FCC ID: 2ADM5-HP-0556 BT GENERIC KID SAFE HP AST3

BASS JAXX 2 J | WIRELESS AND wiRED IN KID SAFE HEADPHONES INSTRUCTION MANUAL 4.2. Pairing to Mobile phone or other device To use your Bluetooth headphones, you must first pair your headphones with a mobile phone or other Bluetooth device. Once your Bluetooth headphones is paired to a specific mobile phone, they will remain paired and automatically recognize each other whenever they are within range. Pairing to a phone and Entertainment:

Turn on your phone and ensure the Bluetooth function is activated. Turn on the headphones, enter the pairing mode. e Search your Bluetooth devices on your phone by following the phones instructions. Refer to your phones user manual for more information. After a few seconds the phone will list the BT KID HP as a discover device. Select it and follow your phones instructions to select this pairing. e Your phone will confirm the pairing, and then press Yes/OK. Table of Contents 1 Introduction 2 Packaging Contents 3 Connection Diagram 4 How To Use 4.1 General Function 4.2 Pairing To Mobile Phone 4.3 Charging Your Headphones 5 Product Specification 6 FAQ::

7 FCC Statement Battery Statement 4.3. Charging your headphones A For your safety, please always use an appropriate 5V input charger/Adapter to charge the product. DO NOT USE Quick Charging USB Adapter to charge the product, as it might damage the product. Use the Micro USB charging cable accessory provided with this headphones. Connect the Micro USB plug to the Micro USB charging port on the headphones positioned at @ in headphones diagram on page 2. Connect the USB plug to a USB port on a computer or wall adapter to activate charging.

**Make sure to keep the headphones charging for a minimum of 2 hours before initial use. USB Plug Micro USB Plug Warning:

+ You must select a qualified charger from a regular manufacturer.

+ You must charge the Bluetooth headphones if it has not been used for more than 6 months. 1. Introduction Congratulations, and thank you for choosing the 2IN1 Wireless and Wired Kid Safe Headphones. This manual will help you operate the 2IN1 Wireless and Wired Kid Safe Headphones, but firstly you should familiarize yourself with the Bluetooth functionality of your mobile phone or other devices before using the 2IN1 Wireless and Wired Kid Safe Headphones. Safety Rules 1 Please follow the rules depicted in this manual closely to ensure your safety. Before using this Bluetooth headphones, we would strongly encourage you to read through this user manual. Be more wary of any edges, uneven surfaces, metal parts, accessories and its packaging so as to prevent any possible injury or damage. Do not modify, repair or dismantle this Bluetooth headphones. Doing so may result in fires, electric shocks, complete breakdown of this Bluetooth headphones, etc. All are not covered under warranty. Do not use an diluent or volatile liquid to clean the Bluetooth headphones. Do not use the Bluetooth headphones in a hazardous location. 5. Product Specification Driver Diameter: 40 mm Impedance: 32 Ohms Frequency Response: 20 Hz - 20K Hz Sensitivity: 85dB +/- 3 dB Battery Capacity: Li-ion Battery 3.7 V 160 mAh Playtime: 4-5 Hours Charging Time: 2 Hours Bluetooth Range: 32.8 Feet Charging Method: Micro USB Charging Product Dimensions:

6.14 x 6.73 x 2.76 in. (15.6 x 17.1 x 7 cm.) 6. FAQ 1. Why is there no power even when the headphones is tumed on ?

Ans: Ensure the battery has been charged up to 1 hour for initial use. 2. There is no sound when playback. Ans: Check the connection between headphones with phone or computer, if the connection is not established, please connect again. Make sure the headphones is paired and connected with your target phone or other master device. 6 2. Packaging Contents

| | 1X 3.5mm Aux-in Cable ca 1X Micro USB Charging Cable 1 X 2IN1 Wireless and Wired Kid Safe Headphones 1 X Instruction Manual Includes:

1(One) Headphones 6.1in. x 6.7in. x 2.8in. (15.6cm x 17.1cm x 7cm) 1(One) 3.5mm Aux-in Cable 1(One) Charging Cable 9.8in. / 1(One) Instruction Manual 3. Connection Diagram Micro USB Charging ron D) 3.5mm Aux-in Port LED Indicator Power / Answer / End Call 7. FCC Statement FCC STATEMENT 11. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuming the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

~ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

~ Consult the dealer or an experienced radio/TV technician for help. RF waming statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. 4. How to use 4.1.General Functions Desired Result Required Action Turn on & Press and hold the On / Off Button Enter the pairing] for 3 seconds. After tuming on, the fiiode: LED indicator flashes red/blue. Use a mobile phone with Bluetooth function or other Bluetooth devices to perform necessary pairing action. After pairing, the LED indicator slowly blinks with blue. Pairing Press and hold the On / Off Button for 3 seconds. Plug the Micro USB to the Micro USB port. When charging, the LED indicator turns red. After full charging, the LED indicator turns off. Charging 5 Press On / Off button to answer phone Answering call, press On / Off button again to end call. a Call Press and hold 2 seconds to reject call. Double click to redial last call Play / Pause Music Press On / Off button to play music and press it again to pause music. AX Safety instructions for the lithium battery and charging the product

~The input voltage to the product is 5V 1A. In order to charge the product in safe manner and reliable conditions, please only adopt cettified appropriate charger/ adapter for charging the product.

-Only charge the product at ambient temperatures between 10 deg C/ 50 deg F and 40 deg C/104 deg F.

- Do not heat above 70 deg C/158 deg F, e.g. Do not expose to sunlight or throw into fire.

-Switch off the product after use. Please note that we won't take any responsibility for any wrong operation

(e.g. Voltage higher than 5V) as this may result in severe injury or loss of property, and we cannot control the operating process during the time the user using this product. In extreme cases, abuse or misuse of Lithium battery pack can lead to explosion, heat generation, fire development or smoke development. FCC ID: 2ADM5-HP-0556 Ke Distributed by: 1616 Holdings, Inc. 701 Market Street, Suite 200 Philadelphia, PA 19106. Item # HP-0556 Made in China Keep All Relevant Information For Future Reference 8 Approval:

Date:

Zeeva Int Suite 1007 Road,Kow Tel: +852 E-mail: a ternational Lim 7B, 10th Floor wloon Bay, Ho 2-2868 0511 |

akshay.butan mited

, Exchange To ng Kong Fax: +852-25 ni@zeeva.c 524 1986 com ower, 33 Wang g Chiu Dat To:

Aut 743 We Pro Mo FCC For For Blu Exc mo ma com Sinc Sign Prin Tilt te:2022/01/10 FEDERAL thorizatio 35Oaklan COMMU nandEva dMillsRo NICATION luationDi oadColum NSCOMMI ivision mbia,MD2 21046 ISSION nalLimited NERICKID dherebyd SAFEHPA declareth AST3 hat e,ZeevaIn oductNam odelNo.:H CID:2ADM rBTMode nternation me:BTGEN P0556 M5HP05 e:BLE1M 56 M/2Mare disableby e ysoftware rBelowar etoothED reactivate DR( /4D ed:

QPSK),BD R(GFSK),

,EDR(8DPS SK) ceptforth odify/chan nufacture mpliancew hemanufa ngetheRF ersrespon withComm acturer,th paramete nsibilityto missions heenduse ers.Weac oprovidet rules. erdoesno cknowledg theradio othavean gethatit configura ycapabilit isthe tionstoe tyto nsure cerelyYou nature:

ntedNam le:Vice urs, e:Akshay President yPButani

24MHz AC6956

) ; Crystal

) provides the clock signal for the Bluetooth chip. Bluetooth signals Circuit Description 1. Battery(3.7V)provides energy for the Bluetooth chip(

oscillator(

get through a matching circuit, and then transmitted to the space through the antenna 2402MHz2480MHz . When the product is connected, the product can be in twoway communication with other Bluetooth devices, and then the device's Bluetooth module sends Bluetooth signals into space, the product receives the Bluetooth signal through an antenna, transmission to the Bluetooth chip via matching circuit.

Zeeva Int Suite 100 Road, Ko Tel: +852 E-mail: a ternational Lim 07B, 10th Floo owloon Bay, H 2-2868 0511 |

akshay.butan mited or, Exchange T Hong Kong Fax: +852-25 ni@zeeva.c 524 1986 com Tower, 33 Wa ang Chiu FCC C Author rization 2022/01/10 FED DERAL CO OMMUNICA ATIONS C COMMISSIO ONS Aut thorization a and Evaluat tion Divisio on 743 5 Oakland M Mills Road Colu umbia, MD D 21046 Sub bject: Agent t Authorizat tion To w whom it ma ay concern:

, Zeeva Inte chnology Co uipment auth acts carried same effect ernational L o.,Ltd to act horization, d out by She t as our own Limited the u t on its beha including th enzhen Accu n action. undersigned alf in all ma he signing o urate Techn d, hereby au atters relatin of all docum nology Co.,L uthorize She ng to applica ments relatin Ltd on our b enzhen Acc ation for ng to these m behalf shall matters. l have curate We,

, the unders signed, here eby certify th hat we are n not subject t to a denial o of federal b enefits, that t includes FC CC benefits s, pursuant t to Section 5 5301 of the Anti-Drug Abuse Act of 1988, 21 U U.S.C. 862. This s authorizat tion is valid d until furthe er written n otice from t the applican nt. Sinc cerely Your rs, Sign nature:

Prin nted Name:

Akshay P B Butani e: Vice Pr FR-170-B resident We, Tec Equ All the Titl QA-F