B Parts Introducon C Installaon D Mobile Phone Connecon E Basic Descripon F Cauons A Packing List 1. Dashcam 1 2. Car Charger 1 3. Power Cord 1 4. Electrostac Film 1 5. User Manual 1 Clean the windshield and paste the electrostac lm onto it. Avoid introducing air bubble. DO NOT paste the lm repeatedly. Suggested Posion:
The center omage as close as possible to the center line ohe front Paste the device onto the electrostac lm and route cable to the disater box for power supply. The device interf aces shoul d be installe d to the righor easi er power cord connec on. HikDashcam D1 User Manual 1. Lens 2. Loudspeaker 3. TF Card Slot 4. USB Interface 5. 3M Tape 6. Microphone 7. Power Buon 8. Reset Buon Hold the power buon to restore the device to factory sengs. Press the power buon to switch between AR mode and Wi-Fi mode. Plug car charger into the cigaree lighter, and plug the power cord into the USB interface. Adjushe angle to the target direcon. Start Up &Shu tdown Conneche power cord to the car baery. Device starts recording automacally once the car starts. Device powers o when the car stalls. Recording Recordings are divided to ordinary video and emergency video. You can sehe video voice on/o via System Sengs or Hikdashcam APP. Scan the QR code to download and install HikDashcam app. Specicaons Add the dashcam to the app. a. Run the HikDashcam app. b. Tap Wi-Fi Connecon. c. In Wi-Fi list, seleche Wi-Fi SSID ohe target dashcam and enter Wi-Fi password to build connecon. You can sehe parameters ohe dashcam. For iOS, you need to go to Wi-Fi settings of your phone to connect to the Wi-Fi of dashcam. If Wi-Fi cannot be searched, please press power buon to switch to Wi-Fi mode. Model Aperture Pixel AE-DC2018-D1 F2.0 200 W Max. Resoluon 1080P @ 30fps Angle Storage G-Sensor Wi-Fi Sound Recording Power Supply Power Consumpon Horizontal: 102, Diagonal: 56 TF card, 16 GB to 128 GB Built-in, collision triggered recording and recording lock Yes Yes 5 VDC, 1.5 A Approx. 3.5 W Operang Temperature and Humidity
.sselro%59ytidimuH.)F851otF4-(C07otC02-
Installaon Type Dimensions (L W H) Weight General 77 32 35 mm (3.03 1.26 1.38) Approx. 100 g(0.22 lb.) Scan QR Code 1 2 Dashcam Wi-Fi default parameters:
Wi-Fi SSID: HIKVISION-D1-XXXX
(XXXX refers to the lasour characters of vericaon code.) Wi-Fi password: 1234567890
(To edit password, please go to the Sengs page.) Safety Instrucon These instrucons are intended to ensure that users can use the product correctly to avoid danger or property loss. Cauons: Injury or equipment damage may occur if any ohe cauons are neglected. In the use ohe dashcam, you must be in strict compliance with the local laws and regulaons. You are recommended to install the dashcam on the locaon of rear mirror to ensure the dashcam can record with the best surveillance view. DO NOT install the dashcam on the locaon that will block the drivers sight. Keep the user manual properly for future reference. See inial connecon of dashcam in user manual. Purchase the TF card from legal channel. To ensure safe and stable data storage, is recommended to use TF card of Class 10 or above. Formahe new TF card rst before using the card. To protect TF card from damage, shut down the dashcam before installing and uninstalling TF card. Ihe dashcam is directly connected with the vehicle power system, you are recommended to power o the dashcam when the engine is o. Disconnect cigaree lighter to avoid insucient voltage and abnormal startup. Reconnect cigaree lighter to ensure dashcam work normally when you starhe car again. oT.)F851otF4-(C07otC02-morfsierutarepmetgnitarepO proteche dashcam, DO NOT use in high temperature, low temperature, or high-humidity environment. Keep the dashcam from rain and dust. The manual is subjeco update. The funcons of dashcam may vary according to dierent models.
*The driving assistance funcon ohe device only sends alarm or warning to the driver and cannot replace the drivers judgement and operaon. With the device, you also should drive carefully to avoid trac accident or violaon. Pedestrian or object recognion failure or recognion error may occur due to external factors. DO NOT overly rely on the driving assistance funcon. G Troubleshoong G Troubleshoong H Legal Statement H Legal Statement I Regulatory Informaon I Regulatory Informaon I Regulatory Informaon Trouble The mobile phone cannot display recordings. Wi-Fi connecon takes alon g me. Trouble Soluon The dashcam drops easily. Clean the windshield before installaon. Check whether the 3M tape is tightly sticked to the electrostatic film before the installation. Starng the dashcam failed. The dashcam powers off easily. Recording is abnormal and indicator is unlit. Recording is blurred. Wi-Fi cannot be searched. Dashcam reboots itself. Check whether the vehicle is started and power supply is normal. Check whether the car charger is ghtly connected. Press "RESET" to reboot device. Restore to defaults: hold the RESET button unl the startup music is heard. Make sure the power cord is in good condion. Make sure the power cord is ghtly connected to the according interfaces. Make sure thahe dashcam started up successfully. Check whether the TF card is inserted. Check the status of TF card, e.g. its format, its lifespan. Change TF card is not well. Make sure the protecve lm is peeled off. Check whether the windshield or the lens of dashcam is blurred. Check whether the device is in Wi-Fi mode. Wi-Fi connecon is available for Android phones. Connect Wi-Fi through System->Wi-Fi (dierent entries for dierent phone models). Check whether the car charger is ghtly connected. Mobile phone cannot conneco dashcam. Make sure HikDashcam app is installed. Please restarhe dashcam to the app. Soluon 2022 Hangzhou HikAuto Technology Co., Ltd. All rights reserved. It may be relevant with the player or system ohe phone. Please connect TF card to your computer and display the recordings. It may be caused by the interferrence ohe surrounding Wi-Fi signals. Please use the dashcam in an environment oess interferrence. Shut down unnecessary programs in your phone to release some resources for HikDashcam app and reconnect Wi-Fi. Abouhis Manual The Manual includes instrucons for using and managing the Product. Pictures, charts, images and all other informaon hereinaer are for descripon and explanaon only. The informaon contained in the Manual is subjeco change, without noce, due to rmware updates or other reasons. Trademarks and other Hikvision's trademarks and logos are the properes of Hikvision in various jurisdicons. Other trademarks and logos menoned are the properes of their respecve owners. Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL FAULTS AND ERRORS. HIKAUTO MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKAUTO BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKAUTO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKAUTO SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKAUTO WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. FCC Informaon Please take attenon that changes or modicaon not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for aClass Bdigit al device, pursuano part 15 ohe FCC Rules. These limits are designed to provide reasonable protecon against harmful interference when the equipmens operated in a residenal environment. This equipment generates, uses and can radiate radio frequency energy and, if nonstalled and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in aparcular installaon. Ihis equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment off and on, the user is encouraged to try to correche interference by one or more ohe following measures:
Reorient or relocate the receiving antenna. Increase the separaon between the equipment and receiver. Conneche equipmennto an outlet on acir cuit dif ferenrom that to which the receiver is connected. Consulhe dealer or an experienced radio/TV technician for help FCC Condions This device complies with part 15 ohe FCC Rules. Operaon is subject to the following two condions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operaon. The equipment should be installed and operated with aminimum distance 20 cm between the radiator and your body. EU Conformity Statement This product and -if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the RE Direcve 2014/53/EU, the EMC Direcve 2014/30/EU, the LVD Direcve 2014/35/EU, the RoHS Direcve 2011/65/EU. 2012/19/EU (WEEE direcve): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this produco your local supplier upon the purchase of equivalent new equipment, or dispose ot at designated collecon points. For more informaon see:
www.recyclethis.info. 2006/66/EC (battery direcve): This product contains aba ttery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentaon for specic battery informaon. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to adesigna ted collecon point. For more informaon see: www.recyclethis.info. Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements. This device complies with Industry Canada licence-exempt RSS standard(s). Operaon is subjeco the following two condions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operaon ohe device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitaon est autorise aux deux condions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'ulisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est suscepble d'en compromettre le fonconnement. Under Industry Canada regulaons, this radio transmitter may only operate using an antenna of atype and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potenal radio interference to other users, the antenna type and its gain should be so chosen thahe equivalensotropically radiated power (e.i.r.p.) is not more than that necessary for successful communicaon. Conformment la rglementaon d'Industrie Canada, le prsent metteur radio peut fonconner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intenon des autres ulisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communicaon sasfaisante. This equipment should be installed and operated with aminimum distance 20cm between the radiator and your body. Cet quipement doit tre install et ulis une distance minimale de 20 cm entre le radiateur et votre corps. 13