all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User Manual | Users Manual | 1.53 MiB | May 19 2022 | |||
1 2 |
|
Internal photo | Internal Photos | 3.22 MiB | May 19 2022 | |||
1 2 |
|
External photo | External Photos | 625.05 KiB | May 19 2022 | |||
1 2 |
|
Label | ID Label/Location Info | 145.22 KiB | May 19 2022 | |||
1 2 |
|
Appendix B for -R3 module | Test Report | 1.13 MiB | May 19 2022 | |||
1 2 |
|
Appendix B for -RX module | Test Report | 745.70 KiB | May 19 2022 | |||
1 2 |
|
Applicant Declaration Letter | Cover Letter(s) | 117.91 KiB | May 19 2022 | |||
1 2 |
|
Auth letter | Cover Letter(s) | 27.37 KiB | May 19 2022 | |||
1 2 | Block diagram RF | Block Diagram | May 19 2022 | confidential | ||||
1 2 | Bolckdiagram unit | Block Diagram | May 19 2022 | confidential | ||||
1 2 |
|
Confidentiality FCC | Cover Letter(s) | 86.71 KiB | May 19 2022 | |||
1 2 |
|
MCL | Cover Letter(s) | 121.74 KiB | May 19 2022 | |||
1 2 |
|
MPE | RF Exposure Info | 375.09 KiB | May 19 2022 | |||
1 2 | Operational description | Operational Description | May 19 2022 | confidential | ||||
1 2 | Schematics RF | Schematics | May 19 2022 | confidential | ||||
1 2 | Schematics unit | Schematics | May 19 2022 | confidential | ||||
1 2 |
|
Setup photo | Test Setup Photos | 442.69 KiB | May 19 2022 | |||
1 2 |
|
Test report | Test Report | 940.88 KiB | May 19 2022 | |||
1 2 |
|
Appendix A for 2.4G WiFi | Test Report | 3.36 MiB | May 19 2022 |
1 2 | User Manual | Users Manual | 1.53 MiB | May 19 2022 |
3 5 6 1 2 3 My Device Hik-Connect OR Sites:xxx Hik-ProConnect Add Device xxxx OR POWER ON TRIGGER 2 4 5 6 Please pull the antenna cable carefully to prevent damage. 7 power 8 1 AX PRO M2H Quick Start Guide 1 2 3 4 2 1 E N G L I S H Appearance 1 1. Main Board 4. Battery 2 2. Power Switch 5. Antenna Position 3. Tamper Switch 6. Loudspeaker Installation and Wiring Note: Power down the control panel before installation and wiring. 1. Loosen the screws and open the case. 2. Take out the upper main board. 3. Take out the lower main board. 4. Fix the rear case on the wall. 5. Install the lower main board and the loudspeaker. 6. (Wiring before install the upper main board.) Install the upper main board. 7. Connect the power supply and turn on the switch. 8. Close the case and tighten the screws. Set Up 3 1.Add the AX PRO to Hik-ProConnect or Hik-Connect APP. 2.Enroll the peripheral to the AX PRO. 4 User Manual Specification Basic User RF frequency Keyfob Wireless sounder Keypad Wireless repeater Tag Zone Transmitter Onboard video clip Admin, installer, user Area LEDs indication Programming tool Network Software Memory Log stored 433 Mhz 48 6 8 (Including Tag reader) 4 48 Up to 96 (including 48 PIRCAMs & 16 onboard Wired Zones & onboard Wired Outputs) Up to 96 (Single), up to 5 (Multi) 4 1, 120, 46 32 Arm/Disarm, Alarm, Alert, Cloud, Power Alarm&abnormal (3000), user operation
(1500), user management (200) Hik-Connect/Hik-ProConnect/Web Portal/ IVMS4200/ Convergence Cloud Wired network, Wi-Fi, 3/4G on board SIA DC09 (SIA level 2, Contact ID), ISUP, ISAPI (SDK), CSV-IP, FSK Module Hik-IP Receiver & Hik-IP Receiver Pro
(Sur-Gard & Ademco 685) Supports video verification and remote control Dual 100 to 240V~, 50/60 Hz, 0.66A to 0.3A 12v 7Ah storage battery (sold separately), up to 36 hours Communication ARC protocol SIM slot Power supply Battery type Hardware Others Operation temperature Dimension (WHD) Weight
-10 C to 40 C 261 mm 199 mm 86.4 mm 1083g (No battery) FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation 4 User Manual Z1 COM Z2 Z3 COM Z4 Z5 COM Z6 Z7 COM Z8
- AUX +
Z9 COM Z10 Z11 COM Z12 Z13 COM Z14 Z15 COM Z16
-EXT+ PGM1 C1 PGM2 C2 OUTPUT CONTROL SMOKE DETECTOR SEOL DEOL DOUBLE ZONE UD25504B-B Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China ENGLISH ESPAOL PORTUGUS (Brasil) SLOVENINA 2021 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (https://www.hikvision.com/). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product. Trademarks and other Hikvisions trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners. Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL FAULTS AND ERRORS. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT
(INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-
CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER PREVAILS. This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the RE Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see:www.recyclethis.info In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region. The equipment shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the equipment. The socket-outlet shall be installed near the equipment and shall be easily accessible. Ensure correct wiring of the terminals for connection to an AC mains supply. CAUTION BATTERY CAUTION indicates hazardous live and the external wiring connected to the terminals requires installation by an instructed person. The equipment has been designed, when required, modified for connection to an IT power distribution system. No naked flame sources, such as lighted candles, should be placed on the equipment. The serial port of the equipment is used for debugging only. This equipment is not suitable for use in locations where children are likely to be present. Install the equipment according to the instructions in this manual. To prevent injury, this equipment must be securely attached to the floor/wall in accordance with the installation instructions. To prevent possible hearing damage, do not listen at high volume levels for long periods. The additional force shall be equal to three times the weight of the equipment but not less than 50N. The equipment and its associated mounting means shall remain secure during the installation. After the installation, the equipment, including any associated mounting plate, shall not be damaged. 1. This equipment is not suitable for use in locations where children are likely to be present. 2. CAUTION: Risk of explosion if the battery is replaced by an incorrect type. 3. Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in the case of some lithium battery types). 4. Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion. 5. Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of flammable liquid or gas. 6. Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas. 7. Dispose of used batteries according to the instructions. 8. + identifies the positive terminal(s) of equipment which is used with, or generates direct current. - identifies the negative terminal(s) of equipment which is used with, or generates direct current. 9. identifies the battery holder itself and identifies the positioning of the cell(s) inside the battery holder. 6. Altavoz Apariencia Instalacin y cableado 2. Interruptor de alimentacin 3. Interruptor antimanipulacin 5. Posicin de la antena 1 1. Placa principal 4. Batera 2 Nota: Retire la alimentacin del panel de control antes de la instalacin y la conexin de cables. 1. Afloje los tornillos y abra la carcasa. 2. Saque la placa principal superior. 3. Saque la placa principal inferior. 4. Fije la carcasa trasera a la pared. 5. Instale la placa principal inferior y el altavoz. 6. (Conecte los cables antes de instalar la placa principal superior.) Instale la placa principal superior. Configurar 7. Conecte la fuente de alimentacin y encienda el interruptor. 8. Cierre la carcasa y apriete los tornillos. 3 1. Aada el AX PRO a Hik-ProConnect o a la aplicacin Hik-Connect. 2. Registre el perifrico a AX PRO. 4 Manual de usuario Especificacin 3. Chave de violao 6. Alto-falante 2. Interruptor 5. Posio da antena Apresentao Instalao e cabeamento 1 1. Placa principal 4. Bateria 2 Observao: antes da instalao e do cabeamento, desligue o painel de controle . 1. Solte os parafusos e abra a caixa. 2. Retire a placa principal superior. 3. Retire a placa principal inferior. 4. Prenda a caixa traseira na parede. 5. Instale a placa principal inferior e o alto-falante. 6. (Cabeamento antes de instalar a placa principal superior.) Instale a placa principal superior. 7. Conecte a fonte de alimentao e ligue o interruptor. 8. Feche a caixa e aperte os parafusos. Configurao 3 1. Adicione o AX PRO ao Hik-ProConnect ou ao aplicativo Hik-Connect. 2. Registre o perifrico no AX PRO. 4 Especificaes Manual do usurio 6. Zvonik Pregled naprave 2. Stikalo za vklop/izklop 3. Stikalo za nedovoljene posege 5. Poloaj antene Namestitev in oienje 1 1. Glavna ploa 4. Baterija 2 Opomba: Pred namestitvijo in oienjem izklopite nadzorno ploo. 1. Odvijte vijake in odprite ohije. 2. Izvlecite zgornjo glavno ploo. 3. Izvlecite spodnjo glavno ploo. 4. Pritrdite zadnje ohije na steno. 5. Namestite spodnjo glavno ploo in zvonik. 6. (Oienje pred namestitvijo zgornje glavne ploe.) Namestite zgornjo glavno ploo. Nastavi 7. Prikljuite napajanje in vklopite stikalo. 8. Zaprite ohije in privijte vijake. 3 1. Dodajte AX PRO v aplikacijo Hik-ProConnect ali Hik-Connect. 2. Vpiite zunanjo napravo v AX PRO. 4 Uporabniki prironik Tehnini podatki SRPSKI 5. Poloaj antene Instalacija i oienje 1 Izgled 1. Glavna ploa 2. Prekida za napajanje 3. Prekida za spreavanje neovlaenih izmena 4. Baterija 2 Napomena: Iskljuite kontrolnu tablu pre instalacije i oiavanja. 1. Otpustite zavrtnje i otvorite kuite. 2. Izvadite gornju glavnu plou. 3. Izvadite donju glavnu plou. 4. Namontirajte zadnji deo kuita na zid. 5. Instalirajte donju glavnu plou i zvunik. 6. (Oiite pre instalacije gornje glavne ploe.) 6. Zvunik Instalirajte gornju glavnu plou. Podeavanje 7. Prikljuite napajanje i ukljuite pomou prekidaa. 8. Zatvorite kuite i pritegnite zavrtnje. 3 1. Dodajte AX PRO u Hik-ProConnect ili aplikaciju Hik-Connect. 2. Uvrstite periferni ureaj u AX PRO. 4 Specifikacija Korisniki prirunik Bsico Usuario Software Frecuencia de RF Llavero transmisor Sirena inalmbrica Teclado Repetidor inalmbrico Etiqueta 433 MHz 48 6 8 (incluyendo el lector de etiquetas) 4 48 Hasta 96 (incluyendo 48 Cmaras PIR y 16 zonas cableadas integradas y salida cableadas integradas) Hasta 96 (simple), hasta 5 (mltiple) Transmisor Videoclips en memoria interna Administrador, instalador, usuario rea 4 1, 120, 46 Indicadores led Registro de memoria almacenado 32 Armar/Desarmar, Alarma, Alerta, Nube, Alimentacin Alarma&anormal (3000), operacin de usuario (1500), administracin de usuarios (200) Herramienta de programacin Hik-Connect/Hik-ProConnect/Portal web/
IVMS4200/Nube convergente Zona Red Red por cable, Wi-Fi, 3/4G en la placa SIA DC09 (SIA nivel 2, ID del contacto), ISUP, ISAPI (SDK), CSV-IP, Mdulo FSK Receptor Hik-IP y receptor Hik-IP Pro (Sur-
Gard & Ademco 685) Admite la verificacin por vdeo y el control remoto Dual 100 - 240V~, 50/60 Hz, 0.66A - 0.3A Batera para almacenamiento de 12 V y 7 Ah (a la venta por separado), hasta 36 horas Comunicacin Protocolo ARC Hardware Otros Ranura para tarjetas SIM Fuente de alimentacin Tipo de batera Temperatura de funcionamiento Dimensiones (An x Al x F) Peso De -10 C a 40 C 261 x 199 x 86,4 mm 1083 g (Sin batera) 2022 Hangzhou Hikvision Digital Technology Co., Ltd. Todos los derechos reservados. Sobre este manual Este manual incluye las instrucciones de utilizacin y gestin del producto. Las figuras, grficos, imgenes y cualquier otra informacin que encontrar en lo sucesivo tienen nicamente fines descriptivos y aclaratorios. La informacin incluida en el manual est sujeta a cambios, sin aviso previo, debido a las actualizaciones de software u otros motivos. Visite el sitio web de Hikvision https://www.hikvision.com/ para acceder a la ltima versin de este manual. Utilice este manual con la gua y asistencia de profesionales capacitados en el soporte del producto. Marcas registradas y otras marcas comerciales y logotipos de Hikvision son propiedad de Hikvision en diferentes jurisdicciones. Las dems marcas comerciales y logotipos mencionados son propiedad de sus respectivos dueos. Descargo de responsabilidad EN LA MEDIDA MXIMA PERMITIDA POR LAS LEYES APLICABLES, ESTE MANUAL Y EL PRODUCTO DESCRITO INCLUIDOS SU HARDWARE, SOFTWARE Y FIRMWARE SE SUMINISTRAN TAL CUAL Y CON TODOS SU FALLOS Y ERRORES. HIKVISION NO OFRECE GARANTAS, EXPLCITAS O IMPLCITAS, INCLUIDAS, A MODO ENUNCIATIVO, COMERCIABILIDAD, CALIDAD SATISFACTORIA O IDONEIDAD PARA UN PROPSITO EN PARTICULAR. EL USO QUE HAGA DEL PRODUCTO CORRE BAJO SU NICO RIESGO. EN NINGN CASO, HIKVISION PODR CONSIDERARSE RESPONSABLE ANTE USTED DE NINGN DAO ESPECIAL, CONSECUENTE, INCIDENTAL O INDIRECTO, INCLUYENDO, ENTRE OTROS, DAOS POR PRDIDAS DE BENEFICIOS COMERCIALES, INTERRUPCIN DE LA ACTIVIDAD COMERCIAL, PRDIDA DE DATOS, CORRUPCIN DE LOS SISTEMAS O PRDIDA DE DOCUMENTACIN, YA SEA POR INCUMPLIMIENTO DEL CONTRATO, AGRAVIO (INCLUYENDO NEGLIGENCIA), RESPONSABILIDAD DEL PRODUCTO O EN RELACIN CON EL USO DEL PRODUCTO, INCLUSO CUANDO HIKVISION HAYA RECIBIDO UNA NOTIFICACIN DE LA POSIBILIDAD DE DICHOS DAOS O PRDIDAS. USTED RECONOCE QUE LA NATURALEZA DE INTERNET IMPLICA RIESGOS DE SEGURIDAD INHERENTES Y HIKVISION NO TENDR NINGUNA RESPONSABILIDAD POR EL FUNCIONAMIENTO ANORMAL, FILTRACIONES DE PRIVACIDAD U OTROS DAOS RESULTANTES DE ATAQUES CIBERNTICOS, ATAQUES DE HACKERS, INFECCIONES DE VIRUS U OTROS RIESGOS DE SEGURIDAD DE INTERNET; SIN EMBARGO, HIKVISION PROPORCIONAR APOYO TCNICO OPORTUNO DE SER NECESARIO. USTED ACEPTA USAR ESTE PRODUCTO DE CONFORMIDAD CON TODAS LAS LEYES APLICABLES Y SOLO USTED ES EL NICO RESPONSABLE DE ASEGURAR QUE EL USO CUMPLA CON DICHAS LEYES. EN ESPECIAL, USTED ES RESPONSABLE DE USAR ESTE PRODUCTO DE FORMA QUE NO INFRINJA LOS DERECHOS DE TERCEROS, INCLUYENDO, DE MANERA ENUNCIATIVA MAS NO LIMITATIVA, DERECHOS DE PUBLICIDAD, DERECHOS DE PROPIEDAD INTELECTUAL, DERECHOS RELATIVOS A LA PROTECCIN DE DATOS Y OTROS DERECHOS RELATIVOS A LA PRIVACIDAD. NO UTILIZAR ESTE PRODUCTO PARA NINGN USO FINAL PROHIBIDO, INCLUYENDO EL DESARROLLO O LA PRODUCCIN DE ARMAS DE DESTRUCCIN MASIVA, EL DESARROLLO O PRODUCCIN DE ARMAS QUMICAS O BIOLGICAS, NINGUNA ACTIVIDAD EN EL CONTEXTO RELACIONADO CON ALGN EXPLOSIVO NUCLEAR O EL CICLO DE COMBUSTIBLE NUCLEAR INSEGURO O EN APOYO DE ABUSOS DE LOS DERECHOS HUMANOS. EN CASO DE HABER CONFLICTO ENTRE ESTE MANUAL Y LA LEGISLACIN VIGENTE, ESTA LTIMA PREVALECER. Este producto, y en su caso tambin los accesorios suministrados, tienen la marca "CE" y por tanto cumplen con las normas europeas armonizadas aplicables enumeradas en la Directiva de equipos de radio 2014/53/UE, la Directiva de compatibilidad electromagntica 2014/30/UE y la Directiva de restriccin del uso de sustancias peligrosas 2011/65/UE. 2012/19/UE (directiva RAEE, residuos de aparatos elctricos y electromagnticos): En la Unin Europea, los productos marcados con este smbolo no pueden ser desechados en el sistema de basura municipal sin recogida selectiva. Para un reciclaje adecuado, entregue este producto en el lugar de compra del equipo nuevo equivalente o deshgase de l en el punto de recogida designado a tal efecto. Para ver ms informacin, visite: www.recyclethis.info. 2006/66/CE (directiva sobre bateras): Este producto lleva una batera que no puede ser desechada en el sistema municipal de basuras sin recogida selectiva dentro de la Unin Europea. Consulte la documentacin del producto para ver la informacin especfica de la batera. La batera lleva marcado este smbolo, que incluye unas letras indicando si contiene cadmio (Cd), plomo
(Pb), o mercurio (Hg). Para un reciclaje adecuado, entregue la batera a su vendedor o llvela al punto de recogida de basuras designado a tal efecto. Para ver ms informacin, visite: www.recyclethis.info. PRECAUCIN Para usar el producto debe cumplir estrictamente con la normativa de seguridad elctrica de su pas y regin. No se expondr el equipo a goteos ni salpicaduras y no se colocarn sobre l objetos llenos de lquidos, como jarrones. La toma de corriente tiene que estar cerca del equipo y ser de fcil acceso. Asegrese de que el cableado de los terminales para la conexin a una fuente de alimentacin de CA sea correcto. PRECAUCIONES RELATIVAS A LA BATERA indica la existencia de tensin peligrosa, por lo que el cableado externo conectado a los terminales tiene que ser instalado por una persona con la formacin adecuada. El equipo ha sido diseado, cuando es necesario, con modificaciones para conectarlo a un sistema de distribucin de alimentacin elctrica para equipos informticos. No coloque llamas abiertas, como velas encendidas, sobre el equipo. El puerto serie del equipo se utiliza nicamente con fines de depuracin. Este equipo no es adecuado para utilizarlo en lugares donde pueda haber nios. Instale el equipo de acuerdo con las instrucciones de este manual. Para evitar lesiones, este equipo debe estar firmemente sujeto al suelo/pared de acuerdo con las instrucciones de instalacin. Para evitar posibles prdidas de audicin, no escuche a volumen alto durante largos periodos de tiempo. La fuerza adicional debe ser equivalente a tres veces el peso del equipo, pero no inferior a 50 N. El equipo y el soporte asociado deben permanecer seguros durante la instalacin. Tras la instalacin, no se debe daar el equipo ni tampoco las placas de montaje asociadas. 1. Este equipo no es adecuado para utilizarlo en lugares donde pueda haber nios. 2. PRECAUCIN: Riesgo de explosin si se reemplaza la batera por otra de tipo incorrecto. 3. Una sustitucin inadecuada de la batera por otra de tipo incorrecto podra inhabilitar alguna medida de proteccin (por ejemplo, en el caso de algunas bateras de litio). 4. No arroje la batera al fuego ni la meta en un horno caliente, ni intente aplastar o cortar mecnicamente la batera, ya que podra explotar. 5. No deje la batera en lugares con temperaturas extremadamente altas, ya que podra explotar o tener fugas de lquido electroltico o gas inflamable. 6. No permita que la batera quede expuesta a una presin de aire extremadamente baja, ya que podra explotar o tener fugas de lquido electroltico o gas inflamable. 7. Deshgase de las bateras usadas conforme a las instrucciones. 8. + identifica los terminales positivos de los equipos que se utilizan con corriente continua o que la generan. - identifica los terminales negativos de los equipos que se utilizan con corriente continua o que la generan. 9. identifica el portapilas e identifica la posicin de las celdas dentro del portapilas. Bsico Usurio Software Frequncia de RF Comando Sirene sem fio Teclado Repetidor sem fio Identificador 433 MHz 48 6 8 (incluindo leitor de tags) 4 48 Zona At 96 (incluindo 48 PIRCAMs e 16 zonas com fio e sadas com fio integradas) Transmissor Videoclipe integrado Administrador, instalador, usurio rea Indicao dos LEDs Registros de memria armazenados At 96 (individual), at 5 (multi) 4 1, 120, 46 32 Armar/desarmar, alarme, alerta, nuvem, energia Alarme e anormal (3000), operao do usurio (1500), gerenciamento do usurio
(200) Ferramenta de programao Hik-Connect/Hik-ProConnect/Portal web/
IVMS4200/nuvem de convergncia Network (Rede) Rede com fio, Wi-Fi, 3/4G integrado SIA DC09 (SIA nvel 2, Contact ID), ISUP, ISAPI (SDK), CSV-IP, mdulo FSK Receptor Hik-IP e receptor Hik-IP Pro (Sur-
Gard e Ademco 685) Suporta verificao de vdeo e controle remoto RF-frekvenca Kodirni klju Brezini zvonik Tipkovnica Brezini ponavljalnik Oznaka 433 MHz 48 6 8 (vkljuno z bralnikom oznak) 4 48 Osnovno Osnovno Uporabnik Cona Oddajnik Vgrajen videoposnetek Skrbnik, nameevalec, uporabnik Obmoje Indikatorji LED Programska oprema Shranjena spominska datoteka Orodja za programiranje Do 96 (vkljuno z 48 kamerami PIRCAM in 16 vgrajenih inih con in vgrajenih izhodov) Do 96 (enojni), do 5 (vedelni) 4 1, 120, 46 32 Aktivirano/deaktivirano, alarm, opozorilo, oblak, napajanje Alarm in neobiajno (3000), operacije uporabnika (1500), upravljanje uporabnikov (200) Hik-Connect/Hik-ProConnect/Web Portal/
IVMS4200/Convergence oblak SIA DC09 (SIA raven 2, ID za stik), ISUP, ISAPI (SDK), CSV-IP, modul FSK Sprejemnik Hik-IP in sprejemnik Hik-IP Pro
(Sur-Gard in Ademco 685) Podpira preverjanje videov in oddaljeno upravljanje Omreje ino omreje, Wi-Fi, 3/4G vgrajeno Hardware Outros Slot de SIM Fonte de alimentao Duplo 100 - 240V~, 50/60 Hz, 0.66A - 0.3A Tipo de pilha Temperatura de operao Dimenses (L x A x P) Peso Bateria de armazenamento de 12 V/7 Ah
(vendida separadamente), at 36 horas
-10 C a 40 C 261 mm x 199 mm x 86,4 mm 1083 g (sem bateria) Rea za SIM-kartico Napajanje Dve 100 - 240V~, 50/60 Hz, 0.66A - 0.3A Strojna oprema Tip baterije 12v 7Ah baterija za shranjevanje
(naprodaj loeno), do 36 ur Drugo Operativna temperatura Dimenzije ( x V x G) Tea od -10 C do 40 C 261 mm x 199 mm x 86,4 mm 1083 g (brez baterije) Korisnik 1, 120, 46 Softver Datoteka zapisnika memorije je sauvana Alarm i abnormalno (3000), korisnika radnja (1500), korisniko upravljanje (200) RF frekvencija Privezak Beina sirena Tastatura Beini repetitor Tag Zona Odailja Video-snimak sa ploe Administrator, instalater, korisnik Podruje LED indikatori Programerski alat Mrea 433 MHz 48 6 8 (ukljuujui ita tagova) 4 48 Do 96 (ukljuujui 48 PIRCAM-ova i 16 beinih zona i beinih izlaza ugraenih u plou) Do 96 (pojedinani), do 5 (multi) 4 32 Aktivacija/deaktivacija, alarm, upozorenje, oblak, struja Hik-Connect/Hik-ProConnect/veb-portal/
IVMS4200/konvergencija u oblaku Oiena mrea, Wi-Fi, 3/4G na ploi SIA DC09 (SIA 2. nivo, kontaktni ID), ISUP, ISAPI (SDK), CSV-IP, FSK modul Hik-IP prijemnik i Hik-IP prijemnik Pro
(Sur-Gard i Ademco 685) Podrava video-verifikaciju i daljinsko upravljanje Dvostruko 100 - 240V~, 50/60 Hz, 0.66A - 0.3A Punjiva baterija od 12 V i 7 Ah (prodaje se zasebno), do 36 sati Prorez za SIM Napajanje Tip baterije Hardver Ostali Radna temperatura Dimenzije ( x V x D) Teina Od -10 C do 40 C 261 mm x 199 mm x 86,4 mm 1083 g (bez baterije) Comunicao Protocolo ARC Komunikacija Protokol ARC Komunikacija ARC protokol 2022 Hangzhou Hikvision Digital Technology Co., Ltd. Todos os direitos reservados. Acerca deste Manual O Manual inclui instrues para utilizar e gerir o produto. As fotografias, os grficos, as imagens e todas as outras informaes doravante apresentadas destinam-se apenas a fins de descritivos e informativos. As informaes que constam do Manual esto sujeitas a alterao, sem aviso prvio, devido a atualizaes de firmware ou a outros motivos. Encontre a verso mais recente deste Manual no site da Hikvision
(https://www.hikvision.com/). Utilize este Manual sob orientao e com a assistncia de profissionais formados neste Produto. Marcas comerciais e outras marcas registradas e logotipos da Hikvision so propriedade da Hikvision em diversas jurisdies. Outras marcas comerciais e logtipos mencionados so propriedade dos respetivos proprietrios. Aviso legal NA MEDIDA MXIMA PERMITIDA PELA LEI APLICVEL, ESTE MANUAL E O PRODUTO DESCRITO, COM O SEU HARDWARE, SOFTWARE E FIRMWARE, SO FORNECIDOS TAL COMO ESTO E COM TODAS AS SUAS FALHAS E ERROS. A HIKVISION EXCLUI, DE FORMA EXPLCITA OU IMPLCITA, GARANTIAS DE, INCLUINDO E SEM LIMITAO, COMERCIABILIDADE, QUALIDADE DO SERVIO OU ADEQUAO A UMA FINALIDADE ESPECFICA. A SUA UTILIZAO DESTE PRODUTO FEITA POR SUA CONTA E RISCO. EM NENHUMA CIRCUNSTNCIA, A HIKVISION SER RESPONSVEL POR SI EM RELAO A QUAISQUER DANOS ESPECIAIS, CONSEQUENCIAIS, INCIDENTAIS OU INDIRETOS, INCLUINDO, ENTRE OUTROS, DANOS PELA PERDA DE LUCROS COMERCIAIS, INTERRUPO DA ATIVIDADE, PERDA DE DADOS, CORRUPO DE SISTEMAS OU PERDA DE DOCUMENTAO SEJA COM BASE NUMA VIOLAO DO CONTRATO, ATOS ILCITOS (INCLUNDO NEGLIGNCIA), RESPONSABILIDADE PELO PRODUTO OU, DE OUTRO MODO, RELACIONADA COM A UTILIZAO DO PRODUTO, AINDA QUE A HIKVISION TENHA SIDO AVISADA SOBRE A POSSIBILIDADE DE TAIS DANOS OU PERDAS. O UTILIZADOR RECONHECE QUE A NATUREZA DA INTERNET OFERECE RISCOS DE SEGURANA INERENTES E QUE A HIKVISION NO SER RESPONSABILIZADA POR UM FUNCIONAMENTO ANORMAL, PERDA DE PRIVACIDADE OU OUTROS DANOS RESULTANTES DE ATAQUES INFORMTICOS, ATAQUES DE PIRATARIA, INFEO POR VRUS OU OUTROS RISCOS ASSOCIADOS SEGURANA DA INTERNET. NO ENTANTO, A HIKVISION PRESTAR APOIO TCNICO ATEMPADO, SE SOLICITADO. O UTILIZADOR ACEITA UTILIZAR ESTE PRODUTO EM CONFORMIDADE COM TODAS AS LEIS APLICVEIS E SER O NICO RESPONSVEL POR GARANTIR QUE A SUA UTILIZAO CONFORME LEI APLICVEL. PARTICULARMENTE, O UTILIZADOR O RESPONSVEL PELA UTILIZAO DESTE PRODUTO DE MODO QUE NO INFRINJA OS DIREITOS DE TERCEIROS, INCLUINDO, ENTRE OUTROS, OS DIREITOS DE PUBLICIDADE, DIREITOS DE PROPRIEDADE INTELECTUAL OU DE PROTEO DE DADOS, OU QUAISQUER OUTROS DIREITOS DE PRIVACIDADE. O UTILIZADOR NO PODER UTILIZAR ESTE PRODUTO PARA QUAISQUER UTILIZAES FINAIS PROIBIDAS, INCLUINDO O DESENVOLVIMENTO OU PRODUO DE ARMAS DE DESTRUIO MACIA, DESENVOLVIMENTO OU PRODUO DE QUMICOS OU ARMAS BIOLGICAS, QUAISQUER ATIVIDADES DESENVOLVIDAS NO MBITO DE EXPLOSIVOS NUCLEARES OU CICLOS DE COMBUSTVEL NUCLEAR INSEGURO OU PARA APOIAR ABUSOS AOS DIREITOS HUMANOS. NA EVENTUALIDADE DA OCORRNCIA DE ALGUM CONFLITO ENTRE ESTE MANUAL E A LEGISLAO APLICVEL, ESTA LTIMA PREVALECE. Este produto e os acessrios fornecidos (se aplicvel) esto marcados com CE e esto em conformidade com os padres europeus compatveis e aplicveis listados nas Diretivas RE 2014/53/UE, EMC 2014/30/UE e RoHS 2011/65/UE. 2012/19/EU (Diretiva WEEE): os produtos marcados com este smbolo no podem ser descartados como rejeitos municipais no classificados na Unio Europeia. Para a reciclagem adequada, retorne este produto ao seu fornecedor local ao comprar um novo equipamento equivalente ou descarte-o em pontos de coleta designados. Para obter mais informaes, acesse:
www.recyclethis.info CUIDADO 2006/66/EC (diretiva sobre baterias): este produto contm uma bateria que no pode ser descartada como um rejeito municipal no classificado na Unio Europeia. Refira-se documentao do produto para informaes especficas sobre baterias. A bateria marcada com este smbolo, que poder incluir letras para indicar cdmio (Cd), chumbo (Pb) ou mercrio (Hg). Para a reciclagem adequada, devolva a bateria ao fornecedor ou encaminhe-a a um ponto de coleta designado. Para obter mais informaes, acesse:
www.recyclethis.info Ao usar este produto, necessrio seguir os regulamentos de segurana eltrica da nao e regio. O equipamento no dever ficar exposto a gotas ou respingos e nenhum objeto com lquido, como um vaso, dever ser colocado no equipamento. A sada da tomada dever ser instalada perto do equipamento e ser facilmente acessvel. Certifique-se de que a fiao dos terminais est correta para conexo corrente eltrica CA. CUIDADOS COM A BATERIA indica parte sob tenso, e o cabeamento externo conectado aos terminais requer a instalao por uma pessoa treinada. O equipamento foi projetado para, quando necessrio, ser modificado para conexo a um sistema de distribuio de energia de TI. Nenhuma fonte de chama desprotegida, como vela acesa, deve ser colocada sobre o equipamento. A porta de srie do equipamento usada apenas para depurao. Este equipamento no adequado para uso em locais onde possa haver crianas. Instale o equipamento de acordo com as instrues neste manual. Para prevenir leses, este equipamento deve ser fixado de forma segura ao piso/parede, de acordo com as instrues de instalao. Para evitar possveis danos audio, no oua em nveis de volume altos por longos perodos. A fora adicional deve ser igual a trs vezes o peso do equipamento, mas no inferior a 50 N. O equipamento e seus recursos de montagem associados devem permanecer seguros durante a instalao. Aps a instalao, o equipamento, incluindo qualquer placa de montagem associada, no pode estar danificado. 1. Este equipamento no adequado para uso em locais onde possa haver crianas. 2. CUIDADO: H risco de exploso se a bateria for substituda por outra de tipo incorreto. 3. A substituio de uma bateria por outra de tipo incorreto pode anular uma proteo ou garantia (p. ex., no caso de alguns tipos de bateria de ltio). 4. No descarte as baterias em fogo ou forno quente nem as submeta a esmagamento ou corte mecnico, pois isso pode resultar em exploso. 5. No deixe as baterias em um ambiente de temperatura extremamente alta, pois isso pode resultar em exploso ou vazamento de lquido ou gs inflamvel. 6. No exponha as baterias a uma presso do ar extremamente baixa, pois isso pode resultar em exploso ou vazamento de lquido ou gs inflamvel. 7. Descarte as baterias usadas de acordo com as instrues. 8. + identifica o(s) terminal(is) positivo(s) de equipamentos que utilizam ou que geram corrente contnua. - identifica o(s) terminal(is) negativo(s) de equipamentos que utilizam ou que geram corrente contnua. 9. identifica o prprio encaixe da bateria e o posicionamento das clulas dentro dele. 2022 Hangzhou Hikvision Digital Technology Co., Ltd. Vse pravice pridrane. O tem prironiku Prironik vsebuje navodila za uporabo izdelka in upravljanje z njim. Slike, razpredelnice, podobe in druge informacije v njem sluijo zgolj opisovanju in pojasnjevanju. Informacije v prironiku se lahko zaradi sistemskoprogramskih posodobitev ali drugih razlogov spremenijo brez predhodnega obvestila. Najnoveja razliica tega prironika je na voljo na spletnem mestu Hikvision (https://www.hikvision.com/). Preberite ta prironik, ki vsebuje navodila in pomo strokovnjakov, usposobljenih za delo z izdelkom. Blagovne znamke ter drugih znamk in logotipov drube Hikvision so last drube Hikvision v razlinih pristojnostih. Druge navedene blagovne znamke in logotipi so last njihovih zadevnih lastnikov. Izjava o omejitvi odgovornosti TA PRIRONIK IN OPISANI IZDELEK JE SKUPAJ S STROJNO IN PROGRAMSKO OPREMO TER VDELANO PROGRAMSKO OPREMO V NAJVEJI MONI MERI, KI JO DOVOLJUJE VELJAVNA ZAKONODAJA, PRIKAZAN, TAKEN, KOT JE, IN Z VSEMI OKVARAMI IN NAPAKAMI. DRUBA HIKVISION NE PODELJUJE NOBENIH JAMSTEV, TAKO IZRECNIH KOT IMPLICITNIH IN NE DOLOA OMEJITEV, USTREZNE KAKOVOSTI ALI PRIMERNOSTI ZA DOLOEN NAMEN. IZDELEK UPORABLJATE NA LASTNO TVEGANJE. DRUBA HIKVISION V NOBENEM PRIMERU NE ODGOVARJA ZA KAKRNO KOLI POSEBNO, POSLEDINO, NAKLJUNO ALI POSREDNO KODO, MED DRUGIM VKLJUNO S KODO, NASTALO ZARADI IZGUBE POSLOVNEGA DOBIKA, PREKINITVE POSLOVANJA ALI IZGUBE PODATKOV, OKVAR SISTEMOV ALI IZGUBE DOKUMENTACIJE, KRITVE POGODBE, KODNEGA DEJANJA (VKLJUNO Z MALOMARNOSTJO), ODGOVORNOSTJO ZA IZDELEK ALI KODO, NASTALO V ZVEZI Z UPORABO TEGA IZDELKA, TUDI E JE BILA DRUBA HIKVISION OBVEENA O MONOSTI TAKE KODE. STRINJATE SE, DA INTERNET SAM PO SEBI PREDSTAVLJA VARNOSTNA TVEGANJA, IN DRUBA HIKVISION NE PREVZEMA NOBENIH ODGOVORNOSTI ZA NENAVADNO DELOVANJE, RAZKRIVANJE OSEBNIH PODATKOV ALI DRUGO KODO, NASTALO ZARADI KIBERNETSKEGA NAPADA, NAPADA HEKERJA, OKUBE Z VIRUSOM ALI DRUGIH INTERNETNIH VARNOSTNIH TVEGANJ; KLJUB TEMU PA DRUBA HIKVISION PO POTREBI NUDI PRAVOASNO TEHNINO PODPORO. STRINJATE SE, DA BOSTE IZDELEK UPORABLJALI V SKLADU Z VELJAVNO ZAKONODAJO IN DA STE SAMI ODGOVORNI, DA BOSTE IZDELEK UPORABLJALI NA NAIN, KI JE SKLADEN Z VELJAVNO ZAKONODAJO. PRAV TAKO STE ODGOVORNI, DA BOSTE IZDELEK UPORABLJALI NA NAIN, KI NE KRI PRAVIC TRETJIH OSEB, VKLJUNO S PRAVICAMI JAVNOSTI, PRAVICAMI INTELEKTUALNE LASTNINE IN PRAVICAMI ZA VAROVANJE PODATKOV IN DRUGIMI OSEBNIMI PRAVICAMI, A NE OMEJENO NANJE. TEGA IZDELKA NI DOVOLJENO UPORABLJATI ZA KATERO KOLI OD PREPOVEDANIH UPORAB, VKLJUNO Z RAZVOJEM ALI PROIZVODNJO OROJA ZA MNOINO UNIENJE, RAZVOJEM ALI PROIZVODNJO KEMINIH OZ. BIOLOKIH OROIJ, VSEMI DEJAVNOSTMI, POVEZANIMI Z JEDRSKIMI EKSPLOZIVNIMI TELESI ALI NEVARNIMI JEDRSKIMI GORILNIMI CELICAMI OZ. ZA ZLORABO LOVEKOVIH PRAVIC. V PRIMERU NESKLADJA MED TEM PRIRONIKOM IN VELJAVNIMI PRAVNIMI PREDPISI VELJAJO SLEDNJI. Ta izdelek in priloeni dodatki (e so na voljo) so oznaeni z oznako CE in so tako skladni z ustreznimi usklajenimi evropskimi standardi, ki jih navajajo Direktiva RE 2014/53/EU, Direktiva EMC 2014/30/EU in Direktiva RoHS 2011/65/EU. 2012/19/EU (direktiva OEEO): Izdelkov, oznaenih s tem simbolom, v Evropski uniji ni mogoe odstraniti kot nesortirane komunalne odpadke. Za pravilno recikliranje vrnite izdelek vaemu lokalnemu dobavitelju ob nakupu enakovredne nove opreme ali ga odnesite na za to doloeno zbirno mesto. Ve informacij najdete na spletnem mestu: www.recyclethis.info. 2006/66/EC (direktiva o baterijah): Ta izdelek vsebuje baterijo, ki je v Evropski uniji ni mogoe odstraniti kot nesortiran komunalni odpadek. Za podatke o baterijah glejte dokumentacijo izdelka. Baterija je oznaena s tem simbolom, ki lahko vkljuuje napis za oznaevanje kadmija (Cd), svinca (Pb) ali ivega srebra (Hg). Za pravilno recikliranje baterijo vrnite dobavitelju ali na doloeno zbirno mesto. Ve informacij najdete na spletnem mestu: www.recyclethis.info. POZOR Pri uporabi izdelka morate biti strogo v skladu z narodnimi in regijskimi predpisi elektrine varnosti. Oprema ne sme biti izpostavljena kapljanju ali pljuskanju in na opremo ne smete postavljati predmetov, napolnjenih s tekoino, kot so vaze. Elektrina vtinica mora biti nameena v bliini opreme in lahko dostopna. Poskrbite za pravilno oienje terminalov za prikljuitev na elektrino omreje z izmeninim tokom. OPREZ POZOR! BATERIJA oznauje nevarno napetost in zunanje oienje, prikljueno na terminale, zahteva namestitev s strani usposobljene osebe. Oprema je bila po potrebi zasnovana, prilagojena za priklop na IT-sistem za distribucijo elektrine energije. Na opremo ne smete postavljati virov odprtega ognja, kot so prigane svee. Serijska vrata opreme se uporabljajo samo za odpravljanje napak. Ta oprema ni primerna za uporabo na obmojih, kjer se bodo verjetno zadrevali otroci. Opremo namestite v skladu z navodili v tem prironiku. Da prepreite pokodbe, mora biti oprema trdno nameena na tla/steno v skladu z navodili za namestitev. Da prepreite morebitno pokodbo sluha, ne posluajte vsebine pri visoki glasnosti dlje asa. Dodatna sila mora biti enaka trikratni tei opreme, vendar ne manja od 50 N. Poskrbite, da med namestitvijo ne pokodujete opreme in priloenih vgradnih pripomokov. Po konani namestitvi pazite, da ne pokodujete opreme in morebitne vgradne ploe. 1. Ta oprema ni primerna za uporabo na obmojih, kjer se bodo verjetno zadrevali otroci. 2. POZOR: V primeru, da baterijo zamenjate z nepravilno vrsto baterije, obstaja nevarnost eksplozije. 3. Nepravilna menjava baterij z nepravilnim tipom lahko onemogoi delovanje varovala (npr. pri doloenih tipih litijevih baterij). 4. Baterij ne meite v ogenj ali vroo peico, ne drobite jih in jih ne reite, saj lahko eksplodirajo. 5. Baterij ne puajte v okolju, v katerem so prisotne izjemno visoke temperature, saj lahko pride do eksplozije ali puanja vnetljive tekoine ali plina. 6. Baterij ne puajte v okolju, v katerem je prisoten izjemno nizek zrani tlak, saj lahko pride do eksplozije ali puanja vnetljive tekoine ali plina. 7. Uporabljene baterije odstranite v skladu z navodili proizvajalca. 8. + prepozna pozitivne sponke opreme, primerne za uporabo ali proizvodnjo enosmernega toka. prepozna negativne sponke opreme, primerne za uporabo ali proizvodnjo enosmernega toka. 9. oznauje samo dralo za baterije in oznauje poloaj celic(e) v dralu za baterije. 2022 Hangzhou Hikvision Digital Technology Co., Ltd. Sva prava zadrana. O ovom Priruniku Ovaj Prirunik sadri uputstva za korienje ovog proizvoda i upravljanje njime. Slike, grafikoni fotografije i sve ostale informacije sadrane u ovom dokumentu imaju iskljuivo ulogu opisa i objanjenja. Informacije sadrane u Priruniku mogu da se menjaju, bez najave, u skladu sa auriranjem firmvera i iz drugih razloga. Najnoviju verziju ovog Prirunika moete nai na Hikvision-ovom veb-sajtu
(https://www.hikvision.com/). Ovaj Prirunik koristite uz savete i pomo od strane profesionalaca obuenih za podrku proizvodu. Robne marke i drugi igovi i logotipi kompanije Hikvision su vlasnitvo kompanije Hikvision na raznim teritorijama. Drugi igovi i logotipi pomenuti u nastavku vlasnitvo su svojih odgovarajuih vlasnika. Odricanje odgovornosti U MERI U KOJOJ JE TO DOZVOLJENO VAEIM ZAKONOM, OVAJ PRIRUNIK I OPISANI PROIZVOD, SA PRIPADAJUIM HARDVEROM, SOFTVEROM I FIRMVEROM, ISPORUUJU SE KAKVI JESU I SA SVIM KVAROVIMA I MANAMA. HIKVISION NE DAJE NIKAKVE GARANCIJE, IZRIITE ILI PODRAZUMEVANE, UKLJUUJUI, ALI NE OGRANIAVAJUI SE NA TRINI POTENCIJAL, ZADOVOLJAVAJUI KVALITET, ILI PODESNOST ZA ODGOVARAJUE SVRHE. OVAJ PROIZVOD KORISTITE NA SOPSTVENI RIZIK. KOMPANIJA HIKVISION NI U KOM SLUAJU NEE IMATI ODGOVORNOST PREMA VAMA U SLUAJU BILO KAKVE POSEBNE, POSLEDINE, SLUAJNO NANETE ILI INDIREKTNE TETE, UKLJUUJUI, IZMEU OSTALOG, GUBITAK POSLOVNOG PROFITA, PREKID POSLOVANJA, GUBITAK PODATAKA ILI DOKUMENTACIJE, SISTEMSKIH KVAROVA, BILO DA SE ZASNIVAJU NA KRENJU UGOVORA, DELIKTU (UKLJUUJUI NEMAR), ODGOVORNOSTI ZA KVALITET PROIZVODA, ILI SU NA DRUGI NAIN VEZANI ZA KORIENJE OVOG PROIZVODA, AK I AKO JE KOMPANIJA HIKVISION BILA OBAVETENA O MOGUNOSTI TAKVE TETE ILI GUBITKA. POTVRUJETE DA STE SVESNI INJENICE DA UPOTREBA INTERNETA PO PRIRODI PODRAZUMEVA ODREENE BEZBEDNOSNE RIZIKE, STOGA HIKVISION NEE SNOSITI NIKAKVU ODGOVORNOST ZA NEPRAVILAN RAD, NARUAVANJE PRIVATNOSTI, NITI ZA DRUGU TETU KOJA NASTANE USLED VISOKOTEHNOLOKOG NAPADA, HAKERSKOG NAPADA, ZARAZE VIRUSOM ILI DRUGOG VIDA NARUAVANJA BEZBEDNOSTI NA INTERNETU; S DRUGE STRANE, HIKVISION E PO POTREBI PRUITI PRAVOVREMENU TEHNIKU PODRKU. SLAETE SE SA UPOTREBOM OVOG PROIZVODA U SKLADU SA SVIM VAEIM ZAKONIMA, I ISKLJUIVO VI STE ODGOVORNI ZA UPOTREBU PROIZVODA U SKLADU SA VAEIM ZAKONOM. NAROITO STE ODGOVORNI DA OVAJ PROIZVOD KORISTITE TAKO DA TO NE NARUAVA PRAVA TREIH STRANA, UKLJUUJUI, ALI NE OGRANIAVAJUI SE NA PRAVA PUBLICITETA, INTELEKTUALNE SVOJINE ILI ZATITE PODATAKA, I DRUGA PRAVA VEZANA ZA PRIVATNOST. OVAJ PROIZVOD NE SMETE KORISTITI NI U KAKVE ZABRANJENE KRAJNJE SVRHE, UKLJUUJUI RAZVOJ ILI PROIZVODNJU ORUJA ZA MASOVNO UNITENJE, RAZVOJ ILI PROIZVODNJU HEMIJSKOG ILI BIOLOKOG ORUJA, BILO KAKVE AKTIVNOSTI U VEZI SA NUKLEARNIM EKSPLOZIVIMA ILI RIZINIM CIKLUSOM NUKLEARNOG GORIVA, ILI U VEZI SA POVREDOM LJUDSKIH PRAVA. U SLUAJU SUKOBA IZMEU OVOG PRIRUNIKA I VAEEG ZAKONA, POTONJI IMA PREDNOST. Ovaj proizvod i ako je primenjivo sa njim dostavljena dodatna oprema nose oznaku CE i u skladu s tim su usklaeni sa odgovarajuim harmonizovanim evropskim standardima navedenim u Direktivi za radio-opremu 2014/53/EU, Direktivi za elektromagnetsku kompatibilnost 2014/30/EU i Direktivi za primenu opasnih supstanci u elektrinoj i elektronskoj opremi 2011/65/EU. 2012/19/EU (Direktiva za otpadnu elektrinu i elektronsku opremu): Proizvodi koji poseduju ovaj simbol ne smeju da se odlau kao neklasirani komunalni otpad u Evropskoj uniji. Da bi bio pravilno recikliran, vratite ovaj proizvod lokalnom distributeru kada kupite ekvivalentni novi ili ga odnesite na zvanino reciklano prikupljalite. Za vie informacija posetite: www.recyclethis.info. 2006/66/EC (direktiva za baterije): Ovaj proizvod sadri bateriju koja ne sme da se odlae kao neklasirani komunalni otpad u Evropskoj uniji. Konkretne informacije o bateriji potraite u dokumentaciji proizvoda. Baterija poseduje ovaj simbol, na kom mogu da se nau slovne oznake koje oznaavaju prisustvo kadmijuma (Cd), olova (Pb) ili ive (Hg). Da bi bila pravilno reciklirana, vratite bateriju dobavljau ili je odnesite na zvanino reciklano prikupljalite. Za vie informacija posetite: www.recyclethis.info. Tokom korienja proizvoda morate strogo da potujete zakone i propise koji se odnose na elektrinu bezbednost, a koji vae u vaoj dravi i podruju. Oprema ne sme biti izloena kapanju ili prskanju, a na nju se ne smeju stavljati predmeti koji sadre tenost, poput vaza. Utinica mora biti instalirana blizu opreme i mora biti lako dostupna. Terminali moraju biti ispravno oieni za prikljuenje na izvor naizmenine struje. oznaava opasnost po ivot, a eksterno oienje povezano sa terminalima mora instalirati za to obuena osoba. Oprema je dizajnirana tako da se po potrebi moe modifikovati za povezivanje na IT sistem za distribuciju elektrine energije. Na opremu se ne smeju stavljati izvori otvorenog plamena, poput upaljenih svea. Serijski port opreme koristi se samo za otklanjanje greaka. Ova oprema nije pogodna za upotrebu na mestima na kojima borave deca. Instalirajte opremu u skladu sa uputstvima u ovom priruniku. Da ne bi dolo do fizikih povreda, ova oprema mora biti propisno privrena za pod/zid u skladu sa uputstvima za instalaciju. Da ne bi dolo do oteenja sluha, ne sluajte preglasno tokom dugog vremenskog perioda. Dodatna sila treba da bude jednaka trostrukoj teini opreme, ali ne manja od 50 N. Oprema i odgovarajui pribor za postavljanje treba da budu privreni tokom postavljanja. Posle postavljanja, oprema i ploa za postavljanje koju ste moda koristili ne smeju da budu oteene. 1. Ova oprema nije pogodna za upotrebu na mestima na kojima borave deca. 2. OPREZ: Moe doi do eksplozije ako se baterija zameni neodgovarajuim tipom. 3. Zamena baterije neodgovarajuim tipom moe ponititi zatitnu meru (na primer, kod nekih tipova litijumskih baterija). 4. Nemojte bateriju odlagati u vatru ili vruu penicu, niti je mehaniki drobiti ili sei, jer to moe dovesti do eksplozije. 5. Nemojte ostavljati bateriju u okruenjima sa ekstremno visokom temperaturom, jer to moe dovesti do eksplozije ili curenja zapaljive tenosti ili gasa. 6. Nemojte izlagati bateriju ekstremno niskom vazdunom pritisku, jer to moe dovesti do eksplozije ili curenja zapaljive tenosti ili gasa. 7. Istroene baterije odloite u skladu sa uputstvima. 8. + identifikuje pozitivni/-e terminal/-e opreme sa kojom se koristi, ili generie jednosmernu struju. - identifikuje negativni/-e terminal/-e opreme sa kojom se koristi, ili generie jednosmernu struju. 9. identifikuje samo kuite za baterije i poloaj elije/-a unutar njega. UPOZORENJA O BATERIJI HEBREW
.3
.6
.2
.5 1
.1
.4 2
. .1
. .2
. .3
. .4
. .5
(. ) .6
. .7
. .8 3
.Hik-Connect Hik-ProConnect AX PRO .1
.AX PRO .2 4 4
, , 46 ,120 ,1 32
,(1500) ,(3000)
(200) 433 MHz 48 6
( ) 8 4 48 16- PIRCAM 48 ) 96
() 5 ,() 96 Hik-Connect/Hik-ProConnect/Web Portal/IVMS4200/Convergence Cloud 3/4G ,Wi-Fi , SIA DC09 (SIA level 2, Contact ID), ISUP, ISAPI (SDK), CSV-IP, FSK Module Hik-IP Receiver & Hik-IP Receiver Pro
(Sur-Gard & Ademco 685) 0.66A - 0.3A, 50/60 Hz, 100 - 240V~
36 ,( ) 12v 7Ah 40 C -10 C
" 86.4 " 199 " 261
( ) 1083 ARC SIM
. .Hangzhou Hikvision Digital Technology Co., Ltd 2022
.(https://www.hikvision.com/) Hikvision
. Hikvision Hikvision
. , , , , HIKVISION ."
, , HIKVISION .
, , , , , , HIKVISION , ,( ) ,
, HIKVISION HIKVISION , ; , ,
. , i
"CE" - -
.RoHS 2011/65/EU EMC 2014/30/EU ,RE 2014/53/EU
, . , :(WEEE) EU/2012/19
.www.recyclethis.info : , . , . :() EC/2006/66
.(Hg) ,(Pb) ,(Cd) , , . www.recyclethis.info : , . ,
.50N -
. , , . .1
. , : .2
.( ,) .3
. , .4
. .5
. .6
. .7
- . + .8
. 9
1 2 | Label | ID Label/Location Info | 145.22 KiB | May 19 2022 |
Model: DS-PWA96-M2H-WB. UP: 100-240V~50/60H2,0.66-0.3A SN: C12345678 UVTI ME HA, nz Made in Cl FCC ID:2ADTD-CP03029601219 03/2022 AU contains FCC ID:2AJYU-8PYA002 Manufacturer: Hangzhou Hikvision Digital Technology Co.,Ltd. Address: No.555 Gianmo Road, Binjiang District, Hangzhou 310052, China HIKVISION AX PRO a { iO]
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) this device must accept any interference received, including interference that may cause undesired operation.
1 2 | Applicant Declaration Letter | Cover Letter(s) | 117.91 KiB | May 19 2022 |
a) b) c) d) e) f) g) SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Hangzhou Hikvision Digital Technology Co., Ltd. No. 555 Qianmo Road, Binjiang District Hangzhou 310052, China Address Grantee Code FCC ID Contact Email Contact Phone Authorized Contact Name Long Cheng 2ADTD 2ADTD-CP03029601219 chenglong6@hikvision.com
+8618969187825 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;
in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:
labeling the equipment with the exact FCC ID as specified in this application,
(1)
(2) compliance statement labeling pursuant to the applicable rules,
(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.
(1)
(2)
(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Date:2022/06/07 Applicant Signature:
Print Name:
Title:
*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Long Cheng Testing & Certification Engineer Applicant Declaration Rev:0.0
1 2 | Auth letter | Cover Letter(s) | 27.37 KiB | May 19 2022 |
Hangzhou Hikvision Digital Technology Co., Ltd. TO:
Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Date: 2022-05-07 Regarding: FCC ID: 2ADTD-CP03029601219 To whom it may concern:
We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Hangzhou Hikvision Digital Technology Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Long Cheng Signature:
On behalf of Company: Hangzhou Hikvision Digital Technology Co., Ltd. Telephone: +8618969187825 Title: Testing & Certification Engineer
1 2 | Confidentiality FCC | Cover Letter(s) | 86.71 KiB | May 19 2022 |
Confidentiality Request regarding application for FCC ID: 2ADTD-CP03029601219 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Hangzhou Hikvision Digital Technology Co., Ltd. To:
From: Hangzhou Hikvision Digital Technology Co., Ltd. No. 555 Qianmo Road, Binjiang District, angzhou 310052, China Regarding:
LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature:
Printed Name (on file with the FCC associated with the Grantee Code): Long Cheng Title: Testing & Certification Engineer Company Name: Hangzhou Hikvision Digital Technology Co., Ltd.
1 2 | MCL | Cover Letter(s) | 121.74 KiB | May 19 2022 |
Hangzhou Hikvision Digital Technology Co., Ltd. Current Date: 2022-05-07 To:
SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. No. 588 West Jindu Road, Songjiang District, Shanghai, China. 201612 Dear Sir/Madam, Subject: Declaration Letter about Identity of Products
*WE (Hangzhou Hikvision Digital Technology Co., Ltd.) HEREBY DECLARED THAT Product Description AX PRO Model No. DS-PWA96-M2H-WBUHK,DS-PWA96-M2H-WBCKV,DS-PWA96-M2H-WB Manufacturers Name Hangzhou Hikvision Digital Technology Co., Ltd. UVS,DS-PWA96-M2H-WBKVO,DS-PWA96-M2H-WBHUN Manufacturers Address No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
*Except that the model number, trade name, color and appearance deviation, are identical with the original product as follows:
Note:
The definition of identical should be electrically identical. A device will be considered to be electrically identical if no changes are made to the devices schematics, board layouts, component layouts, chip sets, resistors and all other electrical aspects of the device are identical. with the model(s) below which samples we chose to be tested by SGS Model No. ():
DS-PWA96-M2H-WB Manufacturers Name ():
Hangzhou Hikvision Digital Technology Co., Ltd. Manufacturers Address):
No.555 Qianmo Road, Binjiang District, Hangzhou Sincerely, Signature ():
310052, China Printed Name ():
Long Cheng Position/Title ():
Testing & Certification Engineer Contact Number ():
+8618969187825
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2022-05-19 | 434.6 ~ 434.6 | DSC - Part 15 Security/Remote Control Transmitter | Original Equipment |
2 | 2422 ~ 2452 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2022-05-19
|
||||
1 2 | Applicant's complete, legal business name |
Hangzhou Hikvision Digital Technology Co., Ltd.
|
||||
1 2 | FCC Registration Number (FRN) |
0024149825
|
||||
1 2 | Physical Address |
No. 555 Qianmo Road, Binjiang District
|
||||
1 2 |
Hangzhou, N/A
|
|||||
1 2 |
China
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
U******@SGS.COM
|
||||
1 2 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
1 2 |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
app s | FCC ID | |||||
1 2 | Grantee Code |
2ADTD
|
||||
1 2 | Equipment Product Code |
CP03029601219
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
L**** C********
|
||||
1 2 | Telephone Number |
+8618********
|
||||
1 2 | Fax Number |
+86-5********
|
||||
1 2 |
c******@hikvision.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd.
|
||||
1 2 | Name |
P****** Z******
|
||||
1 2 | Physical Address |
588 West Jindu Road, Xinqiao, Songjiang
|
||||
1 2 |
ShangHai, 201612
|
|||||
1 2 |
China
|
|||||
1 2 | Telephone Number |
+8621********
|
||||
1 2 | Fax Number |
02161********
|
||||
1 2 |
P******@sgs.com
|
|||||
app s | Non Technical Contact | |||||
1 2 | Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd.
|
||||
1 2 | Name |
P**** Z******
|
||||
1 2 | Physical Address |
588 West Jindu Road, Xinqiao, Songjiang
|
||||
1 2 |
ShangHai, 201612
|
|||||
1 2 |
China
|
|||||
1 2 | Telephone Number |
+8621********
|
||||
1 2 | Fax Number |
02161********
|
||||
1 2 |
P******@sgs.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DSC - Part 15 Security/Remote Control Transmitter | ||||
1 2 | DTS - Digital Transmission System | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | AX PRO | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | This device includes a granted single modules (2AJYU-8PYA002). The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 2 | Power Output listed is conducted. This device includes a granted single modules (FCC ID: 2AJYU-8PYA002). The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40MHz bandwidth mode. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Compliance Certification Services (Kunshan) Inc.
|
||||
1 2 | Name |
J**** C******
|
||||
1 2 | Telephone Number |
+ 86-******** Extension:
|
||||
1 2 |
J******@sgs.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15.231 | CC | 433.1 | 433.7 | ||||||||||||||||||||||||||||||||||||
1 | 2 | 15.231 | CC | 434.6 | 434.6 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC MO | 2412 | 2462 | 0.053 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15C | CC MO | 2422 | 2452 | 0.05 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC