FCC ID: UZ7ET45CA Tablet

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6078124.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case DRAFT - INTERNAL USE ONLY - 2022-05-03-05:00 ET40/45 Enterprise Tablet Quick Start Guide MN-004345-01EN Rev A Copyright ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. 2022 Zebra Technologies Corporation and/or its affiliates. All rights reserved. Information in this document is subject to change without notice. The software described in this document is furnished under a license agreement or nondisclosure agreement. The software may be used or copied only in accordance with the terms of those agreements. For further information regarding legal and proprietary statements, please go to:

SOFTWARE: zebra.com/linkoslegal. COPYRIGHTS: zebra.com/copyright. WARRANTY: zebra.com/warranty. END USER LICENSE AGREEMENT: zebra.com/eula. Terms of Use Proprietary Statement This manual contains proprietary information of Zebra Technologies Corporation and its subsidiaries

(Zebra Technologies). It is intended solely for the information and use of parties operating and maintaining the equipment described herein. Such proprietary information may not be used, reproduced, or disclosed to any other parties for any other purpose without the express, written permission of Zebra Technologies. Product Improvements Continuous improvement of products is a policy of Zebra Technologies. All specifications and designs are subject to change without notice. Liability Disclaimer Zebra Technologies takes steps to ensure that its published Engineering specifications and manuals are correct; however, errors do occur. Zebra Technologies reserves the right to correct any such errors and disclaims liability resulting therefrom. Limitation of Liability In no event shall Zebra Technologies or anyone else involved in the creation, production, or delivery of the accompanying product (including hardware and software) be liable for any damages whatsoever (including, without limitation, consequential damages including loss of business profits, business interruption, or loss of business information) arising out of the use of, the results of use of, or inability to use such product, even if Zebra Technologies has been advised of the possibility of such damages. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. DRAFT - INTERNAL USE ONLY - 2022-05-03-05:00 ET40/45 Quick Start Guide Unpacking the Device 1. Carefully remove all protective material from the device and save the shipping container for later storage and shipping. 2. Verify the following items are in the box:

Tablet with lithium-ion battery Regulatory Guide 3. Inspect the equipment for damage. If any equipment is missing or damaged, contact the GlobalCustomer Support Center immediately. 4. Before using the device for the first time, remove the protective shipping film that covers the scan window, display, and camera window. Device Features Figure 1Front View Table 1Device Front View Number Item Description 1 2 3 Front scan button Initiates barcode data capture when a scan-enabled application is active. Touch screen Displays all information needed to operate the device. Light sensor Determines ambient light for controlling display back light intensity. 3 DRAFT - INTERNAL USE ONLY - 2022-05-03-05:00 ET40/45 Quick Start Guide Table 1Device Front View(Continued) Number Item Description 4 5 6 7 8 9 10 11 12 13 14 Front camera Power button Use for video conferencing. Turns the display on and off. Press and release to power on the device. Press and hold to reset the device or power off. Data capture LED Illuminates during data capture. Charging indicator LED Indicates power state and battery charging status while charging and application generated notifications. Scan window Provides data capture using the imager. USB-C port Provides USB host and client communications. Right speaker Provides audio output. Interface connector Provides communication to the device from the dock. Cradle alignment indicator Use to assist in aligning the tablet with a cradle. Left speaker Provides audio output. USB port cover Use to seal the USB port. Available on healthcare devices only. Figure 2Rear View Table 2Device Top View Number Item Description 1 2 Cradle latching slot Used by cradles to secure the tablet. Battery cover Provides access to the replaceable battery. 4 DRAFT - INTERNAL USE ONLY - 2022-05-03-05:00 ET40/45 Quick Start Guide Table 2Device Top View(Continued) Number Item Description 3 4 5 6 7 8 9 10 11 12 13 NFC antenna position Rear Microphone Use to read NFC cards. Use for audio recordings. Rear camera Autofocus camera that takes photos. Rear camera LED flash Provides illumination for the camera. Battery cover notch Lift the notched section of the battery cover to remove the battery cover from the tablet. Top scan button Initiates barcode data capture when a scan-enabled application is active

(programmable). Top Microphone Use for voice communications or audio recordings. Programmable button PTT button Volume up button Volume down button Button that is configurable for use with applications. Typically used forPush-to-Talkcommunications. Where regulatory restrictions exist, button is configurable for use with other applications. Increases audio volume. Decreases audio volume. Setting Up the Device Set up the device before using it for the first time. 1. Install the nano SIM Card. (ET45 only) 2. Charge the device. 3. Power on the device. Installing the nano SIM Card The nano-SIM card is available only on ET45 devices. 1. Ensure the tablet is powered off. 5 DRAFT - INTERNAL USE ONLY - 2022-05-03-05:00 ET40/45 Quick Start Guide 2. Lift the corner of the battery cover up (1) from the notched area and carefully remove the battery cover from the device (2) as shown. 3. Slide and hold the battery lock switch in the unlock position (1). 4. While the switch is in the unlock position, rotate the battery up (2) and then remove it from the battery well (3). 5. After removing the battery from the tablet, release the battery lock switch. 6. If replacing the nano SIM card,remove the existing card. a) Push in the installed SIM card and release. b) The card ejects slightly so that you can remove it. c) Remove the SIM card from the card slot. The card should easily slide out. If not, the SIM card was not ejected correctly. Repeat step A. 6 DRAFT - INTERNAL USE ONLY - 2022-05-03-05:00 ET40/45 Quick Start Guide 7. Insert the nano SIM card with the contacts facing down. 8. 9. Push the SIM card in and ensure that it locks into place. Replace the battery, contacts side first. 10. Slide and holdthe battery lock switch in the unlock position (1). 11. Rotate the battery down into the battery well (2),ensuring it is seated properly. 12. Release the battery lock switch into the lock position. CAUTION: Be aware of the orientation of the battery cover. Failure to replace the battery cover properly may cause damage. 13. Insert the tabbed end of the battery cover into the slots in the battery well (1). 7 DRAFT - INTERNAL USE ONLY - 2022-05-03-05:00 ET40/45 Quick Start Guide 14. Rotate the cover down (2). 15. Carefully press down around the edges of the cover. Make sure that the cover is seated properly. Device Charging Before using the tablet for the first time, connect it to an external power source. Keep the tablet connected to the external power source until it is fully charged. The Charging Indicator LED turns green when the tablet is fully charged. You may use the tablet while it is charging. For the best charging experience, use one of the following charging accessories:

1-Slot Charge Only Cradle(CRD-ET4X-1SCHRG1-01) 4-Slot Charge Only Cradle(CRD-ET4X-4SCHRG1-01) The tablet's main battery charges from fully depleted to 90% in approximately 2 hours, and from fully depleted to 100% in approximately 3 hours. Main Battery Charging Charge the tablet's main battery before using the tablet. The 8 in. tablet main battery charges from fully depleted to 80% in approximately 3 hours. The 10 in. tablet main battery charges from fully depleted to 80% in approximately 4 hours. NOTE: The Charging indicator only illuminates when the device is connected to AC power. 8 DRAFT - INTERNAL USE ONLY - 2022-05-03-05:00 ET40/45 Quick Start Guide Table 3Charging Indicators LED Indication Off Device is not in cradle; not seated properly; or cradle is not powered. Slow blinking orange

(1 blink every 4 seconds) Slow blinking red

(1 blink every 4 seconds) Fast blinking orange

(2 blinks/second) Device is charging. Device is charging but the battery is at end of useful life. Charging error. Possible charging errors include:

Temperature is too low or too high. Charging has gone on too long without completion (typically eight hours). Fast blinking red

(2 blinks/second) Charging error and the battery is at end of useful life.Possible charging errors include:

Temperature is too low or too high. Charging has gone on too long without completion (typically eight Solid Green Solid Red Charging Temperature hours). Charging complete. Charging completebut the battery is at end of useful life. Charge batteries in ambient temperatures from 0C to +40C (32F to 104F) as reported by the battery. Charging is intelligently controlled by the charger. To accomplish this, for small periods of time, the charger alternately enables and disables battery charging to keep the battery at acceptable temperatures. Charging the Device This section describes how to charge the device using any of the ET40/ET45 cradles. 1. Align the device with the alignment pins on the cradle. 9 DRAFT - INTERNAL USE ONLY - 2022-05-03-05:00 ET40/45 Quick Start Guide 2. Insert the device into the cradle. NOTE: Ensure the tablet is flat on the cradle and all charging contacts are touching the charging base. 3. The device Charging LED indicates charging. 10 DRAFT - INTERNAL USE ONLY - 2022-05-03-05:00 ET40/45 Quick Start Guide 4. To remove the device from thecradle, rotate the device down slightly (1) and lift it out of the cradle (2). Powering on the Device Press and hold the Power button until the menu appears. 1-Slot Charge Only Cradle Use a 1-Slot Charge Only cradle to charge one 8" or 10" tablet. CAUTION: Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines. The1-SlotCharge Only Cradle:

Provides power for operating the device. Charges the devices battery and optional Power Pack installed in an Expansion Back. 11 DRAFT - INTERNAL USE ONLY - 2022-05-03-05:00 ET40/45 Quick Start Guide Figure 31-SlotCharge Only Cradle - Front View Number Item 1 Cradle alignment indicator Use to assist in aligning the cradle with the tablet. Description Figure 41-SlotCharge Only Cradle - Rear View 12 DRAFT - INTERNAL USE ONLY - 2022-05-03-05:00 ET40/45 Quick Start Guide Number Item Description 1 Power input Use to connect power to the cradle. 4-Slot Charge Only Cradle Use the 4-Slot Charge Only Cradle to charge up to four 8" or 10" tablets. CAUTION: Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines. The 4-Slot Charge Only Cradle:

Provides 12 VDC power for operating the device. Simultaneously charges up to four devices and up to four Power Packs using the optional Battery Charger Adapter. Figure 54-Slot Charge Only Cradle Need a drawing similar to the above with a power cable and power supply connected. Need a drawing of the back of the cradle. Scanning with an Internal Scanner Use the integrated scanner to capture barcode data. NOTE: To read a barcode, a scan-enabled app is required.The device contains the DataWedge app that allows the user to enable the scanner to decode barcode data and display the barcode content. 1. Ensure that an app is open on the device and a text field is in focus (text cursor in the text field). 2. Point the device at a barcode. 13 DRAFT - INTERNAL USE ONLY - 2022-05-03-05:00 ET40/45 Quick Start Guide 3. Press and hold one of the triggers. 4. Ensure the barcode is within the area formed by the aiming pattern. Reading NFC Cards Read contactless cards using NFC. 1. Launch an NFC enabled application. 2. Hold device as shown. 3. Move the card to the NFC antenna (1) on the back of the device. 1 14 DRAFT - INTERNAL USE ONLY - 2022-05-03-05:00 ET40/45 Quick Start Guide 4. Hold the card steadily until the transaction is complete (usually indicated by the application). 15 www.zebra.com

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6078125.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case ET45 Regulatory Guide Regulatory Information This device is approved under Zebra Technologies Corporation. This guide applies to the following model numbers:

ET45CA ET45CB ET45BA ET45BB All Zebra devices are designed to be compliant with the rules and regulations in the locations they are sold and will be labeled as required. Local language translation / Traduo do idioma local / bersetzung in die lokale Sprache / Raduccion de idioma local / Traduction en langue locale / Prijevod na lokalni jezik / Traduzione in lingua locale /

/ / / / / Yerel dil eviri

/Tumaczenie na jzyk lokalny : zebra.com/support Any changes or modifications to Zebra equipment not expressly approved by Zebra could void the users authority to operate the equipment. Declared maximum operating temperature: 50C CAUTION: Only use Zebra approved and NRTL-certified accessories, battery packs, and battery chargers. Do NOT attempt to charge damp/wet mobile computers, printers or batteries. All components must be dry before connecting to an external power source. Bluetooth Wireless Technology This is an approved Bluetooth product. For more information on the Bluetooth SIG listing, please visit bluetooth.com. Regulatory Markings Regulatory markings subject to certification are applied to the device signifying the radio(s) is/are approved for use. Refer to the Declaration of Conformity (DoC) for details of other country markings. The DOC is available at: zebra.com/doc. The regulatory marks specific to this device (including FCC and ISED) are available on the screen of the device by following these instructions:

Go to Settings > Regulatory. Health and Safety Recommendations Ergonomic Recommendations In order to avoid or minimize the potential risk of ergonomic injury, always follow good ergonomic workplace practices. Consult with your local Health and Safety Manager to ensure that you are adhering to your companys safety programs to prevent employee injury. ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. 2022 Zebra Technologies Corp. and/or its affiliates. All rights reserved. | www.zebra.com MN-004439-01EN Rev. A DRAFT FOR REVIEW ONLY ET45 Regulatory Guide Safety in Hospitals and Aircraft NOTE: Wireless devices transmit radio frequency energy that may affect medical electrical equipment and aircrafts operation. Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics, healthcare facilities or by airline staff. These requests are designed to prevent possible interference with sensitive equipments. Medical Devices It is recommended that a minimum separation distance of 20 cm (8 inches) be maintained between a wireless device and a medical devices such as pacemakers, defibrillator, or other implantable devices to avoid potential interference with the medical device. Pacemaker users should keep the device at the opposite side of the pacemaker or turn OFF the device if suspected of interference. Please consult your physician or the manufacturer of the medical device to determine if the operation of your wireless product may interfere with the medical device. RF Exposure Guidelines Safety Information Reducing RF Exposure Use Properly Only operate the device in accordance with the instructions supplied. The device complies with internationally recognized standards covering human exposure to electromagnetic fields. For information on international human exposure to electromagnetic fields, refer to the Zebra Declaration of Conformity (DoC) at zebra.com/doc. Use only Zebra tested and approved headset, belt-clips, holsters, and similar accessories to ensure RF exposure compliance. If applicable, follow the instructions for use as detailed in the accessory guide. The use of third-party belt clips, holsters, and similar accessories may not comply with RF exposure compliance requirements and should be avoided. For further information on the safety of RF energy from wireless devices, refer to RF exposure and assessment standards section at zebra.com/responsibility. To satisfy RF exposure requirements, this device must operate with a minimum separation distance of 0 cm or more from a user's body and nearby persons. Optical Devices Laser Devices Class 2 laser scanners use a low power, visible light diode. As with any very bright light source such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful. CAUTION: Use of controls, adjustments, or the performance of procedures other than those specified in the supplied product documentation may result in hazardous laser light exposure. 2 DRAFT FOR REVIEW ONLY ET45 Regulatory Guide SE5500 Wavelength: 500-570 nm Maximum Output: 1mW Pulse Duration: 4 ms Beam Divergence: 18 Repetition Rate: 16.7 ms Scanner Labeling

1 2 Complies with 21CFR1040.10 &1040.11, except for deviations pursuant to Laser Notice No. 56, dated May 8, 2019 and IEC/EN 60825-1:2014. Labels read:

1. Laser Light do not stare into beam Class 2 Laser product. 500-570nm, 1mW 4ms 2. Complies with 21CFR1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 56, dated May 08, 2019 and IEC/EN 60825-1:2014. CAUTION: Laser light emitted from this apeture.

LED Devices Classified as EXEMPT RISK GROUP according to IEC 62471:2006 and EN 62471:2008. SE4100 Pulse Duration: CW Exempt Group (RG0) SE4710 Pulse Duration: CW Exempt Group (RG0) SE4720 Pulse Duration: CW Exempt Group (RG0) SE5500 Pulse Duration: CW Exempt Group (RG0) 3 DRAFT FOR REVIEW ONLY ET45 Regulatory Guide Power Supply WARNING ELECTRICAL SHOCK: Use only a Zebra approved, Certified ITE LPS power supply with appropriate electrical ratings. Use of alternative power supply will invalidate any approvals given to this unit and may be dangerous. Batteries and Power Packs This information applies to Zebra-approved batteries and power packs containing batteries. Battery Information CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of batteries according to instructions. Use only Zebra approved batteries. Accessories which have battery charging capability are approved for use with the following battery models:

Model BT-000455 (3.87 VDC, 6100 mAh) Model BT-000456 (3.87 VDC, 7600 mAh) Zebra approved rechargeable battery packs are designed and constructed to the highest standards within the industry. However, there are limitations as to how long a battery can operate or be stored before needing replacement. Many factors affect the actual life cycle of a battery pack such as heat, cold, harsh environmental conditions, and severe drops. When batteries are stored over six months, some irreversible deterioration in overall battery quality may occur. Store batteries at half charge in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of metallic parts, and electrolyte leakage. When storing batteries for one year or longer, the charge level should be verified at least once a year and charged to half charge. Replace the battery when a significant loss of run time is detected. Standard warranty period for all Zebra batteries is one year, regardless if the battery was purchased separately or included as part of the host device. For more information on Zebra batteries, please visit:

zebra.com/batterydocumentation and select the Battery Best Practices link. Battery Safety Guidelines IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS WARNING When using this product basic safety precautions should always be followed, including the following:

The area in which the units are charged should be clear of debris and combustible materials or chemicals. Particular care should be taken where the device is charged in a non-commercial environment. Read all the instructions before using the product. Follow battery usage, storage, and charging guidelines found in the user's guide. Improper battery use may result in a fire, explosion, or other hazard. To charge the mobile device battery, the battery and charger temperatures must be between 0C and +40C (+32F and +104F). 4 DRAFT FOR REVIEW ONLY ET45 Regulatory Guide Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present a risk of fire, explosion, leakage, or other hazard. If you have any questions about the compatibility of a battery or a charger, contact Zebra support. Do not disassemble or open, crush, bend or deform, puncture, or shred. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury. Severe impact from dropping any battery-operated device on a hard surface could cause the battery to overheat. Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals. Do not modify, disassemble, or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water, rain, snow or other liquids, or expose to fire, explosion, or other hazard. Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle or near a radiator or other heat source. Do not place battery into a microwave oven or dryer. To reduce the risk of injury, close supervision is necessary when used near children. Please follow local regulations to promptly dispose of used re-chargeable batteries. Do not dispose of batteries in fire. Exposure to temperatures over 100C (212F) may cause explosion. Seek medical advice immediately if a battery has been swallowed. In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with large amounts of water and seek medical advice. If you suspect damage to your equipment or battery, contact Zebra support to arrange for inspection. Do not use a power pack in excess of its output rating. Overload outputs may result in risk of fire or injury to persons. Have service performed by a qualified Zebra service center. This will insure safety of the product is maintained. Marking and European Economic Area (EEA) Statement of Compliance Zebra hereby declares that this radio equipment is in compliance with Directives 2014/53/EU and 2011/65/EU. Any radio operation limitations within EEA countries are identified in Appendix A of EU Declaration of Conformity. The full text of the EU Declaration of Conformity is available at: zebra.com/doc. EU Importer : Zebra Technologies B.V Address: Mercurius 12, 8448 GX Heerenveen, Netherlands Waste Electrical and Electronic Equipment (WEEE) For EU and UK Customers: For products at the end of their life, please refer to recycling/disposal advice at: zebra.com/weee. 5 DRAFT FOR REVIEW ONLY ET45 Regulatory Guide United States and Canada Regulatory Radio Frequency Interference Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.These limits are designed to provide reasonable protection against harmfulb interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Radio Frequency Interference Requirements Canada This device complies with Innovation, Science and Economic Development Canadas licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radio lectrique subi mme si le brouillage est susceptible d'en compromettre le fonctionnement. This device is restricted to indoor use when operating in the 5150 to 5350 MHz frequency range. Lorsqu'il fonctionne dans la plage de frquences 5 150- 5350 MHz, cet appareil doit tre utilis exclusivement en extrieur. RF Exposure Requirements - FCC and ISED The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated in compliance with the FCC RF emission guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of fcc.gov/oet/ea/fccid. To satisfy RF exposure requirements, this device must operate with a minimum separation distance of 0 cm or more from a user's body and nearby persons. Pour satisfaire aux exigences d'exposition aux radio frquences, cet appareil doit fonctionner avec une distance de sparation minimale de 0 cm ou plus de corps d'une personne. Hotspot Mode To satisfy RF exposure requirements in hotspot mode, this device must operate with a minimum separation distance of 1.0 cm or more from a users body and nearby pesons. 6 DRAFT FOR REVIEW ONLY ET45 Regulatory Guide Pour satisfaire aux exigences dexposition aux RF en mode points daccs sans fil, cet appareil doit fonctionner une distance minimale de 1,0 cm du corps de lutilisateur et des personnes proximit. Co-located Statement To comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must not be co-located (within 20 cm) or operating in conjunction with any other transmitter/antenna except those already approved in this filling. Hotspot ISED Notice When operating in hotspot mode, this device is restricted to indoor use when operating in the 5150 - 5350 MHz frequency range. En mode de connexion partage (hotspot), l'utilisation de cet appareil doit se faire exclusivement en extrieur lorsqu'il fonctionne dans la plage de frquences 5 150 - 5 350 MHz. UL Listed Products with GPS Underwriters Laboratories Inc. (UL) has not tested the performance or reliability of the Global Positioning System (GPS) hardware, operating software, or other aspects of this product. UL has only tested for fire, shock, or casualties as outlined in ULs Standard(s) for Safety for Information Technology Equipment. UL Certification does not cover the performance or reliability of the GPS hardware and GPS operating software. UL makes no representations, warranties, or certifications whatsoever regarding the performance or reliability of any GPS related functions of this product. Marquage UL des produits quips d'un GPS Les tests mens par Underwriters Laboratories Inc. (UL) ne portent ni sur les performances, ni sur la fiabilit du matriel et du logiciel d'exploitation du GPS (Global Positioning System), ni sur tout autre aspect de ce produit. UL a uniquement test la rsistance au feu, aux chocs et aux sinistres, comme le dfinit la norme UL60950-1 relative la scurit des matriels de traitement de l'information. La certification UL ne couvre ni les performances, ni la fiabilit du matriel et du logiciel d'exploitation GPS. UL ne formule aucune dclaration, ni ne dlivre aucune garantie ni aucun certificat concernant les performances et la fiabilit des fonctions GPS de ce produit. Brasil Este equipamento no tem direito proteo contra interferncia prejudicial e no pode causar interferncia em sistemas devidamente autorizados. 7 DRAFT FOR REVIEW ONLY ET45 Regulatory Guide Este produto est homologado pela Anatel de acordo com os procedimentos regulamentados para avaliao da conformidade de produtos para telecomunicaes e atende aos requisitos tcnicos aplicados, incluindo os limites de exposio da Taxa de Absoro Especfica referente a campos eltricos, magnticos e eletromagnticos de radiofrequncia. zebra.com/support

: tenaa.com.cn/.

CCC ISM 5000 8 DRAFT FOR REVIEW ONLY ET45 Regulatory Guide

(Parts)

(Pb)

(Hg)

(Cd)

(Cr(VI))

(PBB)

(PBDE)

(Metal Parts)

(Circuit

(Cables

(Optics

(Print Heads)

(Batteries) O O O O O O O SJ/T 11364 O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O: GB/T 26572 X: GB/T 26572 (

(EAC) EAC. France Mxico Cet appareil a t test et dclar conforme aux limites applicables d'exposition aux radiofrquences (RF). Le dbit d'absorption spcifique (DAS) local quantifie l'exposition de l'utilisateur aux ondes lectromagntiques de l'quipement concern. Les valeurs DAS les plus leves sont disponibles sur la dclaration de conformit (DoC) disponible sur:

zebra.com/doc. La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. XX mm . 9 DRAFT FOR REVIEW ONLY ET45 Regulatory Guide ET45CA, ET45CB SAR 2.0 W/kg X.XX W/kg

/ 9 13

(EPA) 15

: ET45BA, ET45BB, ET45CA, ET45CB Model Type designation (Type) Unit Restricted substances and its chemical symbols

(Pb)

(Hg)

(Cd)

(Cr+6)

(PBB)

(PBDE) O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O 1. 0.1 wt % 0.01 wt %

2. O 3. Note 1: Exceeding 0.1 wt% and exceeding 0.01 wt% indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. Note 2: O indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. Note 3: The indicates that the restricted substance corresponds to the exemption. TRK WEEE Uyumluluk Beyan EEE Ynetmeliine Uygundur. 10 DRAFT FOR REVIEW ONLY ET45 Regulatory Guide

(Specific Absorption Rate SAR) ET45CA X.XX w/kg ET45CA X.XX w/kg United Kingdom Statement of Compliance Zebra hereby declares that this radio equipment is in compliance with the Radio Equipment Regulations 2017 and the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. Any radio operation limitations within UK are identified in Appendix A of UK Declaration of Conformity. The full text of the UK Declaration of Conformity is available at: zebra.com/doc. UK Importer: Zebra Technologies Europe Limited Address:

Dukes Meadow, Millboard Rd, Bourne End, Buckinghamshire, SL8 5XF 11 DRAFT FOR REVIEW ONLY ET45 Regulatory Guide Warranty For the complete Zebra hardware product warranty statement, go to: zebra.com\warranty. Service Information Before you use the unit, it must be configured to operate in your facility's network and run your applications. If you have a problem running your unit or using your equipment, contact your facility's Technical or System Support. If there is a problem with the equipment, they will contact Zebra support at zebra.com/support. For the latest version of the guide go to: zebra.com\support. Software Support Zebra wants to ensure that customers have the latest entitled software at the time of device purchase in order to keep the device operating at peak performance levels. To confirm that your Zebra device has the latest entitled software available at the time of purchase, go to zebra.com/support. Check for the latest software from Support > Products, or search for the device and select Support >

Software Downloads. If your device does not have the latest entitled software as of your device purchase date, e-mail Zebra at entitlementservices@zebra.com and ensure you include the following essential device information:

Model number Serial number Proof of purchase Title of the software download you are requesting. If it is determined by Zebra that your device is entitled to the latest version of software, as of the date you purchased your device, you will receive an e-mail containing a link directing you to a Zebra Web site to download the appropriate software. Product Support Information For information on using this product, see the User Guide at zebra.com/et4x-series. 13 DRAFT FOR REVIEW ONLY

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6078268.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6078267.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6078266.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Regulatory Engineering Date: July 5, 2022 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: FCC ID: UZ7ET45CA AUTHORIZATION LETTER We, the undersigned, hereby authorize Jim Tsai in Sporton International Inc (Kunshan). to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Jim Tsai in Sporton International Inc

(Kunshan). on our behalf shall have the same effect as acts of our own. If you have any acknowledgement and response, please send it to Sporton International Inc (Kunshan). directly. Confidentiality Request Pursuant to the provisions of Sections 0.457 and 0.459 of Commissions rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Part List Operational Description Tune-up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission s policy, in order to comply with the marketing regulations in 47 CFT 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant shot-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. Zebra Technologies Corporation 1 Z e b r a P l a z a , | H o l t s v i l l e , N Y 1 1 7 4 2 | 1 . 6 3 1 . 7 3 8 . 2 4 0 0 p h o n e | 1 . 6 3 1 . 6 2 7 . 7 1 7 9 f a x | w w w . z e b r a . c o m Regulatory Engineering Internal Photos External Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Label Location Attestation We attest that the label of device FCC ID: UZ7ET45CA is located in the battery room. The label is visible to the users as they purchase the product and install the battery. If you have any questions regarding this authorization, please contact me directly. Signature

_______________________________ Name and Job Title. E-mail Tel.

: Larry (Qianlin) Zhou / Regulatory Specialist

: larry.zhou@zebra.com

: 346-260-3543 Zebra Technologies Corporation 1 Z e b r a P l a z a , | H o l t s v i l l e , N Y 1 1 7 4 2 | 1 . 6 3 1 . 7 3 8 . 2 4 0 0 p h o n e | 1 . 6 3 1 . 6 2 7 . 7 1 7 9 f a x | w w w . z e b r a . c o m