Wi-Fi Kit Quick Start Guide DS-2CV1021G0-IDW1 0 Wi-Fi KitQuick Start Guide Quick Start Guide COPYRIGHT 2018 Hangzhou Hikvision Digital Technology Co., Ltd. ALL RIGHTS RESERVED. Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be Hikvision). This user manual (hereinafter referred to be the Manual) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties, guarantees or representations, express or implied, regarding to the Manual. About this Manual The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the company website
(http://overseas.hikvision.com/en/). Please use this user manual under the guidance of professionals. Trademarks Acknowledgement and other Hikvisions trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners. 1 Wi-Fi KitQuick Start Guide Legal Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED AS IS, WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES. 2 Wi-Fi KitQuick Start Guide IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. 3 Wi-Fi KitQuick Start Guide FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU and the RE Directive 2014/53/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see:
www.recyclethis.info 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your 4 Wi-Fi KitQuick Start Guide supplier or to a designated collection point. For more information see: www.recyclethis.info Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut 5 Wi-Fi KitQuick Start Guide fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. Cet quipement doit tre install et utilis une distance minimale de 20 cm entre le radiateur et votre corps. Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Warnings and Cautions Warnings: Serious injury or death may occur if any of the warnings are neglected. Cautions: Injury or equipment damage may occur if any of the cautions are neglected. Warnings Follow these safeguards to prevent serious injury or death. Cautions Follow these precautions to prevent potential injury or material damage. 6 Wi-Fi KitQuick Start Guide Warnings For Network Camera:
Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region. Please refer to technical specifications for detailed information. Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with 12 VDC according to the IEC60950-1 standard. Please refer to technical specifications for detailed information. Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire hazard. Please make sure that the plug is firmly connected to the power socket. When the product is mounted on wall or ceiling, the device shall be firmly fixed. If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center. For NVR Device:
Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. 7 Wi-Fi KitQuick Start Guide In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region. Please refer to technical specifications for detailed information. Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with 100~240 VAC, 48 VDC or 12 VDC according to the IEC60950-1 standard. Please refer to technical specifications for detailed information. Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire hazard. Please make sure that the plug is firmly connected to the power socket. If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center. If the POE ports of device do not comply with Limited Power Source, the additional equipment connected to POE ports shall have fire enclosure. The USB interface of the /P devices can be connected with the mouse and U-flash disk storage device only. Cautions For Network Camera:
Make sure the power supply voltage is correct before using the camera. Do not drop the camera or subject it to physical shock. 8 Wi-Fi KitQuick Start Guide Do not touch sensor modules with fingers. If cleaning is necessary, use clean cloth with a bit of ethanol and wipe it gently. If the camera will not be used for an extended period, please replace the lens cap to protect the sensor from dirt. Do not aim the camera at the sun or extra bright places. Blooming or smearing may occur otherwise (which is not a malfunction), and affect the endurance of sensor at the same time. The sensor may be burned out by a laser beam, so when any laser equipment is in using, make sure that the surface of sensor will not be exposed to the laser beam. The operating temperature shall be -30C to +60C (-22 F to
+140 F). Do not place the camera in extremely hot, cold, dusty or damp locations, and do not expose it to high electromagnetic radiation. To avoid heat accumulation, good ventilation is required for operating environment. Keep the camera away from liquid while in use. While in delivery, the camera shall be packed in its original packing, or packing of the same texture. Regular part replacement: a few parts (e.g. electrolytic capacitor) of the equipment shall be replaced regularly according to their average enduring time. The average time varies because of differences between operating environment and using history, so regular checking is recommended for all the users. Please contact with your dealer for more details. 9 Wi-Fi KitQuick Start Guide Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or equivalent type only. Dispose of used batteries according to the instructions provided by the battery manufacturer. If the product does not work properly, please contact your dealer or the nearest service center. Never attempt to disassemble the camera yourself. (We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.) For NVR Device:
Before connecting and operating your device, please be advised of the following tips:
Ensure unit is installed in a well-ventilated, dust-free environment. Unit is designed for indoor use only. Keep all liquids away from the device. Ensure environmental conditions meet factory specifications. Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of dropping it may cause damage to the sensitive electronics within the unit. Use the device in conjunction with an UPS if possible. Power down the unit before connecting and disconnecting accessories and peripherals. A factory recommended HDD should be used for this device. Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or equivalent type 10 Wi-Fi KitQuick Start Guide only. Dispose of used batteries according to the instructions provided by the battery manufacturer. Power Supply Instructions for NVR Device:
Use only power supplies listed in the user instructions. Standard Power Supply Models Manufacturer European MSA-C2000IC 12.0-24P-DE MOSO POWER SUPPLY TECHNOLOGY CO.,LTD ADS-26FSG-1 2 12024EPG SHENZHEN HONOR ELECTRONIC CO.,LTD British MSA-C2000IC 12.0-24P-GB MOSO POWER SUPPLY TECHNOLOGY CO.,LTD ADS-26FSG-1 2 12024EPB SHENZHEN HONOR ELECTRONIC CO.,LTD 11 Wi-Fi KitQuick Start Guide Table of Contents 1 Introduction .................................................................................. 13 1.1 Application .................................................................... 13 1.2 NVR Appearance ........................................................... 14 1.2.1 Front Panel ......................................................... 14 1.2.2 Rear Panel .......................................................... 15 1.3 Camera Appearance ...................................................... 16 2 NVR Installation ............................................................................ 18 2.1 Precautions ................................................................... 18 2.2 Hard Disk Installation .................................................... 18 3 Camera Installation ....................................................................... 21 3.1 Wall/Ceiling Mounting .................................................. 21 3.2 (Optional) Installation of Network Cable Waterproof Jacket ....................................................................................... 24 4 Menu Operation ........................................................................... 27 4.1 Startup and Shutdown .................................................. 27 4.2 Activate Your NVR ......................................................... 27 4.3 Use the Setup Wizard .................................................... 28 4.4 Add IP Cameras ............................................................. 29 4.4.1 Wi-Fi Kit Cameras ............................................... 29 4.4.2 Other Camers ..................................................... 29 4.5 Hik-Connect Setup ........................................................ 29 12 Wi-Fi KitQuick Start Guide 1 Introduction 1.1 Application The Wi-Fi kit includes four network cameras and a NVR device. The NVR works as a wireless network router, and the camera connects to the NVR's Wi-Fi automatically after the camera is powered on. Note:
If you want to access the NVR via Internet, connect your NVR with the router. 13 VGA/HDMIWi-Fi CameraNVRMonitor Wi-Fi KitQuick Start Guide 1.2 NVR Appearance 1.2.1 Front Panel Front Panel Description No. Icon Description 1 2 3 Indicator turns red when NVR is powered up. Indicator lights in red when there is data transmission. Indicator blinks blue when network connection is functioning properly. 14 Wi-Fi KitQuick Start Guide 1.2.2 Rear Panel Rear Panel Description No. Icon Description 1 2 3 4 5 6 Wi-Fi Antenna Wi-Fi antenna interface. Power supply 12 VDC power supply. Audio out One audio output. VGA HDMI LAN VGA interface HDMI video output connector. One RJ-45 10M/100M self-adaptive Ethernet interface 7 Wi-Fi Antenna Wi-Fi antenna interface. 15 Wi-Fi KitQuick Start Guide No. Icon Description 8 9 USB Ground Two USB 2.0 interface. Ground (needs to be connected when device starts up). 1.3 Camera Appearance Overview Description Description No. 1 2 3 Lens IR LED Cover Mic 16 12345678 Wi-Fi KitQuick Start Guide No. Description Status Indicator Flashing Blue: Normal Wi-Fi connection. Solid Red: The camera is during startup. Flashing red and blue: The camera has started and starts Wi-Fi configuration. Flashing Red:
Fast Flashing: The network connection failed. Slow Flashing: Memory card error or other problems. Camera Body Bracket Power Interface Network Interface 4 5 6 7 8 17 Wi-Fi KitQuick Start Guide 2 NVR Installation 2.1 Precautions During installation of the NVR:
Use brackets for rack mounting. Ensure ample room for audio and video cables. When routing cables, ensure that the bend radius of the cables is no less than five times than its diameter. Connect the alarm cable. Allow at least 2cm (0.75-inch) of space between racks mounted devices. Ensure the NVR is grounded. Environmental temperature should be within the range of -10 to +55 C, +14 to +131 F. Environmental humidity should be within the range of 10% to 90%. 2.2 Hard Disk Installation Before you start:
If the NVR has been installed with hard disks, skip this section. Disconnect the power from the NVR before installing a hard disk drive (HDD). A factory recommended HDD should be used for this installation. Tools Required: Screwdriver. 18 Wi-Fi KitQuick Start Guide Steps:
1. Remove the cover from device by unfastening the screws on panels. Remove Cover 2. Connect the data cable and power cable. a) Connect one end of data cable to the device motherboard. b) Connect the other end of data cable to HDD. c) Connect one end of power cable to HDD. d) Connect the other end of power cable to the device motherboard. 19 Wi-Fi KitQuick Start Guide Connect Cables 3. Set the device up, match HDD screw threads with the reserved holes on the device bottom, and fix HDD with screws. Fix HDD to Device Bottom 4. (Optional) Repeat the steps above to install other HDDs. 5. Reinstall the device cover and fasten screws. 20 Wi-Fi KitQuick Start Guide 3 Camera Installation Before you start:
Make sure the device in the package is in good condition and all the assembly parts are included. The standard power supply is 12 VDC. Make sure your power supply matches with your camera. Make sure all the related equipment is power-off during the installation. Check the specification of the products for the installation environment. Make sure that the wall is strong enough to withstand four times the weight of the camera and the bracket. For the camera that supports IR, you are required to pay attention to the following precaution to prevent IR reflection:
Make sure that there is no reflective surface too close to the camera lens. The IR light from the camera may reflect back into the lens causing reflection. 3.1 Wall/Ceiling Mounting Steps:
1. Paste the drill template on the wall or ceiling and drill holes according to the marked holes on the drill template. 21 Wi-Fi KitQuick Start Guide Drill the Holes 2. If you need to route cables through the wall or ceiling, cut a cable hole according to the drill template. Skip this step if you want to route the cables on the surface of the wall or ceiling. 3. Route the cables of the camera. 4. Install the camera to the wall or ceiling with screws. 22 3-4186855Screw HoleScrew HoleScrew HoletemplateSide Outlet Wi-Fi KitQuick Start Guide Install the Camera 5. Adjust the view angle of the camera. 1). Loosen the fixing ring to adjust the pan angle. 2). Loosen the adjusting screw 1 ring to adjust the tilt angle. 3). Loosen the adjusting screw 2 to adjust the rotation angle. 4). Tighten the fixing ring and the adjusting screws. View Angle Adjustment 23 Adjusting Screw 2Adjusting Screw 1Fixing RingRotation: 0 to 360Tilt: 0 to 180Pan: 0 to 360 Wi-Fi KitQuick Start Guide 3.2 (Optional) Installation of Network Cable Waterproof Jacket Purpose:
If the camera is installed outdoor, you can use the waterproof accessory for the network cable after the camera is secured on the installation surface. Figure 3-4 Waterproof Accessory Components Components No. Components 1 2 3 4 5 6 7 Cameras Network Interface Socket O-Type Gasket Network Plug Waterproof Endcap Waterproof Rubber Gasket Lock Nut Network Cable from Router/Switch 24 Wi-Fi KitQuick Start Guide Steps:
Feed the plugless network cable through the lock nut , waterproof rubber gasket (the rubber gasket inset ridge must face the waterproof endcap), and the waterproof endcap in order. Crimp an RJ-45 network plug onto the end of the cable, taking care to insert the twisted pairs of wires in correct order. Place the O-type gasket onto the end of the cameras network interface socket . Insert the network plug into the cameras network interface socket . Insert the waterproof rubber gasket into the waterproof endcap , and secure lock nut with the waterproof endcap . Align the snap on the waterproof endcap with the notch on the cameras network interface socket , and then secure the waterproof endcap to the cameras network interface socket to finish installation. 25 Wi-Fi KitQuick Start Guide Figure 3-5 Waterproof Accessory Installation 26 CameraSwitch/RouterAlign the snap and notch.i. Insert into .ii. Secure with . Wi-Fi KitQuick Start Guide 4 Menu Operation 4.1 Startup and Shutdown To start your NVR:
Steps:
1. Check the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an Uninterruptible Power Supply (UPS) be used in conjunction with the device. The Power button on the front panel should be red, indicating the device is receiving the power. 2. Press the power switch on the panel. The Power LED should turn blue. The unit will begin to start. After the device starts up, the wizard will guide you through the initial settings, including modifying password, date and time settings, network settings, HDD initializing, and recording. To shut down the NVR:
Steps:
1. Enter the Shutdown menu. Go to Menu > Shutdown. 2. Select Shutdown. 3. Click Yes. 4.2 Activate Your NVR Purpose:
27 Wi-Fi KitQuick Start Guide For the first-time access, you need to activate the NVR by setting an admin password. No operation is allowed before activation. You can also activate the NVR via Web Browser, SADP or client software. 1. Input the same password in the text field of Create New Password and Confirm New Password. STRONG PASSWORD RECOMMENDED We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product. 2. Enter IP Camera Activation Password to set the IP camera activation password. 3. Select Area/Country. 4. Click OK. 4.3 Use the Setup Wizard The Setup Wizard can guide you to configure the system resolution, system date/time, HDD initialization, IP camera management, etc. 28 Wi-Fi KitQuick Start Guide 4.4 Add IP Cameras 4.4.1 Wi-Fi Kit Cameras The supplied Wi-Fi kit cameras can connect to the NVR automatically after it is powered on. 4.4.2 Other Camers For the other cameras, follow the steps below to configure the Wi-Fi parameters and add the cameras. 1. Go to Menu > Configuration > WiFi. 2. Configure wireless network parameters, including Network Bridging, SSID, Security Mode, and Key. 3. Access the Web of the camera. 4. Go to Configuration > Network > Advanced Settings > Wi-Fi to set the Wi-Fi parameters. Note:
For the detailed information, see the User Manual of the Network Camera. 5. Click to select an idle window in the live view mode of the NVR. 6. Click in the center of the window. 7. Select the detected IP camera and click Add to add it directly. 4.5 Hik-Connect Setup The Hik-Connect mobile client can generally manage various kinds of devices. With the client, you can remotely control NVRs, DVRs, and network cameras, etc. 29 Wi-Fi KitQuick Start Guide Steps:
1. Download and install the Hik-Connect app by searching Hik-Connect in App Store or Google PlayTM. 2. Launch the app and register for a Hik-Connect user account. 3. Log in Hik-Connect app after registration. 4. Use a network cable to connect the NVR with a router. 5. In the Hik-Connect app, tap + on the upper-right corner and then scan the QR code of the NVR to add the NVR. 6. After the adding, you can get the live view, play back the videos in the app. Note:
For detailed information, refer to the user manual of the Hik-Connect app. 30 UD11327B 0