FCC ID: 2ADM5-HP-0733 BT ANC TRAVEL HP W/ CASE

HP-0733 ANC Wireless Headphones IM 26 OCT 2023 Table of Contents 1. Introduction 2. Packaging Contents 4. How to use A C T I V E N O I S E C A N C E L I N G W I R E L E S S H E A D P H O N E S B U I L T - I N 3 . 7 V L I - I O N B A T T E R Y INSTRUCTION MANUAL 1 Introduction 1 2 Packaging Contents 2 3 Connection Diagram 2 4 How To Use 4.1 General Function 4.2 Pairing To Mobile Phone 4.3 AUX Input 4.4 Charging Your Product 5 Product Specification 6 FAQ 7 FCC Statement Battery Statement 3 3 4 4 5 6 6 7 8 4.2. Pairing to Mobile phone or other device To use your Bluetooth headphones, you must first pair your headphones with a mobile phone or other Bluetooth device. Once your Bluetooth headphones is paired to a specific mobile phone, they will remain paired and automatically recognize each other whenever they are within range. 4.4. Charging your headphones For your safety, please always use an appropriate 5V input charger/Adapter to charge the product. DO NOT USE Quick Charging USB Adapter to charge the product, as it might damage the product. Turn on your phone and ensure the Bluetooth function is activated. Turn on the headphones, enter the pairing mode. Search your Bluetooth devices on your phone by following the phones instructions. Refer to your phones user manual for more information. After a few seconds the phone will list the HP-0733-ANC as a discover device. Select it and follow your phones instructions to select this pairing. Your phone will confirm the pairing, and then press Yes/OK. 4.3. AUX Input To use your Bluetooth headphones with an audio device which has a 3.5mm audio output connector, please use the included 3.5mm AUX cable. One end plug into the Bluetooth headphones AUX input, another end plug into the audio devices 3.5mm audio output connector. Note: In AUX mode, all the buttons and ANC function will be disabled. Use the USB Type-C Charging cable accessory provided with this headphones. Connect the USB Type-C plug to the USB Type-C charging port on the headphones positioned at in headphones diagram on page 2. Connect the USB plug to a USB port on a computer or wall adapter to activate charging. 1

**Make sure to keep the headphones charging for a minimum of 2 hours before initial use. 6. FAQ USB Plug USB Type-C Plug Warning:

You must select a qualified charger from a regular manufacturer. You must charge the Bluetooth headphones if it has not been used for more than 6 months. 1. Why is there no power even when the headphones is turned on ?

Ans: Ensure the battery has been charged up to 2 hour for initial use. 2. There is no sound when playback. Ans: Check the connection between headphones with phone or computer, if the connection is not established, please connect again. Make sure the headphones is paired and connected with your target phone or other master device. Congratulations, and thank you for choosing the Active Noise Canceling Wireless Headphones. This manual will help you operate the Active Noise Canceling Wireless Headphones, but firstly you should familiarize yourself with the Bluetooth functionality of your mobile phone or other devices before using the Active Noise Canceling Wireless Headphones. Please follow the rules depicted in this manual closely to ensure your safety. Before using this Bluetooth headphones, we would strongly encourage you to read through this user manual. Be more wary of any edges, uneven surfaces, metal parts, accessories and its packaging so as to prevent any possible injury or damage. Do not modify, repair or dismantle this Bluetooth headphones. Doing so may result in fires, electric shocks, complete breakdown of this Bluetooth headphones, etc. All are not covered under warranty. Do not use an diluent or volatile liquid to clean the Bluetooth headphones. Do not use the Bluetooth headphones in a hazardous location. 5. Product Specification Driver Diameter: 40 mm x 2 Impedance: 32 Ohms Frequency Response: 20 Hz - 20 KHz Sensitivity: 100 dB +/- 3 dB ANC: -18 dB +/- 3 dB Power Supply: Li-ion Battery 3.7V 300 mAh Playing Time:

6 - 8 Hours (BT+ANC) 8 - 10 Hours (BT) Charging Time: 2 Hours Bluetooth Range: 32.8 Feet Bluetooth Version: 5.3 USB Type-C Charging Cable Included 1 X 3.5mm AUX Cable 1 X USB Type-C Charging Cable 1 X Active Noise Canceling Wireless Headphones 1 X Instruction Manual 3. Connection Diagram Active Noise Canceling On / Off Button Next / Volume Up MFB (Power / Answer /

End Call / Play / Pause) Prev / Volume Down L E D I n d i c a t o r M i c r o p h o n e A U X I n p u t USB Type-C Charging port 1 Turn on &

Enter the pairing mode Press and hold the MFB for 3 seconds. After turning on, the LED indicator flashes red/blue. Pairing Use a mobile phone with Bluetooth function or other Bluetooth devices to perform necessary pairing action. After pairing, the LED indicator slowly blinks with blue. Turn off Press and hold the MFB for 3 seconds. Charging Answering a Call Plug the USB Type-C to the USB Type-C port. When charging, the LED indicator turns red. After full charging, the LED indicator turns off. Press MFB to answer phone call, press MFB again to end call. Press and hold 2 seconds to reject call. Double click to redial last call. Play / Pause Music Press MFB to play music and press it again to pause music. Volume Up/Down Short Press the Volume Up/Down buttons. Previous/Next Track Short Press the Prev/Next buttons. Active Noise Canceling On / Off Press the On/Off button once to activate or deactivate the ANC function. When ANC is On, the LED indicator turns Green. 7. FCC Statement FCC STATEMENT Safety instructions for the lithium battery and charging the product

-The input voltage to the product is 5V 1A. 1. This device complies with Part 15 of the FCC Rules. Operation is subject to

-In order to charge the product in safe manner and reliable conditions, please the following two conditions:

only adopt certified appropriate charger/ adapter for charging the product.

(1) This device may not cause harmful interference.

-Only charge the product at ambient temperatures between 10C/ 50F

(2) This device must accept any interference received, including interference and 40C/104F. that may cause undesired operation.

- Do not heat above 70C/158F, e.g. Do not expose to sunlight or throw into 2. Changes or modifications not expressly approved by the party responsible for fire. compliance could void the user's authority to operate the equipment.

-Switch off the product after use. NOTE: This equipment has been tested and found to comply with the limits for

(e.g. Voltage higher than 5V) as this may result in severe injury or loss of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are property, and we cannot control the operating process during the time the designed to provide reasonable protection against harmful interference in a user using this product. residential installation. This equipment generates uses and can radiate radio

-In extreme cases, abuse or misuse of Lithium battery pack can lead to frequency energy and, if not installed and used in accordance with the explosion, heat generation, fire development or smoke development.

-Please note that we wont take any responsibility for any wrong operation instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. RF warning statement:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. USB Type-C Charging Cable rating 5V/1A Max. CAUTION: The USB Type-C charging cable included with this item is intended for use with this product. Only use the included USB Type-C charging cable to charge this product. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by 1616 Holdings, Inc. is under license. Other trademarks and trade names are those of their respective owners. FCC ID: 2ADM5-HP-0733 Distributed by 1616 Holdings, Inc. 701 Market Street, Suite 200 Philadelphia, PA 19106 Made in China Keep all relevant information for future reference

Date: 06 NOV 2023 Product: HP-0733 Batch Print ZEEVA INTERNATIONAL Batch No.: ZE122223 FCC ID: 2ADMS-HP-0733

ee. Approval:

Date:

(Zeeva International Limited) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 12-05-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID2ADM5-HP-0733

[Zeeva International Limited] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely,

(Applicant signature)

(Kevin Tso) Rev 1/26/2023

(Zeeva International Limited) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 12-05-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID2ADM5-HP-0733

[Zeeva International Limited] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Sincerely,

(Applicant signature)

(Kevin Tso) Rev 1/26/2023

Zeeva International Limited Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2ADM5-HP-0733 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Block Diagram Schematics Operational Description File Name Block Diagram Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, We also requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the Grant Date of Equipment Authorizations. Exhibit Type File Name Sincerely, Kevin Tso 2023.12.01 Rev 11/20/07

Zeeva International Limited Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: 2023-12-05 SUBJECT: FCC ID: 2ADM5-HP-0733 To Whom It May Concern:

I, the undersigned, hereby states this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, and will apply the Supplier's Declaration of Conformity procedure to the class B computer peripheral portion of this composite device. I understand the following FCC requirements:

1. Devices subject to the SDoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage: https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm (Select the

"accredited" option to search for FCC recognized accredited test firms.) 2. Pt 2.1077 contains the list of information that must be included in the Supplier's Declaration of Conformity, which must be supplied with each product sold. The SDoC compliance info shall be included in the Users Manual or as a separate sheet. The info must contain the name, address, and phone number of the responsible party, which must be located within the United States. According to 2.909(b), the responsible party is either the Manufacturer or if the product is imported the Importer. Regards, Zeeva International Limited

Kevin Tso

Zeeva International Limited Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date:2023-12-05 SUBJECT: FCC Application for FCC ID: 2ADM5-HP-0733 To Whom It May Concern:

We, the undersigned, hereby authorize Sam Lv. at EMTEK (DONGGUAN) CO., LTD. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by EMTEK (DONGGUAN) CO., LTD.on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Sincerely, Kevin Tso 2023.12.05

Zeeva International Limited Suite 1007B, 10th Floor, Exchange Tower, 33 Wang Chiu Road, Kowloon Bay, Hong Kong, China Date: [2023.12.05]

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID:2ADM5-HP-0733 FRN: 0024102113 US Agent Attestation Statement / Part 2.911(d)(7)

[Zeeva International Limited] certifies, that as of [2023.11.05], we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID:2ADM5-HP-0733

[Zeeva International Limited], accepts to maintain an agent of service of process in the United States for no less than one year after her the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-

related administrative or judicial proeitceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of [Zeeva International Limited] for FCC ID:2ADM5-HP-0733 Designated Agent Information:

Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: Support@FCCUSAgent.com Sincerely, Company: [Zeeva International Limited]

Company Representative: [Kevin Tso]

Signature: [Signature]

Designated Agent: FCC US Agent, LLC Designated Agent Representative: Tim Payne Signature: