Panasonic Installation Manual Additional Digital Cordless Handset Model No. Thank you for purchasing a Panasonic product. This unit is an additional handset compatible with the following series of Panasonic Digital Cordless Phone:
KX-TGF340/KX-TGF350/KX-T GF370/KX-TGF380
(The corresponding models are subject to change without notice.) You must register this handset with your base unit before it can be used. This installation manual describes only the steps needed to register and begin using the handset. Please read the base unit's operating instructions for further details. Please read this installation manual before using the unit and save it for future reference. For your safety To prevent severe injury and loss of life/property, read this section carefully before using the product to ensure proper and safe operation of your product. Z\WARNING Power connection Completely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire.
@ Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire.
@ Unplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact us at http://shop.panasonic.com/support Installation
@ To prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture. Do not place or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident. aoooooosccessTOTOrrm Accessory information Supplied accessories Le
[Rechargeable bateresHHRADPA SC Handset cover2 4 feet? SSCSCSC~S*S*S*~S*CCCSCSST 1 PNLC1040ZB (Black), PNLC1040ZS (Silver), PNLC1040ZN (Champagne
*2 The handset cover comes attached to the handset.
*3. PNYNTGAG80BR (Black), PNYNTGFA3ONR (White)
*4. PNKE1268Z1 (Black), PNKE1268Z3 (White) Note:
@ Please read the base unit's operating instructions for additional/replacement accessories. Optional headsets: KX-TCA60, KX-TCA93, KX-TCA400, KX-TCA430 Z\CAUTION Installation and location
@ The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the product and is easily accessible. Battery
@ We recommend using the supplied batteries or additional/replacement batteries noted on page 2 for replacement battery information. USE ONLY rechargeable Ni-MH batteries AAA (R03) size. Do not mix old and new batteries. Do not open or mutilate the batteries. Released electrolyte from the batteries is corrosive and may cause burs or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed.
@ Exercise care when handling the batteries. Do not allow conductive materials such as rings, bracelets, or keys to touch the batteries, otherwise a short circuit may cause the batteries and/or the conductive material to overheat and cause bums. Charge the batteries provided with or identified for use with this product only, in accordance with the instructions and limitations specified in this manual. Only use a compatible base unit (or charger) to charge the batteries. Do not tamper with the base unit (or charger). Failure to follow these instructions may cause the batteries to swell or explode. Attention:
A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY
(1-800-822-8837) for information on how to recycle this battery. Important safety instructions When using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
1. Do not use this product near water for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool. 2. Do not use the telephone to report a gas leak in the vicinity of the leak. 3. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. SAVE THESE INSTRUCTIONS Setting up Connections/Wall mounting
@ Connect the AC adaptor to the power outlet.
@ Drive the screws (@)) (not supplied) into the wall, if necessary.
@ 27.2 mm (1 1/16 inches) Note:
@ The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) Make sure that the wall and the fixing method are strong enough to support the weight of the unit. Battery installation/Battery charging Important:
Use the supplied rechargeable batteries. For replacement, we recommend using the Panasonic rechargeable batteries noted on page 2. USE ONLY rechargeable Ni-MH batteries AAA (R03) size (@). Do NOT use alkaline/manganese/Ni-Cd batteries. Confirm correct polarities (), ). Charge for about 7 hours. Confirm charging is displayed ().
@ When the batteries are fully charged, Fully charged is displayed. Note:
If the batteries are fully charged, but the operating time seems to be shorter, clean the battery ends (), ) and the charge contacts with a dry cloth and charge again. Registering a handset to a base unit 1 Base unit:
Press and hold [LOCATOR] for about 5 seconds. If all registered handsets start ringing, press [LOCATOR] again to stop, then repeat this step. 2 Handset:
Place the handset on the base unit or charger, then wait until a long beep sounds and is displayed. Note:
fan error tone sounds, or if is displayed, register the handset according to the base unit's operating instructions. Display language 1 [MENUDO 2 [4]: Select the desired setting. > [SAVE] > [OFF]
FCC and other information This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section 68.316. When you hold the phone to your ear, noise might be heard in your Hearing Aid. Some Hearing Aids are not adequately shielded from external RF (radio frequency) energy. If noise occurs, use an optional headset accessory or the speakerphone option (if applicable) when using this phone. Consult with your audiologist or Hearing Aid manufacturer about the availability of Hearing Aids which provide adequate shielding to RF energy commonly emitted by digital devices. WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST CALLS TO EMERGENCY NUMBERS:
1) Remain on the line and briefly explain to the dispatcher the reason for the call. 2) Perform such activities in the off-peak hours, such as early morning or late evenings. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause hannful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this phone. CAUTION:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device. NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the :
receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC RF Exposure Warning:
@ This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. This handset may not be collocated or operated in conjunction with any other antenna or transmitter. The handset may be carried and operated with only the specific provided belt-clip. Other non-tested belt-clips or similar body-worn accessories may not comply and must be avoided. Notice:
@ FCC ID can be found inside the battery compartment or on the bottom of the unit. Compliance with TIA-1083 standard foeisae | elephone handsets identified with this logo have reduced eit noise and interference when used with T-Coil equipped hearing aids and cochlear implants. TIA-1083 Notice:
This product is designed for use in the United States of America. Sale or use of this product in other countries may violate local laws. Cet appareil est concu pour tre utilis aux Etats-Unis d'Amrique. La vente ou l'emploi de cet appareil dans certains autres pays peut constituer une infraction a la lgislation locale.
@Este producto esta disefiado para usarse en los Estados Unidos de Amrica. La venta 0 el empleo de este producto en ciertos paises puede constituir violacin de la legislacin local.
*AELSARAFAMM: SERHBRAGNEA WHA SAA o ecCORRIt, BABACORMEBME LCTREHENTHY,. BABATO MASEBABREGVET. HOT. SUHTIARBAICSUTISMAEL THEBES ENDY-EAILKLARET.