|
app
s
|
Applicant Information
|
|
|
1 2 3 4 5 6 7 8
|
Effective |
2018-10-11
|
|
1 2 3 4 5 6 7 8
|
2018-09-26
|
|
1 2 3 4 5 6 7 8
|
Applicant's complete, legal business name |
Zebra Technologies Corporation
|
|
1 2 3 4 5 6 7 8
|
FCC Registration Number (FRN) |
0015642663
|
|
1 2 3 4 5 6 7 8
|
Physical Address |
1 Zebra Plaza
|
|
1 2 3 4 5 6 7 8
|
Holtsville, New York 11742
|
|
1 2 3 4 5 6 7 8
|
United States
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4 5 6 7 8
|
TCB Application Email Address |
T******@TIMCOENGR.COM
|
|
1 2 3 4 5 6 7 8
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
1 2 3 4 5 6 7 8
|
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
1 2 3 4 5 6 7 8
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4 5 6 7 8
|
Grantee Code |
UZ7
|
|
1 2 3 4 5 6 7 8
|
Equipment Product Code |
TC77HL
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4 5 6 7 8
|
Name |
L**** Z******
|
|
1 2 3 4 5 6 7 8
|
Title |
Regulatory Specialist
|
|
1 2 3 4 5 6 7 8
|
Telephone Number |
346-2********
|
|
1 2 3 4 5 6 7 8
|
Fax Number |
631-6********
|
|
1 2 3 4 5 6 7 8
|
E-mail |
L******@zebra.com
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 5 6 7 8 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 5 6 7 8 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 5 6 7 8 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 04/09/2019 |
| 1 2 3 4 5 6 7 8 | 03/25/2019 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 5 6 7 8 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 5 6 7 8 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 4 5 6 7 8 | DTS - Digital Transmission System |
| 1 2 3 4 5 6 7 8 | PCE - PCS Licensed Transmitter held to ear |
| 1 2 3 4 5 6 7 8 | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 4 5 6 7 8 | DXX - Part 15 Low Power Communication Device Transmitter |
| 1 2 3 4 5 6 7 8 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Touch computer |
| 1 2 3 4 5 6 7 8 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 4 5 6 7 8 | Modular Equipment Type | Does not apply |
| 1 2 3 4 5 6 7 8 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
| 1 2 3 4 5 6 7 8 | Original Equipment |
| 1 2 3 4 5 6 7 8 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 4 5 6 7 8 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 5 6 7 8 | Grant Comments | Output Power listed is the maximum combined conducted output power. SAR compliance for body-worn operating configurations is limited to the specific body-worn accessories, such as belt-clips and holsters, tested for this filing, or belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.5-cm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission conditions are 0.34 W/kg, 0.83 W/kg, 1.25 W/kg, and 1.59 W/kg, respectively. This device supports 20, 40, and 80 MHz modes.
Class II Permissive Change: Add VOIP HAC. This device supports Over-the Top (OTT) which is voice services operating over IP by pre-installed application. |
| 1 2 3 4 5 6 7 8 | Output Power listed is the maximum combined conducted output power. SAR compliance for body-worn operating configurations is limited to the specific body-worn accessories, such as belt-clips and holsters, tested for this filing, or belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.5-cm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission conditions are 0.61 W/kg, 0.29 W/kg, 0.86 W/kg, and 1.59 W/kg, respectively. This device supports 20 and 40 MHz bandwidth modes.
Class II Permissive Change: Add VOIP HAC. This device supports Over-the Top (OTT) which is voice services operating over IP by pre-installed application. |
| 1 2 3 4 5 6 7 8 | Output Power is EIRP and ERP for above and below 1 GHz, respectively, except for Part 90 LTE Band 26 emissions, which are conducted. SAR compliance for body-worn operating configurations is limited to the specific body-worn accessories, such as belt-clips and holsters, tested for this filing, or belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.5-cm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are 0.59 W/kg, 1.20 W/kg, 1.39 W/kg, and 1.59 W/kg, respectively. This device supports LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Bands 2, 4, 25, and 66; LTE of 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Band 7; LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; LTE of 5, and 10 MHz bandwidth modes for FDD LTE Bands 13, 14, and 17; LTE of 1.4, 3, 5, 10, and 15 MHz bandwidth modes for FDD LTE Band 26; and LTE of 5, 10, 15, and 20 MHz bandwidth modes for TDD LTE Bands 38 and 41. HAC Rating: M4 T3: 2011. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.
Class II Permissive Change: Add VOIP HAC. This device supports Over-the Top (OTT) which is voice services operating over IP by pre-installed application. |
| 1 2 3 4 5 6 7 8 | Output Power listed is conducted. |
| 1 2 3 4 5 6 7 8 | Output Power listed is the maximum combined conducted output power. SAR compliance for body-worn operating configurations is limited to the specific body-worn accessories, such as belt-clips and holsters, tested for this filing, or belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.5-cm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission conditions are 0.61 W/kg, 0.29 W/kg, 0.86 W/kg, and 1.59 W/kg, respectively. This device supports 20 and 40 MHz bandwidth modes. |
| 1 2 3 4 5 6 7 8 | Output Power is EIRP and ERP for above and below 1 GHz, respectively, except for Part 90 LTE Band 26 emissions, which are conducted. SAR compliance for body-worn operating configurations is limited to the specific body-worn accessories, such as belt-clips and holsters, tested for this filing, or belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.5-cm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are 0.59 W/kg, 1.20 W/kg, 1.39 W/kg, and 1.59 W/kg, respectively. This device supports LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Bands 2, 4, 25, and 66; LTE of 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Band 7; LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; LTE of 5, and 10 MHz bandwidth modes for FDD LTE Bands 13, 14, and 17; LTE of 1.4, 3, 5, 10, and 15 MHz bandwidth modes for FDD LTE Band 26; and LTE of 5, 10, 15, and 20 MHz bandwidth modes for TDD LTE Bands 38 and 41. HAC Rating: M4 T3: 2011. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations. |
| 1 2 3 4 5 6 7 8 | Output Power listed is the maximum combined conducted output power. SAR compliance for body-worn operating configurations is limited to the specific body-worn accessories, such as belt-clips and holsters, tested for this filing, or belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.5-cm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission conditions are 0.34 W/kg, 0.83 W/kg, 1.25 W/kg, and 1.59 W/kg, respectively. This device supports 20, 40, and 80 MHz modes. |
| 1 2 3 4 5 6 7 8 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 5 6 7 8 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4 5 6 7 8
|
Firm Name |
SPORTON International Inc.
|
|
1 2 3 4 5 6 7 8
|
Name |
A******** C********
|
|
1 2 3 4 5 6 7 8
|
Telephone Number |
886-3******** Extension:
|
|
1 2 3 4 5 6 7 8
|
Fax Number |
886-3********
|
|
1 2 3 4 5 6 7 8
|
E-mail |
a******@sporton.com.tw
|
|