all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 4 5 6 7 |
|
User Manaul | Users Manual | 754.89 KiB | ||||
1 2 3 4 5 6 7 |
|
User Manual Part 1 | Users Manual | 4.31 MiB | December 11 2012 | |||
1 2 3 4 5 6 7 |
|
User Manual Part 2 | Users Manual | 4.93 MiB | December 11 2012 | |||
1 2 3 4 5 6 7 |
|
User Manual Statements | Users Manual | 890.42 KiB | December 11 2012 | |||
1 2 3 4 5 6 7 | Cover Letter(s) | |||||||
1 2 3 4 5 6 7 |
|
Cover Letter - Agent Authorization | Cover Letter(s) | 71.60 KiB | ||||
1 2 3 4 5 6 7 | RF Exposure Info | |||||||
1 2 3 4 5 6 7 | Test Report | |||||||
1 2 3 4 5 6 7 | Test Setup Photos | |||||||
1 2 3 4 5 6 7 |
|
Test Setup Photo | Test Setup Photos | 200.98 KiB | ||||
1 2 3 4 5 6 7 | Cover Letter(s) | |||||||
1 2 3 4 5 6 7 | Cover Letter(s) | |||||||
1 2 3 4 5 6 7 | RF Exposure Info | June 07 2015 | ||||||
1 2 3 4 5 6 7 | Test Report | June 07 2015 | ||||||
1 2 3 4 5 6 7 | Cover Letter(s) | December 11 2012 | ||||||
1 2 3 4 5 6 7 | Cover Letter(s) | December 11 2012 | ||||||
1 2 3 4 5 6 7 | External Photos | December 11 2012 | ||||||
1 2 3 4 5 6 7 | External Photos | December 11 2012 | ||||||
1 2 3 4 5 6 7 | Internal Photos | December 11 2012 | ||||||
1 2 3 4 5 6 7 | Internal Photos | December 11 2012 | ||||||
1 2 3 4 5 6 7 | ID Label/Location Info | December 11 2012 | ||||||
1 2 3 4 5 6 7 | RF Exposure Info | December 11 2012 | ||||||
1 2 3 4 5 6 7 | RF Exposure Info | December 11 2012 | ||||||
1 2 3 4 5 6 7 | Test Report | December 11 2012 | ||||||
1 2 3 4 5 6 7 | Test Report | December 11 2012 | ||||||
1 2 3 4 5 6 7 | Test Report | December 11 2012 | ||||||
1 2 3 4 5 6 7 | Test Report | December 11 2012 | ||||||
1 2 3 4 5 6 7 | Test Setup Photos | December 11 2012 | ||||||
1 2 3 4 5 6 7 | Test Setup Photos | December 11 2012 | ||||||
1 2 3 4 5 6 7 | Test Setup Photos | December 11 2012 |
1 2 3 4 5 6 7 | User Manaul | Users Manual | 754.89 KiB |
WT41N0 REGULATORY GUIDE Zebra reserves the right to make changes to any product to improve reliability, function, or design. Zebra does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, apparatus, machine, material, method, or process in which Zebra products might be used. An implied license exists only for equipment, circuits, and subsystems contained in Zebra products. Warranty For the complete Zebra hardware product warranty statement, go to:
http://www.zebra.com/warranty. Service Information If you have a problem using the equipment, contact your facilitys Technical or Systems Support. If there is a problem with the equipment, they will contact the Zebra Support at: http://
www.zebra.com/support. For the latest version of this guide go to: http://www.zebra.com/
support. Zebra Technologies Corporation Lincolnshire, IL U.S.A. http://www.zebra.com Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. 2015 ZIH Corp and/or its affiliates. All rights reserved. 72-159559-04 Rev. A May 2015 Regulatory Information This guide applies to the following Model Numbers: WT41N0. All Zebra devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Local language translations are available at the following website: http://www.zebra.com/support. Any changes or modifications to Zebra equipment, not expressly approved by Zebra, could void the user's authority to operate the equipment. CAUTION Only use Zebra approved and UL Listed accessories, battery packs and battery chargers. Do NOT attempt to charge damp/wet mobile computers or batteries. All components must be dry before connecting to an external power source. Declared maximum operating temperature: 50C. Radio Modules The device contain approved radio module(s). These module(s) are identified below. Zebra XWing 2 802.11a/b/g/n radio module, Type: 21-
148603-0B Bluetooth Wireless Technology This is an approved Bluetooth product. For more information or to view the End Product Listing, please visit http://
www.bluetooth.org/tpg/listings.cfm. Wireless Devices Country Approvals Regulatory markings, subject to certification, are applied to the device signifying the radio(s) is/are approved for use in the following countries: United States, Canada, Japan, China, S. Korea, Australia, and Europe 1. Please refer to the Zebra Declaration of Conformity (DoC) for details of other country markings. This is available at http://
www.zebra.com/doc. Note 1: For 2.4GHz or 5GHz Products: Europe includes, Austria, Belgium, Bulgaria, Czech Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Country Roaming This device incorporates the International Roaming feature
(IEEE802.11d) which will ensure the product operates on the correct channels for the particular country of use. Ad-Hoc Operation (2.4 GHz band) Ad-Hoc operation is limited to Channels 1-11 (2412-2462 MHz). Frequency of Operation - IC 5 GHz Only The use in the UNII (Unlicensed National Information Infrastructure) band 1 (5150 - 5250 MHz) is restricted to Indoor Use Only; any other use will make the operation of this device illegal. Industry Canada Statement:
Caution: The device for the band 5150 - 5250 MHz is only for indoor usage to reduce potential for harmful interference to co-Channel mobile satellite systems. High power radars are allocated as primary users (meaning they have priority) of 5250 - 5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices. Avertissement: Le dispositive fonctionnant dans la bande 5150 - 5250 MHz est rserv uniquement pour une utilisation l'intrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. Les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., qu'ils ont la priorit) pour les bands 5250 - 5350 MHz et 5650 - 5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. 2.4 GHz Only The available channels for 802.11 b/g operation in the US are Channels 1 to 11. The range of channels is limited by firmware. Health and Safety Recommendations Ergonomic Recommendations CAUTION In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your local Health & Safety Manager to ensure that you are adhering to your companys safety programs to prevent employee injury. Improve work procedures. Reduce or eliminate repetitive motion Maintain a neutral postures Reduce or eliminate excessive force Keep objects that are used frequently within easy reach Perform tasks at correct heights Reduce or eliminate vibration Reduce or eliminate direct pressure Provide adjustable workstations Provide adequate clearance Provide a suitable working environment Vehicle Installation RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (including safety systems). Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. An air bag inflates with great force. DO NOT place objects, including either installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result. Position your device within easy reach. Be able to access your device without removing your eyes from the road. Note: Connection to an alert device that will cause a vehicle horn to sound or lights to flash, on receipt of a call on public roads, is not permitted. IMPORTANT Before installing or using, check state and local laws regarding windshield mounting and use of equipment. For Safe Installation Do not put your phone in a location that obstructs the drivers vision or interferes with the operation of the Vehicle. Do not cover an airbag. Safety on the Road Do not take notes or use the device while driving. Jotting down a to do list or flipping through your address book takes attention away from your primary responsibility, driving safely. When driving a car, driving is your first responsibility - Give full attention to driving. Check the laws and regulations on the use of wireless devices in the areas where you drive. Always obey them. When using a wireless device behind the wheel of a car, practice good common sense and remember the following tips:
1. Get to know your wireless device and any features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road. 2. When available, use a hands free device. 3. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be hazardous. 4. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue. 5. Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations that have the potential to divert your attention from the road. 6. Use your wireless phone to call for help. Dial the Emergency services, (9-1-1 in the US, and 1-1-2 in Europe) or other local emergency number in the case of fire, traffic accident or medical emergencies. Remember, it is a free call on your wireless phone!
The call can be made regardless of any security codes and depending on a network, with or without a SIM card inserted. 7. Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call the Emergency Services, (9-1-1 in the US, and 1-1-2 in Europe) or other local emergency number, as you would want others to do for you. 8. Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-
emergency wireless number. The wireless industry reminds you to use your device /
phone safely when driving. Warnings for Use of Wireless Devices Please observe all warning notices with regard to the usage of wireless devices. Potentially Hazardous Atmospheres - Vehicles Use You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants etc. and areas where the air contains chemicals or particles (such as grain, dust, or metal powders) and any other area where you would normally be advised to turn off your vehicle engine. Safety in Aircraft Switch off your wireless device whenever you are instructed to do so by airport or airline staff. If your device offers a 'flight mode' or similar feature, consult airline staff as to its use in flight. Safety in Hospitals Wireless devices transmit radio frequency energy and may affect medical electrical equipment. Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics or healthcare facilities. These requests are designed to prevent possible interference with sensitive medical equipment. Pacemakers Pacemaker manufacturers recommended that a minimum of 15 cm (6 inches) be maintained between a handheld wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with independent research and recommendations by Wireless Technology Research. Persons with pacemakers:
Should ALWAYS keep the device more than 15 cm (6 inches) from their pacemaker when turned ON. Should not carry the device in a breast pocket. Should use the ear furthest from the pacemaker to minimize the potential for interference. If you have any reason to suspect that interference is taking place, turn OFF your device. Other Medical Devices Please consult your physician or the manufacturer of the medical device, to determine if the operation of your wireless product may interfere with the medical device. RF Exposure Guidelines Safety Information Reducing RF Exposure - Use Properly Only operate the device in accordance with the instructions supplied. International The device complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices. For information on International human exposure to electromagnetic fields refer to the Zebra Declaration of Conformity (DoC) at http://www.zebra.com/
doc. Europe Handheld Devices This device was tested for typical body-worn operation. Use only Zebra tested and approved belt-clips, holsters, and similar accessories to ensure EU Compliance. US and Canada Co-located Statement To comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must not be co-located or operating in conjunction with any other transmitter/antenna except those already approved in this filing. Handheld Devices This device was tested for typical body-worn operation. Use only Zebra tested and approved belt-clips, holsters, and similar accessories to ensure FCC Compliance. The use of third-party belt-clips, holsters, and similar accessories may not comply with FCC RF exposure compliance requirements, and should be avoided. Batteries Taiwan - Recycling EPA (Environmental Protection Administration) requires dry battery producing or importing firms in accordance with Article 15 of the Waste Disposal Act are required to indicate the recycling marks on the batteries used in sales, giveaway or promotion. Contact a qualified Taiwanese recycler for proper battery disposal. Battery Information Use only Zebra approved batteries. Accessories which have battery charging capability are approved for use with the following battery models:
Zebra BTRY-WT40IAB0E (3.7 VDC, 2330 mAh), WT40IAB0H
(3.7 VDC, 4660 mAh) Zebra rechargeable battery packs are designed and constructed to the highest standards within the industry. However, there are limitations to how long a battery can operate or be stored before needing replacement. Many factors affect the actual life cycle of a battery pack, such as heat, cold, harsh environmental conditions and severe drops. When batteries are stored over six (6) months, some irreversible deterioration in overall battery quality may occur. Store batteries at half of full charge in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of metallic parts and electrolyte leakage. When storing batteries for one year or longer, the charge level should be verified at least once a year and charged to half of full charge. Replace the battery when a significant loss of run time is detected. Standard warranty period for all Zebra batteries is one year, regardless if the battery was purchased separately or included as part of the mobile computer. For more information on Zebra batteries, please visit: http://
www.zebra.com/batterybasics Battery Safety Guidelines The area in which the units are charged should be clear of debris and combustible materials or chemicals. Particular care should be taken where the device is charged in a non commercial environment. Follow battery usage, storage, and charging guidelines found in the user's guide. Improper battery use may result in a fire, explosion, or other hazard. To charge the mobile device battery, the battery and charger temperatures must be between +32 F and +104 F (0 C and +40 C). Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present a risk of fire, explosion, leakage, or other hazard. If you have any questions about the compatibility of a battery or a charger, contact Zebra support. To enable authentication of an approved battery, as required by IEEE1725 clause 10.2.1, all batteries will carry a Zebra hologram. Do not fit any battery without checking it has the Zebra authentication hologram. For devices that utilize a USB port as a charging source, the device shall only be connected to products that bear the USB-IF logo or have completed the USB-IF compliance program. Do not disassemble or open, crush, bend or deform, puncture, or shred. Severe impact from dropping any battery-operated device on a hard surface could cause the battery to overheat. Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals. Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, or expose to fire, explosion, or other hazard. Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle or near a radiator or other heat source. Do not place battery into a microwave oven or dryer. Battery usage by children should be supervised. Please follow local regulations to promptly dispose of used re-chargeable batteries. Do not dispose of batteries in fire. Seek medical advice immediately if a battery has been swallowed. In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with large amounts of water and seek medical advice. If you suspect damage to your equipment or battery, contact Zebra support to arrange for inspection. Radio Frequency Interference Requirements-
FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help. Radio Transmitters (Part 15) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radio Frequency Interference Requirements
- Canada This Class B digital apparatus complies with Canadian ICES-
003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Radio Transmitters For RLAN Devices:
The use of 5 GHz RLAN's, for use in Canada, have the following restrictions:
Restricted Band 5.60 - 5.65 GHz This device complies with RSS 210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes:
(1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Label Marking: The Term IC: before the radio certification only signifies that Industry Canada technical specifications were met. Marking and European Economic Area
(EEA) Frequency of Operation The use of 2.4 GHz RLAN's, for use through the EEA, have the following restrictions:
Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 - 2.4835 GHz. Bluetooth Wireless Technology for use through the EEA has the following restrictions:
Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 - 2.4835 GHz. Statement of Compliance Zebra hereby, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC and 2011/65/EU. A Declaration of Conformity may be obtained from http://www.zebra.com/doc. Japan (VCCI) - Voluntary Control Council for Interference Class B ITE B Korea Warning Statement for Class B ITE B
(
(B )
, .
) Other Countries Australia Use of 5 GHz RLAN's in Australia is restricted in the following band 5.50 - 5.65GHz. Brazil Declaraes Regulamentares para Nota: A marca de certificao se aplica ao Transceptor, modelo WT41N0. Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Para maiores informaes sobre ANATEL consulte o site:
www.anatel.gov.br. Chile Este equipo cumple con la Resolucin No 403 de 2008, de la Subsecretaria de telecomunicaciones, relativa a radiaciones electromagnticas. China Quality Certificate in Chinese when the factory has ISO 9001 certification. Quality Certificate Mexico Restrict Frequency Range to: 2.450 - 2.4835 GHz. South Korean
Taiwan
Software Support Zebra wants to ensure that customers have the latest release of entitled software at the time of product purchase. To confirm that your Zebra device shipped with the latest release of entitled software, visit: www.zebra.com/support. Check for the latest software from Software Downloads > Product Line/Product > Go. If your device does not have the latest entitled software release as of your product purchase date, please e-mail a request to Zebra at:
entitlementservices@zebra.com. You must include the following essential device information with your request:
Model number Serial number Proof of purchase Title of the software download you are requesting. If it is determined by Zebra that your device is entitled to the latest software release, you will receive an e-mail containing a link directing you to a Zebra Web site to download the appropriate software. Open Source Software Information For instructions on how to obtain a copy of any source code being made Open Source by Zebra related to software used in this Zebra Product you may send your request in writing to:
Zebra Technologies Corporation Open Source Software Management One Motorola Plaza, Holtsville, NY 11742, U.S.A. In your request, please include the Zebra Product Name and Version, along with the Open Source Software specifics, such as the Open Source Software Name and Version. Note, the source code for the Open Source Software may be resident on the Zebra Product Installation Media, or on supplemental Zebra Product Media. Please reference and review the entire Zebra Open Source Software Legal Notices and End User License Agreement for the details on location and methods of obtaining the source code. Note, dependent on the license terms of the Open Source Software, source code may not be provided. Please reference and review the entire Zebra Open Source Software Legal Notices and End User License Agreement for identifying which Open Source Software Packages will have source code provided. To view additional information regarding licenses, acknowledgements and required copyright notices for open source packages used in this Zebra product, select Start >
Control Panel > Legal information. Waste Electrical and Electronic Equipment
(WEEE) English: For EU Customers: All products at the end of their life must be returned to Zebra for recycling. For information on how to return product, please go to: http://www.zebra.com/weee Franais : Clients de l'Union Europenne : Tous les produits en fin de cycle de vie doivent tre retourns Zebra pour recyclage. Pour de plus amples informations sur le retour de produits, consultez : http://www.zebra.com/
weee. Espaol: Para clientes en la Unin Europea: todos los productos debern entregarse a Zebra al final de su ciclo de vida para que sean reciclados. Si desea ms informacin sobre cmo devolver un producto, visite: http://
www.zebra.com/weee. Bulgarish: :
Zebra .
, :
http://www.zebra.com/weee. Deutsch: Fr Kunden innerhalb der EU: Alle Produkte mssen am Ende ihrer Lebensdauer zum Recycling an Zebra zurckgesandt werden. Informationen zur Rcksendung von Produkten finden Sie unter http://www.zebra.com/weee. Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono essere restituiti a Zebra al fine di consentirne il riciclaggio. Per informazioni sulle modalit di restituzione, visitare il seguente sito Web: http://www.zebra.com/weee. Portugus: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos Zebra para reciclagem. Para obter informaes sobre como devolver o produto, visite: http://www.zebra.com/weee. Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar Zebra te worden teruggezonden voor recycling. Raadpleeg http://www.zebra.com/weee voor meer informatie over het terugzenden van producten. Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji naley zwrci do firmy Zebra w celu ich utylizacji. Informacje na temat zwrotu produktw znajduj si na stronie internetowej http://
www.zebra.com/weee. etina: Pro zkaznky z EU: Vechny produkty je nutn po skonen jejich ivotnosti vrtit spolenosti Zebra k recyklaci. Informace o zpsobu vrcen produktu najdete na webov strnce:
http://www.zebra.com/weee. Eesti: EL klientidele: kik tooted tuleb nende eluea lppedes tagastada taaskasutamise eesmrgil Zebra'ile. Lisainformatsiooni saamiseks toote tagastamise kohta klastage palun aadressi:
http://www.zebra.com/weee. Magyar: Az EU-ban vsrlknak: Minden tnkrement termket a Zebra vllalathoz kell eljuttatni jrahasznosts cljbl. A termk visszajuttatsnak mdjval kapcsolatos tudnivalkrt ltogasson el a http://www.zebra.com/weee weboldalra. Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku ivljenjske dobe vrniti podjetju Zebra za reciklao. Za informacije o vrailu izdelka obiite:
http://www.zebra.com/weee. Svenska: Fr kunder inom EU: Alla produkter som uppntt sin livslngd mste returneras till Zebra fr tervinning. Information om hur du returnerar produkten finns p http://www.zebra.com/weee. Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrtettvksi Zebra-yhtin, kun tuotetta ei en kytet. Listietoja tuotteen palauttamisesta on osoitteessa http://www.zebra.com/weee. Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til recirkulering, nr de er udtjent. Ls oplysningerne om returnering af produkter p: http://www.zebra.com/weee.
: ..: ,
, Zebra .
, http://www.zebra.com/weee . Malti: Gal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aar tal-ajja ta'
l-uu taghom, iridu jiu rritornati gand Zebra gar-riikla. Gal aktar tagrif dwar kif gandek tirritorna l-prodott, jekk jogbok ur:
http://www.zebra.com/weee. Slovenina: Pre zkaznkov z krajn EU: Vetky vrobky musia by po uplynut doby ich ivotnosti vrten spolonosti Zebra na recyklciu. Bliie informcie o vrten vrobkov njdete na:
http://www.zebra.com/weee. Lietuvi: ES vartotojams: visi gaminiai, pasibaigus j eksploatacijos laikui, turi bti grinti utilizuoti kompanij Zebra. Daugiau informacijos, kaip grinti gamin, rasite: http://www.zebra.com/weee. Latvieu: ES klientiem: visi produkti pc to kalpoanas ma beigm ir jnogd atpaka Zebra otrreizjai prstrdei. Lai iegtu informciju par produktu nogdanu Zebra, ldzu, skatiet:
http://www.zebra.com/weee. TURKISH WEEE Statement of Compliance EEE Ynetmeliine Uygundur
1 2 3 4 5 6 7 | User Manual Part 1 | Users Manual | 4.31 MiB | December 11 2012 |
WT41N0 WEARABLE TERMINAL USER GUIDE DRAFT DRAFT WT41N0 WEARABLE TERMINAL USER GUIDE 72E-159561-01 Rev. 1 February 2012 DRAFT ii WT41N0 User Guide No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from Motorola. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice. The software is provided strictly on an as is basis. All software, including firmware, furnished to the user is on a licensed basis. Motorola grants to the user a non-transferable and non-exclusive license to use each software or firmware program delivered hereunder (licensed program). Except as noted below, such license may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of Motorola. No right to copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with other program material, create a derivative work from a licensed program, or use a licensed program in a network without written permission from Motorola. The user agrees to maintain Motorolas copyright notice on the licensed programs delivered hereunder, and to include the same on any authorized copies it makes, in whole or in part. The user agrees not to decompile, disassemble, decode, or reverse engineer any licensed program delivered to the user or any portion thereof. Motorola reserves the right to make changes to any software or product to improve reliability, function, or design. Motorola does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any Motorola, Inc., intellectual property rights. An implied license only exists for equipment, circuits, and subsystems contained in Motorola products. DRAFT Revision History Changes to the original manual are listed below:
Change Date Description iii DRAFT iv WT41N0 User Guide DRAFT TABLE OF CONTENTS Revision History.............................................................................................................................. iii About This Guide Introduction ..................................................................................................................................... ix Documentation Set ................................................................................................................... ix Configurations................................................................................................................................. x Software Versions..................................................................................................................... x Chapter Descriptions ...................................................................................................................... xi Notational Conventions................................................................................................................... xi Related Documents and Software .................................................................................................. xii Service Information......................................................................................................................... xii Chapter 1: Getting Started Introduction .................................................................................................................................... 1-1 Unpacking the Wearable Terminal ................................................................................................. 1-3 Getting Started ............................................................................................................................... 1-6 Installing and Removing the Main Battery ..................................................................................... 1-6 Installing the Main Battery ........................................................................................................ 1-6 Charging the Battery ...................................................................................................................... 1-7 Charging the Main Battery and Memory Backup Battery ......................................................... 1-7 Charging Spare Batteries ......................................................................................................... 1-8 Removing the Main Battery ...................................................................................................... 1-8 Installing the Wrist Mount ............................................................................................................... 1-9 Install a Hip Mount ......................................................................................................................... 1-11 Routing an Extended Cable Scanner ....................................................................................... 1-12 Connecting a Scanner ................................................................................................................... 1-13 Starting the Wearable Terminal ..................................................................................................... 1-13 WT41N0 Boot Up ..................................................................................................................... 1-13 Voice Only WT41N0 Boot Up .................................................................................................. 1-14 Chapter 2: Using the Wearable Terminal Introduction .................................................................................................................................... 2-1 DRAFT vi WT41N0 User Guide Power Button ................................................................................................................................. 2-1 LED Indicators ............................................................................................................................... 2-2 Keypads ......................................................................................................................................... 2-4 Two-color Alphanumeric Keypad ............................................................................................. 2-4 Voice Only Keypad .................................................................................................................. 2-7 Display ........................................................................................................................................... 2-8 App Launcher Window ............................................................................................................. 2-8 Windows CE 7.0 Desktop ........................................................................................................ 2-9 Status Icons ....................................................................................................................... 2-9 Programs Menu ....................................................................................................................... 2-10 Control Panel ........................................................................................................................... 2-12 Using the Keypad to Navigate Applications ............................................................................. 2-13 Key Combinations .............................................................................................................. 2-13 Selecting Items .................................................................................................................. 2-13 Navigating Menus .............................................................................................................. 2-14 Navigating Tabs ................................................................................................................. 2-14 Navigating Fields ............................................................................................................... 2-14 Selecting Checkboxes and Radio Buttons ......................................................................... 2-15 Selecting Items in a List ..................................................................................................... 2-15 Screen Calibration ................................................................................................................... 2-15 Special Character Keypad ............................................................................................................. 2-16 Resetting the Wearable Terminal .................................................................................................. 2-17 Performing a Warm Boot ................................................................................................... 2-17 Performing a Cold Boot ...................................................................................................... 2-18 Waking the Wearable Terminal ..................................................................................................... 2-19 Battery Health ................................................................................................................................ 2-19 Chapter 3: Data Capture Introduction .................................................................................................................................... 3-1 Laser Scanning ........................................................................................................................ 3-1 Scanning Considerations ......................................................................................................... 3-1 Scanning Bar Codes ................................................................................................................ 3-2 Scanning Tips .................................................................................................................... 3-2 Scan LED Indicator .................................................................................................................. 3-2 Imaging .......................................................................................................................................... 3-3 Operational Modes ................................................................................................................... 3-3 Imager Scanning ...................................................................................................................... 3-3 Chapter 4: Wireless Applications Introduction .................................................................................................................................... 4-1 Signal Strength Icon ...................................................................................................................... 4-2 Turning Off the Radio .................................................................................................................... 4-3 Minimum Setup .............................................................................................................................. 4-3 Chapter 5: Accessories Introduction .................................................................................................................................... 5-1 Single Slot USB Cradle .................................................................................................................. 5-3 Battery Charging Indicators ..................................................................................................... 5-4 DRAFT Table of Contents vii Four Slot Ethernet Cradle .............................................................................................................. 5-5 Battery Charging ...................................................................................................................... 5-5 LED Charge Indications ........................................................................................................... 5-6 Speed LED ............................................................................................................................... 5-6 Link LED .................................................................................................................................. 5-6 Battery Charging Indicators ..................................................................................................... 5-6 Four Slot Spare Battery Charger ................................................................................................... 5-7 Spare Battery Charging with the Four Slot Spare Battery Charger .......................................... 5-7 Battery Charging Indicators ..................................................................................................... 5-7 RS409/RS419 Scanner .................................................................................................................. 5-8 RS309 Scanner .............................................................................................................................. 5-10 RS507 Imager ................................................................................................................................ 5-12 Freezer Pouch ............................................................................................................................... 5-12 Wired Headset ............................................................................................................................... 5-14 Connector Shroud .......................................................................................................................... 5-16 Assembly ................................................................................................................................. 5-16 Disconnecting the Cable from the Wearable Terminal ............................................................. 5-16 Chapter 6: Maintenance & Troubleshooting Introduction .................................................................................................................................... 6-1 Maintaining the Wearable Terminal ............................................................................................... 6-1 Wrist Mount Cleaning Instructions ........................................................................................... 6-2 Arm Sleeve Cleaning Instructions ............................................................................................ 6-2 Removing the Screen Protector ..................................................................................................... 6-2 Battery Safety Guidelines .............................................................................................................. 6-3 Cleaning ......................................................................................................................................... 6-4 Materials Required ................................................................................................................... 6-4 Cleaning the Wearable Terminal ............................................................................................. 6-4 Housing .............................................................................................................................. 6-4 Display ............................................................................................................................... 6-4 Connectors ......................................................................................................................... 6-4 Cleaning the RS309, RS409, RS419 and RS507 .................................................................... 6-5 Housing .............................................................................................................................. 6-5 Scanner Exit Window ......................................................................................................... 6-5 Connectors ......................................................................................................................... 6-5 Cleaning Cradle Connectors .................................................................................................... 6-6 Cleaning Frequency ................................................................................................................. 6-6 Troubleshooting ............................................................................................................................. 6-7 Wearable Terminal ................................................................................................................... 6-7 Four Slot Ethernet Cradle ........................................................................................................ 6-11 Four Slot Spare Battery Charger ............................................................................................. 6-12 Single Slot USB Cradle ............................................................................................................ 6-13 Appendix A: Specifications Technical Specifications ................................................................................................................ A-1 Wearable Terminal ................................................................................................................... A-1 RS309 Scanner ........................................................................................................................ A-3 RS409 Scanner ........................................................................................................................ A-4 RS419 Scanner ........................................................................................................................ A-5 DRAFT viii WT41N0 User Guide RS507 Scanner ........................................................................................................................ A-6 Glossary Index DRAFT ABOUT THIS GUIDE Introduction This guide provides information about using the WT41N0 family of mobile terminals and accessories. The WT41N0 has two versions, one with a display and a voice only version without a display. Throughout this guide Voice Only WT41N0 refers to the version without the display and WT41N0 refers to the version with a display. NOTE Screens and windows pictured in this guide are samples and can differ from actual screens. Documentation Set The documentation set for the WT41N0 is divided into guides that provide information for specific user needs. WT41N0 Quick Start Guide -
Voice Only WT41N0 Quick Start Guide -
WT41N0 User Guide - describes how to use the WT41N0 wearable terminal. WT41N0 Integrator Guide - describes how to set up the WT41N0 wearable terminal and the accessories. EMDK Help File - provides API information for writing applications. DRAFT x WT41N0 User Guide Configurations This guide covers the following configurations:
Configuration Radios Display Memory WT41N0 WLAN:
802.11a/b/g/n WPAN: Bluetooth Voice Only WT41N0 WLAN:
802.11a/b/g/n WPAN: Bluetooth Software Versions 2.8 QVGA Color;
non-touch 2.8 QVGA Color;
touch None Data Capture Optional accessory 2 GB Flash/
512 MB RAM 2 GB Flash/
512 MB RAM Optional accessory 2 GB Flash/
512 MB RAM Optional accessory Operating System Windows CE 7.0 Professional Windows CE 7.0 Professional Windows CE 7.0 Professional Keypads Two-color Alphanumeric Keypad Two-color Alphanumeric Keypad Three programmable keys NOTE To view the software versions on the Voice Only WT41N0, the Voice Only WT41N0 must be connected to a host computer running remote desktop software. Refer to the WT41N0 Integrator Guide for more information. This guide covers various software configurations and references are made to operating system or software versions for:
OEM version Fusion version. OEM Software To determine the OEM software version:
1. Press CTRL and then ESC to open the Start menu. 2. Using the navigation keys, select Settings. 3. Press the Blue key and the down arrow to open the Control Panel sub-menu. 4. Press ENTER key to launch Control Panel. 5. Using the navigation keys, select the System Information icon. 6. Press ENTER key to launch System Information applet. DRAFT About This Guide xi Fusion Software To determine the Fusion software version:
1. Press ALT - w. The Wireless menu appears. 2. Using the navigation keys, select Wireless Status. 3. Press ENTER. The Wireless Status window displays. 4. Press 5. The Versions screen appears. Chapter Descriptions Topics covered in this guide are as follows:
Chapter 1, Getting Started, provides information on getting the wearable terminal up and running for the first time. Chapter 2, Using the Wearable Terminal, explains how to use the wearable terminal. This includes instructions for powering on and resetting the wearable terminal, entering and capturing data. Chapter 5, Accessories, describes the accessories available for the wearable terminal and how to use the accessories with the wearable terminal. Chapter 6, Maintenance & Troubleshooting, includes instructions on cleaning and storing the wearable terminal, and provides troubleshooting solutions for potential problems during wearable terminal operation. Appendix A, Specifications, includes a table listing the technical specifications for the wearable terminal. Notational Conventions The following conventions are used in this document:
Wearable terminal refers to the WT41N0 series of wearable terminals. Italics are used to highlight the following:
Chapters and sections in this guide Related documents DRAFT xii WT41N0 User Guide Bold text is used to highlight the following:
Dialog box, window and screen names Drop-down list and list box names Check box and radio button names Key names on a keypad Button names on a screen. Icons on a screen Bullets () indicate:
Action items Lists of alternatives Lists of required steps that are not necessarily sequential. Sequential lists (e.g., those that describe step-by-step procedures) appear as numbered lists. Related Documents and Software The following documents provide more information about the WT41N0 wearable terminals. WT41N0 Quick Start Guide, p/n 72-157178-xx Voice Only WT41N0 Quick Start Guide, p/n 72-xxxxxx-xx WT41N0 Regulatory Guide, p/n 72-159559-xx WT41N0 Integrator Guide, p/n 72E-160600-xx RS309 Scanner Quick Reference Guide, p/n 72-86011-xx RS409 Scanner Quick Reference Guide, p/n 72-86010-xx RS419 Scanner Quick Reference Guide, p/n 72-86010-xx RS507 Hands-free Imager Quick Reference Guide, p/n 72-115987-xx RS507 Hands-free Imager Product Reference Guide, p/n 72E-120802-xx Wireless Fusion Enterprise Mobility Suite User Guide for Version 1.XX, p/n 72E-xxxxxx-xx Enterprise Mobility Developer Kits, available at: http://www.motorola.com/enterprisemobility/support. Device Configuration Package (DCP for WT41N0c50) and Platform SDK (PSDK9090c70) for WT41N0 with Windows CE 7.0, available at: http://www.motorola.com/enterprisemobility/support. ActiveSync software, available at: http://www.microsoft.com. For the latest version of this guide and all guides, go to: http://www.motorola.com/enterprisemobility/manuals. Service Information If you have a problem with your equipment, contact Motorola Enterprise Mobility support for your region. Contact information is available at: http://www.motorola.com/enterprisemobility/contactsupport. When contacting Enterprise Mobility support, please have the following information available:
Serial number of the unit DRAFT About This Guide xiii Model number or product name Software type and version number Motorola responds to calls by email, telephone or fax within the time limits set forth in support agreements. If your problem cannot be solved by Motorola Enterprise Mobility Support, you may need to return your equipment for servicing and will be given specific directions. Motorola is not responsible for any damages incurred during shipment if the approved shipping container is not used. Shipping the units improperly can possibly void the warranty. If you purchased your Enterprise Mobility business product from a Motorola business partner, contact that business partner for support. DRAFT xiv WT41N0 User Guide DRAFT CHAPTER 1 GETTING STARTED Introduction This chapter lists the parts and accessories for the wearable terminal and explains how to install and charge the batteries and start the wearable terminal for the first time. Display Application Keypad Action Keypad Figure 1-1 WT41N0 Wearable Terminal Front View Power Button Charge Status LED Microphone Data Entry Keypad Speaker DRAFT 1 - 2 WT41N0 User Guide Application Controlled LED Battery Status LED WLAN Status LED Power Button Charge Status LED Speaker Action Keypad Figure 1-2 Voice Only WT41N0 Wearable Terminal Front View Interface Connector Rubber Plug Battery Battery Release Cleat Interface Connector
(shown without Rubber Plug) Cradle Connector Figure 1-3 Wearable Terminal Back View Table 1-1 Parts of the Wearable Terminal Item Display Power Button Description Displays the application and data stored on the device. (WT41N0 only) Places the wearable terminal in to the suspend mode or resumes normal operation. Performs a warm boot when held down for five seconds. See Resetting the Wearable Terminal on page 2-17 for information about performing a warm boot. Charge Status LED Indicates the charging status of the battery. DRAFT Getting Started 1 - 3 Table 1-1 Parts of the Wearable Terminal (Continued) Item WLAN Status LED Battery Status LED Description Indicates the status of the wireless connection. (Voice Only WT41N0 only) Indicates when the battery charge level falls below 30%. (Voice Only WT41N0 only) Application Controlled LED Application programmable. (Voice Only WT41N0 only) Microphone Speaker Keypads Battery Provides audio playback. Enable user input. Provides power to the wearable terminal. Interface Connector Provides electrical connection to an accessory, such as a scanner. Cradle Connector Battery Release Cleat Provides electrical connection to a cradle. Releases the battery for removal. Provides mounting for the wrist mount and cradles. Unpacking the Wearable Terminal Carefully remove all protective material from around the wearable terminal and save the shipping container for later storage and shipping. Verify that you received all equipment listed below:
Wearable terminal Lithium-ion battery Regulatory Guide Quick Start Guide. Inspect the equipment for damage. If you are missing any equipment or if you find any damaged equipment, contact the Motorola Solutions Global Customer Support Center immediately. See page xii for contact information. DRAFT 1 - 4 WT41N0 User Guide Scan LED Connector Rotating Scan Assembly Exit Window Ring Mount Finger Strap Figure 1-4 RS419 Scanner Scan LED Trigger Assembly Scan Trigger Exit Window Protective Cap Scan Button Trigger Cable Trigger Connector Figure 1-5 RS309 Scanner Interface Cable DRAFT Getting Started 1 - 5 Figure 1-6 RS507 Scanner DRAFT 1 - 6 WT41N0 User Guide Getting Started In order to start using the wearable terminal for the first time:
Install the main battery Charge the main battery and backup battery Install the wearable terminal onto the wrist mount Install an optional scanner Start the wearable terminal. NOTE The main battery can be charged before or after installation into the wearable terminal. Use the Single Slot USB cradle or Four Slot Spare Battery Charger to charge the main battery before installation, or the Single Slot USB cradle or Four Slot Ethernet cradle to charge the main battery after installation. Installing and Removing the Main Battery Installing the Main Battery Before using the wearable terminal, install a lithium-ion (Li-ion) battery by placing the battery into the wearable terminal as shown in Figure 1-7. NOTE Ensure the battery is fully inserted. An audible click can be heard as the battery is fully inserted. A partially inserted battery may result in unintentional data loss. When a battery is installed in a wearable terminal for the first time the wearable terminal boots and powers on automatically. Figure 1-7 Installing the Main Battery DRAFT Getting Started 1 - 7 Charging the Battery CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 6-3. Charging the Main Battery and Memory Backup Battery Before using the wearable terminal for the first time, charge the main battery until the amber Charge Status LED remains lit (see Table 1-2 on page 1-7 for charge status indications). The wearable terminal is equipped with a memory backup battery which automatically charges from the main battery whether or not the wearable terminal is operating or is in suspend mode. The memory backup battery retains data in memory for at least 30 minutes when the wearable terminal's main battery is removed or fully discharged. When the wearable terminal is used for the first time or after the memory backup battery has fully discharged, the memory backup battery requires approximately 15 hours to fully charge. Do not remove the main battery from the wearable terminal for 15 hours to ensure that the memory backup battery fully charges. If the main battery is removed from the wearable terminal or the main battery is fully discharged, the memory backup battery completely discharges in several hours. When the wearable terminal reaches a very low battery state, the combination of main battery and backup battery retains data in memory for at least 24 hours. NOTE Do not remove the main battery within the first 15 hours of use. If the main battery is removed before the backup battery is fully charged, data may be lost. Charge the wearable terminal with an installed main battery using either the Single Slot USB cradle or the Four Slot Ethernet cradle. To charge the main battery:
1. Ensure the cradle used to charge the main battery is connected to the appropriate power source. 2. Insert the wearable terminal into a cradle. 3. The wearable terminal starts to charge automatically. The amber Charge Status LED lights to indicate the charge status. See Table 1-2 for charging indications. The standard capacity battery fully charges in less than four hours and the extended battery fully charges in less than eight hours. Table 1-2 Wearable Terminal LED Charge Indicators LED Off Fast Blinking Amber Indication Wearable terminal is not in cradle. Wearable terminal not placed correctly. Charger is not powered. Charging error:
Temperature is too low or too high. Charging has gone on too long without completing (typically eight hours). Slow Blinking Amber Wearable terminal is charging. Solid Amber Charging complete. Note: When the battery is initially inserted in the wearable terminal, the amber LED flashes once if the battery power is low or the battery is not fully inserted. DRAFT 1 - 8 WT41N0 User Guide Charging Spare Batteries Use the following accessories to charge spare batteries:
Single Slot USB Cradle Four Slot Spare Battery Charger. To charge a spare battery:
1. Ensure the accessory used to charge the spare battery is connected to the appropriate power source. 2. Insert the spare battery into the accessorys spare battery charging slot with the charging contacts facing down (over the charging pins) and gently press down on the battery to ensure proper contact. 3. The battery starts to charge automatically. The amber charge LED on the accessory lights to show the charge status. See Chapter 5, Accessories for accessory charge LED indicator definitions. The standard capacity battery fully charges in less than four hours and the extended capacity battery fully charges in less than eight hours. Removing the Main Battery To remove the main battery:
1. Prior to removing the battery, ensure that the wearable terminal is in suspend mode. If the wearable terminal is not in suspend mode, press the Power button to place the wearable terminal in suspend mode. 2. Press the battery release button. The battery partially ejects from the wearable terminal. 3. Remove the battery from the wearable terminal. Battery Release Figure 1-8 Removing the Main Battery DRAFT Getting Started 1 - 9 Installing the Wrist Mount The wrist mount provides the mounting of the wearable terminal on the forearm for hands-free applications. Refer to the Wrist Mount Installation Guide for information on the wrist mount. Mounting Bracket Release Lever Figure 1-9 Wrist Mount To install the wrist mount:
1. Determine which arm the wrist mount will be used on. 2. 3. Install the short strap on the end closest to the wrist. Install the long strap on the other end. 4. Slide the hand into the wrist mount. 5. Tighten the straps. 6. Align the cleat on the back of the wearable terminal with the mounting bracket on the wrist mount. Mounting Bracket Figure 1-10 Aligning the Cleat 7. Slide the wearable terminal onto the wrist mount until it clicks into place. 8. If necessary, loosen and re-tighten the straps. DRAFT 1 - 10 WT41N0 User Guide Figure 1-11 Wearable Terminal and Wrist Mount To remove the wearable terminal from the wrist mount, press down on the release lever and slide the wearable terminal out. Release Lever Figure 1-12 Wearable Terminal Removal DRAFT Getting Started 1 - 11 Install a Hip Mount The hip mount allows the user to mount the wearable terminal on the hip for use in voice picking applications. An RS309, RS409 or RS419 scanner with an extended cable is required when using the hip mount. Slide the wearable terminal into the hip mount. Figure 1-13 Insert Wearable Terminal into Hip Mount Close the front flap followed by the back flap. Figure 1-14 Close Hip Mount Flaps Slide a belt through the belt loop on the back of the hip mount. The wearable terminal can be mounted right-side up or up-side down depending upon user preference or application. DRAFT 1 - 12 WT41N0 User Guide Figure 1-15 Hip Mount on Belt Connect accessories as required. Routing an Extended Cable Scanner When using an RS309, RS409 or RS419 scanner with the wearable terminal mounted on the hip, the extended cable version is required. Motorola offers for sale cable clips, which attach to clothing and hold the scanner cable so that the cable does not interfere with the user. The cable clips are similar to badge clips and can be purchased at any office supply store as well. Figure 1-16 Routing RS409/419 Scanner Cable from Hip to Hand DRAFT Getting Started 1 - 13 Figure 1-17 Routing RS309 Scanner Cable from Hip to Hand Connecting a Scanner The RS309, RS409 and RS419 scanners and the RS507 imager can be used with the wearable terminal. See RS309 Scanner on page 5-10 and RS409/RS419 Scanner on page 5-8 for procedures for connecting the scanner to the wearable terminal. Refer to the RS507 Product Reference Guide for procedures for connecting the imager to the wearable terminal. Starting the Wearable Terminal Press the Power button to turn on the wearable terminal. If the wearable terminal does not power on, perform a cold boot. See Resetting the Wearable Terminal on page 2-17. NOTE When a battery is fully inserted in a wearable terminal for the first time, upon the wearable terminals first power up, the device cold boots and powers on automatically. WT41N0 Boot Up When the WT41N0 is powered on for the first time the splash screen (Figure 1-18) appears for a short period of time followed by the Start Up window on non-touch configurations and the calibration screen on touch enabled configurations. DRAFT 1 - 14 WT41N0 User Guide Figure 1-18 Splash Screen Figure 1-19 Start Up Window Use the Calibration screen to align the touch screen:
1. Carefully press and briefly hold on the center of the Calibration screen target. Repeat the procedure as the target moves and stops at different locations on the screen. This enters the new calibration settings. Calibration Screen Figure 1-20 Calibration Screen Confirm Calibration Screen 2. Once all of the new calibration settings are input, tap the screen or press the ENTER button to save the new calibration settings. Press ESC to discard the new calibration settings. Voice Only WT41N0 Boot Up When the Voice Only WT41N0 is powered on for the first time the three LEDs on the front housing blink as follows:
1. Application Controlled LED and Battery Status LED on. 2. All LEDs Off. 3. Application Controlled LED on, Battery Status LED on, WLAN Status LED on. DRAFT 4. WLAN Status LED off, Battery Status LED off, Application Controlled LED off. The WLAN Status LED blinks indicating that the wireless connection is not connected or is solid indicating that the wireless connection is connected. Getting Started 1 - 15 DRAFT 1 - 16 WT41N0 User Guide DRAFT CHAPTER 2 USING THE WEARABLE TERMINAL Introduction This chapter explains the physical buttons and controls on the wearable terminal, and provides basic instructions for using the wearable terminal, including powering on and resetting the wearable terminal, using a headset, entering information and scanning. This chapter also details the operation of the Windows CE 7.0 operating system including the desktop, applications and settings. Depending upon the programs installed on the wearable terminal, some of these items may not be available. Power Button Press the Power button to turn the wearable terminal screen on and off (suspend mode). The wearable terminal is on when the screen is on and the wearable terminal is in suspend mode when the screen is off. For more information, see Starting the Wearable Terminal on page 1-13. Power Button Figure 2-1 Power Button The Power button is also used to reset the wearable terminal by performing a warm or cold boot. Warm Boot (Soft Reset) - Resets the wearable terminal. Cold Boot (Hard Reset) - Resets the wearable terminal, removes all added applications and restores all factory default settings. DRAFT 2 - 2 WT41N0 User Guide LED Indicators The Charge Status LED indicates the wearable terminal charging status when the WT41N0 is in a cradle. Table 2-1 describes the Charge Status LED indications. Programmable LED1 Charge Status LED Programmable LED2 Figure 2-2 Wearable Terminal LED Indicators Table 2-1 Charge Status LED Indications LED State Indication Charge Status LED
(Amber) Off Wearable terminal is not in cradle. Wearable terminal not placed correctly. Charger is not powered. Slow Blinking Amber Main battery in wearable terminal is charging. Fast Blinking Amber Solid Amber Charging error:
Temperature is too low or too high. Charging has gone on too long without completing (typically eight hours). Charging complete. Note: When the battery is initially inserted in the wearable terminal, the amber LED flashes once if the battery power is low or the battery is not fully inserted. Programmable LED1
(Light Green) Programmable LED2
(Green)
-
-
Application dependent Application dependent DRAFT Using the Wearable Terminal 2 - 3 Application Controlled LED Battery Status LED WLAN Status LED Charging Status LED Figure 2-3 Voice Only WT41N0 LED Indicators The Voice Only WT41N0 has three status LEDs. Table 2-2 lists the default LED indications. LED functionality can be changed by an application. Table 2-2 Voice Only WT41N0 LED Indications LED State Indication WLAN Status LED (Green) Off Battery Status LED (Light Green) Blinking Solid Off Blinking Application Controlled LED
(Yellow)
-
Battery completely discharged or device error. Contact system administrator. Voice Only WT41N0 is not connected to a wireless network. Voice Only WT41N0 is connected to a wireless network. Battery charge level is greater than 30%
Battery charge level is less than 30%. Application dependent. DRAFT 2 - 4 WT41N0 User Guide Keypads The wearable terminal has the following keypads:
Two-color alphanumeric keypad Voice Only keypad. Two-color Alphanumeric Keypad The two-color alphanumeric keypad contains application keys, scroll keys and function keys. The keypad is color-coded to indicate the alternate function keys (blue, orange and gray). Note that keypad functions can be changed by an application so the wearable terminals keypad may not function exactly as described. See Table 2-3 on page 2-4 for key and button descriptions and Table 2-4 on page 2-5 for the keypads special functions. Figure 2-4 Two-color Alphanumeric Keypad Table 2-3 Two-color Alphanumeric Keypad Descriptions Key Orange Gray Blue Description Press and release the Orange key to activate alphabetic characters (shown on the keypad in orange). The icon appears on the Windows CE desktop taskbar. Press and release the Gray key to activate alphabetic characters (shown on the keypad in gray). The icon appears on the Windows CE desktop taskbar. Press and release the Blue key to activate the keypad alternate functions (shown on the keypad in blue). The icon appears on the Windows CE desktop taskbar. DRAFT Using the Wearable Terminal 2 - 5 Table 2-3 Two-color Alphanumeric Keypad Descriptions (Continued) Key Scroll Keys Description Moves up or down from one item to another or increases/decreases specified values. Moves left or right from one item to another when used with the Blue key. For each left or right scroll, the Blue key must be pressed first. ESC Exits the current operation. Alphanumeric In default state, produces the numeric value on the key. In Left Alpha state, produces the lower case alphabetic characters in the orange area. In Right Alpha state, produces the lower case alphabetic characters in the gray area. When the SHIFT key is pressed in the Alpha state, the upper case alphabetic characters on the key are produced. For example, press and release the Orange key, press and release the SHIFT key and then press the 4 key once to produce the letter G. BKSP Backspace function. Space function when used with the Blue key. CTRL (Control) SHIFT Press and release the CTRL key to activate the keypad alternate CTRL functions. The icon appears on the Windows CE desktop taskbar. Press the Blue key followed by the CTRL key to activate the keypad alternate ALT functions. The icon appears on the Windows CE desktop taskbar. Press and release the SHIFT key to activate the keypad alternate SHIFT functions. The icon appears on the Windows CE desktop taskbar. ENTER Executes a selected item or function. TAB P1 P2 Move the focus to the next field in a window. Programmable key. When used with the Blue key, toggles the keypad backlight on and off. Programmable key. When used with the Blue key, toggles the display backlight on and off. The keypad is color-coded to indicate the alternate function key (blue) values and the alternate ALPHA key
(orange) values. See Table 2-4 for the special character generation. Table 2-4 Special Character Generation Map Special Character Two-color Keypad Triple-tap Keypad
/
(forward slash)
[
(open square bracket)
]
(close square bracket)
\
(Backslash)
`
(apostrophe)
,
(comma) Blue - Orange - 0 Blue - Orange - 0 Blue - Orange - 2 Blue - Orange - 2 Blue - Orange - 3 Blue - Orange - 3 Blue - Orange - 4 Blue - Orange - 4 Blue - Orange - 5 Blue - Orange - 5 Blue - Orange - 6 Blue - Orange - 6 DRAFT 2 - 6 WT41N0 User Guide Table 2-4 Special Character Generation Map (Continued) Special Character Two-color Keypad Triple-tap Keypad
.
(period)
;
(semi-colon)
=
(equal sign)
-
(dash)
!
(exclamation point)
@
(at sign)
#
(Pound sign)
$
(dollar sign)
%
(percent sign)
^
(carat)
&
(ampersand)
*
(asterisk)
(
(open parenthesis)
)
(close parenthesis)
(single quote)
(double quote)
?
(question mark)
{
(open curly bracket)
}
(close curly bracket) Blue - Orange - 7 or Orange - TAB Blue - Orange - 8 Blue - Orange - 7 Blue - Orange - 8 Blue - Orange - 9 Blue - Orange - 9 Blue - Orange - Tab Blue - Orange - Tab Shift - 1 Shift - 2 Shift - 3 Shift - 4 Shift - 5 Shift - 6 Shift - 7 Shift - 8 Shift - 9 Shift - 0 Shift - 1 Shift - 2 Shift - 3 Shift - 4 Shift - 5 Shift - 6 Shift - 7 Shift - 8 Shift - 9 Shift - 0 Blue - Orange - 1 Blue - Orange - 1 Shift - Blue - Orange - 1 Shift - Blue - Orange - 1 Shift - Blue - Orange - 0 Shift - Blue - Orange - 0 Shift - Blue - Orange - 2 Shift - Blue - Orange - 2 Shift - Blue - Orange - 3 Shift - Blue - Orange - 3 DRAFT Using the Wearable Terminal 2 - 7 Table 2-4 Special Character Generation Map (Continued) Special Character Two-color Keypad Triple-tap Keypad
|
(pipe)
~
(tilde)
<
(less than sign)
>
(greater than sign)
:
(colon)
+
(plus sign) _
(underscore) Shift - Blue - Orange - 4 Shift - Blue - Orange - 4 Shift - Blue - Orange - 5 Shift - Blue - Orange - 5 Shift - Blue - Orange - 6 Shift - Blue - Orange - 6 Shift - Blue - Orange - 7 Shift - Blue - Orange - 7 Shift - Blue - Orange - 8 Shift - Blue - Orange - 8 Shift - Blue - Orange - 9 Shift - Blue - Orange - 9 Shift - Blue - Orange - Tab Shift - Blue - Orange - Tab Voice Only Keypad The voice only keypad contains three programmable function keys. Figure 2-5 Voice Only Keypad DRAFT 2 - 8 WT41N0 User Guide Display NOTE To view the software versions on the Voice Only WT41N0, the Voice Only WT41N0 must be connected to a host computer running remote desktop software. See the WT41N0 Integrator Guide for more information. The wearable terminal is factory installed with the Windows CE 7.0 operating system. When the wearable terminal starts, it automatically launches the Start Up application. NOTE A customer specific application can be configured to automatically start-up and the Windows CE 7.0 desktop and Start Up application might not be visible or accessible. App Launcher Window NOTE App Launcher window does not automatically launch on the Voice Only WT41N0. The App Launcher window allows the user to launch specific applications by using the keypad. Either scroll up and down using the arrow keys and select Enter to select an item or press the numeric key associated with the item. If the App Launcher window is closed, launch the App Launcher window by selecting Start >
Programs > AppLauncher. Figure 2-6 Start-up Window Table 2-5 Start Up Item Descriptions Item Rapid Deployment Client Launch Number 1 Internet Explorer Utilities folder Demo Apps Exit 2 3 4 5 Description Launches the Rapid Deployment application. Refer to the WT41N0 Integrator Guide for more information. Launches the Microsoft Pocket Internet Explorer application. Opens a sub-window that contains utilities, such as: Control Panel, File Explorer, BT Connect and test applications. For more information on the Control Panel and File Explorer. Opens a sub-window that contains sample demonstration applications. Closes the Start Up window. DRAFT Using the Wearable Terminal 2 - 9 Windows CE 7.0 Desktop The following paragraphs describe the Windows CE 7.0 desktop. Depending upon the customers configuration of the wearable terminal, the desktop may not be available. Status Icons The Taskbar at the bottom of the window displays the active programs, current time, battery status and communication status. Status Icons Desktop Button Start Button Figure 2-7 Taskbar Open Program Clock Status icons are shown in the taskbar to indicate present status of the wearable terminal. Table 2-6 Status Icons Status Icon Description Indicates the current time. The clock can be toggled on and off. Select Start > Settings > Control Panel > Task and Start Menu. This icon indicates that the main battery is charging or that the wearable terminal is operating on external power. Indicates that the battery is fully charged and the wearable terminal is running on external power. This icon is displayed when the memory backup battery level is low. Charge the battery. This icon indicates that the battery is fully charged (100% charged). The battery status icons provide the battery status in 10% increments from 10% to 100%. This displays when the terminal is connected to a host computer with ActiveSync. DRAFT 2 - 10 WT41N0 User Guide Table 2-6 Status Icons (Continued) Status Icon Description Wireless connection status icon. Indicates WLAN signal strength. Bluetooth radio is on. Bluetooth radio is off. Bluetooth radio is connected to another Bluetooth device. Indicates that the SHIFT key is selected. Indicates that the Blue key is selected. Indicates that the CTRL key is selected. Indicates that the ALT key is selected. Indicates that the Orange key is selected. Indicates that the Gray key is selected. Indicates that the Motorola Remote Control software is connected to the wearable terminal. Programs Menu NOTE For the non-touch configurations, see ????? for instruction on navigating using the navigation pad. From the Start menu, tap Programs to open the Programs menu. The programs installed on the wearable terminal with Windows CE display in the Programs menu. DRAFT Using the Wearable Terminal 2 - 11 Table 2-7 Applications in the Programs Menu Icon Description Icon Description AppLauncher:
BTScannerCtlPanel:
Internet Explorer Microsoft WordPad MotoBTUI Command Prompt: Opens a DOS command prompt window. MSP Agent: Interacts with MSP agents to collect monitoring and asset information to enable the configuration, provisioning, monitoring and troubleshooting of the wearable terminal. Refer to the WT41N0 Integrator Guide for more information. Samples: Opens the Sample Applications window, when installed. WarmBoot: Warm boots the wearable terminal. Fusion Folder: Open the Wireless Companion folder. See Chapter 5, Wireless Applications for more information. CtlPanel: View and change wearable terminal settings such as: Scanner Parameters, Display Settings, Audio Settings, Printer Settings, Date and Time Settings, Touch Screen Settings, etc. Rapid Deployment Client: Facilitates software downloads from a Mobility Services Platform Console FTP server to the wearable terminal. Refer to the WT41N0 Integrator Guide for more information. Music Player Remote Desktop Connection Windows Explorer: Organize and manage files on your device. DRAFT 2 - 12 WT41N0 User Guide Control Panel Table 2-8 lists the applications in the Control Panel. Table 2-8 Programs on the Control Panel Icon Description Icon Description Backlight: Adjust the backlight brightness and power settings. Bluetooth Device Properties: Launch the Bluetooth application. Certificates: See information about certificates installed on the wearable terminal. Date/Time: Change date, time and time zone information. Display: Change desktop background, appearance, backlight and brightness. Internet Options:
Keyboard: Change keyboard repeat delay and rate. Mouse: Adjust double-click sensitivity for both the speed and timing. Owner: Change owners personal profiles. DataWedge: Sample scanning application. See Chapter 3, Data Capture for more information. Dialing: Set dialing properties for modem communication and change telephony settings. Input Panel: Switch input methods and set input options. IST Settings:
Keylight:
Network and Dial-up Connections:
Connect to other computers, networks and the Internet using a modem. Password: Set a password for the wearable terminal. PC Connection: Change settings for connectivity of a host computer. Power: View and control wearable terminal power settings. Regional Settings: Change how numbers, currencies, dates and times appear. Stylus: Calibrate the touch screen and adjust double-tap timing. System Info: View information on the wearable terminals system components. Volume & Sounds: Select the type of actions for which to hear sounds and customize notifications for different events. Remove Programs: Remove programs installed on the wearable terminal. System: View system information and change memory settings. USBConfig: Configure the wearable terminal USB port. DRAFT Using the Wearable Terminal 2 - 13 Using the Keypad to Navigate Applications NOTE Not available on the Voice Only configuration. On wearable computers without touch-enabled screens navigation and control of an application is performed using the keypad. Key Combinations The wearable terminal uses special key combinations to easily navigate applications. Table 2-9 lists the key combinations required to perform various application navigation and control functions. Table 2-9 Key Combinations Action Key Access the Start menu on the taskbar Switch fields within an application Combination CTRL - ESC TAB Close windows or cancel operations on some applications ESC or ALT - F4 Access the Task Manager Switches to the next window or desktop Access a menu bar in an application ALT - TAB ALT - ESC ALT - ALT Press a button or select a check box in an application TAB until the item is highlighted then SPACE. Display a pop-up context menu ALT - ENTER Throughout this guide you will be instructed to select an item. You must use a key combination to select that item. For example:
To perform:
Select Start > Programs > Windows Explorer 1. Press CTRL and then ESC to open the Start menu. 2. Press the up arrow until the Programs item is highlighted. 3. Press the Blue key and the down arrow to open the Programs sub-menu. 4. Press the down arrow until Windows Explorer is highlighted. 5. Press ENTER key to launch Windows Explorer. Selecting Items When using the navigation keys to perform tasks in an application, the active item is highlighted using either a color background and/or a dashed box. DRAFT 2 - 14 WT41N0 User Guide Highlighted Item Figure 2-8 Highlighted Items Navigating Menus Most applications have drop-down menus to perform specific functions. Use the key combination ALT - ALT to open a menu. Once the menu is open, use the up and down navigation keys to move up and down the menu and use the left and right navigation keys to move to the next menu item or open a sub-menu. When moving through a menu, items are highlighted. Once an item is highlighted, press the ENTER key to select that item. Figure 2-9 Navigating Menus Navigating Tabs Some applications contain multiple pages with tabs indicating each page. Use the TAB key to highlight the tab. A dashed box appears around the tab name. Use the left and right navigation keys to move to the next or previous tab. Selected Tab Figure 2-10 Navigating Tabs Navigating Fields To navigate from one field to another, press the TAB key. Repeated pressing of the TAB key cycles the highlighted cursor through the fields in the window. DRAFT Using the Wearable Terminal 2 - 15 Selecting Checkboxes and Radio Buttons To select or deselect checkboxes and radio buttons press the TAB key until the field is highlighted. Press ALT -
BKSP (SPACE) to select or deselect the checkbox or radio button. Highlighted Checkbox Radio Buttons Figure 2-11 Selecting a Checkbox or Radio Button Selecting Items in a List Use a combination of key sequences to select items in a folder or list. To select continuous items in a folder or list:
1. Open the folder or list. 2. Use the scroll keys to move to the first item to select. 3. Press SHIFT - scroll key (either up or down) to select the next item. 4. Repeat the SHIFT - scroll key combination to select remaining items. 5. Perform the desired function. To select multiple items in a folder or list:
1. Open the folder or list. 2. Use the scroll keys to move to the first item. 3. Press CTRL - scroll key to move within the list. The item name is outlined. 4. Repeat step 3 to move to the desired item. 5. Press SPACE to highlight the item. 6. Repeat steps 3 through 5 until all items are selected. 7. Perform the desired function. Screen Calibration NOTE Not available on the Voice Only and non-touch configurations. To calibrate the touch screen so the cursor on the touch screen aligns with screen taps:
1. Press Start > Settings > Control Panel > Stylus icon > Calibration tab > Recalibrate button. 2. Carefully press and briefly hold on the center of the Calibration screen target. Repeat the procedure as the target moves and stops at different locations on the screen. This enters the new calibration settings. DRAFT 2 - 16 WT41N0 User Guide Calibration Screen Figure 2-12 Calibration Screen Confirm Calibration Screen 3. Once all of the new calibration settings are input, tap the screen or press the ENTER button to save the new calibration settings. Press ESC to discard the new calibration settings. Special Character Keypad NOTE The Special Character Keypad is only available on non-touch screen configurations with a display. The wearable terminal contains an on-screen Special Character keypad that allows users to enter alphanumeric and special characters. The keypad looks and functions like a standard keyboard. To display the Special Character keypad, press the key on the keyboard. Figure 2-13 Special Character Keypad - Alphanumeric Layer Use the arrow keys on the keyboard to move the yellow box to highlight a key on the Special Character keypad. The arrow keys wrap to the next row or column as you navigate with the keys. To select a character, press the Enter key on the wearable terminal. If the Enter or arrow keys need to be used by the application instead of the Special Character keypad, press Esc followed by the arrow or Enter key. This sends the key to the application instead of the Special Character keypad. Press the ABC key on the Special Character keypad to switch between the alphanumeric layer and the character layer. DRAFT Using the Wearable Terminal 2 - 17 Figure 2-14 Special Character Keyboard - Character Layer Navigate the keypad in the same manner as described above. To return to the alphanumeric layer, press the CH key on the keypad. Pressing CAP or SH switches the keypad to the upper case alphanumeric keypad. Figure 2-15 Special Character Keyboard in upper case Alphanumeric Mode Press the key to close the Special Character keypad. Resetting the Wearable Terminal There are two types of resets, warm boot and cold boot. A warm boot restarts the wearable terminal by closing all running programs. A cold boot also restarts the wearable terminal, but erases all stored records and entries in RAM. Data saved in flash memory or a memory card is not lost. In addition it returns formats, preferences and other settings to the factory default settings. Perform a warm boot first. This restarts the wearable terminal and saves all stored records and entries. If the wearable terminal still does not respond, perform a cold boot. Performing a Warm Boot Hold down the Power button for approximately five seconds. As soon as the wearable terminal starts to perform a warm boot release the Power button. DRAFT 2 - 18 WT41N0 User Guide Performing a Cold Boot A cold boot restarts the wearable terminal and erases all user stored records and entries that are not saved in flash memory (Application and Platform folders). Never perform a cold boot unless a warm boot does not solve the problem. NOTE Any data previously synchronized with a computer can be restored during the next ActiveSync operation. To perform a cold boot on a WT41N0 press and simultaneously hold the 1, 9 and Power button. Do not hold down any other keys or buttons. The wearable terminal initializes. To perform a cold boot on a Voice Only WT41N0 press and simultaneously hold the P1 and P2 keys and the Power button. The wearable terminal initializes. DRAFT Using the Wearable Terminal 2 - 19 Waking the Wearable Terminal The wake up conditions define what actions wake up the wearable terminal after it has gone into suspend mode. The wearable terminal can go into suspend mode by either pressing the Power button or automatically by control panel time-out settings. These settings are configurable and the factory default settings are shown in Table 2-10. Table 2-10 Wakeup Default Settings Condition for Wakeup Power Button Automatic Time-out AC power is applied. Wearable terminal is inserted into a cradle. Wearable terminal is removed from a cradle. Wearable terminal is connected to a USB device. Wearable terminal is disconnected from a USB device. A key is pressed. An attached scanner is triggered. Wireless LAN activity is detected. A headset is connected to the wearable terminal. Screen Touch (only on touch screen configurations) No No No No No No No No No No Yes Yes Yes Yes Yes Yes Yes No Yes No NOTE If the battery is removed and replaced, the only way to wake up the terminal is by pressing the Power button. Battery Health The health of the battery can be viewed on the wearable terminal Power applet. Select Start > Settings >
Control Panel > Power icon > BatteryMgmt tab. Table 2-11 BatteryMgmt Window Item State of Health Indicates the current state of the battery (Healthy or Unhealthy). Description Battery Usage Indicator Indicates the usage of the battery. Battery Usage Threshold Indicates the usage indicator threshold. Battery Serial #
Displays the serial number of the battery. For information on changing the Battery Usage Threshold, refer to the WT41N0 Integrator Guide. DRAFT 2 - 20 WT41N0 User Guide DRAFT CHAPTER 3 DATA CAPTURE Introduction The wearable terminal can be used with the following optional data capture accessories:
RS309 laser scanner RS409 laser scanner RS419 laser scanner RS507 Hands-free imager. Laser Scanning Wearable terminals with an optional RS309, RS409 or RS419 laser scanner have the following features:
Reading of a variety of bar code symbologies, including the most popular linear, postal, and 1D code types. Advanced intuitive laser aiming for easy point-and-shoot operation. Scanning Considerations Typically, scanning is a simple matter of aim, scan/decode and a few quick trial efforts master it. However, two important considerations can be used to optimize any scanning performance:
Range Any scanning device decodes well over a particular working range minimum and maximum distances from the bar code. This range varies according to bar code density and scanning device optics. Scanning within range brings quick and constant decodes; scanning too close or too far away prevents decodes. Move the scanner closer and further away to find the right working range for the bar codes being scanned. However, the situation is complicated by the availability of various integrated scanning modules. The best way to specify the appropriate working range per bar code density is through a chart called a decode zone for each scan module. A decode zone simply plots working range as a function of minimum element widths of bar code symbols. Angle DRAFT 3 - 2 WT41N0 User Guide Scanning angle is important for promoting quick decodes. When laser beams reflect directly back into the scanner from the bar code, this specular reflection can blind the scanner. To avoid this, scan the bar code so that the beam does not bounce directly back. But dont scan at too sharp an angle; the scanner needs to collect scattered reflections from the scan to make a successful decode. Practice quickly shows what tolerances to work within. NOTE Contact the Symbol Support Center if chronic scanning difficulties develop. Decoding of properly printed bar codes should be quick and effortless. Scanning Bar Codes 1. Ensure that a scan enabled application is loaded on the wearable terminal. 2. Aim the scan exit window at the bar code. 3. Press the trigger. Ensure the red scan beam covers the entire bar code. The red scan LED lights to indicate that the laser is on. The green scan LED lights. An audible beep might sound, if the application determines, to indicate the bar code was decoded successfully. Figure 3-1 Laser Scanner Aiming Pattern 4. Release the trigger. NOTE Imager decoding usually occurs instantaneously. The wearable terminal repeats the steps required to take a digital picture (image) of a poor or difficult bar code, as long as the trigger remains pulled. Scanning Tips Optimal scanning distance varies with bar code density and scanner optics. Hold the scanner farther away for larger symbols. Move the scanner closer for symbols with bars that are close together. NOTE Scanning procedures depend on the application and wearable terminal configuration. An application may use different scanning procedures from the one listed above. Scan LED Indicator The LED on the scanner provides a visual indication of the scan status. Table 3-1 Scan LED Indicators LED Status Off Solid Red Solid Green Indication Not scanning. Laser enabled, scanning in process. Successful decode. DRAFT Data Capture 3 - 3 Imaging The wearable terminal with an optional RS507 imager has the following features:
Omnidirectional (360) reading of a variety of bar code symbologies, including the most popular linear, postal, PDF417, and 2D matrix code types. The ability to capture and download images to a host for a variety of imaging applications. Advanced intuitive laser aiming for easy point-and-shoot operation. The imager uses digital camera technology to take a digital picture of a bar code, stores the resulting image in its memory, and executes state-of-the-art software decoding algorithms to extract the data from the image. Operational Modes The wearable terminal with optional RS507 imager supports three modes of operation, listed below. Activate each mode pressing the Scan button. Decode Mode: In this mode, the RS507 attempts to locate and decode enabled bar codes within its field of view. The imager remains in this mode as long as you hold the scan button, or until it decodes a bar code. NOTE To enable Pick List Mode, download the Control Panel applet from the Support Central web site at http://www.motorola.com/enterprisemobility/support. Pick List can also be set in an application using a API command. Pick List Mode: This mode allows you to selectively decode a bar code when more than one bar code is in the RS507s field of view. To accomplish this, move the aiming crosshair center dot over the required bar code to decode only that bar code. This feature is ideal for pick lists containing multiple bar codes and manufacturing or transport labels containing more than one bar code type (either 1D or 2D). Image Capture Mode: Use this mode to capture an image within the RS507s field of view. This is useful for capturing signatures or images of items like damaged boxes. Imager Scanning 1. Ensure that a scan-enabled application is loaded on the wearable terminal. 2. Press and hold the scan button. The red laser aiming pattern turns on to assist in aiming. Ensure the cross-hair is on top of the bar code. The Decode LED lights red to indicate that scanning is in process, then lights green and a beep sounds, by default, to indicate the bar code was decoded successfully. Note that when the RS507 is in Pick List Mode, the imager does not decode the bar code until the crosshair center dot touches the bar code. DRAFT 3 - 4 WT41N0 User Guide Figure 3-2 Imager Aiming Pattern Figure 3-3 Pick List Mode with Multiple Bar Codes 3. Release the scan button. NOTE Imager decoding usually occurs instantaneously. The RS507 repeats the steps required to take a digital picture (image) of a poor or difficult bar code as long as the scan button remains pressed. DRAFT CHAPTER 4 WIRELESS APPLICATIONS Introduction Wireless Local Area Networks (LANs) allow mobile computers to communicate wirelessly and send captured data to a host device in real time. Before using the wearable terminal on a WLAN, the facility must be set up with the required hardware to run the wireless LAN and the wearable terminal must be configured. Refer to the documentation provided with the access points (APs) for instructions on setting up the hardware. NOTE 802.11d is enabled by default. When enabled, the AP must be configured the same in order to connect. To configure the wearable terminal, a set of wireless applications provide the tools to configure and test the wireless radio in the wearable terminal. Refer to the Wireless Fusion Enterprise Mobility Suite User Guide for Version X1.01 for information on configuring wireless profiles. Go to http://supportcentral.motorola.com for the latest version of this guide. See Software Versions on page x to determine the Fusion version on the wearable terminal. Tap the Signal Strength icon to display the Wireless Launcher menu. Signal Strength Icon Figure 4-1 Wireless Launcher Menu DRAFT 4 - 2 WT41N0 User Guide Many of the items in the menu invoke one of the Fusion applications. These menu items and their corresponding applications are summarized in Table 4-1. Table 4-1 Supported Applications Application Find WLANs Manage Profiles Manage Certs Manage PACs Options Wireless Status Wireless Diagnostics Log On/Off Description Invokes the Find WLANs application which displays a list of the WLANs available in your area. Invokes the Manage Profiles application (which includes the Profile Editor Wizard) to manage and edit your list of WLAN profiles. Invokes the Certificate Manager application which allows you to manage certificates used for authentication. Invokes the PAC Manager application which helps you manage the list of Protected Access Credentials used with EAP-FAST authentication. Invokes the Options application which allows you to configure the Fusion option settings. Invokes the Wireless Status application which allows you to view the status of the current wireless connection. Invokes the Wireless Diagnostics application which provides tools with which to diagnose problems with the wireless connection. Invokes the Network Login dialog which allows you to log on to a particular profile or to log off from the currently active profile. Fusion Help Invokes Fusion Help application which provides on-device Fusion Help Additional Wireless Launcher menu entries include:
Enable/Disable Radio Hide Menu Exit. Signal Strength Icon The Signal Strength icon in the task tray indicates the mobile computers wireless signal strength as follows:
Table 4-2 Signal Strength Icons Descriptions Icon Status Action Excellent signal strength WLAN network is ready to use. Very good signal strength WLAN network is ready to use. Good signal strength WLAN network is ready to use. DRAFT Wireless Applications 4 - 3 Table 4-2 Signal Strength Icons Descriptions (Continued) Icon Status Fair signal strength Poor signal strength Out-of-network range (not associated) The WLAN radio is disabled. None The Wireless Launcher application was exited. Action WLAN network is ready to use. Notify the network administrator that the signal strength is only Fair. WLAN network is ready to use. Performance may not be optimum. Notify the network administrator that the signal strength is Poor. No WLAN network connection. Notify the network administrator. The WLAN radio is disabled. To enable, choose Enable Radio from the Wireless Applications menu. The Wireless Launcher application has been closed. See the Fusion Functions paragraphs below for how to restart the Wireless Launcher. Turning Off the Radio To turn off the WLAN radio tap the Signal Strength icon on the task tray and select Disable Radio. appears indicating that the radio is disabled (off). Signal Strength Icon Figure 4-2 Signal Strength Icon To turn the radio back on, tap the Signal Strength icon on the task tray and select Enable Radio. Minimum Setup Below is a list of the minimum effort to achieve a wireless connection. Note that there are many discrete nuances that may affect the performance of your wireless connection that might be missed if you do not consider them carefully. You will need to create a profile. It is recommended that you read the profile editor chapter. 1. Find out from your IT administrator what the connection settings should be (Extended Service Set Identifier
(ESSID), Enterprise or Personal, authentication type, tunnel type, certificate requirements, Protected Access Credentials (PAC) requirements). Note that not all of the items listed may be relevant. 2. Create the profile using the information provided by the IT administrator. 3. Enter the Manage Profile screen, select the profile (press and hold), and select the Connect option in the context menu that appears. DRAFT 4 - 4 WT41N0 User Guide DRAFT
1 2 3 4 5 6 7 | User Manual Part 2 | Users Manual | 4.93 MiB | December 11 2012 |
CHAPTER 5 ACCESSORIES Introduction The wearable terminal accessories provide a variety of product support capabilities. Accessories include cradles, cables and scanners. Table 5-1 lists the major accessories available for the wearable terminal:
Table 5-1 Wearable Terminal Accessories Accessory Single Slot USB Cradle Description Charges the wearable terminal main battery and a spare battery. It also synchronizes the wearable terminal with a host computer through a USB connection. Four Slot Ethernet Cradle Charges up to four wearable terminals (with main battery installed) and provides communication through an Ethernet connection. Four Slot Spare Battery Charger Charges up to four spare batteries. RS409 Scanner RS419 Scanner RS309 Scanner RS507 Scanner Wrist Mount Hip Mount Headset Provides 1D scanning capability. Provides 1D scanning capability. Provides 1D scanning capability. Provides wired or wireless imaging capability. Provides a means for wearing the wearable terminal on the arm for hands-free applications. Provides a means for wearing the wearable terminal on a belt for hands-free applications. For audio playback/recording during voice-enabled applications. Headset Adapters Connect an optional headset to the wearable terminal. Replacement Batteries Standard Capacity Battery: 2330 mAh (minimum) Extended Capacity Battery: 4600 mAh (minimum) DRAFT 5 - 2 WT41N0 User Guide Table 5-1 Wearable Terminal Accessories (Continued) Accessory Description Standard Capacity Battery Freezer Pouch Allows the user to use the wearable terminal with standard capacity battery in a freezer environment on the hip or wrist for use in voice picking applications. Extended Capacity Battery Freezer Pouch Allows the user to use the wearable terminal with extended capacity battery in a freezer environment on the hip or wrist for use in voice picking applications. USB Adapter Connector Shroud Screen Protectors Arm Sleeve Connects the Single-slot cradle to USB hubs, mice, keyboards and memory. The adapter has a USB mini-A connector on the cradle side and a USB A Female connector on the other side. Protects the connector of an accessory that connects to the wearable computer. Package of 3 screen protectors. Extra layer sleeve to wear under wrist mount for extra comfort and hygiene. RCH50 Rugged Cabled Headset Enables hands-free voice-directed mobility communication. An audible mono headset with noise cancelling boom microphone helps survive harsh environments. Software Enterprise Mobility Developer Kits available at:
http://www.motorola.com/enterprisemobility/support. Device Configuration Package (DCPforWT41x0c50) and Platform SDK
(PSDK41x0c50) for WT41x0, available at:
http://www.motorola.com/enterprisemobility/support. DRAFT Getting Started 5 - 3 Single Slot USB Cradle CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 6-3. This section describes how to use a Single Slot USB cradle (Figure 5-1) with the wearable terminal. For USB communication setup procedures refer to the WT41N0 Integrator Guide. Scanner Placed in Well Spare Battery 2 1 Spare Battery Charging LED Figure 5-1 Single Slot USB Cradle The Single Slot USB Cradle:
Provides 5.4 VDC power for operating the wearable terminal. Provides USB port for data communication between the wearable terminal and a host computer or other serial devices (e.g., a printer). NOTE The normal function of the product may be disturbed by Strong Electro Magnetic Interference (for example, static electricity). If so, simply remove and re-insert the terminal to resume normal operation. In case the function does not resume, please use the product in another location. Synchronizes information between the wearable terminal and a host computer. (With customized or third party software, it can also be used to synchronize the wearable terminal with corporate databases.) Charges the wearable terminals battery and a spare battery. Provides a location for storing a scanner when a wearable terminal is docked in the cradle. DRAFT 5 - 4 WT41N0 User Guide Battery Charging Indicators The Single Slot USB cradle can charge the wearable terminals main battery and a spare battery simultaneously. The wearable terminals amber Charge Status LED indicates the status of the battery charging in the wearable terminal. See Table 1-2 on page 1-7 for charging status indications. The amber Spare Battery Charging LED on the cradle (see Figure 5-1 on page 5-3) indicates the status of the spare battery charging in the cradle. See Table 5-2 for charging status indications. The standard capacity battery fully charges in less than four hours and the extended capacity battery fully charges in less than eight hours. Table 5-2 Spare Battery LED Charging Indicators Spare Battery LED
(on cradle) Indication Off No spare battery in well; spare battery not placed correctly; cradle is not powered. Fast Blinking Amber Charging error:
Temperature is too low or too high. Charging has gone on too long without completing (typically eight hours). Slow Blinking Amber Spare battery is charging. Solid Amber Charging complete. DRAFT Getting Started 5 - 5 Four Slot Ethernet Cradle CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 6-3. This section describes how to use a Four Slot Ethernet cradle (Figure 5-2) with the wearable terminal. For Ethernet communication setup procedures refer to the WT41N0 Integrator Guide. Scanner Well Figure 5-2 Four Slot Ethernet Cradle The Four Slot Ethernet cradle:
Connects up to four wearable terminals to an Ethernet network. Provide 5.4 VDC power for operating the wearable terminal and charging the battery. Simultaneously charges up to four wearable terminals (with batteries installed). You cannot ActiveSync using the Four Slot Ethernet cradle. To ActiveSync with a host computer use the Single Slot USB cradle. Battery Charging The four slot Ethernet cradle can charge up to four wearable terminals simultaneously. To charge the wearable terminal:
DRAFT 5 - 6 WT41N0 User Guide 1. Slide the wearable terminal into the wearable terminal slot. 2. The wearable terminal amber Charge Status LED indicates the wearable terminal battery charging status. The standard capacity battery usually charges in less than four hours and the extended capacity battery fully charges in less than eight hours. See Table 5-2 for charging status indications. 3. When charging is complete, remove the wearable terminal from the cradle. LED Charge Indications The Four Slot Ethernet cradle uses the wearable terminal amber Power LED to indicate the battery charging status. See Table 5-2 on page 5-4 for charging status indications. Speed LED The green Speed LED lights to indicate that the transfer rate is 100 Mbps. When it is not lit it indicates that the transfer rate is 10 Mbps. Link LED The yellow Link LED blinks to indicate activity, or stays lit to indicate that a link is established. When it is not lit, it indicates that there is no link. Battery Charging Indicators The wearable terminals amber charge LED indicates the status of the battery charging in the wearable terminal. See Table 1-2 on page 1-7 for charging status indications. The standard capacity battery fully charges in less than four hours and the extended capacity battery fully charges in less than eight hours. DRAFT Getting Started 5 - 7 Four Slot Spare Battery Charger CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 6-3. This section describes how to use the Four Slot Spare Battery Charger to charge up to four wearable terminal spare batteries. Spare Battery Charging Well (4) Spare Battery Spare Battery Charging LEDs (4) Figure 5-3 Four Slot Spare Battery Charger Spare Battery Charging with the Four Slot Spare Battery Charger Insert the battery into a spare battery charging slot and gently press down on the battery to ensure proper contact. Battery Charging Indicators An amber LED is provided on each battery charging well. See Table 5-3 for charging status indications.The standard capacity battery usually charges in less than four hours and the extended capacity battery fully charges in less than eight hours. Table 5-3 Spare Battery LED Charging Indicators LED Indication Off No spare battery in slot; spare battery not placed correctly; cradle is not powered. Fast Blinking Amber Charging error:
Temperature is too low or too high. Charging has gone on too long without completing (typically eight hours). Slow Blinking Amber Spare battery is charging. Solid Amber Charging complete. DRAFT 5 - 8 WT41N0 User Guide RS409/RS419 Scanner To connect the RS409 or RS419 scanner to the wearable terminal:
NOTE There are two scanner configurations available. The short cable configuration connects the scanner to the wearable terminal mounted on the arm. The extended cable configuration connects the scanner to the WT41N0 mounted on the hip. 1. Remove the rubber plug from the wearable terminal interface connector. 2. Connect the scanner interface cable to the wearable terminal interface connector. If the wearable terminal is mounted on the arm, connect the cable to the interface connector closest to the wrist. Scanner Cable Connector Interface Connector Figure 5-4 Connecting Scanner to Wearable Terminal 3. If using the extended cable configuration, route the scanner cable up to the shoulder and down to the hand that the scanner mounts on. Attach two cable clips to clothing and secure cable to cable clip. Figure 5-5 Cable Clip Installation 4. Rotate the trigger assembly to the correct position for the hand that the scanner mounts to. DRAFT 5. Slide the scanner onto the index finger with the scan trigger next to the thumb. Getting Started 5 - 9 Figure 5-6 Place the Scanner on Index Finger 6. Tighten the finger strap. Figure 5-7 Tightening Straps 7. If required, cut excess finger strap material. After connecting the scanner, warm boot the wearable terminal. See Resetting the Wearable Terminal on page 2-17 for information on performing a warm boot. DRAFT 5 - 10 WT41N0 User Guide RS309 Scanner The RS309 connects to the wearable terminal and mounts on the back of either hand using the RS309 glove. 1. Remove the rubber plug from the wearable terminal interface connector. 2. Connect the RS309 trigger cable to the back of the RS309. Figure 5-8 Connecting Trigger Cable to RS309 Trigger Connector 3. Connect the end of the RS309 interface cable to the wearable terminal interface connector. If the wearable terminal is mounted on the arm, connect the cable to the interface connector closest to the wrist. 4. If the wearable terminal is mounted on the hip, route the interface cable up to the shoulder and down to the hand that the scanner mounts on. Attach two cable clips to clothing and secure cable to cable clip. Figure 5-9 Cable Clip Installation DRAFT Getting Started 5 - 11 5. Mount the RS309 on the RS309 glove. Refer to the RS309 Glove Installation Guide for information on mounting the RS309. 6. Route the trigger cable around the side of the RS309, next to the index finger. 7. Slide the trigger mount on the index finger, with the button positioned next to the thumb, and adjust the velcro strap. Figure 5-10 RS309 on Back of Hand After connecting the scanner, warm boot the wearable terminal. See Resetting the Wearable Terminal on page 2-17 for information on performing a warm boot. DRAFT 5 - 12 WT41N0 User Guide RS507 Imager Refer to the RS507 Hands-free Imager Quick Reference Guide, p/n 72-115987-xx and the RS507 Hands-free Imager Product Reference Guide, p/n 72E-120802-xx for detailed information. Freezer Pouch NOTE Wearable computers with standard capacity batteries must use the Standard Capacity Battery Freezer Pouch while wearable computers with extended capacity batteries must use the Extended Capacity Battery Freezer Pouch. See Table 5-1 on page 5-1 for more information. CAUTION Do not use the wearable terminal with touch screen in the freezer pouch or in environments that are below -20C (-4F). The freezer pouch allows the user to use the wearable terminal in a freezer environment on the hip or wrist for use in voice picking applications. An RS309, RS409 or RS419 scanner with an extended cable is required when mounting the freezer pouch on the hip mount, if scanning is also part of the application. In order to keep the wearable terminal at a safe operating temperature in a meat or ice cream freezer, the freezer pouch insulates the wearable terminal to keep the heat generated by the wearable terminal within the pouch. The pouch is not heated. There are no batteries to worry about or electronics within the pouch. The freezer pouch can be either hip-mounted or wrist-mounted. For hip-mounting, there is a belt loop on its back for attached a belt (sold separately). For wrist-mounting, customers can buy either a set of standard-length or longer-length wrist straps and use them with the pouch. The longer-length wrist straps are recommended for wrist-mounting over coats. The freezer pouch has openings on each side for wearable scanners and headset adapters. While the freezer pouch is designed to allow workers to use the wearable terminal in meat and ice cream freezers, there are some very important limitations to follow:
Do not use in environments that are below -30C (-22F). Do not allow the wearable terminal (with or without the freezer pouch) to remain in the suspend mode in environments below -20C (-4F) for more than 10 minutes. This prevents the wearable terminal from cooling down to the ambient freezer temperature. The pouch maintains the wearable terminal at a sufficient temperature while it is in use, but lengthy periods of inactivity bring the wearable terminal below its operating temperature. Do not store wearable terminals in the meat or ice cream freezer. As explained above, this would allow the wearable terminals to chill to the ambient freezer temperature, which is below their operating temperature. Furthermore, if batteries were left in wearable terminals stored in the freezer, the batteries themselves could freeze, which could damage them. At the least, they would not function while frozen. Batteries cannot be charged below 0C (32F). Motorola cradles and battery chargers have an automatic shut-off to insure this. If using wearable scanners with the wearable terminal in the meat or ice cream freezer for a shift, remember that the RS309 freezer configuration is the correct scanner to choose, due to its lower operating temperature range and its desiccant pack to remove condensation. Slide the wearable terminal into the freezer pouch. DRAFT Getting Started 5 - 13 Figure 5-11 Insert Wearable Terminal into Freezer Pouch Close the front flap followed by the back flap. Figure 5-12 Close Freezer Pouch Flaps Slide a belt through the belt loop on the back of the freezer pouch. The wearable terminal can be mounted right-side up or up-side down depending upon user preference or application. DRAFT 5 - 14 WT41N0 User Guide Wired Headset You can use a mono headset with a microphone for audio communication with an audio enabled application. The Headset Cable Adapter is required to connect a headset with the wearable terminal. Headset Cable Adapter Figure 5-13 Typical Headset Connected to Headset Adapter DRAFT Getting Started 5 - 15 The headset cable adapter connects the headset to the wearable terminal. Connect the headset connect end of the adapter to the headset connector. Plug the other end of the adapter to the wearable terminal interface connector. NOTE Not all headset plugs are compatible with the headset cable adapter. CAUTION When disconnecting the headset from the headset adapter, pull the two connectors away from each. Do not bend connectors to disconnect. Figure 5-14 Disconnecting Headset from Headset Adapter Figure 5-15 Headset Connected to wearable Terminal on Hip DRAFT 5 - 16 WT41N0 User Guide Connector Shroud Assembly 1. Remove cable from wearable terminal, if required. 2. Align the cable connector with the connector shroud bottom housing. Ensure that the disconnect button on the connector faces up. Disconnect Button Bottom Housing Figure 5-16 Installing Bottom Housing 3. Place the cable connector into the shroud bottom housing as shown. Figure 5-17 Installing Top Housing 4. Press the top housing into the bottom housing. The housings will snap together. 5. Plug the cable connector into the wearable terminal connector. Disconnecting the Cable from the Wearable Terminal NOTE Follow the instructions below when disconnecting the cable connector and shroud from the wearable terminal. Once the shroud is installed on the connector, do not disassemble the shroud by prying it apart. 1. Turn the wearable terminal over to expose the top housing of the shroud. 2. Push the tip of a ball-point pen through the hole in the connector shroud top housing. The connector disengages from the wearable terminal. DRAFT Getting Started 5 - 17 Connector Eject Hole Figure 5-18 Disconnecting Connector with Shroud DRAFT 5 - 18 WT41N0 User Guide DRAFT CHAPTER 6 MAINTENANCE &
TROUBLESHOOTING Introduction This chapter includes instructions on cleaning and storing the wearable terminal, and provides troubleshooting solutions for potential problems during wearable terminal operation. Maintaining the Wearable Terminal For trouble-free service, observe the following tips when using the wearable terminal:
Do not scratch the touch screen of the wearable computer. When activating with the wearable computer touch screen, use finger tips. Never use a pen or pencil or other sharp object on the surface of the screen. Motorola requires using a screen protector, p/n KT-114032-01R or KT-114032-02R. A screen protector is applied to the wearable computer touch screen. Motorola requires using this to minimize wear and tear. Screen protectors enhance the usability and durability of touch screen displays. Benefits include:
Protection from scratches and gouges Durable touch surface with tactile feel Abrasion and chemical resistance Keeping the devices screen looking new Quick and easy installation. Protect the wearable terminal with a touch screen from temperature extremes. Do not store or use the wearable terminal with a touch screen in any location that is extremely dusty, damp, or wet. Use a soft lens cloth to clean the wearable terminal display/touch panel. Periodically replace the rechargeable Li-ion battery to ensure maximum battery life and product performance. Battery life depends on individual usage patterns. The screen of the wearable terminal contains glass. Take care not to drop the wearable terminal or subject it to strong impact. DRAFT 6 - 2 WT41N0 User Guide Regularly replace all Velcro straps on the wrist mount and wearable scanners, to ensure adequate adhesion of the Velcro. Wrist Mount Cleaning Instructions It may be necessary to wash the wrist mount straps and replaceable pad when they become soiled. Remove the straps and pad from the wrist mount. Hand wash in cold water with a mild detergent (such as Woolite). Do not use bleach. Air dry. Do not use a dryer. Replaceable Pad Strap Figure 6-1 Wrist Mount Soft Goods Arm Sleeve Cleaning Instructions It may be necessary to wash the arm sleeve when it become soiled. Hand wash in cold water with a mild detergent (such as Woolite). Do not use bleach. Air dry. Do not use a dryer. Removing the Screen Protector NOTE Not using a screen protector on a wearable terminal with a touch screen can affect warranty coverage. To purchase replacement protectors, contact your local account manager or Motorola, Inc. These include screen protector installation instructions. Part number: KT-114032-01Ror KT-114032-02R Screen Protector 3/pk. A screen protector is applied to the wearable terminal with touch screen. Motorola recommends using this to minimize wear and tear. Screen protectors enhance the usability and durability of touch screen displays. To remove the screen protector, lift the corner using a thin plastic card, such as a credit card, then carefully lift it off the display. DRAFT Getting Started 6 - 3 Lift Screen Protector Corner Figure 6-2 Removing the Screen Protector CAUTION Do not use a sharp object to remove the protector. Doing so can damage the touch screen. Battery Safety Guidelines The area in which the units are charged should be clear of debris and combustible materials or chemicals. Particular care should be taken where the device is charged in a non commercial environment. Improper battery use may result in a fire, explosion, or other hazard. To charge the mobile device battery, the battery and charger temperatures must be between 0 C and
+40 C (+32 F and +104 F). Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present a risk of fire, explosion, leakage, or other hazard. If you have any questions about the compatibility of a battery or a charger, contact Motorola Enterprise Mobility support. Do not disassemble or open, crush, bend or deform, puncture, or shred. Severe impact from dropping any battery-operated device on a hard surface could cause the battery to overheat. Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals. Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, or expose to fire, explosion, or other hazard. Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle or near a radiator or other heat source. Do not place battery into a microwave oven or dryer. Battery usage by children should be supervised. Please follow local regulations to promptly dispose of used re-chargeable batteries. Do not dispose of batteries in fire. DRAFT 6 - 4 WT41N0 User Guide Seek medical advice immediately if a battery has been swallowed. In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with large amounts of water and seek medical advice. If you suspect damage to your equipment or battery, contact Motorola Enterprise Mobility support to arrange for inspection. Cleaning WARNING! Avoid exposing this product to contact with hot oil or other flammable liquids. If such exposure occurs, unplug the device and clean the product immediately in accordance with these guidelines. CAUTION Always wear eye protection. Read warning label on compressed air and alcohol product before using. If you have to use any other solution for medical reasons please contact Motorola for more information. Materials Required Alcohol wipes Soft lens cloth Cotton tipped applicators Can of compressed air with a tube. Isopropyl alcohol Cleaning the Wearable Terminal Housing Using the alcohol wipes, wipe the housing including keys and in-between keys. Display The display can be wiped down with the alcohol wipes, but care should be taken not to allow any pooling of liquid around the edges of the display. Immediately dried the display with a soft, non-abrasive cloth to prevent streaking. For WT41N0 with touch panel, only use a soft lens cloth to clean the touch panel overlay surface. Connectors Clean all three connectors, two interface connectors on the sides of the wearable terminal and the cradle connector on the back. 1. Remove the main battery from mobile computer. See Installing and Removing the Main Battery on page 1-6. 2. Remove connector rubber plugs, if required. DRAFT Getting Started 6 - 5 3. Dip the cotton portion of the cotton tipped applicator in isopropyl alcohol. 4. Rub the cotton portion of the cotton tipped applicator back-and-forth across each connector. Do not leave any cotton residue on the connector. 5. Repeat at least three times. 6. Use the cotton tipped applicator dipped in alcohol to remove any grease and dirt near the connector area. 7. Use a dry cotton tipped applicator and repeat steps 4 through 7. 8. Spray compressed air on the connector areas by pointing the tube/nozzle about inch away from the surface. CAUTION Do not point nozzle at yourself and others, ensure the nozzle or tube is away from your face. 9. Inspect the area for any grease or dirt, repeat if required. 10. Replace connector rubber plugs, if required. Cleaning the RS309, RS409, RS419 and RS507 Housing Using the alcohol wipes, wipe the housing including keys and in-between keys. Scanner Exit Window Wipe the scanner exit window periodically with a lens cloth or other material suitable for cleaning optical material such as eyeglasses. Connectors 1. Disconnect the scanner from mobile computer. 2. Dip the cotton portion of the cotton tipped applicator in isopropyl alcohol. 3. Rub the cotton portion of the cotton tipped applicator back-and-forth across the connector pins. Do not leave any cotton residue on the connector. 4. Repeat at least three times. 5. Use the cotton tipped applicator dipped in alcohol to remove any grease and dirt near the connector area. 6. Use a dry cotton tipped applicator and repeat steps 3 through 5. 7. Spray compressed air on the connector area by pointing the tube/nozzle about inch away from the surface. CAUTION Do not point nozzle at yourself and others, ensure the nozzle or tube is away from your face. 8. Inspect the area for any grease or dirt, repeat if required. DRAFT 6 - 6 WT41N0 User Guide Cleaning Cradle Connectors To clean the connectors on a cradle:
1. Remove the DC power cable from the cradle. 2. Dip the cotton portion of the cotton tipped applicator in isopropyl alcohol. 3. Rub the cotton portion of the cotton tipped applicator along the pins of the connector. Slowly move the applicator back-and-forth from one side of the connector to the other. Do not let any cotton residue on the connector. 4. All sides of the connector should also be rubbed with the cotton tipped applicator. CAUTION Do not point nozzle at yourself and others, ensure the nozzle or tube is away from your face. 5. Spray compressed air in the connector area by pointing the tube/nozzle about inch away from the surface. 6. Ensure that there is no lint left by the cotton tipped applicator, remove lint if found. 7. If grease and other dirt can be found on other areas of the cradle, use lint free cloth and alcohol to remove. CAUTION Allow at least 10 to 30 minutes (depending on ambient temperature and humidity) for the alcohol to air dry before applying power to cradle. If the temperature is low and humidity is high, longer drying time is required. Warm temperature and dry humidity requires less drying time. Cleaning Frequency The cleaning frequency is up to the customers discretion due to the varied environments in which the mobile devices are used. They may be cleaned as frequently as required. However when used in dirty environments it may be advisable to periodically clean the ring scanners exit windows to ensure optimum scanning performance. DRAFT Getting Started 6 - 7 Troubleshooting Wearable Terminal Table 6-1 Troubleshooting the Wearable Terminal Problem Cause Solution Wearable terminal does not turn on. Lithium-ion battery not charged. Charge or replace the lithium-ion battery in the wearable terminal. Lithium-ion battery not installed properly. System crash. Ensure battery is installed properly. See Installing and Removing the Main Battery on page 1-6. Perform a warm boot. If the wearable terminal still does not turn on, perform a cold boot. See Resetting the Wearable Terminal on page 2-17. Rechargeable lithium-ion battery did not charge. Battery failed. Replace battery. If the wearable terminal still does not operate, try a warm boot, then a cold boot. See Resetting the Wearable Terminal on page 2-17. Wearable terminal removed from cradle while battery was charging. Insert wearable terminal in cradle and begin charging. The standard capacity battery fully charges in less than four hours and the extended capacity battery fully charges in less than eight hours. Ambient temperature of the cradle is too warm or too cold. Wearable terminal not powered on. Screen protective is scratched or hazy. Screen protective is scratched or hazy. Cannot see characters on display.(not applicable to voice only configuration) Display is hard to read. (not applicable to voice only configuration) Move the cradle to an area where the ambient temperature is between 0 C and 40 C (32 F and 104 F). Press the Power button. Replace screen protector. Replace screen protector. DRAFT 6 - 8 WT41N0 User Guide Table 6-1 Troubleshooting the Wearable Terminal (Continued) Problem Cause Solution During data communication, no data was transmitted, or transmitted data was incomplete. Wearable terminal removed from cradle or unplugged from host computer during communication. Incorrect cable configuration. Communication software was incorrectly installed or configured. No sound is audible. Volume setting is low or turned off. Wearable terminal turns itself off. Wearable terminal is inactive. Voice Only WT41N0 was set to suspend. Replace the wearable terminal in the cradle, or reattach the Synchronization cable and re-transmit. See the System Administrator. Perform setup. Refer to the WT41N0 Integrator Guide for details. Ensure that Microsoft ActiveSync 4.5 or greater is installed on the host computer. Adjust volume. Change volume settings by selecting Start >
Settings > Control Panel > Volume & Sounds icon > Volume tab. Move the slider to change the volume level or use volume control on voice application. The wearable terminal turns off after a period of inactivity. If the wearable terminal is running on battery power, this period can be set to 30 sec., 1, 2, 3, 4, 5 or 6 minutes. If the wearable terminal is running on external power, this period can be set to 1, 2, 3, 5, 10, 15 and 30 minutes. Check the power settings by selecting Start > Settings > Control Panel > Power icon > Power Off tab. Change the setting if you need a longer delay before the automatic shutoff feature activates. Return Voice Only WT41N0 suspend setting to factory default
(disabled). Battery is depleted. Replace or recharge the battery. Battery is not inserted properly. Insert the battery properly (see Installing and Removing the Main Battery on page 1-6). The wearable terminals battery is low and it powers down to protect memory content. Too many files stored on the wearable terminal. Too many applications installed on the wearable terminal. A message appears stating that the wearable terminal memory is full.(not applicable to voice only configuration) Replace or recharge the battery. Delete unused memos and records. You can save these records on the host computer. If you have installed additional applications on the wearable terminal, remove them to recover memory. Select Start > Settings > Control Panel > Remove Programs icon. Select the unused program and select Remove. DRAFT Table 6-1 Troubleshooting the Wearable Terminal (Continued) Getting Started 6 - 9 Problem The wearable terminal does not accept scan input. Wearable terminal goes into IPL mode after cold boot. If all three LEDs are lit solid. WLAN connection is lost when the wearable terminal is connected to a host computer using ActiveSync. Cause Scanning application is not loaded. Unreadable bar code. Distance between exit window and bar code is incorrect. Wearable terminal is not programmed for the bar code. Solution Verify that the unit is loaded with a scanning application. See the System Administrator. Ensure the symbol is not defaced. Ensure wearable terminal is within proper scanning range. Ensure the wearable terminal is programmed to accept the type of bar code being scanned. Wearable terminal is not programmed to generate a beep. If a beep on a good decode is expected and a beep is not heard, check that the application is set to generate a beep on good decode. Battery is low. Headset adapter without a headset is connected to the wearable terminal during a cold boot. Scanner trigger is held down during a cold boot. P1 or P2 key is held down during a cold boot. Voice Only WT41N0 is in IPL mode. Microsoft security feature prevents connection to two separate networks. If the scanner stops emitting a laser beam when the trigger is pressed, check the battery level. When the battery is low, the scanner shuts off before the wearable terminal low battery condition notification. Note: If the scanner is still not reading symbols, contact the distributor or Motorola. Disconnect the headset adapter prior to performing a cold boot. Update to a newer operating system (OEM version 05.30.0000 or higher). Do not press trigger during a cold boot. Do not press the P1 or P2 key during a cold boot. Perform cold boot. See Resetting the Wearable Terminal on page 2-17. Disconnect from the WLAN network prior to connecting to a host computer using ActiveSync. DRAFT 6 - 10 WT41N0 User Guide Table 6-1 Troubleshooting the Wearable Terminal (Continued) Problem Cause Solution Wearable terminal cannot find any Bluetooth devices nearby. Too far from other Bluetooth devices. Move closer to the other Bluetooth device(s), within a range of 10 meters. The Bluetooth device(s) nearby are not turned on. The Bluetooth device(s) are not in discoverable mode. Turn on the Bluetooth device(s) you wish to find. Set the Bluetooth device(s) to discoverable mode. If needed, refer to the devices user documentation for help. DRAFT Getting Started 6 - 11 Four Slot Ethernet Cradle Table 6-2 Troubleshooting the Four Slot Ethernet Cradle Problem Cause Solution Wearable terminal amber Charge Status LED does not light when wearable terminal inserted. Wearable terminal battery is not charging. Cradle is not receiving power. Ensure the power cable is connected securely to both the cradle and to AC power. Wearable terminal is not correctly seated. Remove and re-insert the wearable terminal into the cradle, ensuring it is correctly seated. Wearable terminal was removed from cradle or cradle was unplugged from AC power too soon. Battery is faulty. Ensure cradle is receiving power. Ensure the wearable terminal is seated correctly. If the wearable terminal battery is fully depleted, it can take up to four hours to fully recharge a standard capacity battery and it can take up to eight hours to fully recharge an extended capacity battery. Verify that other batteries charge properly. If so, replace the faulty battery. The wearable terminal is not fully seated in the cradle. Remove and re-insert the wearable terminal into the cradle, ensuring it is correctly seated. Ambient temperature of the cradle is too warm or too cold. During data communication, no data was transmitted, or transmitted data was incomplete. Wearable terminal removed from cradle during communication. Incorrect cable configuration. Ethernet connection error. Link LED is not lit (see Link LED on page 5-6). Move the cradle to an area where the ambient temperature is between 0 C and 40 C (32 F and 104 F). Replace wearable terminal in cradle and retransmit. See the system administrator or refer to the WT41N0 Integrator Guide. See the system administrator. Probable Ethernet connection error. Wearable terminals main batteries not charging. Ambient temperature of the cradle is too warm or too cold. Move the cradle to an area where the ambient temperature is between 0 C and 40 C (32 F and 104 F). DRAFT 6 - 12 WT41N0 User Guide Four Slot Spare Battery Charger Table 6-3 Troubleshooting The Four Slot Spare Battery Charger Symptom Batteries not charging. Possible Cause Battery was removed from the charger or charger was unplugged from AC power too soon. Battery is faulty. Solution Re-insert the battery in the charger or re-connect the chargers power supply. Verify that other batteries charge properly. If so, replace the faulty battery. Battery contacts not connected to charger. Verify that the battery is oriented properly and firmly seated in the battery well correctly with the contacts facing down. See Figure 5-3 on page 5-7 for proper battery orientation. Ambient temperature of the charger is too warm or too cold. Move the charger to an area where the ambient temperature is between 0 C and 40 C (32 F and 104 F). DRAFT Getting Started 6 - 13 Single Slot USB Cradle Table 6-4 Troubleshooting the Single Slot USB Cradle Symptom Charge Status LEDs do not light when wearable terminal or spare battery is inserted. Wearable terminal battery is not charging. Possible Cause Solution Cradle is not receiving power. Ensure the power cable is connected securely to both the cradle and to AC power. Wearable terminal is not seated firmly in the cradle. Spare battery is not seated firmly in the cradle. Wearable terminal was removed from cradle or cradle was unplugged from AC power too soon. Remove and re-insert the wearable terminal into the cradle, ensuring it is firmly seated. Remove and re-insert the spare battery into the charging slot, ensuring it is firmly seated. Ensure cradle is receiving power. Ensure wearable terminal is seated correctly. Confirm main battery is charging. If a wearable terminal battery is fully depleted, it can take up to four hours to fully recharge a standard capacity battery and up to eight hours for an extended capacity battery (if the wearable terminal is off, and longer if the wearable terminal is operating). View battery status by selecting Start > Settings > Control Panel >
Power icon. Battery is faulty. Verify that other batteries charge properly. If so, replace the faulty battery. The wearable terminal is not fully seated in the cradle. Ambient temperature of the cradle is too warm or too cold. Remove and re-insert the wearable terminal into the cradle, ensuring it is firmly seated. Move the cradle to an area where the ambient temperature is between 0C and 40C (32F and 104F). Spare battery is not charging. Battery inserted incorrectly. Verify that the battery is oriented properly and firmly seated in the battery well correctly with the contacts facing down. See Figure 5-3 on page 5-7 for proper battery orientation. Battery is faulty. Verify that other batteries charge properly. If so, replace the faulty battery. Ambient temperature of the cradle is too warm or too cold. Move the cradle to an area where the ambient temperature is between 0 C and 40 C (32 F and 104 F). DRAFT 6 - 14 WT41N0 User Guide Table 6-4 Troubleshooting the Single Slot USB Cradle (Continued) Symptom During data communications, no data was transmitted, or transmitted data was incomplete. Possible Cause Wearable terminal removed from cradle during communications. Incorrect cable configuration. Communications software is not installed or configured properly. Replace wearable terminal in cradle and retransmit. Solution See the System Administrator. Perform setup as described in the WT41N0 Integrator Guide. Ensure that Microsoft ActiveSync 4.1 or greater is installed on the host computer. Cannot ActiveSync with Host Computer Wrong USB cable used. Ensure that the cable has a USB A connector on one end and a USB mini B connector on the other end. Host computer not configured properly. Ensure that ActiveSync on the host computer is set to allow USB connections. The wearable terminal is not fully seated in the cradle. Remove and re-insert the wearable terminal into the cradle, ensuring it is firmly seated. DRAFT APPENDIX ASPECIFICATIONS Technical Specifications The following tables summarize the wearable terminals intended operating environment and general technical hardware specifications. Wearable Terminal The following table summarizes the wearable terminals intended operating environment. Table A-1 Technical Specifications Item Description Physical and Environmental Characteristics Dimensions With standard battery: 5.7 inches L x 3.7 inches W x 1.0 inch H (14.2 cm L x 9.3 cm W x 2.6 cm H) With extended battery: 5.7 inches L x 4.2 inches W x 1.0 inch H (14.2 cm W x 10.7 cm H x 2.6 cm D) With standard battery: 11.3 oz. (320 g) With extended battery: 12.2 oz. (345 g). WT41N0: Two-color Alphanumeric Keypad Voice Only WT41N0: Three programmable function keys WT41N0: Color 2.8 inch QVGA non-touch or touch screens Voice Only WT41N0: None Removable, rechargeable 3.7 VDC Lithium Ion battery. Standard capacity: 2330 mAh (minimum) Extended capacity: 4600 mAh (minimum) Two NiMH batteries (rechargeable) 15 mAh 2.4 VDC (not user accessible) OMAP 4 processor at 1 GHz Microsoft Windows CE 7.0 Professional Weight Keyboard Display Main Battery Backup Battery Performance Characteristics CPU Operating System DRAFT A - 2 WT41N0 User Guide Table A-1 Technical Specifications (Continued) Item Memory Application Development Data Capture Options User Environment Operating Temperature Storage Temperature Battery Charging Temperature Humidity Drop Specification Tumble Environmental Sealing ESD Description 2 GB Flash/512 MB RAM PSDK, DCP and EMDK RS309 scanner RS409 scanner RS419 scanner RS507 Hands-free imager
-4 F to 122F (-20 C to 50 C)
-40 F to 158 F (-40 C to 70 C) 32 F to 104 F (0 C to +40 C) ambient temperature range. 5% to 95% non condensing Multiple 4 ft.(1.2 m) drops to concrete across operating temperature range 500 half-meter tumbles at room temperature (1,000 drops) IP54 Category 2 15k VDC air discharge 8k VDC direct discharge 8k VDC indirect discharge WLAN Wireless Data Communications WLAN radio Operating Channels Security Voice Communication Output Power Data Rate Frequency Range 802.11a/b/g/n Channel 8 - 169 (5040 - 5845 MHz) (4920 - 4980 MHz) Japan only Channel 1 - 13 (2412 - 2472 MHz) Channel 14 (2484 MHz) Japan only Actual operating frequencies depend on regulatory rules and certification agency WPA2, WEP (40 or 128 bit), TKIP, TLS, TTLS (MS-CHAP), TTLS (MS-CHAP v2), TTLS (CHAP), TTLS-MD5, TTLS-PAP, PEAP-TLS, PEAP (MS-CHAP v2), AES, LEAP, CCX v3 Runs voice recognition engines and text-to-speech engines for voice picking applications 100 mW U.S. and International 802.11a: up to 54Mb per second 802.11b: up to 11Mb per second 802.11g: up to 54Mb per second 802.11a: 5 GHz; country-dependent 802.11b: 2.4 GHz; country-dependent 802.11g: 2.4 GHz; country-dependent Internal Antenna WPAN Wireless Data Communications Bluetooth Bluetooth Version 1.2 DRAFT Specifications A - 3 Table A-1 Technical Specifications (Continued) Item Peripherals and Accessories Cradles Printers Charger Other Accessories RS309 Scanner Description Single Slot USB Four Slot Ethernet Supports extensive line of approved printers, cables and accessories Four Slot Battery Charger Headset adapter, freezer pouch, hip mount and wrist mount. Table A-2 RS309 Technical Specifications Item Description Physical and Environmental Characteristics Dimensions (standard version without cables attached) 2.7 inch L x 2.4 inch W x 1.5 inch H
(6.8 cm L x 6.1 cm H x 3.8 cm) 3.525 oz. (98 gm) Weight (standard version without cables attached) Current Standby Current Voltage Vcc Noise Level Performance Characteristics Light Source Scan Rate Nominal Working Distance Yaw Roll Pitch User Environment Operating Temperature Storage Temperature Humidity Drop Specification Environmental Sealing 140 mA typical, 180 mA max 60 A max 3.1 to 3.6 VDC 200 mV p-p max. 650 nm LASER, 1.06 mW 35 ( 5) scans/sec (bidirectional) 7.5 mil 13 mil Density5 mil 39 UPC Code Type39 Far (inches)7 20.25 9.75 Far (inches)9.5 15.25 27.25 50 degrees from normal 20 degrees from vertical 65 degrees from normal 20 mil 39 29.25 42.5 55 mil 39 54.5 84.75
(Guaranteed)
(Typical)
-22 F to 122 F (-30 C to 50 C)
-40 F to 140 F (-40 C to 60 C) 5% to 95% non condensing 4 ft.(1.8m) drop to concrete IP54 sealing DRAFT A - 4 WT41N0 User Guide Table A-2 RS309 Technical Specifications (Continued) Item Ambient Light Immunity Description Indoor: 450 foot-candles (4,844 lux) Outdoor: 8,000 foot-candles (86,111 lux) Regulatory Electrical Safety EMI/RFI Laser Safety Laser Decode Capability Certified to CSA C22.2 No. 60950-1, EN60950-1, IEC 60950-1 FCC Part 15 Class B, ICES-003 Class B, European Union EMC and R&TTE Directives, Australian AS/NZS 4268 CDRH Class II, IEC 60825-1 Class 2 Code 39 Codabar Interleaved 2 of 5 MSI UPC/EAN supplementals Webcode Code 93 Discrete 2 of 5 EAN-13 UPCE Trioptic 39 RSS Code 128 Code 11 EAN-8 UPCA Coupon Code Chinese 2 of 5 RS409 Scanner Table A-3 RS409 Technical Specifications Item Description Physical and Environmental Characteristics Dimensions 1.9 in. L x 1.4 in. W x 1.9 in. H
(4.8 cm L x 3.6 cm H x 4.8 cm H) 2.0 oz. (56.7 gm) Weight (standard version without cables attached) Current Standby Current Voltage Vcc Noise Level Performance Characteristics Light Source Scan Rate Nominal Working Distance Yaw Roll Pitch User Environment 92 mA typical, 121 mA max 12A typical/60 A max 3.1 to 3.6 VDC 100 mV p-p max. 650 nm LASER, 1.55 mW 104 ( 12) scans/sec (bidirectional) Density Code Type Far (inches) Far (inches) 50 degrees from normal 35 degrees from vertical 65 degrees from normal 5 mil 7.5 mil 39 4.75 8.75 39 8.75 14.25 10 mil 13 mil 39 UPC 13.25 17.25 24.25 20 mil 40 mil 39 21.5 35.75 39 22.25 55 mil 39 27 50.5
(Guaranteed)
(Typical) DRAFT Table A-3 RS409 Technical Specifications (Continued) Specifications A - 5 Description
-4 F to 122 F (-20 C to 50 C)
-25 F to 160 F (-40 C to 70 C) 5% to 95% non condensing 4 ft.(1.8m) drop to concrete IP54 sealing Indoor: 450 foot-candles (4,844 lux) Outdoor: 8,000 foot-candles (86,111 lux) Item Operating Temperature Storage Temperature Humidity Drop Specification Environmental Sealing Ambient Light Immunity Regulatory Electrical Safety EMI/RFI Certified to CSA C22.2 No. 60950-1, EN60950-1, IEC 60950-1 FCC Part 15 Class B, ICES-003 Class B, European Union EMC and R&TTE Directives, Australian AS/NZS 4268 CDRH Class II, IEC 60825-1 Class 2 Code 128 Code 11 EAN-8 UPCA Laser Safety Laser Decode Capability Code 39 Codabar Interleaved 2 of 5 MSI UPC/EAN supplementals Coupon Code Chinese 2 of 5 Webcode Code 93 Discrete 2 of 5 EAN-13 UPCE Trioptic 39 RSS RS419 Scanner Table A-4 RS419 Technical Specifications Item Description Physical and Environmental Characteristics Dimensions 1.9 in. L x 1.4 in. W x 1.9 in. H
(4.8 cm L x 3.6 cm H x 4.8 cm H) 2.0 oz. (56.7 gm) 92 mA typical, 121 mA max 12A typical/60 A max 3.1 to 3.6 VDC 100 mV p-p max. Weight (standard version without cables attached) Current Standby Current Voltage Vcc Noise Level Performance Characteristics Light Source Scan Rate Nominal Working Distance 650 nm LASER, 1.55 mW 104 ( 12) scans/sec (bidirectional) Density Code Type Far (inches) Far (inches) 5 mil 7.5 mil 39 1.20 12.5 39 1.10 18.5 10 mil 13 mil UPC 128 1.20 1.60 27.0 19.0 20 mil 55 mil 39 1.40 52.0 39
-
100 100 mil Reflective 39 24 204 DRAFT A - 6 WT41N0 User Guide Table A-4 RS419 Technical Specifications (Continued) Description 50 degrees from normal 35 degrees from vertical 65 degrees from normal
-4 F to 122 F (-20 C to 50 C)
-25 F to 160 F (-40 C to 70 C) 5% to 95% non condensing 4 ft.(1.8m) drop to concrete IP54 sealing Indoor: 450 foot-candles (4,844 lux) Outdoor: 8,000 foot-candles (86,111 lux) Item Yaw Roll Pitch User Environment Operating Temperature Storage Temperature Humidity Drop Specification Environmental Sealing Ambient Light Immunity Regulatory Electrical Safety EMI/RFI Certified to CSA C22.2 No. 60950-1, EN60950-1, IEC 60950-1 FCC Part 15 Class B, ICES-003 Class B, European Union EMC and R&TTE Directives, Australian AS/NZS 4268 CDRH Class II, IEC 60825-1 Class 2 Laser Safety Laser Decode Capability Code 39 Codabar Interleaved 2 of 5 MSI UPC/EAN supplementals Webcode Code 128 Code 11 EAN-8 UPCA Coupon Code Chinese 2 of 5 Code 93 Discrete 2 of 5 EAN-13 UPCE Trioptic 39 RSS RS507 Scanner Table A-5 RS507 Technical Specifications Item Description Physical and Environmental Characteristics Dimensions Weight (standard version without cables attached) Triggerless, standard battery: 2.9 x 5.3 x 7.4 cm (1.16 x 2.1 x 2.92 in.) Triggerless, extended battery: 3.6 x 5.3 x 7.4 cm (1.42 x 2.1 x 2.92 in.) Triggered, standard battery: 2.9 x 5.3 x 7.4 cm (1.16 x 2.1 x 2.92 in.) Triggered, corded (cord length not included): 3.3 x 5.3 x 7.4 cm (1.3 x 2.1 x 2.92 in.) Triggerless, standard battery: 121.4 g (4.3 oz.) Triggerless, extended battery: 146.4 g (5.2 oz.) Triggered, standard battery: 134.8 g (4.8 oz.) Triggered, corded: 140.8 g (5.0 oz.) Performance Characteristics Optical Resolution Skew WVGA 752 H x 480 V pixels (gray scale) 60 from normal DRAFT Table A-5 RS507 Technical Specifications (Continued) Item Roll Pitch Aiming Element Illumination Element Field of View Nominal Working Distance Ambient Light Immunity Motion Tolerance Supported Symbologies Specifications A - 7 Description 360 60 from normal 655 nm 10 nm Visible Laser Diode 637 nm 5 nm Red LEDs Horizontal: 39.6; Vertical: 25.7 Density 1D Code Type 39 2 Near Far 7.4 5 mil 7.5 mil 39 10.5 20 mil 39 24.6 13 mil UPC 1.5 15.4 10 15 mil PDF417 10 mil PDF417 6.67 mil Density 2D Code Type PDF417 3.3 Near Far 7.0 From total darkness Indoor: 450 ft. candles (4,845 lux). Outdoor: 9,000 ft. candles (96,900 lux). 63.5 cm (25 inches) per second, typical. 1D enabled by default:
Codabar, Code 39, Code 128, EAN-13, EAN-8, Interleaved 2 of 5, UPC-A and UPC-E. 14.6 Additionally supported by 1D:
Code 11, Code 32 Pharmaceutical (PARAF), Code 93, MSI, Reduced Space Symbology (RSS-14, RSS Limited, RSS Expanded), Straight 2 of 5 IATA (two-bar start/stop), Straight 2 of 5 Industrial (three-bar start/stop), Trioptic, UPC-E1. 2D enabled by default:
4-CB (4-State Customer Bar code), Aztec, MicroPDF417, PDF417, MaxiCode. Additionally supported by 2D:
Australian Post, British Post (4 state code and infomail), Data Matrix, Japanese Post, KIX (Netherlands) Post, Planet Code, Postnet, QR Code, EAN/UCC Composite, TCIF Linked Code 39 (TLC39). option. Cordless:
Bluetooth: Class II, v 2.1 with Adaptive Frequency Hopping (AFH). Supported profiles: Serial Port Profile (SPP), Human Interface Device Profile (HID), Service Discovery Application Profile (SDAP). Pairing: by reading terminal BT address as bar code off the display or from a printed label. Corded (to WT41N0): Serial. Supported Aiming Modes Class 2 Laser, cross hair with bright center for sunlight visibility; Pick List mode Interface DRAFT A - 8 WT41N0 User Guide Table A-5 RS507 Technical Specifications (Continued) Item Field Replaceable Parts User Interface LED Beeper Restore Key Scan Triggering User Environment Operating Temperature Storage Temperature Humidity Drop Specification Environmental Sealing Electrostatic Discharge
(ESD) Power Cordless Corded Regulatory Electrical Safety EMI/RFI Laser Safety RoHS Batteries, corded adaptor, trigger clamp, triggerless clamp, comfort pad, straps and strap buckle. Description Two (parallel), multi color, rear left and rear right. Rear center, up to 80 dBA SPL @ 10 cm. User accessible for emergency boot up and Bluetooth reconnect (after excessive disconnection period). Manual or automatic using Interactive Sensing Technology (IST).
-20 C to 55 C (-4 F to 131 F)
-40 to 70 C (-40 to 158 F) excluding battery
-40 to 60 C (-40 to 140 F) including battery 5% to 85% non condensing 1.8 m (6 ft.) multiple drops to concrete across operating temperature range. IP54 15kV air discharge, 8kV direct discharge. Standard battery: Li-Ion 970 mAh, 3.7 V with up to 35,000 scans (continuous) or up to 10 hours with 900 scans per hour on a single charge using fresh batteries. Extended battery: Li-Ion 1940 mAh, 3.7 V with up to 70,000 scans (continuous) or up to 20 hours with 900 scans per hour on a single charge using fresh batteries. Corded adaptor to WT41N0. Certified to UL60950-1, CSA C22.2 No. 60950-1, EN60950-1, IEC 60950-1. FCC Part 15 Class B, ICES-003 Class B, European Union EMC and R&TTE Directives, Australian AS/NZS 60950.1 CDRH Class II, IEC 60825-1 Class 2 Compliance with RoHS standards. DRAFT GLOSSARY A API. An interface by means of which one software component communicates with or controls another. Usually used to refer to services provided by one software component to another, usually via software interrupts or function calls Application Programming Interface. See API. ANSI Terminal. A display terminal that follows commands in the ANSI standard terminal language. For example, it uses escape sequences to control the cursor, clear the screen and set colors. Communications programs support the ANSI terminal mode and often default to this terminal emulation for dial-up connections to online services. ASCII. American Standard Code for Information Interchange. A 7 bit-plus-parity code representing 128 letters, numerals, punctuation marks and control characters. It is a standard data transmission code in the U.S. B Bar. The dark element in a printed bar code symbol. Bar Code. A pattern of variable-width bars and spaces which represents numeric or alphanumeric data in machine-readable form. The general format of a bar code symbol consists of a leading margin, start character, data or message character, check character (if any), stop character, and trailing margin. Within this framework, each recognizable symbology uses its own unique format. See Symbology. Bit. Binary digit. One bit is the basic unit of binary information. Generally, eight consecutive bits compose one byte of data. The pattern of 0 and 1 values within the byte determines its meaning. Bits per Second (bps). Bits transmitted or received. Bit. Binary digit. One bit is the basic unit of binary information. Generally, eight consecutive bits compose one byte of data. The pattern of 0 and 1 values within the byte determines its meaning. bps. See Bits Per Second. DRAFT Glossary - 2 WT41N0 User Guide Byte. On an addressable boundary, eight adjacent binary digits (0 and 1) combined in a pattern to represent a specific character or numeric value. Bits are numbered from the right, 0 through 7, with bit 0 the low-order bit. One byte in memory is used to store one ASCII character. boot or boot-up. The process a computer goes through when it starts. During boot-up, the computer can run self-diagnostic tests and configure hardware and software. C CDRH. Center for Devices and Radiological Health. A federal agency responsible for regulating laser product safety. This agency specifies various laser operation classes based on power output during operation. CDRH Class 1. This is the lowest power CDRH laser classification. This class is considered intrinsically safe, even if all laser output were directed into the eye's pupil. There are no special operating procedures for this class. CDRH Class 2. No additional software mechanisms are needed to conform to this limit. Laser operation in this class poses no danger for unintentional direct human exposure. Character. A pattern of bars and spaces which either directly represents data or indicates a control function, such as a number, letter, punctuation mark, or communications control contained in a message. Codabar. A discrete self-checking code with a character set consisting of digits 0 to 9 and six additional characters:
(-$:/,+). Code 128. A high density symbology which allows the controller to encode all 128 ASCII characters without adding extra symbol elements. Code 3 of 9 (Code 39). A versatile and widely used alphanumeric bar code symbology with a set of 43 character types, including all uppercase letters, numerals from 0 to 9 and 7 special characters (space, minus (-), plus (+), period (.), dollar sign ($), slash (/), and percent (%)). The code name is derived from the fact that 3 of 9 elements representing a character are wide, while the remaining 6 are narrow. Code 93. An industrial symbology compatible with Code 39 but offering a full character ASCII set and a higher coding density than Code 39. Cold Boot. A cold boot restarts the wearable terminal and erases all user stored records and entries. COM port. Communication port; ports are identified by number, e.g., COM1, COM2. Cradle. A cradle is used for charging the terminal battery and for communicating with a host computer, and provides a storage place for the terminal when not in use. D DCP. See Device Configuration Package. Decode. To recognize a bar code symbology (e.g., UPC/EAN) and then analyze the content of the specific bar code scanned. DRAFT Glossary - 3 Decode Algorithm. A decoding scheme that converts pulse widths into data representation of the letters or numbers encoded within a bar code symbol. Decryption. Decryption is the decoding and unscrambling of received encrypted data. Also see, Encryption and Key. Depth of Field. The range between minimum and maximum distances at which a scanner can read a symbol with a certain minimum element width. Device Configuration Package. The Symbol Device Configuration Package provides the Product Reference Guide
(PRG), flash partitions, Terminal Configuration Manager (TCM) and the associated TCM scripts. With this package hex images that represent flash partitions can be created and downloaded to the wearable terminal. Discrete 2 of 5. A binary bar code symbology representing each character by a group of five bars, two of which are wide. The location of wide bars in the group determines which character is encoded; spaces are insignificant. Only numeric characters (0 to 9) and START/STOP characters may be encoded. E EAN. European Article Number. This European/International version of the UPC provides its own coding format and symbology standards. Element dimensions are specified metrically. EAN is used primarily in retail. ENQ (RS-232). ENQ software handshaking is also supported for the data sent to the host. ESD. Electro-Static Discharge F Flash Disk. An additional megabyte of non-volatile memory for storing application and configuration files. Flash Memory. Flash memory is nonvolatile, semi-permanent storage that can be electronically erased in the circuit and reprogrammed. Wearable terminals use Flash memory to store the operating system (ROM-DOS), the terminal emulators, and the Citrix ICA Client for DOS. File Transfer Protocol (FTP). A TCP/IP application protocol governing file transfer via network or telephone lines. See TCP/IP. FTP. See File Transfer Protocol. Flash Memory. Flash memory is responsible for storing the system firmware and is non-volatile. If the system power is interrupted the data is not be lost. H Hard Reset. See Cold Boot. Hz. Hertz; A unit of frequency equal to one cycle per second. DRAFT Glossary - 4 WT41N0 User Guide Host Computer. A computer that serves other terminals in a network, providing such services as computation, database access, supervisory programs and network control. I IEC. International Electrotechnical Commission. This international agency regulates laser safety by specifying various laser operation classes based on power output during operation. IEC (825) Class 1. This is the lowest power IEC laser classification. Conformity is ensured through a software restriction of 120 seconds of laser operation within any 1000 second window and an automatic laser shutdown if the scanner's oscillating mirror fails. IEEE Address. See MAC Address. Interleaved 2 of 5. A binary bar code symbology representing character pairs in groups of five bars and five interleaved spaces. Interleaving provides for greater information density. The location of wide elements
(bar/spaces) within each group determines which characters are encoded. This continuous code type uses no intercharacter spaces. Only numeric (0 to 9) and START / STOP characters may be encoded. IOCTL. Input/Output Control. Interleaved Bar Code. A bar code in which characters are paired together, using bars to represent the first character and the intervening spaces to represent the second. Interleaved 2 of 5. A binary bar code symbology representing character pairs in groups of five bars and five interleaved spaces. Interleaving provides for greater information density. The location of wide elements (bar/spaces) within each group determines which characters are encoded. This continuous code type uses no intercharacter spaces. Only numeric (0 to 9) and START/STOP characters may be encoded. Internet Protocol Address. See IP. I/O Ports. interface The connection between two devices, defined by common physical characteristics, signal characteristics, and signal meanings. Types of interfaces include RS-232 and PCMCIA. Input/Output Ports. I/O ports are primarily dedicated to passing information into or out of the terminals memory. Wearable terminals include Serial and USB ports. IP. Internet Protocol. The IP part of the TCP/IP communications protocol. IP implements the network layer (layer 3) of the protocol, which contains a network address and is used to route a message to a different network or subnetwork. IP accepts packets from the layer 4 transport protocol (TCP or UDP), adds its own header to it and delivers a datagram to the layer 2 data link protocol. It may also break the packet into fragments to support the maximum transmission unit (MTU) of the network. IP Address. (Internet Protocol address) The address of a computer attached to an IP network. Every client and server station must have a unique IP address. A 32-bit address used by a computer on a IP network. Client workstations have either a permanent address or one that is dynamically assigned to them each session. IP addresses are written as four sets of numbers separated by periods; for example, 204.171.64.2. IPX/SPX. Internet Package Exchange/Sequential Packet Exchange. A communications protocol for Novell. IPX is Novells Layer 3 protocol, similar to XNS and IP, and used in NetWare networks. SPX is Novell's version of the Xerox SPP protocol. DRAFT Glossary - 5 IS-95. Interim Standard 95. The EIA/TIA standard that governs the operation of CDMA cellular service. Versions include IS-95A and IS-95B. See CDMA. K Key. A key is the specific code used by the algorithm to encrypt or decrypt the data. Also see, Encryption and Decrypting. L laser scanner. A type of bar code reader that uses a beam of laser light. LASER. Light Amplification by Stimulated Emission of Radiation.The laser is an intense light source. Light from a laser is all the same frequency, unlike the output of an incandescent bulb. Laser light is typically coherent and has a high energy density. LCD. See Liquid Crystal Display. LED Indicator. A semiconductor diode (LED - Light Emitting Diode) used as an indicator, often in digital displays. The semiconductor uses applied voltage to produce light of a certain frequency determined by the semiconductor's particular chemical composition. Liquid Crystal Display (LCD). A display that uses liquid crystal sealed between two glass plates. The crystals are excited by precise electrical charges, causing them to reflect light outside according to their bias. They use little electricity and react relatively quickly. They require external light to reflect their information to the user. Light Emitting Diode. See LED. M MDN. Mobile Directory Number. The directory listing telephone number that is dialed (generally using POTS) to reach a mobile unit. The MDN is usually associated with a MIN in a cellular telephone -- in the US and Canada, the MDN and MIN are the same value for voice cellular users. International roaming considerations often result in the MDN being different from the MIN. MIL. 1 mil = 1 thousandth of an inch. MIN. Mobile Identification Number. The unique account number associated with a cellular device. It is broadcast by the cellular device when accessing the cellular system. N Nominal. The exact (or ideal) intended value for a specified parameter. Tolerances are specified as positive and negative deviations from this value. DRAFT Glossary - 6 WT41N0 User Guide O Open Data-Link Interface (ODI). Novells driver specification for an interface between network hardware and higher-level protocols. It supports multiple protocols on a single NIC (Network Interface Controller). It is capable of understanding and translating any network information or request sent by any other ODI-compatible protocol into something a NetWare client can understand and process. Open System Authentication. Open System authentication is a null authentication algorithm. P PAN . Personal area network. Using Bluetooth wireless technology, PANs enable devices to communicate wirelessly. Generally, a wireless PAN consists of a dynamic group of less than 255 devices that communicate within about a 33-foot range. Only devices within this limited area typically participate in the network. Parameter. A variable that can have different values assigned to it. PING. (Packet Internet Groper) An Internet utility used to determine whether a particular IP address is online. It is used to test and debug a network by sending out a packet and waiting for a response. Print Contrast Signal (PCS). Measurement of the contrast (brightness difference) between the bars and spaces of a symbol. A minimum PCS value is needed for a bar code symbol to be scannable. PCS = (RL - RD) / RL, where RL is the reflectance factor of the background and RD the reflectance factor of the dark bars. Q QWERTY. A standard keyboard commonly used on North American and some European PC keyboards. QWERTY refers to the arrangement of keys on the left side of the third row of keys. R RAM. Random Access Memory. Data in RAM can be accessed in random order, and quickly written and read. Resolution. The narrowest element dimension which is distinguished by a particular reading device or printed with a particular device or method. RF. Radio Frequency. ROM. Read-Only Memory. Data stored in ROM cannot be changed or removed. Router. A device that connects networks and supports the required protocols for packet filtering. Routers are typically used to extend the range of cabling and to organize the topology of a network into subnets. See Subnet. RS-232. An Electronic Industries Association (EIA) standard that defines the connector, connector pins, and signals used to transfer data serially from one device to another. DRAFT Glossary - 7 S Scan Area. Area intended to contain a symbol. Scanner. An electronic device used to scan bar code symbols and produce a digitized pattern that corresponds to the bars and spaces of the symbol. Its three main components are:
1. Light source (laser or photoelectric cell) - illuminates a bar code. 2. Photodetector - registers the difference in reflected light (more light reflected from spaces). 3. Signal conditioning circuit - transforms optical detector output into a digitized bar pattern. SDK. Software Development Kit Secure Sockets Layer (SSL). SSL is a commonly-used protocol for managing the security of a message transmission on the Internet. SSL uses a program layer located between the Internet's Hypertext Transfer Protocol (HTTP) and Transport Control Protocol (TCP) layers. SSL is included as part of both the Microsoft and Netscape browsers and most Web server products. Developed by Netscape, SSL also gained the support of Microsoft and other Internet client/server developers as well and became the de facto standard until evolving into Transport Layer Security. The sockets part of the term refers to the sockets method of passing data back and forth between a client and a server program in a network or between program layers in the same computer. SSL uses the public-and-private key encryption system from RSA, which also includes the use of a digital certificate. Shared Key. Shared Key authentication is an algorithm where both the AP and the MU share an authentication key. SID. System Identification code. An identifier issued by the FCC for each market. It is also broadcast by the cellular carriers to allow cellular devices to distinguish between the home and roaming service. SMDK. Symbol Mobility Developers Kit. Soft Reset. See Warm Boot. Subnet. A subset of nodes on a network that are serviced by the same router. See Router. Subnet Mask. A 32-bit number used to separate the network and host sections of an IP address. A custom subnet mask subdivides an IP network into smaller subsections. The mask is a binary pattern that is matched up with the IP address to turn part of the host ID address field into a field for subnets. Default is often 255.255.255.0. Substrate. A foundation material on which a substance or image is placed. Symbol. A scannable unit that encodes data within the conventions of a certain symbology, usually including start/stop characters, quiet zones, data characters and check characters. Symbology. The structural rules and conventions for representing data within a particular bar code type (e.g. UPC/EAN, Code 39, PDF417, etc.). T TCP/IP. (Transmission Control Protocol/Internet Protocol) A communications protocol used to internetwork dissimilar systems. This standard is the protocol of the Internet and has become the global standard for communications. TCP provides transport functions, which ensures that the total amount of bytes sent is received correctly at the other end. UDP is an alternate transport that does not guarantee delivery. It is widely used for real-time voice and video transmissions where erroneous packets are not retransmitted. IP provides the routing mechanism. TCP/IP is a DRAFT Glossary - 8 WT41N0 User Guide routable protocol, which means that all messages contain not only the address of the destination station, but the address of a destination network. This allows TCP/IP messages to be sent to multiple networks within an organization or around the world, hence its use in the worldwide Internet. Every client and server in a TCP/IP network requires an IP address, which is either permanently assigned or dynamically assigned at startup. Telnet. A terminal emulation protocol commonly used on the Internet and TCP/IP-based networks. It allows a user at a terminal or computer to log onto a remote device and run a program. Terminal. See Wearable Terminal. Terminal Emulation. A terminal emulation emulates a character-based mainframe session on a remote non-mainframe terminal, including all display features, commands and function keys. The WT41N0 Series supports Terminal Emulations in 3270, 5250 and VT220. TFTP. (Trivial File Transfer Protocol) A version of the TCP/IP FTP (File Transfer Protocol) protocol that has no directory or password capability. It is the protocol used for upgrading firmware, downloading software and remote booting of diskless devices. Tolerance. Allowable deviation from the nominal bar or space width. Transmission Control Protocol/Internet Protocol. See TCP/IP. Transport Layer Security (TLS). TLS is a protocol that ensures privacy between communicating applications and their users on the Internet. When a server and client communicate, TLS ensures that no third party may eavesdrop or tamper with any message. TLS is the successor to the Secure Sockets Layer (SSL). Trivial File Transfer Protocol. See TFTP. U UPC. Universal Product Code. A relatively complex numeric symbology. Each character consists of two bars and two spaces, each of which is any of four widths. The standard symbology for retail food packages in the United States. UDP. User Datagram Protocol. A protocol within the IP protocol suite that is used in place of TCP when a reliable delivery is not required. For example, UDP is used for real-time audio and video traffic where lost packets are simply ignored, because there is no time to retransmit. If UDP is used and a reliable delivery is required, packet sequence checking and error notification must be written into the applications. U Visible Laser Diode (VLD). A solid state device which produces visible laser light. W Warm Boot. A warm boot restarts the wearable terminal by closing all running programs. All data that is not saved to flash memory is lost. DRAFT Wearable Terminal. In this text, wearable terminal refers to the Symbol WT41N0 that can be set up to communicate with a network, using wireless radio technology. Glossary - 9 DRAFT Glossary - 10 WT41N0 User Guide DRAFT INDEX Numerics 1-D bar codes . 3-1 2-D bar codes . 3-3 A accessories EMDK . 5-2 four slot cradles battery charging . 5-5 four slot Ethernet cradle . 5-5 LED indicators . 5-6 four slot Ethernet/USB cradle . 5-1 four slot spare battery charger . 5-1 serial/USB cradle . 5-1 single slot serial/USB cradle . 5-3 LED indicators . 5-4, 5-7 spare battery charger . 5-7 power connection . 5-7 B backlight . 2-12 backup battery . 2-9 charging . 1-7 bar codes battery one dimensional . 3-1 two dimensional . 3-3 backup charging . 1-7 charging . 1-7 installing . 1-6 removing . 1-8 battery charging four slot cradles . 5-5 battery charging temperature . A-2 battery health . 2-19 battery icon . 2-9 battery status . 2-9 boot cold . 1-13, 2-1, 2-17, 2-18 warm . 2-1, 2-17 bullets . xii buttons power . 2-1 C characters, special . 2-5 charging spare batteries . 1-8 charging batteries . 1-7 charging spare batteries . 1-8 cleaning . 6-1 cold boot . 1-13, 2-1, 2-17, 2-18 configuration . x configurations . x conventions notational . xi CPU . A-1 cradles four slot cradles battery charging . 5-5 four slot Ethernet . 5-5 four slot Ethernet cradle LED indicators . 5-6 four slot Ethernet/USB . 5-1 serial/USB . 5-1 single slot . 5-3 LED indicators . 5-4, 5-7 spare battery charger . 5-7 power connection . 5-7 current time . 2-9 DRAFT Index - 2 WT41N0 User Guide D data capture . x adjusting the distance . 3-2 imager operational modes decode mode . 3-3 image capture mode . 3-3 pick list mode . 3-3 imaging . 3-3 indicator . 3-2 laser scanning . 3-1 one dimensional bar codes . 3-1 scan angle . 3-1 scan range . 3-1 scanning . 3-2, 3-3 two dimensional bar codes . 3-3 date/time . 2-9, 2-12 DCP for WT4090c50 . xii Device Configuration Package . 5-2 Device Configuration Package for WT4090c50 . xii dimensions . A-1, A-3, A-4, A-5, A-6 display . x, 2-12, A-1 drop specification . A-2, A-3, A-5, A-6, A-8 E electrical safety . A-4, A-5, A-6, A-8 EMDK for eVC4 . xii Enterprise Mobility Developer Kit See EMDK . 5-2 Enterprise Mobility Developer Kit for eVC4 . xii F four slot cradles battery charging . 5-5 four slot Ethernet cradle . 5-5 LED indicators . 5-6 four slot Ethernet/USB . 5-1 four slot spare battery charger . 5-1 G getting started . 1-6 H hard reset . 1-13, 2-1, 2-17, 2-18 health of battery . 2-19 humidity . A-2, A-3, A-5, A-6, A-8 I icon battery status . 2-9 icons alpha mode . 2-10 ALT . 2-10 CTRL . 2-10 function . 2-10 shift . 2-10 imager. See data capture, imaging imaging . 3-3 information, service . xii installing main battery . 1-6 K key descriptions two-color alphanumeric . 2-4 keyboard . A-1 keypads . x double-tap . 2-4 types . 2-4 voice only . 2-7 L laser safety . A-4, A-5, A-6, A-8 laser scanning See data capture . 3-1 LED . 2-2 LEDs scan and decode . 3-3 lithium-ion battery . 1-3 M main battery charging . 1-6, 1-7 installing . 1-6 maintenance . 6-1 memory . x, A-2 MSP Agent . 2-11 O operating environment, wearable terminal . A-1 operating system . x, A-1 operating temperature . A-2, A-3, A-5, A-6, A-8 P parts of the wearable terminal . 1-1, 1-2, 1-4, 1-5 power . 2-2, 2-12 power button . 2-1 power LED . 2-2 program menu . 2-10 DRAFT Index - 3 four slot spare battery charger . 6-12 single slot serial/USB cradle . 6-13 wearable terminal . 6-7 U unpacking . 1-3 USB port . 2-12 W warm boot . 2-1, 2-11, 2-17 wearable terminal power on . 2-1 starting . 1-13 weight . A-1, A-3, A-4, A-5, A-6 Windows CE .NET 7.0 Professional . 2-10 wireless status icon . 2-10 WLAN 802.11a/b/g . x WLAN status . 2-10 WPAN Bluetooth . x R radios . x rapid deployment . 2-11 regional settings . 2-12 related documents . xii related software . xii removing main battery . 1-8 reset hard . 1-13, 2-1, 2-17, 2-18 soft . 2-1, 2-17 resetting . 2-17 S scan status . 3-2 scan status See also data capture scanning bar codes . 3-2 imaging . 3-3 LED indicators . 3-2 See data capture . 3-1 screen Symbol splash screen . 1-14 serial/USB cradle . 5-1 service information . xii single slot serial/USB cradle . 5-3 LED indicators . 5-4, 5-7 soft reset . 2-1, 2-17 spare batteries charging . 1-8 spare battery charging . 1-8 spare battery charger . 5-7 power connection . 5-7 special characters . 2-5 specifications . A-1 starting the wearable terminal . 1-6, 1-13 status . 2-9 status icon . 2-9 status icons Windows CE 5.0 . 2-9 storage temperature . A-2, A-3, A-5, A-6, A-8 suspend . 1-8, 2-1 system information . 2-12 T taskbar . 2-9 technical specifications, wearable terminal . A-1 terminal charging . 2-9 terminal charging . 2-9 troubleshooting . 6-7 DRAFT Index - 4 WT41N0 User Guide DRAFT DRAFT Motorola Solutions, Inc. 1301 E. Algonquin Rd. Schaumburg, IL 60196-1078, U.S.A. http://www.motorolasolutions.com MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. 2012 Motorola Solutions, Inc. All Rights Reserved. 72E-159561-01 Revision 1 - February 2012 DRAFT
1 2 3 4 5 6 7 | User Manual Statements | Users Manual | 890.42 KiB | December 11 2012 |
WT41N0 REGULATORY GUIDE Motorola reserves the right to make changes to any product to improve reliability, function, or design. Motorola does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, apparatus, machine, material, method, or process in which Motorola products might be used. An implied license exists only for equipment, circuits, and subsystems contained in Motorola products. Warranty For the complete Motorola hardware product warranty statement, go to: http://www.motorolasolutions.com/warranty. Service Information If you have a problem using the equipment, contact your facilitys Technical or Systems Support. If there is a problem with the equipment, they will contact the Motorola Enterprise Mobility Support at: http://www.motorolasolutions.com/support. For the latest version of this guide go to: http://
supportcentral.motorola.com. Motorola Solutions, Inc. 1301 E. Algonquin Rd. Schaumburg, IL 60196-1078, U.S.A. http://www.motorolasolutions.com MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. 2012 Motorola Solutions, Inc. All Rights Reserved. 72-159559-01 Rev. B November 2012 Regulatory Information This device is approved under Motorola Solutions, Inc. This guide applies to the following Model Numbers: WT41N0. All Motorola/Symbol devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Local language translations are available at the following website: http://supportcentral.motorola.com. Any changes or modifications to Motorola/Symbol Technologies equipment, not expressly approved by Motorola/Symbol Technologies, could void the user's authority to operate the equipment. CAUTION Only use Motorola/Symbol approved and UL Listed accessories, battery packs and battery chargers. Do NOT attempt to charge damp/wet mobile computers or batteries. All components must be dry before connecting to an external power source. Declared maximum operating temperature: 50C. Bluetooth Wireless Technology This is an approved Bluetooth product. For more information or to view the End Product Listing, please visit http://
www.bluetooth.org/tpg/listings.cfm. Wireless Devices Country Approvals Regulatory markings, subject to certification, are applied to the device signifying the radio(s) is/are approved for use in the following countries: United States, Canada, Japan, China, S. Korea, Australia, and Europe 1. Please refer to the Motorola / Symbol Declaration of Conformity (DoC) for details of other country markings. This is available at http://www.motorola.com/doc. Note 1: For 2.4GHz or 5GHz Products: Europe includes, Austria, Belgium, Bulgaria, Czech Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Country Roaming This device incorporates the International Roaming feature
(IEEE802.11d) which will ensure the product operates on the correct channels for the particular country of use. Ad-Hoc Operation (5 GHz band) Ad-Hoc operation is limited to Channels 36-48 (5150-5250 MHz). Use of this band is restricted to Indoor Use Only, any other use will make the operation of this device illegal. Frequency of Operation - FCC and IC 5 GHz Only The use in the UNII (Unlicensed National Information Infrastructure) band 1 (5150 - 5250 MHz) is restricted to Indoor Use Only; any other use will make the operation of this device illegal. Industry Canada Statement:
Caution: The device for the band 5150 - 5250 MHz is only for indoor usage to reduce potential for harmful interference to co-Channel mobile satellite systems. High power radars are allocated as primary users (meaning they have priority) of 5250 - 5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices. Avertissement: Le dispositive fonctionnant dans la bande 5150 - 5250 MHz est rserv uniquement pour une utilisation l'intrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. Les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., qu'ils ont la priorit) pour les bands 5250 - 5350 MHz et 5650 - 5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. 2.4 GHz Only The available channels for 802.11 b/g operation in the US are Channels 1 to 11. The range of channels is limited by firmware. Health and Safety Recommendations Ergonomic Recommendations CAUTION In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your local Health & Safety Manager to ensure that you are adhering to your companys safety programs to prevent employee injury. Improve work procedures. Reduce or eliminate repetitive motion Maintain a neutral postures Reduce or eliminate excessive force Keep objects that are used frequently within easy reach Perform tasks at correct heights Reduce or eliminate vibration Reduce or eliminate direct pressure Provide adjustable workstations Provide adequate clearance Provide a suitable working environment Vehicle Installation RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (including safety systems). Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. An air bag inflates with great force. DO NOT place objects, including either installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result. Position your device within easy reach. Be able to access your device without removing your eyes from the road. Note: Connection to an alert device that will cause a vehicle horn to sound or lights to flash, on receipt of a call on public roads, is not permitted. IMPORTANT Before installing or using, check state and local laws regarding windshield mounting and use of equipment. For Safe Installation Do not put your phone in a location that obstructs the drivers vision or interferes with the operation of the Vehicle. Do not cover an airbag. Safety on the Road Do not take notes or use the device while driving. Jotting down a to do list or flipping through your address book takes attention away from your primary responsibility, driving safely. When driving a car, driving is your first responsibility - Give full attention to driving. Check the laws and regulations on the use of wireless devices in the areas where you drive. Always obey them. When using a wireless device behind the wheel of a car, practice good common sense and remember the following tips:
1. Get to know your wireless device and any features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road. 2. When available, use a hands free device. 3. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be hazardous. 4. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue. 5. Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations that have the potential to divert your attention from the road. 6. Use your wireless phone to call for help. Dial the Emergency services, (9-1-1 in the US, and 1-1-2 in Europe) or other local emergency number in the case of fire, traffic accident or medical emergencies. Remember, it is a free call on your wireless phone!
The call can be made regardless of any security codes and depending on a network, with or without a SIM card inserted. 7. Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call the Emergency Services, (9-1-1 in the US, and 1-1-2 in Europe) or other local emergency number, as you would want others to do for you. 8. Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-
emergency wireless number. The wireless industry reminds you to use your device /
phone safely when driving. Warnings for Use of Wireless Devices Please observe all warning notices with regard to the usage of wireless devices. Potentially Hazardous Atmospheres - Vehicles Use You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants etc. and areas where the air contains chemicals or particles (such as grain, dust, or metal powders) and any other area where you would normally be advised to turn off your vehicle engine. Safety in Aircraft Switch off your wireless device whenever you are instructed to do so by airport or airline staff. If your device offers a 'flight mode' or similar feature, consult airline staff as to its use in flight. Safety in Hospitals Wireless devices transmit radio frequency energy and may affect medical electrical equipment. Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics or healthcare facilities. These requests are designed to prevent possible interference with sensitive medical equipment. Pacemakers Pacemaker manufacturers recommended that a minimum of 15 cm (6 inches) be maintained between a handheld wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with independent research and recommendations by Wireless Technology Research. Persons with pacemakers:
Should ALWAYS keep the device more than 15 cm (6 inches) from their pacemaker when turned ON. Should not carry the device in a breast pocket. Should use the ear furthest from the pacemaker to minimize the potential for interference. If you have any reason to suspect that interference is taking place, turn OFF your device. Other Medical Devices Please consult your physician or the manufacturer of the medical device, to determine if the operation of your wireless product may interfere with the medical device. RF Exposure Guidelines Safety Information Reducing RF Exposure - Use Properly Only operate the device in accordance with the instructions supplied. International The device complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices. For information on International human exposure to electromagnetic fields refer to the Motorola/Symbol Declaration of Conformity (DoC) at http://
www.motorola.com/doc. Europe Handheld Devices This device was tested for typical body-worn operation. Use only Motorola tested and approved belt-clips, holsters, and similar accessories to ensure EU Compliance. US and Canada Co-located Statement To comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must not be co-located or operating in conjunction with any other transmitter/antenna except those already approved in this filing. Handheld Devices This device was tested for typical body-worn operation. Use only Motorola/Symbol tested and approved belt-clips, holsters, and similar accessories to ensure FCC Compliance. The use of third-party belt-clips, holsters, and similar accessories may not comply with FCC RF exposure compliance requirements, and should be avoided. Batteries Taiwan - Recycling EPA (Environmental Protection Administration) requires dry battery producing or importing firms in accordance with Article 15 of the Waste Disposal Act are required to indicate the recycling marks on the batteries used in sales, giveaway or promotion. Contact a qualified Taiwanese recycler for proper battery disposal. Battery Information Use only Motorola approved batteries. Accessories which have battery charging capability are approved for use with the following battery models:
Motorola BTRY-WT40IAB0E (3.7 VDC, 2330 mAh), WT40IAB0H
(3.7 VDC, 4660 mAh) Motorola/Symbol rechargeable battery packs are designed and constructed to the highest standards within the industry. However, there are limitations to how long a battery can operate or be stored before needing replacement. Many factors affect the actual life cycle of a battery pack, such as heat, cold, harsh environmental conditions and severe drops. When batteries are stored over six (6) months, some irreversible deterioration in overall battery quality may occur. Store batteries at half of full charge in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of metallic parts and electrolyte leakage. When storing batteries for one year or longer, the charge level PRELIMINARY should be verified at least once a year and charged to half of full charge. Replace the battery when a significant loss of run time is detected. Standard warranty period for all Symbol batteries is one year, regardless if the battery was purchased separately or included as part of the mobile computer. For more information on Symbol batteries, please visit: http:/
mysymbolcare.symbol.com/battery/batbasics1.html. Battery Safety Guidelines The area in which the units are charged should be clear of debris and combustible materials or chemicals. Particular care should be taken where the device is charged in a non commercial environment. Follow battery usage, storage, and charging guidelines found in the user's guide. Improper battery use may result in a fire, explosion, or other hazard. To charge the mobile device battery, the battery and charger temperatures must be between +32 F and +104 F (0 C and +40 C). Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present a risk of fire, explosion, leakage, or other hazard. If you have any questions about the compatibility of a battery or a charger, contact Motorola Enterprise Mobility support. To enable authentication of an approved battery, as required by IEEE1725 clause 10.2.1, all batteries will carry a Motorola hologram. Do not fit any battery without checking it has the Motorola authentication hologram. For devices that utilize a USB port as a charging source, the device shall only be connected to products that bear the USB-IF logo or have completed the USB-IF compliance program. Do not disassemble or open, crush, bend or deform, puncture, or shred. Severe impact from dropping any battery-operated device on a hard surface could cause the battery to overheat. Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals. Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, or expose to fire, explosion, or other hazard. Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle or near a radiator or other heat source. Do not place battery into a microwave oven or dryer. Battery usage by children should be supervised. Please follow local regulations to promptly dispose of used re-chargeable batteries. Do not dispose of batteries in fire. Seek medical advice immediately if a battery has been swallowed. In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with large amounts of water and seek medical advice. If you suspect damage to your equipment or battery, contact Motorola Enterprise Mobility support to arrange for inspection. Radio Frequency Interference Requirements-
FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help. Radio Transmitters (Part 15) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radio Frequency Interference Requirements
- Canada This Class B digital apparatus complies with Canadian ICES-
003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Radio Transmitters For RLAN Devices:
The use of 5 GHz RLAN's, for use in Canada, have the following restrictions:
Restricted Band 5.60 - 5.65 GHz This device complies with RSS 210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes:
(1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Label Marking: The Term IC: before the radio certification only signifies that Industry Canada technical specifications were met. Marking and European Economic Area
(EEA) Frequency of Operation The use of 2.4 GHz RLAN's, for use through the EEA, have the following restrictions:
Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 - 2.4835 GHz. Italy requires a user license for outside usage. France, outside usage is restricted to 2.4 - 2.454 GHz. Bluetooth Wireless Technology for use through the EEA has the following restrictions:
Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 - 2.4835 GHz. Italy requires a user license for outside usage. France, outside usage is restricted to 10 mW EIRP. Statement of Compliance Motorola/Symbol hereby, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A Declaration of Conformity may be obtained from http://www.motorola.com/
doc. Japan (VCCI) - Voluntary Control Council for Interference Class B ITE
Korea Warning Statement for Class B ITE
Other Countries Australia Use of 5 GHz RLAN's in Australia is restricted in the following band 5.50 - 5.65GHz. Brazil Declaraes Regulamentares para Nota: A marca de certificao se aplica ao Transceptor, modelo WT41N0. Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Para maiores informaes sobre ANATEL consulte o site:
www.anatel.gov.br. Chile Este equipo cumple con la Resolucin No 403 de 2008, de la Subsecretaria de telecomunicaciones, relativa a radiaciones electromagnticas. China Quality Certificate in Chinese when the factory has ISO 9001 certification.
Mexico Restrict Frequency Range to: 2.450 - 2.4835 GHz. South Korean
Taiwan
Waste Electrical and Electronic Equipment
(WEEE) If your device does not have the latest entitled software release as of your product purchase date, please e-mail a request to Motorola at:
entitlementservices@motorolasolutions.com. You must include the following essential device information with your request:
Model number Serial number Proof of purchase Title of the software download you are requesting. If it is determined by Motorola that your device is entitled to the latest software release, you will receive an e-mail containing a link directing you to a Motorola Web site to download the appropriate software. Open Source Software Information For instructions on how to obtain a copy of any source code being made Open Source by Motorola Solutions related to software used in this Motorola Solutions Product you may send your request in writing to:
Motorola Solutions, Inc. Open Source Software Management 1301 E. Algonquin Road Schaumburg, IL 60196, U.S.A. In your request, please include the Motorola Solutions Product Name and Version, along with the Open Source Software specifics, such as the Open Source Software Name and Version. Note, the source code for the Open Source Software may be resident on the Motorola Solutions Product Installation Media, or on supplemental Motorola Solutions Product Media. Please reference and review the entire Motorola Solutions Open Source Software Legal Notices and End User License Agreement for the details on location and methods of obtaining the source code. Note, dependent on the license terms of the Open Source Software, source code may not be provided. Please reference and review the entire Motorola Solutions Open Source Software Legal Notices and End User License Agreement for identifying which Open Source Software Packages will have source code provided. To view additional information regarding licenses, acknowledgements and required copyright notices for open source packages used in this Motorola Solutions product, select Start > Control Panel > Legal information.
Bulgarish: Motorola
, :
http://www.motorola.com/recycling/weee.
TURKISH WEEE Statement of Compliance EEE Ynetmeliine Uygundur Software Support Motorola wants to ensure that customers have the latest release of entitled software at the time of product purchase. To confirm that your Motorola Enterprise Mobility device shipped with the latest release of entitled software, visit:
www.motorola.com/support. Check for the latest software from Software Downloads > Product Line/Product > Go. PRELIMINARY
1 2 3 4 5 6 7 | Cover Letter - Agent Authorization | Cover Letter(s) | 71.60 KiB |
Regulatory Engineering July 2, 2015 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Authorizations, Confidentiality, C2PC Request Letter for FCC ID: UZ7WT41N0 with Model: WT41N0 To the commission:
This is to request a Class II permissive change for FCC ID: UZ7WT41N0, the device is being updated to the new UNII/5GHz rules. We, the undersigned, hereby authorize Amanda Wu of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Amanda Wu of BV CPS Taoyuan on our behalf shall have the same effect as acts of our own. If you have any questions, please send them to Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) directly. Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below:
Software Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Should you have any questions or comments regarding this matter, please dont hesitate to contact me. Respectfully, Mark S. Luksich DMTS, Regulatory Engineering 631-738-5134 Mark.Luksich@Zebra.com Zebra Technologies Corporation 1 Z e b r a P l a z a | H o l t s v i l l e , N Y 1 1 7 4 2 | 1 . 6 3 1 . 7 3 8 . 2 4 0 0 p h o n e | 1 . 6 3 1 . 6 2 7 . 7 1 7 9 f a x | www. z e b r a . c o m
1 2 3 4 5 6 7 | Test Setup Photo | Test Setup Photos | 200.98 KiB |
PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 1 Report Format Version 4.2.0 Report No.: 120210E04 RADIATED EMISSION TEST Report No.: 120210E04 2 Report Format Version 4.2.0
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2016-07-14 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | Class II Permissive Change |
2 | 2015-07-13 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | |
3 | 2412 ~ 2472 | DTS - Digital Transmission System | ||
4 | 2015-07-06 | 5745 ~ 5825 | DTS - Digital Transmission System | |
5 | 2012-11-12 | 5500 ~ 5700 | NII - Unlicensed National Information Infrastructure TX | Original Equipment |
6 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
7 | 5745 ~ 5825 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 4 5 6 7 | Effective |
2016-07-14
|
||||
1 2 3 4 5 6 7 |
2015-07-13
|
|||||
1 2 3 4 5 6 7 |
2015-07-06
|
|||||
1 2 3 4 5 6 7 |
2012-11-12
|
|||||
1 2 3 4 5 6 7 | Applicant's complete, legal business name |
Zebra Technologies Corporation
|
||||
1 2 3 4 5 6 7 | FCC Registration Number (FRN) |
0015642663
|
||||
1 2 3 4 5 6 7 | Physical Address |
1 Zebra Plaza
|
||||
1 2 3 4 5 6 7 |
Holtsville, NY
|
|||||
1 2 3 4 5 6 7 |
Holtsville
|
|||||
1 2 3 4 5 6 7 |
United States
|
|||||
app s | TCB Information | |||||
1 2 3 4 5 6 7 | TCB Application Email Address |
t******@timcoengr.com
|
||||
1 2 3 4 5 6 7 |
c******@curtis-straus.com
|
|||||
1 2 3 4 5 6 7 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 3 4 5 6 7 | Grantee Code |
UZ7
|
||||
1 2 3 4 5 6 7 | Equipment Product Code |
WT41N0
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 4 5 6 7 | Name |
L**** Z********
|
||||
1 2 3 4 5 6 7 | Title |
Regulatory Specialist
|
||||
1 2 3 4 5 6 7 | Telephone Number |
346-2********
|
||||
1 2 3 4 5 6 7 | Fax Number |
631-6********
|
||||
1 2 3 4 5 6 7 |
L******@zebra.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 4 5 6 7 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 4 5 6 7 | No | |||||
1 2 3 4 5 6 7 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 2 3 4 5 6 7 | Yes | |||||
1 2 3 4 5 6 7 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 12/27/2012 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 4 5 6 7 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 4 5 6 7 | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
1 2 3 4 5 6 7 | DTS - Digital Transmission System | |||||
1 2 3 4 5 6 7 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 3 4 5 6 7 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wearable Terminal | ||||
1 2 3 4 5 6 7 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 4 5 6 7 | Yes | |||||
1 2 3 4 5 6 7 | Modular Equipment Type | Does not apply | ||||
1 2 3 4 5 6 7 | Purpose / Application is for | Class II Permissive Change | ||||
1 2 3 4 5 6 7 | Original Equipment | |||||
1 2 3 4 5 6 7 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 4 5 6 7 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 4 5 6 7 | Grant Comments | Output power is conducted. SAR compliance for body-worn operation is limited to the specific belt-clips / holsters / accessories tested for this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR value for body-worn condition is 0.26 W/kg. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. Note: SAR configurations have been pre-approved under KDB 937853. | ||||
1 2 3 4 5 6 7 | Class II Permissive Change for updating U-NII-1 & 3 to new rule. Output power is conducted. SAR compliance for body-worn operation is limited to the specific belt-clips / holsters / accessories tested for this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR value for body-worn condition is 0.26 W/kg. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. Note: SAR configurations have been pre-approved under KDB 937853. | |||||
1 2 3 4 5 6 7 | Class II Permissive Change for updating DTS 5.8G to U-NII-3 band under new rule. Output power is conducted. SAR compliance for body-worn operation is limited to the specific belt-clips / holsters / accessories tested for this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR value for body-worn condition is 0.26 W/kg. Note: SAR configurations have been pre-approved under KDB 937853. | |||||
1 2 3 4 5 6 7 | Class II Permissive Change as described in this filing. Output power is conducted. SAR compliance for body-worn operation is limited to the specific belt-clips / holsters / accessories tested for this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR value for body-worn condition is 0.26 W/kg. Note: SAR configurations have been pre-approved under KDB 937853. | |||||
1 2 3 4 5 6 7 | Output power listed is conducted. End users must be informed of the body worn requirements for satisfying RF exposure compliance. | |||||
1 2 3 4 5 6 7 | Output power is conducted. SAR compliance for body-worn operation is limited to the specific belt-clips / holsters / accessories tested for this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR value for body-worn condition is 0.26 W/kg. Note: SAR configurations have been pre-approved under KDB 937853. | |||||
1 2 3 4 5 6 7 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 4 5 6 7 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 4 5 6 7 | Firm Name |
Sporton International Inc
|
||||
1 2 3 4 5 6 7 |
Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
|
|||||
1 2 3 4 5 6 7 | Name |
J******** T********
|
||||
1 2 3 4 5 6 7 |
R****** C********
|
|||||
1 2 3 4 5 6 7 | Telephone Number |
88633******** Extension:
|
||||
1 2 3 4 5 6 7 |
+886-******** Extension:
|
|||||
1 2 3 4 5 6 7 | Fax Number |
88633********
|
||||
1 2 3 4 5 6 7 |
+886-********
|
|||||
1 2 3 4 5 6 7 |
j******@sporton.com.tw
|
|||||
1 2 3 4 5 6 7 |
r******@tw.bureauveritas.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | 49 CC | 5180 | 5240 | 0.073 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15E | 49 CC | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
1 | 3 | 15E | 49 CC | 5500 | 5700 | 0.093 | |||||||||||||||||||||||||||||||||||
1 | 4 | 15E | 49 CC | 5745 | 5825 | 0.201 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15E | 38 CC | 5180 | 5240 | 0.073 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15E | 38 CC ND | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
2 | 3 | 15E | 38 CC ND | 5500 | 5700 | 0.093 | |||||||||||||||||||||||||||||||||||
2 | 4 | 15E | 38 CC | 5745 | 5825 | 0.066 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC | 2402 | 2480 | 0.001 | |||||||||||||||||||||||||||||||||||
3 | 2 | 15C | CC | 2412 | 2472 | 0.224 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15C | CC | 2412 | 2472 | 0.224 | |||||||||||||||||||||||||||||||||||
4 | 2 | 15C | CC | 5745 | 5825 | 0.204 | |||||||||||||||||||||||||||||||||||
4 | 3 | 15C | CC | 2402 | 2480 | 0.001 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
5 | 1 | 15E | CC | 5180 | 5240 | 0.028 | |||||||||||||||||||||||||||||||||||
5 | 2 | 15E | CC ND | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
5 | 3 | 15E | CC ND | 5500 | 5700 | 0.093 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
6 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0080000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
7 | 1 | 15C | CC | 2412 | 2472 | 0.224 | |||||||||||||||||||||||||||||||||||
7 | 2 | 15C | CC | 5745 | 5825 | 0.204 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC