9TGCF-TW71 Personal Computer, Models Cf T71 And Cf W71 by Panasonic

exhibit
download
text

1 2 3 4

Final User Manual for T7

Users Manual

pdf

1.45 MiB

May 11 2007

OPERATING INSTRUCTIONS Personal Computer Model No. CF-T7 series Contents Getting Started Introduction.................................................2 Read Me First..............................................3 Description of Parts .....................................11 First-time Operation .....................................13 d e t r a t S g n i t t e G Useful Information On-screen Manual.......................................20 Handling and Maintenance.............................21 Expanding Memory......................................23 Hard Disk Backup/Restore Function ..................25 Hard Disk Data Erase Utility ...........................26 Reinstalling Software....................................27 Troubleshooting Troubleshooting (Basic)/Error Code/Message.......28 Hardware Diagnostics...................................32 Appendix LIMITED USE LICENSE AGREEMENT..............34 Specifications ............................................36 LIMITED WARRANTY ..................................38 For further information about the com-

puter, you can refer to the on-screen manual. To access the on-screen manual

page 20 On-screen Manual For your technical support office, refer to LIMITED WARRANTY. Please read these instructions carefully before using this product and save this manual for future use. n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A Introduction Thank you for purchasing this Panasonic computer. For optimum performance and safety, please read these instruc-

tions carefully.

Terms and illustrations in these instructions

CAUTION

NOTE Enter :

Fn + F5 :

Conditions that may result in minor or moderate injury. Useful and helpful information. Press [Enter] key. Press and hold [Fn] key, and then press [F5] key.

(Start) - [All Programs] : Click

(Start), and then click [All Programs].

Page in these Operating Instructions.

Reference to the on-screen manuals.

Some illustrations are simplified to help your understanding and may look different from the actual unit.

If you do not log on as an administrator, you cannot use some functions or cannot display some screens.

Refer for the latest information about optional products to the catalogs, etc.

In these instructions, the names and terms are referred as follows. Windows Vista Business as Windows or Windows Vista

The display modes are referred as follows. ( ) indicates the terms in [Intel Graphics Media Accelerator Driver for mobile] screen. To display the screen, right-click the desktop and click [Graphics Properties]. Internal LCD (Notebook): The computers display External display (Monitor): External display Simultaneous display (Intel (R) Dual Display Clone): The same screen is displayed on the internal LCD and the external display. Extended Desktop: The extended working area across the internal LCD and the external display.

Copyright This manual is copyrighted by Matsushita Electric Industrial Co., Ltd. with all rights reserved. No part of this manual may be reproduced in any form without the prior written permission of Matsushita Electric Industrial Co., Ltd. No patent liability is assumed with respect to the use of the information contained herein. 2007 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.

Disclaimer Computer specifications and manuals are subject to change without notice. Matsushita Electric Industrial Co., Ltd. assumes no liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the com-

puter and the manuals.

Trademarks Microsoft, Windows, Windows Vista, IntelliMouse and the Windows logo are registered trademarks or trademarks of Microsoft Corporation of the United States and/or other countries. Intel, Core and Centrino are either registered trademarks or trademarks of Intel Corporation. SD Logo is a trademark. Adobe, the Adobe logo and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorpo-

rated in the United States and/or other countries. Computrace is a registered trademark of Absolute Software Corp. Bluetooth is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Matsushita Electric Industrial Co., Ltd. Panasonic is a registered trademark of Matsushita Electric Industrial Co., Ltd. Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective own companies. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 2 mark on the bottom of the computer>

Read Me First receiver. Models for U.S.A.

<Only for model with a Federal Communications Commission Radio Fre-

quency Interference Statement Note: This equipment has been tested and found to com-

ply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-

ence in a residential installation. This equipment gener-

ates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recep-

tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and

Connect the equipment into an outlet on a circuit differ-

ent from that to which the receiver is connected.

Consult the Panasonic Service Center or an experi-

enced radio/TV technician for help. Warning To assure continued compliance, use only shielded inter-

face cables when connecting to a computer or peripheral. Also, any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. 6-M-1 FCC RF Exposure Warning:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment must be installed and operated in accordance with provided instructions and minimum 1.5 cm spacing must be provided between antenna and all persons body (excluding extremities of hands, wrist and feet) during wireless modes of operation.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This computer is provided with a PC Card slot that could be used with wireless transmitter(s), which will be specifically recommended, when they become available. Other third-party wireless transmitter(s) have not been RF exposure evaluated for use with this computer and may not comply with FCC RF exposure requirements.

This product is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range. FCC requires this product to be used indoors for the fre-

quency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite sys-

tems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and /or dam-

age this product. 25-M-2-1 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received, includ-

ing interference that may cause undesired operation. Responsible Party: Panasonic Corporation of North America One Panasonic Way Secaucus, NJ 07094 Tel No:1-800-LAPTOP5 (1-800-527-8675) 6-M-1 FCC Regulation Notice for modem This equipment contains a FCC approved modem. 1. This equipment complies with CFR47 Part 68 rules. On the computer is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If required, this information must be provided to the tele-

phone company. 2. An FCC compliant telephone cord and modular plug is provided with this equipment. This equipment is designed to be connected to the telephone network or premises wiring using a compatible modular jack which is Part 68 compliant. See Installation Instruc-

tions for details. 4. 3. The REN is used to determine the quantity of devices which may be connected to the telephone line. Exces-

sive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all area, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as deter-

mined by the total RENs, contact the local telephone company. If your telephone equipment cause harm to the tele-

phone network, the telephone company will notify you in advice that temporary discontinuance of service may be required. But if advice notice isnt practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. 5. The telephone company may take changes in its facili-

ties, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service. If trouble is experienced with this equipment, for repair or warranty information, please contact Panasonic Corporation of North America at DIAL TOLL FREE 1-

800-LAPTOP5 (1-800-527-8675). If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equip-

ment until the problem is resolved. 7. There are no user serviceable parts contained in this 6. equipment. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 3 Read Me First 8. This equipment may not be used on coin service pro-

vided by the telephone company. Connection to party lines is subject to state tariffs. 9. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone fax machine unless such message clearly contains in a margin at the top or bottom of each trans-

mitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entry, or other individual sending the message and the telephone number of the sending machine or such business, other entity, or individual. In order to program this information into your fax soft-

ware, you should refer to the manual of the Fax soft-

ware being used. 10.According to the FCCs electrical safety advisory, we recommend that you may install an AC surge arrestor in the AC outlet to which this equipment is connected. Telephone companies report that electrical surges, typically lightning transients, are very destructive to customer terminal equipment connected to AC power sources and that this is a major nationwide problem. Caution : To reduce the risk of fire, use only No.26 AWG or larger telecommunication line cord. ATTENTION : Pour rduire le risque dincendie, utiliser uniquement des conducteurs de tlcommunications 26 AWG ou de section suprieure. 16-M-1 Notice for the products using LCD This product uses one or more fluorescent lamps contain-

ing a small amount of mercury. It also contains lead in some components. Disposal of these materials may be regulated in your community due to environmental consid-

erations. For disposal or recycling information please contact your local authorities, or the Electronics Industries Alliance:

<http://www.eiae.org/>

This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material- special handling may apply. See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/

38-M-1 24-M-1 Safety Precautions

The following safety precautions must be observed during all phases of the operation, usage, service or repair of any Personal Computer or Handheld Computer incorporating Wireless WAN. Manufacturers of the cellular terminal are advised to convey the following safety information to users and operating personnel and to incorporate these guidelines into all manuals supplied with the product. Failure to comply with these precautions violates safety standards of design, manufacture and intended use of the product. Panasonic assumes no liability for customer failure to comply with these precautions. When in a hospital or other health care facility, observe the restrictions on the use of mobiles. Switch Personal Computer or Handheld Computer incorporating Wireless WAN off, if instructed to do so by the guidelines posted in sensitive areas. Medical equipment may be sensitive to RF energy. The operation of cardiac pacemakers, other implanted medical equipment and hearing aids can be affected by interference from Personal Computer or Handheld Computer incorporating Wireless WAN placed close to the device. If in doubt about potential danger, contact the physician or the manufacturer of the device to verify that the equipment is properly shielded. Pacemaker patients are advised to keep their Personal Computer or Handheld Computer incorporating Wireless WAN away from the pacemaker, while it is on. Switch off Personal Computer or Handheld Computer incorporating Wireless WAN before boarding an aircraft. Make sure it cannot be switched on inadvertently. The operation of wireless appliances in an aircraft is forbidden to prevent interference with communications systems. Failure to observe these instructions may lead to the suspension or denial of cellular services to the offender, legal action, or both. Do not operate Personal Computer or Handheld Computer incorporating Wireless WAN in the presence of flammable gases or fumes. Switch off the cellular terminal when you are near petrol stations, fuel depots, chemical plants or where blasting operations are in progress. Operation of any electrical equipment in potentially explosive atmospheres can constitute a safety hazard. Your Personal Computer or Handheld Computer incorporating Wireless WAN receives and transmits radio frequency energy while switched on. Remember that interference can occur if it is used close to TV sets, radios, computers or inadequately shielded equipment. Follow any special regulations and always switch off Personal Computer or Handheld Computer incorporating Wireless WAN wherever forbidden, or when you suspect that it may cause interference or danger. Road safety comes first! Do not use a Personal Computer or Handheld Computer incorporating Wireless WAN while driving a vehicle. Do not place the computer with Wireless WAN in an area where it could cause personal injury to the driver or passengers. It is recommended to stow the unit in the boot or secure stowage area while driving. Do not place the computer with Wireless WAN in an area over an air bag or in the vicinity where an air bag may deploy. Air bags inflate with great force and if the computer with Wireless WAN is placed in the air bag deployment area may be propelled with great force and cause serious injury to occupants of the vehicle. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 4 IMPORTANT!

Personal Computer or Handheld Computer incorporating Wireless WAN operate using radio signals and cellular networks cannot be guaranteed to connect in all conditions. Therefore, you should never rely solely upon any wireless device for essential communications, for example emergency calls. Remember, in order to make or receive calls, Personal Computer or Handheld Computer incorporating Wireless WAN must be switched on and in a service area with adequate cellular signal strength. Some networks do not allow for emergency calls if certain network services or phone features are in use (e.g. lock functions, fixed dialing etc.). You may need to deactivate those features before you can make an emergency call. Some networks require that a valid SIM card be properly inserted in Personal Computer or Handheld Computer incorporating Wireless WAN. Models for Canada Industry Canada (IC) Notice for modem This equipment contains an Industry Canada approved modem unit. The Industry Canada label is affixed on the modem unit. EQUIPMENT ATTACHEMENT LIMITATIONS NOTICE: The Industry Canada label identifies certified equip-

ment. This certification means that the equipment meets tele-

communications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equip-

ment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the users satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local tele-

communications company. The equipment must also be installed using an acceptable method of connection. The cus-

tomer should be aware that compliance with the above condi-

tions may not prevent degradation of service in some situations. Repairs to certified equipment should be coordinated by a rep-

resentative designated by the supplier. Any repairs or alter-

ations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. Caution: Users should not attempt to make such con-

nections themselves, but should contact the appropriate elec-

tric inspection authority, or electrician, as appropriate. NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5. REN: See bottom of the computer RESTRICTIONS CONCERNANT LE RACCORDEMENT DE MATRIEL AVIS: Ltiquette dIndustrie Canada identifie le matriel homologu. Cette tiquette certifie que le matriel est con-

forme aux normes de protection, dexploitation et de scurit des rseaux de tlcommunications, comme le prescrivent les documents concernant les exigences techniques relatives au matriel terminal. Le Ministre nassure toutefois pas que le matriel fonctionnera la satisfaction de lutilisateur. Avant dinstaller ce matriel, lutilisateur doit sassurer quil est permis de le raccorder aux installations de lentreprise locale de tlcommunication. Le matriel doit galement tre install en suivant une mthode accepte de raccordement. Labonn ne doit pas oublier quil est possible que la confor-

mit aux conditions nonces ci-dessus nempche pas la dgradation du service dans certaines situations. Les rparations de matriel homologu doivent tre coordon-

nes par un reprsentant dsign par le fournisseur. Lentreprise de tlcommunications peut demander lutili-

sateur de dbrancher un appareil la suite de rparations ou de modifications effectues par lutilisateur ou cause de mauvais fonctionnement. Pour sa propre protection, lutilisateur doit sassurer que tous les fils de mise la terre de la source dnergie lectrique, des lignes tlphoniques et des canalisations deau mtalliques, sil y en a, sont raccords ensemble. Cette prcaution est par-

ticulirement importante dans les rgions rurales. Avertisse-

ment: Lutilisateur ne doit pas tenter de faire ces raccordements lui-mme; il doit avoir recours un service dinspection des installations lectriques, ou un lectricien, selon le cas. AVIS: Lindice dquivalence de la sonnerie (IES) assign chaque dispositif terminal indique le nombre maximal de ter-

minaux qui peuvent tre raccords une interface. La termi-

naison dune interface tlphonique peut consister en une combinaison de quelques dispositifs, la seule condition que la somme dindices dquivalence de la sonnerie de touts les dispositifs nexcde pas 5. IES: Voir sous le fond de lordinateur 17-Ca-1 d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 5 Read Me First Canadian ICES-003 This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. 7-M-2

Industry Canada This product complies with RSS210 Industry Canada. Operation is subject to the following two conditions;

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device. 30-Ca-1-1

This product (local network devices) for the band 5150-

5250 MHz is only indoor usage to reduce potential for harmful interference to co-channel Mobile Satellite sys-

tems. High power radars are allocated as primary users (mean-

ing they have priority) of 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LELAN devices. 30-Ca-2-1 Models for Europe

Declaration of Conformity (DoC) Hereby, we declare that this Personal Computer is in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/EC. Hint:

If you want to get a copy of the original DoC of our products which relates to the R&TTE, please con-

tact our web address: http://www.doc.panasonic.de Contact:

Panasonic Services Europe A Division of Panasonic Marketing Europe GmbH Panasonic Testing Centre Network connection. The terminal equipment is intended for connection to the following public network;

In all the countries of European Economical Area;

- Public Switched Telephony Networks Technical Features. The terminal equipment includes the following features;

- DTMF dialing

- Maximum bitrate receiving mode: 56 kbit/s

- Maximum bitrate sending mode: 33.6 kbit/s This product is designed to interwork with the Public Switched Telecommunication Networks in UK, Ireland, Nether-

lands, Sweden, Denmark, Finland, Switzerland, Luxembourg, Belgium, France, Germany, Spain, Portugal, Iceland, Greece, Italy, Norway, Austria, Poland, Hungary, Czech, Slovakia, Slovenia, Estonia, Latvia, Lithuania, Cyprus, Malta, Romania, Bulgaria and Liechtenstein. 18-E-1 d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 6 Important Safety Instructions / Importantes Mesures De Scurit When using your telephone equipment, basic safety pre-

cautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the fol-

lowing:

1. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. 2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 3. Do not use the telephone to report a gas leak in the vicinity of the leak. 4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. SAVE THESE INSTRUCTIONS Certaines mesures de scurit doivent tre prises pen-

dant lutilisation de matrial tlphonique afin de rduire les risques dincendie, de choc lectrique et de blessures. En voici quelquesunes:

1. Ne pas utiliser lappareil prs de leau, p.ex., prs dune baignoire, dun lavabo, dun vier de cuisine, dun bac laver, dans un sous-sol humide ou prs dune piscine. 2. viter dutiliser le tlphone (sauf sil sagit dun appareil sans fil) pendant un orage lectrique. Ceci peut prsenter un risque de choc lectrique caus par la foudre. 3. Ne pas utiliser lappareil tlphonique pour signaler une fuite de gaz sil est situ prs de la fuite. 4. Utiliser seulement le cordon dalimentation et le type de piles indiqus dans ce manual. Ne pas jeter les piles dans le feu: elles peuvent exploser. Se conformer aux rglements pertinents quant llimination des piles. CONSERVER CES INSTRUCTIONS 19-E-1 19-F-1 Information to the User

This product and your Health This product, like other radio devices, emits radio fre-

quency electromagnetic energy. The level of energy emit-

ted by this product however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones. Because this product operates within the guidelines found in radio frequency safety standards and recommenda-

tions, we believe this product is safe for use by consum-

ers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research lit-

erature. In some situations or environments, the use of this prod-

uct may be restricted by the proprietor of the building or responsible representatives of the organization. These sit-

uations may for example include:

Lithium Battery / Pile au lithium

Using this product on board of airplanes, or

In any other environment where the risk of interference to other devices or services is perceived or identified as harmful. If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment

(e.g. airports), you are encouraged to ask for authoriza-

tion to use this product prior to turning on the product. Regulatory Information We are not responsible for any radio or television interfer-

ence caused by unauthorized modification of this product. The correction of interference caused by such unautho-

rized modification will be the responsibility of the user. We and its authorized resellers or distributors are not liable for damage or violation of government regulations that may arise from failing to comply with these guidelines. 26-M-1 Lithium Battery!

This computer contains a lithium battery to enable the date, time, and other data to be stored. The battery should only be exchanged by authorized service personnel. Warning! A risk of explosion from incorrect installation or misapplication may possibly occur. 15-E-1 Pile au lithium!

Le micro-ordinateur renferme une pile au lithium qui per-

met de sauvegarder certaines donnes, notamment la date et lheure. La pile ne doit tre remplace que par un technicien qualifi. Danger ! Risque dexplosion en cas de non respect de cette mise en garde!

15-F-1 d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 7 Read Me First Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households) Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. 36-M-1 Precautions THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS PART OF, NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAF-

FIC CONTROL EQUIPMENT/SYSTEMS, OR AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS*1. PANASONIC WILL NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING FROM THE USE OF THIS PRODUCT ARISING OUT OF THE FOREGOING USES.

*1 AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2 Electrical Flight Bag (EFB) Systems and Class1 EFB Systems when used during critical phases of flight (e.g., during take-off and landing) and/or mounted on to the aircraft. Class1 EFB Systems and 2 EFB Systems are defined by FAA: AC (Advisory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leaflets) No.36. Panasonic cannot guarantee any specifications, tech-

nologies, reliability, safety (e.g. Flammability/Smoke/

Toxicity/Radio Frequency Emission, etc) requirements related to aviation standards that exceed the specifica-

tions of our COTS (Commercial-Off-The-Shelf) products. This computer is not intended for use in medical equip-

ment including life-support systems, air traffic control sys-

tems, or other equipment, devices or systems that are involved with ensuring human life or safety. Panasonic cannot be held responsible in any way for any damages or loss resulting from the use of this unit in these types of equipment, devices or systems, etc. If a Malfunction Occurs, Immediately Unplug the AC Plug and the Battery Pack This product is damaged Foreign object inside this product Smoke emitted Unusual smell emitted Unusually hot Continuing to use this product while any of the above con-

ditions are present may result in fire or electric shock. If a malfunction occurs, immediately turn the power off and unplug the AC plug, and then remove the battery pack. Then contact your technical support office. Do Not Touch This Product and Cable When It Starts Thundering Electric shock may result. Do Not Connect the AC Adaptor to a Power Source Other Than a Standard Household AC Outlet Otherwise, a fire due to overheating may result. Connect-

ing to a DC/AC converter (inverter) may damage the AC adaptor. On an airplane, only connect the AC adaptor/

charger to an AC outlet specifically approved for such use. Do Not Do Anything That May Damage the AC Cord, the AC Plug, or the AC Adaptor Do not damage or modify the cord, place it near hot tools, bend, twist, or pull it forcefully, place heavy objects on it, or bundle it tightly. Continuing to use a damaged cord may result in fire, short circuit, or electric shock. Do Not Pull or Insert the AC Plug If Your Hands Are Wet Electric shock may result. Clean Dust and Other Debris of the AC Plug Regularly If dust or other debris accumulates on the plug, humidity, etc. may cause a defect in the insulation, which may result in a fire. Pull the plug, and wipe it with a dry cloth. Pull the plug if the computer is not being used for a long period of time. Insert the AC Plug Completely If the plug is not inserted completely, fire due to overheat-

ing or electric shock may result. Do not use a damaged plug or loose AC outlet. Do Not Place Containers of Liquid or Metal Objects on Top of This Product If water or other liquid spills, or if paper clips, coins, or for-

eign matter get inside this product, fire or electric shock may result. If foreign matter has found its way inside, immediately turn the power off and unplug the AC plug, and remove the battery pack. Then contact your technical support office. Do Not Disassemble This Product There are high-voltage areas inside which may give you an electric shock if you should touch them. Do not touch the pins and circuit boards inside, and do not allow foreign matter to enter inside. Also, remodeling or disassembly may cause a fire. Keep SD Memory Cards Away from Infants and Small Children Accidental swallowing will result in bodily injury. In the event of accidental swallowing, see a doctor imme-

diately. Do Not Place This Product on Unstable Surfaces If balance is lost, this product may fall over or drop, result-

ing in an injury. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 8 Avoid Stacking If balance is lost, this product may fall over or drop, result-

ing in an injury. Do Not Keep This Product Wherever There is a Lot of Water, Moisture, Steam, Dust, Oily Vapors, etc. Otherwise, possibly resulting in fire or electric shock. Do Not Leave This Product in High Temperature Envi-

ronment Such as in a Sun-Heated Car, for a Long Period of Time Leaving this product where it will be exposed to extremely high temperatures such as in a sun-heated car or in direct sunlight may deform the cabinet and/or cause trouble in the internal parts. Continued use in such a resulting condi-

tion may lead to short-circuiting or insulation defects, etc. which may in turn lead to a fire or electric shocks. Hold the Plug When Unplugging the AC Plug Pulling on the cord may damage the cord, resulting in a fire or electric shock. Do Not Move This Product While the AC Plug Is Connected The AC cord may be damaged, resulting in fire or electric shock. If the AC cord is damaged, unplug the AC plug immediately. Use Only the Specified AC Adaptor with This Product Using an AC adaptor other than the one supplied

(attached to your product or supplied by Panasonic) may result in a fire. Do Not Subject the AC Adaptor to Any Strong Impact Using the AC adaptor after a strong impact such as being dropped may result in electric shock, short circuit, or fire. Take a Break of 10-15 Minutes Every Hour Using this product for long periods of time may have detri-

mental health effects on the eyes or hands. Do Not Turn the Volume Up to Loud When Using Headphones Listening at high volumes that overstimulate the ear for long periods of time may result in loss of hearing. Use the Modem with a Regular Telephone Line Connection to an internal phone line (on-premise switches) of a company or business office, etc. or to a dig-

ital public phone or use in a country or area not supported by the computer may result in a fire or electric shocks. Do Not Connect a Telephone Line, or a Network Cable Other Than the One Specified, into the LAN Port If the LAN port is connected to a network such as the ones listed below, a fire or electric shock may result. Networks other than 100BASE-TX or 10BASE-T Phone lines (Telephone lines, internal phone lines (on-

premise switches), digital public phones, etc.) Do Not Use with Exposing the Skin to This Product for a Long Period of Time Using this product with exposing the skin to the heat source of this product or AC adaptor for a long period of time can cause a low-temperature burn.

Do not place the computer near a television or radio receiver.

Keep the computer away from magnets. Data stored on the hard disk may be lost. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 9 Read Me First Precautions (Battery Pack) Do Not Use with Any Other Product The battery pack is rechargeable and was intended for the specified product. If it is used with a product other than the one for which it was designed, electrolyte leak-

age, generation of heat, ignition or rupture may result. Do Not Charge the Battery Using Methods Other Than Those Specified If the battery is not charged using one of the specified methods, electrolyte leakage, generation of heat, ignition or rupture may result. Do Not Throw the Battery Pack into a Fire or Expose It to Excessive Heat Generation of heat, ignition or rupture may result. Avoid Extreme Heat (Near the Fire, in Direct Sunlight, for Example) Electrolyte leakage, generation of heat, ignition or rupture may result. Do Not Insert Sharp Objects into the Battery Pack, Expose It to Bumps or Shocks, Disassemble, or Mod-

ify It Electrolyte leakage, generation of heat, ignition or rupture may result. Do Not Short the Positive (+) and Negative (-) Con-

tacts Generation of heat, ignition or rupture may result. Do not place the battery pack together with articles such as neck-

laces or hairpins when carrying or storing. Do Not Use This Product with a Battery Pack Other Than the One Specified Use only the specified battery pack (CF-VZSU37) with your product. Use of battery packs other than those man-

ufactured and supplied by Panasonic may present a safety hazard (generation of heat, ignition or rupture). A lithium ion battery that is recyclable powers the product you have pur-

chased. Please call 1-800-8-BATTERY for information on how to recycle this battery. Lappareil que vous vous tes procur est aliment par une batterie au lithium-ion. Pour des renseignements sur le recy-

clage de la batterie, veuillez com-

poser le 1-800-8-BATTERY. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 10

Do not touch the terminals on the battery pack. The battery pack may no longer function properly if the contacts are dirty or damaged.

Do not expose the battery pack to water, or allow it to become wet.

If the battery pack will not be used for a long period of time (a month or more), charge or discharge (use) the battery pack until the remaining battery level becomes 30% to 40% and store it in a cool, dry place.

This computer prevents overcharging of the battery by recharging only when the remaining power is less than approx. 95% (when Economy Mode (ECO) is enabled:

75%) of capacity.

The battery pack is not charged when the computer is first purchased. Be sure to charge it before using it for the first time. When the AC adaptor is connected to the computer, charging begins automatically.

Should the battery leak and the fluid get into your eyes, do not rub your eyes. Immediately flush your eyes with clear water and see a doctor for medical treatment as soon as possible. NOTE

The battery pack may become warm during recharging or normal use. This is completely nor-

mal.

Recharging will not commence if internal tempera-

ture of the battery pack is outside of the allowable temperature range (0 C to 55 C {32 F to 131 F}).

( Reference Manual Battery Power) Once the allowable range requirement is satisfied, charg-

ing begins automatically. Note that the recharging time varies based on the usage conditions.

(Recharging takes longer than usual when the tem-

perature is 10 C {50 F} or below.)

If the temperature is low, the operating time is shortened. Only use the computer within the allow-

able temperature range.

The battery pack is a consumable item. If the amount of time the computer can be run by using a particular battery pack becomes dramatically shorter and repeated recharging does not restore its performance, the battery pack should be replaced with a new one.

When transporting a spare battery inside a pack-

age, briefcase, etc., it is recommended that it be placed in a plastic bag so that its contacts are pro-

tected.

Always power off the computer when it is not in use. Leaving the computer on when the AC adap-

tor is not connected will exhaust the remaining bat-

tery capacity. Description of Parts A B C D E F G H I J K L M A :Function Key I : LCD/Touchscreen

Reference Manual Using the Touchscreen J : Security Lock K :Modem Port You can connect a Kensington cable. Refer to the instruc-

tion manual of the cable. The security lock and cable is a theft prevention device. Matsushita Electric Industrial Co., Ltd. will bear no responsibility in the event of theft. Be sure to use the included modem telephone cable, and insert the ferrite core side of modem telephone cable into the modem port on the computer. phone cable. Do not move/remove the ferrite core of modem tele-

90 mm {3.5 "} or less

Reference Manual Modem L : LAN Port If the Mini Port Replicator is connected to the computer, connect the LAN cable to the LAN port on the Mini Port Replicator. You cannot use the LAN port on the computer.

Reference Manual LAN M :USB Ports

Reference Manual USB Devices

Reference Manual Key Combinations B :Keyboard C :Touch Pad

Reference Manual Using the Touch Pad D :Bluetooth Antenna

Supplemencary Inscructions E : Wireless LAN Antenna

Reference Manual Wireless LAN F : Power Switch

page 14 Power Indicator Off: Power off/Hibernation Green: Power on Blinking green: Sleep G :Wireless Switch Switch the wireless devices to on (right side) or to off (left side).

Reference Manual Disabling/Enabling Wire-

less Communication Wireless LAN

Supplementary Instructions of Bluetooth H :LED Indicator

: SD/SDHC Memory Card status

: Caps lock

: Numeric key (NumLk)

: Scroll lock (ScrLk)

: Hard disk drive status ECO : Economy Mode (ECO) status

Reference Manual Battery Power

: Battery status

Reference Manual Battery Power d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 11 Description of Parts EXT. A B C D E F d e t r a t S g n i t t e G G H I J K L M G :Microphone Jack Use a condenser microphone. If you use other types of microphones, audio input may not be possible, or malfunctions may occur. H :Headphone Jack You can connect headphones or amplified speakers. When they are connected, audio from the internal speakers is not heard. I : Battery Latches

page 13 J : Battery Pack K :RAM Module Slot

page 23 L : Speaker M :Hand Strap

page 18 A :DC-IN Jack B :External Display Port If the Mini Port Replicator is connected to the com-

puter, connect the external display to the external dis-

play port on the Mini Port Replicator. You cannot use the external display port on the computer.

Reference Manual External Display C :Mini Port Replicator Connector Connect the Mini Port Replicator (optional).

Reference Manual Mini Port Replicator D :Ventilation Hold E : PC Card Slot

Reference Manual PC Cards F : SD Memory Card Slot

Reference Manual SD/SDHC Memory Card Wireless WAN Antenna For model with EVDO or with-

out wireless WAN:

The SIM card slot under this cover is not used for this model. Do not open the cover. For other models:

Refer to the additional instruc-

tions. n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 12 First-time Operation

Preparation A Check and identify the supplied accessories. If you do not find the described accessories, contact your technical support office. AC Adaptor . 1 AC Cord . 1 Battery Pack . 1 Modem Telephone Cable . 1 Model No: CF-AA1623A Soft Cloth . 1 Stylus . 1 Tether. 1 Model No: CF-VZSU51W

Reference Manual Using the Touchscreen Operating Instructions (This book) . 1 Product Recovery DVD-ROM. 1

You will need the serial number when you reinstall Bs Recorder or install Bs CLiP ( page 30). Windows Book . 1 B Read the LIMITED USE LICENSE AGREEMENT before breaking the seal on the computers packaging

( page 34). d e t r a t S g n i t t e G 1 2 1 Insert the battery pack. Slide the battery pack in parallel with the arrow direction and attach it so that the left and right projections on the new battery pack match the dents of the com-

puter. Be careful about the battery pack direction. In case that the projection does not match the dents of the computer, detach the battery pack once, then slide it while pushing it lightly to avoid floating.

Make sure the latches are securely locked. Otherwise the battery pack may fall CAUTION when you carry the computer.

Do not touch the terminals of the battery pack and the computer. Doing so can make the terminals dirty or damaged, and may cause malfunction of the battery pack and the computer. B 2 Open the display. Hold and lift the A part to open the display. Be careful not to press the SIM card slot cover (B) by mistake. CAUTION

Do not open the display wider than necessary (140 or more), and do not apply excessive pressure to the LCD. Do not open or close the computer holding the edge of the LCD segment. A n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 13 First-time Operation 3 Connect your computer to a power outlet. The battery charging starts automatically. CAUTION

Do not disconnect the AC adaptor and do not switch the wireless switch to on until the first-time operation procedure is completed.

When using the computer for the first time, do not connect any peripheral device except the battery pack and AC adaptor.

Handling the AC adaptor Problems such as sudden voltage drops may arise during periods of thunder and lightning. Since this could adversely affect your computer, an uninterrupt-

ible power source (UPS) is highly recommended unless running from the bat-

tery pack alone. 4 Turn on the computer. Slide and hold the power switch power indicator

When the power is turned on, the power indicator lights. But, in the following cases, the power indicator may turn off once immediately after the power is turned on. After removing the battery pack and the AC adaptor and setting them again After sliding the power switch for 4 seconds or longer and turning off the for approximately one second until the lights. power It takes approximately 5 minutes until the Windows setup screen appears. Do not touch the keys and touch pad until it appears. CAUTION

Do not slide the power switch repeatedly.

The computer will forcibly be turned off if you slide and hold the power switch for four seconds or longer. the computer again.

Once you turn off the computer, wait for ten seconds or more before you turn on

Do not perform the following operation until the hard disk drive indicator turns off. Connecting or disconnecting the AC adaptor Sliding the power switch Touching the keyboard, touch pad or touchscreen Closing the display

Do not change the Setup Utility until completing step 5. If you do so, Windows setup may not operate properly. 5 Setup Windows. Follow the on-screen instructions.

After turning on the computer, Please wait a moment while Windows pre-

pares to start for the first time ......... appears, and then a small circle circu-

lates on the screen. This will take a few minutes.

During setup of Windows, use the touch pad and clicking to move the cursor and to click an item.

Setup of Windows will take approximately 20 minutes. Go to the next step, confirming each message on the display. CAUTION

You cannot choose the following words for user name and password: CON, PRN, AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9.

You can change the user name, password, image and security setting after setup of Windows.

Remember your password. If you forget the password, you cannot use the Win-

dows. Creating a password reset disk beforehand is recommended. 3 4 d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 14 6 Perform the touchscreen calibration. A Click

(Start) - [Control Panel] - [Additional Options] - [Tablet Calibration]. B If [User Account Control] is displayed, click [Continue], or input password and click [OK]. C Touch each + using the stylus.

+ is displayed in order at 9 locations. NOTE

PC Information Viewer This computer periodically records the management information including the hard disk information such as number of hours powered-on, number of times powered-on, internal temperature, replacement sector. The maximum data volume for each record is 750 byte. These information are only used for estimating the cause when the hard disk goes down by any possibility. They are never sent to outside via network nor used for any other purpose except for the purpose described the above. To disable the function, add the check mark for [Disable the automatic save function for management information history] in [Hard Disk Status] of PC Information Viewer, and click [OK].

( Reference Manual Check the Computers Usage Status)

When Starting Up/Shutting Down CAUTION

Do not do the following Connecting or disconnecting the AC adaptor Sliding the power switch Touching the keyboard, touch pad, touchscreen or external mouse Closing the display NOTE

When the DC plug is not connected to the computer, disconnect the AC cord from your AC wall outlet. About 1.5 W of power is consumed simply by having the AC adaptor plugged into an electrical outlet.

Note that the computer consumes electricity even when the computer power is off. If the battery pack is fully charged, the battery will fully discharge in the following period of time:

When power is off: Approx. 3 months In sleep: Approx. 8 days In hibernation: Approx. 15 days If Wake up from LAN is disabled, the period of time in sleep will become slightly longer, and the period of time in hibernation will become about the same as that in power-off.

To change the partition structure You can shrink a part of an existing partition to create unallocated disk space, from which you can create a new parti-

tion. This computer has a single partition in the default setting. A Click

(Start) and right-click [Computer], then click [Manage].

A standard user needs to enter an administrator password. B Click [Disk Management]. C Right-click the partition for Windows (c drive in the default setting), and click [Shrink Volume].

The partition size depends on the computer specifications. D Input the size in [Enter the amount of space to shrink in MB] and click [Shrink].

You cannot input a larger number than the displayed size. E Right-click [Unallocated] (the shrunk space in the step D) and click [New Simple Volume]. F Follow the on-screen instructions to make the settings, and click [Finish]. Wait until formatting is completed. NOTE

You can create an additional partition using remaining unallocated space or newly creating unallocated space.

To delete a partition, right-click the partition and click [Delete Volume] in the step C. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 15 First-time Operation Regarding Windows Vista You can select the Classic view of Control Panel or the Classic Start menu. You can also change the way a user logs on or off. This manual explains using the Windows Vista default setting (not Classic view or Classic Start menu etc.).

User Account Control User Account Control is a new security component of Windows Vista to stop unauthorized changes to your computer. The User Account Control message will pop up every time you try making an important change to your computer.

Windows Sidebar The Windows Sidebar does not appear in the default setting. To display it, click sories] - [Windows Sidebar]. To always display the sidebar:

A Right-click the sidebar icon B Add a check mark for [Start Sidebar when Windows starts] and click [OK]. on the notification area, and click [Properties].

When Using Wireless LAN <Only for model with wireless LAN>

(Start) - [All Programs] - [Acces-

If you cannot communicate with the access point or if the access point is not detected, right-click tion area and click [Connect to a network], and then click in the [Connect to a network] screen. on the notifica-

Sound and Video Sound (e.g. MP3, WMA) and video (e.g. MPG, WMV) recorded in PC Cards and SD Memory Cards may be inter-

rupted during playback. If this happens, copy them to the hard disk drive and play back. Sound and video in AVI files may be interrupted or produce a time-lag during playback. If this happens, click or on the notification area, and click [High performance]. This may remedy the problem. Depending on the processing status on Windows, sound may be interrupted at Windows startup. You can mute the sound at startup. A Right-click the desktop and click [Personalize] - [Sounds]. B Remove the check mark from [Play Windows Startup sound], and click [OK]. If you create WMA files from an audio CD using Windows Media Player and add them to a Windows Media Players playlist and play them back, the sound may be cut approximately 20 seconds before the end of the track. If this occurs, make the following settings. A Click B Click [Speakers] - [Properties]. C In [Speakers Properties] screen, click [Effects]. D Add a check mark for [Disable System Effects] and click [OK].

(Start) - [Control Panel] - [Hardware and Sound] - [Sound]. The thermal control may set the computer to hibernation if you use the computer in a high ambient temperature and use an application that uses a lot of CPU power (for example, playing DVD-Video over an extended period). Wait a few minutes (at least 5) before turning the computer on again if this occurs. You can change settings to make it less likely that the thermal control will switch the computer to hibernation, even though this will slow down application processing speed, and may result in less smooth video. Go to the Setup Utility [Main] menu and change the setting for [Thermal Control] to [Extended].

About Windows Anytime Upgrade supplied Windows Anytime Upgrade is necessary for upgrading Windows Vista Business to Windows Vista Ultimate. To upgrade the operating system to Windows Vista Ultimate using the Windows Anytime Upgrade disc, you need to purchase the license key on the web site of Microsoft Windows Anytime Upgrade. For further informa-

tion, refer to the instruction manual of Windows Anytime Upgrade. This disc cannot be used to reinstall Windows. When you have upgraded the preinstalled Windows Vista Business to Windows Vista Ultimate using Win-

dows Anytime Upgrade, you may have the problem that audio does not sound. To remedy it, reinstall the sound driver in the following procedure. A Click B Click [SigmaTel Audio] and click [Uninstall].

(Start) - [Control Panel] - [Uninstall a program].

A standard user needs to enter an administrator password.

Follow the on-screen instructions to remove the sound driver. C Click D Right-click [setup] in [sound] folder and click [Run as administrator].

(Start) and input [c:\util\drivers\sound] in [Start Search], and press Enter. If there are two or more setup files, right-click the file whose [Type] is [Application].

A standard user needs to enter an administrator password.

Follow the on-screen instructions and install the sound driver. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 16

If high-frequency sound occurs around keyboard while using the computer This symptom is mitigated by changing the settings for the USB power saving function. A standard user needs to enter an administrator password and click [OK]. Set [USB selective suspend setting] to [Enable].

(Start) - [Control Panel] - [System and Maintenance] - [Power Options]. A Click B Click [Change plan settings] of the current power plan. C In [Change settings for the plan:], click [Change advanced power settings]. D In [Advanced settings], double-click [USB settings]. E Double-click the displayed [USB selective suspend setting]. F Change settings of [On battery:] and [Plugged in:] to [Enabled]. G Click [OK] and exit the [Advanced settings] screen. Set the USB power saving function to [Disable].

(Start) - [All Programs] - [Panasonic] - [USB Power Save Mode Switching Utility]. A Click B Click [Disable], and click [OK]. C Click [OK]. D Restart the computer.

Windows Update You can update to the latest patches and service packs for Windows with the following menus.

(Start) - [All Programs] - [Windows Update]

Do not apply Driver Updates even if a message to update a driver appears. If a driver update is required, contact your technical support office.

If the message Check your computer security is displayed Select

(red icon) on the notification area and make the appropriate settings. The Windows Security Center reg-

ularly gives you notice so that you can make the optimum settings. This is not an error message and you can use the computer. However, making appropriate measures is recommended to reduce the risk of virus and other attacks. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 17 First-time Operation Using the Hand Strap The hand strap is convenient for computing while standing. To carry the computer, put your hand between the computer and the hand strap to prevent it from falling, and firmly hold the computer when using it. Before Using the Stylus At the time of purchase, the stylus (included) is not attached to the stylus holder (A). The tether prevents the stylus from falling accidentally. It can be attached to the stylus holder. A d e t r a t S g n i t t e G Perform the following steps before using the stylus. 1 Attach the tether to the stylus. A B Tether Stylus 2 Thread the stylus strap of the tether from (B) in the direction of the arrow. 3 Pass the stylus through the strap. n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 18 4 Fasten the strap to the hook (C). 5 To store the stylus, push the end into (D). CAUTION

Do not carry the computer by gripping the stylus holder. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 19 On-screen Manual You can access the Reference Manual and the Important Tips on the computer screen after completing the First-time Operation. When you access the Reference Manual and the Important Tips for the first time, the License Agreement of the Adobe Reader may be displayed. Read it carefully and select [Accept] to proceed.

Reference Manual The Reference Manual contains the practical information to help you fully enjoy the computers performance. To access the Reference Manual:

on the desktop. Double-click Contents

Read Me First

Using the Touch Pad

Using the Touchscreen

Display Rotation

Key Combinations

Battery Power

Customizing the Power Setting

Computing on the Road

Sleep or Hibernation Functions

Security Measures

Important Tips

PC Cards

SD Memory Card

Mini Port Replicator

External Display

USB Devices

Modem

LAN

Disabling/Enabling Wireless Com-

munication

Wireless LAN

Setup Utility

Loupe Utility

DMI Viewer

Troubleshooting (Advanced)

Check the Computers Usage Sta-

Protecting Your Computer from

Update Windows to its Latest Ver-

tus Viruses sion

Technical Information The Important Tips will provide you with the helpful information about the battery. Read to use the battery pack in the optimum condition to obtain longer operation time. To access the Important Tips:

Double-click on the desktop.

Alternatively click

(Start) - [All Programs] - [Panasonic] - [On-Line Manuals] - [Important Tips].

Supplementary Instructions of Bluetooth To access the Supplementary Instructions of Bluetooth:

Click

(Start) - [All Programs] - [Panasonic] - [On-Line Manuals] - [Bluetooth Manual]. NOTE

When Adobe Reader update notice is displayed, we recommend you follow the on-screen procedure and update. See http://www.adobe.com/ for the latest version of Adobe Reader. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 20 Handling and Maintenance Operation Environment

Place the computer on a flat stable surface. Do not place the computer upright. If the computer is exposed to an extremely strong impact, it may become inoperable.

Temperature: Operation: 5 C to 35 C {41 F to 95 F}

Storage: -20C to 60 C {-4 F to 140 F}

Operation: 30% to 80% RH (No condensation) Storage: 30% to 90% RH (No condensation) Humidity:

Even within the above temperature/humidity ranges, using for a long time in an extreme environment will result in the product deterioration and will shorten the product life.

Do not place the computer in the following areas, otherwise the computer may be damaged. Near electronic equipment. Image distortion or noise may occur. Near magnets or in magnetic fields. In extremely high or low temperature.

As the computer can become hot during operation, keep it away from items that are sensitive to heat. Handling Cautions This computer is designed to minimize shock to parts such as the hard disk drive, but no warranty is provided against any trouble caused by shock. Be extremely careful when handling the computer.

When carrying the computer:

Turn off the computer. Remove all external devices, cables, cards and other protruding things. Do not drop or hit the computer against solid objects. Do not leave the display open. Do not grip the display part.

When you board an airplane, take the computer with you and never put it in your checked luggage. When using the computer on airplane, follow the airlines instructions.

When carrying a spare battery, put it in a plastic bag to protect its terminals.

This computer contains a magnet and magnetic products at the locations circled in the illustration at right. Avoid leaving metallic object or magnetic media in contact with these areas.

The touch pad is designed to be used with a finger tip. Do not place any object on its sur-

face and do not press down strongly with sharp-pointed or hard objects that may leave marks (e.g., nails, pencils and ball point pens).

Avoid any harmful substances such as oil from getting into the touch pad. The cursor may not work correctly.

If the computer is being carried in a soft bag with the battery pack removed, avoid undue pressure on the body of the computer in a crowded place, etc., as this may result in damage to the LCD.

Things to keep in mind when using the touchscreen

Do not apply too much pressure when operating the touchscreen. Only a light touch is required to operate the touchscreen. Applying too much pressure may damage the surface.

Do not touch the screen outside of the LCD display area. The touchscreen input area is defined by the LCD display screen. Touching the screen outside of the display area may result malfunctions or damage to the touchscreen.

When using peripheral devices Follow these instructions and the Reference Manual to avoid any damage to the devices. Carefully read the instruction manuals of the peripheral devices.

Use the peripheral devices conforming to the computers specifications.

Connect to the connectors in the correct direction.

If it is hard to insert, do not try forcibly but check the connectors shape, direction, alignment of pins, etc.

If screws are included, fasten them securely.

Preventing your computer from unauthorized use via wireless LAN/Bluetooth/wireless WAN

Before using wireless LAN/Bluetooth/wireless WAN, make the appropriate security settings such as data encryption. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 21 Handling and Maintenance

Computrace Software Computrace software tracks your stolen computer. Perform the following steps before installing Computrace software.

Computrace software is not included or installed in this computer. CAUTION

You will be unable to set [Computrace (R) BIOS Module] to [Disable] once you have set to [Enable]. Do not change the setting when not used. Even if you have set [Computrace (R) BIOS Module] to [Enable], this setting may return to [Disable] after repairs to the motherboard, etc. have been made. NOTE

Consult Absolute Software Corp. before disposal.

Refer to the following URL for Computrace software for installation and available service regions. Note that this service is only available in certain regions. http://www.absolute.com 1 2 3 4 5 6 Turn on or restart the computer, and press F2 while [Panasonic] boot screen is dis-

played. The Setup Utility starts up.

If the password is requested, enter the Supervisor Password. Select the [Security] menu, then select [Computrace (R) Sub-Menu] and press Enter. Select [Computrace (R) BIOS Module], and set to [Enable]. At the confirmation message, select [Execute] and press Enter. At the reconfirmation message, select [Execute] and press Enter. Press F10. At the confirmation message, select [Yes] and press Enter. The computer restarts. Maintenance To clean display (LCD) Use the soft cloth included with the computer (For more information, refer to Suggestions About Cleaning the LCD Sur-

face that comes with the soft cloth.) Cleaning the display while the power is on may cause the computer to malfunction. Also, dirt on the touchscreen is eas-

ier to see when the computer is powered off, and so is easier to clean. To clean the touch pad Wipe lightly with a gauze or other dry, soft cloth. To clean areas other than the LCD panel and touch pad Wet a soft cloth with water or a diluted kitchen cleanser (neutral), wring the cloth out thoroughly, and wipe the dirty area gently. Using a detergent other than a neutral kitchen cleanser (e.g., a weak alkali cleanser) may adversely affect painted surfaces. CAUTION

Do not use benzene, thinner, or rubbing alcohol since it may adversely affect the surface causing discoloration, etc. Do not use commercially-available household cleaners and cosmetics, as they may contain components harmful to the surface.

Do not apply water or detergent directly to the computer, since liquid may enter inside of the computer and cause malfunction or damage. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 22 Expanding Memory Use RAM modules that comply with the specifications below. Using any other module may cause malfunction or result in computer failure. RAM module specifications:

DDR2 SDRAM, 172 pins, Micro DIMM, 1.8 V, PC2-4200 CAUTION

Use recommended RAM module products. Do not use non-recommended RAM modules. Non-recommended RAM modules may not operate properly, and may cause damage to your computer. Some non-recommended RAM mod-

ules may overheat, causing the cover to warp. Refer to various sources for recommended RAM module.

RAM modules are extremely sensitive to static electricity. There are cases where static electricity generated by the human body has adversely affected such RAM modules. When inserting or removing a RAM module, do not touch the terminals or internal components, insert objects other than the module, or allow foreign particles to enter. Doing so has been known to cause damage, fire or electric shock.

Matsushita Electric Industrial Co., Ltd. will bear no responsibility whatsoever for failures or damage caused by the use of non-recommended RAM modules, or by incorrect installation or removal of such RAM modules. Before installing a RAM module, confirm the product type and the correct installation method. Preparation A Turn off your computer. Do not use the sleep or hibernation. B Disconnect the AC adaptor and remove the battery pack. C Remove the screw (A) and the cover on the bottom of the computer. Use the appropriate screw driver so as not to strip the thread of screw. A Inserting the RAM Module 1 Place the RAM module lightly in parallel with the RAM module slot so that the notch (B) of the RAM module and the protrusion (C) of the RAM module slot is in the same direc-

tion.

The gold terminals are visible at this point.

RAM module is at an angle of 20 - 30 with the horizontal line. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 23 Expanding Memory 2 3 Insert the RAM module parallel to the slot firmly until the gold terminals are invisible.

If it is hard to insert the RAM module, do not try forcibly but check the modules direction. Press the RAM module down until the right and left hooks (D) lock into place.

When pressing down the module, the right and left hooks will open slightly and

If it is hard to press down the RAM module, do not try forcibly but check the will return after locking. modules direction. 4 Set the cover and battery pack back. NOTE

If the RAM module is recognized correctly, the total size of this computers memory and RAM module memory is dis-

played on the [Information] menu of the Setup Utility. If the RAM module is not recognized, turn off the computer and insert it again. Removing the RAM Module 1 Carefully open the left and right hooks (E). The RAM module will be raised. 2 Carefully remove the RAM module from the slot. 3 Set the cover and battery pack back. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 24 Hard Disk Backup/Restore Function

[Backup and Restore Center] and [System Recovery Options] allow you create a backup of the entire hard disk data, which can be used to recover from hardware failure. Matsushita Electric Industrial Co., Ltd. will bear no responsibility for any damage suffered (including loss of data) as a result of the use of this function. Creating a backup of the hard disk data To create a backup of the entire hard disk to another storage media (e.g., external hard disk): Use [Back up computer]. To create a backup of a file or a folder: Use [Back up files]. For further information, click

(Start) - [Control Panel] - [Back up your computer]. NOTE

Connect the AC adaptor and do not remove it until backup is complete. Restoring the hard disk data NOTE

This function does not work when you turn on the computer for the first time or just after you reinstall Windows. Start and shut down Windows Vista, and then you can use the function.

Connect the AC adaptor and do not remove it until restoration is complete. 1 2 3 4 5 6 Turn on the computer, and when [Panasonic] boot screen disappears, press and hold F8.

If [Enter Password] is displayed during the following procedure, input the Supervisor Password or the User Password. Release your finger when [Advanced Boot Options] is displayed. Press to select [Repair Your Computer] and press Enter.

[System Recovery Options] appears. Select the keyboard layout and click [Next]. Select [User name] and input [Password], then click [OK]. Click [Windows Complete PC Restore] and follow the on-screen instructions. NOTE

If pressing F8 does not display [System Recovery Options], use the Product Recovery DVD-ROM. A Perform the steps 1 to 6 of Reinstalling Software ( page 27). B Click [Run System Recovery Options.] and click [Next]. C Follow the on-screen instructions. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 25 Hard Disk Data Erase Utility When disposing the computer or transferring the ownership, erase all hard disk data in order to avoid data leakage. Even if you erase the data or initialize the hard disk using normal Windows commands, the data can be read with some special software. Use the hard disk data erase utility to erase the data completely. Note that transferring of the ownership without uninstalling the commercial software will be a violation of the softwares license agreement. The hard disk data erase utility erases data using an overwriting method, but there is a possibility that due to malfunc-

tions or other operational errors, data may not be completely erased. There are also specialized devices that may be able to read data that has been erased using this method. If you need to erase highly confidential data, we recom-

mend that you contact a company that specializes in this process. Matsushita Electric Industrial Co., Ltd. will bear no responsibility for losses or damages suffered as a result of the use of this utility.

This utility cannot erase data for specific partitions. The entire hard disk data including the data of the recovery parti-

NOTE tion will be erased. Preparation

Prepare the Product Recovery DVD-ROM (included).

Prepare the Panasonic CD/DVD drive (optional): CF-VDRRT1M, CF-VDRRT2W, CF-VDRRT3W.

Remove all peripherals (except for the CD/DVD drive).

Connect the AC adaptor and do not remove it until hard disk data erase is complete. Turn off the computer and connect the CD/DVD drive to the computer. Turn on the computer, and press F2 while [Panasonic] boot screen is displayed. The Setup Utility starts up.

If the password is requested, enter the Supervisor Password. Press F9. At the confirmation message, select [Yes] and press Enter. Select the [Boot] menu, then select [USB CDD] and press F6 until [USB CDD] is at the top of [Boot priority order]. Set the Product Recovery DVD-ROM into the CD/DVD drive. Press F10. At the confirmation message, select [Yes] and press Enter. The computer will restart.

If [Enter Password] is displayed during the following procedures, input the Supervisor Password or the User Click [Erase the whole data on the Hard Disk for security] and click [Next]. At the confirmation message, click [YES]. Click [Continue]. Password. 7 8 9 10 Click [Continue] again. 11 Click [YES]. Erasing the hard disk data starts. 12 After erasing is completed, remove the Product Recovery DVD-ROM and click [OK]. 1 2 3 4 5 6 d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 26 Reinstalling Software Reinstalling software will return the computer to the default condition. When you reinstall the software, the hard disk data will be erased. Back up important data to other media or an external hard disk before reinstallation. CAUTION Do not delete the recovery partition on the hard disk. This partition contains data to help recover your system. The disk space in the partition is not available to store data. Hard disk Recovery partition

(approximately 2 GB) Area usable by Windows 1 2 4 5 6 7 8 9 Preparation

Prepare the Product Recovery DVD-ROM (included).

Prepare the Panasonic CD/DVD drive (optional): CF-VDRRT1M, CF-VDRRT2W, CF-VDRRT3W.

Remove all peripherals (except for the CD/DVD drive).

Connect the AC adaptor and do not remove it until reinstallation is complete. Turn off the computer and connect the CD/DVD drive to the computer. Turn on the computer, and press F2 while [Panasonic] boot screen is displayed. The Setup Utility starts up.

If the password is requested, enter the Supervisor Password. 3 Write down all of the contents of the Setup Utility and press F9. At the confirmation message, select [Yes] and press Enter. Select the [Boot] menu, then select [USB CDD] and press F6 until [USB CDD] is at the top of [Boot priority order]. Set the Product Recovery DVD-ROM into the CD/DVD drive. Press F10. At the confirmation message, select [Yes] and press Enter. The computer will restart. Click [Reinstall Windows] and click [Next]. The License Agreement screen appears. Click [Yes, I agree to the provisions above and wish to continue!] and click [Next]. Select the settings and click [Next].

[Reinstall Windows to the whole Hard Disk to factory default.] : You will have a single partition.

[Reinstall Windows to the operating system partition.] : You can keep the partition structure. 10 At the confirmation message, click [YES]. Reinstallation starts automatically. (It will take approximately 30 minutes.)

Do not interrupt reinstallation, for example by turning off the computer or pressing Ctrl + Alt + Del. Other-

wise reinstallation may become unavailable as Windows may not start up or the data may be corrupted. 11 Remove the Product Recovery DVD-ROM, and then click [OK] to turn off the computer, 12 then remove the CD/DVD drive. Turn on the computer, and press F2 while [Panasonic] boot screen is displayed. The Setup Utility starts up.

If the password is requested, enter the Supervisor Password. 13 Press F9. At the confirmation message, select [Yes] and then press Enter. The Setup Utility settings excluding the password(s) will return to the default values. 14 Press F10. At the confirmation message, select [Yes] and press Enter. The Setup Utility will close, and the computer will restart. 15 Perform the first-time operation ( page 14). 16 Start the Setup Utility and change the settings as necessary. 17 Perform Windows Update. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 27 Troubleshooting (Basic)/Error Code/Message Troubleshooting (Basic) Follow the instructions below when a problem has occurred. There is also an advanced troubleshooting guide in the Reference Manual. For a software problem, refer to the softwares instruction manual. If the problem persists, contact your technical support office. You can also check the computers status in the PC Information Viewer ( Reference Manual Check the Computers Usage Status).

Starting Up and Sleep and Hibernation Mode The computer does not power on/

The power indicator or bat-

tery indicator is not lit.

Connect the AC adaptor.

Insert a fully charged battery.

Remove the battery pack and the AC adaptor, then connect them again.

If an additional RAM module has been inserted, remove the RAM module and check to see if the RAM module is the recommended one. ( page 23)

When the CPU temperature is high, the computer may not start up to prevent overheating of the CPU. Wait until the computer cools down, and then turn the power on again. If the com-

puter does not power on even after cooling down, contact your technical support office. Windows does not start up. When Windows does not start when resuming from hibernation, set the Product Recov-

ery DVD-ROM and display [System Recovery Options] ( page 25), and run [Startup Repair]. If the problem persists, perform reinstallation with the Product Recovery DVD-

ROM.

Remove all peripheral devices. If a device is connected to the USB port, disconnect the device or set [Legacy USB Support] to [Disable] in the [Advanced] menu of the Setup Utility.

If an additional RAM module has been inserted, remove the RAM module and check to see if the RAM module is the recommended one. ( page 23)

If the power indicator is lit, slide the power switch for four seconds or longer to turn off, then turn on again.

Using the following procedure, start up in Safe Mode, and check the error details. A Turn on the computer, and when the [Panasonic] boot screen disappears (after enter-

ing the password*1 if one is set) hold down F8. B Release your finger when [Advanced Boot Options] is displayed, and with or , select [Safe Mode], then press Enter. Follow the on-screen instructions.

*1 Supervisor Password or User Password set with the Setup Utility

Press F9 in the Setup Utility ( page 31 To start the Setup Utility) to return the Setup Utility settings (excluding the passwords) to the default values. Start the Setup Utility and make the settings again.

If Extended RAM Module Failed appears, the RAM module is not correctly inserted. Turn off the computer, check that the RAM module is a recommended module, then insert it correctly.

If Standard RAM Failed appears, contact your technical support office.

Make sure that the bootable CD/DVD is set properly.

Start the Setup Utility, and confirm the following settings.

[USB Port] and [Legacy USB Support] are set to [Enable] in the [Advanced] menu.

[USB CDD] is the first device shown in [Boot priority order] in the [Boot] menu.

Supervisor Password or User Password: Contact your technical support office.

Administrator password:

If you have another account with Administrator authority, log-on with it, then delete the password for the problem account. If you have a password reset disk, click [Reset password] displayed after the password input error, then follow the on-screen instructions to set a new password. If you cannot do either of the above, you will need to reinstall ( page 27) and setup Windows.

A floppy disk is in the floppy disk drive and it does not contain system startup informa-

tion. Remove the floppy disk and press any key.

This message may appear with some devices connected to the USB port. Remove the device or set [Legacy USB Support] to [Disable] in the [Advanced] menu of the Setup Utility.

If the problem persists after removing the disk, it may be a hard disk failure. Perform the rein-

stallation and return the hard disk to its condition at the time of purchase. ( page 27) If the problem persists even after the reinstallation, contact your technical support office. There is a beep sound, and either Extended RAM Mod-

ule Failed or Standard RAM Failed appears. Cannot boot from optional CD/DVD drive. You have forgotten the password. Remove disks or other media. Press any key to restart or a similar mes-

sage appears.

[Executing Battery Recali-

bration] screen appears.

The Battery Recalibration was canceled before Windows was shut down last time. To start up Windows, turn off the computer by the power switch, and then turn on. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 28

Starting Up and Sleep and Hibernation Mode The computer will not auto-

matically enter sleep/hiber-

nation.

If you connect to a network using wireless LAN function, perform access point settings.

( Reference Manual Wireless LAN)

If you do not use wireless LAN function, turn off wireless LAN function. ( Refer-

ence Manual Wireless LAN)

Make sure that you are not using any software that regularly accesses the hard disk.

Perform the following steps to change the audio settings to prevent audio output. A Right-click the desktop and click [Personalize] - [Sounds]. B Remove the check mark from [Play Windows Startup sound], and click [OK].

One of the following operations may have been carried out. In sleep mode, the AC adaptor or battery pack was disconnected, or a peripheral was connected or disconnected. The power switch was slid for four seconds or longer to forcibly turn off the computer. Slide the power switch to turn on the computer. Data not saved will be lost.

Check to see if there was a disk error. A Remove all peripheral devices including an external display. B Click C Click [Tools] - [Check Now].

(Start) - [Computer] and right-click [Local Disk (C:)], and click [Properties]. A standard user needs to enter an administrator password. D Select the option in [Check disk options] and click [Start].

Start the computer in Safe Mode and check the error details. ( page 28 Windows does not start up)

Remove all peripheral devices.

Wait one or two minutes. It is not a malfunction.

If

If lights up, press NumLk to disable the ten-key mode, and then input. lights up, press Caps Lock to disable the Caps Lock mode, and then input.

The external display is selected. Press Fn + F3 to switch the display. Wait until the dis-

play has been switched completely before pressing Fn + F3 again.

When using an external display, Check the cable connection. Turn on the display. Check the settings of external display. selection keys, but press any other key like Ctrl.

The display is turned off by the power-saving function. To resume, do not press the direct slide the power switch.

The computer entered sleep or hibernation by the power-saving function. To resume,

The screen may become darker. Press Fn + F2 to make the screen brighter.

Changing the number of display colors and resolution may affect the screen. Restart the

Connecting/disconnecting an external display may affect the screen. Restart the com-

computer. puter.

If the external display does not support the power saving function, it may not work nor-

mally when the computer enters the power saving mode. Turn off the external display.

Log off and log on Windows, and display the sidebar again.

The battery level is very low (the charge is approx. 9% or less).

Connect the AC adaptor. You can use the computer when the indicator light is orange. If you do not have an AC adaptor, save your data and power off your computer. After replacing the battery pack with a fully charged one, turn your computer on again. When logging on (e.g., resuming the computer), audio is distorted. Cannot resume. Other startup problems.

Shutting Down Windows does not shut down.

Password Even after entering the password, a message appears requesting to type it again.

Display No display. The screen is disordered. The external display does not work normally. The sidebar gadgets are not correctly displayed.

Battery The battery indicator is lights red. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 29 Troubleshooting (Basic)/Error Code/Message

Battery The battery indicator is blinking.

If blinking red:

If blinking orange:

Quickly save your data and power off your computer. Remove the battery pack and dis-

connect the AC adaptor, then connect them again. If the problem persists, contact your technical support office. The battery pack or charging circuit may be defective. Battery cannot be recharged temporarily because the internal temperature of the bat-

tery pack is outside the acceptable temperature range for recharging. Your computer can be used normally in this state. Once the range requirement is satisfied, charging begins automatically. Software applications and peripheral devices (USB devices, etc.) are consuming too much power. Exit the software applications currently running. Once the range require-

ment is satisfied, charging begins automatically. The battery indicator is flashing.

The battery is recharging. If [Battery Charging Indicator] in [Main] menu of the Setup Utility is set to [Flashing], the indicator will alternately become lighter and darker.

Touch Pad / Touchscreen The cursor does not work.

When using the external mouse, connect it correctly.

Restart the computer by using the keyboard. Cannot input using the touch pad. Cannot input using the touchscreen. Cannot point the correct posi-

tion using the included stylus.

Reference Manual The Reference Manual is not displayed.

Others

[System Restore] does not appear by pressing F8. No response. Press and press three times, and press to select [Restart] and press Enter.

If the computer does not respond to keyboard commands, read No response ( below).

Set [Touch Pad] to [Enable] in the [Main] menu of the Setup Utility.

The drivers for some mice may disable the touch pad. Check your mouses operating instructions.

When mouse drivers are installed (i.e. IntelliMouse), the touchscreen does not work. Reinstall the touchscreen driver.

Perform the touchscreen calibration ( page 15).

Install Adobe Reader. then press Enter. A Log on to Windows as an administrator. B Click

(Start) and input c:\util\reader\AdbeRdr70_enu_full.exe in [Start Search]

C Update Adobe Reader to its latest version. If your computer is connected to the internet, start up Adobe Reader and click [Help] -

[Check for updates now].

The restoration program does not run after Windows Anytime Upgrade is executed. For further information, access the following web site:

https://eww.pavc.panasonic.co.jp/pc/itn/support/vistainfo.html

Press Ctrl+Shift+Esc to open Task Manager and close the software application that

An input screen (e.g., password input screen at startup) may be hidden behind another is not responding. window. Press Alt+Tab to check.

Slide the switch for four seconds or longer to shut down the computer, and then slide the power switch to turn it on. If the application program does not work normally, uninstall and

(Start) - [Control Panel] - [Uninstall a program]. reinstall the program. To uninstall, click The PC information viewer startup is slow.

It may take a minute or longer to start up depending on the network environment. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 30 Error Code/Message Follow the instructions below when an error code or message appears. If the problem persists or if the error code/mes-

sage displayed is not shown here, contact your technical support office. Error Code/Message 0211 Keyboard error 0251 System CMOS checksum bad -

Default configuration used 0271 Check date and time settings 0280 Previous boot incomplete - Default configuration used Press <F2> to Setup Operating System not found Solution

Disconnect external keyboard. An error has occurred in the memory of Setup Utility settings. This occurs when the memory con-

tent is changed by an unexpected program operation, etc.

Start the Setup Utility and return the settings to the default values, and then change the set-

If the problem persists, the internal clock battery may need to be replaced. Contact your tech-

tings as necessary. nical support office. The date and time settings are not correct.

Start the Setup Utility and set the correct date and time.

If the problem persists, the internal clock battery may need to be replaced. Contact your tech-

nical support office. Startup has failed repeatedly, so the Setup Utility settings have been returned to the default val-

ues to startup the computer.

Start the Setup Utility and return the settings to the default values, and then change the set-

tings as necessary. d e t r a t S g n i t t e G

Write down the error details and press F2 to start the Setup Utility. Change the settings if necessary. The operating system is not installed in the floppy disk or the hard disk that you are going to boot from.

If using a floppy disk, change the disk to the one you can use for boot.

If using the hard disk, check if the hard disk is recognized in [Information] menu of the Setup Utility. If the hard disk is recognized, perform the reinstallation ( page 27). If not, contact your technical support office.

If a device is connected to the USB port, disconnect the device, or set [Legacy USB Support]

to [Disable] in the [Advanced] menu of the Setup Utility.

To start the Setup Utility A Restart the computer. B Press F2 while [Panasonic] boot screen is displayed. n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 31 Hardware Diagnostics If the hardware installed in this computer is not operating properly, you can use the PC-Diagnostic Utility to determine whether or not there is a problem. If the utility discovers a problem in the hardware, contact your technical support office. Hardware that can be checked using the PC-Diagnostic Utility Hardware below can be checked using this utility. (Software cannot be checked.)

CPU

Memory

Hard Disk

Video Controller

Sound*1

Modem

LAN

Wireless LAN*2

Bluetooth*3

Wireless WAN*4

USB

PC Card Controller

SD Card Controller

Keyboard

Touch Pad

Touchscreen

*1 When the PC-Diagnostic Utility is running, a loud beep will sound, so do not use headphones at this time. (The beep will not sound if mute is using Windows.)

*2 Only for model with wireless LAN

*3 Only for model with Bluetooth

*4 Only for model with wireless WAN

When the video diagnostic check is running, the display may be distorted, and when the audio diagnostic check is running, sounds may be generated from the speaker. These are not malfunctions. Regarding the PC-Diagnostic Utility NOTE

For the hard disk only, you can select standard diagnostic check or extended diagnostic check. When the PC-Diagnostic Utility starts up, it will run the standard diagnostic check.

We recommend that you use the touch pad for operations. When not using the touch pad, you can operate using the internal keyboard instead. Operations Select icon Touch pad operations Place the cursor above the icon Click the icon Complete the PC- Diagnos-

tic Utility and then restart the computer Tap or click (right click cannot be used) Click

(close) Internal keyboard operations Press Space and then press

(close) cannot be selected) Press Space above the icon Press Ctrl + Alt + Del.

If the touch pad does not operate properly, press Ctrl + Alt + Del to restart the computer, or slide the power switch to turn the power off, and then restart the PC-Diagnostic Utility. Running the Diagnostic Check Run this utility using the default settings in the Setup Utility. If the Setup Utility or other settings will not allow a hardware to be executed, the hardware icon will be displayed in gray. 1 Connect the AC adaptor, and turn on the wireless switch. During the diagnostic check, do not remove the AC adaptor, or attach any peripheral devices. Turn on or restart the computer, and press F2 while [Panasonic] boot screen is displayed. The Setup Utility starts up.

If the password is requested, enter the Supervisor Password.

If you are using the computer after changing the settings from the status at the time of purchase, we recom-

mend that you make a note of the settings that are changed. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 2 32 3 4 5 Press F9. At the confirmation message, select [Yes] and press Enter. Press F10. At the confirmation message, select [Yes] and press Enter. The computer will restart. Press Ctrl + F7 while [Panasonic] boot screen is displayed. When the PC-Diagnostic Utility starts up, it will automatically begin the diagnostic check for all hardware components.

If the password is requested, enter the password.

The touch pad and the internal keyboard cannot be used until alternating blue and yellow colors are displayed on the left side of the hardware icon (A).

By clicking the icon, you can execute the following operations:

: Start the diagnostic check from the beginning

: Stop the diagnostic check (You cannot restart the check partway through by clicking

: Display help (click the screen or press Space to return to the original diagnostic check screen)

You can check the status of the diagnostic check by the display color on the left side of the hardware icon (A). Aqua: Not running diagnostic check Alternating blue and yellow: Currently running diagnostic check. The interval of the alternating colors differs depending on the type of diagnostic check currently running. During memory diagnostic check, the display may freeze for a long period of time. Wait until the process is complete. A Green: No problems discovered Red: Problems discovered NOTE

Using the following procedure, you can run a diagnostic check on a specified hardware component, or run an extended diagnostic check on the hard disk (The extended diagnostic check is only for the hard disk). The extended diagnostic check is more detailed, and so requires a longer period of time to run. A Click B Click the icon for the hardware that is not to be checked, so that the icon is displayed in gray (B). When running a check on the hard disk, clicking the icon once will turn on the extended diagnostic check (FULL (C) will be displayed below the icon); click again, and the icon will be displayed in gray. C Click to start the diagnostic check. to stop the diagnostic check. C 6 When all the hardware has been checked, confirm the diagnostic check results. If the display is red and the message Check Result TEST FAILED is displayed, you can assume that there is a problem with the computers hardware. Confirm which hardware component is displayed as red, and contact your technical support office. If the display is green and the message Check Result TEST PASSED is displayed, the computers hardware is operating normally. Continue using the computer as it is. If the computer still does not operate properly, reinstall the software. ( page 27) NOTE

If you run a memory diagnostic check after installing a new RAM module (sold separately) and the message Check Result TEST FAILED is displayed:

Remove the additional RAM module and run the diagnostic check again. If the message Check Result TEST FAILED is still displayed, you can assume that there is a problem with the internal RAM module. 7 After the diagnostic check is complete, click restart the computer.

(close), or press Ctrl + Alt + Del to d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 33 LIMITED USE LICENSE AGREEMENT THE SOFTWARE PROGRAM(S) (PROGRAMS) FURNISHED WITH THIS PANASONIC PRODUCT (PRODUCT) ARE LICENSED ONLY TO THE END-USER (YOU), AND MAY BE USED BY YOU ONLY IN ACCORDANCE WITH THE LICENSE TERMS DESCRIBED BELOW. YOUR USE OF THE PROGRAMS SHALL BE CONCLUSIVELY DEEMED TO CONSTITUTE YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE. Matsushita Electric Industrial Co., Ltd. (MEI) has developed or otherwise obtained the Programs and hereby licenses their use to you. You assume sole responsibility for the selection of the Product (including the associated Programs) to achieve your intended results, and for the installation, use and results obtained therefrom. LICENSE A. MEI hereby grants you a personal, non-transferable and non-exclusive right and license to use the Programs in accordance with the terms and conditions stated in this Agreement. You acknowledge that you are receiving only a LIMITED LICENSE TO USE the Programs and related documentation and that you shall obtain no title, ownership nor any other rights in or to the Programs and related documentation nor in or to the algorithms, concepts, designs and ideas represented by or incorporated in the Programs and related documentation, all of which title, ownership and rights shall remain with MEI or its suppliers. B. You may use the Programs only on the single Product which was accompanied by the Programs. C. You and your employees and agents are required to protect the confidentiality of the Programs. You may not distrib-

ute or otherwise make the Programs or related documentation available to any third party, by time-sharing or other-

wise, without the prior written consent of MEI. D. You may not copy or reproduce, or permit to be copied or reproduced, the Programs or related documentation for any purpose, except that you may make one (1) copy of the Programs for backup purposes only in support of your use of the Programs on the single Product which was accompanied by the Programs. You shall not modify, or attempt to modify, the Programs. E. You may transfer the Programs and license them to another party only in connection with your transfer of the single Product which was accompanied by the Programs to such other party. At the time of such a transfer, you must also transfer all copies, whether in printed or machine readable form, of every Program, and the related documentation, to the same party or destroy any such copies not so transferred. F. You may not remove any copyright, trademark or other notice or product identification from the Programs and you must reproduce and include any such notice or product identification on any copy of any Program. YOU MAY NOT REVERSE ASSEMBLE, REVERSE COMPILE, OR MECHANICALLY OR ELECTRONICALLY TRACE THE PROGRAMS, OR ANY COPY THEREOF, IN WHOLE OR IN PART. YOU MAY NOT USE, COPY, MODIFY, ALTER, OR TRANSFER THE PROGRAMS OR ANY COPY THEREOF, IN WHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED IN THE LICENSE. IF YOU TRANSFER POSSESSION OF ANY COPY OF ANY PROGRAM TO ANOTHER PARTY, EXCEPT AS PER-

MITTED IN PARAGRAPH E ABOVE, YOUR LICENSE IS AUTOMATICALLY TERMINATED. TERM This license is effective only for so long as you own or lease the Product, unless earlier terminated. You may terminate this license at any time by destroying, at your expense, the Programs and related documentation together with all cop-

ies thereof in any form. This license will also terminate effective immediately upon occurrence of the conditions thereof set forth elsewhere in this Agreement, or if you fail to comply with any term or condition contained herein. Upon any such termination, you agree to destroy, at your expense, the Programs and related documentation together with all cop-

ies thereof in any form. YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. YOU FURTHER AGREE THAT IT IS THE COMPLETE AND EXCLUSIVE STATE-

MENT OF THE AGREEMENT BETWEEN US, WHICH SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT, ORAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN US, RELATING TO THE SUBJECT MAT-

TER OF THIS AGREEMENT. About Intel software products The enclosed software products and documentation were developed at private expense, and are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the government is subject to restrictions as set forth in FAR 52.227-14 and DFARS 252.227-7013 et. seq. or its successor. The use of this product by the government constitutes acknowledgment of Intels proprietary rights in the product. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 34 Contrat de licence dusage limit Le(s) logiciel(s) (les Logiciels) fournis avec ce produit Panasonic (le Produit) sont exclusivement concds en licence lutilisateur ultime (vous), et ils ne peuvent tre utiliss que conformment aux clauses contractuelles cidessous. En utilisant les logiciels, vous vous engagez de manire dfinitive respecter les termes, clauses et conditions des prsentes. Matsushita Electric Industrial Co., Ltd. (MEI) a mis au point ou obtenu les Logiciels et vous en concde lutilisation par les prsentes. Vous assumez lentire responsabilit du choix de ce Produit (y compris des Logiciels associs) pour obtenir les rsultats escompts, ainsi que de linstallation, de lutilisation et des rsultats obtenus. Licence A. MEI vous octroie par les prsentes le droit et la licence personnels, non cessibles et non exclusifs dutiliser les Logiciels conformment aux termes, clauses et conditions de ce contrat. Vous reconnaissez ne recevoir quun droit limit dutiliser les Logiciels et la documentation les accompagnant et vous vous engagez nobtenir aucun droit de titre, proprit ni aucun autre droit vis--vis des Logiciels et de la documentation les accompagnant ni vis--vis des algorithmes, concepts, dessins, configurations et ides reprsents par ou incorpors dans les Logiciels et la documentation les accompagnant, dont les titres, proprit et droits resteront tous MEI ou leurs propritaires. B. Vous ne pouvez utiliser les Logiciels que sur le Produit unique qui est accompagn par les Logiciels. C. Vous et vos employs ou agents tes requis de protger la confidentialit des Logiciels. Vous ne pouvez ni distribuer ni mettre les Logiciels et la documentation les accompagnant la disposition dun tiers, par partage de temps ou de quelque autre manire que ce soit, sans lautorisation crite pralable de MEI. D. Vous ne pouvez ni copier ni reproduire ni permettre la copie ni la reproduction des Logiciels ni de la documentation les accompagnant pour quelque fin que ce soit, lexception dune (1) copie des Logiciels des fins de sauvegarde uniquement pour soutenir votre utilisation des Logiciels sur le Produit unique qui est accompagn par les Logiciels. Vous ne pouvez ni modifier ni tenter de modifier les Logiciels. E. Vous ne pouvez cder les Logiciels et en octroyer la licence une autre partie quen rapport avec votre cession du Produit unique qui est accompagn par les Logiciels cette autre partie. Au moment de cette cession, vous devez cder galement toutes les copies, que ce soit sous forme imprime ou lisible par la machine, de tous les Logiciels ainsi que de la documentation les accompagnant, la mme partie ou dtruire les copies non cdes. F. Vous ne pouvez retirer aucune marque de droits dauteur, marque de commerce ou autre ni aucune identification de produit des Logiciels et vous devez reproduire et inclure toutes ces notices ou identifications de produit sur toutes les copies des Logiciels. Vous ne pouvez assembler en sens inverse, compiler en sens inverse ni retracer les Logiciels ni aucune de leurs copies, de faon lectronique ou mcanique, en tout ou en partie. Vous ne pouvez utiliser, copier, modifier, altrer ni cder les Logiciels ni aucune de leurs copies, en tout ou en partie, lexception de ce qui est expressment stipul dans ce contrat. Si vous cdez la possession de toute copie ou de tout Logiciel une autre partie, lexception de ce qui est autoris au paragraphe E ci-dessus, votre licence est automatiquement rsilie. Termes, clauses et conditions Cette licence nest effective que pour la dure de possession ou de crdit-bail du Produit, moins dune rsiliation antrieure. Vous pouvez rsilier cette licence tout moment en dtruisant, vos frais, les Logiciels et la documentation les accompagnant avec toutes leurs copies, sous quelque forme que ce soit. Cette licence sera galement rsilie, avec application immdiate, si les conditions de rsiliation dfinies ailleurs dans ce contrat se sont ralises ou si vous ne respectez pas les termes, clauses et conditions qui y sont contenues. Au moment de la rsiliation, vous acceptez de dtruire, vos frais, les Logiciels et la documentation les accompagnant avec toutes leurs copies, sous quelque forme que ce soit. Vous reconnaissez avoir lu ce contrat, en avoir compris toute la substance et avoir accept de respecter ses termes, clauses et conditions. Vous reconnaissez en outre quils sont la description complte et exclusive du contrat conclu entre nous, contrat qui remplace et annule toute proposition ou contrat prcdent, crit ou oral, et toute autre communication entre nous, relativement lobjet du prsent contrat. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 35 Specifications To check CPU speed, memory size and the hard disk drive (HDD) size:

Start the Setup Utility (

[CPU Speed]: CPU speed, [System Memory]: Memory size, [Primary Master]: Hard disk drive size Reference Manual Setup Utility) and select [Information] menu.

Main Specifications Model No. CPU/

Secondary cache memory Chip Set Main Memory*2 Video Memory Hard Disk Drive Display Method Internal LCD External Display*6 Simultaneous Display on LCD + Exter-

nal Display*6 Wireless LAN Bluetooth*8 LAN*9 Modem Sound Security Chip Card Slots PC Card Slot SD Memory Card Slot*11 1 CF-T7BWATZJM Intel Core 2 Duo Processor Ultra Low Voltage U7500 (1.06 GHz, 2 MB*1 L2 cache, 533 MHz FSB) Mobile Intel GM 965 Express chip set 1 GB*1, DDR2 SDRAM (2 GB*1 Max.) UMA (251 MB*1 Max.)*3 80 GB*4 Approx. 2 GB*4 are used as a recovery partition. (Users cannot use this partition.) 12.1 XGA type (TFT) (1024 768 dots) 65,536/16,777,216 colors (1024 768 dots)*5 65,536/16,777,216 colors (800 600 dots/1024 768 dots/1280 768 dots/1280 1024 dots/1400 1050 dots/1440 900 dots/1600 1200 dots) 65,536/16,777,216 colors (800 600 dots, 1024 768 dots)*5 Intel Wireless WiFi Link 4965 AGN *7 ( page 37)

page 37 IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000 Base-T Data: 56 kbps (V.92) FAX: 14.4 kbps WAVE and MIDI playback, Intel High Definition Audio subsystem support, Monaural Speaker (built in) TPM (TCG V1.2 compliant)*10 1, Type I or Type II, Allowable current 3.3 V: 400 mA, 5 V: 400 mA d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U RAM Module Slot Interface Keyboard/Pointing Device Power Supply AC Adaptor*15 Battery Pack Operating Time*16 Charging Time*17 Power Consumption*18 Physical Dimensions (W H D)

(excluding the stylus holder) 1, DDR2 SDRAM, 200-pin, 1.8 V, SO-DIMM, PC2-4200 Compliant*12 USB Ports 3 (USB2.0 3)*13 / Modem Port (RJ-11) / LAN Port (RJ-45) *9 /

External Display Port: Mini Dsub 15-pin female / Microphone Jack*14: Miniature jack, 3.5 DIA / Headphone Jack: Miniature jack, 3.5 DIA / Mini Port Replicator connector:

Dedicated 50-pin male 83 keys/Touch Pad/Touchscreen (stylus (included) touch capable) AC adaptor or Battery pack Input: 100 V - 240 V AC, 50 Hz/60 Hz Output: 16 V DC, 3.75 A Li-ion 11.1 V, 5.8 Ah When using battery pack (CF-VZSU51W) Approx. 7 hours (Economy Mode (ECO) - Disable) When using battery pack (CF-VZSU52W) Approx. ?? hours (Economy Mode (ECO) - Disable) When using battery pack (CF-VZSU51W) When using battery pack (CF-VZSU52W) Approx. 5 hours (Power off)/Approx. 6.5 hours (Power on) Approx. 4 hours (Power off)/Approx. 5 hours (Power on)0 Approx. 35 W*19 / Approx. 60 W (maximum when recharging in the ON state) Including protrusion of the hand strap Excluding protrusion of the hand strap 268 mm 33.3 mm (at the front)/71.1 mm (at the rear) 218 mm

{10.6 " 1.3 " /2.8 " 8.6 "}

268 mm 33.3 mm (at the front)/50.2 mm (at the rear) 218 mm

{10.6 " 1.3 " /2.0 " 8.6 "}

Weight*20 Approx. 1465 g {3.3 lb.}

g n i t o o h s e b u o r T l x i d n e p p A 36 Environment Operation Temperature Storage Humidity Temperature Humidity OS*21 Pre-installed Software*21 5C to 35C {41F to 95F}

30% to 80% RH (No condensation)

-20C to 60C {-4F to 140F}

30% to 90% RH (No condensation) Windows Vista Business Doungrade on Windows XP is available Microsoft Internet Explorer 7.0 / DirectX 10 /Microsoft Windows Media Player 11 /

Microsoft Windows Movie Maker 6.0 / Microsoft .NET Framework 3.0 / Adobe Reader /

Loupe Utility / Touch Pad Utility / DMI Viewer / PC Information Viewer / PC Information Popup / Display Rotation Tool / Hotkey Settings / Power Saving Utility / Fan Control Utility /

LAN Power Saving Utility / Intel Matrix Storage Manager / Wireless Switch Utility / Wireless Connection Disable Utility*22 / Bluetooth Stack for Windows by TOSHIBA / Economy Mode

(ECO) Setting Utility / Battery Recalibration Utility / Infineon TPM Professional Package V3.0*22 Setup Utility / Hard Disk Data Erase Utility*23 / PC-Diagnostic Utility*24

Wireless LAN <Only for model with wireless LAN>

Data Transfer Rates Standard Supported Transmission Method Wireless Channels Used RF Frequency Band IEEE802.11a: 54/48/36/24/18/12/9/6 Mbps (automatically switched)*25 IEEE802.11b: 11/5.5/2/1 Mbps (automatically switched)*25 IEEE802.11g: 54/48/36/24/18/12/9/6 Mbps (automatically switched)*25 IEEE802.11a/IEEE802.11b/IEEE802.11g OFDM system, DS-SS system IEEE802.11a: Channels 36/40/44/48/52/56/60/64/149/153/157/161/165 IEEE802.11b/ IEEE802.11g: Channels 1 to 11 IEEE802.11a: 5.18 - 5.32 GHz, 5.745 - 5.825 GHz IEEE802.11b/ IEEE802.11g: 2412 - 2462 MHz

Bluetooth <Only for model with Bluetooth>

Bluetooth Version Transmission Method Wireless Channels Used RF Frequency Band 2.0 + EDR FHSS system Channels 1 to 79 2.402-2.48 GHz

*1 1 MB = 1,048,576 bytes / 1 GB = 1,073,741,824 bytes

*2 You can physically expand the memory up to 4 GB, but the total amount of usable memory available will be less depend-

ing on the actual system configuration.

*3 A segment of the main memory is allotted automatically depending on the computers operating status. The size of the Video Memory cannot be set by the user.

*4 1 GB = 1,000,000,000 bytes. Your operating system or some application software will report as fewer GB.

*5 A 16,777,216 color display is achieved by using the dithering function.

*6 Display may be impossible using some connected external displays.

*7 Only for model with wireless LAN. It does not correspond to IEEE802.11n.

*8 Only for model with Bluetooth.

*9 Some devices cannot be used depending on the port type.

*10 For information on TPM, click

(Start) and input c:\util\drivers\tpm\README.pdf in [Start Search], and press Enter, and refer to the Installation Manual of Trusted Platform Module (TPM).

*11 This slot is compatible with High-Speed Mode. Operation has been tested and confirmed using Panasonic SD/SDHC Memory Cards with a capacity of up to 8 GB. Operation on other SD equipment is not guaranteed.

*12 Only a RAM module designed for DDR2 (PC2-4200) can be added (Panasonic : CF-BAK0512U, CF-BAK1024U). 172 pin Micro DIMM used in CF-T5/CF-W5 series cannot be used.

*13 Does not guarantee operation of all USB-compatible periph-

erals.

*14 Use a condenser-stereo microphone.

*15 <Only for North America>

The AC adaptor is compatible with power sources up to 240 V AC adaptor. This computer is supplied with a 125 V AC compatible AC cord. 20-M-2-1

*16 Measured using MobileMark 2007 (LCD brightness : 60 cd/m2). Varies depending on the usage conditions, or when an optional device is attached. When Economy Mode (ECO) is enabled, the operating time becomes approximately 20 % shorter than when it is disabled.

*17 Varies depending on the usage conditions, CPU speed, etc. It may take a long time to charge a fully discharged battery.

*18 Approx. 0.7 W when the battery pack is fully charged (or not being charged) and the computer is off.

*19 Rated power consumption. 23-E-1

*20 Average value. May differ depending on models.

*21 Operations of this computer are not guaranteed except for the pre-installed OS.

*22 Must be installed before use.

*23 The Product Recovery DVD-ROM is required.

*24 For startup methods, refer to Hardware Diagnostics

( page 32).

*25 These are speeds specified in IEEE802.11a+b+g standards. Actual speeds may differ. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 37 LIMITED WARRANTY For U.S.A. PANASONIC PERSONAL COMPUTER AND PERIPHERALS LIMITED WARRANTY Panasonic Computer Solutions Company (referred to as Panasonic) will repair this product (other than software, which is covered by a separate warranty) with new or rebuilt parts, free of charge in the U.S.A. for three (3) years from the date of original purchase in the event of a defect in materials or workmanship. This warranty includes the AC adaptor but excludes the batteries and all other options and accessories which are covered for a period of one (1) year from the date of purchase. This warranty is extended solely to the original purchaser. A purchase receipt or other proof of date of original purchase will be required before warranty performance is rendered. This warranty only covers failures due to defects in materials or workmanship which occur during normal use. It does not cover dam-

age which occurs in shipment or failures which are caused by products not supplied by Panasonic, or failures which result from alter-

ation, accident, misuse, introduction of liquid or other foreign matter into the unit, abuse, neglect, installation, maladjustment of consumer controls, improper maintenance, modification or service by anyone other than a Factory Service Center or authorized Panasonic Service Dealer, or damage that is attributable to acts of God. THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS PART OF, NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAFFIC CON-

TROL EQUIPMENT/SYSTEMS, OR AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS*1. PANASONIC WILL NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING FROM THE USE OF THIS PRODUCT ARISING OUT OF THE FOREGOING USES.

*1 AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2 Electrical Flight Bag (EFB) Systems and Class1 EFB Systems when used during critical phases of flight (e.g., during take-off and landing) and/or mounted on to the aircraft. Class1 EFB Systems and 2 EFB Systems are defined by FAA: AC (Advisory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leaflets) No.36. Limits and Exclusions:

There are no other express warranties except as listed below. PANASONIC SHALL NOT BE LIABLE FOR LOSS OF DATA OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow the exclu-

sion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. If a problem with your product develops during or after the warranty period, you may contact our representatives at 1-800-LAPTOP5. If the prob-

lem is not handled to your satisfaction, then write to the Consumer Affairs Division at the address indicated below. SOFTWARE LIMITED WARRANTY Panasonic Computer Solutions Company (referred to as Panasonic) warrants to you only that the disk(s) or other media on which the Programs are furnished will be free from defects in materials and workmanship under normal use for a period of sixty (60) days from the date of delivery thereof to you, as evidenced by your purchase receipt. This is the only warranty Panasonic makes to you. Panasonic does not warrant that the functions contained in the Programs will meet your requirements or that the operation of the Programs will be uninterrupted or error free. Panasonics entire liability, and your exclusive remedy under this warranty shall be limited to the replacement, in the United States, of any defective disk or other media which is returned to Panasonics Authorized Service Center, together with a copy of the purchase receipt, within the aforesaid warranty period. Anything in the foregoing to the contrary notwithstanding, Panasonic shall have no obligation for any defects in the disk(s) or other media on which the Programs are furnished resulting from your storage thereof, or for defects that have been caused by operation of the disk(s) or other media otherwise than on the Product or in environmental conditions other than those specified by Panasonic by alteration, accident, misuse, abuse, neglect, mishandling, misapplication, installation, maladjustment of consumer controls, improper maintenance, modification of damage that is attributable to acts of God. In addition, Panasonic shall have no obligation for any defects in the disk(s) or other media if you have modified, or attempted to modify any Program. DURATION OF IMPLIED WARRANTIES, IF ANY, IS LIMITED TO SIXTY (60) DAYS. PANASONIC ASSUMES NO RISK OF AND SHALL NOT IN ANY CASE BE LIABLE FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES ARISING FROM BREACH OF WAR-

RANTY OR CONTRACT, NEGLIGENCE OR ANY OTHER LEGAL THEORY, INCLUDING, WITHOUT LIMITATION LOSS OF GOODWILL, PROFITS OR REVENUE, LOSS OF USE OF THE PROGRAMS OR PRODUCTS OR ANY ASSOCIATED EQUIP-

MENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT, FACILITIES, SERVICES, DOWNTIME COSTS, OR CLAIMS OF ANY PARTY DEALING WITH YOU FOR SUCH DAMAGES. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This Limited Warranty will be governed by the laws the State of New York, without regard to its conflict-of-laws rules. To obtain service or technical assistance within the continental U.S.A. and Alaska.

DIAL TOLL FREE: 1-800-LAPTOP5 Correspondence requesting product information should be sent to:

Panasonic Computer Solutions Company 3 Panasonic Way, Panazip 2F-5, Secaucus, NJ 07094 d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 38 For Canada PANASONIC COMPUTER AND PERIPHERALS LIMITED WARRANTY Type of Failure Coverage Defective Materials or Workman-

ship Defective Materials or Workman-

ship Period of Coverage Three (3) Years from Date of Origi-

nal End User Customer Purchase One (1) Year from Date of Original End User Customer Purchase Coverage Panasonic Canada Inc. (PCI) warrants to you, the first end user customer, this computer product (excluding software media), when purchased from PCI or from a PCI authorized reseller, to be free from defects in materials and workmanship under nor-

mal use, subject to the terms set forth below, during the period of warranty coverage specified. Scope of Coverage Whole Product (except Batteries), AC adaptor and CD-

ROM (if factory installed) Batteries, CD-ROM (unless factory installed), Port Rep-

licator, Extra Memory Modules and all other Peripherals, Options and Accessories Remedy In the event of a warranty claim, contact PCIs representatives within the applicable warranty period, identifying the nature of the defect claimed, at 1-800-668-8386 between 9:00 A.M. and 5:00 P.M., Eastern Time Zone, Mon. Fri. (excluding holidays) for instructions on how to obtain service. A purchase receipt or other proof of date of original purchase is required before warranty ser-

vice is performed. Defective parts covered by this Limited Warranty will be repaired or replaced with new or comparable rebuilt parts on an exchange basis. Warranty replacement or repair is subject to the terms of this Limited Warranty for the balance of the original period of warranty coverage. No Coverage This Limited Warranty does not cover products purchased outside Canada. Neither does it cover damage to, failure of, or defects in a product or accessory through mishandling, improper installation, abnormal use, misuse, neglect, accident, intro-

duction of liquid or other foreign matter into the product, alteration or servicing by anyone not authorized by PCI, or act of God. THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS PART OF, NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAFFIC CON-

TROL EQUIPMENT/SYSTEMS, OR AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS*1. PANASONIC WILL NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING FROM THE USE OF THIS PRODUCT ARISING OUT OF THE FOREGOING USES.

*1 AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2 Electrical Flight Bag (EFB) Systems and Class1 EFB Systems when used during critical phases of flight (e.g., during take-off and landing) and/or mounted on to the aircraft. Class1 EFB Systems and 2 EFB Systems are defined by FAA: AC (Advisory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leaflets) No.36. Carefully pack the product, preferably in the original carton. Include details of defect claimed and proof of date of original purchase. No liability is assumed for loss or damage to the product while in transit, if you chose your own transportation carrier. IF YOU SHIP THE PRODUCT FOR WARRANTY SERVICE SOFTWARE MEDIA LIMITED WARRANTY Coverage Panasonic Canada Inc. (PCI) warrants to you, the first end user customer, that the disk(s) or other media on which software program(s) is/are supplied will be free from defects in materials and workmanship under normal use in Canada for a period of sixty (60) days from date of receipt as evidenced by your purchase receipt for your Panasonic Computer product. THIS IS THE ONLY WARRANTY THAT PCI MAKES RESPECTING THE SOFTWARE MEDIA. PCI does not warrant the software. Please refer to the software licensors written warranty (accompanying the copy of the software) for any software warranty claim. Claim Procedure In the event of a defect in material or workmanship in the media during the sixty (60) day warranty period, and you return it, transportation costs prepaid, to Panasonic Canada Inc., Computer Products Marketing, at the above address, within the warranty period, together with a copy of your purchase receipt, and an explanation of the suspected defect, PCI will replace in Can-

ada the defective disk(s) or other media. Remedy PCIs entire liability, and your only remedy for any breach of this software media warranty is limited to replacement of the media only. It does not cover any other damages, including, but not limited to, loss of use or profit loss, or special, indirect or conse-

quential damages, or other claims, whether or not of similar character. No Coverage This limited warranty does not apply if the disk(s) or other media has been used in other than a Panasonic product, or in environmental conditions other than those specified by PCI or the manufacturer, or if subjected to misuse, neglect, mishandling, modification or attempted modification of the program, or if damaged by accident or act of God. PCI is not responsible for damage to or loss of any program, data or removable storage media. GENERAL NO OTHER WARRANTIES PCI DISCLAIMS ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE, SOFTWARE MEDIA, COMPUTER PRODUCT, OPTIONS AND ACCESSORIES. NO LIABILITY FOR CONSEQUENTIAL DAMAGES IN NO EVENT SHALL PCI BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING FROM ANY BREACH OF THE LIMITED WARRANTIES SET OUT IN THIS DOCUMENT, OR FROM THE USE OF THE COMPUTER PRODUCT, INCLUDING, WITHOUT LIMITATION, LOSS OF DATA, BUSINESS, PROFIT OR GOODWILL. IN ANY EVENT, PCIS MAXIMUM LIABILITY FOR ANY BREACH SHALL NOT EXCEED THE AMOUNT ACTUALLY PAID BY YOU FOR THE COMPUTER PRODUCT. NO ACTION, REGARDLESS OF ITS BASIS, MAY BE BEGUN AGAINST PCI MORE THAN TWO (2) YEARS AFTER THE CAUSE OF ACTION AROSE. Statutory Warranties Some jurisdictions do not allow these limitations or exclusions, so they may not apply to you. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 39 LIMITED WARRANTY d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 40 d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 41 LIMITED WARRANTY d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 42 As an ENERGY STAR Partner, Matsushita Electric Industrial Co., Ltd. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Outline of the International ENERGY STAR Office Equipment Program The international ENERGY STAR Office Equipment Program is an international program that promotes energy saving through the use of computers and other office equipment. The program backs the development and dissem-

ination of products with functions that effectively reduce energy consumption. It is an open system in which busi-

ness proprietors can participate voluntarily. The targeted products are office equipment such as computers, displays, printers, facsimiles, and copiers. Their standards and logos are uniform among participating nations. 22-E-1 Panasonic Computer Solutions Company 3 Panasonic Way, Panazip 2F-5, Secaucus, NJ 07094 Panasonic Canada Inc. 5770 Ambler Drive Mississauga, Ontario L4W 2T3 2007 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. Printed in Japan HS0307-0 DFQW5064ZA

exhibit
download
text

1 2 3 4

Final User Manual for

Users Manual

pdf

1.63 MiB

May 11 2007

OPERATING INSTRUCTIONS Personal Computer Model No. CF-W7 series Contents Getting Started Introduction.................................................2 Read Me First..............................................3 Description of Parts .....................................11 First-time Operation .....................................13 d e t r a t S g n i t t e G Useful Information On-screen Manual.......................................16 Handling and Maintenance.............................17 Expanding Memory......................................20 Hard Disk Backup Function (Recover Pro)...........22 Hard Disk Data Erase Utility ...........................24 Reinstalling Software....................................25 Troubleshooting Troubleshooting (Basic)/Error Code/Message.......27 Hardware Diagnostics...................................31 Appendix LIMITED USE LICENSE AGREEMENT..............33 Specifications ............................................35 LIMITED WARRANTY ..................................38 For further information about the com-

puter, you can refer to the on-screen manual. To access the on-screen manual

page 16 On-screen Manual For your technical support office, refer to LIMITED WARRANTY. Please read these instructions carefully before using this product and save this manual for future use. n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A Introduction Thank you for purchasing this Panasonic computer. For optimum performance and safety, please read these instruc-

tions carefully.

Terms and illustrations in these instructions

Conditions that may result in minor or moderate injury. Useful and helpful information. Press [Enter] key. Press and hold [Fn] key, and then press [F5] key. CAUTION

NOTE Enter :

Fn + F5 :

[start] - [Run] : Click [start], and then click [Run].

Page in these Operating Instructions.

Reference to the on-screen manuals.

Some illustrations are simplified to help your understanding and may look different from the actual unit.

If you do not log on as an administrator, you cannot use some functions or cannot display some screens.

Refer for the latest information about optional products to the catalogs, etc.

In these instructions, the names and terms are referred as follows. Microsoft Windows XP Professional Service Pack 2 with Advanced Security Technologies as Windows or Windows XP WinDVD 5 (OEM Version) as WinDVD Bs Recorder GOLD9 BASIC as Bs Recorder Bs CLiP 7 as Bs CLiP

The display modes are referred as follows. ( ) indicates the terms in [Intel Graphics Media Accelerator Driver for mobile] screen. To display the screen, click [start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) GMA Driver for Mobile]. Internal LCD (Notebook): The computers display External display (Monitor): External display Simultaneous display (Intel(R) Dual Display Clone): The same screen is displayed on the internal LCD and the external display. Extended desktop: The extended working area across the internal LCD and the external display.

Copyright This manual is copyrighted by Matsushita Electric Industrial Co., Ltd. with all rights reserved. No part of this manual may be reproduced in any form without the prior written permission of Matsushita Electric Industrial Co., Ltd. No patent liability is assumed with respect to the use of the information contained herein. 2007 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.

Disclaimer Computer specifications and manuals are subject to change without notice. Matsushita Electric Industrial Co., Ltd. assumes no liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the com-

puter and the manuals.

Trademarks Microsoft, Windows and the Windows logo are registered trademarks of Microsoft Corporation of the United States and/or other countries. Intel, Core, Centrino and PROSet are either registered trademarks or trademarks of Intel Corporation. SDHC Logo is a trademark. Adobe, the Adobe logo and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorpo-

rated in the United States and/or other countries. Bluetooth is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Matsushita Electric Industrial Co., Ltd. InterVideo, WinDVD, the InterVideo logo, Ulead and the Corel logo are trademarks or registered trademarks of Corel Corporation and/or its subsidiaries in Canada, the United States and/or other countries. Computrace is a registered trademark of Absolute Software Corp. Panasonic is a registered trademark of Matsushita Electric Industrial Co., Ltd. Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective own companies. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A 2 mark on the bottom of the computer>

Read Me First receiver. Models for U.S.A.

<Only for model with a Federal Communications Commission Radio Fre-

quency Interference Statement Note: This equipment has been tested and found to com-

ply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-

ence in a residential installation. This equipment gener-

ates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recep-

tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and

Connect the equipment into an outlet on a circuit differ-

ent from that to which the receiver is connected.

Consult the Panasonic Service Center or an experi-

enced radio/TV technician for help. Warning To assure continued compliance, use only shielded inter-

face cables when connecting to a computer or peripheral. Also, any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. 6-M-1 FCC RF Exposure Warning:

This computer is provided with a PC Card slot that could be used with wireless transmitter(s), which will be spe-

cifically recommended, when they become available. Other third-party wireless transmitter(s) have not been RF exposure evaluated for use with this computer and may not comply with FCC RF exposure requirements.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment must be installed and operated in accordance with provided instructions and minimum 1.5 cm spacing must be provided between antenna and all persons body (excluding extremities of hands, wrist and feet) during wireless modes of operation.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. 25-M-2-1

This product is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range. FCC requires this product to be used indoors for the fre-

quency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite sys-

tems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this product. 25-M-2-1 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: