FCC ID: UZ7TC210K Touch computer

TC21 Touch Computer Quick Start Guide MN-003892-01EN REVIEW ONLY 2/25/20 TC21 Quick Start Guide Copyright ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. 2019 Zebra Technologies Corporation and/or its affiliates. All rights reserved. COPYRIGHTS & TRADEMARKS: For complete copyright and trademark information, go to www.zebra.com/copyright. WARRANTY: For complete warranty information, go to www.zebra.com/warranty. END USER LICENSE AGREEMENT: For complete EULA information, go to www.zebra.com/eula. Terms of Use Proprietary Statement Product Improvements Liability Disclaimer Limitation of Liability This manual contains proprietary information of Zebra Technologies Corporation and its subsidiaries

(Zebra Technologies). It is intended solely for the information and use of parties operating and maintaining the equipment described herein. Such proprietary information may not be used, reproduced, or disclosed to any other parties for any other purpose without the express, written permission of Zebra Technologies. Continuous improvement of products is a policy of Zebra Technologies. All specifications and designs are subject to change without notice. Zebra Technologies takes steps to ensure that its published Engineering specifications and manuals are correct; however, errors do occur. Zebra Technologies reserves the right to correct any such errors and disclaims liability resulting therefrom. In no event shall Zebra Technologies or anyone else involved in the creation, production, or delivery of the accompanying product (including hardware and software) be liable for any damages whatsoever (including, without limitation, consequential damages including loss of business profits, business interruption, or loss of business information) arising out of the use of, the results of use of, or inability to use such product, even if Zebra Technologies has been advised of the possibility of such damages. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. REVIEW ONLY 2/25/20 TC21 Quick Start Guide Unpacking 1. Carefully remove all protective material from the device and save the shipping container for later storage 3. Inspect the equipment for damage. If any equipment is missing or damaged, contact the Global Customer 4. Prior to using the device for the first time, remove the protective shipping film that covers the scan window, and shipping. 2. Verify that the following were received:

Touch computer PowerPrecision+ Lithium-ion battery Regulatory Guide. Support center immediately. display and camera window. Features Figure 1 Front View 6 5 7 3 4 2 12 1 13 1 2 3 4 5 8 9 10 Function 11 Table 1 Front View Features Number Item Front Camera Takes photos and videos (available on some models). Receiver Use for audio playback in Handset mode. Proximity Sensor Determines proximity for turning off display when in handset mode. Microphone Use for communications in Speakerphone mode. Data Capture LED Indicates data capture status. REVIEW ONLY 2/25/20 TC21 Quick Start Guide Table 1 Front View Features<em_Emphasis> (continued) Number Item Function Light Sensor Determines ambient light for controlling display backlight intensity. Charging/Notification LED Indicates battery charging status while charging and application generated notifications. Touch Screen Displays all information needed to operate the device. Microphone Use for communications in Handset mode. USB-C Connector Provides USB host and client communications, and device charging via cables and accessories. Speaker Scan Button PTT Button Provides audio output for video and music playback. Provides audio in speakerphone mode. Initiates data capture (programmable). Initiates push-to-talk communications (programmable). Figure 2 Rear View 14 15 16 17 18 21 20 19 Table 2 Back View Features Number Item 14 Battery Function Standard - 3,300 mAh (typical) / 3,100 mAh (minimum) PowerPrecision+ Lithium-ion Battery Extended - 5,400 mAh (typical) / 5,400 mAh (minimum), PowerPrecision+ Lithium-ion Battery. Basic Hand Strap Mount Provides mounting point for Basic Hand Strap accessory. Volume Up/Down Button Increase and decrease audio volume (programmable). 6 7 8 9 10 11 12 13 15 15 16 18 22 REVIEW ONLY 2/25/20 TC21 Quick Start Guide Table 2 Back View Features <em_Emphasis> (continued) Number Item Function Scan Button Initiates data capture (programmable). Battery Release Latches Press to remove the battery. Camera Flash Provides illumination for the camera. Rear Camera Power Button Takes photos and videos. Turns the display on and off. Press and hold to reset the device, power off or swap battery. Exit Window Provides data capture using the imager. 17 18 19 20 21 22 Setting Up the Device To start using the device for the first time. 1. Install a micro secure digital (SD) card (optional). 2. Install hand strap (optional). 3. Install the battery. 4. Charge the device. 5. Power on the device. Installing a microSD Card The microSD card slot provides secondary non-volatile storage. The slot is located under the battery pack. Refer to the documentation provided with the card for more information, and follow the manufacturers recommendations for use. CAUTION: Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card. Proper ESD pre-

cautions include, but are not limited to, working on an ESD mat and ensuring that the operator is properly grounded. 1. Lift the access door. Figure 3 Lift Access Door REVIEW ONLY 2/25/20 TC21 Quick Start Guide 2. Slide the microSD card holder to the unlock position. Figure 4 Unlock microSD Card Holder 3. Lift the microSD card holder. Figure 5 Lift the microSD Card Holder 4. Insert the microSD card into the card holder door ensuring that the card slides into the holding tabs on each side of the door. Figure 6 Insert microSD Card in Holder 5. Close the microSD card holder and slide into the lock position. Figure 7 Re-install Access Door CAUTION: Access door must be replaced and securely seated to ensure proper device sealing. REVIEW ONLY 2/25/20 TC21 Quick Start Guide 6. Re-install the access door. Figure 8 Replace Access Door Installing the Battery NOTE: User modification of the device, particularly in the battery well, such as labels, asset tags, engravings, stickers, etc., may compromise the intended performance of the device or accessories. Performance levels such as sealing (Ingress Pro-

tection (IP)), impact performance (drop and tumble), functionality, temperature resistance, etc. could be effected. DO NOT put any labels, asset tags, engravings, stickers, etc. in the battery well. 1. Insert the battery, bottom first, into the battery compartment in the back of the device. Figure 9 Insert Bottom of Battery into Battery Compartment 2. Press the battery down into the battery compartment until the battery release latches snap into place. REVIEW ONLY 2/25/20 TC21 Quick Start Guide Charging the Device CAUTION: Ensure that you follow the guidelines for battery safety described in the device Product Reference Guide. Use one of the following accessories to charge the device and/or spare battery. Main Battery Charging To charge a device:

1. Insert the device into a slot to begin charging. 2. Ensure the device is seated properly. The devices Charging/Notification LED indicates the status of the battery charging in the device. The 3,220 mAh (typical) standard battery charges from fully depleted to 90% in approximately 2.5 hours and from fully depleted to 100% in approximately three hours. The 5,260 mAh (typical) extended battery charges from fully depleted to 90% in approximately four hours and from fully depleted to 100% in approximately five hours. REVIEW ONLY 2/25/20 TC21 Quick Start Guide NOTE: In many cases the 90% charge provides plenty of charge for daily use. A full 100% charge lasts for approximately 14 hours of use. To achieve the best fast charging results use only Zebra charging accessories and batteries. Charge batteries at room temperature with the device in sleep mode. Table 4 Charging/Notification LED Charging Indicators State Indication Off Device is not charging. Device is not inserted correctly in the cradle or connected to a power source. Charger/cradle is not powered. Slow Blinking Amber (1 blink every 4 seconds) Device is charging. Slow Blinking Red (1 blink every 4 seconds) Device is charging but the battery is at end of useful life. Solid Green Solid Red Fast Blinking Amber (2 blinks/second) Charging complete. Charging complete but the battery is at end of useful life. Charging error, for example:

Temperature is too low or too high. Charging has gone on too long without completion (typically eight hours). Temperature is too low or too high. Charging has gone on too long without completion (typically eight hours). Fast Blinking Red (2 blinks/second) Charging error but the battery is at end of useful life., for example:

Spare Battery Charging To charge a spare battery:

1. Insert the battery into a battery charging well. 2. Gently press down on the battery to ensure proper contact. The Spare Battery Charging LED on the cup indicates the status of the spare battery charging. The 3,220 mAh

(typical) standard battery charges from fully depleted to 90% in approximately 2.5 hours and from fully depleted to 100% in approximately three hours. The 5,260 mAh (typical) extended battery charges from fully depleted to 90% in approximately four hours and from fully depleted to 100% in approximately five hours. NOTE: In many cases the 90% charge provides plenty of charge for daily use. A full 100% charge lasts for approximately 14 hours of use. To achieve the best fast charging results use only Zebra charging accessories and batteries. REVIEW ONLY 2/25/20 TC21 Quick Start Guide USB cable Figure 16 USB cable The USB cable plugs into the bottom of the device. When attached to the device the cable allows charging, transferring data to a host computer, and connecting USB peripherals. REVIEW ONLY 2/25/20 TC21 Quick Start Guide Scanning with Internal Imager To read a barcode, a scan-enabled app is required. The device contains the DataWedge app that allows the user to enable the imager, decode the barcode data, and display the barcode content. To scan with the internal imager:

1. Ensure that an app is open on the device and a text field is in focus (text cursor in text field). 2. Point the exit window on the top of the device at a barcode. Figure 17 Imager Scanning 3. Press and hold the scan button. The red laser aiming pattern turns on to assist in aiming. NOTE: When the device is in Picklist mode, the imager does not decode the barcode until the crosshair or aiming dot touches the barcode. 4. Ensure the barcode is within the area formed by the crosshairs in the aiming pattern. The aiming dot increases visibility in bright lighting conditions. Figure 18 Aiming Pattern REVIEW ONLY 2/25/20 TC21 Quick Start Guide Figure 19 Pick List Mode with Multiple Barcodes 5. The Data Capture LED lights green and a beep sounds, by default, to indicate the barcode was decoded successfully. 6. Release the scan button. NOTE: Imager decoding usually occurs instantaneously. The device repeats the steps required to take a digital picture (im-

age) of a poor or difficult barcode as long as the scan button remains pressed. 7. The barcode content data displays in the text field. REVIEW ONLY 2/25/20

TC210K Regulatory Guide MN-003847-01EN Rev. A - 4/2020 Zebra Technologies | 3 Overlook Point | Lincolnshire, IL 60069 USA www.zebra.com ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. 2019 Zebra Technologies Corporation and/or its affiliates. All rights reserved. Regulatory Information This device is approved under Zebra Technologies Corporation. All Zebra devices are designed to be compliant with the rules and regulations in locations they are sold and will be labeled as required. Local language translations are available at the following website: www.zebra.com/support. Any changes or modifications to Zebra equipment, not expressly approved by Zebra, could void the users authority to operate the equipment. Declared maximum operating temperature: 50C. CAUTION: Only use Zebra approved and UL Listed accessories, battery packs, and battery chargers. Do NOT attempt to charge damp/wet mobile comput-

ers or batteries. All components must be dry before connecting to an external power source. Wireless Device Country Approvals Regulatory markings subject to certification are applied to the device signifying the radio(s) is/are approved for use in the following countries and continents: United States, Canada, Japan, China, South Korea, Australia, and Europe. Please refer to the Declaration of Conformity (DoC) for details of other country markings. This is available at:

www.zebra.com/doc. Industry Canada Statement For Safe Installation CAUTION: Operation of the device without regulato-

ry approval is illegal. The regulatory marks specific to this device (includ-

ing FCC and ISED) are available on the screen of the device by following these instructions:

Go to Settings > Regulatory. Country Roaming This device incorporates the International Roaming feature (IEEE802.11d), which will ensure the product operates on the correct channels for the particular country of use. Wi-Fi Direct Operation is limited to the following channels/bands as supported in the country of use:

Channels 1 - 11 (2,412 - 2,462 MHz) Channels 36 - 48 (5,150 - 5,250 MHz) Channels 149 - 165 (5,745 - 5,825 MHz) Frequency of Operation FCC and IC 5 GHz Only CAUTION: The device for the band 5,150 - 5,250 MHz is only for indoor usage to reduce potential for harmful interference to co-Channel mobile satellite systems. High power radars are allocated as primary users (meaning they have priority) of 5,250 - 5,350 MHz and 5,650 - 5,850 MHz and these radars could cause interference and/or damage to LE-LAN devic-

es. AVERTISSEMENT: Le dispositive fonctionnant dans la bande 5,150 - 5,250 MHz est rserv uniquement pour une utilisation l'intrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. Les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--

d., qu'ils ont la priorit) pour les bands 5,250 - 5,350 MHz et 5,650 - 5,850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. The available channels for 802.11 operation in the US are Channels 1 to 11. The range of channels is limited by firmware. Health and Safety Recommendations Ergonomic Recommendations CAUTION: In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your local Health & Safety Man-

ager to ensure that you are adhering to your compa-

ny's safety programs to prevent employee injury. Reduce or eliminate repetitive motion Maintain a natural position Reduce or eliminate excessive force Keep objects that are used frequently within easy reach Perform tasks at correct heights Reduce or eliminate vibration Reduce or eliminate direct pressure Provide adjustable workstations Provide adequate clearance Provide a suitable working environment Improve work procedures. Vehicle Installation RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (including safety systems). Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer about any equipment that has been added to your vehicle. An air bag inflates with great force. DO NOT place objects, including either installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result. Position the device within easy reach. Be able to access the device without removing your eyes from the road. IMPORTANT: Before installing or using, check state and local laws regarding windshield mounting and use of equipment. Do not put your phone in a location that obstructs the drivers vision or interferes with the operation of the Vehicle. Do not cover an airbag. Safety on the Road Do not take notes or use the device while driving. Jotting down a to do list or flipping through your address book takes attention away from your primary responsibility, driving safely. When driving a car, driving is your first responsibility -

Give full attention to driving. Check the laws and regulations on the use of wireless devices in the areas where you drive. Always obey them. When using a wireless device behind the wheel of a car, practice good common sense and remember the following tips:

1. Get to know your wireless device and any features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road. 2. When available, use a hands free device. 3. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be hazardous. 4. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue. 5. Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations that have the potential to divert your attention from the road. 6. Use your wireless phone to call for help. Dial the Emergency services, (9-1-1 in the US, and 1-1-2 in Europe) or other local emergency number in the case of fire, traffic accident or medical emergencies. Remember, it is a free call on your wireless phone! The call can be made regardless of any security codes and depending on a network, with or without a SIM card inserted. 7. Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call the Emergency Services, (9-1-1 in the US, and 1-1-2 in Europe) or other local emergency number, as you would want others to do for you. 8. Call roadside assistance or a special non-

emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-

emergency wireless number. The wireless industry reminds you to use your device

/ phone safely when driving. Warnings for Use of Wireless Devices CAUTION: Please observe all warning notices with regard to the usage of wireless devices. Potentially Hazardous Atmospheres Vehicles Use You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants etc. and areas where the air contains chemicals or particles (such as grain, dust, or metal powders) and any other area where you would normally be advised to turn off your vehicle engine. Safety in Aircraft Switch off your wireless device whenever you are instructed to do so by airport or airline staff. If your device offers a flight mode or similar feature, consult airline staff as to its use in flight. Safety in Hospitals Wireless devices transmit radio frequency energy and may affect medical electrical equipment. Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics or healthcare facilities. These requests are designed to prevent possible interference with sensitive medical equipment. Pacemakers Pacemaker manufacturers recommended that a minimum of 15 cm (6 inches) be maintained between a handheld wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with independent research and recommendations by Wireless Technology Research. Persons with Pacemakers:

Should ALWAYS keep the device more than 15 cm (6 inches) from their pacemaker when turned ON. Should not carry the device in a breast pocket. Should use the ear furthest from the pacemaker to minimize the potential for interference. If you have any reason to suspect that interference is taking place, turn OFF your device. Other Medical Devices Please consult your physician or the manufacturer of the medical device, to determine if the operation of your wireless product may interfere with the medical device. RF Exposure Guidelines Power Supply Safety Information Reducing RF Exposure Use Properly Only operate the device in accordance with the instructions supplied. International The device complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices. For information on 'International' human exposure to electromagnetic fields, refer to the Zebra Declaration of Conformity (DoC) at www.zebra.com/doc. For further information on the safety of RF energy from wireless devices, see www.zebra.com/responsibility located under Corporate Responsibility. Europe This device was tested for typical body-worn operation. Use only Zebra tested and approved belt-

clips, holsters, and similar accessories to ensure EU Compliance. US and Canada Co-located statement To comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must not be co-located or operating in conjunction with any other transmitter/antenna except those already approved in this filing. Terminals (placed to ear or used with headset) Use only Zebra tested and approved belt clips, holsters, and similar accessories to ensure FCC Compliance. The use of third-party belt clips, holsters, and similar accessories may not comply with FCC RF exposure compliance requirements and should be avoided. The FCC has granted an Equipment Authorization for these terminals with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on these terminals is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/

ea/fccid. Handheld Devices This device was tested for typical body worn operation. Use only Zebra tested and approved belt-

clips, holsters, and similar accessories to ensure FCC Compliance. The use of third-party belt clips, holsters, and similar accessories may not comply with FCC RF exposure compliance requirements, and should be avoided. To satisfy US and Canadian RF exposure requirements, a transmitting device must operate with a minimum separation distance of 1.5 cm or more from a person's body. Pour satisfaire aux exigences Amricaines et Canadiennes d'exposition aux radio frquences, un dispositif de transmission doit fonctionner avec une distance de sparation minimale de 1.5 cm ou plus de corps d'une personne. LED Devices Classified as EXEMPT RISK GROUP according to IEC 62471:2006 and EN 62471:2008. Pulse duration: CW Use ONLY a Zebra approved Nationally Recognized Test Laboratory (NRTL) Certified ITE (LPS/SELV) power supply with electrical ratings: Output 5 VDC, min 2.5 A, with a maximum ambient temperature of at least 50 C. Use of alternative power supply will invalidate any approvals given to this unit and may be dangerous. Batteries Taiwan - Recycling EPA

(Environmental Protection Administration) requires dry battery producing or importing firms in accordance with Article 15 of the Waste Disposal Act are required to indicate the recycling marks on the batteries used in sales, giveaway or promotion. Contact a qualified Taiwanese recycler for proper battery disposal. Battery Information CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of batteries according to instructions. Use only Zebra approved batteries. Accessories which have battery charging capability are approved for use with the following battery model:

Model BT-000409 (4.35 Vdc, 3300 mAh). Zebra approved rechargeable battery packs are designed and constructed to the highest standards within the industry. However, there are limitations to how long a battery can operate or be stored before needing replacement. Many factors affect the actual life cycle of a battery pack, such as heat, cold, harsh environmental conditions and severe drops. When batteries are stored over six (6) months, some irreversible deterioration in overall battery quality may occur. Store batteries at half of full charge in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of metallic parts and electrolyte leakage. When storing batteries for one year or longer, the charge level should be verified at least once a year and charged to half of full charge. Replace the battery when a significant loss of run time is detected. Standard warranty period for all Zebra batteries is one year, regardless if the battery was purchased separately or included as part of the mobile computer or bar code scanner. For more information on Zebra batteries, please visit: www.zebra.com/batterybasics. Battery Safety Guidelines The area in which the units are charged should be clear of debris and combustible materials or chemicals. Particular care should be taken where the device is charged in a non-commercial environment. Follow battery usage, storage, and charging guidelines found in the user's guide. Improper battery use may result in a fire, explosion, or other hazard. This guide applies to Model Number TC210K. 2.4 GHz Only REVIEW ONLY To charge the mobile device battery, the battery and charger temperatures must be between

+32F and +104F (0C and +40C). Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present a risk of fire, explosion, leakage, or other hazard. If you have any questions about the compatibility of a battery or a charger, contact Zebra support. For devices that utilize a USB port as a charging source, the device shall only be connected to products that bear the USB-IF logo or have completed the USB-IF compliance program. Do not disassemble or open, crush, bend or deform, puncture, or shred. Severe impact from dropping any battery-

operated device on a hard surface could cause the battery to overheat. Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals. Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, or expose to fire, explosion, or other hazard. Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle or near a radiator or other heat source. Do not place battery into a microwave oven or dryer. Battery usage by children should be supervised. Please follow local regulations to promptly dispose of used re-chargeable batteries. Do not dispose of batteries in fire. Seek medical advice immediately if a battery has been swallowed. In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with large amounts of water and seek medical advice. If you suspect damage to your equipment or battery, contact Zebra support to arrange for inspection. Use with Hearing Aids - FCC When some wireless devices are used near some hearing devices (hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise, and wireless devices also vary in the amount of interference they generate. In the event of interference you may want to consult your hearing aid supplier to discuss solutions. Hearing Aid Compatibility This phone has been tested and rated for use with hearing aids for some of the wireless technologies that it uses. However, there may be some newer wireless technologies used in this phone that have not been tested yet for use with hearing aids. It is important to try the different features of this phone thoroughly and in different locations using your hearing aid or cochlear implant to determine if you hear any interfering noise. Consult your service provider or the manufacturer of this phone for information on hearing aid compatibility. If you have questions about return or exchange policies, consult your service provider or phone retailer. This device is marked HAC showing compliance with the applicable requirements of FCC Part 68. Radio Frequency Interference Requirements-FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help. Radio Frequency Interference Requirements - Canada Innovation, Science and Economic Development Canada ICES-003 Compliance Label: CAN ICES-3

(B)/NMB-3(B) Radio Transmitters This device complies with Industry Canada's licence-

exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radio lectrique subi mme si le brouillage est susceptible d'en compromettre le fonctionnement. Marking and European Economic Area (EEA) The use of 5 GHz RLAN throughout the EEA has the following restrictions:

5.15 - 5.35 GHz is restricted to indoor use only. Statement of Compliance Zebra hereby declares that this radio equipment is in compliance with Directives 2014/53/EU and 2011/65/

EU. The full text of the EU Declaration of Conformity is available at the following internet address: zebra.com/

doc. Hong Kong In accordance with HKTA1039, the band 5.15GHz -

5.35GHz is for indoor operation only. Korea Warning Statement for Class B ITE India B

(B)

. Other Countries Brazil Este equipamento no tem direito proteo contra interferncia prejudicial e no pode causar interferncia em sistemas devidamente autorizados. Chile Este equipo cumple con la Resolucin No 403 de 2008, de la Subsecretaria de telecomunicaciones, relativa a radiaciones electromagnticas. Conforme a Resolucin 755 parte j.1), se ajustar el dispositivo a operar en interiores en las siguientes bandas con una potencia mxima radiada no superior a 150mW:

2.400 a 2.483,5 MHz 5.150 a 5.250MHz 5.250 a 5.350MHz 5.470 a 5.725MHz 5.725 a 5.850MHz Adems, de acuerdo con Resolucin 755, para la banda 5.150 a 5.250 MHz la operacin del equipo estar restringida al interior de inmuebles y la densidad de potencia radiada mxima no exceder 7,5mW/MHz en cualquier banda de 1MHz o su valor equivalente de 0,1875mW/25 kHz en cualquier banda de 25 kHz. Para la tecnologa NFC en la banda 13.553 a 13.567 kHz, la intensidad de campo elctrico no exceder 20 mV/m a 30 metros, conforme a Resolucion 755 parte Art 1. e). China www.zebra.com/support

Eurasian Customs Union EAC. Mexico Taiwan The sending and receiving of texts is supported in the following Indian languages:

Assamese, Bengali, Gujarati, Hindi, Kannada, Kashmiri, Konkani, Malayalam, Manipuri, Marathi, Nepali, Oriya, Punjabi, Sanskrit, Sindhi, Tamil, Telugu, Urdu, Bodo, Santhali, Maithili, and Dogri. La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada.

/ 9 13 Ukraine 1057, 2008

. Waste Electrical and Electronic Equipment

(WEEE) English: For EU Customers: All products at the end of their life must be returned to Zebra for recycling. For information on how to return product, please go to:

www.zebra.com/weee. Franais: Clients de l'Union Europenne: Tous les produits en fin de cycle de vie doivent tre retourns Zebra pour recyclage. Pour de plus amples informations sur le retour de produits, consultez :

www.zebra.com/weee. Espaol: Para clientes en la Unin Europea: todos los productos debern entregarse a Zebra al final de su ciclo de vida para que sean reciclados. Si desea ms informacin sobre cmo devolver un producto, visite:

www.zebra.com/weee. Thailand Bulgarish: :

Zebra .

: www.zebra.com/weee. Deutsch: Fr Kunden innerhalb der EU: Alle Produkte mssen am Ende ihrer Lebensdauer zum Recycling an Zebra zurckgesandt werden. Informationen zur Rcksendung von Produkten finden Sie unter www.zebra.com/weee. Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono essere restituiti a Zebra al fine di consentirne il riciclaggio. Per informazioni sulle modalit di restituzione, visitare il seguente sito Web:

www.zebra.com/weee. Portugus: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos Zebra para reciclagem. Para obter informaes sobre como devolver o produto, visite: www.zebra.com/weee. Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar Zebra te worden teruggezonden voor recycling. Raadpleeg www.zebra.com/weee voor meer informatie over het terugzenden van producten. Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji naley zwrci do firmy Zebra w celu ich utylizacji. Informacje na temat zwrotu produktw znajduj si na stronie internetowej www.zebra.com/weee. etina: Pro zkaznky z EU: Vechny produkty je nutn po skonen jejich ivotnosti vrtit spolenosti Zebra k recyklaci. Informace o zpsobu vrcen produktu najdete na webov strnce: www.zebra.com/

weee. Eesti: EL klientidele: kik tooted tuleb nende eluea lppedes tagastada taaskasutamise eesmrgil Zebra'ile. Lisainformatsiooni saamiseks toote tagastamise kohta klastage palun aadressi:

www.zebra.com/weee. Magyar: Az EU-ban vsrlknak: Minden tnkrement termket a Zebra vllalathoz kell eljuttatni jrahasznosts cljbl. A termk visszajuttatsnak mdjval kapcsolatos tudnivalkrt ltogasson el a www.zebra.com/weee weboldalra. Svenska: Fr kunder inom EU: Alla produkter som uppntt sin livslngd mste returneras till Zebra fr tervinning. Information om hur du returnerar produkten finns p www.zebra.com/weee. Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrtettvksi Zebra-

yhtin, kun tuotetta ei en kytet. Listietoja tuotteen palauttamisesta on osoitteessa www.zebra.com/weee. Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til recirkulering, nr de er udtjent. Ls oplysningerne om returnering af produkter p:

www.zebra.com/weee.

, Zebra .

, www.zebra.com/weee . Malti: Gal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aar tal-ajja ta' l-uu taghom, iridu jiu rritornati gand Zebra gar-riikla. Gal aktar tagrif dwar kif gandek tirritorna l-prodott, jekk jogbok ur:

www.zebra.com/weee. Romnesc: Pentru clienii din UE: Toate produsele, la sfritul duratei lor de funcionare, trebuie returnate la Zebra pentru reciclare. Pentru informaii despre returnarea produsului, accesai: www.zebra.com/

weee. Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku ivljenjske dobe vrniti podjetju Zebra za reciklao. Za informacije o vrailu izdelka obiite:

www.zebra.com/weee. Slovenina: Pre zkaznkov z krajn EU: Vetky vrobky musia by po uplynut doby ich ivotnosti vrten spolonosti Zebra na recyklciu. Bliie informcie o vrten vrobkov njdete na:

www.zebra.com/weee. Lietuvi: ES vartotojams: visi gaminiai, pasibaigus j eksploatacijos laikui, turi bti grinti utilizuoti kompanij Zebra. Daugiau informacijos, kaip grinti gamin, rasite: www.zebra.com/weee. Latvieu: ES klientiem: visi produkti pc to kalpoanas ma beigm ir jnogd atpaka Zebra otrreizjai prstrdei. Lai iegtu informciju par produktu nogdanu Zebra, ldzu, skatiet:

www.zebra.com/weee. Trke: AB Mterileri iin: Kullanm sresi dolan tm rnler geri dntrme iin Zebra'ya iade edilmelidir. rnlerin nasl iade edilecei hakknda bilgi iin ltfen u adresi ziyaret edin: www.zebra.com/weee. Turkish WEEE Statement of Compliance EEE Ynetmeliine Uygundur. REVIEW ONLY

Back of the device Label location Battery room Label is located in the battery room. The label is visible to the users as they purchase the product and install the battery.

Xt. ZEBRA ZEBRA TECHNOLOGIES CORP. HOLTSVILLE, NY 11742 MODEL: TC210K PIN: XXXXXXXXXXAXK

(S)SIN: YYDDDZZ7zPSsss 00800 0 00 MFD: DDMMMYY XXxX MADE IN XXXXXX XX SVEEE25A IC: 109AN-TC210K FCC ID: UZ7TC210K ATCA ID: 1KOIPNAN210 HAC

Regulatory Engineering Date: February 16, 2020 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: FCC ID: UZ7TC210K AUTHORIZATION LETTER We, the undersigned, hereby authorize Jones Tsai in Sporton International Inc. to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Jones Tsai in Sporton International Inc. on our behalf shall have the same effect as acts of our own. If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Confidentiality Request Pursuant to the provisions of Sections 0.457 and 0.459 of Commissions rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. Block Diagram Part List Operational Description Schematic Diagram Tune-up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission s policy, in order to comply with the marketing regulations in 47 CFT 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. External Photos Internal Photos Zebra Technologies Corporation 1 Z e b r a P l a z a , | H o l t s v i l l e , N Y 1 1 7 4 2 | 1 . 6 3 1 . 7 3 8 . 2 4 0 0 p h o n e | 1 . 6 3 1 . 6 2 7 . 7 1 7 9 f a x | w w w . z e b r a . c o m Regulatory Engineering Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Label Location Attestation We attest that the label of device FCC ID: UZ7TC210K is located in the battery room. The label is visible to the users as they purchase the product and install the battery. Sincerely, Signature

_______________________________ Name and Job Title. E-mail Tel.

: Larry (Qianlin) Zhou / Regulatory Specialist

: larry.zhou@zebra.com

: 346-260-3543 Zebra Technologies Corporation 1 Z e b r a P l a z a , | H o l t s v i l l e , N Y 1 1 7 4 2 | 1 . 6 3 1 . 7 3 8 . 2 4 0 0 p h o n e | 1 . 6 3 1 . 6 2 7 . 7 1 7 9 f a x | w w w . z e b r a . c o m