Symbol CS3070 Quick Reference Guide 2 Symbol CS3070 2010 by Motorola, Inc. All rights reserved. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from Motorola. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice. The software is provided strictly on an as is basis. All software, including firmware, furnished to the user is on a licensed basis. Motorola grants to the user a non-transferable and non-exclusive license to use each software or firmware program delivered hereunder (licensed program). Except as noted below, such license may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of Motorola. No right to copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with other program material, create a derivative work from a licensed program, or use a licensed program in a network without written permission from Motorola. The user agrees to maintain Motorolas copyright notice on the licensed programs delivered hereunder, and to include the same on any authorized copies it makes, in whole or in part. The user agrees not to decompile, disassemble, decode, or reverse engineer any licensed program delivered to the user or any portion thereof. Motorola reserves the right to make changes to any software or product to improve reliability, function, or design. Motorola does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any Motorola, Inc., intellectual property rights. An implied license only exists for equipment, circuits, and subsystems contained in Motorola products. MOTOROLA and the Stylized M Logo and Symbol and the Symbol logo are registered in the US Patent & Trademark Office. Bluetooth is a registered trademark of Bluetooth SIG. Microsoft, Windows and ActiveSync are either registered trademarks or trademarks of Microsoft Corporation. All other product or service names are the property of their respective owners. Motorola, Inc. One Motorola Plaza Holtsville, New York 11742-1300 http://www.motorola.com/enterprisemobility Warranty For the complete Motorola hardware product warranty statement, go to: http://www.motorola.com/enterprisemobility/warranty. Quick Reference Guide 3 Introduction This document provides basic instructions for setting up, programming, and using the CS3000 series scanners. The scanner is available in the following configurations:
CS3000 - USB (batch), 0.5 GB Flash CS3070 - USB (batch) and Bluetooth, 0.5 GB Flash Each scanner includes a USB host cable. A charging cradle is also available for mounting, charging, and host connection. Charging To charge the CS3000 series scanner, connect it to a host PC via the USB host cable or charging cradle. No power supply is necessary. Charge time is approximately three hours for a fully discharged battery. Charging via USB Host Cable 1. Remove the protective cover from the scanner. Insert the mini-USB connector on the host cable in the interface port on the scanner. 2. 4 Symbol CS3070 3. Connect the other end of the host cable to a USB port on the host PC. Illustration to come Charging via Charging Cradle 1. Insert the cradles USB connector into a USB port on the host PC. 2. Remove the protective cover from the scanner. 3. Place the scanner in the cradle, ensuring the mini-USB connector in the cradle inserts into the interface port on the scanner. Illustration to come Quick Reference Guide 5 Connecting to a Host Batch Connection See Charging on page 3 for instructions on connecting the scanner to a host PC via USB. Note To enter batch scanning mode, the scanner cannot be paired to a Bluetooth host (applies to CS3070 model only). Bluetooth Connection Pairing For RF-enabled scanners, to pair to a Bluetooth-enabled host:
Note If the host does not support Bluetooth communication, a third-party Bluetooth adapter is required. 1. Press the scan button (+) to wake the scanner. 2. Press and hold the Bluetooth button (round button with Motorola logo) for five seconds. The scanner beeps and the Bluetooth button starts blinking quickly to indicate that the scanner is discoverable by the host. 3. On the host PC, launch the third party Bluetooth pairing application and place the application into discover Bluetooth device mode. 6 Symbol CS3070 4. Select the CS3070 from the discovered device list. The Bluetooth application may prompt you to scan a passkey it generated, or for you to create and then scan a pin. 5. Scan Numeric Bar Codes on page 8 corresponding to the passkey, then scan Enter on page 9. The Bluetooth button blinks slowly to indicate that the scanner paired with the host. Note Bluetooth pairing suspends temporarily while charging via a USB cable. Disconnecting the cable re-establishes the Bluetooth pairing. Unpairing To unpair the scanner and host, press the Bluetooth button. The Bluetooth button stops blinking. Note To enter batch scanning mode, the scanner cannot be paired to a Bluetooth host (applies to CS3070 model only). Quick Reference Guide 7 Bluetooth Communication Options To set up the scanner for communication with a host using standard Bluetooth profiles, scan one of the following bar codes. Serial Port Profile (Slave) - The scanner connects to the host via Bluetooth and emulates a serial connection. The scanner accepts an incoming connection requested from a remote device and is the slave. Scan Serial Port Profile (Slave) and wait for the incoming connection. Bluetooth Keyboard Emulation (HID Slave) - The scanner connects to the host via Bluetooth and emulates a keyboard. The scanner accepts an incoming connection requested from a remote device and is the slave. Scan Bluetooth Keyboard Emulation (HID Slave) and wait for the incoming connection. Serial Port Profile (Slave) Bluetooth Keyboard Emulation (HID Slave) 8 Symbol CS3070 Numeric Bar Codes 0 1 2 3 4 5 Quick Reference Guide 9 6 7 8 9 Enter 10 Symbol CS3070 Scanning To scan bar codes:
1. Aim the scanner at the bar code. 2. Press the scan (+) button. Illustration to come 3. Ensure the scan line crosses every bar and space of the symbol. RIGHT 012345 WRONG 012345 The scanner beeps and the LED turns green to indicate a successful decode. See User Indications for beeper and LED definitions. Quick Reference Guide 11 Deleting Bar Codes In batch mode, to delete a bar code aim the scanner at the bar code and press the function
( - ) button. Note Bar codes cannot be deleted in Bluetooth mode. User Indications Function User Action Scan item bar code Press scan
(+) key Beeper toggle Delete item bar code
(when enabled) Delete -
item doesn't exist Clear All
(when enabled) Hold scan
(+) key 5 seconds past scan time Hold function (-) key Hold function (-) key 3 seconds past scan time LED Beeper Flashing green ->
solid green Flashing green - >
flashing amber for 5 seconds - >
solid amber Flashing amber ->
solid amber Flashing amber ->
solid red Flashing amber ->
solid amber Short high tone 2 short high tones -
beeper on No tone -
beeper off Short medium tone Long short short 2 long medium tones 12 Symbol CS3070 LED Beeper None None Flashing amber -
charging;
solid green -
charged None ->
solid amber None Short long short None Rapidly flashing blue LED Slowly flashing blue LED Slowly flashing blue LED Blue LED is off TBD None TBD TBD Function Clear All
(with Delete and Clear All disabled) USB connection to host User Action Hold function (-) key Connect scanner to host Hold both scan (+) and function
(-) keys for 6 seconds Press Bluetooth button Press Bluetooth button Data protection toggle
(when enabled) Bluetooth radio enable
(ready to pair with a host) Bluetooth radio pairing Bluetooth radio paired with host Bluetooth radio out of range of host Bluetooth radio returns to communica-
tion range of host Press any key Slowly flashing blue LED Quick Reference Guide 13 Transmitting Bar Code Data to Host Transferring Data from a Batch Scanner The BarcodeFile.txt file within the \Scanned Barcodes directory on the scanner stores scanned bar code data. Connect the scanner to the host PC via USB host cable or the charging cradle and use Windows Explorer to navigate to the scanner. Copy the bar code data file to the host. Note The scanner also supports an autorun feature where the customer can build an autorun.inf file to automatically copy the data to the host upon connection. To clear the bar code data, delete the BarcodeFile.txt file from the scanner, or scan the Clear Data bar code. Transferring Data from an RF Scanner When the scanner is paired to a host via Bluetooth, data transmits to the host after each scan and is not stored on the device. 14 Symbol CS3070 Regulatory Information This device is approved under the Symbol Technologies brand:
Symbol Technologies, Inc., is the Enterprise Mobility business of Motorola, Inc. ("Motorola"). This guide applies to the following Model Numbers: CS3070, CS3000. Wireless information applies to CS3070 only. All Motorola/Symbol devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Local language translations are available at the following website:
http://www.motorola.com/enterprisemobility/manuals Any changes or modifications to Motorola/Symbol Technologies equipment, not expressly approved by Motorola/Symbol Technologies, could void the user's authority to operate the equipment. Bluetooth Wireless Technology This is an approved Bluetooth product. For more information or to view End Product Listing, please visit https://www.bluetooth.org/tpg/listings.cfm Wireless Device Country Approvals Regulatory markings, subject to certification, are applied to the device signifying the radio(s) is/are approved for use in the following countries: United States, Canada, and Europe1. Please refer to the Symbol Declaration of Conformity (DoC) for details of other country markings. This is available at http://www2.symbol.com/doc/. Note1: For 2.4GHz or 5GHz Products: Europe includes, Austria, Belgium, Bulgaria, Czech Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Operation of the device without regulatory approval is illegal. Quick Reference Guide 15 Health and Safety Recommendations Ergonomic Recommendations Improve work procedures. Caution: In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your local Health & Safety Manager to ensure that you are adhering to your company's safety programs to prevent employee injury. Reduce or eliminate repetitive motion Maintain a natural position Reduce or eliminate excessive force Keep objects that are used frequently within easy reach Perform tasks at correct heights Reduce or eliminate vibration Reduce or eliminate direct pressure Provide adjustable workstations Provide adequate clearance Provide a suitable working environment Note: The following section is only applicable for mobile computers. Vehicle Installation RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (including safety systems). Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. An air bag inflates with great force. DO NOT place objects, including either installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result. Position your device within easy reach. Be able to access your device without removing your eyes from the road. Note: Connection to an alert device that will cause a vehicle horn to sound or lights to flash, on receipt of a call on public roads, is not permitted. Safety on the Road Do not take notes or use the device while driving. Jotting down a
"to do" list or flipping through your address book takes attention away from your primary responsibility, driving safely. 16 Symbol CS3070 When driving a car, driving is your first responsibility - Give full attention to driving. Check the laws and regulations on the use of wireless devices in the areas where you drive. Always obey them.
"The wireless industry reminds you to use your device / phone safely when driving". Warnings for Use of Wireless Devices Please observe all warning notices with regard to the usage of wireless devices. Potentially Hazardous Atmospheres - Vehicles Use You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants etc. and areas where the air contains chemicals or particles (such as grain, dust, or metal powders) and any other area where you would normally be advised to turn off your vehicle engine. Safety in Aircraft Switch off your wireless device whenever you are instructed to do so by airport or airline staff. If your device offers a 'flight mode' or similar feature, consult airline staff as to its use in flight. Wireless devices transmit radio frequency energy and may affect medical electrical equipment. Safety in Hospitals Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics or healthcare facilities. These requests are designed to prevent possible interference with sensitive medical equipment. Pacemakers Pacemaker manufacturers recommended that a minimum of 15cm (6 inches) be maintained between a handheld wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with independent research and recommendations by Wireless Technology Research. Persons with Pacemakers:
Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker when turned ON. Should not carry the device in a breast pocket. Should use the ear furthest from the pacemaker to minimise the potential for interference. If you have any reason to suspect that interference is taking place, turn OFF your device. Quick Reference Guide 17 Other Medical Devices Please consult your physician or the manufacturer of the medical device, to determine if the operation of your wireless product may interfere with the medical device. RF Exposure Guidelines Safety Information Reducing RF Exposure - Use Properly Only operate the device in accordance with the instructions supplied. International The device complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices. For information on "International" human exposure to electromagnetic fields refer to the Motorola/Symbol Declaration of Conformity (DoC) at http://www2.symbol.com/doc/. EU Handheld Devices To comply with EU RF exposure requirements, this device must be operated in the hand with a minimum separation distance of 20cm or more from a person's body. Other operating configurations should be avoided. US and Canada Co-located statement To comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must not be co-located or operating in conjunction with any other transmitter/antenna except those already approved in this filling. Handheld Devices To comply with FCC RF exposure requirements, this device must be operated in the hand with a minimum separation distance of 20 cm or more from a person's body. Other operating configurations should be avoided. 18 Laser Devices Symbol CS3070 Complies with 21CFR1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. EN60825-1: 2007 IEC60825-1 (Ed. 2.0) The laser classification is marked on one of the labels on the device. Class 1 Laser devices are not considered to be hazardous when used for their intended purpose. The following statement is required to comply with US and international regulations:
Caution: Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous laser light exposure. Laser Warning Label - Class 1 CLASS 1 LASER PRODUCT LASER KLASSE 1 APPAREIL LASER DE CLASSE 1 Scanner Labeling Illustration to come Power Supply Use only a Motorola/Symbol approved power supply output rated at 5 Vdc and minimum 0.85 A. The power supply shall be Listed to UL/CSA 60950-1; and certified to IEC60950-1 and EN60950-1 with SELV outputs. Use of alternative power supply will invalidate any approval given to this device and may be dangerous. Quick Reference Guide 19 Batteries Battery Information Motorola/Symbol rechargeable battery packs are designed and constructed to the highest standards within the industry. However, there are limitations to how long a battery can operate or be stored before needing replacement. Many factors affect the actual life cycle of a battery pack, such as heat, cold, harsh environmental conditions and severe drops. When batteries are stored over six (6) months, some irreversible deterioration in overall battery quality may occur. Store batteries at half of full charge in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of metallic parts and electrolyte leakage. When storing batteries for one year or longer, the charge level should be verified at least once a year and charged to half of full charge. Replace the battery when a significant loss of run time is detected. Standard warranty period for all Symbol batteries is 30 days, regardless if the battery was purchased separately or included as part of the mobile computer or bar code scanner. For more information on Symbol batteries, please visit:
http:/mysymbolcare.symbol.com/battery/batbasics1.html Battery Safety Guidelines The area in which the units are charged should be clear of debris and combustible materials or chemicals. Particular care should be taken where the device is charged in a non commercial environment. Follow battery usage, storage, and charging guidelines found in the user's guide. Improper battery use may result in a fire, explosion, or other hazard. To charge the mobile device battery, the battery and charger temperatures must be between +32 F and +113 F (0 C and
+45 C) Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present a risk of fire, explosion, leakage, or other hazard. If you have any questions about the compatibility of a battery or a charger, contact Motorola Enterprise Mobility support. For devices that utilize a USB port as a charging source, the device shall only be connected to products that bear the USB-IF logo or have completed the USB-IF compliance program. Do not disassemble or open, crush, bend or deform, puncture, or shred. 20 Symbol CS3070 Severe impact from dropping any battery-operated device on a hard surface could cause the battery to overheat. Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals. Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, or expose to fire, explosion, or other hazard. Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle or near a radiator or other heat source. Do not place battery into a microwave oven or dryer. Battery usage by children should be supervised. Please follow local regulations to promptly dispose of used re-chargeable batteries. Do not dispose of batteries in fire. Seek medical advice immediately if a battery has been swallowed. In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with large amounts of water and seek medical advice. If you suspect damage to your equipment or battery, contact Motorola Enterprise Mobility support to arrange for inspection. Radio Frequency Interference Requirements- FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Quick Reference Guide 21 Consult the dealer or an experienced radio/TV technician for help. Radio Transmitters (Part 15) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radio Frequency Interference Requirements-
Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Radio Transmitters This device complies with RSS 210 of Industry & Science Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Label Marking: The Term "IC:" before the radio certification only signifies that Industry Canada technical specifications were met. Marking and European Economic Area (EEA) Bluetooth Wireless Technology for use through the EEA has the following restrictions:
Maximum radiated transmit power of 100mW EIRP in the frequency range 2.400 -2.4835 GHz France, outside usage is restricted to 10mW EIRP Italy requires a user license for outside usage. Statement of Compliance for CS3070 Wireless Devices Motorola/Symbol hereby, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A Declaration of Conformity may be obtained from http://www2.symbol.com/doc/. Statement of Compliance for CS3000 Motorola/Symbol hereby declares that this device is in compliance with all the applicable Directives, 2004/108/EC and 2006/95/EC. A Declaration of Conformity may be obtained from http://www2.symbol.com/doc/. 22 Symbol CS3070 Waste Electrical and Electronic Equipment (WEEE) English: For EU Customers: All products at the end of their life must be returned to Motorola for recycling. For information on how to return product, please go to:
http://www.motorola.com/recycling/weee. Bulgarish: :
Motorola
.
, :
http://www.motorola.com/recycling/weee. etina: Pro zkaznky z EU: Vechny produkty je nutn po skonen jejich ivotnosti vrtit spolenosti Motorola k recyklaci. Informace o zpsobu vrcen produktu najdete na webov strnce: http://www.motorola.com/recycling/weee. Dansk: Til kunder i EU: Alle produkter skal returneres til Motorola til recirkulering, nr de er udtjent. Ls oplysningerne om returnering af produkter p:
http://www.motorola.com/recycling/weee. Deutsch: Fr Kunden innerhalb der EU: Alle Produkte mssen am Ende ihrer Lebensdauer zum Recycling an Motorola zurckgesandt werden. Informationen zur Rcksendung von Produkten finden Sie unter http://www.motorola.com/recycling/weee.
: ..: ,
, Motorola
.
, http://www.motorola.com/recycling/weee . Eesti: EL klientidele: kik tooted tuleb nende eluea lppedes tagastada taaskasutamise eesmrgil Motorola'ile. Lisainformatsiooni saamiseks toote tagastamise kohta klastage palun aadressi: http://www.motorola.com/recycling/weee. Espaol: Para clientes en la Unin Europea: todos los productos debern entregarse a Motorola al final de su ciclo de vida para que sean reciclados. Si desea ms informacin sobre cmo devolver un producto, visite: http://www.motorola.com/recycling/weee. Franais: Clients de l'Union Europenne : Tous les produits en fin de cycle de vie doivent tre retourns Motorola pour recyclage. Pour de plus amples informations sur le retour de produits, consultez : http://www.motorola.com/recycle/weee. Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono essere restituiti a Motorola al fine di consentirne il riciclaggio. Per informazioni sulle modalit di restituzione, visitare il seguente sito Web:
http://www.motorola.com/recycling/weee. Latvieu: ES klientiem: visi produkti pc to kalpoanas ma beigm ir jnogd atpaka Motorola otrreizjai prstrdei. Lai iegtu informciju par produktu nogdanu Motorola, ldzu, skatiet: http://www.motorola.com/recycling/weee. Quick Reference Guide 23 Lietuvi: ES vartotojams: visi gaminiai, pasibaigus j eksploatacijos laikui, turi bti grinti utilizuoti kompanij Motorola. Daugiau informacijos, kaip grinti gamin, rasite:
http://www.motorola.com/recycling/weee. Magyar: Az EU-ban vsrlknak: Minden tnkrement termket a Motorola vllalathoz kell eljuttatni jrahasznosts cljbl. A termk visszajuttatsnak mdjval kapcsolatos tudnivalkrt ltogasson el a http://www.motorola.com/recycling/weee weboldalra. Malti: Gal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aar tal-ajja ta' l-uu taghom, iridu jiu rritornati gand Motorola gar-riikla. Gal aktar tagrif dwar kif gandek tirritorna l-prodott, jekk jogbok ur:
http://www.motorola.com/recycling/weee. Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar Motorola te worden teruggezonden voor recycling. Raadpleeg http://www.motorola.com/recycling/weee voor meer informatie over het terugzenden van producten. Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji naley zwrci do firmy Motorola w celu ich utylizacji. Informacje na temat zwrotu produktw znajduj si na stronie internetowej http://www.motorola.com/recycling/weee. Portugus: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos Motorola para reciclagem. Para obter informaes sobre como devolver o produto, visite:
http://www.motorola.com/recycling/weee. Romnesc: Pentru clienii din UE: Toate produsele, la sfritul duratei lor de funcionare, trebuie returnate la Motorola pentru reciclare. Pentru informaii despre returnarea produsului, accesai:
http://www.motorola.com/recycling/weee. Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku ivljenjske dobe vrniti podjetju Motorola za reciklao. Za informacije o vrailu izdelka obiite:
http://www.motorola.com/recycling/weee. Slovenina: Pre zkaznkov z krajn EU: Vetky vrobky musia by po uplynut doby ich ivotnosti vrten spolonosti Motorola na recyklciu. Bliie informcie o vrten vrobkov njdete na:
http://www.motorola.com/recycling/weee. Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrtettvksi Motorola-yhtin, kun tuotetta ei en kytet. Listietoja tuotteen palauttamisesta on osoitteessa http://www.motorola.com/recycling/weee. Svenska: Fr kunder inom EU: Alla produkter som uppntt sin livslngd mste returneras till Motorola fr tervinning. Information om hur du returnerar produkten finns p http://www.motorola.com/recycling/weee. Service Information If you have a problem using the equipment, contact your facilitys Technical or Systems Support. If there is a problem with the equipment, they will contact the Motorola Enterprise Mobility Support at:
http://www.motorola.com/enterprisemobility/
contactsupport For the latest version of this guide go to:
http://www.motorola.com/enterprisemobility/
manuals Motorola, Inc. One Motorola Plaza Holtsville, New York 11742, USA 1-800-927-9626 http://www.motorola.com/enterprisemobility MOTOROLA and the Stylized M Logo and Symbol and the Symbol logo are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their respective owners. Motorola, Inc. 2010 72-136598-01 DRAFT - April 2010