FCC ID: 2ADTD-DS2DE3A MINI PTZ CAMERA

Network PTZ CameraQuick Start Guide Network PTZ Camera Quick Start Guide i Network PTZ CameraQuick Start Guide Quick Start Guide 2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. This Manual is the property of Hangzhou Hikvision Digital Technology Co., Ltd. or its affiliates (hereinafter referred to as Hikvision), and it cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision. Unless otherwise expressly stated herein, Hikvision does not make any warranties, guarantees or representations, express or implied, regarding to the Manual, any information contained herein. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (http://www.hikvision.com). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product. Trademarks Acknowledgement and other Hikvisions trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners. LEGAL DISCLAIMER i Network PTZ CameraQuick Start Guide TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL FAULTS AND ERRORS. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS;

HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD ii Network PTZ CameraQuick Start Guide PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. 05051920200602 iii Network PTZ CameraQuick Start Guide Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the Low Voltage Directive iv Network PTZ CameraQuick Start Guide 2015/35/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information, please see: www.recyclethis.info. 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information, please see: www.recyclethis.info. Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements. v Network PTZ CameraQuick Start Guide Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Warnings and Cautions Warnings: Serious injury or death may occur if any of the warnings are neglected. Cautions: Injury or equipment damage may occur if any of the cautions are neglected. Warnings Follow these safeguards to prevent serious injury or death. Cautions Follow these precautions to prevent potential injury or material damage. Warnings In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region. Refer to technical specifications for detailed information. Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with 24 VAC or 12 VDC according to the IEC60950-1 standard. Refer to technical specifications for detailed information. vi Network PTZ CameraQuick Start Guide Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire hazard. Make sure that the plug is firmly connected to the power socket. Make sure that the power has been disconnected before you wire, install or dismantle the PTZ camera. When the product is mounted on wall or ceiling, the device shall be firmly fixed. If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then contact the service center. If the product does not work properly, contact your dealer or the nearest service center. Never attempt to disassemble the camera yourself. (We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.) Cautions If the camera fails to synchronize local time with that of the network, you need to set up camera time manually. Visit the camera (via web browser or client software) and enter system settings interface for time settings. Make sure the power supply voltage is correct before using the camera. Do not drop the camera or subject it to physical shock, and do not expose it to high electromagnetism radiation. Avoid installation on vibrations surface or places subject to shock (ignorance can cause device damage). vii Network PTZ CameraQuick Start Guide Do not touch senor modules with fingers. If cleaning is necessary, use clean cloth with a bit of ethanol and wipe it gently. If the camera will not be used for an extended period, replace the lens cap to protect the sensor from dirt. Do not aim the camera at the sun or extra bright places. Blooming or smearing may occur otherwise (which is not a malfunction), and affect the endurance of sensor at the same time. The sensor may be burned out by a laser beam, so when any laser equipment is in using, make sure that the surface of sensor will not be exposed to the laser beam. Do not place the camera in extremely hot, cold, dusty or damp locations, and do not expose it to high electromagnetic radiation. To avoid heat accumulation, good ventilation is required for operating environment. Keep the camera away from liquid while in use. While in delivery, the camera shall be packed in its original packing, or packing of the same texture. This equipment is not suitable for use in locations where children are likely to be present. CAUTION: Risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. ATTENTION: IL Y A RISQUE D'EXPLOSION SI LA BATTERIE EST REMPLACE PAR UNE BATTERIE DE TYPE INCORRECT. METTRE AU REBUT LES BATTERIES USAGES CONFORMMENT AUX INSTRUCTIONS. viii Network PTZ CameraQuick Start Guide Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion. Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of flammable liquid or gas. Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas. Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or equivalent type only. Dispose of used batteries according to the instructions provided by the battery manufacturer. Lutilisation ou le remplacement inadquats de la pile peuvent entraner un risque dexplosion. Remplacez-la par le mme type ou lquivalent du mme type seulement. Jetez les piles usages conformment aux directives fournies par le fabricant de la pile. IC Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. ix Network PTZ CameraQuick Start Guide This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. ce matriel est conforme aux limites de dose d'exposition aux rayonnements, FCC / CNR-102 nonce dans un autre environnement.cette eqipment devrait tre install et exploit avec distance minimale de 20 entre le radiateur et votre corps. x Network PTZ CameraQuick Start Guide Table of Contents 1 Overview ......................................................................................... 1 1.1 Introduction ............................................................................. 1 1.2 Cable Descriptions .................................................................... 1 1.3 Alarm Output............................................................................ 2 2 Installation ...................................................................................... 4 2.1 Installing the Memory Card ...................................................... 4 2.1.1 DE1Axxx(I) Series PTZ Camera ........................................... 4 2.1.2 DE2Axxx(I) Series PTZ Camera ........................................... 8 2.1.3 DE2xxx(I) Series PTZ Camera ............................................. 8 2.1.4 DE3xxx Series PTZ Camera ................................................. 9 2.1.5 DY3xxx Series PTZ Bullet Camera ..................................... 10 2.1.6 DE4AxxxI Series PTZ Camera ............................................ 10 2.1.7 DE3Axxx(I) Series PTZ Camera ......................................... 12 2.2 Installing DE1Axxx(I) Series PTZ Camera ................................. 14 2.2.1 Ceiling Mounting ............................................................. 14 2.2.2 Wall Mounting ................................................................. 16 2.3 Installing DE2Axxx(I) Series PTZ Camera ................................. 19 2.4 Installing DE2xxx(I) Series PTZ Camera .................................... 19 2.4.1 Wall Mounting ................................................................. 19 2.4.2 Ceiling Mounting ............................................................. 24 2.4.3 Installing with Junction Box ............................................. 28 2.5 Installing DE3xxx Series PTZ Camera ....................................... 31 2.5.1 Ceiling Mounting ............................................................. 31 2.5.2 In-ceiling Mounting ......................................................... 34 2.6 Installing DY3xxx Series PTZ Bullet Camera ............................. 36 2.6.1 Dimensions of DY3xxx Series PTZ Bullet Camera.............. 36 2.6.2 Wall Mounting ................................................................. 38 xi Network PTZ CameraQuick Start Guide 2.6.3 Base Mounting ................................................................ 39 2.7 Installing DE4AxxxI Series PTZ Camera .................................... 40 2.7.1 Ceiling Mounting ............................................................. 41 2.7.2 In-ceiling Mounting ......................................................... 41 2.8 Installing DE3Axxx(I) Series PTZ Camera ................................. 44 2.8.1 Wall Mounting ................................................................. 44 2.9 Installation of Network Cable Water-proof Jacket ................... 48 2.10 Installation of Water-proof Tape ........................................... 49 2.11 Protective Measures for Outdoor Installation ....................... 53 3 Activate and Access Network Camera .......................................... 54 xii Network PTZ CameraQuick Start Guide The network PTZ camera has the following series:

1 Overview 1.1 Introduction DE1Axxx(I) Series PTZ Camera DE2Axxx(I) Series PTZ Camera DE2xxx(I) Series PTZ Camera DE3xxx Series PTZ Camera DY3xxx Series PTZ Bullet Camera DE4AxxxI Series PTZ Camera DE3Axxx(I) Series PTZ Camera Integrated with an optical zoom lens, this series of cameras feature in the PTZ limits, 3D positioning, Day/Night auto switch, 3D DNR, etc., and are widely applied in various kinds of environments. 1.2 Cable Descriptions The cable interfaces of network PTZ camera are shown in Figure 1-1. The cables are distinguished by different colors. Refer to the labels attached on the cables for identification. The cables vary depending on different camera models. Make sure the camera is power-off before you connect the Notes:

cables. 1 Network PTZ CameraQuick Start Guide Figure 1-1 Cables of PTZ Camera Power Cord: Supports 12 VDC power supply. Video Cable: Connect BNC Cable to test the video output. Alarm Cable: Connect terminal ALARM-IN with GND interface, and connect terminal ALARM-OUT with ALARM-COM interface. Audio Cable: Connect terminal AUDIO-IN with GND interface. Network Cable: Connect the network interface with network cable. 1.3 Alarm Output Alarm output is shown in Figure 1-2. 2 Power Cord DC12V IN Video Cable RS-485 Alarm Cable

... Audio Cable Network Cable Network PTZ CameraQuick Start Guide Figure 1-2 Alarm Output 3 Direct load Relay Output OUT (n) OUT (n)

DC Relay Output OUT (n) OUT (n) GND Output DC 30V 1A Power Supply JQC-3FG Relay

(10A 250VAC)

~220V AC FireWire Zero Line Network PTZ CameraQuick Start Guide 2 Installation Before you start:

Check the package contents and make sure that the device in the package is in good condition and all the assembly parts are included. Notes:

Do not drag the PTZ camera with its waterproof cables;

otherwise the waterproof performance is affected. Do not touch the bubble directly by hand. The image blurs otherwise. Do not power up the camera until the installation is finished. To ensure the safety of personnel and equipment, all the installation steps should be done with power supply off. 2.1 Installing the Memory Card You can install the memory card for local storage. 2.1.1 DE1Axxx(I) Series PTZ Camera Steps:

1. Open the cover with the straight screwdriver from a crack on the cover, as shown in Figure 2-1. 4 Network PTZ CameraQuick Start Guide Figure 2-1 Open the Cover 2. Unscrew the screws on the camera base with the cross screwdriver, and remove the bubble, as shown in Figure 2-2. Figure 2-2 Remove the Bubble 3. The position of memory card are various according to different camera model. Type I: open the memory card slot in the camera, and insert the memory card. 5 Crack Cover 2.0 Bubble Screw Network PTZ CameraQuick Start Guide Figure 2-3 Insert the Memory Card Type II: align the memory card with the memory card slot and insert it. Figure 2-4 Insert the Memory Card 4. Align the bubble with the camera base, and install the bubble back. Fix the bubble with four screws, as shown in Figure 2-5. 6 Reset Memory Card Slot Reset Memory Card Slot Network PTZ CameraQuick Start Guide Figure 2-5 Install the Bubble 5. Align the cover with the camera, and install the cover back, as shown in Figure 2-6. Figure 2-6 Install the Cover 7 Cover Network PTZ CameraQuick Start Guide 2.1.2 DE2Axxx(I) Series PTZ Camera Note:

The installation steps are similar to the installation steps of DE1Axxx(I) series camera. Refer to section 2.1.1 DE1Axxx(I) Series PTZ Camera. 2.1.3 DE2xxx(I) Series PTZ Camera Steps:

1. Open the memory card cover. Figure 2-7 DE2xxx Series PTZ Camera Figure 2-8 DE2xxxI Series (IR) PTZ Camera 8 Memory Card Cover Memory Card Cover Network PTZ CameraQuick Start Guide 2. Rotate the cover to a proper position, align the memory card with the memory card slot and insert it. Figure 2-9 Insert the Memory Card 3. Rotate the cover and push it back. 2.1.4 DE3xxx Series PTZ Camera Steps:

1. Loosen three screws on the bottom of camera to reveal the memory card slot, as shown in Figure 2-10. Figure 2-10 DE3xxx Series PTZ Camera 9 Reset Debug Memory Card Network PTZ CameraQuick Start Guide 2. Align the memory card with the memory card slot and insert it. 3. Fix the screws and assemble the PTZ camera. 2.1.5 DY3xxx Series PTZ Bullet Camera For DY3xxx series PTZ bullet camera, the memory card slot is in the camera module and if you need, the memory card can be installed before the camera leaves the factory. In order to prevent damage, we highly recommend that you do not disassemble the PTZ bullet camera by yourself. 2.1.6 DE4AxxxI Series PTZ Camera Steps:

1. Remove the four silicone plugs on the decorative rim as shown in Figure 2-11, and you can see four flange screws in the decorative rim. Figure 2-11 Remove the Silicone Plugs 2. Loosen four flange screws with a screwdriver. Remove the bubble and the decorative rim as shown in Figure 2-12. 10 Decorative Rim Silicone Plug Network PTZ CameraQuick Start Guide Figure 2-12 Remove the Bubble and the Decorative Rim 3. Open the memory card cover and insert the memory card into the card slot as shown in Figure 2-13 and Figure 2-14. Figure 2-13 For 20 Camera Module 11 Decorative Rim Bubble Flange Srews Memory Card Slot Memory Card Cover Network PTZ CameraQuick Start Guide Figure 2-14 For 4 Camera Module 4. Close the memory card cover. Fix the four flange screws and push four silicone plugs back to assemble the PTZ camera. 2.1.7 DE3Axxx(I) Series PTZ Camera

(Mode:DS-2DE3A400BW-DE/W) Steps:

1. Pull the decorative cover out and loosen 2 screws on memory card cover with screwdriver as shown in Figure 2-15. Figure 2-15 Open the memory card cover 12 Memory Card Slot Memory Card Cover Memory card cover Network PTZ CameraQuick Start Guide 2. Remove the memory card cover, including sealing ring, and insert the memory card as printed mark. Figure 2-16 Insert the memory card 3. Screw the memory cover back, making sure the sealing ring is flat, and then close the decorative cover. 13 Memory card Network PTZ CameraQuick Start Guide Figure 2-17 Complete the memory card installation 2.2 Installing DE1Axxx(I) Series PTZ Camera 2.2.1 Ceiling Mounting Notes:

The thickness of the ceiling shall range from 5 mm to 40 mm. Make sure the ceiling is strong enough to withstand more than four times the weight of the PTZ camera and its accessories. Steps:

1. Rotate the installation plate anticlockwise, and remove the installation plate, as shown in Figure 2-18. 14 DE3AxxxI DE3Axxx Network PTZ CameraQuick Start Guide Figure 2-18 Remove the Installation Plate 2. Drill four screw holes in the ceiling according to the installation plate. 3. Align the installation plate with the screw holes, and fix the installation plate on the ceiling. Figure 2-19 Fix the Installation Plate 15 OPEN Installation Plate Network PTZ CameraQuick Start Guide 4. Route the cables from the cable hole in the installation plate. Note:

Water-proof treatment is required for cable connectors. Refer to section 2.9 and 2.10 for details. 5. Align the camera with the installation plate, and rotate the camera clockwise to fix it, as shown in Figure 2-20. Figure 2-20 Fix the Camera 2.2.2 Wall Mounting Notes:

For cement wall, you need to use the expansion screw to fix the bracket. The mounting hole of the expansion pipe on the wall should align with the mounting hole on the bracket. For wooden wall, you can just use the self-tapping screw to fix the bracket. Make sure that the wall is strong enough to withstand more than eight times the weight of the PTZ camera and its accessories. 16 OPEN LOCK Network PTZ CameraQuick Start Guide Steps:

Note:

1. Remove the installation plate, and install it on the wall mounting bracket (not supplied) with two screws. Refer to step 1 in section 2.2.1 Ceiling Mounting to remove the installation plate. Figure 2-21 Install the Installation Plate 2. Loosen the fixing screw on the bracket and remove the bracket base. Figure 2-22 Remove the Bracket Base 3. Install the bracket base on the wall with four screws. 17 Fixing Screw Bracket Base Network PTZ CameraQuick Start Guide Figure 2-23 Install the Bracket Base 4. Route the cables. Align the camera with the installation plate on the wall mounting bracket, and rotate the camera clockwise to fix it on the bracket. Figure 2-24 Install the Camera 5. Connect the cables. Install the wall mounting bracket to the bracket base on the wall, and fix it with the supplied screw. Note:

Water-proof treatment is required for cable connectors. Refer to section 2.9 and 2.10 for details. 18 OPEN LOCK Network PTZ CameraQuick Start Guide Figure 2-25 Fix the Bracket 6. Remove the protective film after installation. 2.3 Installing DE2Axxx(I) Series PTZ Camera Note:

The installation steps are similar to the installation steps of DE1Axxx(I) series camera. Refer to section 2.2Installing DE1Axxx(I) Series PTZ Camera. 2.4 Installing DE2xxx(I) Series PTZ Camera DE2xxx series PTZ camera supports wall mounting, ceiling mounting, and installing with junction box. DE2xxxI Series (IR) PTZ camera supports wall mounting and ceiling mounting. 2.4.1 Wall Mounting Notes:

For cement wall, you need to use the expansion screw to fix the bracket. The mounting hole of the expansion pipe on the wall should align with the mounting hole on the bracket. 19 Network PTZ CameraQuick Start Guide For wooden wall, you can just use the self-tapping screw to fix the bracket. Make sure that the wall is strong enough to withstand more than eight times the weight of the PTZ camera and its accessories. Steps:

camera. 1. Rotate the base plate counterclockwise to separate it from the PTZ Figure 2-26 Base Plate for DE2xxx Series PTZ Camera Figure 2-27 Base Plate for DE2xxxI Series (IR) PTZ Camera 20 OPEN Base Plate on the Bottom of the Dome Front View of Base Plate OPEN Base Plate on the Bottom of the Dome Front View of Base Plate Network PTZ CameraQuick Start Guide 2. Align the cable hole on the base plate with the hole on the bracket for wiring. And install the base plate to the bracket by fixing three PM410 screws (supplied) to the holes marked with digit 2 on the bracket. Figure 2-28 For DE2xxx Series PTZ Camera Figure 2-29 For DE2xxxI Series (IR) PTZ Camera 3. Route the cables through the cable hole. 4. Align the PTZ camera with the base plate. Rotate the PTZ camera clockwise to the base plate, and the PTZ camera is secured with the base plate by three locks on the plate. 21 Network PTZ CameraQuick Start Guide Figure 2-30 Secure DE2xxx Series PTZ Camera Figure 2-31 Secure DE2xxxI Series (IR) PTZ Camera 5. Secure the mounting base to the wall with four PA425 screws

(supplied). 22 OPEN LOCK OPEN LOCK Network PTZ CameraQuick Start Guide Figure 2-32 Install the Mounting Base 6. Install the PTZ camera to the bracket. 1). Route the cables of the PTZ camera through the wall bracket. 2). Connect the corresponding cables. 3). Hang the bracket together with the PTZ camera on the mounting base. 4). Fix the mounting base with a PM410 screw. Figure 2-33 Secure the Mounting Base Note:

Water-proof treatment is required for cable connectors. Refer to section 2.9 and 2.10 for details. 23 Network PTZ CameraQuick Start Guide 2.4.2 Ceiling Mounting Purpose:

There are two ceiling mounting types provided for the camera, and we take the mounting without the junction box as the example. The ceiling mounting is applicable to the indoor/outdoor solid ceiling construction. The followings are the mandatory precondition for ceiling mounting:

The thickness of the ceiling shall range from 5 mm to 40 mm. Make sure the ceiling is strong enough to withstand more than four times the weight of the PTZ camera and its accessories. Notes:

Wiring The cables of PTZ camera can be routed either from the top or the side of the back box, as shown in Figure 2-34 and Figure 2-35. For the cables routed from the top of the back box, it is required to drill a cable hole in the ceiling. Figure 2-34 Cabling for DE2xxx Series PTZ Camera 24 Network PTZ CameraQuick Start Guide Figure 2-35 Cabling for DE2xxxI Series (IR) PTZ Camera Water-proof treatment is required for cable connectors. Refer to section 2.9 and 2.10 for details. Ceiling Mounting without Junction Box Note:

Steps:

1. Rotate the base plate counterclockwise to separate it from the PTZ camera, as shown in Figure 2-26 and Figure 2-27. 2. Attach the drill template (supplied) to the place where you want to fix the PTZ camera, and make sure the front arrow appoints to the monitoring area. Figure 2-36 Attach the Drill Template 25 Network PTZ CameraQuick Start Guide 3. Drill a cable hole in the ceiling according to the circle A on the template if you want to route the cables through the ceiling. Pull out the cable slot cover if you want to route the cables on the surface of the ceiling, as shown in Figure 2-37. Figure 2-37 For DE2xxx Series PTZ Camera Figure 2-38 For DE2xxxI Series (IR) PTZ Camera 4. Attach the base plate to the ceiling and secure it with the supplied three self-tapping screws by aligning with three screw holes in the ceiling, and the front arrows on the drill template and base plate should be aligned together as well, as shown in Figure 2-39 and Figure 2-40. 26 Cable Slot Cover Cable Slot Cover Network PTZ CameraQuick Start Guide Figure 2-39 For DE2xxx Series PTZ Camera Figure 2-40 For DE2xxxI Series (IR) PTZ Camera 5. Route the cables through the cable hole. 6. Align the PTZ camera with the base plate. Rotate the PTZ camera clockwise into the base plate, and the PTZ camera is secured with the base plate by three locks on the plate. 27 Network PTZ CameraQuick Start Guide Figure 2-41 Secure the PTZ Camera 2.4.3 Installing with Junction Box Notes:

The thickness of the ceiling shall range from 5 mm to 40 mm. Make sure the ceiling is strong enough to withstand more than four times the weight of the PTZ camera and its accessories. 1. Rotate the base plate counterclockwise to separate it from the PTZ Steps:

camera. Notes:

The base plate is not required when you install the PTZ camera with junction box. Keep it properly. The junction box is the optional accessory. Get it prepared before installation. 28 OPEN LOCK OPEN LOCK Network PTZ CameraQuick Start Guide Figure 2-42 For DE2xxx Series PTZ Camera Figure 2-43 For DE2xxxI Series (IR) PTZ Camera 2. Attach the drill template (supplied) to the place where you want to fix the PTZ camera, and make sure the front arrow appoints to the monitoring area. 3. Insert two PM410 screws into the ceiling, as shown in Figure 2-44. 29 OPEN Base Plate on the Bottom of the Dome Front View of Base Plate OPEN Base Plate on the Bottom of the Dome Front View of Base Plate Network PTZ CameraQuick Start Guide Figure 2-44 Attach the Drill Template 4. Attach the junction box to the ceiling and secure it by aligning the holes with two screws and rotating the junction box according to the direction as shown in Figure 2-45. Make sure the front arrows on the drill template and junction box should be aligned together as well. Figure 2-45 Fix the Junction Box 5. Connect the cables and route the cables clockwise through the hooks and fix the camera and the junction box with three hooks. Tighten it clockwise and loosen it anticlockwise. 30 Network PTZ CameraQuick Start Guide Figure 2-46 Fix the Camera 6. Secure the PTZ camera and remove the protective film. 2.5 Installing DE3xxx Series PTZ Camera DE3xxx series PTZ camera supports ceiling mounting and in-ceiling mounting. Note:

Wall mounting, installation with junction box, and installation with tripod are supported for DE3xxx series PTZ camera. The corresponding accessories shall be purchased separately. 2.5.1 Ceiling Mounting Notes:

The thickness of the ceiling shall range from 5 mm to 40 mm. Make sure the ceiling is strong enough to withstand more than four times the weight of the PTZ camera and its accessories. 31 Cable Outlet OPEN LOCK Network PTZ CameraQuick Start Guide Steps:

1. Attach the drill template (supplied) to the place where you want to fix the PTZ camera, and make sure the front arrow appoints to the monitoring area. 2. Drill a cable hole in the ceiling according to the circle A on the template if you want to route the cables through the ceiling, as shown in Figure 2-47. Figure 2-47 Attach the Drill Template 3. Insert the expansion screws into the ceiling. (Optional) 4. Insert four PM410 screws into the ceiling and fix the base plate, as shown in Figure 2-48. Make sure the FRONT arrow of the base plate is of the same direction as the arrow of the drill template. 32 Network PTZ CameraQuick Start Guide Figure 2-48 Fix the Base Plate 5. Connect the cables and route the cable through the cable outlet. Align the PTZ camera with the base plate. Rotate the PTZ camera clockwise into the base plate, and the PTZ camera is secured with the base plate by three locks on the plate. Note:

2-49. Water-proof treatment is required for cable connectors. Refer to section 2.9 and 2.10 for details. 6. Fix the screws on the side with a screwdriver, as shown in Figure 33 OPEN LOCK Network PTZ CameraQuick Start Guide Figure 2-49 Fix the Camera 7. Secure the PTZ camera and remove the protective film. 2.5.2 In-ceiling Mounting Notes:

Reserve at least 250 mm of height for in-ceiling mounting. The thickness of the ceiling shall range from 5 mm to 40 mm. Make sure the ceiling is strong enough to withstand more than four times the weight of the PTZ camera and its accessories. Steps:

1. Attach the drill template (supplied) to the place where you want to fix the PTZ camera, and drill a hole in the ceiling according to the template. Figure 2-50 Drill Template 2. Fix the base plate onto the in-ceiling bracket with the four screws in the package (supplied). Make sure that the cable holes of the base plate are aligned to the cable holes of the bracket, as shown in Figure 2-51. 34 Network PTZ CameraQuick Start Guide Figure 2-51 Fix the Base Plate to In-ceiling Bracket 3. Connect the cables and route the cable through the cable hole. Note:

2-52. Water-proof treatment is required for cable connectors. Refer to section 2.9 and 2.10 for details. 4. Align the PTZ camera with the base plate. Rotate the PTZ camera clockwise into the base plate, and the PTZ camera is secured with the base plate by three locks on the plate. 5. Fix the screws on the side with a screwdriver, as shown in Figure 35 OPEN LOCK Network PTZ CameraQuick Start Guide Figure 2-52 Fix the Camera 6. Fix the decorative rim with the bubble and the decorative rim will be attached to the in-ceiling bracket automatically, as shown in Figure 2-53. Figure 2-53 Assemble the Decorative Rim 7. Secure the camera and remove the protective film. 2.6 Installing DY3xxx Series PTZ Bullet Camera 2.6.1 Dimensions of DY3xxx Series PTZ Bullet Camera Two structures of DY3xxx Series PTZ bullet cameras are available:

wall-mounted PTZ bullet camera and base-mounted PTZ bullet camera. Select the proper PTZ bullet camera and the installation method according to its working environment. Dimensions of wall-mounted PTZ bullet camera is shown in Figure 2-54. 36 Network PTZ CameraQuick Start Guide Figure 2-54 Wall-mounted PTZ Bullet Camera Dimensions of base mounted PTZ bullet camera is shown in Figure 2-55. Figure 2-55 Base-mounted PTZ Bullet Camera 37 157 367 242 105 4-7

(74.2) 122

(74.2) Unit: mm 255 157 129 129 195 4-7 100 100 Unit: mm Network PTZ CameraQuick Start Guide 2.6.2 Wall Mounting Before you start:

The wall-mounted PTZ bullet camera can be installed on cement wall and pole mounting. The installing environment shall meet the following conditions:

For cement wall, you need to use the expansion screw to fix the bracket. The mounting hole of the expansion pipe on the wall should align with the mounting hole on the bracket. For wooden wall, you can just use the self-tapping screw to fix the bracket. Make sure that the wall is strong enough to withstand more than eight times the weight of the PTZ camera and its accessories. Steps:

1. Drill screw holes on the wall according to the dimensions of wall-mounted camera and insert four M6 expansion screws into the screw holes, as shown in Figure 2-56. Figure 2-56 Drill Screw Holes 2. Route the cables through the camera bracket and cover the four hex nuts with flat washers. 38 Network PTZ CameraQuick Start Guide 3. Fix the camera on the wall by knocking the expansion screws into the wall through the bracket, as shown in Figure 2-57. Figure 2-57 Install the Wall-mounted PTZ Bullet Camera To install the PTZ bullet camera with the pole, you can use hexagon socket screws instead of the expansion screws. Water-proof treatment is required for cable connectors. Refer to section 2.9 and 2.10 for details. 2.6.3 Base Mounting Before you start:

Base-mounted PTZ bullet camera can be installed on hard plane structures such as cement surface. Make sure that the plane structure is strong enough to withstand more than eight times the weight of the PTZ camera and its accessories. Notes:

Note:

Steps:

39 Network PTZ CameraQuick Start Guide 1. Drill screw holes on the plane surface according to the dimensions of base-mounted camera. 2. Insert four M6 hexagon socket screws (with length of 30 mm) through the camera bracket and the plane structure, and then lock the screw nuts to fix the camera, as shown in Figure 2-58. Figure 2-58 Install Base-mounted Camera Water-proof treatment is required for cable connectors. Refer to section 2.9 and 2.10 for details. 2.7 Installing DE4AxxxI Series PTZ Camera DE4AxxxI series (IR) PTZ camera supports ceiling mounting and in-ceiling mounting. Note:

Note:

Wall mounting, pendant mounting, and installation with junction box are supported for DE4AxxxI series (IR) PTZ camera. The corresponding accessories shall be purchased separately. 40 Network PTZ CameraQuick Start Guide 2.7.1 Ceiling Mounting Ceiling mounting for DE4AxxxI series (IR) PTZ camera is similar to ceiling mounting for DE2xxx series & DE2xxxI series (IR) PTZ camera. Refer to section 2.4.2 Ceiling Mounting for details. Note:

After DE4AxxxI series (IR) PTZ camera is installed, tighten the fixing screw with a screwdriver as shown in Figure 2-59. Figure 2-59 Tighten the Fixing Screw 2.7.2 In-ceiling Mounting Notes:

Reserve at least 250 mm of height for in-ceiling mounting. The thickness of the ceiling shall range from 5 mm to 40 mm. Make sure the ceiling is strong enough to withstand more than four times the weight of the PTZ camera and its accessories Steps:

1. Rotate the base plate counterclockwise to separate it from the PTZ camera, as shown in Figure 2-60. 41 Fixing Screw Network PTZ CameraQuick Start Guide Figure 2-60 Separate the Base Plate from the PTZ camera 2. Attach the drill template (supplied) to the place where you want to fix the PTZ camera, and drill a hole in the ceiling according to the template. Figure 2-61 Drill Template 3. Align the cable holes of the base plate to the cable holes of the in-ceiling bracket and then fix the base plate onto the bracket with the four screws in the package (supplied), as shown in Figure 2-62. 42 Rotate Counterclockwise Separate the Base Plate from the PTZ Camera 212 Network PTZ CameraQuick Start Guide Figure 2-62 Fix the Base Plate to In-ceiling Bracket 4. Connect the cables and route the cables through the cable hole. Note:

2-63. Water-proof treatment is required for cable connectors. Refer to section 2.9 and 2.10 for details. 5. Align the PTZ camera with the base plate. Rotate the PTZ camera clockwise into the base plate, and the PTZ camera is secured with the base plate by three locks on the plate. 6. Fix the screws on the side with a screwdriver, as shown in Figure Figure 2-63 Fix the Camera 43 Fix the Screw OPEN LOCK Network PTZ CameraQuick Start Guide 7. Place the camera and the bracket into the hole drilled in step 2, and rotate the screws clockwise to fix the camera. 8. Fix the decorative rim with the bubble and the decorative rim will be attached to the in-ceiling bracket automatically, as shown in Figure 2-64. Figure 2-64 Assemble the Decorative Rim 2.8 Installing DE3Axxx(I) Series PTZ Camera DE3Axxx(I) series PTZ camera only supports wall mounting. 2.8.1 Wall Mounting Notes:

The camera can be installed on cement wall and wooden wall. The installing environment shall meet the following conditions:

For cement wall, you need to use the expansion screw to fix the bracket. The mounting hole of the expansion pipe on the wall should align with the mounting hole on the bracket. 44 Fix the Screw Fix the Decorative Rim Network PTZ CameraQuick Start Guide For wooden wall, you can just use the self-tapping screw to fix the bracket. Make sure that the wall is strong enough to withstand more than eight times the weight of the PTZ camera and its cable Steps:

1. Pull the bracket out from the side of the camera, and unclench the decorative cover as shown in Figure 2-65. Figure 2-65 Open the Decorative cover and pull out bracket 2. The cables can be routed either through the wall or on the wall For the cables routed through the wall, it is required to drill a cable hole on the wall, aligning it with the hole on the bracket, surface. 45 Decorative cover Bracket Network PTZ CameraQuick Start Guide and connect cables through the wall and the cable hole on the bracket. For the cables routed on the wall surface, you need to route the cables through the middle slot on the bottom of the back box, as shown in Figure 2-66. Figure 2-66 Wiring on the wall 3. Fix the bracket to the target position with four screws (PA425) in the package (supplied), making sure the direction of the sign UP is upward as shown in Figure 2-67. Notes:

For cement wall, you need to use the expansion screw to fix the bracket. The mounting hole of the expansion pipe on the wall should align with the mounting hole on the bracket. For wooden wall, you can just use the self-tapping screw to fix the bracket. 46 Cable slot Network PTZ CameraQuick Start Guide Figure 2-67 Fix the bracket 4. Fix the camera to the mounting bracket. a. Route the cables. b. Align the camera to the wall mounting bracket, and push camera body until hear a click sound. c. Tighten the screws under the bracket. Figure 2-68 Fix the camera 5. Connect all the cables properly. Note:

47 Network PTZ CameraQuick Start Guide Water-proof treatment is required for cable connectors. Refer to section 2.9 and 2.10 for details. 6. Put cables in the back box, then close the decorative cover as shown in Figure 2-69. Figure 2-69 Connect the cables 2.9 Installation of Network Cable Water-proof Jacket Purpose:

If the camera is installed outdoor, you can assemble the water-proof accessory for the network cable to prevent the equipment from water. 48 Back box Network PTZ CameraQuick Start Guide Figure 2-70 Installation of waterproof jacket Steps:

1. Feed the network cable through and in order. 2. Fix on the network cable between and . 3. Place onto the end of , and plug the RJ45 male connector into RJ45 female connector. 4. Screw to clockwise 5. Push into . 6. Secure with the in clockwise direction. 2.10 Installation of Water-proof Tape If the camera is installed outdoor, you can use supplied water-proof tape to protect cable connectors and unused cables after the camera is secured on the installation surface. Purpose:

49 Align Network PTZ CameraQuick Start Guide Steps:

tape. 1. Tear off the yellow release paper on the back of the water-proof 2. Stretch the water-proof tape to reach twice the initial length. Figure 2-71 Stretch the Water-proof Tape 3. Wrap the water-proof tape around the cable connector tightly as the figure below. 50 Initial Length Stretch Stretch Waterproof Tape Length After Stretching Network PTZ CameraQuick Start Guide Figure 2-72 Wrap the Water-proof Tape Note:

Make sure that all naked wires are all firmly wrapped in the water-proof tape. 4. Press the tape on both ends of the connector to make sure no water can get in as the figure below. Figure 2-73 Press the Water-proof Tape 51 Cable Connector Press s s e r P P re ss Press Network PTZ CameraQuick Start Guide 5. Wrap the water-proof tape around the remaining unused cables tightly as the figure below. Figure 2-74 Wrap the Unused Cables Note:

below. Make sure that all naked wires are all firmly wrapped in the water-proof tape. 6. Press the tape to make sure no water can get in as the figure Figure 2-75 Press the Water-proof Tape 52 Press s s e r P P re ss Press Network PTZ CameraQuick Start Guide 2.11 Protective Measures for Outdoor Installation If the device is installed outdoors, necessary protective measures should be taken to ensure safety. Scan the following QR code to get protective measures for outdoor installation. 53 Network PTZ CameraQuick Start Guide 3 Activate and Access Network Camera Scan the QR code to get Activate and Visit Network Camera. Note that mobile data charges may apply if Wi-Fi is unavailable. 54 Network PTZ CameraQuick Start Guide 55 UD11955B-B

Model: DS-2DE3A400BW-DE/W F1S5 SN: _C12345678 10/2020 HIK VISIO: MINI PTZ CAMERA C WP: 12V=3.33A PoE(802.3at) 42.5-57V==0.6A Made in China 1C:20199-DS2DE3A CAN ICES-3 (A)INMB-3(A) FCC ID:2ADTD-DS2DE3A a Manufacturer: Hangzhou Hikvision Digital Technology Co.,Ltd. Address: No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China This device complies with Part 15 of the FCC Rules. DS-2DE3A400BW-DEW F1S5 Operation is subject to the following two conditions:

ances TTT

(2)this device must accept any interference received, including interference that may cause undesired operation. C12345678 21605528

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Hangzhou Hikvision Digital Technology Co., Ltd. No. 555 Qianmo Road, Binjiang District Hangzhou 310052, China Address Grantee Code FCC ID Contact Email Contact Phone Authorized Contact Name 2ADTD 2ADTD-DS2DE3A Xiuying Zhang zhangxiuying@hikvision.com

+86-571-88075998 a) b) c) d) e) I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

(1)

(2)

(3) labeling the equipment with the exact FCC ID as specified in this application, compliance statement labeling pursuant to the applicable rules, compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Date:2020/09/25 Applicant Signature:

Print Name:

Xiuying Zhang Title:

Senior Certification engineer

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Declaration Rev:0.0

Hangzhou Hikvision Digital Technology Co., Ltd. TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2ADTD-DS2DE3A To whom it may concern:

Date: 09/15/2020 We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Hangzhou Hikvision Digital Technology Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Xiuying Zhang Title: Senior Certification engineer Signature:

On behalf of Company: Hangzhou Hikvision Digital Technology Co., Ltd. Telephone: +86-0571-88075998-62460

Hangzhou Hikvision Digital Technology Co., Ltd. To:

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Hangzhou Hikvision Digital Technology Co., Ltd. No. 555 Qianmo Road, Binjiang District, Hangzhou 310052, China Confidentiality Request regarding application for FCC ID: 2ADTD-DS2DE3A Regarding:

LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Schematic(s) Block Diagrams Operational Descriptions Sincerely, Signature:

Printed Name (on file with the FCC associated with the Grantee Code): Xiuying Zhang Title: Senior Certification engineer Company Name: Hangzhou Hikvision Digital Technology Co., Ltd.

Hangzhou Hikvision Digital Technology Co., Ltd. Current Date : 2020-09-15 To:

Dear Sir/Madam, SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. No. 588 West Jindu Road, Songjiang District, Shanghai, China. 201612 Subject: Declaration Letter about Identity of Products

*WE (Hangzhou Hikvision Digital Technology Co., Ltd.) HEREBY DECLARED THAT Product Description MINI PTZ CAMERA Model No. DS-2DE3A400BW-DE/W-UHK;DS-2DE3A400BW-DE/W-CKV;DS-2DE3A400B W-DE/W-HUN;DS-2DE3A400BW-DE/W-KVO;DS-2DE3A400BW-DE/W-UVS;D S-2DE3ABCDEF-UVW/XYZ(each symbol of A,B,C,D,E,F,U,V,W,X,Y or Z maybe 0-9,A-Z or blank or "-"or "*" or "/"; "-" maybe "-" or blank; "/" maybe

"/" or blank) Manufacturers Name Hangzhou Hikvision Digital Technology Co., Ltd. Manufacturers Address No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China

*Except that the model number and appearance deviation, are identical with the original product as follows:

Note: The definition of identical should be electrically identical. A device will be considered to be electrically identical if no changes are made to the devices schematics, board layouts, component layouts, chip sets, resistors and all other electrical aspects of the device are identical. Model No. ():

DS-2DE3A400BW-DE/W Manufacturers Name ():

Hangzhou Hikvision Digital Technology Co., Ltd. Manufacturers Address):

No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Sincerely, Signature ():

Printed Name ():

Xiuying Zhang Position/Title ():

Senior Certification engineer Contact Number ():

+86-571-88075998