all | frequencies |
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|
manuals | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual -1 | Users Manual | 854.62 KiB | April 28 2021 | |||
1 |
|
User Manual -2 | Users Manual | 851.74 KiB | April 28 2021 | |||
1 |
|
Internal Photos | Internal Photos | 1.02 MiB | April 28 2021 | |||
1 |
|
External Photos | External Photos | 410.78 KiB | April 28 2021 | |||
1 |
|
Label and Label Location | ID Label/Location Info | 2.19 MiB | April 28 2021 | |||
1 |
|
Authorization Letter | Cover Letter(s) | 380.29 KiB | April 28 2021 | |||
1 | Block Diagram | Block Diagram | April 28 2021 | confidential | ||||
1 | Circuit diagram | Schematics | April 28 2021 | confidential | ||||
1 |
|
Confidentiality Letter | Cover Letter(s) | 145.46 KiB | April 28 2021 | |||
1 |
|
Declaration Letter | Cover Letter(s) | 337.00 KiB | April 28 2021 | |||
1 | Operational Description | Operational Description | April 28 2021 | confidential | ||||
1 |
|
Test Report | Test Report | 1.06 MiB | April 28 2021 | |||
1 |
|
Test Setup Photos | Test Setup Photos | 369.85 KiB | April 28 2021 |
1 | User Manual -1 | Users Manual | 854.62 KiB | April 28 2021 |
DS-K1201A Series Fingerprint Card Reader User Manual DS-K1201 Fingerprint Card Reader User Manual 2021 Hangzhou Hikvision Digital Technology Co., Ltd. This manual is applied to fingerprint card reader. Device Name Model Fingerprint Card Reader DS-K1201AMF DS-K1201AEF It includes instructions on how to use the Product. The software embodied in the Product is governed by the user license agreement covering that Product. About this Manual The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the company website (http://overseas.hikvision.com/en/). Trademarks and other Hikvisions trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners. Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED AS IS, WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. i DS-K1201 Fingerprint Card Reader SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. Support Should you have any questions, please do not hesitate to contact your local dealer. Data Protection During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method; for fingerprint device, only fingerprint template will be saved, which is impossible to reconstruct a fingerprint image. As data controller, you are advised to collect, store, process and transfer data in accordance with the applicable data protection laws and regulations, including without limitation, conducting security controls to safeguard personal data, such as, implementing reasonable administrative and physical security controls, conduct periodic reviews and assessments of the effectiveness of your security controls. ii DS-K1201 Fingerprint Card Reader Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product iii DS-K1201 Fingerprint Card Reader documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements. Use only power supplies listed in the user instructions:
Manufacturer Model DSA-12PFT-12FUK 120100 Dee Van Enterprise Co., Ltd. BS DSA-12PFT-12FAU 120100 Dee Van Enterprise Co., Ltd. AS DSA-12PFT-12FIN 120100 Dee Van Enterprise Co., Ltd. IS DSA-12PFT-12FUS 120100 Dee Van Enterprise Co., Ltd. IEC DSA-12PFT-12 FBZ 120100 Dee Van Enterprise Co., Ltd. NBR Standard Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Warnings and Cautions:
Warnings: Neglecting any of the warnings may cause serious injury or death. Cautions: Neglecting any of the cautions may cause injury or equipment damage. Cautions Follow these precautions to prevent potential injury or material damage. Warnings Follow these safeguards to prevent serious injury or death. Warnings All the electronic operation should be strictly compliance with the electrical safety regulations, fire prevention regulations and other related regulations in your local region. Please use the power adapter, which is provided by normal company. The power consumption cannot be less than the required value. Do not connect several devices to one power adapter as adapter overload may Please make sure that the power has been disconnected before you wire, install cause over-heat or fire hazard. or dismantle the device. When the product is installed on wall or ceiling, the device shall be firmly fixed. iv DS-K1201 Fingerprint Card Reader If smoke, odors or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center. If the product does not work properly, please contact your dealer or the nearest service center. Never attempt to disassemble the device yourself. (We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.) Cautions Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage). Do not place the device in extremely hot (refer to the specification of the device for the detailed operating temperature), cold, dusty or damp locations, and do not expose it to high electromagnetic radiation. The device cover for indoor use shall be kept from rain and moisture. Exposing the equipment to direct sun light, low ventilation or heat source such as heater or radiator is forbidden (ignorance can cause fire danger). Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is not a malfunction however), and affecting the endurance of sensor at the same time. Please use the provided glove when open up the device cover, avoid direct contact with the device cover, because the acidic sweat of the fingers may erode the surface coating of the device cover. Please use a soft and dry cloth when clean inside and outside surfaces of the device cover, do not use alkaline detergents. Please keep all wrappers after unpack them for future use. In case of any failure occurred, you need to return the device to the factory with the original wrapper. Transportation without the original wrapper may result in damage on the device and lead to additional costs. Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or equivalent type only. Dispose of used batteries according to the instructions provided by the battery manufacturer. Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes. Please take care of your card and report card loss in time when card is lost. If you require a higher security level, use multiple authentication modes. Multiple card types are supported. Please select an appropriate card type according to the card performance and the usage scenarios. 0100001090812 v DS-K1201 Fingerprint Card Reader Content Chapter 1 Introduction ...................................................................................... 1 1.1 Product Overview ........................................................................................... 1 1.2 Product Appearance ....................................................................................... 1 Chapter 2 Installation........................................................................................ 2 Introduction for DIP Switch ............................................................................. 2 2.1 2.2 Definition of Cable .......................................................................................... 2 2.3 Wiring Cables .................................................................................................. 3 Installing Card Reader ..................................................................................... 3 2.4 Chapter 3 Sound Prompt and Indicator .............................................................. 5 Appendix Tips for Scanning Fingerprint ............................................................... 7 vi DS-K1201 Fingerprint Card Reader Chapter 1 Introduction 1.1 Product Overview Fingerprint and card reader is a kind of high-performance product, with a 32 bit high-speed processor. It communicates with access controller via the RS-485 protocol. And a built-in tamper-proof module helps to protect card reader from malicious damage. NFC tag anti-cloning is also supported. 1.2 Product Appearance Figure 1-1 Front View Figure 1-2 Rear View Table 1-1 Components Description No. 1 2 3 Name Fingerprint Scanner Cable Interface of RS-485, Power, LED Control, etc. DIP Switch 1 123 DS-K1201 Fingerprint Card Reader Chapter 2 Installation 2.1 Introduction for DIP Switch The DIP switch module is shown below. The No. of DIP switch from left to right is 1 to 4, representing the RS-485 address. Figure 2-1 DIP Switch Module Table 1-2 Description of DIP Switch Description 1 0 Represent ON in binary mode Represent OFF in binary mode Icon For example, the binary value of the following status is 1100. Figure 2-2 DIP Switch Module Note: The DIP switch of RS-485 address should reach the access control devices requirements. For different access control devices, the DIP switch addresses may be different. 2.2 Definition of Cable The description of 5 cables is shown below. Table 1-3 Description of Cables Color Blue Yellow Red Black Black Description RS-485 -
RS-485 +
PWR (DC +12V) GND (Power Grounding) GND (RS-485 Grounding) 2 2.3 Wiring Cables DS-K1201 Fingerprint Card Reader Purpose:
Wire the cables between the controller and the card reader, thus to establish the communication between them. Steps for RS-485 communication mode:
1. Set the DIP switch for RS-485 address. For Details, refer to 2.1 Introduction for DIP Switch. 2. Wire the cable between the controller and the card reader as shown below. Figure 2-3 Wiring for RS-485 Communication Mode 2.4 Installing Card Reader Before you start:
Set the DIP switch. For details, refer to 2.1 Introduction for DIP Switch. Steps:
1. Fix the mounting plate on the wall with 2 provided screws. Note: Do not warp the mounting plate when installing. 3 DS-K1201 Fingerprint Card Reader 2. Connect the cables between the controller and the card reader. For details, refer to 2.3 Wiring Cables. 3. Unscrew the screw at the bottom of the card reader. 4. Buckle the card reader up to the plate. 5. Fasten the card reader to the plate with the set screw. 4 DS-K1201 Fingerprint Card Reader Chapter 3 Sound Prompt and Indicator After the card reader is powered on, LED status indicator will turn green and blink for 1 time. Then it will turn red and blink for 3 times. At last the buzzer will send out a beep sound indicating the starting up process is completed. When using the card reader, it will send out different sounds prompt and the LED indicator to indicate different statuses. You can refer to tables below for detailed information. Table 1-4 Description of Prompt Sound Sound Prompt Description Swiping card prompt For Card + Fingerprint authentication: prompt for pressing the fingerprint after swiping the card. The operation of pressing keys or swiping card is valid. The operation of pressing keys or swiping card is invalid. Prompt for tamper-proof alarm. Prompt for buzzer alarm. The card reader is unencrypted. One beep Two rapid beeps Three slow beeps Rapidly continuous beeps Slowly continuous beeps 5 DS-K1201 Fingerprint Card Reader Table 1-5 Description of LED Indicator Description The card reader is power on. LED Indicator Status Green (blink for 1 time), and red (blink for 3 times) Green and blinking Solid green for 2s Solid red Red and blink for 3 times Red and blinking For Card + Fingerprint authentication:
prompt for pressing the fingerprint after swiping the card. The operation of configuring the fingerprint. The operation of swiping card is valid. Card reader is working normally. The operation of swiping card is invalid. For RS-485 protocol: Registering failed or card reader is offline. 6 DS-K1201 Fingerprint Card Reader Appendix Tips for Scanning Fingerprint Recommended Finger Forefinger, middle finger or the third finger. Correct Scanning The figure displayed below is the correct way to scan your finger:
You should press your finger on the scanner horizontally. The center of your scanned finger should align with the scanner center. Incorrect Scanning The figures of scanning fingerprint displayed below are wrong:
Vertical Edge I Side Edge II Environment The scanner should avoid direct high light, high temperature, humid conditions and rain. When it is dry, the scanner may not recognize your fingerprint successfully. You can blow your finger and scan again. Others If your fingerprint is shallow, or it is hard to scan your fingerprint, we recommend you to use other authentication methods. If you have injuries on the scanned finger, the scanner may not recognize. You can change another finger and try again. 7 8 UD22704B
1 | User Manual -2 | Users Manual | 851.74 KiB | April 28 2021 |
Fingerprint Card Reader User Manual Fingerprint Card Reader User Manual User Manual About this Manual This manual is applicable for fingerprint card reader. The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the company website. Please use this user manual under the guidance of professionals. Legal Disclaimer REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. OUR COMPANY SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, OUR COMPANY WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW. OUR COMPANY SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. Support Should you have any questions, please do not hesitate to contact your local dealer. Data Protection During the use of device, personal data will be collected, stored and processed. To protect data, our devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method; for fingerprint device, only fingerprint template will be saved, which is impossible to reconstruct a fingerprint image. As data controller, you are advised to collect, store, process and transfer data in accordance with the applicable data protection laws and regulations, including without limitation, conducting security controls to safeguard personal data, such as, implementing reasonable administrative and physical i Fingerprint Card Reader User Manual security controls, conduct periodic reviews and assessments of the effectiveness of your security controls. Regulatory Information FCC Information operate the equipment. Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the users authority to FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. ii Fingerprint Card Reader User Manual EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU. www.recyclethis.info 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see:
2006/66/EC
(battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see:
www.recyclethis.info Use only power supplies listed in the user instructions:
Model Manufacturer Standard DSA-12PFT-12FUK 120100 Dee Van Enterprise Co., Ltd. DSA-12PFT-12FAU 120100 Dee Van Enterprise Co., Ltd. BS AS iii Fingerprint Card Reader User Manual Model Manufacturer Standard DSA-12PFT-12FIN 120100 Dee Van Enterprise Co., Ltd. IS DSA-12PFT-12FUS 120100 Dee Van Enterprise Co., Ltd. IEC DSA-12PFT-12 FBZ 120100 Dee Van Enterprise Co., Ltd. NBR Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements. Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Warnings and Cautions:
Warnings: Neglecting any of the warnings may cause serious injury or death. Cautions: Neglecting any of the cautions may cause injury or equipment damage. Warnings Follow these Cautions Follow these safeguards to prevent precautions to prevent potential serious injury or death. injury or material damage. Warnings All the electronic operation should be strictly compliance with the electrical safety regulations, fire prevention regulations and other related regulations in your local region. Please use the power adapter, which is provided by normal company. The power consumption cannot be less than the required value. iv Fingerprint Card Reader User Manual Do not connect several devices to one power adapter as adapter overload may cause over-heat or fire hazard. Please make sure that the power has been disconnected before you wire, install or dismantle the device. When the product is installed on wall or ceiling, the device shall be firmly fixed. If smoke, odors or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center. If the product does not work properly, please contact your dealer or the nearest service center. Never attempt to disassemble the device yourself.
(We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.) Cautions Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage). Do not place the device in extremely hot (refer to the specification of the device for the detailed operating temperature), cold, dusty or damp locations, and do not expose it to high electromagnetic radiation. The device cover for indoor use shall be kept from rain and moisture. Exposing the equipment to direct sun light, low ventilation or heat source such as heater or radiator is forbidden (ignorance can cause fire danger). Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is not a malfunction however), and affecting the endurance of sensor at the same time. v Fingerprint Card Reader User Manual Please use the provided glove when open up the device cover, avoid direct contact with the device cover, because the acidic sweat of the fingers may erode the surface coating of the device cover. Please use a soft and dry cloth when clean inside and outside surfaces of the device cover, do not use alkaline detergents. Please keep all wrappers after unpack them for future use. In case of any failure occurred, you need to return the device to the factory with the original wrapper. Transportation without the original wrapper may result in damage on the device and lead to additional costs. Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or equivalent type only. Dispose of used batteries according to the instructions provided by the battery manufacturer. Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes. Please take care of your card and report card loss in time when card is lost. If you require a higher security level, use multiple authentication modes. Multiple card types are supported. Please select an appropriate card type according to the card performance and the usage scenarios. 0100001090812 vi Fingerprint Card Reader User Manual Content Chapter 1 Introduction ........................................................... 3 1.1 Product Overview ..................................................... 3 1.2 Product Appearance ................................................. 3 Chapter 2 Installation ............................................................. 5 2.1 Introduction for DIP Switch....................................... 5 2.2 Definition of Cable .................................................... 6 2.3 Wiring Cables ........................................................... 6 2.4 Installing Card Reader ............................................... 7 Sound Prompt and Indicator .................................. 9 Chapter 3 Appendix: Tips for Scanning Fingerprint .................................... 11 1 Fingerprint Card Reader User Manual Chapter 1 Introduction 1.1 Product Overview Fingerprint and card reader is a kind of high-performance product, with a 32 bit high-speed processor. It communicates with access controller via the RS-485 protocol. And a built-in tamper-proof module helps to protect card reader from malicious damage. NFC tag anti-cloning is also supported. 1.2 Product Appearance Figure 1-1 Front View Figure 1-2 Rear View 3 123 Fingerprint Card Reader User Manual Table 1-1 Components Description Name Fingerprint Scanner Cable Interface of RS-485, Power, LED Control, etc. DIP Switch No. 1 2 3 4 Fingerprint Card Reader User Manual Chapter 2 Installation 2.1 Introduction for DIP Switch The DIP switch module is shown below. The No. of DIP switch from left to right is 1 ~ 4, representing the RS-485 address. Figure 2-1 DIP Switch Module Table 1-2 Description of DIP Switch Description 1 0 Represent ON in binary mode Represent OFF in binary mode Icon For example, the binary value of the following status is 1100. Figure 2-2 DIP Switch Module Note: The DIP switch of RS-485 address should reach the access control devices requirements. For different access control devices, the DIP switch addresses may be different. 5 Fingerprint Card Reader User Manual 2.2 Definition of Cable The description of 5 cables is shown below. Table 1-3 Description of Cables Description Color Blue Yellow Red Black Black RS-485 -
RS-485 +
PWR (DC +12V) GND (Power Grounding) GND (RS-485 Grounding) 2.3 Wiring Cables Purpose:
Wire the cables between the controller and the card reader, thus to establish the communication between them. Steps for RS-485 communication mode:
1. Set the DIP switch for RS-485 address. For Details, refer to 2.1 Introduction for DIP Switch. Wire the cable between the controller and the card reader as shown below. 2. 6 Fingerprint Card Reader User Manual Figure 2-3 Wiring for RS-485 Communication Mode 2.4 Installing Card Reader Before you start:
Set the DIP switch. For details, refer to 2.1 Introduction for DIP Switch. Steps:
7 1. 2. 3. 4. 5. Fingerprint Card Reader User Manual Fix the mounting plate on the wall with 2 provided screws. Note: Do not warp the mounting plate when installing. Connect the cables between controller and card reader. For details, refer to 2.3 Wiring Cables. Unscrew the screw at bottom of the card reader. Buckle the card reader up to the plate. the Fasten the card reader to the plate with the set screw. 8 Fingerprint Card Reader User Manual Chapter 3 Sound Prompt and Indicator After the card reader is powered on, LED status indicator will turn green and blink for 1 time. Then it will turn red and blink for 3 times. At last the buzzer will send out a beep sound indicating the starting up process is completed. When using the card reader, it will send out different sounds prompt and the LED indicator to indicate different statuses. You can refer to tables below for detailed information. Table 1-4 Description of Prompt Sound Sound Prompt Description One beep Two rapid beeps Three slow beeps Rapidly continuous beeps Slowly continuous beeps Swiping card prompt For Card + Fingerprint authentication:
prompt for pressing the fingerprint after swiping the card. The operation of pressing keys or swiping card is valid. The operation of pressing keys or swiping card is invalid. Prompt for tamper-proof alarm. Prompt for buzzer alarm. The card reader is unencrypted. Table 1-5 Description of LED Indicator Description The card reader is power on. LED Indicator Status Green (blink for 1 time), and red (blink for 3 times) Green and blinking For Card + Fingerprint authentication:
9 Fingerprint Card Reader User Manual LED Indicator Status Description prompt for pressing the fingerprint after swiping the card. The operation fingerprint. The operation of swiping card is valid. Card reader is working normally. configuring the of The operation of swiping card is invalid. For RS-485 protocol: Registering failed or card reader is offline. Solid green for 2s Solid red Red and blink for 3 times Red and blinking 10 Fingerprint Card Reader User Manual Appendix: Tips for Scanning Fingerprint Recommended Finger Forefinger, middle finger or the third finger. Correct Scanning The figure displayed below is the correct way to scan your finger:
You should press your finger on the scanner horizontally. The center of your scanned finger should align with the scanner center. Incorrect Scanning The figures of scanning fingerprint displayed below are wrong:
Vertical Edge I Side Edge II Environment The scanner should avoid direct high light, high temperature, humid conditions and rain. When it is dry, the scanner may not recognize your fingerprint successfully. You can blow your finger and scan again. 11 Fingerprint Card Reader User Manual Others If your fingerprint is shallow, or it is hard to scan your fingerprint, we recommend you to use other authentication methods. If you have injuries on the scanned finger, the scanner may not recognize. You can change another finger and try again. 12 Fingerprint Card Reader User Manual UD22705N 13
1 | Label and Label Location | ID Label/Location Info | 2.19 MiB | April 28 2021 |
HIKVISION Fingerprint Card Reader Model: DS-K1201AMF UP: 12==130mA Max WAN UMMAUL YM MNT os:20zs i SN: C12345678 Made in China FCC ID:2ADTD-K1201AMF abel VOCat On
1 | Authorization Letter | Cover Letter(s) | 380.29 KiB | April 28 2021 |
Hangzhou Hikvision Digital Technology Co., Ltd. Date: 2020/5/20 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern:
I, the undersigned, hereby authorize UL-CCIC COMPANY LIMITED to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL-CCIC COMPANY LIMITED on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL-CCIC COMPANY LIMITED as our representative, we still recognize that we are responsible to:
a) b) c) d) e) f) comply with the relevant provisions of the certification program;
make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;
make claims regarding certification only in respect of the scope for which certification has been granted;
do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;
upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;
use certification only to indicate the products are certified as being in conformity with specified standards;
g)endeavor to ensure that no certificate or report nor any part thereof is used in amisleading manner;h)ensure that any reference to our product certification in communication mediasuch as documents, brochures or advertising, complies with the requirements ofthe Certification Division;i)keep a record of all complaints made known to us relating to the productscompliance with requirements of the relevant standard and to make these recordsavailable to the when requested;j)take appropriate action with respect to such complaints and any deficienciesfound in products or services that affect compliance with the requirements forcertification;k)document the actions taken.This authorization is valid until further written notice from the applicant. Sincerely Yours, Signed by: Company Name: Hangzhou Hikvision Digital Technology Co., Ltd. Contact Name: Xiuying Zhang Title of PersonCertification Engineer Address: No.555 Qianmo Road,Binjiang District Hangzhou 310052,China
1 | Confidentiality Letter | Cover Letter(s) | 145.46 KiB | April 28 2021 |
Hangzhou Hikvision Digital Technology Co., Ltd. Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID2ADTD-K1201AMF To Whom It May Concern:
Schematic Diagram Block Diagram Theory of Operation Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Company Name: Hangzhou Hikvision Digital Technology Co., Ltd. Contact Name: Xiuying Zhang Title of Person: Senior Certification engineer Address: No.555 Qianmo Road,Binjiang District Hangzhou 310052,China Date:2021/04/22
1 | Declaration Letter | Cover Letter(s) | 337.00 KiB | April 28 2021 |
Hangzhou Hikvision Digital Technology Co., Ltd. Address: No.555 Qianmo Road,Binjiang District Hangzhou 310052,China Confirmation Letter FCC ID: 2ADTD-K1201AMF We, Hangzhou Hikvision Digital Technology Co., Ltd. The product: Fingerprint Card Reader And model No.: DS-K1201AMFDS-K1201AMFUHKDS-
K1201AMFCKVDS-K1201AMFUVSDS-K1201AMFKVODS-
K1201AMFHUN DS-K1201AMFUHKDS-K1201AMFCKVDS-K1201AMFUVSDS-
K1201AMFKVODS-K1201AMFHUN have the same technical construction including circuit diagram, PCB Layout, components and component layout, all electrical construction and mechanical construction with DS-K1201AMF.The difference lies only the model name and selling area are different. Contact Name: Xiuying Zhang Title of Person: Senior Certification engineer
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2021-04-28 | 13.56 ~ 13.56 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2021-04-28
|
||||
1 | Applicant's complete, legal business name |
Hangzhou Hikvision Digital Technology Co., Ltd.
|
||||
1 | FCC Registration Number (FRN) |
0024149825
|
||||
1 | Physical Address |
No. 555 Qianmo Road, Binjiang District
|
||||
1 |
Hangzhou, N/A
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
L******@ul.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2ADTD
|
||||
1 | Equipment Product Code |
K1201AMF
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
X****** Z****
|
||||
1 | Telephone Number |
+86-5********
|
||||
1 | Fax Number |
+86-5********
|
||||
1 |
z******@hikvision.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Fingerprint Card Reader | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
UL-CCIC Company Limited
|
||||
1 | Name |
C**** Z******
|
||||
1 | Telephone Number |
+86 5********
|
||||
1 |
C******@ul.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 13.56000000 | 13.56000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC