FCC ID: 2ADTD-D0312021 Wireless PIR-Glass Break Detector

DS-PDPG12P-EG2-WB Wireless PIR-Glass Break Detector Quick Start Guide 3. Battery 2. Indicator 5. Tamper Switch 3. Bracket Tamper Port 6. Power Switch APPEARANCE E N G L I S H 1 1. Microphone 4. Joystick 2 ENROLLMENT 3 INSTALLATION I. Check signal strength. II. Install the device. a. Mount the detector with screw. b. Mount the detector with sponge tape. III. (Optional)Knock out the hole,and adjust pick-up direction. IV. (Optional)Install the device with bracket. TEST 4 User Manual Scan the QR code for more information and operation help. Specification Detection range Auto sensitivity Pet immunity PIR Specication 12m85.9 Yes Up to 30Kg (Height40cm) Glass Break Specication Detection range 8m radius Tamper protection LED indicator Operating temperature Storage temperature 3 Operating humidity Installation height Dimension (W H D) Weight Transmission frequency RF range Battery Standard battery life Front & Back Green(PIR), Red(BG), Blue(alarm)

-10 C to 55 C (14 F to 131 F)

-10 C to 40 C (14 F to 104 F) EN Certied

-20 C to 60 C (-4 F to 140 F) 10% to 90%

1.8 to 2.4m 65.5mm 103mm 48.5mm 134 g 433.1MHz and 433.7MHz 0.8Km (open area) CR123A x 2 (included) 5 years 2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to rmware updates or other reasons. Please nd the latest version of this Manual at the Hikvision website (https://www.hikvision.com/). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product. and other Hikvision's trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners. Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL FAULTS AND ERRORS. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. This product and - if applicable - the supplied accessories too are marked with "CE"

and comply therefore with the applicable harmonized European standards listed under the RE Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see:

www.recyclethis.info 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specic battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see:www.recyclethis.info BATTERY WARNING BATTERY CAUTION 1. Do not ingest battery, Chemical Burn Hazard 2. Keep new and used batteries away from the children. 3. If the battery compartment does not close securetyly, stop using the product and keep it away from children. 4. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. 1. Risk of re or explosion if the battery is replaced by an incorrect type. 2. Improper replacement of the battery with an incorrect type may defeat a safeguard

(for example, in the case of some lithium battery types). 3. Do not dispose of the battery into re or a hot oven, or mechanically crush or cut the battery, which may result in an explosion. 4. Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of ammable liquid or gas. 5. Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of ammable liquid or gas. 6. Dispose of used batteries according to the instructions INSTALLATION CAUTION The additional force shall be equal to three times the weight of the equipment but not less than 50N. The equipment and its associated mounting means shall remain secure during the installation. After the installation, the equipment, including any associated mounting plate, shall not be damaged. 1 2 3 4 12m 10m 8m 6m 4m 2m 1m 2.4m User Manual 1 2 3 4 5 6 xxxx Device 1 I Signal Strength Test 2 3 4 II

<30 Kg 2. Piloto ASPECTO E S P A O L 1 1. Micrfono 4. Palanca de mando 2 REGISTRO 3 I. Comprobar la intensidad de la seal. II. INSTALACIN 5. Interruptor antimanipulacin 3. Puerto de manipulacin del soporte 6. Interruptor de alimentacin Instalar el dispositivo. a. Montaje del sensor con tornillos. b. Montaje del sensor con burlete adhesivo de espuma. III. Use los agujeros para retirar la tapa y ajuste la direccin de captacin

(opcional). PRUEBA IV. Instalacin del dispositivo con soporte (opcional). 4 Manual de usuario Escanee el cdigo QR para obtener ms informacin y ayuda sobre el funcionamiento. Especificacin Especicacin de infrarrojo pasivo (PIR) Alcance de deteccin Sensibilidad automtica Inmunidad a las mascotas 12 m, 85,9 S Hasta 30 kg (altura < 40 cm) Especicacin de rotura de vidrio Alcance de deteccin Radio de 8 m Proteccin antimanipulacin Piloto led Temperatura de funcionamiento Temperatura de almacenamiento Humedad de funcionamiento Altura de instalacin Dimensiones (An. Al. Pr.) Peso Frecuencia de transmisin Alcance de radiofrecuencia Batera Vida til de la batera convencional 5 aos Anterior y posterior Verde (PIR), rojo (rotura de vidrio), azul (alarma)

-10 C a 55 C (14 F a 131 F)

-10 C a 40 C (14 F a 104 F), con certicacin EN

-20 C a 60 C (-4 F a 140 F) 10 % a 90 %

1,8 a 2,4 m 65,5 mm x 103 mm x 48,5 mm 134 g 433.1MHz and 433.7MHz 0,8 km (rea abierta) 2 bateras CR123A (incluidas) 2. Indicador APRESENTAO P O R T U G U S 1 1. Microfone 4. Controle 2 REGISTRO 3 I. Verique a intensidade do sinal. II. Instale o dispositivo. INSTALAO 3. Porta antiviolao do suporte 5. Chave de violao 6. Interruptor a. Monte o detector com parafusos. b. Monte o detector com ta esponjosa. III. (Opcional) Retire a tampa dos furos e ajuste a direo de captura. IV. (Opcional) Instale o dispositivo com suporte. 4 Manual do usurio TESTE Leia o cdigo QR para mais informaes e ajuda na operao. Especificaes Alcance de deteco Sensibilidade automtica Imunidade a pet Especicao PIR 12 m, 85,9 Sim At 30 kg (altura < 40 cm) Especicao de quebra de vidro Alcance de deteco Raio de 8 m Proteo antiviolao Indicador LED Temperatura de operao Frontal e traseira Verde (PIR), vermelho (BG), azul (alarme)

-10 C a 55 C (14 F a 131 F)

-10 C a 40 C (14 F a 104 F) certicado EN Temperatura de armazenamento -20 C a 60 C (-4 F a 140 F) Umidade de operao Altura de instalao Dimenses (L A P) Peso Frequncia de transmisso Faixa de RF Bateria Durao padro da bateria 10% a 90%

1,8 m a 2,4 m 65,5 mm 103 mm 48,5 mm 134 g 433.1MHz and 433.7MHz 0,8 km (espao aberto) 2 x CR123A (includas) 5 anos Warning This is a class B product. In a domestic environment this product may cause radio inter-ference in which case the user may be required to take adequate measures. FCC Information Please take attention that changes or modication not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation 2020 Hangzhou Hikvision Digital Technology Co., Ltd. Todos los derechos reservados. Sobre este manual Este manual incluye las instrucciones de utilizacin y gestin del producto. Las guras, grcos, imgenes y cualquier otra informacin que encontrar en lo sucesivo tienen nicamente nes descriptivos y aclaratorios. La informacin incluida en el manual est sujeta a cambios, sin aviso previo, debido a las actualizaciones de software u otros motivos. Visite el sitio web de Hikvision https://www.hikvision.com/ para acceder a la ltima versin de este manual. Utilice este manual con la gua y asistencia de profesionales capacitados en el soporte del producto. y otras marcas comerciales y logotipos de Hikvision son propiedad de Hikvision en diferentes jurisdicciones. Las dems marcas comerciales y logotipos mencionados son propiedad de sus respectivos dueos. Descargo de responsabilidad EN LA MEDIDA MXIMA PERMITIDA POR LAS LEYES APLICABLES, ESTE MANUAL Y EL PRODUCTO DESCRITO INCLUIDOS SU HARDWARE, SOFTWARE Y FIRMWARE SE SUMINISTRAN TAL CUAL Y CON TODOS SU FALLOS Y ERRORES. HIKVISION NO OFRECE GARANTAS, EXPLCITAS O IMPLCITAS, INCLUIDAS, A MODO ENUNCIATIVO, COMERCIABILIDAD, CALIDAD SATISFACTORIA O IDONEIDAD PARA UN PROPSITO EN PARTICULAR. EL USO QUE HAGA DEL PRODUCTO CORRE BAJO SU NICO RIESGO. EN NINGN CASO, HIKVISION PODR CONSIDERARSE RESPONSABLE ANTE USTED DE NINGN DAO ESPECIAL, CONSECUENTE, INCIDENTAL O INDIRECTO, INCLUYENDO, ENTRE OTROS, DAOS POR PRDIDAS DE BENEFICIOS COMERCIALES, INTERRUPCIN DE LA ACTIVIDAD COMERCIAL, PRDIDA DE DATOS, CORRUPCIN DE LOS SISTEMAS O PRDIDA DE DOCUMENTACIN, YA SEA POR INCUMPLIMIENTO DEL CONTRATO, AGRAVIO (INCLUYENDO NEGLIGENCIA), RESPONSABILIDAD DEL PRODUCTO O EN RELACIN CON EL USO DEL PRODUCTO, INCLUSO CUANDO HIKVISION HAYA RECIBIDO UNA NOTIFICACIN DE LA POSIBILIDAD DE DICHOS DAOS O PRDIDAS. USTED RECONOCE QUE LA NATURALEZA DE INTERNET IMPLICA RIESGOS DE SEGURIDAD INHERENTES Y HIKVISION NO TENDR NINGUNA RESPONSABILIDAD POR EL FUNCIONAMIENTO ANORMAL, FILTRACIONES DE PRIVACIDAD U OTROS DAOS RESULTANTES DE ATAQUES CIBERNTICOS, ATAQUES DE HACKERS, INFECCIONES DE VIRUS U OTROS RIESGOS DE SEGURIDAD DE INTERNET; SIN EMBARGO, HIKVISION PROPORCIONAR APOYO TCNICO OPORTUNO DE SER NECESARIO. USTED ACEPTA USAR ESTE PRODUCTO DE CONFORMIDAD CON TODAS LAS LEYES APLICABLES Y SOLO USTED ES EL NICO RESPONSABLE DE ASEGURAR QUE EL USO CUMPLA CON DICHAS LEYES. EN ESPECIAL, USTED ES RESPONSABLE DE USAR ESTE PRODUCTO DE FORMA QUE NO INFRINJA LOS DERECHOS DE TERCEROS, INCLUYENDO, DE MANERA ENUNCIATIVA MAS NO LIMITATIVA, DERECHOS DE PUBLICIDAD, DERECHOS DE PROPIEDAD INTELECTUAL, DERECHOS RELATIVOS A LA PROTECCIN DE DATOS Y OTROS DERECHOS RELATIVOS A LA PRIVACIDAD. NO UTILIZAR ESTE PRODUCTO PARA NINGN USO FINAL PROHIBIDO, INCLUYENDO EL DESARROLLO O LA PRODUCCIN DE ARMAS DE DESTRUCCIN MASIVA, EL DESARROLLO O PRODUCCIN DE ARMAS QUMICAS O BIOLGICAS, NINGUNA ACTIVIDAD EN EL CONTEXTO RELACIONADO CON ALGN EXPLOSIVO NUCLEAR O EL CICLO DE COMBUSTIBLE NUCLEAR INSEGURO O EN APOYO DE ABUSOS DE LOS DERECHOS HUMANOS. EN CASO DE HABER CONFLICTO ENTRE ESTE MANUAL Y LA LEGISLACIN VIGENTE, ESTA LTIMA PREVALECER. Este producto, y en su caso tambin los accesorios suministrados, tienen la marca "CE" y por tanto cumplen con las normas europeas armonizadas aplicables enumeradas en la Directiva de equipos de radio 2014/53/UE, la Directiva de compatibilidad electromagntica 2014/30/UE y la Directiva de restriccin del uso de sustancias peligrosas 2011/65/UE. 2012/19/UE (directiva RAEE, residuos de aparatos elctricos y electromagnticos): En la Unin Europea, los productos marcados con este smbolo no pueden ser desechados en el sistema de basura municipal sin recogida selectiva. Para un reciclaje adecuado, entregue este producto en el lugar de compra del equipo nuevo equivalente o deshgase de l en el punto de recogida designado a tal efecto. Para ver ms informacin, visite: www.recyclethis.info 2006/66/CE (directiva sobre bateras): Este producto lleva una batera que no puede ser desechada en el sistema municipal de basuras sin recogida selectiva dentro de la Unin Europea. Consulte la documentacin del producto para ver la informacin especca de la batera. La batera lleva marcado este smbolo, que incluye unas letras indicando si contiene cadmio (Cd), plomo (Pb), o mercurio (Hg). Para un reciclaje adecuado, entregue la batera a su vendedor o llvela al punto de recogida de basuras designado a tal efecto. Para ms informacin visite: www.recyclethis.info. ADVERTENCIA DE BATERA 1. No ingiera la batera, peligro de quemadura qumica 2. Mantenga las bateras nuevas y usadas fuera del alcance de los nios. 3. Si el compartimento de la batera no cierra debidamente, deje de usar el producto y mantngalo fuera del alcance de los nios. 4. Si sospecha que una batera ha sido tragada o introducida en alguna parte del cuerpo, busque atencin mdica de inmediato. PRECAUCIONES RELATIVAS A LA BATERA 1. Peligro de fuego o explosin si se reemplaza la batera por un tipo incorrecto. 2. Una sustitucin inadecuada de la batera por otra de tipo incorrecto podra inhabilitar alguna medida de proteccin (por ejemplo, en el caso de algunas bateras de litio). 3. No arroje la batera al fuego ni la meta en un horno caliente, ni intente aplastar o cortar mecnicamente la batera, ya que podra explotar. 4. No deje la batera en lugares con temperaturas extremadamente altas, ya que podra explotar o tener fugas de lquido electroltico o gas inamable. 5. No permita que la batera quede expuesta a una presin de aire extremadamente baja, ya que podra explotar o tener fugas de lquido electroltico o gas inamable. 6. Deshgase de las pilas usadas conforme a las instrucciones. PRECAUCIONES DE INSTALACIN La fuerza adicional debe ser equivalente a tres veces el peso del equipo, pero no inferior a 50 N. El equipo y el soporte asociado deben permanecer seguros durante la instalacin. Tras la instalacin, no se debe daar el equipo ni tampoco las placas de montaje asociadas. 2020 Hangzhou Hikvision Digital Technology Co., Ltd. Todos os direitos reservados. Acerca deste Manual O Manual inclui instrues para utilizar e gerir o produto. As fotograas, os grcos, as imagens e todas as outras informaes doravante apresentadas destinam-se apenas a ns de descritivos e informativos. As informaes que constam do Manual esto sujeitas a alterao, sem aviso prvio, devido a atualizaes de rmware ou a outros motivos. Encontre a verso mais recente deste Manual no site da Hikvision (https://www.hikvision.com/). Utilize este Manual sob orientao e com a assistncia de prossionais formados neste Produto. e outras marcas registradas e logotipos da Hikvision so propriedade da Hikvision em diversas jurisdies. Outras marcas comerciais e logtipos mencionados so propriedade dos respetivos proprietrios. Aviso legal NA MEDIDA MXIMA PERMITIDA PELA LEI APLICVEL, ESTE MANUAL E O PRODUTO DESCRITO, COM O SEU HARDWARE, SOFTWARE E FIRMWARE, SO FORNECIDOS TAL COMO ESTO E COM TODAS AS SUAS FALHAS E ERROS. A HIKVISION EXCLUI, DE FORMA EXPLCITA OU IMPLCITA, GARANTIAS DE, INCLUINDO E SEM LIMITAO, COMERCIABILIDADE, QUALIDADE DO SERVIO OU ADEQUAO A UMA FINALIDADE ESPECFICA. A SUA UTILIZAO DESTE PRODUTO FEITA POR SUA CONTA E RISCO. EM NENHUMA CIRCUNSTNCIA, A HIKVISION SER RESPONSVEL POR SI EM RELAO A QUAISQUER DANOS ESPECIAIS, CONSEQUENCIAIS, INCIDENTAIS OU INDIRETOS, INCLUINDO, ENTRE OUTROS, DANOS PELA PERDA DE LUCROS COMERCIAIS, INTERRUPO DA ATIVIDADE, PERDA DE DADOS, CORRUPO DE SISTEMAS OU PERDA DE DOCUMENTAO SEJA COM BASE NUMA VIOLAO DO CONTRATO, ATOS ILCITOS (INCLUNDO NEGLIGNCIA), RESPONSABILIDADE PELO PRODUTO OU, DE OUTRO MODO, RELACIONADA COM A UTILIZAO DO PRODUTO, AINDA QUE A HIKVISION TENHA SIDO AVISADA SOBRE A POSSIBILIDADE DE TAIS DANOS OU PERDAS. O UTILIZADOR RECONHECE QUE A NATUREZA DA INTERNET OFERECE RISCOS DE SEGURANA INERENTES E QUE A HIKVISION NO SER RESPONSABILIZADA POR UM FUNCIONAMENTO ANORMAL, PERDA DE PRIVACIDADE OU OUTROS DANOS RESULTANTES DE ATAQUES INFORMTICOS, ATAQUES DE PIRATARIA, INFEO POR VRUS OU OUTROS RISCOS ASSOCIADOS SEGURANA DA INTERNET. NO ENTANTO, A HIKVISION PRESTAR APOIO TCNICO ATEMPADO, SE SOLICITADO. O UTILIZADOR ACEITA UTILIZAR ESTE PRODUTO EM CONFORMIDADE COM TODAS AS LEIS APLICVEIS E SER O NICO RESPONSVEL POR GARANTIR QUE A SUA UTILIZAO CONFORME LEI APLICVEL. PARTICULARMENTE, O UTILIZADOR O RESPONSVEL PELA UTILIZAO DESTE PRODUTO DE MODO QUE NO INFRINJA OS DIREITOS DE TERCEIROS, INCLUINDO, ENTRE OUTROS, OS DIREITOS DE PUBLICIDADE, DIREITOS DE PROPRIEDADE INTELECTUAL OU DE PROTEO DE DADOS, OU QUAISQUER OUTROS DIREITOS DE PRIVACIDADE. O UTILIZADOR NO PODER UTILIZAR ESTE PRODUTO PARA QUAISQUER UTILIZAES FINAIS PROIBIDAS, INCLUINDO O DESENVOLVIMENTO OU PRODUO DE ARMAS DE DESTRUIO MACIA, DESENVOLVIMENTO OU PRODUO DE QUMICOS OU ARMAS BIOLGICAS, QUAISQUER ATIVIDADES DESENVOLVIDAS NO MBITO DE EXPLOSIVOS NUCLEARES OU CICLOS DE COMBUSTVEL NUCLEAR INSEGURO OU PARA APOIAR ABUSOS AOS DIREITOS HUMANOS. NA EVENTUALIDADE DA OCORRNCIA DE ALGUM CONFLITO ENTRE ESTE MANUAL E A LEGISLAO APLICVEL, ESTA LTIMA PREVALECE. Este produto e os acessrios fornecidos (se aplicvel) esto marcados com CE e esto em conformidade com os padres europeus compatveis e aplicveis listados nas Diretivas RE 2014/53/UE, EMC 2014/30/UE e RoHS 2011/65/UE. 2012/19/EU (Diretiva WEEE): os produtos marcados com este smbolo no podem ser descartados como rejeitos municipais no classicados na Unio Europeia. Para a reciclagem adequada, retorne este produto ao seu fornecedor local ao comprar um novo equipamento equivalente ou descarte-o em pontos de coleta designados. Para obter mais informaes, acesse: www.recyclethis.info 2006/66/EC (diretiva sobre baterias): este produto contm uma bateria que no pode ser descartada como um rejeito municipal no classicado na Unio Europeia. Rera-se documentao do produto para informaes especcas sobre baterias. A bateria marcada com este smbolo, que poder incluir letras para indicar cdmio (Cd), chumbo (Pb) ou mercrio (Hg). Para a reciclagem adequada, devolva a bateria ao fornecedor ou encaminhe-a a um ponto de coleta designado. Para obter mais informaes, consulte: www.recyclethis.info 1. No engula uma bateria, pois isso pode causar queimadura qumica interna. 2. Mantenha as baterias novas e usadas longe de crianas. 3. Se o compartimento das baterias no fechar com segurana, pare de usar o produto e o mantenha afastado de crianas. 4. Se voc acha que uma bateria pode ter sido engolida ou inserida em alguma parte do corpo, procure por atendimento mdico imediatamente. AVISO DE BATERIA CUIDADOS COM A BATERIA 1. Risco de incndio ou exploso se uma bateria for substituda por outra de tipo incorreto. 2. A substituio de uma bateria por outra de tipo incorreto pode anular uma proteo ou garantia (p. ex., no caso de alguns tipos de bateria de ltio). 3. No descarte as baterias em fogo ou forno quente nem as submeta a esmagamento ou corte mecnico, pois isso pode resultar em exploso. 4. No deixe as baterias em um ambiente de temperatura extremamente alta, pois isso pode resultar em exploso ou vazamento de lquido ou gs inamvel. 5. No exponha as baterias a uma presso do ar extremamente baixa, pois isso pode resultar em exploso ou vazamento de lquido ou gs inamvel. 6. Descarte as baterias usadas de acordo com as instrues. CUIDADOS NA INSTALAO A fora adicional deve ser igual a trs vezes o peso do equipamento, mas no inferior a 50 N. O equipamento e seus recursos de montagem associados devem permanecer seguros durante a instalao. Aps a instalao, o equipamento, incluindo qualquer placa de montagem associada, no pode estar danicado. UD20379B III IV 2 s 7 Times or PIR BG 1m 2m 4m 6m 8m 10m 12m 1m 2m 4m 6m 8m 10m 12m TEST TESTER 2 s Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China a. b.

(a) Detection Range 85.9 52 zones 4 planes

HIKVISION B. Wireless PIR-Glass Break Detector fl fl Model: DS-PDPG12P-EG2-WB UP: 3V=: 55mA Max SN: C12345678 UM INMAUV TAMU zeae Made in China FCC 1D:2ADTD-D0312021 Ay

FCC Warning Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference and

(2) this device must accept any interference received, including interference that may cause undesired operation. 1 oy a a i 5 2 8 3 z

50

a) b) c) d) e) f) g) Title:

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Hangzhou Hikvision Digital Technology Co., Ltd. No. 555 Qianmo Road, Binjiang District Hangzhou 310052, China Address Grantee Code FCC ID Contact Email Contact Phone Authorized Contact Name Xiuying Zhang 2ADTD 2ADTD-D0312021 zhangxiuying@hikvision.com

+86-571-88075998 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Date:2020/10/11 Applicant Signature:

Print Name:

Xiuying Zhang Senior Certification engineer

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Declaration Rev:0.0

Hangzhou Hikvision Digital Technology Co., Ltd. TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Date: 2020-10-10 Regarding: FCC ID: 2ADTD-D0312021 To whom it may concern:

We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Hangzhou Hikvision Digital Technology Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Xiuying Zhang Title: Senior Certification engineer Signature:

On behalf of Company: Hangzhou Hikvision Digital Technology Co., Ltd. Telephone: +86-0571-88075998-62460

Confidentiality Request regarding application for FCC ID: 2ADTD-D0312021 No. 555 Qianmo Road, Binjiang District, angzhou 310052, China SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Hangzhou Hikvision Digital Technology Co., Ltd. To:

From: Hangzhou Hikvision Digital Technology Co., Ltd. Regarding:

LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature:

Printed Name (on file with the FCC associated with the Grantee Code): Xiuying Zhang Title: Senior Certification engineer Company Name: Hangzhou Hikvision Digital Technology Co., Ltd.

Hangzhou Hikvision Digital Technology Co., Ltd. Current Date : 2020-10-11 To:

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. No. 588 West Jindu Road, Songjiang District, Shanghai, China. 201612 Dear Sir/Madam, Subject: Declaration Letter about Identity of Products

*WE (Hangzhou Hikvision Digital Technology Co., Ltd.) HEREBY DECLARED THAT Product Description Wireless PIR-Glass Break Detector Model No. DS-PDPG12P-EG2-WBUHK,DS-PDPG12P-EG2-WBCKV,DS-PDPG12P-E G2-WBUVS,DS-PDPG12P-EG2-WBKVO,DS-PDPG12P-EG2-WBHUN Manufacturers Name Hangzhou Hikvision Digital Technology Co., Ltd. Manufacturers Address No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China

*Except that the model number and appearance deviation, are identical with the original product as follows:

Note: The definition of identical should be electrically identical. A device will be considered to be electrically identical if no changes are made to the devices schematics, board layouts, component layouts, chip sets, resistors and all other electrical aspects of the device are identical. Model No. ():

DS-PDPG12P-EG2-WB Manufacturers Name ():

Hangzhou Hikvision Digital Technology Co., Ltd. Manufacturers Address):

No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Sincerely, Signature ():

Printed Name ():

Xiuying Zhang Position/Title ():

Senior Certification engineer Contact Number ():

+86-571-88075998