FCC ID: 2ADM5-SP-0893 BT RUGGED IPX SPEAKER

BASS JAXX ADUENTURE WIRELESS SPEAKER Instruction Manual Thank you for purchasing the Adventure Wireless Speaker. This manual provides more information about this wireless speaker, please read the instructions before using, Product Overview Onion LED Micro USB Swieh Indicator Charging Port Package Contents Adventure Wireless Speaker x tpe Mleto USB Charging Cable x tpe Instruction Manual x tpe Power On/Off Power on Slide the ON/OFF switch to the ON position Power off Sllde the ON/OFF switch to the OFF postion Note: Always side the Power switch to OFF position when notin use. Pair Wireless speaker with your mobile device 1. Keep the distance between your wireless speaker and mobile phone

(or other devices) within 32.8 Feet. 2. Power on the wireless speaker. 3. Activate the Bluetooth function on your phone within range and select

"BT ADVENTURE SPK from the list shown, 4. You will hear a beep sound when pairing is successful Reconnect Wireless speaker to your mobile device

\When powered on, the wireless speaker will automaticaly connect with the last successfully paired device. Charging your Wireless speaker

& For your safety, please always use appropriate SV input charger/Adapter to charge the product. DO NOT USE Quick Charging USB Adapter to charge the Product, as it might damage the product. 1. Use the Micro USB cable provided with this wireless speaker. 2. Connect the Micro USB plug to Micro USB charging port on the speaker, then connect the USB plug to a USB port on a computer or wall adapter to begin charging, 3. The light will turn red while charging and will turn off once fully charged. NoTE:

+ You must select a qualified charger from a regular manufacturer.

+ You must charge the Wireless speaker if it has been not used for more than 12 months.

~_. Us6 Plug Miro USB Pig Technical specification Driver Diameter: S2mm Impedance: 4 Ohms Power Supply: Lrion Battery 3.7V 300 mah Play Time: 2-3 Hours, Charging Tima: 1.5-2 Hours Bluetooth Range: 32.8 Feet Bluetooth Version: 5.0 Micro USB Cable Included FAQ

+ If the Wireless speaker cannot be paired with your device, please try the following:

Ensure that your speaker is in pairing mode or reconnection mode. Ensure that Bluetooth search function of your mobile device is activated.

* I the Wireless speaker cannot be recharged you use a power outlet, ensure that the power supply is connected securely and the outlet works. If you use a computer, ensure that it s connected and the USB port is powered. As Safety instructions forthe lithium battery and charging the product

= The input voltage tothe product is DC SV 1A,

+ In order to charge the product in safe manner and reliable conditions, please only adopt certified appropriate charger! adapter for charging the product,

~ Only charge the product at ambient temperatures between 10 deg "C/ 50 deg F and 40 deg "C/104 deg F.

= Do not heat above 70 deg C/158 deg F, eg. Do not expose to sunlight or throw into fr.

= Switch off the product after use.

= When the device is fully charged, disconnect the charger from the device and unplug the charger from the power outlet. Do not leave charging overight.

~ _ Please note that we wor't take any responsibiity for any wrong operation (eg. Voltage higher than 5V) as this may result in severe injury or loss of property, and we cannot Control the operating process during the time the user using this product.

~ _Inextreme cases, abuse or misuse of Lithium battery pack can lead to explosion, heat generation, fre development or smoke development. A CAUTION:

1. Do not fully submerge in water. This item is IPX4 resistance only 2. Keep the device dry. Avoid dusty, and dirty environments. Using the device in these environments may damage the circuitry. 3. De not use the device during thunderstorms to avoid any lightning-related damage or injury. 4. Donot attempt to disassemble or remanufacture the device, insert foreign objects into it, or immerse or expose it to water or other liquids. Doing so may lead to fre, explosion, or other hazards, 5. Keep the device away from excessive heat sources and direct sunlight. Do not place it on or in heating devices, such as microwave ovens, stoves, or radiators. The device may even explode in extreme overheating circumstances, FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

= Reorient or relocate the receiving antenna,

- Increase the separation between the equipment and receiver.

= Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

~ Consul the dealer or an experienced radio/TV technician for help. RF warning statement:

The device has been evaluated to meet general RF exposure requirement. SP-0893 1M 92234 06299 BNO Distributed by 1616 Holdings, Inc. 701 Market Street, Suite 200 Philadelphia, PA 19106 Made in China FCC ID: 2ADM5-SP-0893 Keep all relevant information for future reference

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200723836-RF EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Zeeva International Limited Suite 1007B, 10th Floor, Exchange Tower, 33 Wang Chiu Road,Kowloon Bay, Hong Kong Tel: +852-2868 0511 | Fax: +852-2524 1986 E-mail: akshay.butani@zeeva.com Date: 08/13/2020 To: FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 We, Zeeva International Limited hereby declare that Product Name: BT RUGGED IPX SPEAKER Model No: SP-0893 FCC ID: 2ADM5-SP-0893 For BT Mode: BLE are disable by software For Below are activated:

Bluetooth BDR(GFSK) , EDR(/4DQPSK), EDR(8DPSK) Except for the manufacturer, the end user does not have any capability to modify/change the RF parameters. We acknowledge that it is the manufacturers responsibility to provide the radio configurations to ensure compliance with Commissions rules. Sincerely Yours, Signature:

Printed Name: Akshay P Butani Tiltle: Vice President

Operation Description Battery (DC 3.7V) provides energy for the Bluetooth chip (BK3269); Crystal oscillator

(26MHz) provides the clock signal for the Bluetooth chip. Bluetooth signals get through a matching circuit, and then transmitted to the space through the antenna (2402-2480MHz). When the product is connected, the product can in two-way communication with other Bluetooth Devices, and then the devices Bluetooth module sends Bluetooth signals into space, the product receives the Bluetooth signal through an antenna, transmission to the Bluetooth chip via matching circuit. When need charging, input USB cable, and connected to the power supply, red light on, the light will change to green light when is power up.

Zeeva International Limited Suite 1007B, 10th Floor, Exchange Tower, 33 Wang Chiu Road, Kowloon Bay, Hong Kong Tel: +852-2868 0511 | Fax: +852-2524 1986 E-mail: akshay.butani@zeeva.com 07/14/2020 FCC Authorization FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We, Zeeva International Limited the undersigned, hereby authorize Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature:

Printed Name: Akshay P Butani Title: Vice President QA-FR-170-B