Initial Setup Guide for Base Unit Home Network System Model No. KX-HNB600 Thank you for purchasing a Panasonic product. Please read this document before using the unit and save it for future reference. For assistance, visit our Web site: http://www.panasonic.com/help for customers in the U.S.A. or Puerto Rico. Installation For your safety To prevent severe injury and loss of life/
property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection R Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock. R Completely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire. R Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire. R Unplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact us at www.panasonic.com/contactinfo R Unplug from power outlets and never touch the inside of the product if its casing has been broken open. R Never touch the plug with wet hands. Danger of electric shock exists. Installation R Do not allow the AC adaptor or telephone line cord to be excessively pulled, bent or placed under heavy objects. R Do not perform any actions (such as fabricating, twisting, stretching, bundling, forcibly bending, damaging, altering, exposing to heat sources, or placing heavy objects on the power cable) that may damage the power cable. Using the product with a damaged power cable may cause electric shock, short circuits, or fire. Contact an authorized service center for repairs. Operating safeguards R Unplug the product from power outlets before cleaning. Do not use liquid or aerosol cleaners. R Do not disassemble the product. R Do not spill liquids (detergents, cleansers, etc.) onto the telephone line cord plug, or allow it to become wet at all. This may cause a fire. If the telephone line cord plug becomes wet, immediately pull it from the telephone wall jack, and do not use. R Never put metal objects inside the product. If metal objects enter the product, turn off the circuit breaker and contact an authorized service center. Medical R Consult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF
(radio frequency) energy. DECT features operate between 1.92 GHz and 1.93 GHz with a peak transmission power of 115 mW. Wi-Fi features operate between 2.412 GHz and 2.462 GHz with a peak transmission power of 100 mW. R Do not use the product in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. CAUTION Installation and location R Never install wiring during an electrical storm. R Never install telephone line jacks in wet locations unless the jack is specifically designed for wet locations. R Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. R Use caution when installing or modifying telephone lines. R The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the product and is easily accessible. R Do not place magnetic cards or similar objects near the product. Magnetic data may be erased. 2 For assistance, please visit http://www.panasonic.com/help Important safety instructions When using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
1. Do not use this product near water for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool. 2. Do not use a telephone to report a gas leak in the vicinity of the leak. 3. Use only the power cord indicated in this document. SAVE THESE INSTRUCTIONS For best performance Base unit location/avoiding noise The base unit and other compatible Panasonic units use radio waves to communicate with each other. Environment R Keep the product away from electrical noise generating devices, such as fluorescent lamps and motors. R The product should be kept free from excessive smoke, dust, high temperature, and vibration. R The product should not be exposed to R Do not place heavy objects on top of the direct sunlight. product. R When you leave the product unused for a long period of time, unplug the product from the power outlet. R The product should be kept away from heat sources such as heaters, kitchen stoves, etc. It should not be placed in rooms where the temperature is less than 0 C (32 F) or greater than 40 C (104 F). Damp basements should also be avoided. Routine care R Wipe the outer surface of the product with a R Do not use benzine, thinner, or any soft moist cloth. abrasive powder. Installation Notice for product disposal, transfer, or return R This product can store your private/
confidential information. To protect your privacy/confidentiality, we recommend that you erase information such as phonebook or caller list entries from the memory before you dispose of, transfer, or return the product. Notice:
Security cautions Take appropriate measures to avoid the following security breaches when using this product. Leaks of private information Unauthorized use of this product Unauthorized interference or suspension of the use of this product Take the following measures to avoid security breaches:
R Configure the wireless router that connects your mobile device to this product to use encryption for all wireless communication. R Do not use passwords that could be easily guessed by a third party. If you keep a record of your passwords, protect that record. Change passwords regularly. R If you lose your mobile device, change the password used to access this product. For assistance, please visit http://www.panasonic.com/help 3 This product is designed for use in the United States of America. Sale or use of this product in other countries may violate local laws. Cet appareil est conu pour tre utilis aux tats-Unis dAmrique. La vente ou lemploi de cet appareil dans certains autres pays peut constituer une infraction la lgislation locale. Este producto est diseado para usarse en los Estados Unidos de Amrica.La venta o el empleo de este producto en ciertos pases puede constituir violacin de la legislacin local. Installation R If you enable the products auto login feature, enable the screen lock or similar security feature on your mobile device. R To prevent disclosure of personal information, enable the screen lock or similar security feature on your mobile device. R Before disposing of the product, perform a factory data reset to erase any data stored in the product. Remove and erase the SD card. R Before handing the product over to a third party for repair or other purposes, perform a factory data reset to erase any data stored in the product and remove the SD card. Use only trusted repair services authorized by Panasonic. R When submitting the product for repair, make a note of any important information stored in the product, as this information may be erased or changed as part of the repair process. R If your mobile device will no longer be used with the product, delete your mobile devices registration from the product and delete the corresponding app from your mobile device. R If this product experiences a power outage, its date and time setting may become incorrect. In this case, the date and time setting will be automatically corrected when your mobile device and this product are connected to the same wireless network. Additionally, note the following. R Only one mobile device can access this product while away from home. If a second mobile device connects to this product while away from home, the first mobile device is disconnected. R Communications may be interrupted depending on network conditions and wireless signal quality. R This product may be used in ways that violate the privacy or publicity rights of others. You are responsible for the ways in which this product is used. Other information Trademarks R microSDHC Logo is a trademark of SD-3C, LLC. R All other trademarks identified herein are the property of their respective owners. 4 For assistance, please visit http://www.panasonic.com/help FCC and other information This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:ACJ----------. If requested, this number must be provided to the telephone company. R Registration No.............(found on the bottom of the unit) R Ringer Equivalence No. (REN).......0.1B A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with the product. It is designed to be connected to a compatible modular jack that is also compliant. The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for the product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point
(e.g., 03 is a REN of 0.3). If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isnt practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. Installation for you to make necessary modifications to maintain uninterrupted service. If trouble is experienced with this equipment, for repair or warranty information, please contact a Factory Service Center or other Authorized Servicer. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information. If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section 68.316. When you hold the phone to your ear, noise might be heard in your Hearing Aid. Some Hearing Aids are not adequately shielded from external RF (radio frequency) energy. If noise occurs, use an optional headset accessory or the speakerphone option (if applicable) when using this phone. Consult with your audiologist or Hearing Aid manufacturer about the availability of Hearing Aids which provide adequate shielding to RF energy commonly emitted by digital devices. WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST CALLS TO EMERGENCY NUMBERS:
1. Remain on the line and briefly explain to the dispatcher the reason for the call. 2. Perform such activities in the off-peak hours, such as early morning or late evenings. The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this phone. For assistance, please visit http://www.panasonic.com/help 5 R For body-worn operation, the handset must be used only with a non-metallic accessory. Use of other accessories may not ensure compliance with FCC RF exposure requirements. Notice:
R FCC ID can be found inside the battery compartment or on the bottom of the units. Installation CAUTION:
Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this device. NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/
TV technician for help. Some cordless telephones operate at frequencies that may cause interference to nearby TVs and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. If interference is experienced, move the cordless telephone further away from the TV or VCR. This will often reduce or eliminate interference. FCC RF Exposure Warning:
R This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. R To comply with FCC RF exposure requirements, the base unit must be installed and operated 20 cm (8 inches) or more between the product and all persons body. R This product may not be collocated or operated in conjunction with any other antenna or transmitter. 6 For assistance, please visit http://www.panasonic.com/help Physical features Connections Setup Insert the AC adaptor plug firmly into the DC jack. Secure the AC adaptor cord by wrapping around the hook. Connect the AC adaptor to the power outlet. Insert the telephone line cord into the TEL jack and the telephone line jack until you hear a click. DSL/ADSL service users only: Connect your DSL/ADSL filter (not supplied). Insert the SD card. Note:
R Use only the supplied Panasonic AC adaptor PNLV241. Speaker Status light DC jack TEL jack WI-FI SETUP button microSD card slot HANDSET/LOCATOR button CAMERA button OTHER DEVICE button For assistance, please visit http://www.panasonic.com/help 7 CBADEFGHIDEDCBA21F Setup Wall mounting 1 Attach the wall mount bracket to the wall. 2 Attach the base unit to the wall mount bracket. Specifications R Frequency range DECT:
1.92 GHz1.93 GHz Wi-Fi:
2.412 GHz2.462 GHz (channels 111) R Power source 120 V AC, 60 Hz R Operating conditions 0 C40 C (32 F104F) 20%80% relative air humidity (dry) 8 For assistance, please visit http://www.panasonic.com/help xx mm(xx in.) Two Riverfront Plaza, Newark, NJ 07102-5490 Panasonic System Networks Co., Ltd. 2014Printed in China