3 | Users Manual | 2.22 MiB | September 30 2009 / November 27 2009 |
Accessories 4 - 5 Table 4-2 LED Charging Status Indicators LED Indication Mobile Computer Charging (LED on mobile computer) Off Mobile computer not placed correctly in the cradle; cable not connected correctly;
charger is not powered. Fast Blinking Amber Error in charging; check placement of mobile computer. Slow Blinking Amber Mobile computer is charging. Solid Amber Charging complete. Note: When the battery is initially inserted in the mobile computer, the amber LED flashes once if the battery power is low or the battery is not fully inserted. Spare Battery Charging (LED on cradle) Off No spare battery in slot; spare battery not placed correctly; cradle is not powered. Fast Blinking Amber Error in charging; check placement of spare battery. Slow Blinking Amber Spare battery is charging. Solid Amber Charging complete. Preliminary 4 - 6 MC31XX Series Mobile Computer User Guide Four Slot Cradles CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 5-2. There are two four slot cradles, Four Slot Charge Only cradle and Four Slot Ethernet cradle. The Four Slot Ethernet cradle provides Ethernet communications. Both four slot cradles:
Provide 5.4 VDC power for operating the mobile computer and charging the battery.
Simultaneously charges up to four mobile computers. Battery Charging The four slot cradle can charge up to four mobile computers simultaneously. To charge the mobile computer:
1. Slide the mobile computer into the mobile computer slot. Charge LED Indicator (amber) Scan/Charge Indicator LED Bar Mobile Computer Slot Speed LED (Ethernet Cradle Only) Link LED (Ethernet Cradle Only) Power LED (Charge Only Cradle) Figure 4-2 Four Slot Cradles 2. The mobile computer amber Charge LED Indicator, indicates the mobile computer battery charging status. The Standard Battery usually charges in less than four hours and the Extended Life Battery usually charges in less than six hours. See Table 4-2 for charging status indications. 3. When charging is complete, remove the mobile computer from the cradle. LED Charge Indications The Four Slot cradles use the mobile computer amber Charge LED Indicator to indicate the battery charging status. See Table 4-2 on page 4-5 for charging status indications. Preliminary Accessories 4 - 7 Power LED The green Power LED (only on the Four Slot Charge Only cradle) lights to indicate that the Four Slot Charge Only cradle is connected to a power source. Speed LED The green Speed LED (only on the Four Slot Ethernet cradle) lights to indicate that the transfer rate is 100 Mbps. When it is not lit it indicates that the transfer rate is 10 Mbps. Link LED The yellow Link LED (only on the Four Slot Ethernet cradle) blinks to indicate activity, or stays lit to indicate that a link is established. When it is not lit, it indicates that there is no link. Preliminary 4 - 8 MC31XX Series Mobile Computer User Guide Four Slot Spare Battery Charger CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 5-2. The Four Slot Spare Battery Charger simultaneously charges up to four spare batteries. Spare Battery Charging To charge up to four MC31XX spare batteries:
1. Insert the spare battery into the spare battery charging slot, bottom first. 2. Pivot the top of the battery down onto the contact pins. Power Supply Spare Battery Charging Slot Spare Battery Charging LEDs (4) 2 1 Battery Clip Spare Batteries Figure 4-3 Four Slot Spare Battery Charger 3. Gently press down on the battery to ensure proper contact. The Standard Battery usually charges in less than four hours and the Extended Life Battery usually charges in less than six hours. See Table 4-2 on page 4-5 for charging status indications. 4. When charging is complete, press the battery clip and lift battery out of the slot. LED Charge Indications The Spare Battery Charging LEDs indicate the spare battery charging status. The Spare Battery Charging LEDs are arranged in the same pattern as the spare battery charging slots so that the charging status of each battery can be identified. See Table 4-2 on page 4-5 for charging status indications. Preliminary Accessories 4 - 9 Cables The cables are available with a variety of connection capabilities. MC31XX Communication/Charge cables:
Provide the mobile computer with operating and charging power when used with the Symbol approved power supply.
Synchronize information between the mobile computer and a host computer. With customized or third party software, it can also synchronize the mobile computer with corporate databases.
Provide serial connection through the serial pass-through port for communication with a serial device, such as a host computer. For communication setup procedures, refer to the MC31XX Integrator Guide.
Provide USB connection through the USB pass-through port for communication with a USB device, such as a host computer. For communication setup procedures, refer to the MC31XX Integrator Guide. The following MC31XX Communication/Charge cables are available:
Serial (RS232) Charge cable (9-pin D female with power input receptacle)
USB Client Charge cable (standard-A connector and a barrel receptacle for power). Dedicated Printer cables, provide communication with a dedicated printer. The following printer cables are available directly from the printer manufacturer:
ONeil printer cable Zebra printer cable
Monarch printer cable. Snaps Figure 4-4 Cables Preliminary 4 - 10 MC31XX Series Mobile Computer User Guide Battery Charging and Operating Power CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 5-2. The MC31XX Communication/Charge cables can charge the mobile computer battery and supply operating power. To charge the mobile computer battery:
1. Connect the MC31XX Communication/Charge cable power input connector to the Symbol approved power source. 2. Slide the bottom of the mobile computer into the MC31XX connector end of the MC31XX Communication/Charge cable and gently press in until the snaps latch into the mobile computer. 3. The mobile computer amber Charge LED Indicator indicates the mobile computer battery charging status. The Standard Battery usually charges in less than four hours and the Extended Life Battery usually charges in less than six hours. See, Table 4-2 on page 4-5 for charging status indications. 4. When charging is complete, remove the cable by gently pulling the mobile computer and the cable apart until the snaps release the mobile computer. LED Charge Indications The MC31XX Communication/Charge cables use the amber Charge LED Indicator to indicate the MC31XX battery charging status. See, Table 4-2 on page 4-5 for charging status indications. Preliminary Accessories 4 - 11 Universal Battery Charger (UBC) Adapter CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 5-2. The UBC Adapter can be used with a power supply as a standalone spare battery charger or it can be used with the four station UBC2000 to simultaneously charge up to four spare batteries. For additional information on the UBC 2000, refer to the UBC 2000 Quick Reference Guide p/n 70-33188-xx. Spare Battery Charging To charge spare batteries:
1. Insert the spare battery into the spare battery charging slot, bottom first. 2. Pivot the top of the battery down onto the contact pins. 2 1 Battery Battery Clip UBC Adapter Spare Battery Charging Slot Figure 4-5 UBC Adapter Battery Insertion 3. Gently press down on the battery to ensure proper contact. The Standard Battery usually charges in less than four hours and the Extended Life Battery usually charges in less than six hours. See, Table 4-3 on page 4-12 for charging status indications. 4. When charging is complete, press the battery clip and lift the battery out of the slot. UBC Adapter LED Charge Indications The UBC Adapter charging LEDs indicate the battery charging status. The Standard Battery usually charges in less than four hours and the Extended Life Battery usually charges in less than six hours. Preliminary 4 - 12 MC31XX Series Mobile Computer User Guide POWER READY or STANDBY or FAULT
(Green)
(Flashing Yellow)
(Solid Yellow) CHARGING
(Solid Yellow) Figure 4-6 UBC Adapter LEDs Table 4-3 UBC Adapter Charge LED Status Indications LED Indication Description POWER Green Power is connected to the UBC Adapter. READY or Green Charging complete. STANDBY or Flashing-Yellow The battery was deeply discharged and is being trickle charged to bring the voltage up to the operating level. After operating level voltage is achieved, the battery charges normally. FAULT Yellow Charging error, check placement of mobile computer/spare battery. CHARGING Yellow Normal charge. Preliminary Accessories 4 - 15 Fabric Holster The Fabric Holster provides a soft holder for the mobile computer. It consists of a fabric mobile computer holder, a detachable shoulder strap and a detachable belt clip. Press the release button to remove the detachable belt clip. See Figure 4-10 to remove the detachable clip see Figure 4-11 on page 4-15 to attach the Fabric Holster to a belt and see Figure 4-12 on page 4-16 to attach the Fabric Holster to a shoulder strap. Release Button Detachable Belt Clip Mobile Computer Holder Figure 4-10 Fabric Holster Detachable Belt Clip Belt Clip Pinch the clip release and attach the Fabric Holster to a belt or waist band. Clip Release Mobile Computer Holder Figure 4-11 Attaching the Fabric Holster To a Belt Preliminary 4 - 16 MC31XX Series Mobile Computer User Guide Shoulder Strap Remove the detachable belt clip (see Figure 4-10 on page 4-15) and attach the shoulder strap. Shoulder Strap Clip Release Figure 4-12 Attach the Fabric Holster To the Shoulder Strap The Fabric Holster holds the mobile computer on a belt or waist band. 1. To insert the mobile computer, slide the mobile computer into the Fabric Holster with the screen facing the user. 2. Pull restraining strap over mobile computer and secure in the clip. 3. To remove the mobile computer, pull down on restraining strap to release from clip and lift retaining strap clear. 4. Lift mobile computer out of Fabric Holster. Figure 4-13 Insert and Remove the Mobile Computer Preliminary Chapter 5 Maintenance and Troubleshooting Introduction This chapter includes instructions on cleaning and storing the mobile computer, and provides troubleshooting solutions for potential problems during mobile computer operation. Maintaining the Mobile Computer For trouble-free service, observe the following tips when using the mobile computer:
For trouble-free service, observe the following tips when using the MC31XX:
Do not scratch the screen of the MC31XX. When working with the MC31XX, use the supplied stylus or plastic-tipped pens intended for use with a touch-sensitive screen. Never use an actual pen or pencil or other sharp object on the surface of the MC31XX screen. Motorola recommends using a screen protector, p/n KT-122010-01R. The touch-sensitive screen of the MC31XX is glass. Do not to drop the MC31XX or subject it to strong impact.
Protect the MC31XX from temperature extremes. Do not leave it on the dashboard of a car on a hot day, and keep it away from heat sources.
Do not store or use the MC31XX in any location that is dusty, damp, or wet.
Use a soft lens cloth to clean the MC31XX. If the surface of the MC31XX screen becomes soiled, clean it with a soft cloth moistened with a diluted window-cleaning solution.
Periodically replace the rechargeable battery to ensure maximum battery life and product performance. Battery life depends on individual usage patterns. Preliminary 5 - 2 MC31XX Series Mobile Computer User Guide
A screen protector is applied to the MC31XX. Motorola recommends using this to minimize wear and tear. Screen protectors enhance the usability and durability of touch screen displays. Benefits include:
Protection from scratches and gouges
Durable writing and touch surface with tactile feel
Abrasion and chemical resistance
Glare reduction
Keeping the devices screen looking new
Quick and easy installation. Battery Safety Guidelines The area in which the units are charged should be clear of debris and combustible materials or chemicals. Particular care should be taken where the device is charged in a non commercial environment. Follow battery usage, storage, and charging guidelines found in the user's guide. Improper battery use may result in a fire, explosion, or other hazard. To charge the mobile device battery, the battery and charger temperatures must be between +32 F and
+104 F (0 C and +40 C)
Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present a risk of fire, explosion, leakage, or other hazard. If you have any questions about the compatibility of a battery or a charger, contact Motorola Enterprise Mobility support. For devices that utilize a USB port as a charging source, the device shall only be connected to products that bear the USB-IF logo or have completed the USB-IF compliance program. To enable authentication of an approved battery, as required by IEEE1725 clause 10.2.1, all batteries will carry a Motorola hologram. Do not fit any battery without checking it has the Motorola authentication hologram.
Do not disassemble or open, crush, bend or deform, puncture, or shred.
Severe impact from dropping any battery-operated device on a hard surface could cause the battery to overheat.
Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals.
Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, or expose to fire, explosion, or other hazard.
Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle or near a radiator or other heat source. Do not place battery into a microwave oven or dryer.
Battery usage by children should be supervised.
Please follow local regulations to properly dispose of used re-chargeable batteries.
Do not dispose of batteries in fire. In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with large amounts of water and seek medical advice. If you suspect damage to your equipment or battery, contact Motorola Enterprise Mobility support to arrange for inspection. Preliminary
Maintenance and Troubleshooting 5 - 3 Cleaning CAUTION Always wear eye protection. Read warning label on compressed air and alcohol product before using. If you have to use any other solution for medical reasons please contact Motorola for more information. WARNING! Avoid exposing this product to contact with hot oil or other flammable liquids. If such exposure occurs, unplug the device and clean the product immediately in accordance with these guidelines. Materials Required
Alcohol wipes Lens tissue
Cotton tipped applicators Isopropyl alcohol
Can of compressed air with a tube. Cleaning the MC31XX Housing Using the alcohol wipes, wipe the housing including keys and in-between keys. Display The display can be wiped down with the alcohol wipes, but care should be taken not to allow any pooling of liquid around the edges of the display. Immediately dry the display with a soft, non-abrasive cloth to prevent streaking. Scanner Exit Window Wipe the scanner exit window periodically with a lens tissue or other material suitable for cleaning optical material such as eyeglasses. Connector 1. Remove the main battery from mobile computer. See Replacing the Battery on page 1-8. 2. Dip the cotton portion of the cotton tipped applicator in isopropyl alcohol. 3. Rub the cotton portion of the cotton tipped applicator back-and-forth across the connector on the bottom of the MC31XX. Do not leave any cotton residue on the connector. 4. Repeat at least three times. 5. Use the cotton tipped applicator dipped in alcohol to remove any grease and dirt near the connector area. 6. Use a dry cotton tipped applicator and repeat steps 4 through 6. Preliminary
5 - 4 MC31XX Series Mobile Computer User Guide 7. Spray compressed air on the connector area by pointing the tube/nozzle about inch away from the surface. CAUTION: Do not point nozzle at yourself and others, ensure the nozzle or tube is away from your face. 8. Inspect the area for any grease or dirt, repeat if required. Cleaning Cradle Connectors To clean the connectors on a cradle:
1. Remove the DC power cable from the cradle. 2. Dip the cotton portion of the cotton tipped applicator in isopropyl alcohol. 3. Rub the cotton portion of the cotton tipped applicator along the pins of the connector. Slowly move the applicator back-and-forth from one side of the connector to the other. Do not let any cotton residue on the connector. 4. All sides of the connector should also be rubbed with the cotton tipped applicator. 5. Spray compressed air in the connector area by pointing the tube/nozzle about inch away from the surface. CAUTION: do not point nozzle at yourself and others, ensure the nozzle or tube is pointed away from your face. 6. Ensure that there is no lint left by the cotton tipped applicator, remove lint if found. 7. If grease and other dirt can be found on other areas of the cradle, use lint free cloth and alcohol to remove. 8. Allow at least 10 to 30 minutes (depending on ambient temperature and humidity) for the alcohol to air dry before applying power to cradle. If the temperature is low and humidity is high, longer drying time is required. Warm temperature and dry humidity requires less drying time. Cleaning Frequency The cleaning frequency is up to the customers discretion due to the varied environments in which the mobile devices are used. They may be cleaned as frequently as required. However when used in dirty environments it may be advisable to periodically clean the scanner exit window to ensure optimum scanning performance. Preliminary Maintenance and Troubleshooting 5 - 5 Troubleshooting Mobile Computer Table 5-1 Troubleshooting the Mobile Computer Problem Cause Solution Mobile computer does not turn on. Main battery not charged. Charge or replace the main battery. Main battery not installed properly. Ensure the battery is installed properly. See Install Main Battery on page 1-6. System crash. Battery did not charge. Battery failed. Perform a warm boot. If the mobile computer still does not turn on, perform a cold boot. For more information see, Resetting the Mobile Computer on page 2-26. Replace battery. If the mobile computer still does not operate, try a warm boot, then a cold boot. For more information see, Resetting the Mobile Computer on page 2-26. Mobile computer removed from cradle while battery was charging. Insert mobile computer in cradle and begin charging. The Standard Battery requires up to four hours to recharge fully and the Extended Life Battery requires up to six hours to recharge fully. Extreme battery temperature. Battery does not charge if ambient temperature is below 32F
(0C) or above 104F (40C). Cannot see characters on screen. Mobile computer not powered on. Press the Power button. During data communication, no data was transmitted, or transmitted data was incomplete. Mobile computer removed from cradle or unplugged from host computer during communication. Replace the mobile computer in the cradle, or reattach the cable and re-transmit. Incorrect cable configuration. See the system administrator or refer to the MC31XX Series Mobile Computer Integrator Guide. Communication software was incorrectly installed or configured. See the system administrator or refer to the MC31XX Series Mobile Computer Integrator Guide. Mobile computer does not emit sound. Volume setting is low or turned off. Mobile computer may be a beeper only configuration or incorrect setting is programmed into device. Preliminary 5 - 6 MC31XX Series Mobile Computer User Guide Table 5-1 Troubleshooting the Mobile Computer (Continued) Problem Cause Solution Mobile computer turns itself off. Mobile computer is inactive. The mobile computer turns off after a period of inactivity. This period can be set from one to five minutes, in one-minute intervals. Battery is depleted. Recharge or replace the battery. Battery is not inserted properly. Insert the battery properly. For more information see, Install Main Battery on page 1-6. Tapping the window buttons or icons does not activate the corresponding feature. Touch screen not calibrated correctly. Re-calibrate the screen. From the mobile computer, Demo window double-tap the Ctl Panel icon and double-tap on Touch Calibrate. Follow the screen prompts. The system crashed. Warm boot the system. To perform a warm boot, see Resetting the Mobile Computer on page 2-26. A message appears stating that the mobile computer memory is full. Too many files stored on the mobile computer. Too many applications installed on the mobile computer. Delete unused memos and records. If necessary, save these records on the host computer. Remove unused installed applications from the mobile computer to recover memory. The mobile computer does not accept scan input. Scanning application is not loaded. Verify that the mobile computer is loaded with a scanning application. See the system administrator. Unreadable bar code. Ensure the symbol is not defaced. Distance between scan window and bar code is incorrect. Mobile computer is not programmed for the bar code type. Ensure the mobile computer is within proper scanning range. Ensure the mobile computer is programmed to accept the type of bar code scanned. Mobile computer is not programmed to generate a beep. If a beep on a good decode is expected and a beep is not heard, check that the application is set to generate a beep on good decode. Battery is low. Check the battery level. When the battery is low, the mobile computer automatically goes into suspend mode. Preliminary Maintenance and Troubleshooting 5 - 7 Single Slot Serial/USB Cradle Table 5-2 Troubleshooting the Single Slot Serial/USB Cradle Symptom Possible Cause Solution Mobile computer amber Charge LED Indicator does not light when mobile computer inserted. Spare Battery Charging LED does not light when spare battery is inserted. Mobile computer battery is not charging. Cradle is not receiving power. Ensure the power cable is connected securely to both the cradle and to AC power. Mobile computer is not correctly seated. Remove and re-insert the mobile computer into the cradle, ensuring it is correctly seated. Spare battery is not correctly seated. Remove and re-insert the spare battery into the charging slot, ensuring it is correctly seated. Mobile computer was removed from cradle or cradle was unplugged from AC power too soon. Ensure cradle is receiving power. Ensure the mobile computer is seated correctly. If the mobile computer battery is fully depleted, it can take up to four hours to fully recharge a Standard Battery and it can take up to six hours to fully recharge an Extended Life Battery. Battery is faulty. Verify that other batteries charge properly. If so, replace the faulty battery. The mobile computer is not fully seated in the cradle. Remove and re-insert the mobile computer into the cradle, ensuring it is correctly seated. Spare battery is not charging. Battery not fully seated in charging slot. Remove and re-insert the spare battery into the cradle, ensuring it is correctly seated. Battery inserted incorrectly. Ensure the contacts are facing down and toward the back of the cradle. Battery is faulty. During data communication, no data was transmitted, or transmitted data was incomplete. Mobile computer removed from cradle during communication. Incorrect cable configuration. Communication software is not installed or configured properly. Verify that other batteries charge properly. If so, replace the faulty battery. Replace mobile computer in cradle and retransmit. See the system administrator or refer to the MC31XX Series Mobile Computer Integrator Guide. See the system administrator or refer to the MC31XX Series Mobile Computer Integrator Guide. Preliminary 5 - 8 MC31XX Series Mobile Computer User Guide Four Slot Charge Only Cradle Table 5-3 Troubleshooting the Four Slot Charge Only Cradle Problem Cause Solution Mobile computer amber Charge LED Indicator does not light when mobile computer inserted. Mobile computer battery is not charging. Cradle is not receiving power. Ensure the power cable is connected securely to both the cradle and to AC power. Mobile computer is not correctly seated. Remove and re-insert the mobile computer into the cradle, ensuring it is correctly seated. Mobile computer was removed from cradle or cradle was unplugged from AC power too soon. Battery is faulty. Ensure cradle is receiving power. Ensure the mobile computer is seated correctly. If the mobile computer battery is fully depleted, it can take up to four hours to fully recharge a Standard Battery and it can take up to six hours to fully recharge an Extended Life Battery. Verify that other batteries charge properly. If so, replace the faulty battery. The mobile computer is not fully seated in the cradle. Remove and re-insert the mobile computer into the cradle, ensuring it is correctly seated. Four Slot Ethernet Cradle Table 5-4 Troubleshooting the Four Slot Ethernet Cradle Problem Cause Solution Mobile computer amber Charge LED Indicator does not light when mobile computer inserted. Mobile computer battery is not charging. Cradle is not receiving power. Ensure the power cable is connected securely to both the cradle and to AC power. Mobile computer is not correctly seated. Remove and re-insert the mobile computer into the cradle, ensuring it is correctly seated. Mobile computer was removed from cradle or cradle was unplugged from AC power too soon. Battery is faulty. Ensure cradle is receiving power. Ensure the mobile computer is seated correctly. If the mobile computer battery is fully depleted, it can take up to four hours to fully recharge a Standard Battery and it can take up to six hours to fully recharge an Extended Life Battery. Verify that other batteries charge properly. If so, replace the faulty battery. The mobile computer is not fully seated in the cradle. Remove and re-insert the mobile computer into the cradle, ensuring it is correctly seated. Preliminary Maintenance and Troubleshooting 5 - 9 Table 5-4 Troubleshooting the Four Slot Ethernet Cradle (Continued) Problem Cause Solution During data communication, no data was transmitted, or transmitted data was incomplete. Mobile computer removed from cradle during communication. Replace mobile computer in cradle and retransmit. Incorrect cable configuration. Ethernet connection error. Link LED is not lit (see Link LED on page 4-7). See the system administrator or refer to the MC31XX Series Mobile Computer Integrator Guide. See the system administrator. Probable Ethernet connection error. Four Slot Spare Battery Charger Table 5-5 Troubleshooting the Four Slot Spare Battery Charger Symptom Possible Cause Solution Spare battery is not correctly seated. Remove and re-insert the spare battery into the charging slot, ensuring it is correctly seated. Spare Battery Charging LED does not light when spare battery is inserted. Spare battery is not charging. Charger is not receiving power. Ensure the power cable is connected securely to both the charger and to AC power. Spare battery is not correctly seated. Remove and re-insert the battery into the charger, ensuring it is correctly seated. Spare battery was removed from charger or charger was unplugged from AC power too soon. Spare battery is faulty. Ensure charger is receiving power. Ensure the spare battery is seated correctly. If a battery is fully depleted, it can take up to four hours to fully recharge a Standard Battery and it can take up to six hours to fully recharge an Extended Life Battery. Verify that other batteries charge properly. If so, replace the faulty battery. Preliminary 5 - 10 MC31XX Series Mobile Computer User Guide UBC Adapter Table 5-6 Troubleshooting the UBC Adapter Symptom Possible Cause Solution Battery Charging LED does not light when spare battery is inserted. Spare battery is not correctly seated. Remove and re-insert the spare battery into the charging slot, ensuring it is correctly seated. Battery not charging. Charger is not receiving power. Ensure the power cable is connected securely to both the charger and to AC power. Spare battery is not correctly seated. Remove and re-insert the spare battery into the charger, ensuring it is correctly seated. Spare battery was removed from charger or charger was unplugged from AC power too soon. Spare battery is faulty. Ensure charger is receiving power. Ensure the spare battery is seated correctly. If a battery is fully depleted, it can take up to four hours to fully recharge a Standard Battery and it can take up to six hours to fully recharge an Extended Life Battery. Verify that other batteries charge properly. If so, replace the faulty battery. Cables Table 5-7 Troubleshooting the Cables Symptom Possible Cause Solution Mobile computer amber Charge LED Indicator does not light when mobile computer attached. Mobile computer battery is not charging. Cable is not receiving power. Ensure the power cable is connected securely to both the cable and to AC power. Mobile computer is not seated correctly in the cable. Remove and re-attach the mobile computer to the MC31XX connector, ensuring it is correctly seated. Mobile computer was detached from cable or cable was unplugged from AC power too soon. Ensure cable is receiving power. Ensure the mobile computer is seated correctly. If the mobile computer battery is fully depleted, it can take up to four hours to fully recharge a Standard Battery and it can take up to six hours to fully recharge an Extended Life Battery. Battery is faulty. Verify that other batteries charge properly. If so, replace the faulty battery. The mobile computer is not fully seated in the cable. Remove and re-attach the mobile computer to the cable, ensuring it is correctly seated. Preliminary Maintenance and Troubleshooting 5 - 11 Table 5-7 Troubleshooting the Cables (Continued) Symptom Possible Cause Solution During data communication, no data was transmitted, or transmitted data was incomplete. Cable removed from mobile computer during communication. Reattach cable to mobile computer and retransmit. Incorrect cable configuration. See the system administrator or refer to the MC31XX Series Mobile Computer Integrator Guide. Communication software is not installed or configured properly. See the system administrator or refer to the MC31XX Series Mobile Computer Integrator Guide. Preliminary Table A-1 summarizes the mobile computer technical specifications and intended operating environments. Table A-2 summarizes the accessory technical specifications and the intended operating environments. Mobile Computer and Accessory Technical Specifications Appendix A Technical Specifications Preliminary MC31XXS:
7.49 in L x 3.25 in W x 1.77 in D
(190.4 mm L x 82.6 mm W x 45.2 mm D) At grip: 2.40 in. W x 1.44 in. D/61.2 mm x 36.8 mm MC31XXR:
8.36 in L x 3.25 in W x 1.57 in D
(212.5 mm L x 82.6 mm W x 39.9 mm D) At grip: 2.40 in. W x 1.14 in. D/61.2 mm x 29 mm MC3190G:
7.5 in L x 3.1 in W x 6.5 in D
(193 mm L x 80.8 mm W x 166 mm H) Description Item Table A-1 MC31XX Technical Specifications Physical Characteristics Dimensions Weight (including battery, stylus,and handstrap) Display Touch Panel Backlight MC31XXR (with standard battery)* - 13.4 oz (380 g) MC31XXS (with extended battery)* - 14.8 oz (420 g) MC3190G (with extended battery)* - 18.34 oz (520 g) 3.0 inch Color (TFT) (320 x 320) Display with backlight Polycarbonate analog resistive touch LED backlight A - 2 MC3000 User Guide Table A-1 MC31XX Technical Specifications (Continued) Item Battery Description Standard: Rechargeable Lithium-Ion 2740 mAh(3.7V) (for MC31XXR ) Extended Life: Rechargeable Lithium-Ion 4400 mAh(3.7V)(for MC31XXS,MC3190G) Expansion Slot User accessible (located under battery); approved for memory expansion only Network Connections High-speed USB client, full-speed USB host, Bluetooth and WiFi. USB host mode available with appropriate cables only. Notification Keypad Options Audio Performance Characteristics CPU Operating System Memory Output Power User Environment Programmable LEDs; Audio notifications 28-key Numeric Telephony 38-key Shifted Alpha (calculator-style integrated numeric keypad) 48-key Alpha-Numeric (calculator-style integrated numeric keypad) Speaker, receiver, microphone, software support for full duplex capability, Bluetooth stereo. Marvell PXA320 processor at 624 MHz Microsoft Windows CE.NET 6.0 Professional Microsoft Windows Mobile 6.1 Classic 128 MB RAM/256MB Flash or 128 MB RAM/512 MB Flash USB: 5 VDC @ 200 mA max. Operating Temperature
-20C to 50C (-4F to 122F) Storage Temperature
-20 to 50C (-4 to 122F) Charging Temperature 0 C to 40 C (32F to 104F) Humidity Drop Specification Tumble 95% non-condensing Meets and exceeds MIL-STD 810F drop specifications: 4 ft./1.2 m drop to concrete across the operating temperature range 500 1.64 ft./0.5 m tumbles (1,000 drops) at room temperature; meets and exceeds applicable MIL-STD 810F tumble specifications Electrostatic Discharge (ESD)
+/-15 kV air discharge
+/- 8 kV direct discharge
+/- 8 kV indirect discharge Sealing IP54 category 2 Technical Specifications A - 3 Table A-1 MC31XX Technical Specifications (Continued) Item Description Wireless LAN Data and Voice Communications Wireless Local Area Network
(WLAN) radio Tri-mode IEEE 802.11a/b/g Data Rates Supported 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps Operating Channels Security Chan 1-13 (2412-2472 MHz), Chan 14 (2484 MHz) Japan only; actual operating channels/frequencies depend on regulatory rules and certification agency WPA2 (Personal or Enterprise); 802.1x; EAP-TLS; TTLS (CHAP, MS-CHAP, MS-CHAPv2, PAP or MD5); PEAP (TLS, MSCHAPv2, EAP-GTC); LEAP, EAP-FAST (TLS, MS-CHAPv2, EAP-GTC); CCXv4 certified; support for IPv6; FIPS140-2 Certified Spreading Technique Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency Division Multiplexing (OFDM) Antenna Internal antenna w/diversity Voice Communication Voice-over-IP ready, Wi-Fi-certified, IEEE 802.11a/b/g direct sequence wireless LAN, Wi-Fi Multimedia (WMM), Motorola Voice Quality Manager
(VQM) Wireless PAN Data and Voice Communications Bluetooth Regulatory Electrical Safety Environmental WLAN and Bluetooth (PAN) Class II, v2.1 with Enhanced Data Rate (EDR); integrated antenna Certified to UL60950, CSA C22.2No. 60950, EN60950/IEC 950 RoHS-compliant USA: FCC Part 15.247, 15.407 Canada: RSS-210 EU: EN 300 328, EN 301 893 Japan: ARIB STD T33, T66, T70, T71 Australia: AS/NZS 4268s RF Exposure USA: FCC Part 2, FCC OET Bulletin 65 Supplement C Canada: RSS-102 EU: EN 50360 Australia: Radio communications Standard 2003 EMI/RFI Radio Version North America: FCC Part 2 (SAR), FCC Part 15, RSS210 Class B, EN 301 489-1, 489-17 Preliminary A - 4 MC3000 User Guide Table A-1 MC31XX Technical Specifications (Continued) Item EMI/RFI Batch Version Description North America: FCC Part 15, ICES 003 Class B EU: EN55022 Class B EN55024 Japan: CISPR 22, Class B Australia: AS3548 Laser Safety IEC Class2/FDA Class II in accordance with IEC60825-1/EN60825-1 Data Capture Specifications Options 1D laser scanner 2D imager Linear 1D Scanner (SE950) Specifications Optical Resolution 0.004 in. minimum element width Roll Pitch Angle Skew Tolerance Ambient Light Scan Rate Scan Angle
+/- 35 from vertical
+/- 65 from normal
+/- 50 from normal 10,000 ft. candles/107,640 lux 104 (+/- 12) scans/sec (bidirectional) 47 3 default; configurable narrow angle: 35 3 2D Imager Engine (SE4500) Specifications Field of View Optical Resolution Roll Pitch Angle Skew Tolerance Ambient Light Horizontal - 32.2 Vertical - 24.5 752 x 480 pixels 360
+/- 60 from normal
+/- 60 from normal 9,000 ft. candles (96,900 Lux) Focal Distance from Front of Engine Near: 1.6 inches Far: 15 inches Aiming Element (VLD) 655 nm +/- 10 nm Illumination Element (LED) 625 nm +/- 5 nm Motorola Interactive Sensor Technology Motion-sensor 3-axis accelerometer that enables motion-sensing applications on dynamic screen orientation, power management and free-fall detects Preliminary Table A-2 Accessory Specifications Single Slot Serial/USB Cradle Cables Four Slot Charge Only and Ethernet Cradles Technical Specifications A - 5 Four Slot Spare Battery Charger Universal Battery Charger
(UBC) Adapter Operating Temperature 32 to 122F (0 to +50C) 32 to 104F (0 to +40C) Storage Temperature
-40 to 158F (-40 to 70C) Battery Charging Temperature 32 to 104 F (0 to +40 C) ambient temperature Humidity 5% to 95% non-condensing Size (L x D x H) 4.4 in x 5.7 in x 4.7 in
(11.2 cm x 14.5 cm x 12 cm) 6 feet
(1.83 m) 18 in x 4 in x 5 in
(45.7 cm x 10.1 cm x 12 cm) Weight 0.60 lbs (0.27 kg) N/A Charge only:
2.25 lbs (1.02 kg) Ethernet:
2.38 lbs (1.08 kg) 8.25 in x 6.0 in x 1.7 in (20.96 cm x 15.24 cm x 4.32 cm) 2.5 in x 6.1 in x 1.5 in
(6.4 cm x 15.5 cm x 3.8 cm) 13.6 oz (386 g) 0.25 lbs (0.11 kg) Power Drop Electrostatic Discharge (ESD) 12V, 3.3 A 5.4V, 3 A 12V, 9 A 12V, 3.3 A 15V, 1.5 A 30 inches (76.2 centimeter) to vinyl covered concrete
+/-15 kV air discharge, +/- 8 kV direct discharge, +/- 8 kV indirect discharge Preliminary A - 6 MC3000 User Guide Preliminary Appendix B Keypads Introduction The mobile computer is available with the following keypad configurations:
28-key keypad 38-key keypad 48-key keypad. NOTE For information about using the soft keyboard input panel. For more information, see Entering Information Using the Keyboard Input Panel on page 2-15. Preliminary B - 2 MC31XX Series Mobile Computer User Guide 28-Key Keypad The 28-key keypad contains a Power button, application keys, scroll keys and function keys. The keypad is color-coded to indicate the alternate function key (blue) values and the alternate ALPHA key (orange) values. Note that keypad functions can be changed by an application so the mobile computer keypad may not function as described. See Table B-1 on page B-2 for key and button descriptions and Table B-8 on page B-14 for the keypad special functions. Figure B-1 28-Key Keypad Table B-1 28-Key Descriptions Key Description Power (red) Powers the mobile computer screen on and off (resume and suspend). Green Circle Programmable application function key by default. Red Circle Programmable application function key by default. Scan (yellow) Used in scanning applications, press to scan a bar code. This key has the same function as activating the side mounted scan buttons. Preliminary Keypads B - 3 Table B-1 28-Key Descriptions (Continued) Key Scroll Up and Down Scroll Left and Right ESC CTRL Numeric/Alpha/Special Function Description Moves up and down from one item to another. Increases/decreases specified values. Moves left and right from one item to another. Increases/decreases specified values. Produces a TAB when the blue FUNC key is activated and the right arrow key is pressed. Produces the ESC function by default. Press and release the CTRL key to activate the keypad alternate CTRL functions. The icon appears at the bottom of the screen on Windows Mobile 6.1 devices. Press and release the CTRL key again to return to the default keypad functions. icon appears on the taskbar on WinCE devices or the Numeric, alpha or special function keys. Numeric by default. Produces a special function when the blue FUNC key is activated. Produces alpha values when the orange ALPHA key is activated. In Alpha state, produces the lower case alphabetic characters on the key. Each key press produces the next alphabetic character in sequence. For example, press and release the ALPHA key and then press the 4 key once to produce the letter g; press and release the ALPHA key and then press the 4 key three times to produce the letter i. When the SHIFT key is pressed in Alpha state, the upper case alphabetic characters on the key are produced. For example, press and release the ALPHA key, press and hold the SHIFT key and then press the 4 key once to produce the letter G; press and release the ALPHA key, press and hold the SHIFT key and then press the 4 key three times to produce the letter I. Period/Decimal Point Produces a period for alpha entries and a decimal point for numeric entries by default. Produces the F10 function when the blue FUNC key is activated. Enter BKSP Executes a selected item or function. BKSP, backspace function by default. SPACE SPACE, space function by default. Preliminary B - 4 MC31XX Series Mobile Computer User Guide Table B-1 28-Key Descriptions (Continued) Key Shift ALPHA (orange) FUNC (blue) Display backlight Description Press and release the SHIFT key to activate the keypad alternate SHIFT functions. The icon appears at the bottom of the screen on Windows Mobile 6.1 devices. Press and release the SHIFT key again to return to the default keypad functions. icon appears on the taskbar on WinCE devices and the Press the orange ALPHA key to access the alternate ALPHA characters (shown on the keypad in orange). The icon appears on the taskbar on WinCE devices and the Press and release the orange ALPHA key again to return to the default keypad functions. icon appears at the bottom of the screen on Windows Mobile 6.1 devices. Press and release the blue FUNC key to activate the keypad alternate functions
(shown on the keypad in blue). The icon appears on the taskbar on WinCE devices or the icon appears at the bottom of the screen on Windows Mobile 6.1 devices. Press and release the blue FUNC key again to return to the default keypad functions. Toggles the display backlight on and off. Table B-2 28 Key Keypad Input Modes Key Numeric Mode Orange Key
(Alpha Lowercase Mode) Orange + Shift Keys
(Alpha Uppercase Mode) SHIFT
+ Key 1st Press 2nd Press 3rd Press 4th Press 1st Press 2nd Press 3rd Press 4th Press 1 2 3 4 5 6 7 8 9 0
, 1 2 3 4 5 6 7 8 9 0
b e h k n q u x
a d g j m p t w
.au
, c f i l o r v y s z
B E H K N Q U X C F I L O R V Y S Z
A D G J M P T W au
, Note: An application can change the key functions. The keypad may not function exactly as described. Preliminary Keypads B - 5 Table B-2 28 Key Keypad Input Modes (Continued) Numeric Mode Orange Key
(Alpha Lowercase Mode) Orange + Shift Keys
(Alpha Uppercase Mode) SHIFT
+ Key 1st Press 2nd Press 3rd Press 4th Press 1st Press 2nd Press 3rd Press 4th Press
_ Key
Note: An application can change the key functions. The keypad may not function exactly as described. Preliminary B - 6 MC31XX Series Mobile Computer User Guide 38-Key Keypad The 38-key keypad contains a Power button, application keys, scroll keys and function keys. The keypad is color-coded to indicate the alternate function key (blue) values. Note that keypad functions can be changed by an application so the mobile computer keypad may not function as described. See Table B-3 on page B-6 for key and button descriptions and Table B-8 on page B-14 for the keypad special functions. Figure B-2 38-Key Keypad Table B-3 38-Key Descriptions Key Description Power (red) Powers the mobile computer screen on and off (resume and suspend). Green Circle Programmable application function key by default. Red Circle Programmable application function key. Preliminary Keypads B - 7 Table B-3 38-Key Descriptions (Continued) Key Description Scan (yellow) Used in scanning applications, press to scan a bar code. Scroll Left and Right Moves left and right from one item to another by default. Produces a TAB when the blue FUNC key is activated and the right arrow key is pressed. Scroll Up and Down Moves up and down from one item to another by default. ALPHA (orange) Press the orange ALPHA key to access the alternate ALPHA characters (shown on the keypad in orange). The icon appears on the taskbar on WinCE devices and the icon appears at the bottom of the screen on Windows Mobile 6.1 devices. Press and release the orange ALPHA key again to return to the default keypad functions. CTRL Press and release the CTRL key to activate the keypad alternate CTRL functions. The icon appears on the taskbar on WinCE devices or the icon appears at the bottom of the screen on Windows Mobile 6.1 devices. Press and release the CTRL key again to return to the default keypad functions. CLEAR Clears inputs. FUNC (blue) Press and release the blue FUNC key to activate the keypad alternate functions (shown on the keypad in blue). The icon appears on the taskbar on WinCE devices or the icon appears at the bottom of the screen on Windows Mobile 6.1 devices. Press and release the blue FUNC key again to return to the default keypad functions. Numeric/Alpha/Special Function Press for the default numeric value. Produces alpha values when the orange ALPHA key is activated. BKSP/SPACE BKSP, backspace function by default. Produces the SPACE function when the orange ALPHA key is activated. SHIFT Press and release the SHIFT key to activate the keypad alternate SHIFT functions. The icon appears on the taskbar on WinCE devices and the icon appears at the bottom of the screen on Windows Mobile 6.1 devices. Press and release the SHIFT key again to return to the default keypad functions. Enter Executes a selected item or function. Preliminary B - 8 MC31XX Series Mobile Computer User Guide Table B-3 38-Key Descriptions (Continued) Key Period/Decimal Point Description Produces a period for alpha entries and a decimal point for numeric entries. Produces alpha values when the orange ALPHA key is activated. Comma Produces a comma by default. Produces alpha values when the orange ALPHA key is activated. Special Function/Alpha
. Special function by default or when the blue FUNC key is activated. Produces alpha values when the orange ALPHA key is activated. Display backlight Toggles the display backlight on and off. Table B-4 Telephony Numeric Keypad Input Modes Key Numeric Mode Orange Key
(Alpha Lowercase Mode) Orange + Shift Keys
(Alpha Uppercase Mode) SHIFT +
Key 1st Press 2nd Press 3rd Press 4th Press 1st Press 2nd Press 3rd Press 4th Press
b e h k n q u x c f i l o r v y s z 1 2 3 4 5 6 7 8 9 0
1 2 3 4 5 6 7 8 9 0
a d g j m p t w
.au
A D G J M P T W au
B E H K N Q U X C F I L O R V Y S Z Note: An application can change the key functions. The keypad may not function exactly as described. Preliminary Keypads B - 9 48-Key Keypad The 48-key keypad contains a Power button, application keys, scroll keys and function keys. The keypad is color-coded to indicate the alternate function key (blue) values. Note, that keypad functions can be changed by an application so the mobile computer keypad may not function as described. See Table B-3 on page B-6 for key and button descriptions and Table B-8 on page B-14 for the keypad special functions. Figure B-3 48-Key Keypad Table B-5 48-Key Descriptions Key Description Power (red) Powers the mobile computer screen on and off (resume and suspend). Green Circle Unassigned application function key by default. Red Circle Unassigned application function key. Scan (yellow) Scan key, used for scanning applications. Preliminary B - 10 MC31XX Series Mobile Computer User Guide Table B-5 48-Key Descriptions (Continued) Key Orange Description Press the orange key to access the alternate navigation and selection functions. The icon appears on the taskbar on WinCE devices and the the screen on Windows Mobile 6.1 devices. Press and release the orange key again to return to the default keypad functions. icon appears at the bottom of Numeric/Scroll/Select Numeric, scroll, select keys. Numeric by default. With the orange key activated, the 2, 4, 6, and 8 keys produce scroll functions and the 5 key produces a select function. With the FUNC key activated, 7 produces the ESC function and 9 produces the TAB function. Shift Press and release the SHIFT key to activate the keypad alternate SHIFT functions. The icon appears on the taskbar on WinCE devices and the icon appears at the bottom of the screen on Windows Mobile 6.1 device. Press and release the SHIFT key again to return to the default keypad functions. Enter Executes a selected item or function. BKSP/SPACE BKSP, backspace function by default. Produces the SPACE function when the blue FUNC key is activated. Period/Decimal Point Produces a period for alpha entries and a decimal point for numeric entries. Control Press and release the CTRL key to activate the keypad alternate CTRL functions. The icon appears on the taskbar on WinCE devices or the the screen on Windows Mobile 6.1 devices. Press and release the CTRL key again to return to the default keypad functions. Press and release the blue FUNC key and then the CTRL key to activate the ALT functions. The icon appears at the bottom of the screen on Windows Mobile 6.1 devices. Press and release the CTRL key two times to return to the default keypad functions. icon appears on the taskbar on WinCE devices or the icon appears at the bottom of ALT ALT Alpha/Special Function Alpha by default. Special function by default when the blue FUNC key is activated. FUNC (blue) Press and release the blue FUNC function key to activate the keypad alternate functions
(shown on the keypad in blue). The the and release the blue FUNC function key again to return to the default keypad functions. icon appears at the bottom of the screen on Windows Mobile 6.1 devices. Press icon appears on the taskbar on WinCE devices or Display Backlight Toggles the display backlight on and off. Preliminary Keypads B - 11 The MC95XX offers four types modular keypad configurations:
Alpha Primary Alpha Numeric Wide Calculator Numeric Telephony Numeric. Table B-6 Alpha Primary Keypad Input Modes Key Normal Shift + Key Orange + Key A B C D E F G H I J K L M N O P Q R S T U V W X a b c d e f g h i j k l m n o p q r s t u v w x A B C D E F G H I J K L M N O P Q R S T T V W X 1 2 3 4 5 6 7 8 9
0
au
Note: An application can change the key functions. The keypad may not function exactly as described. Preliminary B - 12 MC31XX Series Mobile Computer User Guide Table B-6 Alpha Primary Keypad Input Modes (Continued) Key Normal Shift + Key Orange + Key Y Z ENTER TAB SPACE BKSP y z Enter Tab Space Y Z Enter Tab Space Enter Back tab Space Backspace Backspace Backspace Note: An application can change the key functions. The keypad may not function exactly as described. Preliminary Keypads B - 13 Keypad Special Functions The keypad special functions are color coded on the keypads. For example, on the 38-key keypad, the display contrast icon is blue indicating that the blue function key must be selected first along with the F6 key, to increase the display contrast. Table B-7 Keypad Special Functions Icon 28-Key Keystrokes 38-Key Keystrokes 48-Key Keystrokes Special Function Blue function key and period. Blue function key and F6 Blue function key and N Increases display contrast setting, darkens the display (on monochrome units only). Blue function key and BKSP. Blue function key and F9 Blue function key and S Decreases display contrast setting, lightens the display (on monochrome units only). Blue function key and the up arrow. Blue function key and F7 Blue function key and R Increases scan decode beeper volume. Blue function key and down arrow. Blue function key and F10 Blue function key and W Decreases scan decode beeper volume. NOTE Mobile computers with color screens do not have contrast settings. Keypads The mobile computer is available with one of three keypads:
28-key keypad 38-key keypad 48-key keypad. The keypads can be selected as necessary to support specialized applications. The 28, 38 and 48-key keypads contain a Power button, application keys, scroll keys and function keys. The keypads are color-coded to indicate the alternate function key (blue) values and the alternate ALPHA key (orange) values. See Table B-8 for the special character generation. Characters can also be generated using the keyboard input panel. For more information see, Entering Information Using the Keyboard Input Panel on page 2-15. Preliminary B - 14 MC31XX Series Mobile Computer User Guide Table B-8 Special Character Generation Map Special Character 28-Key Keypad Key Sequence, Special Character Generation 38-Key Keypad Key Sequence, Special Character Generation 48-Key Keypad Key Sequence, Special Character Generation
) Use the Keyboard Input Panel*
Use the Keyboard Input Panel*
Use the Keyboard Input Panel*
Use the Keyboard Input Panel*
Use the Keyboard Input Panel*
Use the Keyboard Input Panel*
Use the Keyboard Input Panel*
Use the Keyboard Input Panel*
Use the Keyboard Input Panel*
SHIFT + 1 SHIFT + 2 SHIFT + 3 SHIFT + 4 SHIFT + 5 SHIFT + 6 SHIFT + 7 SHIFT + 8 SHIFT + 9 SHIFT + 0 Use the Keyboard Input Panel*
FUNC + 4 FUNC + 5 FUNC + 9 FUNC + 3 FUNC + 8 FUNC + 6 FUNC + 7 FUNC + 2 FUNC + T FUNC + U FUNC + Q Use the Keyboard Input Panel*
FUNC + P FUNC + V FUNC + O FUNC + Y SHIFT + FUNC + 1 Use the Keyboard Input Panel*
SHIFT + 1 SHIFT + 2 SHIFT + 3 SHIFT + 4 SHIFT + 5 SHIFT + 6 SHIFT + 7 SHIFT + 8 SHIFT + 9 or FUNC + SHIFT
+ 9 SHIFT + 1 SHIFT + 2 SHIFT + 3 SHIFT + 4 SHIFT + 5 SHIFT + 6 SHIFT + 7 SHIFT + 8 SHIFT + 9 SHIFT + 0 or FUNC + SHIFT
+ 0 SHIFT + 0 FUNC + 1 FUNC + X
* See Entering Information Using the Keyboard Input Panel on page 2-15. Preliminary Keypads B - 15 Table B-8 Special Character Generation Map (Continued) Special Character 28-Key Keypad Key Sequence, Special Character Generation 38-Key Keypad Key Sequence, Special Character Generation 48-Key Keypad Key Sequence, Special Character Generation
Use the Keyboard Input Panel*
Use the Keyboard Input Panel*
Use the Keyboard Input Panel*
Use the Keyboard Input Panel*
Use the Keyboard Input Panel*
Use the Keyboard Input Panel*
Use the Keyboard Input Panel*
Use the Keyboard Input Panel*
Use the Keyboard Input Panel*
Use the Keyboard Input Panel*
Use the Keyboard Input Panel*
Use the Keyboard Input Panel*
SHIFT + FUNC + 8 SHIFT + FUNC + 6 FUNC + SHIFT + , Use the Keyboard Input Panel*
Use the Keyboard Input Panel*
Use the Keyboard Input Panel*
FUNC + SHIFT + . SHIFT + . SHIFT + FUNC + 9 SHIFT + FUNC + 7 SHIFT + FUNC + 4 SHIFT + FUNC + 5 SHIFT + FUNC + 2 Use the Keyboard Input Panel*
Use the Keyboard Input Panel*
Use the Keyboard Input Panel*
Use the Keyboard Input Panel*
Use the Keyboard Input Panel*
N/A SHIFT + FUNC + 3 N/A
* See Entering Information Using the Keyboard Input Panel on page 2-15. Preliminary B - 16 MC31XX Series Mobile Computer User Guide Preliminary Glossary Numeric 802.11/802.11abg. A radio protocol that may be used by the WLAN radio card. A Access Point. Access Point (AP) refers to Motorolas Ethernet Access Point. It is a piece of communications equipment that manages communications between the host computer system and one or more wireless terminals. An AP connects to a wired Ethernet LAN and acts as a bridge between the Ethernet wired network and IEEE 802.11 interoperable radio-equipped mobile units, such as a mobile computer. The AP allows a mobile user to roam freely through a facility while maintaining a seamless connection to the wired network. AirBEAM Manager. AirBEAM Manager is a comprehensive wireless network management system that provides essential functions that are required to configure, monitor, upgrade and troubleshoot the wireless network and its components (including networked mobile computers). Some features include event notification, access point configuration, diagnostics, statistical reports, auto-discovery, wireless proxy agents and monitoring of access points and mobile units. AirBEAM Smart Client. AirBEAM Smart Client is part of Motorolas AirBEAM suite, which also includes AirBEAM Safe and AirBEAM Manager. The AirBEAM Smart Client system uses the network accessible host server to store software files that are to be downloaded to the mobile computers. The AirBEAM Smart Client provides the mobile computers with the smarts to request software from the host. It allows them to request, download and install software, as well as to upload files and status data. The AirBEAM Smart Client uses the industry standard FTP or TFTP file transfer protocols to check the host system for updates, and if necessary, to transfer updated software. Most often, AirBEAM Smart Client is used with wireless networks, but any TCP/IP connection can be used. For more information, refer to the AirBEAM Smart Windows CE Client Product Reference Guide (p/n 72-63060-xx). AP. See Access Point. Aperture. The opening in an optical system defined by a lens or baffle that establishes the field of view. ASCII. American Standard Code for Information Interchange. A 7 bit-plus-parity code representing 128 letters, numerals, punctuation marks and control characters. It is a standard data transmission code in the U.S. Preliminary Glossary - 2 MC31XX Series Mobile Computer User Guide B Bar. The dark element in a printed bar code symbol. Bar Code. A pattern of variable-width bars and spaces which represents numeric or alphanumeric data in machine-readable form. The general format of a bar code symbol consists of a leading margin, start character, data or message character, check character (if any), stop character, and trailing margin. Within this framework, each recognizable symbology uses its own unique format. See Symbology. Bar Code Density. The number of characters represented per unit of measurement (e.g., characters per inch). Bar Height. The dimension of a bar measured perpendicular to the bar width. Bar Width. Thickness of a bar measured from the edge closest to the symbol start character to the trailing edge of the same bar. Bit. Binary digit. One bit is the basic unit of binary information. Generally, eight consecutive bits compose one byte of data. The pattern of 0 and 1 values within the byte determines its meaning. Bits per Second (bps). Bits transmitted or received. Bit. Binary digit. One bit is the basic unit of binary information. Generally, eight consecutive bits compose one byte of data. The pattern of 0 and 1 values within the byte determines its meaning. bps. See Bits Per Second. Byte. On an addressable boundary, eight adjacent binary digits (0 and 1) combined in a pattern to represent a specific character or numeric value. Bits are numbered from the right, 0 through 7, with bit 0 the low-order bit. One byte in memory is used to store one ASCII character. boot or boot-up. The process a computer goes through when it starts. During boot-up, the computer can run self-diagnostic tests and configure hardware and software. C CDRH. Center for Devices and Radiological Health. A federal agency responsible for regulating laser product safety. This agency specifies various laser operation classes based on power output during operation. CDRH Class 1. This is the lowest power CDRH laser classification. This class is considered intrinsically safe, even if all laser output were directed into the eye's pupil. There are no special operating procedures for this class. CDRH Class 2. No additional software mechanisms are needed to conform to this limit. Laser operation in this class poses no danger for unintentional direct human exposure. Character. A pattern of bars and spaces which either directly represents data or indicates a control function, such as a number, letter, punctuation mark, or communications control contained in a message. Character Set. Those characters available for encoding in a particular bar code symbology. Preliminary Glossary - 3 Check Digit. A digit used to verify a correct symbol decode. The scanner inserts the decoded data into an arithmetic formula and checks that the resulting number matches the encoded check digit. Check digits are required for UPC but are optional for other symbologies. Using check digits decreases the chance of substitution errors when a symbol is decoded. Codabar. A discrete self-checking code with a character set consisting of digits 0 to 9 and six additional characters: (-, $,
:, /, ,, and +). Code 128. A high density symbology which allows the controller to encode all 128 ASCII characters without adding extra symbol elements. Code 3 of 9 (Code 39). A versatile and widely used alphanumeric bar code symbology with a set of 43 character types, including all uppercase letters, numerals from 0 to 9 and 7 special characters (-, ., /, +, %, $ and space). The code name is derived from the fact that 3 of 9 elements representing a character are wide, while the remaining 6 are narrow. Code 93. An industrial symbology compatible with Code 39 but offering a full character ASCII set and a higher coding density than Code 39. Code Length. Number of data characters in a bar code between the start and stop characters, not including those characters. Cold Boot. A cold boot restarts the mobile computer and erases all user stored records and entries. COM port. Communication port; ports are identified by number, e.g., COM1, COM2. Continuous Code. A bar code or symbol in which all spaces within the symbol are parts of characters. There are no intercharacter gaps in a continuous code. The absence of gaps allows for greater information density. Cradle. A cradle is used for charging the terminal battery and for communicating with a host computer, and provides a storage place for the terminal when not in use. D Dead Zone. An area within a scanner's field of view, in which specular reflection may prevent a successful decode. Decode. To recognize a bar code symbology (e.g., UPC/EAN) and then analyze the content of the specific bar code scanned. Decode Algorithm. A decoding scheme that converts pulse widths into data representation of the letters or numbers encoded within a bar code symbol. Decryption. Decryption is the decoding and unscrambling of received encrypted data. Also see, Encryption and Key. Depth of Field. The range between minimum and maximum distances at which a scanner can read a symbol with a certain minimum element width. Discrete Code. A bar code or symbol in which the spaces between characters (intercharacter gaps) are not part of the code. Preliminary Glossary - 4 MC31XX Series Mobile Computer User Guide Discrete 2 of 5. A binary bar code symbology representing each character by a group of five bars, two of which are wide. The location of wide bars in the group determines which character is encoded; spaces are insignificant. Only numeric characters (0 to 9) and START/STOP characters may be encoded. E EAN. European Article Number. This European/International version of the UPC provides its own coding format and symbology standards. Element dimensions are specified metrically. EAN is used primarily in retail. Element. Generic term for a bar or space. EMDK. Enterprise Mobility Developers Kit. Encoded Area. Total linear dimension occupied by all characters of a code pattern, including start/stop characters and data. ESD. Electro-Static Discharge ESN. Electronic Serial Number. The unique hardware number associated with a cellular device, which is transmitted to the system when the device communicates with the cellular system. Ethernet. Ethernet communication port. Allows a wired interface to a radio network. F Flash Memory. Flash memory is nonvolatile, semi-permanent storage that can be electronically erased in the circuit and reprogrammed. Mobile computers may use Flash memory to store the operating system (ROM-DOS), the terminal emulators, and the Citrix ICA Client for DOS. FTP. See File Transfer Protocol. Flash Memory. Flash memory is responsible for storing the system firmware and is non-volatile. If the system power is interrupted the data is not be lost. G Gateway Address. An IP address for a network gateway or router. A mobile computer may be part of a subnet as specified by its IP address and Netmask. It can send packets directly to any node on the same subnet. If the destination node is on a different subnet, then the terminal sends the packet to the gateway first. The gateway determines how to route the packet to the destination subnet. This field is an option used by networks that require gateways. H Hard Reset. See Cold Boot. Preliminary Glossary - 5 Hz. Hertz; A unit of frequency equal to one cycle per second. Host Computer. A computer that serves other terminals in a network, providing such services as computation, database access, supervisory programs and network control. I IEC. International Electrotechnical Commission. This international agency regulates laser safety by specifying various laser operation classes based on power output during operation. IEC (825) Class 1. This is the lowest power IEC laser classification. Conformity is ensured through a software restriction of 120 seconds of laser operation within any 1000 second window and an automatic laser shutdown if the scanner's oscillating mirror fails. Interleaved 2 of 5. A binary bar code symbology representing character pairs in groups of five bars and five interleaved spaces. Interleaving provides for greater information density. The location of wide elements (bar/spaces) within each group determines which characters are encoded. This continuous code type uses no intercharacter spaces. Only numeric (0 to 9) and START/STOP characters may be encoded. imaging scanning . Mobile computers with an integrated imager use digital camera technology to take a digital picture of a bar code, store the resulting image in memory and execute state-of-the-art software decoding algorithms to extract the data from the image. Intercharacter Gap. The space between two adjacent bar code characters in a discrete code. Interleaved Bar Code. A bar code in which characters are paired together, using bars to represent the first character and the intervening spaces to represent the second. Interleaved 2 of 5. A binary bar code symbology representing character pairs in groups of five bars and five interleaved spaces. Interleaving provides for greater information density. The location of wide elements (bar/spaces) within each group determines which characters are encoded. This continuous code type uses no intercharacter spaces. Only numeric (0 to 9) and START/STOP characters may be encoded. IP. Internet Protocol. The IP part of the TCP/IP communications protocol. IP implements the network layer (layer 3) of the protocol, which contains a network address and is used to route a message to a different network or subnetwork. IP accepts packets from the layer 4 transport protocol (TCP or UDP), adds its own header to it and delivers a datagram to the layer 2 data link protocol. It may also break the packet into fragments to support the maximum transmission unit
(MTU) of the network. IP Address. (Internet Protocol address) The address of a computer attached to an IP network. Every client and server station must have a unique IP address. A 32-bit address used by a computer on a IP network. Client workstations have either a permanent address or one that is dynamically assigned to them each session. IP addresses are written as four sets of numbers separated by periods; for example, 204.171.64.2. L LAN. Local area network. A radio network that supports data communication within a local area, such as within a warehouse of building. Preliminary Glossary - 6 MC31XX Series Mobile Computer User Guide laser scanner. A type of bar code reader that uses a beam of laser light. LASER. Light Amplification by Stimulated Emission of Radiation.The laser is an intense light source. Light from a laser is all the same frequency, unlike the output of an incandescent bulb. Laser light is typically coherent and has a high energy density. Laser Diode. A gallium-arsenide semiconductor type of laser connected to a power source to generate a laser beam. This laser type is a compact source of coherent light. LED Indicator. A semiconductor diode (LED - Light Emitting Diode) used as an indicator, often in digital displays. The semiconductor uses applied voltage to produce light of a certain frequency determined by the semiconductor's particular chemical composition. Light Emitting Diode. See LED. M MC. Mobile Computer. MIL. 1 mil = 1 thousandth of an inch. MIN. Mobile Identification Number. The unique account number associated with a cellular device. It is broadcast by the cellular device when accessing the cellular system. Misread (Misdecode). A condition which occurs when the data output of a reader or interface controller does not agree with the data encoded within a bar code symbol. Mobile Computer. In this text, mobile computer refers to the Symbol portable computer. It can be set up to run as a stand-alone device, or it can be set up to communicate with a network, using wireless radio technology. N Nominal. The exact (or ideal) intended value for a specified parameter. Tolerances are specified as positive and negative deviations from this value. Nominal Size. Standard size for a bar code symbol. Most UPC/EAN codes are used over a range of magnifications (e.g., from 0.80 to 2.00 of nominal). NVM. Non-Volatile Memory. P Parameter. A variable that can have different values assigned to it. PDT. Portable Data Terminal. Preliminary Glossary - 7 Percent Decode. The average probability that a single scan of a bar code would result in a successful decode. In a well-designed bar code scanning system, that probability should approach near 100%. Q Quiet Zone. A clear space, containing no dark marks, which precedes the start character of a bar code symbol and follows the stop character. R RAM. Random Access Memory. Data in RAM can be accessed in random order, and quickly written and read. Reflectance. Amount of light returned from an illuminated surface. Resolution. The narrowest element dimension which is distinguished by a particular reading device or printed with a particular device or method. RF. Radio Frequency. ROM. Read-Only Memory. Data stored in ROM cannot be changed or removed. Router. A device that connects networks and supports the required protocols for packet filtering. Routers are typically used to extend the range of cabling and to organize the topology of a network into subnets. See Subnet. RS232. An Electronic Industries Association (EIA) standard that defines the connector, connector pins, and signals used to transfer data serially from one device to another. S Scan Area. Area intended to contain a symbol. Scanner. An electronic device used to scan bar code symbols and produce a digitized pattern that corresponds to the bars and spaces of the symbol. Its three main components are:
1. Light source (laser or photoelectric cell) - illuminates a bar code. 2. Photodetector - registers the difference in reflected light (more light reflected from spaces). 3. Signal conditioning circuit - transforms optical detector output into a digitized bar pattern. Scanning Mode. The scanner is energized, programmed and ready to read a bar code. Scanning Sequence. A method of programming or configuring parameters for a bar code reading system by scanning bar code menus. SDK. Software Development Kit Preliminary Glossary - 8 MC31XX Series Mobile Computer User Guide Self-Checking Code. A symbology that uses a checking algorithm to detect encoding errors within the characters of a bar code symbol. Shared Key. Shared Key authentication is an algorithm where both the AP and the MU share an authentication key. SID. System Identification code. An identifier issued by the FCC for each market. It is also broadcast by the cellular carriers to allow cellular devices to distinguish between the home and roaming service. Soft Reset. See Warm Boot. Space. The lighter element of a bar code formed by the background between bars. Specular Reflection. The mirror-like direct reflection of light from a surface, which can cause difficulty decoding a bar code. Spring Radio Protocol. A radio protocol that may be used by the Symbol radio card. Symbol Radio cards that use the Spring protocol also have an Net ID. Start/Stop Character. A pattern of bars and spaces that provides the scanner with start and stop reading instructions and scanning direction. The start and stop characters are normally to the left and right margins of a horizontal code. Subnet. A subset of nodes on a network that are serviced by the same router. See Router. Subnet Mask. A 32-bit number used to separate the network and host sections of an IP address. A custom subnet mask subdivides an IP network into smaller subsections. The mask is a binary pattern that is matched up with the IP address to turn part of the host ID address field into a field for subnets. Default is often 255.255.255.0. Substrate. A foundation material on which a substance or image is placed. SVTP. Symbol Virtual Terminal Program. Symbol. A scannable unit that encodes data within the conventions of a certain symbology, usually including start/stop characters, quiet zones, data characters and check characters. Symbol Aspect Ratio. The ratio of symbol height to symbol width. Symbol Height. The distance between the outside edges of the quiet zones of the first row and the last row. Symbol Length. Length of symbol measured from the beginning of the quiet zone (margin) adjacent to the start character to the end of the quiet zone (margin) adjacent to a stop character. Symbology. The structural rules and conventions for representing data within a particular bar code type (e.g. UPC/EAN, Code 39, PDF417, etc.). T Tolerance. Allowable deviation from the nominal bar or space width. Preliminary Glossary - 9 U UPC. Universal Product Code. A relatively complex numeric symbology. Each character consists of two bars and two spaces, each of which is any of four widths. The standard symbology for retail food packages in the United States. V Visible Laser Diode (VLD). A solid state device which produces visible laser light. W WAN. Wide-Area Network. A radio network that supports data communication beyond a local area. That is, information can be sent across a city, state, or even nationwide. Warm Boot. A warm boot restarts the mobile computer by closing all running programs. All data that is not saved to flash memory is lost. Wireless Local Area Network (WLAN). See LAN. Wireless Wide Area Network (WWAN). See WAN. WNMP. (Wireless Network Management Protocol) This is Symbols proprietary MAC layer protocol used for inter access point communication and other MAC layer communication. Preliminary Glossary - 10 MC31XX Series Mobile Computer User Guide Preliminary Index Numerics 28-key keypad . B-2, B-13 2-D bar codes . 2-22 38-key keypad . B-6, B-13 48-key keypad . B-9, B-13 A accessories . 1-1 cables . 4-9 four slot charge only cradle . 4-6 LED indicators . 4-6 four slot cradles battery charging . 4-6 four slot spare battery charger battery charging . 4-8 LED indicators . 4-8 MC3000 communication/charge cables battery charging . 4-10 LED indicators . 4-10 plastic holster . 4-13, 4-15 SD card . 1-5 single slot serial/USB cradle . 4-3 battery charging . 4-3 LED indicators . 4-4 stylus . 4-2 UBC adapter battery charging . 4-11 LED indicators . 4-11 active and indicate programs . 2-2 active tasks . 2-5 ActiveSync . xvi icon . 2-9 adaptive frequency hopping . 3-1 AFH . 3-1 attaching strap/door assembly . 1-13 B bar codes two dimensional . 2-22 battery charging . 1-8 temperature range . A-5 install . 1-6 status . 2-2 battery charge status . 2-2 battery chargers four slot spare battery charger battery charging . 4-8 LED indicators . 4-8 MC3000 communication/charge cables battery charging . 4-10 LED indicators . 4-10 UBC adapter battery charging . 4-11 LED indicators . 4-11 battery charging . 1-8 backup battery . 1-8 four slot cradles . 4-6 four slot spare battery charger . 4-8 main battery . 1-8 MC3000 communication/charge cables . 4-10 battery charging . 4-10 temperature range . 1-8 UBC adapter . 4-11 battery status . 2-2, 2-3 beeper . 1-2 beeper volume . B-13 Bluetooth . 3-1 adaptive frequency hopping . 3-1 bonding . 3-38 deleting bonded device . 3-39 security . 3-2 Preliminary Index - 2 MC31XX Series Mobile Computer User Guide turning off . 3-5, 3-14, 3-21 turning on . 3-5, 3-14, 3-21 bluetooth communicating icon . 2-9 disabled icon . 2-8 discovering devices . 3-6, 3-15, 3-22 enabled icon . 2-8 icon . 2-3 turning on and off . 3-5, 3-14, 3-21 bonding Bluetooth . 3-38 boot cold . 2-27, 3-4 warm . 2-27, 3-4 bullets . xv C calibration screen . 1-10 characters, special . B-14 charge battery . 1-8 charge LED indicator . 1-2, 1-4 charging spare batteries . 1-9 temperature range . A-5 charging battery . 1-8 charging, temperature range . 1-8 cleaning . 5-1 clock, display . 2-6 cold boot . 2-27, 3-4 command bar . 2-8 icons . 2-7, 2-8 command bar icons . 2-8 communication status . 2-2 configuration . xii contrast settings . B-13 conventions notational . xv cradles four slot charge only cradle . 4-6 LED indicators . 4-6 four slot cradles battery charging . 4-6 single slot serial/USB cradle battery charging . 4-3 LED indicators . 4-4 troubleshooting . 5-9 D data capture . xii imager operational modes decode mode . 2-23 image capture mode . 2-23 pick list mode . 2-23 imaging . 2-22 scanning . 2-23 two dimensional bar codes . 2-22 DCP . xvi, 4-2 decode distances imager . 2-26 laser scanner . 2-22 decode ranges . 2-25 decode zone laser scanner 35 . 2-20 laser scanner 47 . 2-21 deleting Bluetooth bond . 3-39 demo window . 1-11, 2-1, 2-2 desktop window . 2-2 device configuration package . 4-2 Device Configuration Package, see DCP display . xii display clock . 2-6 display contrast . B-13 documentation updates . xvi documents . 2-4 E electro-static discharge email notification icon . 2-8 end task . 2-5 entering data with scanner . 2-15 entering information . 2-15 scanning . 2-15 Enterprise Mobility Developer Kit . 4-2 Enterprise Mobility Developer Kit for .NET, see EMDK ESD . 1-5 F fabric holster . 4-2, 4-15 favorites . 2-4 four slot charge only cradle . 4-1, 4-6 LED indicators . 4-6 four slot cradles . 1-8 battery charging . 4-6 four slot Ethernet cradle . 4-1 four slot spare battery charger . 1-8, 1-9, 4-1 battery charging . 4-8 LED indicators . 4-8 troubleshooting . 5-9 function status . 2-2 H hard reset . 2-26, 2-27, 3-4 headset . 2-18 Preliminary Index - 3 headset jack . 1-3 help . 2-4 holster, fabric . 4-2, 4-15 LED indicators . 4-10 MC3000R parts . 1-3 MC3000S parts . 1-3 memory . xii microphone . 1-2 mobile computer cold boot . 2-27 hard reset . 2-26, 2-27 power on . 2-1 reset . 2-26 scanning . 2-18 soft reset . 2-26 warm boot . 2-26, 2-27 Monarch printer cable . 4-1, 4-9 N navigating software . 2-1 numeric keypad I icons ActiveSync . 2-9 battery . 2-8 bluetooth . 2-3 bluetooth communicating . 2-9 bluetooth disabled . 2-8 bluetooth enabled . 2-8 connectivity . 2-8 e-mail . 2-8 instant message . 2-8 speaker . 2-7 status . 2-7, 2-8 wireless applications . 2-8 imager decode distances . 2-26 imager. See data capture, imaging imaging . 2-23 indicator LED bar . 1-2, 1-4, 4-4 information, service . xvi Preliminary 28-key . B-1, B-2, B-13 38-key . B-1, B-6, B-13 48-key . B-1, B-9, B-13 keypad configurations . B-1 keypad special functions . B-13 keypads . xii input modes . B-4, B-8, B-11 types . B-11 L laser scanning . 2-18 LEDs scan and decode . 2-23 locking the mobile computer . 2-12 Q QWERTY keypad K keypad P parts . 1-2, 1-3, 1-4, 1-5 passwords . 2-13 hint . 2-13 plastic holster . 4-2, 4-13 platform SDK . xvi power button . 2-1 power supply . 4-1 program menu . 2-4 properties . 2-5 O ONeil printer cable . 4-1, 4-9 operating environment . A-1 operating system . xii input modes . B-4, B-8 input modes . B-11 M main battery . 1-8 charging . 1-5 temperature range . A-5 inserting . 1-5 maintenance . 5-1 MC3000 communication/charge cables . 4-9 battery charging . 4-10 R radios . xii receiver . 1-2 receiver volume . B-13 remove battery . 1-11, 1-12 remove the Strap/Door Assembly . 1-13, 1-14 replace the strap/door assembly . 1-14 reset Index - 4 MC31XX Series Mobile Computer User Guide hard . 2-27, 3-4 soft . 2-27, 3-4 resetting . 2-26 resume . 3-4 rotating scan head . 1-2 rotating scan turret . 1-3 RS232 charge cable . 1-8, 4-1, 4-9 run . 2-4 S scan . 2-15 scan buttons . 1-2, 1-4 scan LED indicators . 1-2, 1-4, 2-19 scan status . 2-19 scan window . 1-3 scanning . 2-15, 2-18 adjusting the distance . 2-18 angle . 2-19 imaging . 2-22 indicator . 2-19 LED indicators . 2-19 range . 2-19 scanning considerations . 2-19 screen calibration . 1-10 contrast . B-13 SD card . 1-5 installation . 1-6 secure device card . 1-5 security Bluetooth . 3-2 serial charge cable . 1-8, 4-9 series 3000 demo window . 2-1 service . 5-1 settings . 2-4 shoulder strap . 4-15, 4-16 show clock . 2-6 single slot cradle RS232 cable . 4-1 single slot cradle USB cable . 4-1 single slot serial/USB cradle . 1-8, 1-9, 4-1, 4-3 battery charging . 4-3 LED indicators . 4-4 soft reset . 2-26, 2-27, 3-4 spare battery charging . 1-9 special characters . B-14 special functions, keypad . B-13 start menu . 2-4 starting the mobile computer . 1-5, 1-10 startup . 1-5 status . 2-7 status icon . 2-2, 2-3, 2-7 status icons . 2-7, 2-8 storing . 5-1 strap/door assembly . 1-3 attaching . 1-13 strap/door assembly removal . 1-14 stylus . 1-3, 1-9, 4-2 stylus holder . 1-3 suspend . 2-4, 3-4 synchronize with PC using Bluetooth . 3-11, 3-19 T task manager . 2-5 taskbar . 2-2 technical specifications . A-1 temperature . A-2 battery charging . A-5 Today screen . 2-7 troubleshooting . 5-5 cables . 5-10 four slot charge only cradle . 5-8 four slot spare battery charger . 5-9 mobile computer . 5-5 single slot serial/USB cradle . 5-7 UBC adapter . 5-10 turning the radios off WLAN . 1-16 U UBC adapter . 1-8, 1-9, 4-1 battery charging . 4-11 LED indicators . 4-11 UBC adapter LED indicators . 4-11 UBC adapter LED charge indications . 4-11 universal battery charger adapter . 1-8, 4-1 unpacking . 1-1 updates, documentation . xvi USB client charge cable . 1-8, 4-1, 4-9 using headset . 2-18 using stylus . 1-9 V volume . B-13 W wakeup condition settings . 1-11 wakeup conditions . 2-28 warm boot . 2-26, 2-27, 3-4 Windows CE .NET 5.0 Professional . 2-2, 2-4 Windows Mobile 6.1 . 2-7 Preliminary Index - 5 Wireless . 1-16 Wireless Manager . 1-16 wireless status . 2-8 WLAN 802.11a/b/g . xii WPAN Bluetooth . xii Z Zebra printer cable . 4-1, 4-9 Preliminary Index - 6 MC31XX Series Mobile Computer User Guide Preliminary Preliminary Motorola, Inc. One Motorola Plaza Holtsville, New York 11742, USA 1-800-927-9626 http://www.motorola.com/enterprisemobility MOTOROLA and the Stylized M Logo and Symbol and the Symbol logo are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their registered owners. Motorola, Inc. 2009 72E-124289-01 Revision 1 - August 2009 Preliminary
1 2 3 4 5 6 | UserMan Part4 | Users Manual | 1.82 MiB | September 30 2009 / November 27 2009 |
MC3100 Series Regulatory Guide Motorola reserves the right to make changes to any product to improve reliability, function, or design. Motorola does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, apparatus, machine, material, method, or process in which Motorola products might be used. An implied license exists only for equipment, circuits, and subsystems contained in Motorola products. Warranty For the complete Motorola hardware product warranty statement, go to:
http://www.motorola.com/enterprisemobility/warranty. Patents This product is covered by one or more patents. For patent information go to: http://
www.motorola.com/enterprisemobility/patents. Service Information Before you use the unit, it must be configured to operate in your facilitys network and run your applications. If you have a problem running your unit or using your equipment, contact your facilitys Technical or Systems Support. If there is a problem with the equipment, they will contact the Motorola Support Center. Motorola, Inc. One Motorola Plaza Holtsville, New York 11742, USA 1-800-927-9626 http://www.motorola.com/enterprisemobility MOTOROLA and the Stylized M Logo and Symbol and the Symbol logo are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their respective owners. Motorola, Inc. 2009 72-124293-01 Revision A August 2009 Regulatory Information This device is approved under the Enterprise Mobility business of Motorola, Inc.
(Motorola). This guide applies to the following Model Numbers: MC3100, MC3190 All Motorola devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required.
(EN) Local language translations are available at the following website: http://
www.motorola.com/enterprisemobility/support
(BP) Documentos traduzidos podem ser encontrados no site: http://
www.motorola.com/enterprisemobility/support
(DE) bersetzungen in die Landessprache sind auf der folgenden Website verfgbar: http://www.motorola.com/enterprisemobility/support
(ES) Las traducciones en diferentes idiomas estn disponibles en el sitio Web siguiente: http://www.motorola.com/enterprisemobility/support
(FR) Les versions traduites des manuels sont disponibles l'adresse suivante: http:/
/www.motorola.com/enterprisemobility/support
(HR) Lokalni jezik prevoenje jesu raspoloiv at slijedee website: http://
www.motorola.com/enterprisemobility/support
(IT) Le traduzioni nelle lingue locali sono disponibili presso il sito Web: http://
www.motorola.com/enterprisemobility/support
(JP) Web http://
www.motorola.com/enterprisemobility/support
(KO) http://www.motorola.com/enterprisemobility/support
(RU) . -: http://www.motorola.com/
enterprisemobility/support
(SC) http://www.motorola.com/
enterprisemobility/support
(TC) http://www.motorola.com/enterprisemobility/
support
(TR) Yerel dil evirileri aadaki web sitesinden bulunabilir: http://
www.motorola.com/enterprisemobility/support Any changes or modifications to Motorola equipment, not expressly approved by Motorola, could void the users authority to operate the equipment. CAUTION Only use Motorola approved and UL Listed accessories, battery packs and battery chargers. Do NOT attempt to charge damp/wet mobile computers or batteries. All components must be dry before connecting to an external power source. Bluetooth Wireless Technology This is an approved Bluetooth product. For more information or to view End Product Listing, please visit https://www.bluetooth.org/tpg/listings,cfm Wireless Device Country Approvals Regulatory markings, subject to certification, are applied to the device signifying the radio(s) is/are approved for use in the following countries: United States, Canada, Japan, China, S. Korea, Australia, and Europe 1,2 Please refer to the Motorola Declaration of Conformity (DoC) for details of other country markings. This is available at www.motorola.com/enterprisemobility/doc. Note1: For 2.4GHz or 5GHz Products: Europe includes, Austria, Belgium, Bulgaria, Czech Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Note 2: The use of RFID Devices have varying restrictions of use; please refer to the Motorola Declaration of Conformity (DoC) for details. Operation of the device without regulatory approval is illegal. Country Roaming This device incorporates the International Roaming feature (IEEE802.11d) which will ensure the product operates on the correct channels for the particular country of use. Ad-Hoc Operation Ad-Hoc operation is limited to Channels 36-48 (5150-5250 MHz). Use of this band is restricted to Indoor Use Only, any other use will make the operation of this device illegal. Frequency of Operation FCC and IC 5 GHz Only The use in the UNII (Unlicensed National Information Infrastructure) band 1 5150-
5250 MHz band is restricted to Indoor Use Only; any other use will make the operation of this device illegal. 2.4 GHz Only The available channels for 802.11 b/g operation in the US are Channels 1 to 11. The range of channels is limited by firmware. Health and Safety Recommendations Ergonomic Recommendations CAUTION In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your local Health
& Safety Manager to ensure that you are adhering to your company's safety programs to prevent employee injury. Reduce or eliminate repetitive motion Maintain a natural position Reduce or eliminate excessive force Keep objects that are used frequently within easy reach Perform tasks at correct heights Reduce or eliminate vibration Reduce or eliminate direct pressure Provide adjustable workstations Provide adequate clearance Provide a suitable working environment Improve work procedures. Safety on the Road Do not take notes or use the device while driving. Jotting down a to do list or flipping through your address book takes attention away from your primary responsibility, driving safely. When driving a car, driving is your first responsibility - Give full attention to driving. Check the laws and regulations on the use of wireless devices in the areas where you drive. Always obey them. When using a wireless device behind the wheel of a car, practice good common sense and remember the following tips:
1. Get to know your wireless device and any features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road. 2. When available, use a hands free device. 3. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be hazardous. 4. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue. 5. Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations that have the potential to divert your attention from the road. 6. Use your wireless phone to call for help. Dial the Emergency services, (9-1-1 in the US, and 1-1-2 in Europe) or other local emergency number in the case of fire, traffic accident or medical emergencies. Remember, it is a free call on your wireless phone! The call can be made regardless of any security codes and depending on a network, with or without a SIM card inserted. 7. Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call the Emergency Services, (9-1-1 in the US, and 1-1-2 in Europe) or other local emergency number, as you would want others to do for you. 8. Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-
emergency wireless number. The wireless industry reminds you to use your device / phone safely when driving. Warnings for Use of Wireless Devices Please observe all warning notices with regard to the usage of wireless devices. Safety in Aircraft Switch off your wireless device whenever you are instructed to do so by airport or airline staff. If your device offers a flight mode or similar feature, consult airline staff as to its use in flight. Safety in Hospitals Wireless devices transmit radio frequency energy and may affect medical electrical equipment. Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics or healthcare facilities. These requests are designed to prevent possible interference with sensitive medical equipment. Pacemakers Pacemaker manufacturers recommended that a minimum of 15 cm (6 inches) be maintained between a handheld wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with independent research and recommendations by Wireless Technology Research. Persons with Pacemakers:
Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker when turned ON. Should not carry the device in a breast pocket. Should use the ear furthest from the pacemaker to minimise the potential for If you have any reason to suspect that interference is taking place, turn OFF your interference. device. Other Medical Devices Please consult your physician or the manufacturer of the medical device, to determine if the operation of your wireless product may interfere with the medical device. RF Exposure Guidelines Safety Information Reducing RF Exposure Use Properly Only operate the device in accordance with the instructions supplied. International The device complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices. For information on International human exposure to electromagnetic fields refer to the Motorola/
Symbol Declaration of Conformity (DoC) at http://www.motorola.com/
enterprisemobility/doc/. EU Handheld Devices:
This device was tested for typical body-worn operation. Use only Motorola tested and approved belt-clips, holsters, and similar accessories to ensure EU Compliance. US and Canada Co-located statement To comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must not be co-located or operating in conjunction with any other transmitter/antenna except those already approved in this filling. Handheld Devices:
This device was tested for typical body-worn operation. Use only Motorola/Symbol tested and approved belt-clips, holsters, and similar accessories to ensure FCC Compliance. The use of third-party belt-clips, holsters, and similar accessories may not comply with FCC RF exposure compliance requirements, and should be avoided. Laser Devices Complies with 21CFR1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007, EN60825-1: 2007 and IEC60825-1 (Ed. 2.0) The laser classification is marked on one of the labels on the device. Class 1 Laser devices are not considered to be hazardous when used for their intended purpose. The following statement is required to comply with US and international regulations:
Caution: Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous laser light exposure. Class 2 laser scanners use a low power, visible light diode. As with any very bright light source, such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful. Laser Warning Label Class 2 Scanner Labeling Power Supply For products using an external power supply. Use only a Motorola/Symbol approved power supply. The power supply shall be Listed to UL/CSA 60950-1; and certified to IEC60950-1 and EN60950-1 with SELV outputs. Use of alternative power supply will invalidate any approval given to this device and may be dangerous. Batteries Taiwan - Recycling EPA (Environmental Protection Administration) requires dry battery producing or importing firms in accordance with Article 15 of the Waste Disposal Act are required to indicate the recycling marks on the batteries used in sales, giveaway or promotion. Contact a qualified Taiwanese recycler for proper battery disposal. Battery Information Motorola rechargeable battery packs are designed and constructed to the highest standards within the industry. However, there are limitations to how long a battery can operate or be stored before needing replacement. Many factors affect the actual life cycle of a battery pack, such as heat, cold, harsh environmental conditions and severe drops. When batteries are stored over six (6) months, some irreversible deterioration in overall battery quality may occur. Store batteries at half of full charge in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of metallic parts and electrolyte leakage. When storing batteries for one year or longer, the charge level should be verified at least once a year and charged to half of full charge. Replace the battery when a significant loss of run time is detected. Standard warranty period for all Motorola batteries is one year, regardless if the battery was purchased separately or included as part of the mobile computer or bar code scanner. For more information on Motorola batteries, please visit: http:/
mysymbolcare.symbol.com/battery/batbasics1.html Battery Safety Guidelines The area in which the units are charged should be clear of debris and combustible materials or chemicals. Particular care should be taken where the device is charged in a non commercial environment. Follow battery usage, storage, and charging guidelines found in the user's guide. Improper battery use may result in a fire, explosion, or other hazard. To charge the mobile device battery, the battery and charger temperatures must be between +32 F and +104 F (0 C and +40 C) Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present a risk of fire, explosion, leakage, or other hazard. If you have any questions about the compatibility of a battery or a charger, contact Motorola Enterprise Mobility support. For devices that utilize a USB port as a charging source, the device shall only be connected to products that bear the USB-IF logo or have completed the USB-IF compliance program. Do not disassemble or open, crush, bend or deform, puncture, or shred. Severe impact from dropping any battery-operated device on a hard surface could cause the battery to overheat. Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals. Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, or expose to fire, explosion, or other hazard. Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle or near a radiator or other heat source. Do not place battery into a microwave oven or dryer. Battery usage by children should be supervised. Please follow local regulations to promptly dispose of used re-chargeable batteries. Do not dispose of batteries in fire. Seek medical advice immediately if a battery has been swallowed. In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with large amounts of water and seek medical advice. If you suspect damage to your equipment or battery, contact Motorola Enterprise Mobility support to arrange for inspection. Use with Hearing Aids When some wireless devices are used near some hearing devices (hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise, and wireless devices also vary in the amount of interference they generate. In the event of interference you may want to consult your hearing aid supplier to discuss solutions. 1 2 3 4 Radio Frequency Interference Requirements-FCC Korea Warning Statement for Class B ITE Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help. Radio Transmitters (Part 15) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radio Frequency Interference Requirements- Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Radio Transmitters For RLAN Devices:
The use of 5 GHz RLANs, for use in Canada, have the following restrictions:
Restricted Band 5.60 5.65 GHz This device complies with RSS 210 of Industry & Science Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Label Marking: The Term IC: before the radio certification only signifies that Industry Canada technical specifications were met. Marking and European Economic Area (EEA) The use of 2.4GHz RLANs, for use through the EEA, have the following restrictions:
Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400
-2.4835 GHz. France, outside usage is restricted to 2.4 2.454 GHz. Italy requires a user license for outside usage. Bluetooth Wireless Technology for use through the EEA has the following restrictions:
Maximum radiated transmit power of 100mW EIRP in the frequency range 2.400
-2.4835 GHz France, outside usage is restricted to 10mW EIRP Italy requires a user license for outside usage. Statement of Compliance Motorola/Symbol hereby, declares that this device is in compliance with the essential requirements and other relevant provisions of Directives 1999/5/EC, 2004/108/EC and 2006/95/EC. Declaration of Conformities may be obtained from http://
www.motorola.com/enterprisemobility/doc. Japan (VCCI) - Voluntary Control Council for Interference Class B ITE B This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual B
(B )
. Other Countries Australia Use of 5GHz RLANs in Australia is restricted in the following band 5.50 5.65GHz. Brazil Declaraes Regulamentares para MC3100/3190 - Brasil Nota: A marca de certificao se aplica ao Transceptor, modelo MC3100/3190. Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Para maiores informaes sobre ANATEL consulte o site: www.anatel.gov.br Chile Este equipo cumple con la Resolucin No 403 de 2008, de la Subsecretaria de telecomunicaciones, relativa a radiaciones electromagnticas.. Mexico Restrict Frequency Range to: 2.450 2.4835 GHz. Taiwan 5.25-5.35 Korea For a radio equipment using 2400~2483.5MHz or 5725~5825MHz, the following two expression should be displayed;
. Waste Electrical and Electronic Equipment (WEEE) English: For EU Customers: All products at the end of their life must be returned to Motorola for recycling. For information on how to return product, please go to: http://
www.motorola.com/recycling/weee. Franais: Clients de l'Union Europenne: Tous les produits en fin de cycle de vie doivent tre retourns Motorola pour recyclage. Pour de plus amples informations sur le retour de produits, consultez : http://www.motorola.com/recycling/weee. Espaol: Para clientes en la Unin Europea: todos los productos debern entregarse a Motorola al final de su ciclo de vida para que sean reciclados. Si desea ms informacin sobre cmo devolver un producto, visite: http://www.motorola.com/
recycling/weee. Bulgarish: :
Motorola .
, : http://www.motorola.com/
recycling/weee. Deutsch: Fr Kunden innerhalb der EU: Alle Produkte mssen am Ende ihrer Lebensdauer zum Recycling an Motorola zurckgesandt werden. Informationen zur Rcksendung von Produkten finden Sie unter http://www.motorola.com/recycling/
weee. Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono essere restituiti a Motorola al fine di consentirne il riciclaggio. Per informazioni sulle modalit di restituzione, visitare il seguente sito Web: http://
www.motorola.com/recycling/weee. Portugus: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos Motorola para reciclagem. Para obter informaes sobre como devolver o produto, visite: http://www.motorola.com/recycling/weee. Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar Motorola te worden teruggezonden voor recycling. Raadpleeg http:/
/www.motorola.com/recycling/weee voor meer informatie over het terugzenden van producten. Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji naley zwrci do firmy Motorola w celu ich utylizacji. Informacje na temat zwrotu produktw znajduj si na stronie internetowej http://www.motorola.com/recycling/
weee. etina: Pro zkaznky z EU: Vechny produkty je nutn po skonen jejich ivotnosti vrtit spolenosti Motorola k recyklaci. Informace o zpsobu vrcen produktu najdete na webov strnce: http://www.motorola.com/recycling/weee. Eesti: EL klientidele: kik tooted tuleb nende eluea lppedes tagastada taaskasutamise eesmrgil Motorola'ile. Lisainformatsiooni saamiseks toote tagastamise kohta klastage palun aadressi: http://www.motorola.com/recycling/
weee. Magyar: Az EU-ban vsrlknak: Minden tnkrement termket a Motorola vllalathoz kell eljuttatni jrahasznosts cljbl. A termk visszajuttatsnak mdjval kapcsolatos tudnivalkrt ltogasson el a http://www.motorola.com/
recycling/weee weboldalra. Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku ivljenjske dobe vrniti podjetju Motorola za reciklao. Za informacije o vrailu izdelka obiite: http://
www.motorola.com/recycling/weee. Svenska: Fr kunder inom EU: Alla produkter som uppntt sin livslngd mste returneras till Motorola fr tervinning. Information om hur du returnerar produkten finns p http://www.motorola.com/recycling/weee. Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrtettvksi Motorola-yhtin, kun tuotetta ei en kytet. Listietoja tuotteen palauttamisesta on osoitteessa http://www.motorola.com/recycling/weee. Dansk: Til kunder i EU: Alle produkter skal returneres til Motorola til recirkulering, nr de er udtjent. Ls oplysningerne om returnering af produkter p: http://
www.motorola.com/recycling/weee.
, Motorola .
, http://www.motorola.com/recycling/weee . Malti: Gal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aar tal-ajja ta' l-uu taghom, iridu jiu rritornati gand Motorola gar-riikla. Gal aktar tagrif dwar kif gandek tirritorna l-prodott, jekk jogbok ur: http://www.motorola.com/
recycling/weee. Romnesc: Pentru clienii din UE: Toate produsele, la sfritul duratei lor de funcionare, trebuie returnate la Motorola pentru reciclare. Pentru informaii despre returnarea produsului, accesai: http://www.motorola.com/recycling/weee. Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku ivljenjske dobe vrniti podjetju Motorola za reciklao. Za informacije o vrailu izdelka obiite: http://
www.motorola.com/recycling/weee. Slovenina: Pre zkaznkov z krajn EU: Vetky vrobky musia by po uplynut doby ich ivotnosti vrten spolonosti Motorola na recyklciu. Bliie informcie o vrten vrobkov njdete na: http://www.motorola.com/recycling/weee. Lietuvi: ES vartotojams: visi gaminiai, pasibaigus j eksploatacijos laikui, turi bti grinti utilizuoti kompanij Motorola. Daugiau informacijos, kaip grinti gamin, rasite: http://www.motorola.com/recycling/weee. Latvieu: ES klientiem: visi produkti pc to kalpoanas ma beigm ir jnogd atpaka Motorola otrreizjai prstrdei. Lai iegtu informciju par produktu nogdanu Motorola, ldzu, skatiet: http://www.motorola.com/recycling/weee. Trke: AB Mterileri iin: Kullanm sresi dolan tm rnler geri dntrme iin Motorola'ya iade edilmelidir. rnlerin nasl iade edilecei hakknda bilgi iin ltfen u adresi ziyaret edin: http://www.motorola.com/recycling/weee. Turkish WEEE Statement of Compliance EEE Ynetmeliine Uygundur End-user License Agreement (Windows Mobile 6.1 Only) These license terms are an agreement between you and Motorola, Inc.
(Company). Please read them. They apply to the software included on this device. The software also includes any separate media on which you received the software. The software on this device includes software licensed by Company from Microsoft Corporation or its affiliate. The terms also apply to any:
updates, supplements, Internet-based services, and support services for this software, unless other terms accompany those items. If so, those terms apply. As described below, using some features also operates as your consent to the transmission of certain standard computer information for Internet-based services. By using the software, including use on this device, you accept these terms. If you do not accept them, do not use the device or software. Instead, contact Company to determine its return policy for a refund or credit. WARNING: If the software contains voice operated technologies, then operating this software requires user attention. Diverting attention away from the road while driving can possibly cause an accident or other serious consequence. Even occasional, short diversions of attention can be dangerous if your attention is diverted away from your driving task at a critical time. Company and Microsoft make no representations, warranties or other determinations that ANY use of this software is legal, safe, or in any manner recommended or intended while driving or otherwise operating a motor vehicle. If you comply with these license terms, you have the rights below. 1. USE RIGHTS. You may use the software on the device with which you acquired the software. 2. ADDITIONAL LICENSING REQUIREMENTS AND/OR USE RIGHTS. a.Specific Use. Company designed this device for a specific use. You may only use the software for that use. b.Included Microsoft Programs and Additional Required Licenses. Except as provided below, these license terms apply to all Microsoft programs included with the software. If the license terms with any of those programs give you other rights that do not expressly conflict with these license terms, you also have those rights. i. This agreement does not grant you any rights with respect to the Windows Mobile Device Center, Microsoft ActiveSync or Microsoft Outlook 2007 Trial which are subject to the licenses accompanying those items. c.Speech Recognition. If the software includes speech recognition component(s), you understand that speech recognition is an inherently statistical process and that recognition errors are inherent in the process. Neither Company nor Microsoft or their suppliers shall be liable for any damages arising out of errors in the speech recognition process. d.Phone Functionality. If the device software includes phone functionality, all or certain portions of the device software may be inoperable if you do not have and maintain a service account with a wireless telecommunication carrier (Mobile Operator), or if the Mobile Operators network is not operating or configured to operate with the device. 3. SCOPE OF LICENSE. The software is licensed, not sold. This agreement only gives you some rights to use the software. Company and Microsoft reserve all other rights. Unless applicable law gives you more rights despite this limitation, you may use the software only as expressly permitted in this agreement. In doing so, you must comply with any technical limitations in the software that allow you to use it only in certain ways. You may not:
work around any technical limitations in the software;
reverse engineer, decompile or disassemble the software;
make more copies of the software than specified in this agreement;
publish the software for others to copy;
rent, lease or lend the software; or use the software for commercial software hosting services. Except as expressly provided in this agreement, rights to access the software on this device do not give you any right to implement Microsoft patents or other Microsoft intellectual property in software or devices that access this device. You may use remote access technologies in the software such as Remote Desktop Mobile to access the software remotely from a computer or server. You are responsible for obtaining any licenses required for use of the protocols to access other software. 4. INTERNET-BASED SERVICES. Microsoft provides Internet-based services with the software. Microsoft may change or cancel them at any time. a.Consent for Internet-Based Services. The software features described below connect to Microsoft or service provider computer systems over the Internet. In some cases, you will not receive a separate notice when they connect. You may switch off some of these features or not use them. For more information about these features, visit http://go.microsoft.com/fwlink/?LinkId=81931. By using these features, you consent to the transmission of this information. Microsoft does not use the information to identify or contact you. Device Information. The following features use Internet protocols, which send to the appropriate systems device information, such as your Internet protocol address, the type of operating system, browser and name and version of the software you are using, and the language code of the device where you installed the software. Microsoft uses this information to make the Internet-based services available to you. Windows Mobile Update Feature. The Windows Mobile Update feature provides you the ability to obtain and install software updates on your device if updates are available. You may choose not to use this feature. Company and/
or your Mobile Operator may not support this feature or an update for your device. Windows Media Digital Rights Management. Content owners use Windows Media digital rights management technology (WMDRM) to protect their intellectual property, including copyrights. This software and third party software use WMDRM to play and copy WMDRM-protected content. If the software fails to protect the content, content owners may ask Microsoft to revoke the softwares ability to use WMDRM to play or copy protected content. Revocation does not affect other content. When you download licenses for protected content, you agree that Microsoft may include a revocation list with the licenses. Content owners may require you to upgrade WMDRM to access their content. Microsoft software that includes WMDRM will ask for your consent prior to the upgrade. If you decline an upgrade, you will not be able to access content that requires the upgrade. b.Misuse of Internet-based Services. You may not use these services in any way that could harm them or impair anyone elses use of them. You may not use the services to try to gain unauthorized access to any service, data, account or network by any means. 5. NOTICES ABOUT THE MPEG-4 VISUAL STANDARD. The software may include MPEG-4 visual decoding technology. This technology is a format for data compression of video information. MPEG LA, L.L.C. requires this notice:
USE OF THIS PRODUCT IN ANY MANNER THAT COMPLIES WITH THE MPEG-4 VISUAL STANDARD IS PROHIBITED, EXCEPT FOR USE DIRECTLY RELATED TO (A) DATA OR INFORMATION (i) GENERATED BY AND OBTAINED WITHOUT CHARGE FROM A CONSUMER NOT THEREBY ENGAGED IN A BUSINESS ENTERPRISE, AND (ii) FOR PERSONAL USE ONLY; AND (B) OTHER USES SPECIFICALLY AND SEPARATELY LICENSED BY MPEG LA, L.L.C. If you have questions about the MPEG-4 visual standard, please contact MPEG LA, L.L.C., 250 Steele Street, Suite 300, Denver, CO 80206; www.mpegla.com. 6. DIGITAL CERTIFICATES. The software uses digital certificates in X.509 format. These digital certificates are used for authentication. 7. CONNECTIVITY SOFTWARE. Your device package may include Windows Mobile Device Center or Microsoft ActiveSync software. If it is included, then you may install and use it in accordance with the license terms that are provided with it. If no license terms are provided, then you may install and use only one (1) copy of the software on a single computer. 8. NETWORK ACCESS. If you are using a network, such as an employer network, the network administrator may limit features or functionality on your device. 9. PRODUCT SUPPORT. Contact Company for support options. Refer to the support number provided with the device. 10. LINKS TO THIRD PARTY WEBSITES. If the software provides links to third party websites, those links are provided to you only as a convenience, and the inclusion of any link does not imply an endorsement of the third party website by Microsoft. 11. BACKUP COPY. You may make one backup copy of the software. You may use it only to reinstall the software on the device. 12. PROOF OF LICENSE. If you acquired the software on the device, or on a disc or other media, a genuine Certificate of Authenticity label with a genuine copy of the software identifies licensed software. To be valid, this label must be affixed to the device, or included on or in Companys software packaging. If you receive the label separately, it is not valid. You should keep the label on the device or packaging to prove that you are licensed to use the software. To identify genuine Microsoft software, see http://www.howtotell.com. 13. TRANSFER TO A THIRD PARTY. You may transfer the software only with the device, the Certificate of Authenticity label, and these license terms directly to a third party. Before the transfer, that party must agree that these license terms apply to the transfer and use of the software. You may not retain any copies of the software including the backup copy. 14. NOT FAULT TOLERANT. The software is not fault tolerant. Company installed the software on the device and is responsible for how it operates on the device. 15. RESTRICTED USE. The Microsoft software was designed for systems that do not require fail-safe performance. You may not use the Microsoft software in any device or system in which a malfunction of the software would result in foreseeable risk of injury or death to any person. This includes operation of nuclear facilities, aircraft navigation or communication systems and air traffic control. 16. NO WARRANTIES FOR THE SOFTWARE. The software is provided as is. You bear all risks of using it. Microsoft gives no express warranties, guarantees or conditions. Any warranties you receive regarding the device or the software do not originate from, and are not binding on, Microsoft or its affiliates. When allowed by your local laws, Company and Microsoft exclude implied warranties of merchantability, fitness for a particular purpose and non-infringement. 17. LIABILITY LIMITATIONS. You can recover from Microsoft and its affiliates only direct damages up to fifty U.S. Dollars (U.S. $50.00), or equivalent in local currency. You cannot recover any other damages, including consequential, lost profits, special, indirect or incidental damages. This limitation applies to:
anything related to the software, services, content (including code) on third party internet sites, or third party programs, and claims for breach of contract, breach of warranty, guarantee or condition, strict liability, negligence, or other tort to the extent permitted by applicable law. It also applies even if Microsoft should have been aware of the possibility of the damages. The above limitation may not apply to you because your country may not allow the exclusion or limitation of incidental, consequential or other damages. 18. EXPORT RESTRICTIONS. The software is subject to United States export laws and regulations. You must comply with all domestic and international export laws and regulations that apply to the software. These laws include restrictions on destinations, end users and end use. For additional information, see www.microsoft.com/exporting. Software Support Motorola Enterprise Mobility wants to ensure that customers have the latest entitled software at the time of device purchase in order to keep the device operating at peak performance levels. To confirm that your Motorola device has the latest entitled software available at the time of purchase, visit http://www.motorola.com/
enterprisemobility. Check for the latest software from Support > Enterprise Mobility Products, or search for the device and select Support > Software Downloads. If your device does not have the latest entitled software as of your device purchase date, e-mail Motorola at entitlementservices@motorola.com and ensure you include the following essential device information:
Model number Serial number Proof of purchase Title of the software download you are requesting. If it is determined by Motorola that your device is entitled to the latest version of software, as of the date you purchased your device, you will receive an e-mail containing a link directing you to a Motorola Web site to download the appropriate software. 5 6 7 8 9
1 2 3 4 5 6 | Internal Photos 1 | Internal Photos | 2.78 MiB | September 30 2009 / November 27 2009 |
CONSTRUCTION PHOTOS OF EUT Gun Type Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23
1 2 3 4 5 6 | Internal Photos 2 | Internal Photos | 2.55 MiB | September 30 2009 / November 27 2009 |
Rotating type Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43
1 2 3 4 5 6 | Internal Photos 3 | Internal Photos | 2.67 MiB | September 30 2009 / November 27 2009 |
Straight type Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64
1 2 3 4 5 6 | External Photos | External Photos | 323.92 KiB | September 30 2009 / November 27 2009 |
CONSTRUCTION PHOTOS OF EUT Gun Type Page 1 Rotating type Page 25 Straight type Page 46
1 2 3 4 5 6 | External Photos Location of Markings | External Photos | 980.10 KiB | September 30 2009 / November 27 2009 |
Engrave Mold Text Engrave Mold Text Date: 2009/08/12 Prepared by: YK Wang ASE Group USI proprietary and confidential Rotate Page 5 Page 3 Page 6 Page 4 USI proprietary and confidential Rotate USI proprietary and confidential Rotate USI proprietary and confidential Rotate USI proprietary and confidential Rotate USI proprietary and confidential Straight Page 10 Page 8 Page 9 USI proprietary and confidential Straight USI proprietary and confidential Straight USI proprietary and confidential Straight USI proprietary and confidential Gun Page 13 Page 12 USI proprietary and confidential Gun USI proprietary and confidential Gun USI proprietary and confidential Handle USI proprietary and confidential Handle USI proprietary and confidential USI proprietary and confidential
1 2 3 4 5 6 | Label | ID Label/Location Info | 228.51 KiB | September 30 2009 |
MC3190 main label for Gun type MC3190 main label for Rot type MC3190 main label for Str Type
1 2 3 4 5 6 | Power of Attorney Letter | Cover Letter(s) | 23.28 KiB | December 04 2010 |
Regulatory Engineering 24 March 2010 Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia MD 21046 Subject: FCC - Authorization to act as Agent Letter To the Commission:
We, the undersigned, hereby authorize Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf, as our agent, in the following matters related to the FCC approval of the MC3190 under FCC ID: UZ7MC3190: report submittal, related correspondence, the signing of all documents relating to these matters, and any other lawful activity necessary to obtain such certification. Any act carried out by BV CPS Taoyua within the scope of this authorization shall have the same effects as our own. Respectfully, Mark S. Luksich DMTS, Regulatory Engineering 631-738-5134 Mark.Luksich@motorola.com
1 2 3 4 5 6 | Reason for PC | Cover Letter(s) | 12.24 KiB | December 04 2010 |
FCC ID: UZ7MC3190 Description of Permissive Change This report is prepared for FCC class II permissive change. The differences compared with the original Report No.: RF980729H05 as the following addition:
l Add channel 12 and 13 test of 2.4GHz Band, which enable by the software. Reference no.: RF 980729H05B
1 2 3 4 5 6 | SAR Attestation letter | Attestation Statements | 30.58 KiB | April 14 2010 |
April 14, 2010 Regulatory Engineering Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia MD 21046 Subject: Letter of Attestation To the Commission:
We, the undersigned, attest that the (802.11 abg WLAN) radio transmitter module originally approved under FCC ID: H9P2192955 then later integrated and approved as a component in FCC ID: UZ7MC3190 is electrically identical, no changes were made to the hardware. Channel 12 (2467 MHz) and Channel 13 (2472 MHz) were enabled through a software change. The transmitter output power on these two channels is fixed at minimum power. Additional filtering was not required to maintain Band-Edge Compliance (due to the low power setting for these channels) The maximum transmit power remains unchanged so the original SAR Reports remain in effect. (At less than 12 mW (Peak Power) these two channels fall below the limit to require SAR reevaluation.) Respectfully, Mark S. Luksich DMTS, Regulatory Engineering 631-738-5134 Mark.Luksich@motorola.com Symbol Technologies, Inc. A Motorola Company One Motorola Plaza, Holtsville, NY 11742-1300 1.631.738.5134
1 2 3 4 5 6 | CIIPC | Cover Letter(s) | 16.78 KiB | November 01 2010 |
Motorola Inc. One Motorola Plaza Holtsville NY 11742-1300 USA Tel: 631-738-5134 ; Fax: 631-738-3776 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 SUBJECT: Class II Permissive Change for FCC ID: UZ7MC3190 The MC3190 Mobile Computer, was issued a grant by FCC dated 09/30/2009, under FCC ID: UZ7MC3190. The difference from previous version is to enable the VOIP function by software control. Except the difference above, the others are kept the same as previous version. Should you have any enquiries, please have my best attention. __________ Contact Person: Mark S. Luksich Company: Motorola Inc. TEL: 631-738-5134 FAX: 631-738-3776 E-mail: Mark.Luksich@motorola.com
1 2 3 4 5 6 | DOC | Cover Letter(s) | 15.82 KiB | November 01 2010 |
Motorola Inc. One Motorola Plaza Holtsville NY 11742-1300 USA Tel: 631-738-5134 ; Fax: 631-738-3776 Date: December 21, 2009 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 SUBJECT: FCC Application for FCC ID: UZ7MC3190 To Whom It May Concern:
We, Motorola Inc., hereby attest to the fact that we will apply the Declaration of Conformity procedure to the class B computer peripheral portion of this composite filing. Sincerely yours, Mark S. Luksich
1 2 3 4 5 6 | Declaration | Cover Letter(s) | 48.25 KiB | January 14 2010 |
SPORTON INTERNATIONAL INC. Declaration Date: 13 January 2010 Subject: FCC Application FCC ID: UZ7MC3190 The device, Mobile Computer, Model: MC3190 has below conditions which may cause SAR value lower. Please refer to below table:
Original Fabric Holster Materials Gaps with Body Max. Body SAR Fabric More Shorter 0.55 New Belt Clip Plastic More Longer 0.091 The SAR results for above conditions could refer to previous and current RF Exposure reports for reference. The new belt clip will have additional marketing purpose and original fabric holsters are remained. Therefore, the SAR values on the grant could be kept original version because the SAR of fabric holster is higher than new belt clip which will not be replaced from original version. In other words, not only original fabric holsters but also new belt clip will be sold and SAR results could be shown in current reports. Sincerely Yours, ______ Roy Wu / Manager Sporton International Inc. Tel: 886-3-327-3456 Ext. 604 Fax: 886-3-328-4978 Email: Roy@sporton.com.tw SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 Page Number
: 1 of 1
1 2 3 4 5 6 | Attestation Ad Hoc Declaration | Attestation Statements | 21.79 KiB | September 30 2009 |
Date:2009/9/14 Regulatory Engineering Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia MD 21046 Subject: DFS - No Ad HOC Declaration for FCC ID: UZ7MC3190 To the Commission:
We, the undersigned, attest that this device does not support Ad Hoc on non-US frequencies and/or on DFS frequencies. The client software and associated drivers will not initiate any transmission on DFS frequencies. This includes transmissions for beacon ad-hoc or peer-to-peer modes. Respectfully,
--------------------------------------------------------------------
Mark S. Luksich DMTS, Regulatory Engineering 631-738-5134 Mark.Luksich@motorola.com
1 2 3 4 5 6 | Confidentiality Request | Cover Letter(s) | 82.15 KiB | September 30 2009 |
Regulatory Engineering Date2009/9/14 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Subject: Request for Permanent Confidentiality FCC ID: UZ7MC3190 To the Commission:
Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below:
Operational Description Block Diagram Schematic Diagrams The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application Respectfully,
-------------------------------------------------------
Mark S. Luksich DMTS, Regulatory Engineering 631-738-5134 Mark.Luksich@motorola.com
1 2 3 4 5 6 | Confidentiality Request Short Term | Cover Letter(s) | 22.63 KiB | September 30 2009 |
Regulatory Engineering Date:2009/9/14 Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia MD 21046 Confidentiality Request FCC ID: UZ7MC3190 Pursuant to MC3190 of the Commissions Rules, we request short-term confidential treatment for the following information until November 26, 2009 of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device:
External Photos Test Setup Photos Users Manual Internal Photo Thank you!
Sincerely yours,
-------------------------------------------------------
Mark S. Luksich DMTS, Regulatory Engineering 631-738-5134 Mark.Luksich@motorola.com SYMBOL TECHNOLOGIES, INC. One Symbol Plaza, Holtsville, NY 11742-1300 516-738-2400 Website: http://www.symbol.com Symbol Technologies, Inc., a wholly owned subsidiary of Motorola, Inc.
1 2 3 4 5 6 | Power of Attorney Letter | Cover Letter(s) | 21.03 KiB | September 30 2009 |
Regulatory Engineering Date:2009/9/14 Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia MD 21046 Subject: FCC - Authorization to act as Agent Letter To the Commission:
We, the undersigned, hereby authorize Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf, as our agent, in the following matters related to the FCC approval of the MC3190 under FCC ID: UZ7MC3190:
report submittal, related correspondence, the signing of all documents relating to these matters, and any other lawful activity necessary to obtain such certification. Any act carried out by BV CPS Taoyua within the scope of this authorization shall have the same effects as our own. Respectfully, Mark S. Luksich DMTS, Regulatory Engineering 631-738-5134 Mark.Luksich@motorola.com
1 2 3 4 5 6 | Coverletter Lab PBA FCC response | Cover Letter(s) | 64.99 KiB | September 30 2009 |
steve.cheng From:
Sent:
To:
Subject:
Attachments:
amanda@adt.com.tw Thursday, September 17, 2009 5:02 AM steve.cheng@nacsemc.com; amy.cheng@nacsemc.com UZ7MC3190 : Response to Inquiry to FCC (Tracking Number 305445) 0909.pdf; 0909.pdf Dear Steve, Pls. refer to the attached e-mail and files from Gary. Amanda Chu
----- Amanda Chu/ADT 2009/09/17 07:59 -----
Gary Chang/ADT (/) Amanda Chu/ADT@ADT 2009/09/15 11:39 Fw : Fw : Response to Inquiry to FCC (Tracking Number 305445) Dear amanda :
980729H05 FCC Steve
----- Gary Chang/ADT 2009/09/15 11:13 -----
oetech@fccsun27w.fcc.gov 2009/09/14 10:23 gary_chang@adt.com.tw Response to Inquiry to FCC (Tracking Number 305445) FCC Home | Search | Updates | E-Filing | Initiatives | For Consumers | Find People Office of Engineering and Technology Inquiry:
1
---Reply from Customer on 09/09/2009---
Dear sir :
Sorry to bother you again. Information of EUT has been upload to FCC website, please check 0909.pdf. Q1 : Simultaneous transmission SAR Can we follow KDB 447498 item 4) d) to evaluate Simultaneous transmission SAR of body position for this product ?
The simultaneous transmission SAR evaluation procedures for cellphones in KDB 648474 may be applied to antennas that are built-in within a PDA or UMPC. Q2: Peak SAR location of body position EUT will put into holder to do SAR test at body position. Since holder has a thickness of 2~3 cm and output power of Bluetooth is smaller than 4 dBm, so SAR of Bluetooth is very small and pattern is unclear. How can we do to find Peak SAR location if it is necessary?
Thanks for your kindly reply. Response:
9/14/09 First category: Radio Frequency Exposure - MPE; SAR Second category: Portable - Part 2.1093 Third category: Non-handset SAR Subject: Questions about RF exposure A1) for this device OK to apply KDB 648474 to determine SAR evaluation requirements A2) if BT is not subject to stand-alone SAR, for purposes of KDB 648484 analysis BT SAR = 0
- see e.g. Oct08 FCC-TCB conference notes Harrington (attached) Oct08 Harrington Oct08 Harrington REPLACE USE THIS ONE 2 Do not reply to this message. Please select the Reply to an Inquiry Response link from the OET Inquiry System to add any additional information pertaining to this inquiry. 3
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2010-04-14 | 5745 ~ 5825 | DTS - Digital Transmission System | Class II permissive change or modification of presently authorized equipment |
2 | 2010-01-14 | 5500 ~ 5700 | NII - Unlicensed National Information Infrastructure TX | |
3 | 5745 ~ 5825 | DTS - Digital Transmission System | ||
4 | 2009-09-30 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
5 | 5745 ~ 5825 | DTS - Digital Transmission System | ||
6 | 5500 ~ 5700 | NII - Unlicensed National Information Infrastructure TX |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 4 5 6 | Effective |
2010-04-14
|
||||
1 2 3 4 5 6 |
2010-01-14
|
|||||
1 2 3 4 5 6 |
2009-09-30
|
|||||
1 2 3 4 5 6 | Applicant's complete, legal business name |
Zebra Technologies Corporation
|
||||
1 2 3 4 5 6 | FCC Registration Number (FRN) |
0015642663
|
||||
1 2 3 4 5 6 | Physical Address |
1 Zebra Plaza
|
||||
1 2 3 4 5 6 |
Holtsville, New York 11742
|
|||||
1 2 3 4 5 6 |
Holtsville, NY
|
|||||
1 2 3 4 5 6 |
United States
|
|||||
app s | TCB Information | |||||
1 2 3 4 5 6 | TCB Application Email Address |
h******@americantcb.com
|
||||
1 2 3 4 5 6 |
c******@telefication.com
|
|||||
1 2 3 4 5 6 |
c******@curtis-straus.com
|
|||||
1 2 3 4 5 6 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 3 4 5 6 | Grantee Code |
UZ7
|
||||
1 2 3 4 5 6 | Equipment Product Code |
MC3190
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 4 5 6 | Name |
L****** Z********
|
||||
1 2 3 4 5 6 | Title |
Regulatory Specialist
|
||||
1 2 3 4 5 6 | Telephone Number |
346-2********
|
||||
1 2 3 4 5 6 | Fax Number |
631-6********
|
||||
1 2 3 4 5 6 |
L******@zebra.com
|
|||||
app s | Technical Contact | |||||
1 2 3 4 5 6 | Firm Name |
Sporton International Inc.
|
||||
1 2 3 4 5 6 |
Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
|
|||||
1 2 3 4 5 6 | Name |
R**** W******
|
||||
1 2 3 4 5 6 |
E**** L****
|
|||||
1 2 3 4 5 6 | Physical Address |
No.52, HwaYa 1st Rd., Kwei-Shan Hsiang
|
||||
1 2 3 4 5 6 |
81-1 Luliaoken, 9th Lin, Wulung Tsuen Chiunglin
|
|||||
1 2 3 4 5 6 |
Taoyuan Hsien, 333
|
|||||
1 2 3 4 5 6 |
Hsinchu, 307
|
|||||
1 2 3 4 5 6 |
Taiwan
|
|||||
1 2 3 4 5 6 | Telephone Number |
+886-********
|
||||
1 2 3 4 5 6 |
886-3******** Extension:
|
|||||
1 2 3 4 5 6 | Fax Number |
+886-********
|
||||
1 2 3 4 5 6 |
886-3********
|
|||||
1 2 3 4 5 6 |
R******@sporton.com.tw
|
|||||
1 2 3 4 5 6 |
e******@adt.com.tw
|
|||||
app s | Non Technical Contact | |||||
1 2 3 4 5 6 | Firm Name |
Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
|
||||
1 2 3 4 5 6 | Name |
E****** L********
|
||||
1 2 3 4 5 6 | Physical Address |
81-1 Luliaoken, 9th Lin, Wulung Tsuen Chiunglin
|
||||
1 2 3 4 5 6 |
Hsinchu, 307
|
|||||
1 2 3 4 5 6 |
Taiwan
|
|||||
1 2 3 4 5 6 | Telephone Number |
886-3******** Extension:
|
||||
1 2 3 4 5 6 | Fax Number |
886-3********
|
||||
1 2 3 4 5 6 |
e******@adt.com.tw
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 3 4 5 6 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 2 3 4 5 6 | Yes | |||||
1 2 3 4 5 6 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 2 3 4 5 6 | Yes | |||||
1 2 3 4 5 6 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 11/27/2009 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 4 5 6 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 4 5 6 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 3 4 5 6 | NII - Unlicensed National Information Infrastructure TX | |||||
1 2 3 4 5 6 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 3 4 5 6 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Mobile Computer | ||||
1 2 3 4 5 6 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes | ||||
1 2 3 4 5 6 | No | |||||
1 2 3 4 5 6 | Modular Equipment Type | Does not apply | ||||
1 2 3 4 5 6 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
1 2 3 4 5 6 | Original Equipment | |||||
1 2 3 4 5 6 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 4 5 6 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 4 5 6 | Grant Comments | Output power is conducted. Collocated transmitter operating configurations have been evaluated as described in this filing; other collocation configurations require separate evaluation. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to the specific belt-clips/holsters/accessories tested for this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported body SAR value is 0.55 W/kg. The highest reported head SAR value is 0.334 W/kg. This Permissive change adds Channels 12 and 13 to the operating frequencies of this device. Power out on channel 12 may not exceed 1.7mW in DBPSK (DSSS) modulation mode and 11.7mW in BPSK (OFDM) modulation mode. Power out on Channel 13 may not exceed 1.8mW in DBPSK modulation mode and 11.2mW in BPSK modulation mode. | ||||
1 2 3 4 5 6 | Output power is conducted. Collocated transmitter operating configurations have been evaluated as described in this filing; other collocation configurations require separate evaluation. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to the specific belt-clips/holsters/accessories tested for this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported body SAR value is 0.55 W/kg. The highest reported head SAR value is 0.334 W/kg. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. | |||||
1 2 3 4 5 6 | Output power is conducted. Collocated transmitter operating configurations have been evaluated as described in this filing; other collocation configurations require separate evaluation. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to the specific belt-clips/holsters/accessories tested for this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported body SAR value is 0.55 W/kg. The highest reported head SAR value is 0.334 W/kg. | |||||
1 2 3 4 5 6 | Output power is conducted. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter, except as evaluated in this composite filing. End users must be informed of the body worn requirements for satisfying RF exposure compliance. | |||||
1 2 3 4 5 6 | Output power is conducted. Collocated transmitter operating configurations have been evaluated as described in this filing; other collocation configurations require separate evaluation. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to the specific belt-clips/holsters/accessories tested for this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported body SAR value is 0.55 W/kg. | |||||
1 2 3 4 5 6 | Output power is conducted. Collocated transmitter operating configurations have been evaluated as described in this filing; other collocation configurations require separate evaluation. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to the specific belt-clips/holsters/accessories tested for this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. The highest reported body SAR value is 0.55 W/kg. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. | |||||
1 2 3 4 5 6 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 4 5 6 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 4 5 6 | Firm Name |
Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
|
||||
1 2 3 4 5 6 |
SPORTON International Inc.
|
|||||
1 2 3 4 5 6 |
Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
|
|||||
1 2 3 4 5 6 | Name |
R******** C******
|
||||
1 2 3 4 5 6 |
A**** C****
|
|||||
1 2 3 4 5 6 | Telephone Number |
886-3******** Extension:
|
||||
1 2 3 4 5 6 |
886-2******** Extension:
|
|||||
1 2 3 4 5 6 |
886-2********
|
|||||
1 2 3 4 5 6 |
886-3********
|
|||||
1 2 3 4 5 6 | Fax Number |
886-3********
|
||||
1 2 3 4 5 6 |
886-2********
|
|||||
1 2 3 4 5 6 |
886-2********
|
|||||
1 2 3 4 5 6 |
886-3********
|
|||||
1 2 3 4 5 6 |
r******@tw.bureauveritas.com
|
|||||
1 2 3 4 5 6 |
a******@sporton.com.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2412 | 2472 | 0.166 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15C | CC | 5745 | 5825 | 0.128 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15E | CC ND | 5180 | 5240 | 0.018 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15E | CC ND | 5260 | 5320 | 0.029 | |||||||||||||||||||||||||||||||||||
2 | 3 | 15E | CC ND | 5500 | 5700 | 0.022 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC | 2412 | 2462 | 0.166 | |||||||||||||||||||||||||||||||||||
3 | 2 | 15C | CC | 5745 | 5825 | 0.128 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0020000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
5 | 1 | 15C | CC | 2412 | 2462 | 0.166 | |||||||||||||||||||||||||||||||||||
5 | 2 | 15C | CC | 5745 | 5825 | 0.128 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
6 | 1 | 15E | CC ND | 5180 | 5240 | 0.018 | |||||||||||||||||||||||||||||||||||
6 | 2 | 15E | CC ND | 5260 | 5320 | 0.029 | |||||||||||||||||||||||||||||||||||
6 | 3 | 15E | CC ND | 5500 | 5700 | 0.022 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC