all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
USer Manual for GPRS | Users Manual | 237.15 KiB | March 03 2004 | |||
1 2 |
|
User Manual Bluetooth | Users Manual | 2.67 MiB | March 03 2004 | |||
1 2 |
|
User Manual for | Users Manual | 1.78 MiB | March 03 2004 | |||
1 2 |
|
User Manual for WLAN | Users Manual | 50.19 KiB | March 03 2004 | |||
1 2 | RF Exposure Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | Cover Letter(s) | May 03 2004 | ||||||
1 2 | Cover Letter(s) | March 03 2004 | ||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | ID Label/Location Info | March 03 2004 | ||||||
1 2 | External Photos | March 03 2004 | ||||||
1 2 | Internal Photos | March 03 2004 | ||||||
1 2 | RF Exposure Info | May 03 2004 | ||||||
1 2 | Cover Letter(s) | |||||||
1 2 | RF Exposure Info | May 03 2004 | ||||||
1 2 | RF Exposure Info | May 03 2004 | ||||||
1 2 | RF Exposure Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | May 03 2004 | ||||||
1 2 | Test Report | |||||||
1 2 | Test Setup Photos | May 03 2004 | ||||||
1 2 | Test Report | May 03 2004 | ||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Test Report | August 03 2004 | ||||||
1 2 | Test Report | |||||||
1 2 | Test Report | May 03 2004 |
1 2 | USer Manual for GPRS | Users Manual | 237.15 KiB | March 03 2004 |
Supplementary Instructions for GSM/GPRS This manual contains supplementary instructions regarding the use of the computer. It explains the cases where the operation of the computer differs from that in the Operating Instructions. Your computer is equipped with GSM/GPRS enabling you to communicate using radio frequencies. About the abbreviations in this manual, refer to the table on page 5. Contents Precautions Safety Precautions ............................................. 2 For U.S.A. .......................................................... 3 Names and Functions of Parts LED Description.................................................. 5 Abbreviations ...................................................... 5 Using GSM/GPRS Installing/Removing a SIM Card ......................... 6 Setting Up the Remote Network for GPRS ........ 7 Using CheckNet Running ............................................................ 11 Using CheckNet ............................................... 12 Specifications.................................................... 20 Precautions Safety Precautions The following safety precautions must be observed during all phases of the operation, usage, service or repair of any Personal Computer or Handheld Computer incorporating GSM/GPRS modem. Manufacturers of the cellular terminal are advised to convey the following safety information to users and operating personnel and to incorporate these guidelines into all manuals supplied with the product. Failure to comply with these precautions violates safety standards of design, manufacture and intended use of the product. Panasonic assumes no liability for customer failure to comply with these precautions. When in a hospital or other health care facility, observe the restrictions on the use of mobiles. Switch Personal Computer or Handheld Computer incorporating GSM/GPRS modem off, if instructed to do so by the guidelines posted in sensitive areas. Medical equipment may be sensitive to RF energy. The operation of cardiac pacemakers, other implanted medical equipment and hear-
ing aids can be affected by interference from Personal Computer or Handheld Com-
puter incorporating GSM/GPRS modem placed close to the device. If in doubt about potential danger, contact the physician or the manufacturer of the device to verify that the equipment is properly shielded. Pacemaker patients are advised to keep their Personal Computer or Handheld Computer incorporating GSM/GPRS modem away from the pacemaker, while it is on. Switch off Personal Computer or Handheld Computer incorporating GSM/GPRS modem before boarding an aircraft. Make sure it cannot be switched on inadvert-
ently. The operation of wireless appliances in an aircraft is forbidden to prevent interference with communications systems. Failure to observe these instructions may lead to the suspension or denial of cellular services to the offender, legal action, or both. Do not operate Personal Computer or Handheld Computer incorporating GSM/GPRS modem in the presence of flammable gases or fumes. Switch off the cellular terminal when you are near petrol stations, fuel depots, chemical plants or where blasting operations are in progress. Operation of any electrical equipment in potentially ex-
plosive atmospheres can constitute a safety hazard. Your Personal Computer or Handheld Computer incorporating GSM/GPRS modem receives and transmits radio frequency energy while switched on. Remember that interference can occur if it is used close to TV sets, radios, computers or inadequately shielded equipment. Follow any special regulations and always switch off Personal Computer or Handheld Computer incorporating GSM/GPRS modem wherever for-
bidden, or when you suspect that it may cause interference or danger. Road safety comes first! Do not use a Personal Computer or Handheld Computer incorporating GSM/GPRS modem while driving a vehicle. Do not place the com-
puter with GSM/GPRS modem in an area where it could cause personal injury to the driver or passengers. It is recommended to stow the unit in the boot or secure stow-
age area while driving. 2 Do not place the computer with GSM/GPRS modem in an area over an air bag or in the vicinity where an air bag may deploy. Air bags inflate with great force and if the computer with GSM/GPRS modem is placed in the air bag deployment area may be propelled with great force and cause serious injury to occupants of the vehicle. IMPORTANT!
Personal Computer or Handheld Computer incorporating GSM/GPRS modem oper-
ate using radio signals and cellular networks cannot be guaranteed to connect in all conditions. Therefore, you should never rely solely upon any wireless device for essential communications, for example emergency calls. Remember, in order to make or receive calls, Personal Computer or Handheld Com-
puter incorporating GSM/GPRS modem must be switched on and in a service area with adequate cellular signal strength. Some networks do not allow for emergency calls if certain network services or phone features are in use (e.g. lock functions, fixed dialing etc.). You may need to deacti-
vate those features before you can make an emergency call. Some networks require that a valid SIM card be properly inserted in Personal Com-
puter or Handheld Computer incorporating GSM/GPRS modem. For U.S.A. Federal Communications Commission Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the Panasonic Service Center or an experienced radio/TV technician for help. Safety Notice Do not touch or move antenna while the unit is transmitting or receiving. Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body, especially the face or eyes, while transmitting. Do not operate a portable transmitter near unshielded blasting caps or in an explosive environ-
ment unless it is type especially qualified for such use. 3 Precautions Warning To assure continued compliance, use only shielded interface cables when connecting to a com-
puter or peripheral. Also, any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled envi-
ronment. This equipment must be installed and operated in accordance with provided instructions and minimum 1inch (2.5 cm) spacing must be maintained between the equipment and your face during your GSM voice call. This equipment may use multiple installed transmitters, which may be capable of simultaneous transmission. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause un-
desired operation. Responsible Party: Matsushita Electric Corporation of America One Panasonic Way Secaucus, NJ 07094 Tel No:1-800-LAPTOP-5 (1-800-527-8675) 4 Names and Functions of Parts Except the followings, refer to the Operating Instructions. Antenna LED Description Status Indicator:
A green LED will light while communicating. Mode Off 600 ms On/
600 ms Off 75 ms On/3 s Off 75 ms On/75 ms Off/
75 ms On/3 s Off Flashing On Function GSM/GPRS modem is off or running in SLEEP or Alarm. No SIM card inserted or no PIN entered, or network search in progress, or ongoing user authentication, or network login in progress. Logged to network (monitoring control channels and user interactions). No call in progress. One or more GSM/GPRS contexts activated. Indicates GSM/GPRS data transfer: When a GSM/GPRS transfer is in progress, the LED goes on within 1 second after data packets were exchanged. Flash duration is approximately 0.5 s. Depending on type of call:
Voice call: Connected to remote party. Data call: Connected to remote party or exchange of parameters while setting up or disconnecting a call. Abbreviations APN CID GPRS GSM Global System of Mobile Communication IP Access Point Name Context Identity General Packet Radio Service Internet Protocol PIN PLMN QOS SIM TCP Personal Identification Number Public Land Mobile Network Quality of Service Subscriber Identity Module Transmission Control Protocol 5 Using GSM/GPRS Inserting/Removing a SIM Card A SIM card has been installed into the back of the CF-P1 underneath the battery. When replacing the SIM card, follow the instruction below. CAUTION Do not insert/remove the SIM card when the GSM/GPRS power is on. 1 Power off the GSM/GPRS modem using the 2 Power off the CF-P1 and remove the battery pack. Operating Instructions First-time Operation) 3 Inserting a SIM Card CheckNet Window (
page13).
(1) Hold the CF-P1 in a vertical position where the antenna is on your right hand side. Slide the SIM card into the slot, with the metal connectors facing down. Make sure the SIM card goes under A.
(2) Insert the card all the way into the slot as shown in the illustration. Ensure that the beveled corner is positioned in the bottom left corner. A CAUTION Insert with care, because if the SIM card is not inserted correctly, the computer will not operate, and the SIM card may be dam-
aged by contact with the battery. Removing a SIM Card Slide the SIM card out in the direction of the arrow while pushing B with the provided stylus or a finger. 4 Insert the battery pack and set the cover.
Operating Instructions First-time Operation). B NOTE If the card is inserted and removed repeatedly, the printing on the card surface may rub off and create a powder residue. This powder may become affixed to the terminals causing poor contact. If you notice that the terminals have become soiled due to repeated insertion and removal, wipe the terminals lightly with a clean cloth. 6 Setting Up the Remote Network for GPRS The settings may vary with the local service provider. This information has to be requested from the local provider. (The following sample screenshots illustrate the setup procedure.) 1 Turn on your computer. (
2 Set up the Remote Network. Operating Instructions)
(1) Tap, in order,
- [Settings] - [Connections] tab - [Connections].
(2) Tap [Add a new modem connection] at [My ISP].
(3) Enter the suitable connection name and then select
[Panasonic RF Modem] at [Select a modem:], then tap
[Next]. 7 Using GSM/GPRS
(4) Enter [*99***1#] for telephone number in the box. The 1 before the # corresponds to the CID number of the APN setting for step 3 (3) (
page9). When set-
ting the connection to CID2, the telephone number is
[*99***2#].
(5) Tap [Next].
(6) Enter the user name and password, and enter domain if provided by ISPor network administrator.
(Check with your network manager or the operator for the SIM you are using to confirm the information to be requested).
(7) Tap [Advanced...].
(8) Select [57600]at [Baud rate], and then tap [TCP/IP]tab. 8
(9) Remove check marks for [Use software compression]
and [Use IP header compression], then tap [ok].
(10)Tap [Finish]. 3 Set up the access point name.
(1) Tap and hold on the navigation bar and tap [Op-
tions] - [RAS] tab.
(2) Select RAS authentication method if necessary for a different authentication method other than the [RAP and CHAP], and tap [APN].
(3) Enter the access point name that connects to the GPRS network.
(Check with your network manager or the operator for the SIM you are using to confirm the setting informa-
tion.) When selecting the CID tab number here, select the same number as the number before the # in the telephone number in step 2 (4) (
page 8).
(4) Tap [ok]. The settings for the GSM are the same as the GPRS, except for the following:
No need to set the access point name Set the number, user name, password, and the domain for the requested ISP. 9 Using GSM/GPRS 4 Connect /Disconnect to GPRS network
(1) Connecting to display the connectivity bubble (A).
(A) Tap Make sure that the name of the setting in step 2(3)
page 7) is displayed and tap the telephone num-
ber. The connection will start. Disconnecting Tap connect]. to display the connectivity bubble and tap [Dis-
When multiple connection settings have been created, the desired setting may not be selected using only the operations described above. In this case, use the fol-
lowing settings.
(1) Tap on the navigation bar then tap [Settings] to display [Connections] screen*1.
*1You can also tap
- [Connections].
- [Settings] - [Connections]tab
(2) Tap [Manage existing connections] at [My ISP]*2.
*2This appears after setting the remote network (
page 7-9).
(3) Change the setting from [Auto pick] to a desired setting (in this case, select GPRS).
(4) Tap [ok]. 10 Using CheckNet CheckNet is software that is used during voice calls or data communications via a GSM/
GPRS modem installed in the CF-P1. To conduct communications using this product, a SIM card (sold separately) is required. GPRS communications can only be conducted when using a SIM card for an operator that supports GPRS communications. Using the CheckNet utility, you can use the following functions. Network information indication RF signal level indication GSM/GPRS modem power control RAS (Dial-up network) control SMS (Short Message Service) Voice call Running When the power is switched on, ings show the variation of the icon and its meanings. These icons flash during initialization or when the battery power is low. will be displayed on the navigation bar. The follow-
Navigation bar icon
Initializing the GSM/GPRS modem GSM/GPRS modem is powered off. GPRS modem error SIM card error Unread message Out of coverage
: GSM service is available (the number of bars indicates the signal strength) (
: GSM/GPRS service is available (the number of bars indicates the signal strength) (
page 13) page 13) CAUTION Do not turn off the CF-P1 by the power switch while bar. is displayed on the navigation NOTE Tap the icon to display text information indicating the modem or network status. Tap and hold the icon to display the pop-up menu. If up, the [Voice] screen will be displayed.
- [Programs] - [CheckNet] is tapped when CheckNet has already been started 11 Using CheckNet Using CheckNet You can select the menu from the CheckNet window. With the CheckNet window, detailed information can be seen graphically. To open the CheckNet window Tap and hold below). To close the CheckNet window Tap the A B on the navigation bar and tap [Open] from the popup menu (shown button on the navigation bar. (You cannot exit the CheckNet.) H G I N J K M L
<Popup menu>
E Cell information which GPRS modem is currently using PLMN:
LAC:
CELL ID: Cell ID [Hex]
CH:
Public Land Mobile Network ID Code Location Area Code [Hex]
ARFCN (Absolute Fre-
quency Channel Number) of the BCCH carrier F Status of the CheckNet G Number of unread SMS (
page 14) C D E F H I J K L M
<CheckNet window>
A Signal Strength Value: This indicates the signal strength by value. B Signal Strength Meter: This indicates the signal strength by the bar graph. (
page 13) C Communication Mode: Display available network service. GSM:
Only GSM is available GSM + GPRS: GSM and GPRS are available D An operator name with which GSM/
GPRS modem is currently registered 12 H Power on/off the GSM/GPRS modem Start RAS (Dial-up network) from I CheckNet (available only when in area of signal coverage, page 18), and stop if connected. Display [SMS] screen
page 14) J K Display [Voice] screen page 15)
L Display [Options] screen (
page 17) M Display GSM/GPRS modem / SIM card information (
page 19) N Open the CheckNet window NOTE When tapped the [Power] or [About], functions may not work properly. In this case, reset the computer. RF signal level indication Navigation bar icon GSM GSM+GPRS Signal level Out of coverage
-96 dBm
-95dBm -84 dBm
-85 dBm -74 dBm
-75 dBm Signal Strength Value and Sig-
nal Strength Meter on the CheckNet window Level 1 Level-1 Level-2 Level-3 Level-4 Level-5 Level-6 Level-7 Level-8 Level-9 Level-10 Level 10
-100 dBm
-99 dBm -95 dBm
-94 dBm -90 dBm
-89 dBm -85 dBm
-84dBm -80 dBm
-79 dBm -75 dBm
-74 dBm -70 dBm
-69 dBm -65 dBm
-64 dBm -60 dBm
-59 dBm 13 Using CheckNet SMS SMS messages can be sent or read with the CheckNet. SMS links to the Contacts; therefore, you can input the phone number from the Contacts. Tap [SMS] from the CheckNet window to display the [SMS] screen. A Display S(Send) or R(Receive) Receivers / Senders number B C Date of Sending or Receiving Set the display format using by following
- [Settings] - [System] tab- [Regional Settings] - [Date]
D Unread messages are displayed in bold characters. E If you close the screen before sending a message, this will change to [Restore] when the next SMS screen is opened. E A B D C
[SMS Send/Reply] screen is displayed. To send new SMS 1 In the [SMS] screen, tap [New]. 2 Write destination phone number or tap [To] to show page 16). 3 Write a message and tap [Send]. the Contacts and select the destination (
To reply to SMS 1 In the [SMS] screen, select the message and tap [Re-
2 Write a message and tap [Send]. ply]. To receive SMS SMS messages sent to this computer are automatically received and displayed on this screen. When an SMS message is received, the user is notified by an icon and a Notifica-
Operating Instructions). This function can be dis-
tion LED (
abled using the appropriate settings (
page 17 [General] tab). page 11 and NOTE About the characters used in SMS Up to 160 characters can be received or sent. Note, however, that since some characters are treated as 2-byte characters, the num-
ber that can be received or sent becomes less than 160 if these characters are used. 14 Voice You can make a voice call. Tap [Voice] from the CheckNet window to display [Voice] screen. A [Mic] :To adjust the microphone volume B [Phone] :To adjust the speaker volume C [Mic Mute] :If you add the check mark after connecting, the sound from the microphone will not be transmitted to the person you are speaking to.
*1 This button will change to
[Answer] or [Hang up]. page 16). To make a voice call Input the destination phone number and select [Call]. You can also tap [To] to display the Contacts to select the destination (
When you receive a telephone call The [Voice] screen will be displayed. Answer the phone using the one of the following. Tap [Answer]*1on the [Voice] screen. Press the headsets answer switch*2 when a headset. To end the telephone call Hang up the phone using the one of the following. Tap [Hang up]*1on the [Voice] screen. Press the headsets answer switch*2 to hang up when a headset.
*2 Press for one second. Function will not operate if the switch is not pressed long enough. To receive voice calls and messages when the computer is powered off Even when the computers power is off, it is possible to start up the computer and receive voice calls using the fol-
lowing settings. 1 Tap
- [Settings] - [System]tab - [Option Devices]
2 Add a checkmark at the [Supply power to the RF mod-
ule when the unit is suspended] and at the [Enable re-
sume when RI signal is detected].
- [RF serial]tab. 3 Tap [ok]. A B C 15 Using CheckNet A telephone function can be used by using one of the follow-
ings. (
Operating Instructions Names and Functions of Parts) Handset
- The internal microphone with the receiver Speaker phone
- The internal microphone with the speaker Headset
- The headset (model No. CF-VHSP11W) Headphone
- The internal microphone with stereo headphones (the adap-
tor included with CF-VHSP11W is required). A B To change this setting, tap
[Panasonic Settings] - [Phone] tab.
- [Settings] - [System] tab-
Handset Speaker phone Headset Headphone A Uncheck Check Uncheck Uncheck B Uncheck Uncheck Uncheck Check Headset/Headphone No use No use Use headset Use headphone NOTE If you try to initiate a dial-up using the GSM/GPRS modem during a voice call, the voice call will be terminated. Contacts Contacts maintains a list of friends, colleagues and customers so that you can easily find the information you are looking for.
- [Contacts]. Tap You can create or change a contact, or add a note to a con-
tact. You can send messages or make a voice call by specifying a receiver from Contacts. Tap and hold the desired receiver, and tap [Voice Call] or
[Send SMS]. If there is more than one phone numbers for the desired receiver, a screen will appear for selecting the appropriate number. For details, tap
- [Help] - [Contacts]. 16 Options Tap [Options...] from the CheckNet window to display the [Options] screen.
[General] tab A If checked, the main window is shown when this ap-
plication is started. cation is started. B If checked, the power is suppressed when this appli-
C If checked, notification LED does not light even when there is an unread message or while a message is be-
ing received. D If checked, sound is not generated when the first un-
E If checked, ringer sound is not generated when a voice read message is received. phone call is received. F Select the Navigation Bar icon. When the [Network]
is selected, the mail icon is displayed only for a few seconds after the unread SMS is received. When the
[SMS] is selected, the mail icon will be displayed while there is an unread SMS. A B C D E F To enable PIN lock Tap [Lock PIN] and enter the PIN code (4digits), then tap [OK].
([Lock PIN] will change to [Unlock PIN].) Next time when GPRS modem is turned on, the PIN code will be requested. To disable PIN lock Tap [Unlock PIN] and enter PIN code (4digits), then tap [OK].
([Unlock PIN] will change to [Lock PIN].) CAUTION If an incorrect PIN code is input repeatedly (number of times depends on SIM), the PUK screen on the right will be displayed. If an incorrect PUK code is input repeatedly in this screen as well, the SIM will be locked, and can no longer be used. 17 A B C D E F G a Using CheckNet
[RAS] tab A [GSM]: Select dial-up network setting for GSM. B [GPRS]: Select dial-up network setting for GPRS. C [Save ID]: If checked, the last valid user ID and password are used as default user ID and password. D [Skip ID Dialog Box]: If checked, skip to show the dialog box to enter user ID and password if valid ID/password are saved. E [Check ELC before dial]: If checked, the signal strength is checked before the dial-up network connection is started. Since the network connection can be established using the operation method explained in step 4 on page 9, there is no need for settings A - E . If CheckNet settings are required, use the following settings. 1 Tap
- [Settings] - [Connections] - [Connections]
2 Select the same setting in the [Network Management]
- [Advanced]tab - [Select Networks]. screen a . In this case, the [Network Card] will be displayed in the connectivity bubble. F [Authentication Method]: Select RAS authentication method. G [APN]: If tapped, the [APN Settings] screen is displayed. Input the name of the access point that mediates commu-
nications between the GPRS network and the Internet. There are two APN settings (CID1and CID2). The APN used corresponds to the n in the dialup phone number
*99***n# (
page 8).
[Access Point Name]: Specify the access point name(APN). Check with your network manager or the operator for the SIM you are using to confirm the name of the access point to be set. As a rule, there is no need to change the QOS
(Quality of Service) setting. Change this only if you are instructed to do so by your network manager. 18
[Operator List] tab Since the operator is usually selected automatically, it is not necessary to change it. To change the settings manually, perform the following procedures. 1 Make the settings at [Mode]. Auto:
Manual: Keep trying to connect the operator se-
The operator is selected automatically lected manually Preferred: Try to connect the operator selected manu-
ally. If it fails, try to connect automatically. 2 When you tap [Manual] or [Preferred], tap [Scan] and select operator from the scanned list, then tap [Regis-
ter]. CAUTION Do not turn off the computer while this function is run-
ning. NOTE Since these settings are saved even after the GSM/GPRS modem is turned off, the next time the power is turned on the GSM/GPRS modem will try to connect using the previous settings. We recommend that you change the mode to [Auto] when moving out the selected operators range. About Select [About] to confirm GPRS modem / SIM card information. The information is displayed only when the GSM/GPRS modems power is on.
[Wireless Module]
Model:
Rev:
IMEI:
Module name Firmware version number International Mobile station Equipment Identity
[SIM card information]
IMSI:
ICC ID:
My number: Display the telephone number if it is stored International Mobile subscriber Identity Card identification number in the SIM. 19 Specifications All items other than the following specifications are the same as the CF-P1P series.
Operating Instructions) 20 Printed in Japan
1 2 | User Manual Bluetooth | Users Manual | 2.67 MiB | March 03 2004 |
Using a Bluetooth ENGLISH SUPPLEMENTARY INSTRUCTIONS The Setup Wizard Starting My Wirefree Network Device Discovery Serial Ports Specifications E N G L S H I Supplementary Instructions This Supplementary Instructions explains how to get started with a Bluetooth and point out cases where the operation of the computer will differ from that in the Operating Instructions. Bluetooth Antenna NOTE Bluetooth communications are done via an antenna. Do not shield this antenna with the hand, etc. This will negatively effect the performance of your Bluetooth communications. Information to the User This product and your Health This product, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by this product however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones. Because this product operates within the guidelines found in radio frequency safety stan-
dards and recommendations, we believe this product is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and inter-
pret the extensive research literature. In some situations or environments, the use of this product may be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include:
Using this product on board of airplanes, or In any other environment where the risk of interference to other devices or services is perceived or identified as harmful. If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment (e.g. airports), you are encouraged to ask for authorization to use this product prior to turning on the product. Regulatory Information We are not responsible for any radio or television interference caused by unauthorized modi-
fication of this product. The correction of interference caused by such unauthorized modifi-
cation will be the responsibility of the user. We and its authorized resellers or distributors are not liable for damage or violation of government regulations that may arise from failing to comply with these guidelines. 2 Read Me First - For U.S.A. Replace as follows. Federal Communications Commission Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip-
ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the Panasonic Service Center or an experienced radio/TV technician for help. Safety Notice Do not touch or move antenna while the unit is transmitting or receiving. Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body, especially the face or eyes, while transmitting. Do not operate a portable transmitter near unshielded blasting caps or in an explosive environment unless it is type especially qualified for such use. Warning To assure continued compliance, use only shielded interface cables when connecting to a computer or peripheral. Also, any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and minimum 1.5 cm spacing must be provided between antenna and all persons body
(excluding extremities of hands, wrist and feet) during wireless modes of operation. This equipment may use multiple installed transmitters, which may be capable of simulta-
neous transmission. E N G L S H I This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation. Responsible Party: Matsushita Electric Corporation of America One Panasonic Way Secaucus, NJ 07094 Tel No:1-800-LAPTOP-5 (1-800-527-8675) 3 The Setup Wizard The Setup Wizard guides you through each step necessary to configure your device for connectivity. Setup: Welcome My Wirefree Network assigns PDA as the default name. This is the name by which your PDA will be known to other devices. A personal device passkey is used during bonding or connections for security purposes. The default is to not set a personal device passkey. A personal device passkey is only recommended when advanced security is enabled. To personalize your device settings:
1. Enter a device name. 2. If you want to have a personal device passkey, enter the same value in Passkey and Confirm Passkey. 3. Tap Next. My Wirefree Network Copyright 2003 Rappore Consulting, Inc. Page 7 Setup: Hardware Test The hardware test initializes and tests the Bluetooth radio. It ensures that the My Wirefree Network software can communicate with the Bluetooth radio. The test does not take very long. However, you can skip this test and continue with the setup wizard. 1. Tap Test. An unsuccessful hardware test may mean your Bluetooth radio is not functioning properly. Refer to your device documentation to verify that the radio is properly installed. If the Bluetooth radio is a CF or other removable card, verify that the card is inserted properly. Verify that the power switch for builtin Bluetooth modules is in the ON position. Page 8 Copyright 2003 Rappore Consulting, Inc. My Wirefree Network Setup: My Services All services that can be accessed or shared by your device can be enabled or disabled now in the Setup Wizard or later from the My Services screen. Access services. Enable your device to see and use services on a remote device. Share services. Enable your device to provide services that other devices can see and access. The following services can be enabled or disabled:
Access Audio Gateway*. Access Business Cards*. Access Calendars*. Access Email. Access Files*. Access Notes. Access Serial Ports*. Access the Internet*. Network Type ActiveSync. Serial Port Type ActiveSync*. Share Business Cards*. Share Files*. Share Serial Ports.
(*These services are enabled by default.) Each enabled service is displayed on the PDA screen with a check in its box. After enabling or disabling services, tap Next. My Wirefree Network Copyright 2003 Rappore Consulting, Inc. Page 9 Setup: My Shared Folders To make the files and subfolders available for others to use, a folder must be shared. By default, you will not have a shared folder when you start My Wirefree Network. If you do not want to share any folders, Tap No and skip to the next section. If you want to share a folder, Tap Yes. If you type yes, the Properties for Shared Folder displays. Type the Share Name which will be seen by remote users. By default it is named New Shared Folder. Type an existing Folders full path. The default value is \My Documents. Tap OK to exit shared folder properties. Page 10 Copyright 2003 Rappore Consulting, Inc. My Wirefree Network Tap Add to add another shared folder or tap Next to continue. My Wirefree Network Copyright 2003 Rappore Consulting, Inc. Page 11 Setup: My Business Cards This configuration option will display if you have contacts in the Contacts program. Each contact will be displayed with a check box. You will need to enter your own contact information into the Contacts program. 1. Tap the business card or cards that you desire sent to remote devices when a remote device requests your business card. 2. Tap Next. Setup: Complete!
This screen displays when you have successfully configured My Wirefree Network. 1. Tap Finish. My Wirefree Network is ready for use. Turn to the next page for further instructions on Starting My Wirefree Network. Page 12 Copyright 2003 Rappore Consulting, Inc. My Wirefree Network Starting My Wirefree Network There are two ways to start My Wirefree Network. If My Wirefree Network appears in the Start menu:
1. Tap Start. 2. Tap My Wirefree Network Otherwise, if My Wirefree Network does not appear when you tap Start, 2. Tap Programs. 3. Then tap My Wirefree Network from the displayed icons. My Wirefree Network Copyright 2003 Rappore Consulting, Inc. Page 13 Device Discovery The My Wirefree Network program has two main components:
Devices locates and lists other Bluetooth wireless devices by address or name, so that you can access the wireless devices and use the services they provide. The Devices screen is the first screen displayed by My Wirefree Network as it starts. My Device aids you in configuring your own device and the resources that you choose to share with other wireless devices. Page 16 Copyright 2003 Rappore Consulting, Inc. My Wirefree Network Serial Ports Serial Port (SPP) on Remote Device The Serial Port service emulates an RS232 (or similar) serial cable. The service name will usually identify the serial port assigned by the remote device. Tap Serial Port. A connection is established to the identified serial port for application use. My Wirefree Network Copyright 2003 Rappore Consulting, Inc. Page 51 Share Serial Ports A shared serial port must be added before a Serial Port service can be displayed to remote users. The Shared Serial Port list also displays those serial ports (SER# and COM#) created by using remote serial device services. Add a Serial Port From the Devices screen, tap My Device. Tap My Services. If the checkbox in front of Share Serial Ports is not checked, tap it to make a check appear. Tap Share Serial Ports. Page 52 Copyright 2003 Rappore Consulting, Inc. My Wirefree Network Tap Add. A serial port is established. Serial Port (COM#) is the name format used for the list. My Wirefree Network Copyright 2003 Rappore Consulting, Inc. Page 53 Remove a Serial Port Tap on the serial port you wish to remove. Tap Remove. The serial port is removed from the list. Note: Depending on the PDA configuration, typically only 4 COM ports are available for application use. Page 54 Copyright 2003 Rappore Consulting, Inc. My Wirefree Network Specifications Transmission method Wireless channels used RF frequency band FHSS system Channels 1 to 79 2402-2480 MHz
1 2 | User Manual for | Users Manual | 1.78 MiB | March 03 2004 |
Handheld Computer OPERATING INSTRUCTIONS Model No. CF-P1Series Contents Getting Started Read Me First ..........................................................3 Precautions ............................................................. 5 Whats in the Box? .................................................. 8 Names and Functions of Parts ............................... 9 First-time Operation .............................................. 12 Operation Starting Up/Shutting Down ................................... 15 LCD (Touchscreen) ............................................... 19 Backlight Setting ................................................... 21 Entering Information ............................................. 22 Program Buttons .................................................. 27 Battery Power ....................................................... 28 SD Memory Card/MultiMedia Card ...................... 29 Panasonic Backup ................................................ 30 Pocket Internet Explorer ....................................... 32 Connecting to Your Computer ............................... 33 Customizing the Computer ................................... 36 Troubleshooting Dealing with Problems .......................................... 39 Appendix For Effective Use .................................................. 43 Specifications ....................................................... 44 LIMITED USE LICENSE AGREEMENT ............... 46 Please read this instructions manual carefully before using this product and save this manual for future use. Model No.*
Serial No. or Code No. Date of Purchase Customer's Record Dealer's Name Dealer's Address
* For the Model No., insert the 12 digit number (for example, CF-P1P3CZF6E) located on the back of the computer. Introduction Thank you for purchasing the Panasonic Handheld Computer. Read the operating instruc-
tions thoroughly for proper operation of your new computer. Illustrations and Terminology in this Manual NOTE:
CAUTION:
NOTE provides a useful fact or helpful information. CAUTION indicates a condition that may result in minor or moder-
ate injury. This illustration means to tap tap [Programs]. at the top of the screen, then to
- [Programs]:
< For the CF-P1P3 series >
This illustration means to press the [A] key. Mode key + NUM key: This illustration means to press and hold the [ ] key (Mode key),
< For the CF-P1P1 series >
then press the [NUM ] key.
Some of the illustrations in this manual may differ slightly in shape from the actual items in order to make the explanation easier to understand. This illustration means to press the [1] key. Where to go for referred information. This operating instructions describes the models below. Note however that the illustrations mainly show the CF-P1P3 series. CF-P1P3 series
(QWERTY key type keyboard) CF-P1P1 series
(numeric keypad type keyboard) 2 Read Me First For U.S.A. Federal Communications Commission Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turn-
ing the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the Panasonic Service Center or an experienced radio/TV technician for help. Warning To assure continued compliance, use only shielded interface cables when connecting to a computer or peripheral. Also, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Responsible Party: Matsushita Electric Corporation of America One Panasonic Way Secaucus, NJ 07094 Tel No:1-800-LAPTOP-5 (1-800-527-8675) Notice for the products using LCD This product uses one or more fluorescent lamps containing a small amount of mercury. It also contains lead in some components. Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or recycling information please contact your local authorities, or the Electronics Industries Alliance: <http://www.eiae.org/>
3 Read Me First For Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Lithium Battery Lithium Battery!
This computer contains a lithium battery to enable the date, time, and other data to be stored. The battery should only be exchanged by authorized service personnel. Warning! A risk of explosion from incorrect installation or misapplication may possibly occur. Pile au lithium!
Le micro-ordinateur renferme une pile au lithium qui permet de sauvegarder certaines donnes comme la date et l'heure notamment. Elle ne devra tre remplace que par un technicien qualifi. Avertissement! Risque d'explosion en cas de non respect de cette mise en garde!
4 Precautions The CF-P1 was developed based on thorough research into real-world portable computing environments. Exhaustive pursuit of usability and reliability under harsh conditions led to innovations such as the magnesium alloy exterior and flexible internal connections. The CF-P1's outstanding engineering has been tested using the stiff MIL-STD- 810F (for vibration and shock) and IP (for dust and water) based procedures. As with any portable computer device precautions should be taken to avoid to the CF-P1 damage. The following usage and handling procedures are recommended. Before putting the computer away, be sure to wipe off any moisture. Avoid Extreme Heat and Cold Do not store or use the computer in locations exposed to heat (in an automobile on a sunny day, for example), direct sunlight, or extreme cold. Avoid moving the computer between locations with large temperature differences. Operation Temperature: -20 oC to 50 oC {-4 oF to 122 oF}
Humidity:
30 % to 80 % RH (No condensation) Storage Temperature: -25 oC to 60 oC {-13 oF to 140 oF}
Humidity:
30 % to 90 % RH (No condensation) Avoid Radio Frequency Inter-
ference Do not place the computer near a television or radio receiver. Be careful of low-temperature burns Avoid more than casual contact with any heat producing area of the computer, AC adaptor, and any option or accessory you use with it. Even low heat, if warmer than the bodys temperature, can cause burns, if the skin is exposed to the heat source for a long enough period of time. Avoid Magnetic Fields Keep the computer away from magnets. Avoid Stacking Do not place heavy objects on the computer. Keep Small Objects Away Do not insert paper clips or other small objects into the computer. Do Not Disassemble the com-
puter Do not attempt to disassemble your computer. Avoid Excessive Force on the LCD Do not apply excessive down-
ward force on the LCD. Handling Do not drop or hit your computer against solid objects. Remove all cables before transporting your computer. We recommend that the battery be fully charged. We also recommend that the backup battery (a built-in coin type bat-
tery) be fully charged. When transporting spare batteries inside a package, briefcase, etc., we recommend that the batteries be stored in a plastic bag. Always carry your computer with you when traveling. Never check it in with luggage. For use of the computer inside an aircraft, we recommend asking the airlines regard-
ing their policy on this issue. It is a good idea to make backup copies on SD memory cards/MultiMedia Cards and carry them with you. 5 Precautions Battery Pack Care should be exercised with regard to the following in order to avoid the possibility of over-heating, fire, or damage. Avoid Heat Do not throw the battery pack into a fire or expose it to exces-
sive heat. Keep Articles Away Do not place the battery pack to-
gether with articles such as neck-
laces or hairpins when carrying or storing. Do Not Disassemble Do not insert sharp objects into the battery pack, expose it to bumps or shocks, or deform, dis-
assemble, or modify it. Do Not Short Do not short the positive (+) and negative (-) contacts. Avoid Extreme Heat, Cold and Direct Sunlight Do not charge, use or leave the battery pack for extended peri-
ods where it will be exposed to direct sunlight, in a hot place (in an automobile on a sunny day, for example), or in a cold place. Do Not Put Into a Microwave Do not put the battery pack into a microwave oven or a pressur-
ized chamber. Do Not Use With Any Other Device The battery pack is rechargeable and was intended for the speci-
fied computer. Do not use it with a device other than the one for which it was designed. 6 Stop Using Should the battery emit an ab-
normal odor, become hot to the touch, become discolored, change shape, or become in any way different from normal, re-
move it from the computer and stop using it. If the battery pack will not be used for a long period of time (a month or more), charge or discharge (use) the battery pack until the remaining battery level becomes 30 % to 40 % and store it in a cool, dry place. The battery pack is not charged when the computer is first purchased. Be sure to charge it before using it for the first time. When the AC adaptor is connected to the computer, charging begins automatically. If the battery leaks and the fluid gets into your eyes, do not rub your eyes. Immedi-
ately flush your eyes with clear water and see a doctor for medical treatment as soon as possible. About High Temperature Mode This computer has a high temperature mode function that prevents the degradation of the battery in high temperature environ-
ments. We recommend setting the high temperature mode function when install-
ing the computer in a car, etc. To do this, set [Charging mode] in
- [Settings] -
[System] tab - [Panasonic Settings] to [High Temperature]. In the high temperature mode, the full charge capacity of battery becomes approximately 80 %. NOTE The battery pack may become warm during recharging or normal use. This is completely normal. Recharging will not commence outside of the allowable temperature range (5 C to 40 C
{41F to 104F})*. Even if charging stops because the temperature is outside the charging temperature range, the battery indicator will remain in the illuminated orange. Once the allowable range requirement is satisfied, charging begins automatically. Note that the recharging time varies based on the usage conditions. (Recharging takes longer than usual when the temperature is 10 C {50 F} or below.) If the temperature is low, the operating time is shortened. Only use the computer within the allowable temperature range. The battery pack is a consumable item. If the amount of time the computer can be run off a particular battery pack becomes dramatically shorter and repeated recharging does not restore its performance, the battery pack should be replaced with a new one. When a spare battery pack is to be carried in a pocket or bag, it is recommended that it be placed in a plastic bag so that its contacts are protected. Always power off the computer when it is not in use. Leaving the computer on when the AC adaptor is not connected will exhaust the remaining battery capacity.
*These temperature settings are valid when the battery is charging and the computer is off. The temperature range may become narrower when the battery is charging and the computer is operating. A lithium ion battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for infor-
mation on how to recycle this battery. Lappareil que vous vous tes procur est aliment par une batterie au lithium-ion. Pour des renseignements sur le recyclage de la batterie, veuillez composer le 1-800-8-BAT-
TERY. When Using Peripheral Devices Pay strict attention to the following points to avoid damage to the computer, peripheral de-
vices, cables, etc. Also, in addition to following this manual, carefully read the instruction manuals for the peripheral devices being used. Use only peripheral devices that conform to the computers specifications. Connect the devices properly, paying close attention to the condition and position of the connectors. If a connection cannot be made easily, do not apply undue force; check once more to confirm the condition and position of the connector (alignment of pins, etc.). If the connector has holding screws, fasten the screws firmly. Do not carry the computer with cables attached, and do not pull on the cables forcefully. 7 Whats in the Box?
Make sure the parts shown in the figure have been supplied. If any of these items is missing or is not working properly, contact Panasonic Technical Support. Make sure the provided stylus has been stored to the computer (
page 19). AC Adaptor ....................................... 1 AC Cord .......................................... 1 Model No:CF-AA1623A Battery Pack ..................................... 1 Cradle ............................................... 1 R ELE A S E Model No: CF-VZSU28 Model No: CF-VEBP12 C F-V E B P1A Strap ........................... 1 Operating Instructions .. 1 Companion CD*1
.......................... 1
(see below)
(this book)
*1You can use the Companion CD to install various software, including MicrosoftOutlook 2002 and MicrosoftActiveSync (
Attaching the Strap page 33). 2 4 CAUTION The strap has been designed to carry only the weight of the computer. Therefore, be sure that the strap does not carry a weight that exceeds the weight of the computer. The strap may accidentally come loose from the computer. Do not use a strap that is damaged or about to tear. 1 3 8 Names and Functions of Parts The illustrations shown may differ from the actual physical appearances. Depending on built-in card or modules, some models have a different shape (e.g., barcode scanner). For de-
tails, refer to the attached Supplementary Instructions.
(These cards and module cannot be changed.) LCD (Touchscreen)
page 20) Cursor Control
page 10) Program Buttons By pressing a program button (F1, F2, F3 and F4), the program as-
signed to the button is started up. (
page 27) LED Indicators
*1 Available on specific models.
*2 Can be set to not light up(
Supplementary Instructions) page 37).
*1*2 (
*1*2 RF Module Power Notification/*1 Message-In Indicator Battery Indicator Green: Fully-charged Orange: Charging in progress Not lit: Charging not being performed or AC adaptor not connected Stylus
page 19) Receiver SD Memory Card/
MultiMedia Card Slot
page 29) Power Switch Infrared Communication Port
page 35) Internal Microphone For detailed settings, tap
- [Set-
tings] - [System] tab - [Panasonic Set-
tings]. (
page 37) Keyboard
(QWERTY key type)
page 23) LED Indicators Numeric key lock Caps lock
< For the CF-P1P1 series >
The keyboard is of the numeric keypad type. There are no LED indicators
Caps Lock). Numeric key lock and Keyboard
(numeric keypad type)
page 25 ) 9 Names and Functions of Parts Strap Attachments
page 8) Speaker To adjust the volume, tap
- [Settings] - [Per-
sonal] tab - [Sounds & Notifications] - [Volume]
tab. Battery Pack
pages 12 and 28) Headset Jack Use this connector to connect a headset or a 3.5 DIA plug adaptor (
pages 11). Audio output from the internal speaker is disabled when the headset or the 3.5 DIA plug adaptor is con-
nected. Reset Switch
page 39) DC-IN Jack Expansion Connector Set the computer into the cradle (included)
next page). Or, you can connect the com-
puter directly to the computer using the proper cable (
page 34). Cursor Control Using the cursor control, the following operations can be performed. Push Operation:
Executes a selected item from a menu, or a selected icon. For example, after an item within a menu is selected, the cursor control can be pushed to execute this selected item. Move Up/Down Right/Left Operations:
Performs the same function as the up/down left/right cur-
sor keys. For example, the Move Up operation can be performed to select an item towards the top within a menu. Changing the Cursor Control Settings The cursor control settings allow you to adjust the interval between the waiting time until the repetition of an input begins (from the first input to the second input) if the cursor control is held down, and the repeat of the input (from the second input and on). 1 Tap
- [Settings] - [Personal] tab - [Buttons] - [Up/Down Control] tab. 2 Customize the way your cursor control repeats. 3 Tap [ok]. 10 Headset and 3.5 DIA plug adaptor Only the CF-VHSP11W (sold separately) can connect to CF-P1s headset jack. CF-VHSP11W includes A and B. When using a 3.5 DIA plug, B is required. This adaptor can be connected to stereo headphones. A. Headset B. 3.5 DIA plug adaptor Front
*1Answer switch Back Microphone 3.5 DIA plug
*1Press for about one second to answer/
hang up voice calls. Function will not operate if the switch is not pressed long enough. Connecting/Removing the Cradle Connecting the Cradle Connect the cradle after removing the AC adaptor from the computer and closing the DC-IN Jack Cover. DC-IN Jack Cover The AC adaptor is con-
nected to the position shown by the arrow in the figure. Only the provided adap-
tor can be used. DC-IN Jack Removing the Cradle 1 Press the release lever. 2 While firmly holding the cradle and pressing down on the release lever with one hand, lift the computer up with the other hand. Release Lever E E S A E L E R F - V C A 1 P B 2 1 E E S A E L E R F - V C A 1 P B 11 First-time Operation 1 Install the battery pack.
(1) Power off your computer and turn it over.
(2) Press position (A) to depress the battery pack cover and then slide the latch, and remove the battery pack cover. NOTE If the attached strap makes it difficult to remove the battery pack cover, unbuckle the strap and then re-
move the cover.
(3) Set the arrow mark of the battery in the direction shown in the figure, and then insert the battery pack into the battery pack compartment. Battery Pack Cover Latch
(A) Arrow Mark
(4) Align the projecting part of the cover with the hole, at-
tach the cover at an angle, and then set the cover on the body. Press position (A) to depress the battery pack cover and then slide the latch to lock the cover.
(A) NOTE After attaching the battery pack cover, slide the latch all the way to the left so that CF-P1 can turn on after the power switch is pressed. Latch 2 Connect your computer to a power outlet. When the AC adaptor is connected to the computer, charg-
ing begins automatically. Charging Time: Approx. 3 hours This computer is equipped with a memory backup battery which automatically charges from the fully-charged lithium-
ion battery (main battery). This backup battery retains data in memory when the lithium-ion battery is removed, and takes 36 hours to charge when you first use this computer. 12 NOTE When the backup battery or main battery becomes low, some alert messages and icons will be displayed. (
pages 16) CAUTION Do not remove the main battery before the backup battery is fully charged. Other-
wise, data in RAM will be lost. Take care to ensure that the remaining power in the main battery and the backup battery never discharges completely. When any remaining power discharges completely, the computer will no longer function properly, and the computer powers off automatically. Connect the AC adap-
tor and recharge the battery. If the computer is left for 72 hours or more without recharging, the computer may be fully reset. When the computer is fully reset, all user-added data will be deleted. The computer will be returned to the condition at the time of purchase. After the cover is closed, press down firmly on the cover and confirm that the cover is locked. Handling the AC adaptor Do not twist or pull the AC power cord forcefully. Doing so may damage the connections. Use only the provided AC adaptor with your computer. Using an AC adaptor other than the one provided might damage the battery and/or the computer (
pages 8). When the DC plug is not connected to the computer, disconnect the AC cord from your AC wall outlet. Problems such as sudden voltage drops may arise during periods of thunder and lightning storms. Since this could adversely affect your computer, an uninterruptible power source (UPS) is highly recommended unless the battery pack is installed. 13 First-time Operation 3 Turn your computer on
(1) Using the provided stylus, push the center of the reset switch straight in for 1 second. If the DC-IN Jack's cover makes it difficult to push the reset switch, push the cover in a little as you push the switch. Reset Switch CAUTION Use only the stylus provided to push the reset switch. Do not push the reset switch with any other sharp-pointed objects, i.e. pencils, and ball point pens. The reset switch or other parts may become damaged.
(2) Tap the screen to set up your Pocket PC. The Windows*1 alignment screen is displayed.
*1 This computer uses Microsoft Windows MobileTM 2003 software for Pocket PC.
(3) Align the touchscreen.
(For alignment, tapping operations are required. For information on tapping, refer to page 20.)
"+" is displayed in the center, upper left, lower left, lower right, and upper right portions of the screen, in that order. Each time the
"+" mark is displayed, tap the center of the "+" mark with the stylus.
(4) At [complete], tap the screen to begin using CF-P1. 4 Set the time and date
- [Settings] - [System] tab - [Clock].
(1) Tap
(2) Set the time and date.
(3) Tap [ok]. NOTE You can also set the time and date by tapping on [Today] screen. This concludes the first-time use operation guidelines. 14 Starting Up/Shutting Down Starting Up (from the second time) Lightly press the power switch once. A program or file that was previously displayed appears on your screen. Power Switch OFF ON Power Switch Lightly press the power switch (for less than 0.5 seconds). Leave an interval of at least 10 seconds between turning the computer off and on. To turn the backlights on/off:
Press the power switch until the LCD backlight and keyboard backlight go on/off and release the switch. At the time of purchase, the setting of the keyboard backlight is off. To turn the keyboard backlight on, refer to page 21. NOTE When the backlight is on, more power is consumed, and the shortening of the operating time is accelerated. 15 Starting Up/Shutting Down The Navigation Bar and Command Bar The navigation bar is located at the top of the screen. It displays the active program and current time, and allows you to switch to programs and close screens. Use the command bar at the bottom of the screen to perform tasks in programs. The com-
mand bar includes menu names, buttons, and the input panel button. Status Icon (
below) or may be displayed depending on the program that is running. Tap to quickly select a program you have recently used. Tap to select a program. Tap to see additional programs. Tap to customize CF-P1 (
page 36-38). New Button Input Panel Button Following are some of the status icons you may see. Status Icon & Meaning Menu Names Buttons
(Example for [Notes]) Turn all sounds on and off Connection is active Backup battery is very low Synchronization is occurring Main battery is charging Connection is not active Main battery is full Main battery is low Main battery is very low
*1
*1 This icon differs depending on model. Notification that one or more instant messages were received Notification that one or more e-mail messages were received More Notification icons need to be displayed. Tap the icon to view all. 16 Today Screen Youll see the Today screen when you turn on the computer for the first time each day (or after 4 hours of inactivity*1). You can also display it by tapping
- [Today]. On the Today screen, you can see at a glance important information for the day.
*1 To change the setting, tap
- [Settings] - [Personal] tab - [Today] - [Items] tab. Tap to switch to a program. Tap to change date and time. Tap to open an item. Your day at a glance. Tap to create a new item. Tap to view connection status. 17 Starting Up/Shutting Down Pop-up Menus With pop-up menus, you can quickly choose an action for an item. For example, you can use the pop-up menu in the contact list to quickly delete a contact, make a copy of a contact, or send an e-mail message to a contact. The actions in the pop-up menus vary from program to program. To access a pop-up menu, tap and hold the stylus on the item name that you want to perform the action on. When the menu appears, lift the stylus, and tap the action you want to perform. Or tap anywhere outside the menu to close the menu without performing an action. Tap and hold to display the pop-up menu. Lift the stylus and tap the action you want. Tap outside the menu to close it without performing an action. Shutting Down (power off) Lightly press the power switch once (within 0.5 seconds). CF-P1 shut down is the same as the suspend state of a com-
puter. (Suspend state is a function allowing you to turn off the power without closing applications. The settings be-
fore the power was turned off are stored in the memory, so when the power is turned back on, the screen is the same as it was before the power was turned off (the same applica-
tions and files are opened) and you can start working im-
mediately.) Power Switch CAUTION Check that the SD memory card/MultiMedia Card is not being accessed before turning off the power. If the power is turned off while the card is being accessed, the data stored on the card may be damaged and the computer may stop working properly. 18 LCD (Touchscreen) Using the Stylus Use the stylus provided to perform operations on the touchscreen. The stylus is located in the stylus holder at the upper right of the computer, and can be held like a pen or pencil. The following operations are possible on the touchscreen. Tapping Dragging You can select an item on the screen by tapping it with the stylus. This operation is called a tap. You can drag on item on the screen by holding the stylus down over the item and then moving the stylus. This operation is called a drag. Tapping and Holding You can tap and hold the stylus on an item to see a list of actions available for that item. On the pop-up menu that appears, tap the action you want to perform. Handling the Stylus Clean the stylus tip and screen prior to operation. Foreign particles can scratch the screen and impede the operation of the stylus. Use the provided stylus only on the screen. Using it for any other purpose may damage the stylus and scratch the screen. 19 LCD (Touchscreen) Handling the Touchscreen Use the provided stylus with CF-P1. Do not use an implement other than the stylus that comes with the computer. Do not place any object on the surface or press down forcefully with sharp-pointed objects
(e.g., nails), or hard objects that can leave marks (e.g., pencils and ball point pens). Do not operate the computer when such things as dust are on the LCD. Do not allow substances such as oil to contact the LCD. The cursor may not work properly in such cases. Aligning the Screen Align the screen if the cursor does not correctly move to the position where the stylus touches the screen of the computer. 1 Tap
- [Settings] - [System] tab - [Screen]. 2 Tap [Align Screen]. 3 "+" is displayed in the center, upper left, lower left, lower right, and upper right portions of the screen, in that order. Each time the "+" mark is displayed, tap the center of the "+" mark with the stylus. The alignment procedure is executed after the five
+ marks are touched. NOTE
<For the CF-P1P3 series>
You can also display the alignment screen when pushed.
<For the CF-P1P1 series>
You can also display the alignment screen when PF (PF key) + the cursor control are pushed.
(Mode key) + the cursor control are 20 Backlight Setting Adjust the LCD Brightness Screen brightness can be adjusted in accordance with the usage conditions. 1 Tap
- [Settings] - [System] tab - [Backlight]. 2 Tap the [Brightness] tab and adjust the brightness with the slider. 3 Tap [ok]. LCD Backlight ON/OFF Press the power switch until the LCD backlight goes on/off after the computer is turned on and release the switch. Setting of the LCD Backlight and Keyboard Backlight The LCD backlight and keyboard backlight can be set to switch off automatically (e.g., for conserve power) by setting the timeout function. Individual settings can be made for battery use and AC adaptor use. 1 Tap
- [Settings] - [System] tab - [Backlight]. 2 Battery use setting:
Tap the [Battery Power] tab. AC adaptor use setting: Tap the [External Power] tab. Add a check mark so that when the device is not oper-
ated, the LCD backlight switches off automatically when the timeout expires. Timeout Add a check mark so that tapping the screen turns the LCD backlight on.
(Example for [Battery Power]) Add a check mark to turn the keyboard backlight on when the LCD backlight turns on. 3 Tap [ok]. 21 Entering Information You can use the following options to enter information:
Use the keyboard to input the number, character*1 or symbol*1 shown on the key top. Use the input panel to input typed text, either by using the soft keyboard or other input method. Write directly on the screen.*2 Draw pictures on the screen.*2 Speak into the internal microphone to record a message.*2 Use Microsoft ActiveSync to synchronize or copy information from a host computer to CF-P1. For more information on MicrosoftActiveSync, see ActiveSync Help on the host computer (
page 33).
*1 Only for the CF-P1P3 series.
*2 For more information, tap
- [Help] - [Settings] - [Input]. Using the Input Panel Use the input panel to enter information in any program on CF-P1. You can either type using the soft keyboard or write using Letter Recognizer, Block Recognizer, or Transcriber. In either case, the characters appear as typed text on the screen. To show or hide the input panel, tap the input panel button. Tap the arrow next to the input panel button to see your choices. Select an input method Input Panel Button Tap to see your choice Tap [123] to allow the keyboard to input $,
{}, %, etc. To type with the soft keyboard:
(1) Tap the arrow next to the input panel button and then [Keyboard].
(2) On the soft keyboard that is displayed, tap the keys with your stylus. NOTE If the keyboard is used while the soft keyboard is open, the soft keyboard will close. 22 Using the QWERTY Keypad Type Keyboard <For the CF-P1P3 series>
2 1 3 Q W E
D
S
Z
X NUM 0 P 9 O
L 4 R
F
) C 5 T
G
V 6 Y
H
B 7 U
J
, N SPACE 8 I
K
. M C A P OK Key DEL(Delete)/
Backspace Key Enter Key TAB Key CAP Key
/SPACE Key Alphabet Keys ESC Key Mode Key NUM Key Mode Key A symbol or number on the key top is input by pressing the Mode key (the numeric key lock indicator goes on) followed by the corresponding alphabet key. Each Mode key press works for the input of only one symbol or number. This is convenient when using one hand to input sentences including symbols/numbers. Example: To input abc.def., press the keys in the following order. A B C M D E F M
. To input only symbols or numbers on the key top, keep holding down this key while inputting symbols or numbers. This key is also for inputting accented letters, using [ESC]key and [DEL]key. For more details, see the explanation of each keys. NUM Key Each time the Mode key + NUM key are pressed, the mode changes from the alphabet input mode (default) to the symbol/number input mode, and vice versa. In the symbol/
number input mode (numeric key lock indicator on), the symbols and numbers on the key top can be inputted continuously. To exit the symbol/number input mode, you can also choose to press only the NUM Pressing this key once and pressing an alphabet key can be input the capital letter. key.
/SPACE Key Pressing this key inserts a space. Pressing the Mode key + /SPACE key input accented letters after inputting the corre-
sponding alphabet key. Example: To input or , press the keys in the following order. A
Hold down the Mode key and press the /SPACE key repeatedly if necessary, until the desired character appears.
SPACE SPACE SPACE SPACE A 23 Entering Information CAP Key This key is used for inputting capital letters. Each time the Mode key +
CAP key are pressed, the mode changes from the standard
(non-caps) input mode to the caps lock mode, and vice versa. In the caps lock mode (caps lock indicator goes on), capital letters can be inputted continuously.
(When both the numeric key lock indicator and caps lock indicator are on, priority is given to the symbol/number input mode.) Inputting non-capital characters in the caps lock mode:
Press an alphabet while also holding down on the NUM Pressing this key once and pressing an alphabet key can be input the capital letter (like the NUM key). key. Enter Key This key works the same as the Enter key of a computer, e.g., line feed in a document, and to select icons and items from menus, etc. DEL (Delete) /Backspace Key This key works the same as the Backspace key of a computer. If pressed the Mode key + DEL/Backspace key, this key works the same as the Delete key of a computer. TAB Key This key works the same as the Tab key of a computer. OK Key This key works the same as the tapping [ok] on the screen. ESC Key If pressed with Mode key, this key works the same as the Esc key on a computer. 24 Using the Numeric Keypad Type Keyboard <For the CF-P1P1 series>
Press a key to input the number shown on the key top. The keys can also be used as function keys. (See "PF key" below.) PF Key indicator PF Key Minus Key CLR (Clear) Key Period Key PF Key:
Minus Key:
CLR (Clear) Key:
Period Key:
ENT (Enter) Key:
PF
CLR 1 4 7
. 2 5 8 0 A B BS 3 6 9 ENT OK Key A Key B Key BS (Backspace) Key ENT (Enter) Key Number Keys
.) indicator turns off. To turn it once, then press a number key. is pressed and the PF key indicator is turned on (function When key mode), the functions assigned to the each number key are activated when the corresponding keys are pressed.
(The functions assigned to the number keys differently depending on the application.)
- To use the function key mode only once:
Press
(You can also press the number key while pressing Once the number key is pressed, off without pressing a number key, press
- To use the function key mode continuously:
Press keys. Press You can also assign these keys to the program. For detailed set-
tings, see the next page. Press this to input a "-". The function differently depending on the application. When pressed, a period (".") is input. This key works the same as the Enter key of a computer, e.g., line feed in a document, etc. twice to lock the function key mode, then press the number once to unlock the function key mode. twice. BS (Backspace) Key: This key works the same as the Backspace key of a computer. A/BKey:
OK Key:
These operate as function keys. You can also assign these keys to the program. For detailed set-
tings, see the next page. This key works the same as the tapping [ok] on the screen. 25 Entering Information Assigning of Programs <Only for the CF-P1P1 series>
Customize the keys to open your most used programs. 1 Tap
- [Settings] - [System] tab - [Panasonic Settings] - [Buttons] tab. 2 Choose each setting.
(1)Tap one item.
(2)Tap under [Button assignment] and select a pro-
gram from the list. When selecting [None], the button assignment in the list shown above will be none. When selecting [(...Free command)], [Open] will be displayed (See below).
(3)Tap and select a folder and type of files. The following functions are assigned to the keys at the time of purchase:
PF+6 - Volume up, PF+7- Volume down The assignment of those keys can be changed. 3 Tap [ok]. 26 Program Buttons The F1, F2, F3 and F4 buttons are called pro-
gram buttons. If either of the program but-
tons is pressed after the computer has started up, the program assigned for that button is started up. Start Menu Context Menu 2 1 3 Q W E
4 R 5 T 6 Y 7 U 8 I 0 P 9 O
Program Buttons Changing the Assignment of a Program Button Programs are assigned to the program buttons at the time of purchase. F3 - Start Menu, F4 - Context Menu You can change the assignment of the program buttons following the procedure. 1 Tap
- [Settings] - [Personal] tab - [Buttons]. 2 Choose each setting.
(1)Tap one button.
(2)Tap under [Button assignment] and select a pro-
gram from the list. If the [Restore Defaults] is tapped, the assignments will return to the default settings. 3 Tap [ok]. Resuming with a Program Button You can resume the computer with one of the F1, F2, F3 and F4 buttons. 1 Tap
- [Settings] - [System] tab - [Panasonic Settings] - [Wakeup]*1 tab.
*1 To display the hidden tab, tap the on the right edge of the tab. 2 Add a check mark to resume when the program button is pressed. 3 Tap [ok]. 27 Battery Power Remaining Battery
- [Settings] - [System] tab - [Power]. Tap The remaining battery charge is displayed. When the Remaining Battery Charge Becomes Low Plug in the AC adaptor, and fully charge your battery. Use a spare battery if you have one. If you have neither the AC adaptor nor a spare battery, power off your computer. Replacing the Battery Pack When the charge provided by your battery pack is supplied for only a short period of time, even after full charging according to the instructions, it may be time to replace your battery pack. The battery pack is a consumable item and therefore requires replacement (CF-VZSU28W). CAUTION Ensure that the backup battery is fully charged before replacing the battery pack and replace the battery pack within 5 hours; otherwise the data in RAM will be lost. Do not touch the terminals of the battery pack. The battery pack may no longer function properly if the contacts are dirty or damaged. Do not expose the battery pack to water, or allow it to become wet. The battery pack is not charged when CF-P1 is first purchased. Be sure to charge it before using it for the first time. When the AC adaptor is connected to CF-P1, charging begins automatically. Use only the specified battery pack (CF-VZSU28W) with CF-P1. Do not install or remove the battery pack while CF-P1 is on. Battery Pack Cover Latch
(A) Remove the battery pack
(1) Turn off your computer and wait for 30 seconds.
(2) Turn your computer over.
(3) Press position (A) to depress the battery pack cover and then slide the latch, and remove the battery pack cover. NOTE If the attached strap makes it difficult to remove the battery pack cover, unbuckle the strap and then re-
move the cover.
(4) Remove the battery in the direction shown in the figure. Install the battery pack
(1) Refer to page 12 about installing the battery pack.
(2) Turn your computer on.
(3) Save the unsaved data and push the reset switch. 28 SD Memory Card/MultiMedia Card An SD memory card/MultiMedia Card can be used for the following purposes. The exchange of data with various devices equipped with an SD memory card/MultiMedia Card slot, audio storage, and so on. NOTE Software (e.g., drivers) required to exchange data with these devices. (Refer to the instructions manual provided with each SD compatible peripheral device.) Use as a memory card (e.g., use as a storage unit on which files can be written). Inserting/Removing an SD Memory Card/MultiMedia Card 1 Open the SD memory card/MultiMedia card slot cover. 2 Inserting Slide the card in until it snaps into place as shown in the illustration. Make sure the labeled face of the SD memory card/
MultiMedia card is towards the front of the computer and then firmly insert the card. If you mistake the back side of the card with the top surface side, the card cannot be in-
serted all the way into the slot. Do not insert the card at an angle. Insert the card all the way into the slot. SD Memory Card/
MultiMedia Card Slot Removing
(1) Press the card. It will come out slightly.
(2) Remove the card. 3 Close the SD memory card/MultiMedia Card slot cover. CAUTION Before removing an SD memory card/MultiMedia card or powering off CF-P1, check to see if CF-P1 is trying to access the card. Such accesses are done intermittently for a short period of time. Be sure to remove the card or power off CF-P1 only after confirming that CF-P1 is not trying to access the card. If the card is removed or CF-P1 is powered off during an access attempt, valuable data may be lost or CF-P1 may fail to work properly. 29 Panasonic Backup Using the backup function, you can back up data from the CF-P1 RAM to an SD memory card, MultiMedia card, CF card or ROM option area, or restore data backed up on those storage area to the CF-P1 RAM. CAUTION Do not do the following during the procedure:
Touching the power switch Disable the connection with the host computer, for example by disconnecting the cable. Confirm that battery remaining is at least 50%, disable all power management, and stop any other programs that may be running. The data in [Inbox] cannot be backed up. If necessary, Use MicrosoftActiveSync to backup. Performing any keyboard and touchscreen. NOTE Backup processing cannot be executed manually during Auto Backup or Auto Restore. We recommend that each media be formatted as shown below when backing up. SD MMC CF/ROM option area SD Format (use SD Formatter) FAT16 not required. Manual Backup 1 Reset CF-P1 (
2 When backing up to an SD memory card, insert page 39). the SD memory card. 3 Tap
- [Programs] - [Panasonic Backup] -
[Backup] tab. 4 Tap to select the storage area to back up the data. 5 Tap [Backup Start]. 6 Input the Backup file name. Add a check mark for [Set Password] and set a pass-
word if required. 7 Tap [OK]. Follow the on-screen instructions. The progress screen will be displayed. To stop the op-
eration, tap [Abort]. Backup successful will be displayed when the backup is complete. Tap [ok]. 30 Auto Backup
- [Programs] - [Panasonic Backup]. 1 Tap 2 Tap [Tools] on the command bar and select [Auto Backup Settings]. 3 Tap [File] tab.
(1) Tap
(2) Change the settings in [Settings]. to choose the storage area for auto backup. If the ROM option area is chosen, some settings cannot be changed. CAUTION If there is a check mark in [Stop other application before backup], some appli-
cations currently being executed may not be shut down properly. 4 Tap [Schedule] tab.
(1) Add a check mark for [Scheduling backup].
(2) Set the time and day to back up at [Backup Schedule]. CAUTION If you want to make settings immediately after copying a file of 10 MB or more and then turn off the computer soon after that, wait for about one minute before turning off the computer. Tap [Battery] tab if required. Add a check mark for [Backup when battery is low.] and set the threshold. NOTE If power is off, the amount of battery power remaining cannot be checked so that this function cannot work. Tap [Password] tab if required. Set password for backup files. 5 Tap [ok]. Auto Restore 1 Full reset CF-P1(
page 39 step (1) - (4)).
[Panasonic Backup] screen will be displayed. 2 Select a file for restore, and tap [OK]. If a password has been set, a message will be displayed. Enter the password and press [OK]. Restore will start. The progress screen will be displayed. When the re-
store is complete, CF-P1 resets automatically. 31 Pocket Internet Explorer You can connect to Internet service provider (ISP), and use the connection to send and re-
ceive e-mail messages and view Web or WAP pages. Getting Connected The settings will vary for different network environments. Ask your system administrator or the person in charge of the network and make settings using the followings.
(1)Tap
(2)Set up or change connection information
- [Settings] - [Connections] tab - [Connections] in order. On the [Tasks] tab:
(1) Tap one of the followings:
Add a new modem connection (My ISP) Add a new modem connection (My Work Network) Add a new VPN server connection (My Work Network) Set up my proxy server (My Work Network)
(2) Enter the necessary information. On the [Advanced] tab:
Tap [Select Networks], [Select Location] or [Network Card] and set up if required. For details, tap
- [Help]. To run Pocket Internet Explorer Tap
- [Internet Explorer]. Favorites Button Home Button Refresh Button 32 Connecting to Your Computer Use MicrosoftActiveSync to synchronize a host computer and CF-P1 information, to trans-
fer files between a host computer and CF-P1, or to backup and restore data. CAUTION To ensure that synchronization functions properly, install MicrosoftActiveSync 3.7 before connecting CF-P1 and the host computer for the first time. The following methods can be used to connect the CF-P1 with a host computer. The use of a Serial Cable or USB Cable. The use of the infrared communication port. Use an RS-232C Cable or a USB Adaptor Cable to connect CF-P1 with a peripheral. Installing ActiveSync 1 Set the Companion CD into the host computer. The opening screen is displayed automatically. When the opening screen is not automatically displayed In [Start] - [Run], input [x:\setup] and select [OK].
(x is the drive letter. You can change the letter to suit your preference.) 2 Select button. 3 Select [Start Here]. 4 Select [Install ActiveSync x.x*1] and read the on-screen instructions and select [Install]. 5 At [Installation Message], select [OK].
[File Download] will be displayed. This screen varies depending on the host computers software (e.g. Internet Explorer version). If [Open] is displayed on [File Download], select [Open]. If [Run this program from its current location] is displayed on [File Download], select it and then select [OK]. 6 At [Microsoft ActiveSync], select [Next]. 7 At [Select Installation Folder], select [Next]. 8 At [Get Connected], read the on-screen instructions and connect the CF-
P1 with a host computer.
(Refer to page 34 to connect the CF-P1 with a host computer.) For details, select [Microsoft ActiveSync x.x*1 Help] during the installation.
*1 The version is shown. 33 Connecting to Your Computer 9 At [Set up a Partnership], select the partnership and select [Next]. NOTE To change the synchronization settings, tap, in order,
- [ActiveSync] - [Tools] -
[Options...]. Be sure to disconnect the cable when changing the synchronization set-
tings. Disconnect and connect the cable again if communications do not start. For information about the MicrosoftActiveSync, refer to the MicrosoftActiveSync Help. CAUTION While performing communications, avoid the following:
Connect/disconnect the cable. Remove the computer from the cradle. Turn on/off the computer. When Connecting the CF-P1 Directly with a Computer Use a Connector Protector (optional: CF-VCCP11U) to connect CF-P1 with an external device firmly. Expansion Connector of the CF-P1 USB Autosync Cable or Serial Autosync Cable Removing 34 When Connecting the CF-P1 with a Computer via the Cradle Expansion Connector of the Cradle Removing or Using the Infrared Communication Port By using the infrared communication port, data can be exchanged with-
out a physical connection (e.g., using a cable or the cradle) between the CF-P1 and a host computer. Position CF-P1 so that the infrared communication port is face-to-face with the port of a host computer. Have the infrared port of the CF-P1 face the infrared communication port of a host computer. We recommend a port to port distance of 30 cm {11.8"} or less. Infrared Communication Port 35 Customizing the Computer If you want information on the various individual settings of the computer, tap tings] and then tap the item (icon) you want to check.
(For details, tap
- [Help] - [Settings].)
- [Set-
Personal Buttons Program buttons and the cursor control settings. Input Input panel (soft keyboard or letter recognizer, etc.) settings. Menus Select programs to be displayed in in the Today screen.
, or items to be displayed in [New]
Owner Information Registration (or changing) of the users (owners) personal information. You can choose to display the registered owner information on the screen when CF-P1 is turned on. Password Password enable/disable, and a password hint setting. If a password is set, it has to be inputted in order to open the password screen. When the wrong password is inputted four times, the set hint is displayed. At times certain characters, such as and , cannot be input from the keyboard. Use the soft keyboard. Sounds & Notifications Volume setting and operation sound setting. Specific sound settings to be generated in a wide range of situations. Today Desktop display setting. About Display of release version and copyrights, and device ID setting. Backlight LCD backlight timeout function, tap-induced backlight on and keyboard backlight setting, and LCD brightness adjustment. System 36 Certificates Add and delete personal certificates and root certificates. Clear Type Tuner Make a text clear by moving the slider. Clock Time/date settings and alarm settings. CPU Clock Change the operating speed of the processor. Memory Computer memory assignment possible (assignment of memory for data memory and memory for program execution). Display of total storage card memory if it is installed. Activate or stop the running programs. Option Devices Add a check mark in a box to activate CF card and RF module when the power is off*1, and make Wireless LAN card*1 on/off setting. To set to not light up LED indicators*1, remove the check mark at the [Use LED to indicate RF module status].
*1 Available on specific models. Panasonic Settings
[Version] tab: Display of ROM release version, the size of ROM option area, UUID and available devices*2.
*2 Available on specific models.
[Record] tab: When a check mark is added at [Mix playsound], both play sound and microphone sound can be recorded. When the check mark is removed, only microphone sound can be recorded. (When us-
ing the telephone, both play sound and microphone sound will be recorded regardless of whether or not this check mark is turned on.) Select either [Use ALC (Automatic Level Control)] or [Manual] and move the slider to adjust the record gain level.
[Phone] tab: Add a check mark for [Speaker phone] to use with the speaker phone when using the telephone. Add a check mark for [Enable built-in microphone with Headset/Head-
phone] to use Headset/Headphone, using built-in microphone.
[Charging Mode] tab (
[Wakeup] tab (
[Buttons] tab (only for CF-P1P1 series) : Change the assignment of a program keys.(
page 27) page 26) page 6) 37 Customizing the Computer Power Current battery charge status, the wireless signals on/off settings and automatic power off time setting. Regional Settings Display methods of the region, number system, currency, time, and date. Remove Programs Remove programs in storage memory. Screen Touchscreen alignment (
page 20), ClearType setting. Connections Bluetooth (Only for the Bluetooth model) The Bluetooth radio turning on or off settings. The device discoverable setting. Beam Enable or disable the function for receiving data via infrared communi-
cation. Connections Internet connection and Intranet connection settings (
page 32). Wireless Ethernet (Only for the wireless model) The wireless ethernet settings. Wireless LAN Settings (Only for the wireless LAN model) The wireless LAN settings. 38 Dealing with Problems Resetting Your Computer When the computer fails to respond to an operation, reset your computer. There are two methods for resetting the computer. CAUTION Use only the provided stylus to push in the reset switch. Do not push the reset switch with any other sharp-pointed objects, i.e. pencils, and ball point pens. The reset switch or other parts may become damaged. Reset Switch Performing a Reset This selection saves all stored records and entries and then restarts the computer. Unsaved data in open windows may be lost. If possible, turn off the computer and push the center of the reset switch straight in. Push the reset switch within 1 second using the stylus. Resetting the computer may cause the clock to malfunction. After resetting the computer, check the time and correct the clock settings if necessary. Performing a Full Reset This selection erases all stored records and entries and then restarts the computer. Therefore, never perform a full reset unless a reset does not solve your problem.
(1) Using the provided stylus, push the center of the reset switch straight in for 1 second while holding down on the power switch.
(2) Tap the screen to set up your Pocket PC. The Windows alignment screen is displayed.
(3) Align the touchscreen (
(4) At [complete], tap the screen to begin using CF-P1.
(5) Set the time and date. page 20 step 3). Tap
- [Settings] - [System] tab - [Clock] to set the time and date, and tap [ok]. 39 Dealing with Problems Troubleshooting Starting Up CF-P1 does not turn on. Or, there is no display when CF-P1 is turned on. The date and time are in-
correct. CF-P1 shuts down automati-
cally. The data cannot be copied. Alarm and Auto backup do not operate according to set-
tings. 40 Latch Check to see if a fully charged battery pack is properly installed. The power does not go on unless the AC adaptor is con-
nected:
The battery level is too low. Charge the battery with the AC adaptor. (Make sure that the battery never discharges completely and that it is charged periodically.) Push the reset switch to restart CF-P1. Slide the latch to lock the battery pack cover all the way to the left. If the power does not turn on when the above operations are performed, the battery pack must be replaced. You can set the date and time through [Clock] in
- [Settings] - [System] tab. If you continue to experience problems, the backup battery maintaining the clock may need to be replaced. Contact Panasonic Technical Support. This computer will not correctly recognize the date and time starting from the year 2085 A.D. The battery level may be too low. If the battery level goes below a certain threshold, CF-P1 automatically shuts down. In such cases, connect the AC adaptor and charge the battery. The computer may have entered a locked state. If this is the case, connect the AC adaptor and push the reset switch. Check the remaining battery level and make sure that multiple applications are not running simultaneously. Close all applications that are not being used. The computer may be turned off automatically while the data is being copied by beams or when using File Ex-
plorer. To prevent this, change the time setting to a longer time in
- [Settings] - [System]tab - [Power] -
[Advanced]tab. It is possible that settings were made immediately after a file of 10 MB or more was copied, and that the power was turned off soon after that. In this case, the power should be turned off after waiting for about one minute. Application Software The computer locks up dur-
ing the execution of an ap-
plication, or the execution speed becomes noticeably slower. Display It is hard to view the LCD. The cursor cannot be con-
trolled. The cursor does not prop-
erly correspond to a stylus tap. Connecting a Host PC A host computer does not recognize CF-P1. Connecting Peripherals Peripheral is not recog-
nized even after driver is installed. Network Cannot connect to the net-
work. Connect the AC adaptor and push the reset switch. Check the remaining battery level and make sure that multiple applications are not running simultaneously. Close all applications that are not being used. The LCD backlight may have automatically turned off due to the power-saving function. Turn on the LCD back-
light by holding down the power switch until the back-
light goes on. Adjust the backlight brightness. 1 Tap 2 Tap the [Brightness] tab and adjust the brightness with
- [Settings] - [System] tab - [Backlight]. the slider. Push the reset switch to restart. Align the screen (
page 20). Confirm that MicrosoftActiveSync 3.7 (or a later ver-
sion) has been installed in the host computer. Check to see if a fully charged battery pack is properly installed to CF-P1. If a modem card has been inserted, disconnect these de-
vices and check the communication status again. Confirm that CF-P1s power is on. Push the reset switch to restart. If a cable or cradle is being used for the connection, recheck the connection to the host computer. Remove cards or other peripherals, and push the reset switch. Check the server information and network settings. 41 Dealing with Problems Sounds Quality of recorded sound is poor. Play sound is recorded even though the Mix playsound checkmark is off. Noise in recording or play-
back sound.
- [Settings] - [Personal] tab - [Input] - [Options] tab Tap
- [Voice recording format], and select a higher frequency. Playsound (sound from the speaker) is being picked up and recorded by the microphone. If you want to avoid playsound recording completely, connect the headset or the headphone. If a load is applied during recording or playback, for example when the SD memory card is disconnected or connected, then noise in the recording or playback will result. In this event, stop the recording or playback, and restart after closing other applications. Character Input < Only for CF-P1P1 series >
Entering characters Characters can be input using the input panel.
page 22) 42 For Effective Use Maintenance LCD Avoid using water when cleaning the panel. Ingredients included in water may leave residue and reduce readability of the screen.
<When cleaning dust/dirt>
Avoid rubbing off dust/dirt with cloth since it may leave scratch on the screen. Sweep dust/dirt with fine brush, then wipe it with dry soft cloth used for cleaning glasses.
<When cleaning oily surface>
Apply camera lens cleaner on a soft gauze and clean it with gentle force. Then, wipe with dry soft cloth used for cleaning glasses. Areas excluding the LCD Wipe these areas with a soft cloth, after applying water or detergent diluted with water to the soft cloth and firmly wringing out excess water. CAUTION Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect the surface, e.g., discoloration. In addition, do not use commercially-available household cleaners and cosmetics, as they may contain components harmful to the surface. Do not directly add or spray water or detergent. If liquid enters the inside of the computer, it may cause the computer to work improperly or be damaged. 43 Specifications Model No. CPU Memory (RAM/ROM) Video Memory LCD Type CF-P1P3 series CF-P1P1 series Intel PXA263 400MHz Instruction Cache Memory: 32 KB Data Cache Memory: 32 KB 64 MB (Max 128 MB)/ 64 MB (Flash) 256 KB 3.5 type (Reflective color TFT with front light*1) Displayed Colors 65536 colors (240 x 320 dots) Keyboard 38-key keyboard
(QWERTY type) 23-key numeric keypad
(10-key type) Pointing Device Slots CF Card Slot SD Memory Card Slot Touchscreen, Cursor Control One Type I or Type II, Allowable current 3.3 V: 400 mA, 5 V: 400 mA SD memory card/MultiMedia Card Interface Communica-
tion Port Headset Jack IrDA 1.2 low power compliant, 115.2 kbps data transmission speed Miniature jack, 2.5 DIA Speaker Monaural Speaker Microphone/Receiver Sound Battery Battery Pack Built-in for supporting as Mobile Phone 16-bit Stereo ADC/DAC, Sample Rate 48 kHz Li-ion 7.4 V, 2.1 Ah Operating Time*2 Approx. 8 hours - 24 hours Approx. 3 hours Charging Time*2 Sub-Battery AC Adaptor*3 Input Output Operating System Lithium Rechargeable Backup Battery 100 V - 240 V AC, 50 Hz/60 Hz 16 V DC, 2.5 A Microsoft Windows MobileTM 2003 software for Pocket PC Environment In use Temperature -20 C to 50 C {-4 F to 122 F}
30 % to 80 % RH (No condensation) Humidity Not in use Temperature -25 C to 60 C {-13 F to 140 F}
30 % to 90 % RH (No condensation) Humidity
*1
*2
*3 In this manual, front light is described as backlight. Varies depending on the usage conditions, backlight on/off, etc. The AC adaptor is compatible with power sources up to 240 V AC adaptor. This computer is supplied with a 125 V AC compatible AC cord. 44 Microsoft ActiveSync 3.7 System Requirements Microsoft Windows XP, Microsoft Windows 2000, Microsoft Windows Millennium Edition, Microsoft Windows NT Workstation 4.0 with SP6 or later, or Microsoft Windows 98 Microsoft Outlook 98 or later required for synchronization to the desktop or portable computer of e-
mail, calendar, contacts, tasks, and notes. (Microsoft Outlook 2002 recommended) Microsoft Internet Explorer 4.01 SP1 or later Hard-disk drive with 12 to 65 MB of available hard-disk space (actual requirements will vary based on selection of features and user's current system configuration) Available 9- or 25-pin communications port (adaptor required for 25-pin communications port), infrared port, or USB port (available for Windows 98, Windows Millennium Edition, Windows 2000, and Windows XP only) One CD-ROM drive VGA graphics card or compatible video graphics adapter at 256 color or higher Keyboard Microsoft Mouse or compatible input device Options for Windows XP, Windows 2000, Windows Millennium Edition, Windows NT Workstation 4.0, or Windows 98 Audio card/Speakers for sound Microsoft Office 97, Microsoft Office 2000, or Microsoft Office XP Modem for remote synchronization Ethernet LAN connection for remote synchronization Microsoft Outlook 2002 System Requirements Hard disk space requirements will vary depending on configuration; custom installation choices may require more or less hard disk space. 245 MB of available hard disk space with 115 MB on the hard disk where the operating system is installed. RAM requirements depend on the operating system used:
Windows 98, or Windows 98 Second Edition 24 MB of RAM plus an additional 8 MB of RAM for each Office program running simultaneously Windows Millennium Edition, or Microsoft Windows NT 32 MB of RAM plus an additional 8 MB of RAM for each Office program running simultaneously Windows 2000 Professional 64 MB of RAM plus an additional 8 MB of RAM for each Office program running simultaneously 45 LIMITED USE LICENSE AGREEMENT THE SOFTWARE PROGRAM(S) (PROGRAMS) FURNISHED WITH THIS PANASONIC PRODUCT
(PRODUCT) ARE LICENSED ONLY TO THE END-USER (YOU), AND MAY BE USED BY YOU ONLY IN ACCORDANCE WITH THE LICENSE TERMS DESCRIBED BELOW. YOUR USE OF THE PRO-
GRAMS SHALL BE CONCLUSIVELY DEEMED TO CONSTITUTE YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE. Matsushita Electric Industrial Co., Ltd. (MEI) has developed or otherwise obtained the Programs and hereby licenses their use to you. You assume sole responsibility for the selection of the Product (includ-
ing the associated Programs) to achieve your intended results, and for the installation, use and results obtained therefrom. LICENSE A. MEI hereby grants you a personal, non-transferable and non-exclusive right and license to use the Programs in accordance with the terms and conditions stated in this Agreement. You acknowledge that you are receiving only a LIMITED LICENSE TO USE the Programs and related documentation and that you shall obtain no title, ownership nor any other rights in or to the Programs and related documentation nor in or to the algorithms, concepts, designs and ideas represented by or incorpo-
rated in the Programs and related documentation, all of which title, ownership and rights shall remain with MEI or its suppliers. B. You may use the Programs only on the single Product which was accompanied by the Programs. C. You and your employees and agents are required to protect the confidentiality of the Programs. You may not distribute or otherwise make the Programs or related documentation available to any third party, by time-sharing or otherwise, without the prior written consent of MEI. D. You may not copy or reproduce, or permit to be copied or reproduced, the Programs or related documentation for any purpose, except that you may make one (1) copy of the Programs for backup purposes only in support of your use of the Programs on the single Product which was accompanied by the Programs. You shall not modify, or attempt to modify, the Programs. E. You may transfer the Programs and license them to another party only in connection with your trans-
fer of the single Product which was accompanied by the Programs to such other party. At the time of such a transfer, you must also transfer all copies, whether in printed or machine readable form, of every Program, and the related documentation, to the same party or destroy any such copies not so transferred. F. You may not remove any copyright, trademark or other notice or product identification from the Pro-
grams and you must reproduce and include any such notice or product identification on any copy of any Program. YOU MAY NOT REVERSE ASSEMBLE, REVERSE COMPILE, OR MECHANICALLY OR ELECTRONI-
CALLY TRACE THE PROGRAMS, OR ANY COPY THEREOF, IN WHOLE OR IN PART. YOU MAY NOT USE, COPY, MODIFY, ALTER, OR TRANSFER THE PROGRAMS OR ANY COPY THEREOF, IN WHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED IN THE LICENSE. IF YOU TRANSFER POSSESSION OF ANY COPY OF ANY PROGRAM TO ANOTHER PARTY, EX-
CEPT AS PERMITTED IN PARAGRAPH E ABOVE, YOUR LICENSE IS AUTOMATICALLY TERMI-
NATED. TERM This license is effective only for so long as you own or lease the Product, unless earlier terminated. You may terminate this license at any time by destroying, at your expense, the Programs and related docu-
mentation together with all copies thereof in any form. This license will also terminate effective immedi-
ately upon occurrence of the conditions therefore set forth elsewhere in this Agreement, or if you fail to comply with any term or condition contained herein. Upon any such termination, you agree to destroy, at your expense, the Programs and related documentation together with all copies thereof in any form. YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. YOU FURTHER AGREE THAT IT IS THE COM-
PLETE AND EXCLUSIVE STATEMENT OF THE AGREEMENT BETWEEN US, WHICH SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT, ORAL OR WRITTEN, AND ANY OTHER COMMUNICA-
TIONS BETWEEN US, RELATING TO THE SUBJECT MATTER OF THIS AGREEMENT. 46 Copyright This manual is copyrighted by Matsushita Electric Industrial Co., Ltd. with all rights reserved. No part of this manual may be reproduced in any form without the prior written permission of Matsushita Electric Industrial Co., Ltd. No patent liability is assumed with respect to the use of the information contained herein. 2003 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. Disclaimer Computer specifications and manuals are subject to change without notice. Matsushita Electric Industrial Co., Ltd. assumes no liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manuals. Trademarks Microsoft, Windows, Windows NT, Outlook and ActiveSync are registered trademarks of Microsoft Corporation of the United States and/or other countries. Mobile is a trademark of Microsoft Corporation of the United States and/or other countries. Intel and Pentium are registered trademarks of Intel Corporation. Panasonic is a registered trademark of Matsushita Electric Industrial Co., Ltd. 47 2003 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. Printed in Japan SS1103-0 DFQX5434ZA
1 2 | User Manual for WLAN | Users Manual | 50.19 KiB | March 03 2004 |
Using a Wireless LAN ENGLISH SUPPLEMENTARY INSTRUCTIONS Information to the User ................................2 Read Me First - For U.S.A. ..........................3 First-time Operation .....................................4 Dealing with Problems .................................5 Specifications ...............................................6 E N G L S H I Supplementary Instructions This Supplementary Instructions explains how to get started with a wireless LAN and point out cases where the operation of the computer will differ from that in the Operating Instructions. Wireless LAN Antenna NOTE Wireless LAN communications are done via an antenna. Do not shield this antenna with the hand, etc. This will negatively effect the performance of your wireless LAN commu-
nications. Information to the User This product and your Health This product, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by this product however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones. Because this product operates within the guidelines found in radio frequency safety stan-
dards and recommendations, we believe this product is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and inter-
pret the extensive research literature. In some situations or environments, the use of this product may be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include:
Using this product on board of airplanes, or In any other environment where the risk of interference to other devices or services is perceived or identified as harmful. If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment (e.g. airports), you are encouraged to ask for authorization to use this product prior to turning on the product. Regulatory Information We are not responsible for any radio or television interference caused by unauthorized modi-
fication of this product. The correction of interference caused by such unauthorized modifi-
cation will be the responsibility of the user. We and its authorized resellers or distributors are not liable for damage or violation of government regulations that may arise from failing to comply with these guidelines. 2 Read Me First - For U.S.A. Replace as follows. Federal Communications Commission Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip-
ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the Panasonic Service Center or an experienced radio/TV technician for help. Safety Notice Do not touch or move antenna while the unit is transmitting or receiving. Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body, especially the face or eyes, while transmitting. Do not operate a portable transmitter near unshielded blasting caps or in an explosive environment unless it is type especially qualified for such use. Warning To assure continued compliance, use only shielded interface cables when connecting to a computer or peripheral. Also, any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and minimum 1.5 cm spacing must be provided between antenna and all persons body
(excluding extremities of hands, wrist and feet) during wireless modes of operation. This equipment may use multiple installed transmitters, which may be capable of simulta-
neous transmission. E N G L S H I This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation. Responsible Party: Matsushita Electric Corporation of America One Panasonic Way Secaucus, NJ 07094 Tel No:1-800-LAPTOP-5 (1-800-527-8675) 3 Supplementary Instructions First-time Operation After finishing theFirst-time Operation of Operating Instructions, install the driver for Wireless LAN using the following procedure. Install the driver for Wireless LAN If the [Wireless LAN] file is not inside the [Options] folder in [My Computer], perform all steps from (1) to (7). If the [Wireless LAN] file is present, perform steps (4) through (7).
(1)When the computer recognizes the internal Wireless LAN card, a screen will be displayed designating the driver name. Tap to close this screen.
(2)Tap [Start]-[Run] in order, then input ffrestore.exe r, and then tap [OK]. The driver for Wireless LAN will be copied from the Flash memory to the [Options] folder in [My Computer].
(3)When [Complete] is displayed, press
* or
* Varies depending on the models.
(4)Install the driver for Wireless LAN. 1) Double-tap [My Computer], and then double-tap the [Options] folder. 2) Double-tap [WirelessLAN]. 3) A screen will be displayed specifying the install destination folder. Tap [OK]. 4) When [Setup Complete] is displayed, tap [OK]. 5) Push the reset switch using the stylus. When the computer is started up and the internal Wireless LAN card is correctly recognized, the [Symbol Status] screen will be displayed. When installation is complete, [WirelessLAN]
will be automatically deleted from [Options].
(5)Setting for Wireless LAN. Input the necessary information on the [Symbol Status] screen.
(ESSID and Operating Mode for the [Mode] tab, IP address for the [IP Config] tab, etc.)
(6)Tap [OK].
(7)Push the reset switch using the stylus. NOTE The size of the [Symbol Status]
screen cannot be changed. If part of this screen extends off of the screen, drag the title bar to reposi-
tion the window. NOTE Once the power switch has been pressed, you must wait at least 10 seconds before pressing it again. 4 Dealing with Problems When reinstalling the driver for Wireless LAN, File Write Error is displayed. The [Symbol Status]
icon is not displayed on the taskbar. Check if the computer memory is full. If it is full, delete unnecessary files. Check if the [Options] folder in [My Computer] has been deleted. If it has been deleted, recreate the [Options] folder in [My Computer] as follows:
(1)Double tap [My Computer], tap [File], and then tap [New
(2)Input Options for new folder name. Close all applications and turn off the computer, then turn on the computer. Folder]. E N G L S H I 5 Supplementary Instructions Specifications Wireless LAN Physical Dimensions*
(W x H x D) Weight*1 IEEE 802.11b compliant Frequency Number of Channels Bandwidth 98 mm x 41 mm x 203 mm {3.9 " x 1.6 " x 8.0 "}
(excluding the strap) Approx. 552 g {Approx. 1.2 lb.} (excluding the strap) 2.4 GHz band 11 ch 25 MHz
*1 These only apply to models equipped for a wireless LAN. Actual dimentions and weight vary depending on the model. 6
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2004-06-24 | 1850.2 ~ 1909.8 | PCE - PCS Licensed Transmitter held to ear | Original Equipment |
2 | 2412 ~ 2462 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2004-06-24
|
||||
1 2 | Applicant's complete, legal business name |
Panasonic Corporation of North America
|
||||
1 2 | FCC Registration Number (FRN) |
0003762242
|
||||
1 2 | Physical Address |
Two Riverfront Plaza, 9th Floor
|
||||
1 2 |
Newark, New Jersey 07102-5490
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
n/a | ||||||
app s | FCC ID | |||||
1 2 | Grantee Code |
ACJ
|
||||
1 2 | Equipment Product Code |
9TGCF-P12
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
B******** B******
|
||||
1 2 | Title |
Project Manager
|
||||
1 2 | Telephone Number |
201-3********
|
||||
1 2 | Fax Number |
201-3********
|
||||
1 2 |
B******@us.panasonic.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
Matsushita Electric Corp of America
|
||||
1 2 | Name |
R****** M******
|
||||
1 2 | Physical Address |
o
|
||||
1 2 |
One Panasonic Way, 4B-8
|
|||||
1 2 |
s, New Jersey 0
|
|||||
1 2 |
Secaucus, New Jersey 07094
|
|||||
1 2 |
United States
|
|||||
1 2 | Telephone Number |
(201)********
|
||||
1 2 | Fax Number |
(201)********
|
||||
1 2 |
m******@us.panasonic.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | PCE - PCS Licensed Transmitter held to ear | ||||
1 2 | DTS - Digital Transmission System | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | CF-P1 Personal Computer with WLAN+BT+GPRS | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Output power is ERP for Part 22 and EIRP for Part 24. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. SAR compliance for specific colocated transmitter conditions was evaluated for the held-to-ear, held-to-face, and near-body configurations as shown in this composite filing; other colocated configurations require separate evaluation. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The maximum reported colocated SAR values for this composite filing are: Part 22 Head: 1.19 W/kg; Body-worn: 1.18 W/kg Part 24 Head: 0.7 W/kg; Body-worn: 0.45 W/kg. | ||||
1 2 | Ouput power is conducted. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. SAR compliance for specific colocated transmitter conditions was evaluated for the held-to-ear, held-to-face, and near-body configurations as shown in this composite filing; other colocated configurations require separate evaluation. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.The maximum reported colocated SAR values for this composite filing are: Part 22 Head: 1.19 W/kg; Body-worn: 1.18 W/kg Part 24 Head: 0.7 W/kg; Body-worn: 0.45 W/kg. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
PCTEST Engineering Laboratory, Inc.
|
||||
1 2 | Name |
R****** O********
|
||||
1 2 | Telephone Number |
41029********
|
||||
1 2 | Fax Number |
41029********
|
||||
1 2 |
r******@pctestlab.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 22H | 16 | 824.2 | 848.8 | 1.407 | 0.01 ppm | 300KGXW | |||||||||||||||||||||||||||||||||
1 | 2 | 24E | 1850.2 | 1909.8 | 1.192 | 0.03 ppm | 300KGXW | ||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CE | 2412 | 2462 | 0.033 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15C | 2402 | 2480 | 0.0182 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC