Date: 20190708 Product: HP-0363 50 mm Table of contents 1. Introduction 2. Packaging Contents 4. How to use COMPASS WIRELESS HEADPHONES INSTRUCTION MANUAL 1 Introduction 2 Packaging Contents 3 Connection Diagram 4 How To Use 4.1 General Function 4.2 Pairing To Mobile Phone 4.3 Charging Your Product 5 Product Specification 6 FAQ Statement 7 FCC Statement 1 2 2 3 3 4 5 6 6 7 8 86 mm Congratulations, and thank you for choosing the Compass Wireless Headphones. This manual will help you operate the Compass Wireless Headphones, but firstly you should familiarize yourself with the Bluetooth functionality of your mobile phone or other devices before using the Compass Wireless Headphones. 1X Micro USB Cable 1X Compass Wireless Headphones 1X Instruction Manual Please follow the rules depicted in this manual closely to ensure your safety. Before using this Bluetooth headphones, we would strongly encourage you to read through this user manual. Be more wary of any edges, uneven surfaces, metal parts, accessories and its packaging so as to prevent any possible injury or damage. Do not modify, repair or dismantle this Bluetooth headphones. Doing so may result in fires, electric shocks, complete breakdown of this Bluetooth headphone, etc. All are not covered under warranty. Do not use an diluent or volatile liquid to clean the Bluetooth headphones. Do not use the Bluetooth headphones in a hazardous location. On / O Button N O
/
F F O V 5 C D Micro USB Charging port 1 Microphone N O
/
F F O V 5 C D 4.2. Pairing to Mobile phone or other device To use your Bluetooth headphones, you must first pair your headphones with a mobile phone or other Bluetooth device. Once your Bluetooth headphones is paired to a specific mobile phone, they will remain paired and automatically recognize each other whenever they are within range. Turn on your phone and ensure the Bluetooth function is activated. Turn on the headphones, enter the pairing mode. Search your Bluetooth devices on your phone by following the phones instructions. Refer to your phones user manual for more information. After a few seconds the phone will list the COMPASS BT HP as a discover device. Select it and follow your phones instructions to select this pairing. Your phone will confirm the pairing, and then press Yes/Ok. Finally, select to connect with Compass Wireless Headphones from your phone. 4.3. Charging your headphones Use the Micro USB cable accessory provided with this headphones. Connect the Micro USB plug to the Micro USB charging port on the headphones positioned at in headphones diagram on page 2. Connect the USB plug to a USB port on a computer or wall adapter to activate charging.
**Make sure to keep the headphones charging for a minimum of 2 hours before initial use. 1 Product Specification Driver Diameter: 40 mm Impedance: 32 Ohms Frequency Response: 20 Hz - 20 KHz Sensitivity: 108 dB +/- 3 dB Power Supply: Li-ion Battery 3.7V 200 mAh Playing Time: 2 - 3 Hours Charging Time: 2 Hours Bluetooth Range: 32.8 Feet Micro USB Cable Included Safety instructions for the lithium battery and charging the product
-The input voltage to the product is 5V 1A.
-In order to charge the product in safe manner and reliable conditions, please only adopt certified appropriate charger/ adapter for charging the product.
-Only charge the product at ambient temperatures between 10 deg C/ 50 deg F and 40 deg C/104 deg F.
- Do not heat above 70 deg C/158 deg F, eg. Do not expose to sunlight or throw into fire.
-Switch off the product after use.
-Please note that we wont take any responsibility for any wrong operation (eg. Voltage higher than 5V) as this may result in severe injury or loss of property, and we cannot control the operating process during the time the user using this product.
-In extreme cases, abuse or misuse of Lithium battery pack can lead to explosion, heat generation, fire development or smoke development. USB Plug Micro USB Plug headphones is turned 6 initial use. has been charged headphone 6 Check the connection between headphones with phone or computer, if the connection is not established, please connect again. Make sure the headphone is paired and connected with your target phone or other master device. Turn on &
Enter the pairing mode Press and hold the On / Off Button for 3 seconds. After turning on, the LED indicator around the USB socket flashes red/blue. Pairing Use a mobile phone with Bluetooth function or other Bluetooth devices to perform necessary pairing action. After pairing, the LED indicator blinks blue. Turn off Press and hold the On / Off Button for 3 seconds. Charging Plug the Micro USB to the Micro USB port. When charging, the LED indicator turns red. After full charging, the LED indicator turns off. Answering a Call Play / Pause Music Press On / Off button to answer phone call, press On / Off button again to end call. Press On / Off button to play music and press it again to pause music. 7. FCC Statement This device complies with the part 15 of the FCC rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or experienced radio/ TV technician for help. RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. FCC ID: 2ADM5-HP0363 Approval:
Date: