FCC ID: UZ7MC32N0 Mobile Computer

MC32N0 SERIES REGULATORY GUIDE Zebra reserves the right to make changes to any product to improve reliability, function, or design. Zebra does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, apparatus, machine, material, method, or process in which Zebra products might be used. An implied license exists only for equipment, circuits, and subsystems contained in Zebra products. Warranty For the complete Zebra hardware product warranty statement, go to:

http://www.zebra.com/warranty. Service Information If you have a problem using the equipment, contact your facilitys Technical or Systems Support. If there is a problem with the equipment, they will contact the Zebra Global Customer Support at:

http://www.zebra.com/support. For the latest version of this guide go to:

http://www.zebra.com/support. Zebra Technologies Corporation Lincolnshire, IL 60069, U.S.A. http://www.zebra.com Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. 2016 Symbol Technologies LLC, a subsidiary of Zebra Technologies Corporation. All rights reserved. MN000216A05 Rev. A - May 2016 For user information, refer to the MC3200 User Guide available at http:\\www.zebra.com\support. Regulatory Information This guide applies to Model Number MC32N0. All Zebra devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Local language translations are available at the following website: http://www.zebra.com/support. Any changes or modifications to Zebra equipment, not expressly approved by Zebra, could void the user's authority to operate the equipment. Antennas: Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could cause damage and may violate regulations. CAUTION Only use Zebra approved and UL Listed accessories, battery packs and battery chargers. Do NOT attempt to charge damp/wet mobile computers or batteries. All components must be dry before connecting to an external power source. Declared maximum operating temperature: 50C. Radio Modules The device contains approved radio module. The module is identified below. Zebra radio module supporting WLAN 802.11 a/b/

g/n and Bluetooth. Type: 21-148603-0B. Bluetooth Wireless Technology This is an approved Bluetooth product. For more information or to view the End Product Listing, please visit http://www.bluetooth.org/tpg/listings.cfm. Wireless Device Country Approvals Regulatory markings, subject to certification, are applied to the device signifying the radio(s) is/are approved for use in the following countries: United States, Canada, Japan, China, S. Korea, Australia, and Europe. Please refer to the Declaration of Conformity (DoC) for details of other country markings. This is available at http://www.zebra.com/doc. Note: Europe includes, Austria, Belgium, Bulgaria, Croatia, Czech Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Operation of the device without regulatory approval is illegal. Country Roaming This device incorporates the International Roaming feature (IEEE802.11d) which will ensure the product operates on the correct channels for the particular country of use. Ad-Hoc Operation (2.4 GHz band) Ad-Hoc operation is limited to Channels 1 - 11 (2412 -

2462 MHz). Frequency of Operation - IC Industry Canada Statement:

Caution: The device for the band 5150 - 5250 MHz is only for indoor usage to reduce potential for harmful interference to co-Channel mobile satellite systems. High power radars are allocated as primary users

(meaning they have priority) of 5250 - 5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices. Avertissement: Le dispositive fonctionnant dans la bande 5150 - 5250 MHz est rserv uniquement pour une utilisation l'intrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. Les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., qu'ils ont la priorit) pour les bands 5250 - 5350 MHz et 5650 -

5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-

EL. Health and Safety Recommendations Ergonomic Recommendations CAUTION In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your local Health &

Safety Manager to ensure that you are adhering to your companys safety programs to prevent employee injury. Reduce or eliminate repetitive motion Maintain a neutral posture Reduce or eliminate excessive force Keep objects that are used frequently within easy reach Perform tasks at correct heights Reduce or eliminate vibration Reduce or eliminate direct pressure Provide adjustable workstations Provide adequate clearance Provide a suitable working environment Safety on the Road Do not take notes or use the device while driving. Jotting down a to do list or flipping through your address book takes attention away from your primary responsibility, driving safely. Improve work procedures. When driving a car, driving is your first responsibility -

Give full attention to driving. Check the laws and regulations on the use of wireless devices in the areas where you drive. Always obey them. When using a wireless device behind the wheel of a car, practice good common sense and remember the following tips:

1. Get to know your wireless device and any features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road. 2. When available, use a hands free device. 3. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be hazardous. 4. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue. 5. Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations that have the potential to divert your attention from the road. 6. Use your wireless phone to call for help. Dial the Emergency services, (9-1-1 in the US, and 1-1-2 in Europe) or other local emergency number in the case of fire, traffic accident or medical emergencies. Remember, it is a free call on your wireless phone! The call can be made regardless of any security codes and depending on a network, with or without a SIM card inserted. 7. Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call the Emergency Services, (9-1-1 in the US, and 1-1-2 in Europe) or other local emergency number, as you would want others to do for you. 8. Call roadside assistance or a special non-

emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-

emergency wireless number. The wireless industry reminds you to use your device

/ phone safely when driving. Warnings for Use of Wireless Devices Please observe all warning notices with regard to the usage of wireless devices. Potentially Hazardous Atmospheres -

Vehicles Use You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants etc. and areas where the air contains chemicals or particles (such as grain, dust, or metal powders) and any other area where you would normally be advised to turn off your vehicle engine. Safety in Aircraft Switch off your wireless device whenever you are instructed to do so by airport or airline staff. If your device offers a 'flight mode' or similar feature, consult airline staff as to its use in flight. Safety in Hospitals Wireless devices transmit radio frequency energy and may affect medical electrical equipment. Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics or healthcare facilities. These requests are designed to prevent possible interference with sensitive medical equipment. Pacemakers Pacemaker manufacturers recommended that a minimum of 15 cm (6 inches) be maintained between a handheld wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with independent research and recommendations by Wireless Technology Research. Persons with pacemakers:

Should ALWAYS keep the device more than 15 cm

(6 inches) from their pacemaker when turned ON. Should not carry the device in a breast pocket. Should use the ear furthest from the pacemaker to minimize the potential for interference. If you have any reason to suspect that interference is taking place, turn OFF your device. Other Medical Devices Please consult your physician or the manufacturer of the medical device, to determine if the operation of your wireless product may interfere with the medical device. RF Exposure Guidelines Safety Information Reducing RF Exposure - Use Properly Only operate the device in accordance with the instructions supplied. International The device complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices. For information on International human exposure to electromagnetic fields refer to the Zebra Declaration of Conformity (DoC) at http://www.zebra.com/doc. For further information on the safety of RF energy from wireless devices - see http://www.zebra.com/corporateresponsibility located under Wireless Communications and Health. Europe Handheld Devices This device was tested for typical body-worn operation. Use only Zebra tested and approved belt-

clips, holsters, and similar accessories to ensure EU Compliance. US and Canada Co-located Statement To comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must not be co-located or operating in conjunction with any other transmitter/antenna except those already approved in this filing. Handheld Devices This device was tested for typical body-worn operation. Use only Zebra tested and approved belt-

clips, holsters, and similar accessories to ensure FCC/

IC Compliance. The use of third-party belt-clips, holsters, and similar accessories may not comply with FCC/IC RF exposure compliance requirements, and should be avoided. Priphriques portables Cet appareil a t test dans le cadre d'une utilisation typique, c'est-dire plac contre le corps. N'utilisez que des clips de ceinture, des tuis et autres accessoires similaires qui ont t tests et approuvs par Zebra afin de respecter les critres de conformit de la FCC /IC. Les clips de ceinture, les tuis et les accessoires proposs par des socits tierces peuvent ne pas respecter les critres de conformit de la FCC/IC, ils doivent donc tre vits. Laser Devices Class 2 laser scanners use a low power, visible light diode. As with any very bright light source, such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful. The following statement is required to comply with US and international regulations. Caution: Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous laser light exposure. Scanner Labeling 1 2 1 2 1 3 3 2 1 3 Labels Read:

1. LASER LIGHT-DO NOT STARE INTO BEAM. CLASS 2 LASER PRODUCT 2. CAUTION-CLASS 2 LASER LIGHT WHEN OPEN. DO NOT STARE INTO THE BEAM 3. COMPLIES WITH 21 CFR1040.10 AND 1040.11 EXCEPT FOR DEVIATIONS PURSUANT TO LASER NOTICE NO. 50, DATED JUNE 24, 2007, AND IEC/EN 60825-1:2007 and/or EN60825-

1:2015. LED Compliance Statement Classified as EXEMPT RISK GROUP according to IEC 62471:2006 and EN 62471:2008. Pulse duration for SE4750 is 1.7 ms. Pulse duration for SE4500 is 6.67 ms. Batteries Taiwan - Recycling EPA (Environmental Protection Administration) requires dry battery producing or importing firms in accordance with Article 15 of the Waste Disposal Act are required to indicate the recycling marks on the batteries used in sales, giveaway or promotion. Contact a qualified Taiwanese recycler for proper battery disposal. Battery Information CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of batteries according to instructions. Use only Zebra approved batteries. Accessories which have battery charging capability are approved for use with the following battery models:

82-000011-01 (3.7 VDC, 2740 mAh) 82-000012-01 (3.7 VDC, 4800 mAh) Zebra rechargeable battery packs are designed and constructed to the highest standards within the industry. However, there are limitations to how long a battery can operate or be stored before needing replacement. Many factors affect the actual life cycle of a battery pack, such as heat, cold, harsh environmental conditions and severe drops. When batteries are stored over six (6) months, some irreversible deterioration in overall battery quality may occur. Store batteries at half of full charge in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of metallic parts and electrolyte leakage. When storing batteries for one year or longer, the charge level should be verified at least once a year and charged to half of full charge. Replace the battery when a significant loss of run time is detected. Standard warranty period for all Zebra batteries is one year, regardless if the battery was purchased separately or included as part of the mobile computer. For more information on Zebra batteries, please visit:

http://www.zebra.com/batterybasics Battery Safety Guidelines The area in which the units are charged should be clear of debris and combustible materials or chemicals. Particular care should be taken where the device is charged in a non commercial environment. Follow battery usage, storage, and charging guidelines found in the user's guide. Improper battery use may result in a fire, explosion, or other hazard. To charge the mobile device battery, the battery and charger temperatures must be between 0 C and +40 C (+32 F and +104 F) Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present a risk of fire, explosion, leakage, or other hazard. If you have any questions about the compatibility of a battery or a charger, contact Zebra Global Customer Support. Do not disassemble or open, crush, bend or deform, puncture, or shred. Severe impact from dropping any battery-operated device on a hard surface could cause the battery to overheat. Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals. Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, or expose to fire, explosion, or other hazard. Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle or near a radiator or other heat source. Do not place battery into a microwave oven or dryer. Battery usage by children should be supervised. Please follow local regulations to promptly dispose of used re-chargeable batteries. Do not dispose of batteries in fire. Seek medical advice immediately if a battery has been swallowed. In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with large amounts of water and seek medical advice. If you suspect damage to your equipment or battery, contact Zebra Global Customer Support to arrange for inspection. Use with Hearing Aids When some wireless devices are used near some hearing devices (hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise, and wireless devices also vary in the amount of interference they generate. In the event of interference you may want to consult your hearing aid supplier to discuss solutions. Hearing Aid Compatibility This device does not support Voice Over IP (VOIP) calls. Radio Frequency Interference Requirements-FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help. Radio Transmitters (Part 15) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Radio Frequency Interference Requirements - Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Radio Transmitters For RLAN Devices:

This device complies with RSS 210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Label Marking: The Term IC: before the radio certification only signifies that Industry Canada technical specifications were met. Marking and European Economic Area

(EEA) The use of 2.4 GHz RLAN's, for use through the EEA, have the following restrictions:

Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 - 2.4835 GHz. Bluetooth Wireless Technology for use through the EEA has the following restrictions:

Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 - 2.4835 GHz. Statement of Compliance Zebra hereby declares that this radio equipment is in compliance with Directive 2011/65/EU and 1999/5/EC or 2014/53/EU (2014/53/EU supersedes 1999/5/EC from 13th June 2017). The full text of the EU Declaration of Conformity is available at the following internet address: http://www.zebra.com/doc. Japan (VCCI) - Voluntary Control Council for Interference Class B ITE B Korea Warning Statement for Class B ITE B

(

)

(B )

,

. Other Countries Australia Use of 5 GHz RLAN's in Australia is restricted in the following band 5.60 - 5.65GHz. Brazil Declaraes Regulamentares para MC32N0 - Brazil Nota: A marca de certificao se aplica ao Transceptor, modelo MC32N0. Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Para maiores informaes sobre ANATEL consulte o site: www.anatel.gov.br. Este equipamento opera em carter secundrio, isto

, no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Este produto est homologado pela Anatel, de acordo com os procedimentos regulamentados pela Resoluo n242/2000 e atende aos requisitos tcnicos aplicados, incluindo os limites de exposio da Taxa de Absoro Especfica referente a campos eltricos, magnticos e eletromagnticos de radiofrequncia, de acordo com as Resolues n 303/2002 e 533/2009. Este dispositivo est em conformidade com as diretrizes de exposio radiofrequncia quando posicionado pelo menos 0 centmetros de distncia do corpo. Para maiores informaes, consulte o site da Anatel. Chile Este equipo cumple con la Resolucin No 403 de 2008, de la Subsecretaria de telecomunicaciones, relativa a radiaciones electromagnticas. China Hong Kong In accordance with HKTA1039, the band 5.15 GHz -

5.35 GHz is for indoor operation only. Mexico Restrict Frequency Range to: 2.450 - 2.4835 GHz. La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. South Korea

. Taiwan 5.25 - 5.35 Ukraine 1057, 2008

. Thailand

. Waste Electrical and Electronic Equipment (WEEE) English: For EU Customers: All products at the end of their life must be returned to Zebra for recycling. For information on how to return product, please go to:

http://www.zebra.com/weee Franais : Clients de l'Union Europenne : Tous les produits en fin de cycle de vie doivent tre retourns Zebra pour recyclage. Pour de plus amples informations sur le retour de produits, consultez : http:/

/www.zebra.com/weee. Espaol: Para clientes en la Unin Europea: todos los productos debern entregarse a Zebra al final de su ciclo de vida para que sean reciclados. Si desea ms informacin sobre cmo devolver un producto, visite:

http://www.zebra.com/weee.

: :

Zebra .

,

:

http://www.zebra.com/weee. Deutsch: Fr Kunden innerhalb der EU: Alle Produkte mssen am Ende ihrer Lebensdauer zum Recycling an Zebra zurckgesandt werden. Informationen zur Rcksendung von Produkten finden Sie unter http://

www.zebra.com/weee. Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono essere restituiti a Zebra al fine di consentirne il riciclaggio. Per informazioni sulle modalit di restituzione, visitare il seguente sito Web:

http://www.zebra.com/weee. Portugus: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos Zebra para reciclagem. Para obter informaes sobre como devolver o produto, visite:

http://www.zebra.com/weee. Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar Zebra te worden teruggezonden voor recycling. Raadpleeg http://www.zebra.com/weee voor meer informatie over het terugzenden van producten. Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji naley zwrci do firmy Zebra w celu ich utylizacji. Informacje na temat zwrotu produktw znajduj si na stronie internetowej http://

www.zebra.com/weee. etina: Pro zkaznky z EU: Vechny produkty je nutn po skonen jejich ivotnosti vrtit spolenosti Zebra k recyklaci. Informace o zpsobu vrcen produktu najdete na webov strnce: http://

www.zebra.com/weee. Eesti: EL klientidele: kik tooted tuleb nende eluea lppedes tagastada taaskasutamise eesmrgil Zebra'ile. Lisainformatsiooni saamiseks toote tagastamise kohta klastage palun aadressi: http://

www.zebra.com/weee. Magyar: Az EU-ban vsrlknak: Minden tnkrement termket a Zebra vllalathoz kell eljuttatni jrahasznosts cljbl. A termk visszajuttatsnak mdjval kapcsolatos tudnivalkrt ltogasson el a http://www.zebra.com/weee weboldalra. Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku ivljenjske dobe vrniti podjetju Zebra za reciklao. Za informacije o vrailu izdelka obiite:

http://www.zebra.com/weee. Svenska: Fr kunder inom EU: Alla produkter som uppntt sin livslngd mste returneras till Zebra fr tervinning. Information om hur du returnerar produkten finns p http://www.zebra.com/weee. Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrtettvksi Zebra-

yhtin, kun tuotetta ei en kytet. Listietoja tuotteen palauttamisesta on osoitteessa http://

www.zebra.com/weee. Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til recirkulering, nr de er udtjent. Ls oplysningerne om returnering af produkter p: http://

www.zebra.com/weee.

: ..: ,

, Zebra .

, http://

www.zebra.com/weee . Malti: Gal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aar tal-ajja ta' l-uu taghom, iridu jiu rritornati gand Zebra gar-riikla. Gal aktar tagrif dwar kif gandek tirritorna l-prodott, jekk jogbok ur: http://

www.zebra.com/weee. Slovenina: Pre zkaznkov z krajn EU: Vetky vrobky musia by po uplynut doby ich ivotnosti vrten spolonosti Zebra na recyklciu. Bliie informcie o vrten vrobkov njdete na: http://

www.zebra.com/weee. Lietuvi: ES vartotojams: visi gaminiai, pasibaigus j eksploatacijos laikui, turi bti grinti utilizuoti kompanij Zebra. Daugiau informacijos, kaip grinti gamin, rasite: http://www.zebra.com/weee. Latvieu: ES klientiem: visi produkti pc to kalpoanas ma beigm ir jnogd atpaka Zebra otrreizjai prstrdei. Lai iegtu informciju par produktu nogdanu Zebra, ldzu, skatiet: http://

www.zebra.com/weee. TURKISH WEEE Statement of Compliance EEE Ynetmeliine Uygundur Software Support Zebra wants to ensure that customers have the latest release of entitled software at the time of product purchase. To confirm that your Zebra device shipped with the latest release of entitled software, visit:

www.zebra.com/support. Check for the latest software from Software Downloads > Product Line/Product >

Go. If your device does not have the latest entitled software release as of your product purchase date, please e-mail a request to Zebra at:

entitlementservices@zebra.com. You must include the following essential device information with your request:

Model number Serial number Proof of purchase Title of the software download you are requesting. If it is determined by Zebra that your device is entitled to the latest software release, you will receive an e-

mail containing a link directing you to a Zebra web site to download the appropriate software. Open Source Software Information For instructions on how to obtain a copy of any source code being made Open Source by Zebra related to software used in this Zebra Product you may send your request in writing to:

Zebra Technologies Corporation Open Source Software Management One Zebra Plaza Holtsville, NY 11742-1300, U.S.A. In your request, please include the Zebra Product Name and Version, along with the Open Source Software specifics, such as the Open Source Software Name and Version. Note, the source code for the Open Source Software may be resident on the Zebra Product Installation Media, or on supplemental Zebra Product Media. Please reference and review the entire Zebra Open Source Software Legal Notices and End User License Agreement for the details on location and methods of obtaining the source code. Note, dependent on the license terms of the Open Source Software, source code may not be provided. Please reference and review the entire Zebra Open Source Software Legal Notices and End User License Agreement for identifying which Open Source Software Packages will have source code provided. To view additional information regarding licenses, acknowledgments and required copyright notices for open source packages used in this Zebra product, touch Settings > About phone > Legal information

> Open source licenses. End User License Agreement IMPORTANT PLEASE READ CAREFULLY: This End User License Agreement (EULA) is a legal agreement between you (either an individual or a single entity) (Licensee) and Zebra International Holdings Corporation (Zebra) for software, owned by Zebra and its affiliated companies and its third party suppliers and licensors, that accompanies this EULA, which includes machine-readable instructions used by a processor to perform specific operations other than machine-readable instructions used for the sole purpose of booting hardware during a startup sequence (Software). BY USING THE SOFTWARE, YOU ACKNOWLEDGE ACCEPTANCE OF THE TERMS OF THIS EULA. IF YOU DO NOT ACCEPT THESE TERMS, DO NOT USE THE SOFTWARE. 1. GRANT OF LICENSE. Zebra grants you, End-User Customer, the following rights provided that you comply with all terms and conditions of this EULA: For Software associated with Zebra hardware, Zebra hereby grants you a limited, personal, non-exclusive license during the term of this Agreement to use the Software solely and exclusively for your internal use in support of the operation of your associated Zebra hardware and for no other purpose. To the extent that any portion of the Software is provided to you in a manner that is designed to be installed by you, you may install one copy of the installable Software on one hard disk or other device storage for one printer, computer, workstation, terminal, controller, access point or other digital electronic device, as applicable

(an Electronic Device), and you may access and use that Software as installed on that Electronic Device so long as only one copy of such Software is in operation. For a standalone Software application, you may install, use, access, display and run only the number of copies of the Software to which you are entitled. You may make one copy of the Software in machine readable form for backup purposes only, provided that the backup copy must include all copyright or other proprietary notices contained on the original. In the absence of a support contract, you are entitled, for a period of ninety (90) days from when the instance of Software (or hardware including the Software) are first shipped by Zebra or downloaded by End-User Customer, to obtain, if available, updates, from Zebra and operational technical support, not including implementation, integration or deployment support

(Entitlement Period). You may not obtain updates from Zebra after the Entitlement Period, unless covered by a Zebra support contract or other written agreement with Zebra. Certain items of the Software may be subject to open source licenses. The open source license provisions may override some of the terms of this EULA. Zebra makes the applicable open source licenses available to you on a Legal Notices readme file available on your device and/or in System Reference guides or in Command Line Interface (CLI) Reference guides associated with certain Zebra products. 1.1 Authorized Users. For a standalone Software application, the licenses granted are subject to the condition that you ensure the maximum number of authorized users accessing and using the Software either alone or concurrently is equal to the number of user licenses for which you are entitled to use either through a Zebra channel partner member or Zebra. You may purchase additional user licenses at any time upon payment of the appropriate fees to the Zebra channel partner member or Zebra. 1.2 Software Transfer. You may only transfer this EULA and the rights to the Software or updates granted herein to a third party in connection with the support or sale of a device which the Software accompanied or in connection with a standalone Software application during the Entitlement Period or as covered by a Zebra support contract. In such event, the transfer must include all of the Software (including all component parts, the media and printed materials, any upgrades, and this EULA) and you may not retain any copies of the Software. The transfer may not be an indirect transfer, such as a consignment. Prior to the transfer, the end user receiving the Software must agree to all the EULA terms. If Licensee is purchasing Zebra Products and licensing Software for end use by a U.S. Government end user, Licensee may transfer such Software license, but only if: (i) Licensee transfers all copies of such Software to the U.S. Government end user or to an interim transferee, and

(ii) Licensee has first obtained from the transferee (if applicable) and ultimate end user an enforceable end user license agreement containing restrictions substantially identical to the ones contained in this Agreement. Except as stated in the foregoing, Licensee and any transferee(s) authorized by this provision may not otherwise use or transfer or make available any Zebra software to any third party nor permit any party to do so. 2. RESERVATION OF RIGHTS AND OWNERSHIP. Zebra reserves all rights not expressly granted to you in this EULA. The Software is protected by copyright and other intellectual property laws and treaties. Zebra or its suppliers own the title, copyright and other intellectual property rights in the Software. The Software is licensed, not sold. 3. LIMITATIONS ON END USER RIGHTS. You may not reverse engineer, decompile, disassemble, or otherwise attempt to discover the source code or algorithms of, the Software (except and only to the extent that such activity is expressly permitted by applicable law not withstanding this limitation), or modify, or disable any features of, the Software, or create derivative works based on the Software. You may not rent, lease, lend, sublicense or provide commercial hosting services with the Software. 4. CONSENT TO USE OF DATA. You agree that Zebra and its affiliates may collect and use technical information gathered as part of the product support services related to the Software provided to you that does not personally identify you. Zebra and its affiliates may use this information solely to improve their products or to provide customized services or technologies to you. At all times your information will be treated in accordance with Zebra's Privacy Policy, which can be viewed at: http://www.zebra.com. 5. LOCATION INFORMATION. The Software may enable you to collect location-based data from one or more client devices which may allow you to track the actual location of those client devices. Zebra specifically disclaims any liability for your use or misuse of the location-based data. You agree to pay all reasonable costs and expenses of Zebra arising from or related to third party claims resulting from your use of the location-based data. 6. SOFTWARE RELEASES. During the Entitlement Period, Zebra or Zebra's channel partner members may make available to you software releases as they become available after the date you obtain your initial copy of the Software. This EULA applies to all and any component of the release that Zebra may make available to you after the date you obtain your initial copy of the Software, unless Zebra provides other license terms along with such release. To receive Software provided through the release, you must first be licensed for the Software identified by Zebra as entitled to the release. We recommend that you periodically check availability of a Zebra support contract to ensure that you are entitled to receive any available Software releases. Some features of the Software may require you to have access to the internet and may be subject to restrictions imposed by your network or internet provider. 7. EXPORT RESTRICTIONS. You acknowledge that the Software is subject to export restrictions of various countries. You agree to comply with all applicable international and national laws that apply to the Software, including all the applicable export restriction laws and regulations. 8. ASSIGNMENT. You may not assign this Agreement or any of your rights or obligations hereunder (by operation of law or otherwise) without the prior written consent of Zebra. Zebra may assign this Agreement and its rights and obligations without your consent. Subject to the foregoing, this Agreement shall be binding upon and inure to the benefit of the parties to it and their respective legal representatives, successors and permitted assigns. 9. TERMINATION. This EULA is effective until terminated. Your rights under this License will terminate automatically without notice from Zebra if you fail to comply with any of the terms and conditions of this EULA. Zebra may terminate this Agreement by offering you a superseding Agreement for the Software or for any new release of the Software and conditioning your continued use of the Software or such new release on your acceptance of such superseding Agreement. Upon termination of this EULA, you must cease all use of the Software and destroy all copies, full or partial, of the Software. 10. DISCLAIMER OF WARRANTY. UNLESS SEPARATELY STATED IN A WRITTEN EXPRESS LIMITED WARRANTY, ALL SOFTWARE PROVIDED BY ZEBRA IS PROVIDED AS IS AND ON AN AS AVAILABLE BASIS, WITHOUT WARRANTIES OF ANY KIND FROM ZEBRA, EITHER EXPRESS OR IMPLIED. TO THE FULLEST EXTENT POSSIBLE PURSUANT TO APPLICABLE LAW, ZEBRA DISCLAIMS ALL WARRANTIES EXPRESS, IMPLIED, OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY, SATISFACTORY QUALITY OR WORKMANLIKE EFFORT, FITNESS FOR A PARTICULAR PURPOSE, RELIABILITY OR AVAILABILITY, ACCURACY, LACK OF VIRUSES, NON INFRINGEMENT OF THIRD PARTY RIGHTS OR OTHER VIOLATION OF RIGHTS. ZEBRA DOES NOT WARRANT THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR FREE. TO THE EXTENT THAT THE SOFTWARE COVERED BY THIS EULA INCLUDES EMULATION LIBRARIES, SUCH EMULATION LIBRARIES DO NOT WORK 100% CORRECTLY OR COVER 100% OF THE FUNCTIONALITY BEING EMULATED, ARE OFFERED AS IS AND WITH ALL FAULTS, AND ALL THE DISCLAIMERS AND LIMITATIONS CONTAINED IN THIS PARAGRAPH AND THIS AGREEMENT APPLY TO SUCH EMULATION LIBRARIES. SOME JURISDICTIONS DO NOT ALLOW EXCLUSIONS OR LIMITATIONS OF IMPLIED WARRANTIES, SO THE ABOVE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. NO ADVICE OR INFORMATION, WHETHER ORAL OR WRITTEN, OBTAINED BY YOU FROM ZEBRA OR ITS AFFILIATES SHALL BE DEEMED TO ALTER THIS DISCLAIMER BY ZEBRA OF WARRANTY REGARDING THE SOFTWARE, OR TO CREATE ANY WARRANTY OF ANY SORT FROM ZEBRA. 11. THIRD-PARTY APPLICATIONS. Certain third party applications may be included with, or downloaded with this Software. Zebra makes no representations whatsoever about any of these applications. Since Zebra has no control over such applications, you acknowledge and agree that Zebra is not responsible for such applications. You expressly acknowledge and agree that use of third party applications is at your sole risk and that the entire risk of unsatisfactory quality, performance, accuracy and effort is with you. You agree that Zebra shall not be responsible or liable, directly or indirectly, for any damage or loss, including but not limited to any damage to or loss of data, caused or alleged to be caused by, or in connection with, use of or reliance on any such third party content, products, or services available on or through any such application. You acknowledge and agree that the use of any third-party application is governed by such third party application provider's Terms of Use, License Agreement, Privacy Policy, or other such agreement and that any information or personal data you provide, whether knowingly or unknowingly, to such third-party application provider, will be subject to such third party application provider's privacy policy, if such a policy exists. ZEBRA DISCLAIMS ANY RESPONSIBILITY FOR ANY DISCLOSURE OF INFORMATION OR ANY OTHER PRACTICES OF ANY THIRD PARTY APPLICATION PROVIDER. ZEBRA EXPRESSLY DISCLAIMS ANY WARRANTY REGARDING WHETHER YOUR PERSONAL INFORMATION IS CAPTURED BY ANY THIRD PARTY APPLICATION PROVIDER OR THE USE TO WHICH SUCH PERSONAL INFORMATION MAY BE PUT BY SUCH THIRD PARTY APPLICATION PROVIDER. 12. LIMITATION OF LIABILITY. ZEBRA WILL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND ARISING OUT OF OR RELATING TO THE USE OR THE INABILITY TO USE THE SOFTWARE OR ANY THIRD PARTY APPLICATION, ITS CONTENT OR FUNCTIONALITY, INCLUDING BUT NOT LIMITED TO DAMAGES CAUSED BY OR RELATED TO ERRORS, OMISSIONS, INTERRUPTIONS, DEFECTS, DELAY IN OPERATION OR TRANSMISSION, COMPUTER VIRUS, FAILURE TO CONNECT, NETWORK CHARGES, IN-APP PURCHASES, AND ALL OTHER DIRECT, INDIRECT, SPECIAL, INCIDENTAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES EVEN IF ZEBRA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. NOTWITHSTANDING THE FOREGOING, ZEBRA'S TOTAL LIABILITY TO YOU FOR ALL LOSSES, DAMAGES, CAUSES OF ACTION, INCLUDING BUT NOT LIMITED TO THOSE BASED ON CONTRACT, TORT, OR OTHERWISE, ARISING OUT OF YOUR USE OF THE SOFTWARE OR THIRD PARTY APPLICATIONS, OR ANY OTHER PROVISION OF THIS EULA, SHALL NOT EXCEED THE FAIR MARKET VALUE OF THE SOFTWARE OR AMOUNT PURCHASER PAID SPECIFICALLY FOR THE SOFTWARE. THE FOREGOING LIMITATIONS, EXCLUSIONS, AND DISCLAIMERS (INCLUDING SECTIONS 10, 11, 12, AND 15) SHALL APPLY TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, EVEN IF ANY REMEDY FAILS ITS ESSENTIAL PURPOSE. 13. INJUNCTIVE RELIEF. You acknowledge that, in the event you breach any provision of this Agreement, Zebra will not have an adequate remedy in money or damages. Zebra shall therefore be entitled to obtain an injunction against such breach from any court of competent jurisdiction immediately upon request without posting bond. Zebra's right to obtain injunctive relief shall not limit its right to seek further remedies. 14. MODIFICATION. No modification of this Agreement shall be binding unless it is in writing and is signed by an authorized representative of the party against whom enforcement of the modification is sought. 15. U.S. GOVERNMENT END USERS RESTRICTED RIGHTS. This provision only applies to U.S. Government end users. The Software is a

"commercial item" as that term is defined at 48 C.F.R. Part 2.101, consisting of commercial computer software and computer software documentation as such terms are defined in 48 C.F.R. Part 252.227-

7014(a)(1) and 48 C.F.R. Part 252.227-7014(a)(5), and used in 48 C.F.R. Part 12.212 and 48 C.F.R. Part 227.7202, as applicable. Consistent with 48 C.F.R. Part 12.212, 48 C.F.R. Part 252.227-7015, 48 C.F.R. Part 227.7202-1 through 227.7202-4, 48 C.F.R. Part 52.227-19, and other relevant sections of the Code of Federal Regulations, as applicable, the Software is distributed and licensed to U.S. Government end users (a) only as a commercial item, and (b) with only those rights as are granted to all other end users pursuant to the terms and conditions contained herein. 16. APPLICABLE LAW. This EULA is governed by the laws of the state of Illinois, without regard to its conflict of law provisions. This EULA shall not be governed by the UN Convention on Contracts for the International Sale of Goods, the application of which is expressly excluded. CMM Disclosure

(Parts)

) b P

(

) g H

(

) d C

(

)

) I V

(

r C

(

) B B P

(

) E D B P O

(

O O O O O X X O O O O O O O O O O O O O O O O

(Metal Parts)

(Circuit Modules)

(Cables and Cable Assemblies)

(Plastic and Polymeric Parts)

(Optics and Optical Components)

(Batteries) SJ/T 11364 O:

GB/T 26572 X:

GB/T 26572 (

This table was created to comply with China RoHS requirements. O O O O O O O O O O O O

MC32N0 Mobile Computer User Guide with Android v5.1.1 MN-003006-02 REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY MC32N0 WITH ANDROID V5.1.1 USER GUIDE MN-003006-02 Rev. A March 2017 REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY ii MC32N0 User Guide with Android v5.1.1 No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from Zebra. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice. The software is provided strictly on an as is basis. All software, including firmware, furnished to the user is on a licensed basis. Zebra grants to the user a non-transferable and non-exclusive license to use each software or firmware program delivered hereunder (licensed program). Except as noted below, such license may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of Zebra. No right to copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with other program material, create a derivative work from a licensed program, or use a licensed program in a network without written permission from Zebra. The user agrees to maintain Zebras copyright notice on the licensed programs delivered hereunder, and to include the same on any authorized copies it makes, in whole or in part. The user agrees not to decompile, disassemble, decode, or reverse engineer any licensed program delivered to the user or any portion thereof. Zebra reserves the right to make changes to any software or product to improve reliability, function, or design. Zebra does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any Zebra Technologies Corporation, intellectual property rights. An implied license only exists for equipment, circuits, and subsystems contained in Zebra products. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY iii Revision History Changes to the original guide are listed below:

Change Rev A

-02 Date 3/1/17 Initial release. 3/20/17 Update Android Screenshots Description REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY iv MC32N0 User Guide with Android v5.1.1 REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY TABLE OF CONTENTS Revision History ................................................................................................................................. iii About This Guide Introduction ........................................................................................................................................ 7 Documentation Set....................................................................................................................... 7 Configurations.................................................................................................................................... 8 Software Versions........................................................................................................................ 8 Chapter Descriptions ......................................................................................................................... 8 Notational Conventions...................................................................................................................... 9 Icon Conventions ............................................................................................................................... 9 Related Documents ......................................................................................................................... 10 Service Information ................................................................................................................................ 10 Chapter 1: Getting Started Introduction .................................................................................................................................... 1-1 MC32N0G Features ..................................................................................................................... 1-1 MC32N0R Features ..................................................................................................................... 1-4 Rotating Scan Turret ................................................................................................................ 1-7 MC32N0S Features ..................................................................................................................... 1-7 Unpacking .................................................................................................................................... 1-10 Setup ............................................................................................................................................ 1-10 Installing a microSD Card ...................................................................................................... 1-10 Installing the MC32N0-G Battery ........................................................................................... 1-12 Installing the MC32N0R/S Battery ....................................................................................... 1-13 Charging the Battery .............................................................................................................. 1-14 Charging Temperature ..................................................................................................... 1-15 Charging Spare Batteries ................................................................................................. 1-15 Replacing the MC32N0-G Battery ............................................................................................... 1-15 Replacing the MC32N0-R/S Battery ............................................................................................ 1-18 Battery Management .................................................................................................................... 1-20 Monitor Battery Usage ........................................................................................................... 1-20 Low Battery Notification ......................................................................................................... 1-21 Battery Optimization ............................................................................................................... 1-21 REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 2 MC32N0 User Guide with Android v5.1.1 Battery Optimization ..................................................................................................................... 1-22 Connecting a Wired Headset ....................................................................................................... 1-22 Using a Bluetooth Headset .......................................................................................................... 1-23 Real-Time Clock Backup ............................................................................................................. 1-23 Setting the Date and Time ........................................................................................................... 1-23 Display Setting ............................................................................................................................. 1-23 Setting the Screen Brightness ................................................................................................ 1-24 Changing the Screen Timeout Setting ................................................................................... 1-24 Setting Font Size .......................................................................................................................... 1-24 General Sounds Setting ............................................................................................................... 1-25 Sound ..................................................................................................................................... 1-25 Notification ............................................................................................................................. 1-27 Chapter 2: Using the MC32N0 Introduction .................................................................................................................................... 2-1 Home Screen ................................................................................................................................. 2-1 Status Bar ................................................................................................................................ 2-2 Status Icons ....................................................................................................................... 2-2 Notification Icons ................................................................................................................ 2-4 Managing Notifications ............................................................................................................. 2-5 Quick Settings .......................................................................................................................... 2-6 Application Shortcuts and Widgets .......................................................................................... 2-6 Adding an Application or Widget to the Home Screen ....................................................... 2-6 Moving Items on the Home Screen .................................................................................... 2-7 Removing an App or Widget from the Home Screen ......................................................... 2-7 Folders ........................................................................................................................................... 2-7 Creating Folders ....................................................................................................................... 2-7 Naming Folders ........................................................................................................................ 2-7 Removing a Folder ................................................................................................................... 2-8 Home Screen Wallpaper ................................................................................................................ 2-8 Change the Home Screen Wallpaper ...................................................................................... 2-8 Using the Touchscreen .................................................................................................................. 2-8 Using the On-screen Keyboard ...................................................................................................... 2-9 Editing Text .............................................................................................................................. 2-9 Entering Numbers, Symbols and Special Characters .............................................................. 2-9 Applications .................................................................................................................................... 2-9 Accessing Applications .......................................................................................................... 2-11 Switching Between Recent Applications ................................................................................ 2-12 Un-Locking the Screen ................................................................................................................ 2-12 Single User Mode ................................................................................................................... 2-13 MultiUser Mode ...................................................................................................................... 2-14 MultiUser Login ................................................................................................................ 2-14 MultiUser Logout .............................................................................................................. 2-15 Resetting the Device .................................................................................................................... 2-15 Performing a Soft Reset ......................................................................................................... 2-15 Performing a Hard Reset ....................................................................................................... 2-15 Suspend Mode ............................................................................................................................. 2-16 REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Table of Contents 3 Chapter 3: Applications Introduction .................................................................................................................................... 3-1 Battery Manager ............................................................................................................................ 3-1 File Browser ................................................................................................................................... 3-2 Contacts ......................................................................................................................................... 3-3 Adding Contacts ....................................................................................................................... 3-3 Editing Contacts ....................................................................................................................... 3-3 Deleting Contacts ..................................................................................................................... 3-3 Gallery ............................................................................................................................................ 3-3 Working with Albums ................................................................................................................ 3-4 Share an Album ................................................................................................................. 3-5 Get Album Information ....................................................................................................... 3-5 Deleting an Album .............................................................................................................. 3-5 Working with Photos ................................................................................................................ 3-5 Viewing and Browsing Photos ............................................................................................ 3-6 Cropping a Photo ............................................................................................................... 3-6 Setting a Photo as a Contact Icon ...................................................................................... 3-7 Get Photo Information ........................................................................................................ 3-7 Share a Photo .................................................................................................................... 3-7 Deleting a Photo ................................................................................................................. 3-8 Working with Videos ................................................................................................................. 3-8 Watching Videos ................................................................................................................ 3-8 Sharing a Video .................................................................................................................. 3-8 Deleting a Video ................................................................................................................. 3-9 DataWedge Demonstration ............................................................................................................ 3-9 MLog Manager ............................................................................................................................. 3-10 Sound Recorder ........................................................................................................................... 3-10 PTT Express Voice Client ............................................................................................................ 3-11 PTT Audible Indicators ........................................................................................................... 3-11 Notification Icons .................................................................................................................... 3-12 Enabling PTT Communication ............................................................................................... 3-13 PTT Communication .............................................................................................................. 3-13 Creating a Group Call ...................................................................................................... 3-13 Responding with a Private Response .............................................................................. 3-13 Disabling PTT Express Voice Client Communication ...................................................... 3-13 Chapter 4: Data Capture Introduction .................................................................................................................................... 4-1 Imager ............................................................................................................................................ 4-1 Operational Modes ................................................................................................................... 4-1 Laser Scanner ................................................................................................................................ 4-2 RS507 Hands-Free Imager ............................................................................................................ 4-2 Scanning Considerations ............................................................................................................... 4-2 Bar Code Capture with Imager ...................................................................................................... 4-3 Bar Code Capture with Laser Scanner .......................................................................................... 4-4 Bar Code Capture with RS507 Hands-Free Imager ...................................................................... 4-5 Pairing the RS507 Hands-Fee Imager Using SSI .................................................................... 4-6 Pairing the RS507 Hands-Free Imager Bluetooth HID ............................................................ 4-7 DataWedge .................................................................................................................................... 4-7 REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 4 MC32N0 User Guide with Android v5.1.1 Enabling DataWedge ............................................................................................................... 4-8 Disabling DataWedge .............................................................................................................. 4-8 Chapter 5: Wireless Introduction .................................................................................................................................... 5-1 Wireless Local Area Networks ....................................................................................................... 5-1 Configuring a Wi-Fi Network .................................................................................................... 5-3 Manually Adding a Wi-Fi Network ............................................................................................ 5-4 Configuring for a Proxy Server ................................................................................................. 5-5 Configuring the Device to Use a Static IP Address .................................................................. 5-6 Advanced Wi-Fi Settings .......................................................................................................... 5-7 Additional Settings ................................................................................................................... 5-8 Remove a Wi-Fi Network ......................................................................................................... 5-9 Bluetooth ...................................................................................................................................... 5-10 Adaptive Frequency Hopping ................................................................................................. 5-10 Security .................................................................................................................................. 5-10 Bluetooth Profiles ................................................................................................................... 5-11 Bluetooth Power States .......................................................................................................... 5-11 Bluetooth Radio Power .......................................................................................................... 5-11 Enabling Bluetooth ........................................................................................................... 5-11 Disabling Bluetooth .......................................................................................................... 5-12 Discovering Bluetooth Device(s) ............................................................................................ 5-12 Changing the Bluetooth Name ............................................................................................... 5-12 Connecting to a Bluetooth Device .......................................................................................... 5-13 Selecting Profiles on the Bluetooth Device ............................................................................ 5-13 Unpairing a Bluetooth Device ................................................................................................. 5-13 Chapter 6: Accessories Introduction .................................................................................................................................... 6-1 MC32N0 Accessories .................................................................................................................... 6-1 Battery Adapter .............................................................................................................................. 6-4 Installing the Battery Adapter ................................................................................................... 6-5 Removing the Battery Adapter ................................................................................................. 6-6 Single Slot Serial/USB Cradle ........................................................................................................ 6-7 Charging the MC32N0 Battery ................................................................................................. 6-7 Charging an MC32N0 Spare Battery ....................................................................................... 6-8 Battery Charging in Single Slot Serial/USB Cradle .................................................................. 6-8 Charging Temperature ....................................................................................................... 6-9 Four Slot Charge Only Cradle ...................................................................................................... 6-10 Charging the MC32N0 Battery ............................................................................................... 6-10 Battery Charging in the Four Slot Charge Only Cradle .......................................................... 6-10 Charging Temperature ..................................................................................................... 6-11 Four Slot Spare Battery Charger ................................................................................................. 6-11 Battery Charging .................................................................................................................... 6-12 Spare Battery Charging .................................................................................................... 6-12 Charging Temperature ..................................................................................................... 6-13 Magnetic Stripe Reader ............................................................................................................... 6-13 Installing the MSR .................................................................................................................. 6-13 REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Table of Contents 5 Using the MSR ....................................................................................................................... 6-13 Removing the MSR ................................................................................................................ 6-14 MC32N0 Cables ........................................................................................................................... 6-14 Universal Battery Charger Adapter .............................................................................................. 6-15 Charging a Spare Battery in the UBC Adapter ....................................................................... 6-15 UBC Adapter Battery Charging .............................................................................................. 6-16 Spare Battery Charging .................................................................................................... 6-16 Plastic Holster .............................................................................................................................. 6-17 Fabric Holster ............................................................................................................................... 6-18 Belt Clip .................................................................................................................................. 6-19 Shoulder Strap ....................................................................................................................... 6-19 Using the Belt Clip .................................................................................................................. 6-20 Using the Shoulder Strap ....................................................................................................... 6-22 Chapter 7: Maintenance and Troubleshooting Introduction .................................................................................................................................... 7-1 Maintaining the MC32N0 ............................................................................................................... 7-1 Battery Safety Guidelines .............................................................................................................. 7-2 Cleaning Instructions ..................................................................................................................... 7-2 Approved Cleanser Active Ingredients ..................................................................................... 7-3 Harmful Ingredients .................................................................................................................. 7-3 Cleaning Instructions ................................................................................................................ 7-3 Special Cleaning Notes ............................................................................................................ 7-3 Cleaning Materials Required .................................................................................................... 7-3 Cleaning Frequency ................................................................................................................. 7-3 Cleaning the MC32N0 .................................................................................................................... 7-4 Housing .................................................................................................................................... 7-4 Display ..................................................................................................................................... 7-4 Exit Window ............................................................................................................................. 7-4 Connector Cleaning ................................................................................................................. 7-4 Cleaning Cradle Connectors .......................................................................................................... 7-4 Troubleshooting the MC32N0 ........................................................................................................ 7-5 Chapter 8: Technical Specifications Introduction .................................................................................................................................... 8-1 MC32N0 Technical Specifications ................................................................................................. 8-1 Chapter 9: MC32N0 Keypads Introduction .................................................................................................................................... 9-1 MC32N0 28-Key Keypad ............................................................................................................... 9-1 MC32N0 38-Key Keypad ............................................................................................................... 9-5 MC32N0 48-Key Keypad ............................................................................................................... 9-8 REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 6 MC32N0 User Guide with Android v5.1.1 REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY ABOUT THIS GUIDE Introduction This guide provides information about using the mobile computer and accessories. NOTE Screens and windows pictured in this guide are samples and can differ from actual screens. Documentation Set The documentation set for the MC32N0 Series provides information for specific user needs, and includes:

MC32N0 Quick Start Guide - describes how to get the device up and running. MC32N0 Regulatory Guide - provides required regulatory information. MC32N0 User Guide - describes how to use the device. MC32N0 Integrator Guide - describes how to set up the device and accessories. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 8 MC32N0 User Guide with Android v5.1.1 Configurations This guide covers the following configurations:

Configuration Radios Display Memory MC32N0G Premium MC32N0R Premium MC32N0S Premium WLAN:

802.11a/b/g/n WPAN:

Bluetooth v4.0 with EDR/LE WLAN:

802.11a/b/g/n WPAN:

Bluetooth v4.0 with EDR/LE WLAN:

802.11a/b/g/n WPAN:

Bluetooth v4.0 with EDR/LE 3.0 color 1 GB RAM / 4 GB Flash 3.0 color 1 GB RAM / 4 GB Flash Data Capture Options Imageror laser scanner, Interactive Sensor Technology

(IST) Laser scanner, IST 3.0 color 1 GB RAM / 4 GB Flash Imager or laser scanner, IST Operating System Android-based, Android Open-Source Project 5.1.1 Android-based, Android Open-Source Project 5.1.1 Android-based, Android Open-Source Project 5.1.1 Software Versions To determine the current software versions touch

>

About device. Serial number Displays the serial number. Model number Displays the model number. Android version Displays the operating system version. Kernel version Displays the kernel version number. Build number Displays the software build number. Chapter Descriptions Topics covered in this guide are as follows:

Chapter 1, Getting Started provides information on getting the MC32N0 up and running for the first time. Chapter 2, Using the MC32N0 provides basic instructions for using the MC32N0 with Android OS, including powering on and resetting the MC32N0. Chapter 3, Applications describes the applications installed on the device. Chapter 4, Data Capture provides information for capturing bar code data using the internal camera and optional scan modules and Bluetooth scanner. Chapter 5, Wireless provides information on the various wireless options. Chapter 6, Accessories describes the available accessories and how to use them with the MC32N0. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY About This Guide 9 Chapter 7, Maintenance and Troubleshooting includes instructions on cleaning and storing the MC32N0, and provides troubleshooting solutions for potential problems during MC32N0 operation. Chapter 8, Technical Specifications provides the technical specifications for the MC32N0. Chapter 9, MC32N0 Keypads provides keypad descriptions and special character generation tables. Notational Conventions The following conventions are used in this document:

tablet refers to the Zebra tablet. Italics are used to highlight the following:

Chapters and sections in this guide Related documents Bold text is used to highlight the following:

Dialog box, window and screen names Drop-down list and list box names Check box and radio button names Key names on a keypad Button names on a screen. Icons on a screen Bullets () indicate:

Action items Lists of alternatives Lists of required steps that are not necessarily sequential. Sequential lists (e.g., those that describe step-by-step procedures) appear as numbered lists. Icon Conventions The documentation set is designed to give the reader more visual clues. The following graphic icons are used throughout the documentation set. These icons and their associated meanings are described below. NOTE NOTE contains information more important than the surrounding text, such as exceptions or preconditions. They also refer the reader elsewhere for additional information, remind the reader how to complete an action (when it is not part of the current procedure, for instance), or tell the reader where something is located on the screen. There is no warning level associated with a note. CAUTION The word CAUTION with the associated safety icon implies information that, if disregarded, may result in minor or moderate injury, or serious product damage. WARNING! The word WARNING with the associated safety icon implies information that, if disregarded, could result in death or serious injury, or serious product damage. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 10 MC32N0 User Guide with Android v5.1.1 Related Documents MC32N0 Quick Start Guide, p/n MN000215Axx MC32N0 Regulatory Guide, p/n MN000216Axx MC32N0 Integrator Guide, p/n MN000887Axx For the latest version of this guide and all guides, go to: http://www.zebra.com/support. Service Information If you have a problem with your equipment, contact Zebra Support Center for your region. Contact information is available at: http://www.zebra.com/support. When contacting the Zebra Support Center, please have the following information available:

Serial number of the unit (found on manufacturing label) Model number or product name (found on manufacturing label) Software type and version number Figure 2-1 Manufacturing Label Location Zebra responds to calls by email or telephone within the time limits set forth in support agreements. If your problem cannot be solved by the Zebra Support Center, you may need to return your equipment for servicing and will be given specific directions. Zebra is not responsible for any damages incurred during shipment if the approved shipping container is not used. Shipping the units improperly can possibly void the warranty. If you purchased your product from a Zebra business partner, contact that business partner for support. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY CHAPTER 1 GETTING STARTED Introduction This chapter provides the features of the MC32N0 and explains how to set it up for the first time. MC32N0G Features 2 3 4 5 6 7 8 1 2 9 Figure 1-1 Front View REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 1 - 2 MC32N0 User Guide with Android v5.1.1 Table 1-1 Features - Front View Number Item 1 2 3 4 5 6 8 9 Display Scan LED Charge LED Scan Button Keypad Power Button Handstrap Trigger Function Displays all information needed to operate the MC32N0G. Indicates decode functionality.Lights red when data capture is in progress. Light green indicating a successful decode. Indicates the battery charge state while charging. Initiates data capture when a scan application is enabled. Use to enter data and navigate on screen functions. Press and hold to turn on the MC32N0-G. Press to turn on or off the screen. Press and hold to select one of these options:

Power off - Turn off the MC32N0-G. Reset - Reboot the MC32N0-G when software stops responding. Airplane mode - Disable all wireless connections. Battery swap - Places the device in Battery Swap mode when replacing the battery. Silent mode - All notifications are disabled except for alarms. Use for securely holding the device. Initiates data capture when a scan application is enabled. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Getting Started 1 - 3 10 11 12 16 15 14 11 13 Figure 1-2 Bottom View Table 1-2 Features - Back View Number Item Stylus Silo Speakers Trigger Function Holds the stylus securely in the handle. Provides audio output for video and music playback. Initiates data capture. Headset Jack Connects to headsets (2.5 mm plug). Scan LED Indicates data capture functionality. Battery Release Buttons Release the battery from the device. Battery Provides power for operating the device. 10 11 12 13 14 15 16 REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 1 - 4 MC32N0 User Guide with Android v5.1.1 1 2 3 4 5 MC32N0R Features 10 9 8 7 6 Figure 1-3 Front View Table 1-3 Features - Front View Number Item Scan LED Beeper Display Function Indicates decode functionality. Light green indicating a successful decode. Provides audio notifications. Displays all information needed to operate the MC32N0R. Scan Button Initiates data capture. Power Button Press and hold to turn on the MC32N0-R. Press to turn on or off the screen. Press and hold to select one of these options:

Power Off - Turn off the MC32N0-R. Reset - Reboot the MC32N0-R when software stops responding. Airplane mode - Disable all wireless connections. Battery swap - Places the device in Battery Swap mode when replacing the battery. Silent mode - All notifications are disabled except for alarms. Microphone Use for making voice recordings. 1 2 3 4 5 6 REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Table 1-3 Features - Front View (Continued) Number Item Function Getting Started 1 - 5 7 8 9 10 19 18 13 15 17 Keypad Use to enter data and navigate on screen functions. Charging LED Indicates the battery charge state while charging. Rotating Turret Rotate for easy scanning positions. Exit Window Provides data capture using the laser scanner. 11 12 13 14 15 16 Figure 1-4 Back View Table 1-4 Features - Back View Number Item Exit Window Stylus Function Provides data capture using the laser scanner. Use to select items on the screen. Scan Button Initiates data capture. Stylus Holder Holds the stylus securely in the handstrap. Battery Release Buttons Release the battery from the device. Battery Provides the MC32N0-R with operating power. 11 12 13 14 15 16 REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 1 - 6 MC32N0 User Guide with Android v5.1.1 Table 1-4 Features - Back View (Continued) Number Item Handstrap Speaker Function Use for securely holding the device. Provides audio output for video and music playback. Headset Jack Connects to headsets (2.5 mm jack). 17 18 19 REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Getting Started 1 - 7 Rotating Scan Turret The MC32N0R features a Rotating Turret with three position stops. This feature offers greater scanning flexibility. CAUTION Do not try to rotate the turret past the side position stops. Damage to device may occur. Position Stop Position Stop 1 2 3 4 Position Stop Figure 1-5 Rotating Turret MC32N0S Features 8 7 6 5 Figure 1-6 Front View REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 1 - 8 MC32N0 User Guide with Android v5.1.1 Table 1-5 Features - Front View Number Item 1 2 3 4 5 6 7 8 17 16 11 15 13 Beeper Display Scan LED Provides audio notifications. Function Displays all information needed to operate the MC32N0R. Indicates decode functionality. Light green indicating a successful decode. Scan Button Initiates data capture. Power Button Microphone Keypad Press and hold to turn on the MC32N0-S. Press to turn on or off the screen. Press and hold to select one of these options:

Power off - Turn off the MC32N0-S. Reset - Reboot the MC32N0-S when software stops responding. Airplane mode - Disable all wireless connections. Battery swap - Places the device in Battery Swap mode when replacing the battery. Silent mode - All notifications are disabled except for alarms. Use for making voice recordings. Use to enter data and navigate on screen functions. Charging LED Indicates the battery charge state while charging. 9 10 11 12 13 14 Figure 1-7 Back View REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Getting Started 1 - 9 Table 1-6 Features - Back View Number Item Exit Window Stylus Function Provides data capture using the imager. Use to select items on the screen. Scan Button Initiates data capture. Stylus Holder Holds the stylus securely in the handstrap. Battery Release Buttons Battery Handstrap Speaker Release the battery from the device. Provides the MC32N0-S with operating power. Use for securely holding the device. Provides audio output for video and music playback. Headset Jack Connects to headset (2.5 mm jack). 9 10 11 12 13 14 15 16 17 REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 1 - 10 MC32N0 User Guide with Android v5.1.1 Unpacking Carefully remove all protective material from the MC32N0 and save the shipping container for later storage and shipping. Verify the following items are in the box:

MC32N0 Lithium-ion battery Quick Start Guide Regulatory Guide. Inspect the equipment for damage. If any equipment is missing or damaged, contact the Zebra Support Center immediately. See Service Information on page 10 for contact information. Setup To start using the MC32N0 for the first time:

Install a microSD card (optional) Install the battery Charge the MC32N0 Power on the MC32N0. Installing a microSD Card The microSD card slot provides secondary non-volatile storage. The slot is located under the battery pack. Refer to the documentation provided with the card for more information, and follow the manufacturers recommendations for use. CAUTION Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card. Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring that the operator is properly grounded. NOTE After installing the microSD card, the device will automatically reset. This ensures proper reading of the file content on the microSD card. 1. Remove the microSD card cover. Figure 1-8 Remove microSD Card Cover REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Getting Started 1 - 11 2. Slide the microSD card holder down to unlock. Figure 1-9 Unlock microSD Card Holder 3. Lift the microSD card holder. Figure 1-10 Lift microSD Card Holder 4. Place the microSD card into the contact area. Figure 1-11 Install microSD Card 5. Close the microSD card holder and slide the microSD card holder up to lock. Figure 1-12 Lock microSD Card Holder 6. Replace the microSD card cover and ensure that it is installed properly. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 1 - 12 MC32N0 User Guide with Android v5.1.1 Installing the MC32N0-G Battery To install the battery:

1. Align the battery into the battery compartment. Figure 1-13 Inserting the Battery 2. Rotate the bottom of the bottom into the battery compartment. 3. Press battery down firmly. Ensure that both battery release buttons on the sides of the MC32N0 return to the home position. Figure 1-14 Press Battery Down 4. Press the Power button to turn on the device. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Installing the MC32N0R/S Battery 1. Loosen the handstrap. 2. Align the top of the battery into the battery compartment. Getting Started 1 - 13 Figure 1-15 Inserting the Battery 3. Rotate the bottom of the bottom into the battery compartment. 4. Press battery down firmly. Ensure that both battery release buttons on the sides of the MC32N0 return to the home position. Figure 1-16 Press Battery Down 5. Tighten the handstrap. 6. Press the Power button to turn on the device. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 1 - 14 MC32N0 User Guide with Android v5.1.1 Charging the Battery CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 7-2. Use the mobile computer cradles, cables and spare battery chargers to charge the mobile computer main battery. The main battery can be charged before insertion into the mobile computer or after it is installed. There are two main batteries for the MC32N0, the Standard Battery (1X) and the Extended Life Battery (2X). The standard capacity battery ships from the factory in all MC32N0-R configurations. The Extended Life Battery ships from the factory in all MC32N0-S and MC32N0-G configurations. To install an Extended Life Battery in the MC32N0-R configurations, purchase an Extended Life Battery.Use one of the spare battery chargers to charge the main battery (out of the mobile computer) or one of the cradles to charge the main battery while it is installed in the mobile computer. Before using the mobile computer for the first time, fully charge the main battery until the amber Charge LED Indicator remains lit (see LED Charge Indicators on page 1-15 for charge status indications). The Standard Battery fully charges in less than five hours and the Extended Life Battery fully charges in less than eight hours. The MC32N0 retains data in memory for at least five minutes when the mobile computers main battery is removed or fully discharged. When the main battery reaches a very low battery state, the battery retains data in memory for at least 36 hours. Batteries must be charged within the 0 to +40 C (32 to 104 F) ambient temperature range. The following accessories can be used to charge batteries:

Cradles (and a power supply):

Single Slot Serial/USB Cradle with Battery Adapter Four Slot Cradles. Cables (and a power supply):

USB Client Charge Cable Serial (RS232) Charge Cable. Spare Battery Chargers (and a power supply):

Four Slot Spare Battery Charger Universal Battery Charger (UBC) Adapter with Battery Adapter. To charge the mobile computer using the cradles:

1. Insert the mobile computer into a cradle. See Chapter 6, Accessories for accessory setup. 2. The mobile computer starts to charge automatically. The amber Charge LED Indicator indicates the charge status. See the table below for charging indications. To charge the mobile computer using the cables:

1. Connect the MC32N0 Communication/Charge Cable to the appropriate power source and connect to the mobile computer. See Chapter 6, Accessories for accessory setup. 2. The mobile computer starts to charge automatically. The amber Charge LED Indicator indicates the charge status. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Getting Started 1 - 15 Table 1-7 LED Charge Indicators Status Off Indications MC32N0 is not charging. MC32N0 is not inserted correctly in the cradle. MC32N0 is not connected to a power source. Charger or cradle is not powered. Slow Blinking Amber MC32N0 is charging. Solid Amber Fast Blinking Amber Charging complete. Note: When the battery is initially inserted in the mobile computer, the amber LED flashes once if the battery power is low. Charging error, e.g.:

Temperature is too low or too high. Charging has gone on too long without completion (typically eight hours). Charging Temperature Charge batteries in ambient temperatures from 0 C to 40 C (32 F to 104 F) or up to 45 C (113 F) as reported by the battery. To view the battery temperature, touch the Battery Info icon on the Home screen or touch About device > Battery Information. Note that charging is intelligently controlled by the MC32N0. To accomplish this, for small periods of time, the MC32N0 or accessory alternately enables and disables battery charging to keep the battery at acceptable temperatures. The MC32N0 or accessory indicates when charging is disabled due to abnormal temperatures via its LED.

>

Charging Spare Batteries See Chapter 6, Accessories for information on using accessories to charge spare batteries. Replacing the MC32N0-G Battery 1. Press the Power button until the menu appears. 2. Touch Battery swap. Wait for the Scan LED to light red and then turn off. 3. Push in the two Battery Release buttons. The battery ejects slightly. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 1 - 16 MC32N0 User Guide with Android v5.1.1 Figure 1-17 Release Battery 4. Remove the battery from the battery compartment. Figure 1-18 Remove Battery REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 5. Align the battery into the battery compartment. Getting Started 1 - 17 Figure 1-19 Inserting the Battery 6. Rotate the bottom of the bottom into the battery compartment. 7. Press battery down firmly. Ensure that both battery release buttons on the sides of the MC32N0 return to the home position. Figure 1-20 Press Battery Down 8. Press the Power button to turn on the device. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 1 - 18 MC32N0 User Guide with Android v5.1.1 Replacing the MC32N0-R/S Battery 1. Press the Power button until the menu appears. 2. Touch Power Off and then OK. 3. Loosen the handstrap and lift to access the battery. 4. Push in the two Battery Release buttons. The battery ejects slightly. Figure 1-21 Release Battery 5. Lift the battery out of the battery compartment. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Getting Started 1 - 19 Figure 1-22 Remove Battery 6. Align the top of the battery into the battery compartment. 7. Rotate the bottom of the bottom into the battery compartment. 8. Press battery down firmly. Ensure that both battery release buttons on the sides of the MC32N0 return to the home position. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 1 - 20 MC32N0 User Guide with Android v5.1.1 Figure 1-23 Press Battery Down 9. Tighten the handstrap. 10. Press the Power button to turn on the device. Battery Management NOTE Prior to checking the battery charge level, remove the MC32N0 from any AC power source (cradle or cable). To check the charge status of the main battery, touch Battery status indicates that the battery is discharging and Battery level lists the battery charge (as a percentage of fully charged). About device > Status.

>

>

Monitor Battery Usage The Battery Use screen lists which applications consume the most battery power. Also use it to turn off applications that were downloaded if they are consuming too much power. Touch

>

>

Battery. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Getting Started 1 - 21 Figure 1-24 Battery Use Screen The Battery Use screen lists the applications using the battery. The discharge graph at the top of the screen shows the rate of battery discharge since last charged (short periods of time when connected to a charger are shown as thin green lines at the bottom of the chart), and how long it has been running on battery power. Touch an application in the Battery Use screen to display details about its power consumption. Different applications display different information. Some applications include buttons that open screens with settings to adjust power use. Low Battery Notification When the battery charge drops below 23% (Standard Capacity Battery) or 11% (Extended Capacity Battery), the MC32N0 displays a notice to connect the MC32N0 to power. Figure 1-25 Low Battery Notification Screen The user should replace the battery or charge the MC32N0 using one of the charging accessories. When the battery charge drops below 17% (Standard Capacity Battery) or 8% (Extended Capacity Battery), the MC32N0 goes into critical suspend mode to save data. The screen turns off. If the Power button is pressed, the Right LED flashes amber. The user must replace the battery or charge the MC32N0 using one of the charging accessories to retain data. Battery Optimization Observe the following battery saving tips:

Leave the MC32N0 connected to AC power at all times when not in use. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 1 - 22 MC32N0 User Guide with Android v5.1.1 Set the screen to turn off after a short period of non-use. Reduce the screen brightness. Turn off all wireless radios when not in use. Turn off automatic syncing for Email, Calendar, Contacts, and other applications. Use the Power Control widget to check and control the status of radios, the screen brightness, and syncing. Minimize use of applications that keep the MC32N0 from suspending, for example, music and video applications. Battery Optimization Observe the following battery saving tips:

Leave the MC32N0 connected to AC power at all times when not in use. Set the screen to turn off after a short period of non-use. Reduce the screen brightness. Turn off all wireless radios when not in use. Turn off automatic syncing for Email, Calendar, Contacts, and other applications. Use the Power Control widget to check and control the status of radios, the screen brightness, and syncing. Minimize use of applications that keep the MC32N0 from suspending, for example, music and video applications. Connecting a Wired Headset To connect a wired headset to the MC32N0:

Figure 1-26 Connect Headset to MC32N0R/S Figure 1-27 Connect Headset to MC32N0G REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Getting Started 1 - 23 Using a Bluetooth Headset You can use a Bluetooth headset for audio communication when an audio enabled application is used. See Bluetooth on page 5-10 for information on connecting a Bluetooth device to the mobile computer. Ensure that the mobile computers volume is set appropriately before putting the headset on. When a Bluetooth headset is connected the speaker is muted. NOTE If the mobile computer goes into suspend mode the Bluetooth connection is disabled and the mobile computer automatically switches to speakerphone mode. Real-Time Clock Backup The MC32N0 provides a Real-time Clock (RTC) backup feature. After boot-up, the device saves the system time in a file in persistent storage. When the device re-boots, it compares the system time to the time saved in a file. If the system time in not the latest, it restores the time from the file. Setting the Date and Time The date and time is automatically synchronized using an NITZ server when the MC32N0 is connected to a wireless network. The user is only required to set the time zone or set the date and time when not connected to a wireless network. 1. Touch

>

. Date & time. 2. Touch 3. Touch Automatic date & time to disable automatic date and time synchronization. 4. Touch Set date. 5. Scroll up and down to select the month, date and year. 6. Touch OK. 7. Touch Set time. 8. Select the hour, minutes and part of the day. 9. Touch OK. 10. Touch Select time zone. 11. Select the current time zone from the list. 12. Press

. Display Setting Use Display settings to change the screen brightness, change the background image, enable screen rotation, set sleep time and change font size. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 1 - 24 MC32N0 User Guide with Android v5.1.1 Setting the Screen Brightness 1. Touch

>

. Display. 2. Touch 3. Touch Brightness. Figure 1-28 Brightness Dialog Box In the Brightness dialog box, use the slider to set a brightness level. 4. 5. Press

. Changing the Screen Timeout Setting To set the MC32N0 to turn off after a short period of non-use:

1. Touch

>

. Display. 2. Touch 3. Touch Sleep 4. Select a value from the Sleep window. Options:

15 seconds 30 seconds 1 minute (default) 2 minutes 5 minutes 10 minutes 30 minutes

. 5. Press Setting Font Size To set the size of the font in system applications:

1. Touch

>

. Display. 2. Touch 3. Touch Font size. 4. Select one of the font size values. Small Normal (default) Large REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Getting Started 1 - 25 Huge 5. Press

. General Sounds Setting Use the Sound& notification settings to configure volume and notification. On the home screen, touch

>

>

Sound & notification. Figure 1-29 Sound & Notification Screen Sound Use the sound settings to change the volume of media, alarms and notifications. Media Volume

- Controls the music and media volume. Alarm Volume

- Controls the alarm clock volume. Notification Volume

- Controls the ringtone and notification volume. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 1 - 26 MC32N0 User Guide with Android v5.1.1 Figure 1-30 Interruptions Screen Interruptions When calls and notifications arrive - Touch to select when calls and notifications arrive. Priority Interruptions Events and reminders - Touch to allow events and reminders notifications to come through. Calls - Touch to silence all calls. Messages - Touch to allow message notifications to come through. Calls/messages from - Touch to choose which types of contacts can come through. Downtime Days - Touch to choose which days priority interruption settings are enabled. Start time - Touch to choose a start time when priority interruption settings are enabled. End time - Touch to choose an end time when priority interruption settings are disabled. Interruptions allowed - Touch to choose if priority interruptions are allow or no interruptions are allowed. Default notification ringtone- Touch to select a sound to play for all system notifications. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Getting Started 1 - 27 Other sounds Screen locking sounds - Check to play a sound when locking and unlocking the screen (default disabled). Touch sounds - Check to play a sound when making screen selections (default enabled). Notification Use the notification settings to configure how notifications arrive and which notifications arrive. On the home screen, touch

>

>

Sound & notification. When device is locked - Manage whether notifications can be seen when the MC18 is locked. App notifications - Modify the notification settings individually for an application. The setting under When device is locked always takes precedence over the setting for an individual application. Notification access - Displays which applications can access notifications. When a notification arrives, its icon appears at the top of the screen. Icons for pending notifications appear on the left, and system icons on the right. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 1 - 28 MC32N0 User Guide with Android v5.1.1 REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY CHAPTER 2 USING THE MC32N0 Introduction This chapter describes the screens, status and notification icons, and controls on the MC32N0, and provides basic instructions for using the MC32N0. Home Screen The Home screen displays when the MC32N0 turns on. Depending upon the configuration, the Home screen might appear different. Contact your system administrator for more information. After a suspend or screen time-out, the Home screen displays with the lock sliders. Slide up screen. For screen locking information see Un-Locking the Screen on page 2-13. to unlock the 1 2 6 5 4 Figure 2-1 Home Screen 3 REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 2 - 2 MC32N0 User Guide with Android v5.1.1 NOTE The Home screen icons can be configured by the user and may look different than shown. The Home screen consists of the following:

Table 2-1 Home Screen Items Item 1 Status Bar Displays the time, status icons (right side), and notification icons (left side). For more information see Status Bar on page 2-2 and Managing Notifications on page 2-5. Description 2 Browser Icon Opens the Browser application. 3 All Apps Icon Opens the APPS window. 4 Settings Icon Opens the Settings window. 5 Shortcut Icons 6 Widgets Opens applications installed on the MC32N0. See Application Shortcuts and Widgets on page 2-6 for more information. Launches stand-alone applications that run on the Home screen. See Application Shortcuts and Widgets on page 2-6 for more information. The Home screen provides four additional screens for placement of widgets and shortcuts. Swipe the screen left or right to view the additional screens. Status Bar The Status bar displays the time, notification icons (left side) and status icons (right side). Notifications icons Figure 2-2 Notification and Status Icons Status icons If there are more notifications than can fit in the Status bar, Open the Notifications panel to view all notifications and status. displays indicating that more notifications exist. Status Icons Table 2-2 Status Icons Icon Indicates that Bluetooth is on. Description Indicates that the device is connected to another Bluetooth device. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Using the MC32 2 - 3 Table 2-2 Status Icons (Continued) Icon Description Indicates that the Alarm is active. Indicates that all sounds except media and alarms are silenced and vibrate mode is active. Indicates that all sounds except media and alarms are silenced. Connected to a Wi-Fi network. No Wi-Fi signal. Indicates that the battery charge is very low. Indicates that the battery charge is low. Indicates that the battery is partially drained. Indicates that the battery is fully charged. Indicates that the battery is charging. Indicates that the battery charge is unknown. Indicates that the Airplane Mode is active. All radios are turned off. Indicates that the Orange key is locked. Indicates that the Blue key is pressed. Indicates that the ALT key is pressed. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 2 - 4 MC32N0 User Guide with Android v5.1.1 Table 2-2 Status Icons (Continued) Icon Description Indicates that the CTRL key is pressed. Indicates that the Shift key is pressed. Indicates that the Shift key is locked. Indicates that a wired headset is connected to the MC32N0. Notification Icons Table 2-3 Notification Icons Icon Description Indicates that more notifications are available for viewing. Indicates an upcoming event. Indicates that data is syncing. Indicates that a problem with sign-in or sync has occurred. Indicates that the device is uploading data. Indicates that the device is downloading data when animated and download is complete when static. Indicates that the internal storage disc is almost full. Indicates that the device is connected via USB cable. Indicates that the device is connected to a virtual private network (VPN). Preparing microSD card. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Using the MC32 2 - 5 Table 2-3 Notification Icons (Continued) Icon Description Indicates that USB debugging is enabled on the device. Screenshot captured. Error capturing screenshot. Indicates that the MultiUser feature is enabled. Indicates that a new user is logging in. Indicates the status of the PTT Express Voice Client. For a complete list of PTT Express notification icons see PTT Express Default Notification Icons on page 3-12 Indicates that DataWedge application is running on the device. Managing Notifications Notification icons report the arrival of new messages, calendar events, and alarms, as well as ongoing events. When a notification occurs, an icon appears in the Status bar with a brief description. See Notification Icons on page 2-4 for a list of possible notification icons and their description. Open the Notifications panel to view a list of all the notifications. To open the Notification panel, drag the Status bar down from the top of the screen. Table 2-4 Notification Panel REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 2 - 6 MC32N0 User Guide with Android v5.1.1 To respond to a notification, open the Notifications Panel and then touch a notification. The Notifications Panel closes and the subsequent activity is dependent on the notification. To clear all notifications, open the Notifications Panel and then touch removed. Ongoing notifications remain in the list. All event-based notifications are To close the Notification Panel, drag the bottom of the Notifications Panel to the top of the screen or press

. Quick Settings Use Quick Settings to get to frequently used settings, like turning on airplane mode. To open Quick Settings, swipe down from the top of the screen with two fingers or twice with one finger. Figure 2-3 Quick Settings To change a setting, just touch the icon:

Display brightness: Slide to lower or increase the brightness of the screen. Wi-Fi network: Turn Wi-Fi on or off. To open Wi-Fi settings, touch the Wi-Fi network name. Bluetooth settings: Turn Bluetooth on or off. To open Bluetooth settings, touch the Bluetooth. Airplane mode: Turn airplane mode on or off. Airplane mode means device will not connect to Wi-Fi or Bluetooth. Auto-rotate: Lock the devices orientation in portrait or landscape mode or set to automatically rotate. To close the Quick Settings Panel, swipe the Quick Settings Panel up or touch. Application Shortcuts and Widgets Application shortcuts placed on the Home screen allow quick and easy access to applications. Widgets are self-contained applications placed on the Home screen to access frequently used features. Adding an Application or Widget to the Home Screen 1. Go to the desired Home screen. 2. Touch 3. Swipe right, if necessary, to find the application icon or widget. 4. Touch and hold the icon or widget until the Home screen appears. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY

Table 6-1 MC32N0 Accessories (Continued) Accessory Part Number Description Accessories 6 - 3 Cables Charge Only Cable 25-70103-03R USB Client Charge Cable 25-67868-03R RS232 Charge Cable 25-67866-03R Vehicle Charge Cable Zebra Printer Cable VCA300001R 25-91513-01R Single Slot Cradle RS232 Cable 25-63852-01R Single Slot Cradle USB Cable 25-68596-01R Headset Adapter Cable 25-124411-02R Provides power to the MC32N0. Requires power supply PWRS-14000249R. Provides USB client communication capabilities and charges the MC32N0. Provides RS232 communication capabilities and charges the MC32N0. Changes the MC32N0 using a vehicles cigarette lighter. Provides printer specific communication capabilities. Provides serial host communication through the Single Slot Serial/USB cradle. Provides USB communication through the Single Slot Serial/USB cradle. Connects an RCH51 headset to the MC32N0. Contains 2.5 mm jack with unique locking screw. Miscellaneous Magnetic Stripe Reader 2740 mAh Battery 4800 mAh Battery MSR3000100R Reads magnetic stripe cards. BTRY-MC320101 BTRY-MC320110 BTRY-MC320201 BTRY-MC320210 Replacement standard capacity (1X) battery. Replacement standard capacity (1X) battery (10pack). Replacement extended capacity (2X) battery. Replacement extended capacity (2X) battery (10pack). Replacement non-elastic tether for MC32N0R and MC32N0S (3 pack). Replacement stylus and tether kit

(3-pack). Replacement Tether KT-7344001R MC32XX-R/S Stylus and Tether Kit 11-43912-03R REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 6 - 4 MC32N0 User Guide with Android v5.1.1 Table 6-1 MC32N0 Accessories (Continued) Accessory MC32N0G Stylus and Tether Part Number KT-8168003R KT-81680-50R MC32N0-G Handstrap Button KT-97258-01R MC32N0-G Handstrap SG-MC3123242-01R MC32N0-G Handstrap SG-MC3123342-01R MC32N0-R/S Handstrap SG-MC3123243-01R Description Replacement stylus and tether for MC32N0G (3-pack). Replacement stylus and tether for MC32N0G (50-pack). Replacement button for MC32N0-G handstrap (250-pack). Replacement handstrap for MC32N0-G. Replacement handstrap for MC32N0-G (5pack). Replacement handstrap for MC32N0-R and MC32N0-S. Plastic Holster Fabric Holster Fabric Holster Shoulder Strap Belt MC32N0G Rubber Boot MC32N0-S Rubber Boot 11-70899-04R MC32N0R Rubber Boot Mounting Bracket 117209604R KT-13664801 8710-050005-01R 116929301R SG-MC302121201R Provides a clip on holder for the MC32N0-R and MC32N0- S. Provides a soft, clip on holder and a shoulder strap for the MC32N0-R and MC32N0- S Provides a soft, clip on holder and a shoulder strap for the MC32N0G. 5840000007R Universal shoulder strap. 11-08062-02R 11-72959-04R Belt for fabric holster. Provides additional protection for both the MC32N0G laser and imager configurations. Provides additional protection for both the MC32N0S laser and imager configurations. Provides additional protection for the MC32N0R. Used to mount four slot cradles onto a wall. Battery Adapter Use the Battery Adapter with the Single Slot Serial/USB Cradle and the Four Slot Battery Charger to allow charging of the MC32N0 batteries. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Accessories 6 - 5 Installing the Battery Adapter The Battery Adapter is required to charge MC32N0 batteries in the Single Slot Serial/USB cradle, the Four Slot Battery Charger or the UBC Adapter. 1. Remove power from the cradle or charger. 2. 3. Rotate the Battery Adapter down into the battery slot. Insert the end of the Battery Adapter into the battery slot. Figure 6-1 Battery Adapter in Single Slot Serial/USB Cradle NOTE On the Four Slot Battery Charger, install the Battery Adapter into the two front slots before installing into the two rear slots. If charing both MC3200 and MC3100 batteries in the charger, install the MC3200 battery adapter in the back slots and install the MC3100 batteries in the front slots. Figure 6-2 Battery Adapter in Four Slot Battery Charger REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 6 - 6 MC32N0 User Guide with Android v5.1.1 Figure 6-3 Battery Adapter in UBC Adapter 4. Press the Battery Adapter down to ensure that it is properly seated. 5. Reconnect power. Removing the Battery Adapter 1. Remove power from the cradle or charger. 2. Remove the battery from Battery Adapter. 3. Slide the release latch toward the contact pins. Figure 6-4 Release Latch 4. Rotate the Battery Adapter up. 5. Remove the Battery Adapter from the battery slot. 6. Reconnect power. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Accessories 6 - 7 Single Slot Serial/USB Cradle CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 7-2 The Single Slot Serial/USB cradle:

Provides 5.4VDC power for operating the mobile computer, charging the battery and charging a spare battery. Provides a serial port and a USB port for data communication between the mobile computer and a host computer or other serial devices (e.g., a printer). Synchronizes information between the mobile computer and a host computer. With customized or third party software, it can also synchronize the mobile computer with corporate databases. Provides serial connection through the serial pass-through port for communication with a serial device, such as a host computer. Provides USB connection through the USB pass-through port for communication with a USB device, such as a host computer. Charging the MC32N0 Battery 1. Ensure that the cradle is connected to power. 2. Slide the mobile computer into the slot in the cradle. The mobile computer amber Charge LED Indicator, indicates the mobile computer battery charging status. Figure 6-5 MC32N0 Battery Charging 3. Gently press down on the device to ensure proper contact. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 6 - 8 MC32N0 User Guide with Android v5.1.1 4. When charging is complete, remove the mobile computer from the cradle slot. Charging an MC32N0 Spare Battery 1. Ensure that the cradle is connected to power. 2. Ensure that the Battery Adapter into the spare battery slot on the cradle. See Battery Adapter. 3. Insert the spare battery into the battery adapter, bottom first, and pivot the top of the battery down onto the contact pins. Figure 6-6 MC32N0 Spare Battery Charging 4. Gently press down on the battery to ensure proper contact. The Spare Battery Charging LED on the front of the cradle indicates the spare battery charging status. 5. When charging is complete, press the battery clip and lift the battery out of the slot. Battery Charging in Single Slot Serial/USB Cradle The Single Slot Serial/USB cradle charges the M32N0s main battery and a spare battery simultaneously. The MC32N0s Charge LED indicates the status of the battery charging in the MC32N0. See Features - Front View for charging status indications. The spare battery charging LED on the cradle indicates the status of the spare battery charging in the cradle. See below for charging status indications. Table 6-2 Spare Battery LED Charging Indicators Spare Battery LED (on cradle) Indication Slow Blinking Amber Solid Amber Spare battery is charging. Charging complete. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Accessories 6 - 9 Table 6-2 Spare Battery LED Charging Indicators (Continued) Spare Battery LED (on cradle) Indication Fast Blinking Amber Off Error in charging; check placement of spare battery. No spare battery in slot; spare battery not placed correctly; cradle is not powered. Charging Temperature Charge batteries in temperatures from 0 C to 40 C (32 F to 104 F). Charging is intelligently controlled by the MC32N0. To accomplish this, for small periods of time, the MC32N0 or cradle alternately enables and disables battery charging to keep the battery at acceptable temperatures. The MC32N0 or cradle indicates when charging is disabled due to abnormal temperatures via its LED. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 6 - 10 MC32N0 User Guide with Android v5.1.1 Four Slot Charge Only Cradle CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 7-2 The Four Slot Charge Only cradle:

Provides 5.4 VDC power for operating the mobile computer and charging the battery. Simultaneously charges up to four mobile computers. Figure 6-7 Four Slot Charge Only Cradle Charging the MC32N0 Battery Power LED 1. Ensure that the cradle is connected to power. 2. Slide the mobile computer into the slot in the cradle. The mobile computer amber Charge LED Indicator, indicates the mobile computer battery charging status. 3. Gently press down on the device to ensure proper contact. 4. When charging is complete, remove the mobile computer from the cradle slot. Battery Charging in the Four Slot Charge Only Cradle The MC32N0s Charge LED indicates the status of the battery charging in the MC32N0. See LED Charge Indicators on page 1-15 for charging status indications. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Accessories 6 - 11 The Standard Battery charges in less than five hours and the Extended Battery charges in less than eight hours. Charging Temperature Charge batteries in temperatures from 0 C to 40 C (32 F to 104 F). Charging is intelligently controlled by the MC32N0. To accomplish this, for small periods of time, the MC32N0 or cradle alternately enables and disables battery charging to keep the battery at acceptable temperatures. The MC32N0 or cradle indicates when charging is disabled due to abnormal temperatures via its LED. Four Slot Spare Battery Charger CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 7-2 The Four Slot Battery Charger charges up to four MC32N0 spare batteries. Charging Spare Batteries Before installing the battery, install the Battery Adapter into the battery slot in the Four Slot Spare Battery Charger. See Battery Adapter on page 6-4. 1. Connect the charger to a power source. 2. Insert the battery into a battery adapter and gently press down on the battery to ensure proper contact. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 6 - 12 MC32N0 User Guide with Android v5.1.1 Figure 6-8 Four Slot Battery Charger Spare Battery Charging LEDs Battery Charging Spare Battery Charging Each Battery Charging LED indicates the status of the battery charging in each slot. The table below describes the Battery Charging LED status. The Standard battery charges in less than five hours and the Extended battery fully charges in less than eight hours. Table 6-3 Battery LED Charging Indicators LED Indication Off No battery in slot. Battery is not charging. Battery Adapter is not inserted correctly in the slot. Battery is not inserted correctly in Battery Adapter. Charger is not powered. Slow blinking amber Battery is charging. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Accessories 6 - 13 Table 6-3 Battery LED Charging Indicators (Continued) LED Indication Solid amber Fast blinking amber Charging complete. Charging error. Charging Temperature Charge batteries in temperatures from 0 C to 40 C (32 F to 104 F). Charging is intelligently controlled by the MC32N0. To accomplish this, for small periods of time, the changer alternately enables and disables battery charging to keep the battery at acceptable temperatures. The charger indicates when charging is disabled due to abnormal temperatures via its LED. Magnetic Stripe Reader The Magnetic Stripe Reader (MSR) snaps on to the bottom of the MC3200 mobile computer to allow easy data capture with the swipe of a magnetic stripe card. Simply remove the MSR when not in use. Installing the MSR 1. Insert the mobile computer into the MSR, and push in the two locking tabs. Figure 6-9 Installing the MSR 2. Insert the mobile computer into the MSR, and push in the two locking tabs. Using the MSR To use the MSR, ensure the mobile computer has an application which accepts magnetic stripe data. 1. Swipe the magnetic stripe card through the MSR, orienting the magnetic stripe in either direction, from left to right, or right to left. Data encoded on the magnetic stripe displays in the mobile computer window. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 6 - 14 MC32N0 User Guide with Android v5.1.1 Figure 6-10 Card Swipe 2. For best results, gently press down on the card while swiping to ensure contact with the bottom of the MSR. Removing the MSR 1. Push in the bottom of the two locking tabs. Figure 6-11 Removing the MSR 2. Pull the MSR from the mobile computer. MC32N0 Cables CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 7-2 The cables are available with a variety of connection capabilities. Communication/Charge cables:

Provide the mobile computer with operating and charging power when used with the Symbol approved power supply. Synchronize information between the mobile computer and a host computer. With customized or third party software, it can also synchronize the mobile computer with corporate databases. Provide serial connection through the serial pass-through port for communication with a serial device, such as a host computer. For communication setup procedures, refer to the MC32N0 Integrator Guide. Provide USB connection through the USB pass-through port for communication with a USB device, such as a host computer. For communication setup procedures, refer to the MC32N0 Integrator Guide. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Accessories 6 - 15 The following Communication/Charge cables are available:

Serial (RS232) Charge cable (9-pin D female with power input receptacle) USB Client Charge cable (standard-A connector and a barrel receptacle for power). Dedicated Printer cables, provide communication with a dedicated printer. The following printer cables are available directly from the printer manufacturer:

ONeil printer cable Zebra printer cable Monarch printer cable. Figure 6-12 Cable Cup Universal Battery Charger Adapter CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 7-2 The Universal Battery Charger (UBC) Adapter can be used with a power supply as a standalone spare battery charger or it can be used with the four station UBC2000 to simultaneously charge up to four spare batteries. For additional information on the UBC 2000, see the UBC 2000 Quick Reference Guide p/n 70-33188-xx. Charging a Spare Battery in the UBC Adapter Before installing the battery, ensure that the Battery Adapter has been installed into the battery slot in the Universal Battery Charger Adapter. See Battery Adapter. Ensure that the adapter is connected to power source. 1. Insert the battery into a battery adapter and gently press down on the battery to ensure proper contact. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 6 - 16 MC32N0 User Guide with Android v5.1.1 Figure 6-13 Universal Battery Charger Adapter 2. Press down on the battery to ensure it is seated properly. UBC Adapter Battery Charging Spare Battery Charging The UBC Adapter charging LEDs indicate the battery charging status. The Standard Battery usually charges in less than five hours and the Extended Life Battery usually charges in less than eight hours. POWER READY or STANDBY or FAULT

(Green)

(Flashing Yellow)

(Solid Yellow) CHARGING

(Solid Yellow) Figure 6-14 UBC Adapter LEDs Table 6-4 UBC Adapter Charge LED Status Indications LED POWER READY or Indication Green Green Description Power is connected to the UBC Adapter. Charging complete. STANDBY or Flashing-Yellow The battery was deeply discharged and is being trickle charged to bring the voltage up to the operating level. After operating level voltage is achieved, the battery charges normally. FAULT Yellow CHARGING Yellow Charging error, check placement of mobile computer/spare battery. Normal charge. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Accessories 6 - 17 Plastic Holster The Plastic Holster provides a holder for the mobile computer. It consists of a mobile computer holder and a detachable belt clip. Press the release button to remove the detachable belt clip. Release Button Detachable Belt Clip Mobile Computer Holder Figure 6-15 Plastic Holster The Plastic Holster provides a holder for the mobile computer. It consists of a mobile computer holder and a detachable belt clip. Press the release button to remove the detachable belt clip. Clip Release Mobile Computer Holder Figure 6-16 Attaching the Plastic Holster The Plastic Holster holds the mobile computer on a belt or waist band. To insert the mobile computer, slide the mobile computer into the Plastic Holster with the screen facing the user. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 6 - 18 MC32N0 User Guide with Android v5.1.1 To remove the mobile computer, press and lift to remove the mobile computer. Insert Mobile Computer Figure 6-17 Insert and Remove the Mobile Computer Remove Mobile Computer Fabric Holster The Fabric Holster provides a soft holder for the mobile computer. It consists of a fabric mobile computer holder, a detachable shoulder strap and a detachable belt clip. Press the release button to remove the detachable belt clip. See figures below to remove the detachable clip and to attach the Fabric Holster to a belt and shoulder strap. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Accessories 6 - 19 Release Button Detachable Belt Clip Mobile Computer Holder Figure 6-18 Fabric Holster Detachable Belt Clip Belt Clip Pinch the clip release and attach the Fabric Holster to a belt or waist band. Shoulder Strap Remove the detachable belt clip and attach the shoulder strap. Figure 6-19 Attach the Fabric Holster to the Shoulder Strap REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 6 - 20 MC32N0 User Guide with Android v5.1.1 The Fabric Holster holds the mobile computer on a belt or waist band. To insert the mobile computer, slide the mobile computer into the Fabric Holster with the screen facing the user. Pull restraining strap over mobile computer and secure in the clip. To remove the mobile computer, pull down on restraining strap to release from clip and lift retaining strap clear. Lift mobile computer out of Fabric Holster. Figure 6-20 Insert and Remove the MC32N0. Using the Belt Clip 1. Pinch the clip release. 2. Attach the Fabric Holster to a belt or waist band. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Accessories 6 - 21 Figure 6-21 Attaching the Fabric Holster To a Belt 3. Lift the strap and insert the MC32N0 into the holster. Figure 6-22 Insert MC32N0 in Holster 4. Secure the strap to hold the MC32N0 in place. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 6 - 22 MC32N0 User Guide with Android v5.1.1 Using the Shoulder Strap 1. Press the release button on the top of the belt clip. 2. Remove the clip from the holster. Figure 6-23 Remove Belt Clip 3. Connect the clips on the shoulder strap to the rings on the fabric holster. 4. Place the shoulder strap over your head and rest on your shoulder. Figure 6-24 Shoulder Strap 5. Lift the strap and insert the MC32N0 into the holster. 6. Secure the strap to hold the MC32N0 in place. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY CHAPTER 7 MAINTENANCE AND TROUBLESHOOTING Introduction This chapter includes instructions on cleaning and storing the device, and provides troubleshooting solutions for potential problems during operation. Maintaining the MC32N0 For trouble-free service, observe the following tips when using the MC32N0:

Do not scratch the screen of the MC32N0. When working with the MC32N0, use the supplied stylus or plastic-tipped pens intended for use with a touch-sensitive screen. Never use an actual pen or pencil or other sharp object on the surface of the MC32N0 screen. The touch-sensitive screen of the MC32N0 is glass. Do not to drop the MC32N0 or subject it to strong impact. Protect the MC32N0 from temperature extremes. Do not leave it on the dashboard of a car on a hot day, and keep it away from heat sources. Do not store or use the MC32N0 in any location that is dusty, damp, or wet. Use a soft lens cloth to clean the MC32N0. If the surface of the MC32N0 screen becomes soiled, clean it with a soft cloth moistened with a diluted window-cleaning solution. Periodically replace the rechargeable battery to ensure maximum battery life and product performance. Battery life depends on individual usage patterns. A screen protector is applied to the MC32N0. Zebra recommends using this to minimize wear and tear. Screen protectors enhance the usability and durability of touch screen displays. Benefits include:

Protection from scratches and gouges Durable writing and touch surface with tactile feel Abrasion and chemical resistance Glare reduction Keeping the devices screen looking new Quick and easy installation. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 7 - 2 MC32N0 User Guide with Android v5.1.1 Battery Safety Guidelines WARNING! Failure to follow these guidelines may result in fire, explosion, or other hazard. The area in which the units are charged should be clear of debris and combustible materials or chemicals. Particular care should be taken where the device is charged in a non commercial environment. Follow battery usage, storage, and charging guidelines found in this guide. To charge the mobile device battery, the battery and charger temperatures must be between +32 F and Improper battery use may result in a fire, explosion, or other hazard.

+104 F (0 C and +40 C) Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present a risk of fire, explosion, leakage, or other hazard. If you have any questions about the compatibility of a battery or a charger, contact Zebra Customer Support Center. Do not disassemble or open, crush, bend or deform, puncture, or shred. Severe impact from dropping any battery-operated device on a hard surface could cause the battery to overheat. Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals. Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, or expose to fire, explosion, or other hazard. Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle or near a radiator or other heat source. Do not place battery into a microwave oven or dryer. Battery usage by children should be supervised. Please follow local regulations to properly dispose of used re-chargeable batteries. Do not dispose of batteries in fire. Seek medical advice immediately if a battery has been swallowed. In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with large amounts of water and seek medical advice. If you suspect damage to your equipment or battery, contact Zebra Customer Support to arrange for inspection. Cleaning Instructions CAUTION Always wear eye protection. Read warning label on compressed air and alcohol product before using. If you have to use any other solution for medical reasons please contact the Global Customer Support Center for more information. WARNING! Avoid exposing this product to contact with hot oil or other flammable liquids. If such exposure occurs, unplug the device and clean the product immediately in accordance with these guidelines. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Maintanence and Troubleshooting 7 - 3 Approved Cleanser Active Ingredients 100% of the active ingredients in any cleaner must consist of one or some combination of the following: isopropyl alcohol, bleach/sodium hypochlorite, hydrogen peroxide or mild dish soap. Harmful Ingredients The following chemicals are known to damage the plastics on the device and should not come in contact with the device: ammonia solutions, compounds of amines or ammonia; acetone; ketones; ethers; aromatic and chlorinated hydrocarbons; acqueous or alcoholic alkaline solutions; ethanolamine; toluene; trichloroethylene; benzene;

carbolic acid and TB-lysoform. Cleaning Instructions Do not apply liquid directly to the device. Dampen a soft cloth or use pre-moistened wipes. Do not wrap the device in the cloth or wipe, but gently wipe the unit. Be careful not to let liquid pool around the display window or other places. Allow the unit to air dry before use. Special Cleaning Notes Many vinyl gloves contain phthalate additives, which are often not recommended for medical use and are known to be harmful to the housing of the device. The device should not be handled while wearing vinyl gloves containing phthalates, or before hands are washed to remove contaminant residue after gloves are removed. If products containing any of the harmful ingredients listed above are used prior to handling the device, such as hand sanitizer that contain ethanolamine, hands must be completely dry before handling the device to prevent damage to the plastics. Cleaning Materials Required Alcohol wipes Lens tissue Cotton-tipped applicators Can of compressed air with a tube. Isopropyl alcohol Cleaning Frequency The cleaning frequency is up to the customers discretion due to the varied environments in which the mobile devices are used. They may be cleaned as frequently as required, but it is advisable to clean the camera window periodically when used in dirty environments to ensure optimum performance. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 7 - 4 MC32N0 User Guide with Android v5.1.1 Cleaning the MC32N0 Housing Using the alcohol wipes, wipe the housing including buttons. Display The display can be wiped down with the alcohol wipes, but care should be taken not to allow any pooling of liquid around the edges of the display. Immediately dry the display with a soft, non-abrasive cloth to prevent streaking. Exit Window Wipe the camera andexit window periodically with a lens tissue or other material suitable for cleaning optical material such as eyeglasses. Connector Cleaning To clean the connectors:

1. Remove the main battery from mobile computer. 2. Dip the cotton portion of the cotton-tipped applicator in isopropyl alcohol. 3. Rub the cotton portion of the cotton-tipped applicator back-and-forth across the connector. Do not leave any cotton residue on the connector. 4. Repeat at least three times. 5. Use the cotton-tipped applicator dipped in alcohol to remove any grease and dirt near the connector area. 6. Use a dry cotton-tipped applicator and repeat steps 4 through 6. CAUTION Do not point nozzle at yourself and others, ensure the nozzle or tube is away from your face. 7. Spray compressed air on the connector area by pointing the tube/nozzle about inch away from the surface. 8. Inspect the area for any grease or dirt, repeat if required. Cleaning Cradle Connectors To clean the connectors on a cradle:

1. Remove the DC power cable from the cradle. 2. Dip the cotton portion of the cotton-tipped applicator in isopropyl alcohol. 3. Rub the cotton portion of the cotton-tipped applicator along the pins of the connector. Slowly move the applicator back-and-forth from one side of the connector to the other. Do not leave any cotton residue on the connector. 4. All sides of the connector should also be rubbed with the cotton-tipped applicator. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Maintanence and Troubleshooting 7 - 5 CAUTION Do not point nozzle at yourself and others, ensure the nozzle or tube is away from your face. 5. Spray compressed air in the connector area by pointing the tube/nozzle about inch away from the surface. 6. Remove any lint left by the cotton-tipped applicator. 7. 8. Allow at least 10 to 30 minutes (depending on ambient temperature and humidity) for the alcohol to air dry If grease and other dirt can be found on other areas of the cradle, use a lint-free cloth and alcohol to remove. before applying power to cradle. If the temperature is low and humidity is high, longer drying time is required. Warm temperature and dry humidity requires less drying time. Troubleshooting the MC32N0 Table 7-1 Troubleshooting the MC32N0 Problem Cause Mobile computer does not turn on. Main battery not charged. Main battery not installed properly. MC32N0 not responding. Battery did not charge. Battery failed. Mobile computer removed from cradle while battery was charging. Charge or replace the main battery. Solution Ensure the battery is installed properly. Perform a soft reset. If the mobile computer still does not turn on, perform a hard reset. For more information see Resetting the Device on page 2-15. Replace battery. If the mobile computer still does not operate, try a soft reset , then a hard reset. See Resetting the Device on page 2-15. Insert mobile computer in cradle and begin charging. The Standard Battery requires up to five hours to recharge fully and the Extended Life Battery requires up to eight hours to recharge fully. Extreme battery temperature. Battery does not charge if ambient temperature is below 32 F (0 C) or above 104 F (40 C). Cannot see characters on screen. Mobile computer not powered on. Press the Power button. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 7 - 6 MC32N0 User Guide with Android v5.1.1 Table 7-1 Troubleshooting the MC32N0 (Continued) Problem Cause Solution Replace the mobile computer in the cradle, or reattach the cable and re-transmit. During data communication, no data was transmitted, or transmitted data was incomplete. Mobile computer removed from cradle or unplugged from host computer during communication. Incorrect cable configuration. See the system administrator or refer to the MC32N0 Integrator Guide. Mobile computer does not emit sound. Volume setting is low or turned off. Click on the speaker icon to increase the volume. MC32N0 turns itself off. MC32N0 is inactive. The mobile computer turns off after a period of inactivity. This period can be set from 15 seconds to 30 minutes. A message appears stating that the mobile computer memory is full. The MC32N0 does not decode when reading bar code. Battery is depleted. Too many applications installed on the mobile computer. Recharge or replace the battery. Remove user-installed applications on the MC32N0 to recover memory. Select programs and touch Uninstall. Apps > Downloaded. Select the unused

>

DataWedge is not enabled. Ensure that DataWedge is enabled and configured properly. Refer to the MC32N0 Integrator Guide for more information. Unreadable bar code. Distance between the MC32N0 and bar code is incorrect. MC32N0 is not programmed for the bar code type. MC32N0 is not programmed to generate a beep. Ensure the symbol is not defaced. Place the MC32N0 within proper scanning range. Program the MC32N0 to accept the type of bar code being scanned. Refer to the MC32N0 Integrator Guide for DataWedge configuration. If the MC32N0 does not beep on a good decode, set the application to generate a beep on good decode. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Maintanence and Troubleshooting 7 - 7 Table 7-1 Troubleshooting the MC32N0 (Continued) Problem MC32N0 cannot find any Bluetooth devices nearby. Cannot connect to WLAN. When trying to open File Browser or other applications, the application automatically closes. Cause Too far from other Bluetooth devices. The Bluetooth device(s) nearby are not turned on. The Bluetooth device(s) are not in discoverable mode. Access Point

(AP) does not broadcast country code. Solution Move closer to the other Bluetooth device(s), within a range of 10 meters (32.8 feet). Turn on the Bluetooth device(s) to find. Set the Bluetooth device(s) to discoverable mode. If needed, refer to the devices user documentation for help. Disable 802.11d feature. Touch Deselect the Enable 802.11d checkbox.

> Wi-Fi >

> Advanced. The Internal Memory is full. Connect the MC32N0 to a host computer and delete files from Internal Memory using the host computer. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 7 - 8 MC32N0 User Guide with Android v5.1.1 REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY CHAPTER 8 TECHNICAL SPECIFICATIONS Introduction The following sections provide technical specification for the device. MC32N0 Technical Specifications The following table summarizes the MC32N0s intended operating environment and technical hardware specifications. Table 8-1 MC32N0 Technical Specifications Item Physical Characteristics Dimensions Weight Display Touch Panel Description MC32N0-S:

7.49 in L x 3.22 in W x 1.78 in D

(190.4 mm L x 81.9 mm W x 45.2 mm D) MC32N0-R:

8.37 in L x 3.22 in W x 1.57 in D

(212.6 mm L x 81.9 mm W x 40.0 mm D) MC32N0-G:

7.59 in L x 3.18 in W x 6.5 in D

(192.7 mm L x 80.8 mm W x 166.0 mm H) MC32N0-R (with standard battery) - 13.1 oz (372 g) MC32N0-S (with standard battery) - 12.88 oz (365 g) MC32N0-G (with extended battery) - 18.0 oz (509 g) 3.0 inch Color (TFT) (320 x 320) display Chemically strengthened glass, resistive touch REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 8 - 2 MC32N0 User Guide with Android v5.1.1 Table 8-1 MC32N0 Technical Specifications (Continued) Item Description Backlight Battery Expansion Slot Network Connections Notification Keypad Options Audio Performance Characteristics CPU Operating System Memory Output Power (USB) User Environment Operating Temperature Storage Temperature Charging Temperature Humidity Drop Specification Electrostatic Discharge (ESD) Sealing Wireless LAN Data Communications Wireless Local Area Network (WLAN) radio LED backlight Standard: Rechargeable Lithium-Ion 2740 mAh minimum (3.7V) Extended Life: Rechargeable Lithium-Ion 4800 mAh minimum

(3.7V) User accessible microSD slot. Supports up to 32 GB microSDHC. Full-speed USB client, full-speed USB host, Bluetooth and WiFi. USB host mode available with appropriate cables only. LEDs and audio notifications 28-key Numeric 38-key Shifted Alpha (calculator-style integrated numeric keypad) 48-key Alpha-Numeric (calculator-style integrated numeric keypad) Speaker, microphone, and headset connector (2.5 mm jack). Dual core, OMAP 4 @ 800 MHz (Standard). Dual core, OMAP 4 @ 1 GHz(Premium). Android-based ASOP 5.1.1(Premium only) 512 MB RAM, 2 GB Flash (Standard). 1 GB RAM, 4 GB Flash(Premium). USB: 5 VDC @ 500 mA max.

-20C to 50C (-4F to 122F)

-40 C to 70 C (-40 F to 158 F) without battery 0 C to 40 C (32 F to 104 F) 10% to 95% RH non-condensing Multiple 4 ft./1.2 m drop to concrete across the operating temperature range. Multiple 5 ft/1.5 m drops to concrete at ambient temperature 73 F/23 C. Meets and exceeds MIL-STD 810G. 20kVdc air discharge, 10kVdc direct discharge, 10kVdc indirect discharge IP54 per IEC specification. IEEE 802.11a/b/g/n with internal antenna REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Table 8-1 MC32N0 Technical Specifications (Continued) Specifications 8 - 3 Item Data Rates Supported Operating Channels Security Wireless PAN Data Bluetooth Data Capture Laser scanner Imager Laser Scanner (SE965) Specifications Optical Resolution Roll Pitch Angle Skew Tolerance Ambient Light Description 802.11b: 1, 2, 5.5, 11 Mbps 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11n: 6.5, 13, 19.5, 26, 39, 52, 58.5, 65, 72 Mbps (with SGI) Note that 802.11n data rates may be higher. Chan 36 - 165 (5180 5825 MHz), Chan 1 - 13 (2412 - 2472 MHz); actual operating channels/frequencies depend on regulatory rules and certification agency. Security Modes:WPA and WPA2 (Personal or Enterprise) Encryption: WEP40/WEP104, TKIP and AES Authentication: EAP-TLS; EAP-TTLS (MSCHAP, MSCHAPv2, PAP); PEAP (MSCHAPv2, EAP-GTC); LEAP; EAP-FAST

(MSCHAPv2, EAP-GTC). Authentication:TLS; TTLS (MSCHAP, MSCHAPv2 or PAP;

PEAP (MSCHAPv2, GTC); LEAP; FAST (MSCHAPv2, GTC). Other: Wi-Fi, CCXv4 certified, and supports IPv6 FIPS 1402 certified Class II, v 4.0 with EDR/LE; integrated antenna. Captures 1D bar codes. Captures 1D and 2D bar codes. 0.005 in. minimum element width Condition: 20 mil Code 39 at 10 in. 35 from vertical Condition: 20 mil Code 39 at 10 in. 65 from normal Condition: 20 mil Code 39 at 10 in. 40 from normal Tolerant to typical artificial indoor and natural outdoor (direct sunlight) lighting conditions. Fluorescent, Incandescent, Mercury Vapor, Sodium Vapor, LED:

450 ft. Candles (4,844 Lux) Sunlight: 10,000 Ft Candles (107,640 Lux) Note: LED lighting with high AC ripple content can impact scanning performance. Scan Repetition Rate 104 ( 14) scans/sec (bidirectional) REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 8 - 4 MC32N0 User Guide with Android v5.1.1 Table 8-1 MC32N0 Technical Specifications (Continued) Item Scan Angle 2D Imager Engine (SE4750) Specifications Field of View Image Resolution Roll Pitch Angle Skew Tolerance Ambient Light Focal Distance Laser Aiming Element Illumination System Supported Symbologies 1D 2D Description Wide (Default): 47 (typical) Medium: 35 (typical) Narrow: 10 (typical) Horizontal - 48.0 Vertical - 36.7 1280 horizontal X 960 vertical pixels 360

+/- 60 from normal

+/- 60 from normal Sunlight: 10,000 ft. candles (107,639 lux) From front of engine: 17.7 cm (7.0 in.) Visible Laser Diode (VLD): 655 nm +/- 10 nm Central Dot Optical Power: 0.6 mW (typical) Pattern Angle: 48.0 horizontal, 38.0 vertical LEDs: Warm white LED Pattern Angle: 80 at 505 intensity Chinese 2 of 5, Codabar, Code 11, Code 128, Code 39, Code 93, Discrete 2 of 5, EAN-8, EAN-13, GS1 DataBar, GS1 DataBar Expanded, GS1 DataBar Limited, Interleaved 2 of 5, Korean 2 of 5, MSI, TLC 39, Matrix 2 of 5, Trioptic, UPCA, UPCE, UPCE1, Web Code. Australian Postal, Aztec, Canadian Postal, Composite AB, Composite C, Data Matrix, Dutch Postal, Japan Postal, Maxicode, Micro PDF, Micro QR, PDF, QR Code, UK Postal, US Planet, US Postnet, US4State, US4State FICS. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY CHAPTER 9 MC32N0 KEYPADS Introduction The MC32N0 offers three types of keypad configurations: 28 key, 38 key and 48 key. MC32N0 28-Key Keypad The 28-key keypad contains a Power button, application keys, scroll keys and function keys. The keypad is color-coded to indicate the alternate function key (blue) values and the alternate ALPHA key (orange) values. Note that keypad functions can be changed by an application so the mobile computer keypad may not function as described. See the tables below for key and button descriptions and keypad alternate functions. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 9 - 2 MC32N0 User Guide with Android v5.1.1 Figure 9-1 28-Key Keypad Configuration Table 9-1 28-Key Keypad Descriptions Key Description Power (red) Powers the mobile computer screen on and off (resume and suspend). Back Menu Displays the previous screen. Closes the on-screen keyboard if open. Opens a menu with items that affect the current screen or application. Scan (yellow) Used in scanning applications, press to scan a bar code. This key has the same function as activating the side mounted scan buttons. Scroll Up and Down Moves up and down from one item to another. Increases/decreases specified values. Increases and decreases volume when the blue FUNC key is activated and the up and down arrow keys are pressed. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Keypads 9 - 3 Table 9-1 28-Key Keypad Descriptions (Continued) Key Scroll Left and Right ESC CTRL Numeric/Alpha/Special Function Description Moves left and right from one item to another. Increases/decreases specified values. Produces a TAB when the blue FUNC key is activated and the right arrow key is pressed. Produces the ESC function by default. Press and release the CTRL key to activate the keypad alternate CTRL functions. The icon appears in the Status bar. Press and release the CTRL key again to return to the default keypad functions. Press and release the blue FUNC key and then the CTRL key to activate the ALT functions. The icon appears in the Status bar. Press and release the CTRL key two times to return to the default keypad functions. Numeric, alpha or special function keys. Numeric by default. Produces a special function when the blue FUNC key is activated. Produces alpha values when the orange ALPHA key is activated. In Alpha state, produces the lower case alphabetic characters on the key. Each key press produces the next alphabetic character in sequence. For example, press and release the ALPHA key and then press the 4 key once to produce the letter g; press and release the ALPHA key and then press the 4 key three times to produce the letter i. When the SHIFT key is pressed in Alpha state, the upper case alphabetic characters on the key are produced. For example, press and release the ALPHA key, press and hold the SHIFT key and then press the 4 key once to produce the letter G; press and release the ALPHA key, press and hold the SHIFT key and then press the 4 key three times to produce the letter I. Period/Decimal Point Produces a period for alpha entries and a decimal point for numeric entries by default. Increases brightness when the blue FUNC key is activated. Enter BKSP Executes a selected item or function. Backspace function by default. Decreases brightness when the blue FUNC key is activated. SPACE Space function by default. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 9 - 4 MC32N0 User Guide with Android v5.1.1 Table 9-1 28-Key Keypad Descriptions (Continued) Key Description Shift Press and release the SHIFT key to activate the keypad alternate SHIFT functions. The SHIFT key again to return to the default keypad functions. icon appears on the Status bar. Press and release the ALPHA Press the orange ALPHA key to access the alternate ALPHA characters FUNC Home

(shown on the keypad in orange). The Press and release the orange ALPHA key again to return to the default keypad functions. icon appears on the Status bar. Press and release the blue FUNC key to activate the keypad alternate functions

(shown on the keypad in blue). The icon appears on the Status bar. Press and release the blue FUNC key again to return to the default keypad functions. Displays the Home screen with a single press. Displays recently used applications when held for a short period of time. Table 9-2 28-key Keypad Input Modes Key 1 2 3 4 5 6 7 8 9 0

. 1 2 3 4 5 6 7 8 9 0

. Numeric State Orange Key (Alpha Lowercase State) Orange Key + Shift Key (Alpha Uppercase State) SHIFT

+ Key

!

@

#

$

%

^

&

*

(

)

>

1st Press

*

a d g j m p t w 0

. 2nd Press 3rd Press 4th Press 1st Press 2nd Press 3rd Press 4th Press b e h k n q u x c f i l o r v y s z B E H K N Q U X C F I L O R V Y S Z A D G J M P T W 0

. NOTE An application can change the key functions. The keypad may not function exactly as described. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Keypads 9 - 5 MC32N0 38-Key Keypad The 38-key keypad contains a Power button, application keys, scroll keys and function keys. The keypad is color-coded to indicate the alternate function key (blue) values. Note that keypad functions can be changed by an application so the mobile computer keypad may not function as described. The tables below provide key and button descriptions and keypad alternate functions. Figure 9-2 38-Key Keypad Android Configuration Table 9-3 38-Key Keypad Descriptions Key Description Power (red) Powers the mobile computer screen on and off (resume and suspend). Back Menu Displays the previous screen. Closes the on-screen keyboard if open. Opens a menu with items that affect the current screen or application. Scan (yellow) Used in scanning applications, press to scan a bar code. This key has the same function as activating the side mounted scan buttons. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 9 - 6 MC32N0 User Guide with Android v5.1.1 Table 9-3 38-Key Keypad Descriptions (Continued) Key Scroll Up and Down Scroll Left and Right Description Moves up and down from one item to another. Increases/decreases specified values. Increases and decreases volume when the blue FUNC key is activated and the up and down arrow keys are pressed. Moves left and right from one item to another. Increases/decreases specified values. Produces a TAB when the blue FUNC key is activated and the right arrow key is pressed. ALPHA Press the orange ALPHA key to access the alternate ALPHA characters

(shown on the keypad in orange). The Press and release the orange ALPHA key again to return to the default keypad functions. icon appears on the Status bar. CTRL Press and release the CTRL key to activate the keypad alternate CTRL ESC FUNC functions. The CTRL key again to return to the default keypad functions. Press and release the blue FUNC key and then the CTRL key to activate the ALT functions. The icon appears on the Status bar. Press and release the icon appears on the Status bar. Press and release the CTRL key two times to return to the default keypad functions. Produces the escape function. Press and release the blue FUNC key to activate the keypad alternate functions

(shown on the keypad in blue). The icon appears on the Status bar. Press and release the blue FUNC key again to return to the default keypad functions. Numeric/Alpha/Special Function Press for the default numeric value. Produces alpha values when the orange ALPHA key is activated. BKSP Shift Backspace function by default. Decreases brightness when the blue FUNC key is activated. Press and release the SHIFT key to activate the keypad alternate SHIFT functions. The SHIFT key again to return to the default keypad functions. icon appears on the Status bar. Press and release the REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Table 9-3 38-Key Keypad Descriptions (Continued) Key Description Enter Executes a selected item or function. Keypads 9 - 7 Period Comma Produces a period for alpha entries and a decimal point for numeric entries. Produces a comma by default. Special Function/Alpha Special function by default or when the blue FUNC key is activated. Home Displays the Home screen with a single press. Displays recently used applications when held for a short period of time. Table 9-4 38-key Keypad Input Modes Key Normal SHIFT + Key Orange + Key a b c d e f g h I 7 8 9

&

*

(

Right Arrow Up Arrow Down Arrow Left Arrow CTRL ESC 7 8 9 BKSP 4 Orange +

SHIFT + Key A Blue + Key B C D E F G H I Tab Ctrl

-

=

/

Backspace Backspace Space 4

$

j Space J Backspace

[

REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 9 - 8 MC32N0 User Guide with Android v5.1.1 Table 9-4 38-key Keypad Input Modes (Continued) Key Normal SHIFT + Key Orange + Key 5 6 1 2 3

, 0

. F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 5 6 1 2 3

, 0

.

%

^

!

@

#

<

)

>

k l m n o p q r s t u v w x y z

*

Orange +

SHIFT + Key K L M N O P Q R S T U V W X Y Z Blue + Key

]

;

\

, 0

-

F11 F12 F13 F14 Increase Brightness Increase Volume Decrease Brightness Decrease Volume NOTE An application can change the key functions. The keypad may not function exactly as described. MC32N0 48-Key Keypad The 48-key keypad contains a Power button, application keys, scroll keys and function keys. The keypad is color-coded to indicate the alternate function key (blue) values. Note, that keypad functions can be changed by an application so the mobile computer keypad may not function as described. The tables below provide key and button descriptions and keypad alternate functions. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Keypads 9 - 9 Figure 9-3 48-Key Keypad Android Configuration Table 9-5 48-Key Keypad Descriptions Key Description Power (red) Powers the mobile computer screen on and off (resume and suspend). Back Menu On Android device, displays the previous screen. Closes the on-screen keyboard if open. On Android device, opens a menu with items that affect the current screen or application. Scan (yellow) Used in scanning applications, press to scan a bar code. This key has the same function as activating the side mounted scan buttons. Orange Press the orange key to access the alternate navigation and selection functions. The orange key again to return to the default keypad functions. icon appears on the Status bar. Press and release the REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 9 - 10 MC32N0 User Guide with Android v5.1.1 Table 9-5 48-Key Keypad Descriptions (Continued) Key Numeric/Scroll/Select Description Numeric, scroll, select keys. Numeric by default. With the orange key activated, the 2, 4, 6, and 8 keys produce scroll functions and the 5 key produces a select function. With the FUNC key activated, 7 produces the ESC function and 9 produces the TAB function. Shift Press and release the SHIFT key to momentarily activate the keypad alternate SHIFT functions. The icon appears on the Status bar. Press and release the SHIFT key a second time to lock the keypad into the Shift-Lock mode. The icon appears on the Status bar. Press and release the SHIFT key again to return to the default keypad functions. Enter Executes a selected item or function. BKSP/SPACE BKSP, backspace function by default. Produces the SPACE function when the blue FUNC key is activated. Period CTRL Produces a period for alpha entries and a decimal point for numeric entries. Press and release the CTRL key to activate the keypad alternate CTRL functions. The CTRL key again to return to the default keypad functions. Press and release the blue FUNC key and then the CTRL key to activate the ALT functions. The icon appears on the Status bar. Press and release the icon appears on the Status bar. Press and release the CTRL key two times to return to the default keypad functions. Alpha/Special Function Alpha by default. Special function by default when the blue FUNC key is activated. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Keypads 9 - 11 Table 9-5 48-Key Keypad Descriptions (Continued) Key Description FUNC Home Press and release the blue FUNC function key to activate the keypad alternate functions (shown on the keypad in blue). The icon appears on the Status bar. Press and release the blue FUNC function key again to return to the default keypad functions. Displays the Home screen with a single press. Displays recently used applications when held for a short period of time. Table 9-6 48-key Keypad Input Modes Key Normal SHIFT + Key Blue + Key A B C D E F G H I J K L M N O P Q R S T U V a b c d e f g h I j k l m n o p q r s t u v A B C D E F G H I J K L M N O P Q R S T U V F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 Increase Brightness Increase Volume Decrease Brightness REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 9 - 12 MC32N0 User Guide with Android v5.1.1 Table 9-6 48-key Keypad Input Modes (Continued) Normal Key W X Y Z BKSP 1 2 3 4 5 6 7 8 9 0 SHIFT + Key Blue + Key Decrease Volume

*

Space w x y z W X Y Z Backspace Delete 1 2 3 4 5 6 7 8 9 0

!

@

#

$

%

^

&

*

(

) NOTE An application can change the key functions. The keypad may not function exactly as described. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Zebra Technologies Corporation, Inc. 3 Overlook Point Lincolnshire, IL 60069, U.S.A. http://www.zebra.com Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many jurisdictions worldwide. Google and Android are trademarks of Google Inc. All other trademarks are the property of their respective owners. 2017 Symbol Technologies LLC, a subsidiary of Zebra Technologies Corporation. All Rights Reserved. MN-003006-02 Revision A - March 2017 REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY

Using the MC32 2 - 7 5. Position the icon on the screen and then release. Moving Items on the Home Screen 1. Touch and hold the item until it floats on the screen. 2. Drag the item to a new location. Pause at the edge of the screen to drag the item onto an adjacent Home screen. 3. Lift finger to place the item on the Home screen. Removing an App or Widget from the Home Screen 1. Go to the desired Home screen. 2. Touch and hold the application shortcut or widget icon until it floats on the screen. 3. Drag the icon to on the top of the screen and then release. Folders Use Folders to organize similar applications together. Tap the folder to open and display items in the folder. Creating Folders To create a folder, there must be at least two app icons on the Home screen. 1. Go to the desired Home screen. 2. Touch and hold on one application icon. 3. Drag the icon and stack on top of another icon. 4. Release the icon. A folder is created containing both icons. Naming Folders 1. Touch the folder. Figure 2-4 Open Folder 2. Touch the title area and enter a folder name using the keyboard. 3. Touch anywhere on the Home screen or press to close the folder. The folder name appears under the folder. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 2 - 8 MC32N0 User Guide with Android v5.1.1 Figure 2-5 Renamed Folder Removing a Folder 1. Touch and hold the folder icon until it enlarges and the device vibrates. 2. Drag the icon to and release. Home Screen Wallpaper NOTE Use of Live Wallpaper may reduce battery life. Change the Home Screen Wallpaper 1. Touch and hold on the Home screen until the Choose Wallpaper from menu appears. 2. Touch Gallery, Live wallpapers or Wallpapers. Gallery - Select to use an image stored on the device. Live wallpapers - Select to use an animated wallpaper image. Wallpapers - Select to use a wallpaper image. 3. Touch Save or Set wallpaper. Using the Touchscreen Use the screen to operate the device. Touch - Touch to:

select items on the screen press on-screen buttons. type letters and symbols using the on-screen keyboard Touch and Hold - Touch and hold:

an item on the Home screen to move it to a new location or to the trash. an item in the All Apps screen to create a shortcut on the Home screen. the Home screen to change the Home screen wallpaper. Drag - Touch and hold an item for a moment and then move finger on the screen until reaching the new position. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Using the MC32 2 - 9 Swipe- Move finger up and down or left and right on the screen to:

unlock the screen view additional Home screens view additional application icons in the All Apps screen view more information on an applications screen. Double-tap - Tap twice on a web page, map, or other screen to zoom in and out. Using the On-screen Keyboard Use the on-screen keyboard to enter text in a text field. To configure the keyboard settings, touch and hold ,

(comma) or / (forward slash) >

and then select Android keyboard settings. Editing Text Edit entered text and use menu commands to cut, copy, and paste text within or across applications. Some applications do not support editing some or all of the text they display; others may offer their own way to select text. Entering Numbers, Symbols and Special Characters To enter numbers and symbols:

Touch and hold one of the top-row keys until a menu appears then select a number. Keys with alternate characters display an ellipsis ( ... ) below the character. Touch and hold the Shift key with one finger, touch one or more capital letters or symbols to enter them, and then lift both fingers to return to the lowercase keyboard. Touch ?123 to switch to the numbers and symbols keyboard. Touch the =\< key on the numbers and symbols keyboard to view additional symbols. To enter special characters, touch and hold a number or symbol key to open a menu of additional symbols. A larger version of the key displays briefly over the keyboard. Keys with alternate characters display an ellipsis ( ... ) below the character. Applications The APPS screen displays icons for all installed applications. The table below lists the applications installed on the MC32N0. Refer to the MC32N0 Integrator Guide for information on installing and uninstalling applications. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 2 - 10 MC32N0 User Guide with Android v5.1.1 Table 2-5 Applications Icon Description AppGallery - Provides links to utilities and demonstration applications that can be installed on the MC32N0. Battery Manager Displays battery information, including charge level, status, health and wear level. Bluetooth Pairing Use to pair the RS507 Hands-free imager with the MC32N0 by scanning a bar code. Browser - Use to access the Internet or intranet. Calculator - Provides the basic and scientific arithmetic functions. Calendar - Use to manage events and appointments. Clock - Use to schedule alarms for appointments or as a wake-up. Contacts - Use to manage contact information. DataWedge - Enables data capture using the camera or optional scanner. Downloads - lists all downloads files. DWDemo - Provides a way to demonstrate the data capture features using the Linear Imager. See DataWedge Demonstration for more information. elemez Use to provide diagnostic information. See Elemez on page 3-15 for more information. Email - Use to send and receive email. File Browser - Organize and manage files on the MC32N0. See File Browser for more information. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Using the MC32 2 - 11 Table 2-5 Applications (Continued) Icon Description Gallery - Use to view photos stored on the microSD card and internal memory. For more information, see Gallery for more information. Mobi Control Stage Opens the Mobi Control Stage application to stage the MC32N0. MSP Agent - Enables management of the MC32N0 from an MSP server. Requires the purchase of an appropriate MSP client license per device to suit the level of management functionality required. Music - Play music stored on the microSD card and internal memory. PTT Express Use to launch the PTT Express client for Voice over IP (VoIP) communication. Rapid Deployment- Allows the MC32N0 to stage a device for initial use by initiating the deployment of settings, firmware and software. Requires the purchase of an MSP client license per device. RxLogger Use to diagnose device and application issues. See RxLogger on page 3-14 for more information. Search - Use the Google search engine to search the Internet and the MC32N0. Settings - Use to configure the MC32N0. Sound Recorder - Use to record audio. StageNow - Allows the MC32N0 to stage a device for initial use by initiating the deployment of settings, firmware and software. Terminal Emulation Opens Wavelink Terminal Emulation application. Velocity - Opens the Wavelink terminal emulation application. AppLock Administrator - Use to configure the Application Lock feature. This icon appears after the optional MX feature is installed. MultiUser Administrator - Use to configure the MultiUser feature. This icon appears after the optional MX feature is installed. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 2 - 12 MC32N0 User Guide with Android v5.1.1 Accessing Applications All applications installed on the device are accessed using the APPS window. 1. On the Home screen touch

. The APPS window displays. Figure 2-6 APPS Window 2. Slide the APPS window left or right to view more application icons. Touch an icon to open the application. See Application Shortcuts and Widgets on page 2-6 for information on creating a shortcut on the Home screen. Switching Between Recent Applications 1. Press and hold

. A window appears on the screen with icons of recently used applications. Figure 2-7 Recently Used Applications 2. Slide the window up and down to view all recently used applications. 3. Swipe left or right to remove application from the list and force close the application. 4. Touch an icon to open it or press to return to the current screen. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Using the MC32 2 - 13 Un-Locking the Screen Use the Lock screen to protect access to data on the MC32N0. Some email accounts require locking the screen. Refer to the MC32N0 Integrator Guide for information on setting up the locking feature. The Locking feature functions differently in Single User mode or Multiple User mode. Single User Mode When locked, a pattern, PIN or password is required to unlock the device. Press the Power button to lock the screen. The device also locks after a pre-defined time-out. Press and release the Power button to wake the device. The Lock screen displays. Slide up to unlock the screen. If the Pattern screen unlock feature is enabled, the Pattern screen appears instead of the Lock screen. If the PIN or Password screen unlock feature is enabled, enter the PIN or password after unlocking the screen. Figure 2-8 Lock Screen Figure 2-9 PIN Screen REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 2 - 14 MC32N0 User Guide with Android v5.1.1 Figure 2-10 Pattern Screen Figure 2-11 Password Screen MultiUser Mode With MultiUser login, multiple users can log on to the device with each user having access to various applications and features. When enabled, the Login screen appears after powering on, resetting or after the device wakes from suspend mode. MultiUser Login 1. In the Login text field, enter the username. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Using the MC32 2 - 15 Figure 2-12 Multiple User Log In Screen In the Password text field, enter the password. 2. 3. Touch OK. After a resume from suspend, the user must enter the password. MultiUser Logout 1. Drag the Status Bar down from the top of the screen. 2. Touch MultiUser is active. 3. Touch Logout. 4. The Login screen appears. Resetting the Device There are two reset functions, soft reset and hard reset. Performing a Soft Reset Perform a soft reset if applications stop responding. 1. Press and hold the Power button until the menu appears. 2. Touch Reset. 3. The device reboots. Performing a Hard Reset NOTE All un-saved data is lost after performing a Hard Reset. Perform a Hard Reset if the device stops responding. To perform a Hard Reset:

1. Simultaneously press the Power button, 1 and 9 keys. 2. The device reboots. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 2 - 16 MC32N0 User Guide with Android v5.1.1 Suspend Mode The MC32N0 goes into suspend mode when the user presses the Power button or after a period of inactivity (set in the Display settings window). To wake the MC32N0 from Suspend mode, press the Power button. The Lock screen displays. Slide up to unlock the screen. See Un-Locking the Screen on page 2-13. NOTE If the user enters the PIN, password or pattern incorrectly five times, they must wait 30 seconds before trying again. If the user forgets the PIN, password or pattern contact the system administrator. Figure 2-13 Lock Screen REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY CHAPTER 3 APPLICATIONS Introduction This section describes the applications installed on the device. Battery Manager The Battery Manager provides detailed information about the battery. To open Battery Manager, touch

>

. Figure 3-1 Battery Manager Screen Battery level - Indicate the current battery charge level. Time since charging- Indicates the amount of time since the device began charging. Displays when the MC32N0 is on AC power. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 3 - 2 MC32N0 User Guide with Android v5.1.1 Battery status Not charging - Indicates that the MC32N0 is not connected to AC power. Charging over AC - Indicates that the MC32N0 is connected to AC power and charging. Battery health - Indicates the health of the battery. Wear level - Indicates the health of the battery in graphical form. Advanced info - Tap to view additional battery information. File Browser Use the File Browser application to view and mange files on the device. To open File Browser, touch

>

. 3 4 1 2 5 Figure 3-2 File Browser Screen The address bar (1) indicates the current folder path. Touch the current folder path to manually enter a path and folder name. Use Use Use

(2) to select multiple files/folder.

(3) to view the internal storage root folder.

(4) to view the microSD card root folder.

(5) to view the previous folder or to exit the application. Use Touch and hold an item to perform an operation on that item. Select one of the options from the File Operations menu:

Information - View detailed information about the file or folder. Move - Move the file or folder to a new location. Copy - Copy the select file. Delete - Delete the selected file. Rename - Rename the select file. Open as - Open the selected file as a specific file type. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Applications 3 - 3 Share - Share the file with other devices. Contacts Use the Contacts application to manage contacts. From a Home or Apps screen, touch

. Contacts opens to the main list of contacts. View contacts in three ways at the top of the screen: Groups, All contacts, and Favorites. Touch the tabs to change how to view the contacts. Swipe up or down to scroll through the lists. Adding Contacts In the Contacts application, touch If there are more than one account with contacts, touch the one to use. 1. 2. 3. Type the contacts name and other information. Touch a field to start typing, and swipe down to view all

. categories. 4. To add more than one entry for a category for example, to add a work address after typing a personal address - an additional category appears each time information is added. To open a menu with preset labels, such as Home or Work for an email address, touch the label to the right of the contact information. 5. Press

. Editing Contacts 1. In the Contacts application, touch a contact to edit tab. 2. Touch 3. Edit the contact information. 4. Press

. Deleting Contacts 1. In the Contacts application, touch a contact to edit tab. 2. Press 3. Touch Delete. 4. Touch OK to confirm. Gallery NOTE The device supports the following image formats: jpeg, gif, png and bmp. The device supports the following video formats: H.263, H.264 and MPEG4 Simple Profile. Use Gallery to:

view photos REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 3 - 4 MC32N0 User Guide with Android v5.1.1 play videos perform basic editing of photos set photos as wallpaper set photos as a contact photo share photos and videos. To open the Gallery application, touch right. Gallery presents all photos and videos stored on the microSD card and internal memory.

>

or in the camera application touch the thumbnail image at the top Figure 3-3 Gallery Albums Touch an album to open it and view its contents. The photos and videos in the album are displayed in chronological order. Touch a photo or video in an album to view it. Press to return to the main Gallery screen. Working with Albums Albums are groups of images and videos in folders. Touch an album to open it. The photos and videos are listed in a chronologically ordered grid. The name of the album displays at the top of the screen. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Applications 3 - 5 Figure 3-4 Photos Inside an Album Swipe left or right to scroll images across the screen. Share an Album

.

>

1. Touch 2. Touch and hold an album until it highlights. 3. Touch other albums as required. 4. Touch 5. Follow the instructions within the selected application. The Share menu opens. Touch the application to use to share the selected albums. Get Album Information 1. Touch 2. Touch and hold an album until it highlights.

>

. 3. Touch

> Details. Deleting an Album To delete an album and its contents:

.

>

1. Touch 2. Touch and hold an album until it highlights. 3. Check other albums to delete. Ensure that other albums are selected. 4. Touch 5. In the Delete selected item? menu, touch OK to delete the album. Working with Photos Use Gallery to view, edit and share photos. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 3 - 6 MC32N0 User Guide with Android v5.1.1 Viewing and Browsing Photos To view a photo:

.

>

1. Touch 2. Touch an album to open it. 3. Touch a photo. Figure 3-5 Photo Example 4. Swipe left or right to view the next or previous photo in the album. 5. Touch the photo to view the controls. 6. Double-tap the screen to zoom in or pinch two fingers together or spread them apart to zoom in or out. 7. Drag the photo to view parts that are not in view. Cropping a Photo 1. In Gallery, touch a photo to view the controls. 2. Press 3. Touch Crop. The blue cropping tool appears. 4. Use the cropping tool to select the portion of the photo to crop. Drag from the inside of the cropping tool to move it. Drag an edge of the cropping tool to resize it to any proportion. Drag a corner of the cropping tool to resize it with fixed proportions. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Applications 3 - 7 Figure 3-6 Cropping Tool 5. Touch SAVE to save a copy of the cropped photo. The original version is retained. Setting a Photo as a Contact Icon

.

>

1. Touch 2. Touch an album to open it. 3. Touch the photo to open it. 4. Press 5. Touch Set picture as. 6. Touch Contact photo. 7. 8. Touch the white box and crop the photo accordingly. 9. Touch SAVE. In the Contacts application, touch a contact. Get Photo Information

.

>

1. Touch 2. Touch an album to open it. 3. Touch the photo to open it. 4. Press

. 5. Touch Details. 6. Touch Close. Share a Photo

.

>

1. Touch 2. Touch an album to open it. 3. Touch a photo to open it. 4. Touch

. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 3 - 8 MC32N0 User Guide with Android v5.1.1 5. Touch the application to use to share the selected photo. The application selected opens with the photo attached to a new message. Deleting a Photo

.

>

1. Touch 2. Touch an album to open it. 3. Touch a photo to open it. 4. Touch 5. Touch OK to delete the photo. Working with Videos Use Gallery to view videos and share videos. Watching Videos

.

>

1. Touch 2. Touch an album to open it. 3. Touch a video. 4. Touch

. The video begins to play. Figure 3-7 Video Example 5. Touch the screen to view the playback controls. Sharing a Video

.

>

1. Touch 2. Touch an album to open it. 3. Touch a video to open it. 4. Touch 5. Touch the application to use to share the selected video. The application selected opens with the video

. The Share menu appears. attached to a new message. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Deleting a Video Applications 3 - 9

.

>

1. Touch 2. Touch an album to open it. 3. Touch a video to open it. 4. Touch 5. Touch OK to delete the video. DataWedge Demonstration Use DataWedge Demonstration to demonstrate data capture functionality. Figure 3-8 DataWedge Demonstration Window Figure 3-9 DataWedge Demonstration Icons Icon Not applicable. Description Indicates that the data capture function is through the imager. Select to enable picklist mode. Select to enable normal scan mode. Opens a menu to view the application information or to set the application DataWedge profile. NOTE See the MC32N0 Integrator Guide for information on DataWedge configuration. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 3 - 10 MC32N0 User Guide with Android v5.1.1 Either press a Scan key or touch the yellow scan button in the application to enable data capture. The captured data appears in the text field below the yellow button. Sound Recorder Use Sound Recorder to record audio messages. Recordings are saved on the microSD card (if installed) or the internal memory and available in the Music application playlist titled "My Recordings."

Figure 3-10 Sound Recorder Application PTT Express Voice Client NOTE PTT Express Voice Client creates Push-To-Talk (PTT) communication capability between disparate enterprise devices. Leveraging existing Wireless Local Area Network (WLAN) infrastructure, PTT Express delivers simple PTT communication without the need of a voice communication server. Group Call: Press and hold the Talk button (yellow Scan button on the MC32N0-G keypad or the right Scan button on MC32N0-R/S) to start communicating with other voice client users. Private Response: Press and release and then press and hold the Talk button to respond to the originator of the last group call. PTT Audible Indicators The following tones provide helpful cues when using the voice client. Talk Tone: Double chirp. Plays when the Talk button is depressed. This is a prompt for the user to start talking. Access Tone: Single beep. Plays when another user just finished a broadcast or response. The user is now able to initiate a Group Broadcast. Busy Tone: Continuous tone. Plays when the Talk button is depressed and another user is already communicating on the same talkgroup. Plays after the maximum allowed talk time is reached (60 seconds). REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Applications 3 - 11 Network Tone:

Three increasing pitch beeps. Plays when PTT Express has acquired the WLAN connection and the service is enabled. Three decreasing pitch beeps. Plays when PTT Express has lost the WLAN connection or the service is disabled. Notification Icon Service Notification Talk Groups Settings Enable/Disable Switch Figure 3-11 PTT Express Default User Interface Table 3-1 PTT Express Default user Interface Descriptions Item Notification Icon Service Indication Previous Profile Button Talk Group Speaker Icon Settings Description Indicates the current state of the PTT Express client. Indicates the status of the PTT Express client. Options: Service Enabled, Service Disabled or Service Unavailable. Scrolls to the previous profile screen. Lists Talk Groups available for PTT communication. Mutes and un-mutes the client. If muted, a call cannot be heard and initiated. Opens the PTT Express Settings screen. Enable/Disable Switch Turns the PTT service on and off. Next Profile Button Scrolls to the next profile screen. Profile Enable/Disable Checkbox Indicates that the profile is enabled (checked) or disabled (unchecked). Profile Name Displays the name of the current profile. Notification Icons Indicates the current state of the PTT Express Voice Client. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 3 - 12 MC32N0 User Guide with Android v5.1.1 Table 3-2 PTT Express Default Notification Icons Icon Description Indicates that PTT Express Voice client is disabled. Indicates that PTT Express Voice client is enabled but not connected to a WLAN. Indicates that PTT Express Voice client is enabled, connected to a WLAN and listening on the Talk Group indicated by the number next to the icon. Indicates that PTT Express Voice client is enabled, connected to a WLAN and communicating on the Talk Group indicated by the number next to the icon. Indicates that PTT Express Voice client is enabled, connected to a WLAN and in a private response. Indicates that PTT Express Voice client is enabled and muted. Indicates that the PTT Express Voice client is enabled but it is not able to communicate due to a VoIP telephony call is in progress. Enabling PTT Communication 1. Touch 2. Slide the Enable/Disable Switch to the ON position. The button changes to an ON button.

>

. PTT Communication NOTE This section describes the default PTT Express client configuration. See the PTT Express V1.2 User Guide for detailed information on using the client. PTT communication may be established as a Group Call. When PTT Express is enabled, the yellow Scan button on the keypad is assigned for PTT communication. Creating a Group Call 1. Press and hold the Scan button and listen for the talk tone to play. If a busy tone is heard, release the button and wait a moment before making another attempt. Ensure that PTT Express and the WLAN are enabled. 2. Start talking after the talk tone is heard. If the user holds the button for more than 60 seconds (default), the call is dropped allowing others to make Group calls. The user should release the button when finished talking to allow others to make calls. 3. Release the button when finished talking. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Applications 3 - 13 Responding with a Private Response The Private Response can only be initiated once a Group Call has been established. The initial Private Response is made to the originator of the Group Call. 1. Wait until an access tone is heard. 2. Press and release and then press and hold the Talk button and listen for the talk tone to play. If a busy tone is heard, release the button and wait a moment before making another attempt. Ensure that PTT Express and the WLAN are enabled. 3. Start talking after the talk tone plays. 4. Release the button when finished talking. Disabling PTT Express Voice Client Communication

.

>

1. Touch 2. Slide the Enable/Disable Switch to the OFF position. The button changes to OFF. 3. Press

. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 3 - 14 MC32N0 User Guide with Android v5.1.1 RxLogger RxLogger is a comprehensive diagnostic tool that provides application and system metrics. It allows for custom plug-ins to be created and work seamlessly with this tool. RxLogger is used to diagnose device and application issues. Its information tracking includes the following: CPU load, memory load, memory snapshots, battery consumption, power states, wireless logging, cellular logging, TCP dumps, Bluetooth logging, GPS logging, logcat, FTP push/pull, ANR dumps, etc. All logs and files generated are saved onto flash storage on the device (internal or external). Figure 3-12 RxLogger RxLogger Configuration RxLogger is built with an extensible plug-in architecture and comes packaged with a number of plugins already built-in. The included plug-ins are described below. Touch

> Settings to open the configuration screen. Configuration File RxLogger configuration can be set using an XML file. The config.xml configuration file is located on the Enterprise storage in the RxLogger\config folder. Copy the file from the device to a host computer using a USB connection. Edit the configuration file and the replace the .XML file on the device. There is no need to stop and restart the RxLogger service since the file change is automatically detected. Enabling Logging

>

1. Touch 2. Touch Start. 3. Press

. Disabling Logging

>

1. Touch 2. Touch Stop. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Applications 3 - 15 3. Press

. Extracting Log Files 1. Connect the device to a host computer using an USB connection. 2. Using a file explorer, navigate to the Internal Storage in the /RxLogger folder. 3. Copy the file from the device to the host computer. 4. Disconnect the device from the host computer. Elemez NOTE Elemez collects specific device information in the background and sends this information to us to help improve product functionality. This feature can be disabled. See Disabling Elemez Data Collection. Ensure that the date, time and time zone are set correctly prior to using Elemez. Use Elemez to provide diagnostics information to us. Touch Submit Diagnostics button to send the data. Figure 3-13 Elemez Application Disabling Elemez Data Collection The user can disable the Elemez application from collection specific data in the background and sending it to Zebra Technologies. 1. Press 2. Touch Manage Apps. 3. Swipe left or right until the ALL tab displays. 4. Scroll through the list and touch Elemez. 5. In the App info screen, touch Uninstall updates. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 3 - 16 MC32N0 User Guide with Android v5.1.1 In the Uninstall updates dialog box, touch OK. 6. 7. Touch OK. 8. After uninstall is complete, touch OK. In the All tab, scroll through the list and touch Elemez. 9. 10. Touch Disable. 11. In the Disable built-in app? dialog box, touch OK. 12. Press

. Enabling Elemez Data Collection The user can re-enable the Elemez application for collection specific data in the background and sending it to Zebra Technologies. 1. Press 2. Touch Manage Apps. 3. Swipe left or right until the ALL tab displays. 4. Scroll through the list and touch Elemez. 5. In the App info screen, touch Enable. 6. Press

. 7. Touch 8. Touch Enable Elemez.

>

. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY CHAPTER 4 DATA CAPTURE Introduction This chapter provides information for capturing bar code data using the internal camera and optional scan modules and Bluetooth scanner. The MC32N0 offers the following data capture options:

imager. laser scanner. RS507 Hands-free imager. NOTE DataWedge is installed and enabled on the MC32N0 by default. By default, the good decode beep is set to system volume (Music and Media). The good decode beep can be set to another sound (Notifications or Alarms) and the volume can be independently controlled. See the DataWedge section in the MC32N0 Integrator Guide for more information. Imager The device with an integrated imager has the following features:

Omnidirectional reading of a variety of bar code symbologies, including the most popular linear, postal, PDF417, and 2D matrix code types. Advanced intuitive laser aiming cross-hair for easy point-and-shoot operation. The modules uses digital camera technology to take a digital picture of a bar code, stores the resulting image in its memory, and executes state-of-the-art software decoding algorithms to extract the data from the image. Operational Modes The device with an integrated imager supports two modes of operation, listed below. Activate each mode by pressing a scan button. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 4 - 2 MC32N0 User Guide with Android v5.1.1 Decode Mode: In this mode, the device attempts to locate and decode enabled bar codes within its field of view. The imager remains in this mode as long as the user holds the scan button, or until it decodes a bar code. NOTE To enable Pick List Mode, configure in DataWedge. Pick List Mode: This mode allows the user to selectively decode a bar code when more than one bar code is in the devices field of view. To accomplish this, move the aiming crosshair over the required bar code to decode only this bar code. This feature is ideal for pick lists containing multiple bar codes and manufacturing or transport labels containing more than one bar code type (either 1D or 2D). Laser Scanner The MC32N0 with laser scanner has the following features:

Reading of a variety of bar code symbologies, including the most popular linear, postal, and 1-D code types. Intuitive aiming for easy point-and-shoot operation. RS507 Hands-Free Imager The RS507 Hands-free Imager is a wearable bar code scan solution for both 1D and 2D bar code symbologies. The scanner supports Simple Serial Interface (SSI) andBluetooth Human Interface Device (HID) connection to the device where the scanner emulates a keyboard. Figure 4-1 RS507 Hands-Free Imager See to the RS507 Hands-free Imager Product Reference Guide for more information. Scanning Considerations Typically, scanning is a simple matter of aim, scan, and decode where a few quick trial efforts master it. However, consider the following to optimize scanning performance:

Range Any scanning device decodes well over a particular working range minimum and maximum distances from the bar code. This range varies according to bar code density and scanning device optics. Scanning within range brings quick and constant decodes; scanning too close or too far away prevents decodes. Move the scanner closer and farther away to find the right working range for the bar codes being scanned. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Data Capture 4 - 3 Angle Scan angle is important for promoting quick decodes. When laser beams reflect directly back into the scanner from the bar code, this specular reflection can blind the scanner. To avoid this, scan the bar code so that the beam does not bounce directly back. But do not scan at too sharp an angle; the scanner needs to collect scattered reflections from the scan to make a successful decode. Practice quickly shows what tolerances to work within. Hold the device farther away for larger symbols. Move the device closer for symbols with bars that are close together. NOTE Scanning procedures depend on the application and device configuration. An application may use different scanning procedures from those described. Bar Code Capture with Imager To capture bar code data:

1. Ensure that an application is open on the device and a text field is in focus (text cursor in text field). 2. Point the top of the device at a bar code. Figure 4-2 Bar Code Scanning MC32N0G Figure 4-3 Bar Code Scanning MC32N0S 3. Press and hold the Scan button or Trigger. The red laser aiming pattern turns on to assist in aiming. 4. Ensure the bar code is within the area formed by the cross-hairs in the aiming pattern. The aiming dot is used for increased visibility in bright lighting conditions. The Scan LEDs light green and a beep sounds, by default, to indicate the bar code was decoded successfully. Note that when the device is in Pick List Mode, the device does not decode the bar code until the center of the crosshair touches the bar code. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 4 - 4 MC32N0 User Guide with Android v5.1.1 Figure 4-4 Aiming Pattern Figure 4-5 Pick List Mode with Multiple Bar Codes in Aiming Pattern 5. Release the scan button or Trigger. 6. The bar code content data appears in the text field. Bar Code Capture with Laser Scanner To capture bar code data:

1. Ensure that an application is open on the device and a text field is in focus (text cursor in text field). 2. On the MC32N0R, rotate the Turret for optimal scanning position. 3. Point the scan exit window at a bar code. Figure 4-6 Bar Code Scanning MC32N0R 4. Press and hold the Scan button. The red scan line turns on to assist in aiming. Ensure that the scan line crosses every bar and space of the bar code. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY The Scan LEDs light green and a beep sounds, by default, to indicate the bar code was decoded successfully. Data Capture 4 - 5 Figure 4-7 Linear Scanner Aiming Pattern 5. Release the scan button. 6. The captured data appears in the text field. Bar Code Capture with RS507 Hands-Free Imager Pair the RS507 with the MC32N0. See Pairing the RS507 Hands-Fee Imager Using SSI on page 4-6 or Pairing the RS507 Hands-Free Imager Bluetooth HID on page 4-7. 1. Ensure that an application is open on the device and a text field is in focus (text cursor in text field). 2. Point the RS507 at a bar code. Figure 4-8 Bar Code Scanning with RS507 3. Press and hold the trigger. The red laser aiming pattern turns on to assist in aiming. Ensure the bar code is within the area formed by the cross-hairs in the aiming pattern. The aiming dot is used for increased visibility in bright lighting conditions. The RS507 LEDs light green, a beep sounds to indicate the bar code was decoded successfully. Note that when the RS507 is in Pick List Mode, the RS507 does not decode the bar code until the center of the crosshair touches the bar code. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 4 - 6 MC32N0 User Guide with Android v5.1.1 Figure 4-9 Aiming Pattern Figure 4-10 Pick List Mode with Multiple Bar Codes in Aiming Pattern 4. The captured data appears in the text field. Pairing the RS507 Hands-Fee Imager Using SSI An RS507 Hands-free Imager can be used with the device to capture bar code data. 1. Ensure that the two devices are within 10 meters (32.8 feet) of one another. 2. Install the battery into the RS507. 3. On the MC32N0, touch

>

. Figure 4-11 Bluetooth Pairing Utility REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Data Capture 4 - 7 4. Using the RS507, scan the bar code on the screen. The RS507 emits a high/low/high/low beeps. The Scan LED flashes green indicating that the RS507 is attempting to establish connection with the MC32N0. When connection is established, the Scan LED turns off and the RS507 emits one string of low/high beeps. 5. On the MC32N0, touch

. Pairing the RS507 Hands-Free Imager Bluetooth HID An RS507 Hands-free Imager can be used with the device to capture bar code data. 1. Ensure that Bluetooth is enabled on both devices. 2. Ensure that the Bluetooth device to discover is in discoverable mode. 3. Ensure that the two devices are within 10 meters (32.8 feet) of one another. 4. Place the RS507 in Human Interface Device (HID) mode. If the RS507 is already in HID mode, skip to step 5. a. Remove the battery from the RS507. b. Press and hold the Restore key. c. d. Keep holding the Restore key for about five seconds until a chirp is heard and the Scan LEDs flash green. e. Scan the bar code below to place the RS507 in HID mode. Install the battery onto the RS507. Figure 4-12 RS507 Bluetooth HID Bar Code 5. Remove the battery from the RS507. 6. Re-install the battery into the RS507. 7. On the MC32N0, touch

>

. 8. Touch 9. Touch SCAN FOR DEVICES. The device begins searching for discoverable Bluetooth devices in the area and Bluetooth. displays them under AVAILABLE DEVICES. 10. Scroll through the list and select RS507. The device connects to the RS507 and Connected appears below the device name. The Bluetooth device is added to the Bluetooth devices list and a trusted (paired) connection is established. DataWedge DataWedge is a utility that adds advanced bar code scanning capability to any application without writing code. It runs in the background and handles the interface to built-in bar code scanners. The captured bar code data is converted to keystrokes and sent to the target application as if it was typed on the keypad. To configure DataWedge refer to the MC32N0 Integrator Guide. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 4 - 8 MC32N0 User Guide with Android v5.1.1 Enabling DataWedge 1. Touch

>

. 2. Press 3. Touch Settings. 4. Touch the DataWedge enabled checkbox. A blue checkmark appears in the checkbox indicating that DataWedge is enabled. 5. Press

. Disabling DataWedge 1. Touch

>

. 2. Press 3. Touch Settings. 4. Touch the DataWedge enabled checkbox. The blue checkmark disappears from the checkbox indicating that DataWedge is disabled. 5. Press

. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY CHAPTER 5 WIRELESS Introduction This section provides information on the wireless features:

Wireless Local Area Network (WLAN) Bluetooth Wireless Local Area Networks Wireless local area networks (WLANs) allow the MC32N0 to communicate wirelessly inside a building. Before using the MC32N0 on a WLAN, the facility must be set up with the required hardware to run the WLAN (sometimes known as infrastructure). The infrastructure and the MC32N0 must both be properly configured to enable this communication. Refer to the documentation provided with the infrastructure (access points (APs), access ports, switches, Radius servers, etc.) for instructions on how to set up the infrastructure. Once the infrastructure is set up to enforce the chosen WLAN security scheme, use the Wireless & networks settings configure the MC32N0 to match the security scheme. The MC32N0 supports the following WLAN security options:

Open Wireless Equivalent Privacy (WEP) Wi-Fi Protected Access (WPA)/WPA2 Personal (PSK) Extensible Authentication Protocol (EAP) LEAP FAST - with Microsoft Challenge-Handshake Authentication Protocol version 2 (MSCHAPv2) and Generic Token Card (GTC) authentication. Protected Extensible Authentication Protocol (PEAP) - with MSCHAPV2 and GTC authentication. Transport Layer Security (TLS) TTLS - with Password Authentication Protocol (PAP), MSCHAP and MSCHAPv2 authentication. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 5 - 2 MC32N0 User Guide with Android v5.1.1 The Status bar displays icons that indicate Wi-Fi network availability and Wi-Fi status. See Status Bar on page 2-2 for more information. NOTE Turn off Wi-Fi when not using it, to extend the life of the battery. Scan and Connect to a Wi-Fi Network 1. Touch

>

. 2. Touch Wi-Fi. Figure 5-1 Settings Screen 3. Slide the Wi-Fi switch to the ON position. The MC32N0 searches for WLANs in the area and lists them. Figure 5-2 Wi-Fi Screen 4. Scroll through the list and select the desired WLAN network. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Wireless 5 - 3 5. For open networks, touch profile once or press and hold and then select Connect to network or for secure networks enter the required password or other credentials then touch Connect. See the system administrator for more information. The MC32N0 obtains a network address and other required information from the network using the dynamic host configuration protocol (DHCP) protocol. To configure the MC32N0 with a fixed internet protocol (IP) address, See Configuring the Device to Use a Static IP Address on page 5-6. In the Wi-Fi setting field, Connected appears indicating that the MC32N0 is connected to the WLAN. 6. Configuring a Wi-Fi Network To set up a Wi-Fi network:

1. Touch

>

. Wi-Fi. 2. Touch 3. Slide the switch to the ON position. The device searches for WLANs in the area and lists them on the screen. 4. Scroll through the list and select the desired WLAN network. 5. Touch the desired network. If the network security is Open, the device automatically connects to the network. For all other network security a dialog box appears. Figure 5-3 WLAN Network Security Dialog Box 6. If the network security is WEP or WPA/WPS2 PSK, enter the required password and then touch Connect. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 5 - 4 MC32N0 User Guide with Android v5.1.1 Figure 5-4 802.1x EAP Security Dialog Box 7. If the network security is 802.1x EAP:

Touch the EAP method drop-down list and select PEAP, TLS, TTLS or PWD. Touch the Phase 2 authentication drop-down list and select an authentication method. If required, touch CA certificate and select a Certification Authority (CA) certificate. Note: Certificates are installed using the Security settings. If required, touch User certificate and select a user certificate. Note: User certificates are installed using the Security settings. If required, in the Identity text box, enter the username credentials. If desired, in the Anonymous identity text box, enter an anonymous identity username. If required, in the Password text box, enter the password for then given identity. NOTE By default, the network Proxy is set to None and the IP settings is set to DHCP. See Configuring for a Proxy Server on page 5-5 for setting connection to a proxy server and see Configuring the Device to Use a Static IP Address on page 5-6 for setting the device to use a static IP address. 8. Touch Connect. 9. Press

. Manually Adding a Wi-Fi Network Manually add a Wi-Fi network if the network does not broadcast its name (SSID) or to add a Wi-Fi network when out of range. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Wireless 5 - 5 1. Touch

>

. 2. Touch 3. Slide the Wi-Fi switch to the On position. Wi-Fi. 4. Press 5. Touch Add Network 6. 7. 8. 9. 10. In the Network name text box, enter the name of the Wi-Fi network. In the Security drop-down list, select the type of security. Options:

None WEP WPA/WPA2 PSK 802.1x EAP. If the network security is None, touch Save. If the network security is WEP or WPA/WPA2 PSK, enter the required password and then touch Save. If the network security is 802.1x EAP:

Touch the EAP method drop-down list and select PEAP, TLS, PWD or TTLS. Touch the Phase 2 authentication drop-down list and select an authentication method. If required, touch CA certificate and select a Certification Authority (CA) certificate. Note: Certificates are installed using the Security settings. If required, touch User certificate and select a user certificate. Note: User certificates are installed using the Security settings. If required, in the Identity text box, enter the username credentials. If desired, in the Anonymous identity text box, enter an anonymous identity username. If required, in the Password text box, enter the password for then given identity. NOTE By default, the network Proxy is set to None and the IP settings is set to DHCP. See Configuring for a Proxy Server on page 5-5 for setting connection to a proxy server and see Configuring the Device to Use a Static IP Address on page 5-6 for setting the device to use a static IP address. 11. Touch Save. To connect to the saved network, touch the saved network and select Connect. 12. Press

. Configuring for a Proxy Server A proxy server is a server that acts as an intermediary for requests from clients seeking resources from other servers. A client connects to the proxy server, requesting some service, such as a file, connection, web page, or other resource, available from a different server. The proxy server evaluates the request according to its filtering rules. For example, it may filter traffic by IP address or protocol. If the request is validated by the filter, the proxy provides the resource by connecting to the relevant server and requesting the service on behalf of the client. It is important for enterprise customers to be able to set up secure computing environments within their companies, and proxy configuration is an essential part of doing that. Proxy configuration acts as a security barrier ensuring that the proxy server monitors all traffic between the Internet and the intranet. This is normally an integral part of security enforcement in corporate firewalls within intranets. 1. In the Wi-Fi list, touch a network. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 5 - 6 MC32N0 User Guide with Android v5.1.1 2. Touch Advanced options checkbox. 3. Touch Proxy and select Manual. Figure 5-5 Proxy Settings 4. 5. In the Proxy hostname text box, enter the address of the proxy server. In the Proxy port text box, enter the port number for the proxy server. NOTE When entering proxy addresses the Bypass proxy for field, do not use spaces or carriage returns between addresses. 6. In the Bypass proxy for text box, enter addresses for web sites that do not require to go through the proxy server. Use a comma , between addresses. When entering proxy addresses the Bypass proxy for field, do not use spaces or carriage returns between addresses. 7. Touch Connect. 8. Press

. Configuring the Device to Use a Static IP Address By default, the device is configured to use Dynamic Host Configuration Protocol (DHCP) to assign an Internet protocol (IP) address when connecting to a wireless network. To configure the device to connect to a network using a static IP address:

In the Wi-Fi list, touch a network. 1. 2. Touch Advanced options checkbox. 3. Touch IP settings and select Static. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Wireless 5 - 7 Figure 5-6 Static IP Settings In the IP address text box, enter an IP address for the device. If required, in the Gateway text box, enter a gateway address for the device. If required, in the Network prefix length text box, enter a the prefix length. If required, in the DNS 1 text box, enter a Domain Name System (DNS) address. If required, in the DNS 2 text box, enter a DNS address. 4. 5. 6. 7. 8. 9. Touch Connect. 10. Press

. Advanced Wi-Fi Settings NOTE Advanced Wi-Fi settings are for the device not for a specific wireless network. Use the Advanced settings to configure additional Wi-Fi settings. Press advanced settings.

> touch Advanced to view the Network notification - When enabled, notifies the user when an open network is available. Scanning always available - Select to let Googles location service and other applications scan for networks, even when Wi-Fi is off. (default - disabled). Keep Wi-Fi on during sleep - Opens a menu to set whether and when the Wi-Fi radio turns off. Always On - The radio stays on when the device enters suspend mode. Only when plugged in - The radio stays on while the device is connected to external power. Never On - The radio turns off when the device enters suspend mode (default). Wi-Fi frequency band - Options: Automatic (default), 5 GHz only or 2.4 GHz only. MAC address - Displays the Media Access Control (MAC) address of the device when connecting to Wi-Fi Install Certificates - Touch to install certificates. networks. IP address - Displays the IP address of the device. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 5 - 8 MC32N0 User Guide with Android v5.1.1 Additional Settings Use the Additional Settings to configure additional Wi-Fi settings. From the Wi-Fi screen, Press Additional Settings to view the additional settings.

> touch Regulatory Country selection - Displays the acquired country code if 802.11d is enabled else it displays the currently selected country code. Region code - Displays the current region code. Band and Channel Selection Wi-Fi frequency band - Use to select the frequency band. Options: Auto (default), 5 GHz only or 2.4 GHz only. Available channels (2.4 GHz) - Use to select specific channels. Touch to display the Available channels menu. Select specific channels. Touch OK. Available channels (5 GHz) - Use to select specific channels. Touch to display the Available channels menu. Select specific channels. Touch OK. Logging Advanced Logging - Provides support for continuous capture of system logs to a file to help in debugging and resolution of Wi-Fi related issues. Disabled by default. In the Advanced Logging dialog box, select Enable Logging. If desired, change the log directory location. When enabled, the following log are captured:

NOTE The MC32N0 must have a microSD card installed. All log files are saved in /storage/sdcard0/fusionlogs on the MC32N0. Fusion will ask the user whether he wants to clear out previous logs before starting logging. tcpdump capture file and fusion-sysinfo.log will only be generated when advanced logging is stopped. Android logcat output with time stamps and the kernel messages in the file: fusion-wlan.log. tcpdump intermediate capture of packets between network stack and driver in the file:

fusion-pktcap.pcap Fusion versions, Wi-Fi state machine logs and other framework information in the file:

fusion-sysinfo.log. Wireless logs - Use to capture Wi-Fi log files. Fusion Logger - Touch to open the Fusion Logger application. This application maintains a history of high level WLAN events which helps to understand the status of connectivity. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Wireless 5 - 9 Figure 5-7 Fusion Logger Screen Fusion Status - Touch to display live status of WLAN state. Also provides information of device and connected profile. Figure 5-8 Fusion Status Screen About Version - Displays the current Fusion information. Remove a Wi-Fi Network To remove a remembered or connected network:

1. Touch

>

. Wi-Fi. 2. Touch 3. 4. In the Wi-Fi networks list, touch and hold the name of the network. In the menu, touch Forget network. 5. Press

. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 5 - 10 MC32N0 User Guide with Android v5.1.1 Bluetooth Bluetooth-equipped devices can communicate without wires, using frequency-hopping spread spectrum (FHSS) radio frequency (RF) to transmit and receive data in the 2.4 GHz Industry Scientific and Medical (ISM) band

(802.15.1). Bluetooth wireless technology is specifically designed for short-range (10 meters (32.8 feet) ) communication and low power consumption. Devices with Bluetooth capabilities can exchange information (e.g., files, appointments, and tasks) with other Bluetooth enabled devices such as printers, access points, and other mobile devices. Adaptive Frequency Hopping Adaptive Frequency Hopping (AFH) is a method of avoiding fixed frequency interferers, and can be used with Bluetooth voice. All devices in the piconet (Bluetooth network) must be AFH-capable in order for AFH to work. There is no AFH when connecting and discovering devices. Avoid making Bluetooth connections and discoveries during critical 802.11b communications. AFH for Bluetooth consists of four main sections:

Channel Classification - A method of detecting an interference on a channel-by-channel basis, or pre-defined channel mask. Link Management - Coordinates and distributes the AFH information to the rest of the Bluetooth network. Hop Sequence Modification - Avoids interference by selectively reducing the number of hopping channels. Channel Maintenance - A method for periodically re-evaluating the channels. When AFH is enabled, the Bluetooth radio hops around (instead of through) the 802.11b high-rate channels. AFH coexistence allows Enterprise devices to operate in any infrastructure. The Bluetooth radio in this device operates as a Class 2 device power class. The maximum output power is 2.5 mW and the expected range is 10 meters (32.8 ft.). A definition of ranges based on power class is difficult to obtain due to power and device differences, and whether one measures open space or closed office space. NOTE It is not recommended to perform Bluetooth wireless technology inquiry when high rate 802.11b operation is required. Security The current Bluetooth specification defines security at the link level. Application-level security is not specified. This allows application developers to define security mechanisms tailored to their specific need. Link-level security occurs between devices, not users, while application-level security can be implemented on a per-user basis. The Bluetooth specification defines security algorithms and procedures required to authenticate devices, and if needed, encrypt the data flowing on the link between the devices. Device authentication is a mandatory feature of Bluetooth while link encryption is optional. Pairing of Bluetooth devices is accomplished by creating an initialization key used to authenticate the devices and create a link key for them. Entering a common personal identification number (PIN) in the devices being pairedgenerates the initialization key. The PIN is never sent over the air. By default, the Bluetooth stack responds with no key when a key is requested (it is up to user to respond to the key request event). Authentication of Bluetooth devices is based-upon a challenge-response transaction. Bluetooth allows for a PIN or passkey used to create other 128-bit keys used for security and encryption. The encryption key is derived from the link key used to authenticate the pairing devices. Also worthy of note is the limited range and fast frequency hopping of the Bluetooth radios that makes long-distance eavesdropping difficult. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Wireless 5 - 11 Recommendations are:

Perform pairing in a secure environment Keep PIN codes private and do not store the PIN codes in the device Implement application-level security. Bluetooth Profiles The MC32N0 supports the following Bluetooth services:

Generic Access Profile (GAP) - Use for device discovery and authentication. Service Discovery Access Protocol (SDP) - Handles the search for known and specific services as well as general services. Serial Port Profile (SPP) - Sets up a virtual serial port and connects two Bluetooth enabled devices. For example, connecting the MC32N0 to a printer. Human Interface Device Profile (HID) - Allows Bluetooth keyboards, pointing devices, gaming devices and remote monitoring devices to connect to the MC32N0. Dial-up Networking (DUN) - Allows the MC32N0 to access the Internet and other dial-up services using a Bluetooth enabled mobile phone. Personal Area Network (PAN) - Allow the use of Bluetooth Network Encapsulation Protocol on Layer 3 protocols for transport over a Bluetooth link. General Object Exchange Profile (GOEP) - Provides a basis for other data profiles. Based on OBEX and sometimes referred to as such. Headset Profile (HSP) - Allows a hands-free device, such as a Bluetooth headset, to place and receive calls on the MC32N0. Bluetooth Power States The Bluetooth radio is off by default. Suspend - When the MC32N0 goes into suspend mode, the Bluetooth radio stays on. Airplane Mode - When the MC32N0 is placed in Airplane Mode, the Bluetooth radio turns off. When Airplane mode is disabled, the Bluetooth radio returns to the prior state. When in Airplane Mode, the Bluetooth radio can be turned back on if desired. Bluetooth Radio Power Turn off the Bluetooth radio to save power or if entering an area with radio restrictions (e.g., an airplane). When the radio is off, other Bluetooth devices cannot see or connect to the device. Turn on the Bluetooth radio to exchange information with other Bluetooth devices (within range). Communicate only with Bluetooth radios in close proximity. NOTE To achieve the best battery life turn off radios when not in use. Enabling Bluetooth 1. Touch

>

. 2. Touch Bluetooth. 3. Slide the Bluetooth switch to the ON position. also appears in the Status bar. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 5 - 12 MC32N0 User Guide with Android v5.1.1 4. Press

. Disabling Bluetooth 1. Touch

>

. 2. Touch 3. Slide the Bluetooth switch to the OFF position. Bluetooth. 4. Press

. Discovering Bluetooth Device(s) The MC32N0 can receive information from discovered devices without pairing. However, once paired, the MC32N0 and a paired device exchange information automatically when the Bluetooth radio is on. To find Bluetooth devices in the area:

1. Ensure that Bluetooth is enabled on both devices. 2. Ensure that the Bluetooth device to discover is in discoverable mode. 3. Ensure that the two devices are within 10 meters (32.8 feet) of one another. 4. Touch

>

. 5. Touch Bluetooth. The MC32N0 begins searching for discoverable Bluetooth devices in the area and displays them under Available Devices. 6. Scroll through the list and select a device. The Bluetooth pairing request dialog box appears. Figure 5-9 Bluetooth Pairing 7. Touch Pair on both devices. 8. The Bluetooth device is added to the Bluetooth devices list and a trusted (paired) connection is established. Changing the Bluetooth Name By default, the MC32N0 has a generic Bluetooth name that is visible to other devices when connected. 1. Touch

>

. 2. Touch 3. Bluetooth. If Bluetooth is not on, slide the switch to the ON position. 4. Touch

. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY Wireless 5 - 13 5. Touch Rename device. 6. Enter a name and touch Rename. 7. Press

. Connecting to a Bluetooth Device Once paired, connect to a Bluetooth device. 1. Touch

>

. Bluetooth. 2. Touch 3. 4. If Bluetooth is not on, slide the switch to the ON position. In the Paired Devices list, touch an unconnected Bluetooth device. When connected, the device is displayed as connected in the list. Selecting Profiles on the Bluetooth Device Some Bluetooth devices have multiple profiles. To select a profile:

1. Touch

>

. 2. Touch Bluetooth. In the Paired Devices list, touch 3. 4. Under Use for, check or uncheck a profile to allow the device to use that profile. next to the device name. 5. Press

. Unpairing a Bluetooth Device To unpair a Bluetooth device and erase all pairing information:

1. Touch

>

. 2. Touch Bluetooth. In the Paired Devices list, touch 3. 4. Touch FORGET. next to the device name. 5. Press

. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 5 - 14 MC32N0 User Guide with Android v5.1.1 REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY CHAPTER 6 ACCESSORIES Introduction This chapter provides information for using the accessories for the device. MC32N0 Accessories The table below lists the accessories available for the MC32N0. Table 6-1 MC32N0 Accessories Accessory Part Number Description Cradles Single Slot Serial /USB Cradle CRD3000-1001RR Charges the MC32N0 main battery and a spare battery, and synchronizes the MC32N0 with a host computer through either a serial or USB connection. Four Slot Charge Only Cradle Chargers Four Slot Spare Battery Charger SAC7X00-4000CR CHS3000-4001CR Charges up to four MC32N0s. Battery Adapter ADP-MC32CUP0-01 Charges up to four MC32N0 spare batteries. Allows for charging of MC32N0 batteries in the Four Slot Spare Battery Charger, Single Slot USB cradle and UBC Adapter

(Single-pack). ADP-MC32CUP0-04

(4pack). REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY 6 - 2 MC32N0 User Guide with Android v5.1.1 Table 6-1 MC32N0 Accessories (Continued) Accessory Universal Battery Charger (UBC) Base Part Number UBC2000-I500DES MC3XXX Universal Battery Charger (UBC) Adapter 21-32665-45AR Power Supply for Single Slot Serial/USB Cradle PWRS-14000148R Power Supply for Four Slot Cradle PWRS-14000-241R Power Supply for Four Slot battery Charger PWRS-14000242R Power Supply for Charging Cables PWRS-14000-249R US AC Line Cord 23844-00-00R International AC Line Cord US AC Line Cord International AC Line Cord DC Line Cord 5016000271R 5016000218R 5016000219R 5016000220R 5016000221R 5016000256R 5016000257R 5016000669R 5016000671R 5016000672R 5016000678R 5016000727R 50-16000-182R 5016000255R 5016000664R 5016000666R 5016000670R 5016002029R Description Charges up to four MC32N0 spare batteries. Requires UBC Adapter and Battery Adapter. Charges a single MC32N0 battery. Requires Battery Adapter. Use in conjunction with the UBC Base to charge multiple batteries. Provides power to the Single Slot Serial/USB cradle. Provides power to the Four Slot Charge Only Provides power to the Four Slot Spare Battery Charger. Provides power to the Charge Only cable, RS232 Charge cable and USB Client Charge cable. Provides power to 3wire power supplies PWRS-14000148R and PWRS-14000241R. Provides power to 3wire power supplies PWRS-14000148R and PWRS-14000241R. Provides power to the 2-wire power supply PWRS-14000249R. Provides power to the 2-wire power supply PWRS-14000249R. Provides power from power supply to the Four Slot Charge Only cradle. REVIEW ONLY - REVIEW ONLY - REVIEW ONLY REVIEW ONLY - REVIEW ONLY - REVIEW ONLY

MC32N0 SERIES REGULATORY GUIDE Motorola Solutions reserves the right to make changes to any product to improve reliability, function, or design. Motorola Solutions does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, apparatus, machine, material, method, or process in which Motorola Solutions products might be used. An implied license exists only for equipment, circuits, and subsystems contained in Motorola Solutions products. Warranty For the complete Motorola Solutions hardware product warranty statement, go to:

http://www.motorolasolutions.com/warranty. Service Information If you have a problem using the equipment, contact your facilitys Technical or Systems Support. If there is a problem with the equipment, they will contact the Motorola Solutions Global Customer Support at: http://

www.motorolasolutions.com/support. For the latest version of this guide go to: http://www.motorolasolutiuons.com/

support. Motorola Solutions, Inc. 1301 E. Algonquin Rd. Schaumburg, IL 60196-1078, U.S.A. http://www.motorolasolutions.com MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. 2014 Motorola Solutions, Inc. All Rights Reserved. MN000216A01 Rev. A - February 2014 Regulatory Information This device is approved under Motorola Solutions, Inc. This guide applies to Model Number MC32N0. All Motorola devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Local language translations are available at the following website: http://www.motorolasolutions.com/support. Any changes or modifications to Motorola equipment, not expressly approved by Motorola, could void the user's authority to operate the equipment. Antennas: Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could cause damage and may violate regulations. CAUTION Only use Motorola approved and UL Listed accessories, battery packs and battery chargers. Do NOT attempt to charge damp/wet mobile computers or batteries. All components must be dry before connecting to an external power source. Declared maximum operating temperature: 50C. Radio Modules The device contains approved radio module. The module is identified below. Motorola WLAN radio 802.11 a/b/g/n and BT Technology, Type: 21-148603. Bluetooth Wireless Technology This is an approved Bluetooth product. For more information or to view the End Product Listing, please visit http://

www.bluetooth.org/tpg/listings.cfm. Wireless Device Country Approvals Regulatory markings, subject to certification, are applied to the device signifying the radio(s) is/are approved for use in the following countries: United States, Canada, Japan, China, S. Korea, Australia, and Europe. Please refer to the Declaration of Conformity (DoC) for details of other country markings. This is available at http://

www.motorolasolutions.com/doc. Note: Europe includes, Austria, Belgium, Bulgaria, Czech Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Operation of the device without regulatory approval is illegal. Country Roaming This device incorporates the International Roaming feature

(IEEE802.11d) which will ensure the product operates on the correct channels for the particular country of use. Ad-Hoc Operation (5 GHz band) Ad-Hoc operation is limited to Channels 36-48 (5150-5250 MHz). Use of this band is restricted to Indoor Use Only, any other use will make the operation of this device illegal. Frequency of Operation - FCC and IC 5 GHz Only The use in the UNII (Unlicensed National Information Infrastructure) band 1 (5150 - 5250 MHz) is restricted to Indoor Use Only; any other use will make the operation of this device illegal. Industry Canada Statement:

Caution: The device for the band 5150 - 5250 MHz is only for indoor usage to reduce potential for harmful interference to co-

Channel mobile satellite systems. High power radars are allocated as primary users (meaning they have priority) of 5250 - 5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices. Avertissement: Le dispositive fonctionnant dans la bande 5150 - 5250 MHz est rserv uniquement pour une utilisation l'intrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. Les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., qu'ils ont la priorit) pour les bands 5250 - 5350 MHz et 5650 - 5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. Health and Safety Recommendations Ergonomic Recommendations CAUTION In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your local Health & Safety Manager to ensure that you are adhering to your companys safety programs to prevent employee injury. Improve work procedures. Reduce or eliminate repetitive motion Maintain a neutral posture Reduce or eliminate excessive force Keep objects that are used frequently within easy reach Perform tasks at correct heights Reduce or eliminate vibration Reduce or eliminate direct pressure Provide adjustable workstations Provide adequate clearance Provide a suitable working environment Safety on the Road Do not take notes or use the device while driving. Jotting down a to do list or flipping through your address book takes attention away from your primary responsibility, driving safely. When driving a car, driving is your first responsibility - Give full attention to driving. Check the laws and regulations on the use of wireless devices in the areas where you drive. Always obey them. When using a wireless device behind the wheel of a car, practice good common sense and remember the following tips:

1. Get to know your wireless device and any features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road. 2. When available, use a hands free device. 3. Let the person you are speaking with know you are driving;

if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be hazardous. 4. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue. 5. Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations that have the potential to divert your attention from the road. 6. Use your wireless phone to call for help. Dial the Emergency services, (9-1-1 in the US, and 1-1-2 in Europe) or other local emergency number in the case of fire, traffic accident or medical emergencies. Remember, it is a free call on your wireless phone! The call can be made regardless of any security codes and depending on a network, with or without a SIM card inserted. 7. Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call the Emergency Services, (9-1-1 in the US, and 1-1-2 in Europe) or other local emergency number, as you would want others to do for you. 8. Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number. The wireless industry reminds you to use your device / phone safely when driving. Warnings for Use of Wireless Devices Please observe all warning notices with regard to the usage of wireless devices. Potentially Hazardous Atmospheres - Vehicles Use You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants etc. and areas where the air contains chemicals or particles (such as grain, dust, or metal powders) and any other area where you would normally be advised to turn off your vehicle engine. Safety in Aircraft Switch off your wireless device whenever you are instructed to do so by airport or airline staff. If your device offers a 'flight mode' or similar feature, consult airline staff as to its use in flight. Safety in Hospitals Wireless devices transmit radio frequency energy and may affect medical electrical equipment. Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics or healthcare facilities. These requests are designed to prevent possible interference with sensitive medical equipment. Pacemakers Pacemaker manufacturers recommended that a minimum of 15 cm (6 inches) be maintained between a handheld wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with independent research and recommendations by Wireless Technology Research. Persons with pacemakers:

Should ALWAYS keep the device more than 15 cm (6 inches) from their pacemaker when turned ON. Should not carry the device in a breast pocket. Should use the ear furthest from the pacemaker to minimize the potential for interference. If you have any reason to suspect that interference is taking place, turn OFF your device. Other Medical Devices Please consult your physician or the manufacturer of the medical device, to determine if the operation of your wireless product may interfere with the medical device. RF Exposure Guidelines Safety Information Reducing RF Exposure - Use Properly Only operate the device in accordance with the instructions supplied. International The device complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices. For information on International human exposure to electromagnetic fields refer to the Motorola Declaration of Conformity (DoC) at http://www.motorolasolutions.com/doc. For further information on the safety of RF energy from wireless devices - see http://

responsibility.motorolasolutions.com/index.php/downloads/

located under Wireless Communications and Health. Europe Handheld Devices This device was tested for typical body-worn operation. Use only Motorola tested and approved belt-clips, holsters, and similar accessories to ensure EU Compliance. US and Canada Co-located Statement To comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must not be co-located or operating in conjunction with any other transmitter/antenna except those already approved in this filing. Handheld Devices This device was tested for typical body-worn operation. Use only Motorola tested and approved belt-clips, holsters, and similar accessories to ensure FCC Compliance. The use of third-party belt-clips, holsters, and similar accessories may not comply with FCC RF exposure compliance requirements, and should be avoided. To satisfy US and Canadian RF exposure requirements, a transmitting device must operate with a minimum separation distance of 0 cm or more from a person's body. Pour satisfaire aux exigences Amricaines et Canadiennes d'exposition aux radiofrquences, un dispositif de transmission doit fonctionner avec une distance de sparation minimale de 0 cm ou plus de corps d'une personne. Laser Devices Class 2 laser scanners use a low power, visible light diode. As with any very bright light source, such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful. The following statement is required to comply with US and international regulations. Caution: Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous laser light exposure. Scanner Labeling 1 2 1 2 1 3 3 2 1 3 Labels Read:

1. LASER LIGHT-DO NOT STARE INTO BEAM. CLASS 2 LASER PRODUCT 2. CAUTION-CLASS 2 LASER LIGHT WHEN OPEN. DO NOT STARE INTO THE BEAM 3. COMPLIES WITH 21 CFR1040.10 AND 1040.11 EXCEPT FOR DEVIATIONS PURSUANT TO LASER NOTICE NO. 50, DATED JUNE 24, 2007, AND IEC 60825-1 (Ed.2.0), EN60825-1:2007. Batteries Taiwan - Recycling EPA (Environmental Protection Administration) requires dry battery producing or importing firms in accordance with Article 15 of the Waste Disposal Act are required to indicate the recycling marks on the batteries used in sales, giveaway or promotion. Contact a qualified Taiwanese recycler for proper battery disposal. Battery Information CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of batteries according to instructions. Use only Motorola approved batteries. Accessories which have battery charging capability are approved for use with the following battery models:

Motorola 82-000011-01 (3.7 VDC, 2740 mAh) Motorola 82-000012-01 (3.7 VDC, 4800 mAh) Motorola rechargeable battery packs are designed and constructed to the highest standards within the industry. However, there are limitations to how long a battery can operate or be stored before needing replacement. Many factors affect the actual life cycle of a battery pack, such as heat, cold, harsh environmental conditions and severe drops. When batteries are stored over six (6) months, some irreversible deterioration in overall battery quality may occur. Store batteries at half of full charge in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of metallic parts and electrolyte leakage. When storing batteries for one year or longer, the charge level should be verified at least once a year and charged to half of full charge. Replace the battery when a significant loss of run time is detected. Standard warranty period for all Motorola batteries is one year, regardless if the battery was purchased separately or included as part of the mobile computer. For more information on Motorola batteries, please visit: http:/

mysymbolcare.symbol.com/battery/batbasics1.html Battery Safety Guidelines The area in which the units are charged should be clear of debris and combustible materials or chemicals. Particular care should be taken where the device is charged in a non commercial environment. Follow battery usage, storage, and charging guidelines found in the user's guide. Improper battery use may result in a fire, explosion, or other hazard. To charge the mobile device battery, the battery and charger temperatures must be between 0 C and +40 C

(+32 F and +104 F) Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present a risk of fire, explosion, leakage, or other hazard. If you have any questions about the compatibility of a battery or a charger, contact Motorola Solutions Global Customer Support. Do not disassemble or open, crush, bend or deform, puncture, or shred. Severe impact from dropping any battery-operated device on a hard surface could cause the battery to overheat. Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals. Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, or expose to fire, explosion, or other hazard. Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle or near a radiator or other heat source. Do not place battery into a microwave oven or dryer. Battery usage by children should be supervised. Please follow local regulations to promptly dispose of used re-chargeable batteries. Do not dispose of batteries in fire. Seek medical advice immediately if a battery has been swallowed. In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with large amounts of water and seek medical advice. If you suspect damage to your equipment or battery, contact Motorola Solutions Global Customer Support to arrange for inspection. Use with Hearing Aids When some wireless devices are used near some hearing devices (hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise, and wireless devices also vary in the amount of interference they generate. In the event of interference you may want to consult your hearing aid supplier to discuss solutions. Hearing Aid Compatibility This device does not support Voice Over IP (VOIP) calls. Radio Frequency Interference Requirements-

FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help. Radio Transmitters (Part 15) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The use of 5 GHz WLAN's, for use in the US , have the following restrictions:

Notched Band 5.60 - 5.65 GHz Radio Frequency Interference Requirements - Canada This Class B digital apparatus complies with Canadian ICES-

003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Radio Transmitters For RLAN Devices:

The use of 5 GHz RLAN's, for use in Canada, have the following restrictions:

Restricted Band 5.60 - 5.65 GHz This device complies with RSS 210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes:

(1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Label Marking: The Term IC: before the radio certification only signifies that Industry Canada technical specifications were met. Marking and European Economic Area

(EEA) The use of 2.4 GHz RLAN's, for use through the EEA, have the following restrictions:

Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 - 2.4835 GHz. Italy requires a user license for outside usage. Bluetooth Wireless Technology for use through the EEA has the following restrictions:

Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 - 2.4835 GHz. Italy requires a user license for outside usage. Statement of Compliance Motorola hereby, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC and 2011/65/EU. A Declaration of Conformity may be obtained from http://

www.motorolasolutions.com/doc. Japan (VCCI) - Voluntary Control Council for Interference Class B ITE

Korea Warning Statement for Class B ITE

. Other Countries Australia Use of 5 GHz RLAN's in Australia is restricted in the following band 5.60 - 5.65GHz. Brazil Declaraes Regulamentares para MC32N0 - Brazil Nota: A marca de certificao se aplica ao Transceptor, modelo TC55AH. Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Para maiores informaes sobre ANATEL consulte o site:

www.anatel.gov.br. Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Este produto est homologado pela Anatel, de acordo com os procedimentos regulamentados pela Resoluo n242/2000 e atende aos requisitos tcnicos aplicados, incluindo os limites de exposio da Taxa de Absoro Especfica referente a campos eltricos, magnticos e eletromagnticos de radiofrequncia, de acordo com as Resolues n 303/2002 e 533/2009. Este dispositivo est em conformidade com as diretrizes de exposio radiofrequncia quando posicionado pelo menos 0 centmetros de distncia do corpo. Para maiores informaes, consulte o site da Anatel. Chile Este equipo cumple con la Resolucin No 403 de 2008, de la Subsecretaria de telecomunicaciones, relativa a radiaciones electromagnticas. China Mexico Restrict Frequency Range to: 2.450 - 2.4835 GHz. La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. South Korea

Taiwan

Turkey Bu cihaz Trke karakterlerin tamamn ihtiva eden ETSI TS 123.038 V8.0.0 (veya sonraki srmn kodu) ve ETSI TS 123.040 V8.1.0 (veya sonraki srmn kodu) teknik zelliklerine uygundur. Ukraine 1057, 2008

. Thailand

Waste Electrical and Electronic Equipment (WEEE)

.

TURKISH WEEE Statement of Compliance EEE Ynetmeliine Uygundur Software Support Motorola wants to ensure that customers have the latest release of entitled software at the time of product purchase. To confirm that your Motorola Solutions device shipped with the latest release of entitled software, visit:

www.motorolasolutions.com/support. Check for the latest software from Software Downloads > Product Line/Product >

Go. If your device does not have the latest entitled software release as of your product purchase date, please e-mail a request to Motorola at:

entitlementservices@motorolasolutions.com. You must include the following essential device information with your request:

Model number Serial number Proof of purchase Title of the software download you are requesting. If it is determined by Motorola Solutions that your device is entitled to the latest software release, you will receive an e-

mail containing a link directing you to a Motorola web site to download the appropriate software. Open Source Software Information For instructions on how to obtain a copy of any source code being made Open Source by Motorola Solutions related to software used in this Motorola Solutions Product you may send your request in writing to:

Motorola Solutions, Inc. Open Source Software Management 1301 E. Algonquin Road Schaumburg, IL 60196, U.S.A. In your request, please include the Motorola Solutions Product Name and Version, along with the Open Source Software specifics, such as the Open Source Software Name and Version. Note, the source code for the Open Source Software may be resident on the Motorola Solutions Product Installation Media, or on supplemental Motorola Solutions Product Media. Please reference and review the entire Motorola Solutions Open Source Software Legal Notices and End User License Agreement for the details on location and methods of obtaining the source code. Note, dependent on the license terms of the Open Source Software, source code may not be provided. Please reference and review the entire Motorola Solutions Open Source Software Legal Notices and End User License Agreement for identifying which Open Source Software Packages will have source code provided. To view additional information regarding licenses, acknowledgements and required copyright notices for open source packages used in this Motorola Solutions product, touch Settings > About phone > Legal information > Open source licenses. Motorola Solutions, Inc. End User License Agreement BY INSTALLING AND/OR USING THIS PRODUCT, YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT AND AGREE TO BE BOUND ITS TERMS. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, MOTOROLA SOLUTIONS IS NOT WILLING TO LICENSE THE PRODUCT TO YOU, AND YOU MUST NOT USE OR INSTALL THIS PRODUCT. Grant of License. Motorola Solutions grants you (Licensee or you) a personal, nonexclusive, nontransferable, nonassignable, no cost license to use the software and documentation (Product(s)) subject to the terms and conditions of this Agreement. You shall use the Products only for your internal business purposes, exclusively to support Motorola Solutions devices. Any use of the Products outside of the conditions set forth herein is strictly prohibited and will be deemed a breach of this Agreement resulting in immediate termination of your License. In the event of a breach of this Agreement, Motorola Solutions will be entitled to all available remedies at law or in equity (including immediate injunctive relief and repossession of all Products unless Licensee is a Federal agency of the United States Government). You shall not distribute, sublicense, rent, loan, lease, export, re-export, resell, ship or divert or cause to be exported, re-

exported, resold, shipped or diverted, directly or indirectly, the Products under this Agreement. You shall not, and shall not permit others to: (i) modify, translate, decompile, bootleg, reverse engineer, disassemble, or extract the inner workings of the Products, (ii) copy the look-and-feel or functionality of the Products; (iii) remove any proprietary notices, marks, labels, or logos from the Products; (iv) rent or transfer all or some of the Products to any other party without Motorola Solutions' prior written consent; or (v) utilize any computer software or hardware which is designed to defeat any copy protection device, should the Products be equipped with such a protection device. Title to all copies of Products will not pass to Licensee at any time and remains vested exclusively in Motorola Solutions. All intellectual property developed, originated, or prepared by Motorola Solutions in connection with the Products remain vested exclusively in Motorola Solutions, and this Agreement does not grant to Licensee any intellectual property rights. Portions of the Products are protected by United States patent and copyright laws, international treaty provisions, and other applicable laws. Therefore, you must treat the Products like any other copyrighted material (e.g., a book or musical recording) except that you may make one copy of the Product solely for back-up purposes. Unauthorized duplication of the Products constitutes copyright infringement, and in the United States is punishable in federal court by fine and imprisonment. Disclaimer. MOTOROLA SOLUTIONS MAKES, AND YOU RECEIVE, NO WARRANTIES OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR IN ANY COMMUNICATION WITH YOU. MOTOROLA SOLUTIONS SPECIFICALLY DISCLAIMS ANY WARRANTY INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILTY, NONINFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE. THE PRODUCTS ARE PROVIDED "AS IS."

MOTOROLA SOLUTIONS DOES NOT WARRANT THAT THE PRODUCTS WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THE PRODUCTS WILL BE UNINTERRUPTED OR ERROR FREE, OR THAT DEFECTS IN THE PRODUCTS WILL BE CORRECTED. MOTOROLA SOLUTIONS MAKES NO WARRANTY WITH RESPECT TO THE CORRECTNESS, ACCURACY, OR RELIABILITY OF THE PRODUCTS. Some jurisdictions do not allow the exclusion of implied warranties, so the above exclusion may not apply to you. Limitation of Liability. THE TOTAL LIABILITY OF MOTOROLA SOLUTIONS UNDER THIS AGREEMENT FOR DAMAGES SHALL NOT EXCEED THE FAIR MARKET VALUE OF THE PRODUCTS LICENSED UNDER THIS AGREEMENT. IN NO EVENT WILL MOTOROLA SOLUTIONS BE LIABLE IN ANY WAY FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES OF ANY NATURE, INCLUDING WITHOUT LIMITATION, LOST BUSINESS PROFITS, OR LIABILITY OR INJURY TO THIRD PERSONS, WHETHER FORESEEABLE OR NOT, REGARDLESS OF WHETHER MOTOROLA SOLUTIONS HAS BEEN ADVISED OF THE POSSIBLITY OF SUCH DAMAGES. Some jurisdictions do not permit limitations of liability for incidental or consequential damages, so the above exclusions may not apply to you. This Limitation of Liability provision survives the termination of this Agreement and applies notwithstanding any contrary provision in this Agreement. Licensee must bring any action under this Agreement within one (1) year after the cause of action arises. Maintenance. Unless provided for in a separate agreement, Motorola Solutions shall not be responsible for maintenance or field service of the Products. High Risk Activities. The Products are not fault-tolerant and are not designed, manufactured or intended for use or resale as on-line control software in hazardous environments requiring fail-safe performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, direct life support machines, or weapons systems, in which the failure of the Products could lead directly to death, personal injury, or severe physical or environmental damage ("High Risk Activities"). Motorola Solutions and its suppliers specifically disclaim any express or implied warranty of fitness for High Risk Activities, and if you elect to use the Products in any High Risk Activities, you agree to indemnify, defend, and hold Motorola Solutions harmless from and against any and all costs, damages, and losses related to that use. U.S. Government. If you are acquiring the Products on behalf of any unit or agency of the U.S. Government, the following shall apply. Use, duplication, or disclosure of the Products is subject to the restrictions set forth in subparagraphs (c) (1) and

(2) of the Commercial Computer Software - Restricted Rights clause at FAR 52.227-19 (JUNE 1987), if applicable, unless being provided to the Department of Defense. If being provided to the Department of Defense, use, duplication, or disclosure of the Products is subject to the restricted rights set forth in subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 (OCT 1988), if applicable. Products may or may not include a Restricted Rights notice, or other notice referring specifically to the terms and conditions of this Agreement. The terms and conditions of this Agreement shall each continue to apply, but only to the extent that such terms and conditions are not inconsistent with the rights provided to you under the aforementioned provisions of the FAR and DFARS, as applicable to the particular procuring agency and procurement transaction. Governing Law. This Agreement shall be governed by the laws of the United States of America to the extent that they apply and otherwise by the laws of the State of New York without regard to its conflict of laws provisions. Compliance with Laws. Licensee will comply with all applicable laws and regulations, including export laws and regulations of the United States. Licensee will not, without the prior authorization of Motorola Solutions and the appropriate governmental authority of the United States, in any form export or re-export, sell or resell, ship or reship, or divert, through direct or indirect means, any item or technical data or direct or indirect products sold or otherwise furnished to any person within any territory for which the United States Government or any of its agencies at the time of the action, requires an export license or other governmental approval. Violation of this provision will be a material breach of this Agreement, permitting immediate termination by Motorola Solutions. Third Party Software. The Products may contain one or more items of Third-Party Software. The terms of this Agreement govern your use of any Third-Party Software UNLESS A SEPARATE THIRD-PARTY SOFTWARE LICENSE IS INCLUDED, IN WHICH CASE YOUR USE OF THE THIRD-

PARTY SOFTWARE WILL THEN BE GOVERNED BY THE SEPARATE THIRD-PARTY LICENSE. Open Source Software. The Products may contain one or more items of Open Source Software. Open Source Software is software covered by a publicly available license governed solely under Copyright law, whereas the complete terms and obligations of such license attach to a licensee solely through the act of copying, using and/or distribution of the licensed software, such obligations often include one or more of attribution obligations, distribution obligations, copyleft obligations, and intellectual property encumbrances. The use of any Open Source Software is subject to the terms and conditions of this Agreement as well as the terms and conditions of the corresponding license of each Open Source Software package. If there is a conflict between the terms and conditions of this Agreement and the terms and conditions of the Open Source Software license, the applicable Open Source Software license will take precedence. Copies of the licenses for the included Open Source Software, if any, as well as their attributions, acknowledgements, and software information details, are provided in the electronic copy of this Agreement, which is available in the Legal Notices or README file associated with the Product. Motorola Solutions is required to reproduce the software licenses, acknowledgments and copyright notices as provided by the authors and owners, thus, all such information is provided in its native language form, without modification or translation. Depending on the license terms of the specific Open Source Software, source code may not be provided. Please reference and review the entire Open Source Software information to identify which Open Source Software packages have source code provided or available. For instructions on how to obtain a copy of any source code made publicly available by Motorola Solutions related to Open Source Software distributed by Motorola Solutions, you may send your request (including the Motorola Solutions Product name and version, along with the Open Source Software specifics) in writing to: Motorola Solutions, Inc., Open Source Software Management, 1301 E. Algonquin Road, Schaumburg, IL 60196 USA.

MC32N0 SERIES REGULATORY GUIDE Zebra reserves the right to make changes to any product to improve reliability, function, or design. Zebra does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, apparatus, machine, material, method, or process in which Zebra products might be used. An implied license exists only for equipment, circuits, and subsystems contained in Zebra products. Warranty For the complete Zebra hardware product warranty statement, go to:

http://www.zebra.com/warranty. Service Information If you have a problem using the equipment, contact your facilitys Technical or Systems Support. If there is a problem with the equipment, they will contact the Zebra Global Customer Support at: http://www.zebra.com/support. For the latest version of this guide go to: http://www.zebra.com/support. Zebra Technologies Corporation Lincolnshire, IL 60069, U.S.A. http://www.zebra.com Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. 2015 ZIH Corp and/or its affiliates. All rights reserved MN000216A04 Rev. A - April 2015 Regulatory Information This guide applies to Model Number MC32N0. All Zebra devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Local language translations are available at the following website: http://www.zebra.com/support. Any changes or modifications to Zebra equipment, not expressly approved by Zebra, could void the user's authority to operate the equipment. Antennas: Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could cause damage and may violate regulations. CAUTION Only use Zebra approved and UL Listed accessories, battery packs and battery chargers. Do NOT attempt to charge damp/wet mobile computers or batteries. All components must be dry before connecting to an external power source. Declared maximum operating temperature: 50C. Radio Modules The device contains approved radio module. The module is identified below. Zebra radio module supporting WLAN 802.11 a/b/g/n and Bluetooth. Type: 21-148603-0B. Bluetooth Wireless Technology This is an approved Bluetooth product. For more information or to view the End Product Listing, please visit http://

www.bluetooth.org/tpg/listings.cfm. Wireless Device Country Approvals Regulatory markings, subject to certification, are applied to the device signifying the radio(s) is/are approved for use in the following countries: United States, Canada, Japan, China, S. Korea, Australia, and Europe. Please refer to the Declaration of Conformity (DoC) for details of other country markings. This is available at http://www.zebra.com/doc. Note: Europe includes, Austria, Belgium, Bulgaria, Croatia, Czech Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Operation of the device without regulatory approval is illegal. Country Roaming This device incorporates the International Roaming feature

(IEEE802.11d) which will ensure the product operates on the correct channels for the particular country of use. Ad-Hoc Operation (2.4 GHz band) Ad-Hoc operation is limited to Channels 1 - 11 (2412 - 2462 MHz). Frequency of Operation - IC Industry Canada Statement:

Caution: The device for the band 5150 - 5250 MHz is only for indoor usage to reduce potential for harmful interference to co-

Channel mobile satellite systems. High power radars are allocated as primary users (meaning they have priority) of 5250 - 5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices. Avertissement: Le dispositive fonctionnant dans la bande 5150 - 5250 MHz est rserv uniquement pour une utilisation l'intrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. Les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., qu'ils ont la priorit) pour les bands 5250 - 5350 MHz et 5650 - 5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. Health and Safety Recommendations Ergonomic Recommendations CAUTION In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your local Health & Safety Manager to ensure that you are adhering to your companys safety programs to prevent employee injury. Improve work procedures. Reduce or eliminate repetitive motion Maintain a neutral posture Reduce or eliminate excessive force Keep objects that are used frequently within easy reach Perform tasks at correct heights Reduce or eliminate vibration Reduce or eliminate direct pressure Provide adjustable workstations Provide adequate clearance Provide a suitable working environment Safety on the Road Do not take notes or use the device while driving. Jotting down a to do list or flipping through your address book takes attention away from your primary responsibility, driving safely. When driving a car, driving is your first responsibility - Give full attention to driving. Check the laws and regulations on the use of wireless devices in the areas where you drive. Always obey them. When using a wireless device behind the wheel of a car, practice good common sense and remember the following tips:

1. Get to know your wireless device and any features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road. 2. When available, use a hands free device. 3. Let the person you are speaking with know you are driving;

if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be hazardous. 4. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue. 5. Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations that have the potential to divert your attention from the road. 6. Use your wireless phone to call for help. Dial the Emergency services, (9-1-1 in the US, and 1-1-2 in Europe) or other local emergency number in the case of fire, traffic accident or medical emergencies. Remember, it is a free call on your wireless phone! The call can be made regardless of any security codes and depending on a network, with or without a SIM card inserted. 7. Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call the Emergency Services, (9-1-1 in the US, and 1-1-2 in Europe) or other local emergency number, as you would want others to do for you. 8. Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number. The wireless industry reminds you to use your device / phone safely when driving. Warnings for Use of Wireless Devices Please observe all warning notices with regard to the usage of wireless devices. Potentially Hazardous Atmospheres - Vehicles Use You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants etc. and areas where the air contains chemicals or particles (such as grain, dust, or metal powders) and any other area where you would normally be advised to turn off your vehicle engine. Safety in Aircraft Switch off your wireless device whenever you are instructed to do so by airport or airline staff. If your device offers a 'flight mode' or similar feature, consult airline staff as to its use in flight. Safety in Hospitals Wireless devices transmit radio frequency energy and may affect medical electrical equipment. Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics or healthcare facilities. These requests are designed to prevent possible interference with sensitive medical equipment. Pacemakers Pacemaker manufacturers recommended that a minimum of 15 cm (6 inches) be maintained between a handheld wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with independent research and recommendations by Wireless Technology Research. Persons with pacemakers:

Should ALWAYS keep the device more than 15 cm (6 inches) from their pacemaker when turned ON. Should not carry the device in a breast pocket. Should use the ear furthest from the pacemaker to minimize the potential for interference. If you have any reason to suspect that interference is taking place, turn OFF your device. Other Medical Devices Please consult your physician or the manufacturer of the medical device, to determine if the operation of your wireless product may interfere with the medical device. RF Exposure Guidelines Safety Information Reducing RF Exposure - Use Properly Only operate the device in accordance with the instructions supplied. International The device complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices. For information on International human exposure to electromagnetic fields refer to the Zebra Declaration of Conformity (DoC) at http://www.zebra.com/doc. For further information on the safety of RF energy from wireless devices - see http://www.zebra.com/corporateresponsibility located under Wireless Communications and Health. Europe Handheld Devices This device was tested for typical body-worn operation. Use only Zebra tested and approved belt-clips, holsters, and similar accessories to ensure EU Compliance. US and Canada Co-located Statement To comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must not be co-located or operating in conjunction with any other transmitter/antenna except those already approved in this filing. Handheld Devices This device was tested for typical body-worn operation. Use only Zebra tested and approved belt-clips, holsters, and similar accessories to ensure FCC/IC Compliance. The use of third-

party belt-clips, holsters, and similar accessories may not comply with FCC/IC RF exposure compliance requirements, and should be avoided. Priphriques portables Cet appareil a t test dans le cadre d'une utilisation typique, c'est-dire plac contre le corps. N'utilisez que des clips de ceinture, des tuis et autres accessoires similaires qui ont t tests et approuvs par Zebra afin de respecter les critres de conformit de la FCC /IC. Les clips de ceinture, les tuis et les accessoires proposs par des socits tierces peuvent ne pas respecter les critres de conformit de la FCC/IC, ils doivent donc tre vits. Laser Devices Class 2 laser scanners use a low power, visible light diode. As with any very bright light source, such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful. The following statement is required to comply with US and international regulations. Caution: Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous laser light exposure. Scanner Labeling 1 2 1 2 1 3 3 2 1 3 Labels Read:

1. LASER LIGHT-DO NOT STARE INTO BEAM. CLASS 2 LASER PRODUCT 2. CAUTION-CLASS 2 LASER LIGHT WHEN OPEN. DO NOT STARE INTO THE BEAM 3. COMPLIES WITH 21 CFR1040.10 AND 1040.11 EXCEPT FOR DEVIATIONS PURSUANT TO LASER NOTICE NO. 50, DATED JUNE 24, 2007, AND IEC 60825-1 (Ed.2.0), EN60825-1:2007. LED Compliance Statement Classified as EXEMPT RISK GROUP according to IEC 62471:2006 and EN 62471:2008. Pulse duration for SE4750 is 1.7 ms. Pulse duration for SE4500 is 6.67 ms. Batteries Taiwan - Recycling EPA (Environmental Protection Administration) requires dry battery producing or importing firms in accordance with Article 15 of the Waste Disposal Act are required to indicate the recycling marks on the batteries used in sales, giveaway or promotion. Contact a qualified Taiwanese recycler for proper battery disposal. Battery Information CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of batteries according to instructions. Use only Zebra approved batteries. Accessories which have battery charging capability are approved for use with the following battery models:

82-000011-01 (3.7 VDC, 2740 mAh) 82-000012-01 (3.7 VDC, 4800 mAh) Zebra rechargeable battery packs are designed and constructed to the highest standards within the industry. However, there are limitations to how long a battery can operate or be stored before needing replacement. Many factors affect the actual life cycle of a battery pack, such as heat, cold, harsh environmental conditions and severe drops. When batteries are stored over six (6) months, some irreversible deterioration in overall battery quality may occur. Store batteries at half of full charge in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of metallic parts and electrolyte leakage. When storing batteries for one year or longer, the charge level should be verified at least once a year and charged to half of full charge. Replace the battery when a significant loss of run time is detected. Standard warranty period for all Zebra batteries is one year, regardless if the battery was purchased separately or included as part of the mobile computer. For more information on Zebra batteries, please visit: http://www.zebra.com/batterybasics Battery Safety Guidelines The area in which the units are charged should be clear of debris and combustible materials or chemicals. Particular care should be taken where the device is charged in a non commercial environment. Follow battery usage, storage, and charging guidelines found in the user's guide. Improper battery use may result in a fire, explosion, or other hazard. To charge the mobile device battery, the battery and charger temperatures must be between 0 C and +40 C

(+32 F and +104 F) Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present a risk of fire, explosion, leakage, or other hazard. If you have any questions about the compatibility of a battery or a charger, contact Zebra Global Customer Support. Do not disassemble or open, crush, bend or deform, puncture, or shred. Severe impact from dropping any battery-operated device on a hard surface could cause the battery to overheat. Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals. Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, or expose to fire, explosion, or other hazard. Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle or near a radiator or other heat source. Do not place battery into a microwave oven or dryer. Battery usage by children should be supervised. Please follow local regulations to promptly dispose of used re-chargeable batteries. Do not dispose of batteries in fire. Seek medical advice immediately if a battery has been swallowed. In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with large amounts of water and seek medical advice. If you suspect damage to your equipment or battery, contact Zebra Global Customer Support to arrange for inspection. Use with Hearing Aids When some wireless devices are used near some hearing devices (hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise, and wireless devices also vary in the amount of interference they generate. In the event of interference you may want to consult your hearing aid supplier to discuss solutions. Hearing Aid Compatibility This device does not support Voice Over IP (VOIP) calls. Radio Frequency Interference Requirements-

FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help. Radio Transmitters (Part 15) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radio Frequency Interference Requirements - Canada This Class B digital apparatus complies with Canadian ICES-

003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Radio Transmitters For RLAN Devices:

The use of 5 GHz RLAN's, for use in Canada, have the following restrictions:

Restricted Band 5.60 - 5.65 GHz This device complies with RSS 210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes:

(1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Label Marking: The Term IC: before the radio certification only signifies that Industry Canada technical specifications were met. Marking and European Economic Area

(EEA) The use of 2.4 GHz RLAN's, for use through the EEA, have the following restrictions:

Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 - 2.4835 GHz. Bluetooth Wireless Technology for use through the EEA has the following restrictions:

Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 - 2.4835 GHz. Statement of Compliance Zebra hereby, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC and 2011/65/EU. A Declaration of Conformity may be obtained from http://www.zebra.com/doc. Review Copy Open Source Software Packages will have source code provided. To view additional information regarding licenses, acknowledgements and required copyright notices for open source packages used in this Zebra product, touch Settings >

About phone > Legal information > Open source licenses. Japan (VCCI) - Voluntary Control Council for Interference Class B ITE B Korea Warning Statement for Class B ITE B

(

)

(B )

,

. Other Countries Australia Use of 5 GHz RLAN's in Australia is restricted in the following band 5.60 - 5.65GHz. Brazil Declaraes Regulamentares para MC32N0 - Brazil Nota: A marca de certificao se aplica ao Transceptor, modelo MC32N0. Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Para maiores informaes sobre ANATEL consulte o site:

www.anatel.gov.br. Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Este produto est homologado pela Anatel, de acordo com os procedimentos regulamentados pela Resoluo n242/2000 e atende aos requisitos tcnicos aplicados, incluindo os limites de exposio da Taxa de Absoro Especfica referente a campos eltricos, magnticos e eletromagnticos de radiofrequncia, de acordo com as Resolues n 303/2002 e 533/2009. Este dispositivo est em conformidade com as diretrizes de exposio radiofrequncia quando posicionado pelo menos 0 centmetros de distncia do corpo. Para maiores informaes, consulte o site da Anatel. Chile Este equipo cumple con la Resolucin No 403 de 2008, de la Subsecretaria de telecomunicaciones, relativa a radiaciones electromagnticas. China Hong Kong In accordance with HKTA1039, the band 5.15 GHz - 5.35 GHz is for indoor operation only. Mexico Restrict Frequency Range to: 2.450 - 2.4835 GHz. La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. South Korea

. Taiwan 5.25 - 5.35 Ukraine 1057, 2008

. Thailand

. Waste Electrical and Electronic Equipment (WEEE) English: For EU Customers: All products at the end of their life must be returned to Zebra for recycling. For information on how to return product, please go to:

http://www.zebra.com/weee Franais : Clients de l'Union Europenne : Tous les produits en fin de cycle de vie doivent tre retourns Zebra pour recyclage. Pour de plus amples informations sur le retour de produits, consultez : http://www.zebra.com/weee. Espaol: Para clientes en la Unin Europea: todos los productos debern entregarse a Zebra al final de su ciclo de vida para que sean reciclados. Si desea ms informacin sobre cmo devolver un producto, visite:

http://www.zebra.com/weee.

: :

Zebra

.

, :

http://www.zebra.com/weee. Deutsch: Fr Kunden innerhalb der EU: Alle Produkte mssen am Ende ihrer Lebensdauer zum Recycling an Zebra zurckgesandt werden. Informationen zur Rcksendung von Produkten finden Sie unter http://www.zebra.com/weee. Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono essere restituiti a Zebra al fine di consentirne il riciclaggio. Per informazioni sulle modalit di restituzione, visitare il seguente sito Web:

http://www.zebra.com/weee. Portugus: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos Zebra para reciclagem. Para obter informaes sobre como devolver o produto, visite:

http://www.zebra.com/weee. Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar Zebra te worden teruggezonden voor recycling. Raadpleeg http://www.zebra.com/weee voor meer informatie over het terugzenden van producten. Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji naley zwrci do firmy Zebra w celu ich utylizacji. Informacje na temat zwrotu produktw znajduj si na stronie internetowej http://www.zebra.com/weee. etina: Pro zkaznky z EU: Vechny produkty je nutn po skonen jejich ivotnosti vrtit spolenosti Zebra k recyklaci. Informace o zpsobu vrcen produktu najdete na webov strnce: http://www.zebra.com/weee. Eesti: EL klientidele: kik tooted tuleb nende eluea lppedes tagastada taaskasutamise eesmrgil Zebra'ile. Lisainformatsiooni saamiseks toote tagastamise kohta klastage palun aadressi: http://www.zebra.com/weee. Magyar: Az EU-ban vsrlknak: Minden tnkrement termket a Zebra vllalathoz kell eljuttatni jrahasznosts cljbl. A termk visszajuttatsnak mdjval kapcsolatos tudnivalkrt ltogasson el a http://www.zebra.com/weee weboldalra. Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku ivljenjske dobe vrniti podjetju Zebra za reciklao. Za informacije o vrailu izdelka obiite:

http://www.zebra.com/weee. Svenska: Fr kunder inom EU: Alla produkter som uppntt sin livslngd mste returneras till Zebra fr tervinning. Information om hur du returnerar produkten finns p http://www.zebra.com/weee. Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrtettvksi Zebra-yhtin, kun tuotetta ei en kytet. Listietoja tuotteen palauttamisesta on osoitteessa http://www.zebra.com/weee. Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til recirkulering, nr de er udtjent. Ls oplysningerne om returnering af produkter p: http://www.zebra.com/weee.

: ..: ,

, Zebra

.

, http://www.zebra.com/weee . Malti: Gal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aar tal-ajja ta' l-uu taghom, iridu jiu rritornati gand Zebra gar-riikla. Gal aktar tagrif dwar kif gandek tirritorna l-

prodott, jekk jogbok ur: http://www.zebra.com/weee. Slovenina: Pre zkaznkov z krajn EU: Vetky vrobky musia by po uplynut doby ich ivotnosti vrten spolonosti Zebra na recyklciu. Bliie informcie o vrten vrobkov njdete na:

http://www.zebra.com/weee. Lietuvi: ES vartotojams: visi gaminiai, pasibaigus j eksploatacijos laikui, turi bti grinti utilizuoti kompanij Zebra. Daugiau informacijos, kaip grinti gamin, rasite:

http://www.zebra.com/weee. Latvieu: ES klientiem: visi produkti pc to kalpoanas ma beigm ir jnogd atpaka Zebra otrreizjai prstrdei. Lai iegtu informciju par produktu nogdanu Zebra, ldzu, skatiet: http://www.zebra.com/weee. TURKISH WEEE Statement of Compliance EEE Ynetmeliine Uygundur Software Support Zebra wants to ensure that customers have the latest release of entitled software at the time of product purchase. To confirm that your Zebra device shipped with the latest release of entitled software, visit: www.zebra.com/support. Check for the latest software from Software Downloads >

Product Line/Product > Go. If your device does not have the latest entitled software release as of your product purchase date, please e-mail a request to Zebra at: entitlementservices@zebra.com. You must include the following essential device information with your request:

Model number Serial number Proof of purchase Title of the software download you are requesting. If it is determined by Zebra that your device is entitled to the latest software release, you will receive an e-mail containing a link directing you to a Zebra web site to download the appropriate software. Open Source Software Information For instructions on how to obtain a copy of any source code being made Open Source by Zebra related to software used in this Zebra Product you may send your request in writing to:

Zebra Technologies Corporation Open Source Software Management One Motorola Plaza Holtsville, NY 11742-1300, U.S.A. In your request, please include the Zebra Product Name and Version, along with the Open Source Software specifics, such as the Open Source Software Name and Version. Note, the source code for the Open Source Software may be resident on the Zebra Product Installation Media, or on supplemental Zebra Product Media. Please reference and review the entire Zebra Open Source Software Legal Notices and End User License Agreement for the details on location and methods of obtaining the source code. Note, dependent on the license terms of the Open Source Software, source code may not be provided. Please reference and review the entire Zebra Open Source Software Legal Notices and End User License Agreement for identifying which Zebra Technologies Corporation, Inc. End User License Agreement BY INSTALLING AND/OR USING THIS PRODUCT, YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT AND AGREE TO BE BOUND ITS TERMS. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, ZEBRA IS NOT WILLING TO LICENSE THE PRODUCT TO YOU, AND YOU MUST NOT USE OR INSTALL THIS PRODUCT. Grant of License. Zebra grants you (Licensee or you) a personal, nonexclusive, nontransferable, nonassignable, no cost license to use the software and documentation

(Product(s)) subject to the terms and conditions of this Agreement. You shall use the Products only for your internal business purposes, exclusively to support Zebra devices. Any use of the Products outside of the conditions set forth herein is strictly prohibited and will be deemed a breach of this Agreement resulting in immediate termination of your License. In the event of a breach of this Agreement, Zebra will be entitled to all available remedies at law or in equity (including immediate injunctive relief and repossession of all Products unless Licensee is a Federal agency of the United States Government). You shall not distribute, sublicense, rent, loan, lease, export, re-export, resell, ship or divert or cause to be exported, re-

exported, resold, shipped or diverted, directly or indirectly, the Products under this Agreement. You shall not, and shall not permit others to: (i) modify, translate, decompile, bootleg, reverse engineer, disassemble, or extract the inner workings of the Products, (ii) copy the look-and-feel or functionality of the Products; (iii) remove any proprietary notices, marks, labels, or logos from the Products; (iv) rent or transfer all or some of the Products to any other party without Zebras prior written consent; or (v) utilize any computer software or hardware which is designed to defeat any copy protection device, should the Products be equipped with such a protection device. Title to all copies of Products will not pass to Licensee at any time and remains vested exclusively in Zebra. All intellectual property developed, originated, or prepared by Zebra in connection with the Products remain vested exclusively in Zebra and this Agreement does not grant to Licensee any intellectual property rights. Portions of the Products are protected by United States patent and copyright laws, international treaty provisions, and other applicable laws. Therefore, you must treat the Products like any other copyrighted material (e.g., a book or musical recording) except that you may make one copy of the Product solely for back-up purposes. Unauthorized duplication of the Products constitutes copyright infringement, and in the United States is punishable in federal court by fine and imprisonment. Disclaimer. ZEBRA MAKES, AND YOU RECEIVE, NO WARRANTIES OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR IN ANY COMMUNICATION WITH YOU. ZEBRA SPECIFICALLY DISCLAIMS ANY WARRANTY INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILTY, NONINFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE. THE PRODUCTS ARE PROVIDED "AS IS." ZEBRA DOES NOT WARRANT THAT THE PRODUCTS WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THE PRODUCTS WILL BE UNINTERRUPTED OR ERROR FREE, OR THAT DEFECTS IN THE PRODUCTS WILL BE CORRECTED. ZEBRA MAKES NO WARRANTY WITH RESPECT TO THE CORRECTNESS, ACCURACY, OR RELIABILITY OF THE PRODUCTS. Some jurisdictions do not allow the exclusion of implied warranties, so the above exclusion may not apply to you. Limitation of Liability. THE TOTAL LIABILITY OF ZEBRA UNDER THIS AGREEMENT FOR DAMAGES SHALL NOT EXCEED THE FAIR MARKET VALUE OF THE PRODUCTS LICENSED UNDER THIS AGREEMENT. IN NO EVENT WILL ZEBRA BE LIABLE IN ANY WAY FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES OF ANY NATURE, INCLUDING WITHOUT LIMITATION, LOST BUSINESS PROFITS, OR LIABILITY OR INJURY TO THIRD PERSONS, WHETHER FORESEEABLE OR NOT, REGARDLESS OF WHETHER ZEBRA HAS BEEN ADVISED OF THE POSSIBLITY OF SUCH DAMAGES. Some jurisdictions do not permit limitations of liability for incidental or consequential damages, so the above exclusions may not apply to you. This Limitation of Liability provision survives the termination of this Agreement and applies notwithstanding any contrary provision in this Agreement. Licensee must bring any action under this Agreement within one (1) year after the cause of action arises. Maintenance. Unless provided for in a separate agreement, Zebra shall not be responsible for maintenance or field service of the Products. High Risk Activities. The Products are not fault-tolerant and are not designed, manufactured or intended for use or resale as on-line control software in hazardous environments requiring fail-safe performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, direct life support machines, or weapons systems, in which the failure of the Products could lead directly to death, personal injury, or severe physical or environmental damage ("High Risk Activities"). Zebra and its suppliers specifically disclaim any express or implied warranty of fitness for High Risk Activities, and if you elect to use the Products in any High Risk Activities, you agree to indemnify, defend, and hold Zebra harmless from and against any and all costs, damages, and losses related to that use. U.S. Government. If you are acquiring the Products on behalf of any unit or agency of the U.S. Government, the following shall apply. Use, duplication, or disclosure of the Products is subject to the restrictions set forth in subparagraphs (c) (1) and

(2) of the Commercial Computer Software - Restricted Rights clause at FAR 52.227-19 (JUNE 1987), if applicable, unless being provided to the Department of Defense. If being provided to the Department of Defense, use, duplication, or disclosure of the Products is subject to the restricted rights set forth in subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 (OCT 1988), if applicable. Products may or may not include a Restricted Rights notice, or other notice referring specifically to the terms and conditions of this Agreement. The terms and conditions of this Agreement shall each continue to apply, but only to the extent that such terms and conditions are not inconsistent with the rights provided to you under the aforementioned provisions of the FAR and DFARS, as applicable to the particular procuring agency and procurement transaction. Governing Law. This Agreement shall be governed by the laws of the United States of America to the extent that they apply and otherwise by the laws of the State of New York without regard to its conflict of laws provisions. Compliance with Laws. Licensee will comply with all applicable laws and regulations, including export laws and regulations of the United States. Licensee will not, without the prior authorization of Zebra and the appropriate governmental authority of the United States, in any form export or re-export, sell or resell, ship or reship, or divert, through direct or indirect means, any item or technical data or direct or indirect products sold or otherwise furnished to any person within any territory for which the United States Government or any of its agencies at the time of the action, requires an export license or other governmental approval. Violation of this provision will be a material breach of this Agreement, permitting immediate termination by Zebra. Third Party Software. The Products may contain one or more items of Third-Party Software. The terms of this Agreement govern your use of any Third-Party Software UNLESS A SEPARATE THIRD-PARTY SOFTWARE LICENSE IS INCLUDED, IN WHICH CASE YOUR USE OF THE THIRD-

PARTY SOFTWARE WILL THEN BE GOVERNED BY THE SEPARATE THIRD-PARTY LICENSE. Open Source Software. The Products may contain one or more items of Open Source Software. Open Source Software is software covered by a publicly available license governed solely under Copyright law, whereas the complete terms and obligations of such license attach to a licensee solely through the act of copying, using and/or distribution of the licensed software, such obligations often include one or more of attribution obligations, distribution obligations, copyleft obligations, and intellectual property encumbrances. The use of any Open Source Software is subject to the terms and conditions of this Agreement as well as the terms and conditions of the corresponding license of each Open Source Software package. If there is a conflict between the terms and conditions of this Agreement and the terms and conditions of the Open Source Software license, the applicable Open Source Software license will take precedence. Copies of the licenses for the included Open Source Software, if any, as well as their attributions, acknowledgments, and software information details, are provided in the electronic copy of this Agreement, which is available in the Legal Notices or README file associated with the Product. Zebra is required to reproduce the software licenses, acknowledgments and copyright notices as provided by the authors and owners, thus, all such information is provided in its native language form, without modification or translation. Depending on the license terms of the specific Open Source Software, source code may not be provided. Please reference and review the entire Open Source Software information to identify which Open Source Software packages have source code provided or available. For instructions on how to obtain a copy of any source code made publicly available by Zebra related to Open Source Software distributed by Zebra, you may send your request (including the Zebra Product name and version, along with the Open Source Software specifics) in writing to: Zebra Technologies Corporation, Open Source Software Management, One Motorola Plaza Holtsville, NY 11742-1300 USA. CMM Disclosure

(Parts)

(Hg)

(Pb)

(Cd) X O O X O O X O O O O O O O O

(Cr(VI)) O O O O O O O O O

(Metal Parts)

(Circuit Modules)

(Cables and Cable Assemblies)

(Plastic and Polymeric Parts)

(Optics and Optical Components)

(Batteries)

(PBB) O O O O O O

(PBDE) O O O O O O SJ/T 11364 O:

GB/T 26572 X:

GB/T 26572 (

This table was created to comply with China RoHS requirements. Review Copy

Model No.: MC32N0 Straight Report No.: 131028E08H Reference No.:151202E10 2 of 59 Report No.: 131028E08H Reference No.:151202E10 3 of 59 Report No.: 131028E08H Reference No.:151202E10 4 of 59 Report No.: 131028E08H Reference No.:151202E10 5 of 59 Report No.: 131028E08H Reference No.:151202E10 6 of 59 Report No.: 131028E08H Reference No.:151202E10 7 of 59 Report No.: 131028E08H Reference No.:151202E10 8 of 59 Report No.: 131028E08H Reference No.:151202E10 9 of 59 Report No.: 131028E08H Reference No.:151202E10 10 of 59 Report No.: 131028E08H Reference No.:151202E10 11 of 59 Report No.: 131028E08H Reference No.:151202E10 12 of 59 Report No.: 131028E08H Reference No.:151202E10 13 of 59 Report No.: 131028E08H Reference No.:151202E10 14 of 59 Report No.: 131028E08H Reference No.:151202E10 15 of 59 Rotate Report No.: 131028E08H Reference No.:151202E10 20 of 59 Report No.: 131028E08H Reference No.:151202E10 21 of 59 Report No.: 131028E08H Reference No.:151202E10 22 of 59 Report No.: 131028E08H Reference No.:151202E10 23 of 59 Report No.: 131028E08H Reference No.:151202E10 24 of 59 Report No.: 131028E08H Reference No.:151202E10 25 of 59 Report No.: 131028E08H Reference No.:151202E10 26 of 59 Report No.: 131028E08H Reference No.:151202E10 27 of 59 Report No.: 131028E08H Reference No.:151202E10 28 of 59 Report No.: 131028E08H Reference No.:151202E10 29 of 59 Report No.: 131028E08H Reference No.:151202E10 30 of 59 Report No.: 131028E08H Reference No.:151202E10 31 of 59 Report No.: 131028E08H Reference No.:151202E10 32 of 59 Report No.: 131028E08H Reference No.:151202E10 33 of 59 Report No.: 131028E08H Reference No.:151202E10 34 of 59 Gun Report No.: 131028E08H Reference No.:151202E10 39 of 59 Report No.: 131028E08H Reference No.:151202E10 40 of 59 Report No.: 131028E08H Reference No.:151202E10 41 of 59 Report No.: 131028E08H Reference No.:151202E10 42 of 59 Report No.: 131028E08H Reference No.:151202E10 43 of 59 Report No.: 131028E08H Reference No.:151202E10 44 of 59 Report No.: 131028E08H Reference No.:151202E10 45 of 59 Report No.: 131028E08H Reference No.:151202E10 46 of 59 Report No.: 131028E08H Reference No.:151202E10 47 of 59 Report No.: 131028E08H Reference No.:151202E10 48 of 59 Report No.: 131028E08H Reference No.:151202E10 49 of 59 Report No.: 131028E08H Reference No.:151202E10 50 of 59 Report No.: 131028E08H Reference No.:151202E10 51 of 59 Report No.: 131028E08H Reference No.:151202E10 52 of 59

CONSTRUCTION PHOTOS OF EUT Straight Report No.: 131028E08 Page 1 Report No.: 131028E08 Page 2 Report No.: 131028E08 Page 3 Report No.: 131028E08 Page 4 Report No.: 131028E08 Page 5 Report No.: 131028E08 Page 6 Report No.: 131028E08 Page 7 Report No.: 131028E08 Page 8 Report No.: 131028E08 Page 9 Report No.: 131028E08 Page 10 Report No.: 131028E08 Page 11 Report No.: 131028E08 Page 12 Report No.: 131028E08 Page 13 Report No.: 131028E08 Page 14 Rotate Report No.: 131028E08 Page 15 Report No.: 131028E08 Page 16 Report No.: 131028E08 Page 17 Report No.: 131028E08 Page 18 Report No.: 131028E08 Page 19 Report No.: 131028E08 Page 20 Report No.: 131028E08 Page 21 Report No.: 131028E08 Page 22 Report No.: 131028E08 Page 23 Report No.: 131028E08 Page 24 Report No.: 131028E08 Page 25 Report No.: 131028E08 Page 26 Report No.: 131028E08 Page 27 Report No.: 131028E08 Page 28 Report No.: 131028E08 Page 29 Gun Report No.: 131028E08 Page 30 Report No.: 131028E08 Page 31 Report No.: 131028E08 Page 32 Report No.: 131028E08 Page 33 Report No.: 131028E08 Page 34 Report No.: 131028E08 Page 35 Report No.: 131028E08 Page 36 Report No.: 131028E08 Page 37 Report No.: 131028E08 Page 38 Report No.: 131028E08 Page 39 Report No.: 131028E08 Page 40 Report No.: 131028E08 Page 41 Report No.: 131028E08 Page 42 Report No.: 131028E08 Page 43

CONSTRUCTION PHOTOS OF EUT Straight Report No.: 131028E08 Page 1 Straight (28 keys) Report No.: 131028E08 Page 2 Straight (38 keys) Report No.: 131028E08 Page 3 Straight (48 keys) Report No.: 131028E08 Page 4 Rotate Report No.: 131028E08 Page 5 Rotate (28 keys) Report No.: 131028E08 Page 6 Rotate (38 keys) Report No.: 131028E08 Page 7 Rotate (48 keys) Report No.: 131028E08 Page 8 Gun Report No.: 131028E08 Page 9 Gun (28 keys) Report No.: 131028E08 Page 10 Gun (38 keys) Report No.: 131028E08 Page 11 Gun (48 keys) Report No.: 131028E08 Page 12 Power adapter (P/N : PWRS-14000-249R) Report No.: 131028E08 Page 13 Report No.: 131028E08 Page 14 Report No.: 131028E08 Page 15 Report No.: 131028E08 Page 16

1 2 3 4 SI SH USI KS HINA CHINA SHC KS A B C 1.M 2.P 3.M D D 4. 5. No 7. E F A9 A8 A7 A6 A5 A4 A3 A2 NO USI R TITLE:

MODEL NO Unless otherwise tolerence specified 0.5 2 Universal Scientific Industrial Co.,Ltd. SOURCE ORGANIZATION ED/SHED/MDE MC32N0 Gun Main label MC32N0 GUN DESIGNER Qing APP BY Jeffl DATE 01/08'14 DATE 01/08'14 3 DWG NO SCALE:

1/1 USI P/N 59-465760-01 2B-045453 mm UNIT:

SHEET REV A3 1 4 Modify AU logo & UL number 01/08'14 11/01'13 Modify regulatory logo DATE DESCRIPTION 1 A B C D E F

1 2 3 4 SI SH USI KS HINA CHINA USHC KS A B C 1.M 2.P 3.M D D 4. 5. 7. E F A9 A8 A7 A6 A5 A4 A3 A2 NO USI R TITLE:

MODEL NO Unless otherwise tolerence specified 0.5 2 Universal Scientific Industrial Co.,Ltd. SOURCE ORGANIZATION ED/SHED/MDE MC32N0 ROT Main Label MC32N0 ROT DESIGNER Qing APP BY Jeffl DWG NO SCALE:

1/1 USI P/N 2B-045451 mm UNIT:

SHEET REV 59-465758-01 A3 1 4 DATE 01/08'14 DATE 01/08'14 3 Modify AU logo & UL number Modify regulatory logo DESCRIPTION 01/08'14 11/01'13 DATE 1 A B C D E F

1 2 3 4 NC. 742 A I KS INA KS A B C 1.M 2.P 3.M D D 4. 5. 7 E F A9 A8 A7 A6 A5 A4 A3 Modify AU logo & UL number A2 NO Modify regulatory logo DESCRIPTION 1 USI R TITLE:

MODEL NO 01/08'14 11/01'13 DATE Unless otherwise tolerence specified 0.5 2 Universal Scientific Industrial Co.,Ltd. SOURCE ORGANIZATION ED/SHED/MDE MC32N0 STR Main Label MC32N0 ROT DESIGNER Qing APP BY Jeffl DATE 01/08'14 DATE 01/08'14 3 DWG NO SCALE:

1/1 USI P/N 59-465759-01 2B-045452 mm UNIT:

SHEET REV A3 1 4 A B C D E F

MC32N0 Mobile Computer FCC ID: UZ7MC32N0

Regulatory Engineering Date: March 27, 2017 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attn: OET Dept. Subject: Authorizations, Confidentiality, C2PC Request Letter for FCC ID: UZ7MC32N0 To whom it may concern:

We, the undersigned, hereby authorize Amanda Wu of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Amanda Wu of BV CPS Taoyuan on our behalf shall have the same effect as acts of our own. If you have any questions or concerns, please send them to Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) directly. Should you have any questions or comments regarding this matter, please dont hesitate to contact me. This is to request a Class II permissive change for FCC ID: UZ7MC32N0 originally granted on 02/26/2014

(2412.0 2472.0) The major change filed under this application is to add new OS (Android Lollipop) and BT4.0. This Equipment is prepared for FCC Reassessment, The difference compared with original is adding new OS (Android Lollipop) and BT4.0, and the product hardware is identical. If you have any questions regarding the authorization, please dont hesitate to contact me. Respectfully,

-------------------------------

Larry Zhou Regulatory Engineer 631-627-7179 Larry.Zhou@zebra.com Zebra Technologies Corporation 1 Zebra Plaza

| Holts vil le, NY 11742 | 1. 631.738.2400 phone | 1.631. 627. 7179 fax | www. zebra.com

Regulatory Engineering Date: April 21, 2017 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attn: OET Dept. Subject: Authorizations, Confidentiality, C2PC Request Letter for FCC ID: UZ7MC32N0 To whom it may concern:

We, the undersigned, hereby authorize Amanda Wu of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Amanda Wu of BV CPS Taoyuan on our behalf shall have the same effect as acts of our own. If you have any questions or concerns, please send them to Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) directly. Should you have any questions or comments regarding this matter, please dont hesitate to contact me. This is to request a Class II permissive change for FCC ID: UZ7MC32N0 originally granted on 02/26/2014

(2412.0 2472.0) The major change filed under this application is to add new OS (Android Lollipop) and BT4.0

(RF Chip Model: WL1283). This Equipment is prepared for FCC Reassessment, The difference compared with original is adding new OS (Android Lollipop) and BT4.0 (RF Chip Model: WL1283), and the product hardware is identical. Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below:

Schematics Block Diagram Operational Description Software Operational Description RF Chip data sheet Zebra Technologies Corporation 1 Zebra Pl az a | Hol ts v ill e, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.z ebra.c om Regulatory Engineering The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. If you have any questions regarding the authorization, please dont hesitate to contact me. Respectfully,

-------------------------------

Larry Zhou Regulatory Specialist 631-627-7179 Larry.Zhou@zebra.com Zebra Technologies Corporation 1 Zebra Pl az a | Hol ts v ill e, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.z ebra.c om

Date: July 6, 2016 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: FCC ID: UZ7MC32N0 FCC Class II Permissive change Request Regulatory Engineering To the commission:

This is to request for a Class II permissive change for FCC ID: UZ7MC32N0 to update UNII new rules. The application for Certification of the above referenced FCC ID is filed under Part 15.407(b)(4)(ii) with no changes in total power or hardware changes. The DTS report number RF131028E08 R1 issued on Feb/13/2014 is applicable to this filing. The test results in this report show compliance with part 15.247(d) emission limits for all antenna configurations. Please find below a list of all approved antennas with gain of 10 dBi or less:

Type Model number Antenna Gain (dBi) Rot-Main Rot-Aux Str-Main PIFA Str-Aux Gun-Main Gun-Aux Rot Str 0.95(2.4G) 5.5(5G) 0.61(2.4G) 5.89(5G) 1.09(2.4G) 4.65(5G) 0.66(2.4G) 4.19(5G) 1.77(2.4G) 4.82(5G) 1.61(2.4G) 5.82(5G) 2.6 2.71 Zebra Technologies Corporation 1 Z e b r a P l a z a , | H o l t s v i l l e , NY 11742 | 1. 631. 738. 2400 phone | 1. 631. 627. 7179 f ax | www. zebra . c om Regulatory Engineering Gun 3.74 Users and installers are provided with antenna installation restrictions for compliance with FCC requirements. Confidentiality Request Pursuant to the provisions of Sections 0.457 and 0.459 of Commissions rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. Operational Description Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. If you have any questions regarding this matter, please contact me directly. AUTHORIZATION LETTER We, the undersigned, hereby authorize Jones Tsai in Sporton International Inc. to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Jones Tsai in Sporton International Inc. on our behalf shall have the same effect as acts of our own. If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Should you have any questions or comments regarding this matter, please dont hesitate to contact me. Respectfully, Mark S. Luksich DMTS, Regulatory Engineering 631-738-5134 Mark.Luksich@Zebra.com Zebra Technologies Corporation 1 Z e b r a P l a z a , | H o l t s v i l l e , NY 11742 | 1. 631. 738. 2400 phone | 1. 631. 627. 7179 f ax | www. zebra . c om

Regulatory Engineering May 4, 2015 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attn: OET Dept. Subject: Authorizations, Confidentiality, C2PC Request Letter FCC ID: UZ7MC32N0 with Model No. : MC32N0 To the commission:

We, the undersigned, hereby authorize Amanda Wu of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Amanda Wu of BV CPS Taoyuan on our behalf shall have the same effect as acts of our own. If you have any acknowledgement and response, please send it to Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) directly. Should you have any questions or comments regarding this matter, please dont hesitate to contact me. Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below:

Software Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Zebra Technologies Corporation O ne Z ebra P l aza, | Hol t s vi l l e, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.zebra.com This is a request for a Class II permissive change of FCC ID: UZ7MC32N0 originally granted on 02/26/2014 The major change field under this application is to update to new UNII Regulatory Engineering Regards, Mark S. Luksich DMTS, Regulatory Engineering 631-738-5134 Mark.Luksich@zebra.com Zebra Technologies Corporation O ne Z ebra P l aza, | Hol t s vi l l e, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.zebra.com

Regulatory Engineering May 4, 2015 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attn: OET Dept. Subject: Authorizations, Confidentiality, C2PC Request Letter FCC ID: UZ7MC32N0 with Model No. : MC32N0 To the commission:

We, the undersigned, hereby authorize Amanda Wu of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Amanda Wu of BV CPS Taoyuan on our behalf shall have the same effect as acts of our own. If you have any acknowledgement and response, please send it to Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) directly. Should you have any questions or comments regarding this matter, please dont hesitate to contact me. Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below:

Software Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Zebra Technologies Corporation O ne Z ebra P l aza, | Hol t s vi l l e, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.zebra.com This is a request for a Class II permissive change of FCC ID: UZ7MC32N0 originally granted on 02/26/2014 The major change field under this application is to update to new UNII Regulatory Engineering Regards, Mark S. Luksich DMTS, Regulatory Engineering 631-738-5134 Mark.Luksich@zebra.com Zebra Technologies Corporation O ne Z ebra P l aza, | Hol t s vi l l e, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.zebra.com

Regulatory Engineering 29 May 2015 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Authorization and C2PC for Grants with FCC ID: UZ7MC32N0 and FCC ID: UZ7MC92N0 To the commission:

To the commission:

We, the undersigned, hereby authorize Amanda Wu of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Amanda Wu of BV CPS Taoyuan on our behalf shall have the same effect as acts of our own. If you have any questions or concerns, please send them to Bureau Veritas Consumer Products Services

(H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) directly. Should you have any questions or comments regarding this matter, please dont hesitate to contact me. Class 2 Permissive Change FCC ID: UZ7MC32N0 FCC ID: UZ7MC92N0 Original certification for DTS 5745MHz-5825MHz band will be disabled by software and is not user changeable. We will use only the newly certified 5745MHz-5825MHz band under new U-NII rules. Respectfully, Mark S. Luksich DMTS, Regulatory Engineering 631-738-5134 Mark.Luksich@Zebra.com Zebra Technologies Corporation 1 Z e br a P l a z a | H ol t s vi l l e, NY 1 1 74 2 | 1. 63 1. 7 3 8. 2 40 0 ph o ne | 1. 6 31. 6 27. 71 79 f a x | www. ze b r a . c om

G MOTOROLA SOLUTIONS Date: 20 February 2014 Address: One Motorola Plaza Holtsville NY 11742-1300 USA Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia MD 21046 Subject: Attestations and Requests for FCC ID: UZ7MC32NO To the Commission:

Regulatory Engineering The transmitter power is fixed at the factory and in the firmware, End User to adjust or change the transmitter power beyond what is listed on the FCC Grant, this includes 2.4 GHz, channels 12 and 13. there are no controls that allow the to Section 0.459 of the Commission's Rules, and Section 552(b)(4) of the Freedom of Pursuant Information Act, Motorola Solutions hereby requests short term confidential treatment of information accompanying this Application for Equipment Authorization with FCC ID: UZ7MC32NO for Exhibits as outlined below:

1. Internal Photographs 2. External Photographs 3. Test Setup Photographs 4. User's Manual The above materials contain images, to the public prior to offering for sale. The public disclosure ofthese matters might be harmful Motorola Solutions and provide unjustified benefits to its competitors. trade secrets, and proprietary information not customarily released to Pursuant treatment of information accompanying this application as outlined below:

to Sections 0.457 and 0.459 of the Commission's Rules, the Applicant we request confidential EXHIBIT (1) Operational Description EXHIBIT (2) Block Diagram EXHIBIT (3) Schematic Diagrams The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure ofthese matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant accompanying documentation will not be made before the date of the Grant for this application. to Rule 0.457, disclosure of this Application and all Motorola Solutions, One Motorola Plaza, Inc. I Holtsville, NY 11742 I 1.631.738.2400 phone I 1.631.627.7179 fax I www.motorolasolutions.com

" MOTOROLA SOLUTIONS Regulatory Engineering We, the undersigned, attest that this device does not support access, by any party (End User or to set the frequency or disable DFS. There are no controls or selections in the Professional product firmware that can tum off / disable DFS. The client software and associated drivers will not initiate any transmission on DFS frequencies without initiation by a master. Installer), We, the undersigned, attest that this device does not support access, by any party (End User or Professional enabling or disabling channels to support Ad-Hoc operations. There are no controls or selections in the product firmware that can add or subtract support of these functions on additional channels. Installer) to make adjustments to which channels support active or passive scanning, Channel Plan Motorola Solutions, One Motorola Plaza, Inc. I Holtsville, NY 11742 I 1.631.738.2400 phone I 1.631.627.7179 fax I www.motorolasolutions.com o 116 118 120 124 126 128 132 134 136 140 149 151 153 151 159 161 165

----

----

5610 ---

---

5100 ---

5580 5590 5600 5620 5630 5640 5660 5680 5145 5155 5165 5185 5195 5805 5825 x x x x x x x MOTOROLA SOLUTIONS Regulatory Engineering

.>: -----

x > ------

x Disabled x

.>: .z=:

x

.z=:

x > ::=::==::====

> > ----

--------

> t>: 'z:=

> > ----

----- > .i->

.> > ----

> > ~

.> -: ----

x x x x x x x x x x x x If you have any questions regarding the authorization, please don't hesitate to contact me. Respectfully, Mark Luksich DMTS, Regulatory Engineering Mark.Luksich@motorolasolutions.com 631-738-5134 Motorola Solutions, One Motorola Plaza, Inc. I Holtsville, NY 11742 I 1.631.738.2400 phone I 1.631.627.7179 fax I www.motorolasolutions.com

Regulatory Engineering Date: 6 February 2014 Address: One Motorola Plaza Holtsville NY 11742-1300 USA Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia MD 21046 Subject: FCC - Agent Authorization Letter To the Commission:

We, the undersigned, hereby authorize Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf, as our agent, in the following matters related to the FCC approval of the MC32N0 under FCC ID: UZ7MC32N0: report submittal, related correspondence, the signing of all documents relating to these matters, and any other lawful activity necessary to obtain such certification. Any act carried out by BV CPS Taoyua within the scope of this authorization shall have the same effects as our own. If you have any questions regarding the authorization, please dont hesitate to contact me. Respectfully, Mark S. Luksich DMTS, Regulatory Engineering 631-738-5134 Mark.Luksich@motorolasolutions.com Motorola Solutions, Inc. One Motorola Plaza, | Holtsville, NY 11742 | 1.631.738.2400 phone | 1.631.627.7179 fax | www.motorola solutions.com