all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
User Manual | Users Manual | 5.37 MiB | / December 05 2016 | |||
1 2 3 |
|
Users Manual Regulatory | Users Manual | 1.71 MiB | / December 05 2016 | |||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | External Photos | August 12 2015 / December 05 2016 | ||||||
1 2 3 | Internal Photos | / December 05 2016 | ||||||
1 2 3 | ID Label/Location Info | |||||||
1 2 3 | ID Label/Location Info | |||||||
1 2 3 | RF Exposure Info | August 12 2015 | ||||||
1 2 3 | RF Exposure Info | August 12 2015 | ||||||
1 2 3 | RF Exposure Info | August 12 2015 | ||||||
1 2 3 | RF Exposure Info | August 12 2015 | ||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Setup Photos | / December 05 2016 | ||||||
1 2 3 | Test Setup Photos | August 12 2015 / December 05 2016 | ||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Setup Photos | / December 05 2016 | ||||||
1 2 3 | Test Setup Photos | / December 05 2016 | ||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Setup Photos | / December 05 2016 | ||||||
1 2 3 | Test Setup Photos | / December 05 2016 | ||||||
1 2 3 | Test Setup Photos | / December 05 2016 |
1 2 3 | User Manual | Users Manual | 5.37 MiB | / December 05 2016 |
TC8000 Touch Computer User Guide MN002410A01 Review Copy Review Copy TC8000 User Guide MN002410A01 Rev. A October 2015 Review Copy ii TC8000 User Guide No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice. The software is provided strictly on an as is basis. All software, including firmware, furnished to the user is on a licensed basis. We grant to the user a non-transferable and non-exclusive license to use each software or firmware program delivered hereunder (licensed program). Except as noted below, such license may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent. No right to copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with other program material, create a derivative work from a licensed program, or use a licensed program in a network without written permission. The user agrees to maintain copyright notice on the licensed programs delivered hereunder, and to include the same on any authorized copies it makes, in whole or in part. The user agrees not to decompile, disassemble, decode, or reverse engineer any licensed program delivered to the user or any portion thereof. We reserve the right to make changes to any software or product to improve reliability, function, or design. We do not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any of our intellectual property rights. An implied license only exists for equipment, circuits, and subsystems contained in our products. Zebra Technologies Corporation 3 Overlook Point Lincolnshire, IL 60069 U.S.A. http://www.zebra.com Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. 2015 Symbol Technologies LLC. All rights reserved. Review Copy Revision History Changes to the original manual are listed below:
Change 01 Rev. A Date Initial release. Description iii Review Copy iv TC8000 User Guide Review Copy TABLE OF CONTENTS Revision History ................................................................................................................................. iii About This Guide Introduction ....................................................................................................................................... xi Documentation Set ........................................................................................................................... xi Configurations................................................................................................................................... xi Software Versions....................................................................................................................... xii Chapter Descriptions ........................................................................................................................ xii Notational Conventions..................................................................................................................... xii Related Documents and Software ................................................................................................... xiii Service Information .......................................................................................................................... xiii Chapter 1: Getting Started Introduction .................................................................................................................................... 1-1 Unpacking ................................................................................................................................ 1-1 Removing the Screen Protection Film ...................................................................................... 1-1 Setup .............................................................................................................................................. 1-4 Installing the Battery ................................................................................................................. 1-4 Charging the Battery ................................................................................................................ 1-5 Starting the TC8000 ................................................................................................................. 1-6 Installing the Hand Strap ................................................................................................................ 1-7 Replacing the Battery ..................................................................................................................... 1-9 Battery Management .................................................................................................................... 1-10 Monitor Battery Usage ........................................................................................................... 1-10 Low Battery Notification ......................................................................................................... 1-11 Battery Optimization ............................................................................................................... 1-11 Turning Off the Radios ........................................................................................................... 1-12 Setting the Date and Time ........................................................................................................... 1-12 Display Setting ............................................................................................................................. 1-12 Setting the Screen Brightness ................................................................................................ 1-13 Setting Screen Timeout Setting ............................................................................................. 1-13 Setting Font Size .................................................................................................................... 1-13 Review Copy vi TC8000 User Guide General Sound Setting ................................................................................................................. 1-14 Wake-Up Sources ........................................................................................................................ 1-15 Chapter 2: Using the TC8000 Introduction .................................................................................................................................... 2-1 Home Screen ................................................................................................................................. 2-1 Status Bar ................................................................................................................................ 2-2 Status Icons ....................................................................................................................... 2-2 Notification Icons ...................................................................................................................... 2-3 Managing Notifications ............................................................................................................. 2-4 Application Shortcuts and Widgets .......................................................................................... 2-5 Adding an Application or Widget to the Home Screen ....................................................... 2-5 Moving Items on the Home Screen .................................................................................... 2-5 Removing an App or Widget from the Home Screen ......................................................... 2-5 Folders ..................................................................................................................................... 2-5 Creating a Folder ............................................................................................................... 2-5 Naming Folders .................................................................................................................. 2-5 Removing a Folder ............................................................................................................. 2-6 Home Screen Wallpaper .......................................................................................................... 2-6 Changing the Home Screen Wallpaper .............................................................................. 2-6 Using the Touchscreen ............................................................................................................ 2-6 Using the On-screen Keyboard ................................................................................................ 2-7 Editing Text .............................................................................................................................. 2-7 Entering Numbers, Symbols and Special Characters .............................................................. 2-7 Applications .................................................................................................................................... 2-8 Accessing Applications .................................................................................................... 2-10 Switching Between Recent Applications .......................................................................... 2-10 Un-Locking the Screen ........................................................................................................... 2-11 Single User Mode ............................................................................................................. 2-11 MultiUser Mode ...................................................................................................................... 2-13 MultiUser Login ...................................................................................................................... 2-13 MultiUser Logout .............................................................................................................. 2-13 Suspend Mode ............................................................................................................................. 2-14 Performing a Soft Reset ......................................................................................................... 2-15 Performing a Hard Reset ....................................................................................................... 2-15 Chapter 3: Data Capture Introduction .................................................................................................................................... 3-1 Status LED ..................................................................................................................................... 3-1 Laser Scanning .............................................................................................................................. 3-2 Imaging .......................................................................................................................................... 3-2 Operational Modes ................................................................................................................... 3-2 Digital Camera ............................................................................................................................... 3-2 Scanning Considerations ............................................................................................................... 3-3 Bar Code Capture with Laser Scanner .......................................................................................... 3-3 Bar Code Capture with Imager ...................................................................................................... 3-4 Bar Code Capture with Camera ..................................................................................................... 3-6 Bar Code Capture with RS507 Hands-Free Imager ...................................................................... 3-7 Review Copy Table of Contents vii Pairing the RS507 Hands-Free Imager Using SSI ......................................................................... 3-8 Pairing the RS507 Hands-Free Imager Using Bluetooth HID ........................................................ 3-9 Hands Free Scanning .................................................................................................................. 3-10 Scanning Mode ...................................................................................................................... 3-10 Proximity Range ..................................................................................................................... 3-11 Proper Scanning .................................................................................................................... 3-12 Improper Scanning ................................................................................................................. 3-13 Enable DataWedge ................................................................................................................ 3-14 Disable DataWedge ............................................................................................................... 3-14 Chapter 4: Wireless Wireless Local Area Networks ....................................................................................................... 4-1 Scan and Connect to a Wi-Fi Network ..................................................................................... 4-2 Configuring a Wi-Fi Network .................................................................................................... 4-3 Manually Adding a Wi-Fi Network ............................................................................................ 4-4 Configuring for a Proxy Server ................................................................................................. 4-5 Configuring the Device to Use a Static IP Address .................................................................. 4-6 Advanced Wi-Fi Settings .......................................................................................................... 4-6 Remove a Wi-Fi Network ......................................................................................................... 4-8 Wi-Fi Advanced Features .............................................................................................................. 4-8 Zebra Mobility Extensions .............................................................................................................. 4-9 Bluetooth ...................................................................................................................................... 4-10 Adaptive Frequency Hopping ................................................................................................. 4-10 Security .................................................................................................................................. 4-10 Bluetooth Profiles ................................................................................................................... 4-11 Bluetooth Power States .......................................................................................................... 4-11 Bluetooth Radio Power .......................................................................................................... 4-11 Enabling Bluetooth ........................................................................................................... 4-11 Disabling Bluetooth .......................................................................................................... 4-12 Discovering Bluetooth Device(s) ............................................................................................ 4-12 Changing the Bluetooth Name ............................................................................................... 4-13 Connecting to a Bluetooth Device .......................................................................................... 4-13 Selecting Profiles on the Bluetooth Device ............................................................................ 4-13 Unpairing a Bluetooth Device ................................................................................................. 4-13 Near Field Communications ......................................................................................................... 4-14 Reading NFC Cards ............................................................................................................... 4-14 Sharing Information Using NFC ............................................................................................. 4-15 Enterprise NFC Settings ........................................................................................................ 4-15 Reader Mode ......................................................................................................................... 4-17 Chapter 5: Applications Introduction .................................................................................................................................... 5-1 File Browser ................................................................................................................................... 5-1 Adding People .......................................................................................................................... 5-3 Editing People .......................................................................................................................... 5-3 Deleting People ........................................................................................................................ 5-3 Taking Photos .......................................................................................................................... 5-4 Taking a Panoramic Photo ....................................................................................................... 5-6 Review Copy viii TC8000 User Guide Recording Videos ..................................................................................................................... 5-7 Photo Settings .......................................................................................................................... 5-9 Video Settings ........................................................................................................................ 5-11 Working with Albums .............................................................................................................. 5-12 Share an Album ..................................................................................................................... 5-13 Get Album Information ........................................................................................................... 5-13 Deleting an Album ............................................................................................................ 5-13 Working with Photos ........................................................................................................ 5-14 Viewing and Browsing Photos .......................................................................................... 5-14 Cropping a Photo ............................................................................................................. 5-14 Setting a Photo as a Contact Icon .................................................................................... 5-15 Share a Photo .................................................................................................................. 5-15 Deleting a Photo ............................................................................................................... 5-16 Working with Videos ............................................................................................................... 5-16 Watching Videos .............................................................................................................. 5-16 Sharing a Video ................................................................................................................ 5-16 Deleting a Video ............................................................................................................... 5-17 RxLogger Configuration ......................................................................................................... 5-20 Configuration File ............................................................................................................. 5-20 Enabling Logging ................................................................................................................... 5-20 Disabling Logging ................................................................................................................... 5-20 Extracting Log Files ................................................................................................................ 5-21 Disabling Elemez Data Collection .......................................................................................... 5-22 Enabling Elemez Data Collection ........................................................................................... 5-23 Chapter 6: Accessories Accessories .................................................................................................................................... 6-1 Battery Charging ...................................................................................................................... 6-4 Main Battery Charging ....................................................................................................... 6-4 Spare Battery Charging ...................................................................................................... 6-4 Charging Temperature ............................................................................................................. 6-5 Charging the TC8000 ............................................................................................................... 6-6 Battery Charging ...................................................................................................................... 6-7 Main Battery Charging ....................................................................................................... 6-7 Battery Charging ...................................................................................................................... 6-9 Main Battery Charging ....................................................................................................... 6-9 Spare Battery Charging ............................................................................................................ 6-9 Charging Temperature ............................................................................................................. 6-9 Charging the TC8000 ............................................................................................................. 6-10 Battery Charging .................................................................................................................... 6-11 Main Battery Charging ..................................................................................................... 6-11 Charging Temperature ........................................................................................................... 6-11 Establishing Ethernet Communication ................................................................................... 6-11 Ethernet LED Indicators ................................................................................................... 6-11 Charging the TC8000 ............................................................................................................. 6-12 Battery Charging .................................................................................................................... 6-13 Main Battery Charging ..................................................................................................... 6-13 Spare Battery Charging .................................................................................................... 6-13 Charging Temperature ........................................................................................................... 6-13 Review Copy Table of Contents ix Establishing Ethernet Communication ................................................................................... 6-13 Ethernet LED Indicators ................................................................................................... 6-14 Battery Installation .................................................................................................................. 6-15 Battery Removal ..................................................................................................................... 6-16 Battery Charging .................................................................................................................... 6-16 Spare Battery Charging .................................................................................................... 6-16 Charging Temperature ........................................................................................................... 6-16 Attaching the USB and Charging Cable ................................................................................. 6-18 USB Communication .............................................................................................................. 6-18 Removing the USB and Charging Cable ................................................................................ 6-19 Battery Charging .................................................................................................................... 6-19 Main Battery Charging ..................................................................................................... 6-19 Attaching the Audio Adapter .................................................................................................. 6-21 Connecting the Adapter to a Headset .................................................................................... 6-21 Removing the Audio Adapter ................................................................................................. 6-21 Attaching the Audio Adapter .................................................................................................. 6-23 Removing the Audio Adapter ................................................................................................. 6-23 Chapter 7: Maintenance and Troubleshooting Introduction .................................................................................................................................... 7-1 Maintaining the TC8000 ................................................................................................................. 7-1 Battery Safety Guidelines .............................................................................................................. 7-1 Long Term Storage ........................................................................................................................ 7-2 Cleaning ......................................................................................................................................... 7-2 Materials Required ................................................................................................................... 7-2 Cleaning the TC8000 ............................................................................................................... 7-3 Housing .............................................................................................................................. 7-3 Display ............................................................................................................................... 7-3 Scan Exit Window .............................................................................................................. 7-3 Power Connector ............................................................................................................... 7-3 Cleaning Cradle Connectors .................................................................................................... 7-3 Cleaning Frequency ................................................................................................................. 7-4 TC8000 .................................................................................................................................... 7-5 Cradles ..................................................................................................................................... 7-7 Appendix A: Specifications Technical Specifications ............................................................................................................... A-1 Index Review Copy x TC8000 User Guide Review Copy ABOUT THIS GUIDE Introduction This guide provides information about setting up and configuring TC8000 mobile computers with Android operating system and installing its accessories. NOTE Some screens or windows shown in this guide may differ from the actual screens shown on the TC8000. Documentation Set The documentation set for the TC8000 is divided into guides that provide information for specific user needs. TC8000 documentation includes:
TC8000 Quick Reference Guide - describes basic set up and operation of the TC8000 and its cradles. The guide also includes regulatory and safety information. TC8000 User Guide (this guide) - describes how to set up, operate and program the TC8000 with Android operating system and its accessories. TC8000 Integrator Guide - describes how to setup and configure TC8000 and accessories. Configurations This guide covers the following configurations:
Configuration Radios Display Memory TC80N0 TC80NH WLAN: 802.11 a/b/g/n WPAN: Bluetooth v4.0 WVGA 4.0 color 1 GB RAM/8 GB Flash WLAN: 802.11 a/b/g/n WPAN: Bluetooth v4.0 NFC WVGA 4.0 color 1 GB RAM/8 GB Flash Data Capture Options SE4750-SR imager SE4850 long range imager SE4750-SR imager SE4850 long range imager Operating System Android Open Source Project
(AOSP) 4.4.3. Android Open Source Project
(AOSP) 4.4.3. Review Copy xii TC8000 User Guide Software Versions
> About device. To determine the current software versions touch Serial number - Displays the serial number. Model number- Displays the model number. Android version - Displays the operating system version. Kernel version - Displays the kernel version number. Build number - Displays the software build number. Chapter Descriptions Topics covered in this guide are as follows:
Chapter 1, Getting Started, describes the features and basic operation of the TC8000, lists the accessories for the TC8000 and explains how to install and charge the batteries and start the TC8000 for the first time. Chapter 2, Using the TC8000, provides instructions for connecting the TC8000 to a host computer and using the OS desktop of the TC8000. Chapter 3, Data Capture, provides information for capturing bar code data. Chapter 4, Wireless, provides information on the various wireless options. Chapter 5, Applications, provides information on various applications pre-installed on the TC8000. Chapter 6, Accessories, Accessories, provides information for using the accessories with the TC8000. Chapter 7, Maintenance and Troubleshooting, includes instructions on cleaning and storing the TC8000, and provides troubleshooting solutions for potential problems during TC8000 operation. Appendix A, Specifications, includes a table listing the technical specifications for the TC8000 and accessories. Notational Conventions The following conventions are used in this document:
Italics are used to highlight the following:
Chapters and sections in this guide Related documents Bold text is used to highlight the following:
Dialog box, window and screen names Drop-down list and list box names Check box and radio button names Key names on a keypad Button names on a screen Icons on a screen Review Copy About This Guide xiii Bullets () indicate:
Action items Lists of alternatives Lists of required steps that are not necessarily sequential Sequential lists (e.g., those that describe step-by-step procedures) appear as numbered lists. NOTE This symbol indicates something of special interest or importance to the reader. Failure to read the note will not result in physical harm to the reader, equipment or data. CAUTION This symbol indicates that if this information is ignored, the possibility of data or material damage may occur. WARNING! This symbol indicates that if this information is ignored the possibility that serious personal injury may occur. Related Documents and Software The following documents provide more information about the TC8000 touch computers. TC8000 Regulatory Guide, p/n MN002270Axx TC8000 Integrator Guide, p/n MN002411Axx For the latest version of this guide and all guides, go to: http://www.zebra.com/support Service Information If you have a problem with your equipment, contact Customer Support for your region. Contact information is available at: http://www.zebra.com/support. When contacting Customer Support, please have the following information available:
Serial number of the unit Model number or product name Software type and version number. We respond to calls by E-mail, or telephone within the time limits set forth in support agreements. If your problem cannot be solved by Zebra Support, you may need to return your equipment for servicing and will be given specific directions. Zebra is not responsible for any damages incurred during shipment if the approved shipping container is not used. Shipping the units improperly can possibly void the warranty. If you purchased your business product from a business partner, contact that business partner for support. Review Copy xiv TC8000 User Guide Review Copy CHAPTER 1 GETTING STARTED Introduction This chapter describes the features of the TC8000 and explains how to install and charge the battery and how to reset the TC8000. Unpacking Carefully remove all protective material from the TC8000 and save the shipping container for later storage and shipping. Verify that box contains all the equipment listed below:
TC8000 Battery Regulatory Guide. Inspect the equipment for damage. If you are missing any equipment or if you find any damaged equipment, contact Support immediately. See Service Information on page xiii for contact information. Removing the Screen Protection Film A screen protection film is applied to the TC8000 screen to protect the screen during shipping. To remove the screen protector, carefully lift the thin film off the display. Review Copy 1 - 2 TC8000 User Guide Features 9 1 2 8 7 3 4 5 6 Figure 1-1 Front View Table 1-1 Front View Descriptions Number Item Function 1 2 3 4 5 6 Charging/Scan LED Indicates battery charging status while charging, good decode indication during data capture and application generated notifications. Power Button Blue Indication LED User programmable LED. Display Displays all information needed to operate the TC8000. Touch Button Press to select items or Hand Strap Mounting Point Review Copy Getting Started 1 - 3 Table 1-1 Front View Descriptions (Continued) Number Item Function 7 8 9 Speakers Provides audio output for video and music playback. Ambient Light Sensor Microphone Use for communication in handset mode. 11 12 13 1 2 3 4 5 6 10 9 8 7 Figure 1-2 Back View Table 1-2 Back View Descriptions Number Item Function 1 2 3 Rear Microphone Use during video recording and noise cancellation. Camera Flash Provides illumination for the camera. Camera Takes photos and videos. Review Copy 1 - 4 TC8000 User Guide Table 1-2 Back View Descriptions (Continued) Number Item Function 4 5 6 7 8 9 10 11 12 13 Scanner Trigger Push -To-Talk (PTT) Button Provides data capture using the imager or laser scanner. Initiates data capture. Battery Pack Provides power to the device. Hand Strap Mounting Point Speaker Proximity Sensor Long range proximity sensor (optional). Volume Up Button Decreases audio volume. I/O Connector Volume Up Button Increases audio volume. Setup Perform these procedures to start using the TC8000 for the first time. Install the battery. 1. 2. Charge the TC8000. 3. Power on the TC8000. Installing the Battery To install the battery:
1. Slide the battery into the handle of the device. Review Copy Getting Started 1 - 5 Figure 1-3 Battery Installation 2. Snap battery into place. Charging the Battery Before using the TC8000 for the first time, charge the battery using a cable or a cradle with the appropriate power supply. For information about the accessories available for the TC8000, see Chapter 6, Accessories. 4-Slot Battery Charger 2-Slot USB Charge Cradle 5-Slot Charge Only Cradle 5-Slot Ethernet Cradle 5-Slot Charge Only Cradle with 4-Slot Battery Charger 5-Slot Charge Only Cradle with 4-Slot Battery Charger. The 6,400 mAh battery fully charges in approximately six hours at room temperature. Charge batteries in temperatures from 0 C to 40 C (32 F to 104 F). The TC8000 or accessory always performs battery charging in a safe and intelligent manner. At higher temperatures (e.g. approximately +37 C (+98 F)) the TC8000 or accessory may for small periods of time alternately enable and disable battery charging to keep the battery at acceptable temperatures. The TC8000 or accessory indicates when charging is disabled due to abnormal temperatures via its LED. 1. To charge the main battery, connect the charging accessory to the appropriate power source. 2. Insert the TC8000 into a cradle or attach to a cable. The TC8000 turns on and begins charging. The Charging/Scan LED blinks amber while charging, then turns solid green when fully charged. Review Copy 1 - 6 TC8000 User Guide Table 1-3 Charging/Scan LED Charging Indicators State Off Solid Amber Solid Green Fast Blinking Red
(2 blinks/second) Indication TC8000 is not charging. TC8000 is not inserted correctly in the cradle or connected to a power source. Charger/cradle is not powered. TC8000 is charging. Charge complete. Charging error, e.g.:
- Temperature is too low or too high.
- Charging has gone on too long without completion (typically eight hours). Solid Red Battery hot swap mode. IMPORTANT When trying to power on the device, a quick blink of the charging LED indicates that it does not have enough battery power to turn on. You will need to charge the battery or replace it. Starting the TC8000 The TC8000 starts automatically as soon as power is applied; either with a charged battery installed or when inserted into a cradle. If charged battery is installed and the TC8000 is turned off, press the Power button to turn on. When the TC8000 is powered on for the first time, it initializes its system. The splash screen appears for a short period of time. NEED DRAWING Figure 1-4 Splash Screen The splash screen is followed by the boot animation screen and then the Home Screen. Review Copy Getting Started 1 - 7 Figure 1-5 Home Screen Installing the Hand Strap To install the hand strap:
NOTE Installation of the hand strap is optional. Skip this section if not installing the hand strap. 1. Remove battery if installed. 2. Thread the lanyard loop through the opening near the base of the handle. Figure 1-6 Insert Loop through Handle Slot 3. Insert the top end of the hand strap through the loop. Review Copy 1 - 8 TC8000 User Guide Figure 1-7 Thread Hand Strap Through Loop 4. Thread the hand-strap through the lanyard. 5. Pull the hand strap through the loop. 6. Thread the lanyard through the slot on the left or right side of the unit, depending on your preference. Figure 1-8 Tread Tab Through Side Slot 7. Slide the tab onto the clip. Review Copy Getting Started 1 - 9 Figure 1-9 Slide Tab onto Clip Replacing the Battery To remove the battery:
1. Press the two battery release latches in. Figure 1-10 Battery Removal 2. Pull the battery out of the device. Review Copy 1 - 10 TC8000 User Guide Figure 1-11 Battery Removal 3. Slide the replacement battery into the handle. Figure 1-12 Battery Installation 4. Press the battery into the handle until it snaps into place. Battery Management To check the charge status of the main battery, on the Home screen touch Battery status indicates that the battery is discharging (not charging) and Battery level lists the battery charge (as a percentage of fully charged). About device > Status.
>
Monitor Battery Usage The Battery screen lists which applications consume the most battery power. Also use it to turn off applications that were downloaded if they are consuming too much power. Touch
> Battery. Review Copy Getting Started 1 - 11 Figure 1-13 Battery Screen The Battery screen lists the applications using the battery. The discharge graph at the top of the screen shows the rate of the battery discharge since last charged (short periods of time when connected to a charger are shown as thin green lines at the bottom of the chart), and how long it has been running on battery power. Touch an application in the Battery screen to display details about its power consumption. Different applications display different information. Some applications include buttons that open screens with settings to adjust power use. Low Battery Notification When the battery charge level drops below 15%, the TC8000 displays a notice to connect the TC8000 to power. Place the TC8000 into a cradle to charge the battery. Figure 1-14 Low Battery Notification When the battery charge drops below 10%, the TC8000 displays a notice to connect the TC8000 to power. The user must charge the battery using one of the charging accessories. When the battery charge drops below 5%, the TC8000 turns off. TC8000Place the TC8000 into a cradle to charge the battery. Battery Optimization Observe the following battery saving tips:
Set the screen to turn off after a short period of non-use. See Setting Screen Timeout Setting on page 1-13. Review Copy 1 - 12 TC8000 User Guide Reduce screen brightness. See Setting the Screen Brightness on page 1-13. Turn off all wireless radios when not in use. Turn off automatic syncing for Email, Calendar, Contacts and other applications. Use the Power Control widget to check and control the status of radios, the screen brightness, and syncing. Minimize use of applications that keep the TC8000 from suspending, for example, music and video applications. Turning Off the Radios To turn off all the radios:
NOTE Alternately, you can place the device into Airplane mode using the Quick Settings option. 1. Press the power button until the menu appears. 2. Touch Airplane mode. The airplane icon appears in the Status bar indicating that all the radios are off. Setting the Date and Time The date and time is automatically synchronized using a NITZ server when the TC8000 is connected to a cellular network. The user is only required to set the time zone or set the date and time when not connected to a cellular network.
>
Date & time. 1. Touch 2. Touch Automatic date & time to disable automatic date and time synchronization. 3. Touch Set date. 4. Move the sliders up and down to select the month, date and year. 5. Touch Done. 6. Touch Set time. 7. Move the sliders up and down to select the hour, minutes and part of the day. 8. Touch Done. 9. Touch Select time zone. 10. Select the current time zone from the list. 11. Touch
. Display Setting Use Display settings to change the screen brightness, set sleep time and change font size. Review Copy Setting the Screen Brightness To set the screen brightness:
Getting Started 1 - 13 1. Touch 2. Touch Brightness.
>
Display. Figure 1-15 Brightness Dialog Box 3. In the Brightness dialog box, use the slider to set a brightness level. 4. Touch
. Setting Screen Timeout Setting To set the screen sleep time:
1. Touch
>
Display > Sleep. 2. Select one of the sleep values. 15 seconds 30 seconds 1 minute 2 minutes 5 minutes (default) 10 minutes 30 minutes Never. 3. Touch
. Setting Font Size To set the size of the font is system applications:
1. Touch
>
Display > Font size. 2. Select one of the font size values. Small Normal (default) Large Huge. 3. Touch
. Review Copy 1 - 14 TC8000 User Guide General Sound Setting Use the Sounds settings to configure media and alarm volumes. On the Home screen, touch
>
Sounds. Alternately, touch the Status bar and drag down to open the Notification panel. Touch
>
>
Sounds. Figure 1-16 Sounds Screen Volumes Use to change the volume of media, ringtones, notifications and alarms. Review Copy Getting Started 1 - 15 Figure 1-17 Volumes Dialog Box
- Controls the music and media volume.
- Controls the system notification volume.
- Controls the alarm clock volume.
- Controls the scan good decode beep volume. Bottom row icons:
- Places the system notification in silent mode.
- Places the system notification in sound mode. System Default notification sound - Touch to select a sound to play for all system notifications. Touch sounds - Check to play a sound when making screen selections (default enabled). Screen lock sounds- Check to play a sound when locking and unlocking the screen (default disabled). Wake-Up Sources By default the TC8000 wakes from suspend mode when one of the activities in the screen below occurs. The user can disable any of these wake-up sources. 1. Touch
> Wake-Up Sources. 2. Touch a checkbox to enable or disable the source. Review Copy 1 - 16 TC8000 User Guide Figure 1-18 Wake-Up Sources Dialog Box 3. Touch
. Review Copy CHAPTER 2 USING THE TC8000 Introduction This chapter describes the screens, status and notification icons, and controls on the TC8000, and provides basic instructions for using the TC8000. Home Screen The Home screen displays when the TC8000 turns on. Depending upon the configuration, the Home screen might appear different. Contact your system administrator for more information. After a suspend or screen time-out, the Home screen displays with the lock sliders. Slide to the right toward to unlock the screen. For screen locking information see Un-Locking the Screen on page 2-11. 1 2 4 3 8 7 6 5 Figure 2-1 Home Screen Review Copy 2 - 2 TC8000 User Guide NOTE The Home screen icons can be configured by the user and may look different than shown. The Home screen consists of the following:
Table 2-1 Home Screen Items Item 1 Status Bar Displays the time, status icons (right side), and notification icons (left side). For more information see Status Icons on page 2-2 and Managing Notifications on page 2-4. Description 2 PTT Express Icon Opens the PTT Express Client application. 3 Menu Icon 4 Home Icon Displays running applications. Displays the Home screen. 5 All Apps Icon Opens the APPS window. 6 Back Icon Displays the previous screen. 7 Settings Icon Opens the Settings window. 8 Shortcut Icons Opens applications installed on the TC8000. See Application Shortcuts and Widgets on page 2-5 for more information. 9 Widgets Launches stand-alone applications that run on the Home screen. See Application Shortcuts and Widgets on page 2-5 for more information. The Home screen provides four additional screens for placement of widgets and shortcuts. Swipe the screen left or right to view the additional screens. Status Bar The Status bar displays the time, notification icons (left side) and status icons (right side). If there are more notifications than can fit in the Status bar, displays indicating that more notifications exist. Open the Notifications panel to view all notifications and status. Status Icons Table 2-2 Status Icons Icon Description Indicates that the Alarm is active. Indicates that the ringer is silenced. Indicates that the battery is fully charged. Indicates that the battery is partially drained. Review Copy Using the TC8000 2 - 3 Table 2-2 Status Icons (Continued) Icon Description Indicates that the battery charge is low. Indicates that the battery charge is very low. Indicates that the battery is charging. Indicates that the Airplane Mode is active. All radios are turned off. Indicates that Bluetooth is on. Connected to a Wi-Fi network. No Wi-Fi signal. Notification Icons Table 2-3 Notification Icons Icon Description Indicates that more notifications are available for viewing. Indicates that data is syncing. Indicates an upcoming event. Indicates that an open Wi-Fi network is available. Indicates that a song is playing. Indicates that a problem with sign-in or sync has occurred. Indicates that the TC8000 is uploading data. Indicates that the TC8000 is downloading data when animated and download is complete when static. Indicates that the TC8000 is connected via USB cable. Indicates that the TC8000 is connected to or disconnected from virtual private network (VPN). Review Copy 2 - 4 TC8000 User Guide Table 2-3 Notification Icons (Continued) Icon Description Preparing Internal Storage. Indicates that USB debugging is enabled on the TC8000. Indicates that the MultiUser feature is enabled. Appears only when MultiUser Administrator application is installed. Indicates that a new user is logging in. Appears only when MultiUser Administrator application is installed. Indicates that the RxLogger application is running and capturing data. Managing Notifications Notification icons report the arrival of new messages, calendar events, and alarms, as well as ongoing events. When a notification occurs, an icon appears in the Status bar with a brief description. See Notification Icons on page 2-3 for a list of possible notification icons and their description. Open the Notifications panel to view a list of all the notifications. To open the Notification panel, drag the Status bar down from the top of the screen. Figure 2-2 Notification Panel To respond to a notification, open the Notifications Panel and then touch a notification. The Notifications Panel closes and the subsequent activity is dependent on the notification. To clear all notifications, open the Notifications Panel and then touch removed. All event-based notifications are Ongoing notifications remain in the list. To close the Notification Panel, drag the bottom of the Notifications Panel to the top of the screen or press. Review Copy Using the TC8000 2 - 5 Application Shortcuts and Widgets Application shortcuts placed on the Home screen allow quick and easy access to applications. Widgets are self-contained applications placed on the Home screen to access frequently used features. Adding an Application or Widget to the Home Screen 1. Go to the desired Home screen. 2. Touch
. 3. Swipe right, if necessary, to find the application icon or widget. 4. Touch and hold the icon or widget until the Home screen appears. 5. Position the icon on the screen and then release. Moving Items on the Home Screen 1. Touch and hold the item until it floats on the screen. 2. Drag the item to a new location. Pause at the edge of the screen to drag the item onto an adjacent Home screen. 3. Lift finger to place the item on the Home screen. Removing an App or Widget from the Home Screen 1. Go to the desired Home screen. 2. Touch and hold the application shortcut or widget icon until it floats on the screen. 3. Drag the icon to on the top of the screen and then release. Folders Use Folders to organize similar applications together. Tap the folder to open and display items in the folder. Creating a Folder To create a folder, there must be at least two app icons on the Home screen. 1. Go to the desired Home screen. 2. Touch and hold on one application icon. 3. Drag the icon and stack on top of another icon. 4. Lift and release. Naming Folders 1. Touch the folder. Review Copy 2 - 6 TC8000 User Guide Figure 2-3 Open Folder 2. Touch the title area and enter a folder name using the keyboard. 3. Touch Done. 4. Touch anywhere on the Home screen to close the folder. The folder name appears under the folder. Figure 2-4 Renamed Folder Removing a Folder 1. Touch and hold the folder icon until it enlarges. 2. Drag the icon to and release. Home Screen Wallpaper NOTE Use of Live Wallpaper may reduce battery life. Changing the Home Screen Wallpaper NOTE Use of Live Wallpaper may reduce battery life. 1. Touch and hold the desktop until the menu appears. 2. From the Choose wallpaper from menu, touch Gallery, Live wallpapers or Wallpapers. Gallery - Select to use an image stored on the device. Live wallpapers - Select to use an animated wallpaper image. Wallpapers - Select to use a wallpaper image. 3. Touch Save or Set wallpaper. Using the Touchscreen Use the multi-tap sensitive screen to operate the device. Tap - Tap to:
select items on the screen press on-screen buttons. type letters and symbols using the on-screen keyboard Review Copy Using the TC8000 2 - 7 Tap and Hold - Tap and hold:
an item on the Home screen to move it to a new location or to the trash. an item in Apps to create a shortcut on the Home screen. an empty area on the Home screen until the menu appears. the Home screen to open a menu for customizing the Home screen. Drag - Tap and hold an item for a moment and then move finger on the screen until reaching the new position. Swipe - Move finger up and down or left and right on the screen to:
unlock the screen view additional Home screens view additional application icons in the Launcher window view more information on an applications screen. Double-tap - Tap twice on a web page, map, or other screen to zoom in and out. Pinch - In some applications, zoom in and out by placing two fingers on the screen and pinching them together (to zoom out) or spreading them apart (to zoom in). Using the On-screen Keyboard Use the on-screen keyboard to enter text in a text field. To configure the keyboard settings, touch and hold
(comma) >
and then select Android keyboard settings. Editing Text Edit entered text and use menu commands to cut, copy, and paste text within or across applications. Some applications do not support editing some or all of the text they display; others may offer their own way to select text. Entering Numbers, Symbols and Special Characters To enter numbers and symbols:
Touch and hold one of the top-row keys until a menu appears then select a number. Keys with alternate characters display an ellipsis ( ... ) below the character. Touch and hold the Shift key with one finger, touch one or more capital letters or symbols to enter them, and then lift both fingers to return to the lowercase keyboard. Touch Touch the to switch to the numbers and symbols keyboard. key on the numbers and symbols keyboard to view additional symbols. To enter special characters, touch and hold a number or symbol key to open a menu of additional symbols. A larger version of the key displays briefly over the keyboard. Keys with alternate characters display an ellipsis ( ... ) below the character. Review Copy 2 - 8 TC8000 User Guide Applications The APPS screen displays icons for all installed applications. The table below lists the applications installed on the TC8000. Refer to the TC8000 Integrator Guide for information on installing and uninstalling application. Table 2-4 Applications Icon Description App Gallery - Provides links to utilities and demonstration applications that can be installed on the TC8000. Bluetooth Pairing Utility Use to pair the RS507 Hans-free Imager with the TC8000 by scanning a bar code. Browser - Use to access the Internet or intranet. Calculator - Provides the basic and scientific arithmetic functions. Camera - Take photos or record videos. Calendar - Use to manage events and appointments. Clock - Use to schedule alarms for appointments or as a wake-up. DataWedge - Enables data capture using the imager. Downloads - Lists all downloads files. DWDemo - Provides a way to demonstrate the data capture features using the imager. See DataWedge Demonstration on page 5-18 for more information. elemez - Use to provide diagnostic information. See Elemez on page 5-22 for more information. Email - Use to send and receive email. File Browser - Organize and manage files on the TC8000. See File Browser on page 5-1 for more information. Gallery - Use to view photos stored on the device. For more information, see Gallery on page 5-12 for more information. Review Copy Using the TC8000 2 - 9 Table 2-4 Applications (Continued) Icon Description MLog Manager - Use to capture log files for diagnostics. See MLog Manager on page 5-19 for more information. Mobi Control Stage Opens the Mobi Control Stage application to stage the device. Movie Studio - Create movie videos. MSP Agent - Enables management of the TC8000 from an MSP server. Requires the purchase of an appropriate MSP client license per device to suit the level of management functionality required. Music - Play music stored on the device. People - Use to manage contact information. People on page 5-3 for more information. Print Station - Use to print labels and receipts directly to a Zebra ZPL printer via USB, Bluetooth or WLAN. PTT Express - Use to launch PTT Express client for VoIP communication. Rapid Deployment- Allows the TC8000 to stage a device for initial use by initiating the deployment of settings, firmware and software. Requires the purchase of an MSP client license per device. RxLogger - Use to diagnose device and application issues. See the TC8000 Integrator Guide for more information. Search - Use the Google search engine to search the Internet and the TC8000. Settings - Use to configure the TC8000. SimulScan Demo - Use to demonstrate the document capture feature of the TC8000. Sound Recorder - Use to record audio. StageNow - Allows the TC8000 to stage a device for initial use by initiating the deployment of settings, firmware and software. Zebra Tap & Pair - Use to pair the TC8000 with a Zebra Bluetooth printer. Review Copy 2 - 10 TC8000 User Guide Table 2-4 Applications (Continued) Icon Description Zebra Utilities - Use to print bar code labels and receipts directly to a Zebra printer via Bluetooth or WLAN. AppLock Administrator - Use to configure the Application Lock feature. This icon appears after the optional application is installed. MultiUser Administrator - Use to configure the MultiUser feature. This icon appears after the optional application is installed. Secure Storage Administrator - Use to configure the Secure Storage feature. This icon appears after the optional application is installed. Accessing Applications All applications installed on the device are accessed using the APPS window. 1. On the Home screen, touch
. Figure 2-5 APPS Window 2. Slide the APPS window left or right to view more application icons. Touch an icon to open the application. NOTE See Application Shortcuts and Widgets on page 2-5 for information on creating a shortcut on the Home screen. Switching Between Recent Applications 1. Touch and hold
. A window appears on the screen with icons of recently used applications. Review Copy Using the TC8000 2 - 11 Figure 2-6 Recently Used Applications 2. Slide the window up and down to view all recently used applications. 3. Swipe left or right to remove application from the list and force close the application. 4. Touch an icon to open it or touch to return to the current screen. Un-Locking the Screen Use the Lock screen to protect access to data on the TC8000. Some email account require locking the screen. See Chapter 11, Settings for information on setting up the locking feature. The Locking feature functions differently in Single User mode or Multiple User mode. Single User Mode When locked, a pattern, PIN or password is required to unlock the device. Press the Power button to lock the screen. The device also locks after a pre-defined time-out. Press and release the Power button to wake the device. The Lock screen displays. Slide to the right toward to unlock the screen. If the Pattern screen unlock feature is enabled, the Pattern screen appears instead of the Lock screen. If the PIN or Password screen unlock feature is enabled, enter the PIN or password after unlocking the screen. Review Copy 2 - 12 TC8000 User Guide Figure 2-7 Lock Screen Figure 2-8 PIN Screen Figure 2-9 Pattern Screen Review Copy Using the TC8000 2 - 13 Figure 2-10 Password Screen MultiUser Mode With MultiUser login, multiple users can log on to the device with each user having access to various applications and features. When enabled, the Login screen appears after powering on, resetting or after the device wakes from suspend mode. MultiUser Login 1. In the Login text field, enter the username. Figure 2-11 Multiple User Log In Screen In the Password text field, enter the password. 2. 3. Touch OK. After a resume from suspend, the user must enter the password. MultiUser Logout 1. Drag the Status Bar down from the top of the screen. Review Copy 2 - 14 TC8000 User Guide 2. Touch MultiUser is active. 3. Touch Logout. 4. The Login screen appears. Suspend Mode The TC8000 goes into suspend mode when the user presses the Power button or after a period of inactivity (set in the Display settings window). To wake the TC8000 from Suspend mode, press the Power button. Alternately, press the Trigger button to wake the device. The Lock screen displays. Slide is enabled, the Pattern screen appears instead of the Lock screen. See Un-Locking the Screen on page 2-11. to unlock the screen. If the Pattern screen unlock feature to the right toward NOTE If the user enters the PIN, password or pattern incorrectly five times, they must wait 30 seconds before trying again. If the user forgets the PIN, password or pattern contact the system administrator. Figure 2-12 Lock Screen Review Copy Using the TC8000 2 - 15 Resetting the TC8000 There are four reset functions:
Soft reset Hard reset. Performing a Soft Reset Perform a soft reset if applications stop responding. 1. Press the power button until the menu appears. 2. Touch Reset. 3. The device reboots. Performing a Hard Reset CAUTION Perform a hard reset only if the TC8000 stops responding. To perform a hard reset, simultaneously press and hold the power button, trigger and PTT button for five seconds. When the device reboots, release the buttons and trigger. Review Copy 2 - 16 TC8000 User Guide Review Copy CHAPTER 3 DATA CAPTURE Introduction The TC8000 has the following data capture options. integrated SE-965 Standard Range Laser integrated SE-4750-SR Standard Range Imager integrated digital camera optional RS507. NOTE By default, the good decode beep is set to system volume (Notifications). The good decode beep can be set to another sound (Ringer, Music and Media or Alarms) and the volume can be independently controlled. See the DataWedge section in the TC8000 Integrator Guide for more information. Status LED The Charing/Scan LED indicates data capture status. Table 3-1 describes the Status LED indications. Charging/Scan LED Figure 3-1 Charging/Scan LED Review Copy 3 - 2 TC8000 User Guide Table 3-1 Charging/Scan LED Indicators LED Status Indication Off Solid Green Not scanning. Successful decode. Laser Scanning The TC8000 with laser scanner has the following features:
Reading of a variety of bar code symbologies, including the most popular linear, postal, and 1-D code types. Intuitive aiming for easy point-and-shoot operation. Imaging The TC8000 with an integrated imager has the following features:
Omnidirectional (360) reading of a variety of bar code symbologies, including the most popular linear, postal, PDF417, and 2D matrix code types. The ability to capture and download images to a host for a variety of imaging applications. Advanced intuitive laser aiming for easy point-and-shoot operation. The imager uses digital camera technology to take a digital picture of a bar code, stores the resulting image in its memory, and executes state-of-the-art software decoding algorithms to extract the data from the image. Operational Modes The TC8000 with an integrated imager supports three modes of operation, listed below. Activate each mode pressing the Scan button. Decode Mode: In this mode, the TC8000 attempts to locate and decode enabled bar codes within its field of view. The imager remains in this mode as long as you hold the scan button, or until it decodes a bar code. Pick List Mode: This mode allows you to selectively decode a bar code when more than one bar code is in the TC8000s field of view. To accomplish this, move the aiming crosshair center dot over the required bar code to decode only that bar code. This feature is ideal for pick lists containing multiple bar codes and manufacturing or transport labels containing more than one bar code type (either 1D or 2D). Image Capture Mode: Use this mode to capture an image within the TC8000s field of view. This is useful for capturing signatures or images of items like damaged boxes. Digital Camera The device with an integrated camera based bar code scanning solution has the following features:
Omnidirectional reading of a variety of bar code symbologies, including the most popular linear, postal, QR, PDF417, and 2D matrix code types. Review Copy Data Capture 3 - 3 Cross-hair reticle for easy point-and-shoot operation. Picklist mode to decode a particular bar code from many in the field of view. The solution uses the advanced camera technology to take a digital picture of a bar code, and executes state-of-the-art software decoding algorithms to extract the data from the image. Scanning Considerations Scanning consists of; aim, scan and decode. Scanning performance can be optimized by considering the range and the scanning angle:
Range Any scanning device decodes well over a particular working range (minimum and maximum distances from the bar code). This range varies according to bar code density and scanning device optics. Scanning within range brings quick and constant decodes; scanning too close or too far away prevents decodes. Move the scanner closer and further away to find the right working range for the bar codes being scanned. However, the situation is complicated by the availability of various integrated scanning modules. The best way to specify the appropriate working range per bar code density is through a chart called a decode zone for each scan module. A decode zone simply plots working range as a function of minimum element widths of bar code symbols. Angle The scan angle is important for optimizing decode performance. When laser beams reflect directly back into the scanner from the bar code, this specular reflection can blind the scanner. To avoid this, scan the bar code so that the beam does not bounce directly back. But do not scan at too sharp an angle; the scanner needs to collect scattered reflections from the scan to make a successful decode. Practice quickly shows what tolerances to work within. NOTE Contact the Zebra Support if chronic scanning difficulties develop. Decoding of properly printed bar codes should be quick and effortless. Bar Code Capture with Laser Scanner To read a bar code, a scan-enabled application is required. The TC8000 contains the DataWedge application that allows the user to enable the scanner to decode bar code data and display the bar code content. See DataWedge on page 3-14 for information on enabling DataWedge. 1. Launch a scanning application. 2. Point the exit window at a bar code. Review Copy 3 - 4 TC8000 User Guide Figure 3-2 Laser Scanning 3. Press the trigger button. Ensure the red scan beam covers the entire bar code. The Charging/Scan LED Indicators illuminate green and a beep sounds to indicate a successful decode. Figure 3-3 Laser Aiming 4. Release the trigger or scan button. Bar Code Capture with Imager To read a bar code, a scan-enabled application is required. The TC8000 contains the DataWedge application that allows the user to enable the scanner to decode bar code data and display the bar code content. See DataWedge on page 14 for more information on launching DataWedge. 1. Launch a scanning application. 2. Point the exit window at a bar code. Review Copy 3. Press the trigger button. Data Capture 3 - 5 Figure 3-4 Imager Scanning 4. Ensure the red scan beam covers the entire bar code. The Charging/Scan LED Indicators illuminate green and a beep sounds to indicate a successful decode. Figure 3-5 Imager Aiming Pattern Review Copy 3 - 6 TC8000 User Guide Figure 3-6 Imager Pick List Mode with Multiple Bar Codes 5. Release the trigger. Bar Code Capture with Camera To read a bar code, a scan-enabled application is required. The TC8000 contains the DataWedge application that allows the user to enable the scanner to decode bar code data and display the bar code content. See DataWedge on page 3-14 for more information on launching DataWedge. 1. Launch a scanning application. 2. Point the camera window at a bar code. 3. Press and hold the trigger. By default, a preview window appears on the screen. Figure 3-7 Camera Scanning NOTE When Picklist mode is enabled, move the TC8000 until the bar code is centered under the red target on the screen. Review Copy Data Capture 3 - 7 4. Move the TC8000 until the bar code is visible on the screen. 5. The Decode LED lights green, a beep sounds and the device vibrates, by default, to indicate the bar code was decoded successfully. 6. The captured data appears in the text field. 7. Release the trigger. Bar Code Capture with RS507 Hands-Free Imager Pair the RS507 with the TC8000. See Pairing the RS507 Hands-Free Imager Using SSI on page 3-8 or Pairing the RS507 Hands-Free Imager Using Bluetooth HID on page 3-9 for more information. 1. Ensure that an application is open on the device and a text field is in focus (text cursor in text field). 2. Point the RS507 at a bar code. Figure 3-8 Bar Code Scanning with RS507 3. Press and hold the trigger. The red laser aiming pattern turns on to assist in aiming. Ensure the bar code is within the area formed by the cross-hairs in the aiming pattern. The aiming dot is used for increased visibility in bright lighting conditions. The RS507 LEDs light green, a beep sounds to indicate the bar code was decoded successfully. Note that when the RS507 is in Pick List Mode, the RS507 does not decode the bar code until the center of the crosshair touches the bar code. Review Copy 3 - 8 TC8000 User Guide Figure 3-9 Aiming Pattern Figure 3-10 Pick List Mode with Multiple Bar Codes in Aiming Pattern 4. The captured data appears in the text field. Pairing the RS507 Hands-Free Imager Using SSI An RS507 Hands-free Imager can be used with the device to capture bar code data. 1. Ensure that the two devices are within 10 meters (32.8 feet) of one another. 2. Install the battery into the RS507. 3. On the TC8000, touch
. 4. Touch (Bluetooth pairing Utility icon). Review Copy Data Capture 3 - 9 Figure 3-11 Bluetooth Pairing Utility 5. Using the RS507, scan the bar code on the screen. The RS507 emits a high/low/high/low beeps. The Scan LED flashes green indicating that the RS507 is attempting to establish connection with the TC8000. When connection is established, the Scan LED turns off and the RS507 emits one string of low/high beeps. 6. On the TC8000, touch
. Pairing the RS507 Hands-Free Imager Using Bluetooth HID An RS507 Hands-free Imager can be used with the device to capture bar code data. 1. Ensure that Bluetooth is enabled on both devices. 2. Ensure that the Bluetooth device to discover is in discoverable mode. 3. Ensure that the two devices are within 10 meters (32.8 feet) of one another. 4. Place the RS507 in Human Interface Device (HID) mode. If the RS507 is already in HID mode, skip to step 5. a. Remove the battery from the RS507. b. Press and hold the Restore key. c. d. Keep holding the Restore key for about five seconds until a chirp is heard and the Scan LEDs flash green. e. Scan the bar code below to place the RS507 in HID mode. Install the battery onto the RS507. Review Copy 3 - 10 TC8000 User Guide Figure 3-12 RS507 Bluetooth HID Bar Code 5. Remove the battery from the RS507. 6. Re-install the battery into the RS507. 7. Touch
. Bluetooth. 8. Touch 9. Touch SCAN FOR DEVICES. The device begins searching for discoverable Bluetooth devices in the area and displays them under AVAILABLE DEVICES. 10. Scroll through the list and select RS507. The device connects to the RS507 and Connected appears below the device name. The Bluetooth device is added to the Bluetooth devices list and a trusted (paired) connection is established. Hands Free Scanning Figure 3-13 Hands Free Scanning Settings Scanning Mode Review Copy Data Capture 3 - 11 Figure 3-14 Scanning Mode Dialog Box Proximity Range Figure 3-15 Proximity Trigger Range Dialog Box Review Copy 3 - 12 TC8000 User Guide Ergonomic Recommendations During Scanning Proper Scanning Standing High Scanning Low Scanning Figure 3-16 Proper Scanning Position Review Copy Improper Scanning Data Capture 3 - 13 Figure 3-17 Do Not Bend Wrist Excessively Review Copy 3 - 14 TC8000 User Guide DataWedge Enable DataWedge To enable DataWedge:
.
>
>
1. Touch 2. Touch Settings. 3. Touch the DataWedge enabled checkbox. A blue checkmark appears in the checkbox indicating that DataWedge is enabled. 4. Touch
. Disable DataWedge To disable DataWedge:
.
>
>
1. Touch 2. Touch Settings. 3. Touch the DataWedge enabled checkbox. The blue checkmark disappears from the checkbox indicating that DataWedge is disabled. 4. Touch
. Review Copy Data Capture 3 - 15 Pairing the RS507 Hands-Free Imager using HID An RS507 Hands-free Imager can be used with the device to capture bar code data. 1. Ensure that Bluetooth is enabled on both devices. 2. Ensure that the Bluetooth device to discover is in discoverable mode. 3. Ensure that the two devices are within 10 meters (32.8 feet) of one another. 4. Place the RS507 in Human Interface Device (HID) mode. If the RS507 is already in HID mode, skip to step 5. a. Remove the battery from the RS507. b. Press and hold the Restore key. c. d. Keep holding the Restore key for about five seconds until a chirp is heard and the Scan LEDs flash green. e. Scan the bar code below to place the RS507 in HID mode. Install the battery onto the RS507. Figure 3-18 RS507 Bluetooth HID Bar Code 5. Remove the battery from the RS507. 6. Re-install the battery into the RS507. 7. On the TC8000, touch
. Bluetooth. 8. Touch 9. Touch SCAN FOR DEVICES. The device begins searching for discoverable Bluetooth devices in the area and displays them under AVAILABLE DEVICES. 10. Scroll through the list and select RS507. The device connects to the RS507 and Connected appears below the device name. The Bluetooth device is added to the Bluetooth devices list and a trusted (paired) connection is established. Review Copy 3 - 16 TC8000 User Guide Pairing the RS507 Hands-Fee Imager Using SSI An RS507 Hands-free Imager can be used with the device to capture bar code data. 1. Ensure that the two devices are within 10 meters (32.8 feet) of one another. 2. Install the battery into the RS507. 3. On the TC8000, touch
. 4. Touch
. Figure 3-19 Bluetooth Pairing Utility 5. Using the RS507, scan the bar code on the screen. The RS507 emits a high/low/high/low beeps. The Scan LED flashes green indicating that the RS507 is attempting to establish connection with the TC8000. When connection is established, the Scan LED turns off and the RS507 emits one string of low/high beeps. 6. On the TC8000, touch
. Review Copy CHAPTER 4 WIRELESS Wireless Local Area Networks Wireless local area networks (WLANs) allow the TC8000 to communicate wirelessly inside a building. Before using the TC8000 on a WLAN, the facility must be set up with the required hardware to run the WLAN (sometimes known as infrastructure). The infrastructure and the TC8000 must both be properly configured to enable this communication. Refer to the documentation provided with the infrastructure (access points (APs), access ports, switches, Radius servers, etc.) for instructions on how to set up the infrastructure. Once the infrastructure is set up to enforce the chosen WLAN security scheme, use the Wireless & networks settings configure the TC8000 to match the security scheme. The TC8000 supports the following WLAN security options:
Open Wireless Equivalent Privacy (WEP). Wi-Fi Protected Access (WPA/WPA2) Personal (PSK). Extensible Authentication Protocol (EAP). Protected Extensible Authentication Protocol (PEAP) - with MSCHAPV2 and GTC authentication. Transport Layer Security (TLS) TTLS - with Password Authentication Protocol (PAP), MSCHAP and MSCHAPv2 authentication. LEAP EAP-FAST - with MSCHAPV2 and GTC authentication. The Status bar displays icons that indicate Wi-Fi network availability and Wi-Fi status. See Status Bar on page 2-2 for more information. NOTE Turn off Wi-Fi when not using it, to extend the life of the battery. Review Copy 4 - 2 TC8000 User Guide Scan and Connect to a Wi-Fi Network 1. Touch
. Figure 4-1 Settings Screen 2. Slide the Wi-Fi switch to the ON position. 3. Touch Wi-Fi. The TC8000 searches for WLANs in the area and lists them. Figure 4-2 Wi-Fi Screen 4. Scroll through the list and select the desired WLAN network. 5. For open networks, touch profile once or press and hold and then select Connect to network or for secure networks enter the required password or other credentials then touch Connect. See the system administrator for more information. 6. The TC8000 obtains a network address and other required information from the network using the dynamic host configuration protocol (DHCP) protocol. To configure the TC8000 with a fixed internet protocol (IP) address, See Configuring the Device to Use a Static IP Address on page 4-6. In the Wi-Fi setting field, Connected appears indicating that the TC8000 is connected to the WLAN. 7. Review Copy Wireless 4 - 3 Configuring a Wi-Fi Network To set up a Wi-Fi network:
1. Touch
. Wi-Fi. 2. Touch 3. Slide the switch to the ON position. 4. The device searches for WLANs in the area and lists them on the screen. 5. Scroll through the list and select the desired WLAN network. 6. Touch the desired network. If the network security is Open, the device automatically connects to the network. For all other network security a dialog box appears. Figure 4-3 WLAN Network Security Dialog Box 7. 8. If the network security is WEP or WPA/WPS2 PSK, enter the required password and then touch Connect. If the network security is 802.1x EAP:
Review Copy 4 - 4 TC8000 User Guide Touch the EAP method drop-down list and select PEAP, TLS, TTLS, LEAP or FAST. Touch the Phase 2 authentication drop-down list and select an authentication method. If required, touch CA certificate and select a Certification Authority (CA) certificate. Note: Certificates are installed using the Security settings. If required, touch User certificate and select a user certificate. Note: User certificates are installed using the Location & security settings. If required, in the Identity text box, enter the username credentials. If desired, in the Anonymous identity text box, enter an anonymous identity username. If required, in the Password text box, enter the password for then given identity. NOTE By default, the network Proxy is set to None and the IP settings is set to DHCP. See Configuring for a Proxy Server on page 4-5 for setting connection to a proxy server and see Configuring the Device to Use a Static IP Address on page 4-6 for setting the device to use a static IP address. 9. Touch Connect. 10. Touch
. Manually Adding a Wi-Fi Network Manually add a Wi-Fi network if the network does not broadcast its name (SSID) or to add a Wi-Fi network when out of range. 1. Touch
. Wi-Fi. 2. Touch 3. Slide the Wi-Fi switch to the On position. 4. Touch + in the bottom left corner of the screen. 5. 6. 7. 8. 9. In the Network SSID text box, enter the name of the Wi-Fi network. In the Security drop-down list, select the type of security. Options:
None WEP WPA/WPA2 PSK 802.1x EAP. If the network security is None, touch Save. If the network security is WEP or WPA/WPA2 PSK, enter the required password and then touch Save. If the network security is 802.1x EAP:
Touch the EAP method drop-down list and select PEAP, TLS, TTLS, LEAP or FAST. Touch the Phase 2 authentication drop-down list and select an authentication method. If required, touch CA certificate and select a Certification Authority (CA) certificate. Note: Certificates are installed using the Security settings. Review Copy Wireless 4 - 5 If required, touch User certificate and select a user certificate. Note: User certificates are installed using the Security settings. If required, in the Identity text box, enter the username credentials. If desired, in the Anonymous identity text box, enter an anonymous identity username. If required, in the Password text box, enter the password for then given identity. By default, the network Proxy is set to None and the IP settings is set to DHCP. See Configuring for a Proxy Server on page 4-5 for setting connection to a proxy server and see Configuring the Device to Use a Static IP Address on page 4-6 for setting the device to use a static IP address. 1. Touch Connect. 2. Touch
. Configuring for a Proxy Server A proxy server is a server that acts as an intermediary for requests from clients seeking resources from other servers. A client connects to the proxy server, requesting some service, such as a file, connection, web page, or other resource, available from a different server. The proxy server evaluates the request according to its filtering rules. For example, it may filter traffic by IP address or protocol. If the request is validated by the filter, the proxy provides the resource by connecting to the relevant server and requesting the service on behalf of the client. It is important for enterprise customers to be able to set up secure computing environments within their companies, and proxy configuration is an essential part of doing that. Proxy configuration acts as a security barrier ensuring that the proxy server monitors all traffic between the Internet and the intranet. This is normally an integral part of security enforcement in corporate firewalls within intranets. In the Wi-Fi list, touch a network. 1. 2. Touch Show advanced options checkbox. 3. Touch Proxy settings and select Manual. Figure 4-4 Proxy Settings 4. 5. In the Proxy hostname text box, enter the address of the proxy server. In the Proxy port text box, enter the port number for the proxy server. NOTE When entering proxy addresses the Bypass proxy for field, do not use spaces or carriage returns between addresses. 6. In the Bypass proxy for text box, enter addresses for web sites that do not require to go through the proxy server. Use the separator | between addresses. Review Copy 4 - 6 TC8000 User Guide 7. Touch Connect. 8. Touch
. Configuring the Device to Use a Static IP Address By default, the device is configured to use Dynamic Host Configuration Protocol (DHCP) to assign an Internet protocol (IP) address when connecting to a wireless network. To configure the device to connect to a network using a static IP address:
In the Wi-Fi list, touch a network. 1. 2. Touch Show advanced options checkbox. 3. Touch IP settings and select Static. Figure 4-5 Static IP Settings 4. 5. 6. 7. In the IP address text box, enter an IP address for the device. If required, in the Gateway text box, enter a gateway address for the device. If required, in the Network prefix length text box, enter a the prefix length. If required, in the DNS 1 text box, enter a Domain Name System (DNS) address. If required, in the DNS 2 text box, enter a DNS address. 8. 9. Touch Connect. 10. Touch
. Advanced Wi-Fi Settings NOTE Advanced Wi-Fi settings are for the device not for a specific wireless network. Use the Advanced settings to configure additional Wi-Fi settings. From the Wi-Fi screen, touch view the advanced settings.
> Advanced to General Network notification - When enabled, notifies the user when an open network is available. Keep Wi-Fi on during sleep - Opens a menu to set whether and when the Wi-Fi radio turns off. Always On - The radio stays on when the device enters suspend mode. Only when plugged in - The radio stays on while the device is connected to external power. Review Copy Wireless 4 - 7 Never On - The radio turns off when the device enters suspend mode (default). Install Certificates Touch to install certificates. MAC address - Displays the Media Access Control (MAC) address of the device when connecting to Wi-Fi networks. Regulatory Country selection - Displays the acquired country code if Auto is selected else displays the selected country code. Default: Auto. Region code - Displays the configured region code for the device. Band and Channel Selection Wi-Fi frequency band - Use to select the frequency band. Options: Auto (default), 5 GHz only or 2.4 GHz only. Available channels (2.4 GHz) - Use to select specific channels. Touch to display the Available channels menu. Select specific channels. Touch OK. Available channels (5 GHz) - Use to select specific channels. Touch to display the Available channels menu. Select specific channels. Touch OK. Logging Advanced Logging Touch to enable advanced logging. Wireless logs - Use to capture Wi-Fi log files. Fusion Logger - Touch to open the Fusion Logger application. This application maintains a history of high level WLAN events which helps to understand the status of connectivity. Figure 4-6 Fusion Logger Screen Fusion Status - Touch to display live status of WLAN state. Also provides information of device and connected profile. Review Copy 4 - 8 TC8000 User Guide Figure 4-7 Fusion Status Screen About Version - Displays the current Fusion information. Remove a Wi-Fi Network To remove a remembered or connected network:
1. Touch
. 2. Touch Wi-Fi. 3. 4. In the Wi-Fi networks list, touch and hold the name of the network. In the menu, touch Forget network. 5. Touch
. Wi-Fi Advanced Features Some additional Wi-Fi settings cannot be accessed from the User Interface. They can be configured by using Wi-Fi
(CSP). Refer to EMDK documentation for the details on the Wi-Fi settings configuration using the Wi-Fi CSP. Auto Time Config - Using this feature, the device can sync up its time with Zebra WLAN infrastructure. This feature works only when the device is connected to Zebra WLAN infrastructure and the feature is enabled on the WLAN infrastructure side. Default: disabled. PMKID Caching - Allows the device to skip 802.1x authentication during roaming if it had previously connected to that AP with a full 802.1x authentication. Default: disabled. Note: disable OKC when enabling PMKID Caching. Opportunistic Key Caching - Use this feature to skip 802.1x authentication during roaming. The device will go for full 802.1x authentication for the first time it connects to the network. For subsequent roaming, the device skips 802.1x authentication. Default: enabled. Review Copy Wireless 4 - 9 Cisco Centralized Key Management - Allows the device to skip 802.1x and key-handshake phases during roaming. This feature is available only when the device is connected to a Cisco infrastructure that supports Cisco Centralized Key Management (CCKM). Default: enabled. Fast Transition - Fast Transition (FT) is the fast roaming standard, 802.11r. With this feature, the device can skip 802.1x and key-handshake phases during roam. Default: enabled. Fast Transition Resource Information Container - Allows the device to request TSPEC as part of reassociation frame exchange. This helps to avoid sending a separate resource request after roaming is completed. Default: disabled. Power Save - The device can be configured to work in different power save modes:
i. Active - Keeps the WLAN radio always in active mode (i.e. power save mode disabled). ii. Power save using WMM-PS - This is the default power save mode. Device uses WMM-PS power save method if the AP is configured to use this. If the AP is not supporting WMM-PS, the device will use PS-Poll power save method. iii. Power save using PS-Poll - In this method, the device will use PS-Poll frames to retrieve buffered frames from the AP. iv. Null Data Power Save - In Null Data Power Save (NDP), the device will stay awake for 100 ms after the last frame is sent or received. The device will send a Null Data packet with power management bit cleared to retrieve buffered frames from the AP. FIPS - The device supports FIPS 140-2 Level 1. In this mode, the device will not support TKIP and WEP encryption modes. When Wi-Fi is enabled, the stack will run predefined tests to make sure that the encryption engine is working correctly and the firmware and firmware loader modules are correct. 802.11k - Using 802.11k, the device can discover neighbor APs and adds support for different types of radio resource measurements. Default: enabled. Band Preference - The device can be configured to prefer one band over another. By default, device prefers 5 GHz frequency band over 2.4 GHz. Subnet Roaming - When the device roams between different sub networks, if it detects that it is roaming to a different subnet, the device will request a fresh IP address. Default: disabled. Zebra Mobility Extensions Zebra Mobility Extensions make use 802.11 specifications and Zebra proprietary extensions to achieve the highest level of performance, efficiency and reliability. The TC8000 adds support for the following Zebra Mobility Extensions. Coverage Hole Detection - The TC8000 includes enhancements to the IEEE 802.11k standard. These improvements will report gaps in signal coverage to the Zebra wireless LAN infrastructure. Network administrators can detect and mitigate coverage gaps present in the network for greater reliability. Default:
enabled. Aggregated Fast Transition - Aggregated FT improves on IEEE 802.11r, Over-the-DS fast roaming. In conjunction with Zebra wireless LAN infrastructure, the TC8000 will achieve more reliable and consistent fast roaming. Default: enabled. Scan Assist - The TC8000 monitors neighbor access points and retrieves roaming related information from the Zebra wireless LAN infrastructure without doing scans. Using this Scan Assist feature, the TC8000 improves roaming. Default: enabled. Review Copy 4 - 10 TC8000 User Guide Bluetooth Bluetooth-equipped devices can communicate without wires, using frequency-hopping spread spectrum (FHSS) radio frequency (RF) to transmit and receive data in the 2.4 GHz Industry Scientific and Medical (ISM) band
(802.15.1). Bluetooth wireless technology is specifically designed for short-range (10 meters (32.8 feet)) communication and low power consumption. Devices with Bluetooth capabilities can exchange information (e.g., files, appointments, and tasks) with other Bluetooth enabled devices such as printers, access points, and other mobile devices. Adaptive Frequency Hopping Adaptive Frequency Hopping (AFH) is a method of avoiding fixed frequency interferers, and can be used with Bluetooth voice. All devices in the piconet (Bluetooth network) must be AFH-capable in order for AFH to work. There is no AFH when connecting and discovering devices. Avoid making Bluetooth connections and discoveries during critical 802.11b communications. AFH for Bluetooth consists of four main sections:
Channel Classification - A method of detecting an interference on a channel-by-channel basis, or pre-defined channel mask. Link Management - Coordinates and distributes the AFH information to the rest of the Bluetooth network. Hop Sequence Modification - Avoids interference by selectively reducing the number of hopping channels. Channel Maintenance - A method for periodically re-evaluating the channels. When AFH is enabled, the Bluetooth radio hops around (instead of through) the 802.11b high-rate channels. AFH coexistence allows Enterprise devices to operate in any infrastructure. The Bluetooth radio in this device operates as a Class 2 device power class. The maximum output power is 2.5 mW and the expected range is 10 meters (32.8 ft.). A definition of ranges based on power class is difficult to obtain due to power and device differences, and whether one measures open space or closed office space. NOTE It is not recommended to perform Bluetooth wireless technology inquiry when high rate 802.11b operation is required. Security The current Bluetooth specification defines security at the link level. Application-level security is not specified. This allows application developers to define security mechanisms tailored to their specific need. Link-level security occurs between devices, not users, while application-level security can be implemented on a per-user basis. The Bluetooth specification defines security algorithms and procedures required to authenticate devices, and if needed, encrypt the data flowing on the link between the devices. Device authentication is a mandatory feature of Bluetooth while link encryption is optional. Pairing of Bluetooth devices is accomplished by creating an initialization key used to authenticate the devices and create a link key for them. Entering a common personal identification number (PIN) in the devices being paired generates the initialization key. The PIN is never sent over the air. By default, the Bluetooth stack responds with no key when a key is requested (it is up to user to respond to the key request event). Authentication of Bluetooth devices is based-upon a challenge-response transaction. Bluetooth allows for a PIN or passkey used to create other 128-bit keys used for security and encryption. The encryption key is derived from the link key used to authenticate the pairing devices. Also worthy of note is the limited range and fast frequency hopping of the Bluetooth radios that makes long-distance eavesdropping difficult. Recommendations are:
Review Copy Wireless 4 - 11 Perform pairing in a secure environment Keep PIN codes private and do not store the PIN codes in the device Implement application-level security. Bluetooth Profiles The device supports the following Bluetooth services:
Service Discovery Protocol (SDP) - Handles the search for known and specific services as well as general services. Serial Port Profile (SPP) - Allows use of RFCOMM protocol to emulate serial cable connection between two Bluetooth peer devices. For example, connecting the device to a printer. Generic Access Profile (GAP) - Controls connections in Bluetooth. Makes device visible and determines how two devices communicate. GATT -
Advanced Audio Distribution Profile (A2DP) - Allows the device to stream stereo-quality audio to a wireless headset or wireless stereo speakers. Audio/Video Remote Control Profile (AVRCP) - Allows the device to control A/V equipment to which a user has access. It may be used in concert with A2DP. Human Interface Device Profile (HID) - Allows Bluetooth keyboards, pointing devices, gaming devices and remote monitoring devices to connect to the device. FTP -
Object Push Profile (OPP) - Allows the device to push and pull objects to and from a push server. Bluetooth Power States The Bluetooth radio is off by default. Suspend - When the TC8000 goes into suspend mode, the Bluetooth radio stays on. Airplane Mode - When the TC8000 is placed in Airplane Mode, the Bluetooth radio turns off. When Airplane mode is disabled, the Bluetooth radio returns to the prior state. When in Airplane Mode, the Bluetooth radio can be turned back on if desired. Bluetooth Radio Power Turn off the Bluetooth radio to save power or if entering an area with radio restrictions (e.g., an airplane). When the radio is off, other Bluetooth devices cannot see or connect to the device. Turn on the Bluetooth radio to exchange information with other Bluetooth devices (within range). Communicate only with Bluetooth radios in close proximity. NOTE To achieve the best battery life turn off radios when not in use. Enabling Bluetooth 1. Touch
. Review Copy 4 - 12 TC8000 User Guide 2. Slide the Bluetooth switch to the ON position. also appears in the Status bar. 3. Touch
. Disabling Bluetooth
. 1. Touch 2. Slide the Bluetooth switch to the OFF position. 3. Touch
. Discovering Bluetooth Device(s) The TC8000 can receive information from discovered devices without pairing. However, once paired, the TC8000 and a paired device exchange information automatically when the Bluetooth radio is on. To find Bluetooth devices in the area:
1. Ensure that Bluetooth is enabled on both devices. 2. Ensure that the Bluetooth device to discover is in discoverable mode. 3. Ensure that the two devices are within 10 meters (32.8 feet) of one another. 4. Touch
. 5. Touch Bluetooth. 6. Touch SCAN FOR DEVICES. The TC8000 begins searching for discoverable Bluetooth devices in the area and displays them under AVAILABLE DEVICES. 7. Scroll through the list and select a device. The Bluetooth pairing request dialog box appears. Figure 4-8 Bluetooth Pairing - Enter PIN Figure 4-9 Bluetooth Pairing - Smart Pairing 8. Enter a PIN in the text box and touch OK. Enter the same PIN on the other device. 9. For Simple Pairing, touch Pair on both devices. 10. The Bluetooth device is added to the Bluetooth devices list and a trusted (paired) connection is established. Review Copy Wireless 4 - 13 Changing the Bluetooth Name By default, the TC8000 has a generic Bluetooth name that is visible to other devices when connected. 1. Touch
. 2. Touch Bluetooth. 3. If Bluetooth is not on, slide the switch to the ON position. 4. Touch 5. Touch Rename device. 6. Enter a name and touch Done. 7. Touch
. Connecting to a Bluetooth Device Once paired, connect to a Bluetooth device. 1. Touch
. 2. Touch Bluetooth. 3. If Bluetooth is not on, slide the switch to the ON position. In the PAIRED DEVICES list, touch and hold on a unconnected Bluetooth device until a menu appears. 4. 5. Touch Connect. When connected, the device is displayed as connected in the list. Selecting Profiles on the Bluetooth Device Some Bluetooth devices have multiple profiles. To select a profile:
1. Touch
. 2. Touch Bluetooth. In the PAIRED DEVICES list, touch 3. 4. Under PROFILES, check or uncheck a profile to allow the device to use that profile. 5. Touch next to the device name. Unpairing a Bluetooth Device To unpair a Bluetooth device and erase all pairing information:
1. Touch
. 2. Touch Bluetooth. 3. In the PAIRED DEVICES list, touch next to the device name. Review Copy 4 - 14 TC8000 User Guide 4. Touch Unpair. 5. Touch
. Near Field Communications NFC/HF RFID is a short-range wireless connectivity technology standard that enables secure transaction between a reader and a contactless smartcard. The technology is based on ISO/IEC 14443 type A and B (proximity) and ISO/IEC 15693 (vicinity) standards, using the HF 13.56 MHz unlicensed band. The TC8000 support 3 operating modes:
Reader mode Peer-to-Peer communication Card Emulation mode. Using NFC, the TC8000 can:
Read contactless cards such as contactless tickets, ID cards and ePassport. Read and write information to contactless cards such as SmartPosters and tickets, as well as devices with NFC interface such as vending machines. Read information from supported medical sensors. Pair with supported Bluetooth devices such as printers and headsets. Exchange data with another NFC device. Emulate contactless card such as payment, ticket or SmartPoster. The TC8000 NFC antenna is uniquely positioned to read NFC cards from the back of the device while being held in the user's hand. Reading NFC Cards 1. Launch an NFC enabled application. 2. Hold device as shown. Review Copy Wireless 4 - 15 Figure 4-10 Reading Cards 3. Move TC8000 close to the NFC card until the TC8000 detects the card. 4. Hold the card steadily until the transaction is complete (usually indicated by the application). Sharing Information Using NFC You can beam content like a web page, contact cards, pictures, YouTube links or location information from the screen to another device by bringing the devices together back to back. Make sure both devices are unlocked, support NFC, and have both NFC and Android Beam turned on. 1. Open a screen that contains a web page, video, photo or contact. 2. Move the back of the TC8000 toward the back of the other device. When the devices connect, you hear a sound, the image on the screen reduces in size, the message Touch to beam appears. 3. Touch anywhere on the screen. The transfer begins. Enterprise NFC Settings The Enterprise NFC Settings provides advanced configuration of the NFC radio. To configure the NFC settings, touch Settings > More ... > Enterprise NFC Settings. Review Copy 4 - 16 TC8000 User Guide Figure 4-11 Wireless & Networks Screen Review Copy Wireless 4 - 17 Figure 4-12 Enterprise NFC Settings Screen Reader Mode Touch to open the Reader Mode setting screen. Enable P2P mode Enable or disable peer to peer mode. Default: Enabled. Enable CE mode Touch to enable or disable card emulation mode. Default: Enabled. Enable NFC on Lock Screen Enable or disable NFC on lock screen. Default: Disabled. Reset to Default Reset all NFC settings to factory default settings. Reader Mode Use the Reader Mode settings to configure the NFC radio. Review Copy 4 - 18 TC8000 User Guide Figure 4-13 Reader Mode Settings Supported Cards Touch to select the type of NFC cards to support. Options: All Cards (default), Type A, Type B, Type F or Type V. NDEF Support Skip NDEF Enables or disables the use of NFC Forum tag types 1 through 4. Default: Disabled. Card Detection Mode Card detection mode Touch to select the card detection mode. Options: Low power, Standard or Hybrid (default). CPU Speed Touch to enhance NFC transaction performance while reading small amounts data. Default:
Disabled. Card Communication speed Touch to set the baud rate for type A and type B cards. Options: 106 kbps (default for Type A), 212 kbps, 424 kbps or No restrictions (default for Type B). Card Communication Speed Baud rate for 144434 cards - Options: 106 kbps (default), 212 kbps, 424 kbps or 848 kbps. Review Copy CHAPTER 5 APPLICATIONS Introduction This chapter describes the applications installed on the device. File Browser Use the File Browser application to view and mange files on the device. To open File Browser, touch
>
. 3 4 1 2 5 Figure 5-1 File Browser Screen The address bar (1) indicates the current folder path. Touch the current folder path to manually enter a path and folder name. Use Use
(2) to select multiple files/folder.
(3) to view the internal storage root folder. Review Copy 5 - 2 TC8000 User Guide Use
(4) to view the Internal Storage root folder.
(5) to view the previous folder or to exit the application. Use Touch and hold an item to perform an operation on that item. Select one of the options from the File Operations menu:
Information - View detailed information about the file or folder. Move - Move the file or folder to a new location. Copy - Copy the select file. Delete - Delete the selected file. Rename - Rename the select file. Open as - Open the selected file as a specific file type. Share - Share the file with other devices. Touch to open additional functionality:
Touch Touch Touch Touch Touch Touch Touch
> New Folder to create a new folder in the current folder.
> Search to search for a file or folder.
> Sort to sort the list by name, by type, by size or by date.
> Refresh to re-display the contents of the current folder.
> List View to change the folder view from tile to list format.
> Change Size to change the size of the icons: Large, Normal or Small.
> About File Browser to view the application version information. Review Copy Applications 5 - 3 People Use the People application to manage contacts. From a Home or Apps screen, touch the top of the screen: Groups, All contacts, and Favorites. Touch the tabs to change how to view the contacts. Swipe up or down to scroll through the lists. People opens to the main list of contacts. View contacts in three ways at Adding People 1. 2. In the People application, touch
. If there are more than one account with contacts, touch the one to use. 3. Type the contacts name and other information. Touch a field to start typing, and swipe down to view all categories. 4. To add more than one entry for a category for example, to add a work address after typing a personal address touch Add new for that field. To open a menu with preset labels, such as Home or Work for an email address, touch the label to the right of the item of contact information. Or, to create your own label, touch Custom in the menu. 5. Touch Done. Editing People 1. In the People application, touch tab. 2. Touch a person to edit. 3. Touch
. 4. Touch Edit. 5. Edit the contact information. 6. Touch Done. Deleting People 1. In the People application, touch tab. 2. Touch a person to edit. 3. Touch 4. Touch Delete. 5. Touch OK to confirm. Review Copy 5 - 4 TC8000 User Guide Camera This section provides information for taking photos and recording videos using the integrated digital cameras. NOTE If a microSD card is installed, The TC8000 saves photos and videos on the microSD card. If a microSD card is not installed, the TC8000 saves photos and videos on the internal storage. Figure 5-2 Camera Photo Screen 1 2 3 Camera Options Touch to select Camera, Video or Panorama mode. Shutter button - Touch to take a photo, a panoramic photo or to record a video. Photo Settings Touch to select camera settings. Taking Photos NOTE Camera settings are described in Photo Settings on page 5-9. 1. Touch
. Review Copy Applications 5 - 5 Figure 5-3 Camera Mode 2. If necessary, touch the camera options icon and touch
. 3. Frame the subject on the screen. 4. To zoom in or out, press two fingers on the display and pinch or expand fingers. The zoom controls appear on the screen. Review Copy 5 - 6 TC8000 User Guide Figure 5-4 Camera Zoom 5. Touch an area on the screen to focus. The focus circle appears on the screen. The two horizontal bars turn green when in focus. 6. Touch
. The camera takes a photo and a shutter sound plays. Alternately, touch The photo momentarily displays as a thumbnail in the upper right corner. and hold to focus first, before taking a photo; then release to take a focused photo. Taking a Panoramic Photo Panorama mode lets the user create a single wide image by panning slowly across a scene. 1. Touch
. Review Copy Applications 5 - 7 Figure 5-5 Panoramic Mode 2. Touch the options bar and touch
. 3. Frame one side of the scene to capture. 4. Touch and slowly start panning across the area to capture. A small white square appears inside the button indicating the capture is in progress. If panning too quickly, the message Too fast appears. 5. Touch to end the shot. The panorama appears immediately and a progress indicator displays while it saves the image. Recording Videos To record a video:
1. Touch
. Review Copy 5 - 8 TC8000 User Guide Figure 5-6 Video Mode 2. Touch the options bar and touch
. 3. Point the camera and frame the scene. 4. To zoom in or out, press two fingers on the display and pinch or expand fingers. The zoom controls appear on the screen. Review Copy Applications 5 - 9 Figure 5-7 Camera Zoom 5. Touch to start recording. The device starts recording the video. The video time appears in the top left of the screen. 6. Touch to end recording. The video momentarily displays as a thumbnail in the upper right corner. Photo Settings When in Photo mode, photo settings are displayed on screen. Touch to display the photo settings options. Touch to display the photo setting options. Figure 5-8 Photo Setting Options HDR Touch to enable High Dynamic Range (HDR) imaging. HDR adds more dynamic range to photographs (the ratio of light to dark). HDR uses three photos, taken at different exposures to create the photo (default - disabled). Review Copy 5 - 10 TC8000 User Guide First
:
Scene mode - Touch to select a preset combination of camera settings designed for specific scenes. Options: Auto (default), Night, Portrait, Landscape, Steady Photo, Sports or Document capture. Picture size - Touch to set the size (in pixels) of the photo. Options: 8M pixels (default), 5M pixels, 3M pixels, HD 1080p, 2M pixels, 1.3M pixels, HD720, 1M pixels, WVGA, VGA or QVGA. Picture quality - Touch to select picture quality setting. Options: Super fine (default), Fine or Normal. ZSL - Set the camera to immediately take a picture when the button is pressed (default disabled) Countdown timer - Options: Off (default), 1 second, 2 seconds, 3 seconds, 4 seconds, 5 seconds, 10 seconds, 15 seconds, 20 seconds, 30 seconds or 60 seconds. Beep during countdown - Select to play a beep tone during countdown (default enabled). Second
:
Face detection - Select to enable face detection (default enabled). Touch AF/AEC - Select to enable auto focus (default enabled). Sharpness - Touch to select a sharpness level. Options: Level 0, Level 1, Level 2, Level 3 (default), Level 4, Level 5 or Level 6. Select Auto Exposure - Touch to select auto exposure setting. Options: Frame Average (default), Center Weighted or Spot Metering. Third
:
Anti Banding - Options: Off, 50 Hz, 60 Hz or Auto (default). Select ISO - Set how sensitive the camera is to light. Options: Auto (default), ISO Auto (HJR), ISO100, ISO200, ISO400, ISO800 or ISO1600. Exposure - Touch to adjust the exposure settings. Options: +2, +1, 0(default), -1 or -2. White balance - Touch to select how Camera adjusts colors in different kinds of light, to achieve the most natural-looking colors. Incandescent - Adjust the white balance for incandescent lighting. Fluorescent - Adjust the white balance for florescent lighting. Auto - Adjust the white balance automatically (default). Daylight - Adjust the white balance for daylight. Cloudy - Adjust the white balance for a cloudy environment. Flash mode - Touch to set whether Rear-facing Camera relies on its light meter to decide whether a flash is necessary, or to turn it on or off for all shots. Off - Disable flash. Auto - Camera adjusts flash automatically depending upon light meter (default). On - Enable flash upon taking a photo. Torch - Turn flash on continuously. Focus Mode - Touch to select the camera focus setting. Options: Auto, Infinity, Macro or Continuous Auto Focus (CAF) (default). AE-Bracket - Touch to set Automatic Exposure Bracketing (default disabled). Review Copy Video Settings When in Video mode, video settings are displayed on screen. Touch to display the video settings options. Touch to display the photo setting options. Applications 5 - 11 Figure 5-9 Video Setting Options First Time lapse - Touch to select a time interval to set the frame rate for time lapse photography. Options: Off
(default), Slide switch to ON and then set time interval. Video quality - Touch to select video quality:
HD 1080p - High definition 1080p (default). HD 720p - High definition 720p. SD 480p - Standard definition 480p. Video duration - Options: 30 seconds (MMS) or 30 minutes (default). Second White balance - Touch to select how Camera adjusts colors in different kinds of light, to achieve the most natural-looking colors. Incandescent - Adjust the white balance for incandescent lighting. Fluorescent - Adjust the white balance for florescent lighting. Auto - Adjust the white balance automatically (default). Daylight - Adjust the white balance for daylight. Cloudy - Adjust the white balance for a cloudy environment. Flash mode - Select to turn on flash (default disabled). Review Copy 5 - 12 TC8000 User Guide Gallery NOTE The device supports the following image formats: jpeg, gif, png and bmp. The device supports the following video formats: H.263, H.264 and MPEG4 Simple Profile. Use Gallery to:
view photos play videos perform basic editing of photos set photos as wallpaper set photos as a contact photo share photos and videos. To open the Gallery application, touch
>
. Gallery presents all photos and videos stored in memory. Figure 5-10 Gallery Albums Touch an album to open it and view its contents. The photos and videos in the album are displayed in chronological order. Touch a photo or video in an album to view it. Touch Touch icon (top left corner) to return to the main Gallery screen. to return to the main Gallery screen. Working with Albums Albums are groups of images and videos in folders. Touch an album to open it. The photos and videos are listed in a chronologically ordered grid. The name of the album displays at the top of the screen. Review Copy Applications 5 - 13 Figure 5-11 Photos Inside an Album Swipe left or right to scroll images across the screen. Share an Album 1. Touch
>
. 2. Touch and hold an album until it highlights. 3. Touch other albums as required. 4. Touch
. The Share menu opens. Touch the application to use to share the selected albums. 5. Follow the instructions within the selected application. Get Album Information 1. Touch
>
. 2. Touch and hold an album until it highlights. 3. Touch
. 4. Touch Details. Deleting an Album To delete an album and its contents:
1. Touch
>
. 2. Touch and hold an album until it highlights. 3. Check other albums to delete. Ensure that other albums are selected. 4. Touch
. Review Copy 5 - 14 TC8000 User Guide 5. In the Delete selected item? menu, touch OK to delete the album. Working with Photos Use Gallery to view photos and edit and share photos. Viewing and Browsing Photos To view a photo:
1. Touch
>
. 2. Touch an album to open it. 3. Touch a photo. Figure 5-12 Photo Example 4. Swipe left or right to view the next or previous photo in the album. 5. Touch the photo to view the controls. 6. Double-tap the screen to zoom in or pinch two fingers together or spread them apart to zoom in or out. 7. Drag the photo to view parts that are not in view. Cropping a Photo 1. In Gallery, touch a photo to view the controls. 2. Touch
. 3. Touch Crop. The white cropping tool appears. 4. Use the cropping tool to select the portion of the photo to crop. Drag from the inside of the cropping tool to move it. Drag an edge of the cropping tool to resize it to any proportion. Drag a corner of the cropping tool to resize it with fixed proportions. Review Copy Applications 5 - 15 Figure 5-13 Cropping Tool 5. Touch SAVE to save a copy of the cropped photo. The original version is retained. Setting a Photo as a Contact Icon 1. Touch
>
. 2. Touch an album to open it. 3. Touch the photo to open it. 4. Touch
. 5. Touch Set picture as. 6. Touch Contact photo. 7. In the People application, touch a contact. 8. Touch the white box and crop the photo accordingly. 9. Touch OK. Share a Photo 1. Touch
>
. 2. Touch an album to open it. 3. Touch a photo to open it. 4. Touch
. 5. Touch the application to use to share the selected photo. The application selected opens with the photo attached to a new message. Review Copy 5 - 16 TC8000 User Guide Deleting a Photo 1. Touch
>
. 2. Touch an album to open it. 3. Touch a photo to open it. 4. Touch
. 5. Touch 6. Touch Delete. 7. Touch OK to delete the photo. Working with Videos Use Gallery to view videos and share videos. Watching Videos 1. Touch
>
. 2. Touch an album to open it. 3. Touch a video. Figure 5-14 Video Example 4. Touch
. The video begins to play. 5. Touch the screen to view the playback controls. Sharing a Video 1. Touch
>
. 2. Touch an album to open it. Review Copy Applications 5 - 17 3. Touch a video to open it. 4. Touch
. The Share menu appears. 5. Touch the application to use to share the selected video. The application selected opens with the video attached to a new message. Deleting a Video 1. Touch
>
. 2. Touch an album to open it. 3. Touch a video to open it. 4. Touch
. 5. Touch 6. Touch Delete. 7. Touch OK. Review Copy 5 - 18 TC8000 User Guide DataWedge Demonstration Use DataWedge Demonstration to demonstrate data capture functionality. Figure 5-15 DataWedge Demonstration Window Table 5-1 DataWedge Demonstration Icons Description Toggles the flash on and off when using the camera to capture bar code data. Use the flash in dimly lit areas.
/
Toggles the data capture function between the internal imager/scanner, internal camera or RS507 Hands-free Bluetooth imager (if connected). Toggles between normal scan mode and picklist mode when capturing bar code data. Icon
/
/
/
Opens a menu to view the application information or to set the application DataWedge profile. NOTE See Chapter 9, DataWedge for information on DataWedge configuration. Either press the Scan key or touch the yellow scan button in the application to enable data capture. The captured data appears in the text field below the yellow button. Review Copy Applications 5 - 19 MLog Manager Use MLog Manager to capture log files for diagnostics. See the TC8000 Integrator Guide for detailed information on configuring the application. Figure 5-16 MLog Manager Review Copy 5 - 20 TC8000 User Guide RxLogger RxLogger is a comprehensive diagnostic tool that provides application and system metrics. It allows for custom plug-ins to be created and work seamlessly with this tool. RxLogger is used to diagnose device and application issues. Its information tracking includes the following: CPU load, memory load, memory snapshots, battery consumption, power states, wireless logging, cellular logging, TCP dumps, Bluetooth logging, GPS logging, logcat, FTP push/pull, ANR dumps, etc. All logs and files generated are saved onto flash storage on the device (internal or external). Figure 5-17 RxLogger RxLogger Configuration RxLogger is built with an extensible plug-in architecture and comes packaged with a number of plugins already built-in. The included plug-ins are described below. Touch
> Settings to open the configuration screen. Configuration File RxLogger configuration can be set using an XML file. The config.xml configuration file is located on the Enterprise storage in the RxLogger\config folder. Copy the file from the device to a host computer using a USB connection. Edit the configuration file and the replace the .XML file on the device. There is no need to stop and restart the RxLogger service since the file change is automatically detected. Enabling Logging 1. Touch
>
. 2. Touch Start. 3. Touch
. Disabling Logging 1. Touch
>
. 2. Touch Stop. Review Copy Applications 5 - 21 3. Touch
. Extracting Log Files 1. Connect the device to a host computer using an USB connection. 2. Using a file explorer, navigate to the On Device Storage in the /RxLogger folder. 3. Copy the file from the device to the host computer. 4. Disconnect the device from the host computer. Review Copy 5 - 22 TC8000 User Guide Elemez NOTE Elemez collects specific device information in the background and sends this information to us to help improve product functionality. This feature can be disabled. See Disabling Elemez Data Collection. Ensure that the date, time and time zone are set correctly prior to using Elemez. Use Elemez to provide diagnostics information to us. Touch Submit Diagnostics button to send the data. Figure 5-18 Elemez Application Disabling Elemez Data Collection The user can disable the Elemez application from collection specific data in the background and sending it to Zebra Technologies. 1. From the Home screen, touch 2. Swipe left or right until the ALL tab displays. 3. Scroll through the list and touch Elemez.
> Apps. 4. In the App info screen, touch Uninstall updates. In the Uninstall updates dialog box, touch OK. 5. 6. Touch OK. 7. After uninstall is complete, touch OK. In the All tab, scroll through the list and touch Elemez. 8. 9. Touch Disable. 10. In the Disable built-in app? dialog box, touch OK. 11. Touch
. Review Copy Enabling Elemez Data Collection The user can re-enable the Elemez application for collection specific data in the background and sending it to Zebra Technologies. Applications 5 - 23
. 1. From the Home screen, touch 2. Touch Manage Apps. 3. Swipe left or right until the ALL tab displays. 4. Scroll through the list and touch Elemez. 5. In the App info screen, touch Enable. 6. Touch 7. Touch Enable Elemez.
>
>
Review Copy 5 - 24 TC8000 User Guide Print Station Use the Print Station app to print labels and receipts directly to a Zebra ZPL printer via USB, Bluetooth or WLAN. Features include:
Discovering and pairing with Zebra printers via a Bluetooth, WLAN or USB connection. Retrieving and displaying a list of document templates stored on the device and on the printer. Using document templates to generate on-screen prompts allowing data entry at print time. Using the camera on the device to scan bar codes for data entry. Supports multiple Zebra printer models using the ZPL command language. Review Copy Zebra Tap & Pair Use the Zebra Tap & Pair application to Applications 5 - 25 Review Copy 5 - 26 TC8000 User Guide Zebra Utilities Use the Zebra Utilities app to print bar code labels and receipts directly to a Zebra printer via Bluetooth or WLAN. Review Copy CHAPTER 6 ACCESSORIES Accessories Table 6-1 Accessories Accessory Part Number Description Cradles 2-Slot USB Charge Cradle CRD-TC8X-2SUCHG-01 5-Slot Charge Only Cradle CRD-TC8X-5SCHG-01 5-Slot Ethernet Cradle CRD-TC8X-5SETH-01 5-Slot Charge Only Cradle with Battery Charger CRD-TC8X-5SC4BC-01 5-Slot Ethernet Cradle with Battery Charger CRD-TC8X-5SE4BC-01 Provides device and spare battery charging and USB communication with a host computer. Use with power supply, p/n PWRS-14000-148R. Charges up to five TC8000 devices. Use with power supply, p/n PWRS-14000-241R and DC line cord, p/n 50-16002-029R. Provides device charging and provides Ethernet communication for up to five devices. Use with power supply, p/n PWRS-14000-241R and DC line cord, p/n 50-16002-029R. Charges up to four TC8000 devices and four spare batteries. Use with power supply, p/n PWRS-14000-241R and DC line cord, p/n 50-16002-029R. Provides device charging and provides Ethernet communication for up to four devices. Provides charging for four spare batteries. Use with power supply, p/n PWRS-14000-241R and DC line cord, p/n 50-16002-029R. Batteries and Chargers Battery BTRY-TC8X-67MA1-01 BTRY-TC8X-67MA1-10 Replacement battery (single pack). Replacement battery (10pack). Review Copy 6 - 2 TC8000 User Guide Table 6-1 Accessories (Continued) Accessory Part Number Description 4-Slot Battery Charger SAC-TC8X-4SCHG-01 USB and Charging Cable CBL-TC8X-USBCHG-01 Charges up to four spare batteries. Requires power supply, p/n PWRS-14000-148R. Provides USB communication and power to the device. Requires power supply PWRS-14000-249R and country specific un-grounded AC line cord. Audio Accessories Quick Disconnect Audio Cable CBL-TC8X-AUDQD-01 3.5 mm Audio Cable CBL-TC8X-AUDBJ-01 Snaps onto the device and provides audio to a wired headset with Quick Disconnect connector. Snaps onto the device and provides audio to a wired headset with 3.5 mm plug. Mounting Brackets 2-Slot Cradle Desktop Stand 5-Slot Cradle Desktop Stand BRKT-SCRD-SSDK-01 Use for mounting a 2-Slot cradle on a desk. BRKT-SCRD-MSDK-01 Use for mounting a 5-Slot cradle on a desk. Rack Mount Bracket BRKT-SCRD-SMRK-01 Desktop Stand MNT-TC8X-DKPH-01 Cart Mount MNT-TC8X-CMKT-01 Forklift Mount MNT-TC8X-FMKT-01 Use for mounting a 5-Slot cradle or four 4-Slot Battery Chargers on a rack. Un-powered desktop presentation stand. Allows to use the device on a flat surface (i.e. desktop) for hands-free scanning. Allows to install the device on carts with up to 2 diameter rail/bar and allows to use the device on free-hand scanning mode. Includes: Includes RAM Mount required for installation. Un-powered forklift mount. Allows to install the device on a roll bar or square surface of a forklift and allows to use the device on landscape or portrait mode. Includes Proclip Mount required for installation. Carrying Solutions Hand Strap SG-TC8X-HDSTP-01 Replacement hand strap. Wrist Lanyard 50-12500-006 Quick Draw Soft Holster SG-TC8X-QDHLST-01 Use to hold the device. Requires the Universal Belt. Presentation Soft Holster SG-TC8X-PMHLST-01 Universal Belt 11-08062-02R Universal Shoulder Strap WA6010 Use to hold the device and scan while in presentation mode. Requires the Universal Shoulder Strap or Universal Belt. Use to hold the Quick Draw Soft Holster or the Presentation Soft Holster. Review Copy Accessories 6 - 3 Table 6-1 Accessories (Continued) Accessory Part Number Description Power Supplies Power Supply PWRS-14000-249R Power Supply PWRS-14000-148R Power Supply PWRS-14000-241R DC Y Cable 25-85993-01R DC Line Cord 50-16002-029R Provides power to the device using the Snap-On USB Cable or Charging Cable Cup. Requires AC line cord. Provides power to the 2Slot cradles and 4-Slot Spare Battery Charger. Requires AC line cord. Provides power to the 5-Slot Charge Only Cradle, 5-Slot Ethernet Cradle, 5-Slot Charge Only Cradle with Battery Charger and the 5-Slot Ethernet Cradle with Battery Charger. Requires DC Line Cord, p/n 50-16002029R and country specific three wire grounded AC line cord sold separately. Use to provide power from the PWRS-14000-241R power supply to two 4-Slot Battery Chargers. Provides power from the power supply to the 5-Slot Charge Only Cradle, 5-Slot Ethernet Cradle, 5-Slot Charge Only Cradle with Battery Charge and 5-Slot Ethernet Cradle with Battery Charger. Miscellaneous Stylus SG-TC7X-STYLUS-03 Stylus for use with the device (3-pack). Screen Protectors MISC-TC8X-SCRN-01 Provides additional protection for display. Review Copy 6 - 4 TC8000 User Guide 2-Slot Charge Only Cradle NOTE Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 7-1. The 2-Slot Charge Only Cradle:
provides 5 VDC power for operating the device charges a spare battery. Charging/Scan LED Spare Battery Spare Battery Charging LED Power LED TC8000 Charging Slot Spare Battery Slot 1. 2. Insert the device into the TC8000 charge well. Insert a spare battery into the spare battery charge well. Battery Charging Main Battery Charging The TC8000 Charging/Scan LED indicates the status of the battery charging in the device. See Table 1-3 on page 1-6. The 6,400 mAh battery fully charges in less than six hours at room temperature. Spare Battery Charging The Spare Battery Charging LED indicates the status of the spare battery charging. The 6,400 mAh battery fully charges in less than six hours at room temperature. Review Copy Accessories 6 - 5 Table 6-2 Spare Battery Charging LED Indicators State Off Solid Amber Solid Green Fast Blinking Red
(2 blinks/second) TC8000 is not charging. TC8000 is not inserted correctly in the cradle or connected to a power source. Charger/cradle is not powered. Indication Battery is charging. Charging is complete. Charging error, e.g.:
- Temperature is too low or too high.
- Charging has gone on too long without completion (typically eight hours). Solid Red Battery is at end of useful life. Charging Temperature Charge batteries in temperatures from 0 C to 40 C (32 F to 104 F). The device or cradle always performs battery charging in a safe and intelligent manner. At higher temperatures (e.g. approximately +37 C (+98 F)) the device or cradle may for small periods of time alternately enable and disable battery charging to keep the battery at acceptable temperatures. The device and cradle indicates when charging is disabled due to abnormal temperatures via its LED. Review Copy 6 - 6 TC8000 User Guide 5-Slot Charge Only Cradle NOTE Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 7-1. The 5-Slot Charge Only Cradle:
Provides 5 VDC power for operating the TC8000. Simultaneously charges up to five TC8000s. Figure 6-1 5-Slot Charge Only Cradle Charging the TC8000 To Charge the TC8000:
1. Insert the TC8000 in a charge well to begin charging. Figure 6-2 TC8000 Battery Charging 2. Ensure that the TC8000 is properly seated in the charge well. Review Copy Accessories 6 - 7 Battery Charging Main Battery Charging The TC8000 Charging/Scan LED indicates the status of the battery charging in the device. See Table 1-3 on page 1-6. The 6,400 mAh battery fully charges in less than six hours at room temperature. Review Copy 6 - 8 TC8000 User Guide 5-Slot Charge Only Cradle with Battery Charger NOTE Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 7-1. The 5-Slot Charge Only Cradle with Battery Charger:
Provides 5 VDC power for operating the TC8000. Simultaneously charges up to four TC8000s. Simultaneously charges up to four spare batteries. Figure 6-3 5-Slot Charge Only Cradle with Battery Charger To Charge the TC8000:
1. Insert the TC8000 in a charge well to begin charging. NEED DRAWING Figure 6-4 TC8000 Battery Charging 2. Ensure that the TC8000 is properly seated in the charge well. Review Copy Accessories 6 - 9 Battery Charging Main Battery Charging The TC8000 Charging/Scan LED indicates the status of the battery charging in the device. See Table 1-3 on page 1-6. The 6,400 mAh battery fully charges in less than six hours at room temperature. Spare Battery Charging Each Battery Charging LED indicates the status of the battery charging in each slot. The table below describes the Battery Charging LED status. The 6,400 mAh battery fully charges in less than six hours at room temperature. Table 6-3 Battery Charging Indicators State Off Solid Amber Solid Green Fast Blinking Red
(2 blinks/second) Indication Battery is not charging. It is not inserted correctly in the cradle or connected to a power source. Charge is not powered. Battery is charging. Charging is complete. Charging error, e.g.:
- Temperature is too low or too high.
- Charging has gone on too long without completion (typically eight hours). Solid Red Battery is at end of useful life. Charging Temperature Charge batteries in temperatures from 0 C to 40 C (32 F to 104 F). The battery charger always performs battery charging in a safe and intelligent manner. At higher temperatures (e.g. approximately +37 C (+98 F)) the battery charger may for small periods of time alternately enable and disable battery charging to keep the battery at acceptable temperatures. The battery charger indicates when charging is disabled due to abnormal temperatures via its LED. Review Copy 6 - 10 TC8000 User Guide 5-Slot Ethernet Cradle NOTE Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 7-1. The 5-Slot Ethernet Cradle:
Provides 5 VDC power for operating the TC8000. Connects up to five TC8000s to an Ethernet network. Simultaneously charges up to five TC8000s. Figure 6-5 5-Slot Ethernet Cradle Charging the TC8000 To charge the TC8000:
1. Insert the TC8000 in a charge well to begin charging. Figure 6-6 TC8000 Battery Charging 2. Ensure that the TC8000 is properly seated in the charge well. Review Copy Accessories 6 - 11 Battery Charging Main Battery Charging The TC8000 Charging/Scan LED indicates the status of the battery charging in the device. See Table 1-3 on page 1-6. The 6,400 mAh battery fully charges in less than six hours at room temperature. Charging Temperature Charge batteries in temperatures from 0 C to 40 C (32 F to 104 F). The battery charger always performs battery charging in a safe and intelligent manner. At higher temperatures (e.g. approximately +37 C (+98 F)) the battery charger may for small periods of time alternately enable and disable battery charging to keep the battery at acceptable temperatures. The battery charger indicates when charging is disabled due to abnormal temperatures via its LED. Establishing Ethernet Communication NOTE Refer to the TC8000 Integrator Guide for information on configuring the Ethernet settings. 1. Touch 2. Touch Ethernet. 3. Slide the Ethernet switch to the ON position. 4. Insert the device into a slot. icon appears in the Status bar. 5. The 6. Touch Eth0 to view Ethernet connection details. Ethernet LED Indicators There are two green LEDs on the side of the cradle. These green LEDs light and blink to indicate the data transfer rate. Table 6-4 LED Data Rate Indicators Data Rate 1000 LED 100/10 LED 1 Gbps 100 Mbps 10 Mbps On/Blink Off Off Off On/Blink On/Blink Review Copy 6 - 12 TC8000 User Guide 5-Slot Ethernet Cradle with Battery Charger NOTE Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 7-1. The 5-Slot Ethernet Cradle:
Provides 5 VDC power for operating the TC8000. Connects up to four TC8000s to an Ethernet network. Simultaneously charges up to four TC8000s. Figure 6-7 5-Slot Ethernet Cradle Charging the TC8000 To charge the TC8000:
1. Insert the TC8000 in a charge well to begin charging. NEED DRAWING Figure 6-8 TC8000 Battery Charging 2. Ensure that the TC8000 is properly seated in the charge well. Review Copy Accessories 6 - 13 Battery Charging Main Battery Charging The TC8000 Charging/Scan LED indicates the status of the battery charging in the device. See Table 1-3 on page 1-6. The 6,400 mAh battery fully charges in less than six hours at room temperature. Spare Battery Charging Each Battery Charging LED indicates the status of the battery charging in each slot. The table below describes the Battery Charging LED status. The 6400 mAh battery fully charges in less than six hours at room temperature. Table 6-5 Battery Charging Indicators State Off Solid Amber Solid Green Fast Blinking Red
(2 blinks/second) Indication Battery is not charging. It is not inserted correctly in the cradle or connected to a power source. Charge is not powered. Battery is charging. Charge complete. Charging error, e.g.:
- Temperature is too low or too high.
- Charging has gone on too long without completion (typically eight hours). Solid Red Battery is at end of useful life. Charging Temperature Charge batteries in temperatures from 0 C to 40 C (32 F to 104 F). The battery charger always performs battery charging in a safe and intelligent manner. At higher temperatures (e.g. approximately +37 C (+98 F)) the battery charger may for small periods of time alternately enable and disable battery charging to keep the battery at acceptable temperatures. The battery charger indicates when charging is disabled due to abnormal temperatures via its LED. Establishing Ethernet Communication NOTE Refer to the TC8000 Integrator Guide for information on configuring the Ethernet settings. 1. Touch 2. Touch Ethernet. 3. Slide the Ethernet switch to the ON position. Review Copy 6 - 14 TC8000 User Guide 4. Insert the device into a slot. icon appears in the Status bar. 5. The 6. Touch Eth0 to view Ethernet connection details. Ethernet LED Indicators There are two green LEDs on the side of the cradle. These green LEDs light and blink to indicate the data transfer rate. Table 6-6 LED Data Rate Indicators Data Rate 1000 LED 100/10 LED 1 Gbps 100 Mbps 10 Mbps On/Blink Off Off Off On/Blink On/Blink Review Copy Accessories 6 - 15 4-Slot Battery Charger NOTE Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 7-1. The 4-Slot Battery Charger charges up to four TC8000 batteries. Battery Charging LEDs (4) Figure 6-9 4-Slot Battery Charger Battery Installation To install the battery:
1. Insert the battery into a battery slot. 2. Gently press down on the battery until it snaps into place. Figure 6-10 Insert Battery into Slot Review Copy 6 - 16 TC8000 User Guide Battery Removal To remove the battery, press the two release latches on each side of the battery and lift the battery out of the battery slot. Figure 6-11 Remove Battery Battery Charging Spare Battery Charging Each Battery Charging LED indicates the status of the battery charging in each slot. The table below describes the Battery Charging LED status. The 6,400 mAh battery fully charges in less than six hours at room temperature. Table 6-7 Battery Charging Indicators State Off Solid Amber Solid Green Fast Blinking Red
(2 blinks/second) Indication Battery is not charging. It is not inserted correctly in the cradle or connected to a power source. Charger is not powered. Battery is charging. Charge complete. Charging error, e.g.:
- Temperature is too low or too high.
- Charging has gone on too long without completion (typically eight hours). Solid Red Battery is at end of useful life. Charging Temperature Charge batteries in temperatures from 0 C to 40 C (32 F to 104 F). The battery charger always performs battery charging in a safe and intelligent manner. At higher temperatures (e.g. approximately +37 C (+98 F)) the battery charger may for small periods of time alternately enable and disable battery charging to keep the battery at Review Copy acceptable temperatures. The battery charger indicates when charging is disabled due to abnormal temperatures via its LED. Accessories 6 - 17 Review Copy 6 - 18 TC8000 User Guide USB and Charging Cable NOTE Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 7-1. The USB and Charging cable snaps onto the top of the TC8000. When attached to the TC8000, allows the TC8000 to transfer data to a host computer and provide power for charging the TC8000. Power Connector USB Connector TC8000 Connector Figure 6-12 Snap-On USB Cable Attaching the USB and Charging Cable 1. Align the tabs on the Audio Adapter with the slots on the device. 2. Rotate the Adapter toward the back of the device until the Adapter snaps onto the device. Figure 6-13 Attach Cable to TC8000 3. Attach the USB connection to the host computer. USB Communication 1. Connect the USB and Charging Cable to the TC8000. 2. Connect the USB connector of the cable to a host computer. Review Copy Accessories 6 - 19 Figure 6-14 Power Setup Removing the USB and Charging Cable To remove the USB and Charging cable:
1. Press the release level toward the cable. 2. Rotate the adapter toward the front of the device and remove. Figure 6-15 Remove Audio Adapter Battery Charging To charge the TC8000, attached the power cable to the Power Connection on the Snap-On USB cable and it in. Main Battery Charging The TC8000 Charging/Scan LED indicates the status of the battery charging in the device. See Table 1-3 on page 1-6. Review Copy 6 - 20 TC8000 User Guide The 6,400 mAh battery fully charges in less than six hours at room temperature. Review Copy Accessories 6 - 21 Quick Disconnect Audio Adapter The Quick Disconnect Audio Adapter snaps onto the top of the TC8000 and removes easily when not in use. When attached to the TC8000, the Quick Disconnect Audio Adapter allows a user to connect a wired headset to the TC8000. Attaching the Audio Adapter 1. Align the tabs on the Audio Adapter with the slots on the device. 2. Rotate the Adapter toward the back of the device until the Adapter snaps onto the device. Figure 6-16 Attach Cable to TC8000 Connecting the Adapter to a Headset Figure 6-17 Removing the Audio Adapter To remove the Audio Adapter:
1. Press the release level toward the cable. Review Copy 6 - 22 TC8000 User Guide 2. Rotate the adapter toward the front of the device and remove. Figure 6-18 Remove Audio Adapter Review Copy Accessories 6 - 23 3.5 mm Audio Adapter The 3.5 mm Audio Adapter snaps onto the top of the TC8000 and removes easily when not in use. When attached to the TC8000, the Audio Adapter allows a user to connect a wired headset to the TC8000. Attaching the Audio Adapter 1. Align the tabs on the Audio Adapter with the slots on the device. 2. Rotate the Adapter toward the back of the device until the Adapter snaps onto the device. Figure 6-19 Attach Cable to TC8000 Removing the Audio Adapter To remove the Audio Adapter:
1. Press the release level toward the cable. 2. Rotate the adapter toward the front of the device and remove. Figure 6-20 Remove Audio Adapter Review Copy 6 - 24 TC8000 User Guide Desktop Stand The Desk Stand provides allows the user place the TC8000 in presentation mode for hands-free scanning. Figure 6-21 Desktop Mount Review Copy Cart Mount The Cart Mount Accessories 6 - 25 Figure 6-22 Cart Mount See TC8000 Integrator Guide for assembly instructions. Review Copy 6 - 26 TC8000 User Guide Quick-Draw Soft Holster Figure 6-23 Quick-Draw Holster Review Copy Presentation Holster Accessories 6 - 27 Figure 6-24 Presentation Holster Review Copy 6 - 28 TC8000 User Guide Stylus To install the stylus onto the hand strap:
1. Thread the loop of the tether through the hole in the stylus. Figure 6-25 Thread Loop through Stylus Hole 2. Thread the other end of the tether through the loop. Figure 6-26 3. Figure 6-27 Feed Loop through Hand Strap Hole 4. Review Copy Accessories 6 - 29 Figure 6-28 Feed Stylus Through Loop 5. Pull stylus through the loop and tighten. Review Copy 6 - 30 TC8000 User Guide Review Copy CHAPTER 7 MAINTENANCE AND TROUBLESHOOTING Introduction This chapter includes instructions on cleaning and storing the TC8000, battery maintenance and provides troubleshooting solutions for potential problems during TC8000 operations. Maintaining the TC8000 For trouble-free service, observe the following tips when using the TC8000:
Protect the TC8000 from temperature extremes. Do not store or use the TC8000 in any location that is extremely dusty, damp, or wet. Use a soft lens cloth to clean the scan exit window of the TC8000. If the surface of the TC8000 screen becomes soiled, clean it with a soft cloth moistened with a diluted window-cleaning solution. Do not use bleach or ammonia. Take care not to scratch the screen of the TC8000. The display of the TC8000 contains glass. Take care not to drop the TC8000 or subject it to strong impact. Battery Safety Guidelines The area in which the TC8000 units are charged should be clear of debris and combustible materials or chemicals. Particular care should be taken where the device is charged in a non-commercial environment. Do not use incompatible batteries and chargers. If you have any questions about the compatibility of a battery or a charger, contact Zebra Support. See Service Information on page xiii for contact information. Do not crush, puncture, or place a high degree of pressure on the battery. Follow battery usage, storage, and charging guidelines found in the TC8000 Quick Reference Guide. To charge the mobile device battery, the battery and charger temperatures must be between +32F and Improper battery use may result in a fire, explosion, or other hazard.
+104F (0C and +40C) Review Copy 7 - 2 TC8000 User Guide Do not disassemble or open, crush, bend or deform, puncture, or shred. Severe impact from dropping any battery-operated device on a hard surface could cause the battery to overheat. Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals. Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, or expose to fire, explosion, or other hazard. Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle or near a radiator or other heat source. Do not place battery into a microwave oven or dryer. Battery usage by children should be supervised. Please follow local regulations to promptly dispose of used re-chargeable batteries. Do not dispose of batteries in fire. Seek medical advice immediately if a battery has been swallowed. In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with large amounts of water and seek medical advice. If you suspect damage to your equipment or battery, call Customer Support to arrange for inspection. See Service Information on page xiii for contact information. Long Term Storage When storing the TC8000 for a long period of time, it is recommended to remove the battery. When returning the TC8000 to everyday operation, install a fully charged battery. Cleaning CAUTION Always wear eye protection. Read warning label on compressed air and alcohol product before using. If you have to use any other solution for medical reasons please contact Symbol Technologies for more information. WARNING! Avoid exposing this product to contact with hot oil or other flammable liquids. If such exposure occurs, unplug the device and clean the product immediately in accordance with these guidelines. Materials Required Alcohol wipes Lens tissue Cotton tipped applicators Isopropyl alcohol Review Copy Maintenance and Troubleshooting 7 - 3 Can of compressed air with a tube. Cleaning the TC8000 Housing Using the alcohol wipes, wipe the housing including the Scan key. Display The display can be wiped down with the alcohol wipes, but care should be taken not to allow any pooling of liquid around the edges of the display. Immediately dried the display with a soft, non-abrasive cloth to prevent streaking. Scan Exit Window Wipe the scan exit window periodically with a lens tissue or other material suitable for cleaning optical material such as eyeglasses. Power Connector 1. Remove the main battery from TC8000. 2. Install the battery cover. 3. Dip the cotton portion of the cotton tipped applicator in isopropyl alcohol. 4. Repeat at least three times. 5. Use the cotton tipped applicator dipped in alcohol to remove any grease and dirt near the connector area. 6. Use a dry cotton tipped applicator and repeat steps 3 through 6. 7. Spray compressed air on the connector area by pointing the tube/nozzle about inch away from the surface. CAUTION Do not point nozzle at yourself and others, ensure the nozzle or tube is away from your face. 8. Inspect the area for any grease or dirt, repeat if required. Cleaning Cradle Connectors Use this procedure to clean the connectors on a cradle:
1. Remove power from the cradle. 2. Dip the cotton portion of the cotton tipped applicator in isopropyl alcohol. 3. Rub the cotton portion of the cotton tipped applicator along the pins of the connector. Slowly move the applicator back-and-forth from one side of the connector to the other. Do not let any cotton residue on the connector. 4. All sides of the connector should also be rubbed with the cotton tipped applicator. 5. Spray compressed air in the connector area by pointing the tube/nozzle about inch away from the surface. CAUTION Do not point nozzle at yourself and others, ensure the nozzle or tube is pointed away from your face. Review Copy 7 - 4 TC8000 User Guide 6. Ensure that there is no lint left by the cotton tipped applicator, remove lint if found. 7. If grease and other dirt can be found on other areas of the cradle, use lint free cloth and alcohol to remove. 8. Allow at least 10 to 30 minutes (depending on ambient temperature and humidity) for the alcohol to air dry before applying power to cradle. If the temperature is low and humidity is high, longer drying time is required. Warm temperature and dry humidity requires less drying time. Cleaning Frequency The cleaning frequency is up to the customers discretion due to the varied environments in which the TC8000 units are used. They may be cleaned as frequently as required. However when used in dirty environments it may be advisable to periodically clean the scanner exit window to ensure optimum scanning performance. Review Copy Maintenance and Troubleshooting 7 - 5 Troubleshooting TC8000 Table 7-1 Troubleshooting the TC8000 Cause Problem Solution TC8000 does not turn on. Battery not charged. Charge or replace the battery in the TC8000. Battery not installed properly. Ensure battery is installed properly. See Installing the Battery on page 1-4. System crash. Battery did not charge. Battery failed. TC8000 removed from cradle before charging completed. Ambient temperature of the cradle is too warm or too cold. TC8000 unplugged from host computer during communication. Communication software was incorrectly installed or configured. During data communication, no data was transmitted, or transmitted data was incomplete. TC8000 turns itself off. TC8000 is inactive. Perform a soft reset. If the TC8000 still does not turn on, perform a hard reset. See Resetting the TC8000 on page 2-15. Replace battery. If the TC8000 still does not operate, try a soft reset, then a hard reset. See Resetting the TC8000 on page 2-15. Insert the TC8000 into the cradle and begin charging. The battery fully charges in approximately four hours. The ambient temperature must be between 0 C and 40 C
(32 F and 104 F). Reconnect the programming cable to the host computer and re-transmit. See system administrator. The TC8000 turns off after a period of inactivity. If the TC8000 is running on battery power, this period can be set to 15 seconds, 30 seconds, 1 minute, 2 minutes, 5 minutes, 10 minutes, or 30 minutes. TC8000Change the setting if you need a longer delay before the automatic shutoff feature activates. Battery is depleted. Place the TC8000 in the cradle to re-charge the battery. Battery is not inserted properly. Insert the battery properly (see Installing the Battery on page 1-4). Place the TC8000 in the cradle to re-charge the battery. The TC8000s battery is low and it powers down to protect memory content. Review Copy 7 - 6 TC8000 User Guide Table 7-1 Troubleshooting the TC8000 (Continued) Problem Cause Solution A message appears stating that the TC8000 memory is full. Too many files stored on the TC8000. Delete unused memos and records. You can save these records on the host computer. Too many applications installed on the TC8000. If you have installed additional applications on the TC8000, remove them to recover memory. See Uninstalling an Application on page 10-4. The TC8000 does not accept scan input. Scanning application is not loaded. Verify that the TC8000 is loaded with a scanning application. See the System Administrator. Unreadable bar code. Ensure the symbol is not defaced. Distance between imager exit window and bar code is incorrect. TC8000 is not programmed for the bar code. TC8000 is not programmed to generate a beep. Battery is low. During USB data communications, no data was transmitted, or transmitted data was incomplete. Incorrect cable connection. Communications software is not installed or configured properly. Move the TC8000 closer or further from the bar code to the proper scanning range. Verify that the TC8000 can read the type of bar code being scanned (See Technical Specifications). Ensure that the bar code parameters are set properly for the bar code being scanned. Verify that a beep on a good decode is used. See Bar Code Input on page 9-10 for more information. If the scanner is still not reading symbols, contact the distributor or service. See Chapter 6, Accessories. Perform setup as described in Chapter 6, Accessories. Ensure that a sync program is installed on the host computer. Cannot sync with Host Computer Host computer not configured properly. Ensure that sync program on the host computer is set to allow USB connections. Review Copy Cradles Symptom Table 7-2 Troubleshooting the Cradles Possible Cause TC8000 was removed from cradle or cradle was unplugged from AC power. TC8000 battery is not charging. Maintenance and Troubleshooting 7 - 7 Solution Ensure cradle is receiving power. Ensure TC8000 is seated correctly. Confirm main battery is charging. The battery fully charges in approximately four hours. Battery is faulty. Verify that other batteries charge properly. If so, replace the faulty battery (see Installing the Battery on page 1-4). The TC8000 is not fully seated in the cradle. Remove and re-insert the TC8000 into the cradle, ensuring it is firmly seated. Ambient temperature of the cradle is too warm or too cold. Move the cradle to an area where the ambient temperature is between 0 C and 40 C (32 F and 104 F). Cradle is not powered. Ensure cradle is receiving power. Cradle firmware is corrupted. The TC8000 is not operational. Cradle - TC8000 communication error. The cradle is issued an unlock command and it fails to unlock. Cradle is overheating due to continuous lock/unlock or other cradle faults. Contact system administrator. Contact system administrator. Contact system administrator. Contact system administrator. Contact system administrator. When the TC8000 is placed in the cradle, the cradle LED does not blink. Cradle LED blinks red. Review Copy 7 - 8 TC8000 User Guide Review Copy APPENDIX A SPECIFICATIONS Technical Specifications The following tables summarize the TC8000s intended operating environment and general technical hardware specifications. Table A-1 Technical Specifications Item Physical and Environmental Characteristics Dimensions (H x L x W) 233 mm x 76 mm x 64 mm Description Weight Display Speaker Main Battery Performance Characteristics CPU 500 g (SE965 scan engine) Color LCD, 4",480x800 WVGA resolution, 16 bits/pixel RGB, 450 Nits LED backlight, capacitive touch screen 2W speaker PowerPrecision+ rechargeable 3.7 VDC 6400 mAh Lithium Ion battery Qualcomm 8060 Pro Dual Core 1.7 GHz Operating System Android -based AOSP 4.4.3 Memory 1 GB RAM / 4 GB Flash, 1 GB RAM / 8 GB Flash optional Application Development Zebra Android EMDK. Data Capture Method User Environment Operating Temperature SE4750 imager (SR and MR), SE965 laser 8 MP auto-focus, color camera w/ flash optional 0 C to 40 C (32 F to 104 F) Storage Temperature
-20 C to 60 C (-4 F to 140 F) Review Copy A - 2 TC8000 User Guide Table A-1 Technical Specifications (Continued) Item Description Battery Charging Temperature 0 C to +40 C (32 F to 104 F) ambient temperature range. Humidity Flammability Drop Specification Sealing ESD 40 C (RH 10% - 95%) Non-condensing UL94V1 4 ft.(1.2 m) to vinyl tile over concrete, over product temperature range. 4 ft.(1.2 m) to concrete, at room temperature of 23 C (73.4 F). Liquid penetration per A4T Casual Spill Test Spec document number 71-98611-01. Applies ONLY with battery installed. 20k VDC air discharge 10k VDC contact discharge Wireless LAN Data Communications Radio IEEE 802.11a/b/g/n/d/h/i/k/r Data Rates Operating Channels Security and Encryption Multimedia Certifications Fast Roam 5GHz: 802.11a/n - up to 72.2 Mbps;
2.4GHz: 802.11b/g/n - up to 72.2 Mbps Channels 36 - 165 (5180 - 5825 MHz) Channels 1 - 13 (2412 - 2472 MHz) Actual operating channels/frequencies depend on regulatory rules and certification agency WEP (40 or 104 bit);
WPA/WPA2 Personal (TKIP, and AES);
WPA/WPA2 Enterprise (TKIP, and AES) - EAP-TTLS (PAP, MSCHAP, MSCHAPv2), EAP-TLS, PEAPv0- MSCHAPv2, PE APv1-EAP-GTC, EAP-FAST (MSCHAPv2 and EAP-GTC) and LEAP Wi-Fi Multimedia (WMM) WFA (802.11n, WMM, WMM-PS), Cisco CCXv4 PMKID Caching, Opportunistic Key Caching (OKC), Cisco CCKM, 802.11r, Zebra Aggregated FT Wireless PAN Data Communications Bluetooth V4.0 with Low Energy USB Imager Decode Capability USB 2.0 Client for service and maintenance Review Copy INDEX A Numerics 2-D bar codes . 3-2 A accessories . 6-1 airplane mode . 1-12 albums . 5-12 application shortcuts . 2-5 applock administrator . 2-10 B bar codes two dimensional . 3-2 battery charging temperature . A-2 battery usage . 1-10 browser . 2-8 bullets . xiii C calculator . 2-8 calendar . 2-8 camera settings . 5-9 cleaning . 7-1 clock . 2-8 configuration . xi contacts . 2-9 conventions notational . xii CPU . A-1 D data capture . xi imager operational modes decode mode . 3-2 image capture mode . 3-2 pick list mode . 3-2 imaging . 3-2 two dimensional bar codes . 3-2 datawedge . 2-8 diagnostics . 5-22 dimensions . A-1 display . xi, A-1 downloads . 2-8 drop specification . A-2 DWDemo . 2-8 E EAP . 4-1 Elemez . 5-22 email . 2-8 F file browser . 2-8, 5-1 G gallery . 2-8 H humidity . A-2 Review Copy Index - 2 TC8000 User Guide I imager. See data capture, imaging imaging . 3-2 information, service . xiii K keyboard . 2-7 L laser scanning . 3-2 LED indicators . 3-1 lithium-ion battery . 1-1 low battery notification . 1-11 M maintenance . 7-1 memory . xi, A-1 mobile computer scanning . 3-1 starting . 1-6 multiuser administrator . 2-10 N naming folders . 2-5 O operating system . xi, A-1 operating temperature . A-1 P parts of the mobile computer . 1-1 PEAP-GTC . 4-1 PEAP-MSCHAPv2 . 4-1 photos . 5-4 R radios . xi recording videos . 5-7 RS507 scanning . 3-7 S scanning angle . 3-3 imaging . 3-2 range . 3-3 scanning considerations . 3-3 screen Symbol splash screen . 1-6 screen lock sound . 1-15 screen timeout . 1-13 screen touch notification . 1-15 secure storage administrator . 2-10 service information . xiii set date . 1-12 set time . 1-12 set time zone . 1-12 setting camera . 5-9 video . 5-11 settings . 2-9 starting the mobile computer . 1-6 storage temperature . A-1 system notification . 1-15 T TLS . 4-1 troubleshooting . 7-5 TTLS TTLS-MSCHAP . 4-1 TTLS-MSCHAPv2 . 4-1 TTLS-PAP . 4-1 U unpacking . 1-1 V video settings . 5-11 videos . 5-4, 5-7 W weight . A-1 WEP . 4-1 WLAN radio . A-2 WPA . 4-1 Review Copy Review Copy Zebra Technologies Corporation, Inc. 3 Overlook Point Lincolnshire, IL 60069, U.S.A. http://www.zebra.com Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. 2015 ZIH Corp and/or its affiliates. All rights reserved. MN002410A01 Revision A - October 2015 Review Copy
1 2 3 | Users Manual Regulatory | Users Manual | 1.71 MiB | / December 05 2016 |
TC8000 Touch Computer Regulatory Guide We reserves the right to make changes to any product to improve reliability, function, or design. We do not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, apparatus, machine, material, method, or process in which our products might be used. An implied license exists only for equipment, circuits, and subsystems contained in the products. Warranty For the complete hardware product warranty statement, go to: http://
www.zebra.com/warranty. Service Information If you have a problem using the equipment, contact your facilitys Technical or Systems Support. If there is a problem with the equipment, they will contact the Global Support Center at: http://www.zebra.com/
support. For the latest version of this guide go to: http://www.zebra.com/support. Zebra Technologies Corporation 3 Overlook Point Lincolnshire, IL 60069, U.S.A. http://www.zebra.com Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. 2015 Symbol Technologies LLC. All Rights Reserved. MN002270A01 Rev. A September 2015 Introduction For detail information on using the TC8000, download the TC8000 User Guide. Go to the Zebra Support site: http://www.zebra.com/support. Regulatory Information This device is approved under Zebra Technologies Corporation. This guide applies to Model Number TC80N0 and TC80NH. All Zebra devices are designed to be compliant with the rules and regulations in the locations they are sold and will be labeled as required. Local language translations are available at the following website:
www.zebra.com/support. Any changes or modifications to Zebra equipment not expressly approved by Zebra could void the user's authority to operate the equipment. For use only with Zebra approved and UL Listed mobile computers, Zebra approved, and UL Listed/Recognized battery packs. CAUTION Only use Zebra approved and UL Listed accessories, battery packs, and battery chargers. Do NOT attempt to charge damp/wet mobile computers or batteries. All components must be dry before connecting to an external power source. Declared maximum operating temperature: 50C. Bluetooth Wireless Technology This is an approved Bluetooth product. For more information or to view the End Product Listing, please visit https://www.bluetooth.org/tpg/
listings.cfm. Wireless Device Country Approvals Note: This section is only applicable to WW/WR/EU configurations. Regulatory markings subject to certification are applied to the device signifying the radio(s) is/are approved for use in the following countries and continents: United States, Canada, Japan, China, South Korea, Australia, and Europe. Please refer to the Declaration of Conformity (DoC) for details of other country markings. This is available at: http://www.zebra.com/doc. Note: Europe includes Austria, Belgium, Bulgaria, Croatia, Czech Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, and the United Kingdom. CAUTION Operation of the device without regulatory approval is illegal. Country Roaming This device incorporates the International Roaming feature
(IEEE802.11d), which will ensure the product operates on the correct channels for the particular country of use. Frequency of Operation IC 5 GHz Only:
The use in the UNII (Unlicensed National Information Infrastructure) band 1 (5150-5250 MHz) is restricted to Indoor Use Only; any other use will make the operation of this device illegal. Industry Canada Statement:
CAUTION CAUTION The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-Channel mobile satellite systems. High power radars are allocated as primary users
(meaning they have priority) of 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices Le dispositive fonctionnant dans la bande 5150-5250 MHz est rserv uniquement pour une utilisation l'intrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. Les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., qu'ils ont la priorit) pour les bands 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.. 2.4 GHz Only The available channels for 802.11 b/g operation in the US are Channels 1 to 11. The range of channels is limited by firmware. Health and Safety Ergonomic Recommendations CAUTION In order to avoid or minimize the potential risk of ergonomic injury, follow the recommendations below. Consult with your local Health and Safety Manager to ensure that you are adhering to your company's safety programs to prevent employee injury. Reduce or eliminate repetitive motion Maintain a natural position Reduce or eliminate excessive force Keep objects that are used frequently within easy reach Perform tasks at correct heights Reduce or eliminate vibration Reduce or eliminate direct pressure Provide adjustable workstations Provide adequate clearance Provide a suitable working environment Improve work procedures Note: The following section is only applicable for mobile computers. Vehicle Installation RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (including safety systems). Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer about any equipment that has been added to your vehicle. An air bag inflates with great force. DO NOT place objects, including either installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result. Position the device within easy reach. Be able to access the device without removing your eyes from the road. Note: Connection to an alert device that will cause a vehicle horn to sound or lights to flash on receipt of a call on public roads is not permitted. IMPORTANT: Before installing or using, check state and local laws regarding windshield mounting and use of equipment. For Safe Installation Do not put your phone in a location that obstructs the drivers vision or interferes with the operation of the Vehicle. Do not cover an airbag. Safety on the Road Do not take notes or use the device while driving. Jotting down a 'to do'
list or flipping through your address book takes attention away from your primary responsibility; driving safely. When driving a car, driving is your first responsibility - Give your full attention to driving. Check the laws and regulations on the use of wireless devices in the areas where you drive. Always obey them. When using a wireless device behind the wheel of a car, practice good common sense and remember the following tips:
1. Get to know your wireless device and any features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road. 2. When available, use a hands free device. 3. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be hazardous. 4. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue. 5. Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations that have the potential to divert your attention from the road. 6. Use your wireless phone to call for help. Dial the Emergency services, (9-1-1 in the US, and 1-1-2 in Europe) or other local emergency number in the case of fire, traffic accident, or medical emergencies. Remember, it is a free call on your wireless phone! The call can be made regardless of any security codes and depending on a network; with or without a SIM card inserted. 7. Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress, or other serious emergency where lives are in danger, call the Emergency Services (9-1-1 in the US, and 1-1-2 in Europe) or other local emergency number as you would want others to do for you. 8. Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number. The wireless industry reminds you to use your device / phone safely when driving. Warnings for Use of Wireless Devices CAUTION Please observe all warning notices with regard to the usage of wireless devices. Potentially Hazardous Atmospheres - Vehicles Use You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants, etc. and areas where the air contains chemicals or particles such as grain, dust, or metal powders and any other area where you would normally be advised to turn off your vehicle engine. Safety in Aircraft Switch off your wireless device whenever you are instructed to do so by airport or airline staff. If your device offers a 'flight mode' or similar feature, consult airline staff as to its use in flight. Safety in Hospitals Laser Devices Class 2 laser scanners use a low power, visible light diode. As with any very bright light source such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful. The following statement is required to comply with US and international regulations. CAUTION Use of controls, adjustments, or the performance of procedures other than those specified herein may result in hazardous laser light exposure. 2 1 Wireless devices transmit radio frequency energy and may affect medical electrical equipment. Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics, or healthcare facilities. These requests are designed to prevent possible interference with sensitive medical equipment. Pacemakers Pacemaker manufacturers recommended that a minimum of 15 cm
(6 inches) be maintained between a handheld wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with independent research and recommendations by Wireless Technology Research. Persons with Pacemakers:
Should ALWAYS keep the device more than 15 cm (6 inches) from their pacemaker when turned ON. Should not carry the device in a breast pocket. Should use the ear furthest from the pacemaker to minimize the potential for interference. If you have any reason to suspect that interference is taking place, turn OFF your device. Other Medical Devices Please consult your physician or the manufacturer of the medical device to determine if the operation of your wireless product may interfere with the medical device. RF Exposure Guidelines Safety Information Reducing RF Exposure - Use Properly Only operate the device in accordance with the instructions supplied. International: The device complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices. For information on 'International' human exposure to electromagnet fields, refer to the Zebra Declaration of Conformity
(DoC) at: http://www.zebra.com/doc. For further information on the safety of RF energy from wireless devices, see http://responsibility.zebra.com/index.php/downloads/, which is located under Wireless Communications and Health. Europe: Hand-Held Devices This device was tested for typical body worn operation. Use only Zebra tested and approved belt clips, holsters, and similar accessories to ensure EU Compliance. U.S. and Canada: Co-located statement To comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must not be co-located or operating in conjunction with any other transmitter/antenna except those already approved in this filling. Hand-Held Devices: This device was tested for typical body worn operation. Use only Zebra tested and approved belt-clips, holsters, and similar accessories to ensure FCC Compliance. The use of third-
party belt clips, holsters, and similar accessories may not comply with FCC RF exposure compliance requirements, and should be avoided. To satisfy US and Canadian RF exposure requirements, a transmitting device must operate with a minimum separation distance of 18 mm or more from a person's body. Pour satisfaire aux exigences Amricaines et Canadiennes d'exposition aux radio frquences, un dispositif de transmission doit fonctionner avec une distance de sparation minimale de 18 mm ou plus de corps d'une personne. Labels Reads 1. LASER LIGHT - DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT. 2. CAUTION - CLASS 3R LASER LIGHT WHEN OPEN. AVOID DIRECT EYE EXPOSURE. 3. COMPLIES WITH 21 CFR1040.10 AND 1040.11 EXCEPT FOR DEVIATIONS PURSUANT TO LASER NOTICE NO. 50, DATED JUNE 24, 2007, AND IEC 60825-1 (Ed.2.0), EN60825-1:2007 AND IEC/EN 60825-1:2014 LED Devices For LED devices which have been evaluated to IEC 62471 and comply with the Exempt Risk Group, no product labeling requirements apply. However, the following statement is required to comply with US and international regulations:
LED Compliance Statement:
Classified as 'EXEMPT RISK GROUP' according to IEC 62471:2006 and EN 62471:2008. Pulse duration: SE4750:1.7 ms Radio Frequency Interference Requirements-FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to Increase the separation between the equipment and receiver. which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The use of 5 GHz WLAN, for use in the U.S., has the following restriction:
Notched Band 5.60 - 5.65 GHz Radio Transmitters (Part 15) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation. Radio Frequency Interference Requirements Canada CAN ICES-3 (B)/NMB-3(B) Radio Transmitters For RLAN Devices:
The use of 5 GHz RLANs, for use in Canada, have the following restrictions:
Restricted Band 5.60 - 5.65 GHz This device is in compliance with the NRC for Industry Canada applicable to license-exempt radios. Use is allowed with the following two conditions: (1) the device must not produce interference, and (2) the device must accept any interference to the radio even if the interference is likely to compromise operation. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radio lectrique subi mme si le brouillage est susceptible d'en compromettre le fonctionnement. Label Marking: The Term 'IC:' before the radio certification only signifies that Industry Canada technical specifications were met. Marking and European Economic Area
(EEA) The use of 2.4GHz RLANs, for use through the EEA, have the following restrictions:
Maximum radiated transmit power of 100mW EIRP in the frequency range 2.400 -2.4835 GHz. Bluetooth Wireless Technology for use through the EEA has the following restrictions:
Maximum radiated transmit power of 100mW EIRP in the frequency range 2.400 -2.4835 GHz. RFID devices for use through the EEA have the following restrictions:
Maximum radiated transmit power of 2W ERP in the frequency range 865.6-867.6MHz. The use of RFID Devices has varying restrictions for use within the EEA;
please refer to the Zebra Declaration of Conformity (DoC) for details at http://www.zebra.com/doc. Statement of Compliance Zebra hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC and 2011/65/EU. A Declaration of Conformity may be obtained from http://
www.zebra.com/doc. Waste Electrical and Electronic Equipment (WEEE) English: For EU Customers: All products at the end of their life must be returned to Symbol for recycling. For information on how to return product, please go to: http://www.zebra.com/weee. Franais: Clients de l'Union Europenne : Tous les produits en fin de cycle de vie doivent tre retourns Symbol pour recyclage. Pour de plus amples informations sur le retour de produits, consultez : http://www.zebra.com/weee. Espaol: Para clientes en la Unin Europea: todos los productos debern entregarse a Symbol al final de su ciclo de vida para que sean reciclados. Si desea ms informacin sobre cmo devolver un producto, visite: http://www.zebra.com/weee. Deutsch: Fr Kunden innerhalb der EU: Alle Produkte mssen am Ende ihrer Lebensdauer zum Recycling an Symbol zurckgesandt werden. Informationen zur Rcksendung von Produkten finden Sie unter http://www.zebra.com/weee. Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono essere restituiti a Symbol al fine di consentirne il riciclaggio. Per informazioni sulle modalit di restituzione, visitare il seguente sito Web: http://www.zebra.com/
weee. Portugus: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos Symbol para reciclagem. Para obter informaes sobre como devolver o produto, visite:
http://www.zebra.com/weee. Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar Symbol te worden teruggezonden voor recycling. Raadpleeg http://www.zebra.com/weee voor meer informatie over het terugzenden van producten. Polski:
Symbol
etina: Pro zkaznky z EU: Vechny produkty je nutn po skonen jejich ivotnosti vrtit spolenosti Symbol k recyklaci. Informace o zpsobu vrcen produktu najdete na webov strnce:
http://www.zebra.com/weee. Eesti: EL klientidele: kik tooted tuleb nende eluea lppedes tagastada taaskasutamise eesmrgil Symbol'ile. Lisainformatsiooni Review Copy CMM Disclosure
(Parts)
(Pb)
(Hg)
(Cd)
(Cr(VI))
(Metal Parts)
(Circuit Modules)
(Cables and Cable Assemblies)
(Plastic and Polymeric Parts)
(Optics and Optical Components)
(Batteries) O X O O O O O O O O O O O O O O O O O O O O O O
(PBB)
(PBDE) O O O O O O O O O O O O
This table was created to comply with China RoHS requirements. saamiseks toote tagastamise kohta klastage palun aadressi: http://
www.zebra.com/weee. Magyar: Az EU-ban vsrlknak: Minden tnkrement termket a Symbol vllalathoz kell eljuttatni jrahasznosts cljbl. A termk visszajuttatsnak mdjval kapcsolatos tudnivalkrt ltogasson el a http://www.zebra.com/weee weboldalra. Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku ivljenjske dobe vrniti podjetju Symbol za reciklao. Za informacije o vrailu izdelka obiite: http://www.zebra.com/weee. Svenska: Fr kunder inom EU: Alla produkter som uppntt sin livslngd mste returneras till Symbol fr tervinning. Information om hur du returnerar produkten finns p http://www.zebra.com/weee. Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrtettvksi Symbol-yhtin, kun tuotetta ei en kytet. Listietoja tuotteen palauttamisesta on osoitteessa http://
www.zebra.com/weee. Dansk: Til kunder i EU: Alle produkter skal returneres til Symbol til recirkulering, nr de er udtjent. Ls oplysningerne om returnering af produkter p: http://www.zebra.com/weee.
: ..: ,
, Symbol
.
, http://
www.zebra.com/weee . Malti: Gal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aar tal-
ajja ta' l-uu taghom, iridu jiu rritornati gand Symbol gar-
riikla. Gal aktar tagrif dwar kif gandek tirritorna l-prodott, jekk jogbok ur: http://www.zebra.com/weee. Slovenina: Pre zkaznkov z krajn EU: Vetky vrobky musia by po uplynut doby ich ivotnosti vrten spolonosti Symbol na recyklciu. Bliie informcie o vrten vrobkov njdete na: http://
www.zebra.com/weee. Lietuvi: ES vartotojams: visi gaminiai, pasibaigus j eksploatacijos laikui, turi bti grinti utilizuoti kompanij Symbol. Daugiau informacijos, kaip grinti gamin, rasite: http://
www.zebra.com/weee. Latvieu: ES klientiem: visi produkti pc to kalpoanas ma beigm ir jnogd atpaka Symbol otrreizjai prstrdei. Lai iegtu informciju par produktu nogdanu Symbol, ldzu, skatiet: http://
www.zebra.com/weee. Trke: AB Mterileri iin: Kullanm sresi dolan tm rnler geri dntrme iin Symbol'ya iade edilmelidir. rnlerin nasl iade edilecei hakknda bilgi iin ltfen u adresi ziyaret edin: http://
www.zebra.com/weee. TURKISH WEEE Statement of Compliance EEE Ynetmeliine Uygundur Complies with EEE. Japan (VCCI) - Voluntary Control Council for Interference Class B
This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual. Korea Warning Statement for Class B ITE
. Other Countries Australia Use of 5 GHz RLANs in Australia is restricted in the following band 5.60 -
5.65 GHz. Brazil (UNWANTED EMISSIONS - ALL PRODUCTS) Regulatory declarations for TC8000 - BRAZIL For more information consult the website www.anatel.gov.br Declaraes Regulamentares para TC8000 - Brazil Nota: A marca de certificao se aplica ao Transceptor, modelo TC8000. Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Para maiores informaes sobre ANATEL consulte o site:
www.anatel.gov.br Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Este produto est homologado pela Anatel, de acordo com os procedimentos regulamentados pela Resoluo n242/2000 e atende aos requisitos tcnicos aplicados, incluindo os limites de exposio da Taxa de Absoro Especfica referente a campos eltricos, magnticos e eletromagnticos de radiofrequncia, de acordo com as Resolues n 303/2002 e 533/2009. Este dispositivo est em conformidade com as diretrizes de exposio radiofrequncia quando posicionado pelo menos X centmetros de distncia do corpo. Para maiores informaes, consulte o site da Anatel. Chile Este equipo cumple con la Resolucin No 403 de 2008, de la Subsecretaria de telecomunicaciones, relativa a radiaciones electromagnticas. This device complies with the Resolution Not 403 of 2008, of the Undersecretary of telecommunications, relating to electromagnetic radiation. China Hong Kong In accordance with HKTA1039, the band 5.15GHz - 5.35GHz is for indoor operation only. Mexico Restrict Frequency Range to: 2.450 - 2.4835 GHz. La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. South Korea For a radio equipment using 2400 - 2483.5 MHz or 5725 - 5825 MHz, the following two expression should be displayed:
Taiwan
.
Ukraine 1057, 2008
. Thailand Software Support Symbol wants to ensure that customers have the latest release of entitled software at the time of product purchase. To confirm that your Symbol Solutions device shipped with the latest release of entitled software, visit: www.zebra.com/support. Check for the latest software from Software Downloads > Product Line/Product > Go. If your device does not have the latest entitled software release as of your product purchase date, please e-mail a request to:
entitlementservices@zebra.com. You must include the following essential device information with your request:
Model number Serial number Proof of purchase Title of the software download you are requesting. If it is determined by Symbol that your device is entitled to the latest software release, you will receive an e-mail containing a link directing you to a Symbol Web site to download the appropriate software. Symbol Technologies LLC End User License Agreement BY INSTALLING AND/OR USING THIS PRODUCT, YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT AND AGREE TO BE BOUND ITS TERMS. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, SYMBOL TECHNOLOGIES IS NOT WILLING TO LICENSE THE PRODUCT TO YOU, AND YOU MUST NOT USE OR INSTALL THIS PRODUCT. Grant of License. Symbol Technologies grants you (Licensee or you) a personal, nonexclusive, nontransferable, nonassignable, no cost license to use the software and documentation (Product(s)) subject to the terms and conditions of this Agreement. You shall use the Products only for your internal business purposes, exclusively to support Symbol Technologies devices. Any use of the Products outside of the conditions set forth herein is strictly prohibited and will be deemed a breach of this Agreement resulting in immediate termination of your License. In the event of a breach of this Agreement, Symbol Technologies will be entitled to all available remedies at law or in equity (including immediate injunctive relief and repossession of all Products unless Licensee is a Federal agency of the United States Government). You shall not distribute, sublicense, rent, loan, lease, export, re-export, resell, ship or divert or cause to be exported, re-exported, resold, shipped or diverted, directly or indirectly, the Products under this Agreement. You shall not, and shall not permit others to: (i) modify, translate, decompile, bootleg, reverse engineer, disassemble, or extract the inner workings of the Products, (ii) copy the look-and-feel or functionality of the Products; (iii) remove any proprietary notices, marks, labels, or logos from the Products; (iv) rent or transfer all or some of the Products to any other party without Symbol Technologies' prior written consent; or (v) utilize any computer software or hardware which is designed to defeat any copy protection device, should the Products be equipped with such a protection device. Title to all copies of Products will not pass to Licensee at any time and remains vested exclusively in Symbol Technologies. All intellectual property developed, originated, or prepared by Symbol Technologies in connection with the Products remain vested exclusively in Symbol Technologies, and this Agreement does not grant to Licensee any intellectual property rights. Portions of the Products are protected by United States patent and copyright laws, international treaty provisions, and other applicable laws. Therefore, you must treat the Products like any other copyrighted material (e.g., a book or musical recording) except that you may make one copy of the Product solely for back-up purposes. Unauthorized duplication of the Products constitutes copyright infringement, and in the United States is punishable in federal court by fine and imprisonment. Disclaimer. SYMBOL TECHNOLOGIES MAKES, AND YOU RECEIVE, NO WARRANTIES OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR IN ANY COMMUNICATION WITH YOU. SYMBOL TECHNOLOGIES SPECIFICALLY DISCLAIMS ANY WARRANTY INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILTY, NONINFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE. THE PRODUCTS ARE PROVIDED AS IS. SYMBOL TECHNOLOGIES DOES NOT WARRANT THAT THE PRODUCTS WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THE PRODUCTS WILL BE UNINTERRUPTED OR ERROR FREE, OR THAT DEFECTS IN THE PRODUCTS WILL BE CORRECTED. SYMBOL TECHNOLOGIES MAKES NO WARRANTY WITH RESPECT TO THE CORRECTNESS, ACCURACY, OR RELIABILITY OF THE PRODUCTS. Some jurisdictions do not allow the exclusion of implied warranties, so the above exclusion may not apply to you. Limitation of Liability. THE TOTAL LIABILITY OF SYMBOL TECHNOLOGIES UNDER THIS AGREEMENT FOR DAMAGES SHALL NOT EXCEED THE FAIR MARKET VALUE OF THE PRODUCTS LICENSED UNDER THIS AGREEMENT. IN NO EVENT WILL SYMBOL TECHNOLOGIES BE LIABLE IN ANY WAY FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES OF ANY NATURE, INCLUDING WITHOUT LIMITATION, LOST BUSINESS PROFITS, OR LIABILITY OR INJURY TO THIRD PERSONS, WHETHER FORESEEABLE OR NOT, REGARDLESS OF WHETHER SYMBOL TECHNOLOGIES HAS BEEN ADVISED OF THE POSSIBLITY OF SUCH DAMAGES. Some jurisdictions do not permit limitations of liability for incidental or consequential damages, so the above exclusions may not apply to you. This Limitation of Liability provision survives the termination of this Agreement and applies notwithstanding any contrary provision in this Agreement. Licensee must bring any action under this Agreement within one (1) year after the cause of action arises. Maintenance. Unless provided for in a separate agreement, Symbol Technologies shall not be responsible for maintenance or field service of the Products. High Risk Activities. The Products are not fault-tolerant and are not designed, manufactured or intended for use or resale as on-line control software in hazardous environments requiring fail-safe performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, direct life support machines, or weapons systems, in which the failure of the Products could lead directly to death, personal injury, or severe physical or environmental damage (High Risk Activities). Symbol Technologies and its suppliers specifically disclaim any express or implied warranty of fitness for High Risk Activities, and if you elect to use the Products in any High Risk Activities, you agree to indemnify, defend, and hold Symbol Technologies harmless from and against any and all costs, damages, and losses related to that use. U.S. Government. If you are acquiring the Products on behalf of any unit or agency of the U.S. Government, the following shall apply. Use, duplication, or disclosure of the Products is subject to the restrictions set forth in subparagraphs (c) (1) and (2) of the Commercial Computer Software - Restricted Rights clause at FAR 52.227-19 (JUNE 1987), if applicable, unless being provided to the Department of Defense. If being provided to the Department of Defense, use, duplication, or disclosure of the Products is subject to the restricted rights set forth in subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 (OCT 1988), if applicable. Products may or may not include a Restricted Rights notice, or other notice referring specifically to the terms and conditions of this Agreement. The terms and conditions of this Agreement shall each continue to apply, but only to the extent that such terms and conditions are not inconsistent with the rights provided to you under the aforementioned provisions of the FAR and DFARS, as applicable to the particular procuring agency and procurement transaction. Governing Law. This Agreement shall be governed by the laws of the United States of America to the extent that they apply and otherwise by the laws of the State of New York without regard to its conflict of laws provisions. Compliance with Laws. Licensee will comply with all applicable laws and regulations, including export laws and regulations of the United States. Licensee will not, without the prior authorization of Symbol Technologies and the appropriate governmental authority of the United States, in any form export or re-export, sell or resell, ship or reship, or divert, through direct or indirect means, any item or technical data or direct or indirect products sold or otherwise furnished to any person within any territory for which the United States Government or any of its agencies at the time of the action, requires an export license or other governmental approval. Violation of this provision will be a material breach of this Agreement, permitting immediate termination by Symbol Technologies. Third Party Software. The Products may contain one or more items of Third-Party Software. The terms of this Agreement govern your use of any Third-Party Software UNLESS A SEPARATE THIRD-PARTY SOFTWARE LICENSE IS INCLUDED, IN WHICH CASE YOUR USE OF THE THIRD-PARTY SOFTWARE WILL THEN BE GOVERNED BY THE SEPARATE THIRD-PARTY LICENSE. Open Source Software. The Products may contain one or more items of Open Source Software. Open Source Software is software covered by a publicly available license governed solely under Copyright law, whereas the complete terms and obligations of such license attach to a licensee solely through the act of copying, using and/or distribution of the licensed software, such obligations often include one or more of attribution obligations, distribution obligations, copyleft obligations, and intellectual property encumbrances. The use of any Open Source Software is subject to the terms and conditions of this Agreement as well as the terms and conditions of the corresponding license of each Open Source Software package. If there is a conflict between the terms and conditions of this Agreement and the terms and conditions of the Open Source Software license, the applicable Open Source Software license will take precedence. Copies of the licenses for the included Open Source Software, if any, as well as their attributions, acknowledgments, and software information details, are provided in the electronic copy of this Agreement, which is available in the Legal Notices or README file associated with the Product. Symbol Technologies is required to reproduce the software licenses, acknowledgments and copyright notices as provided by the authors and owners, thus, all such information is provided in its native language form, without modification or translation. Depending on the license terms of the specific Open Source Software, source code may not be provided. Please reference and review the entire Open Source Software information to identify which Open Source Software packages have source code provided or available. For instructions on how to obtain a copy of any source code made publicly available by Symbol Technologies related to Open Source Software distributed by Symbol Technologies, you may send your request
(including the Symbol Technologies Product name and version, along with the Open Source Software specifics) in writing to: Symbol Technologies LLC, Open Source Software Management, One Zebra Plaza Holtsville, NY USA. To view additional information regarding licenses, acknowledgments and required copyright notices for open source packages used in this Symbol Technologies product, touch Settings > About device > Legal information > Open source licenses. Review Copy
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2015-11-16 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
2 | 2412 ~ 2462 | DTS - Digital Transmission System | ||
3 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2015-11-16
|
||||
1 2 3 | Applicant's complete, legal business name |
Zebra Technologies Corporation
|
||||
1 2 3 | FCC Registration Number (FRN) |
0015642663
|
||||
1 2 3 | Physical Address |
1 Zebra Plaza
|
||||
1 2 3 |
Holtsville, New York 11742
|
|||||
1 2 3 |
United States
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 2 3 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
UZ7
|
||||
1 2 3 | Equipment Product Code |
TC80N0
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
L****** Z******
|
||||
1 2 3 | Title |
Regulatory Specialist
|
||||
1 2 3 | Telephone Number |
346-2********
|
||||
1 2 3 | Fax Number |
631-6********
|
||||
1 2 3 |
L******@zebra.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 05/12/2016 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 2 3 | DTS - Digital Transmission System | |||||
1 2 3 | NII - Unlicensed National Information Infrastructure TX | |||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Mobile Computer | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Original Equipment | ||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | Power listed is conducted. | ||||
1 2 3 | Power listed is conducted. SAR compliance for body-worn operating configurations is limited to the specific body-worn accessories, such as belt-clips and holsters tested for this filing, and to accessory that contains no metal and that positions this device a minimum of 1.8-cm from the users body. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter. The highest reported SAR value is 0.51 W/kg. | |||||
1 2 3 | Power listed is conducted. SAR compliance for body-worn operating configurations is limited to the specific body-worn accessories, such as belt-clips and holsters tested for this filing, and to accessory that contains no metal and that positions this device a minimum of 1.8-cm from the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter. The highest reported SAR value is 1.41 W/kg. This device has 20 MHz and 40 MHz bandwidth modes. | |||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
Sporton International Inc.
|
||||
1 2 3 | Name |
A******** C******
|
||||
1 2 3 | Telephone Number |
886-3******** Extension:
|
||||
1 2 3 | Fax Number |
886-3********
|
||||
1 2 3 |
a******@sporton.com.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0026000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402 | 2480 | 0.0019 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15C | CC | 2412 | 2462 | 0.2512 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15E | 38 CC | 5180 | 5240 | 0.0465 | |||||||||||||||||||||||||||||||||||
3 | 2 | 15E | 38 CC | 5260 | 5320 | 0.0933 | |||||||||||||||||||||||||||||||||||
3 | 3 | 15E | 38 CC | 5500 | 5700 | 0.0908 | |||||||||||||||||||||||||||||||||||
3 | 4 | 15E | 38 CC | 5745 | 5825 | 0.0701 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC