FCC ID: SRQ-MC801A 5G CPE with WCDMA, LTE, 5GNR and WiFi

1 3 1. Prepare Avalid nano-SIM card. MC80 Lets 01A go Gettting started with your d evice. is for reference only. View the label on your device to get the default information. The following figure 2 4 2. Insertthenano-SIM Card 3. Power on Your Device Connect the power adapter to your device and then your device willbe powered Open the slot cover at the bottom of the device and insertthenano-SIM card. on and connect to the Internet automatically. 4. Access the Internet Wi-Fi:Get the default SSID and password on the label and connect to the Network cable(RJ45):Connect with the computervia LAN portsand then Wi-Fi network with your mobile device, and then access the Internet. access the Internet. 5 7 6 8 5. Change YourDevice Settings Internet Wi-Fi Function You can change the device settings by logging in to the 5G CPE configuration Your device supports the Internet Wi-Fi function and you can use this function to web page. extend your existing Wi-Fi network. 1. View the label on your device to get thedefault Device Manager Website IP 1. Log in to the 5G CPE configuration page. address and Password. 2. Select Wi-FiSettings > Internet Wi-Fi. 3. Set the Internet Wi-Fi Switch to Enable, and click Apply. 4. Connect to the Wi-Fi hotspot. The following two methods are for your reference. Select a Wi-Fi hotspot listed in the Wi-Fi Hotspot area and click Connect. Enter a password in the Password text box and click Yes. Click Add Network, enter the Wi-Fi hotspot information in the Add Wi-Fi Hotspot area, and click Apply.Click the Wi-Fi hotspot you have added and then click Connect. 5. After the device is connected to the Wi-Fi hotspot successfully, you can 2. Launch the Internet browser and enter theDevice Manager Website IP access the Internet. addressin the address bar. Input the password and then click Login. 3. 4. After the 5G CPE configuration web page is opened, you can change the Wi-Fi SSID, password or other settings. Bridge Mode Cable B Broadband d Mode Your device service prov e supports the vider to access bridge mode an the Internet. nd you can use e this service fro om your Your device from your s e supports the c service provider cable broadban to access the In nd mode and yo nternet. ou can use this s service 1. Ensure that your devic ce can connect t to the Internet b by using your na ano-SIM 1. Connec ct either of the tw wo LAN ports a nd the broadba nd service netw work port card au utomatically. with a n network cable. 2. Log in t to the 5G CPE c configuration we eb page. 2. Log in t to the 5G CPE c configuration we eb page. 3. Change e the operation mode to Bridge e Modeand sele ect the WAN con nnection 3. Change e the operation mode to Cable Broadband Mo ode. network k port. The devi ce will be restar rted automatica ally. NOTE:

NOTE:

Please disc connect from the e Internet first a and then you can n change the m mode. Please disc 4. Connec connect from the ct the computer e Internet first a r or other cable and then you can e-connected clie n change the m ent to the LAN p mode. port you 4. Set the 5. Use yo detailedparame ur clients to acc etersgiven by yo our service prov et. cess the Interne vider. selecte d and the client t can obtain the e IP address from m the WAN DH CP host and con nnect to the Inte ernet directly. NOTE:

The cable-conn nected client connect ted to the other LAN port or the Wi-Fi con nnected clients canno ot visit the Internet, but the ey can communicate with each other. If yo ou want to change th he operation mode, yo ou can use this client to log g in to the configurati ion page to change t he mode. 9 Telephone WPS Your device supports the telephone function. Before using the telephone Your device supports the WPS function. You can use this function to connect a function, connect the telephone and insert the nano-SIM card. client to your device. To make a call:

1. Pick up the handset. 2. Dial the telephone number. 3. Wait for the call to be connected. 1. Press the WPS button on your device to activate the WPS function. The WIFI indicator is blinking. 2. Enable the WPS function on your client. 3. Follow the system prompts on your client to establish the connection. 10 12 11 Indicator Lights and Interfaces 1. SIGNAL

(Three lights) 2. NETWORK On: Three lights show the signal strength. More lights on means better signals. Off: There is no signal or no nano-SIM card inserted. Red:The device is powered on but not registered to the mobile network. network. Blue solid: The device isregistered or connected to the 3G/4Gmobile White solid: The device isregistered or connected to the 5G network. 3. WIFI 4. POWER 5. WPS key 6. External antenna port 7. PHONE port 8. LAN ports 9. Power port 10. nano-SIMcard On:WLAN(Wi-Fi) works normally. Blinking: WPS is activating. Off: WLAN(Wi-Fi) is off. On:The device is powered on. Off:The device is powered off. Press this key to activate the WPS function. Connect to external antennas.The antenna connector type is TS-9 and antenna frequency range is from 700MHz to 4200MHz. Connect to the WAN in the Cable Broadband Mode or connect to a PC. Connect to a telephone. Connect to the power adapter. Insert your nano-SIM card. Reset hole: Press and hold for about 3 seconds to restore your device to the factory settings. slotandreset hole 13 14 The download or upload speed is very The speed is dependent on signal strength. Check your announcement as soon as I lift the the PIN number has been entered. If the PIN number has slow. signal strength and network type. phone off the hook. been entered incorrectly, you need to enter the PUK code Troubleshooting Internet Related Problems Symptoms Possible Problems / Solutions I cannot access the Internet at all. Please check your configuration settings. Please wait 1~ 2 minutes for the router to initialize. Check your network indicators. I cannot visit the 5G CPE configuration Enter the correct IP address. You can view the label web page. I cannot establish the Wi-Fi connection between my device and the client. on your device to get the default IP address. Only use one network adapter in your PC. Do not use any proxy server. Make sure the Wi-Fi function is active. Refresh network list and select the correct SSID. Check the IP address to make sure your client can obtain an IP address automatically in the Internet protocol (TCP/IP) properties. Type the correct network key (Wi-Fi password) when you connect to the device. Voice Related Problems Symptoms Possible Problems/ Solutions There is no dial tone. Please wait for 1~2 minutes after the router is turned on. If the SIG indicator is weak, you have no good RF reception. Change the location of the router. There is a prompt / phone alert /

Make sure your nano-SIM card is inserted correctly and when prompted. The line is noisy/distorted when I lift the Remove any electrical appliance which is too close phone off the hook. to the phone or your device. The cable or phone set might be faulty. I hear a rapid engaged tone as soon as I lift the phone off the hook. Put the phone on the hook and try again. Please contact your service provider. After dialing the last digit I hear When you have finished dialing you can press the # key nothing/silence. or wait 4~8 seconds to connect the call. 15 16 You can get help by:

Sending an email to mobile@zte.com.cn Visiting https://www.ztedevices.com Others Symptoms Possible Problems / Solutions The signal indicator does not light. This indicates poor reception. Try moving the device to another location near the window. Problems with the passwords. For the default Wi-Fi connection password and the default password of the 5G CPE configuration web page, please check the label on the device. If you have changed the passwords and forgotten them, you need to restore the device to the factory default settings. Getting More Help 17 18 20 No part of this publication may be quoted, reproduced, translated or used in any form or by any means, from TV set, radio and other electronic equipment to avoid electromagnetic interference. electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE The device may interfere with medical devices like hearing aids and pacemakers. Consult a physician or LEGAL INFORMATION Copyright 2021 ZTE CORPORATION. All rights reserved. ZTE Corporation reserves the right to make modifications on print errors or update specifications in this guide without prior notice. Images and screenshots used in this guide may differ from the actual product. Content in this guide may differ from the actual product or software. ZTE and the ZTE logos are trademarks of ZTE Corporation. Other trademarks and trade names are those of their respective owners. Corporation. Notice Disclaimer Trademarks Version No.: R1.0 19 Warning and Notice Safety Precautions Some electronic devices may be susceptible to electromagnetic interference. Locate the device away the manufacturer of the medical device before using it. Please keep yourself at least 20 centimeters away from your device. Do not use your device in dangerous environments such as oil terminals or chemical factories where there are explosive gases or explosive products being processed. Please use original accessories or accessories that are authorized by ZTE. Unauthorized accessories may affect the device performance, damage the device or cause danger to you. Do not attempt to dismantle the device. There are no user-serviceable parts. Do not allow the device or accessories to come into contact with liquid or moisture at any time. Do not immerse the device in any liquid. Do not place objects on top of the device. This may lead to overheating of the device. The device must be placed in awell-ventilated environment for use. Do not expose the device to direct sunlight or store it in hot areas. High temperature can shorten the life of electronic devices. Do not allow children to play with the device or power adapter. The device is for indoor use only. Do not use the device outside. For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible. Cleaning and Maintaining Use an antistatic cloth to clean the device. Do not use chemical or abrasive cleanser as these could damage the plastic case. Turn off your device before you clean it. i. Reasonable abrasion. including interference that may cause undesired operation. Use the device within the temperature range of -20~+55, and the storage temperature range is -40

~+70. The humidity range is 5%~95%. Do not use your device during a thunderstorm. Remove the mains power pack from the wall socket. Limited Warranty This warranty does not apply to defects or errors in the product caused by:

ii. End users failure to follow ZTEs installation, operation or maintenance instructions or procedures. iii. End users mishandling, misuse, negligence, or improper installation, disassembly, storage, servicing iv. Modifications or repairs not provided by ZTE or a ZTE-certified individual. v. Power failures, surges, fire, flood, accidents, and actions of third parties or other events outside ZTEs vi. Usage of third-party products or usage in conjunction with third-party products if such defects are due or operation of the product. reasonable control. to the combined usage. vii. Any other cause beyond the range of normal usage intended for the product. End users have no right to reject or return the product, or receive a refund for the product from ZTE under This warranty is end users sole remedy and ZTEs sole liability for defective or nonconforming items, and is in lieu of all other warranties, expressed, implied or statutory, including but not limited to the implied warranties of merchantability and fitness for a particular purpose, unless otherwise required under the mandatory provisions of the law. Limitation of Liability ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting from or arising out of or in connection with using of this product, no matter whether or not ZTE had been advised, knew or should have known of the possibility of such damages, including, but not limited to FCC Regulations:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver. lost profits, interruption of business, cost of capital, cost of substitute facilities or product, or any downtime

-Consult the dealer or an experienced radio/TV technician for help.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 21 22 the above-mentioned situations. determined by turning the equipment off and on, the user is encouraged to try to correct the interference by Caution: Changes or modifications not expressly approved by the party responsible for compliance could gain and required antenna impedance for each antenna type indicated. Antenna types not included in this void the users authority to operate the equipment. list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with Radio Frequency (RF) Exposure this device. Your device contains a transmitter and a receiver. When it is ON, it receives and transmits RF energy. Immediately following the above notice, the manufacturer shall provide a list of all antenna types approved When you communicate with your device, the system handling your connection controls the power level at for use with the transmitter, indicating the maximum permission antenna gain (in dBi) and required which your device transmits. impedance for each. Important safety information regarding radiofrequency radiation (RF) exposure. To ensure compliance with This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the RF exposure guidelines the device must be used with a separation from the body. Failure to observe these following two conditions:

instructions could result in your RF exposure exceeding the relevant guideline limits.

(1) this device may not cause interference, and The transmitter is using external antenna that operate at 20cm or more from nearby persons.

(2) this device must accept any interference, including interference that may cause undesired operation of The FCC grant can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching This Class B digital apparatus complies with Canadian ICES-003. the device. IC: 5200E-MC801A on FCC ID: SRQ-MC801A. IC Notice This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible IC Radiation Exposure Statement This device complies with IC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the IC radio frequency exposure limits, human proximity to the antenna 23 shall not be less than 20cm (8 inches) during normal operation. 24 cost. Cetappareilestconforme aux limitesd'exposition aux rayonnements de la CNR-102 definies pour unenvironnement non controleAfind'eviter la possibilite de depasser les limitesd'expositionauxfrequences radio de la CNR-102, la proximitehumaine a l'antenne ne doit pas etreinferieure a 20 cm (8 pouces) pendant le fonctionnementnorma. ZTE CORPORATION Postcode: 518057 NO. 55, Hi-tech Road South, Shenzhen, P.R.China 25 26

bottom of device RUTEADOR PARA RED (CPE) ZTE sh NOM ___ IDLAINETNNAIIIBGM il Tt MAC:

re FCC ID:SRQ-MC801A WiFi SSID1 Telcel-ZTE-MC801A-XXXX }

fo i, WiFi SSID2:

) Telcel-ZTE-MC801A-XXXX-5G

( ) Teeazte cs C RESET/Q Device Manager Website htipu/192.168.8.1 MADE IN CHINA Website Password:TeloelXXXX _ Hecho en China Alimentacion:12Vce 1.58 Modelo:MC801A

ZTE Corporation Request for Confidentiality Date: _2022-1-8_ Subject: Confidentiality Request for: _____ FCC ID: SRQ-MC801A ____ Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent*1 Permanent Permanent Permanent Permanent Permanent*

Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual

*Note: ______(Insert Explanation as Necessary)______ ______ ZTE Corporation _____ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of __180_ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TCB in the event information regarding the product or the product is made available to the public. TCB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By:

Yu Gong

(Signature/Title2)

(Print name)

ZTE Corporation UNII Declaration Letter We have declared below featured for FCC equipment authorization, device FCC ID: SRQ-MC801A

(1) DFS Device --

Master, Client without radar detection capability, Client with Radar detection capability , N/A

(2) Active / Passive Scanning , adhoc mode access point capability Frequency Band

(MHz) Active Scanning

(the device can transmit a probe

(beacon)) 2412 2462 MHz 2422 2452 MHz 5745 5825 MHz 5755 5795 MHz 5180 5240 MHz 5190 5230 MHz 5260 5320 MHz 5270 5310 MHz 5500 5700 MHz Yes, 5510 5670 MHz Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, No No No No No No No No No No passive scanning

(where the device is can listen only with no probes) Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, No No No No No No No No No No

(3) Country code selection ability -

If no, pls explain how was implemented : use network utility

(4) Meet 15.202 requirement -

pls check below :

Yes , Yes , No , No Ad Hoc Mode capability Access point capability Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, No No No No No No No No No No Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, No No No No No No No No No No A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.

(5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. No Apply , Apply ,

(If apply , pls help to provide explanation on how it was implement (By hardware or software , and how software was controlled) If you have any questions, please feel free to contact me at the address shown below. Yours sincerely, Signatory Printed NameGong Yu

ZTE Corporation POWER OF ATTORNEY DATE: 1/8/2022 To:

Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 We, the undersigned, hereby authorize TA Technology (Shanghai) Co., Ltd. /

Yu Hongmei on our behalf, to apply to FCC on our equipment for FCC ID:

SRQ-MC801A. Any and all acts carried out by TA Technology (Shanghai) Co., Ltd. / Yu Hongmei on our behalf shall have the same effect as acts of our own. Sincerely, Print name: Yu Gong Company: ZTE Corporation.