FCC ID: UZ7BT000442B Rechargeable Li-Ion Battery

TC53 Touch Computer Quick Start Guide MN-004397-01EN Rev A Copyright ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. 2022 Zebra Technologies Corporation and/or its affiliates. All rights reserved. Information in this document is subject to change without notice. The software described in this document is furnished under a license agreement or nondisclosure agreement. The software may be used or copied only in accordance with the terms of those agreements. For further information regarding legal and proprietary statements, please go to:

SOFTWARE: zebra.com/linkoslegal. COPYRIGHTS: zebra.com/copyright. WARRANTY: zebra.com/warranty. END USER LICENSE AGREEMENT: zebra.com/eula. Terms of Use Proprietary Statement This manual contains proprietary information of Zebra Technologies Corporation and its subsidiaries

(Zebra Technologies). It is intended solely for the information and use of parties operating and maintaining the equipment described herein. Such proprietary information may not be used, reproduced, or disclosed to any other parties for any other purpose without the express, written permission of Zebra Technologies. Product Improvements Continuous improvement of products is a policy of Zebra Technologies. All specifications and designs are subject to change without notice. Liability Disclaimer Zebra Technologies takes steps to ensure that its published Engineering specifications and manuals are correct; however, errors do occur. Zebra Technologies reserves the right to correct any such errors and disclaims liability resulting therefrom. Limitation of Liability In no event shall Zebra Technologies or anyone else involved in the creation, production, or delivery of the accompanying product (including hardware and software) be liable for any damages whatsoever (including, without limitation, consequential damages including loss of business profits, business interruption, or loss of business information) arising out of the use of, the results of use of, or inability to use such product, even if Zebra Technologies has been advised of the possibility of such damages. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. TC53 Touch Computer Quick Start Guide Features This section lists the features of the TC53 touch computer. Figure 1Front and Side Views 2 3 4 5 1 10 9 6 7 Table 1TC53 Front View Number Item 8 Description 1 2 3 4 Front camera 8MP Takes photos and videos. Scan LED Receiver Indicates data capture status. Use for audio playback in Handset mode. Proximity/light sensor Determines proximity and ambient light for controlling display backlight intensity. 3 TC53 Touch Computer Quick Start Guide Table 1TC53 Front View(Continued) Number Item Description 5 Battery status LED Indicates battery charging status while charging and application generated notifications. 6, 9 Scan button Initiates data capture (programmable). 7 8 Volume up/down button 6 in. LCD touch screen 10 PTT button Increase and decrease audio volume (programmable). Displays all information needed to operate the device. Typically used for PTT communications. Where regulatory restrictions exist, button is configurable for use with other applications. Figure 2Back, Top, and Bottom View 1 13 12 11 3 4 5 6 7 2 8 10 9 4 TC53 Touch Computer Quick Start Guide Table 2TC53 Rear View Number Item 1 Power button Turns the display on and off. Press and hold to reset the device, power off or swap battery. Description 2, 5, 9 Microphone Use for noise cancellation. 3 4 6 7 8 10 11 12 13 Headset jack For audio output to headset (TC53 only). Back common 8 pins Provideshost communications, audio and device charging via cables and accessories. Battery release latches Battery Speaker USB Type C and 2 charge pins Hand strap attachment points ToF module 16 MP rear camera with flash Press to remove the battery. Provides power to the device. Provides audio output for video and music playback. Provides audio in speakerphone mode. Provides power to the device using IO USB-C interface with 2 charge pins. Attachment points for the hand strap. Employs time of flight techniques to resolve distance between the camera and subject (premium configurations only). Takes photos and videos with flash to provide illumination for the camera. Installing a microSD Card The microSD card slot provides secondary non-volatile storage. The slot is located under the battery pack. Refer to the documentation provided with the card for more information, and follow the manufacturer's recommendations for use. CAUTIONESD: Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card. Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring the operator is properly grounded. 5 TC53 Touch Computer Quick Start Guide 1. Lift the access door. 2. Slide the microSD card holder to the Open position. 3. Lift the microSD card holder door. 6 TC53 Touch Computer Quick Start Guide 4. Insert the microSD card into the card holder ensuring that the card slides into the holding tabs on each side of the door. 5. Close the microSD card holder door. 6. Slide the microSD card holder door to the Lock position. NOTE: Access door must be replaced and securely seated to ensure proper device sealing. 7 TC53 Touch Computer Quick Start Guide 7. Re-install the access door. Installing the Battery This section describes how to install the battery into the device. NOTE: User modification of the device, particularly in the battery well, such as labels, asset tags, engravings, stickers, etc., may compromise the intended performance of the device or accessories. Performance levels such as sealing (Ingress Protection (IP)), impact performance

(drop and tumble), functionality, temperature resistance, etc. could be effected. DO NOT put any labels, asset tags, engravings, stickers, etc. in the battery well. 1. Insert the battery, bottom first, into the battery compartment in the back of the device. 2. Press the battery down until it snaps into place. Using the Rechargeable Li-Ion Battery with BLE Beacon This device utilizes a rechargeable Li-Ion battery to facilitate BLE Beacon. Once enabled, the battery transmits a BLE signal for up to seven days while the device is powered off due to battery depletion. NOTE: The device transmits a Bluetooth beacon only when the device is powered off or in Airplane Mode. 8 TC53 Touch Computer Quick Start Guide For additional information on configuring the Secondary BLE settings, see techdocs.zebra.com/emdk-for-

android/11/mx/beaconmgr. Charging the Spare Battery This section provides information on charging a spare battery. 1. Insert a spare battery into the spare battery slot. 2. Ensure the battery is seated properly.The Spare Battery Charging LED blinks indicating charging. See Charging Indications for charging indicators. The battery charges from fully depleted to 90% in approximately 2.5 hours and from fully depleted to 100% in approximately 3.5 hours. In many cases the 90% charge provides plenty of charge for daily use. Depending on the usage profile, a full 100% charge lasts for approximately 14 hours of use. To achieve the best charging results use only Zebra charging accessories and batteries. Charging Use one of the following accessories to charge the device and/or spare battery. Charging and Communication Description Part Number Charging Communication Battery

(In device) Spare Battery USB Ethernet 1-Slot USB/Charge Only Cradle Kit CRD-NGTC5-2SC1B Yes Yes No No 1 -Slot USB/Ethernet Cradle Kit CRD-NGTC5-2SE1B 5-Slot Charge Only Cradle with BatteryKit CRD-NGTC5-5SC4B 5-Slot Charge Only Cradle Kit CRD-NGTC5-5SC5D 5-Slot Ethernet Cradle Kit CRD-NGTC5-5SE5D Charge/USB Cable CBL-TC5X-

USBC2A-01 Yes Yes Yes Yes Yes Yes Yes No No No Yes No No No Yes Yes No No Yes No Charging the Device This section provides information for charging the device. NOTE: Ensure that you follow the guidelines for battery safety described in the TC53 Product Reference Guide. 1. To charge the main battery, connect the charging accessory to the appropriate power source. 2. Insert the device into a cradle or attach to a cable. The device turns on and begins charging. The Charging/Notification LED blinks amber while charging, then turns solid green when fully charged. The standard battery charges from fully depleted to 90% in approximately two hours and from fully depleted to 100% in approximately three hours. In many cases the 90% charge provides plenty of charge for daily use.Depending on usage profile, afull 100% charge lasts for approximately 14 hours of use. To 9 TC53 Touch Computer Quick Start Guide achieve the best charging results use only Zebra charging accessories and batteries. Charge batteries at room temperature with the device in sleep mode. Charging Indications The charging/notification LED indicates charging status. Table 3Charging/Notification LED Charging Indicators State LED Indications Off Device is not charging. Device is not inserted correctly in the cradle or connected to a power source. Charger/cradle is not powered. Slow Blinking Amber Device is charging.

(1 blink every 4 seconds) Slow Blinking Red

(1 blink every 4 seconds) Solid Green Device is charging but the battery is at end of useful life. Charging complete. Solid Red Charging complete but the battery is at end of useful life. Fast Blinking Amber

(2 blinks/second) Charging error, e.g.:

Temperature is too low or too high. Charging has gone on too long without completion (typically eight hours). Fast Blinking Red

(2 blinks/second) Charging error but the battery is at end of useful life., e.g.:

Temperature is too low or too high. Charging has gone on too long without completion (typically eight hours). 10 TC53 Touch Computer Quick Start Guide 2-Slot(1 Device/1 Spare Battery)USB Charging Cradle 1 2 3 4 5 Spare battery chargingslot Power LED Device charging slot Power line cord AC line cord 11 TC53 Touch Computer Quick Start Guide 2-Slot(1 Device/1 Spare Battery)Ethernet and Communication Setup 1 2 3 4 6 1 2 3 4 5 6 5 AC line cord Ethernet switch USB port Ethernet port Power supply Host computer 12 TC53 Touch Computer Quick Start Guide 5-Slot Charge Only Cradle 1 2 3 4 Device charging slot Power LED Power line cord AC line cord 13 TC53 Touch Computer Quick Start Guide 5-Slot Ethernet Cradle Setup 1 3 2 1 2 3 Ethernet switch Ethernet port Power supply 14 TC53 Touch Computer Quick Start Guide 5-Slot Charge Only Cradle with Battery Charger 1 2 3 4 5 6 Device charging slot Spare battery chargingslot Spare battery charging LED Power LED Power line cord AC line cord 15 TC53 Touch Computer Quick Start Guide Charge/USB-C Cable Scanning To read a barcode, a scan-enabled application is required. The device contains the DataWedge application that allows the user to enable the imager, decode the barcode data and display the barcode content. 1. Ensure that an application is open on the device and a text field is in focus (text cursor in text field). 2. Point the exit window on the top of the device at a barcode. 3. Press and hold the scan button. The red LED aiming pattern and red aiming dot turns on to assist in aiming. 16 TC53 Touch Computer Quick Start Guide NOTE: When the device is in Picklist mode, the imager does not decode the barcode until the crosshair or aiming dot touches the barcode. 4. Ensure the barcode is within the area formed by the cross-hairs in the aiming pattern. The aiming dot is used for increased visibility in bright lighting conditions. Figure 3Aiming Pattern Figure 4Pick List Mode with Multiple Barcodes in Aiming Pattern 5. The Data Capture LED lights green and a beep sounds, by default, to indicate the barcode was decoded successfully. 6. Release the scan button. NOTE: Imager decoding usually occurs instantaneously. The device repeats the steps required to take a digital picture (image) of a poor or difficult barcode as long as the scan button remains pressed. 7. The barcode content data displays in the text field. 17 TC53 Touch Computer Quick Start Guide Ergonomic Considerations 18 www.zebra.com

Rechargeable Li-Ion Battery Regulatory Guide MN-004411-01EN-P March 4, 2022 Zebra Technologies |

3 Overlook Point |

Lincolnshire, IL 60069 USA zebra.com ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. 2022 Zebra Technologies Corp. and/or its affiliates. All rights reserved. Regulatory Information This device is approved under Zebra Technologies Corporation. This guide applies to the following model number: BT-000442B All Zebra devices are designed to be compliant with the rules and regulations in the locations they are sold and will be labeled as required. Local language translation / Traduo do idioma local / bersetzung in die lokale Sprache / Raduccion de idioma local /

Traduction en langue locale / Prijevod na lokalni jezik / Traduzione in lingua locale /

/ Yerel dil eviri /Tumaczenie na jzyk lokalny: zebra.com/support Any changes or modifications to Zebra equipment not expressly approved by Zebra could void the users authority to operate the equipment. Declared maximum operating temperature:

50C For use only with Zebra approved and UL Listed mobile devices, Zebra approved, and UL Listed/Recognized battery packs. Bluetooth Wireless Technology This is an approved Bluetooth product. For more information on the Bluetooth SIG listing, please visit bluetooth.com. Regulatory Markings Regulatory markings subject to certification are applied to the device signifying the radio(s) is/are approved for use. Refer to the Declaration of Conformity (DoC) for details of other country markings. The DOC is available at: zebra.com/doc. Safety in Hospitals and Aircraft NOTE: Wireless devices transmit radio frequency energy that may affect medical electrical equipment and aircrafts operation. Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics, healthcare facilities or by airline staff. These requests are designed to prevent possible interference with sensitive equipments. RF Exposure Guidelines Safety Information Reducing RF Exposure Use Properly Only operate the device in accordance with the instructions supplied. The device complies with internationally recognized standards covering human exposure to electromagnetic fields. For information on international human exposure to electromagnetic fields, refer to the Zebra Declaration of Conformity (DoC) at zebra.com/doc. For further information on the safety of RF energy from wireless devices, refer to RF exposure and assessment standards section at zebra.com/responsibility. Batteries and Power Packs This information applies to Zebra-approved batteries and power packs containing batteries. Battery Information CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of batteries according to instructions. Use only Zebra approved batteries. Accessories which have battery charging capability are approved for use with the following battery models:

Model BT-000442B (3.85 VDC, 4680 mAh) Zebra approved rechargeable battery packs are designed and constructed to the highest standards within the industry. However, there are limitations as to how long a battery can operate or be stored before needing replacement. Many factors affect the actual life cycle of a battery pack such as heat, cold, harsh environmental conditions, and severe drops. When batteries are stored over six months, some irreversible deterioration in overall battery quality may occur. Store batteries at half charge in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of metallic parts, and electrolyte leakage. When storing batteries for one year or longer, the charge level should be verified at least once a year and charged to half charge. Replace the battery when a significant loss of run time is detected. Standard warranty period for all Zebra batteries is one year, regardless if the battery was purchased separately or included as part of the host device. For more information on Zebra batteries, please visit:

zebra.com/batterydocumentation and select the Battery Best Practices link. Battery Safety Guidelines IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS WARNING When using this product basic safety precautions should always be followed, including the following:

The area in which the units are charged should be clear of debris and combustible materials or chemicals. Particular care should be taken where the device is charged in a non-commercial environment. Read all the instructions before using the product. Follow battery usage, storage, and charging guidelines found in the user's guide. Improper battery use may result in a fire, explosion, or other hazard. To charge the mobile device battery, the battery and charger temperatures must be between 0C and +40C (+32F and +104F). Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present a risk of fire, explosion, leakage, or other hazard. If you have any questions about the compatibility of a battery or a charger, contact Zebra support. Do not disassemble or open, crush, bend or deform, puncture, or shred. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury. Severe impact from dropping any battery-operated device on a hard surface could cause the battery to overheat. Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals. Do not modify, disassemble, or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water, rain, snow or other liquids, or expose to fire, explosion, or other hazard. Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle or near a radiator or other heat source. Do not place battery into a microwave oven or dryer. To reduce the risk of injury, close supervision is necessary when used near children. Please follow local regulations to promptly dispose of used re-chargeable batteries. Do not dispose of batteries in fire. Exposure to temperatures over 100C (212F) may cause explosion. Seek medical advice immediately if a battery has been swallowed. In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with large amounts of water and seek medical advice. If you suspect damage to your equipment or battery, contact Zebra support to arrange for inspection. Marking and European Economic Area (EEA) Statement of Compliance Zebra hereby declares that this radio equipment is in compliance with Directives 2014/53/EU and 2011/65/EU. Any radio operation limitations within EEA countries are identified in Appendix A of EU Declaration of Conformity. The full text of the EU Declaration of Conformity is available at:

zebra.com/doc. EU Importer: Zebra Technologies B.V Address: Mercurius 12, 8448 GX Heerenveen, Netherlands United Kingdom Statement of Compliance Zebra hereby declares that this radio equipment is in compliance with the Radio Equipment Regulations 2017 and the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. Any radio operation limitations within UK are identified in Appendix A of UK Declaration of Conformity. The full text of the UK Declaration of Conformity is available at: zebra.com/doc. UK Importer: Zebra Technologies Europe Limited Address: Dukes Meadow, Millboard Rd, Bourne End, Buckinghamshire, SL8 5XF Warranty For the complete Zebra hardware product warranty statement, go to: zebra.com\warranty. Service Information Before you use the unit, it must be configured to operate in your facility's network and run your applications. If you have a problem running your unit or using your equipment, contact your facility's Technical or System Support. If there is a problem with the equipment, they will contact Zebra support at zebra.com\support. For the latest version of the guide go to:

zebra.com\support. Additional Information For information on using the BT-000442B, refer to the TC5X/TC7X product guide available at:

zebra.com/support. Waste Electrical and Electronic Equipment (WEEE) For EU and UK Customers: For products at the end of their life, please refer to recycling/disposal advice at: zebra.com/weee. United States and Canada Regulatory Radio Frequency Interference Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Radio Frequency Interference Requirements Canada Innovation, Science and Economic Development Canada ICES-003 Compliance Label: CAN ICES-3

(B)/NMB-3(B) This device complies with Innovation, Science and Economic Development Canadas licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radio lectrique subi mme si le brouillage est susceptible d'en compromettre le fonctionnement. RF Exposure Requirements - FCC and ISED The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated in compliance with the FCC RF emission guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of fcc.gov/oet/ea/fccid. zebra.com/support

9 13

(EPA) 15 O X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O SJ/T 11364 O:

GB/T 26572 X:

GB/T 26572 (

(EAC) EAC. Mxico La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. BT-000442B Unit O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O 1. 0.1 wt % 0.01 wt %

2. O 3. Note 1: Exceeding 0.1 wt% and exceeding 0.01 wt% indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. Note 2: O indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. Note 3: The indicates that the restricted substance corresponds to the exemption. TRK WEEE Uyumluluk Beyan EEE Ynetmeliine Uygundur.

Han

*X*43.5+/-0.15mm

() Nv ZEBRA HOLTSVILLE, NY 11742 BESLURAT ZEBRA TECHNOLOGIES CORP. Model (2-3/3): BT-000442B 11CP6/55/83

=k FE A/F Th LION BATTERY PoworPrecisions RECHARGEABLE (3.85V) FOR USEINTCSXITC7X SERIES Fe 6B BR le MIN. 38/2858 2 600mAh 17.71Wh TYP.: 4680mAh 18.01Wh Fil iii /*h false S At Cell Origin: China Finished in: China Order Replacement: BTRY-NGTC5TC7-44MABLE-01 Factory: WS TECHNOLOGY(GUANGZHOU) LIMITED or Gispose offre. CAUTION Fiske em soni tty placed byanincorestpe. E Diposeousedbatees acorn isto OR TE Peaeaisetaecieagaae TAP LAERLRS PG xX Cots &

T-0004428 1-8 0004428 eaG

. S; a

*X*66.6+/-0.2mm 39706

(O) ITE, ACCESSORY PJN:BT-000442-002B hd THE1011dT1E101 E101 T0001 fives v XREVY Background Red per Pantone Red032C

Regulatory Engineering Date: May 25, 2022 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: FCC ID: UZ7BT000442B AUTHORIZATION LETTER We, the undersigned, hereby authorize Eric Huang in Sporton International Inc. to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Eric Huang in Sporton International Inc. on our behalf shall have the same effect as acts of our own. If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Confidentiality Request Pursuant to the provisions of Sections 0.457 and 0.459 of Commissions rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Part List Operational Description Tune-up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission s policy, in order to comply with the marketing regulations in 47 CFT 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant shot-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. Zebra Technologies Corporation 1 Z e b r a P l a z a , | H o l t s v i l l e , N Y 1 1 7 4 2 | 1 . 6 3 1 . 7 3 8 . 2 4 0 0 p h o n e | 1 . 6 3 1 . 6 2 7 . 7 1 7 9 f a x | w w w . z e b r a . c o m Regulatory Engineering Internal Photos External Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. If you have any questions regarding this authorization, please contact me directly. Signature

_______________________________ Name and Job Title. E-mail Tel.

: Larry (Qianlin) Zhou / Regulatory Specialist

: larry.zhou@zebra.com

: 346-260-3543 Zebra Technologies Corporation 1 Z e b r a P l a z a , | H o l t s v i l l e , N Y 1 1 7 4 2 | 1 . 6 3 1 . 7 3 8 . 2 4 0 0 p h o n e | 1 . 6 3 1 . 6 2 7 . 7 1 7 9 f a x | w w w . z e b r a . c o m