CS6080 Scanner Quick Start Guide Draft v16 2 CS6080 Scanner Copyright ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. 2020 Zebra Technologies Corporation and/or its affiliates. All rights reserved. COPYRIGHTS & TRADEMARKS: For complete copyright and trademark information, go to www.zebra.com/copyright. WARRANTY: For complete warranty information, go to www.zebra.com/warranty. END USER LICENSE AGREEMENT: For complete EULA information, go to www.zebra.com/eula. Terms of Use Proprietary Statement This manual contains proprietary information of Zebra Technologies Corporation and its subsidiaries (Zebra Technologies). It is intended solely for the information and use of parties operating and maintaining the equipment described herein. Such proprietary information may not be used, reproduced, or disclosed to any other parties for any other purpose without the express, written permission of Zebra Technologies. Product Improvements Continuous improvement of products is a policy of Zebra Technologies. All specifications and designs are subject to change without notice. Liability Disclaimer Zebra Technologies takes steps to ensure that its published Engineering specifications and manuals are correct;
however, errors do occur. Zebra Technologies reserves the right to correct any such errors and disclaims liability resulting therefrom. In no event shall Zebra Technologies or anyone else involved in the creation, production, or delivery of the accompanying product (including hardware and software) be liable for any damages whatsoever (including, without limitation, consequential damages including loss of business profits, business interruption, or loss of business information) arising out of the use of, the results of use of, or inability to use such product, even if Zebra Technologies has been advised of the possibility of such damages. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Limitation of Liability Draft v16 Quick Start Guide 3 Introduction The CS6080 is a cordless barcode scanner in a brick shape that serves the retail market as a point of sale scanner as well as the healthcare market as a companion scanner. The CS6080 features include inductive touch user buttons, Qi standard wireless charging, BT 5.0 class1/class2, NFC reader/tag emulation capability, and NFC tap to pair for Android and Windows devices. The battery is removable and the scanner has the capability to operate from a USB cable that plugs into the battery compartment, allowing for corded handsfree mode at a point of sale. The CS6080 Scanner captures and stores barcodes for a variety of uses, and transmits barcode data to a host via USB connection or Bluetooth. This document provides basic instructions for setting up, programming, and using CS6080 scanners. The scanner is available in the following configurations:
CS6080SR - Standard range, cordless CS6080HC - Healthcare, cordless Bluetooth Bluetooth Each scanner can be connected to a USB host cable. Cradles are also available for mounting, charging, and host connection. Draft v16 4 CS6080 Scanner Features Battery Programmable Button Scan Button Beeper LED Indicators Scanner Window Draft v16 Quick Start Guide 5 Charging Inserting the Battery 1. Insert the battery into the scanner. 2. Press the battery into the scanner until the battery snaps into place. Removing the Battery To remove the battery, press the release and pull the battery away from the scanner. Draft v16 6 CS6080 Scanner Powering via USB Accessory 1. Remove the battery, if not already 2. removed. Insert the USB accessory into the scanner. 3. Connect the other end of the USB accessory to a USB port on the host PC, or to a USB power adapter plugged into an AC outlet. Draft v16 Quick Start Guide 7 Charging via Cradle 1. Connect the cradle to one end of a USB-C cable. 2. Connect the other end of the USB-C cable to a USB port on the host PC, or to a USB power adapter plugged into an AC outlet. Insert the CS6080 into a scanner slot to begin charging. 3. Retail Healthcare The CS6080 begins charging. The charge status LEDs light to indicate progress. Refer to the CS6080 Scanner Product Reference Guide for information on accessories. Cradle Cable Connection Draft v16 8 CS6080 Scanner Charging via Charging Pad 1. Follow the third party instructions for connecting your charging pad to power. 2. Place the scanner on the charging pad with the buttons facing up. The battery charging indicator LED on the scanner lights to show the charging status. Note The CS6080 is only compatible with Qi type charging pads. Draft v16 Quick Start Guide 9 Charging Spare Batteries 1. Connect the retail charging cradle to one end of a USB-C cable. 2. Connect the other end of the USB-C cable to a USB port on the host PC, or to a USB power adapter plugged into an AC outlet. 3. Remove the spare battery slot cap. 4. Insert the battery into the spare battery slot to begin charging. The charge LED on the cradle lights to show the charging status. LED Charging Status Draft v16 10 CS6080 Scanner Connecting to a Host USB Scan ONE of the barcodes below. The interface cable automatically detects the host interface type and uses the default setting. If the default (*) does not meet your requirements, scan another host barcode below.
*USB Keyboard HID IBM Hand-Held USB Draft v16 Quick Start Guide 11
(IBM Hand-Held USB with Full Scan IBM OPOS Disable) SNAPI with Imaging Bluetooth Connection Bluetooth Communication Options To set up the scanner for communication with a host using a standard Bluetooth profile, scan one of the following barcodes. Cradle Bluetooth Classic (default) -
The scanner must be paired to a cradle and the cradle communicates to the host via the host interface cable connection. Classic and BLE modes are supported. HID Keyboard Profile - The scanner connects to the PC/host via Bluetooth and performs like a Bluetooth keyboard. HID supports slave connections. Classic and BLE modes are supported. Simple Serial Interface (SSI)- For communication when connecting to a Zebra mobile device or PC/tablet/phone running a Zebra scanner SDK app. Classic, BLE and MFi modes are supported. Serial Port Profile (SPP) - The scanner connects to the PC/host via Bluetooth and performs like there is a serial connection. Classic Bluetooth only. Draft v16 12 CS6080 Scanner Cradle Bluetooth Classic Cradle Bluetooth Low Energy HID Bluetooth Classic HID Bluetooth Low Energy (Discoverable) SSI BT Classic (Non-Discoverable) SSI BT Classic (Discoverable) Draft v16 Quick Start Guide 13 SSI BT LE SSI BT with MFi (iOS Support) SPP BT Classic (Non-Discoverable) SPP BT Classic (Discoverable) Draft v16 14 CS6080 Scanner Scanning To scan a bar code:
1. Aim the scanner at the bar code. 2. Press the Scan button (...). 3. Ensure the aiming dot is centered on the barcode. The scanner beeps and the LED turns green to indicate a successful decode. See Troubleshooting for beeper and LED definitions. Draft v16 Quick Start Guide 15 Useful Barcodes Set Defaults Return to Factory Defaults Add a Tab Key To add a Tab key after scanned data, scan the barcode below. Add a Tab Key Add an Enter Key To add an Enter key after scanned data, scan the barcode below. Add Enter Key (Carriage Return/Line Feed) USB Caps Lock Override USB-Override Caps Lock Key
(Enable) Draft v16 16 CS6080 Scanner
*USB-Do Not Override Caps Lock Key
(Disable) Night Mode with Vibrate Enable Night Mode Trigger Disable Night Mode Trigger Toggle Night Mode Draft v16 Quick Start Guide 17 Button Actions Action Description Scan Button (...) Single press Trigger Double press Issue connection to last known address if disconnected/if connected in HID mode to an Apple device, will send show/hide keypad Hold for 3 seconds Battery status Night mode Hold until beam goes off plus 5 seconds longer Minus Button (-) Single press (not in cradle) default*
Show/hide keypad Single press option 2 Programmable trigger Single press option 3 Toggle lamp mode
(SR) Single press in cradle Toggle lamp mode Double press Disconnect Draft v16 18 CS6080 Scanner LED Indicators Action LED Decode Indicator LED Successful decode Green Unsuccessful decode Red Battery Indicator LED When in cradle and charging is complere Solid Green When in cradle and charging is in progress Blinking Amber Blinking Red Solid Green Solid Amber Blinking Red When in cradle and there is a charging error When used in handheld mode and the Scan button (...) is pressed for 3 seconds
- Full Battery When used in handheld mode and the Scan button (...) is pressed for 3 seconds
- Mid Charge When used in handheld mode and the Scan button (...) is pressed for 3 seconds
- Low Battery After decode and full battery status After decode and mid charge status After decode and low charge status Red blinks every decode Green does not display Amber blinks once when passing through mid threshold Draft v16 Quick Start Guide 19 Action LED Bluetooth Indicator LED While actively pairing Blinking Blue Connected Solid Blue Bluetooth Error Steady Red for 2 seconds 123Scan 123Scan is an easy-to-use, PC-based software tool that enables rapid and easy customized setup of a scanner via a barcode or USB cable. For more information, visit:
www.zebra.com/123Scan. Utility Functionality Device configuration Electronic programming (USB cable) Programming barcode(s) Data view - scan log (display scanned barcode data) Access asset tracking information Upgrade firmware and view release notes Remote management (SMS package generation). Draft v16 20 CS6080 Scanner Troubleshooting Problem Possible Solutions Imager comes on, but scanner does not decode the bar code. Ensure the scanner is programmed to read the type of bar code being scanned. Ensure the symbol is not defaced. Scan other bar codes of the same bar code type. Move scanner closer to or further from bar code. Charge the battery. See Charging on page 5. Ensure the scanner is connected to a powered USB hub (5V, 500mA max). Scanner is out of range;
move closer to the host and press any button to re-pair with the host. Memory is full; download bar code data to the host and clear the memory. Scanner LED turns solid red for a few seconds. Scanner does not fully charge. Bluetooth LED turns off. Scanner emits long beeps for 5 seconds when scanning a bar code. Draft v16 Quick Start Guide 21 Regulatory Information This device is approved under Zebra Technologies Corporation. This guide applies to the following model number CS6080. All Zebra devices are designed to be compliant with the rules and regulations in thelocations they are sold and will be labeled as required. Local language translation / Traduo do idioma local /
bersetzung in die lokale Sprache / Raduccion de idioma local / Traduction en langue locale / Prijevod na lokalni jezik /
Traduzione in lingua locale / / /
Yerel dil eviri /Tumaczenie na jzyk lokalny :
www.zebra.com/support Any changes or modifications to Zebra equipment not expressly approved by Zebra could void the user's authority to operate the equipment. Declared maximum operating temperature: 50C. CAUTION:
Only use Zebra approved and NRTL-certified accessories, battery packs and battery chargers. Do NOT attempt to charge damp/wet mobile computers, printers or batteries. All components must be dry before connecting to an external power source. Bluetooth Wireless Technology This is an approved Bluetooth product. For more information on the Bluetooth SIG listing, please visit www.bluetooth.com. Regulatory Markings Regulatory markings subject to certification are applied to the device signifying the radio(s) is/are approved for use. Refer to the Declaration of Conformity (DoC) for details of other country markings. The DOC is available at:
www.zebra.com/doc. Health and Safety Recommendations Ergonomic Recommendations In order to avoid or minimize the potential risk of ergonomic injury, always follow good ergonomic workplace practices. Consult with your local Health & Safety Manager to ensure that you are adhering to your company's safety programs to prevent employee injury. Draft v16 22 CS6080 Scanner Safety in Hospitals and Aircraft Wireless devices transmit radio frequency energy that may affect medical electrical equipment and aircrafts operation. Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics, healthcare facilities or by airline staff. These requests are designed to prevent possible interference with sensitive equipments. RF Exposure Guidelines Safety Information Reducing RF Exposure - Use Properly Only operate the device in accordance with the instructions supplied. The device complies with internationally recognized standards covering human exposure to electromagnetic fields. For information on international human exposure to electromagnetic fields, refer to the Zebra Declaration of Conformity (DoC) at www.zebra.com/doc. Use only Zebra tested and approved headset, belt-clips, holsters, and similar accessories to ensure RF exposure compliance. If applicable, follow the instructions for use as detailed in the accessory guide. The use of third-party belt clips, holsters, and similar accessories may not comply with RF exposure compliance requirements and should be avoided. For further information on the safety of RF energy from wireless devices, refer to RF exposure and assessment standards section at: www.zebra.com/responsibility. LED Devices Classified as "EXEMPT RISK GROUP" according to IEC 62471:2006 and EN 62471:2008. Pulse Duration: 17.68 ms (CS6080 with scanner SE4720) Pulse Duration:22.826 ms (CS6080 with scanner SE4100) Marking and European Economic Area (EEA) Statement of Compliance Radio enabled devices: Zebra hereby declares that this equipment is in compliance with Directives 2014/53/EU and 2011/65/EU. Any radio operation limitations within EEA countries are identified in Appendix A of EU Declaration of Conformity. The full text of the EU Declaration of Conformities is available at: www.zebra.com/doc. Draft v16 Quick Start Guide 23 Waste Electrical and Electronic Equipment
(WEEE) For EU Customers: For products at the end of their life, please refer to recycling/disposal advice at:
www.zebra.com/weee. English: For EU Customers: All products at the end of their life must be returned to Zebra for recycling. For information on how to return product, please go to:
http://www.zebra.com/weee.
Zebra .
http://www.zebra.com/weee. etina: Pro zkaznky z EU: Vechny produkty je nutn po skonen jejich ivotnosti vrtit spolenosti Zebra k recyklaci. Informace o zpsobu vrcen produktu najdete na webov strnce: http://www.zebra.com/weee. Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til recirkulering, nr de er udtjent. Ls oplysningerne om returnering af produkter p: http://www.zebra.com/weee. Deutsch: Fr Kunden innerhalb der EU: Alle Produkte mssen am Ende ihrer Lebensdauer zum Recycling an Zebra zurckgesandt werden. Informationen zur Rcksendung von Produkten finden Sie unter http://www.zebra.com/weee. Eesti: EL klientidele: kik tooted tuleb nende eluea lppedes tagastada taaskasutamise eesmrgil Zebra'ile. Lisainformatsiooni saamiseks toote tagastamise kohta klastage palun aadressi: http://www.zebra.com/weee. Espaol: Para clientes en la Unin Europea: todos los productos debern entregarse a Zebra al final de su ciclo de vida para que sean reciclados. Si desea ms informacin sobre cmo devolver un producto, visite:
http://www.zebra.com/weee.
, Zebra .
, http://www.zebra.com/weee . Franais : Clients de l'Union Europenne : Tous les produits en fin de cycle de vie doivent tre retourns Zebra pour recyclage. Pour de plus amples informations sur le retour de produits, consultez : http://www.zebra.com/weee. Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono essere restituiti a Zebra al fine di consentirne il riciclaggio. Per informazioni sulle modalit di restituzione, visitare il seguente sito Web:
http://www.zebra.com/weee. Lietuvi: ES vartotojams: visi gaminiai, pasibaigus j eksploatacijos laikui, turi bti grinti utilizuoti kompanij Zebra. Daugiau informacijos, kaip grinti gamin, rasite:
http://www.zebra.com/weee. Draft v16 24 CS6080 Scanner Latvieu: ES klientiem: visi produkti pc to kalpoanas ma beigm ir jnogd atpaka Zebra otrreizjai prstrdei. Lai iegtu informciju par produktu nogdanu Zebra, ldzu, skatiet: http://www.zebra.com/weee. Magyar: Az EU-ban vsrlknak: Minden tnkrement termket a Zebra vllalathoz kell eljuttatni jrahasznosts cljbl. A termk visszajuttatsnak mdjval kapcsolatos tudnivalkrt ltogasson el a http://www.zebra.com/weee weboldalra. Malti: Gal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aar tal-ajja ta' l-uu taghom, iridu jiu rritornati gand Zebra gar-riikla. Gal aktar tagrif dwar kif gandek tirritorna l-prodott, jekk jogbok ur:
http://www.zebra.com/weee. Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar Zebra te worden teruggezonden voor recycling. Raadpleeg http://www.zebra.com/weee voor meer informatie over het terugzenden van producten. Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji naley zwrci do firmy Zebra w celu ich utylizacji. Informacje na temat zwrotu produktw znajduj si na stronie internetowej http://www.zebra.com/weee. Portugus: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos Zebra para reciclagem. Para obter informaes sobre como devolver o produto, visite:
http://www.zebra.com/weee. Romnesc: Pentru clienii din UE: Toate produsele, la sfritul duratei lor de funcionare, trebuie returnate la Zebra pentru reciclare. Pentru informaii despre returnarea produsului, accesai: http://www.zebra.com/weee. Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku ivljenjske dobe vrniti podjetju Zebra za reciklao. Za informacije o vrailu izdelka obiite:
http://www.zebra.com/weee. Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrtettvksi Zebra-yhtin, kun tuotetta ei en kytet. Listietoja tuotteen palauttamisesta on osoitteessa http://www.zebra.com/weee. Svenska: Fr kunder inom EU: Alla produkter som uppntt sin livslngd mste returneras till Zebra fr tervinning. Information om hur du returnerar produkten finns p http://www.zebra.com/weee. Hrvatski: Za kupce u Europskoj uniji: Svi se proizvodi po isteku vijeka trajanja moraju vratiti tvrtki Zebra na recikliranje. Informacije o nainu vraanja proizvoda potraite na web-stranici: www.zebra.com/weee. Trke: AB Mterileri iin: Kullanm sresi dolan tm rnler geri dntrme iin Zebra'ya iade edilmelidir. rnlerin nasl iade edilecei hakknda bilgi iin ltfen u adresi ziyaret edin: http://www.zebra.com/weee. Draft v16 Quick Start Guide 25 United States and Canada Regulatory Radio Frequency Interference Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help. Radio Frequency Interference Requirements- Canada Innovation, Science and Economic Development Canada ICES-003 Compliance Label: CAN ICES-3 ([B])/NMB-3([B]) This device complies with Innovation, Science and Economic Development Canadas licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radio lectrique subi mme si le brouillage est susceptible d'en compromettre le fonctionnement. Draft v16 26 CS6080 Scanner RF Exposure Requirements - FCC and ISED The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated in compliance with the FCC RF emission guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid. Brasil Este equipamento no tem direito proteo contra interferncia prejudicial e no pode causar interferncia em sistemas devidamente autorizados. China www.zebra.com/support ISM 5000 Draft v16 Quick Start Guide 27
(Pb)
(Hg)
(Cd)
(Cr(VI)
(PBB)
(PBDE
(Parts)
(Metal Parts)
(Circuit Modules)
(Cables and Cable Assemblies)
(Plastic and Polymeric Parts)
(Optics and Optical Components)
(Batteries) SJ/T 11364 O: GB/T 26572 X:
GB/T 26572
This table was created to comply with China RoHS requirements. EAC. Draft v16 28 CS6080 Scanner India The sending and receiving of texts is supported in the following Indian languages:
Assamese, Bengali, Gujarati, Hindi, Kannada, Kashmiri, Konkani, Malayalam, Manipuri, Marathi, Nepali, Oriya, Punjabi, Sanskrit, Sindhi, Tamil, Telugu, Urdu, Bodo, Santhali, Maithili, and Dogri. Mexico La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. South Korea or Taiwan Draft v16 Quick Start Guide 29
/ 9 13
(EPA) 15 Equipment name CS6080 Type designation (Type) Unit Restricted substances and its chemical symbols
) b P
) g H
) d C
) 6
C r
) B B P
) E D B P
1.0.1 wt %0.01 wt %
Note 1: Exceeding 0.1 wt% and exceeding 0.01 wt%
indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 2. Note 2: indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 3. Note 3: The indicates that the restricted substance corresponds to the exemption. Draft v16 30 CS6080 Scanner TRK WEEE Uyumluluk Beyan EEE Ynetmeli?ine Uygundur.
(Thailand)
. Absorption Rate SAR) model x.xx w/kg
(Specific Draft v16 Quick Start Guide 31 Draft v16 32 CS6080 Scanner Draft v16 Service Information Before you use the unit, it must be configured to operate in your facilitys network and run your applications. If you have a problem using your equipment, contact your facilitys Technical or Systems Support. If there is a problem with the equipment, they will contact the Zebra Global Customer Support at www.zebra.com/support. For the latest version of this guide go to:
www.zebra.com/support. Warranty For the complete Zebra hardware product warranty statement, go to: www.zebra.com/warranty. For Australia Only:
This warranty is given by Zebra Technologies Asia Pacific Pte. Ltd., 71 Robinson Road, #05-02/03, Singapore 068895, Singapore. Our goods come with guarantees that cannot be excluded under the Australia Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Zebra Technologies Corporation Australias limited warranty above is in addition to any rights and remedies you may have under the Australian Consumer Law. If you have any queries, please call Zebra Technologies Corporation at +65 6858 0722. You may also visit our website: http://www.zebra.com for the most updated warranty terms. Zebra Technologies Corporation Lincolnshire, IL U.S.A. http://www.zebra.com 2020 Zebra Technologies Corporation and/or its affiliates. All rights reserved. ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. MN-003828-01EN Revision A - July 2020 Draft v16