all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 2.14 MiB | / March 02 2008 | |||
1 | Cover Letter(s) | |||||||
1 | External Photos | / March 02 2008 | ||||||
1 | ID Label/Location Info | |||||||
1 | Internal Photos | / March 02 2008 | ||||||
1 | Test Report | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos | / March 02 2008 |
1 | User Manual | Users Manual | 2.14 MiB | / March 02 2008 |
Audio menu The functions in the Audio menu operate the audio equipment which you currently have turned on. If no audio equipment is currently turned on, the message Audio Off appears in the multifunction display. The following functions are available:
Function Selecting radio station Selecting satellite radio station*
(USA only) Operating CD player*
Page 155 155 156 To adjust the volume: Press or on the multifunction steering wheel. Selecting radio station Turn on the radio ( page 184) and se-
lect Radio. Vehicles with COMAND*:
Refer to separate operating instruc-
tions. Press ( or & to select the Audio menu. The currently tuned sta-
tion appears in the multifunction dis-
play. 1 Waveband setting 2 Station frequency Select next or previous stored sta-
tion: Press % or $ briefly to se-
lect a stored station. Select next or previous station in waveband: Press and hold % or
$ to select a station. Controls in detail Control system i You can only store new stations using the corresponding feature on the radio
( page 195). Vehicles with COMAND*:
Refer to separate operating instructions. You can also operate the radio in the usual manner. Selecting satellite radio station*
The satellite radio is treated as a radio application. Turn on the radio ( page 184) and se-
lect the satellite radio with the audio control unit or the audio controller. Vehicles with COMAND*: Refer to separate operating instructions. Press ( or & to select the Audio menu. The currently tuned channel appears in the multifunction display. 155 Controls in detail Control system Operating the CD player*
Turn on the radio and select the CD mode ( page 210). Vehicles with COMAND*:
Refer to separate operating instructions. 1 SAT mode 2 Channel name or number Press % or $ repeatedly until the desired channel is found. Press ( or & to select the Audio menu. The settings for the cur-
rently being played CD appear in the multifunction display. i To select a CD from the CD changer* maga-
zine, press a number on the audio system or the COMAND* system key pad located in the center console. For more information on CD operation, see CD mode ( page 205) and for the CD changer*, see ( page 211). i A subscription to SIRIUS satellite radio ser-
vice provider is required for the satellite radio op-
eration. Contact an authorized Mercedes-Benz Center for details and availability for your vehicle. For more information on satellite radio opera-
tion, see Satellite radio* ( page 197). Vehicles with COMAND*:
Refer to separate operating instructions. 156 1 Current CD (with additional number from 1 to 6 when running from CD changer*) 2 Current track Press % or $ to select a track. 1 MP3 mode 2 Current track i Level of information displayed will vary de-
pending on the information contained on the CD with MP3 files insert in the audio or COMAND*
system. For more information on MP3, see Notes about MP3 mode ( page 208). Controls in detail Control system TEL menu*
You can use the functions in the Tel menu to operate your telephone, provided it is inserted in the cradle and switched on. Warning!
G Some jurisdictions prohibit the driver from using a cellular telephone while driving. Whether or not prohibited by law, for safety reasons, the driver should not use the cellu-
lar telephone while the vehicle is in motion. Stop the vehicle in a safe location before placing or answering a call. If you nonetheless choose to use the mobile phone while driving, please use the hands-
free feature and be sure to pay attention to the traffic situation at all times. Use the mo-
bile phone only when road, weather and traf-
fic conditions permit. Otherwise, you may not be able to observe traffic conditions and could endanger your-
self and others. Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is covering a distance of 44 feet
(approximately 14 m) every second. Warning!
G Never operate radio transmitters equipped with a built-in or attached antenna (i.e. with-
out being connected to an external antenna) from inside the vehicle while the engine is running. Doing so could lead to a malfunc-
tion of the vehicles electronic system, possibly resulting in an accident and personal injury. i Various mobile phone cradles can be in-
stalled in the front center armrest, see separate installation instructions for the mobile phone cradle. These mobile phone cradles can be ob-
tained from an authorized Mercedes-Benz Cen-
ter. For more information about telephone
( page 300). i Wenn Sie ein Mobiltelefon mit Bluetooth be-
nutzen, knnen Sie eine Bluetooth-Verbindung zu Ihrem Audio-System mit CD-Wechsler her-
stellen ( page 189). Vehicles with COMAND*:
Refer to separate operating instructions. Switch on the telephone and audio sys-
tem or COMAND* (Vehicles with CO-
MAND*: Refer to separate operating instructions). Press ( or & to select the Tel menu. 157 Controls in detail Control system Which messages will appear in the multifunction display depends on whether your telephone is switched on or off:
If the telephone is not inserted in the cradle, the message in the multifunc-
tion display is: No telephone inserted. If the telephone is off, the message Tel off appears in the multifunction display. If the PIN or unlock code is not yet en-
tered, the message in the multifunction display is Please enter PIN or Enter unlock code. If the telephone is switched on, the telephone will then search for a net-
work. During this time, the message No Service appears in the multifunc-
tion display. If no network available, the multifunction display message No Serviceis shown continuously. If the telephone is on, as soon as the telephone has found a network, Ready or Ready (Roaming) appears in the multifunction display. 158 This standby message indicates that your telephone is ready for use and you can operate it using the control system. Entering the PIN or unlock code Enter the PIN or unlock code using the keypad on the audio controll unit, audio controller, Voice Control* or tele-
phone*. The telephone will then search for a network. During this time, the message No Service appears in the multifunc-
tion display. You may carry out the following functions:
Function Dialing a number from the phone book Redialing Answering a call Ending a call or rejecting an in-
coming call Page 159 160 160 160 Dialing a number from the phone book i When you insert a Mercedes-Benz approved mobile phone into the cradle*, the control sys-
tem reads in the phone book that is saved on the SIM card or in the phone book of the mobile phone. This can take several minutes, depending on how many entries each phone book contains. When you press %, $, (, & or
# during the download of the phone book the message Reading telephone data, please wait... appears in the multifunction display. When the message: Reading telephone data, please wait... disappears, the phone book has been loaded. If your telephone is ready to receive calls, you may select and dial a number from the phone book at any time. Log on to the network ( page 158). Press % or $ or # to switch to the phone book. The stored names are displayed in ascending alphabetical order. Press % or $ to select the de-
sired name. 1 Name from the phone book i If you press and hold % or $ for more than 1 second, the system scrolls rapidly through the list of names. If you press and hold % or $ for more than 4 seconds, the control system shows the first four entries of the letter next used. Release the button to stop the quick search. The search stops automatically at the end of the list. Press s or # to start dialing. If several entries are present for the same name, they are all shown. Press % or $ to select the desired entry. Press s or # to start dialing. Controls in detail Control system The message Connecting call ap-
pears on the multifunction display, as well as the dialed telephone number or name as long as it is stored in the phone book. The dialed number is saved in the Di-
aled numbers list. Once a connection has been estab-
lished, the name appears on the multi-
function display, provided that it has been stored in the phone book, other-
wise the dialed telephone number ap-
pears. i If you do not want to dial from the phone book, press t or L. In the multifunction display appears again Ready or Ready (Roam-
ing). 159 Controls in detail Control system Redialing The control system stores the most recent-
ly dialed phone numbers. This eliminates the need to search through your entire phone book. Log on to the network ( page 158). Press s to switch to the number and/or name last dialed in the redial memory. Press % or $ to select the de-
sired number and/or name. Press s or # to start dialing. Once a connection has been estab-
lished, the name appears in the multi-
function display, provided that it has been stored in the phone book, other-
wise the dialed telephone number ap-
pears. 160 Answering a call When your telephone is ready to receive calls, you can answer a call at any time. When you are in the Tel menu, you will see the following message on the multi-
function display:
Ending a call or rejecting an incoming call You can ending a call or rejecting an in-
coming call at any time. Press t to end or reject a call. Press sto take the call. You have answered the call. The duration of the call appears in the multifunction display. i The callers number appears only if it is transmitted. The callers name appears only if the number and the name are stored in the phone book. Audio system Audio and telephone, operation These instructions are intended to help you become familiar with your Mercedes-Benz audio system. They con-
tain useful tips and a detailed description of the user functions. Warning!
G In order to avoid distraction which could lead to an accident, the driver should enter system settings with the vehicle at a standstill and operate the system only when road and traffic conditions permit. Always pay full attention to traffic conditions first before operating system controls while driving. Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your car is covering a distance of 44 feet
(approximately 14 m) every second. Audio system overview 1 2 Controls in detail Audio system 4 5 6 3 Item 4 Delete button 5 Audio controller 6 Back button Page 179 179 178 Item 1 Audio display 2 Opening button 3 Audio control unit Page 177 177 174 173 Audio control unit With the audio control unit you can:
switch the audio system on/off adjust the volume select the operating modes enter telephone numbers and accept, reject, initiate and end telephone calls load and eject CDs Controls in detail Audio system Operating safety Audio system components Warning!
G Any alterations made to electronic components can cause malfunctions. The radio, amplifier, CD changer*, satellite radio*, and telephone* are interconnected. When one of the components is not opera-
tional or has not been removed/replaced properly, the function of other components may be impaired. This condition might seriously impair the operating safety of your vehicle. We recommend that you have any service work on electronic components carried out by an authorized Mercedes-Benz Center. With the audio system you can operate the following main functions:
audio function with the radio, SatRadio*, disc (CD audio or MP3 mode) the telephone* with the text message*
communication functions (SMS*) and the adress book various system settings The audio system consists of the following:
audio control unit audio display audio controller with back and delete button In addition, the audio system can also be operated with the multifunction steering wheel ( page 148). In these instructions, the keypad (right side of audio control unit) and the function buttons are referred to as buttons. 174 Audio control unit overview 2 1 3 4 5 16 15 14 13 12 11 10 9 8 7 Controls in detail Audio system 6 175 Controls in detail Audio system Item 1 Switching to radio mode Switching wavebands Switching to SatRadio*
mode Page 192 192 2 Switching to CD audio or 210 MP3 mode 3 Disc slot Loading CDs Ejecting CDs Updating the map software 4 Load/eject button 5 Clear button for functions Entering the PIN Entering a telephone number Deleting digit or entire entry 210 179 229 239 240 Item 6 Keypad Tuning to a station via the station memory Storing stations manually Entering the PIN Entering a telephone number Sending DTMF tones 7 Tuning to a station via station search Fast forward Selecting next track 8 Switching audio on/off 9 Setting the volume a Tuning to a station via sta-
tion search Fast reverse Selecting previous track Page Item b Confirming PIN Accepting a call Initiating a call Redial c Rejecting a call Ending an active call Rejecting call waiting d Opening system menu e Switching sound on/off Switching hands-free microphone on/off Cancelling reading out of text message*
f Switching to telephone mode g Sound settings 194 195 194 216 216 184 185 194 216 216 Page 230 241 239 240 241 240 242 188 185 242 245 223 185 176 Audio display Das Audio Display ist durch eine Abdeck-
ung geschtzt.
! Do not place any objects in front of or be-
hind the audio display and/or secure any ob-
jects to the audio display itself. This may obstruct the movement when the audio display is being folded in/out. The audio display could be damaged. Avoid touching the audio display at all times. The display has a very sensitive high-gloss surface, there is a risk of it being scratched. Do not press directly in the display face. Otherwise, the audio display will be damaged. i For information about cleaning and care of the audio display, see Audio display
( page 380). Audio display cover 1 Opening button Opening: Press opening button 1. The audio display cover opens, the au-
dio display is visible, and the audio sys-
tem switched on. Closing: Press the audio display cover down until it engage. Wenn das Audio System noch einge-
schaltet ist, knnen Sie weiter Radio oder CD hren und das Gert ber die Tasten an der Bedieneinheit bedienen. Controls in detail Audio system i Die Bedienung des Audio Systems ber den Audio Controller ist bei geschlossener Abdeck-
ung nicht mglich. Display The currently selected mode and the asso-
ciated menus are shown on the audio dis-
play. The audio display is divided into several areas. For example, radio selected 1 Menu bar 2 Main area 3 Status line The status line 3 displays the time and the current settings for radio and telephone mode. 177 Controls in detail Audio system You can request the required function using the menu bar 1. The selection is made using the audio con-
troller. Wenn ein Mobiltelefon betriebsbereit ist, werden zustzliche Informationen in der Statuszeile angezeigt:
Im Grundmen TEL: Name des Netzanbieters (Komfort-Telefonie) oder das Bluetooth* - Gert (Telefonie ber die Bluetooth* - Schnittstelle). Feldstrke des Mobilfunknetzes <SYM-
BOL EINFGEN>
Hrersymbol 4 S Briefsymbol q In this example, the audio main function is set to the radio mode and the main area 3 is active. i The layout of the menus may vary depending on your vehicles equipment. This manual shows the menus for a fully equipped vehicle. 178 Instrument cluster multifunction display This section describes features and con-
trols via the audio control unit, display and controller only. Please refer to the Instrument cluster control system section of this manual
( page 147) for function descriptions and operation of the instrument cluster multi-
function display and multifunction steering wheel buttons as they relate to audio func-
tions described in this section. Back button 1 BACK button Switching to the next highest menu:
Press back button BACK briefly. The audio system switches to the next highest menu level within the currently active mode. i You can also exit a menu or list by sliding the audio controller omp or qmr in the opposite direction of the menu or list orientation. Switching to the main menu: Press and hold back button BACK. The audio system switches to the basic menu of the currently active mode. Clear button Audio controller CLR 1 Clear button (CLR) To delete an individual character:
Briefly press the clear button CLR. To delete an entire entry: Press and hold the clear button CLR until the en-
try is deleted. 1 Audio controller The menu functions are selected on the audio display using the audio controller. For this purpose, a selector bar is moved. In this way, you can open menus or lists, move within menus or lists, and quit menus or lists. Controls in detail Audio system Operating audio controller The audio controller features the following options:
press briefly or press and hold n rotate to the left or right ymz slide to the left or right omp slide up or down qmr i Die Bedienung des Audio Systems ber den Audio Controller ist bei geschlossener Abdeck-
ung nicht mglich. 179 Controls in detail Audio system Symbol n How to use the COMAND controller Press briefly. Press and hold until the selected ac-
Function Confirms the selecting of a menu item or list entry. Save a station. ymz qmr omp tion has been carried out. Rotate. Slide. Slide. Slide and hold. Move through vertical or horizontal menus or through lists. Move through text. Program settings. Move through vertical menus or lists. Exit horizontal menus. Move through horizontal menus. Exit vertical menus. Fast forward or reverse for audio CD playback. 180 Menu The illustration below shows the structure of the modes and their menus. Each mode has a basic menu. In the menu line of the basic menu display are serveral menu items listed. Each menu item in turn has several sub-
menu items. Controls in detail Audio system Button RADIO Mode/Basic menu Radio DISC Disc TEL SYS Telephone*
System Menu Radio (FM/AM) Sat Radio (USA only) Memory Sound CD/MP3 Track list/folder list CD-changer*
Sound Telephone*
Name SMS (nur Komfort-Telefonie*) Anruflisten System Language Page 190 197 195 185 205 216 211 185 219 234 244 238 188 189 181 Controls in detail Audio system Calling up an operating mode Press the respective button (RADIO, DISC, TEL, or SYS) on the audio control unit. The basic menu of the selected mode appears in the audio display. The main area is active. Der aktive Bereich ist hell unterlegt i Die folgenden Bilder zeigen das Audio Dis-
play im Tagdesign. Je nach Displaydesign sehen die Hervorhebungen im Men etwas anders aus. Horizontal menus Vertical submenus Moving through the menu bar:
Moving through the menu:
Slide omp or rotate ymz. A white bar under the menu indicates the selected menu. Slide qmr or rotate ymz. A white bar under the submenu indi-
cates the selected submenu. Confirm the selected menu item:
Confirm the selected submenu Press n. item: Press n. Exiting the menu bar without con-
firming a selection: Slide qm in the opposite direction of the list orienta-
tion. Illustration: radio function basic menu Moving to the menu bar: Slide mr. or Press back button BACK. Exiting a menu without confirming a selection: Slide omp in the opposite direction of the list orientation. or Press back button BACK. 182 Example of how to use the audio system Example: direct frequency input, FM 104.6 MHz. In the descriptions below, the mode always serve as the starting point for locating the individual menu items. Example:
RADIO Radio Frequency Entry The individual steps for the above-men-
tioned example are described below. Press button b on audio control unit repeatedly until desired waveband FM has been selected. Switching to the menu bar:
Slide mr. Controls in detail Audio system Selecting Radio in the menu bar:
Confirming selection: Press n. Slide om or rotate ymz. The Frequency Entry submenu ap-
pears. Confirming selection: Press n. The Radio menu is selected and a list of submenus appears. Selecting Frequency Entry in the Radio menu: Slide mr. i If you enter a frequency in the respective waveband which is outside the frequency range, the audio system tunes in to the next lowest frequency. Enter 1011 with the keypad on the audio control unit. The audio system tunes in to the fre-
quency entered. 183 Controls in detail Audio system Operation Switching audio system on or off In the following descriptions, an operation step is described as in example below. Select RADIORadioFrequency Entry is the short for Press button b on audio control unit repeatedly until desired waveband has been selected. Slide mr. Slide om or rotate ymz the audio con-
troller to select Radio. Press the audio controller n. The Radio menu is selected and a list of submenus appears. Slide qm or rotate ymz the audio con-
troller to select Frequency Entry. Press the audio controller n. The Frequency Entry submenu is se-
lected and appears in the audio dis-
play. 184 Rotary control/push button D 1 Push button D 2 Rotary control Switching on: Press push button D. or Open the audio display cover. or If the audio system was on as you switched off the ignition, turn the SmartKey in the starter switch to position 2. The audio system will come back on with the last selected function. i If the audio system is switched on without the SmartKey in the starter switch, it will automatically switch off again after approx. 30 minutes. If your vehicle is equipped with a telephone*, the audio display may prompt you to enter your PIN
(GSM network) or code (TDMA or CDMA net-
work). Switching off: Press push button D. or Turn the SmartKey in the starter switch to position 0. i Should excessively high temperatures occur while the audio system is being operated, the audio display will dim. If temperatures continue to rise, HIGH TEMP will appear in the audio dis-
play, after which the audio system will be switched off for a cooling-down period. i When you switch off the audio system, you also switch off the currently playing audio source and the telephone* operating via audio control unit is not possible. Adjusting volume Rotary control/push button D 1 Push button D 2 Rotary control Adjusting: Turn rotary control 2. The volume will increase or decrease depending on the direction turned. Controls in detail Audio system Adjusting volume for telephone calls In hands-free mode, you can adjust the vol-
ume of a telephone call while the call is currently active. During a telephone call:
Turn rotary control 2. The volume will increase or decrease depending on the direction turned. Sound To switch on/off: Press button F on the audio control unit ( page 174). The sound of the current audio source is switched on or off. i When the sound is switched off, the symbol F appears in the status line. If you change the audio source, or alter the vol-
ume, the sound is automatically switched on again. Selecting sound settings You can select different sound settings for each individual audio source. The particu-
lar Sound menu can be opened from the basic menu for the desired operating mode, or by pressing the O button on the audio control unit. Example:
RADIOSoundBass Adjusting bass or treble Press O button repeatedly until Bass or Treble appears in the audio display. or Select SoundBass or Treble. The setting last selected is indicated by an red pointer. 185 Controls in detail Audio system Example Bass To change setting: Slide rmq or rotate ymz until desired treble or bass setting is reached. To save setting: Press n. The setting is stored and the menu is exited. To exit menu without saving: Press the button BACK or slide omp. Adjusting balance or fader Balance is used to determine whether the sound focus should be shifted toward the drivers side or the passengers side. 186 Surround sound*
If your vehicle is equipped with the har-
mann/kardon LOGIC7 Surround Sound system, you can choose between LOGIC7 ON and LOGIC7 OFF for sur-
round sound. Harman/kardon LOGIC7 Surround Sound is available for the following operating modes:
Radio (FM only) SatRadio* (USA only) CD audio MP3 AUX Fader is used to determine whether the sound focus should be shifted toward the front or rear of the vehicle Select Sound Bal/Fad. The current setting is indicated by an red cross-hair symbol. Adjusting balance and fader To change setting: Slide rmq or omp until desired balance/fader setting is achieved. To save setting: Press n. The setting is stored and the menu is exited. To exit menu without saving: Press the button BACK. i The LOGIC7 ON function of the harman/kardon LOGIC7 Surround Sound sys-
tem permits the playback of discrete 5.1 and ste-
reo recordings with an optimal surround sound platform for each passenger. Music on CDs with high-resolution surround formats such as MLP, DTS or Dolby Digital are played back optimally. The LOGIC7 distributes the 5.1 surround infor-
mation over the 13-channel system architecture to provide the optimum sound experience on all seats. This produces the sound characteristic as intended by the sound engineer during the origi-
nal recording. Harman/kardon LOGIC7 converts all two-chan-
nel stereo sound material into multi-channel sur-
round sound. The surround information stored during the original recording is read out using LOGIC7 and likewise distributed over the 13 channels. No effects are created during this process; only that which was already there be-
comes audible. In addition, harman/kardon LOGIC7 moves the perceived sound source away from the individual loudspeakers, thus generating a natural 360 sound experience for each passenger. Controls in detail Audio system i By selecting LOGIC7 OFF, all compatible formats are played back as they are present on the medium. Due to the vehicles spatial charac-
teristics, an optimal sound experience is not en-
sured on all seats. Adjusting surround sound With surround sound, you can choose be-
tween LOGIC7 ON and LOGIC7 OFF. Select Sound Sound. i Discs supporting the above mentioned audio formats display the following logos:
Dolby Digital DTS MLP A dot w indicates the current setting. To select a setting: Slide rmq or rotate ymz. To save setting: Press n. The setting is stored and the menu is exited. To exit menu without saving: Press the button BACK or slide omp. 187 Controls in detail Audio system i Balance und Fader werden automatisch auf den Standardwert (0/0) gestellt, wenn Sie LOGIC7 ein- oder ausschalten. SYS menu SYS settings menu overview Menu System Display Page 188 Brightness Day Mode Night Mode Automatic Activate Bluetooth*
Reset Language 189 189 189 i Please note the following:
For an optimal sound experience at all seats, the balance and fader should be adjusted to the center of the passenger compartment with LOGIC7 switched on. The best sound results are achieved when playing high-quality audio CDs. For MP3 tracks, the bit rate should be at least 128 kbit/s. Surround playback does not function with mono-signal sources such as the medium waveband in radio mode. In the case of poor radio reception quality, e.g. in tunnels, LOGIC7 should be switched off, as otherwise a dynamic switchover from stereo to mono and thus temporary sound characteristic shifts can occur. With certain stereo recordings, the resulting sound characteristic may deviate from con-
ventional stereo playback. 188 Display settings Sie knnen die Helligkeit des Audio Dis-
plays an die aktuellen Lichtbedingungen anpassen. Setting the display design Select SYS System Display. Select Brightness, Day Mode, Night Mode or Automatic. i Wenn Sie Brightness whlen, erscheint eine Einstellskala, auf der Sie die Helligkei man-
uell einstellen knnen. In the Automatic setting, the audio system an-
alyzes the automatic vehicle light sensor and switches between the display designs automati-
cally. Reset i You can reset the audio system back to its factory settings. In this case, all personal data (e.g. address book entries), among other things, are deleted. Ein Reset empfiehlt sich z.B. vor dem Verkauf Ihres Fahrzeugs. Select SYS System Reset. A prompt appears asking whether you really want to reset. Select Yes or No. If you select Yes another prompt will appear asking whether you really want to reset. Select Yes or No. If you select Yes, the audio system will be reset and restarted. Bluetooth* settings (audio system with CD changer*) General information about Bluetooth Bluetooth technology is the standard for short-range wireless technologies, suitable for transmitting voice and data. It is possi-
ble to connect Bluetooth devices wire-
lessly. Bluetooth can be used to exchange vCards or make calls using a headset. Bluetooth technology uses the freely available ISM (Industrial Scientific Medi-
cal) wireless network that works at 2.45 GHz. Ranges of up to ten meters are possible with Bluetooth. Activate or deactivate Bluetooth Select SYS System Activate Bluetooth. You have activated or deactivated Bluetooth. A checkmark appears when Bluetooth is activated. Controls in detail Audio system Setting the system language Select SYS Language. The language list appears. A dot R in-
dicates the current setting. To change the setting: Slide rmq or rotate ymz and select desired lan-
guage. To save setting: Press n. The setting is stored and the menu is exited. To exit menu without saving: Press the button BACK or slide omp. 189 Controls in detail Audio system Radio operation Warning!
G Please devote your attention first and fore-
most to the traffic situation you are in. Before your journey, please familiarize your-
self with the radio functions. Only use the COMAND when road and traffic conditions permit you to do so. Otherwise you could be involved in an accident in which you or others could be injured.
! Kleben Sie keine metallische Folie auf die Innen- oder Auenseite der Heckscheibe. Ein Ab-
decken der Antennenstruktur an der Heck-
scheibe strt den Radioempfang. Beim Zuschneiden der Folie auf der Scheibe knnen die Antennenleiter dauerhaft beschdigt werden The radio mode is interrupted by an incoming call on the telephone*
( page 219). 190 Controls in detail Audio system Menu overview i The components and operating principles of the audios sytem can be found on ( page 183). Information about sound settings can be found on( page 185). Radio
(except Weather Band) Station list
(in FM waveband only) Enter frequency Station information
(in FM waveband only) Memory
(except Weather Band) Autostore List of stored stations Channel
(only Weather Band) List of receivable channels Sound Treble Bass Balance/Fader Surround sound*
191 Controls in detail Audio system Switching to radio mode Press button b on audio control unit. The radio basic menu appears in the audio display once you have switched to radio mode. You will hear the station/channel last tuned in in the previously selected waveband, provided that the station/channel can be received. Illustration: radio mode in FM waveband 1 Status line 2 Main area with station list 3 Station name 4 Store position of station 192 i Station names 3, available for the FM waveband, can only be seen when the station transmits a name. In the WB waveband, the audio system displays the channel names instead of the station names and/or frequency. Calling up wavebands You can choose from among the FM, AM and WB wavebands and then request the SatRadio mode*. Pressing again will switch back to FM radio mode. Anzeigen in der Statuszeile (Beispiel) In der Statuszeile sehen Sie folgende Infor-
mationen:
Uhrzeit (19:09) Wellenbereich mit aktueller Senderfre-
quenz (FM 92.0 MHz) Wenn ein Mobiltelefon betriebsbereit ist, werden zustzliche Informationen an-
gezeigt:
Feldstrke des Mobilfunknetzes (Sym-
bol einfgen) Hrersymbol 4 S. Frequency Waveband WB (Weather Band) Weather channels FM AM 87.7......107.9 MHz 530.......1710 KHz Press button b on audio control unit repeatedly until desired waveband has been selected. The FM, AM, and WB wavebands and the satellite radio mode are called up one after another. The waveband currently selected appears in the statusline of the audio display. The last selected station in the selected waveband is heard. Selecting a station/channel You have the following selection options:
The station list
(only FM waveband) The channel list
(Weather Band) The station search function
(only AM waveband) The channel search function
(Weather Band) Station memory
(except Weather Band) The manual frequency entry
(except Weather Band) The station search proceeds in the following frequency increments:
200 kHz in FM range 10 kHz in AM range Selecting a station/channel using the station/channel list i The station list is only available for the FM waveband. It contains all the stations that can be currently received and is sorted by station fre-
quencies. The channel list is only available for the Weather Band (WB). It contains all the channels that can be currently received and is sorted by channel number. Press button b on audio control unit repeatedly until the FM/WB wave-
band is selected. Slide omp or rotate ymz when the main area in the basic menu is active. or Press G or H button on audio control unit. or Select RadioStation List or Channel List (in Weather Band). The station/channel list appears in the audio display. Controls in detail Audio system The dot R in front of a list entry indicates the currently selected station/channel. A number in front of the list entry, in the sta-
tion list, indicates the stored position in the station memory. To select a station/channel: Slide qmr or rotate ymz. To tune to the selected sta-
tion/channel: Press n. or Press desired station button 1 to R in FM mode (if station is stored in memory) or, press desired channel button 1 to 7 in WB mode. Weather Band (WB): If a channel cannot be tuned in, a search is automatically started. 193 Controls in detail Audio system Tuning to a station/channel via station/channel search function i The search function search for the next receivable station only in the AM waveband. In Weather Band (WB) the search function search for the next receivable channel. Press button b on audio control unit repeatedly until the AM/WB waveband is selected. Slide omp or rotate ymz when the main area in the basic menu is active. Depending on the direction in which the controller is being slide or rotate, the system searches upward or down-
ward and stops at the next receivable station/channel. or Press button G or H on audio control unit. Depending on the pressed button, the system searches upward or downward and stops at the next receivable station/channel. 194 i If no AM station is received after two con-
secutive scans of the complete frequency range, then the scan stops at the station with which it began. If no weather band channel is received after three consecutive scans of the complete fre-
quency range, then the scan stops at the chan-
nel with which it began and NO WB FOUND appears in the display. If this happens, switch back to standard radio mode. Selecting a station using station memory i This function is not available for Weather Band. Press b button on audio control unit repeatedly until desired waveband has been selected. Select Memory. or Press n when the main area is select-
ed. The memory menu appears. The dot R in front of a memory position indicates that the currently selected station is saved there. Select station in memory by rotating ymz or sliding qmr and press n. or Press desired station button 1 to R, with the keypad in audio control unit briefly. Tuning to a station by entering the fre-
quency manually i This function is not available for Weather Band. Select RADIORadioFrequency Entry. The menu for manual frequency entry appears. Controls in detail Audio system Frequency entry with audio control-
er: Slide qmr or rotate ymz to in-
crease or decrease a number. Slide omp to select the next number. If the frequency is entered, press n to confirm the frequency entry. i If you enter a frequency in the respective waveband which is outside the frequency range, the audio system tunes in to the next lowest frequency. If a button is not pressed within 4 seconds, the radio will return to the last station tuned. Exiting menu without making an en-
try: Press BACK button in the center console ( page 178). Storing stations You can store ten AM and ten FM stations in the memory. i Wenn ein gewhlter Speicherplatz schon belegt ist, wird er durch den neuen Sender ber-
schrieben. Storing stations manually with keypad Tune in desired station. Basic menu is shown in the audio display. Press and hold desired station button 1 to R until a brief signal tone sounds. The station is stored. 195 or Press button u, on the keypad in audio control unit briefly. Frequency entry with keypad:
Enter desired frequency with buttons 1 to R, with the keypad in audio control unit briefly. The audio system tunes in to the fre-
quency entered. Controls in detail Audio system Storing stations manually with station memory menu Tune in desired station. Basic menu is shown in the audio display. Press n when the main area is active. or Select Memory. The station memory display appears in the audio display. The dot R in front of a memory position indicates that the currently tuned station is stored there. 196 Selecting a memory position:
Slide qmr or rotate ymz. Storing a station to a selected mem-
ory position: Press and hold n until a brief signal tone sounds. or Press and hold desired station button 1 to R on keypad, until a brief signal tone sounds. The station is stored. Autostore automatic station memory i This function is not available for Weather Band. The autostore function automatically as-
signs receivable stations to the memory, sorted according to reception quality. The stations which were stored in the station memory manu-
ally are completely lost in this process. Press b button on audio control unit repeatedly until desired waveband has been selected. Basic menu is shown in the audio display. Press n when the main area is active. or Select Memory. The station memory display appears in the audio display. Slide qmr or rotate ymz to select Autostore. Press n. The audio system searches for receivable stations. A corresponding message is dis-
played. The available stations are automat-
ically stored in memory. The first received station will be automatically played. Cancelling storage procedure:
Press delete button CLR in the center console. or Press button C in the audio control unit. Satellite radio*
Warning!
Only use the audio system when road and traffic conditions permit you to do so. Other-
wise you could be involved in an accident in which you or others could be injured. G Please devote your attention first and fore-
most to the traffic situation you are in. Before your journey, please familiarize your-
self with the radio functions. Submenu overview i The components and operating principles of the audio system can be found on ( page 183). Presets Station presets Info Show program info Category Select category SatRadio Channel List Save Channel Channel Entry Service Controls in detail Audio system Sound Treble Bass Balance/Fader Surround sound*
197 i Note that categories and channels shown in illustrations are dependent on programming con-
tent delivered by the service provider. Program-
ming content is subject to change. Therefore, channels and categories shown in illustrations and descriptions contained in this manual may differ from the channels and categories delivered by the service provider. i Satellite radio service may be unavailable or interrupted from time to time for a variety of rea-
sons, such as environmental or topographic con-
ditions and other things we cant control. Service might also not be available in certain places
(e.g., in tunnels, parking garages, or within or next to buildings) or near other technologies. In such situations, the satellite radios main menu shows the Acquiring signal... screen. At this point, the radios functions are restricted and the service info display ( page 204) appears. Subscribing to satellite radio Press button b on audio control unit repeatedly until satellite radio SatRadio is selected. If the satellite radio service is not acti-
vated, the SIRIUS Preview display ap-
pears. The following options are possible:
Satellite radio service is not activated Satellite radio service is fully acti-
vated Controls in detail Audio system Introduction to Satellite radio i Additional satellite radio equipment and a subscription to SIRIUS satellite radio service pro-
vider are required for the satellite radio opera-
tion described in this chapter. Contact an authorized Mercedes-Benz Center for details and availability for your vehicle. SIRIUS Satellite Radio provides over 100 channels, so called streams, of digi-
tal-quality radio, among others music, sports, news, and entertainment free of commercials. SIRIUS Satellite Radio uses a fleet of high-power satellites to broadcast 24 hours per day, coast-to-coast, in the contiguous US. This diverse, satellite-delivered program-
ming is available for a monthly subscrip-
tion fee. For more information and service availabil-
ity call the SIRIUS Service Center
( page 204), or go to www.siriusradio.com. 198 Satellite radio service is not activated The telephone number of the SIRIUS Ser-
vice Center and the twelve-digit electronic serial number (SIRIUS-ID) of the particular receiver are displayed. COMAND 216 fr 204 neu beauftragt This information is required when calling the SIRIUS Service Center for an activation request. Closing screen: Press n. To activate satellite radio service:
Contact satellite radio service provider at the telephone number displayed in the service display. After the connection is made:
Follow the instructions given by the op-
erator. The activation process may take up to 10 minutes. If it is successful, you will see the display with the message Acquiring Signal... followed by the satellite radio basic menu. i Credit card information is also required for your application. The activation process takes approximately 5 to 10 minutes after calling the SIRIUS Service Cen-
ter. If a satellite receiver is not installed or not prop-
erly installed:
The message Device unavailable will appear. Controls in detail Audio system Satellite radio service is activated The basic satellite radio menu appears. You will hear the channel last tuned in, pro-
vided that it can be received. Switching on See Subscribing to satellite radio for im-
portant subscription information. Press button b on audio control unit repeatedly until satellite radio SatRadio is selected. The message Acquiring Signal... will appear when the signal is not available. After the audio system acquires the signal, the satellite radio basic menu will appear. The station last tuned to will begin to play. 199 Controls in detail Audio system Main satellite radio menu 1 Main area with channel display 2 Preset position of selected channel 3 Selected channel 4 Selected program category 5 Sound settings 6 To select program category 7 Current artist and title 8 Channel information 9 Preset options a Satellite radio options 200 i Main area 1 can show all channels includ-
ed in your subscription. Which channels are shown depends on the selected program catego-
ry 4. Note that categories and channels shown in illus-
trations are dependent on programming content delivered by the service provider. Programming content is subject to change. Therefore, channel and categories shown in illus-
trations and descriptions contained in this man-
ual may differ from the channels and categories delivered by the service provider. Selecting program category i The channels are categorized. Categories al-
low you to tune to stations broadcasting a cer-
tain type of program. Satellite radio channels are split up into categories such as News, Sports News, or Country Music, if available. The category list is sorted alphabetically. Call up category list: Select RADIO SatRadio Category. or Slide omp or rotate ymz until Cate-
gory is highlighted. The category list appears. Select a category: Slide qmr or ro-
tate ymz. Set the selected category: Press n. The selected program category (alpha-
betical order) will appear in the audio display. The channel last tuned in the new category will begin to play. When selecting a channel using the channel search function or the channel list, you have access to the channels you subscribe to and which are includ-
ed in the selected category. i When you select the category All Chan-
nels, you have access to all the channels you subscribe to, regardless of category, when you are tuning in a channel using the channel search function or the channel list. Tuning in channels You have the following selection options:
The channel skip function The manual channel number entry The channel list The channel presets Depending on the pressed button, the system searches upward or downward and stops at the next receivable channel. i Which channels are available depends on which channels you have subscribed to and the program category you have selected
( page 200). Tuning in channels using channel search function Slide omp or rotate ymz when the main area in the basic menu is active. Depending on the direction in which the controller is being slide or rotate, the system skips upward or downward and stops at the next subscribed chan-
nel. or Press button G or H on audio control unit. Tuning in channels using manual chan-
nel number entry Select RADIO SatRadio Enter Channel. The menu for manual channel number entry appears. or Press button u, on the keypad in audio control unit briefly. Channel number entry with keypad:
Enter desired channel number with buttons 1 to R, with the keypad in audio control unit briefly. Controls in detail Audio system Further operation depends on whether the selected channel number is valid or if the channel is included in your subscription. Exiting menu without making an entry: Press BACK button in the center console ( page 178). Channel number is valid and channel is included in subscription: The audio sys-
tem tunes in the channel entered. Channel number is invalid: The message Invalid Channel appears in the audio dis-
play. Press n to close the message in the audio display. 201 Controls in detail Audio system Channel number is valid, but channel is not included in subscription: The mes-
sage Please call SIRIUS to subscribe pops up ( page 199). Press n to close the message in the audio display. Tuning in channels using the SatRadio channel list Select RADIO SatRadio Chan-
nel List. The channel list appears. The dot R in front of a list entry indicates the cur-
rently selected channel. Select channel by rotating ymz or sliding qmr. Press n to confirm. i The contents of the channel list depends on which channels are included in your subscription and which program category you have selected
( page 200). If only the preview channel is acti-
vated, the channel list contains only the preview channel. 202 Tuning in channels using SatRadio chan-
nel presets Select RADIO SatRadio Pre-
sets. or Press n when the main area is select-
ed. The preset menu appears. The dot R in front of a preset position indicates that this is the channel currently select-
ed and being listened to. or Press desired station button 1 to R, with the keypad in audio control unit briefly. The audio system tunes in the correspond-
ing channel as long as it is included in your subscription and is still available. If the channel is not included in your sub-
scription, you will see the message de-
scribed in the section Satellite radio service is not activated ( page 199). If the channel is no longer available, you will see the message Invalid Channel. Closing message: Press n. Select station in memory by rotating ymz or sliding qmr. Press n to confirm. Storing channels Storing a preset position: Press and i There are ten preset positions available. Press n when the main area is select-
ed. or Select RADIO SatRadio Pre-
sets. In both cases, the preset menu will appear in the audio display. The dot R in front of a preset position indicates that the chan-
nel currently selected is stored there. Selecting a preset position:
Slide qmr or rotate ymz. hold n until you hear a signal. The channel is stored. or Press and hold desired channel button 1 to R on keypad, until a brief signal tone sounds. The channel is stored. Show program info Select RADIO SatRadio Info. i If the program provider does not offer any in-
formation, the Info menu item cannot be se-
lected. You will see a screen that may contain the following information (if available):
Selected program category Selected channel Artist of the track currently being played Name of current track Controls in detail Audio system i The program provider determines what in-
formation is displayed on the screen. The audio system shows no more than two lines per item of information. If an item of information is too long, the audio system shortens it. Mit der Taste # der Telefontastur rufen Sie ein Popup Display auf, das Ihnen, wenn verfgbar, den Interpret und den Titel des aktuell gespielten Titels anzeigt. Closing screen: Slide omp or press n. 203 Sound settings For sound adjusting see:
Volume ( page 185) Balance control and fader
( page 186) Bass and treble control ( page 185) Sourround sound* ( page 186) Channel update The service provider may conduct a chan-
nel update. During the update, the message Updating channels... will appear on the audio dis-
play. The channel last tuned will be muted until the update is completed. You cannot oper-
ated the satellite radio during the update. After completion of the update, the satel-
lite radio basic menu will appear. The sta-
tion last tuned to will begin to play. If not available, the next subscibed channel starting by channel 1. Controls in detail Audio system Calling SIRIUS Service Center i It may be necessary to call the SIRIUS Ser-
vice Center if, for example:
You want to cancel the subscription or re-subscribe at a later date. You forget to pay the bill. You sell the car to another person. Select RADIO SatRadio Ser-
vice. The telephone number of the SIRIUS Service Center and the twelve-digit electronic serial number (SIRIUS-ID) of the particular receiver are displayed. Closing screen: Slide omp or press n. 204 Controls in detail Audio system CD mode Submenu overview CD or MP3 Normal Track Sequence Random Tracks Random folder
(MP3 mode only) Aux Track list (Audio CD) or Folder
(MP3) Select track Select folder and/or tracks
(MP3 mode only) Changer
(only CD-changer*) Select medium Sound Treble Bass Balance/Fader Surround sound*
i The components and operating principles of the audio system can be found on ( page 183). Das Audio System ist entweder mit einem Single-CD-Laufwerk oder einem CD-Wech-
sler* ausgestattet. The single CD player and the CD changer*
can play audio CDs as well as CDs with MP3 files. Je nach Ausstattung und Datentrger vari-
ieren die Einstellmglichkeiten im Men. 205 Controls in detail Audio system Safety precautions Warning!
G The single CD player and the CD changer*
are classified as a Class 1 laser product. You must not open the casing. There is a risk of exposure to invisible laser radiation if you open the casing, or if the casing is faulty or damaged. The single CD player and the CD changer*
do not contain any parts that you are able to maintain yourself. For safety reasons, all maintenance work must be carried out by qualified technicians. Warning!
G Only carry out the following when the vehi-
cle is stationary:
Inserting a disc Ejecting a disc There is a risk of accident by being distract-
ed from road and traffic conditions if you load a CD while the vehicle is in motion. Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is covering a distance of 44 feet (approximate-
ly 14 m) every second. General notes i Audio CDs with copy protection are not compatible with the CD audio standard and therefore may not be able to be played by the single CD player and/or the CD changer*. There may be playback problems when playing copied discs. There is a large variety of discs, disc-writing soft-
ware and writers available. This variety means that there is no guarantee that the system will be able to play discs that you have written/copied yourself. There may be playback problems if you use CD-R or CD-RW type discs you have copied yourself with a storage capacity of more than 700 MB. These CDs are not compatible with currently ap-
plicable standards.
! If you affix stickers to the CDs, they can be-
come warped due to the heat that develops in the CD drive or CD changer*. In certain situations, the CDs can then no longer be ejected and cause damage to the drive. Such damage is not covered by the Mercedes-Benz Limited Warranty. 206
! Your CD drive or CD changer* has been de-
signed to play CDs which correspond to the EN 60908 standard. You can therefore only use CDs with a maximum thickness of 1.3 mm. If you insert thicker discs, e.g. ones that have data on both sides (one side with DVD data, the other side with audio data), they cannot be eject-
ed and will damage the drive. Do not use CDs with an 8 cm diameter, not even with a CD adapter. Attempting to play CDs with an 8 cm diameter or playing such CDs with an adapter may cause damage to the CD drive. Such damage is not covered by the Mercedes-Benz Limited Warranty. Only use round, 12 cm diameter discs. Should excessively high or low tempera-
tures occur while in CD changer mode*, CD ERROR will appear in the display, and the CD will be muted until the temperature has reached an acceptable level for the system to continue operation. The single CD player and the CD changer*
can play audio CDs as well as CDs with MP3 files. Controls in detail Audio system Tips on handling CDs Only touch the CDs at the edges. Handle CDs carefully to prevent interference during playback. Avoid scratches, fingerprints and dust on the CDs. The CDs must only be labelled using pens specially designed for this pur-
pose. Clean CDs from time to time with a commercially available cleaning cloth. Never wipe the CD in a circular motion;
instead, wipe it in a straight line start-
ing in the center and moving outward. Do not use solvents, anti-static sprays, etc. for cleaning. Replace the CD in its case after use. Protect CDs from heat and direct sunlight. 207 Controls in detail Audio system Notes about MP3 mode The single CD player and the CD changer*
can play audio CDs as well as CDs with MP3 files. i Due to the branched data structure, play-
back of the first track may be delayed slightly. Permissible media for MP3 files CD-DA CD-R CD-RW Permissible file systems ISO9660/Joliet for CDs 208 Multisession CDs For multisession CDs, the first session type of the CD determines how the audio system will process the CD. For example, if the first session type is ac-
cording to the audio CD standard and the second session type is according to the data CD standard containing MP3 tracks, the audio system will treat the CD as a con-
ventional audio CD. This means that it is only possible to access the audio CD tracks. Access to the MP3 tracks is not possible. Similarly, if the first session type is accord-
ing to the data CD standard containing MP3 tracks and the second session type is according to the audio CD standard, the audio system will treat the CD as a data CD. This means that it is only possible to access the MP3 tracks. Access to the au-
dio CD tracks is not possible. File structure on a disc When you create an MP3 disc, the MP3 tracks can be organized in folders. A folder can also contain other folders. A disc can contain a maximum of 255 folders. Each folder can contain a maximum of 255 tracks and 255 folders. A disc can contain a maximum of 4000 tracks. Usual-
ly this number will not be reached because each minute of an MP3 track requires ap-
proximately 1 MB of storage space. Track and folder names When you create an MP3 disc, you can as-
sign names to the MP3 tracks and folders. The audio system uses these names for the corresponding display in MP3 mode. Empty folders or folders which contain data other than MP3 tracks are not dis-
played by the audio system. If MP3 files are saved in the root directory itself (uppermost directory on storage me-
dium), the root directory will also be treat-
Controls in detail Audio system ed as a folder. The audio system will then show the name of the root directory as the folder name. You must observe the following when as-
signing track names:
Track names must have at least one character. Track names must have the extension mp3. There must be a period between the track name and the extension. Example of a correct track name:
Track1.mp3 The audio system is unable to recognize an MP3 track if:
there is no period between the track ti-
tle and the extension there is no extension i The audio system does not support ID3 tags. Permissible MP3 formats The audio system supports the MPEG1 Au-
dio Layer 3 format. i This format is generally known as MP3. i Only use MP3 tracks with a bit rate of at least 128 kbit/s or higher and a sampling rate of at least 44.1 kHz or higher. Smaller rates can cause a noticeable deterioration in sound quali-
ty. This is especially the case if you have activat-
ed the surround sound* function. Compatible file systems and compres-
sion methods The following compression methods are compatible:
MP3 WMA WAV AAC i If music files, created with different com-
pression methods, in addition to MP3 files, are stored together on a disc, the loading process may take longer before the first track is played. Permissible bit and sampling rates Fixed and variable bit rates up to 320 kbit/s Sampling rates of 24 kHz 48 kHz Notes on copyright The music tracks that you create for MP3 mode and can play back in MP3 mode are generally subject to copyright protection in accordance with the applicable interna-
tional and national regulations. In many countries, reproductions are not permitted without the prior consent of the copyright holder, not even for private use. Make sure that you know the applicable copyright regulations and that you comply with these. If you own these rights yourself, e.g. for your own compositions and recordings, or the copyright holder has granted you per-
mission, these restrictions do not apply. 209 Controls in detail Audio system Operating the CD player Das Single-CD-Laufwerk und der CD-Wechsler* haben dieselben Bedienele-
mente. Single CD player Switching to CD mode: Press button M on the audio control unit. Nach dem Umschalten erscheint die CD-Anzeige. Wenn eine CD eingelegt ist, wird sie automatisch abgespielt. Wenn keine CD eingelegt ist, wird die folgende Meldung angezeigt. 1 CD slot 2 Eject/load button 3 Forward 4 Rewind 210 Warning!
G Only insert a CD when the vehicle is station-
ary. There is a risk of accident by being dis-
tracted from road and traffic conditions if you load a CD while the vehicle is in motion. Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is covering a distance of 44 feet (approximate-
ly 14 m) every second.
! If a CD is already loaded, it must be ejected before inserting a new CD. Inserting a second CD in the slot with another CD still loaded will cause damage to the CD drive not covered by the Mercedes-Benz Limited Warranty. Ejecting a CD: Press eject/load button 2. The system ejects the CD. NO CD will appear in the display. Remove CD from CD slot 1. CD changer*
The CD changer can hold up to a total of 6 audio CDs Switching to CD mode: Press button M on the audio control unit. Nach dem Umschalten erscheint die CD-Wechsler-Anzeige. Wenn sich eine CD in einem Magazinfach befindet, wird diese automatisch abgespielt. Wenn keine CD eingelegt ist, wird die folgende Meldung angezeigt. i If you do not take the CD out of the CD slot 1 within approx. 15 seconds, the system automatically pulls the CD back in and plays it. If a CD is pulled back in, press eject/load button 2 for 5 seconds; the CD will then be ejected. i If the audio CD is printed on one side, this side must face upwards when loaded.If neither side is printed, the side to be played must face downwards. If a CD has been inserted incorrectly or cannot be read, WRONG CD ERROR will appear in the display. Loading a CD: Insert CD into CD slot 1. The system automatically pulls the CD into the CD slot 1 and starts to play the audio CD if it has been inserted cor-
rectly and is permissible. Controls in detail Audio system Warning!
G Only insert a CD when the vehicle is station-
ary. There is a risk of accident by being dis-
tracted from road and traffic conditions if you load a CD while the vehicle is in motion. Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is covering a distance of 44 feet (approximate-
ly 14 m) every second. i If the audio CD is printed on one side, this side must face upwards when loaded.If neither side is printed, the side to be played must face downwards. If a CD has been inserted incorrectly or cannot be read, WRONG CD ERROR will appear in the display. 211 Controls in detail Audio system Loading an individual magazine compartment: Press eject/load button 2. A menu indicates which magazine com-
partments are currently loaded. The first available magazine compartment is indicated by a red number. Press desired button 1 to 6, in the keypad to select a magazine com-
partment. or Slide omp or rotate ymz to select a magazine compartment. Press n to confirm. The CD changer will switch to the se-
lected magazine compartment. The message Please Wait... appears in the display. i Only insert a CD after the audio system has prompted you to do so with the message Please Insert Disc <X>. Only insert one CD per maga-
zine compartment. Insert CD into CD slot 1. The CD changer automatically pulls the CD into the CD slot 1 and places it in the selected magazine compartment. The message Loading Disc <X>
appears in the display. i The loading process may take a while, de-
pending on the type of disc. If you do not insert a disc, the display will switch back to the Maga-
zine menu after approximately 20 seconds. Press button M, or the eject/load button 2 on the audio control unit to finish the loading process. The CD changer plays the disc if it has been inserted correctly and is permissi-
ble. To interrupt loading procedure:
Press the eject/load button again. or Press BACK button in the center con-
sole ( page 178). Filling an empty magazine compart-
ments: Press eject/load button 2. A menu indicates which magazine com-
partments are currently loaded. The first available magazine compartment is indicated by a red number. Slide mr to select the menu bar. Slide omp or rotate ymz the audio controller to select Fill Empty Slots. Press the audio controller n. The message Please Insert Disc <X>
appears in the display. i Only insert a CD after the audio system has prompted you to do so with the message Please Insert Disc <X>. Only insert one CD per maga-
zine compartment. 212 To interrupt loading procedure:
Press the eject/load button 2 again. or Press BACK button in the center con-
sole ( page 178). The loading process has not been complet-
ed, the audio system will play the last in-
serted CD. Insert CD into CD slot 1. The CD changer automatically pulls the CD into the CD slot 1 and places it in an empty magazine compartment. The message Please Wait... appears in the display. If the CD is loaded, the CD changer will switch to the next empty magazine compartment. The message Please Insert Disc <X> appears in the display. Repeat the steps until all compart-
ments have been loaded. Press eject/load button 2 on the au-
dio control unit to finish the loading process. The CD changer plays the last loaded disc if it has been inserted correctly and is permissible. Controls in detail Audio system Ejecting CDs from CD changer*
Warning!
G Only eject a CD when the vehicle is station-
ary. There is a risk of accident by being dis-
tracted from road and traffic conditions if you unload a CD while the vehicle is in motion. Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is covering a distance of 44 feet (approximate-
ly 14 m) every second. i If you eject a CD while another is being played, the audio system interrupts playback. Playback will continue once the CD has been ejected completely. 213 Controls in detail Audio system Ejecting one CD: Press eject/load Remove the CD from CD slot 1. Ejecting all CDs: Press eject/load button 2. The magazine menu with active main area appears in the audio display. The magazine compartment with the cur-
rent CD is highlighted. If you do not remove the CD from the CD slot 1, the CD changer will auto-
matically pull the CD back in after a short while. button 2. The magazine menu with active main area appears in the audio display. The magazine compartment with the cur-
rent CD is highlighted. Press desired button 1 to 6, in the keypad to select a magazine com-
partment. or Slide omp or rotate ymz the audio controller to select the desired CD. Press n to confirm. 214 Slide mr to select the menu bar. Slide omp or rotate ymz the audio controller to select Eject all. Press n to confirm. Die CDs werden nacheinander aus-
gegeben. Remove the CD from CD slot 1. Playing CDs Example display in audio CD mode Controls in detail Audio system The CD changer switches to the next occupied magazine compartment and ejects the CD. If you do not remove the CD from the CD slot 1, the CD changer will auto-
matically pull the CD back in after a short while. Repeat the last step until the magazine is empty. Selecting a CD Select DISC Changer. The magazine menu with active main area appears in the audio display. The magazine compartment with the cur-
rent CD is highlighted. Slide omp or rotate ymz the audio controller to select the desired CD. Press n to confirm. i Der folgende Abschnitt gilt fr das Sin-
gle-CD-Laufwerk und den CD-Wechsler*. Die Beispiele zeigen das Audio-Display vom CD-Wechsler*
2 Zustzliche Tastenfunktionen Im CD-Betrieb knnen Sie zwei zustzliche Tasten der Telefontastur nutzen:
Taste #
zeigt Details zum Titel an, falls diese zusammen mit dem Titel auf der CD gespeichert wurden. ermglicht die Direkteingabe der Titelnummer. Taste *
1 Track number 2 Track name (only if saved on the disc) 3 Elapsed track time 4 Disc type and Disc number
(CD changer*) 215 Controls in detail Audio system Example display in MP3 mode 2 5 4 1 Track number 2 Track name (only if saved on the disc) 3 Elapsed track time 4 Folder number 5 Disc type and Disc number
(CD changer*) Pause function Pausing playback:
Press F briefly. Continuing playback: Press F again briefly. 216 Selecting a track Skipping forwards or backwards to a track: Rotate ymz. or Briefly press button G or H on audio control unit. i Skipping forwards through the tracks skips to the next track. Skipping backwards through the tracks skips to the beginning of the current track if the track has been playing for more than 8 seconds. If the track has been playing for less than 8 seconds, it skips to the start of the previ-
ous track. If you have switched on the Random Tracks playback option, the order of the tracks is ran-
dom. Selecting from the track list: Select DISC Tracklist. or Only in MP3 mode: Press n when the main area is selected. The track list of the current folder ap-
pears. The dotR indicates the current track. Select a track by rotating ymz or slid-
ing qmr. Press n to confirm. i In MP3 mode, the list shows all the tracks in alphabetical order. Fast forward/rewind Select main area. Slide and hold omp until desired place is reached. or Press and hold button G or H on audio control unit. Controls in detail Audio system Selecting a folder Select a track by sliding qmr or rotat-
Selecting an option: Select DISC i This function is only available in audio MP3 mode. Select DISC Folder. or Press n when main area is selected. The track list of the current folder ap-
pears. Selecting one folder higher: Select the Q symbol. The display changes to the next folder up in the folder structure on the disc. Selecting a folder: Slide qmr or ro-
tate ymz the audio controller, to se-
lect the desired folder. Press n to confirm. You will see the tracks in the folder. ing ymz the audio controler. Press n to confirm. The track is played and the correspond-
ing folder is now the active folder. Playback options The following options are available:
Normal Track Sequence Tracks playback in the order on the disc (e.g. track 1, 2, 3, etc.). Random Tracks Tracks playback in a random order
(e.g. track 3, 8, 5, etc.). Random Folder (in MP3 mode only) Tracks in the active folder and any sub-
folders playback in random order. CD/MP3. The option list appears. A dot R indi-
cates which option is switched on. Select an option and press n. The option is switched on. For all op-
tions except Normal Track Sequence, you will see a corresponding indicator in the main area. i The Normal Track Sequence option is au-
tomatically activated when you select a different medium. If an option is activated, it remains acti-
vated after the audio system is switched on/off. 217 Controls in detail Audio system Audio Aux mode Switching to Audio Aux mode i An external audio source (Aux) can be con-
nected to the audio system. The jack for this is located in the glove box. Please contact an au-
thorized Mercedes-Benz Center for more infor-
mation Warning!
G Only operate an external audio source (Aux) when the vehicle is stationary. There is a risk of accident by being distracted from road and traffic conditions if you operate an ex-
ternal audio source (Aux) while the vehicle is in motion. Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your car is covering a distance of 44 feet
(approximately 14 m) every second. Warning!
G Due to the different volumes of the external audio sources, system messages (e.g. traffic and navigation announcements) may be much louder. You may need to disable these system messages or adjust the volume of these messages manually. Selecting audio Aux mode: Select DISC CD/MP3 Aux. The audio Aux menu appears. The me-
dium in the external audio source is heard, provided it is connected and switched to playback. i Please refer to the relevant operating guide for operation of the external audio source. The following settings can be made in the audio Aux mode:
Volume ( page 185) Balance control and fader
( page 186) Bass and treble control ( page 185) Souround sound ( page 186) i The volume of external audio sources is ex-
tremly variable. It is possible that a device con-
nected as an external audio source will sound quieter or louder in the vehicle or that the usual maximum volume cannot be achieved. On cer-
tain devices the volume can be set separately. In this case, start at a moderate volume and in-
crease it slowly. In this way, you can determine whether the system is capable of playback with-
out distortion, even at high volume. Switch back to CD mode Select Back to CD in the audio Aux menu. The CD mode is switched on. 218 Telephone*
Safety precautions Warning!
G Some jurisdictions prohibit the driver from using a cellular telephone while driving. Whether or not prohibited by law, for safety reasons, the driver should not use the cellu-
lar telephone while the vehicle is in motion. Stop the vehicle in a safe location before placing or answering a call. If you nonetheless choose to use the tele-
phone1 while driving, please use the hands-
free feature and be sure to pay attention to the traffic situation at all times. Use the tele-
phone only when road, weather and traffic conditions permit. Otherwise, you may not be able to observe traffic conditions and could endanger yourself and others. Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is covering a distance of 44 feet (approxima-
tely 14 m) every second. 1 Observe all legal requirements. Controls in detail Audio system Warning!
G Never operate radio transmitters equipped with a built-in or attached antenna (i.e. with-
out being connected to an external antenna) from inside the vehicle while the engine is running. Doing so could lead to a malfunc-
tion of the vehicles electronic system, pos-
sibly resulting in an accident and/or personal injury. 219 Controls in detail Audio system TEL Menu Telephone Telefonliste Externe Daten importieren (nur Komfort-Telefonie) Externe Daten lschen Visitenkarten empfangen General notes Making calls with convenience phone or via Bluetooth* interface The audio system offers you a two-stage telephone functionality. If your vehicle is equipped with the conve-
nience phone function, you can purchase and install phone cradles for certain tele-
phones. These telephone cradles can be obtained from an authorized Mercedes-Benz Center. 220 Name Phone book SMS
(only convenience phone*) SMS Anruflisten Mikro aus/Mikro ein Anruflisten In der Aufnahmeschale wird der Akku Ihres Mobiltelefons geladen und eine Verbind-
ung zur Fahrzeugauenantenne hergestellt. In addition to the hands free function, the convenience phone function also offers you the phone book import and text mes-
sage functions, with a suitable telephone. Audio system with CD changer*, the tele-
phone function via the Bluetooth* inter-
face is available in conjunction with a Bluetooth enabled telephone. With a suitable telephone, you can use the hands-free device and receive electronic business cards (vCards) via the Bluetooth* interface. i If the audio system with CD changer* is equipped with the convenience phone function, you can also connect it to a Bluetooth enabled telephone via the Bluetooth interface . The functions of the convenience phone* are not available in this case. Further information on suitable telephones and on connecting Bluetooth enabled telephones to the audio system are avail-
able at an authorized Mercedes-Benz Center. Calls disconnected while the vehicle is in motion Interruptions to the connecting may occur if there is insufficient GSM network cov-
erage in certain regions. you move from one GSM transmit-
ter/receiver area (GSM cell) into an-
other and no channels are free or the cell is full. you are using a SIM card that is not compatible. when using a telephone with "Twin-
card", the telephone is simultaneously logged into the network with the sec-
ond SIM card. Operating options i The components and operating principles of the audio system can be found on ( page 174) and ( page 183). i Various telephone cradles can be installed in the front center armrest, see separate installa-
tion instructions for the telephone cradle. These telephone cradles can be obtained from an au-
thorized Mercedes-Benz Center. For more infor-
mation about telephone ( page 300). When the telephone is inserted in the cra-
dle, you can operate the telephone using the following devices:
buttons s and t and keypad on audio control unit audio controller in center console multifunction steering wheel Please note that these functions are only available with Mercedes-Benz approved telephones. Please contact an authorized Mercedes-Benz Center for information on features available for your telephone of choice. Controls in detail Audio system i In order for the functions described in this section to work correctly, the Bluetooth head-
set must be linked to the audio system
( page 189). Please make sure any Bluetooth headset linked with the telephone is switched off or that the headset is linked with the audio sys-
tem before you insert the telephone in the cradle
( page 300) and use the telephone functions with the audio system. The descriptions in this section assume that the telephone is inserted in the cradle. Exceptions to this are clearly stated. Unless otherwise indicated, the descrip-
tions and illustrations in this section refer to audio system. 221 Controls in detail Audio system Caller ID The audio system can display the tele-
phone number and the name of the caller, e.g. for an incoming call and also in other menus or displays. For the telephone number to be displayed, the caller must transmit their telephone number. This is also the case for name displays. For this, the telephone number and the name of the caller must also be saved in the tele-
phone book. 222 Wenn Sie das Audio system whrend eines aktiven Gesprchs im Freisprech-
modus ausschalten, wird das Gesprch abgebrochen. Dies knnen Sie durch folgende Manahmen verhindern:
Komfort-Telefonie: Vor dem Auss-
chalten des audio systems das Telefon aus der Aufnahmeschale nehmen. Telefonie ber die Bluetooth Schnittstelle: Vor dem Ausschalt-
en des audio systems am Telefon auf "Privatgesprch" ("Private mode") wechseln. Functional restrictions You will not be able to use the telephone, or you may have to wait a while, in the fol-
lowing situations:
If the telephone is not inserted in the cradle. If the telephone is switched off. Wenn die Funktion "Bluetooth" am Au-
dio system oder, bei Telefonie ber die Bluetooth Schnittstelle, am Mobilfunk-
teil ausgeschaltet ist. If the telephone has not yet logged into the network. The telephone automatically tries to log into a network. If no network is available, you will also not be able to make a 911 emergency call. If you attempt to make an outgoing call, the No Service message will appear for a short while. Activating the telephone Activating Bluetooth*
i If the audio system with CD changer* is equipped with the convenience phone function, you can also connect it to a Bluetooth enabled telephone via the Bluetooth interface . This connection remains active until the audio system is next switched off. The functions of the conve-
nience phone* are not available in this case. Switch on the telephone
(see telephone operating instructions). Enter the PIN. Activate Bluetooth connection on the telephone
(see telephone operating instructions) Press button h on the audio control unit to call up the telephone mode. Telephone with Bluetooth interface*
i Wenn Ihr Fahrzeug mit der Komfort-Telefo-
nie ausgestattet ist und Sie ber die Bluetooth Schnittstelle telefonieren wollen, dann sollte Ihr Telefon nicht in der Aufnahmeschale stecken. Je nach Typ des Telefons kann es sonst zu Fehl-
funktionen kommen. Prerequisites for the telephone For making calls using the audio system via the Bluetooth interface*, you will need a Bluetooth enabled telephone. Als Vorbereitung fr die Telefonie ber die Bluetooth Schnittstelle* sollten Sie das Handsfree-Profil Ihres Telefons prfen. Das Telefon muss das Handsfree-Profil 1.0 oder hher untersttzen. i Not all telephones available on the market are comparably suitable. Further information on suitable telephones and on connecting Blue-
tooth enabled telephones to the audio system are available from an authorized Mercedes-Benz Center. Controls in detail Audio system i On certain telephones, not only do you have to activate the Bluetooth function but your own device must additionally be made "visible" for other devices. Each Bluetooth device has a Bluetooth device name. It is recommended to give the device a personal name, by which you can clearly recog-
nize your telephone. i If the Bluetooth function on the audio sys-
tem is enabled, the message Bluetooth not ac-
tivated in system settings appears. Activate Bluetooth connection on the audio system ( page 189). 223 Controls in detail Audio system Registering a telephone (authorizing) When you use your telephone in conjunc-
tion with the audio system for the first time, you must register (authorize) it. It is possible to register serveral tele-
phones. The connection is allways estab-
lished to the last activated telephone in signal range. When you authorize a new telephone, it is activated automatically. You can switch between the authorized telephones. 224 i The duration of the search procedure de-
pends on the number and type of Bluetooth telephones. The search may take a few minutes. i If the telephone list already contains ten au-
thorized devices, you must de-authorize one of the authorized devices. You will then have to switch this device off and start the search again. Otherwise a new device you are looking for will not appear in the list. Falls das Audio system Ihr Telefon nicht findet , ist vielleicht eine externe Autorisierung ntig. Provided you have not switched the audio system off and on again in the mean time, this list appears immediately when you open the telephone list again. Searching for a telephone TEL Telefon Telefonliste Aktualisieren whlen. The audio system searches for suitable Bluetooth telephones within range and enters them in the telephon list. If a convenience telephone is placed in the telephone cradle, this appears at the top of the list and is activated auto-
matically. If there is no convenience telephone provided, the list contains the Bluetooth telephones authorized last. Ein bereits autorisiertes Bluetooth Telefon in Reichweite wird nach der Ak-
tualisierung in der Telefonliste durch folgendes Symbol gekennzeichnet:
<Symbol>
(Wenn das Symbol grau dargestellt wird, wurde das autorisierte Telefon nicht in Bluetooth-Reichweite ge-
funden). Am Audio System knnen Sie den Passkey ber die Ziffer Menleiste im Display oder ber die Telefontastaur in der audio con-
trol Unit. With the audio controller:
Entering passkey: Select the digits in the menu bar one by one, by sliding omp or rotating ymz the audio controler. Press n to confirm each digit. Confirming passkey: Select ?in the menu bar and press n to confirm. Deleting digits: Select ) in the menu bar and briefly press n to delete one digit, or press and hold n to delete all entered digits. Canceling entry: Select Back in the menu bar and press n to confirm. Authorizing a Bluetooth device Select the desired unauthorized device from the telephone list. Select Options Authorize. The input menu for the passkey ap-
pears. i The passkey is any one to sixteen-digit num-
ber which you can set yourself. You must enter the same number in the audio system and also in the device to be authorized. Please also refer to the instructions in the tele-
phone operating guide. i On devices which do not have an input key-
pad (e.g. headsets), the passkey is predeter-
mined. In this case, it is not necessary to enter the number on the device itself. You will usually find the passkey in the operating instructions for the device. Controls in detail Audio system With keypad on audio control unit:
Entering passkey: Press the desired numbers on the keypad. Confirming passkey: Press button s or button l in the au-
dio control unit to confirm. Deleting digits: Briefly press button A in the audio control unit to delete one number, or press and hold button A to delete all entered num-
bers. Press BACK button in the center con-
sole ( page 178). 225 Displaying details on a telephone Select TEL Phone Phone List. Select the telephone from the list. Select Options Details. The details screen for the device is shown in the audio display. To close details screen: Slide qmr or rotate ymz the audio controler. Controls in detail Audio system Entering passkey into the telephone If a Bluetooth connection is established successfully, you will be prompted to enter a code into the telephone (see the operat-
ing instructions for the telephone). Enter the same passkey on the tele-
phone as you did on the audio system. i Gegebenenfalls mssen Sie nach der Pass-
key-Eingabe an Ihrem Telefon noch eine Bestti-
gung eingeben. Kontrollieren Sie das Display Ihres Telefons. Falls im Display des Audio Systems die Meldung Autorisierung fehlgeschlagen erscheint, haben Sie vielleicht die vorgesehene Zeit fr die Au-
torisierung berschritten. Wiederholen Sie den Vorgang. The device is authorized. You can now make calls via the audio system hands-free device using the authorized telephone. External authorization If the audio system cannot find your tele-
phone, this may be due to special security settings on your telephone. In this case, you can check whether, conversely, your telephone can find the audio system. The audio systems Bluetooth device name is MB Bluetooth. Select TEL Phone Phone List Update Options External Authorization. Start Bluetooth search procedure on the telephone (see the operating in-
structions for the telephone). Select the audio system (MB Blue-
tooth). When prompted to do so, enter the passkey on the telephone and then on the audio system. 226 De-authorizing a Bluetooth device Select TEL Phone Phone List. Select authorized device. Select Options De-authorize. A prompt appears asking whether you really want to de-authorize this device. Select Yes or No. If you select Yes, the device will be de-authorized. i If you de-authorize a device which has been authorized in the past and which is not detected in the search, this device will no longer be dis-
played in the device list. Devices which have been authorized in the past but which are not detected in the search are ei-
ther not switched on or not in the vehicle. Controls in detail Audio system Activating another telephone If you have serveral authorized telephones, you can switch between the individual tele-
phones. i Der Wechsel zu einem anderen autorisierten Telefon ist nur mglich, wenn kein Telefonge-
sprch aktiv ist. When you authoress a new telephone, it is automatically activated. Only one tele-
phone can be active at a time. Select TEL Phone Phone List. Select an authorized telephone from the list. Press n to confirm. Das ausgewhlte Telefon wird gesucht und verbunden, wenn es in Bluetooth Reichweite ist und Bluetooth am entsprechenden Gert aktiviert ist. The selected telephone is activated. A dotR in front of the entry, indicates the current active telephone in the phone list. Receiving business cards You can import business cards (vCards) into the address book from external Blue-
tooth devices. Please note the following:
Bluetooth must be activated. i If the Bluetooth function on the audio sys-
tem is switched off, the message Bluetooth not activated in system settings appears. The external device can send vCards via Bluetooth (see the operating in-
structions for the device). The external device in the vehicle is switched on, authorized and activated. To import: Start the data transfer on the external device. Select TEL Phone Receive Business Cards. or If the address book is displayed, select Address Book Receive Business Cards. Press n to confirm. 227 Controls in detail Audio system The audio system imports the data for the business cards and displays the number of business cards received. i The connection between the audio system and a convenience telephone inserted in the telephone cradle is interrupted in this case. To end reception: Press n. or Press BACK button in the center con-
sole ( page 178). 228 Die Balken zeigen die aktuelle Feld-
strke des Mobilfunknetzes fr den Empfang an. Wenn alle Balken gefllt sind, haben Sie optimalen Empfang. Wenn alle Balken leer sind haben Sie sehr schlechten oder keinen Empfang. Hhrersymbols s oder t. Das Hrersymbol zeigt, ob ein Rufauf-
bau oder ein Gesprch aktiv ist, hier:
t - nicht aktiv i SMS in der Menleiste wird grau dargest-
ellt, weil diese Funktion bei der Telefonie ber die Bluetooth-Schnittstelle* nicht zur Verf-
gung steht. Wenn Ihr Fahrzeug nicht mit der Ko-
mfort-Telefonie ausgestattet ist, fehlt der Eintrag ganz. TEL-Basic display (Bluetooth inter-
face*) Press button h on the audio control unit to call up the telephone mode. Wenn das verbundene Telefon funktions-
bereit ist, erscheint folgende Anzeige:
In der Statuszeile sehen Sie folgende Infor-
mationen:
Actual time:
19:09 Bluetooth-Gertename des verbun-
denen Telefons, hier:
blue_mobil Feldstrke des Mobilfunknetzes
<Symbol>
Convenience phone*
To use the convenience phone function you will need a build-in phone cradle and a suitable mobile phone. Telefon verbinden Aufnahmeschale* in die Mittelarm-
lehne einbauen ( page 300). Mobiltelefon in die Aufnahmeschale*
stecken ( page 301). Das Mobiltelefon wird durch das Stecken in die Aufnahmeschale* in der Regel au-
tomatisch eingeschaltet. Falls ntig, Mobiltelefon von Hand ein-
schalten
(see the operating instructions for the mobile phone). Falls die Telefonie ber die Blue-
tooth-Schnittstelle* aktiv ist: TEL Phone Phone List whlen und Convenience phone auswhlen. Sie knnen ber das Audio System aufge-
fordert werden, die PIN einzugeben. Example 1 Insert the mobile phone 2 Connector contact 3 Mobile phone cradle Controls in detail Audio system PIN entry Eingabe ber Menleiste (mit Au-
dio-Controller Tasten) To enter: Slide omp or rotate ymz the audio controler until the required digit is select. Press n to confirm. Repeat the procedure, until you have select all digits for the necessary PIN number. To delete digits: Slide omp or rotate ymz the audio controler to se-
lect ) in the menu bar. Briefly press n. or Briefly press CLR button next to the au-
dio controller. The character to the left of the cursor is deleted. To delete an entire entry:
Slide omp or rotate ymz the audio controler to select ) in the menu bar. 229 Controls in detail Audio system Press and hold n. or Press and hold CLR button next to the audio controller until the entire entry has been deleted. Entering via audio control unit To enter: Enter all the digits for the PIN number on the numeric keypad, one af-
ter the other. To delete digits: Briefly press To confirm PIN: Slide omp or rotate ymz the audio controler to se-
lect d in the menu bar. Press n. The audio system checks the PIN. If the entry is correct, the phone main menu appears. button A. To delete an entire entry: Press and hold button A until the entire entry has been deleted. To confirm PIN: Press button s. The audio system checks the PIN. If the entry is correct, the phone main menu appears. Unlock code Some mobile phones can be protected from unauthorized use by means of an un-
lock code (see the operating instructions for the mobile phone). The phone functions cannot be used until the unlock code has been entered. Proceed as for entering the PIN. 230 TEL-Basic display (Convenience phone*) The TEL basic display appears after the correct PIN has been entered and con-
firmed. Press button h on the audio control unit to call up the telephone mode. Wenn das Mobiltelefon funktionsbereit und in die Aufnahmeschale* gesteckt ist, erscheint folgende Anzeige:
In der Statuszeile sehen Sie folgende Infor-
mationen:
Actual time:
19:09 Name des Netzanbieters, hier:
T-Mobile Controls in detail Audio system Briefsymbol:
qoder v Das Briefsymbol q wird angezeigt, wenn eine ungelesene SMS vorhanden ist. Das Symbol verschwindet, wenn Sie die SMS gelesen haben. Das Briefsymbol vwird angezeigt, wenn der SMS-Speicher voll ist. Das Symbol verschwindet, wenn Sie mind-
estens eine SMS lschen. Feldstrke des Mobilfunknetzes
<Symbol>
Die Balken zeigen die aktuelle Feld-
strke des Mobilfunknetzes fr den Empfang an. Wenn alle Balken gefllt sind, haben Sie optimalen Empfang. Wenn alle Balken leer sind haben Sie sehr schlechten oder keinen Empfang. Hhrersymbols s oder t. Das Hrersymbol zeigt, ob ein Rufauf-
bau oder ein Gesprch aktiv ist, hier:
t - nicht aktiv Wechsel zischen Bluetooth- und Komfort-Telefonie Wenn Ihr Fahrzeug mit der Komfort-Telfo-
nie* und Bluetooth-Schnittstelle*(audio system with CD changer*) ausgestattet ist, knnen Sie wahlweise beide Telfonie-Arten nutzen. Telefonie-Art im Betrieb wechseln Im Betrieb wechseln Sie von einer Telefo-
nie-Art in die andere, indem Sie ein an-
deres Mobiltelefon verbinden. Telefonie-Art beim Einschalten wechseln. Standardmig verhlt sich das Audio Sys-
tem nach dem Einschalten wie folgt:
Aufnahmeschale* fr Mobiltelefon ist eingebaut Das Audio-System startet die Kom-
fort-Telefonie*. Wenn kein Mobiltelefon in der Aufnahmeschale* steckt, erscheint die Meldung Kein Telefon gesteckt. Wenn ein Mobiltelefon in der Aufnahmeschale*
steckt, erscheint die PIN-Abfrage oder das TEL-Grundmen der Komfort-Telefonie. Aufnahmeschale* fr Mobiltelefon ist nicht eingebaut Das Audio System starte die Telefonie ber die Bluetooth-Schnittstelle* und sucht nach den beiden zuletzt ber die Bluetooth-Schnittstelle* verbundenen Mobiltelefonen. Wenn eines der beiden Mobiltelefone gefunden wird erscheint das TEL-Grundmen der Bluetooth-Telefonie. Wenn keines der beiden Mobiltelefone ge-
funden wird, bleibt die Meldung Bereit fr Bluetooth-Telefonie... auf dem Display stehen. Sie mssen nun Ihr Mobiltelefon anmelden. i Die Verbindung bleibt bis zum nchsten ausschalten des Audio Systems aktiv, wenn Sie nicht ber die Telefonliste ein anderes Mobiltele-
fon verbinden. Es stehen Ihnen whrend der Verbindung nur die Funktionen der Bluetooth-Schnittstelle* zur Verfgung 231 Controls in detail Audio system Setting transmit and receive volume Die folgenden Informationen gelten fr die Telefonie ber die Bluetooth-Schnitts-
telle* und fr die Komfort-Telefonie. i These settings should normally not be changed as the factory settings are matched to most mobile phones. Find out about the opti-
mum settings for your mobile phone at an autho-
rized Mercedes-Benz Center. i Changes may result in significant impair-
ments to the transmission quality. These set-
tings may not be changed during an active phone call. Select TEL Phone Phone List. Select an mobile phone from the list. Select Options Reception Vol-
ume or Transmission Volume. To set the volume: Slide qmr or rotate ymz the audio controler. The volume bar moves up or down. To confirm selection: Press n or slide om the audio controler. 911 emergency call i The 911 emergency call system is a public service. Using it without due cause is a criminal offense. i This function places a call to the local 911 provider. It does not initiate a Tele Aid call. The following describes how to dial a 911 emergency call using the audio system head unit when a Mercedes-Benz specified mobile phone* is inserted in the phone cradle*. Unless otherwise specified, the descriptions refer to the audio system head unit. Consult the separate telephone operating instructions that came with your mobile phone* for information on how to place a 911 emergency call on the mobile phone*. The following conditions must be met for a 911 emergency call:
Telephone must be switched on. The corresponding mobile communica-
tions network must be available. i Emergency calls may not be possible with all telephone networks or if certain network servic-
es and/or telephone functions are active. Check with your local service providers. If you cannot make an emergency call, you will have to initiate rescue measures your-
self. GSM network phones Placing a 911 emergency call using audio control unit with the phone locked Press h button to switch to tele-
phone mode. PIN? appears in the audio display. Enter 911 using the number keypad on the audio control unit. Press s button. or Press n for dialing to begin. DIALING appears in the audio display while the telephone establishes the connection. 232 Wait until the emergency call center TDMA/CDMA network phones answers, then describe the emergency. Placing a 911 emergency call using audio control unit with the phone locked Press h button to switch to tele-
phone mode. CODE? appears in the audio display. Enter 911 using the number keypad on the audio control unit. Press s button. or Press n for dialing to begin. DIALING appears in the audio display while the telephone establishes the connection. Wait until the emergency call center answers, then describe the emergency. Placing a 911 emergency call using audio control unit with the phone un-
locked Press h button to switch to tele-
phone mode. Enter 911 using the number keypad on the audio control unit. Press s button. or Press n for dialing to begin. DIALING appears in the audio display while the telephone establishes the connection. Wait until the emergency call center answers, then describe the emergency. i If no SIM card is in the mobile phone, NO SERVICE appears in the audio display. In that case, you only can make an emergency call on the mobile phone itself, without the use of the audio control unit. Controls in detail Audio system Placing a 911 emergency call using audio control unit with the phone un-
locked Press h button to switch to tele-
phone mode. Enter 911 using the number keypad on the audio control unit. Press s button. or Press n for dialing to begin. DIALING appears in the audio display while the telephone establishes the connection. Wait until the emergency call center answers, then describe the emergency. 233 Controls in detail Audio system Phone book Im Telefonbuch des Audio Systems knnen Sie Rufnummern speichern. Es gibt fr jede Telefonie-Art eine Mglichkeit, das Telefonbuch zu fllen:
Komfort-Tlefonie*: Telefonbuch des Mobiltelefons bernehmen (externe Daten importieren) Bluetooth-Schnittstelle*: Visiten-
karten (vCards) bernehmen. i These important entries are retained even if you use the audio system with another mobile phone. You should delete these entries before handing over or selling your vehicle. 234 Importing external data (Convenience phone*) Sie knnen das Telfonbuch aus Ihrem Mo-
biltelefon in das Telefonbuch des Audio Systems importieren. i Je nach verwendetem Mobiltelefon werden bei dieser Funktion nur die Telefonbucheintrge des Mobiltelefons oder auch die Telefonbuchein-
trge der SIM-Karte importiert. Select TEL Phone Import Exter-
nal Data. Hinzufgen oder berschreiben whlen. The audio system will import the exter-
nal data into the phone book. Die Meldung Import erfolgreich wird an-
gezeigt wenn die Daten importiert wurden. i Den Menpunkt berschreiben knnen Sie nur whlen, wenn das Telefonbuch bereits Daten enthlt. Falls Sie den Menpunkt Hin-
zufgen whlen und das Telefonbuch schon zu viele Daten enthlt, erscheint die Meldung Spe-
icher voll. Visitenkarten (vCards) empfangen (nur Bluetooth-Schnittstelle*) Sie knnen Visitenkarten (vCards) von ex-
ternen Bluetooth-Telefonen in das Telefon-
buch Ihres Audio Systems importieren. Beachten Sie hierzu folgendes:
Bluetooth ist am Audio System mit CD-Wechsler* und am externen Blue-
tooth-Telefon (siehe Betriebsanleitung fr das Mobiltelefon) aktiviert. Das externe Bluetooth-Telefon kann vCards per Bluetooth senden
(siehe Betriebsanleitung fr das Mo-
biltelefon). Das externe Bluetooth-Telefon im Fahr-
zeug ist eingeschaltet und autorisiert. i Falls Sie whrend des Empfangs von vCards in eine andere Betriebsart wechseln (z.B. auf die Taste RADIO drcken), wird der Empfang von vCards abgebrochen. Select TEL Phone Reveive Business Cards. Select Yes or No. If you select Yes all external data are then deleted from the phone book. i Business cards (vCards) will not be deleted.. Opening the phone book Select TEL Name. Wenn das Telefonbuch Eintrge en-
thlt, werden sie alphabetisch sortiert angezeigt. Im unteren Teil der Display-
anzeige wir der Suchspeller eingeblen-
det und ist aktiv. Der Suchspeller dient dazu, bentigte Eingaben zu reduzieren. Die Bluetooth-Verbindung zwischen dem Audio System und Ihrem aktiven Mobiltelefon wird unterbrochen. Dafr ist das Audio System bereit, vCards von einem anderen Mobiltelefon zu empfangen. Am externen Bluetooth-Telefon die Datenbertragung starten (siehe Betriebsanleitung fr das Mobiltele-
fon). Die Daten der vCards werden automa-
tisch in das Telefonbuch bernommen. Die Anzahl empfangener Visitenkarten wird angezeigt. Zurck whlen oder in eine andere Betriebsart wechseln, um den Empfang abzubrechen. Deleting external Data (Convenience phone*) Select TEL Phone Delete Exter-
nal Data. Es erscheint eine Abfrage, ob die Daten gelscht werden sollen. Controls in detail Audio system Switching from the search speller to the list: Slide qm repeatedly or press and hold n until the search speller is hidden. or Select d. Switching from the list to the search speller: Select Back from the list. or Press BACK button Selecting an entry Selecting via search speller Switch if necessary from the list to the search speller. To change the search speller lan-
guage: Select !. Die gewnschte Sprache whlen. To switch search speller character set: Select #. 235 Controls in detail Audio system Depending on the previous setting, this switches it to letters with special char-
acters or numbers with special charac-
ters To enter characters: Slide omp or rotate ymz the audio controler to se-
lect the characters for the required en-
try. Mit dem ersten Zeichen bestimmen Sie den Anfangsbuchstaben des gesucht-
en Eintrags. Press n to confirm. In der Liste wird der erste Eintrag mit dem gewhlten Anfangsbuchstaben hervorgehoben. Bei hnlichen Eintr-
gen wird Ihnen das nchste unter-
schiedliche Zeichen angezeigt. Example:
Im Beispiel sind die Namensanfnge Christel und Christine gleich. Das erste unterschiedliche Zeichen ist das E bzw. I. Deshalb werden E und I zur Auswahl angeboten. 236 To delete an entire entry:
Select ) and press and hold n until the entire entry has been deleted. or Press and hold CLR until the entire en-
try has been deleted. Select the characters for the required Ending search: Switch from the entry one after another. Sobald die Auswahl eindeutig ist, wech-
selt das Audio System automatisch in die Liste. To delete an individual character:
Select ) and briefly press n. or Press CLR button next to the audio controller. After entering each character or after each deletion of a character, the clos-
est matching entry is given at the top of the list. search speller to the list. The top list entry is highlighted auto-
matically. Selecting via list Switch if necessary from the search speller to the list. Slide qmr or rotate ymz the audio controler until the desired entry is high-
lighted. Press n to confirm. Initiating call to an entry Press button s on audio control unit. Controls in detail Audio system Displaying details on an entry The audio system can also fully display an abbreviated entry. Select entry. Slide mp to select Options. Press n to confirm. Select Details. Displaying details on an entry The audio system can also fully display an abbreviated entry. Select entry. Slide mp to select Options. Press n to confirm. Select Details. A screen with the details of the select-
ed entry appears. A screen with the details of the select-
ed entry appears. To close details screen: Slide qmr, To close details screen: Slide qmr, or omp, or rotate ymz. or omp, or rotate ymz. Deleting entry Select entry Slide mp to select Options. Press n to confirm. Select Delete. You will be prompted to confirm that you really want to delete the entry. Select Yes or No. If you select Yes the actual entry is deleted from the phone book. 237 Controls in detail Audio system Call lists The audio system displays the calls re-
ceived (including missed calls) or made during phone mode in their own lists. i The particular menu item can only be select-
ed if calls have allready been received or made from audio system. The display of missed calls in the audio system display is not possible with all mobil phones. The control system displays the list of Dialed numbers in the multifunction display. i Die Anruflisten des Audio Systems sind nicht synchron mit den Anruflisten Ihres Mo-
biltelefons. Wenn Sie einen Anruf ber Ihr Mo-
biltelefon initiieren und nur die Freisprecheinrichtung des Audio Systems nutzen, dann werden diese Anrufe nicht aufge-
listet. Calling up the list Select TEL Call Lists. Select Calls Received or Calls Di-
aled. The appropriate list appears. 238 or In the phone main menu press s The Calls Dialed list appears. Example i If there is a symbol in front of the phone number or the name, then you have missed this call. Slide qmr or rotate ymz the audio controler until the desired entry is high-
lighted. Initiating call: Press button n oder s. To close the lists: Slide qmr, or omp, or rotate ymz. Deleting call lists i The saved call lists are retained in the audio system, even if you use the audio system with another mobil phone. For this reason you should delete any call lists before handing over or sell-
ing the vehicle. In the phone main menu select Call Lists. Select Delete Call Lists. Press n to confirm. Both lists are deleted. Making calls Initiating an outgoing call Press button h on the audio control unit to call up the telephone mode. Wenn das Mobiltelefon funktionsbereit ist, erscheint folgende Anzeige (Beispiel Kom-
fort-Telefonie):
Entering phone number via the audio control unit Mit der Telefontastatur knnen Sie Ziffern und Sonderzeichen eingeben. Eingeben: Mit den Tasten 0 bis 9, #
und * die Zeichen eingeben. Das * erreichen Sie durch einmaliges Drcken der Taste >. Das Zeichen +
erreichen Sie durch erneutes Drcken der Taste > innerhalb von etwa 1.5 Sekunden nach dem ersten Drcken. To delete individual digits: Briefly press button A. To delete an entire entry: Press and hold button A until the entire entry has been deleted. or Press button t. To confirm PIN: Press button s. Controls in detail Audio system Entering phone number via the audio controller Im Telefon-Grundmen wird zustzlich zur eigentlichen Menleiste eine weitere Leiste mit Ziffern angezeigt, das Ziffern-
men. Wenn die Leiste aktiv (hell unterlegt) ist, knnen Sie Elemente auswhlen. To enter digits: Slide omp or rotate ymz the audio controler to se-
lect the required digit. Press n to confirm. Repeat the procedure, until you have select all digits for the necessary phone number. 239 Controls in detail Audio system To delete individual digits:
Slide omp or rotate ymz to select ) and briefly press n. or Press CLR button next to the audio controller. To delete entire phone number:
Slide omp or rotate ymz to select ), press and hold n until the phone num-
ber has been deleted. or Press and hold CLR until the entire en-
try has been deleted. or Press button t. To initiate a call: Slide omp or rotate ymz the audio controler to se-
lect _. Press n to confirm. or Press button s. 240 Initiating a call to a phone book entry Select TEL Name. Select entry ( page 235). Press button s or n. Initiating a call to a call list entry Select TEL Call Lists. Select Calls Received or Calls Di-
aled. The appropriate list appears. Select entry ( page 238). Press button s or n. Redialing i Vorraussetzung fr die Nutzung der Wahl-
wiederholung ist, das keine Ziffern eingegeben worden sind. Press button s. or Select S and press button n. The dialed calls list appears. The call di-
aled last will be at the top of the list. To select a call: Slide qmr or rotate ymz the audio controler until the desired entry is highlighted. Initiating call: Press button n or s. Whlvorgang abbrechen oder aktives Gesprch beenden Select TEL 4. or Press button t on the audio control unit. Rejecting or accepting calls Bei einem ankommenden Ruf hren Sie den Rufton und sehen im Display, dass ein Ruf ankommt. i Je nach Mobiltelefon kann sich der Rufton des Audio Systems vom eingestellten Rufton des Mobiltelefons unterscheiden. Es kann der am Mobiltelefon eingestellte Rufton ertnen. der durch das Audio System vorgegebene Rufton ertnen. der durch das Audio System vorgegebene Rufton und der am Mobiltelefon eingestellte Rufton ertnen. Wenn Name und Nummer des Anrufers im Telefonbuch des Audio Systems gespe-
ichert sind und der Anrufer die Rufnum-
merbertragung zulsst, werden Name und Nummer angezeigt. Ansonsten er-
scheint folgende Anzeige:
To accept: Press button s on audio control unit. or Press n on the audio controller. To reject: Press button t on audio control unit. or Slide om or rotate ymz the audio con-
troler to select Reject, and press n on the audio controller to confirm. The call is rejected. Controls in detail Audio system If you have accepted the call using the au-
dio control unit, audio controller, the multi-
function steering wheel or the mobile phone, the call will be conducted via the hands-free system. The volume of the call can be adjusted ( page 185). If you have accepted the call using the Bluetooth headset, the call will be con-
ducted via the headset. Further operating functions can be found in the Functions during a single-call sec-
tion ( page 242). You can also accept a call if the audio dis-
play is showing a screen other than the telephone mode screen. After accepting the call, the display switches to the phone display. Once the call is over, the display for the previous mode will appear again. 241 Controls in detail Audio system Functions during a single call To switch on: Select Mic On. Rejecting or accepting call waiting Switching hands-free microphone on or off Wenn Sie telefonieren, ndert sich die Menleiste. Anstelle des Menpunkts An-
ruflisten steht Mikro aus bzw. Mikro ein in der Menleiste. To switch off: Select Mic Off. Es erscheint kurzzeitig die Meldung:
Das Mikrofon wurde ausgeschaltet. When the microphone is switched off the symbol > appears in the main ar-
ea. Es erscheint kurzzeitig die Meldung:
Das Mikrofon wurde eingeschaltet. The microphone is switched on and the symbol > disappears in the main area. i The call waiting function must be supported and activated by the phone provider. If you are conducting a single call and you receive another call, the call waiting dis-
play will appear. A signal tone will also sound. To accept: Press button s on audio control unit. or Press n on the audio controller. To reject: Press button t on audio control unit. or 242 Controls in detail Audio system Transmitting phone book entry as a sequence of characters: Select Name. Select the desired phone book entry. The entry is transmitted immediately as a sequence of characters. To switch back to call display: Select Back. Slide om or rotate ymz the audio con-
troler to select Reject, and press n on the audio controller to confirm. This ends the previous call. i The previous call is ended if call waiting is accepted using the audio control unit, audio con-
troller or multifunction steering wheel. If you accept call waiting with the mobile phone, the previous call is put on hold. You the have two calls, the accepted call is the active call. Sending DTMF tones i This function is not possible with all mobile phones. Answering machines or other devices can be controlled via DTMF tones, e.g. for re-
mote query functions. To transmit individual characters:
During a call select the required char-
acters. or Press the corresponding button on the audio control unit. Every selected character is transmitted immediately. 243 Controls in detail Audio system SMS messages
(Short Message Service) The following functions are available:
Receiving text messages. Reading text messages. Organizing text messages. The following requirements must be met in order to use this functions:
The mobile phone has been plugged into the cradle and switched on. The PIN has been entered. The mobile phone has been logged into a mobile phone network. Beim Verbinden des Mobiltelefons werden von den SMS-Nachrichten, die aktuell im Mobiltelefon gespeichert sind, die 30 neuesten in den SMS-Eingang des Audio Systems geladen und angezeigt. Whrend das Mobiltelefon ber die Aufnahmeschale* mit dem Audio System verbunden ist, werden neu eingehende 244 SMS-Nachrichten im SMS-Eingang des Au-
dio Systems angezeigt. Zustzlich ertnt ein akustisches Signal und es erscheint ein Briefsymbol in der Statuszeile. Opening text messages Select TEL SMS. Der SMS-Eingang erscheint. Ungele-
sene SMS werden durch das Briefsym-
bol q gekennzeichnet. You can switch between the sender display for the text message and the text display. The text display shows the first words of the text. To switch to text display: Select Op-
tions Display Text. The appropriate message list appears. To switch to sender display: Select Options Display Sender. The appropriate message list appears. If the sender is saved in the phone book, the sender display will indicate the name. If the sender is not saved in the phone book, the phone number is displayed. Selecting a text message:
Slide qmr or rotate ymz the audio controler until the desired text mes-
sage in the list is selected. Displaying details The audio system can also fully display an abbreviated sender display Select the desired text message. Select Options Details. The details screen appears. To close details screen: Slide omp or rotate ymz the audio controler. Reading text message Select TEL SMS. Der SMS-Eingang erscheint. Ungele-
sene SMS werden durch das Briefsym-
bol q gekennzeichnet. Select a text message from the list. Press n to confirm. The text message is displayed. To scroll through display or select phone numbers in the text:
Slide qmr or rotate ymz. The display scrolls down or up line by line or skips to the next or previous phone number and highlights it auto-
matically. Back to the list: Press n and select Back. Using phone numbers in the text i The function assumes that the text message contains phone numbers in the text. When the text message is displayed se-
lect a usable element. Press n and select Use. Select Call. The phone initiates the call. Calling text message sender i The function assumes that the text message contains phone numbers in the text. When the text message is displayed press n and select Call Sender. The phone initiates the call to the send-
er. Deleting a text message Wenn in der Statuszeile das Symbol er-
scheint, ist der SMS-Speicher voll. Um neue SMS-Nachrichten empfangen zu kn-
nen, mssen Sie alte SMS-Nachrichten lschen. Controls in detail Audio system i Im Standardfall wird mit dieser Funktion eine SMS im audio system und im Mobiltelefon gelscht. Manche Mobiltelefone untersttzen diese Funktion nicht. Dann wird mit dieser Funk-
tion nur die SMS im Audio System gelscht. Select TEL SMS. Der SMS-Eingang erscheint. Ungele-
sene SMS werden durch das Briefsym-
bol q gekennzeichnet. Select a text message from the list. Press n to confirm. The text message is displayed. Select Options Delete. A delete prompt appears. Select Yes or No. The text message is deleted or retained on the basis of the selection. 245 Controls in detail Useful features Telephone*
Warning!
G Never operate radio transmitters equipped with a built-in or attached antenna (i.e. with-
out being connected to an external antenna) from inside the vehicle while the engine is running. Doing so could lead to a malfunc-
tion of the vehicles electronic system, pos-
sibly resulting in an accident and/or serious personal injury. Radio transmitters, such as a portable tele-
phone or a citizens band unit, should only be used inside the vehicle if they are con-
nected to an antenna that is installed on the outside of the vehicle. The external antenna must be approved by Mercedes-Benz. Please contact an autho-
rized Mercedes-Benz Center for informa-
tion on the installation of an approved external antenna. Refer to the radio trans-
mitter operation instructions regarding use of an external antenna. 300 Warning!
G Please do not forget that your primary re-
sponsibility is to drive the vehicle. A drivers attention to the road must always be his/her primary focus when driving. For your safety and the safety of others, we rec-
ommend that you pull over to a safe location and stop before placing or taking a tele-
phone call. If you choose to use the telephone1 while driving, please use the hands-free device and only use the telephone when road, weather and traffic conditions permit. Some jurisdictions prohibit the driver from using a mobile telephone while driving a vehicle. Only operate the COMAND* (Cockpit Man-
agement and Data System)1 if road, weather and traffic conditions permit. 1 Observe all legal requirements. Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is covering a distance of 44 feet (approximate-
ly 14 m) every second. i Various telephone cradles can be installed in the front center armrest, see separate installa-
tion instructions for the telephone cradle. These telephone cradles can be obtained from an au-
thorized Mercedes-Benz Center. The functions and services available to you while using the telephone depend on your service pro-
vider and the type of telephone you are using. See also separate operating manual for instruc-
tions on how to use your telephone. When the telephone is inserted in the cra-
dle, you can operate the telephone using the following devices:
mobile phone keypad audio system ( page 239) COMAND* (see separate operating in-
structions) buttons s and t on the multi-
function steering wheel ( page 148) Voice Control* (see separate operating instructions) Bluetooth (audio system with CD changer) ( page 223) Please note that these functions are only available with Mercedes-Benz approved telephones. Please contact an authorized Mercedes-Benz Center for information on features available for your telephone of choice. Open telephone compartment
( page 290). Inserting telephone in telephone cradle Once the telephone has been inserted in the telephone cradle, you have to use the hands-free device or Bluetooth* headset to respond during phone calls.
! Do not try to remove the telephone along with the cradle. You could otherwise damage the telephone cradle. If applicable, remove the cover for the external antenna connection from the back of the telephone and store it in a safe place. Be sure to comply with the telephones operating instructions, as well. Example illustration 1 Insert the telephone 2 Connector contact 3 Telephone cradle Slide the lower end of the telephone into connector contact 2 on cradle 3. Controls in detail Useful features Push the top of the telephone in direc-
tion of arrow 1, until the lug on the telephone release button engages. The telephone is connected to the net-
work via the external antenna. The telephone is linked to the hands-free device and the multifunc-
tion steering wheel. The battery is charged depending on its charge status and the position of the SmartKey in the starter switch. The charge procedure will be indicated in the telephones display. You can place or receive phone calls. You can control other functions of the tele-
phone via the control system
( page 157), or audio system
( page 219), Voice Control*, or CO-
MAND* (see separate operating instruc-
tions). i Wenn Sie den Schlssel aus dem Zndschloss ziehen, bleibt das Mobiltelefon eingeschaltet, aber Sie knnen nicht mehr ber die Freisprecheinrichtung telefonieren. 301 Controls in detail Useful features Falls Sie telefonieren und den Schlssel aus dem Zndschloss abziehen mchten, sollten Sie das Mobiltelefon vorher aus der Mobiltele-
fon-Aufnahme entnehmen, da der Anruf sonst beendet wird. i When you take the SmartKey or SmartKey with KEYLESS-GO* out of the starter switch, the telephone remains switched on for approximate-
ly 10 minutes. If you place or receive a call during this time, the telephone switches off 10 minutes after the call has been completed. 302 Removing telephone from telephone cradle Changing telephone cradle If you require a different cradle for your telephone, remove the present cradle be-
fore installing a new one. Removing an existing telephone cradle Example illustration 1 Release catch for telephone 2 Telephone cradle i When using a flip-style telephone, open flip top before removing from the cradle while a call is connected. Otherwise, the call will be discon-
nected. Press release catch in direction of arrow 1 and take telephone out of telephone cradle 2. Example illustration 1 To release the telephone cradle 2 To remove the telephone cradle 3 Telephone cradle Press release button in direction of arrow 1 and take telephone cradle 3 out in direction of arrow 2. Installing a different telephone cradle Tele Aid
! The initial activation of the Tele Aid system may only be performed by completing the sub-
scriber agreement and placing an acquaintance call using the Information button . Failure to complete either of these steps will result in a system that is not activated. If you have any questions regarding activation, please call the Response Center at 1-800-756-9018 (in the USA) or 1-888-923-8367 (in Canada). The Tele Aid system
(Telematic Alarm Identification on De-
mand) The Tele Aid system consists of three types of response:
automatic and manual emergency Roadside Assistance, and information Example illustration 1 Contact plate 2 Recesses 3 Telephone cradle Insert telephone cradle 3 into recesses 2 of contact plate 1. Push telephone cradle 3 forward until it engages. Controls in detail Useful features The Tele Aid system is operational provid-
ing that the vehicles battery is charged, properly connected, not damaged and telephone phone and GPS coverage are available. i The Tele Aid system utilizes the telephone network for communication and the GPS (Global Positioning System) satellites for vehicle loca-
tion. If either of these signals are unavailable, the Tele Aid system may not function and if this oc-
curs, assistance must be summoned by other means. The speaker volume of a Tele Aid call can be adjusted when using the volume control on the multifunction steering wheel. To raise, press button and to lower, press button or use the audio system rotary control button ( page 185). To activate, press the SOS button, the Roadside Assistance button or the Information button , depend-
ing on the type of response required. 303 Controls in detail Useful features i The SOS button, the Roadside Assistance button , and the Information button are located in the overhead control panel
( page 31). Shortly after the completion of your Tele Aid acquaintance call, you will receive a user ID and password. By visiting www.mbusa.com and selecting Tele Aid
(USA only), you will have access to account information, remote door unlock and more. System self-check Initially, after switching on the ignition, malfunctions are detected and indicated. If a malfunction is detected, the indicator lamps in the SOS button, the Roadside As-
sistance button and the Information button stay on longer than 10 seconds or do not come on. The mes-
sage Tele Aid not activated or Tele Aid inoperative appears in the multifunction display. 304 Warning!
G If the indicator lamps in the SOS button, in the Roadside Assistance button and/or in the Information button do not come on during the system self-check, or if any of these indicators remain illuminat-
ed continuously in red and/or the message Tele Aid not activated or Tele Aid inopera-
tive is displayed in the multifunction display after the system self-check, a malfunction in the system has been detected. If a malfunction is indicated as outlined above, the system may not operate as ex-
pected. Have the system checked at the nearest Mercedes-Benz Center as soon as possible. Emergency calls An emergency call is initiated automatically following an accident in which the emergency tensioning devices
(ETDs) or air bags deploy. An emergency call can also be initiated manually by opening the cover next to the interior rear view mirror labeled SOS, then briefly pressing the button located under the cover. For instructions on initiating an emergency call manually ( page 306). Once the emergency call is in progress, the indicator lamp in the SOS button will begin to flash. The message:
Connecting call appears in the multi-
function display and the audio system is muted. When the connection is established, the message:
Call connected appears in the multi-
function display The Tele Aid system is available if it has been activated and is operation-
al. Activation requires a subscription for monitoring services, connection, and cellular air time the relevant cellular phone network and GPS signals are available and pass the information on to the Response Center there is sufficient voltage in the vehicle batteries i Location of the vehicle on a map is only pos-
sible if the vehicle is able to receive signals from the GPS satellite network and pass the informa-
tion on to the Response Center. All information relevant to the emergency, such as the location of the vehicle (deter-
mined by the GPS satellite location sys-
tem), vehicle model, identification number and color are generated. i During the emergency call message Emer-
gency Call Activated is displayed, operation from audio system or COMAND* is not possible. The automatic climate control can be still adjust-
ed using the switches on the climate control panel. A voice connection between the Response Center and the occupants of the vehicle will be established automatically soon af-
ter the emergency call has been initiated. The Response Center will attempt to deter-
mine more precisely the nature of the acci-
dent provided they can speak to an occupant of the vehicle. i If no vehicle occupant responds, an ambu-
lance will be sent to the vehicle immediately. Controls in detail Useful features Warning!
G If the indicator lamp in the SOS button is flashing continuously and there was no voice connection to the Response Center established, then the Tele Aid system could not initiate an emergency call (e.g. the rele-
vant telephone network is not available). The message Call failed appears in the multifunction display for approximately 10 seconds. Should this occur, assistance must be sum-
moned by other means. i During the emergency call the telephone is switched off automatically and must be switched back on to make a call. i The 911 emergency call system is a public service. Using it without due cause is a criminal offense. 305 Briefly press button on cover 2 to open. Cover 2 will open. Press SOS button 1 (for longer than 2 seconds). The indicator lamp in SOS button 1 will flash until the emergency call is concluded. Wait for a voice connection to the Response Center. Close cover 2 after the emergency call is concluded. Warning!
G If you feel at any way in jeopardy when in the vehicle (e.g. smoke or fire in the vehicle, ve-
hicle in a dangerous road location), please do not wait for voice contact after you have pressed the emergency button. Carefully leave the vehicle and move to a safe loca-
tion. The Response Center will automatically contact local emergency officials with the vehicles approximate location if they receive an automatic SOS signal and cannot make voice contact with the vehicle occupants. Controls in detail Useful features Initiating an emergency call manually Beauftragt !
1 SOS button 2 Cover 306 Roadside Assistance button The Roadside Assistance button is located in the overhead control panel. Beauftragt !
1 Roadside Assistance button Press and hold Roadside Assistance button (for longer than 2 seconds). A call to a Mercedes-Benz Roadside As-
sistance dispatcher will be initiated. The button will flash while the call is in progress. The message:
Connecting call appears in the multifunction display and the audio system is muted. When the connection is established, the message:
Call connected appears in the multi-
function display The Tele Aid system will transmit data gen-
erating the vehicle identification number, model, color and location (subject to avail-
ability of cellular and GPS signals). A voice connection between the Roadside Assistance dispatcher and the occupants of the vehicle will be established. Describe the nature of the need for as-
sistance. The Mercedes-Benz Roadside Assistance dispatcher will either dispatch a qualified Mercedes-Benz technician or arrange to tow your vehicle to the nearest authorized Mercedes-Benz Center. For services such as labor and/or towing, charges may ap-
ply. Refer to the Roadside Assistance Man-
ual for more information. These programs are only available in the USA:
Controls in detail Useful features Sign and Drive services: Services such as jump start, a few gallons of fuel or the replacement of a flat tire with the vehicle spare tire are obtainable. i The indicator lamp in the Roadside Assis-
tance button remains illuminated in red for approximately 10 seconds during the system self-check after switching on the ignition (togeth-
er with the SOS button and the Information button ). See system self-check ( page 304) if the indi-
cator lamp does not come on in red or stays on longer than approximately 10 seconds. If the indicator lamp in the Roadside Assistance button is flashing continuously and no voice connection to the Response Center was established, the Tele Aid system could not ini-
tiate a Roadside Assistance call (e.g. the relevant telephone network is not available). The mes-
sage:
Call failed appears in the multifunction dis-
play for approximately 10 seconds Roadside Assistance calls can be terminated us-
ing the t button on the multifunction steer-
ing wheel or the respective button for ending a telephone call on the audio system or the COMAND* head unit. 307 Controls in detail Useful features Information button The Information button is located in the overhead control panel. Beauftragt !
1 Information button Press and hold Information button
(for longer than 2 seconds). A call to the Customer Assistance Cen-
ter will be initiated. The button will flash while the call is in progress. The message:
Connecting call appears in the multifunction display and the audio system is muted. 308 When the connection is established, the message:
Call connected appears in the multi-
function display The Tele Aid system will transmit data gen-
erating the vehicle identification number, model, color and location (subject to avail-
ability of cellular and GPS signals). A voice connection between the Customer Assistance Center representative and the occupants of the vehicle will be estab-
lished. Information regarding the operation of your vehicle, the nearest authorized Mercedes-Benz Center or Mercedes-Benz USA products and services is available to you. For more details concerning the Tele Aid system, please visit www.mbusa.com and use your ID and password (sent to you sep-
arately) to learn more (USA only). i The indicator lamp on the Information button remains illuminated in red for ap-
proximately 10 seconds during the system self-check after switching on the ignition (togeth-
er with the SOS button and the Roadside Assis-
tance button ). See system self-check ( page 304) if the indi-
cator lamp does not come on in red or stays on longer than approximately 10 seconds. If the indicator lamp in the Information button is flashing continuously and no voice connection to the Response Center was established, then the Tele Aid system could not initiate an Information call (e.g. the relevant tele-
phone network is not available). The message:
Call failed appears in the multifunction dis-
play for approximately 10 seconds Information calls can be terminated using the t button on the multifunction steering wheel or the respective button for ending a telephone call on the audio system or the COMAND* head unit. Controls in detail Useful features
! If the indicator lamps do not start flashing after pressing one of the buttons or remain illu-
minated (in red) at any time, the Tele Aid system has detected a fault or the service is not current-
ly activated, and may not initiate a call. Contact an authorized Mercedes-Benz Center and have the system checked or contact the Response Center at 1-800-756-9018 (in the USA) or 1-888-923-8367 (in Canada) as soon as possi-
ble. Call priority If other service calls such as a Roadside Assistance call or Information call are ac-
tive, an emergency call is still possible. In this case, the emergency call will take pri-
ority and override all other active calls. i The indicator lamp in the respective button flashes until the call is concluded. Calls can only be terminated by a Response Center or Custom-
er Assistance Center representative except Roadside Assistance and Information calls, which can also be terminated by using the t button on the multifunction steering wheel or the respective button for ending a telephone call on the audio system or the COMAND* head unit.
! If the indicator lamp continues to flash or the system does not terminate the call at all, contact the Response Center at 1-800-756-9018 (in the USA) or 1-888-923-8367 (in Canada), or Mercedes-Benz Customer Assistance at 1-800-FOR-MERCedes
(1-800-367-6372) in the USA or Customer Ser-
vice at 1-800-387-0100 in Canada. i When a Tele Aid call has been initiated, the audio system is muted. The optional cellular phone (if installed) switches off. If you must use this phone, the vehicle must be parked. Unplug the telephone, switch it on and place the call. The COMAND* navigation system (if engaged) will continue to run. The multifunction display in the instrument cluster is available for use, but spoken commands are not available. Remote door unlock In case you have locked your vehicle unin-
tentionally (e.g. SmartKey inside vehicle), and the reserve SmartKey is not handy:
Contact the Mercedes-Benz Response Center at 1-800-756-9018 (in the USA) or 1-888-923-8367 (in Canada). You will be asked to provide your pass-
word which you provided when you completed the subscriber agreement. or Contact the Tele Aid web page via In-
ternet using the ID and password sent to you shortly after the completion of your acquaintance call. Then return to your vehicle and pull the trunk lid handle for a minimum of 20 seconds until the SOS button is flashing. The message: Call connecting ap-
pears in the multifunction display. The Response Center will then unlock your vehicle with the remote door un-
locking feature. i The remote door unlock feature is available if the relevant telephone network is available and data connection is possible. The SOS button will flash and the message: Call connecting appears in the multifunction display to indicate receipt of the door unlock command. 309 Controls in detail Useful features Once the vehicle is unlocked, a Response Center specialist might attempt to establish voice con-
tact with the vehicle occupants. If the trunk lid handle was pulled for more than 20 seconds before door unlock authorization was received by the Response Center, you must wait 15 minutes before pulling the trunk lid han-
dle again. Remote door lock If you have forgotten to lock your vehicle and are no longer near it, you can have it locked remotely through the Response Center. The vehicle can be remotely locked within 4 days after the ignition has been switched off. Contact the Mercedes-Benz Response Center at 1-800-756-9018 (in the USA) or 1-888-923-8367 (in Canada). You will be asked to provide your pass-
word which you provided when you completed the subscriber agreement. 310 When you are inside your vehicle the next time and switch on the ignition, the mes-
sage Tele Aid Doors locked by remote con-
trol will appear on the multifunction display. i The remote door lock feature is available if the relevant telephone network is available and data connection is possible. Automatic Maintenance Call The 2007 S-Class is equipped with a fea-
ture which considerably enhances the care of your vehicle. Just prior to your vehicle reaching a maintenance milestone Tele Aid will initiate a message informing the ser-
vice center, important vehicle mainte-
nance information and the vehicle is due for a service appointment. The message is transmitted in the background with no driver interaction necessary. This feature allows your preferred Mercedes-Benz Cen-
ter to significantly improve the process of arranging your service appointment and ensures that your vehicle receives the best possible care. i The Automatic Maintenance Call feature is available if the relevant telephone network is available and data connection is possible. Stolen Vehicle Recovery services In the event your vehicle was stolen:
Report the incident to the police. The police will issue a numbered incident report. Pass this number on to the Mercedes-Benz Response Center along with your password issued to you when you subscribed to the service. The Response Center will then attempt to covertly contact the vehicles Tele Aid system. Once the vehicle is located, the Response Center will contact the local law enforcement and you. The vehicles location will only be provided to law enforcement. i When the anti-theft alarm or the tow-away alarm stays on for more than 30 seconds, a call is initiated automatically to the Response Cen-
ter, see Anti-theft alarm system ( page 66). Garage door opener The integrated remote control is capable of operating up to three separately controlled devices. It provides a convenient way to re-
place up to three hand-held remote con-
trols used to operate devices such as garage door openers, gate openers, or oth-
er devices compatible with HomeLink or some other systems. Before the integrated remote control can be used, it must be programmed to the ga-
rage door opener, gate operator or other device you wish to operate. See the follow-
ing instructions for programming informa-
tion. Indicator lamp Interior rear view mirror with integrated remote control 1 2 3 4 Signal transmitter button Needed for programming (not part of vehi-
cle equipment):
5 6 Hand-held remote control of ga-
rage door opener, gate operator or other device Hand-held remote control button Controls in detail Useful features Warning!
G Before programming the integrated remote control to a garage door opener or gate operator, make sure people and objects are out of the way of the device to prevent po-
tential harm or damage. When programming a garage door opener, the door moves up or down. When programming a gate operator, the gate opens or closes. Do not use the integrated remote control with any garage door opener that lacks safety stop and reverse features as required by U.S. federal safety standards (this includes any garage door opener model manufactured before April 1, 1982). A garage door that cannot detect an object signaling the door to stop and reverse does not meet current U.S. federal safety standards. When programming a garage door opener, park the vehicle outside the garage. 311 Controls in detail Useful features Do not run the engine while programming the integrated remote control. Inhalation of exhaust gas is hazardous to your health. All exhaust gas contains carbon monoxide (CO), and inhaling it can cause unconsciousness and possible death. Programming integrated remote con-
trol Step 1:
Switch on the ignition ( page 82). Step 2:
If you have previously programmed a signal transmitter button and wish to retain its programming, proceed to step 3. If you are programming the integrated remote control for the first time, press and hold the two outer signal transmit-
ter buttons 2 and 4 and release them only when indicator lamp 1 be-
gins to flash after approximately 20 seconds (do not hold the button for 312 longer than 30 seconds). This proce-
dure erases any previous settings for all three channels and initializes the memory. If you later wish to program a second and/or third hand-held transmitter to the remaining two signal transmitter buttons, do not repeat this step and be-
gin directly with step 3. Step 3:
Hold the end of hand-held remote control 5 of the device you wish to train approximately 2 to 5 in
(5 to12 cm) away from the signal trans-
mitter button (2, 3 or 4) to be pro-
grammed, while keeping indicator lamp 1 in view. Step 4:
Using both hands, simultaneously press hand-held remote control button 6 and the desired signal trans-
mitter button (2, 3 or 4). Do not release the buttons until step 5 is com-
pleted. Indicator lamp 1 will flash, first slowly and then rapidly. i Indicator lamp 1 flashes immediately the first time the signal transmitter button is pro-
grammed. If this button has already been pro-
grammed, the indicator lamp will only start flashing after 20 seconds. Step 5:
After indicator lamp 1 changes from a slow to a rapidly flashing light, release the hand-held remote control button and the signal transmitter button. Step 6:
Press and hold the just-trained signal transmitter button (2, 3 or 4) and observe indicator lamp 1. If indicator lamp 1 stays on constantly, programming is complete and your device should activate when the respective signal transmitter button (2, 3 or 4) is pressed and re-
leased. i If indicator lamp 1 flashes rapidly for about 2 seconds and then turns to a constant light, continue with programming steps 8 through 12 as your garage door opener may be equipped with the rolling code feature. Step 7:
To program the remaining two signal transmitter buttons, repeat the steps above starting with step 3. Rolling code programming To train a garage door opener (or other rolling code devices) with the rolling code feature, follow these instructions after completing the Programming portion
(steps 1 through 6) of this text. (A second person may make the following training procedures quicker and easier.) Step 8:
Locate training button on the garage door opener motor head unit. Exact location and color of the button may vary by garage door opener brand. Depending on manufacturer, the training button may also be referred to as learnor smart button. If there is difficulty locating the transmitting button, refer to the garage door opener operators manual. Step 9:
Press the training button on the ga-
rage door opener motor head unit. The training light is activated. You have 30 seconds to initiate the follow-
ing two steps. Step 10:
Return to the vehicle and firmly press, hold for 2 seconds and release the pro-
grammed signal transmitter button
(2, 3 or 4). Step 11:
Press, hold for 2 seconds and release same signal transmitter button a sec-
ond time to complete the training pro-
cess. Controls in detail Useful features i Some garage door openers (or other rolling code equipped devices) may require you to press, hold for 2 seconds and release the same signal transmitter button a third time to com-
plete the training process. Step 12:
Confirm the garage door operation by pressing the programmed signal trans-
mitter button (2, 3 or 4). Step 13:
To program the remaining two signal transmitter buttons, repeat the steps above starting with step 3. Gate operator/Canadian programming Canadian radio-frequency laws require transmitter signals to time-out (or quit) after several seconds of transmission which may not be long enough for the integrated signal transmitter to pick up the signal during programming. Similar to this Canadian law, some U.S. gate operators are designed to time-out in the same manner. 313 Controls in detail Useful features If you live in Canada or if you are having difficulties programming a gate operator
(regardless of where you live) by using the programming procedures, replace step 4 with the following:
Step 4:
Press and hold the signal transmitter button (2, 3 or 4). Do not release this button until it has been successful-
ly trained. While still holding down the signal transmitter button (2, 3 or 4), cycle your hand-held remote control button 6 as follows: Press and hold button 6 for 2 seconds, then release it for 2 seconds, and again press and hold it for 2 seconds. Repeat this se-
quence on the hand-held remote con-
trol until the frequency signal has been learned. Upon successful training, indi-
cator lamp 1 will flash slowly and then rapidly after several seconds. Proceed with programming step 5 and step 6 to complete. 314 i Upon completion of programming the inte-
grated remote control, make sure you retain the hand-held remote control that came with the ga-
rage door opener, gate operator or other device. You may need it for use in other vehicles, for fu-
ture programming of an integrated remote con-
trol, or simply for continued use as a hand-held remote control to operate the respective device in other situations. Reprogramming a single signal trans-
mitter button To program a device using a signal trans-
mitter button previously trained, follow these steps:
Switch on the ignition ( page 82). Press and hold the desired signal transmitter button (2, 3 or 4). Do not release the button. Indicator lamp 1 will begin to flash af-
ter 20 seconds. Without releasing the signal transmitter button, proceed with programming starting with step 3. Operation of integrated remote control Switch on the ignition ( page 82). Select and press the appropriate inte-
grated signal transmitter button (2, 3 or 4) to activate the remote con-
trolled device. The integrated remote control trans-
mitter continues to send the signal as long as the button is pressed up to 20 seconds. Erasing integrated remote control memory Switch on the ignition ( page 82). Simultaneously press and hold outer signal transmitter buttons 2 and 4, for approximately 20 seconds, until indicator lamp 1 flashes rapidly. Do not hold for longer than 30 seconds. The codes of all three channels are erased. i If you sell your vehicle, erase the codes of all three channels. Programming tips If you are having difficulty programming the integrated remote control, here are some helpful tips:
Check the frequency of hand-held re-
mote control 5 (typically located on the reverse side of the remote). The in-
tegrated remote control is compatible with radio-frequency devices operating between 280-390 MHz. Put a new battery in hand-held remote control 5. This will increase the likeli-
hood of the hand-held remote control sending a faster and more accurate sig-
nal to the integrated remote control. While performing step 3, hold hand-held remote control 5 at differ-
ent lengths and angles from the signal transmitter button (2, 3 or 4) you are programming. Attempt varying an-
gles at the distance of 2 to 5 in
(5 to 12 cm) away or the same angle at varying distances. If another hand-held remote control is available for the same device, try the programming steps again using that other hand-held remote control. Make sure new batteries are in the hand-held remote control before beginning the procedure. Straighten the antenna wire from the garage door opener assembly. This may help improve transmitting and/or receiving signals. i Certain types of garage door openers are in-
compatible with the integrated remote control. If you should experience further difficulties with programming the integrated remote control, contact an authorized Mercedes-Benz Center, or call Mercedes-Benz Customer Assistance Cen-
ter (in the USA only) at 1-800-FOR-MERCedes, or Customer Service (in Canada) at 1-800-387-0100. Controls in detail Useful features i USA only:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interfer-
ence, and
(2) this device must accept any interference re-
ceived, including interference that may cause undesired operation. Any unauthorized modification to this device could void the users authority to operate the equipment. i Canada only:
This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference re-
ceived, including interference that may cause undesired operation of the device. Any unauthorized modification to this device could void the users authority to operate the equipment. 315 Therefore, the vehicles brake system should al-
ways be warmed-up before it is parked after cleaning. To do so, please drive your vehicle for several minutes to allow the brakes to dry. When applying Mercedes-Benz approved Tire Care and Mercedes-Benz approved Wheel Care products, take care not to spray them on the brake disks. Plastic and rubber parts Use a gentle dishwashing detergent or mild detergent for delicate fabrics as a washing solution. Wipe with a cloth moistened in a luke-
warm solution. The surface may temporarily change color. If this is the case, wait for it to dry. Warning!
G Do not use cleaners or cockpit care sprays containing solvents to clean the cockpit or the steering wheel. Cleaners containing sol-
vents will make the surface porous and vehi-
cle occupants could suffer serious injuries from plastic parts coming loose in the event of air bag deployment.
! Do not use oil, wax or scouring agents on these parts. Never apply strong force and only use a soft, non-scratching cloth when cleaning the surface. Do not attempt to wipe the surface with a dry cloth or sponge. Otherwise you may scratch or damage the sur-
face. Hard plastic trim items Use Mercedes-Benz approved Interior Care, a soft, lint-free cloth and apply with light pressure.
! Never apply strong force and only use a soft, non-scratching cloth when cleaning the surface. Do not attempt to wipe the surface with a dry cloth or sponge. Otherwise you may scratch or damage the sur-
face. Operation Vehicle care Audio display
! Bei der Reinigung muss das Audio Display ausgeschaltet und abgekhlt sein. Reinigen Sie die Audio Displayober-
flche bei Bedarf mit einem han-
delsblichen Mikrofasertuch und Reiniger fr TFT/LCD-Displays. An-
schlieend trocknen und polieren Sie die Oberflche mit einem trockenen Mikrofasertuch.
! Verwenden Sie zum Reinigen keine alkohol-
ischen Verdnner, Benzin oder scheuernde Rein-
igungsmittel. Diese knnen die Audio Displayoberflche beschdigen oder zerstren. Steering wheel Wipe with a damp cloth and dry thor-
oughly or clean with Mercedes-Benz approved Leather Care. Carpets Use Mercedes-Benz approved Carpet and Fabric Care for cleaning the car-
pets. 379
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2007-12-20 | 162.4 ~ 162.55 | CYY - Communications Receiver used w/Pt 15 Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2007-12-20
|
||||
1 | Applicant's complete, legal business name |
Panasonic Corporation of North America
|
||||
1 | FCC Registration Number (FRN) |
0003762242
|
||||
1 | Physical Address |
Two Riverfront Plaza, 9th Floor
|
||||
1 |
Newark, New Jersey 07102-5490
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
M******@us.ul.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
ACJ
|
||||
1 | Equipment Product Code |
932CQ-EP1660WB
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
B******** B****
|
||||
1 | Title |
Project Manager
|
||||
1 | Telephone Number |
201-3********
|
||||
1 | Fax Number |
201-3********
|
||||
1 |
B******@us.panasonic.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
UL Japan Inc
|
||||
1 | Name |
H****** S******
|
||||
1 | Physical Address |
4383 Asama-chi
|
||||
1 |
Ise-shi, Mie-ken, 516-0021
|
|||||
1 |
Japan
|
|||||
1 | Telephone Number |
81-59********
|
||||
1 | Fax Number |
81-59********
|
||||
1 |
H******@jp.ul.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
UL Japan Inc.
|
||||
1 | Name |
K**** S******
|
||||
1 | Physical Address |
4383-326 Asama-cho
|
||||
1 |
Ise-shi, Mie-ken, 516-0021
|
|||||
1 |
Japan
|
|||||
1 | Telephone Number |
81-59********
|
||||
1 | Fax Number |
81-59********
|
||||
1 |
H******@jp.ul.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 02/03/2008 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | CYY - Communications Receiver used w/Pt 15 Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Car Audio system w/ BT | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
UL Japan, Inc.
|
||||
1 | Name |
M****** F******
|
||||
1 | Telephone Number |
81-59********
|
||||
1 | Fax Number |
81-59********
|
||||
1 |
m******@jp.ul.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B | 162.40000000 | 162.55000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC