all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 2.21 MiB | December 12 2016 | |||
1 | External Photos | December 12 2016 | ||||||
1 | Internal Photos | December 12 2016 | ||||||
1 | ID Label/Location Info | December 12 2016 | ||||||
1 | Cover Letter(s) | December 12 2016 | ||||||
1 | RF Exposure Info | December 12 2016 | ||||||
1 | Test Report | December 12 2016 | ||||||
1 | Test Setup Photos | December 12 2016 |
1 | User Manual | Users Manual | 2.21 MiB | December 12 2016 |
Operating Instructions Cordless Telephone with Digital Answering Machine Model No. KX-TGF540 KX-TGF542 KX-TGF543 KX-TGF544 KX-TGF545 Model shown is KX-TGF540. Before initial use, see Getting Started on page 10. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. Consulte Gua Rpida Espaola, pgina 62. For assistance, visit our Web site: http://shop.panasonic.com/support for customers in the U.S.A. Please register your product: http://shop.panasonic.com/support 2nd draft_TGF54x_(en)_ver002.pdf 1 2016/10/31 15:51:21 Answering System Answering system ......................................44 Turning the answering system on/off .........44 Greeting message ......................................44 Listening to messages ...............................45 Advanced new message alerting features ......................................................46 Remote operation .......................................48 Answering system settings .........................49 Useful Information Voicemail service .......................................50 Wall mounting ............................................51 Error messages ..........................................53 Troubleshooting .........................................54 FCC and other information .........................59 Gua Rpida Espaola Gua Rpida Espaola ...............................62 Appendix Customer services .....................................67 Limited Warranty (ONLY FOR U.S.A.) .......68 Index Index...........................................................70 Table of Contents Introduction Model composition .......................................3 Accessory information ..................................3 Graphical symbols for use on equipment and their descriptions ..........................................5 Important Information For your safety .............................................6 Important safety instructions ........................7 For best performance ...................................7 Other information .........................................8 Specifications ...............................................9 Getting Started Setting up ...................................................10 Controls ......................................................12 Display icons ..............................................14 Language settings ......................................14 Date and time .............................................15 Recording your greeting message .............15 Other settings .............................................15 Making/Answering Calls Making calls ...............................................17 Answering calls ..........................................18 Useful features during a call .......................18 Intercom .....................................................20 Power backup operation ............................21 Call Block Call block ....................................................23 Storing unwanted callers ............................23 Phonebook Phonebook .................................................26 Speed dial ..................................................29 Programming Menu list .....................................................30 Alarm ..........................................................37 Silent mode ................................................37 Baby monitor ..............................................38 Other programming ....................................40 Registering a unit .......................................41 Caller ID Service Using Caller ID service ...............................42 Caller list ....................................................42 2 2nd draft_TGF54x_(en)_ver002.pdf 2 2016/10/31 15:51:22 Introduction Model composition Series KX-TGF540 series Model No. KX-TGF540 KX-TGF542 KX-TGF543 KX-TGF544 KX-TGF545 Base unit Part No. KX-TGF540 KX-TGF540 KX-TGF540 KX-TGF540 KX-TGF540 Handset Part No. KX-TGFA50 KX-TGFA50 KX-TGFA50 KX-TGFA50 KX-TGFA50 Quantity 1 2 3 4 5 Accessory information Supplied accessories Supplied handset qty. Accessory item/Part number No. A AC adaptor/PNLV226-0X B Telephone line cord/PNJA1186Z C Rechargeable batteries*6 D Handset cover*7 /
PNYNTGFA50BR E Belt clip/PNKE1098Z1 F Charger/PNLC1078ZB 1 units*1 2 units*2 3 units*3 4 units*4 5 units*5 Accessory quantity 1 1 2 1 1 1 1 4 2 2 1 1 1 6 3 3 2 1 1 8 4 4 3 1 1 10 5 5 4
*1 KX-TGF540
*2 KX-TGF542
*3 KX-TGF543
*4 KX-TGF544
*5 KX-TGF545
*6 See page 4 for replacement battery information.
*7 The handset cover comes attached to the handset. A F B C D E For assistance, please visit http://shop.panasonic.com/support 3 2nd draft_TGF54x_(en)_ver002.pdf 3 2016/10/31 15:51:22 Introduction Additional/replacement accessories Please contact your nearest Panasonic dealer for sales information (page 67). Accessory item Rechargeable batteries Headset Range extender Key detector Model number/Specifications HHR-4DPA*1 R To order, please visit http://shop.panasonic.com/support Battery type:
Nickel metal hydride (Ni-MH) 2 x AAA (R03) size for each handset KX-TCA60, KX-TCA93, KX-TCA400, KX-TCA430 KX-TGA405*2 KX-TGA20*3
*1 Replacement batteries may have a different capacity from that of the supplied batteries.
*2 By installing this unit, you can extend the range of your phone system to include areas where reception was previously not available. This product can be purchased online. Please visit our Web site: http://shop.panasonic.com/support
*3 By registering the key detector (4 max.) to a Panasonic Digital Cordless Phone and attaching it to an easy-to-lose item in advance, you can locate and find the mislaid item to which the key detector is attached. Please visit our Web site:
http://www.panasonic.com/tga20 Other information R Design and specifications are subject to change without notice. R The illustrations in these instructions may vary slightly from the actual product. Expanding your phone system Handset (optional): KX-TGFA50 You can expand your phone system by registering optional handsets (6 max.) to a single base unit. R Optional handsets may be a different color from that of the supplied handsets. 4 For assistance, please visit http://shop.panasonic.com/support 2nd draft_TGF54x_(en)_ver002.pdf 4 2016/10/31 15:51:22 Graphical symbols for use on equipment and their descriptions Symbol Symbol Explanation Alternating current (A.C.) Introduction Explanation Class P equipment
(equipment in which protection against electric shock relies on Double Insulation or Reinforced Insulation) ON (power) Direct current (D.C.) Protective earth OFF (power) Protective bonding earth Stand-by (power) Functional earth For indoor use only ON/OFF (power;
push-push) Caution, risk of electric shock For assistance, please visit http://shop.panasonic.com/support 5 2nd draft_TGF54x_(en)_ver002.pdf 5 2016/10/31 15:51:22 Important Information For your safety To prevent severe injury and loss of life/
property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection R Use only the power source marked on the product. R Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock. R Completely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire. R Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire. R Unplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact us at http://shop.panasonic.com/support R Unplug from power outlets and never touch the inside of the product if its casing has been broken open. R Never touch the plug with wet hands. Danger of electric shock exists. Installation R To prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture. R Do not place or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident. R Do not allow the AC adaptor or telephone line cord to be excessively pulled, bent or placed under heavy objects. Operating safeguards R Unplug the product from power outlets before cleaning. Do not use liquid or aerosol cleaners. R Do not disassemble the product. R Do not spill liquids (detergents, cleansers, etc.) onto the telephone line cord plug, or allow it to become wet at all. This may cause a fire. If the telephone line cord plug becomes wet, immediately pull it from the telephone wall jack, and do not use. Medical R Consult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF
(radio frequency) energy. (The product operates in the frequency range of 1.92 GHz to 1.93 GHz, and the RF transmission power is 115 mW (max.).) R Do not use the product in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. CAUTION Installation and location R Never install telephone wiring during an electrical storm. R Never install telephone line jacks in wet locations unless the jack is specifically designed for wet locations. R Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. R Use caution when installing or modifying telephone lines. R The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the product and is easily accessible. 6 For assistance, please visit http://shop.panasonic.com/support 2nd draft_TGF54x_(en)_ver002.pdf 6 2016/10/31 15:51:22 R This product is unable to make calls when:
the handset batteries need recharging or have failed. there is a power failure. Battery R We recommend using the batteries noted on page 4. USE ONLY rechargeable Ni-MH batteries AAA (R03) size. R Do not mix old and new batteries. R Do not open or mutilate the batteries. Released electrolyte from the batteries is corrosive and may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed. R Exercise care when handling the batteries. Do not allow conductive materials such as rings, bracelets, or keys to touch the batteries, otherwise a short circuit may cause the batteries and/or the conductive material to overheat and cause burns. R Charge the batteries provided with or identified for use with this product only, in accordance with the instructions and limitations specified in this manual. R Only use a compatible base unit (or charger) to charge the batteries. Do not tamper with the base unit (or charger). Failure to follow these instructions may cause the batteries to swell or explode. Attention:
A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY
(1-800-822-8837) for information on how to recycle this battery. Important Information Important safety instructions When using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
1. Do not use this product near water for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool. 2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 3. Do not use the telephone to report a gas leak in the vicinity of the leak. 4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. SAVE THESE INSTRUCTIONS For best performance Base unit location/avoiding noise The base unit and other compatible Panasonic units use radio waves to communicate with each other. R For maximum coverage and noise-free communications, place your base unit:
at a convenient, high, and central location with no obstructions between the handset and base unit in an indoor environment. away from electronic appliances such as TVs, radios, personal computers, wireless devices, or other phones. facing away from radio frequency transmitters, such as external antennas of mobile phone cell stations. (Avoid putting the base unit on a bay window or near a window.) R Coverage and voice quality depends on the local environmental conditions. For assistance, please visit http://shop.panasonic.com/support 7 2nd draft_TGF54x_(en)_ver002.pdf 7 2016/10/31 15:51:22 Notice for product disposal, transfer, or return R This product can store your private/
confidential information. To protect your privacy/confidentiality, we recommend that you erase information such as phonebook or caller list entries from the memory before you dispose of, transfer, or return the product. Notice Important Information R If the reception for a base unit location is not satisfactory, move the base unit to another location for better reception. Environment R Keep the product away from electrical noise generating devices, such as fluorescent lamps and motors. R The product should be kept free from excessive smoke, dust, high temperature, and vibration. R The product should not be exposed to R Do not place heavy objects on top of the direct sunlight. product. R When you leave the product unused for a long period of time, unplug the product from the power outlet. R The product should be kept away from heat sources such as heating devices, cooking appliances, etc. It should not be placed in rooms where the temperature is less than 0 C (32 F) or greater than 40 C (104 F). Damp basements should also be avoided. R The maximum calling distance may be shortened when the product is used in the following places: Near obstacles such as hills, tunnels, underground, near metal objects such as wire fences, etc. R Operating the product near electrical appliances may cause interference. Move away from the electrical appliances. Routine care R Wipe the outer surface of the product with a soft moist cloth. R Do not use benzine, thinner, or any abrasive powder. Other information CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. 8 For assistance, please visit http://shop.panasonic.com/support 2nd draft_TGF54x_(en)_ver002.pdf 8 2016/10/31 15:51:22 Important Information Specifications R Standard:
DECT 6.0 (Digital Enhanced Cordless Telecommunications 6.0) R Frequency range:
1.92 GHz to 1.93 GHz R RF transmission power:
115 mW (max.) R Power source:
120 V AC, 60 Hz R Power consumption:
Base unit:
Standby: Approx. 1.0 W Maximum: Approx. 4.3 W Charger:
Standby: Approx. 0.1 W Maximum: Approx. 1.8 W R Operating conditions:
0 C 40 C (32 F 104 F), 20 % 80 %
relative air humidity (dry) For assistance, please visit http://shop.panasonic.com/support 9 2nd draft_TGF54x_(en)_ver002.pdf 9 2016/10/31 15:51:22 Getting Started Setting up Connections n Base unit Connect the AC adaptor to the unit by pressing the plug firmly. Fasten the cord by hooking it. Connect the AC adaptor to the power outlet. Connect the telephone line cord to the unit, then to the single-line telephone jack
(RJ11C) until you hear a click. A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL service. Note:
R Use only the supplied Panasonic AC adaptor PNLV226. Connect the AC adaptor to the power outlet. Battery installation R USE ONLY rechargeable Ni-MH batteries AAA (R03) size (
). R Do NOT use alkaline/manganese/Ni-Cd batteries. R Confirm correct polarities (
,
). n Charger R Follow the directions on the display to set up the unit. 10 For assistance, please visit http://shop.panasonic.com/support 2nd draft_TGF54x_(en)_ver002.pdf 10 2016/10/31 15:51:22 1445321114231 Removing the battery Getting Started Battery charging Charge for about 7 hours. R Confirm Charging is displayed (
R When the batteries are fully charged, Fully charged is displayed.
). Note when setting up Note for connections R The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) R The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a horizontally oriented AC outlet that faces the floor, such as an AC outlet installed on a ceiling or under a table, as the weight of the adaptor may cause it to become disconnected. Note for battery installation R Use the supplied rechargeable batteries. For replacement, we recommend using the Panasonic rechargeable batteries noted on page 4, 7. Note for battery charging R It is normal for the handset to feel warm during charging. R Clean the charge contacts of the handset, base unit, and charger with a soft and dry cloth once a month. Before cleaning the For assistance, please visit http://shop.panasonic.com/support 11 2nd draft_TGF54x_(en)_ver002.pdf 11 2016/10/31 15:51:22 1211 Getting Started unit, disconnect from power outlets and any telephone line cords. Clean more often if the unit is exposed to grease, dust, or high humidity. Battery level Controls Handset Icon Battery level High Medium Low Needs charging. Empty Note:
R At the end of each call, the unit displays a large icon for a few moments to indicate the battery level. R You can set the unit to play a voice announcement when the battery is low or needs charging page 15 . Panasonic Ni-MH battery performance (supplied batteries) Operation In continuous use Not in use (standby) Operating time 12 hours max.*1 7 days max.*1
*1 If eco mode is on. Note:
R Actual battery performance depends on usage and ambient environment. Intelligent eco mode This feature automatically reduces handset power consumption by suppressing handset transmission power when the handset is close to the base unit. R When this feature is activated, is displayed. R Eco mode is turned off when the clarity booster is activated (page 19). Belt clip holes Speaker N (TALK) M Headset jack Dial keypad
*: Temporary tone dialing 0: (
MZN (SP-PHONE: Speakerphone) MCALL BLOCKN Microphone
) Ringer off 12 For assistance, please visit http://shop.panasonic.com/support 2nd draft_TGF54x_(en)_ver002.pdf 12 2016/10/31 15:51:22 BECDJKLIMAFGHABA Receiver Display MOFFN (
MFLASHNMCALL WAITN Charge contacts
) Getting Started Base unit n Control type Soft keys By pressing a soft key, you can select the feature shown directly above it on the display. Navigator key MDN, MCN, MFN, or MEN: Scroll through various lists and items. VOL. (Volume: MDN or MCN): Adjust the receiver or speaker volume while talking. MFN W: View the phonebook entry. MEN REDIAL: View the redial list. MCN CID (Caller ID): View the caller list. Charge contacts Speaker Display MERASEN MEXITN N (PLAY/STOP) M Message indicator MANSWER ON/OFFN ANSWER ON/OFF indicator MCALL BLOCKN Bracket R The base unit has an unremovable bracket for desk or wall mounting.To mount on a wall, see page 51 MHOLDN MREDIALNMPAUSEN MMUTEN MZN (SP-PHONE: Speakerphone) SP-PHONE indicator Microphone Dial keypad
*: Temporary tone dialing For assistance, please visit http://shop.panasonic.com/support 13 2nd draft_TGF54x_(en)_ver002.pdf 13 2016/10/31 15:51:22 QPONABCJIKLMDAFEBGH Getting Started MLOCATORN MINTERCOMN R You can locate a misplaced handset by pressing MLOCATORN. MFLASHNMCALL WAITN n Control type Soft keys By pressing a soft key, you can select the feature shown directly above it on the display. Navigator key MDN, MCN, M N, or M N: Scroll through various lists and items. VOLUME (Volume: MDN or MCN): Adjust the speaker volume while talking. M N/M N: Repeat/skip messages during playback. Display icons Handset display items Meaning Within base unit range Out of base unit range The line is in use. R When flashing:
The call is put on hold. R When flashing rapidly: An incoming call is now being received. Eco mode is on. (page 12) Noise reduction is set.
(page 19) Equalizer is set. (page 19) Speakerphone is on.
(page 17) Ringer volume is off.
(page 17, page 32) Silent mode is on. (page 37) Call sharing mode is off.
(page 34) Alarm is on. (page 37) Handset number Item Z 14 Item In use Line in use Meaning Battery level Blocked call (page 23) Baby monitor is activated. The name/number displayed next to the icon indicates the monitoring unit. (page 38) Answering system is being used by another unit. Someone is using the line. Base unit display items Item In use Line in use Meaning Ringer volume is off.
(page 35) Silent mode is on. (page 37) Call sharing mode is off.
(page 34) Greeting only is selected. Caller messages are not recorded. (page 49) Blocked call (page 23) Answering system is being used by a handset. Someone is using the line. Language settings Display language Handset / Base unit 1 MMENUN#110 2 MbN: Select the desired setting. a 3 Proceed with the operation for your unit. MSAVEN Handset: MOFFN Base unit: MEXITN For assistance, please visit http://shop.panasonic.com/support 2nd draft_TGF54x_(en)_ver002.pdf 14 2016/10/31 15:51:22 Voice announcement language You can select the language used for the following features. Answering system guidance Low battery alert announcement Talking Caller ID Handset 1 MMENUN#112 2 MbN: Select the desired setting. a MSAVEN a MOFFN Date and time Handset 1 MMENUN#101 2 Enter the current month, date, and year by selecting 2 digits for each. Example: July 12, 2017 07 12 17 3 MOKN 4 Enter the current hour and minute
(12-hour clock format) by selecting 2 digits for each. Example: 9:30 09 30 5 *: Select AM or PM. 6 MSAVEN a MOFFN Note:
R When English is selected as the display language, 12-hour clock format is used. When Spanish is selected, 24-hour clock format is used. Recording your greeting message You can record your own greeting message instead of using a pre-recorded greeting message. See page 44 for details. Getting Started Handset 1 MMENUN#302 2 MbN: Yes a MSELECTN 3 Record a greeting message. a MSTOPN a MOFFN Other settings Dialing mode If you cannot make calls, change this setting according to your telephone line service. The default setting is Tone. Tone: For tone dial service. Pulse: For rotary/pulse dial service. Handset 1 MMENUN#120 2 MbN: Select the desired setting. a MSAVEN a MOFFN Low battery alert This feature plays a voice announcement when the battery is low or needs charging. When this feature is turned on, the unit notifies you as follows. n When you end a call:
The unit plays a voice announcement when the battery is low or needs charging. If the battery status is almost empty, is displayed and the corresponding announcement is made only once. n When the handset is in standby mode:
If the battery is low or needs charging, the unit plays a voice announcement at the selected interval up to 3 times. Note:
R At the end of each call, the unit displays a large icon for a few moments to indicate the battery level. For assistance, please visit http://shop.panasonic.com/support 15 2nd draft_TGF54x_(en)_ver002.pdf 15 2016/10/31 15:51:22 Getting Started Setting low battery alert To turn this feature on, select the desired announcement interval, or select Off to turn this feature off. The default setting is Every hour. Handset 1 MMENUN#176 aMSELECTN 2 MbN: Select the desired setting. a MSAVEN a MOFFN 16 For assistance, please visit http://shop.panasonic.com/support 2nd draft_TGF54x_(en)_ver002.pdf 16 2016/10/31 15:51:22 Making calls Using the handset 1 Lift the handset and then dial the phone number. R To correct a digit, press MCLEARN. 2 Press M N to make the call. R To make the call using the speakerphone, press MZN. 3 When you finish talking, press MOFFN or place the handset on the base unit or charger. Note:
R To switch to the speaker, press MZN. To switch back to the receiver, press MZN/
M N. R In step 1, you can store the dialed phone number to the phonebook by pressing MSAVEN. Making a call using the redial list The last 5 phone numbers dialed are stored in the redial list (48 digits max. each). 1 MEN REDIAL 2 MbN: Select the desired entry. 3 M N Erasing a number in the redial list 1 MEN REDIAL 2 MbN: Select the desired entry. a 3 MbN: Yes a MSELECTN a MOFFN MERASEN R To correct a digit, press MCLEARN. Using the base unit 1 Dial the phone number. 2 MZN 3 When the other party answers, speak into 4 When you finish talking, press MZN. the microphone. Making/Answering Calls Note:
R While on a call, you can switch from the base unit to the handset:
Press M N on the handset, then press MZN on the base unit with the call sharing mode on (page 34). If the handset is on the base unit, simply lift it. Making a call using the redial list The last 10 phone numbers dialed are stored in the redial list (48 digits max. each). 1 MREDIALN 2 MbN: Select the desired entry. 3 MZN Erasing a number in the redial list 1 MREDIALN 2 MbN: Select the desired entry. a 3 MbN: YES a MSELECTN a MEXITN MERASEN Adjusting the receiver or speaker volume Handset / Base unit Press MDN or MCNrepeatedly while talking. Pause (for PBX/long distance service users) A pause is sometimes required when making calls using a PBX or long distance service. When storing a calling card access number and/or PIN in the phonebook, a pause is also needed (page 28). Example: If you need to dial the line access number 9 when making outside calls with a PBX:
Handset 1 9 a MDN (Pause) 2 Dial the phone number. a M N For assistance, please visit http://shop.panasonic.com/support 17 2nd draft_TGF54x_(en)_ver002.pdf 17 2016/10/31 15:51:22 Making/Answering Calls Base unit 1 9 a MPAUSEN 2 Dial the phone number aMZN. Note for handset and base unit:
R A 3.5 second pause is inserted each time you press MDN (Pause) on the handset or MPAUSEN on the base unit. Answering calls Using the handset 1 Lift the handset and then press M M N when the unit rings. N or 2 When you finish talking, press MOFFN or place the handset on the base unit or charger. Any key answer: You can answer the call by pressing any dial key. Auto talk: You can answer calls simply by lifting the handset (page 34). Temporary handset ringer off: You can turn the ringer off temporarily by pressing M N (left soft key). Using the base unit When a call is being received, the SP-PHONE indicator flashes rapidly. 1 Press MZN when the unit rings. 2 Speak into the microphone. 3 When you finish talking, press MZN. Adjusting the ringer volume Handset / Base unit Press MDN or MCN repeatedly to select the desired volume while ringing. One-touch ringer off for the handset Press and hold 0(
) until the unit beeps to turn the ringer off. While the ringer is turned off, the handset will not ring for calls. R You can turn the ringer on again by pressing and holding 0(
beeps.
) until the unit Useful features during a call Hold Handset 1 Press MMENUN during an outside call. 2 MbN: Hold a MSELECTN 3 To release hold, press M N. R Another handset user can take the call by pressing M N. R The base unit user can take the call by pressing MZN. Base unit 1 Press MHOLDN during an outside call. 2 To release hold, press MZN. R A handset user can take the call by pressing M N. Note for handset and base unit:
R While an outside call is on hold, the SP-PHONE indicator on the base unit flashes. R After holding for 10 minutes, the call is disconnected. Mute Handset 1 Press MMUTEN during a call. 2 To return to the call, press MMUTEN. Base unit 1 Press MMUTEN during a call. R The SP-PHONE indicator flashes. 2 To return to the call, press MMUTEN. Note for handset and base unit:
R MMUTEN is a soft key visible on the display during a call. 18 For assistance, please visit http://shop.panasonic.com/support 2nd draft_TGF54x_(en)_ver002.pdf 18 2016/10/31 15:51:23 Flash Handset / Base unit MFLASHN allows you to use the special features of your host PBX such as transferring an extension call, or accessing optional telephone services. Note:
R To change the flash time, see page 34. For call waiting or Call Waiting Caller ID service users To use call waiting or Call Waiting Caller ID, you must first subscribe with your phone service provider. This feature allows you to receive calls while you are already talking on the phone. If you receive a call while on the phone, you will hear a call waiting tone. If you subscribe to both Caller ID and Call Waiting with Caller ID services, the 2nd callers information is displayed on the unit that is in use after you hear the call waiting tone. Handset / Base unit 1 Press MCALL WAITN to answer the 2nd 2 To switch between calls, press MCALL call. WAITN. Note:
R Please contact your phone service provider for details and availability of this service in your area. Temporary tone dialing (for rotary/pulse service users) Handset / Base unit Press * before entering access numbers which require tone dialing. Making/Answering Calls may be interference. During an outside call, this feature is turned on automatically when necessary. R When this feature is turned on, is displayed. Handset noise reduction This feature allows you to hear the voice of the person you are talking to more clearly, by reducing the surrounding noise coming from the other partys telephone. 1 Press MMENUN while talking. 2 MbN: Noise reduction on or Noise reduction off a MSELECTN Note:
R Depending on the environment where this handset is being used, this feature may not be effective. R This feature is not available while using the speakerphone. Handset equalizer This feature clarifies the voice of the person you are talking to, producing a more natural-sounding voice that is easier to hear and understand. 1 Press MMENUN while talking. 2 MbN: Equalizer a MSELECTN 3 MbN: Select the desired setting. 4 Press MOKN to exit. Note:
R Depending on the condition and quality of your telephone line, this feature may emphasize existing line noise. If it becomes difficult to hear, turn this feature off. R This feature is not available while using the R When both the Equalizer setting and speakerphone. noise reduction are activated, shown on the display. is Handset clarity booster This feature can improve sound clarity when the handset is used in an area where there Call share You can join an existing outside call. For assistance, please visit http://shop.panasonic.com/support 19 2nd draft_TGF54x_(en)_ver002.pdf 19 2016/10/31 15:51:23 Making/Answering Calls Handset To join the conversation, press M the other unit is on an outside call. N when Base unit To join the conversation, press MZN when the handset is on an outside call. Note for handset and base unit:
R A maximum of 3 parties (including 1 outside party) can join a conversation using 2 extensions. (3-way conference) R To prevent other users from joining your conversations with outside callers, turn call sharing mode off (page 34). Transferring calls, conference calls Outside calls can be transferred or a conference call with an outside party can be made:
between 2 handsets between a handset and the base unit Handset 1 During an outside call, press MMENUN. 2 MbN: Intercom a MSELECTN 3 MbN: Select the desired unit. a MSELECTN R If you select Voice paging, the call will be switched from the ear-receiver mode to the speakerphone mode. 4 Wait for the paged party to answer. R If the paged party does not answer, press MBACKN to return to the outside call. 5 To complete the transfer:
Press MOFFN. To establish a conference call:
MMENUN a MbN: Conference a MSELECTN R To leave the conference, press MOFFN. The other 2 parties can continue the conversation. R To put the outside call on hold:
MMENUN a MbN: Hold a MSELECTN To resume the conference: MMENUN a MbN: Conference a MSELECTN R To cancel the conference: MMENUN a MbN: Stop conference a MSELECTN You can continue the conversation with the outside caller. Base unit 1 During an outside call, press MINTERCOMN. When 2 or more handsets are registered:
To page a specific handset, enter the To page all handsets, press 0 or wait handset number. for a few seconds. 2 Wait for the paged party to answer. R If paged party does not answer, press MINTERCOMN to return to the outside call. 3 To complete the transfer:
Press MZN. R The outside call is being routed to the handset. To establish a conference call:
Press MCONFN. R To leave the conference, press MZN. The other 2 parties can continue the conversation. R To put the outside call on hold, press MHOLDN. To resume the conference, press MCONFN. Intercom Intercom calls can be made:
between handsets between a handset and the base unit Note:
R When paging unit(s), the paged unit(s) beeps for 1 minute. R If you receive an outside call while talking on the intercom, the interrupt tone sounds. Handset: To finish intercom, press MOFFN. To answer the call, press M N. Base unit: To finish intercom, press MZN. To answer the call, press MZN again. 20 For assistance, please visit http://shop.panasonic.com/support 2nd draft_TGF54x_(en)_ver002.pdf 20 2016/10/31 15:51:23 R To change the ringer volume and ringertone for intercom, see page 32 2 When you finish talking, press MZN. Making/Answering Calls Making an intercom call Handset 1 MMENUN a MbN: Intercom a 2 MbN: Select the desired unit or Voice MSELECTN paging. a MSELECTN R If you select Voice paging, speak into the microphone after the beep. Your voice will be heard using the speakers of the base unit and all handsets, until a paged party answers your page or until you press MOFFN. After the other party answers, the speakerphone mode is turned on. 3 When you finish talking, press MOFFN. Note:
R You can also use the MINTERCOMN soft key, if displayed, to make intercom calls. R You cannot use voice paging if other units are in use. R Voice paging is not available when a range extender (KX-TGA405) is registered to the base unit. Base unit 1 Press MINTERCOMN. When 2 or more handsets are registered:
To page a specific handset, enter the To page all handsets, press 0 or wait handset number. for a few seconds. 2 When you finish talking, press MZN. Answering an intercom call Handset 1 Press M 2 When you finish talking, press MOFFN. Base unit 1 Press MZN to answer the page. N to answer the page. Turning auto intercom on/off This feature allows the handset or base unit to answer intercom calls automatically when it is called. You do not need to press M N or MZN. When this feature is set to On, the monitoring handset or base unit for the baby monitor feature (page 40) will also answer baby monitor calls automatically. The default setting is Off. Handset / Base unit 1 MMENUN#273 2 MbN: Select the desired setting. a 3 Proceed with the operation for your unit. MSAVEN Handset: MOFFN Base unit: MEXITN Note:
R This feature is not available for all handsets paging and voice paging even if it is turned on. Power backup operation When a power failure occurs, the charged handset temporarily supplies power to the base unit (power backup mode). This allows you to make and receive calls using a handset during a power failure. The base unit will not perform any other functions. However, some functions such as Caller ID and phonebook are available only when using a handset other than the handset supplying power to the base unit. You can program Power failure and the default setting is Auto (page 34). Important:
R If a handset is not placed on the base unit when a power failure occurs, Power outage Press OFF is displayed. After pressing MOFFN on the handset, place it on the base unit to start power backup mode. R Power backup mode will not work if the battery level of the power supplying handset is or
. For assistance, please visit http://shop.panasonic.com/support 21 2nd draft_TGF54x_(en)_ver002.pdf 21 2016/10/31 15:51:23 3 MbN: Select the desired entry. 4 Within 1 minute, place the handset on the base unit. R Wait until speakerphone is turned on automatically and the call is made. n When 2 or more handsets are registered:
You should leave one handset on the base unit for supplying the power, and use another handset for making calls. Making a call using the phonebook There must be at least 2 handsets registered to the base unit in order for the phonebook feature to be used during a power failure. You should leave one handset on the base unit for supplying the power, and use another handset for making calls. Answering calls during a power failure n When only 1 handset is registered:
1 When the unit rings, keep the handset on the base unit and press M MZN. R Speakerphone is turned on. N or 2 When you finish talking, press MOFFN. n When 2 or more handsets are registered:
When the unit rings, use a handset which is not supplying power to the base unit. R Do not use or lift the handset which is placed on the base unit during power backup mode. Note:
R The range of the base unit is limited during a power failure. Please use the handset close to the base unit. Making/Answering Calls R Do not lift the power supplying handset from the base unit during power backup mode. Panasonic Ni-MH battery performance (supplied batteries) during power backup mode When the batteries are fully charged, operating time of the handset in power backup mode varies depending on usage. Continuous use of the handset in power backup mode: 1.5 hours max. Continuous use of the handset other than a handset in power backup mode: 2 hours max. Not in use in power backup mode: 2 hours max. Making calls during a power failure n When only 1 handset is registered:
1 Lift the handset and dial the phone 2 Within 1 minute, place the handset on the base unit. R Wait until speakerphone is turned number. on automatically and the call is made. 3 When the other party answers the call, keep the handset on the base unit and talk using the speakerphone. 4 When you finish talking, press MOFFN. n When 2 or more handsets are registered:
You should leave one handset on the base unit for supplying the power, and use another handset for making calls. Note:
R The range of the base unit is limited during a power failure. Please use the handset close to the base unit. Making a call using the redial list n When only 1 handset is registered:
1 Lift the handset. 2 MEN REDIAL 22 For assistance, please visit http://shop.panasonic.com/support 2nd draft_TGF54x_(en)_ver002.pdf 22 2016/10/31 15:51:23 Call block You can press the MCALL BLOCKN button in the following situations to disconnect the current call and add a phone number to the call block list:
when an incoming call is being received when an incoming call is being recorded by the answering system when talking on an outside call Once a phone number has been added to the call block list, the unit will block calls from that phone number in the future. situations shown above. Handset / Base unit 1 Press MCALL BLOCKN under the 2 Confirm the call block number and press MYESN. R The call block number is stored in the call block list, Caller blocked is displayed, and then the call is disconnected. Note:
R If the call has no phone number, the call is blocked but it is not stored in the call block list. R The call block feature is not available for intercom calls or calls received by call waiting. R Blocked calls are logged in the caller list. Storing unwanted callers The unit can block calls by storing the desired items in the call block list beforehand (Caller ID subscribers only). Block a single number*1/Block a single #*2: The unit blocks calls from specific phone numbers stored in the call block list. Block range of numbers*1/Block range of #*2: The unit blocks calls that begin with a number stored in the call block list, such as a toll-free phone number prefix or certain area codes. Call Block Block unknown CID*1/Block unknown*2: The unit blocks calls that have no phone number.
*1 Handset
*2 Base unit Single phone numbers and ranges of numbers can be stored in the call block list up to 250 items in total. Blocking unwanted callers:
When a call is received, the unit rings once*1 while caller information is being received. If the callers phone number matches an entry in the call block list, the unit emits no sound to the caller, and disconnects the call.
*1 If you do not want this one ring to sound, select No in Turning the first ring on/
off (page 24). Storing a single phone number Important:
R We recommend storing 10 digits (including the area code). If only 7 digits are stored, all numbers that have the same last 7 digits will be blocked. Adding call blocked numbers from the caller list Handset 1 MCN CID 2 MbN: Select the desired entry to be blocked. R To edit the number: MMENUN a MbN:
Edit a MSELECTN Press MEDITN repeatedly until the phone number is shown in the 10-digit format. a MSAVEN a MbN: Call block a MSELECTN a Go to step 4. 3 MCALL BLOCKN 4 MbN: Yes a MSELECTN 5 Edit the phone number if necessary (24 digits max.). a MSAVEN a MOFFN Base unit 1 MCIDN For assistance, please visit http://shop.panasonic.com/support 23 2nd draft_TGF54x_(en)_ver002.pdf 23 2016/10/31 15:51:23 Call Block 2 MbN: Select the entry to be blocked. R To edit the number: Press MEDITN repeatedly until the phone number is shown in the 10-digit format. 3 MCALL BLOCKN 4 MbN: Yes a MSELECTN 5 Edit the phone number if necessary (24 digits max.). a MSAVEN a MEXITN Adding call blocked numbers manually Handset 1 MCALL BLOCKN 2 MbN: Block a single number a 3 MMENUN a MbN: Add a MSELECTN 4 Enter the phone number (24 digits max.). MSELECTN a MSAVEN a MOFFN Base unit 1 MCALL BLOCKN 2 MbN: Block a single # a 3 MADDN 4 Enter the phone number (24 digits max.). MSELECTN a MSAVEN a MEXITN Storing a range of number Handset 1 MCALL BLOCKN 2 MbN: Block range of numbers a 3 MMENUN a MbN: Add a MSELECTN 4 Enter the desired number (2-8 digits). a MSELECTN MSAVEN a MOFFN Base unit 1 MCALL BLOCKN 2 MbN: Block range of # a 3 MADDN 24 MSELECTN 4 Enter the phone number (24 digits max.). a MSAVEN a MEXITN Blocking incoming calls that have no phone number You can block calls when no phone number is provided, such as private callers or out of area calls. Handset 1 MCALL BLOCKN 2 MbN: Block unknown CID a 3 MbN: Select the desired setting. a MSELECTN MSAVEN a MOFFN Base unit 1 MCALL BLOCKN 2 MbN: Block unknowna MSELECTN 3 MbN: Select the desired setting. a MSAVEN a MEXITN Turning the first ring on/off You can choose whether the first ring sounds when a call is received. Yes (default): The first ring for all calls will be heard, including calls from blocked phone numbers. No: The first ring is muted for all calls. If this setting is selected, the unit will never ring for calls from blocked phone numbers. Handset 1 MCALL BLOCKN 2 MbN: One ring for blocked call 3 MbN: Select the desired setting. a a MSELECTN MSAVEN a MOFFN Base unit 1 MCALL BLOCKN 2 MbN: Ring once a MSELECTN 3 MbN: Select the desired setting. a MSAVEN a MEXITN For assistance, please visit http://shop.panasonic.com/support 2nd draft_TGF54x_(en)_ver002.pdf 24 2016/10/31 15:51:23 Call Block 5 MbN: Yes a MSELECTN a MOFFN Base unit 1 MCALL BLOCKN 2 MbN: Block a single # or Block range of # a MSELECTN 3 MERASEN 4 MbN: Yes a MSELECTN 5 MbN: Yes a MSELECTN a MEXITN Viewing/editing/erasing call block numbers Handset 1 MCALL BLOCKN 2 MbN: Block a single number or Block range of numbers a MSELECTN 3 MbN: Select the desired entry. 4 To edit a number:
R After viewing, press MOFFN to exit. MEDITN a Edit the number. a MSAVEN a MOFFN To erase a number:
MERASEN a MbN: Yes a MSELECTN a MOFFN Base unit 1 MCALL BLOCKN 2 MbN: Block a single # or Block range of # a MSELECTN 3 MbN: Select the desired entry. 4 To edit a number:
R After viewing, press MSELECTN to exit. MEDITN a Edit the number. a MSAVEN a MEXITN To erase a number:
MERASEN a MbN: Yes a MSELECTN a MEXITN Note:
R When editing, press the desired dial key to add digits and press MCLEARN to erase digits. Erasing all call block numbers Handset 1 MCALL BLOCKN 2 MbN: Block a single number or Block range of numbers a MSELECTN 3 MMENUN a MbN: Erase all a 4 MbN: Yes a MSELECTN MSELECTN For assistance, please visit http://shop.panasonic.com/support 25 2nd draft_TGF54x_(en)_ver002.pdf 25 2016/10/31 15:51:23 Phonebook Phonebook You can add 100 names (16 characters max.) and phone numbers (24 digits max.) to the phonebook, and assign each phonebook entry to the desired group (page 27). Important:
R All entries can be shared by any registered handset. Adding phonebook entries Handset 1 MFN W a MMENUN 2 MbN: Add new entry a MSELECTN 3 Enter the partys name. a MOKN 4 Enter the partys phone number. a MOKN 5 MbN: Select the desired group. a MSELECTN 2 times a MOFFN Note:
R In step 3, you can switch the language for entering characters.
# a MbN: Select the desired language. a MOKN Entering characters Handset The following operations are also available. Press the dial key that corresponds to the desired character. Press repeatedly to scroll through the available characters. Key
*
MFN MEN MCLEARN Operation Switch between the uppercase and lowercase
(A a) Move the cursor Erase the character or number R To erase all, press and hold it. R To enter another character that is located on the same dial key, first press MEN to move the cursor to the next space. R If you do not press any dial key within 2 seconds after entering a character, the character is fixed and the cursor moves to the next space. Storing a redial list number to the phonebook Phone numbers of up to 24 digits can be stored in the phonebook. Handset 1 MEN REDIAL 2 MbN: Select the desired entry. a MSAVEN 3 To store the name, continue from step 3, Editing entries, page 27. Base unit 1 MREDIALN 2 MbN: Select the desired entry. a MSAVEN Note for handset and base unit:
R The name stored in the phonebook will be reflected in the redial list after you make a call using that phonebook entry. a MEXITN Note for base unit:
R If you stored redial list number to the phonebook using the base unit, the entry is automatically assigned to group 1. R If you want to edit the caller name or the group, you can do so using the handset
(page 27). Storing caller information to the phonebook Handset 1 MCN CID 2 MbN: Select the desired entry. a MMENUN R To edit the number: MbN: Edit a MSELECTN Press MEDITN repeatedly until the phone number is shown in the desired format. a MSAVEN a MbN:
Phonebook a MSELECTN a Go to step 4. 3 MbN: Save phonebook a MSELECTN 26 For assistance, please visit http://shop.panasonic.com/support 2nd draft_TGF54x_(en)_ver002.pdf 26 2016/10/31 15:51:23 Phonebook MbN: Select the current setting of the group ringer tone. a MSELECTN a MbN:
Select the desired ringer tone. a MSAVEN 5 MOFFN Finding and calling from a phonebook entry Handset / Base unit 1 Proceed with the operation for your unit. Handset: MFN W Base unit: MWN 2 To scroll through all entries MbN: Select the desired entry. To search by first character To search by group Press the dial key (0 to 9, or #) which contains the character you are searching for. MbN: Scroll through the phonebook if necessary. MGROUPN MbN: Select the desired group. a MSELECTN MbN: Scroll through the phonebook if necessary. 3 Proceed with the operation for your unit. Handset: M N Base unit: MZN Editing entries Handset 1 Find the desired entry (page 27). 2 MMENUN a MbN: Edit a MSELECTN 3 Edit the name if necessary. a MOKN 4 Edit the phone number if necessary. a 5 MbN: Select the desired group (page 27). MOKN a MSELECTN 2 times a MOFFN 4 Continue from step 3, Editing entries, page 27. Base unit 1 MCIDN 2 MbN: Select the desired entry. R To edit the number, press MEDITN repeatedly until the phone number is shown in the desired format. 3 MSAVEN 4 MbN: Phonebook a MSELECTN 5 MEXITN Note for base unit:
R If you stored caller information to the phonebook using the base unit, the entry is automatically assigned to group 1. R If you want to edit the caller name or the group, you can do so using the handset
(page 27). Groups Groups can help you find entries in the phonebook quickly and easily. You can change the names of groups assigned for phonebook entries (Friends, Family, etc.). By assigning different ringer tones for different groups of callers, you can identify who is calling (ringer ID), if you have subscribed to Caller ID service. Changing group names/setting ringer ID The default group name is Group 1 to Group 9. Handset 1 MFN W a MMENUN 2 MbN: Group a MSELECTN 3 MbN: Select the desired group. a 4 To change group names MSELECTN MbN: Group name a MSELECTN a Edit the name (10 characters max.). a MSAVEN To set group ringer tone For assistance, please visit http://shop.panasonic.com/support 27 2nd draft_TGF54x_(en)_ver002.pdf 27 2016/10/31 15:51:23 Note:
R When storing a calling card access number and your PIN in the phonebook as one phonebook entry, press MDN (PAUSE) to add pauses after the number and PIN as necessary (page 17). R If you have rotary/pulse service, you need to press * before pressing MFN W on the handset or MWN on the base unit in step 1 to change the dialing mode temporarily to tone. When adding entries to the phonebook, we recommend adding * to the beginning of phone numbers you wish to chain dial (page 26). Phonebook Erasing entries Erasing an entry Handset 1 Find the desired entry (page 27). 2 MMENUN a MbN: Erase a MSELECTN 3 MbN: Yes a MSELECTN a MOFFN Base unit 1 Find the desired entry (page 27). 2 MERASEN a MbN: Yes a MSELECTN a MEXITN Erasing all entries Handset 1 MFN W a MMENUN 2 MbN: Erase all a MSELECTN 3 MbN: Yes a MSELECTN 4 MbN: Yes a MSELECTN a MOFFN Base unit 1 MWN a MERASEN 2 MbN: Yes a MSELECTN 3 MbN: Yes a MSELECTN Chain dial This feature allows you to dial phone numbers in the phonebook while you are on a call. This feature can be used, for example, to dial a calling card access number or bank account PIN that you have stored in the phonebook, without having to dial manually. Handset / Base unit 1 Proceed with the operation for your unit. Handset: During an outside call, press MFN W. Base unit: During an outside call, press MWN. 2 MbN: Select the desired entry. 3 Press MCALLN to dial the number. 28 For assistance, please visit http://shop.panasonic.com/support 2nd draft_TGF54x_(en)_ver002.pdf 28 2016/10/31 15:51:23 Phonebook Erasing an entry Handset 1 Press and hold the desired speed dial key 2 MbN: Erase a MSELECTN 3 MbN: Yes a MSELECTN a MOFFN
(1 to 9). a MMENUN Viewing an entry/Making a call Handset 1 Press and hold the desired speed dial key 2 To make a call, press M
(1 to 9). N. Speed dial You can assign 1 phone number to each of the dial keys (1 to 9) on the handset. Adding phone numbers to speed dial keys Handset n By entering phone numbers:
key (1 to 9). a MADDN 1 Press and hold the desired speed dial 2 MbN: Manual a MSELECTN 3 Enter the partys name (16 characters 4 Enter the partys phone number (24 digits max.). a MOKN a MSELECTN a MOFFN max.). a MOKN n From the phonebook:
key (1 to 9). a MADDN 1 Press and hold the desired speed dial 2 MbN: Phonebook a MSELECTN 3 MbN: Select the desired entry. a MSAVEN a MOFFN Note:
R If you edit a phonebook entry which is assigned to a speed dial key, the edited entry does not transfer to the speed dial key. Editing an entry Handset 1 Press and hold the desired speed dial key 2 MbN: Edit a MSELECTN 3 Edit the name if necessary. a MOKN 4 Edit the phone number if necessary. a
(1 to 9). a MMENUN MOKN a MSELECTN a MOFFN For assistance, please visit http://shop.panasonic.com/support 29 2nd draft_TGF54x_(en)_ver002.pdf 29 2016/10/31 15:51:23 Programming Menu list To access the features, there are 2 methods. Handset / Base unit n Scrolling through the display menus 1 MMENUN 2 Press MCN or MDN to select the desired main menu. a MSELECTN 3 Press MCN or MDN to select the desired item from the next sub-menus. a MSELECTN 4 Press MCN or MDN to select the desired setting. a MSAVEN n Using the direct command code 1 MMENUN a Enter the desired code. Example: Press MMENUN#101. For available code:
Handset: see page 30 Base unit: see page 35 2 Select the desired setting. a MSAVEN Note:
R To exit the operation, press MOFFN on the handset or MEXIT N on the base unit.. R In the following table, < > indicates the default settings. R In the following table, R Display menu order and sub-menu may vary depending on your model. indicates the reference page number. Display menu tree and direct command code table n Handset Main menu: W Phonebook Operation Viewing the phonebook entry. Caller list Main menu:
Operation Viewing the caller list. Answering device Sub-menu 2 Main menu:
Sub-menu 1 Play new message Play all message Erase all message*1 Settings Code
#280 Code
#213 Code
#323
#324
#325 27 42 45 45 46 30 For assistance, please visit http://shop.panasonic.com/support 2nd draft_TGF54x_(en)_ver002.pdf 30 2016/10/31 15:51:23 Sub-menu 1 Greeting New message alert*1 Sub-menu 2 Record greeting*1 Check greeting Pre-recorded*1
(Reset to pre-recorded greeting) Outgoing call On/Off Outgoing call Notification to Outgoing call Remote code Base unit beep Settings Ring count*1 Recording time*1 Remote code*1 Screen call Voicemail access Answer on*1 Answer off*1 Main menu:
Operation Listening to voicemail messages. Intercom Main menu:
Operation Paging the desired unit. Main menu:
Sub-menu 1 Date and time*1 Memo alarm Set date & time Sub-menu 2 Alarm1-3 Programming Code
#302
#303
#304
#338
#339
#211
#305
#306
#310
#327
#328 Code
#330 Code
#274 Code
#101
#720 Settings On
<Off>
Activate
<Inactivate>
On
<Off>
Toll saver 2-7 rings
<4 rings>
<3 min>
1 min Greeting only*2
<111>
<On>Off Settings
<Off>
Once Daily Weekly 44 45 45 46 46 49 49 48 49 44 44 51 21 15 37 For assistance, please visit http://shop.panasonic.com/support 31 2nd draft_TGF54x_(en)_ver002.pdf 31 2016/10/31 15:51:23 Programming Sub-menu 1 Time adjustment*1, *3 Sub-menu 2 Speed dial Main menu:
Operation Viewing the speed dial entry. Settings Main menu:
Sub-menu 1 Ring adjustments Sub-menu 2 Ringer volume
(Incoming) Intercom ringer volume Ringer tone
(Incoming)*4,*5 Intercom ringer tone*4,*5 Silent mode Set date & time Date and time*1 Memo alarm Alarm1-3 Time adjustment*1, *3 Talking caller ID Low battery alert Code
#226 Code
#261 Code
#160
#175
#161
#163
#238
#237
#241
#101
#720 29 37 38 38 15 37
#226
#162
#176 42 15 Settings
<Caller ID auto>
Manual Settings Off6 <6>
16 <6>
<Tone 1>
<Tone 3>
On/Off On
<Off>
Start/End
< 11:00 PM /
06:00 AM>
Select group Group 1-9
<Off>
Once Daily Weekly
<Caller ID auto>
Manual
<On>Off Off
<Every hour>
Every 3 hours Every 6 hours 32 For assistance, please visit http://shop.panasonic.com/support 2nd draft_TGF54x_(en)_ver002.pdf 32 2016/10/31 15:51:23 Sub-menu 1 Key detector setting*6 1: Add new device (for Detector1)*7 2: Add new device (for Detector2) 3: Add new device (for Detector3) 4: Add new device (for Detector4) Call block*1 Speed dial Record greeting*1 Voicemail Sub-menu 2 Change name*1 Registration Deregistration Block a single number Block range of numbers Block unknown CID
(CID: Caller ID) One ring for blocked call Save VM access#*1
(VM: Voicemail) VM tone detect*1 LCD contrast
(Display contrast) Handset name Display name Auto intercom Key tone Caller ID edit
(Caller ID number auto edit) Settings Detector1 Detector2*8 Detector3*8 Detector4*8 Block
<Unblock>
<Yes>
No
<On>
Off Level 14 <2>
On
<Off>
On
<Off>
<On>Off
<On>
Off Programming Code
#6561
#6562*8
#6563*8
#6564*8
#6571
#6572*8
#6573*8
#6574*8
#6581
#6582*8
#6583*8
#6584*8
#217
#240
#173
#261
#302
#331
#332
#145
#104
#105
#273
#165
#214 23 24 24 24 29 44 50 50 40 41 21 43 For assistance, please visit http://shop.panasonic.com/support 33 2nd draft_TGF54x_(en)_ver002.pdf 33 2016/10/31 15:51:23 Programming Sub-menu 1 Auto talk*9 Set tel line Sub-menu 2 Set dial mode*1 Set flash time*1, *10 Call sharing*1 Registration Power failure Change language Set line mode*1, *11 Register handset Deregistration*2 Display Announcement*1 Customer support Main menu:
Operation Displaying customer support Web address. Baby monitor Main menu:
Sub-menu 1 On/Off Sensitivity level Sub-menu 2 Settings On
<Off>
<Tone>
Pulse 80 ms 90 ms 100 ms 110 ms 160 ms 200 ms 250 ms 300 ms 400 ms 600 ms
<700 ms>
900 ms A <B>
<On>
Off
<Auto>
Off
<English>
Espaol
<English>
Espaol Settings On
<Off>
Low
<Middle>
High Code
#200
#120
#121
#122
#194
#130
#131
#152
#110
#112 Code
#680 Code
#268
#269 18 15 19 19 41 41 21 14 15 38 40 34 For assistance, please visit http://shop.panasonic.com/support 2nd draft_TGF54x_(en)_ver002.pdf 34 2016/10/31 15:51:23 Key detector*6 Sub-menu 2 Settings Main menu:
Sub-menu 1 Search Battery check n Base unit Main menu: W Phonebook Operation Viewing the phonebook entry. Caller list Main menu:
Operation Viewing the caller list. Main menu:
Sub-menu 1 Screen call Answer device Sub-menu 2 Settings Main menu:
Sub-menu 1 Ring adjustments Sub-menu 2 Ringer volume Silent mode Talking CID
(Talking Call Display) Call block*1 LCD contrast
(Display contrast) Block a single #
Block range of #
Block unknown Ring once Programming Code
#655 Code
#280 Code
#213 Code
#310 Code
#160
#238
#237
#241
#162
#217
#240
#173
#145 27 42 49 37 38 38 42 23 24 24 24 Settings
<On>Off Settings Off6 <1>
On/Off On
<Off>
Start/End
< 11:00 PM /
06:00 AM>
Select group Group 1 - 9 On
<Off>
Block
<Unblock>
<Yes>
No Level 16 <3>
For assistance, please visit http://shop.panasonic.com/support 35 2nd draft_TGF54x_(en)_ver002.pdf 35 2016/10/31 15:51:23 Programming Sub-menu 1 Auto intercom Caller ID edit
(Caller ID number auto edit) Change language
(Display) Sub-menu 2 Cust. Support Main menu:
Operation Displaying customer support Web address. Settings On
<Off>
<On>Off
<English>
Espaol Code
#273
#214
#110 Code
#680 21 43 14
*1 If you program these settings using one of the units, you do not need to program the same
*2 This menu is not displayed when scrolling through the display menus. It is only available in item using another unit. direct command code.
*3 This feature allows the unit to automatically adjust the date and time each time caller information including date and time is received. To turn this feature on, select Caller ID auto. To turn this feature off, select Manual. (Caller ID subscribers only) To use this feature, set the date and time first (page 15). 2004 - 2013 Copyrights Vision Inc. 2). If you select a melody, you cannot distinguish lines by their ringers.
*4 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 to
*5 The preset melodies in this product (Tone 3 - Melody 10) are used with permission of
*6 This setting is available when you have the key detector (KX-TGA20). Read the installation
*7 For models with supplied key detectors, the display shows 1: Detector1.
*8 If you register 2 or more key detectors.
*9 If you subscribe to a Caller ID service and want to view the callers information after lifting up manual for more information on the key detector.
*10 The flash time depends on your telephone exchange or host PBX. Contact your PBX the handset to answer a call, turn off this feature. supplier if necessary. The setting should stay at 700 ms unless pressing MFLASHN fails to pick up the waiting call.
*11 Generally, the line mode setting should not be changed. This setting automatically maintains receiver volume at the proper level depending on the current telephone line condition. Set the line mode to A if telephone line condition is not good. 36 For assistance, please visit http://shop.panasonic.com/support 2nd draft_TGF54x_(en)_ver002.pdf 36 2016/10/31 15:51:23 Alarm An alarm sounds at the set time for 1 minute and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be displayed for the alarm. A total of 3 separate alarm times can be programmed for each handset. You can set one of 3 different alarm options (once, daily, or weekly) for each alarm time. Important:
R Make sure the units date and time setting is correct (page 15). Handset 1 MMENUN#720 2 MbN: Select the desired alarm. a 3 MbN: Select the desired alarm option. a MSELECTN MSELECTN Off Turns alarm off. Go to step 10. Once An alarm sounds once at the set time. Daily An alarm sounds daily at the set time. Go to step 5. Weekly Alarm sounds weekly at the set time(s). 4 Proceed with the operation according to your selection in step 3. n Once:
Enter the desired month and date. a MOKN n Weekly:
MbN: Select the desired day of the week and press MSELECTN. a MOKN 5 Set the desired time 6 *: Select AM or PM. a MOKN 7 Enter a text memo (10 characters max.). a MOKN Programming 8 MbN: Select the desired alarm tone. a MSELECTN R We recommend selecting a different ringer tone from the one used for outside calls. a MSAVEN 9 MbN: Select the desired snooze setting. 10 MSELECTN a MOFFN Note:
R Press MSTOPN to stop the alarm completely. R When the handset is in use, the alarm will not sound until the handset is in standby mode. R Press any dial key or MSNOOZEN to stop the sound but keep the snooze function activated. R If you want to make an outside call when the snooze function is activated, please stop the snooze function before making the call. Silent mode Silent mode allows you to select a period of time during which the handset and/or base unit will not ring for outside calls. This feature is useful for time periods when you do not want to be disturbed, for example, while sleeping. Silent mode can be set for each unit. Using the phonebooks group feature
(page 27), you can also select groups of callers whose calls override silent mode and ring the unit (Caller ID subscribers only). Important:
R Make sure the units date and time setting is correct (page 15). R If you have set the alarm, the alarm sounds even if the silent mode is turned on. Turning silent mode on/off Handset 1 MMENUN#238 2 MbN: Select the desired setting. a MSAVEN R If you select Off, press MOFFN to exit. For assistance, please visit http://shop.panasonic.com/support 37 2nd draft_TGF54x_(en)_ver002.pdf 37 2016/10/31 15:51:23 wish to start this feature. Programming 3 Enter the desired hour and minute you 4 *: Select AM or PM. a MOKN 5 Enter the desired hour and minute you wish to end this feature. 6 *: Select AM or PM. 7 MSAVEN a MOFFN Base unit 1 MMENUN#238 2 MbN: Select the desired setting. a exit. wish to start this feature. MSAVEN R If you select Off, press MEXITN to 3 Enter the desired hour and minute you 4 MAM/PMN: Select AM or PM. a MOKN 5 Enter the desired hour and minute you 6 MAM/PMN: Select AM or PM. 7 MSAVEN a MEXITN wish to end this feature. Changing the start and end time Handset / Base unit 1 MMENUN#237 2 Continue from step 3 for the handset or step 3 for base unit, Turning silent mode on/off, page 37. Selecting groups to bypass silent mode Handset / Base unit 1 MMENUN#241 2 MbN: Select your desired groups. a MSELECTN R group numbers. is displayed next to the selected R To cancel the selected group:
MbN: Select the group. a Press MSELECTN again. disappears. 3 MSAVEN 4 Proceed with the operation for your unit. Handset: MOFFN Base unit: MEXITN Baby monitor This feature allows you to listen in on a room where another handset is located, allowing you to easily monitor from different areas of the house or even while away from home. The monitored handset (placed in a babys room, for example) will automatically call the monitoring handset, base unit, or the phone number stored when it detects sound. Important:
R Before using this feature, we recommend that you test this feature and adjust the baby monitor sensitivity as needed, especially if you plan to monitor from outside. R This feature should not be used as a substitute for a medical or caregivers supervision. It is the caregivers responsibility to stay close enough to handle any eventuality. Note:
R If the unit is connected to a PBX system, you cannot set the baby monitor. R During the monitoring mode, battery consumption is faster than usual. We recommend leaving the monitored handset on the base unit or charger. R The monitored handset never rings while it is being monitored. If the base unit is placed near the monitored handset, we recommend turning off the base unit ringer volume (page 35). Setting the baby monitor Perform the setting operation with the handset to be monitored (for example, the handset placed in a babys room). To monitor with a unit The internal baby monitor feature is available:
between handsets between a handset and the base unit 38 For assistance, please visit http://shop.panasonic.com/support 2nd draft_TGF54x_(en)_ver002.pdf 38 2016/10/31 15:51:23 Handset 1 MMENUN#268 2 MbN: On a MSELECTN 3 MbN: Select the desired units number to monitor with. a MSAVEN R Baby monitor will be displayed. R The registered units name/number is displayed. Note:
R When this feature is on, another handset or the base unit can hear the monitored handset by making an intercom call. To monitor from outside If you enable this feature, the unit will call a pre-programmed phone number when the handset detects sound. After you answer the call, you can listen in on the room where the handset is located. Handset n From the phonebook:
1 MMENUN#268 2 MbN: On a MSELECTN 3 MbN: Select Outgoing call to monitor from outside. a MADDN 4 MbN: Phonebook a MSELECTN 5 MbN: Select the phonebook entry. a MSAVEN R Baby monitor will be displayed. Note:
R If you edit a phonebook entry which is assigned for monitoring, the edited entry does not transfer to the monitor. n By entering phone numbers:
1 MMENUN#268 2 MbN: On a MSELECTN 3 MbN: Select Outgoing call to monitor from outside. a MADDN 4 MbN: Manual a MSELECTN 5 Enter the desired name. a MOKN Programming 6 Enter the desired number. a MOKN a MSELECTN R Baby monitor will be displayed. Note:
R The registered name/number is displayed. Turning off the baby monitor The monitored handset cannot be used while baby monitor is set to On. Handset 1 Press MMENUN on the handset being 2 MbN: On/Off a MSELECTN 3 MbN: Off a MSELECTN a MOFFN monitored. Editing an outside monitoring number monitored. Handset 1 Press MMENUN on the handset being 2 MbN: On/Off a MSELECTN 3 MbN: On a MSELECTN 4 MbN: Select the outside line. 5 MMENUN a MbN: Edit a MSELECTN 6 Edit the name if necessary. a MOKN 7 Edit the phone number if necessary. a MOKN a MSELECTN monitored. Erasing an outside monitoring number Handset 1 Press MMENUN on the handset being 2 MbN: On/Off a MSELECTN 3 MbN: On a MSELECTN 4 MbN: Select the outside line. 5 MMENUN a MbN: Erase a MSELECTN 6 MbN: Yes a MSELECTN a MOFFN For assistance, please visit http://shop.panasonic.com/support 39 2nd draft_TGF54x_(en)_ver002.pdf 39 2016/10/31 15:51:23 Programming Baby monitor sensitivity You can adjust the sensitivity of the baby monitor. Increase or decrease the sensitivity to adjust the sound level needed to trigger the baby monitor feature. R This feature cannot be set during a monitoring call. Handset 1 Press MMENUN on the handset being 2 MbN: Sensitivity level a 3 MbN: Select the desired setting. a MSELECTN monitored. MSAVEN a MOFFN Answering the baby monitor n When monitoring with a unit:
N to answer a call. N to answer a call. Handset: Press M Base unit: Press M If you want to respond from the monitoring unit, press MMUTEN. R The monitoring unit will answer calls automatically when the auto intercom feature is set to On (page 21). Note:
R If you receive an outside call when communicating with the monitored handset, the interrupt tone sounds. To answer the call with the handset, press MOFFN, then press M N. To answer the call with the base unit, press MZN 3 times.*1
*1 If MMUTEN is pressed, press MZN 2 times. n When monitoring from outside:
Answer the call. If you want to respond from your monitoring phone, press #1 using tone dialing. You can turn off the baby monitor feature by pressing #0. Note:
R The unit disconnects the call automatically after 2 minutes. Other programming Changing the handset name The default handset name is Handset 1 to Handset 6. You can customize the name of each handset (Bob, Kitchen, etc.). This is useful when you make intercom calls between handsets. To display the handset name in standby mode, turn on the handset name display feature (page 41). Handset 1 MMENUN#104 2 Enter the desired name (10 characters max.). a MSAVEN a MOFFN 40 For assistance, please visit http://shop.panasonic.com/support 2nd draft_TGF54x_(en)_ver002.pdf 40 2016/10/31 15:51:23 Programming Deregistering a handset A handset can cancel its own registration to the base unit, or other handsets registered to the same base unit. This allows the handset to end its wireless connection with the system. Handset 1 MMENUN#131 R All handsets registered to the base unit are displayed. 2 MbN: Select the handset you want to 3 MbN: Yes a MSELECTN a MOFFN cancel. a MSELECTN Displaying the handset name You can select whether or not the handset name is displayed in standby mode. The default setting is Off. Handset 1 MMENUN#105 2 MbN: Select the desired setting. a MSAVEN a MOFFN Registering a unit Operating additional units Additional handsets Up to 6 handsets can be registered to the base unit. Important:
R See page 4 for information on the available model. Registering a handset to the base unit The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, re-register the handset. 1 Handset:
2 Base unit:
Press and hold MLOCATORN for about 5 seconds. R If all registered handsets start ringing, press MLOCATORN again to stop, then repeat this step. MMENUN#130 3 Handset:
Press MOKN, then wait until a long beep sounds. For assistance, please visit http://shop.panasonic.com/support 41 2nd draft_TGF54x_(en)_ver002.pdf 41 2016/10/31 15:51:24 Caller ID Service Using Caller ID service Important:
R This unit is Caller ID compatible. To use Caller ID features, you must subscribe to a Caller ID service. Contact your phone service provider for details. Caller ID features Handset / Base unit When an outside call is being received, the caller information is displayed. Caller information for the last 50 callers is logged in the caller list from the most recent call to the oldest. R If the unit cannot receive caller information, the following is displayed:
Out of area: The caller dials from an area which does not provide a Caller ID service. Private caller*1/Private*2:
The caller requests not to send caller information. Long distance*1/Long dist.*2:
The caller makes a long distance call. R If the unit is connected to a PBX system, caller information may not be properly received. Contact your PBX supplier.
*1 Handset
*2 Base unit Missed calls Handset / Base unit If a call is not answered, the unit treats it as a missed call. The display shows Missed call. Note:
R Even when there are unviewed missed calls, Missed call disappears from the standby display if the following operation is performed by one of the units:
A handset is replaced on the base unit or charger. Pressing MOFFN on a handset. Pressing MEXITN on the base unit. Phonebook name display When caller information is received and it matches a phone number stored in the phonebook, the stored name in the phonebook is displayed and logged in the caller list. Talking Caller ID Handset / Base unit This feature lets you know who is calling without looking at the display. To use this feature, you must:
subscribe to a Caller ID service of your phone service provider. turn this feature on (page 32,35). When caller information is received, the handsets and/or base unit announce the callers name or phone number received from your phone service provider following every ring. R Name pronunciation may vary. This feature may not pronounce all names correctly. R Caller ID service has a limit of how many characters can be displayed. If the callers name is too long, the unit may not be able to display or announce the entire name. Phonebook name announcement When caller information is received and it matches a phone number stored in the phonebook, the stored name in the phonebook is announced. Caller list Important:
R Make sure the units date and time setting is correct (page 15). Viewing the caller list and calling back Handset / Base unit 1 Proceed with the operation for your unit. Handset: MCN CID 42 For assistance, please visit http://shop.panasonic.com/support 2nd draft_TGF54x_(en)_ver002.pdf 42 2016/10/31 15:51:24 Caller ID Service After the call has ended, the callers phone number is displayed in the same format as the edited number, when reviewed from the caller list. For example, you can use this feature to set the unit to ignore the area code of callers in your area, so that you can call these local numbers using caller information without dialing the area code. To activate this feature, you must edit an entry in the caller list, then call that number. After that, phone numbers from that callers area code are edited automatically. This feature can be set for each unit
(page 33). The default setting is On. Note:
R Phone numbers from the 4 most recently edited area codes are automatically edited. Erasing selected caller information Handset / Base unit 1 Proceed with the operation for your unit. Handset: MCN CID Base unit: MCIDN 2 MbN: Select the desired entry. 3 MERASEN a MbN: Yes a MSELECTN 4 Proceed with the operation for your unit. Handset: MOFFN Base unit: MEXITN Erasing all caller information Handset / Base unit 1 Proceed with the operation for your unit. Handset: MCN CID Base unit: MCIDN 2 MERASEN a MbN: Yes a MSELECTN 3 Handset: MOFFN Base unit: MEXITN Base unit: MCIDN 2 Press MCN to search from the most recent call, or MDN to search from the oldest call. 3 Proceed with the operation for your unit. Handset:
To call back, press M To exit, press MOFFN. Base unit:
To call back, press MZN. To exit, press MEXITN. N. Note:
R If the entry has already been viewed or answered, is displayed. Editing a callers phone number You can edit a phone number in the caller list by removing its area code and/or the long distance code 1. Handset 1 MCN CID 2 MbN: Select the desired entry. a MMENUN 3 MbN: Edit a MSELECTN 4 Press MEDITN repeatedly until the phone number is shown in the desired format. 5 M N Base unit 1 MCIDN 2 MbN: Select the desired entry. 3 Press MEDITN repeatedly until the phone number is shown in the desired format. 4 MZN Caller ID number auto edit feature Once you call back an edited number, the unit which was used to call back remembers the area code and format of the edited number. The next time someone calls from the same area code, caller information is customized by the unit as follows:
When the call is being received, the Caller ID number is displayed in the same format as the edited number. For assistance, please visit http://shop.panasonic.com/support 43 2nd draft_TGF54x_(en)_ver002.pdf 43 2016/10/31 15:51:24 Answering System Answering system The answering system can answer and record calls for you when you are unavailable to answer the phone. You can also set the unit to play a greeting message but not to record caller messages by selecting Greeting only as the recording time setting (page 49). Important:
R Make sure the units date and time setting is correct (page 15). Memory capacity (including your greeting message) The total recording capacity is about 17 minutes. A maximum of 64 messages can be recorded. Note:
R When message memory becomes full:
Messages full is shown on the The ANSWER ON/OFF indicator on the base unit flashes rapidly if the answering system is turned on. handset and base unit display. If you use the pre-recorded greeting message, the unit automatically switches to another pre-recorded greeting message asking callers to call again later. If you recorded your own greeting message, the same message is still announced to callers even though their messages are not recorded. Turning the answering system on/off Base unit Press MANSWER ON/OFFN to turn on/off the answering system. Handset 1 To turn on:
MMENUN#327 To turn off:
MMENUN#328 2 MOFFN Note for base unit and handset:
R When the answering system is turned on, the ANSWER ON/OFF indicator on the base unit lights up. Greeting message When the unit answers a call, a greeting message is played to callers. You can use either:
your own greeting message a pre-recorded greeting message Recording your greeting message Handset 1 MMENUN#302 2 MbN: Yes a MSELECTN 3 After a beep sounds, hold the handset about 20 cm (8 inches) away and speak clearly into the microphone (2 minutes max.). 4 Press MSTOPN to stop recording. a MOFFN Using a pre-recorded greeting message The unit provides 2 pre-recorded greeting messages:
If you reset to pre-recorded greeting or do not record your own greeting message, the unit plays a pre-recorded greeting asking callers to leave a message. is set to Greeting only, callers messages are not recorded and the unit plays a different pre-recorded greeting message asking callers to call again. If the message recording time (page 49) 44 For assistance, please visit http://shop.panasonic.com/support 2nd draft_TGF54x_(en)_ver002.pdf 44 2016/10/31 15:51:24 Resetting to a pre-recorded greeting message Use this procedure to erase your greeting message and use a pre-recorded one. Handset 1 MMENUN#304 2 MYESN a MOFFN Playing back the greeting message Handset 1 MMENUN#303 2 To exit, press MOFFN. Listening to messages Important:
R When using the base unit or handset to listen to messages, the noise reduction feature (page 19) is activated automatically in spite of the setting (
displayed). is not Using the base unit When new messages have been recorded, M N on the base unit flashes. New message is displayed. Press M N (PLAY). R During playback, M N on the base unit lights. R If new messages have been recorded, the base unit plays back new messages. R If there are no new messages, the base unit plays back all messages. Operating the answering system during playback Key MDN or MCN Operation Adjust the speaker volume Answering System Key M N N N (STOP) M M MERASEN Operation Repeat message*1 Skip message Stop playback Erase currently playing message
*1 If pressed within the first 5 seconds of a message, the previous message is played. Calling back (Caller ID subscribers only) Press MZN during playback. R To edit the number before calling back, press MEDITN repeatedly until the phone number is shown in the desired format
(page 43). Erasing all messages Press MERASEN 2 times while the unit is not in use. Using the handset When new messages have been recorded, New message is displayed. 1 To listen to new messages:
MMENUN#323 To listen to all messages:
MMENUN#324 2 When finished, press MOFFN. Note:
R To switch to the receiver, press M R You can also use the MPLAYN soft key, if N. displayed, to play new messages. Operating the answering system MMENUN a MbN: Answering device a MSELECTN Key MDN or MCN Operation Adjust the receiver/speaker volume (during playback) For assistance, please visit http://shop.panasonic.com/support 45 2nd draft_TGF54x_(en)_ver002.pdf 45 2016/10/31 15:51:24 Answering System Key 1 or MFN 2 or MEN 3 4 5 6 76 8 MPAUSEN 9 or MSTOPN 0
*4*3
*5
*6 Operation Repeat message (during playback)*1 Skip message (during playback) Enter the Settings menu Play new messages Play all messages Play greeting message Record greeting message Turn answering system on Pause message*2 Stop recording Stop playback Turn answering system off Erase currently playing message Erase all messages Reset to a pre-recorded greeting message Erasing all messages 1 MMENUN#325 2 MbN: Yes a MSELECTN a MOFFN Advanced new message alerting features Audible message alert This feature allows the base unit to beep to inform you of a new message arrival when new messages are recorded. The base unit beeps 2 times every minute until you listen to the messages, if the Base unit beep setting is turned on. The default setting is Off. Handset 1 MMENUN#339 2 MbN: Select the desired setting. a MSAVEN a MOFFN
*1 If pressed within the first 5 seconds of a
*2 To resume playback:
message, the previous message is played. MbN: Playback a MSELECTN
*3 You can also erase as follows:
MPAUSEN a MbN: Erase a MSELECTN a MbN: Yes a MSELECTN Calling back (Caller ID subscribers only) 1 Press MPAUSEN during playback. 2 MbN: Call back a MSELECTN Editing the number before calling back 1 Press MPAUSEN during playback. 2 MbN: Edit & Call a MSELECTN 3 Press MEDITN repeatedly until the phone number is shown in the desired format
(page 43). a M N New message alert by a call This feature allows you to receive a notification by phone when new messages are recorded. The base unit calls a phone number you specify. You can then operate the answering system remotely to listen to the new message. To use this feature, you must:
store a phone number to which the unit makes the call to. turn on the new message alert setting. After you answer the new message alert call, you can listen to messages from that call
(page 47). Important:
R A new message alert is stopped 1 minute after the unit starts to call. The unit will not retry the call even if the call is not answered. 46 For assistance, please visit http://shop.panasonic.com/support 2nd draft_TGF54x_(en)_ver002.pdf 46 2016/10/31 15:51:24 Storing a phone number to which the unit makes an alert call Handset n From the phonebook:
1 MMENUN#338 2 MbN: Notification to a 3 MbN: Phonebook a MSELECTN 4 MbN: Select the desired phonebook MSELECTN a MADDN entry. a MSAVEN a MOFFN n By entering a phone number:
MSELECTN a MADDN 1 MMENUN#338 2 MbN: Notification to a 3 MbN: Manual a MSELECTN 4 Enter the desired name (16 characters 5 Enter the desired number (24 digits max.). a MOKN a MSELECTN a MOFFN max.). a MOKN Turning on/off the new message alert setting Handset 1 MMENUN#338 2 MbN: On/Off a MSELECTN 3 MbN: Select the desired setting. a MSAVEN a MOFFN Editing the set phone number Handset 1 MMENUN#338 2 MbN: Notification to a MSELECTN 3 MMENUN a MbN: Edit a MSELECTN 4 Edit the name if necessary (16 characters 5 Edit the phone number if necessary (24 digits max.). a MOKN a MSELECTN a MOFFN max.). a MOKN Answering System Erasing the set phone number Handset 1 MMENUN#338 2 MbN: Notification to a MSELECTN 3 MMENUN a MbN: Erase a MSELECTN 4 MbN: Yes a MSELECTN a MOFFN R The new message alert setting is turned off. Activating/inactivating the remote access code to play messages If you activate this feature, you must enter the remote access code (page 48) to play the new message from the new message alert call. This is so that unauthorized parties cannot listen to your messages. The default setting is Inactivate. Inactivate: You can listen to the message by pressing 4 to play new messages (without entering the remote access code). Activate: You must enter your remote access code and then press 4 to play new message. Handset 1 MMENUN#338 2 MbN: Remote code a MSELECTN 3 MbN: Select the desired setting. a MSAVEN a MOFFN Listening to messages After you answer the new message alert, you can listen to the messages as follows. n When the remote access code is set to n When the remote access code is set to Inactivate:
Press 4 to play the new message during the announcement. Activate:
1 Enter the remote access code
(page 48) during the announcement. 2 Press 4 to play the new message. For assistance, please visit http://shop.panasonic.com/support 47 2nd draft_TGF54x_(en)_ver002.pdf 47 2016/10/31 15:51:24 Answering System Note:
R Within 10 seconds after listening to new messages, you can press #9 during the call to turn off the new message alert by a call feature. R Even if the unit makes a new message alert call, the handset redial list does not show the record. However, on the base unit redial list it is shown as Message alert. Remote operation Using a touch-tone phone, you can call your phone number from outside and access the unit to listen to messages or change answering system settings. The units voice guidance prompts you to press certain dial keys to perform different operations. Remote access code A 3-digit remote access code must be entered when operating the answering system remotely. This code prevents unauthorized parties from listening to your messages remotely. The default setting is 111. Important:
R To prevent unauthorized access to this product, we recommend that you regularly change the remote code. Handset 1 MMENUN#306 2 Enter the desired 3-digit remote access code. a MSAVEN a MOFFN Deactivating remote operation Press * in step 2 on Remote access code, page 48. R The entered remote access code is deleted. Using the answering system remotely 1 Dial your phone number from a touch-tone phone. 2 After the greeting message starts, enter 3 Follow the voice guidance prompts as your remote access code. necessary or control the unit using remote commands (page 48). 4 When finished, hang up. Voice guidance n When the English voice guidance is selected During remote operation, the units voice guidance starts and prompts you to press 1 to perform a specific operation, or press 2 to listen to more available operations. n When the Spanish voice guidance is selected To start the voice guidance, press 9. The voice guidance announces the available remote commands (page 48). Note:
R If you do not press any dial keys within 10 seconds after a voice guidance prompt, the unit disconnects your call. Remote commands You can press dial keys to access certain answering system functions without waiting for the voice guidance to prompt you. Key 1 2 4 5 9 Operation Repeat message (during playback)*1 Skip message (during playback) Play new messages Play all messages Stop playback*2 Start voice guidance*3 Turn answering system off 0
*4 Erase currently playing message
*5 Erase all messages
*# End remote operation
(or hang up) 48 For assistance, please visit http://shop.panasonic.com/support 2nd draft_TGF54x_(en)_ver002.pdf 48 2016/10/31 15:51:24
*1 If pressed within the first 5 seconds of a message, the previous message is played.
*2 For English voice guidance only
*3 For Spanish voice guidance only touch-tone phone. Turning on the answering system remotely 1 Dial your phone number from a 2 Let the phone ring 15 times. 3 Enter your remote access code within 10 seconds after the long beep. R The greeting message is played back. R You can either hang up, or enter your remote access code again and begin remote operation (page 48). R A long beep is heard. Answering system settings Call screening Handset / Base unit While a caller is leaving a message, you can listen to the call through the units speaker. To adjust the speaker volume, press MDN or MCN repeatedly. You can answer the call by pressing M the handset or MZN on the base unit. Call screening can be set for each unit. The default setting is On. 1 MMENUN#310 2 MbN: Select the desired setting. a 3 Proceed with the operation for your unit. MSAVEN N on Handset: MOFFN Base unit: MEXITN Number of rings before the unit answers a call You can change the number of times the phone rings Ring count before the unit Answering System answers calls. You can select 2 to 7 rings, or Toll saver. The default setting is 4 rings. Toll saver: The units answering system answers at the end of the 2nd ring when new messages have been recorded, or at the end of the 5th ring when there are no new messages. If you call your phone from outside to listen to new messages (page 48), you know that there are no new messages when the phone rings for the 3rd time. You can then hang up without being charged for the call. Handset 1 MMENUN#211 2 MbN: Select the desired setting. a MSAVEN a MOFFN Callers recording time You can change the maximum message recording time allowed for each caller. The default setting is 3 min. Handset 1 MMENUN#305 2 MbN: Select the desired setting. a MSAVEN a MOFFN Selecting Greeting only You can select Greeting only which sets the unit to announce a greeting message to callers but not record messages. Select Greeting only in step 2 on Callers recording time, page 49. Note:
R When you select Greeting only:
the unit will play the pre-recorded greeting-only message asking callers to call again later. If you do not record your own message, If you use your own message, record the greeting-only message asking callers to call again later (page 44). For assistance, please visit http://shop.panasonic.com/support 49 2nd draft_TGF54x_(en)_ver002.pdf 49 2016/10/31 15:51:24 Useful Information Voicemail service In addition to your units answering system you may also have voicemail service from your phone service provider. Voicemail is an answering service that may be offered by your phone service provider. This service can also record calls when you are unavailable to answer the phone or when your line is busy. Messages are recorded on the phone company system and not on the units answering system. R To use the voicemail service rather than the units answering system, turn off the answering system (page 44). If you have units answering system set to on and also the voicemail enabled, the system with least amount of rings will record the message first. Example:
If the units answering system is set to 4 rings
(page 49) and the voicemail answering system provided by your phone company is set to 6 rings (call your service provider), the units answering system will record the incoming call first. Storing the voicemail (VM) access number In order to listen to your voicemail messages, you must dial your phone service providers voicemail access number. Once you have stored your voicemail access number, you can dial it automatically (page 51). Handset 1 MMENUN#331 2 Enter your access number (24 digits max.). a MSAVEN a MOFFN Note:
R When storing your voicemail access number and your mailbox password, press MDN (Pause) to add pauses (page 17) between the access number and the password as necessary. Contact your phone service provider for the required pause time. Example:
To erase the voicemail access number Handset 1 MMENUN#331 2 Press and hold MCLEARN until all digits are erased. a MSAVEN a MOFFN Voicemail (VM) tone detection Handset / Base unit Your phone service provider sends special signals (sometimes called voicemail tones or stutter tones) to the unit to let you know you have new voicemail messages. If you hear a series of dial tones followed by a continuous N on the handset dial tone after you press M or press MZN on the base unit, you have new voicemail messages. Soon after you hang up a call or after the phone stops ringing, your unit checks the phone line to see if new voicemail messages have been recorded. Turn this feature off when:
You do not subscribe to voicemail service. Your phone service provider does not send voicemail tones. Your phone is connected to a PBX. If you are not sure which setting is required, contact your phone service provider. Turning VM tone detection on/off The default setting is On. Handset 1 MMENUN#332 2 MbN: Select the desired setting. a MSAVEN a MOFFN 50 For assistance, please visit http://shop.panasonic.com/support 2nd draft_TGF54x_(en)_ver002.pdf 50 2016/10/31 15:51:24 1-222-333-4444VM access numberPausesPasswordPPPP8888 Listening to voicemail messages When new messages have been recorded, Voicemail msg. via phone co.*1/
Voicemail msg.*2 are displayed if message indication service is available.
*1 Handset
*2 Base unit R The speakerphone turns on. Handset 1 MMENUN#330 2 Follow the pre-recorded instructions. 3 When finished, hang up. Note:
R You can also use the MACCESSN soft key, if displayed, to play new voicemail messages. Base unit To listen to voicemail messages, you have to dial your voicemail access number manually. Note for handset and base unit:
R If the handset and base unit still indicate there are new messages even after you have listened to all new messages, turn it off by pressing and holding # until the handset or base unit beeps. Useful Information Wall mounting The base unit can be mounted on a wall by revolving the bracket to WALLposition
(default: DESK stand position). Note:
R Make sure that the wall and the fixing method are strong enough to support the weight of the unit. Base unit 1 Turn the bracket 180 degrees counterclockwise in the WALLdirection until a click is heard. R The bracket cannot be removed. Do not turn the bracket more than180 degrees. 2 Tuck in the telephone line cord A. Connect the AC adaptor cord and telephone line cord B. Hooks For assistance, please visit http://shop.panasonic.com/support 51 2nd draft_TGF54x_(en)_ver002.pdf 51 2016/10/31 15:51:24 1AB1 Useful Information 3 Mount the unit on a wall then slidedown to secure in place. R This product is compliant with the following wall phone plate sizes (2 types). 83 mm (3 1/4 inches) 102 mm (4 inches) Fit the slots of the unit onto the corresponding wall phone plate tabs for respectively. and To stand on a desk Turn the bracket 180 degrees clockwise from the WALL position to the DESK direction until a click is heard. Charger Drive the screws (
wall. 27.2 mm (1 1/16 inches)
) (not supplied) into the 52 For assistance, please visit http://shop.panasonic.com/support 2nd draft_TGF54x_(en)_ver002.pdf 52 2016/10/31 15:51:24 12343434121212 Error messages Display message Ask phone company for VM access #
Main unit no power orNo link. Re-
connect base AC adaptor. orNo link. Busy Check tel line Error!!
Invalid Requires subscription to Caller ID. Use rechargeable battery. Useful Information Cause/solution R You have not stored the voicemail access number. Store the number (page 50). R Confirm the base units AC adaptor is connected to the unit and the power outlet correctly. R The handset has lost communication with the base unit. Move closer to the base unit and try again. R Unplug the base units AC adaptor to reset the unit. Reconnect the adaptor and try again. Re-register the handset (page 41). R The handsets registration may have been canceled. R When No link. is displayed during a power failure, place a handset on the base unit to supply power to the base unit. R The called unit is in use. R Other units are in use and the system is busy. Try again later. R The handset you are using is too far from the base unit. Move closer and try again. R The supplied telephone line cord has not been connected yet or not connected properly. Check the connections (page 10). R Recording was too short. Try again. R There is no handset registered to the base unit matching the handset number you entered. R The handset is not registered to the base unit. Register the handset (page 41). R You must subscribe to a Caller ID service. Once you receive caller information after subscribing to a Caller ID service, this message will not be displayed. R A wrong type of battery such as alkaline or manganese was inserted. Use only the rechargeable Ni-MH batteries noted on page 4, 7. For assistance, please visit http://shop.panasonic.com/support 53 2nd draft_TGF54x_(en)_ver002.pdf 53 2016/10/31 15:51:24 Useful Information Troubleshooting If you still have difficulties after following the instructions in this section, disconnect the base units AC adaptor, then reconnect the base units AC adaptor. Remove the batteries from the handset, and then insert them into the handset again. General use Problem The handset does not turn on even after installing charged batteries. The unit does not work. I cannot hear a dial tone. Cause/solution R Place the handset on the base unit or charger to turn on the handset. R Make sure the batteries are installed correctly (page 10). R Fully charge the batteries (page 11). R Check the connections (page 10). R Unplug the base units AC adaptor to reset the unit. Reconnect the adaptor and try again. R The handset has not been registered to the base unit. Register the handset (page 41). R The base units AC adaptor or telephone line cord is not connected. Check the connections. R Disconnect the base unit from the telephone line and connect the line to a known working telephone. If the working telephone operates properly, contact our service personnel to have the unit repaired. If the working telephone does not operate properly, contact your phone service provider. The base unit beeps. R New messages have been recorded. Listen to the new messages (page 45). Menu list Problem The display is in a language I cannot read. I cannot register a handset to a base unit. Battery recharge Problem The handset beeps and/or flashes. Cause/solution R Change the display language (page 14). R The maximum number of handsets (6) is already registered to the base unit. Cancel unused handset registrations from the base unit (page 41). Cause/solution R Battery charge is low. Fully charge the batteries (page 11). 54 For assistance, please visit http://shop.panasonic.com/support 2nd draft_TGF54x_(en)_ver002.pdf 54 2016/10/31 15:51:24 Useful Information Cause/solution R Clean the battery ends (
,
) and the charge contacts with a dry cloth and charge again. R It is time to replace the batteries (page 10). Problem I fully charged the batteries, but the operating time seems to still flashes, is displayed, or be shorter. Making/answering calls, intercom Problem is displayed. Noise is heard, sound cuts in and out. The handset does not ring. The base unit does not ring. I cannot make a call. I cannot make long distance calls. I cannot use voice paging. Cause/solution R The handset is too far from the base unit. Move closer. R The base units AC adaptor is not properly connected. Reconnect AC adaptor to the base unit. R The handset is not registered to the base unit. Register it
(page 41). R You are using the handset or base unit in an area with high electrical interference. Re-position the base unit and use the handset away from sources of interference. R Move closer to the base unit. R If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL provider for details. R The ringer volume is turned off. Adjust the ringer volume
(page 35, page 35). R Silent mode is turned on. Turn it off (page 37). R The ringer volume is turned off by pressing and holding 0
) again to turn it on (page 18). R The ringer volume is turned off. Adjust the ringer volume
). Press and hold 0(
(
(page 18). R Silent mode is turned on. Turn it off (page 37). R The dialing mode may be set incorrectly. Change the setting (page 15). R Make sure that you have long distance service. R You cannot use voice paging if other units are in use. R Voice paging is not available when a range extender
(KX-TGA405) is registered to the base unit. For assistance, please visit http://shop.panasonic.com/support 55 2nd draft_TGF54x_(en)_ver002.pdf 55 2016/10/31 15:51:24 Useful Information Caller ID/Talking Caller ID Problem Caller information is not displayed. Caller information is displayed or announced late. Caller information is not announced. The caller list/incoming phone numbers are not edited automatically. I cannot dial the phone number edited in the caller list. Time on the unit has shifted. The 2nd callers information is not displayed during an outside call. Cause/solution R You must subscribe to Caller ID service. Contact your phone service provider for details. R If your unit is connected to any additional telephone equipment such as a Caller ID box or cordless telephone line jack, plug the unit directly into the wall jack. R If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL provider for details. R The name display service may not be available in some areas. Contact your phone service provider for details. R Other telephone equipment may be interfering with this unit. Disconnect the other equipment and try again. R Depending on your phone service provider, the unit may display or announce the callers information at the 2nd ring or later. R Move closer to the base unit. R The handset or base units ringer volume is turned off. Adjust it (page 18, 35). R The Talking Caller ID feature is turned off. Turn it on R The number of rings for the answering system is set to 2
(page 32,35 ). rings or Toll saver. Select a different setting
(page 49). R If the base unit and another handset are having an intercom call, your handset does not announce caller information. R The Caller ID number auto edit feature is turned off. Turn it on and try again (page 33). R You need to call back the edited number to activate Caller ID number auto edit. R The phone number you dialed might have been edited incorrectly (for example, the long distance 1 or the area code is missing). Edit the phone number with another pattern (page 43). changes the time. Set the time adjustment to Manual
(off) (page 32). R Incorrect time information from incoming Caller ID R In order to use Caller ID, call waiting, or Call Waiting Caller ID (CWID), you must first contact your phone service provider and subscribe to the desired service. After subscribing, you may need to contact your phone service provider again to activate this specific service, even if you already subscribed to both Caller ID and Call Waiting with Caller ID services (CWID). 56 For assistance, please visit http://shop.panasonic.com/support 2nd draft_TGF54x_(en)_ver002.pdf 56 2016/10/31 15:51:24 Answering system Problem The unit does not record new messages. I cannot operate the answering system remotely. The unit does not emit the specified number of rings. Voicemail Problem Voicemail msg. via phone co. is shown on the handset display. or Voicemail msg. is shown on the base unit display. How do I remove this message from the display?
Useful Information messages (page 45, 46). Cause/solution R The answering system is turned off. Turn it on (page 44). R The message memory is full. Erase unnecessary R The recording time is set to Greeting only. Change R Your phone service providers voicemail service may be answering your calls before the units answering system can answer your calls. Change the units number of rings setting (page 49) to a lower value, or contact your phone service provider. the setting (page 49). R The answering system will not answer incoming calls while the other devices such as handsets are engaged in a call. R The remote access code is not set. Set the remote access code (page 48). R You are entering the wrong remote access code. If you have forgotten your remote access code, enter the remote access code setting to check your current code
(page 48). R The answering system is turned off. Turn it on (page 49). R If the first ring is turned off (No) (page 24), the number of rings decreases by 1 from the specified number of rings. Cause/solution R This notification is displayed when your phone service providers voicemail service (not the units answering system) has recorded a message for you. Typically you can remove this notification from the display by listening to the message. To listen to the message, dial the voicemail number provided by your phone service provider (for most cases, this will be your own phone number), and follow the voice instructions. Depending on your phone service provider, you may need to remove all messages from your voice mailbox to remove the notification. You can also remove this notification by pressing and holding # until the unit beeps. For assistance, please visit http://shop.panasonic.com/support 57 2nd draft_TGF54x_(en)_ver002.pdf 57 2016/10/31 15:51:24 Useful Information Liquid damage Problem Liquid or other form of moisture has entered the handset/base unit. Cause/solution R Disconnect the AC adaptor and telephone line cord from the base unit. Remove the batteries from the handset and leave to dry for at least 3 days. After the handset/base unit are completely dry, reconnect the AC adaptor and telephone line cord. Insert the batteries and charge fully before use. If the unit does not work properly, contact an authorized service center. Caution:
R To avoid permanent damage, do not use a microwave oven to speed up the drying process. 58 For assistance, please visit http://shop.panasonic.com/support 2nd draft_TGF54x_(en)_ver002.pdf 58 2016/10/31 15:51:24 FCC and other information Useful Information For assistance, please visit http://shop.panasonic.com/support 59 2nd draft_TGF54x_(en)_ver002.pdf 59 2016/10/31 15:51:24 This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:ACJ----------.If requested, this number must be provided to the telephone company.L Registration No.............(found on the bottom of the unit)L Ringer Equivalence No. (REN).......0.1BA plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with the product. It is designed to be connected to a compatible modular jack that is also compliant.The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for the product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3).If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn't practical, the telephone company will notify the customer as soon as possible. Also, you will beadvised of your right to file a complaint with the FCC if you believe it is necessary.The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.If trouble is experienced with this equipment, for repair or warranty information, please contact a Factory Service Center or other Authorized Servicer. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information.If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section 68.316.When you hold the phone to your ear, noise might be heard in your Hearing Aid. Some Hearing Aids are not adequately shielded from external RF (radio frequency) energy. If noise occurs, use an optional headset accessory or the speakerphone option (if applicable) when using this phone. Consult with your audiologist or Hearing Aid Useful Information 60 For assistance, please visit http://shop.panasonic.com/support 2nd draft_TGF54x_(en)_ver002.pdf 60 2016/10/31 15:51:24 manufacturer about the availability of HearingAids which provide adequate shielding to RF energy commonly emitted by digital devices.WHEN PROGRAMMING EMERGENCYNUMBERSAND(OR) MAKING TESTCALLSTO EMERGENCY NUMBERS:1) Remain on the line and briefly explain to the dispatcher the reason for the call.2) Perform such activities in the off-peakhours, such as early morning or late evenings.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Privacy of communications may not be ensured when using this phone.CAUTION:Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this device.NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. Thisequipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined byturning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.Some cordless telephones operate at frequencies that may cause interference to nearby TVs and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. If interference is experienced, move the cordless telephone further away from the TV or VCR. This will often reduce or eliminate interference.FCC RF Exposure Warning:L This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. L To comply with FCC RF exposure requirements, the base unit must be installed and operated 20 cm (8 inches) or more between the product and all persons body. L This product may not be collocated or operated in conjunction with any other antenna or transmitter.L The handset may be carried and operated with only the specific provided belt-clip. Other non-tested belt-clips or similar body-worn accessories may not comply and must be avoided.Notice:L FCC ID can be found inside the battery compartment or on the bottom of the units. Useful Information For assistance, please visit http://shop.panasonic.com/support 61 2nd draft_TGF54x_(en)_ver002.pdf 61 2016/10/31 15:51:24 Compliance with TIA-1083 standard: Telephone handsets identified with this logo have reduced noise and interference when used with T-Coil equipped hearing aids and cochlear implants.TCompatible withHearing Aid T-CoilTIA-1083 Gua Rpida Espaola Gua Rpida Espaola 62 Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) 2nd draft_TGF54x_(en)_ver002.pdf 62 2016/10/31 15:51:24 ConexionesUnidad base1 Conecte el adaptador de corriente alterna a la unidad presionndolo firmemente.2 Enganche el cable para fijarlo.3 Conecte el adaptador de corriente alterna a la toma de corriente.4 Conecte el cable de la lnea telefnica a la unidad, y despus a la toma telefnica de una sola lnea (RJ11C) hasta que escuche un clic.5 Se requiere un filtro DSL/ADSL (no incluido) si tiene este tipo de servicio.Nota:LUse solo el adaptador de corriente alterna Panasonic PNLV226 que se suministra.445312Cargador1 Conecte el adaptador de corriente alterna a la toma de corriente.1 Gua Rpida Espaola Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) 63 2nd draft_TGF54x_(en)_ver002.pdf 63 2016/10/31 15:51:25 Instalacin y carga de la bateraCargue aproximadamente durante 7 horas.Nota:LUTILICE SOLO bateras recargables de Ni-MH tamao AAA (R03) ().LNO utilice bateras alcalinas, de manganeso ni de Ni-Cd.LConfirme que las polaridades estn correctas (S, T).LCambie el idioma de la pantalla.LConfirme que aparezca Cargando ().Retire la batera2142311212 Gua Rpida Espaola 64 Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) 2nd draft_TGF54x_(en)_ver002.pdf 64 2016/10/31 15:51:25 Sugerencias de operacinTeclas de funcinAl oprimir una tecla de funcin, puede seleccionar la funcin que aparece directamente encima de ella en la pantalla. Preste atencin a la pantalla para ver qu funciones estn asignadas a las teclas de funcin durante la operacin.Tecla navegadoraAuricular:{^}, {V}, {<}, o {>}: Navegue por diversas listas y elementos.VOL. (Volumen: {^} o {V}): Ajuste el volumen del receptor o el altavoz mientras habla.{<} k: Vea la entrada del directorio telefnico.{>} REDIAL (Remarcacin): Vea la lista de remarcacin.{V} CID (identificador de llamadas): Vea la lista de personas que llamaron.Unidad base:{^}, {V}, {7}, o {8}: Navegue por diversas listas y elementos.VOLUME (Volumen: {^} o {V}): Ajuste el volumen del altavoz mientras habla.{7}/{8}: Repetir u omitir el mensaje durante la reproduccin. Auricular Unidad baseCambio de idiomas (predeterminado: English)Cuando instale las bateras por primera vez, es posible que aparezca Set date/time Press SELECT. Oprima {OFF} para salir.Idioma de la pantalla (Auricular/Unidad base)1{MENU}(11) s {r}: Espaol2Contine operando su unidad.Auricular: {GUARDAR} s {OFF}Unidad base: {GUARDA} s {EXIT}Idioma de la gua de voz (Auricular){MENU}(112 s {r}: Espaol s {GUARDAR} s {OFF}Fecha y hora (Auricular)1{MENU}(1)12Introduzca el da, mes y ao actuales. s {OK}3Introduzca la hora y minuto actuales (formato de reloj de 24 horas).4{GUARDAR} s {OFF}{V}{^}{<}{>}{V}{^}{7}{8}Gua Rpida Espaola Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) 65 2nd draft_TGF54x_(en)_ver002.pdf 65 2016/10/31 15:51:25 Cmo grabar el mensaje de saludo del contestador de llamadas (Auricular)Puede grabar su propio mensaje de saludo en lugar de usar uno pregrabado.1{MENU}(3)2 s {r}: S s {SELEC.}2Despus de que se emita un pitido, sostenga el auricular a una distancia aproximada de 20 cm (8 pulgadas) y hable con claridad en el micrfono (mx. de 2 minutos).3Oprima {PARAR} para dejar de grabar. s {OFF}Operaciones bsicasCmo hacer y contestar llamadas (Auricular/Unidad base)Para hacer llamadasAuricular: Marque el nmero telefnico. s {C}/{s}Unidad base: Marque el nmero telefnico. s {s}Para contestar llamadasAuricular: {C}/{s}Unidad base: {s}Para colgarAuricular: {OFF}Unidad base: {s}Para ajustar el volumen del receptor o del altavozOprima {^} o {V} repetidamente mientras habla.Cmo hacer una llamada usando la lista de remarcacinAuricular:{>} REDIAL s {r}: Seleccione la entrada deseada. s {C}Unidad base:{REDIAL} s {r}: Seleccione la entrada deseada. s {s}Para ajustar el volumen del timbreOprima {^} o {V} repetidamente para seleccionar el volumen deseado mientras timbra.Directorio telefnicoPara aadir entradas(Auricular)1{<} k s {MENU}2{r}: Agregar Ent. Nueva s {SELEC.}3Introduzca el nombre de la persona (mx. 16 caracteres). s {OK}4Introduzca el nmero telefnico de la persona (mx. 24 dgitos). s {OK}5{r}: Seleccione el grupo deseado. s {SELEC.} 2 veces s {OFF}LEn el paso 3, puede cambiar el idioma de introduccin de caracteres. ( s {r}: Seleccione el idioma deseado. s {OK}Para hacer llamadas(Auricular/Unidad base)1Contine operando su unidad.Auricular: {<} kUnidad base: {k}2{r}: Seleccione la entrada deseada.3Contine operando su unidad.Auricular: {C}Unidad base: {s} Gua Rpida Espaola 66 Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) 2nd draft_TGF54x_(en)_ver002.pdf 66 2016/10/31 15:51:25 Sistema contestador de llamadas (Unidad base)Contestador encendido/apagadoOprima {ANSWER ON/OFF} para encender y apagar el contestador de llamadas.Para escuchar mensajes{P} (PLAY)Sistema contestador de llamadas (Auricular)Para escuchar mensajesPara escuchar mensajes nuevos:{REPRO.} o {MENU}(323Para escuchar todos los mensajes:{MENU}(324Preguntas frecuentesPreguntaCausa y solucinPor qu aparece _?LEl auricular est demasiado lejos de la unidad base. Acrquelo.LEl adaptador para corriente de la unidad base no est conectado correctamente. Conecte de nuevo el adaptador para corriente a la unidad base.LEl auricular no est registrado en la unidad base. Regstrelo.1Auricular: {MENU}(13)2Unidad base: Oprima y mantenga oprimido {LOCATOR} durante aproximadamente 5 segundos.3Auricular: Oprima {OK}, y despus espere hasta que suene un pitido largo. Cmo se incrementa el nivel de volumen del auricular?LOprima la tecla de volumen {^} repetidamente mientras habla.Por qu hay ruido o se corta la conversacin?LTrate de reubicar la unidad base de forma que se minimice la distancia al auricular.LSi ocurre el mismo problema aunque el auricular se encuentre enseguida de la unidad base,visite: http://shop.panasonic.com/supportEs posible aadir otro auricular accesorio a mi unidad base?LS, puede aadir hasta 6 auriculares (incluyendo los que se venden con su unidad base) a una sola unidad base.LPara adquirir auriculares accesorios adicionales (KX-TGFA50), visite: http://shop.panasonic.com/support Los usuarios TTY (usuarios con impedimentos auditivos o del habla) pueden llamar al 1-877-833-8855.Es posible mantener cargando las bateras todo el tiempo?LPuede dejar el auricular en la unidad base o el cargador en cualquier momento. Esto no daa las bateras.Cmo se contestan las llamadas en espera (segunda llamada)?LOprima {CALL WAIT} cuando escuche el tono de llamada en espera.Operaciones bsicas Customer services Appendix For assistance, please visit http://shop.panasonic.com/support 67 2nd draft_TGF54x_(en)_ver002.pdf 67 2016/10/31 15:51:25 Accessories!hp://shop.panasonic.com/supportCustomer Services DirectoryShopfor all your Panasonic gearGo to Get everything you need to get the most out ofyour Panasonic products Accessories & Parts for your Camera, Phone, A/V products, TV, Computers & Networking, Personal Care, Home Appliances, Headphones, Baeries, Backup Chargers & moreFor Product Informaon, Operang Assistance, Parts, Owners Manuals, Dealer and Service infogo to hp://shop.panasonic.com/supportFor the hearing or speech impaired TTY: 1- 877-833-8855 As of June 2015 Appendix Limited Warranty (ONLY FOR U.S.A.) 68 For assistance, please visit http://shop.panasonic.com/support 2nd draft_TGF54x_(en)_ver002.pdf 68 2016/10/31 15:51:25 Limited Warranty Coverage (For USA Only)LaborOne (1) YearPartsOne (1) YearTo submit a new repair request and for quick repair status visit our Web Site athttp://shop.panasonic.com/supportPanasonic Products Limited WarrantyOnline Repair RequestMail-In Service--Online Repair RequestIf your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as the warrantor) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (warranty period), at its option either (a) repair your product with new or refurbished parts,(b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor.During the Labor warranty period there will be no charge for labor. During the Parts warranty period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies to products purchased and serviced in the United States.This warranty is extended only to the original purchaser of a new product which was not sold as is.TelephoneWhen shipping the unit, carefully pack, include all supplied accessories listed in the Owners Manual, and send it prepaid, adequately insured and packed well in a carton box. When shipping Lithium Ion batteries please visit our Web Site at http://shop.panasonic.com/support as Panasonic is committed to providing the most up to date information. Include a letter detailing the complaint, a return address and provide a daytime phone number where you can be reached. A valid registered receipt is required under the Limited Warranty.IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.Product or Part Name Appendix For assistance, please visit http://shop.panasonic.com/support 69 2nd draft_TGF54x_(en)_ver002.pdf 69 2016/10/31 15:51:25 Limited Warranty Limits and Exclusions(As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage to media or images, data or other memory or recorded content. The items listed are not exclusive, but for illustration only.)This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God.THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY COVERAGE.THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you.This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to: Consumer Affairs Department Panasonic Corporation of North America 661 Independence Pkwy Chesapeake, VA 23320As of June 2015 Index Index
#
3-way conference: 20 A Additional handset: 41 Alarm: 37 Answering calls: 18 Answering system Call screening: 49 Erasing messages: 45, 46, 48 Greeting message: 44 Greeting only: 49 Listening to messages: 45, 48 New message alerting: 46 Number of rings: 49 Recording time: 49 Remote access code: 48 Remote operation: 48 Ring count: 49 Toll saver: 49 Turning on/off: 44 Auto intercom: 21 Auto talk: 18, 34 B Baby monitor: 38 Battery: 10, 11 Booster (Clarity booster): 19 C Call block: 23 One ring for blocked call: 24 Call share: 19, 34 Call waiting: 19 Call Waiting Caller ID: 19 Caller ID number auto edit: 33, 36, 43 Caller ID service: 42 Caller list: 42 Caller list edit: 43 Chain dial: 28 CID (Caller ID): 42 Conference calls: 20 Control type: 13, 14 Customer support: 34, 36 D Date and time: 15 Dialing mode: 15 Direct command code: 30 Display Contrast: 33, 35 Language: 14 Eco mode: 12 Equalizer: 19 Error messages: 53 Flash: 19, 34 E F 70 G Groups: 27 H Handset Deregistration: 41 Name: 40 Registration: 41 Hold: 18 Intercom: 20 I K Key detector: 33, 35 Key tone: 33 Line mode: 34 Low battery alert: 15 L M Making calls: 17 Missed calls: 42 Mute: 18 S N Noise reduction: 19 P Pause: 17 Phonebook: 26 Power failure (power backup operation): 21 R Redialing: 17 Ringer ID: 27 Ringer tone: 32 Rotary/pulse service: 19 Silent mode: 37 Speed dial: 29 SP-PHONE (Speakerphone): 17 Talking Caller ID: 42 Temporary tone dialing: 19 Time adjustment: 32 Transferring calls: 20 Troubleshooting: 54 TTY: 67 VM (Voicemail): 50 Voice announcement language: 15 Voice paging: 21 Voicemail: 50 Volume V T Receiver: 17 Ringer (Base unit): 18 Ringer (Handset): 18 Ringer (handset): 32 Ringer for intercom call (Handset): 32 Speaker: 17 W Wall mounting: 51 2nd draft_TGF54x_(en)_ver002.pdf 70 2016/10/31 15:51:25 Notes 71 2nd draft_TGF54x_(en)_ver002.pdf 71 2016/10/31 15:51:25 For your future reference We recommend keeping a record of the following information to assist with any repair under warranty. Serial No.
(found on the bottom of the base unit) Name and address of dealer Date of purchase Attach your purchase receipt here. Panasonic System Networks Co., Ltd. 2017 Printed in Malaysia
*PNQX8364ZA*
*PNQX8364ZA*
PNQX8364ZA PP1116HD0 2nd draft_TGF54x_(en)_ver002.pdf 72 2016/10/31 15:51:25 1 Reconnect AC adaptor to the base unit.2 Check if telephone line cord is connected.3 Use rechargeable Ni-MH batteries. (Alkaline/Manganese/Ni-Cd batteries CANNOT be used.)4 Read troubleshooting page in the Operating Instructions.Visit our Web site: http://shop.panasonic.com/supportLFAQ and troubleshooting hints are available.If your product is not working properly. IMPORTANT!Two Riverfront Plaza, Newark, NJ 07102-5490
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2016-12-13 | 1921.536 ~ 1928.448 | PUB - Part 15 Unlicensed PCS Base Station | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2016-12-13
|
||||
1 | Applicant's complete, legal business name |
Panasonic Corporation of North America
|
||||
1 | FCC Registration Number (FRN) |
0003762242
|
||||
1 | Physical Address |
Two Riverfront Plaza, 9th Floor
|
||||
1 |
Newark, New Jersey 07102-5490
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
s******@nemko.com
|
||||
1 | TCB Scope |
A3: Unlicensed Personal Communication System (PCS) devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
ACJ
|
||||
1 | Equipment Product Code |
96NKX-TGF540
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
B******** B********
|
||||
1 | Title |
Project Manager
|
||||
1 | Telephone Number |
201-3********
|
||||
1 | Fax Number |
201-3********
|
||||
1 |
B******@us.panasonic.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 01/27/2017 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | PUB - Part 15 Unlicensed PCS Base Station | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | DECT 6.0 Base | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | Yes | ||||
1 | Grant Comments | Output power listed is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Nemko AS
|
||||
1 | Name |
F**** S******
|
||||
1 | Telephone Number |
47-22********
|
||||
1 | Fax Number |
47-22********
|
||||
1 |
f******@nemko.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15D | 68 | 1921.53600000 | 1928.44800000 | 0.0690000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC