FCC ID: UZ7RPM001 XSLATE R12 SlateMat

XSLATE R12 Rugged Tablet Platform IMAGE AREA 7.5 h x 7.4w Apply Overlay 1 after adding picture Accessory Guide One Tablet Platform. Many Accessories. Countless Applications. 2018 ZIH Corp. and/or its affiliates. All rights reserved. ACCESSORY GUIDE INSTRUCTIONS The R12 rugged tablet platform has a full line of purpose-built accessories to support a wide variety of applications and workflows. Use this guide to identify which accessories apply to your needs and assemble a lineup that will work perfectly for your unique workflow requirements. ZEBRA TECHNOLOGIES IMAGE AREA 7.5 h x 7.4w TABLET OF CONTENTS Docking Solutions ------------------------------------ 04 Power ---------------------------------------------------- 11 Input Devices ------------------------------------------ 15 Carrying Cases --------------------------------------- 23 Other ---------------------------------------------------- 26 ZEBRA TECHNOLOGIES XSLATE R12 Rugged Tablet Accessories Docking Solutions ZEBRA TECHNOLOGIES 4 R12 Docking Solutions Secure Mobile Dock The XSLATE R12-Series Secure Mobile Dock is designed to be a low profile and rugged docking solution for in-vehicle and forklift mounting of the XSLATE R12 Tablet. It offers full port replication

(HDMI, VGA, 4 USBs, Ethernet and Serial), full high definition output for up to two external monitors, an optional Pass-Through antenna module and is convenient to mount using a standard VESA hole pattern. A secure latch offers simple, one-handed docking and undocking of Xplore Tablet PCs and the integrated key lock provides increased security. The XSLATE R12-Series Secure Mobile Dock is designed to work with a family of other R12 accessories. The XSLATE R12 tablet can be docked with the XSLATE Companion Keyboard and the XSLATE R12 SlateMate attached. Part Numbers:

300104 300094 (with Battery Charger) 300105 (with Antenna Pass Through) 300095 (with Antenna Pass Through and Battery Charger) ZEBRA TECHNOLOGIES 5 R12 Docking Solutions Secure Mobile Dock Specifications:

USB 3.0 (2), USB 2.0 (2), Ethernet RJ-45 port (10/100/1000 Mbps), HDMI port, VGA port, Serial port, Audio In/Out, DC-In port (Note: GNSS not available when external monitor in use) Optional battery charger Integrated battery charging bay Low profile and light weight Dockable with Slatemate attached Dockable with XSLATE Companion Keyboard 75mm x 75mm VESA hole-pattern for alternative mounting options Optional Pass-Through Antenna Module: Greatly increased signal performance of wireless communications. Connections provided for LTE, WiFi

(optional), and GPS signals. This module provides connection to the tablet and SMA connectors for external antennas (purchased separately). Compatible with Xplores Standard power supplies including:

1-Year Warranty POWER:

- 110-220v AC power supply

- 12, 24, 48 V DC vehicle adapter

- AC/DC adapter Note: Sold Separately DETACHABLE CABLES:

Power cord US, AU, UK or Euro DIMENSIONS (L X W X H) AND WEIGHT:

Weight: 3.75 lbs (1.7 kg) Part Numbers:

300104 300094 (with Battery Charger) 300105 (with Antenna Pass Through) 300095 (with Antenna Pass Through and Battery Charger) ZEBRA TECHNOLOGIES Weight with 2nd Battery Charging Bay: 4.17 lbs (1.89 kg) 6 R12 Docking Solutions Industrial Dock Part Numbers:

300099 (US Power) 300101 (ANZ Power) 300100 (UK Power) 300102 (EU Power) ZEBRA TECHNOLOGIES The XSLATE R12-Series Industrial Dock is designed to be a low profile and rugged docking solution for desktop workflows. Combining the durability of the Secure Mobile Dock with an ergonomic desktop stand the Industrial Dock is well suited for rugged desktop environments. It offers full port replication (HDMI, VGA, 4 USBs, Ethernet and Serial), full high definition output for up to two external monitors and an integrated spare battery charger. A secure latch offers simple, one-handed docking and undocking of Xplore Tablet PCs and the integrated key lock provides increased security. Key Features:

Expand the R12-Series tablet in to a full-featured desktop computing and charging solution Ruggedized design for demanding environments Dockable with XSLATE Companion Keyboard attached Dockable with SlateMate attached Key Lock for added device security Charge a spare battery to ensure a full day of computing while away from the office Full High Definition output for two external monitors Pre-drilled holes in the stand for secure mounting 7 R12 Docking Solutions Industrial Dock Part Numbers:

300099 (US Power) 300101 (ANZ Power) 300100 (UK Power) 300102 (EU Power) ZEBRA TECHNOLOGIES Specifications:

Battery Charging Bay Module USB 3.0 (2), USB 2.0 (2), Ethernet RJ-45 port (10/100/1000 Mbps), HDMI port, VGA port, Serial port, Audio In/Out, DC-In port Adjustable angle for comfortable viewing 1-Year Warranty POWER:

Input: 110 220v; 1.5A; 50 60 Hz Output: 19V; 2.64A DETACHABLE CABLES:

Power cord US, UK, AU or Euro DIMENSIONS (L X W X H) AND WEIGHT:

11.25 in x 7.25 in x 9.75 in (285.75mm x 184.15mm x 247.65 mm) Weight: 9.41 lbs (4.27 kg) 8 R12 Docking Solutions R12 Docking Station Part Numbers:

300064 (US Power) 300092 (ANZ Power) 300097 (UK Power) 300093 (EU Power) ZEBRA TECHNOLOGIES The XSLATE R12-Series Docking Station expands the utility of the R12 platform by enabling a full-featured desktop computing experience. Thoughtfully designed to integrate in to your workflow, this grab and go dock works with the Work Anywhere Kit carry case attached, has a full suite of I/O capabilities and an integrated charger for a spare battery. The adjustable viewing angle and VESA mounting pattern provide options for mounting on wall or desktop to ensure a comfortable viewing experience in your environment. Key Features:

Expand the R12-Series tablet in to a full-featured desktop computing and charging solution Dock with the Work Anywhere Kit carry case attached Charge a spare battery to ensure a full day of computing while away from the office Full High Definition output for two external monitors VESA pattern mounting holes for alternative mounting locations 9 R12 Docking Solutions R12 Docking Station Specifications:

Integrated battery charging bay USB 3.0 (2), USB 2.0 (2), Ethernet RJ-45 port (10/100/1000 Mbps), HDMI port, VGA port, Serial port, Audio In/Out, DC-In port

(Note: GNSS not available when external monitor in use) Adjustable angle for comfortable viewing 100mm VESA hole-pattern for alternative mounting options 1-Year Warranty POWER:

Input: 110 220v; 1.5A; 50 60 Hz Output: 19V; 2.64A DETACHABLE CABLES:

Power cord US, UK, AU or Euro Fully-adjustable viewing angle Compatible with R12 SlateMate module Part Numbers:

300064 (US Power) 300092 (ANZ Power) 300097 (UK Power) 300093 (EU Power) ZEBRA TECHNOLOGIES DIMENSIONS (L X W X H) AND WEIGHT:

11.25 in x 7.25 in x 9.75 in (285.75mm x 184.15mm x 247.65 mm) Weight: 5.3 lbs (2.4 kg) 10 XSLATE R12 Rugged Tablet Accessories Power ZEBRA TECHNOLOGIES 11 R12 Power R12 Additional Battery Never be caught without power when you need it most. An additional battery is the perfect companion when working in the field. The battery can be charged while in the tablet, or in the battery charging slot provided in the R12-Series Docking Station. The handy power meter included on the battery takes the guess work out of determining available battery life. R12 tablets hot swappable battery capability allows you to continue with your mission critical application without shutting down the system to change the battery. Key Features:

Lithium-ion Battery with 45WHr capacity External LED indicates approximate remaining battery life Hot swappable 1-year warranty Part Number:

450035 ZEBRA TECHNOLOGIES 12 R12 Power Desktop Battery Charger Kit Part Numbers:

450099 (US Power) 450101 (ANZ Power) 450100 (UK Power) 450102 (EU Power) ZEBRA TECHNOLOGIES The R12-Series Desktop Battery Charger Kit provides stand-alone battery charging capability for your work environment. This kit includes the battery charger, charger cradle and AC adapter. The charger features a charge status LED indicator and a latch to secure the battery. This charger is capable of being daisy-chained with an additional charger to provide a charging station for two batteries from a single power supply. Key Features:

LED Indicator light for charging status Can be integrated into the Secure Mobile Vehicle Dock or used as a stand-alone charger. Can be daisy-chained with an additional charger Standard Battery charge time: 2.5 Hrs (tablet on or off) Includes power adapter 1-year warranty 13 R12 Power Power Adapter Avoid forgetting your AC Power Adapter and power cord when traveling or working from home! A second AC Power Pack provides the convenience of working from multiple locations without the fuss of packing up the power sources for your rugged tablet PC. The AC Power Pack is great for travel. Part Numbers:

450110 (US Power) 450136 (ANZ Power) 450135 (UK Power) 450137 (EU Power) ZEBRA TECHNOLOGIES 14 XSLATE R12 Rugged Tablet Accessories Input Devices ZEBRA TECHNOLOGIES 15 R12 Input Devices R12 Companion Keyboard Keyboard closed and magnetically attached to back of R12 Part Numbers:

420078 (R12 Companion Keyboard US) 420079 (R12 Companion Keyboard UK) 420080 (R12 Companion Keyboard DE) 420076 (R12 Companion Keyboard FR) 420083 (R12 Companion Keyboard ES) 420077 (R12 Companion Keyboard CH) 410040 (Kickstand only) The innovative design of the XSLATE R12-Series Companion Keyboard features an ultra-thin wireless keyboard and a foldable kickstand. When not in use the kickstand folds away and the keyboard magnetically attaches to the rear of the tablet providing a low profile way to transport and charge the device. The companion keyboard features a capacitive touchpad that not only works as a mouse, but also recognizes Windows gestures for efficient navigation. The thoughtful design of the Companion keyboard provides users with a comfortable and efficient typing experience when needed. Key Features:

Magnetically attaches to the rear of the tablet Kickstand converts into an easel for a comfortable viewing angle Charges keyboard when attached to the rear of the tablet DIMENSIONS (L X W X H) AND WEIGHT:

11.375 in x 6.625 in x 0.46 in (288.9 mm x 168.3 mm 11.8 mm) Weight: 1 lb. (0.46 kg) ZEBRA TECHNOLOGIES 16 R12 Input Devices XSLATE R12 SlateMate:

Barcode / RFID / Serial Port The XSLATE R12 SlateMate is a 3-in-1 factory installed personality module consisting of a Barcode Scanner (BCS), High Frequency RFID reader (HF RFID) and a Serial Port. This add-on module expands the productive power of the R12 while maintaining the same level of ruggedness and portability. The lightweight data acquisition module eliminates the need for multiple data collection devices and increases the accuracy of field data collection. The XSLATE R12 SlateMate integrates with the R12 accessory family. It is designed to work with the R12-Series Work Anywhere Kit carrying case, the docking station and the Mobile Secure Dock, when attached. The R12 SlateMate comes with a 3-in-1 module (BCS, HF RFID Reader and Serial Port). The SlateMate Module can only be installed at factory and cannot be purchased after point of sale. Part Numbers:

200445, 200450, 200453, 200457, 200461, 200468, 200377, 200357, 200367, 200369, 200379, 200402, 200693, 200572, 200582, 200513, 200163, 200531, 200543, 200195, 200183, 200172, 200178, 200180, 200182, 200169, 200185, 200186, 200194, 200843, 200901, 200889, 200771, 200828, 200830, 200839, 201058, 201059, 201104, 201109, 201132, 201143, 200920, 200924, 201057, 200931 Note: Must be ordered at the time of tablet purchase

(factory installed) Key Features:

Rapid and accurate data acquisition for improved efficiency Added efficiency to your asset management workflow Improved inventory management Connect to legacy hardware in the field ZEBRA TECHNOLOGIES 17 R12 Input Devices XSLATE R12 SlateMate:

Barcode / RFID / Serial Port Note: Must be ordered at the time of tablet purchase

(factory installed) Part Numbers:

200445, 200450, 200453, 200457, 200461, 200468, 200377, 200357, 200367, 200369, 200379, 200402, 200693, 200572, 200582, 200513, 200163, 200531, 200543, 200195, 200183, 200172, 200178, 200180, 200182, 200169, 200185, 200186, 200194, 200843, 200901, 200889, 200771, 200828, 200830, 200839, 201058, 201059, 201104, 201109, 201132, 201143, 200920, 200924, 201057, 200931 Specifications:

BARCODE SCANNER:

1D/2D Barcode Scanner Comprehensive Symbologies coverage:

- Aztec

- Code 128

- GS1-128

- Code 39

- Interleaved 2 of 5

- Micro PDF417

- UPC-A

- UPC-E

- EAN-8

- EAN-13

- PDF417

- QR Code RFID READER:

High Frequency 13.56 MHZ Supported Formats:

- ISO/IEC 14443A/B

- ISO/IEC 15693

- MIFARE Classic DIMENSIONS (L X W X H) AND WEIGHT:

9.8 in x 1.9 in x 0.73 in (249mm x 48 mm x 18.5 mm) Weight: 0.225 lb (0.102kg) OS SUPPORT:

Windows (10, 8.1, 7) Professional 64-bit ZEBRA TECHNOLOGIES 18 R12 Input Devices R12 True Serial Cable This cable adds True Serial capability to your R12 tablet. Connects from the mini-HDMI port to legacy True Serial equipment using this convenient I/O expansion option. Part Number:

430036 ZEBRA TECHNOLOGIES 19 R12 Input Devices R12 RJ45/RS232 Dongle RS-232 Part Number:

430033 ZEBRA TECHNOLOGIES The XSLATE R12 RJ45/RS232 Dongle adds Gigabit Ethernet and true Serial capability to your system. Connect with legacy equipment using this convenient I/O expansion option. RJ45 20 R12 Input Devices Additional Digitizer Pen Designed to fit in the pen barn of the R12-Series tablet, the Digitizer Pen provides precision and comfort to write and annotate on your R12 tablet. Write on your tablet PC with the ease of standard paper and pencil by using the digitizer pen. Don't find yourself without your pen - order an additional one and take with you. Key Features:

Write and annotate with precision and comfort Fits in the pen barn of the R12-Series tablet The angular design on one-side of the pen prevents pen from rolling off flat surface One recessed programmable button for optimal flexibility Tips are replaceable and are provided so you have an extra tip in the event one becomes damaged. Color: Black Warranty: 90 days Part Numbers:

440021 440017 (Black Coiled Pen Tether) ZEBRA TECHNOLOGIES 21 R12 Input Devices USB Keyboard This durable USB Keyboard by iKey easily connects to any Xplore Tablet PC providing a functioning 104/105 key typing experience for all desktop and word-processing environments. With its ergonomically designed wrist pad and integrated touch pad, the keyboard provides a comfortable user experience in a compact size. Key Features:

Compact, lightweight, slim and durable design makes this keyboard easy to travel with or use at your desk Integrated touch pad pointing device and mouse buttons 88/89 keys keyboard with embedded numeric keypad and 12 dedicated function keys Elegant wrist pad for comfortable support and rest 2 programmable buttons Full functions of 104/105 key enhanced layout Dimensions: 289mm(L) x 227mm(W) x 27mm(H) Color: Black Weight: 0.72 kg Warranty: 90 days Part Numbers:

420009 ZEBRA TECHNOLOGIES 22 XSLATE R12 Rugged Tablet Accessories Carrying Cases ZEBRA TECHNOLOGIES 23 R12 Carrying Cases Work Anywhere Kit with Shoulder Strap Part Number:

410046 410022 (shoulder strap only) ZEBRA TECHNOLOGIES The XSLATE R12-Series Work Anywhere Kit offers a comfortable and convenient way to carry the R12-Series tablet while standing and walking. The Work Anywhere Kit features a shoulder strap for hands free carrying and a screen cover for extra display protection. The screen cover features a pocket large enough for the Companion Keyboard or up to two spare batteries. The R12-Series Work Anywhere Kit attaches securely to the tablet and works seamlessly with the family of R12-Series accessories including SlateMate and desktop docking stations. Key Features:

Sleeve with access to all ports, batteries and buttons Screen protection cover with pocket for Companion Keyboard and additional batteries Adjustable strap for hands-free use R12 can be docked and used in the Desktop Docking Station while the tablet is in the sleeve Color: Black Case Dimensions (L x W x H) and Weight:

14.5 in x 8.75 in x 1.625 in (368.3 mm x 222.25 mm x 41.28mm) Weight: 0.75 lb (0.34 kg) Strap Dimensions (L x W) and Weight:

47-61 in x 1.625 in (119-155 cm x 41.3 mm) Weight: 3 oz (85 g) 24 R12 Carrying Cases Work Anywhere Kit with Handle Part Number:

410047 410023 (handle only) ZEBRA TECHNOLOGIES The XSLATE R12-Series Work Anywhere Kit offers a comfortable and convenient way to carry the R12-Series tablet while standing and walking. The Work Anywhere Kit features a shoulder strap for hands free carrying and a screen cover for extra display protection. The screen cover features a pocket large enough for the Companion Keyboard or up to two spare batteries. The R12-Series Work Anywhere Kit attaches securely to the tablet and works seamlessly with the family of R12-Series accessories including SlateMate and desktop docking stations. Key Features:

Sleeve with access to all ports, batteries and buttons Screen protection cover with pocket for Companion Keyboard and additional batteries Grip handle for relaxed carrying the tablet is in the sleeve Color: Black R12 can be docked and used in the Desktop Docking Station while Case Dimensions (L x W x H) and Weight:

14.5 in x 8.75 in x 1.625 in (368.3 mm x 222.25 mm x 41.28mm) Weight: 0.75 lb (0.34 kg) Handle Dimensions (L x W) and Weight:

16 in x 1.125 in (405 mm x 28 mm) Weight: 1.4 oz (40 g) 25 XSLATE R12 Rugged Tablet Accessories Other ZEBRA TECHNOLOGIES 26 R12 Other Accessories Integrated Kensington Lock The XSLATE R12 Kensington Lock adds a level of physical security to your XSLATE R12. Integrated directly to the tablet chassis, the Kensington Lock provides a method to tether the tablet with your existing Kensington Lock cable, reducing the potential for theft. Note: Must be ordered at the time of tablet purchase (factory installed) Part Numbers:

200905 201058 ZEBRA TECHNOLOGIES 27 R12 Other Accessories Protective Display Film (3-pack) The R12-Series Protective Display Film is an optically clear, thin protective film with a coating designed to reduce reflections and give a clear, sharp display view even in brightly lit conditions. The screen works with touch screen and digitizer pen displays further protecting the tablet display from everyday scratches. The protective film can be replaced at any time and its special adhesive will not leave a sticky residue behind when removed. The "Matte" type finish has low reflection and is perfect for use with a mounted or fixed display that cannot be moved to avoid direct reflection or if the display is used in bright ambient conditions. The package includes 3 films, soft cloth and alcohol wipe. Part Numbers:

400012 (gloss finish) 400013 (matte finish) ZEBRA TECHNOLOGIES 28 R12 Other Accessories Screen Cleaning Cloth Keep your display clean and smudge free with an approved wiping cloth. These cloths are especially designed to remove dirt and skin oils without damaging the display surface. Part Numbers:

400000 (Screen Cleaning Cloth) ZEBRA TECHNOLOGIES 29 Contact Zebra Technologies Corporation 3 Overlook Point Lincolnshire, IL 60069 www.zebra.com www.xploretech.com ZEBRA and the stylized Zebra head are trademarks of ZIH Corp, registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. 2018 ZIH Corp and/or its affiliates. All rights reserved. 30

XSLATE R12 Tablet PC Model iX125R1 XSLATE R12-Series SlateMate BCS/HF RFID/Serial Model R12-PEM1 XSLATE R12-Series SlateMate HF RFID/Serial Model R12-PEM2 Important Product Information Safety and Regulatory Compliance Limited Warranty Contents Symbol description ....................................................................................................................................... 4 Specifications ............................................................................................................................................... 5 Product safety information .......................................................................................................................... 5 Mounting and installation disclaimer ........................................................................................................... 5 Setup precautions ......................................................................................................................................... 5 Basic personal safety precautions ................................................................................................................ 6 Tablet PC precautions .................................................................................................................................. 7 High risk and dangerous activity warning .................................................................................................... 7 Tablet PC disposal ........................................................................................................................................ 7 Cabling and power cord precautions ....................................................................................................... 7 Battery pack disposal ................................................................................................................................... 8 Travel precautions ........................................................................................................................................ 8 Component replacement precautions ......................................................................................................... 8 Sound pressure/volume notice ..................................................................................................................... 8 Wireless devices............................................................................................................................................ 9 Comfort and health ...................................................................................................................................... 9 Environmental statements ........................................................................................................................... 9 Power adapter precautions ........................................................................................................................ 10 Li-ion battery pack notice .......................................................................................................................... 10 Battery pack warnings and precautions ..................................................................................................... 11 Regulatory and safety compliance ......................................................................................................... 12 Federal Communications Commission notice (USA) ........................................................... 12 Unintentional Emitter per FCC Part 15............................................................................................... 12 The Tablet PC meets the following technical standards: .................................................................. 13 Intentional Emitter per FCC Part 15 ................................................................................................... 13 Internal Bluetooth module notice .......................................................................................................... 14 FCC Radiation Exposure Statement ....................................................................................................... 15 Medical Equipment Safety ..................................................................................................................... 17 Safety and hazards ................................................................................................................................. 20 Modifications .......................................................................................................................................... 21 Cables ..................................................................................................................................................... 21 1 Airline travel notice ................................................................................................................................ 21 Disabling internal wireless operations ............................................................................................... 21 IC notice (Canada only) ............................................................................................................................... 21 Unintentional Emitter per ICES-003 Class B .......................................................................................... 21 Intentional Emitter per RSS 210 ............................................................................................................. 22 Conformit Europne (CE) European Union ........................................................................... 23 Unintentional Emitter ............................................................................................................................ 23 CE Intentional Emitter ............................................................................................................ 23 Radio Frequency exposure statement ....................................................................................................... 24 Wideband Transmission System radio ...................................................................................................... 24 Wireless notices .......................................................................................................................................... 26 Australia/New Zealand (C-Tick) statements ............................................................................... 26 Internal Bluetooth Module Notice Class B Statement .......................................................................... 27 Australia/New Zealand (A-Tick) statement ............................................................................. 27 Radio Frequency Wireless Communication Devices.......................................................................... 28 NOM/NYCE statement ................................................................................................ 28 Internal Bluetooth Module Notice Class B Statement .......................................................................... 28 Radio Frequency Wireless Communication Devices ............................................................................. 29 IRAM statement ............................................................................................................ 29 Internal Bluetooth notice ....................................................................................................................... 29 Radio Frequency Wireless Communication Devices ............................................................................. 30 ANATEL statement ................................................................................. 30 Internal Bluetooth Class B notice ........................................................................................................... 30 Radio Frequency Wireless Communication Devices ............................................................................. 31 Battery notice ............................................................................................................................................. 31 2 Trademarks ................................................................................................................................................. 32 Limited Warranty ....................................................................................................................................... 32 Warranty disclaimer ................................................................................................................................... 32 Warranty period.......................................................................................................................................... 33 Warranty coverage ..................................................................................................................................... 33 Repair or replacement ................................................................................................................................ 33 Software and data ...................................................................................................................................... 34 Warranty exclusions ................................................................................................................................... 34 Limitation of liability .................................................................................................................................. 34 Software technical support ........................................................................................................................ 35 Warranty transfer to another country ........................................................................................................ 35 Australia ...................................................................................................................................................... 35 Warranty period...................................................................................................................................... 36 Warranty coverage ................................................................................................................................. 37 Repair or replacement ............................................................................................................................ 37 Software and data .................................................................................................................................. 37 Warranty exclusions ............................................................................................................................... 38 Limitation of liability .............................................................................................................................. 38 Software Technical Support ................................................................................................................... 39 What you need to do to be entitled to claim under this Limited Warranty: ......................................... 39 How to make a claim under this Limited Warranty: .............................................................................. 39 3 This document contains regulatory, precautionary, and recycling information for the Xplore iX125R1 Tablet PC. To avoid injury, read this document and understand its contents before you use the Tablet PC. Keep this document nearby, so you can refer to it later. For detailed operating instructions and safety information, see https://support.xploretech.com/us/support/userdocs/

The Xplore Tablet PC Model iX125R1 is marketed and/or known as the XSLATE R12. Symbol description The following symbols may appear on the products or accessories. Federal Communications Commission Compliance with Nemko CCL for general product safety in accordance with UL 60950-1 (ITE) and CAN/CSA C22.2 No. 60950-1 (ITE) Canada Interference-Causing Equipment Standard #3 Class B devices Compliance with RED Directive 2014/53/EU for radio frequency devices Conformit Europne; compliance to EMC and Low Voltage Directives of the European Union Product complies with 2012/19/EU Compliance with the Independent Communications Authority of South Africa Compliance with Australian and New Zealand EMC, EMR, Radio communication, and Telecommunication Standards (A-Tick symbol) Compliance with the Korea Certification Commission for EMC, Safety, and Telecommunications Infocomm Development Authority for Singapore Normalizacion Y Certification Electronica A.C. (NYCE) 4 Instituto Argentino de Normalizacin y Certificacin (IRAM) Agncia Nacional de Telecomunicaes (ANATEL) Specifications Temperature Humidity Air pressure Power supply (ITE) Delta Electronics, SADP-65WH Rev. BB Off

-30 C to 70 C / -22 F to 158 F On

-10 C to 55 C / 14 F to 131 F 23 C to 60 C / 73 F to 140 F, 95% Non-Condensing, 10 Days 6971060 hPa Input: 1.5 A, 100240 VAC, 4763 Hz Output: 19 V DC, 3.42 A The power supply is compliant with UL 60950-1, CAN/CSA C22.2 No. 60950-1 1871060 hPa Product safety information Xplore Tablet PCs are designed to optimize safety, minimize strain, and withstand the rigors of portability. However, to further reduce the risk of injury or damage to the unit, you should observe certain precautions. Mounting and installation disclaimer Xplore Technologies shall not be liable under any theory of liability (including, without limitation, contract, tort, or statutory law) for any loss, damage, personal injury, or other damage of any nature

(including, without limitation, direct, special, incidental, or consequential damages) arising directly or indirectly as a result of improper or inappropriate placement, installation, or use of its products or any other application. To safely install and use Xplore products, full consideration of occupants, systems

(e.g., the location of fuel lines, navigation systems, brakes lines, electrical, drive train or other systems), air-bags and other back-up, warning, or safety equipment is required. Without limiting the foregoing, Xplore specifically disclaims any responsibility for the placement, use, or installation of its products not consistent with (i) the original manufacturers or governmental or regulatory specifications and recommendations for the environment where the products will be placed, used, or installed, (ii) Xplore written product instruction sheets, or (iii) workmanship standards. Setup precautions Review the following setup precautions:

Read the installation instructions before connecting the Tablet PC to the power supply. 5 If you put the Tablet PC in a docking station, place it on a level surface so it does not fall over and damage the unit, the docking station, or other components. When you move the Tablet PC between environments with very different humidity and/or temperature ranges, allow sufficient time to adjust to the new humidity or temperature. Do not drop the Tablet PC or subject it to other mechanical shocks as this can cause cosmetic imperfections and/or system malfunctions. Do not apply heavy pressure to the Tablet PC or subject it to strong impact. Excessive pressure or impact can cause damage to Tablet PC components or otherwise cause malfunctions. Do not use the Tablet PC AC adapter for other equipment. This can generate heat or fire. In addition, do not use other AC adapters with the Tablet PC. When using the Tablet PC for long periods of time, rest your eyes for approximately 10 to 15 minutes every hour. Failing to rest your eyes can cause eye strain and other deterioration of eye health. Basic personal safety precautions Review the following personal safety precautions:

Do not attempt to service the Tablet PC or its components yourself. Perform only those service procedures for which Xplore provides special instructions, for example, hot-swapping a battery or installing a peripheral device. Turn off the Tablet PC completely to clean it, its components, or chassis, or perform operations requiring similar steps. To do this, turn off the power switch, then disconnect the AC adapter from the electrical outlet. Do not operate the Tablet PC near water, such as near a bathtub, kitchen sink or laundry tub, in a wet basement, by a swimming pool, or in the rain while plugged into an electrical outlet. The cases, portfolios, and other accessories currently offered by Xplore are not designed to be water-resistant or watertight. Do not submerse the tablet in water or other fluids. Do not connect or disconnect any cables or perform maintenance or reconfiguration of this product during an electrical storm. Avoid using the wireless modem, wireless LAN, or wired LAN during an electrical storm, because there is a remote risk of electric shock from lightning. Do not push foreign objects into air vents or other openings of the Tablet PC or accessories, such as the optional external optical disk drive bays. Doing so can short out interior components and may cause fire or electric shock. If the Xplore battery pack leaks and the fluid gets in your eyes, do not rub them. Instead, rinse your eyes with clean running water and immediately seek medical attention. Otherwise, eye injury may result. If leakage from the battery pack comes in contact with your skin or clothing, immediately wash it away with running water. Otherwise, skin inflammation can occur. Do not operate the Tablet PC or power adapter for extended periods of time with the base resting directly on exposed skin. The surface temperature can rise during normal operation, particularly when AC power is used. Sustained contact with exposed skin can cause discomfort or burns. 6 Tablet PC precautions Review the following Tablet PC precautions:

Certain environments may contain particles or debris that can adhere to the Tablet PC display or to the Tablet PC pen tip. To avoid damaging the display, clean it frequently with the cleaning cloth offered by Xplore or with a soft cloth. Apply window-type cleaner or water to the cloth, and then clean the tablet with the cloth. For a list of approved cleaning solutions, see https://www.xploretech.com/us/motion-r12/specs/

Change pen tips regularly, especially if you work in an environment that contains particles or debris. Dropping the pen onto a rough surface may damage the pen tip or embed particles in it that can damage the Tablet PC display. For instructions about changing the pen tips, see the Users Guide at https://support.xploretech.com/us/support/userdocs/

Store the pen in the pen bay of the Tablet PC. Carrying it in a pocket, toolbox, or similar receptacle that contains particles or debris may damage the pen tip or embed particles in it that can damage the Tablet PC display. For audio sound pressure statements, see page 9. High risk and dangerous activity warning This computer system is not intended to be used as a medical device or for use in high-risk or dangerous activities, including without limitation, the operation of nuclear facilities, aircraft navigation or communications systems, hospital or medical operations, air traffic control machines, treating, diagnosing, or monitoring patients, or for any other uses where the failure of the computer system could lead to death, personal injury, or severe environmental damage. Tablet PC disposal Review the following precautions:

Do not dispose of the Tablet PC with general waste. If you cannot locate a disposal site, contact your reseller or Xplore Technologies for assistance in locating a disposal site near your locale. Cabling and power cord precautions Review the following cabling and power cord precautions:

Power cord sets for use in other countries must meet the requirements of that country. Use the appropriate AC adapter and power cord for your locale. For information about power cord set requirements, contact the Xplore Reseller from whom you purchased the product, or contact Xplore Technologies if you purchased the product from Xplore Technologies. If no power cord was provided for your Tablet PC or an accessory, purchase a power cord that is approved for use in your country and that matches the required voltage and amperage rating. If you use an extension cord with your AC adapter, ensure that the total ampere rating of the products plugged into the extension cord does not exceed the ampere rating of the extension cord. 7 When using your power cord, make sure to position it around objects so it will not be cut or punctured. Battery pack disposal Review the following battery pack disposal precautions:

Dispose of the lithium ion battery packs only at approved disposal sites. To locate an appropriate site, contact the solid waste disposal officials where you live or look for a rechargeable battery recycling Web site that lists disposal locations near you. Do not dispose of battery packs in a fire, throw them in a trash receptacle, put them in a recycling bin not intended for their disposal, or otherwise discard them in a manner that may result in there being hazardous to the environment. Travel precautions Review the following travel precautions:

When traveling, do not store the Tablet PC in an overhead compartment or other area where it could slide around, and do not check it in your baggage. Do not put the Tablet PC through a metal detector. You can safely put it through an X-ray security machine without harming any components. Be sure to charge the battery before you hand-check the Tablet PC. You may be asked to turn the Tablet PC on at a baggage checkpoint. Ensure that your Tablet PC is configured for air travel before you board the airplane. Component replacement precautions Review the following component replacement precautions:

Use only components sold by Xplore Technologies with your Tablet PC. Installation or use of non-Xplore components may damage the Tablet PC and/or its components and void the warranty. Components currently available from Xplore Technologies as user replaceable parts include an AC power adapter (rated for general use) and battery pack. These components may change from time to time. Contact Xplore Technologies for more information or if you have questions about replacing a specific component. Do not replace or attempt to service internal Tablet PC components such as the hard disk drive, Bluetooth card, internal antennas, memory modules, or wireless module components. Such actions can damage the Tablet PC and/or its components and void the warranty. Sound pressure/volume notice Excessive sound pressure from earphones or headphones can cause hearing damage and hearing loss. Adjustments of the volume control or equalizer to settings other than the default setting can increase 8 earphone and headphone output voltage and therefore increase the volume and sound pressure levels to levels above the healthy range. Wireless devices Although Xplore sells and may recommend certain wireless Mini PCI-Express devices for the Tablet PC, these should only be installed by Xplore or a qualified Xplore repair facility. If you choose to install non-

approved wireless devices yourself, you may damage the equipment and/or its internal components and void the warranty. Contact Xplore Technologies or your authorized Xplore reseller for information about recommended repair facilities and locations near you. Comfort and health HEALTH WARNING: Using a keyboard or pointing device may be linked to serious injuries or disorders. For more information, visit the Mayo Clinic Web site at www.mayoclinic.com. You can help prevent occasional discomfort in your hands, arms, shoulders, neck, and other parts of your body by:

Taking frequent breaks to stretch and change your working position. Resting your hands and wrists frequently so they have time to recover from repetitive movements. Use a wrist pad. Using the touch pad on a keyboard or the Tablet PC pen, which change the way you use your hands and wrists, and can provide a break from the keyboard and mouse. If symptoms persist or continue to occur and include pain, throbbing, aching, tingling, numbness, burning sensations, or stiffness, DO NOT IGNORE THESE WARNING SIGNS. PROMPTLY SEE A QUALIFIED HEALTH PROFESSIONAL. Environmental statements Review the following environmental statements:

The extraction and use of natural resources are required in the production of the equipment you purchased. The equipment may contain hazardous substances that could impact health and the environment if not disposed of using environmental disposal systems available in your region. To prevent the dissemination of those substances in our environment and to diminish the impact on the natural resources, we encourage you to use appropriate take-back environmental disposal systems. Those disposal systems will reuse or recycle most of the materials of your end-life equipment in compliance with current environmental conventions. The crossed-out wheeled bin symbol prompts you to use those environmental disposal systems. If you need more information about collection, disposal, reuse, and recycling systems, please contact your local or regional waste administration. This product follows Directive 2011/65/EC of the European Parliament and of the Council set into force in June 2011. This Directive set into force procedures regarding the restriction of the use of certain substances in electric and electrical equipment (ROHS). 9 This product follows Directive 2012/19/EC of the European Parliament and of the Council set into force in July 2012. This Directive set into force procedures regarding the Waste of Electrical and Electronic Equipment (WEEE). Xplore Technologies Incorporated is a participant in the Take Back program established in the WEEE Directive and assumes full responsibility for the disposal take back of its products. This product follows Directive 2009/12/EC of the European Parliament and of the Council set into force on November 2009. This Directive established the framework for setting the eco-

design requirements for energy-using products and amending Council Directives 92/42/EEC, 96/57/EC, 2000/55/EC, and 2005/32/EC of the European Parliament and of the Council. This product follows Commission Regulation (EC) No. 278/2009. The Regulation set forth procedures for implementing Directive 2005/32/EC of the European Parliament and of the Council regarding eco-design requirements for No-Load condition electric power consumption and average active efficiency of external power supplies. The Xplore power supply meets the requirements and guidelines of the Commission Regulation (EC) No. 278/2009. Xplore Technologies Incorporated ensures that this product does not contain any substances proposed for inclusion to be listed in the Substances of Very High Concern (SVHC) Candidate List (Art. 59.1 of Regulation No. 1907/2006 updated June 18, 2010) in an individual concentration of greater than or equal to 0.1% by weight. Also, you can contact Xplore Technologies, Inc. for more information about the environmental processes for our products. Power adapter precautions Use only the AC adapter and power cord approved for this Tablet PC or Tablet PC accessory. Use of another type of AC adapter may risk fire or explosion. Place the AC adapter in a ventilated area, such as on a desktop or the floor, when you use it to run the Tablet PC or to charge the battery. Do not cover the AC adapter with papers or other items that will reduce cooling; also, do not use the AC adapter while it is inside a carrying case. Ensure that nothing rests on the AC adapters power cable and that the cable is not located where it can be tripped over or stepped on. Ensure that the outlet is near the equipment and is easily accessible. Disconnect power cords and cables by grasping the connector, not by pulling on the cable itself. As you pull out the connector, keep it evenly aligned to avoid bending any connector pins. Before you connect a cable, make sure both connectors are correctly aligned Li-ion battery pack notice Xplore Technologies sealed lithium ion batteries comply with all applicable shipping regulations as prescribed by industry and legal standards. This includes compliance with all the UN Recommendations on the Transport of Dangerous Goods; IATA (International Air Transport Agency) Dangerous Goods Regulations, 44th Edition, 2003, Special Provisions A45, and applicable U.S. DOT regulations for the safe transport of lithium ion batteries. Each Xplore Technologies cell or battery has been tested under provisions of the UN Manual of Tests and Criteria, Part III, Sub-section 38.3. 10 Xplore Technologies product packaging containing Li-ion battery packs are labeled in accordance with the updated National Transportation Safety Board (NTSB); Pipeline Hazardous Material Safety Administration (PHMSA); International Air Transport Agency

(IATA); and the International Civil Aviation Organization (ICAO) rules outlined within the Technical Instruction document references:

1. Technical Instructions for the Safe Transport of Dangerous Goods by Air (Doc 9284). 2. Emergency Response Guidance for Aircraft Incidents Involving Dangerous Goods (Doc 9481). Battery pack warnings and precautions The Tablet PC contains an internal lithium ion (Li-ion) battery pack. Replace the internal battery pack only with a Xplore battery or a Xplore-recommended equivalent to avoid the risk of fire or explosion resulting in personal injury. Do not use the battery pack in combination with other types of battery packs (such as dry-cell battery packs), except for a R12 additional battery available from Xplore Technologies, or battery packs with different capacities or brands. This can result in it being over-discharged during use or overcharged during recharging, possibly causing it to leak, overheat, emit smoke, burst, and/or ignite. Do not dispose of batteries in a fire. They may explode. Dispose of used batteries according to the manufacturers instructions. The label on the battery lists the manufacturers name. See the section Page 9 for more information about battery disposal. Do not use or leave the battery pack near a heat source. Heat can melt the insulation and damage other safety features, possibly causing it to leak, overheat, emit smoke, burst, and/or ignite. Do not immerse the battery pack in water or allow it to get wet. Its protective features can be damaged; it can be charged with extremely high current and voltage, and abnormal chemical reactions may occur, possibly causing it to leak, overheat, emit smoke, burst, and/or ignite. Do not disassemble or modify the battery pack. If disassembled, the battery pack can leak, overheat, emit smoke, burst, and/or ignite. Do not connect the positive (+) and negative (-) terminals with a metal object such as wire. Short-circuiting may occur causing the battery pack to leak, overheat, emit smoke, burst, and/or ignite. Do not pierce the battery pack with a sharp object, strike it with a hammer, step on it, or throw it. These actions can damage or deform it, internal short-circuiting can occur, possibly causing it to leak, overheat, emit smoke, burst, and/or ignite. Do not use an apparently deformed or damaged battery pack, which may leak, overheat, emit smoke, burst, and/or ignite. Do not directly solder the battery pack. Heat can melt the insulation and damage other safety features, possibly causing it to leak, overheat, emit smoke, burst, and/or ignite. Store the battery pack in a location where children cannot reach it. Make sure children do not remove the battery pack from the Tablet PC or charger. If the battery pack leaks, gives off a bad odor, generates heat, becomes discolored or deformed, or in any way appears abnormal during use, recharging or storage, immediately remove it from the Tablet PC or charger and stop using it. If this is discovered when you first use 11 the battery, return it to your Xplore reseller or to Xplore Technologies, if you bought it directly from Xplore. Do not transport the lithium ion batteries used in your Tablet PC in checked baggage. You may take up to two spare batteries in carry-on baggage in addition to the one in your Tablet PC. Transporting batteries in checked baggage or transporting more than two spare batteries in carry-on baggage violates transportation law. Remember to remove batteries from the battery charger before transporting it in carry-on or checked baggage. Regulatory and safety compliance The following sections describe regulatory and safety compliance by country and by region. Note: To determine which regulatory and safety marks apply to a specific product, component, or accessory, check the product label affixed to the product and/or its components. Federal Communications Commission notice (USA) Electromagnetic Interference (EMI) is any electromagnetic disturbance that interrupts, obstructs, or otherwise degrades or limits the effective performance of electronics or electrical equipment. These emissions can potentially disrupt, degrade, or otherwise interfere with authorized electronic emissions, which may include television, AM/FM broadcasts, cellular services, radar, air-traffic control, and pagers. The FCC Rules and Regulations have established Radio Frequency (RF) emission limits to provide an interference-free RF spectrum. Many electronic devices, including computers, generate RF energy incidental to their intended function and are, therefore, covered by these rules. Unintentional Emitter per FCC Part 15 The rating label on Xplore Tablet PCs, docking stations, and all accessories show which class (A or B) these devices fall into. Class B devices have an FCC logo (shown here) or FCC ID on the label. Class A devices do not have an FCC ID on the label. Once you determine the class of the device, refer to the following corresponding statement and to the FCC notices in this Safety and Regulatory Guide. Class A is a digital device that is marketed for use in a commercial, industrial, or business environment, exclusive of a device that is marketed for use by the general public or is intended to be used in the home. Class B is a digital device that is marketed for use in a residential environment notwithstanding use in commercial, business, and industrial environments. Examples of such devices include, but are not limited to, personal computers, calculators, and similar electronic devices that are marketed for use by the general public. This device complies with Part 15 of the Federal Communications Commission (FCC) Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. Class B Equipment: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. 12 This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturers instruction manual, may cause interference with radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference with one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment to an outlet on a circuit different from that to which the receiver is Increase the separation between the equipment and the receiver. connected. Consult the dealer or an experienced radio/television technician for help. The following information is provided on the device or devices covered in this document in compliance with FCC regulations:

Xplore Tablet PC model number: iX125R1 Company name: Xplore Technologies, Incorporated 14000 Summit Dr, Suite 900 Austin, TX 78728 USA Telephone: 512-637-1100 Fax: 512-637-1199 Manufacturer name:

Pegatron Corporation No. 76, Ligong Street Beitou, Taipei 112, Taiwan Telephone: (866) 281439001 Fax: (866) 281437915 FCC Part 15 B Class B (Unintentional) FCC Part 15C (Intentional) FCC Part 15E (UNII) FCC Part 22 (WWAN) FCC Part 24 (WWAN) FCC Part 27 (WCS) OET 65 Supplement C (SAR) UL 60950-1 (Safety) The Tablet PC meets the following technical standards:

Intentional Emitter per FCC Part 15 Embedded in your Tablet PC are various Radio Frequency (RF) wireless communication devices. It may contain one or more radio-type devices that operate in the following bands:

525600 KHz band 13.57 MHz (SlateMate RFID) 13 704716 MHz band 777787 MHz band 824849 MHz band 17101755 MHz band 18501915 MHz band 24002496 MHz band 51505850 MHz band All radio-type devices embedded in your Tablet PC have met all the qualifications for use under FCC regulations and guidelines. Internal Bluetooth module notice Class B Equipment: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturers instruction manual, may cause interference with radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference with one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment to an outlet on a circuit different from that to which the receiver is Increase the separation between the equipment and the receiver. connected. Consult the dealer or a radio/television technician for help. This device complies with Part 15 of the Federal Communications Commission (FCC) Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. FCC CAUTION: Any changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. WARNING: Do not attempt to service the wireless communication device built into the Tablet PC yourself. Such action may void the warranty on the Tablet PC. Contact your Xplore Reseller or Xplore Technologies for information about servicing your wireless communication device. Note: The Radio Frequency (RF) emitter installed in your Tablet PC must not be located or operated in conjunction with any other antenna or transmitter. The 802.11 (WLAN) and 3G/4G mobile broadband

(WWAN) transmitters cannot function or transmit at the same time. Before selecting the radio (WLAN or WWAN) to be used, the user must disable the radio that will not be used. In addition, the 3G/4G mobile broadband (WWAN) Xplore Connection Manager will alert the operator to disable WLAN functionality before allowing connection to the 3G/4G network. 14 FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The FCC requires indoor use for the 5.155.25 GHz band to reduce the potential for harmful interference to co-channel Mobile Satellite Systems. Therefore, it will only transmit on the 5.255.35 GHz, 5.475.725 GHz and 5.7255.850 GHz band when associated with an access point (AP). FCC CAUTION: This device was tested for SAR (Specific Absorption Rate) in a body-worn and portable configuration. The device was found to comply with the FCC requirements for RF exposure when used in the docking station, held in the hand, or placed on the lap when tested with a separation distance of 0mm. Internal radio(s) may have an individual FCC Identifier that does not apply to this configuration. Only the FCC ID (Identifier) shown on the label(s) located inside the battery bay of the R12 (Model: iX125R1) Tablet PC is applicable to this internal radio configuration. The R12 (Model: iX125R1) Tablet PC must not be co-located or operating in conjunction with any other antenna or transmitter than specified in the certification of the FCC Identifier(s) shown on the label. Antenna/Radio information Frequency 2.4GHz 5.15-

5.25GHz 5.25-

5.35GHz 5.47-

5.65GHz 5.65-

5.725GHz Bandwidth (MHz) 20/40 20/40/80 20/40/80 20/40/80 20/40/80 Modulation CCK/OFDM OFDM OFDM OFDM OFDM Max Output Power

(dBm) 23.86 17.28 18.17 18.42 18.80 Frequency 699-716MHz 777-787MHz 814-849MHz 5.725-

5.85GHz Bandwidth (MHz) 20/40/80 1.4/3/5/10 5/10 1.4/3/5/10/15 1710-

1755MHz 1.4/3/5/10/15

/20 Modulation OFDM OFDM OFDM OFDM OFDM Max Output Power

(dBm) 22.97 24.48 24.48 24.48 26.31 15 Frequency 1850-1915MHz 2305-

2315MHz Bandwidth (MHz) 1.4/3/5/10/15 5/10 Modulation OFDM OFDM Max Output Power

(dBm) 26.31 23.21 16 Medical Equipment Safety electrical equipment. This portable equipment and mobile RF communications equipment can affect medical This medical electrical equipment needs special precautions regarding EMC and needs to be installed and put into service per the EMC information provided in the accompanying documents. This ME equipment or ME system should not be used adjacent to or stacked with other equipment and that if adjacent or stacked use is necessary, the ME equipment or ME system should be observed to verify normal operation in the configuration in which it will be used. The use of accessories, transducers, and cables other than those specified, except for transducers and cables sold by the manufacturer of the equipment or system as replacement parts for internal components, may result in increased emissions or decreased immunity of the ME equipment or ME system. Table 1-1: Guidance and manufacturers declaration electromagnetic emissions for all ME equipment and ME Guidance and manufacturers declaration electromagnetic emissions The XSlate R12 Rugged Tablet PC is intended for use in the electromagnetic environment specified below. The customer or the user of the XSlate R12 Rugged Tablet PC should assure that it is used in such an environment. 17 Emissions test RF emissions (CISPR 11) RF emissions (CISPR 11) Harmonic emissions (IEC 61000-

3-2) Voltage fluctuations/ flicker emissions (IEC 61000-3-3) Notes:

None Compliance Group 1 Class B Class A Complies Electromagnetic environment guidance The XSlate R12 Rugged Tablet PC uses RF energy only for its internal function. Therefore, its RF emissions are very low and are not likely to cause any interference in nearby electronic equipment. The XSlate R12 Rugged Tablet PC is suitable for use in all establishments, including domestic establishments and those directly connected to the public low-voltage power supply network that supplies buildings used for domestic purposes. Table 1-2: Guidance and manufacturers declaration electromagnetic immunity For all ME equipment and ME systems The XSlate R12 Rugged Tablet PC is intended for use in the electromagnetic environment specified below. The customer or the user of the XSlate R12 Rugged Tablet PC should assure that it is used in such an environment. Immunity test Test level Compliance level 6 kV contact 8 kV air 6 kV contact 8 kV air Electromagnetic environment guidance Floors should be wood, concrete or ceramic tile. If floors are covered with synthetic material, the relative humidity should be at least 30 %. Electrostatic discharge

(ESD) (IEC 61000-4-2) Electrical fast transient/burst (IEC 61000-

4-4) Surge (IEC 61000-4-5) Voltage dips, short interruptions and voltage variations on power supply input lines (IEC 61000-4-

11) Power frequency (

50/60 Hz) magnetic field

(IEC 61000-4-8) Notes:

None 2 kV for power supply lines 2 kV for power supply lines 1 kV for input/output lines 1 kV for input/output lines Mains power quality should be that of a typical commercial or hospital environment. 1 kV differential mode 1 kV differential mode 2 kV common mode 2 kV common mode Mains power quality should be that of a typical commercial or hospital environment.

<5 % UT

(>95 % dip in UT) for 0,5 cycle 40 % UT

(60 % dip in UT) for 5 cycles 70 % UT

(30 % dip in UT) for 25 cycles

<5 % UT

(>95 % dip in UT) for 5 sec

<5 % UT

(>95 % dip in UT) for 0,5 cycle 40 % UT

(60 % dip in UT) for 5 cycles 70 % UT

(30 % dip in UT) for 25 cycles

<5 % UT

(>95 % dip in UT) for 5 sec 3 A/m 3 A/m Mains power quality should be that of a typical commercial or hospital environment. If the user of the XSlate R12 Rugged Tablet PC requires continued operation during power mains interruptions, it is recommended that the XSlate R12 Rugged Tablet PC be powered from an uninterruptible power supply or a battery. NOTE: UT is the a.c. mains voltage prior to application of the test level. Power frequency magnetic fields should be at levels characteristic of a typical location in a typical commercial or hospital environment. 18 Table 0-3: Guidance and manufacturers declaration electromagnetic immunity for ME equipment and ME systems that are not Life-Supporting The XSlate R12 Rugged Tablet PC is intended for use in the electromagnetic environment specified below. The customer or the user of the XSlate R12 Rugged Tablet PC should assure that it is used in such an environment. Immunity test Test level Compliance level Electromagnetic environment guidance Conducted RF

(IEC 61000-4-6) Radiated RF

(IEC 61000-4-3) 3 Vrms 150 kHz to 80 MHz 3 V/m 80 MHz to 2.5 GHz 3 Vrms 150 kHz to 80 MHz 3 V/m 80 MHz to 2.5 GHz

3.5 1 3.5 1 7 1

] 80 800

] 800 2.5 Portable and mobile RF communications equipment should be used no closer to any part of the XSlate R12 Rugged Tablet PC including cables, than the recommended separation distance calculated from the equation applicable to the frequency of the transmitter. Recommended separation distance where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer and d is the recommended separation distance in metres (m). Field strengths from fixed RF transmitters, as determined by an electromagnetic site survey, (a) should be less than the compliance level in each frequency range. (b) Interference may occur in the vicinity of equipment marked with the following symbol:

Notes:

NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies. NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people.

(a) Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due to fixed RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the XSlate R12 Rugged Tablet PC is used exceeds the applicable RF compliance level above, the XSlate R12 Rugged Tablet PC should be observed to verify normal operation. If abnormal performance is observed, additional measures may be necessary, such as reorienting or relocating the XSlate R12 Rugged Tablet PC.

(b) Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 V/m. 19 Table 1-4: Recommended separation distances between portable and mobile RF communications equipment and the ME equipment or ME system for ME equipment and ME systems that are not life-supporting The XSlate R12 Rugged Tablet PC is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the XSlate R12 Rugged Tablet PC can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the XSlate R12 Rugged Tablet PC as recommended below, according to the maximum output power of the communications equipment. Separation distance according to frequency of transmitter (m)

150 kHz to 80 MHz outside ISM bands

. 0.117 0.369 1.167 3.689 11.667

80 MHz to 800 MHz

. 0.117 0.369 1.167 3.689 11.667

800 MHz to 2.5 GHz 0.233 0.738 2.333 7.379 23.333 Notes:

For transmitters rated at a maximum output power not listed above, the recommended separation distance d in metres (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer. NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies. NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people. Rated maximum output power of transmitter (W) 0.01 0.1 1 10 100 Safety and hazards Do not operate your EM7455 module:

In areas where blasting is in progress Where explosive atmospheres may be present including refueling points, fuel depots, and chemical plants Near medical equipment, life support equipment, or any equipment which may be susceptible to any form of radio interference. In such areas, the EM7455 module MUST BE POWERED OFF. Otherwise, the EM7455 module can transmit signals that could interfere with this equipment. In an aircraft, the EM7455 module MUST BE POWERED OFF. Otherwise, the EM7455 module can transmit signals that could interfere with various onboard systems and may be dangerous to the operation of the aircraft or disrupt the cellular network. Use of a cellular phone in an aircraft is illegal in 20 some jurisdictions. Failure to observe this instruction may lead to suspension or denial of cellular telephone services to the offender, or legal action or both. Some airlines may permit the use of cellular phones while the aircraft is on the ground and the door is open. The EM7455 module may be used normally at this time. This device contains FCC ID: Q2GEM7455 Contains transmitter module IC: 4596A-EM7455 Modifications Any changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. The FCC requires that you be notified that any changes or modifications made to this device that are not expressly approved by Xplore Technologies, Inc. may void your authority to operate the equipment. Cables Connections to this Tablet PC must be made only with shielded cables. This reduces possible interference with radio communications and complies with FCC Rules and Regulations for this EMC classification. Airline travel notice The FAA requires that you suspend wireless operations before boarding an airplane. These include both internal and external wireless devices. Disabling internal wireless operations Important: Use Xplore Dashboard to disable internal Tablet PC wireless operations. (Start >

All Programs > Xplore Technologies > Xplore Dashboard) Tap Wireless, then disable any wireless adapters such as Wi-Fi (802.11), Bluetooth, and mobile broadband (WWAN). To disable external wireless devices installed in the Tablet PC ExpressCard slot or attached to the Tablet PC, eject the card or unplug the external device. To disable external devices through software, see the instructions that came with the device or contact the device manufacturer. IC notice (Canada only) Unintentional Emitter per ICES-003 Class B Xplore Technologies Tablet PCs are classified by the Industry Canada (IC) Interference-causing Equipment Standard #3 (ICES-003) Issue 3 as a Class B digital device. This classification is located on the label on the bottom of your Tablet PC. The Tablet PC meets the following technical standards:

IEES-003 Class B RSS-210 21 RSS-102 RSS-132 RSS-133 CSA CAN C22.2 No. 60950-1 Look for a statement on the label similar to the following:

Canada ICES-003, Class/Classe B This Class B (or Class A, if so indicated on the registration label) digital apparatus meets the requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numrique de la Classe B (ou Classe A, si ainsi indiqu sur ltiquette denregistration) respecte toutes les exigences du Rglement sur le Matriel Brouilleur du Canada. Intentional Emitter per RSS 210 Embedded in your Tablet PC are various Radio Frequency (RF) wireless communication devices. It may contain one or more radio-type devices that operate in the following bands:

525600 KHz band 13.57 MHz (SlateMate RFID) 824960 MHz band 17102170 MHz band 18501990 MHz band 24002496 MHz band 51505850 MHz band All radio-type devices embedded in your Tablet PC comply with RSS 210 and RSS-102 standards of Industry Canada. Operation of this wireless communication device is subject to the following two conditions:

This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. The device could automatically discontinue transmission in case of absence of information to transmit or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology. The device for the band 51505250 MHz is for indoor-only usage to reduce potential for harmful interference to co-channel mobile satellite systems; the maximum antenna gain permitted (for devices in the bands 52505350 MHz and 54705725 MHz) to comply with the e.i.r.p. limit; and the maximum antenna gain permitted (for devices in the band 57255850 MHz) to comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate, as stated in section A9.2(3). In addition, High-power radars are allocated as primary users (meaning they have priority) of the band 52505350 MHz and this radar could cause interference and/or damage to LE-LAN devices. The Country Code selection feature is disabled for products marketed in the USA and Canada. 22 Lutilisation de ce dispositif est autorise seulement aux conditions suivantes: (1) il ne doit pas produire de brouillage et (2) lutilsateur du dispositif doit ntre prt a accepter tout brouillage radiolectrique recu, meme si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. The term IC before the equipment certification number only signifies that the Industry Canada technical specifications were met. This equipment complies with Industry Canada Radio Frequency Electromagnetic Signal (RF) exposure limits set forth for an uncontrolled environment of portable transmission when tested with a 0mm separation distance.. Conformit Europne (CE) European Union Unintentional Emitter The (Conformit Europne) symbol found on the Tablet PC indicates compliance to the EMC Directive and the Low Voltage Directive of the European Union. This means that the Tablet PC meets the following technical standards:

EN 55022 (CISPR22) Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment. EN 55024 (CISPR24) (IEC 61000 4-2, 4-3, 4-3, 4-5, 4-6, 4-8, 4-11) Information Technology Equipment-Immunity Characteristics Limits and Methods of Measurement. EN 61000 3-2 (IEC 61000 3-2) Electromagnetic compatibility (EMC) Part 3: Limits Section 2: Limitations for harmonic current emissions (Equipment input current up to and including 16 A per phase). EN 61000 3-3 (IEC 61000 3-3) Electromagnetic compatibility (EMC) Part 3: Limits Section 3:

Limitations of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current up to and including 16 A. CE Intentional Emitter The CE mark shown here is a device ID that means the product complies with the essential requirements of the RED Directive 2014/53/EU with essential test suites. Embedded in your Tablet PC are various Radio Frequency (RF) wireless communication devices. It may contain one or more radio-type devices that operate in the following bands:

525600 KHz band 13.57 MHz (SlateMate RFID) 832862 MHz band 880915 MHz band 17101785 MHz band 19201980 MHz band 23 25002570 MHz 24002496 MHz band 51505850 MHz band All radio-type devices embedded in your Tablet PC comply with standards:

EN60950-1 (IEC 60950-1:2006 +A11:2009) Safety of Information Technology Equipment. ETSI EN300 328-2 Electromagnetic compatibility and radio spectrum matters (ERM). ETSI EN301 893 5 GHz High performance of RLA; Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive. ETSI EN301-489-1 / 17 Electromagnetic compatibility (EMC) standard for radio equipment and services. ETSI EN 62311 Generic standard to demonstrate the compliance of electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields {0Hz 300 GHz}. ETSI EN 301-511 Harmonized EN for Mobile Stations in the GSM 900 and GSM 1800 Bands Covering Essential Requirements Under Article 3.2 of the R&TTE Directive (1999/5/EC). ETSI EN 301-908-1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 1: Harmonized EN for IMT-2000, introduction and common requirements, covering essential requirements of article 3.2 of the R&TTE Directive. ETSI EN301-489-7 -EMC standard for Radio Spectrum Matters (ERM) for radio equipment and services part 7; specific conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecommunications systems {GSM and DCS}. ETSI EN301-489-24 EMC standard for Radio Spectrum Matters (ERM) for radio equipment and services part 24; specific conditions for IMT-2000 CDMA Direct Spread (UTRA) for mobile and portable (UE) radio and ancillary equipment. Radio Frequency exposure statement If your Tablet PC is configured with a 3G/4G mobile broadband (WWAN) module, your Tablet PC was tested for Specific Absorption Rate (SAR) in a body-worn or portable configuration. All users of this product will not be exposed to harmful radio frequencies. Wideband Transmission System radio Wideband Transmission Systems operating in frequency bands of 51505350 MHz in all EU Member States, including candidate countries, respectively, are restricted to indoor use only. The Wideband transmission system radio in your Tablet PC contains a custom antenna that complies with the following directives:

English Hereby, Xplore Technologies, Incorporated declares that the iX125R1 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. 24 German Hiermit, Xplore Technologies, Incorporated erklrt, dass die iX125R1 in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EG befindet. French Par la prsente, Xplore Technologies, Incorporated dclare que la iX125R1 est en conformit avec les exigences essentielles et autres dispositions pertinentes de la directive europenne 1999/5/CE. Czech Tmto, Xplore Technologies, Incorporated prohlauje, _e iX125R1 je ve shode se zkladnmi po_adavky a dalmi prslunmi ustanovenmi smernice 1999/5/ES. Danish Hermed, Xplore Technologies, Incorporated erklrer, at iX125R1 er i overensstemmelse med de vsentlige krav og vrige relevante bestemmelser i direktiv 1999/5/EF. Estonian Kesolevaga, Xplore Technologies, Incorporated deklareerib, et iX125R1 vastavust phinuetele ja teistele asjakohastele direktiivi 1999/5/E stteid. Spanish Por la presente, Xplore Technologies, Incorporated declara que el iX125R1 cumple con los requisitos esenciales y otras disposiciones pertinentes de la Directiva 1999/5/CE. Greek Xplore Technologies Incorporated iX125R1 1999/5/. Italian Con la presente, Xplore Technologies, Incorporated dichiara che il iX125R1 conforme ai requisiti essenziali ed alle altre disposizioni pertinenti della direttiva 1999/5/CE. Per uso riservato, un'autorizzazione generale richiesta se WAS/RLAN sono usati fuori dei propri locali. Per uso pubblico, un'autorizzazione generale richiesta. Latvian Ar o, Xplore Technologies, Incorporated pazino, ka iX125R1 ir saskana ar pamatprasibam un citiem attiecigiem Direktivas 1999/5/EK. Lithuanian Nusprendzia, Xplore Technologies, Incorporated pareikia, kad iX125R1 atitinka esminius reikalavimus ir kitas atitinkamas nuostatas del Direktyvoje 1999/5/EB. Netherlands Hierbij Xplore Technologies, Incorporated verklaart dat het iX125R1 in overeenstemming is met de essentile eisen en andere relevante bepalingen van richtlijn 1999/5/EG. Maltese Hawnhekk, Xplore Technologies, Incorporated jiddikjara li l-iX125R1 hija f'konformit mar-rekwiziti essenzjali u dispozizzjonijiet rilevanti ohra tad-Direttiva 1999/5/KE. Hungarian Ezton, Xplore Technologies, Incorporated kijelenti, hogy a iX125R1 megfelel az alapveto kvetelmnyeknek s ms vonatkoz 1999/5/EK irnyelv rendelkezseit. 25 Polish Niniejszym Xplore Technologies, Incorporated oswiadcza, ze iX125R1 jest zgodny z zasadniczymi wymaganiami oraz pozostalymi stosownymi postanowieniami Dyrektywy 1999/5/WE. Portuguese Nisto, Xplore Technologies, Incorporated declara que o iX125R1 est em conformidade com os requisitos essenciais e outras disposies relevantes da Directiva 1999/5/CE. Slovenian S tem, Xplore Technologies, Incorporated izjavlja, da iX125R1 skladen z bistvenimi zahtevami in ostalimi relevantnimi dolocili direktive 1999/5/ES. Slovak Tmto, Xplore Technologies, Incorporated vyhlasuje, ze iX125R1 je v zhode so zkladnmi poziadavkami a dalmi prslunmi ustanoveniami smernice 1999/5/ES. Finnish Tten, Xplore Technologies, Incorporated vakuuttaa, ett iX125R1 on noudattaa olennaisten vaatimusten ja muiden direktiivin 1999/5/EY. Swedish Hrmed Xplore Technologies, Incorporated frklarar att iX125R1 str i verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser i direktiv 1999/5/EG. Icelandic Hr me, Xplore Technologies, Incorporated segir a iX125R1 er samrmi vi nausynleg skilyri og nnur kvi tilskipunar 1999/5/EB. Norwegian Herved Xplore Technologies, Incorporated erklrer at iX125R1 er i samsvar med de grunnleggende krav og vrige relevante krav i direktiv 1999/5/EF. Wireless notices In some environments, the use of wireless devices (both internal and external) may be restricted. Such restrictions may apply aboard airplanes, in hospitals, near explosives, in hazardous locations, etc. If you are uncertain of the policy that applies to the use of this device, please ask for authorization to use it prior to turning it on. For instructions for disabling internal wireless devices, see Page16. Australia/New Zealand (C-Tick) statements All Xplore Tablet PCs and Xplore Tablet PC systems comply with the Australia/New Zealand Regulatory Authorities. Embedded in your Tablet PC may be one or more radio-type devices such as the display digitizer that operates in the 525600 KHz band, a Wi-Fi device that operates in the 2.4 or 5.4 GHz Band, a Bluetooth device that operates in the 2.4 GHz band, and an optional mobile broadband (WWAN) device that operates in the bands of 850 MHz, 1900 MHz, and 2100 MHz. All radio-type devices embedded in your Tablet PC comply with standards:

EN60950-1 (IEC60950-1:2006+A11:2009) Safety of Information Technology Equipment. 26 AS/NZS 2064 Class B (EN55011/CISPR11) Limits and Methods of Measurement of Radio Interference characteristics of Industrial Scientific, and Medical (ISM) Radio Frequency Equipment. AS/NZS 3548 Class B (EN55022/CISPR22) Limits and Methods of Measurement of Radio Interference. characteristics of Information Technology Equipment AS/NZS 4251.2 (EN55024/CISPR24) Limits and Methods of Measurement of Immunity characteristics of Information Technology Equipment. AS/NZS 4268 (EN300-328-2) Electromagnetic Compatibility and Radio Spectrum Matters

(ERM). Internal Bluetooth Module Notice Class B Statement Class B Equipment: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to the ACMA rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer's instruction manual, may cause interference with radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference with one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment to an outlet on a circuit different from that to which the receiver is Increase the separation between the equipment and the receiver. connected. Consult the dealer or an experienced radio/television technician for help. This device complies with all the essential ACMA rules for Information Technology Equipment. Operation is subject to the following two conditions:

This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. Australia/New Zealand (A-Tick) statement A wireless 3G/4G mobile broadband (WWAN) communication device may be included in your Tablet PC. The 3G/4G device has been tested and is compliant with the Australian A-Tick standards. Xplore Technologies ACMA Supplier Code is N15820. The device is compliant with the following standards:

GSM/EDGE AS/ACIF S042.1 Requirements for connection to an air interface of a Telecommunications Network Part 1. General. GSM/EDGE AS/ACIF S042.3 Requirements for connection to an air interface of a Telecommunications Network Part 3. GSM. WCDMA/HSDPA AS/ACIF S042.1 Requirements for connection to an air interface of a Telecommunications Network Part 1. General. 27 WCDMA/HSDPA AS/ACIF S042.3 Requirements for connection to an air interface of a Telecommunications Network Part 3. GSM. Radio Frequency Wireless Communication Devices Embedded in the Tablet PC are various Radio Frequency (RF) wireless communication devices. The Tablet PC may contain one or more radio-type devices that operate in the following bands:

525600 KHz band 13.57 MHz (SlateMate RFID) 832862 MHz band 880915 MHz band 17101785 MHz band 19201980 MHz band 25002570 MHz 24002496 MHz band 51505850 MHz band All radio-type devices embedded in the Tablet PC have met all the qualifications for use under COFETEL regulations and guidelines. NOM/NYCE statement All Xplore Tablet PC and Xplore Tablet PC systems meet the safety and technical standards set by the Normalizacion Y Certificacion Electronica A. C. (NYCE) / Comision Federal de Telecomunicaciones

(COFETEL) regulating bodies and can be safely operated.The Tablet PC meets the following technical standards:

NOM-001-SCFI-1993 NOM-019-SCFI-1998 NOM-EM-151-SCTI Internal Bluetooth Module Notice Class B Statement Class B Equipment: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to the NOM/COFETEL rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer's instruction manual, may cause interference with radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference with one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment to an outlet on a circuit different from that to which the receiver is Increase the separation between the equipment and the receiver. connected. Consult the dealer or an experienced radio/television technician for help. 28 This device complies with all the essential NOM/COFETEL rules for Information Technology Equipment. Operation is subject to the following two conditions:

This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. Radio Frequency Wireless Communication Devices Embedded in the Tablet PC are various Radio Frequency (RF) wireless communication devices. The Tablet PC may contain one or more radio-type devices that operate in the following bands:

525600 KHz band 13.57 MHz (SlateMate RFID) 832862 MHz band 880915 MHz band 17101785 MHz band 19201980 MHz band 25002570 MHz 24002496 MHz band 51505850 MHz band All radio-type devices embedded in the Tablet PC have met all the qualifications for use under COFETEL regulations and guidelines. IRAM statement All Xplore Tablet PC and Tablet PC systems meet the safety and technical standards set by the Instituto Argentino de Normalizacion y Certificacion (IRAM) and the Comision Nacional De Comunicaciones

(CNC) regulating body and can be safely operated and connected to the wireless network. The Tablet PC meets the following technical standards:

Resolution 92/98 Resolution 197/2004 Resolution 799/99 CNT-Q2-60.11 CNC-Q260.14 V03 Internal Bluetooth notice Class B Equipment: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to the IRAM/CNC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer's instruction manual, may cause interference with radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference with one or more of the following measures:

29 Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is Increase the separation between the equipment and the receiver. connected. Consult the dealer or an experienced radio/television technician for help. This device complies with all the essential IRAM / CNC rules for Information Technology Equipment. Operation is subject to the following two conditions:

This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. Radio Frequency Wireless Communication Devices Embedded in the Tablet PC are various Radio Frequency (RF) wireless communication devices. The Tablet PC may contain one or more radio-type devices that operate in the following bands:

525600 KHz band 13.57 MHz (SlateMate RFID) 832862 MHz band 880915 MHz band 17101785 MHz band 19201980 MHz band 25002570 MHz 24002496 MHz band 51505850 MHz band All radio-type devices embedded in the Tablet PC have met all the qualifications for use under IRAM/CNC regulations and guidelines. ANATEL statement All Xplore Tablet PC and Tablet PC systems meet the safety and technical standards set by the Agncia Nacional de Telecomunicaes (ANATEL) regulating body and can be safely operated. The Xplore Tablet PC Model iX125R1 is listed as a Category II product according to ANATEL standards for Information Technology Equipment. The Xplore Tablet PC Model iX125R1 meets the following RF Technical standards:

Internal Bluetooth Class B notice Class B Equipment: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to the Agncia Nacional de Telecomunicaes (ANATEL) rules. These limits are 30 Resolution No. 303 Resolution No. 442 Resolution No. 454 Resolution No. 506 Resolution No. 529 Resolution No. 533 designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer's instruction manual, may cause interference with radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference with one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment to an outlet on a circuit different from that to which the receiver is Increase the separation between the equipment and the receiver. connected. Consult the dealer or an experienced radio/television technician for help. This device complies with all the essential Agncia Nacional de Telecomunicaes (ANATEL) rules for Information Technology Equipment. Operation is subject to the following two conditions:

This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. Radio Frequency Wireless Communication Devices Embedded in the Tablet PC are Radio Frequency (RF) wireless communication devices. The Xplore Tablet PC Model iX125R1 operates in one or more radio-type frequency bands:

525600 KHz band 13.57 MHz (SlateMate RFID) 832862 MHz band 880915 MHz band 19202170 MHz band 25002690 MHz 24002496 MHz band 51505850 MHz band All radio-type devices embedded in the Tablet PC have met all the qualifications for use under the Agncia Nacional de Telecomunicaes (ANATEL) regulations and guidelines. Battery notice Xplore Technologies sealed lithium ion batteries comply with all applicable shipping regulations as prescribed by industry and legal standards. This includes compliance with the UN Recommendations on the Transport of Dangerous Goods; IATA (International Air Transport Agency) Dangerous Goods Regulations, 44th Edition, 2003, Special Provisions A45, and applicable U.S. DOT regulations for the safe transport of lithium ion batteries. Each Xplore Technologies cell or battery has been tested under provisions of the UN Manual of Tests and Criteria, Part III, Sub-section 38.3. Complies with Battery Directive 2006/66/EC. 31 Trademarks Xplore Technologies, Inc. has made every effort to identify trademarked properties and owners on this page. All brands and product names used in this document are for identification purposes only and may be trademarks or registered trademarks of their respective companies. Gobi5000 is a trademark of Qualcomm Incorporated. Xplore, Xplore Technologies, Speak Anywhere, and View Anywhere are trademarks or registered trademarks of Xplore Technologies, Inc. in the USA and other countries. Mayo Clinic and MayoClinic.com are trademarks of Mayo Foundation for Medical Education and Research. This product incorporates copy protection technology that is protected by U.S. and foreign patents, including patent numbers 5,315,448 and 6,836,549, and other intellectual property rights. The use of Macrovision copy protection technology in the product must be authorized by Macrovision. Reverse engineering or disassembly is prohibited. The Xplore Technologies products and services may be covered by one or more patent-protected inventions. Additional patents may also be pending. For more information, see Patents. Limited Warranty This Limited Warranty applies to the Xplore-branded hardware products sold by or leased from Xplore Technologies, Inc., its worldwide subsidiaries, affiliates, authorized resellers, or country distributors

(collectively referred to in this Limited Warranty as Xplore) with this Limited Warranty (Xplore Product). These terms and conditions constitute the complete and exclusive warranty agreement between you and Xplore regarding the Xplore Product you have purchased or leased. These terms and conditions supersede any prior agreements or representations, including representations made in Xplore sales literature or advice given to you by Xplore or an agent or employee of Xplore that may have been made in connection with your purchase or lease of the Xplore Product. No change to the conditions of this Limited Warranty is valid unless it is made in writing and signed by an authorized representative of Xplore. Warranty disclaimer EXCEPT AS EXPRESSLY SET FORTH IN THIS LIMITED WARRANTY AND TO THE GREATEST EXTENT ALLOWED BY LAW, XPLORE MAKES NO OTHER REPRESENTATIONS, WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED REPRESENTATIONS, WARRANTIES, OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-

INFRINGEMENT, AND NON-INTERFERENCE. XPLORE DOES NOT WARRANT THAT YOUR USE OF THE XPLORE PRODUCT WILL BE UNINTERRUPTED OR ERROR-FREE. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED IN DURATION TO THE LIMITED WARRANTY PERIOD, TO THE GREATEST EXTENT ALLOWED BY LAW. SOME STATES OR COUNTRIES DO NOT ALLOW A LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS. IN SUCH STATES 32 OR COUNTRIES, SOME EXCLUSIONS OR LIMITATIONS OF THIS LIMITED WARRANTY MAY NOT APPLY TO YOU. Warranty period Customer satisfaction is of the utmost importance to Xplore Technologies. Each Xplore Tablet PC ships with a one-year limited warranty that covers the Tablet PC, hard drive, memory, and select accessories. Two-year and three-year standard limited warranties are available and cover only the Tablet PC, hard drive, and memory. The tablet batteries, located on the back of the tablet, are covered by the same warranty period as the tablet warranty (one-year limited warranty) and are considered functioning batteries when the following conditions exist: the battery powers the tablet; the battery is able to charge and discharge;

the battery does not have visible defects. Defects caused by dropping the tablet or by other impacts, or leaving the product in extreme environments are not covered by the warranty. The warranty period for this Xplore Product is one (1) year from the date of product purchase or longer if you have purchased an extended warranty. The Limited Warranty Period starts on the date of purchase or lease from Xplore. Your dated sales or delivery receipt, showing the date of purchase or lease of the product, is your proof of the purchase or lease date. You may be required to provide proof of purchase or lease as a condition of receiving warranty service. Warranty coverage Xplore warrants that the Xplore Product and all the internal components of the product that you have purchased or leased from Xplore are free from defects in materials or workmanship under normal use during the Limited Warranty Period. You are entitled to warranty service according to the terms and conditions of this document if a repair to your Xplore Product is required within the Limited Warranty Period. This Limited Warranty extends only to the original purchaser or lessee of this Xplore Product and is not transferable to anyone who obtains ownership or use of the Xplore Product from the original purchaser or lessee Repair or replacement Xplore products are manufactured using new materials or new and used materials equivalent to new in performance and reliability. Spare parts may be new or equivalent to new. Spare parts are warranted to be free from defects in material or workmanship for thirty (30) days or for the remainder of the Limited Warranty Period of the Xplore Product in which they are installed, whichever is longer. During the Limited Warranty Period, Xplore will repair or replace the defective component parts or the Xplore Product. All component parts or hardware products removed under this Limited Warranty become the property of Xplore. The replacement part or product takes on either the Limited Warranty status of the removed part or product or the thirty (30) day limited warranty of the spare part. In the unlikely event that your Xplore Product has a recurring failure, Xplore, at its discretion, may elect to provide you with a replacement unit of Xplore's choosing that is at least equivalent to your Xplore Product in hardware performance. Xplore reserves the right to elect, at its sole discretion, to give you a 33 refund of your purchase price or lease payments (less interest) instead of a replacement. THIS IS YOUR EXCLUSIVE REMEDY FOR DEFECTIVE PRODUCTS. HOWEVER YOU MAY ALSO HAVE OTHER RIGHTS THAT MAY VARY FROM STATE TO STATE OR FROM COUNTRY TO COUNTRY. Software and data YOU SHOULD MAKE PERIODIC BACKUP COPIES OF THE DATA STORED ON YOUR HARD DRIVE OR OTHER STORAGE DEVICES AS A PRECAUTION AGAINST POSSIBLE FAILURES, ALTERATION, OR LOSS OF THE DATA. BEFORE RETURNING ANY UNIT FOR SERVICE, BE SURE TO BACK UP DATA AND REMOVE ANY CONFIDENTIAL, PROPRIETARY, OR PERSONAL INFORMATION. XPLORE IS NOT RESPONSIBLE FOR DAMAGE TO, LOSS OF, OR DISCLOSURE OF ANY PROGRAMS, DATA, OR REMOVABLE STORAGE MEDIA. XPLORE IS NOT RESPONSIBLE FOR THE RESTORATION OR REINSTALLATION OF ANY PROGRAMS OR DATA OTHER THAN SOFTWARE INSTALLED BY XPLORE WHEN THE PRODUCT IS MANUFACTURED. XPLORE DOES NOT WARRANT SOFTWARE PRODUCTS, INCLUDING ANY SOFTWARE PRODUCTS OR THE OPERATING SYSTEM PREINSTALLED BY Xplore. Xplore's only obligations with respect to software distributed by Xplore under the Xplore brand name are set forth in the applicable end-user license or program license agreement. Non-Xplore hardware and software products are provided AS IS. However, non-Xplore manufacturers, suppliers, or publishers may provide their own warranties directly to you. Warranty exclusions This Limited Warranty does not extend to:

a) Expendable parts;

b) Any product from which the serial number has been removed or altered;

c) Cosmetic damage or ordinary wear and tear;

d) Damage or non-functionality that results from (i) failure to follow the instructions that came with the product; (ii) accident, misuse, abuse, or other external causes; (iii) operation outside the usage parameters stated in the then-current user documentation for the product; or (iv) use of parts not manufactured or sold by Xplore; or e) Damage or non-functionality due to modifications or service by anyone other than (i) Xplore, (ii) a Xplore authorized service provider, or (iii) your own installation of end-user replaceable Xplore or Xplore-approved parts. Limitation of liability IF YOUR XPLORE PRODUCT FAILS TO WORK AS WARRANTED ABOVE, YOUR SOLE AND EXCLUSIVE REMEDY SHALL BE REPAIR OR REPLACEMENT. XPLORE'S MAXIMUM LIABILITY UNDER THIS LIMITED WARRANTY OR RELATED IN ANY WAY TO THE XPLORE PRODUCT IS EXPRESSLY LIMITED TO THE LESSER OF THE PRICE YOU HAVE PAID FOR THE PRODUCT OR THE COST OF REPAIR OR REPLACEMENT OF ANY HARDWARE COMPONENTS THAT MALFUNCTION IN CONDITIONS OF NORMAL USE. 34 XPLORE SHALL NOT BE LIABLE FOR ANY DAMAGES CAUSED BY THE PRODUCT OR THE FAILURE OF THE PRODUCT TO PERFORM, INCLUDING ANY LOST PROFITS OR SAVINGS OR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. XPLORE SHALL NOT BE LIABLE FOR ANY CLAIM MADE BY A THIRD PARTY OR MADE BY YOU FOR A THIRD PARTY. THIS LIMITATION OF LIABILITY APPLIES WHETHER DAMAGES ARE SOUGHT, OR A CLAIM MADE, UNDER THIS LIMITED WARRANTY OR AS A TORT CLAIM (INCLUDING NEGLIGENCE AND STRICT PRODUCT LIABILITY), A CONTRACT CLAIM, OR ANY OTHER CLAIM. THIS LIMITATION OF LIABILITY CANNOT BE WAIVED OR AMENDED BY ANY PERSON. THIS LIMITATION OF LIABILITY WILL BE EFFECTIVE EVEN IF XPLORE KNEW OR SHOULD HAVE KNOWN OF THE POSSIBILITY OF ANY SUCH DAMAGES. THIS LIMITATION OF LIABILITY, HOWEVER, WILL NOT APPLY TO CLAIMS FOR PERSONAL INJURY. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS THAT MAY VARY FROM STATE TO STATE OR FROM COUNTRY TO COUNTRY. YOU ARE ADVISED TO CONSULT APPLICABLE STATE OR COUNTRY LAWS FOR A FULL DETERMINATION OF YOUR RIGHTS. Software technical support Software technical support is defined as assistance with questions and issues about the software that was either preinstalled by Xplore on the Xplore Product or that was included with the Xplore branded product at the time of your purchase or lease of the product. Technical support for software is available for the duration of your warranty period. Your dated sales or delivery receipt, showing the date of purchase or lease of the product, is your proof of the purchase or lease date. You may be required to provide proof of purchase or lease as a condition of receiving software technical support. After the first ninety (90) days, technical support for software that was either preinstalled by Xplore on the Xplore Product or included with the Xplore Product at the time of your purchase or lease of the product is available for a fee. Warranty transfer to another country Xplore is not responsible for any handling fees, tariffs, or import duties that may be incurred in transferring the Products. Products and software may be covered by export controls issued by the United States or other governments. Australia The Australian Competition and Consumer Act (2010) (including the Australian Consumer Law) as well as other laws in Australia (Mandatory Laws) guarantee certain conditions, warranties and undertakings, and give you other legal rights, in relation to the quality and fitness for purpose of Xplore Technologies consumer products sold in Australia. In Australia, our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. What constitutes a major failure is set out in the Australian Consumer Law. 35 Nothing in this Warranty purports to modify or exclude the conditions, warranties and undertakings, and other legal rights, under the Australian Consumer Law, and other laws. This Warranty gives you additional protection for your Xplore consumer product, and identifies a preferred approach to resolving warranty claims which will be quickest and simplest for all parties, subject to the exclusions terms and conditions below. This Limited Warranty applies to the Xplore-branded hardware products sold by or leased from Xplore Computing, Inc., its worldwide subsidiaries, affiliates, authorized resellers, or country distributors in Australia with this Limited Warranty (Xplore Product). This Limited Warranty is provided by Xplore Technologies, Inc. (Xplore) of 8601 RR 2222, Building 2, Austin, Texas 78728, USA (Phone: 1-866-322-

9783 option 9). These terms and conditions constitute the complete and exclusive Limited Warranty agreement between you and Xplore regarding the Xplore Product you have purchased or leased. No change to the conditions of this Limited Warranty is valid unless it is made in writing and signed by an authorized representative of Xplore. Warranty period The period during which this Warranty is in effect will depend upon the Xplore Product to which it relates. In all cases the commencement date for the period is the actual day of purchase, as reflected on the authorized resellers or distributors invoice / receipt provided to you. The period during which each Xplore Product is the subject of this Warranty is identified in the table below (Limited Warranty Period). Xplore CL-Series Tablet PCs Other Xplore Tablet PCs (XSLATE R12-Series, F5-Series, and C5-Series) Xplore C5/F5-Series and CL-Series Mobile Docks with Key lock and Xplore XSLATE R12-

Series Secure Mobile Dock Tilt and Rotate Mount Vehicle Mounting Kit (Including Tilt & Rotate Mount and Vehicle Dashboard Bracket) Wall Mount Bracket XSLATE R12-Series Companion Keyboard Docking Stations (all other) Rugged Digitizer Pen Protective Carrying Cases and Portfolios Additional Batteries Additional Digitizer Pens Keyboards (USB and Bluetooth) C5/F5-Series EasyConnect Adapter Products Auto/Air Adapters Single- and Multi-bay Battery Chargers 36 1 year 3 years 3 years 3 years 3 years 3 years 1 year 1 year 1 year 90 days 1 year 90 days 90 days 90 days 1 year 1 year AC Power Packs Protective Display Film (all products) 90 days 30 days Warranty coverage Xplore warrants that the Xplore Product and all the internal components of the Xplore Product are of acceptable quality and free from defects in materials or workmanship under normal use during the Limited Warranty Period. If you consider that the Xplore Product which you have purchased is not of acceptable quality, has a defect, or is otherwise not compliant with the conditions, warranties, undertakings, and legal rights given to you under Australian Law (for example, it appears faulty, or does not work at all or properly), you can make a claim under this Warranty. To the extent permitted by the Mandatory Laws, this Limited Warranty extends only to the original purchaser or lessee of this Xplore Product and is not transferable to anyone who obtains ownership or use of the Xplore Product from the original purchaser or lessee. Repair or replacement If, following receipt of a claim under this Warranty, Xplore or its agent determine that your claim in respect of a Xplore Product is valid (having regard to the terms of this Warranty), and:

a) if the goods can be repaired and the failure to comply with the warranty is not a major failure, Xplore or its agent may either repair the Xplore Product, or pay you for the cost of a repair of the Xplore Product, or replace the Xplore Product with the same or similar product, or provide you with a refund for the Xplore Product, depending upon what is reasonable in the circumstances and at no cost to you. Goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods; or. b) if the goods cannot be repaired or the failure to comply with the Warranty is a major failure, (i) you may reject the goods and by so doing elect to receive either a refund for the Xplore Product or a replacement of the Xplore Product with the same or similar product or (ii) by action against Xplore, require Xplore to pay you compensation for any reduction in the value of the goods or lease payments (less interest) below the price paid or payable by you for the goods If Xplore provides you with either a replacement or refund or if you reject the goods, you immediately transfer ownership in the original Xplore Product or part to Xplore. Any such resolution by Xplore of a claim under this Warranty by you does not otherwise detract from any other statutory rights which you might have in the circumstances, including your right to monetary compensation for a valid claim. If, following receipt of a claim under this Warranty, Xplore or its agent determine that your claim in respect of a Xplore Product is invalid, Xplore my charge you for any labor, parts or transport costs incurred by Xplore or its agent in assessing your claim. Software and data YOU SHOULD MAKE PERIODIC BACKUP COPIES OF THE DATA STORED ON YOUR HARD DRIVE OR OTHER STORAGE DEVICES AS A PRECAUTION AGAINST POSSIBLE FAILURES, ALTERATION, OR LOSS OF THE DATA. BEFORE RETURNING ANY UNIT FOR SERVICE, BE SURE TO BACK UP DATA AND REMOVE ANY CONFIDENTIAL, PROPRIETARY, OR PERSONAL INFORMATION. THIS LIMITED WARRANTY DOES NOT EXTEND TO DAMAGE TO, LOSS OF, OR DISCLOSURE OF ANY PROGRAMS, 37 DATA, OR REMOVABLE STORAGE MEDIA, OR THE RESTORATION OR REINSTALLATION OF ANY PROGRAMS OR DATA OTHER THAN SOFTWARE INSTALLED BY XPLORE WHEN THE PRODUCT IS MANUFACTURED. Warranty exclusions This section identifies what is excluded under this Warranty. For the avoidance of any doubt, any and all warranties or conditions which are not guaranteed under Mandatory Laws and which are not expressly included in this Warranty as additional warranties or conditions are excluded. This Warranty does not warrant uninterrupted or error-free operation of the Xplore Product, which is affected by system configuration, software, applications your data and operator control of the system, among other factors. Though the Xplore Product is considered to be compatible with many systems, it is your responsibility to determine compatibility and integration with other products or systems. This Warranty does not apply to non-Xplore hardware products or non-Xplore software products which are not incorporated into Xplore Products or, in the case of software, pre-loaded onto the Xplore Product at the time of sale, even if packaged or sold with Xplore hardware. This warranty does not cover:

any Xplore Product from which the serial number has been removed or altered;

normal wear and tear, natural performance degradation (e.g. reduced battery life), or service costs in replacing and maintaining expendable/ consumable parts which have ceased working through normal wear and tear;

cosmetic damage such as to the exterior finish;

minor imperfections within design specification that do not materially alter functionality;

damage or non-functionality that results from (i) failure to follow the instructions that came with the product; (ii) accident, misuse, abuse, or other external causes; (iii) operation outside the usage parameters stated in the then current user documentation for the product; or (iv) use of parts not manufactured or sold by Xplore damage or non-functionality due to modifications or service by anyone other than (i) Xplore, (ii) a Xplore authorized service provider, or (iii) your own installation of end-user replaceable Xplore or Xplore-approved parts; or loss caused by fire, water (liquid spillage or ingression), theft, vermin or insect infestation. Limitation of liability Except as otherwise provided in this Warranty, if Xplore becomes liable to you under this Warranty or pursuant to any Mandatory Laws, that liability is limited to the maximum extent permitted by law, including without limitation, s 64A of Schedule 2 of the Australian Consumer Law. To the extent that Xplore is legally entitled to avail itself of such limitation, Xplores liability is limited to, at the election of Xplore in its absolute discretion, either:

a) in the case of goods:

i) ii) the payment of the cost of replacing the goods; and the replacement of the goods;

b) in the case of services:

i) the supplying of the services again;

38 ii) the payment of the cost of having the services supplied again. Software Technical Support Software technical support is defined as assistance with questions and issues about the software that was either preinstalled by Xplore on the Xplore Product or that was included with the Xplore branded product at the time of your purchase or lease of the product. Technical support for software is available under this Limited Warranty for the duration of your warranty period. Your dated sales or delivery receipt, showing the date of purchase or lease of the product, is your proof of the purchase or lease date. You may be required to provide proof of purchase or lease as a condition of receiving software technical support. After the first ninety (90) days, technical support for software that was either preinstalled by Xplore on the Xplore Product or included with the Xplore Product at the time of your purchase or lease of the product is available for a fee. What you need to do to be entitled to claim under this Limited Warranty:

1. Provide proof or purchase or lease. (Your dated sales or delivery receipt, showing the date of purchase or lease of the product, is your proof of the purchase or lease date.) 2. Be the original purchaser or lessee of this Xplore Product. 3. Submit your claim to your local distributor or reseller without undue delay after detection of the defect and in any event within the Limited Warranty Period. Cabling and power cord precautions. How to make a claim under this Limited Warranty:

1. Contact your local distributor or reseller and provide your contact information, such as phone number, email address and other information (such as serial number or fault description). You may also contact Xplore directly at www.xploretech.com/support. If Xplore determines that you have a valid claim under this Limited Warranty, Xplore or its authorized representatives will repair, replace or refund the Xplore Product at Xplores sole discretion and in accordance with this Limited Warranty. 2. 3. Except as set out in this Warranty, Xplore will bear the expense of a valid claim under brought under this Warranty. If you wish to claim expenses under this Limited Warranty, contact your local distributor or reseller. The information in this publication is subject to change without notice. Xplore Technologies, INC. SHALL NOT BE HELD LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN NOR FOR ACCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL. 39 Model iX125R1 PN024-02-0xxx-A01 Revision Date: June 2017 40

Label Location The XSLATE R12 SlateMate (RPM001 and RPM002) are permanently attached to the Tablet at the Factory or qualified Service Center. The label is located in the battery bay and is visible when end users installed the battery. The Back of Tablet Battery Bay ETU Label Location

Nh. ZEBRA R12 SlateMate HF RFID/Serial Model: RPMO02 FCC ID: UZ7RPMO01 109AN-RPMOO1 CE LBL P/N : 030-05-0292-A00 Xt. ZEBRA R12 SlateMate BCS/HF RFID/Serial Model: RPMO01 FCCID: UZ7RPMO01 109AN-RPMOO1 CE LBL P/N : 030-05-0291-A00

Regulatory Engineering Date: October 21, 2020 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: FCC ID: UZ7RPM001 AUTHORIZATION LETTER We, the undersigned, hereby authorize Jones Tsai in Sporton International Inc. to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Jones Tsai in Sporton International Inc. on our behalf shall have the same effect as acts of our own. If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Confidentiality Request Pursuant to the provisions of Sections 0.457 and 0.459 of Commissions rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. Block Diagram Part List Operational Description Schematic Diagram Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission s policy, in order to comply with the marketing regulations in 47 CFT 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. External Photos Internal Photos Test Setup Photos Zebra Technologies Corporation 1 Z e b r a P l a z a , | H o l t s v i l l e , N Y 1 1 7 4 2 | 1 . 6 3 1 . 7 3 8 . 2 4 0 0 p h o n e | 1 . 6 3 1 . 6 2 7 . 7 1 7 9 f a x | w w w . z e b r a . c o m Regulatory Engineering User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Label Location Attestation This device (Model: RPM001, RPM002) is permanently attached to the Tablet at the factory or qualified service center. The label is included in the battery bay of the Tablet. Sincerely, Signature

_______________________________ Name and Job Title. E-mail Tel.

: Larry (Qianlin) Zhou / Regulatory Specialist

: larry.zhou@zebra.com

: 346-260-3543 Zebra Technologies Corporation 1 Z e b r a P l a z a , | H o l t s v i l l e , N Y 1 1 7 4 2 | 1 . 6 3 1 . 7 3 8 . 2 4 0 0 p h o n e | 1 . 6 3 1 . 6 2 7 . 7 1 7 9 f a x | w w w . z e b r a . c o m