all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
User manual | Users Manual | 2.80 MiB | ||||
1 2 3 | External Photos | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | ID Label/Location Info | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | Test Setup Photos | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Cover Letter(s) | November 06 2012 | ||||||
1 2 3 | Cover Letter(s) | November 06 2012 | ||||||
1 2 3 | Cover Letter(s) | November 06 2012 | ||||||
1 2 3 | External Photos | November 06 2012 | ||||||
1 2 3 | ID Label/Location Info | November 06 2012 | ||||||
1 2 3 | External Photos | November 06 2012 |
1 2 3 | User manual | Users Manual | 2.80 MiB |
DFQW5645ZAT_CF-53mk2_7_OI_M.book 1 OPERATING INSTRUCTIONS Personal Computer Model No. CF-53 series Contents Getting Started Introduction.................................................2 Read Me First..............................................3
(Precautions) Description of Parts .....................................11 First-time Operation .....................................13 Useful Information On-screen Manual.......................................17 Handling and Maintenance.............................18 Reinstalling Software....................................20 Troubleshooting Troubleshooting (Basic) ................................22 Appendix LIMITED USE LICENSE AGREEMENT..............26 Specifications ............................................28 LIMITED WARRANTY ..................................32 d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A For further information about the com-
puter, you can refer to the on-screen manual. To access the on-screen manual
page 17 On-screen Manual Please read these instructions carefully before using this product, and save this manual for future use. DFQW5645ZAT_CF-53mk2_7_OI_M.book 2 Introduction Thank you for purchasing this Panasonic product. For optimum performance and safety, please read these instructions carefully.
Terms and illustrations in these instructions
CAUTION
NOTE Enter :
Fn + F5 :
(Start) - [All Programs]:
Conditions that may result in minor or moderate injury. Useful and helpful information. Press [Enter] key. Press and hold [Fn] key, and then press [F5] key. Click Page in these Operating Instructions or in the Reference Manual. Reference to the on-screen manuals.
(Start), and then click [All Programs].
Some illustrations are simplified to help your understanding and may look different from the actual unit.
If you do not log on as an administrator, you cannot use some functions or cannot display some screens.
Refer for the latest information about optional products to the catalogs, etc.
In these instructions, the names and terms are referred as follows. Genuine Windows 7 Professional 32-bit Service Pack 1 and Genuine Windows 7 Professional 64-bit Service Pack 1 as Windows or Windows 7 DVD MULTI drive as CD/DVD drive Circular media including DVD-ROM and CD-ROM as discs
Disclaimer Computer specifications and manuals are subject to change without notice. Panasonic Corporation assumes no liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manu-
als.
Trademarks Microsoft, Windows and the Windows logo are registered trademarks of Microsoft Corporation of the United States and/or other countries. Intel, Core, Centrino and PROSet are either registered trademarks or trademarks of Intel Corporation. SDXC Logo is a trademark of SD-3C, LLC. Adobe, the Adobe logo and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorpo-
rated in the United States and/or other countries. Bluetooth is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Panasonic Corporation. HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Roxio Creator is a trademark or registered trademark of Corel Corporation in the United states and/or other countries. Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective own companies. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A 2 DFQW5645ZAT_CF-53mk2_7_OI_M.book 3 Read Me First Important Safety Instructions
/ Importantes Mesures De Securite
<Only for model with modem>
When using your telephone equipment, basic safety precau-
tions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:
1. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. 2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 3. Do not use the telephone to report a gas leak in the vicinity of the leak. 4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. SAVE THESE INSTRUCTIONS Certaines mesures de scurit doivent tre prises pen-
dant lutilisation de matrial tlphonique afin de rduire les risques dincendie, de choc lectrique et de blessures. En voici quelquesunes:
1. Ne pas utiliser lappareil prs de leau, p.ex., prs dune baignoire, dun lavabo, dun vier de cuisine, dun bac laver, dans un sous-sol humide ou prs dune piscine. 2. viter dutiliser le tlphone (sauf sil sagit dun appareil sans fil) pendant un orage lectrique. Ceci peut prsenter un risque de choc lectrique caus par la foudre. 3. Ne pas utiliser lappareil tlphonique pour signaler une fuite de gaz sil est situ prs de la fuite. 4. Utiliser seulement le cordon dalimentation et le type de piles indiqus dans ce manual. Ne pas jeter les piles dans le feu: elles peuvent exploser. Se conformer aux rglements pertinents quant llimination des piles. CONSERVER CES INSTRUCTIONS 19-E-1 19-F-1 Information to the User
<Only for model with wireless LAN>
This product and your Health This product, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by this product however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones. Because this product operates within the guidelines found in radio frequency safety standards and recommendations, we believe this product is safe for use by consumers. These stan-
dards and recommendations reflect the consensus of the scien-
tific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of this prod-
uct may be restricted by the proprietor of the building or responsible representatives of the organization. These sit-
uations may for example include:
Using this product on board of airplanes, or
In any other environment where the risk of interference to other devices or services is perceived or identified as harmful. If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment
(e.g. airports), you are encouraged to ask for authoriza-
tion to use this product prior to turning on the product. Regulatory Information We are not responsible for any radio or television interfer-
ence caused by unauthorized modification of this product. The correction of interference caused by such unauthor-
ized modification will be the responsibility of the user. We and its authorized resellers or distributors are not liable for damage or violation of government regulations that may arise from failing to comply with these guidelines. 26-M-1
<Uniquement les modles avec rseau local sans fil et/ou Bluetooth>
Ce produit et votre sant Ce produit, comme tout autre appareil radio, met de lnergie radiolectrique. Toutefois, la quantit dnergie mise par ce produit est beaucoup moins importante que lnergie radiolectrique mise par des appareils sans fil tels que les tlphones portables. Lutilisation de ce produit ne comporte aucun risque pour le consommateur du fait que cet appareil opre dans les limites des direc-
tives concernant les normes et les recommandations de scurit sur les frquences radio. Ces normes et recom-
mandations refltent le consensus de la communaut sci-
entifique et rsultent de dlibrations de jurys et comits de scientifiques qui examinent et interprtent continuelle-
ment les nouveauts de la vaste littrature sur les recher-
ches effectues. Dans certaines situations ou environnements, lutilisation de ce produit peut tre restreinte par le propritaire du btiment ou par les reprsentants responsables de lorganisation. Ces situa-
tions peuvent tre les suivantes par exemple :
A bord dun avion, ou
Dans tout autre environnement o les risques dinter-
frence sur dautres appareils ou services sont perus ou identifiables comme dangereux. Si vous ntes pas sr de la rglementation applicable lutilisation dappareils sans fil dans une organisation ou un environnement spcifique, (par exemple dans un aro-
port) nous vous invitons demander lautorisation dutil-
iser ce produit avant sa mise en marche. Informations concernant la rglementation Nous dclinons toute responsabilit pour toute inter-
frence radio ou tlvision cause par des modifications non autorises apportes ce produit. La correction dinterfrences causes par de telles modifications non autorises sera la seule responsabilit de son utilisateur. Nousmmes, les revendeurs officiels et les distributeurs ne sommes pas responsable de tout dgt ou de toute violation des rglements de ltat pouvant dcouler du non-respect de ces directives. 26-F-1 d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A 3 DFQW5645ZAT_CF-53mk2_7_OI_M.book 4 Read Me First The following safety precautions must be observed during all phases of the operation, usage, service or repair of any Personal Computer or Handheld Computer incorporating wireless WAN modem. Manufacturers of the cellular ter-
minal are advised to convey the following safety informa-
tion to users and operating personnel and to incorporate these guidelines into all manuals supplied with the prod-
uct. Failure to comply with these precautions violates safety standards of design, manufacture and intended use of the product. Panasonic assumes no liability for customer failure to comply with these precautions. When in a hospital or other health care facility, observe the restrictions on the use of mobiles. Switch Personal Computer or Handheld Computer incorporating wireless WAN modem off, if instructed to do so by the guidelines posted in sensitive areas. Medical equipment may be sensitive to RF energy. The operation of cardiac pacemakers, other implanted medical equipment and hearing aids can be affected by interference from Personal Computer or Handheld Computer incorporating wireless WAN modem placed close to the device. If in doubt about potential danger, contact the physician or the manu-
facturer of the device to verify that the equipment is properly shielded. Pacemaker patients are advised to keep their Personal Computer or Handheld Com-
puter incorporating wireless WAN modem away from the pacemaker, while it is on. Switch off Personal Computer or Handheld Com-
puter incorporating wireless WAN modem before boarding an aircraft. Make sure it cannot be switched on inadvertently. The operation of wireless appli-
ances in an aircraft is forbidden to prevent interfer-
ence with communications systems. Failure to observe these instructions may lead to the suspen-
sion or denial of cellular services to the offender, legal action, or both. For details on usage of this unit in aircrafts please consult and follow instruction provided by the airline. Do not operate Personal Computer or Handheld Computer incorporating wireless WAN modem in the presence of flammable gases or fumes. Switch off the cellular terminal when you are near petrol sta-
tions, fuel depots, chemical plants or where blasting operations are in progress. Operation of any electri-
cal equipment in potentially explosive atmospheres can constitute a safety hazard. Your Personal Computer or Handheld Computer incorporating wireless WAN modem receives and transmits radio frequency energy while switched on. Remember that interference can occur if it is used close to TV sets, radios, computers or inadequately shielded equipment. Follow any special regulations and always switch off Personal Computer or Hand-
held Computer incorporating wireless WAN modem wherever forbidden, or when you suspect that it may cause interference or danger. Lithium Battery / Pile au lithium Lithium Battery!
This computer contains a lithium battery to enable the date, time, and other data to be stored. The battery should only be exchanged by authorized service personnel. Warning! A risk of explosion from incorrect installation or misapplication may possibly occur. Pile au lithium!
Le micro-ordinateur renferme une pile au lithium qui permet de sauvegarder certaines donnes, notamment la date et lheure. La pile ne doit tre remplace que par un technicien qualifi. Danger ! Risque dexplosion en cas de non respect de cette mise en garde!
15-E-1 15-F-1 CD/DVD Drive Caution
/ Prcautions pour le lecteur CD/DVD CAUTION!
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. 12-E-1 AVERTISSEMENT!
CET APPAREIL UTILISE UN LASER. LUTILISATION DE COMMANDES OU DE RGLAGES OU LEX-
CUTION DE PROCDURES AUTRES QUE CELLES SPCIFIES ICI PEUVENT PROVOQUER UNE EXPOSITION DES RADIA-
TIONS DANGEREUSES. NE PAS OUVRIR LES COUVERCLES NI ESSAYER DE RPARER SOIMME. CONFIER TOUT TRAVAIL DENTRETIEN UN PERSONNEL QUALIFI. 12-F-1 The following label is put on the bottom of the computer. Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols are only valid in the European Union. If you wish to dis-
card this product, please contact your local authorities or dealer and ask for the correct method of dis-
posal. 53-M-1 Safety Precautions
<Only for model with wireless WAN>
4 d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A DFQW5645ZAT_CF-53mk2_7_OI_M.book 5 Road safety comes fi rst! Do not use a Personal Computer or Handheld Computer incorporating wire-
less WAN modem while driving a vehicle. Do not place the computer with wireless WAN modem in an area where it could cause personal injury to the driver or passengers. It is recommended to stow the unit in the boot or secure stowage area while driving. Do not place the computer with wireless WAN modem in an area over an air bag or in the vicinity where an air bag may deploy. Air bags infl ate with great force and if the computer with wireless WAN modem is placed in the air bag deployment area may be propelled with great force and cause serious injury to occupants of the vehicle. IMPORTANT!
Personal Computer or Handheld Computer incorpo-
rating wireless WAN modem operate using radio sig-
nals and cellular networks cannot be guaranteed to connect in all conditions. Therefore, you should never rely solely upon any wireless device for essen-
tial communications, for example emergency calls. Remember, in order to make or receive calls, Per-
sonal Computer or Handheld Computer incorporat-
ing wireless WAN modem must be switched on and in a coverage area with adequate cellular signal strength. Some networks do not allow for emergency calls if certain network services or phone features are in use
(e.g. lock functions, fixed dialing etc.). You may need to deactivate those features before you can make an emergency call. Some networks require that a valid SIM card be properly inserted in Personal Computer or Handheld Computer incorporating wireless WAN modem. Models for U.S.A. Federal Communications Commission Radio Fre-
quency Interference Statement Note: This equipment has been tested and found to com-
ply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment gener-
ates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
Connect the equipment into an outlet on a circuit differ-
ent from that to which the receiver is connected.
Consult the Panasonic Service Center or an experi-
enced radio/TV technician for help. Warning To assure continued compliance, use only shielded inter-
face cables when connecting to a computer or peripheral. receiver. Also, any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired oper-
ation. FCC RF Exposure Warning:
This equipment is provided with PC Card slot that could be used with wireless transmitters, which will be specif-
ically recommended when they become available. Other third-party wireless transmitters have not been RF exposure evaluated for use with this computer and may not comply with FCC RF exposure requirements.
<Only for model with wireless LAN/Bluetooth>
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment has been approved for mobile opera-
tion, and unless otherwise advised in separate supple-
mental instructions for individual wireless transmitter(s), requires minimum 20cm spacing be pro-
vided between antenna(s) and all persons body
(excluding extremities of hands, wrist and feet) during wireless modes of operation.
This equipment may not be co-located or operated with any other antenna or transmitter.
<Only for model with wireless LAN>
This product is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range. FCC requires this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful inter-
ference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this product. 25-M-W-6 Responsible Party: Panasonic Corporation of North Amer-
ica One Panasonic Way Secaucus, NJ 07094 Tel No:1-800-LAPTOP5 (1-800-527-8675) 25-M-6 6-M-1
<Only for model with modem>
FCC Regulation Notice for modem This equipment contains a FCC approved modem. 1. This equipment complies with CFR47 Part 68 rules. On the computer is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If required, this information must be provided to the tele-
phone company. 2. An FCC compliant telephone cord and modular plug is provided with this equipment. This equipment is designed to be connected to the telephone network or premises wiring using a compatible modular jack which is Part 68 compliant. See Installation Instruc-
tions for details. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A 5 DFQW5645ZAT_CF-53mk2_7_OI_M.book 6 Read Me First 4. 3. The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all area, the sum of RENs should not exceed five (5.0). To be certain of the num-
ber of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. If your telephone equipment cause harm to the telephone network, the telephone company will notify you in advice that temporary discontinuance of service may be required. But if advice notice isnt practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. 5. The telephone company may take changes in its facili-
ties, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service. If trouble is experienced with this equipment, for repair or warranty information, please contact Panasonic Corporation of North America at DIAL TOLL FREE 1-800-LAPTOP5 (1-
800-527-8675). If the equipment is causing harm to the tele-
phone network, the telephone company may request that you disconnect the equipment until the problem is resolved. 7. There are no user serviceable parts contained in this 6. equipment. 8. This equipment may not be used on coin service pro-
vided by the telephone company. Connection to party lines is subject to state tariffs. 9. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone fax machine unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entry, or other individual sending the message and the telephone number of the sending machine or such business, other entity, or individual. In order to pro-
gram this information into your fax software, you should refer to the manual of the Fax software being used. 10.According to the FCCs electrical safety advisory, we recommend that you may install an AC surge arrestor in the AC outlet to which this equipment is connected. Telephone companies report that electrical surges, typ-
ically lightning transients, are very destructive to cus-
tomer terminal equipment connected to AC power sources and that this is a major nationwide problem. Caution : To reduce the risk of fire, use only No.26 AWG or larger (e.g., 24 AWG) UL listed or CSA certified tele-
communication line cord. ATTENTION : Pour rduire le risque dincendie, utiliser uniquement des conducteurs de tlcommunications 26 AWG ou de section suprieure (p. ex. 24 AWG) UL nu-
mrs ou CSA certifi. 16-M-1 FCC RF Exposure Warning:
This equipment is provided with external antenna connec-
tor(s) for connection to optional Car Mounter or Port Rep-
licator for mobile external mounted antenna(s). External antenna(s) must be professionally installed and cannot exceed recommended maximum antenna gain as described in individual provided supplement instructions for wireless transmitters. The Car Mounter is provided with Radiall/Larsen WLAN whip antenna, type NMO5E2400BKTNC with 5 dBi antenna gain. Also, user must maintain minimum 20 cm spacing between external antenna(s) and all persons body (excluding extremities of hands, wrist and feet) during wireless modes of operation. 32-M-1 USA Only: Disposal may be regulated in your commu-
nity due to environmental considerations. For disposal or recycling information, please visit Panasonic website:
http://www.panasonic.com/environmental or call 1-888-
769-0149 65-M-2 For U.S.A.-California Only This product contains a CR Coin Cell Lithium Bat-
tery which contains Perchlorate Material special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate/
38-M-1 Models for Canada
<Only for model with modem>
Industry Canada (IC) Notice for modem This equipment contains an Industry Canada approved modem unit. The Industry Canada label is affixed on the modem unit. EQUIPMENT ATTACHEMENT LIMITATIONS NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets tele-
communications network protective, operational and safety requirements as prescribed in the appropriate Ter-
minal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the users satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connec-
tion. The customer should be aware that compliance with the above conditions may not prevent degradation of ser-
vice in some situations. Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the elec-
trical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particu-
larly important in rural areas. Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate. NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be con-
nected to a telephone interface. The termination on an interface may consist of any combi-
nation of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5. REN: See bottom of the computer d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A 6 DFQW5645ZAT_CF-53mk2_7_OI_M.book 7 RESTRICTIONS CONCERNANT LE RACCORDEMENT DE MATRIEL AVIS: Ltiquette dIndustrie Canada identifie le matriel homologu. Cette tiquette certifie que le matriel est conforme aux normes de protection, dexploitation et de scurit des rseaux de tlcommunications, comme le prescrivent les documents concernant les exigences techniques relatives au matriel terminal. Le Ministre nassure toutefois pas que le matriel fonctionnera la satisfaction de lutilisateur. Avant dinstaller ce matriel, lutilisateur doit sassurer quil est permis de le raccorder aux installations de lentreprise locale de tlcommunication. Le matriel doit galement tre install en suivant une mthode accepte de raccordement. Labonn ne doit pas oublier quil est possible que la con-
formit aux conditions nonces ci-dessus nempche pas la dgradation du service dans certaines situations. Les rparations de matriel homologu doivent tre coor-
donnes par un reprsentant dsign par le fournisseur. Lentreprise de tlcommunications peut demander lutilisateur de dbrancher un appareil la suite de rpa-
rations ou de modifications effectues par lutilisateur ou cause de mauvais fonctionnement. Pour sa propre protection, lutilisateur doit sassurer que tous les fils de mise la terre de la source dnergie lec-
trique, des lignes tlphoniques et des canalisations deau mtalliques, sil y en a, sont raccords ensemble. Cette prcaution est particulirement importante dans les rgions rurales. Avertissement: Lutilisateur ne doit pas tenter de faire ces raccordements luimme; il doit avoir recours un service dinspection des installations lectriques, ou un lectricien, selon le cas. AVIS: Lindice dquivalence de la sonnerie (IES) assign chaque dispositif terminal indique le nombre maximal de terminaux qui peuvent tre raccords une interface. La terminaison dune interface tlphonique peut consister en une combinaison de quelques dispositifs, la seule condition que la somme dindices dquivalence de la sonnerie de touts les dispositifs nexcde pas 5. IES: Voir sous le fond de lordinateur Canadian ICES-003 This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. 17-Ca-1 7-M-2
<Only for model with wireless LAN/Bluetooth>
Industry Canada Operation is subject to the following two conditions;
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
<Ne sapplique quaux modles avec technologie Blue-
tooth/LAN sans fil/WAN sans fil>
Industrie Canada Cet quipement est conforme la norme CNR-210 dIndustrie Canada. Son fonctionnement estsoumis aux deux conditions suivantes :
(1) ce dispositif ne peut produire de brouillage, et
(2) ce dispositif doit accepter le brouillage, y compris le brouillage pouvant entraner le fonctionnement non dsir de lappareil. 30-Ca-1-1
<Only for model with wireless LAN>
This product (local network devices) for the band 5150-
5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users (mean-
ing they have priority) of 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LELAN devices.
<Ne sapplique quaux modles avec technologie LAN sans fil>
Cet appareil (pour rseaux locaux radiolectriques) dans les bandes de frquences 5150-5250 MHz est rserv une utilisa-
tion lintrieur afin de rduire le risque dinterfrence avec les systmes satellites mobiles bicanaux. Les radars forte puissance sont dsigns comme tant les pre-
miers utilisateurs (cest--dire quils ont la priorit) des bandes de frquences 5250-5350 MHz et 5650-5850 MHz. Ces stations radarspeuvent provoquer des interfrences et/ou des dom-
mages ce priphrique. 30-Ca-2-1 This device has been designed to operate with the Radiall/Lar-
sen whip antenna, type NMO5E2400BKTNC WLAN antenna having a maximum gain of 5 dBi. A WLAN Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The Required antenna impedance is 50 ohms. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication. Cet appareil est conu pour oprer avec lantenne-fouet Radiall/Larsen, type WLAN NMO5E2400BKTNC, ayant un gain maximum de 5 dB. Les rglements dIndustrie Canada interdisent lutilisation dune antenne WLAN dont le gain serait suprieur cette limite. Lantenne doit avoir une impdance de 50 ohms. Afin de rduire le risque dinterfrence radiolectrique aux autres utilisateurs des bandes de frquences, le type dantenne et son gain doivent tre tels que la puissance iso-
trope rayonne quivalente (PIRE) nest pas plus leve que le niveau requis pour assurer la communication. 25-Ca-1-1
<Only for model with wireless LAN/Bluetooth>
* This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment.
* This equipment has been approved for mobile operation, and unless otherwise advised in separate supplemental instructions for individual wireless transmitter(s), requires minimum 20 cm spacing be provided between antenna(s) and all persons body (excluding extremities of hands, wrist and feet) during wireless modes of operation.
<Ne sapplique quaux modles avec technologie Blue-
tooth/LAN sans fil/WAN sans fil>
* Cet quipement est conforme aux limites dexposition aux rayonnements dIndustrie Canada tablies pour un environnement non contrl.
* Cet quipement a t approuv des fins dopration mobile et, sauf indication contraire, dans une notice supplmentaire concernant les metteurs sans fil indi-
viduels, doit tre utilis en veillant quil y ait une dis-
tance dau moins 20 cm entre son(ses) antenne(s) et le corps de lutilisateur (sauf les extrmits : mains, poignets et pieds) dans les modes dopration sans fil. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A 7 DFQW5645ZAT_CF-53mk2_7_OI_M.book 8 Read Me First FOR USE WITH MODEL NO. : CF-AA5713A POUR UTILISER AVEC MODLE : CF-AA5713A 20-Ca-1 Models for Europe
<Only for model with a CE mark on the bottom of the computer>
Declaration of Conformity (DoC) Hereby, Panasonic declares that this Personal Computer is in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/EC. Hint:
If you want to get a copy of the original DoC of our above mentioned products, please contact our web address:
http://www.doc.panasonic.de Authorised Representative:
Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany Network connection of Wired Modem. The terminal equipment is intended for connection to the follow-
ing public network;
In all the countries of European Economical Area and Turkey;
- Public Switched Telephony Networks Technical Features of Wired Modem. The terminal equipment includes the following features;
- DTMF dialing
- Maximum bitrate receiving mode: 56 kbit/s
- Maximum bitrate sending mode: 33.6 kbit/s 18-E-1 d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A 8 Precautions THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS PART OF, NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAF-
FIC CONTROL EQUIPMENT/SYSTEMS, AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS *1, MEDICAL DEVICES OR ACCESSORIES*2, LIFE SUPPORT SYSTEMS OR OTHER EQUIPMENTS/DEVICES/SYSTEMS THAT ARE INVOLVED WITH ENSURING HUMAN LIFE OR SAFETY. PANASONIC WILL NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING FROM THE USE OF THIS PROD-
UCT ARISING OUT OF THE FOREGOING USES.
*1 AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2 Electrical Flight Bag (EFB) Systems and Class1 EFB Systems when used during critical phases of flight
(e.g., during take-off and landing) and/or mounted on to the aircraft. Class1 EFB Systems and 2 EFB Systems are defined by FAA: AC (Advisory Circular) 120-76A or JAA:
JAA TGL (Temporary Guidance Leaflets) No.36.
*2 As defined by the European Medical Device Directive
(MDD) 93/42/EEC. Panasonic cannot guarantee any specifications, tech-
nologies, reliability, safety (e.g. Flammability/Smoke/
Toxicity/Radio Frequency Emission, etc) requirements related to aviation standards and medical equipment standards that differ from the specifications of our COTS
(Commercial-Off-The-Shelf) products. This computer is not intended for use in medical equip-
ment including life-support systems, air traffic control sys-
tems, or other equipment, devices or systems that are involved with ensuring human life or safety. Panasonic cannot be held responsible in any way for any damages or loss resulting from the use of this unit in these types of equipment, devices or systems, etc. This computer has been designed so as to minimize shock to the LCD and hard disk drive, the leakage of liq-
uid (e.g., water) on to the keyboard, etc., but no warranty is provided against such trouble. Therefore, as a precision instrument, be extremely careful in the handling. If a Malfunction or Trouble Occurs, Immediately Stop Use If a Malfunction Occurs, Immediately Unplug the AC Plug and the Battery Pack This product is damaged Foreign object inside this product Smoke emitted Unusual smell emitted Unusually hot Continuing to use this product while any of the above con-
ditions are present may result in fire or electric shock. If a malfunction or trouble occurs, immediately turn the power off and unplug the AC plug, and then remove the battery pack. Then contact your technical support office for repair. Do Not Touch This Product In a Thunderstorm If Con-
nected with the AC Cable or Any Other Cables Electric shock may result. Do Not Connect the AC Adaptor to a Power Source Other Than a Standard Household AC Outlet Otherwise, a fire due to overheating may result. Connecting to a DC/AC converter (inverter) may damage the AC adaptor. On an airplane, only connect the AC adaptor/charger to an AC outlet specifically approved for such use. DFQW5645ZAT_CF-53mk2_7_OI_M.book 9 Do Not Do Anything That May Damage the AC Cord, the AC Plug, or the AC Adaptor Do not damage or modify the cord, place it near hot tools, bend, twist, or pull it forcefully, place heavy objects on it, or bundle it tightly. Continuing to use a damaged cord may result in fire, short circuit, or electric shock. Do Not Pull or Insert the AC Plug If Your Hands Are Wet Electric shock may result. Clean Dust and Other Debris of the AC Plug Regularly If dust or other debris accumulates on the plug, humidity, etc. may cause a defect in the insulation, which may result in a fire. Pull the plug, and wipe it with a dry cloth. Pull the plug if the computer is not being used for a long period of time. Insert the AC Plug Completely If the plug is not inserted completely, fire due to overheat-
ing or electric shock may result. Do not use a damaged plug or loose AC outlet. Do Not Place Containers of Liquid or Metal Objects on Top of This Product If water or other liquid spills, or if paper clips, coins, or foreign matter get inside this product, fire or electric shock may result. If foreign matter has found its way inside, immediately turn the power off and unplug the AC plug and remove the bat-
tery pack. Then contact your technical support office. Do Not Disassemble This Product The high-voltage areas inside may give you an electric shock, or foreign matter may enter and result in a fire. Keep SD Memory Cards Away from Infants and Small Children Accidental swallowing will result in bodily injury. In the event of accidental swallowing, see a doctor immediately. Do Not Place This Product on Unstable Surfaces If balance is lost, this product may fall over or drop, result-
ing in an injury. Avoid Stacking If balance is lost, this product may fall over or drop, result-
ing in an injury. Do Not Leave This Product in High Temperature Envi-
ronment for a Long Period of Time Leaving this product where it will be exposed to extremely high temperatures such as near fire or in direct sunlight may deform the cabinet and/or cause trouble in the inter-
nal parts. Continued use in such a resulting condition may lead to short-circuiting or insulation defects, etc. which may in turn lead to a fire or electric shocks. Do Not Block the Ventilation Hole (Exhaust) Using this product wrapped in cloth or on top of bedding or a blanket can block the ventilation hole and cause heat to build up inside, possibly resulting in a fire. Hold the Plug When Unplugging the AC Plug Pulling on the cord may damage the cord, resulting in a fire or electric shock. Do Not Move This Product While the AC Plug Is Connected The AC cord may be damaged, resulting in fire or electric shock. If the AC cord is damaged, unplug the AC plug immedi-
ately. Use Only the Specified AC Adaptor With This Product Using an AC adaptor other than the one supplied (sup-
plied with the unit or one sold separately as an accessory) may result in a fire. Do Not Subject the AC Adaptor to Any Strong Impact Using the AC adaptor after a strong impact such as being dropped may result in electric shock, short circuit, or fire. Take a Break of 10-15 Minutes Every Hour Using this product for long periods of time may have detri-
mental health effects on the eyes or hands. Do Not Look into the CD/DVD Drive Looking directly at the internal laser light source may result in damage to eyesight. Do Not Use Discs That Are Cracked or Deformed Because the discs rotate at high speeds, damaged discs may break apart causing injury. Discs that are not round and discs that have been repaired using adhesives are similarly dangerous, and so should not be used. Do Not Turn the Volume Up to Loud When Using Headphones Listening at high volumes that overstimulate the ear for long periods of time may result in loss of hearing. Do Not Connect a Telephone Line, or a Network Cable Other Than the One Specified, into the LAN Port If the LAN port is connected to a network such as the ones listed below, a fire or electric shock may result. Networks other than 1000BASE-T, 100BASE-TX or 10BASE-T Phone lines (IP phone (Internet Protocol Telephone), Telephone lines, internal phone lines (on-premise switches), digital public phones, etc.) Do Not Use With Exposing the Skin to This Product For a Long Period of Time Using this product with exposing the skin to the heat source of this product or AC adaptor for a long period of time can cause a low-temperature burn. Do not expose yourself to the hot wind from the venti-
lation hole (exhaust) for a long period of time. Low-temperature burns may result. Covering the ventilation hole (exhaust) with your hand or other object can cause heat to build up inside, possibly resulting in burns. Do Not Expose the Skin To This Product When Using the Product In A Hot Or Cold Environment. Burns, low-temperature burns, or frostbite may result. When it is necessary to expose the skin to this product such as to scan a fingerprint, perform the operation in the shortest time possible.
<Only for model with modem>
Use the Modem With a Regular Telephone Line Connection to an internal phone line (on-premise switches) of a company or business office, etc. or to a dig-
ital public phone or use in a country or area not supported by the computer may result in a fire or electric shocks.
Do not place the computer near a television or radio receiver.
Keep the computer away from magnets. Data stored on the hard disk may be lost.
This computer is not intended for the display of images for use in medical diagnosis.
This computer is not intended for a use with connection of medical equipment for the purpose of medical diagnosis.
Panasonic shall not be liable for loss of data or other incidental or consequential damages resulting from the use of this product. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A 9 DFQW5645ZAT_CF-53mk2_7_OI_M.book 10 Read Me First the first time. When the AC adaptor is connected to the computer, charging begins automatically.
Should the battery leak and the fluid get into your eyes, do not rub your eyes. Immediately flush your eyes with clear water and see a doctor for medical treatment as soon as possible. NOTE
The battery pack may become warm during recharging or normal use. This is completely normal.
Recharging will not commence if internal temperature of the battery pack is outside of the allowable tempera-
ture range (0 C to 50 C) ( Reference Manual Battery Power). Once the allowable range require-
ment is satisfied, charging begins automatically. Note that the recharging time varies based on the usage conditions. (Recharging takes longer than usual when the temperature is 10 C or below.)
If the temperature is low, the operating time is shortened. Only use the computer within the allowable temperature range.
This computer has a high temperature mode function that prevents the degradation of the battery in high tempera-
ture environments. ( Reference Manual Battery Power) A level corresponding to a 100% charge for high temperature mode is approximately equivalent to an 80%
charge level for normal temperature mode.
The battery pack is a consumable item. If the amount of time the computer can be run by using a particular battery pack becomes dramatically shorter and repeated recharging does not restore its performance, the battery pack should be replaced with a new one.
When transporting a spare battery inside a package, briefcase, etc., it is recommended that it be placed in a plastic bag so that its contacts are protected.
Always power off the computer when it is not in use. Leaving the computer on when the AC adaptor is not connected will exhaust the remaining battery capacity
( Reference Manual LAN). A lithium ion battery that is recycla-
ble powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery. Lappareil que vous vous tes pro-
cur est aliment par une batterie au lithium-ion. Pour des renseignements sur le recyclage de la batterie, veuillez composer le 1-800-8-BATTERY. 48-M-1 Precautions (Battery Pack) Do Not Use With Any Other Product The battery pack is rechargeable and was intended for the specified product. If it is used with a product other than the one for which it was designed, electrolyte leak-
age, generation of heat, ignition or rupture may result. Do Not Charge the Battery Using Methods Other Than Those Specified If the battery is not charged using one of the specified methods, electrolyte leakage, generation of heat, ignition or rupture may result. Do Not Throw the Battery Pack into a Fire or Expose It to Excessive Heat Generation of heat, ignition or rupture may result. Avoid Extreme Heat (Near the Fire, in Direct Sunlight, for Example) Electrolyte leakage, generation of heat, ignition or rupture may result. Do Not Insert Sharp Objects into the Battery Pack, Expose It to Bumps or Shocks, Disassemble, or Modify It Electrolyte leakage, generation of heat, ignition or rupture may result. If this product is subjected to a strong impact, stop using it immediately. Do Not Short the Positive (+) and Negative (-) Contacts Generation of heat, ignition or rupture may result. Do not place the battery pack together with articles such as necklaces or hairpins when carrying or storing. Do Not Use This Product With a Battery Pack Other Than the One Specified Use only the specified battery pack ( page 12) with your product. Use of battery packs other than those manufac-
tured and supplied by Panasonic may present a safety hazard (generation of heat, ignition or rupture). When battery pack has deteriorated, replace it with a new one Continued use of a damaged battery pack may result in heat generation, ignition or battery rupture. CAUTION:
Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions. ATTENTION:
Il y a risque dexplosion si la batterie est remplace par une batterie de type incorrect. Mettre au rebut les batteries usages conformment aux instructions. 58-E-1 58-F-1
Do not touch the terminals on the battery pack. The battery pack may no longer function properly if the contacts are dirty or damaged.
Do not expose the battery pack to water, or allow it to become wet.
If the battery pack will not be used for a long period of time (a month or more), charge or discharge (use) the battery pack until the remaining battery level becomes 30% to 40% and store it in a cool, dry place.
This computer prevents overcharging of the battery by recharging only when the remaining power is less than approx. 95% of capacity.
The battery pack is not charged when the computer is first purchased. Be sure to charge it before using it for d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A 10 DFQW5645ZAT_CF-53mk2_7_OI_M.book 11 Description of Parts A B C D E F G A H I J K C L M N O P Q R S T R U A : Wireless WAN antenna
<Only for model with wireless WAN>
Reference Manual Wireless WAN B : Bluetooth antenna
<Only for model with Bluetooth>
Reference Manual Bluetooth C : Speaker
Reference Manual Key Combinations D : Smart Card slot
<Only for model with Smart Card slot>
Reference Manual Smart Card E : CD/DVD Drive
Reference Manual CD/DVD Drive F : Wireless LAN antenna
<Only for model with wireless LAN>
Reference Manual Wireless LAN G : Wireless LAN antenna
<Only for model with wireless LAN and without GPS>
GPS antenna
<Only for model with GPS>
Reference Manual Wireless LAN H : Camera I : LCD
<Only for model with Camera>
Reference Manual Camera
<Only for model with touchscreen>
Reference Manual Touchscreen J : Power switch K : Function key
Reference Manual Key Combinations L : Wireless LAN antenna
<Only for model with wireless LAN and GPS>
Reference Manual Wireless LAN M : Fingerprint Reader
<Only for model with Fingerprint Reader>
Reference Manual Fingerprint Reader N : Keyboard O : LED indicator
: Caps lock
: Numeric key (NumLk)
: Scroll lock (ScrLk)
: Drive status
: SD Memory Card status
(Blinking: During access or a password is requested)
Reference Manual SD Memory Card
: Wireless ready This indicator lights when Wireless LAN, Blue-
tooth, and/or Wireless WAN are connected and ready. It does not necessarily indicate the On/Off condition of the wireless connection.
Wireless Communication Wireless LAN Blue-
tooth Wireless WAN Reference Manual Disabling/Enabling
: Battery status
Reference Manual Battery Power
: Power status
(Off: Power off/Hibernation, Green: Power on, Blinking green: Sleep, Blinking green rapidly:
Cannot power on or resume due to low tempera-
ture.) P : Microphone jack A condenser microphone can be used. If other types of microphones are used, audio input may not be pos-
sible, or malfunctions may occur as a result. Q : Headphone jack You can connect headphones or amplified speakers. When they are connected, audio from the internal speakers is not heard. R : Stylus Holder
<Only for model with touchscreen>
S : RFID Reader
<Only for model with RFID Reader>
Reference Manual RFID Reader T : Carrying handle U : Touch pad d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A 11 DFQW5645ZAT_CF-53mk2_7_OI_M.book 12 Description of Parts Right side Rear side A B C D E F Bottom G Q R S T
*3 Only for model with 2nd LAN
Reference Manual LAN
*4 Only for model with Modem Reference Manual Modem
*5 Only for model with IEEE 1394
Reference Manual IEEE 1394 Devices
*6 Only for model with Rugged USB 2.0 Port P : Serial port Q : Expansion bus connector Reference Manual Port Replicator R : RAM module slot Reference Manual RAM Module
S : Battery latch T : Hard disk drive Reference Manual Hard Disk Drive
NOTE
When you open the covers on the right side or the rear side, push down and pull the covers.
(Example: rear side)
This computer contains a magnet and magnetic prod-
ucts at the locations circled in the illustration at right. Avoid leaving metallic object or mag-
netic media in contact with these areas. H I J K L MN O P A : Battery pack Specified Battery pack: CF-VZSU71U B : ExpressCard slot*1 / PC Card slot*2
Reference Manual PC Card / ExpressCard
*1 Only for model with ExpressCard slot
*2 Only for model without ExpressCard slot C : PC Card slot Reference Manual PC Card / ExpressCard D : SD Memory Card slot Reference Manual SD Memory Card
E : Wireless switch
Reference Manual Disabling/Enabling Wireless Communication Wireless LAN Bluetooth Wireless WAN F : USB 3.0 port
Reference Manual USB Devices G : DC-IN jack H : LAN port
Reference Manual LAN I : USB 2.0 port
Reference Manual USB Devices J : HDMI Port
Reference Manual External Display K : VGA port
Reference Manual External Display L : Ventilation hole (Exhaust) M : Security lock A Kensington cable can be connected. For further information, read the manual that comes with the cable. N : SIM Card slot
<Only for model with Wireless WAN>
Reference Manual Wireless WAN O : 2nd LAN Port*3 / Modem Port*4 / IEEE 1394 Inter-
face Connector*5 / Rugged USB 2.0 Port*6 d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A 12 DFQW5645ZAT_CF-53mk2_7_OI_M.book 13 First-time Operation
Preparation A Check and identify the supplied accessories. If you do not find the described accessories, contact Panasonic Technical Support ( pages 32-36). AC Adaptor . 1 AC Cord . 1 Battery Pack . 1 Model No: CF-AA5713A Model No: CF-VZSU71U OPERATING INSTRUCTIONS (This book). 1
<Only for model with touchscreen>
Soft Cloth . 1 Stylus . 1 Tether . 1 B Read the LIMITED USE LICENSE AGREEMENT before breaking the seal on the computers packaging ( page 26).
( Reference Manual Touchscreen)
Inserting the Battery Pack A Reverse the computer, then press and hold the B Slide and remove the cover. C Insert the battery pack (B) until it securely fits the connector. D Slide the cover back. mark part (A).
To remove the battery pack In step C above, slide and hold the latch (C), and pull the tab (D) of the battery pack. CAUTION
Make sure the cover is securely attached. Otherwise the battery pack may fall when you carry the computer. NOTE
Note that the computer consumes electricity even when the computer power is off. If the battery pack is fully charged, the battery will fully discharge in the fol-
lowing period of time:
When power is off: Approx. 9 weeks In sleep: Approx. 3.5 days In hibernation: Approx. 9 days
When the DC plug is not connected to the computer, disconnect the AC cord from your AC wall outlet. Power is consumed simply by having the AC adaptor plugged into an electrical outlet. A 2 1 4 B 3 C D
Attaching the stylus to the computer
<Only for model with touchscreen>
Use the tether to attach the stylus to the computer so you will not lose it. There are holes (A) to attach it. 1 2 3 4 A CAUTION
Do not pull the tether with excessive force. The digitizer pen may hit the com-
puter, persons body or other objects when released. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A 13 DFQW5645ZAT_CF-53mk2_7_OI_M.book 14 First-time Operation
Opening the Display A 1
Setting up the computer 2 A Push the top of the latch (A) to release it. B Lift up the display to open. Insert the battery pack. ( page 13) 1
Do not touch the terminals of the battery pack and the computer. Doing so can make the terminals dirty or damaged, and may cause malfunction of the battery pack and the computer. Connect your computer to a power outlet.
Be sure to attach the cover for use. 2 The battery charging starts automatically. CAUTION
Do not disconnect the AC adaptor and do not switch the wireless switch to on until the first-time operation procedure is completed.
When using the computer for the first time, do not connect any peripheral device except the battery pack and AC adaptor.
Handling the AC adaptor Problems such as sudden voltage drops may arise during periods of thunder and lightning. Since this could adversely affect your computer, an uninterruptible power source (UPS) is highly recommended unless running from the battery pack alone. 3 Turn on the computer. A Confirm the wireless switch ( page 12) is OFF. B Press and hold the power switch
( page 11) until the power indicator
( page 11) lights. CAUTION
Do not press the power switch repeatedly.
The computer will be forcibly turned off if you press and hold the power switch for
Once you turn off the computer, wait for ten seconds or more before you turn on four seconds or longer. the computer again.
Do not perform the following operation until the drive indicator turns off. Connecting or disconnecting the AC adaptor Pressing the power switch Touching the keyboard, touch pad, touchscreen <only for model with touch-
screen> or external mouse Closing the display Turn on/off the wireless switch
When the CPU temperature is high, the computer may not start up to prevent overheating of the CPU. Wait until the computer cools down, and then turn the power on again. If the computer does not power on even after cooling down, contact Panasonic Technical Support ( pages 32-36). d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A 14 DFQW5645ZAT_CF-53mk2_7_OI_M.book 15 4 Setup Windows. A Follow the on-screen instructions.
The computer restarts several times. Do not touch the keyboard or touch pad, and wait until the drive indicator has turned off.
After the computer is turned on, the screen remains black or unchanged for a while, but this is not a malfunction. Wait for a moment until the Windows setup screen appears.
During setup of Windows, use the touch pad and clicking to move the cursor and to click an item.
Setup of Windows will take approximately 20 minutes. Go to the next step, confirming each message on the display.
Join a wireless network screen may not appear. You can set the Wireless Network after the setup of Windows is complete. has turned off. CAUTION
Wait until the drive indicator
You can change the user name, password, image and security setting after setup of Windows.
Do not use the following words and characters for user name: CON, PRN, AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9, @, &, space. In particular, if you create a user name (account name) that includes the @ mark, a password will be requested at the log-on screen, even if no password has been set. If you try to log on without entering a password, The user name or password is incorrect. may be displayed and you will not be able to log on to Windows ( page 23). 5
<Only for model with touchscreen>
Perform the touchscreen calibration.
Before performing the calibration, close Tablet PC Input Panel. NOTE
At first, log on to Windows as an administrator and perform this calibration.
Alternatively, you can perform the calibration from Dashboard for Panasonic PC.
( Reference Manual Dashboard for Panasonic PC)
(Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Setting]. A Click B Click [Calibrate]. C Using the stylus, touch each of the + target marks one by one, and then click [Yes]. D Click [OK]. NOTE
Perform the following calibration for each user.
Alternatively, you can perform the calibration from Dashboard for Panasonic PC.
( Reference Manual Dashboard for Panasonic PC)
(Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Setting]. A Click B Click [Calibrate]. C Using the stylus, touch each of the + target marks one by one, and then click [Yes]. D Click [OK].
Perform the calibration for the orientation to be used. NOTE
PC Information Viewer This computer periodically records the management information of the hard disk, etc. The maximum data volume for each record is 1024 bytes. This information is only used for estimating the cause when the hard disk goes down by any possibility. They are never sent to outside via network nor used for any other purpose except for the purpose described the above. To disable the function, add the check mark for [Disable the automatic save function for management information history]
in [Hard Disk Status] of PC Information Viewer, and click [OK].
( Reference Manual Checking the Computers Usage Status) d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A 15 DFQW5645ZAT_CF-53mk2_7_OI_M.book 16 First-time Operation
When Starting Up/Shutting Down Do not do the following Connecting or disconnecting the AC adaptor Pressing the power switch Touching the keyboard, touch pad, touchscreen <only for model with touchscreen> or external mouse Closing the display Turn on/off the wireless switch NOTE
To conserve power, the following power saving methods are set at the time of purchase. The screen automatically turns off after 10 minutes of inactivity. The computer automatically enters sleep*1 after 20 minutes of inactivity.
*1 Refer to Reference Manual Sleep and Hibernation Functions about resuming from sleep.
To change the partition structure You can shrink a part of an existing partition to create unallocated disk space, from which you can create a new partition. This computer has a single partition as default setting. A Click
(Start) and right-click [Computer], then click [Manage].
A standard user needs to enter an administrator password. B Click [Disk Management]. C Right-click the partition for Windows (c drive in the default setting), and click [Shrink Volume].
The partition size depends on the computer specifications. D Input the size in [Enter the amount of space to shrink in MB] and click [Shrink].
You cannot input a larger number than the displayed size.
To select [Reinstall to the first 3 partitions.] in reinstalling Windows 7 ( page 20), 30000 MB or more is nec-
essary for [Total size after shrink in MB]. E Right-click [Unallocated] (the shrunk space in the step D) and click [New Simple Volume]. F Follow the on-screen instructions to make the settings, and click [Finish]. Wait until formatting is completed. NOTE
You can create an additional partition using remaining unallocated space or newly creating unallocated space.
To delete a partition, right-click the partition and click [Delete Volume] in the step C. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A 16 DFQW5645ZAT_CF-53mk2_7_OI_M.book 17 On-screen Manual You can access the Reference Manual on the computer screen.
Reference Manual The Reference Manual contains the practical information to help you fully enjoy the computers performance. To access the Reference Manual:
on the desktop. Double-click
Alternatively click
(Start) - [All Programs] - [Panasonic] - [On-Line Manuals] - [Reference Manual].
Important Tips The Important Tips will provide you with the battery information so that you can use the battery pack in the optimum condition to obtain longer operation time. To access the Important Tips:
Double-click on the desktop.
Alternatively click
(Start) - [All Programs] - [Panasonic] - [On-Line Manuals] - [Important Tips]. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A 17 DFQW5645ZAT_CF-53mk2_7_OI_M.book 18 Handling and Maintenance Operation Environment
Place the computer on a flat stable surface not subject to shock, vibration, and danger of dropping. Do not place the computer upright or turn it over. If the computer is exposed to an extremely strong impact, it may become damaged.
Temperature:
Operation
: <Model without HDD heater> 0 C to 50 C {32 F to 122 F} (IEC60068-2-1, 2)*1
<Model with HDD heater> -10 C to 50 C {14 F to 122 F} (IEC60068-2-1, 2)*1
: -20 C to 60 C {- 4 F to 140 F}
: 30% to 80% RH (No condensation)
: 30% to 90% RH (No condensation) Storage Operation Storage Humidity:
Even within the above temperature/humidity ranges, operation for a long time in extreme environments, smoking nearby, or operation in places where oil is used or where there is a lot of dust will result in the product deterioration and will shorten the product life.
*1 Do not expose the skin to this product when using the product in a hot or cold environment. ( page 9) If the computer is wet in temperatures of 0 C {32 F} or below, freeze damage may occur. Make sure to dry off the computer in such temperatures.
Do not place the computer in the following areas, otherwise the computer may be damaged. Near electronic equipment. Image distortion or noise may occur. In extremely high or low temperature.
As the computer can become hot during operation, keep it away from items that are sensitive to heat. Handling Cautions This computer is designed to minimize shock to parts such as the LCD and the hard disk drive and equipped with a drip-proof keyboard, but no warranty is provided against any trouble caused by shock. Be extremely careful when handling the computer.
When carrying the computer:
Turn off the computer. Remove all external devices, cables, PC Cards and other protruding objects. Remove a disc in the CD/DVD drive. Do not drop or hit the computer against solid objects. Do not leave the display open. Do not grip the display part.
Do not put anything (e.g., a piece of paper) between the display and keyboard.
When you board an airplane, take the computer with you and never put it in your checked luggage. When using the computer on airplane, follow the airlines instructions.
When carrying a spare battery, put it in a plastic bag to protect its terminals.
The touch pad is designed to be used by finger tip. Do not place any object on its surface and do not press down strongly with sharp-pointed or hard objects that may leave marks (e.g., nails, pencils and ball point pens).
Avoid any harmful substances such as oil from getting into the touch pad. The cursor may not work correctly.
Be careful not to get injured by dropping or getting hit when carrying the computer.
<Only for model with touchscreen>
Use only the included stylus to touch the touchscreen. Do not place any object on its surface and do not press down strongly with sharp-pointed or hard objects that may leave marks (e.g., nails, pencils and ball point pens).
Do not use the touchscreen when dust or dirt (e.g., oil) is on the screen. Otherwise foreign particles on the screen/
stylus can scratch the screen surface or obstruct the stylus operation.
Use the stylus only for touching the screen. Using it for any other purpose may damage the stylus and result in scratches on the screen.
When using peripheral devices Follow these instructions and the Reference Manual to avoid any damage to the devices. Carefully read the instruction manuals of the peripheral devices.
Use the peripheral devices conforming to the computers specifications.
Connect to the connectors in the correct direction.
If it is hard to insert, do not try forcibly but check the connectors shape, direction, alignment of pins, etc.
If screws are included, fasten them securely.
Remove the cables when you carry the computer. Do not pull the cables forcibly.
Preventing your computer from unauthorized use via wireless LAN/Bluetooth/Wireless WAN
<Only for model with wireless LAN/Bluetooth/Wireless WAN>
Before using wireless LAN/Bluetooth/Wireless WAN, make the appropriate security settings such as data encryption. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A 18 DFQW5645ZAT_CF-53mk2_7_OI_M.book 19
Battery Recalibration
The battery recalibration may take a long time due to the large battery capacity. This is not a malfunction. Full charge: Approximately 2 hours Complete discharge: Approximately 2 hours Maintenance If drops of water or other stains get on the surface of the LCD panel, wipe them off immediately. Failure to do so may result in staining. To clean the LCD panel
<Only for model with touchscreen>
Use the soft cloth included with the computer. (For further information, refer to Suggestions About Cleaning the LCD Surface
<Only for model without touchscreen>
Wipe with a soft dry cloth such as gauze. Reference Manual Touchscreen.) To clean areas other than the LCD panel Wipe with a soft dry cloth such as gauze. When using detergent, dip a soft cloth in water-diluted detergent and wring it thoroughly. CAUTION
Do not use benzene, thinner, or rubbing alcohol since it may adversely affect the surface causing discoloration, etc. Do not use commercially-available household cleaners and cosmetics, as they may contain components harmful to the surface.
Do not apply water or detergent directly to the computer, since liquid may enter inside of the computer and cause malfunction or damage. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A 19 DFQW5645ZAT_CF-53mk2_7_OI_M.book 20 Reinstalling Software Reinstalling software will return the computer to the default condition. When you reinstall the software, the hard disk data will be erased. Back up important data to other media or an external hard disk before reinstallation. CAUTION
Do not delete the recovery partition on the hard disk. The disk space in the partition is not available to store data. Hard disk HDD Recovery partition Recovery partition Area usable by Windows
Hard Disk Recovery Preparation
Remove all peripherals.
Connect the AC adaptor and do not remove it until reinstallation is complete. Turn on the computer, and press F2 or Del while [Panasonic] boot screen is displayed. The Setup Utility starts up. If the [Panasonic] boot screen is not displayed, turn on the computer while holding down F2 or Del. If the password is requested, enter the Supervisor Password. 2 Write down all of the contents of the Setup Utility and press F9. At the confirmation message, select [Yes] and press Enter. Press F10. At the confirmation message, select [Yes] and press Enter. Computer will restart. Press F2 or Del while [Panasonic] boot screen is displayed. The Setup Utility starts up. If the password is requested, enter the Supervisor Password. Select the [Exit] menu, then select [Recovery Partition] and press Enter. Click [Reinstall Windows] and click [Next]. The License Agreement screen appears. Click [Yes, I agree to the provisions above and wish to continue!] and click [Next]. Select the settings and click [Next].
[Reinstall Windows to the whole Hard Disk to factory default.]
Select this option when you want to reinstall Windows to the factory default. After reinstallation, you can create a new partition. For how to create a new partition, refer to To change the partition structure ( page 16)
[Reinstall to the System and OS partitions.]*1 Select this option when the hard disk has already been divided into several partitions. For how to create a new partition, refer to To change the partition structure ( page 16). You can keep the partition structure.
*1 This does not appear if Windows cannot be reinstalled to the partition containing boot files and the area usable by Windows. 9 At the confirmation massage, click [YES]. 10 Select OS (32bit or 64bit) and click [OK]. 11 At the confirmation message, click [OK]. Reinstallation starts according to the instructions on the screen. Do not interrupt reinstallation, for example by turning off the computer. Otherwise reinstallation may become unavailable as Windows may not start up or the data may be corrupted. 12 When Ending process. is displayed, click [OK] to turn off the computer. 13 Turn on the computer. If the password is requested, enter the Supervisor Password. 14 Perform the First-time Operation ( page 15). 15 Start the Setup Utility and change the settings as necessary. 16 Perform Windows Update. 1 3 4 5 6 7 8 d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A 20 DFQW5645ZAT_CF-53mk2_7_OI_M.book 21
Using Recovery Disc Use the Recovery Disc for reinstallation in the following conditions. You have forgotten the administrator password. Reinstallation is not complete. The recovery partition may be broken. NOTE To change OS from 32-bit to 64-bit, or vice versa, reinstall OS using the recovery partition in the hard disk. Preparation 1 Reference Manual Recovery Disc Creation Utility)
Prepare the Recovery Disc (
Remove all peripherals.
Connect the AC adaptor and do not remove it until reinstallation is complete. Turn on the computer, and press F2 or Del while [Panasonic] boot screen is displayed. The Setup Utility starts up. If the [Panasonic] boot screen is not displayed, turn on the computer while holding down F2 or Del. If the password is requested, enter the Supervisor Password. 2 Write down all of the contents of the Setup Utility and press F9. 3 4 5 6 7 8 At the confirmation message, select [Yes] and press Enter. Press F10. At the confirmation message, select [Yes] and press Enter. Computer will restart. Press F2 or Del while [Panasonic] boot screen is displayed. The Setup Utility starts up. If the password is requested, enter the Supervisor Password. Set the Recovery Disc into the CD/DVD drive. Select the [Exit] menu, then select [Slimtype DVD...] in [Boot Override]. Press Enter. The computer will restart. Click [Reinstall Windows] and click [Next]. The License Agreement screen appears. Click [Yes, I agree to the provisions above and wish to continue!] and click [Next]. 9 10 Select the settings and click [Next].
[Reinstall Windows to the whole Hard Disk to factory default. Select this option when you want to reinstall Windows to the factory default. After reinstallation, you can create a new partition. For how to create a new partition, refer to To change the partition structure ( page 16)
[Reinstall to the first 3 partitions.]*2 Select this option when the hard disk has already been divided into several partitions. For how to create a new partition, refer to To change the partition structure ( page 16). You can keep the partition structure.
*2 This does not appear if Windows cannot be reinstalled to the partition containing boot files and the area usable by Windows. 11 At the confirmation message, click [YES]. Reinstallation starts. (It will take approximately 70 minutes.) According to the screen, replace the Recovery Disc. Do not interrupt reinstallation, for example by turning off the computer. Otherwise reinstallation may become unavailable as Windows may not start up or the data may be corrupted. 12 When Ending process. is displayed, remove the Recovery Disc, and then click [OK]
13 to turn off the computer. Turn on the computer. If the password is requested, enter the Supervisor Password. 14 Perform the First-time Operation ( page 15). 15 Start the Setup Utility and change the settings as necessary. 16 Perform Windows Update. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A 21 DFQW5645ZAT_CF-53mk2_7_OI_M.book 22 Troubleshooting (Basic) Follow the instructions below when a problem has occurred. There is also an advanced troubleshooting guide in the Reference Manual. For a software problem, refer to the softwares instruction manual. If the problem persists, contact Panasonic Technical Support ( pages 32-36). You can also check the computers status in the PC Information Viewer
( Reference Manual Checking the Computers Usage Status).
Starting Up Cannot start up. The power indicator or bat-
tery indicator is not lit.
Connect the AC adaptor.
Insert a fully charged battery.
Remove the battery pack and the AC adaptor, then connect them again.
Even if the AC adaptor and battery pack are correctly connected, if the battery indi-
cator is not lit, the AC adaptor protection function may be operating. Disconnect the AC cord, wait three minutes or more, and reconnect the AC cord. The power is turned on but Warming up the system (up to 30 minutes) appears. Cannot turn on the computer. The computer does not resume from sleep.
(The power indicator blinks quickly in green.) After adding or changing the RAM module, the power is turned on but nothing is displayed on the screen. The computer does not enter sleep mode while the screen saver is running (The screen stays black). It takes time for the power indicator to light up. You have forgotten the password. Remove disks or other media. Press any key to restart or a similar mes-
sage appears. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A 22
If a device is connected to the USB port, disconnect the device, or set [USB Port] or
[Legacy USB Support] to [Disabled] in the [Advanced] menu of the Setup Utility.
If a device is connected to the ExpressCard slot, disconnect the device, or set [Express-
Card Slot] to [Disabled] in the [Advanced] menu of the Setup Utility.
The computer is warming up before start up. Wait for the computer to start up (takes up to 30 minutes). If, Cannot warm up the system is displayed, the computer failed to warm up and does not start. In this case, turn off the computer, leave it in an envi-
ronment of 5 C {41 F} or higher temperature for about an hour, and then turn on the power once more.
Leave it in an environment of 5 C {41 F} or higher temperature for about an hour, then turn on the power once more.
Turn off the computer and remove the RAM module, then confirm whether the RAM module has conformed to specification. When the RAM module has conformed to specification, install it again.
Press and hold the power switch for four seconds or longer to shut down the com-
puter forcibly. (Data not saved will be lost.) Then disable the screen saver.
If the power switch is pressed immediately after the battery pack has been mounted on the computer, and while the AC adaptor is not connected, it may take about five seconds before the power indicator lights up and the computer turns on. This is because the computer is checking the remaining battery charge; it is not a malfunc-
tion.
Supervisor Password or User Password: Contact Panasonic Technical Support
( pages 32-36).
Administrator password:
If you have another account with Administrator authority, log-on with it, then delete the password for the problem account. If you have a password reset disk, click [Reset password] displayed after the password input error, then follow the on-screen instructions and set a new pass-
word. If you cannot do either of the above, you will need to reinstall ( page 20) and setup Windows.
A floppy disk in the drive or USB memory is connected, and it does not contain system startup information. Remove the floppy disk and USB memory, then press any key.
If a device is connected to the USB port, disconnect the device, or set [USB Port] or
[Legacy USB Support] to [Disabled] in the [Advanced] menu of the Setup Utility.
If a device is connected to the ExpressCard slot, disconnect the device, or set [Express-
Card Slot] to [Disabled] in the [Advanced] menu of the Setup Utility.
<Only for model with ExpressCard slot>
If the problem persists after removing the disk, it may be a hard disk failure. Contact Panasonic Technical Support ( pages 32-36). DFQW5645ZAT_CF-53mk2_7_OI_M.book 23
Starting Up Windows startup and opera-
tion is slow. The date and time are incor-
rect.
[Executing Battery Recali-
bration] screen appears.
[Enter Password] does not appear when resuming from sleep / hibernation. Cannot resume. Other startup problems.
Entering Password Even after entering the password, password input screen is displayed again.
Press F9 in the Setup Utility ( Reference Manual Setup Utility) to return the Setup Utility settings (excluding the passwords) to the default values. Start the Setup Utility and make the settings again. (Note that the processing speed depends on the application software, so this procedure may not make Windows faster.)
If you installed a resident software after purchase, turn off the residence.
Make the correct settings. Click
(Start) - [Control Panel] - [Clock, Language, and Region] - [Date and Time].
If the problem persists, the internal clock battery may need to be replaced. Contact Panasonic Technical Support ( pages 32-36).
When the computer is connected to LAN, check the date and time of the server.
The 2100 A.D. or later year will not be correctly recognized on this computer.
The Battery Recalibration was canceled before Windows was shut down last time. To start up Windows, turn off the computer by the power switch, and then turn on.
Select [Enabled] in [Password On Resume] in the [Security] menu of the Setup Utility
( Reference Manual Setup Utility).
The Windows password can be used instead of the password set in the Setup Utility.
(Start) - [Control Panel] - [User Accounts and Family Safety] - [Add or A Click remove user accounts] and select the account, and set the password. B Click
(Start) - [Control Panel] - [System and Security] - [Power Options] -
[Require a password on wakeup] and add a check mark for [Require a password].
An error may occur when the computer automatically enters the sleep or hibernation mode while the screen saver is active. In this case, turn off the screen saver or change the pattern of the screen saver.
Press F9 in the Setup Utility ( Reference Manual Setup Utility) to return the Setup Utility settings (excluding the passwords) to the default values. Start the Setup Utility and make the settings again.
Remove all peripheral devices.
Check to see if there was a disk error. A Remove all peripheral devices including an external display. B Click C Click [Tools] - [Check Now...].
(Start) - [Computer] and right-click [Local Disk (C:)], and click [Properties]. A standard user needs to enter an administrator password. D Select the option in [Check disk options] and click [Start]. E Click [Schedule disk check] and restart the computer.
The computer may be in ten-key mode. If the NumLk indicator lights, press NumLk to disable the ten-key mode, and then input.
The computer may be in Caps Lock mode. lights, press Caps Lock to disable the Caps Lock If the Caps Lock indicator mode, and then input. Cannot log on to Windows.
(The user name or pass-
word is incorrect is dis-
played.)
The user name (account name) includes an @ mark. If another user account exists:
Log on to Windows using another user account, and delete the account that includes @. Then create a new account. If no other account exists:
You need to reinstall Windows ( page 20).
Shutting down Windows does not shut down.
Remove the USB device and the ExpressCard.
Wait one or two minutes. It is not a malfunction. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A 23 DFQW5645ZAT_CF-53mk2_7_OI_M.book 24 Troubleshooting (Basic)
Display No display. The screen is dark. The screen is disordered. During Simultaneous dis-
play, one of the screens becomes disordered.
The external display is selected. Press Fn + F3 or
+ P to switch the display. Wait until the display has been switched completely before pressing Fn + F3 or
+ P again.
When using an external display, Check the cable connection. Turn on the display. Check the settings of external display. direct selection keys, but press any other key like Ctrl.
The display is turned off by the power-saving function. To resume, do not press the
The computer entered sleep or hibernation by the power-saving function. To resume, press the power switch.
The screen is darker when the AC adaptor is not connected. Press Fn + F2 and adjust the brightness. As you increase the brightness, battery consumption increases. You can separately set the brightness for when the AC adaptor is connected and when not connected.
Press Fn + F8 to turn off the concealed mode.
Changing the number of display colors and resolution may affect the screen. Restart
Connecting/disconnecting an external display may affect the screen. Restart the
Resuming from sleep or hibernation may affect the screen of the external display. the computer. computer. Restart the computer.
When using the Extended Desktop, use the same display colors for the external dis-
play as those used by the LCD. If you continue to experience problems, try changing the display. Right-click on the desktop, and click [Graphics Properties...] - [Display].
Simultaneous display cannot be used until Windows startup is complete (during Setup Utility, etc.).
If the external display does not support the power saving function, it may not work nor-
mally when the computer enters the power saving mode. Turn off the external display.
When using the external mouse, connect it correctly.
Restart the computer using the keyboard. Press and press twice, and press to select [Restart] and press Enter.
If the computer does not respond to keyboard commands, read No response
( page 25). The external display does not work normally.
Touch Pad / Touchscreen (only for model with touchscreen) The cursor does not work. Cannot input using the touch pad.
<Only for model with touchscreen>
Cannot input using the touchscreen. Cannot point the correct position using the included stylus.
Set [Touch Pad] to [Enabled] in the [Main] menu of the Setup Utility.
The drivers for some mice may disable the touch pad. Check your mouses operat-
ing instructions.
Set [Touchscreen Mode] to [Auto] or [Tablet] in the [Main] menu of the Setup Utility.
Perform the touchscreen calibration ( page 15). d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A 24 DFQW5645ZAT_CF-53mk2_7_OI_M.book 25
On-screen Document The document of PDF for-
mat is not displayed.
Install Adobe Reader. A Log on to Windows as an administrator. B Click programs and files] then press Enter.
(Start) and input c:\util\reader\AdbeRdr1001_en_US.exe in [Search C Update Adobe Reader to its latest version. If your computer is connected to the internet, start up Adobe Reader and click
[Help] - [Check for Updates...].
CD/DVD Drive The tray does not come out although inserting a pointed object to the emergency hole.
A pin of 1.3 mm in diameter is recommended to remove a disc using the emergency hole (A). When the diameter of the pin is smaller than this, insert the pin slightly downward. A
Others No response.
Press Ctrl+Shift+Esc to open Task Manager and close the software application that is not responding.
An input screen (e.g., password input screen at startup) may be hidden behind another window. Press Alt+Tab to check.
Press the power switch for four seconds or longer to shut down the computer, and then press the power switch to turn it on. If the application program does not work normally, uninstall and reinstall the program. To uninstall, click
(Start) - [Control Panel] - [Uninstall a program]. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A 25 DFQW5645ZAT_CF-53mk2_7_OI_M.book 26 LIMITED USE LICENSE AGREEMENT THE SOFTWARE PROGRAM(S) (PROGRAMS) FURNISHED WITH THIS PANASONIC PRODUCT (PRODUCT) ARE LICENSED ONLY TO THE END-USER (YOU), AND MAY BE USED BY YOU ONLY IN ACCORDANCE WITH THE LICENSE TERMS DESCRIBED BELOW. YOUR USE OF THE PROGRAMS SHALL BE CONCLUSIVELY DEEMED TO CONSTITUTE YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE. Panasonic Corporation has developed or otherwise obtained the Programs and hereby licenses their use to you. You assume sole responsibility for the selection of the Product (including the associated Programs) to achieve your intended results, and for the installation, use and results obtained therefrom. LICENSE A. Panasonic Corporation hereby grants you a personal, non-transferable and non-exclusive right and license to use the Programs in accordance with the terms and conditions stated in this Agreement. You acknowledge that you are receiving only a LIMITED LICENSE TO USE the Programs and related documentation and that you shall obtain no title, ownership nor any other rights in or to the Programs and related documentation nor in or to the algorithms, con-
cepts, designs and ideas represented by or incorporated in the Programs and related documentation, all of which title, ownership and rights shall remain with Panasonic Corporation or its suppliers. B. You may use the Programs only on the single Product which was accompanied by the Programs. C. You and your employees and agents are required to protect the confidentiality of the Programs. You may not distrib-
ute or otherwise make the Programs or related documentation available to any third party, by time-sharing or other-
wise, without the prior written consent of Panasonic Corporation. D. You may not copy or reproduce, or permit to be copied or reproduced, the Programs or related documentation for any purpose, except that you may make one (1) copy of the Programs for backup purposes only in support of your use of the Programs on the single Product which was accompanied by the Programs. You shall not modify, or attempt to modify, the Programs. E. You may transfer the Programs and license them to another party only in connection with your transfer of the single Product which was accompanied by the Programs to such other party. At the time of such a transfer, you must also transfer all copies, whether in printed or machine readable form, of every Program, and the related documentation, to the same party or destroy any such copies not so transferred. F. You may not remove any copyright, trademark or other notice or product identification from the Programs and you must reproduce and include any such notice or product identification on any copy of any Program. YOU MAY NOT REVERSE ASSEMBLE, REVERSE COMPILE, OR MECHANICALLY OR ELECTRONICALLY TRACE THE PROGRAMS, OR ANY COPY THEREOF, IN WHOLE OR IN PART. YOU MAY NOT USE, COPY, MODIFY, ALTER, OR TRANSFER THE PROGRAMS OR ANY COPY THEREOF, IN WHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED IN THE LICENSE. IF YOU TRANSFER POSSESSION OF ANY COPY OF ANY PROGRAM TO ANOTHER PARTY, EXCEPT AS PER-
MITTED IN PARAGRAPH E ABOVE, YOUR LICENSE IS AUTOMATICALLY TERMINATED. TERM This license is effective only for so long as you own or lease the Product, unless earlier terminated. You may terminate this license at any time by destroying, at your expense, the Programs and related documentation together with all cop-
ies thereof in any form. This license will also terminate effective immediately upon occurrence of the conditions thereof set forth elsewhere in this Agreement, or if you fail to comply with any term or condition contained herein. Upon any such termination, you agree to destroy, at your expense, the Programs and related documentation together with all cop-
ies thereof in any form. YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. YOU FURTHER AGREE THAT IT IS THE COMPLETE AND EXCLUSIVE STATE-
MENT OF THE AGREEMENT BETWEEN US, WHICH SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT, ORAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN US, RELATING TO THE SUBJECT MAT-
TER OF THIS AGREEMENT. GOVERNMENT RESTRICTED RIGHTS. The Software is provided with RESTRICTED RIGHTS. Use duplication or disclosure by the government is sub-
ject to restrictions as set forth in FAR52.227-14 and DFAR252. 227-7013 et seq. or their successors. Use of the Software by the government constitutes acknowledgement of Intels proprietary rights therein. Contractor or Manufacturer is Intel Corporation, 2200 Mission College Blvd., Santa Clara, CA 95052. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A 26 DFQW5645ZAT_CF-53mk2_7_OI_M.book 27 Contrat de licence dusage limit Le(s) logiciel(s) (les Logiciels) fournis avec ce produit Panasonic (le Produit) sont exclusivement concds en licence lutilisateur ultime (vous), et ils ne peuvent tre utiliss que conformment aux clauses contractuelles cidessous. En utilisant les logiciels, vous vous engagez de manire dfinitive respecter les termes, clauses et conditions des prsentes. Panasonic Corporation a mis au point ou obtenu les Logiciels et vous en concde lutilisation par les prsentes. Vous assumez lentire responsabilit du choix de ce Produit (y compris des Logiciels associs) pour obtenir les rsultats escompts, ainsi que de linstallation, de lutilisation et des rsultats obtenus. Licence A. Panasonic Corporation vous octroie par les prsentes le droit et la licence personnels, non cessibles et non exclusifs dutiliser les Logiciels conformment aux termes, clauses et conditions de ce contrat. Vous reconnaissez ne recevoir quun droit limit dutiliser les Logiciels et la documentation les accompagnant et vous vous engagez nobtenir aucun droit de titre, proprit ni aucun autre droit vis--vis des Logiciels et de la documentation les accompagnant ni vis--vis des algorithmes, concepts, dessins, configurations et ides reprsents par ou incorpors dans les Logiciels et la documentation les accompagnant, dont les titres, la proprit et les droits resteront tous Panasonic Corporation ou leurs propritaires. B. Vous ne pouvez utiliser les Logiciels que sur le Produit unique qui est accompagn par les Logiciels. C. Vous et vos employs ou agents tes requis de protger la confidentialit des Logiciels. Vous ne pouvez ni distribuer ni mettre les Logiciels et la documentation les accompagnant la disposition dun tiers, par partage de temps ou de quelque autre manire que ce soit, sans lautorisation crite pralable de Panasonic Corporation. D. Vous ne pouvez ni copier ni reproduire ni permettre la copie ni la reproduction des Logiciels ni de la documentation les accompagnant pour quelque fin que ce soit, lexception dune (1) copie des Logiciels des fins de sauvegarde uniquement pour soutenir votre utilisation des Logiciels sur le Produit unique qui est accompagn par les Logiciels. Vous ne pouvez ni modifier ni tenter de modifier les Logiciels. E. Vous ne pouvez cder les Logiciels et en octroyer la licence une autre partie quen rapport avec votre cession du Produit unique qui est accompagn par les Logiciels cette autre partie. Au moment de cette cession, vous devez cder galement toutes les copies, que ce soit sous forme imprime ou lisible par la machine, de tous les Logiciels ainsi que de la documentation les accompagnant, la mme partie ou dtruire les copies non cdes. F. Vous ne pouvez retirer aucune marque de droits dauteur, marque de commerce ou autre ni aucune identification de produit des Logiciels et vous devez reproduire et inclure toutes ces notices ou identifications de produit sur toutes les copies des Logiciels. Vous ne pouvez assembler en sens inverse, compiler en sens inverse ni retracer les Logiciels ni aucune de leurs copies, de faon lectronique ou mcanique, en tout ou en partie. Vous ne pouvez utiliser, copier, modifier, altrer ni cder les Logiciels ni aucune de leurs copies, en tout ou en partie, lexception de ce qui est expressment stipul dans ce contrat. Si vous cdez la possession de toute copie ou de tout Logiciel une autre partie, lexception de ce qui est autoris au paragraphe E ci-dessus, votre licence est automatiquement rsilie. Termes, clauses et conditions Cette licence nest effective que pour la dure de possession ou de crdit-bail du Produit, moins dune rsiliation antrieure. Vous pouvez rsilier cette licence tout moment en dtruisant, vos frais, les Logiciels et la documentation les accompagnant avec toutes leurs copies, sous quelque forme que ce soit. Cette licence sera galement rsilie, avec application immdiate, si les conditions de rsiliation dfinies ailleurs dans ce contrat se sont ralises ou si vous ne respectez pas les termes, clauses et conditions qui y sont contenues. Au moment de la rsiliation, vous acceptez de dtruire, vos frais, les Logiciels et la documentation les accompagnant avec toutes leurs copies, sous quelque forme que ce soit. Vous reconnaissez avoir lu ce contrat, en avoir compris toute la substance et avoir accept de respecter ses termes, clauses et conditions. Vous reconnaissez en outre quils sont la description complte et exclusive du contrat conclu entre nous, contrat qui remplace et annule toute proposition ou contrat prcdent, crit ou oral, et toute autre communication entre nous, relativement lobjet du prsent contrat. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A 27 DFQW5645ZAT_CF-53mk2_7_OI_M.book 28 Specifications This page provides the specifications for the basic model. The model number is different according to the unit configu-
ration.
To check the model number:
Check the bottom of the computer or the box the computer came in at the time of purchase.
To check CPU speed, memory size and the hard disk drive (HDD) size:
Run the Setup Utility ( Reference Manual Setup Utility) and select [Information] menu.
[Processor Speed]: CPU speed, [Memory Size]: Memory size, [Hard Disk]: Hard disk drive size
Main Specifications Model No. CPU/Secondary cache memory Chip Set Video controller Main Memory*2 Video Memory Hard Disk Drive CD/DVD drive Continuous Data Transfer Speed*5*6 Supported Discs/
Format Reading*7 Writing*10 Reading Writing Display Method Internal LCD External Display*12 Wireless LAN*13 Bluetooth*14 Wireless WAN*15 GPS*16 d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A LAN Modem*18 Sound 28 CF-53JSLZYDM CF-53JALZYDM i5-3320M Processor (3 MB*1 cache, up to 3.3 GHz) with Intel Turbo Boost Technology Intel 7 Series Express Chipsets QM77 Built-in Chip Set 4 GB*1, DDR3L SDRAM (16 GB*1 Max.) UMA (<32-bit> 1419 MB*1 Max., <64-bit> 1696 MB*1 Max.)*3 500 GB*4 (Serial ATA) Approx. 10 GB*4 is used as a partition with recovery tools. (Users cannot use this partition.) DVD MULTI Drive built-in, Buffer underrun error prevention function: Supported, Zero Power ODD: Supported
DVD-RAM*8: 5X (Max.) DVD-R*9: 8X (Max.) DVD-R DL: 8X (Max.) DVD-RW: 8X (Max.)
DVD-ROM: 8X (Max.) +R DL: 8X (Max.) +RW: 8X (Max.) High Speed +RW: 8X (Max.)
CD-ROM: 24X (Max.) CD-R: 24X (Max.) CD-RW: 24X (Max.)
High-Speed CD-RW: 24X (Max.) Ultra-Speed CD-RW: 24X (Max.)
DVD-RAM*8: 5X (Max.) DVD-R*9: 8X (Max.) DVD-R DL: 6X (Max.) DVD-RW: 6X (Max.)
+R DL: 6X (Max.) +RW: 4X (Max.) High Speed +RW: 8X (Max.) CD-R: 24X (Max.)
CD-RW: 4X High-Speed CD-RW: 10X Ultra-Speed CD-RW: 24X (Max.)
DVD-ROM (Single Layer, Dual Layer) DVD-Video DVD-R*9 (1.4 GB, 3.95 GB, 4.7 GB)*4
DVD-R DL (8.5 GB)*4 DVD-RW (Ver.1.1/1.2 1.4 GB, 2.8 GB, 4.7 GB, 9.4 GB)*4 DVD-RAM*8
(1.4 GB, 2.6 GB, 2.8 GB, 4.7 GB, 5.2 GB, 9.4 GB)*4 +R (4.7 GB)*4 +R DL (8.5 GB)*4
+RW (4.7 GB)*4 High Speed +RW (4.7 GB)*4 CD-Audio CD-ROM (XA compatible) CD-R
Photo CD (multiple session compatible) Video CD CD-EXTRA CD-RW CD-TEXT
High-Speed CD-RW Ultra-Speed CD-RW
DVD-RAM*8 (1.4 GB, 2.8 GB, 4.7 GB, 9.4 GB)*4 DVD-R*9 (1.4 GB, 4.7 GB for General)*4
DVD-R DL (8.5 GB)*4 DVD-RW (Ver.1.1/1.2 1.4 GB, 2.8 GB, 4.7 GB, 9.4 GB)*4
+R (4.7 GB)*4 +R DL (8.5 GB)*4 +RW (4.7 GB)*4 High Speed +RW (4.7 GB)*4 CD-R
CD-RW High-Speed CD-RW Ultra-Speed CD-RW 14 type (TFT) (1366 768 dots) 14 type with Touchscreen (TFT) (1366 768 dots) 65,536 / 16,777,216 colors (800 600 dots / 1024 768 dots / 1280 600 dots / 1280 720 dots / 1280 768 dots / 1360 768 dots / 1366 768 dots)*11 65,536 / 16,777,216 colors (800 600 dots / 1024 768 dots / 1280 768 dots / 1600 1200 dots / 1920 1080 dots / 1920 1200 dots) Intel Centrino Advanced-N 6205 ( page 30)
page 30 Sierra Wireless High-speed module Chip: SiRF starIII Accuracy: 10 m (2DRMS, 5 m (2DRMS, SBAS) Protocol message: GGA, GSA, GSV, RMC, VTG IEEE 802.3 10Base-T / IEEE 802.3u 100BASE-TX / IEEE 802.3ab 1000BASE-T
(2nd LAN*17: IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX) Data: 56 kbps (V.92) FAX: 14.4 kbps WAVE and MIDI playback, Intel High Definition Audio subsystem support DFQW5645ZAT_CF-53mk2_7_OI_M.book 29
Main Specifications Model No. Security Chip Card Slots PC Card Slot ExpressCard Slot*22 SD Memory Card Slot*23 Contact Smart Card Slot*24 RAM Module Slot Interface Keyboard / Pointing Device Fingerprint Reader*30 RFID Reader*31 Camera*32 Power Supply AC Adaptor*33 Battery Pack Operating Time*34 Charging Time*35 Power Consumption*36 Physical Dimensions (W D H)
(including the carrying handle) Weight
(including the carrying handle) Envi-
Temperature ronment Oper-
ating Stor-
age Humidity Temperature Humidity
Software Installed OS*39 Pre-installed Software CF-53JSLZYDM CF-53JALZYDM TPM (TCG V1.2 compliant)*19 x 1*20 or 2*21, Type I or Type II, Allowable current 3.3 V: 400 mA, 5 V: 400 mA x 1, ExpressCard/34 or ExpressCard/54 x 1 x 1 87 keys / Touch Pad, Touchscreen x 2, DDR3L SDRAM, 204-pin, 1.35 V, SO-DIMM, PC3L-10600 Compliant USB Ports 4 (USB 2.0 2 + USB 3.0 2)*25/ Serial Port (Dsub 9-pin male) / Modem Port
(RJ-11)*18/ LAN Port (RJ-45) 1*26 or 2*17 / VGA Port (Mini Dsub 15-pin female) / HDMI Port
(Type A)*27 / IEEE1394a Interface Connector (4-pin)*28 / Microphone Jack (Miniature jack, 3.5 DIA) / Headphone Jack (Miniature jack, 3.5 DIA, Impedance 32 , Output Power 4 mW 2, Ste-
reo) / Expansion Bus Connector (Dedicated 100-pin female/ Rugged USB 2.0 Port*29) 87 keys / Touch Pad Array Size : 192 x 4 pixels, Image Size : 192 x 512 pixels, Image Resolution : 508 DPI RF frequency: 13.56 MHz, compatible with ISO14443 TYPE-A, ISO14443 TYPE-B, ISO15693 1280 1024 dots, 30 fps AC adaptor or Battery pack Input: 100 V - 240 V AC, 50 Hz/60 Hz, Output: 15.6 V DC, 7.05 A Li-ion 10.8 V, Typical 6750 mAh / Minimum 6300 mAh Approx. 11 hours Approx. 2 hours Approx. 30 W*37/ Approx. 100 W (maximum when recharging in the ON state) 340 mm 281 mm 46 - 55 mm {13.4" 11.1" 1.9" - 2.2"}
Approx. 2.65 kg {Approx. 5.84 lb.}
Approx. 2.95 kg {Approx. 6.50 lb.}
<Model without HDD heater> 0 C to 50 C {32 F to 122 F } (IEC60068-2-1, 2)*38
<Model with HDD heater> -10 C to 50 C {14 F to 122 F} (IEC60068-2-1, 2)*38 30% to 80% RH (No condensation)
-20 C to 60 C {-4 F to 140 F}
30% to 90% RH (No condensation) Genuine Windows 7 Professional 32-bit Service Pack 1 / Genuine Windows 7 Professional 64-bit Service Pack 1 Adobe Reader, PC Information Viewer, Intel PROSet/Wireless Software*13, Bluetooth Stack for Windows by TOSHIBA*14, Wireless Switch Utility, Wireless Connection Disable Utility*13 *15 *40, Hotkey Settings, Battery Recalibration Utility, Infineon TPM Professional Package*19 *40, Protector Suite 2011*30 *40, Aptio Setup Utility, PC-Diagnostic Utility, Roxio Creator LJB, CyberLink PowerDVD 10, Wireless WAN Connection Manager*15, Display Selector, Concealed Mode Utility, Wireless Manager Mobile Edition 5.5f*40 *41, Hard Disk Data Erase Utility*42, Recovery Disc Creation Utility, Dashboard for Panasonic PC, Quick Boot Manager, Power Plan Extension Utility, Camera Utility*32, GPS Viewer*16 d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A 29 DFQW5645ZAT_CF-53mk2_7_OI_M.book 30 Specifications
Wireless LAN *13 Data Transfer Rates IEEE802.11a IEEE802.11b IEEE802.11g IEEE802.11n*44
: 54/48/36/24/18/12/9/6 Mbps (automatically switched)*43
: 11/5.5/2/1 Mbps (automatically switched)*43
: 54/48/36/24/18/12/9/6 Mbps (automatically switched)*43
: (HT20)GI*45 = 400ns: 150/130/115/86/72/65/57/43/39/28/21/14/7 Mbps (auto-
matically switched)*43 GI*45 = 800ns: 130/117/104/78/65/58/52/39/26/19/13/6 Mbps*43
(HT40)GI*45 = 400ns: 300/270/240/180/150/135/120/90/60/45/30/15 Mbps
(automatically switched)*43 GI*45 = 800ns: 270/243/216/162/135/121/108/81/54/40/27/13 Mbps*43 Standards Supported Transmission Method Wireless Channels Used RF Frequency Band
Bluetooth *14 Bluetooth Version Transmission Method Wireless Channels Used RF Frequency Band IEEE802.11a / IEEE802.11b / IEEE802.11g / IEEE802.11n OFDM system, DS-SS system IEEE802.11a : Channels 36/40/44/48/52/56/60/64/100/104/108/112/116/132/136/140/149/
IEEE802.11b/IEEE802.11g : Channels 1 to 11 IEEE802.11n : Channels 1-11/36/40/44/48/52/56/60/64/100/104/108/112/116/132/136/140/149/
153/157/161/165 153/157/161/165 IEEE802.11a : 5.18 GHz - 5.32 GHz, 5.5 GHz - 5.7 GHz, 5.745 GHz - 5.825 GHz IEEE802.11b/IEEE802.11g : 2.412 GHz - 2.462 GHz IEEE802.11n : 2.412 GHz - 2.462 GHz, 5.18 GHz - 5.32 GHz, 5.5 GHz - 5.7 GHz, 5.745 GHz - 5.825 GHz Version 4.0 Classic model / Low Energy model FHSS system 79 channels / Channel 0 to 39 2.402 GHz - 2.480 GHz
*1 1 KB = 1,024 bytes /
1 MB = 1,048,576 bytes /
1 GB = 1,073,741,824 bytes
*2 Memory size of the factory default depends on the model. You can physically expand the memory up to 16 GB, but the total amount of usable memory available will be less depend-
ing on the actual system configuration.
*3 A segment of the main memory is allotted automatically depending on the computers operating status. The size of the Video Memory cannot be set by the user. The size of Video memory is allotted depending on the operating system.
*4 1 MB = 1,000,000 bytes / 1 GB = 1,000,000,000 bytes. Your operating system or some application software will report as fewer GB.
*5 Data transfer speeds indicate values measured by Pana-
sonic Corporation. The data transfer rate of DVD per 1X speed is 1,350 KB/s. The data transfer rate of CD per 1X speed is 150 KB/s.
*6 Performance of CD-R, CD-RW, DVD-RAM, DVD-R, DVD-R DL, DVD-RW, +R, +R DL, and +RW cannot be guaranteed depending on writing status and recording format. Also, some data cannot be played back depending on the disc, settings, and environment being used. Does not support writ-
ing to DVD-R DL/+R DL (dual layer discs) and Ultra-Speed CD-RW.
*7 If an unbalanced disc (e.g., a disc with which the balance has been displaced from the center) is inserted, the speed may become slower if there are large vibrations while the disc is rotating.
*8 Only non-cartridge type or removable cartridge type can be used.
*9 DVD-R is compatible with 4.7 GB (for General) playback. DVD-R (for Authoring) playback is compatible with discs recorded using Disc-at-Once recording.
*10 Depending on the disc, the writing speed may become slower. function. displays.
*11 A 16,777,216 color display is achieved by using the dithering
*12 Display may be impossible using some connected external
*13 Only for model with wireless LAN.
*14 Only for model with Bluetooth.
*15 Only for model with wireless WAN. The specification may dif-
fer depending on models.
*16 Only for model with GPS.
*17 Only for model with 2nd LAN.
*18 Only for model with modem.
*19 Only for model with TPM. For information on TPM, refer to the Installation Manual of Trusted Platform Module (TPM) by the following procedure. Click
[Search programs and files] and press Enter.
(Start) and input "c:\util\drivers\tpm\index.hta" in
*20 Only for model with 1 PC card slot.
*21 Only for model with 2 PC card slots.
*22 Only for model with ExpressCard slot.
*23 This slot is compatible with High-Speed Mode. Operation has been tested and confirmed using Panasonic SD/SDHC/
SDXC Memory Cards with a capacity of up to 64 GB. Opera-
tion on other SD equipment is not guaranteed.
*24 Only for model with Smart Card slot. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A 30 DFQW5645ZAT_CF-53mk2_7_OI_M.book 31
*25 Does not guarantee operation of all USB-compatible periph-
*38 Do not expose the skin to this product when using the prod-
*26 Only for model without 2nd LAN.
*27 Does not guarantee operation of all HDMI-compatible periph-
erals. erals.
*28 Only for model with IEEE 1394a interface.
*29 Only for model with rugged USB 2.0 port.
*30 Only for model with Fingerprint reader.
*31 Only for model with RFID reader.
*32 Only for model with Camera.
*33 <Only for North America>
The AC adaptor is compatible with power sources up to 240 V AC adaptor. This computer is supplied with a 125 V AC compatible AC cord. 20-M-2-1
*34 Measured with LCD brightness : 60 cd/m2 Varies depending on the usage conditions, or when an optional device is attached.
*35 Varies depending on the usage conditions, CPU speed, etc.
*36 Approx. 0.7 W when the battery pack is fully charged (or not being charged) and the computer is off.
<When using with 115 V AC>
Even when the AC adaptor is not connected to the computer, power is consumed (Max. 0.2 W) simply by having the AC adaptor plugged into an AC outlet.
*37 Rated power consumption. uct in a hot or cold environment. ( page 9) When using in hot or cold environment, some peripherals may fail to work properly. Check the operation environment of the peripherals. Using this product continuously in a hot environment will shorten the product life. Avoid use in these types of environ-
ments. When using in low temperature environment, startup may become slow or battery operation time may become short. The computer consumes power when the hard disk is warm-
ing up during startup. Therefore, if you are using battery power and the remaining power is low, the computer may not start up.
*39 Operations of this computer are not guaranteed except for the pre-installed OS and the OS which is installed by using the Recovery disc. Some parts of the software in the Recov-
ery disc may not be installed depending on a model.
*40 Must be installed before use.
*41 For information on Wireless Manager, refer to the Supple-
mentary Instructions for Wireless Manager mobile edition 5.5 by the following procedure. Click Instructions.pdf in [Search programs and files] and press Enter.
(Start) and input c:\util\wlprjct\Supplementary
*42 Perform on the recovery partition. (If this software can not be
*43 These are speeds specified in IEEE802.11a+b+g+n stan-
dards. Actual speeds may differ.
*44 Available when set to WPA-PSK, WPA2-PSK or none.
*45 Only available when HT40 enabled by the computer. 23-E-1 performed.) d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A 31 DFQW5645ZAT_CF-53mk2_7_OI_M.book 32 LIMITED WARRANTY For U.S.A. Panasonic System Communications Company of North America (PSCNA) Computer Products - Worldwide Warranties Section 1: Limited Warranty - Hardware PSCNA, referred hereafter as Panasonic will repair the products listed below with new or rebuilt parts, free of charge in a Global Panasonic designated service location for the period specified below from the date of original purchase in the event of a defect in materials or workmanship. These warranties are extended solely to the original purchaser. A purchase receipt or other proof of date of original purchase will be required before warranty performance is rendered. Laptop PC (CF-##) 3 Years Tablet PC (FZ-A#) 3 Years ltra-Mobile (CF-U#/CF-H# Series) 3 Years PDRC - LCD & Keyboard Assembly 3 Years Battery Warranty Batteries supplied with the product are covered under the warranty for one (1) year from date of purchase, except as excluded in Section 3. Batteries purchased separately are covered under the warranty for one (1) year from the date of purchase. A replacement battery furnished under the product warranty is covered for the remaining period of the one year warranty on the original or pur-
chased battery. Optional: Panasonic Protection Plus Warranty Any unit for which the Panasonic Protection Plus warranty has been purchased will receive additional coverage for any failure that occurs due to accidental damage. All other terms and conditions of the standard warranty apply and this additional coverage will exist for the duration of the standard warranty period of the unit. If an extended Protection Plus warranty program is purchased, coverage is extended to the end of the last year of extended coverage purchased. This warranty does not cover failures or defects that are caused by fire, intentional acts, loss, theft, improper maintenance, modifica-
tion or service by anyone other than the Panasonic National Service Center or a Panasonic Authorized Service Provider, or damage that is attributable to acts of God. Cosmetic damage that does not affect functionality is not covered. Cosmetic damage on units with hardware failures will be repaired in accordance with the warranty terms. This warranty is extended solely to the original purchaser on the unit serial number for which it was purchased. Complete unit replacement fulfills the full obligation and is at the discretion of Panasonic and is limited to once during the coverage term. Maximum benefit is limited to one replacement per coverage year of the Motherboard, LCD, Storage Drive, and Keyboard. Wireless Module Warranty Panasonic approved wireless modems installed in Panasonic brand computers and integrated by Panasonic or an Authorized Pana-
sonic Wireless Integrator are covered under the warranty for the remaining warranty period of the device in which the modem is installed. For devices with less than three (3) months remaining on the unit warranty, the wireless modem will be covered for a period of three (3) months from the date of installation of the modem, covering only modem replacement or modem installation related issues. All modems must be approved by the wireless carrier prior to use. Any use or attempted use of a wireless modem not approved and activated by the carrier for use on their network is strictly prohibited and is not sanctioned or warranted by Panasonic and may result in legal action. In addition, all modems must be approved by Panasonic as compatible with the device hardware before installation or use. Panasonics sole responsibility for the warranty or technical support of the software required to install or operate the modem is defined in Section 2 (Limited Software Warranty). Any attempted software installation by anyone other than a Panasonic Authorized Wireless Integrator is not covered under warranty and may result in service charges to re-image or replace the hard drive. Installation or attempted installation by any party other than Panasonic or an Authorized Panasonic Wireless Integrator is strictly not covered under the warranty and may void the computer warranty if damage results. Options and Accessories Warranties The below listed Panasonic brand or supplied options and accessories are covered under this limited warranty for the period speci-
fied from the date of purchase or as specifically stated:
AC Adaptor / Power Cord 3 Years Memory Expansion Card (Panasonic Brand) 3 Years Car Mount - Docking Station PCB or Vehicle Docking Station 3 Years Desktop Port Replicator, I-O Box, Docking Cradle (like CF-U1) 3 Years Antenna Pass-through Cable 3 Years Backlit or Full-sized keyboard - 3 Years or assumes warranty of the unit in which it is installed Integrated Panasonic supplied options and kits including, but not limited to Wireless Modems, Media Bay Drives (Floppy, CD, DVD, Combo), Camera, GPS, Bluetooth, Smartcard Reader, Magnetic Card Reader, Barcode Scanner, and Fingerprint Reader
- 3 Years or assumes warranty period of the unit in which it is installed provided the integration was performed by Panasonic or an Authorized Integrator. Hard Drive / Solid State Drive (Internal) - 3 Years Separately purchased 2nd Hard Drive 1 Year External USB Drives (CD / DVD / Floppy / Hard Drive) 1 Year Optional Battery 1 Year Battery Charger / Multi-Bay Battery Charger 1 Year Stylus Pens, Digitizer & Standard - 90 Days (physical damage excluded) d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A 32 DFQW5645ZAT_CF-53mk2_7_OI_M.book 33 Section 2 - Limited Warranty - Software Panasonic warrants to you only that the disk(s) or other media on which the Programs are furnished will be free from defects in mate-
rial and workmanship under normal use for a period of sixty (60) days from the date of delivery thereof to you, as evidenced by your purchase receipt. This is the only warranty Panasonic makes to you. Panasonic does not warrant that the functions contained in the Programs will meet your requirements or that the operation of the Programs will be uninterrupted or error free. Panasonic shall have no obligation for any defects in the disk(s) or other media on which the Programs are furnished resulting from your storage thereof, or for defects that have been caused by operation of the disk(s) or other media Panasonics entire liability and your exclusive remedy under this warranty shall be limited to the replacement, in the United States or other Panasonic designated location, of any defective disk or other media which is returned to Panasonics Authorized Service Cen-
ter, together with a copy of the purchase receipt, within the aforesaid warranty period. Section 3 - Limited Warranty Exclusions - Specifically excluded from the warranty are:
All consumable items; such as screen protection films, logo badges, labels, cleaning cloths, carry cases, manuals, cables, straps, belts, holsters, tethers, and harnesses and any other options and accessories not listed above or covered under a sep-
arate warranty. Failures related to the product operating system, hard drive or solid state drive image, software setup, software program, virus, other program(s) or file(s) on any drive or in any computer memory location. Failures due to BIOS settings or changes, as well as any cosmetic or physical damage to the unit. Any unit or device with a missing or altered model number or serial number label Cosmetic damage or any damage which occurs in shipment Failures which are caused by products not supplied by Panasonic Failures which result from alteration, accident, misuse, introduction of liquid or other foreign matter into the unit, abuse, neglect, installation, maladjustment of consumer controls, improper maintenance or modification, use not in accordance with product use instructions Failures due to service by anyone other than a Panasonic Authorized Service Provider Failures caused by improper installation of options or accessories or due to integration by any company other than Panasonic or a Panasonic Authorized Integrator Damage, failure, or loss due to the unit being stolen, lost, misplaced, or used by anyone other than the original purchaser Damage that is attributable to acts of God This limited warranty only covers failures due to defects in materials or workmanship which occur during normal use. If a unit is sent to a Panasonic Authorized Service Center and no hardware failure is found, the customer will be billed for labor to correct a software issue or reimage the hard drive plus shipping and applicable administrative fees at the current rates set by the service provider. THIS PRODUCT IS NOT INTENDED FOR USE AS OR PART OF NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAFFIC CONTROL EQUIPMENT/SYSTEMS, OR AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS*1. PANASONIC WILL NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING FROM THE USE OF THIS PRODUCT ARISING OUT OF THE FOREGOING USES.
*1 AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include class 2 Electronic Flight Bag (EFB) Systems and Class 1 EFB Systems when used during critical phases of flight (e.g., during take-off and landing) and/or mounted onto the aircraft. Class 1 EFB Sys-
tems and 2 EFB Systems are defined by FAA: AC (Advisory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leaflets) No. 36. Other Limits and Exclusions: There are no other express warranties except as listed above. PANASONIC SHALL NOT BE LIABLE FOR LOSS OF DATA OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow the exclu-
sion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. For technical support or to arrange for service on your Panasonic computer product, call our toll-free hotline at 1-855-PSC-TECH
(855-772-8324). DIAL TOLL FREE: 1-855-PSC-TECH (1-855-772-8324) Web Site : www.panasonic.com/toughbook d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A 33 DFQW5645ZAT_CF-53mk2_7_OI_M.book 34 LIMITED WARRANTY For Canada PANASONIC COMPUTER AND PERIPHERALS LIMITED WARRANTY Coverage Panasonic Canada Inc. (PCI) warrants to you, the first end user customer, this computer product (excluding software media), when purchased from PCI or from a PCI authorized reseller, to be free from defects in materials and workmanship under normal use, subject to the terms set forth below, during the period of warranty coverage specified. Scope of Coverage Laptop Computers (except Battery) and AC Adaptor Factory/PCI installed options including Wireless WAN, GPS, Type of Failure Coverage Defective Materials or Work-
manship Period of Coverage Three (3) Years from Date of Original End User Customer Purchase Bluetooth, Finger print reader, Backlit keyboard, Memory Card and Media Bay Drives (Floppy, CD/DVD) Ultra-Mobile PC (CF-U1/CF-H1) Mobile Wireless Display PDRC LCD and Keyboard Assemblies Port Replicator Hand-held Computers Battery Battery charger Auto Adaptor External USB Drives Standard or Digitizer Stylus Pen One (1) Year from Date of Original End User Customer Purchase Defective Materials or Work-
manship Ninety (90) Days from Date of Original End User Customer Purchase No Coverage Defective Materials or Work-
manship All consumable items including protection film, cleaning cloth, carry case, tether and harness Remedy In the event of a warranty claim, contact PCIs representatives within the applicable warranty period, identifying the nature of the defect claimed, at 1-800-668-8386 between 9:00 A.M. and 5:00 P.M., Eastern Time Zone, Mon. Fri. (excluding holidays) for instructions on how to obtain service. A purchase receipt or other proof of date of original purchase is required before warranty ser-
vice is performed. Defective parts covered by this Limited Warranty will be repaired or replaced with new or comparable rebuilt parts on an exchange basis. Warranty replacement or repair is subject to the terms of this Limited Warranty for the balance of the original period of warranty coverage. No Coverage This Limited Warranty does not cover products purchased outside Canada. Neither does it cover damage to, failure of, or defects in a product or accessory through mishandling, improper installation, abnormal use, misuse, neglect, accident, intro-
duction of liquid or other foreign matter into the product, alteration or servicing by anyone not authorized by PCI, or act of God. THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS PART OF, NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAFFIC CON-
TROL EQUIPMENT/SYSTEMS, OR AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS*2. PANASONIC WILL NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING FROM THE USE OF THIS PRODUCT ARISING OUT OF THE FOREGOING USES.
*2 AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2 Electrical Flight Bag (EFB) Systems and Class1 EFB Systems when used during critical phases of flight (e.g., during take-off and landing) and/or mounted on to the aircraft. Class1 EFB Systems and 2 EFB Systems are defined by FAA: AC (Advisory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leaflets) No.36 Carefully pack the product, preferably in the original carton. Include details of defect claimed and proof of date of original purchase. No liability is assumed for loss or damage to the product while in transit, if you chose your own transportation carrier. IF YOU SHIP THE PRODUCT FOR WARRANTY SERVICE SOFTWARE MEDIA LIMITED WARRANTY Coverage PCI warrants to you, the first end user customer, that the disk(s) or other media on which software program(s) is/are supplied will be free from defects in materials and workmanship under normal use in Canada for a period of sixty (60) days from date of receipt as evidenced by your purchase receipt for your Panasonic Computer product. THIS IS THE ONLY WARRANTY THAT PCI MAKES RESPECTING THE SOFTWARE MEDIA. PCI does not warrant the software. Please refer to the software licensors written warranty (accompanying the copy of the software) for any software warranty claim. Claim Procedure In the event of a defect in material or workmanship in the media during the sixty (60) days warranty period, and you return it, transportation costs prepaid, to Panasonic Canada Inc., Computer Products Marketing, 5770 Ambler Drive, Missis-
sauga, Ontario L4W 2T3, within the warranty period, together with a copy of your purchase receipt, and an explanation of the sus-
pected defect, PCI will replace in Canada the defective disk(s) or other media. Remedy PCIs entire liability, and your only remedy for any breach of this software media warranty is limited to replacement of the media only. It does not cover any other damages, including, but not limited to, loss of use or profit loss, or special, indirect or conse-
quential damages, or other claims, whether or not of similar character. No Coverage This limited warranty does not apply if the disk(s) or other media has been used in other than a Panasonic product, or in environmental conditions other than those specified by PCI or the manufacturer, or if subjected to misuse, neglect, mishandling, modification or attempted modification of the program, or if damaged by accident or act of God. PCI is not responsible for damage to or loss of any program, data or removable storage media. GENERAL NO OTHER WARRANTIES PCI DISCLAIMS ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE, SOFTWARE MEDIA, COMPUTER PRODUCT, OPTIONS AND ACCESSORIES. NO LIABILITY FOR CONSEQUENTIAL DAMAGES IN NO EVENT SHALL PCI BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING FROM ANY BREACH OF THE LIMITED WARRANTIES SET OUT IN THIS DOCUMENT, OR FROM THE USE OF THE COMPUTER PRODUCT, INCLUDING, WITHOUT LIMITATION, LOSS OF DATA, BUSINESS, PROFIT OR GOODWILL. IN ANY EVENT, PCIS MAXIMUM LIABILITY FOR ANY BREACH SHALL NOT EXCEED THE AMOUNT ACTUALLY PAID BY YOU FOR THE COMPUTER PRODUCT. NO ACTION, REGARDLESS OF ITS BASIS, MAY BE BEGUN AGAINST PCI MORE THAN TWO (2) YEARS AFTER THE CAUSE OF ACTION AROSE. Statutory Warranties Some jurisdictions do not allow these limitations or exclusions, so they may not apply to you. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A 34 DFQW5645ZAT_CF-53mk2_7_OI_M.book 35 LIMITED WARRANTY (GARANTIE LIMITE) Pour le Canada GARANTIE LIMITE ORDINATEURS ET PRIPHRIQUES PANASONIC Couverture Panasonic Canada Inc. ( PCI ) garantit lacheteur original que ce produit informatique ( lexclusion des supports des logiciels) est, au moment de sa vente par PCI ou dun revendeur agr par PCI, exempt de dfauts de pices et de fabrication dans les con-
ditions normales dutilisation, et ce, pendant la priode de couverture de la garantie, sous rserve des modalits dcrites ci-dessous. lments couverts Ordinateurs blocs-notes (sauf batteries) et adaptateur secteur Options installes en usine/par PCI incluant : WAN sans fil, GPS, Bluetooth, lecteur dempreintes digitales, clavier rtro-
clair, carte mmoire et lecteurs (disquettes, CD/DVD) Ordinateurs personnels ultra-portables (CF-U1/CF-H1) cran mobile sans fil Ensembles PDRC ACL et clavier Duplicateur de port Ordinateurs de poche Batterie Chargeur de batterie Adaptateur pour voiture Priphriques USB Stylo pointeur standard ou pour numriseur graphique Type de couverture Dfauts de pices et de fabrica-
tion Dure de couverture Trois (3) ans partir de la date dachat original. Dfauts de pices et de fabrica-
tion Un (1) an partir de la date dachat original. Dfauts de pices et de fabrica-
tion Quatre-vingt-dix (90) jours partir de la date dachat original. Aucune couverture Tous les articles consommables incluant les pellicules protectrices, chiffons de nettoyage, tuis de transport, longes et sangles Recours Pour obtenir des informations sur la marche suivre dans le cas o une rclamation en vertu de la garantie deviendrait nces-
saire, communiquez par tlphone avec un reprsentant de PCI au 1-800-668-8386, entre 9h00 et 17h00 (heure de lEst) du lundi au ven-
dredi (sauf les jours fris), avant lchance de la garantie applicable, en prenant soin didentifier la nature de la dfaillance. Un reu ou toute autre pice justificative de la date dachat original sera exig avant toute rparation. Toute pice dfectueuse couverte par la prsente garantie limite sera rpare ou remplace par une pice neuve ou remise neuf. Le remplacement ou la rparation sera fait conform-
ment aux modalits de la prsente garantie limite pendant la dure restante de la priode originale de la garantie. Produits non couverts La prsente garantie limite ne couvre pas les produits achets lextrieur du Canada. Elle ne couvre pas non plus les dommages, la dfaillance ou les dfauts attribuables une manutention inadquate, une mauvaise installation, une utilisation anormale ou abusive, de la ngligence, un accident, un dversement ou la pntration dun objet tranger, une modifica-
tion, un cas fortuit ou une rparation effectue par une personne non agre par PCI. CE PRODUIT NEST PAS DESTIN TRE UTILIS, EN TOUT OU EN PARTIE, COMME SYSTME/QUIPEMENT NUCLAIRE, SYSTME/
QUIPEMENT DE CONTRLE DU TRAFFIC ARIEN OU SYSTME/QUIPEMENT DE POSTE DE PILOTAGE DAVION*3. PANASONIC DCLINE TOUTE RESPONSABILIT CONCERNANT LUTILISATION DE CE PRODUIT DANS LES CAS SUSMENTIONNS.
*3 Les SYSTMES/QUIPEMENTS DE POSTE DE PILOTAGE DAVION sont dots de systmes OEPP (organiseur lectronique de poste de pilotage) de classe 2 et de classe 1 utiliss pendant des phases critiques de vol (par exemple, pendant le dcollage et latterrissage) et(ou) monts sur lavion. Les systmes OEPP de classe 1 et de classe 2 sont dfinis par le circulaire dinforma-
tion FAA: AC (Advisory Circular) 120-76A ou le feuilet n 36 JAA: JAA TGL (Temporary Guidance Leaflets) No 36. Emballez soigneusement le produit, de prfrence dans son emballage dorigine. Joignez une description de la dfaillance de mme quune pice justificative de la date dachat. Panasonic Canada Inc. ne peut tre tenue responsable pour tout dommage ou perte subi pendant le transport si vous avez choisi le transporteur. EXPDITION DU PRODUIT POUR SERVICE SOUS GARANTIE GARANTIE LIMITE SUPPORTS DES LOGICIELS Couverture Panasonic Canada Inc. ( PCI ) garantit lacheteur original que la ou les disquettes ou tout autre support sur lequel le ou les programmes sont fournis sont exempts de dfauts de pices et de fabrication dans des conditions normales dutilisation au Canada, et ce, pour une priode de soixante (60) jours suiv-
ant la date de rception indique sur la preuve dachat. LA PRSENTE GARANTIE EST LA SEULE OFFERTE PAR PCI COUVRANT LES SUPPORTS DE LOGICIELS. PCI ne garantit pas les logiciels. Reportez-vous la garantie crite du concdant de licence dutilisation du logiciel (qui accompagne la copie du logiciel) pour toute rclamation en vertu de la garantie. Rclamation marche suivre Panasonic Canada Inc. remplacera toute disquette ou support dfectueux si larticle en question est retourn, port pay, son service de Marketing produits informatiques, 5770 Ambler Drive, Mississauga (Ontario) L4W 2T3, dans les soixante
(60) jours suivant la date dachat original. Joignez votre envoi une pice justificative de votre achat et une description du problme. Recours La responsabilit de PCI - et votre seul recours - dans le cas de toute dfaillance couverte par la garantie sur ce support de logiciel est limite au seul remplacement du support. Elle ne couvre aucun autre dommage, y compris, mais non exclusivement, la perte dusage ou de profits, ni aucun dommage spcial, indirect ou conscutif, ni aucune autre rclamation de nature similaire ou autre. Produits non couverts La prsente garantie limite ne sapplique pas si la ou les disquettes ou autre support ont t utiliss dans un produit dune marque autre que Panasonic ou dans des conditions environnementales autres que celles spcifies par PCI ou le fabricant, ou soumis une mauvaise utilisation, la ngligence, une manutention inadquate ou encore si le programme a t modifi ou subi une tentative de modification ou des dommages attribuables un accident ou un cas fortuit. De plus, PCI nassume aucune responsabilit pour toute perte de, ou tout dommage , un programme, des donnes ou un support de sauvegarde amovible. GNRALITS PCI NE RECONNAT AUCUNE AUTRE GARANTIE, EXPLICITE OU IMPLICITE, Y COMPRIS, MAIS NON EXCLUSIVEMENT, LES GARANTIES IMPLIC-
ITES DE VALEUR COMMERCIALE ET DUTILIT UNE FIN QUELCONQUE, LGARD DU LOGICIEL, SUPPORTS DE LOGICIELS, PRODUITS INFORMATIQUES, PRIPHRIQUES ET ACCESSOIRES. SOUS AUCUNE CIRCONSTANCE PCI NE POURRA TRE TENUE RESPONSABLE DES DOMMAGES SPCIAUX, INDIRECTS OU CONSCUTIFS ATTRIBUABLES UN MANQUEMENT AUX GARANTIES LIMITES DCRITES DANS LE PRSENT DOCUMENT OU LUTILISATION DU PRODUIT INFORMATIQUE, Y COMPRIS, SANS RESTRICTION, LA PERTE DE DONNES, DAFFAIRES, DACHALANDAGE OU DE PROFIT. DANS TOUS LES CAS, LA RESPONSABILIT MAXIMALE DE PCI POUR TOUT MANQUEMENT NE POURRA EXCDER LE PRIX DE VENTE DU PRODUIT INFORMATIQUE. AUCUNE RCLAMATION, SANS GARD SES MOTIFS, NE POURRA TRE FAITE AUPRS DE PCI PLUS DE DEUX (2) ANS APRS LES FAITS INVOQUS LA BASE DUNE TELLE RCLAMATION. Garantie statutaires Certaines juridictions interdisent de telles limitations ou exclusions; aussi, pourraient-elles ne pas sappliquer. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A 35 06_Appendix.fm 36 LIMITED WARRANTY For Australia Personal / Notebook Computers - 36 Month Warranty from Date of Purchase 1. Subject to the conditions of this warranty Panasonic or its Authorised Service Centre will perform necessary service on the prod-
uct without charge for parts or labour, if in the opinion of Panasonic, the product is found to be faulty within the warranty period. 2. This warranty only applies to Panasonic products purchased in Australia and sold by Panasonic Australia or its Authorised Dis-
tributors or Dealers and only where the products are used and serviced within Australia or its territories. Warranty cover only applies to service carried out by a Panasonic Authorised Service Centre and only if valid proof of purchase is presented when warranty service is requested. 3. This warranty only applies if the product has been installed and used in accordance with the manufacturers recommendations
(as noted in the operating instructions) under normal use and reasonable care (in the opinion of Panasonic). The warranty covers normal domestic use only and does not cover damage, malfunction or failure resulting from use of incorrect voltages, incorrect installation, accident, misuse, neglect, build-up of dirt or dust, abuse, maladjustment of customer controls, mains supply prob-
lems, thunderstorm activity, infestation by insects or vermin, tampering or repair by unauthorised persons (including unauthorised alterations), exposure to abnormally corrosive conditions or any foreign object or matter having entered the product. 4. This warranty does not cover the following items unless the fault or defect existed at the time of purchase: Software 5. Warranty on Toughbook accessories (stylus, pens, AC charger, combo drive, etc) is 12 Months from the date of purchase & 3 months for batteries. 6. To claim warranty service, when required, you should:
Check the Panasonic web site for latest warranty contact http://www.panasonic.com.au/toughbook, use the Service Centre Locator and call the National Service Centre number indicated. Prepare purchase receipt as proof of purchase date and system serial number which will be required by the Authorised Service Centre. 7. The Warranty excludes 3 or less faulty pixels on screen. 8. The Warranty includes the repair or exchange of faulty parts within the product with items that are functionally equivalent to that as originally supplied or better including new or refurbished parts or units solely at Panasonics discretion. It is the customers responsibility to backup all data from the hard disk drive before sending equipment for repair. If a problem is related to the hard disk drive, or the hard disk drive has to be replaced, Panasonic will only reload the factory pre-installed soft-
ware for the product onto the replacement drive. 9. 10. Panasonic will arrange free pick up and return for approved warranty repairs within 50km of capital city locations. Please ensure your unit is properly packed for return to the service location. 11. The warranties hereby conferred do not extend to, and exclude, any costs associated with the installation, de-installation or re-installation of a product, including costs related to the mounting, demounting or remounting of any screen, (and any other ancillary activities), delivery, handling, freighting, transportation or insurance of the product or any part thereof or replacement of and do not extend to, and exclude, any damage or loss occurring by reason of, during, associated with, or related to such installation, de-installation, re-installation or transit. In addition to your rights under this warranty, Panasonic products come with consumer guarantees that cannot be excluded under the Aus-
tralian Consumer Law. If there is a major failure with the product, you can reject the product and elect to have a refund or to have the product replaced or if you wish you may elect to keep the goods and be compensated for the drop in value of the goods. You are also entitled to have the product repaired or replaced if the product fails to be of acceptable quality and the failure does not amount to a major failure. If there is a major failure in regard to the product which cannot be remedied then you must notify us within a reasonable period by contacting the Panasonic Customer Care Centre. If the failure in the product is not a major failure then Panasonic may choose to repair or replace the product and will do so in a reasonable period of time from receiving notice from you. THIS PRODUCT IS NOT INTENDED FOR USE AS OR AS PART OF NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAFFIC CON-
TROL EQUIPMENT/SYSTEMS, OR AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS*4. PANASONIC WILL NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING FROM THE USE OF THIS PRODUCT ARISING OUT OF THE FOREGOING USES.
*4 AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class 2 Electronic Flight Bag (EFB) Systems and Class 1 EFB Systems when used during critical phases of flight (e.g., during take-off and landing) and/or mounted onto the aircraft. Class 1 EFB Systems and 2 EFB Systems are defined by FAA: AC (Advisory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leaflets) No.36. THIS WARRANTY CARD AND THE PURCHASE DOCKET (OR SIMILAR PROOF OF PURCHASE) SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l i x d n e p p A If you require assistance regarding warranty conditions or any other enquiries, please visit the Panasonic Australia website www.panasonic.com.au/toughbook or contact by phone on 1300 132 463 Panasonic Australia Pty. Limited ACN 001 592 187 ABN 83 001 592 187 1 Innovation Road, Macquarie Park NSW 2113 www.panasonic.com.au 11-11-2011 PRO-031-F05 Issue: 4.0 36 DFQW5645ZAT_CF-53mk2_7_OI_M.book 37 MEMO 37 DFQW5645ZAT_CF-53mk2_7_OI_M.book 38 MEMO 38 DFQW5645ZAT_CF-53mk2_7_OI_M.book 39 39 DFQW5645ZAT_CF-53mk2_7_OI_M.book 40 As an ENERGY STAR Partner, Panasonic Corporation has determined that this product meets ENERGY STAR guidelines for energy efficiency. By enabling available power management settings, Panasonic computers enter a low-power sleep mode after a period of inactivity, saving the user energy.
<Only for U.S.A.>
To learn more about power management, please visit the web site:
www.energystar.gov/index.cfm?c=power_mgt.pr_power_management Outline of the International ENERGY STAR Office Equipment Program The international ENERGY STAR Office Equipment Program is an international program that promotes energy saving through the use of computers and other office equipment. The program backs the development and dissem-
ination of products with functions that effectively reduce energy consumption. It is an open system in which busi-
ness proprietors can participate voluntarily. The targeted products are office equipment such as computers, displays, printers, facsimiles, and copiers. Their standards and logos are uniform among participating nations.
<Only for U.S.A.>
For information about ENERGY STAR, refer to the following web site:
http://www.energystar.gov 22-E-1 Panasonic System Communications Company of North America 3 Panasonic Way, Panazip 2F-5, Secaucus, NJ 07094 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 Panasonic Corporation 2012 Printed in Taiwan TA0512-0 DFQW5645ZAT
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2012-06-21 | 2422 ~ 2452 | DTS - Digital Transmission System | Class II permissive change or modification of presently authorized equipment |
2 | 2012-06-11 | JBP - Part 15 Class B Computing Device Peripheral | Change in identification of presently authorized equipment. Original FCC ID: PPD-AR5B125 Grant Date: 03/08/2011 | |
3 | 2422 ~ 2452 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2012-06-21
|
||||
1 2 3 |
2012-06-11
|
|||||
1 2 3 | Applicant's complete, legal business name |
Panasonic Corporation of North America
|
||||
1 2 3 | FCC Registration Number (FRN) |
0003762242
|
||||
1 2 3 | Physical Address |
Two Riverfront Plaza, 9th Floor
|
||||
1 2 3 |
Newark, New Jersey 07102-5490
|
|||||
1 2 3 |
United States
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
c******@ccsemc.com
|
||||
1 2 3 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 3 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
ACJ
|
||||
1 2 3 | Equipment Product Code |
9TGWL12B
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
B******** B******
|
||||
1 2 3 | Title |
Project Manager
|
||||
1 2 3 | Telephone Number |
201-3********
|
||||
1 2 3 | Fax Number |
201-3********
|
||||
1 2 3 |
B******@us.panasonic.com
|
|||||
app s | Technical Contact | |||||
1 2 3 | Firm Name |
Compliance Certification Services
|
||||
1 2 3 | Name |
T****** C******
|
||||
1 2 3 | Physical Address |
47173 Benicia Street
|
||||
1 2 3 |
Fremont, California 94538
|
|||||
1 2 3 |
United States
|
|||||
1 2 3 | Telephone Number |
510-7********
|
||||
1 2 3 | Fax Number |
510-6********
|
||||
1 2 3 |
T******@CCSEMC.COM
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 3 | JBP - Part 15 Class B Computing Device Peripheral | |||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 1x1 802.11 b/g/n PCle Module | ||||
1 2 3 | 1X1 802.11b/g/n PCIe Module | |||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Limited Single Modular Approval | ||||
1 2 3 | Single Modular Approval | |||||
1 2 3 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
1 2 3 | Change in identification of presently authorized equipment. Original FCC ID: PPD-AR5B125 Grant Date: 03/08/2011 | |||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 2 3 | Yes | |||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | Class II Permissive Change to add specific mobile host configuration subject to professional installation as described in the filing. Power listed is conducted. Original evaluation performed to establish the most conservative antenna-to-user separation distance of 2.0 cm for portable module installed in Laptop/Notebook/Netbook and Tablet Computers. The antenna(s) used for this device must be installed to provide a separation distance of at least 2.0 cm from all persons. Compliance of this device in all final product configurations is the responsibility of the Grantee. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. For mobile configuration, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This module may be installed only by the OEM or an OEM integrator. Only antenna(s) documented under this FCC ID number may be used with this transmitter. When all conditions of this filing cannot be met, installation of this device into specific final products may require the submission of a permissive change or new application, where appropriate, containing data demonstrating compliance for SAR, spurious emissions, and host / module authentication. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each individual transmitter they choose to incorporate into a host product. The highest measured body SAR value @ 2.0 cm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computers platform is: 0.377 W/kg. | ||||
1 2 3 | Power listed is conducted. Evaluation performed to establish the most conservative antenna-to-user separation distance of 2.0 cm for portable module installed in Laptop/Notebook/Netbook and Tablet Computers. The antenna(s) used for this device must be installed to provide a separation distance of at least 2.0 cm from all persons. Compliance of this device in all final product configurations is the responsibility of the Grantee. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. For mobile configuration, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This module may be installed only by the OEM or an OEM integrator. Only antenna(s) documented under this FCC ID number may be used with this transmitter. When all conditions of this filing cannot be met, installation of this device into specific final products may require the submission of a permissive change or new application, where appropriate, containing data demonstrating compliance for SAR, spurious emissions, and host / module authentication. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each individual transmitter they choose to incorporate into a host product. The highest measured body SAR value @ 2.0 cm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computers platform is: 0.377 W/kg. | |||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
UL Japan, Inc. Head office EMC Lab.
|
||||
1 2 3 |
Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
|
|||||
1 2 3 | Name |
T****** H********
|
||||
1 2 3 |
K****** L****
|
|||||
1 2 3 | Telephone Number |
+81-5********
|
||||
1 2 3 |
+886-******** Extension:
|
|||||
1 2 3 | Fax Number |
+81-5********
|
||||
1 2 3 |
+886-********
|
|||||
1 2 3 |
T******@jp.ul.com
|
|||||
1 2 3 |
k******@tw.bureauveritas.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2412 | 2462 | 0.269 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15C | CC | 2422 | 2452 | 0.174 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15B | CC | ||||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC | 2412 | 2462 | 0.269 | |||||||||||||||||||||||||||||||||||
3 | 2 | 15C | CC | 2422 | 2452 | 0.174 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC