FCC ID: TX2-RTL8822CE 802.11a/b/g/n/ac RTL8822CE Combo Module

by: Realtek Semiconductor Corp. latest update: 2024-05-27 model: RTL8822CE

Two Hundred And Eighty Nine grants have been issued under this FCC ID from 11/02/2018 to 05/27/2024 (this is one of one hundred and seventeen releases in 2024 for this grantee). Public details available include frequency information, manuals, and internal & external photos. some products also feature user submitted or linked instructions, password defaults, warrantee terms, troubleshooting guides, & drivers.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various E18882 E1600WKA UM draft10 Users Manual pdf 4.56 MiB March 31 2022 / September 27 2022 delayed release
various E20075 E1600WKA QSG V2 draft2 Users Manual pdf 1.82 MiB March 31 2022 / September 27 2022 delayed release
various Host UserMan r1 Users Manual pdf 1.15 MiB June 01 2023 / December 02 2023 delayed release
various RN Part 1 Users Manual pdf 5.72 MiB March 29 2022 / September 27 2022 delayed release
various RN Part 3 Users Manual pdf 3.83 MiB March 29 2022 / September 27 2022 delayed release
various User Manual Users Manual pdf 3.54 MiB July 04 2023 / January 01 2024 delayed release
various User Manual-1 Users Manual pdf 2.71 MiB April 20 2022 / April 21 2022
various User Manual-2 Users Manual pdf 5.77 MiB April 20 2022 / April 21 2022
various User Manual-3 Users Manual pdf 96.97 KiB March 21 2022 / September 25 2022 delayed release
various UserMan Users Manual pdf 1.43 MiB April 06 2022 / October 03 2022 delayed release
various UserMan Regulatory Users Manual pdf 1.21 MiB April 06 2022 / October 03 2022 delayed release
various Users Manual Users Manual pdf 3.33 MiB March 29 2022 / September 27 2022 delayed release
various Users Manual-1 Users Manual pdf 711.07 KiB March 23 2022 / September 20 2022 delayed release
various 21-2123 EUT Internal Photos FCC IC Internal Photos pdf 1.89 MiB March 31 2022 / September 27 2022 delayed release
various IntPho Internal Photos pdf 2.71 MiB June 01 2023 / December 02 2023 delayed release
various Internal Photos Internal Photos pdf 2.52 MiB July 04 2023 / January 01 2024 delayed release
various 21-2123 EUT External Photos FCC IC External Photos pdf 1.15 MiB March 31 2022 / September 27 2022 delayed release
various ExtPho External Photos pdf 2.29 MiB June 01 2023 / December 02 2023 delayed release
various External Photos External Photos pdf 1.83 MiB July 04 2023 / January 01 2024 delayed release
various ID Label/Location Info pdf July 04 2023
various ID Label/Location Info ID Label/Location Info pdf 5.22 MiB April 20 2022 / April 21 2022
various ID Label/Location Info pdf April 06 2022 / April 08 2022
various ID Label/Location Info pdf March 31 2022 / April 01 2022
various Label Sample ID Label/Location Info pdf 36.51 KiB June 01 2023 / June 04 2023
various ID Label/Location Info pdf June 01 2023 / June 04 2023
various Attestation Statements pdf July 04 2023
various Cover Letter(s) pdf July 04 2023
various Cover Letter(s) pdf July 04 2023
various Attestation Statements pdf July 04 2023
various Cover Letter(s) pdf July 04 2023
various RF Exposure Info pdf July 04 2023
various RF Exposure Info pdf July 04 2023
various RF Exposure Info pdf July 04 2023
various RF Exposure Info pdf July 04 2023
various RF Exposure Info pdf July 04 2023
various Test Report pdf July 04 2023
various Test Report pdf July 04 2023
various Test Setup Photos SAR Test Setup Photos pdf 452.90 KiB July 04 2023 / January 01 2024 delayed release
various 2023-03-28 FCC Agent Attestation for Realtek Attestation Statements pdf 440.27 KiB June 01 2023 / June 04 2023
various Antenna Sepc Test Report pdf 819.84 KiB June 01 2023 / June 04 2023
various FA2D0131 R01 FCC SAR (photo) Test Setup Photos pdf 88.64 KiB June 01 2023 / December 02 2023 delayed release
various FA2D0131 R01 FCC SAR Appendix A RF Exposure Info pdf 488.11 KiB June 01 2023 / June 04 2023
various FA2D0131 R01 FCC SAR Appendix B RF Exposure Info pdf 552.94 KiB June 01 2023 / June 04 2023
various FA2D0131 R01 FCC SAR Appendix C 1 RF Exposure Info pdf 4.93 MiB June 01 2023 / June 04 2023
various FA2D0131 R01 FCC SAR Appendix C 2 RF Exposure Info pdf 2.46 MiB June 01 2023 / June 04 2023
various FA2D0131 R01 FCC SAR r1 RF Exposure Info pdf 1.31 MiB June 01 2023 / June 04 2023
various cvrltr FCC Attestation Covered List r1 Attestation Statements pdf 209.82 KiB June 01 2023 / June 04 2023
various cvrltr FCC Class II Permissive Change Cover Letter(s) pdf 26.51 KiB June 01 2023 / June 04 2023
various cvrltr FCC Confidentiality Request Cover Letter(s) pdf 447.40 KiB June 01 2023 / June 04 2023
various Power of Attorney Letter Cover Letter(s) pdf 26.84 KiB June 01 2023 / June 04 2023
various Tune-up Procedure 2D0131 Parts List/Tune Up Info pdf June 01 2023 confidential
various Block Diagram Block Diagram pdf August 19 2022 confidential
various Cover Letter(s) pdf August 19 2022 / August 23 2022
various Cover Letter(s) pdf August 19 2022 / August 23 2022
various RF Exposure Info pdf August 19 2022 / August 23 2022
various Schematics Schematics pdf August 19 2022 confidential
various TSUP 15.247+15.407 Test Setup Photos pdf 594.26 KiB August 19 2022 / February 19 2023 delayed release
various TSUP SAR Test Setup Photos pdf 2.32 MiB August 19 2022 / February 19 2023 delayed release
various Test Report pdf August 19 2022 / August 23 2022
various Op Desc Software Security SDR Software/Security Inf pdf August 19 2022 confidential
various Appendix A. SAR Plots of System Verification RF Exposure Info pdf 309.33 KiB April 20 2022 / April 21 2022
various Appendix B. SAR Plots of SAR Measurement RF Exposure Info pdf 461.05 KiB April 20 2022 / April 21 2022
various Appendix C. Calibration Certificate RF Exposure Info pdf 1.91 MiB April 20 2022 / April 21 2022
various Authorization Letter Cover Letter(s) pdf 124.05 KiB April 20 2022 / April 21 2022
various Class II permissive change format letter Cover Letter(s) pdf 56.76 KiB April 20 2022 / April 21 2022
various Confidentiality Cover Letter(s) pdf 324.88 KiB April 20 2022 / April 21 2022
various FCC Power Inconsistency Declaration Letter Cover Letter(s) pdf 214.78 KiB April 20 2022 / April 21 2022
various Test Report SAR RF Exposure Info pdf 1.33 MiB April 20 2022 / April 21 2022
various OpeDes Antenna(INPAQ) Operational Description pdf April 06 2022 confidential
various OpeDes Antenna(South Star) Operational Description pdf April 06 2022 confidential
various Pho SAR Test Setup Photos pdf 110.58 KiB April 06 2022 / October 03 2022 delayed release
various RF Exposure Info pdf April 06 2022 / April 08 2022
various RF Exposure Info pdf April 06 2022 / April 08 2022
various RF Exposure Info pdf April 06 2022 / April 08 2022
various RF Exposure Info pdf April 06 2022 / April 08 2022
various Cover Letter(s) pdf April 06 2022 / April 08 2022
various Cover Letter(s) pdf April 06 2022 / April 08 2022
various TunePro Parts List/Tune Up Info pdf April 06 2022 confidential
various RF Exposure Info pdf March 31 2022 / April 01 2022
various RF Exposure Info pdf March 31 2022 / April 01 2022
various RF Exposure Info pdf March 31 2022 / April 01 2022
various RF Exposure Info pdf March 31 2022 / April 01 2022
various RF Exposure Info pdf March 31 2022 / April 01 2022
various Appendix E Test Setup Photographs E1600WK Test Setup Photos pdf 411.91 KiB March 31 2022 / September 27 2022 delayed release
various Cover Letter(s) pdf March 31 2022 / April 01 2022
various Cover Letter(s) pdf March 31 2022 / April 01 2022
various Cover Letter(s) pdf March 31 2022 / April 01 2022
various Antenna Specification SPD Operational Description pdf March 29 2022 confidential
various Antenna specification ZTX Operational Description pdf March 29 2022 confidential
various Cover Letter(s) pdf March 30 2022
various RF Exposure Info pdf March 29 2022 / March 30 2022
various RF Exposure Info pdf March 29 2022 / March 30 2022
various Tune-up Procedure Parts List/Tune Up Info pdf March 29 2022 confidential
various Cover Letter(s) pdf March 30 2022
various Cover Letter(s) pdf March 21 2022 / March 29 2022
various Operational Description antenna1 Operational Description pdf March 21 2022 confidential
various Operational Description antenna2 Operational Description pdf March 21 2022 confidential
various SAR Report-6 RF Exposure Info pdf 5.42 MiB March 21 2022 / March 29 2022
various SAR Report-7 RF Exposure Info pdf 1.25 MiB March 21 2022 / March 29 2022
various Tune Up Procedure Parts List/Tune Up Info pdf March 21 2022 confidential
various Cover Letter(s) pdf March 28 2022 / March 29 2022
various E18882 E1600WKA UM draft10 Users Manual pdf 4.56 MiB March 31 2022 / September 27 2022 delayed release
various E20075 E1600WKA QSG V2 draft2 Users Manual pdf 1.82 MiB March 31 2022 / September 27 2022 delayed release
various Host UserMan r1 Users Manual pdf 1.15 MiB June 01 2023 / December 02 2023 delayed release
various RN Part 1 Users Manual pdf 5.72 MiB March 29 2022 / September 27 2022 delayed release
various RN Part 3 Users Manual pdf 3.83 MiB March 29 2022 / September 27 2022 delayed release
various User Manual Users Manual pdf 3.54 MiB July 04 2023 / January 01 2024 delayed release
various User Manual-1 Users Manual pdf 2.71 MiB April 20 2022 / April 21 2022
various User Manual-2 Users Manual pdf 5.77 MiB April 20 2022 / April 21 2022
various User Manual-3 Users Manual pdf 96.97 KiB March 21 2022 / September 25 2022 delayed release
various UserMan Users Manual pdf 1.43 MiB April 06 2022 / October 03 2022 delayed release
various UserMan Regulatory Users Manual pdf 1.21 MiB April 06 2022 / October 03 2022 delayed release
various Users Manual Users Manual pdf 3.33 MiB March 29 2022 / September 27 2022 delayed release
various Users Manual-1 Users Manual pdf 711.07 KiB March 23 2022 / September 20 2022 delayed release
various 21-2123 EUT Internal Photos FCC IC Internal Photos pdf 1.89 MiB March 31 2022 / September 27 2022 delayed release
various IntPho Internal Photos pdf 2.71 MiB June 01 2023 / December 02 2023 delayed release
various Internal Photos Internal Photos pdf 2.52 MiB July 04 2023 / January 01 2024 delayed release
various 21-2123 EUT External Photos FCC IC External Photos pdf 1.15 MiB March 31 2022 / September 27 2022 delayed release
various ExtPho External Photos pdf 2.29 MiB June 01 2023 / December 02 2023 delayed release
various External Photos External Photos pdf 1.83 MiB July 04 2023 / January 01 2024 delayed release
various ID Label/Location Info pdf July 04 2023
various ID Label/Location Info ID Label/Location Info pdf 5.22 MiB April 20 2022 / April 21 2022
various ID Label/Location Info pdf April 06 2022 / April 08 2022
various ID Label/Location Info pdf March 31 2022 / April 01 2022
various Label Sample ID Label/Location Info pdf 36.51 KiB June 01 2023 / June 04 2023
various ID Label/Location Info pdf June 01 2023 / June 04 2023
various Attestation Statements pdf July 04 2023
various Cover Letter(s) pdf July 04 2023
various Cover Letter(s) pdf July 04 2023
various Attestation Statements pdf July 04 2023
various Cover Letter(s) pdf July 04 2023
various RF Exposure Info pdf July 04 2023
various RF Exposure Info pdf July 04 2023
various RF Exposure Info pdf July 04 2023
various RF Exposure Info pdf July 04 2023
various RF Exposure Info pdf July 04 2023
various Test Report pdf July 04 2023
various Test Report pdf July 04 2023
various Test Setup Photos SAR Test Setup Photos pdf 452.90 KiB July 04 2023 / January 01 2024 delayed release
various 2023-03-28 FCC Agent Attestation for Realtek Attestation Statements pdf 440.27 KiB June 01 2023 / June 04 2023
various Antenna Sepc Test Report pdf 819.84 KiB June 01 2023 / June 04 2023
various FA2D0131 R01 FCC SAR (photo) Test Setup Photos pdf 88.64 KiB June 01 2023 / December 02 2023 delayed release
various FA2D0131 R01 FCC SAR Appendix A RF Exposure Info pdf 488.11 KiB June 01 2023 / June 04 2023
various FA2D0131 R01 FCC SAR Appendix B RF Exposure Info pdf 552.94 KiB June 01 2023 / June 04 2023
various FA2D0131 R01 FCC SAR Appendix C 1 RF Exposure Info pdf 4.93 MiB June 01 2023 / June 04 2023
various FA2D0131 R01 FCC SAR Appendix C 2 RF Exposure Info pdf 2.46 MiB June 01 2023 / June 04 2023
various FA2D0131 R01 FCC SAR r1 RF Exposure Info pdf 1.31 MiB June 01 2023 / June 04 2023
various cvrltr FCC Attestation Covered List r1 Attestation Statements pdf 209.82 KiB June 01 2023 / June 04 2023
various cvrltr FCC Class II Permissive Change Cover Letter(s) pdf 26.51 KiB June 01 2023 / June 04 2023
various cvrltr FCC Confidentiality Request Cover Letter(s) pdf 447.40 KiB June 01 2023 / June 04 2023
various Power of Attorney Letter Cover Letter(s) pdf 26.84 KiB June 01 2023 / June 04 2023
various Cover Letter(s) pdf August 19 2022 / August 23 2022
various Cover Letter(s) pdf August 19 2022 / August 23 2022
various RF Exposure Info pdf August 19 2022 / August 23 2022
various TSUP 15.247+15.407 Test Setup Photos pdf 594.26 KiB August 19 2022 / February 19 2023 delayed release
various TSUP SAR Test Setup Photos pdf 2.32 MiB August 19 2022 / February 19 2023 delayed release
various Test Report pdf August 19 2022 / August 23 2022
various Appendix A. SAR Plots of System Verification RF Exposure Info pdf 309.33 KiB April 20 2022 / April 21 2022
various Appendix B. SAR Plots of SAR Measurement RF Exposure Info pdf 461.05 KiB April 20 2022 / April 21 2022
various Appendix C. Calibration Certificate RF Exposure Info pdf 1.91 MiB April 20 2022 / April 21 2022
various Authorization Letter Cover Letter(s) pdf 124.05 KiB April 20 2022 / April 21 2022
various Class II permissive change format letter Cover Letter(s) pdf 56.76 KiB April 20 2022 / April 21 2022
various Confidentiality Cover Letter(s) pdf 324.88 KiB April 20 2022 / April 21 2022
various FCC Power Inconsistency Declaration Letter Cover Letter(s) pdf 214.78 KiB April 20 2022 / April 21 2022
various Test Report SAR RF Exposure Info pdf 1.33 MiB April 20 2022 / April 21 2022
various Pho SAR Test Setup Photos pdf 110.58 KiB April 06 2022 / October 03 2022 delayed release
various RF Exposure Info pdf April 06 2022 / April 08 2022
various RF Exposure Info pdf April 06 2022 / April 08 2022
various RF Exposure Info pdf April 06 2022 / April 08 2022
various RF Exposure Info pdf April 06 2022 / April 08 2022
various Cover Letter(s) pdf April 06 2022 / April 08 2022
various Cover Letter(s) pdf April 06 2022 / April 08 2022
various RF Exposure Info pdf March 31 2022 / April 01 2022
various RF Exposure Info pdf March 31 2022 / April 01 2022
various RF Exposure Info pdf March 31 2022 / April 01 2022
various RF Exposure Info pdf March 31 2022 / April 01 2022
various RF Exposure Info pdf March 31 2022 / April 01 2022
various Appendix E Test Setup Photographs E1600WK Test Setup Photos pdf 411.91 KiB March 31 2022 / September 27 2022 delayed release
various Cover Letter(s) pdf March 31 2022 / April 01 2022
various Cover Letter(s) pdf March 31 2022 / April 01 2022
various Cover Letter(s) pdf March 31 2022 / April 01 2022
various Cover Letter(s) pdf March 30 2022
various RF Exposure Info pdf March 29 2022 / March 30 2022
various RF Exposure Info pdf March 29 2022 / March 30 2022
various Cover Letter(s) pdf March 30 2022
various Cover Letter(s) pdf March 21 2022 / March 29 2022
various SAR Report-6 RF Exposure Info pdf 5.42 MiB March 21 2022 / March 29 2022
various SAR Report-7 RF Exposure Info pdf 1.25 MiB March 21 2022 / March 29 2022
various Cover Letter(s) pdf March 28 2022 / March 29 2022

frequency equipment class purpose
1 2024-05-27 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
2 2412 ~ 2472 DTS - Digital Transmission System
3 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
4 2023-07-04 2412 ~ 2472 DTS - Digital Transmission System Class II permissive change or modification of presently authorized equipment
5 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
6 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
7 2023-06-04 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
8 2412 ~ 2472 DTS - Digital Transmission System
9 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
10 2022-08-23 2412 ~ 2472 DTS - Digital Transmission System Class II Permissive Change
11 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
12 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
13 2022-04-21 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
14 2412 ~ 2472 DTS - Digital Transmission System
15 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
16 2022-04-08 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
17 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
18 2412 ~ 2472 DTS - Digital Transmission System
19 2022-04-01 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II permissive change or modification of presently authorized equipment
20 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
21 2412 ~ 2472 DTS - Digital Transmission System
22 2022-03-30 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II Permissive Change
23 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
24 2412 ~ 2472 DTS - Digital Transmission System
25 2022-03-29 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
26 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
27 2412 ~ 2472 DTS - Digital Transmission System
28 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
29 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
30 2412 ~ 2472 DTS - Digital Transmission System
31 2022-03-28 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
32 2412 ~ 2472 DTS - Digital Transmission System
33 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
34 2022-03-22 2412 ~ 2472 DTS - Digital Transmission System
35 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
36 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
37 2022-03-18 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
38 2412 ~ 2472 DTS - Digital Transmission System
39 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
40 2022-03-16 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
41 2412 ~ 2472 DTS - Digital Transmission System
42 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
43 2022-03-15 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
44 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
45 2412 ~ 2472 DTS - Digital Transmission System
46 2022-03-14 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
47 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
48 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
49 2412 ~ 2472 DTS - Digital Transmission System
50 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
51 2412 ~ 2472 DTS - Digital Transmission System
52 2022-03-07 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
53 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
54 2412 ~ 2472 DTS - Digital Transmission System
55 2022-02-21 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
56 2412 ~ 2472 DTS - Digital Transmission System
57 2412 ~ 2472 DTS - Digital Transmission System
58 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
59 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
60 2412 ~ 2472 DTS - Digital Transmission System
61 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
62 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
63 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
64 2022-02-20 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
65 2412 ~ 2472 DTS - Digital Transmission System
66 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
67 2022-01-27 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
68 2412 ~ 2472 DTS - Digital Transmission System
69 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
70 2022-01-25 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
71 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
72 2412 ~ 2472 DTS - Digital Transmission System
73 2412 ~ 2472 DTS - Digital Transmission System
74 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
75 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
76 2022-01-13 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
77 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
78 2412 ~ 2472 DTS - Digital Transmission System
79 2021-12-15 2412 ~ 2472 DTS - Digital Transmission System
80 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
81 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
82 2021-12-14 2412 ~ 2472 DTS - Digital Transmission System
83 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
84 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
85 2021-10-22 2412 ~ 2462 DTS - Digital Transmission System
86 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
87 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
88 2021-09-03 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
89 2412 ~ 2472 DTS - Digital Transmission System
90 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
91 2021-09-02 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
92 2412 ~ 2472 DTS - Digital Transmission System
93 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
94 2021-08-26 2412 ~ 2472 DTS - Digital Transmission System
95 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
96 2021-08-12 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
97 2412 ~ 2472 DTS - Digital Transmission System
98 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
99 2021-07-25 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
100 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
101 2412 ~ 2472 DTS - Digital Transmission System
102 2021-07-06 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
103 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
104 2412 ~ 2472 DTS - Digital Transmission System
105 2021-05-21 2412 ~ 2472 DTS - Digital Transmission System
106 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
107 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
108 2412 ~ 2472 DTS - Digital Transmission System
109 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
110 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
111 2021-05-16 2412 ~ 2472 DTS - Digital Transmission System
112 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
113 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
114 2021-04-27 2412 ~ 2472 DTS - Digital Transmission System
115 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
116 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
117 2021-04-08 2412 ~ 2472 DTS - Digital Transmission System
118 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
119 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
120 2021-04-07 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
121 2412 ~ 2472 DTS - Digital Transmission System
122 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
123 2021-02-26 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
124 2021-02-25 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
125 2412 ~ 2472 DTS - Digital Transmission System
126 2021-01-12 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
127 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
128 2412 ~ 2472 DTS - Digital Transmission System
129 2021-01-07 2412 ~ 2472 DTS - Digital Transmission System
130 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
131 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
132 2021-01-05 2412 ~ 2472 DTS - Digital Transmission System
133 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
134 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
135 2020-12-16 2412 ~ 2472 DTS - Digital Transmission System
136 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
137 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
138 2020-11-09 2412 ~ 2472 DTS - Digital Transmission System
139 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
140 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
141 2020-09-22 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
142 2412 ~ 2472 DTS - Digital Transmission System
143 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
144 2020-09-17 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
145 2412 ~ 2472 DTS - Digital Transmission System
146 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
147 2020-09-16 2412 ~ 2472 DTS - Digital Transmission System
148 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
149 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
150 2020-09-10 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
151 2412 ~ 2472 DTS - Digital Transmission System
152 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
153 2020-09-05 2412 ~ 2472 DTS - Digital Transmission System
154 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
155 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
156 2020-09-04 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
157 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
158 2412 ~ 2472 DTS - Digital Transmission System
159 2020-07-24 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
160 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
161 2412 ~ 2472 DTS - Digital Transmission System
162 2020-07-16 2412 ~ 2472 DTS - Digital Transmission System
163 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
164 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
165 2020-06-18 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
166 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
167 2412 ~ 2472 DTS - Digital Transmission System
168 2020-06-04 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
169 2412 ~ 2472 DTS - Digital Transmission System
170 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
171 2020-06-01 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
172 2412 ~ 2472 DTS - Digital Transmission System
173 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
174 2020-05-26 2412 ~ 2472 DTS - Digital Transmission System
175 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
176 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
177 2020-05-06 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
178 2412 ~ 2472 DTS - Digital Transmission System
179 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
180 2020-05-05 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
181 2412 ~ 2472 DTS - Digital Transmission System
182 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
183 2020-03-16 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
184 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
185 2412 ~ 2472 DTS - Digital Transmission System
186 2020-03-13 2412 ~ 2472 DTS - Digital Transmission System
187 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
188 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
189 2020-03-08 2412 ~ 2472 DTS - Digital Transmission System
190 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
191 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
192 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
193 2412 ~ 2472 DTS - Digital Transmission System
194 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
195 2412 ~ 2472 DTS - Digital Transmission System
196 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
197 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
198 2020-03-07 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
199 2412 ~ 2472 DTS - Digital Transmission System
200 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
201 2020-01-20 2412 ~ 2472 DTS - Digital Transmission System
202 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
203 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
204 2020-01-17 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
205 2412 ~ 2472 DTS - Digital Transmission System
206 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
207 2019-12-24 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
208 2412 ~ 2472 DTS - Digital Transmission System
209 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
210 2019-12-23 2412 ~ 2472 DTS - Digital Transmission System
211 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
212 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
213 2019-11-07 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
214 2412 ~ 2472 DTS - Digital Transmission System
215 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
216 2019-10-23 2412 ~ 2472 DTS - Digital Transmission System
217 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
218 2019-09-27 2412 ~ 2472 DTS - Digital Transmission System
219 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
220 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
221 2412 ~ 2472 DTS - Digital Transmission System
222 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
223 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
224 2019-09-04 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
225 2402 ~ 2480 DTS - Digital Transmission System
226 5260 ~ 5320 NII - Unlicensed National Information Infrastructure TX
227 2019-08-22 2412 ~ 2472 DTS - Digital Transmission System
228 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
229 5260 ~ 5320 NII - Unlicensed National Information Infrastructure TX
230 2019-08-21 2402 ~ 2480 DTS - Digital Transmission System
231 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
232 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
233 2019-08-16 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
234 2412 ~ 2472 DTS - Digital Transmission System
235 2412 ~ 2472 DTS - Digital Transmission System
236 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
237 5180 ~ 5240 NII - Unlicensed National Information Infrastructure TX
238 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
239 2019-08-15 5180 ~ 5240 NII - Unlicensed National Information Infrastructure TX
240 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
241 2412 ~ 2472 DTS - Digital Transmission System
242 2019-08-14 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
243 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
244 2402 ~ 2480 DTS - Digital Transmission System
245 2019-08-06 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II permissive change or modification of presently authorized equipment
246 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II Permissive Change
247 2412 ~ 2472 DTS - Digital Transmission System
248 2412 ~ 2472 DTS - Digital Transmission System Class II permissive change or modification of presently authorized equipment
249 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
250 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
251 2412 ~ 2472 DTS - Digital Transmission System Class II permissive change or modification of presently authorized equipment
252 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
253 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
254 2019-08-01 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
255 2402 ~ 2480 DTS - Digital Transmission System
256 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
257 2019-07-31 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
258 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
259 2412 ~ 2472 DTS - Digital Transmission System
260 2019-07-02 2412 ~ 2472 DTS - Digital Transmission System Class II permissive change or modification of presently authorized equipment
261 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
262 5260 ~ 5320 NII - Unlicensed National Information Infrastructure TX
263 2019-06-28 2412 ~ 2472 DTS - Digital Transmission System
264 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
265 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
266 2019-06-13 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
267 2412 ~ 2472 DTS - Digital Transmission System
268 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
269 2019-05-29 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
270 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
271 2412 ~ 2472 DTS - Digital Transmission System
272 2019-05-26 2412 ~ 2472 DTS - Digital Transmission System
273 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
274 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
275 2019-05-03 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
276 2412 ~ 2472 DTS - Digital Transmission System
277 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
278 2019-04-17 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
279 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
280 2412 ~ 2472 DTS - Digital Transmission System
281 2019-04-11 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
282 2412 ~ 2472 DTS - Digital Transmission System
283 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
284 2019-02-27 2402 ~ 2480 DTS - Digital Transmission System
285 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
286 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
287 2018-11-02 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX Original Equipment
288 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
289 2412 ~ 2472 DTS - Digital Transmission System

Application Forms

app s Applicant Information
various Effective 2024-05-27
various 2023-07-04
various 2023-06-04
various 2022-08-23
various 2022-04-21
various 2022-04-08
various 2022-04-01
various 2022-03-30
various 2022-03-29
various 2022-03-28
various 2022-03-22
various 2022-03-18
various 2022-03-16
various 2022-03-15
various 2022-03-14
various 2022-03-07
various 2022-02-21
various 2022-02-20
various 2022-01-27
various 2022-01-25
various 2022-01-13
various 2021-12-15
various 2021-12-14
various 2021-10-22
various 2021-09-03
various 2021-09-02
various 2021-08-26
various 2021-08-12
various 2021-07-25
various 2021-07-06
various 2021-05-21
various 2021-05-16
various 2021-04-27
various 2021-04-08
various 2021-04-07
various 2021-02-26
various 2021-02-25
various 2021-01-12
various 2021-01-07
various 2021-01-05
various 2020-12-16
various 2020-11-09
various 2020-09-22
various 2020-09-17
various 2020-09-16
various 2020-09-10
various 2020-09-05
various 2020-09-04
various 2020-07-24
various 2020-07-16
various 2020-06-18
various 2020-06-04
various 2020-06-01
various 2020-05-26
various 2020-05-06
various 2020-05-05
various 2020-03-16
various 2020-03-13
various 2020-03-08
various 2020-03-07
various 2020-01-20
various 2020-01-17
various 2019-12-24
various 2019-12-23
various 2019-11-07
various 2019-10-23
various 2019-09-27
various 2019-09-04
various 2019-08-22
various 2019-08-21
various 2019-08-16
various 2019-08-15
various 2019-08-14
various 2019-08-06
various 2019-08-01
various 2019-07-31
various 2019-07-02
various 2019-06-28
various 2019-06-13
various 2019-05-29
various 2019-05-26
various 2019-05-03
various 2019-04-17
various 2019-04-11
various 2019-02-27
various 2018-11-02
various Applicant's complete, legal business name Realtek Semiconductor Corp.
various FCC Registration Number (FRN) 0020109807
various Physical Address No. 2 Innovation Road II, Hsinchu Science Park
various No. 2
various Hsinchu, N/A
various Hsinchu, N/A 300
various Hsinchu
various Hsinchu, 300
various Taiwan
app s TCB Information
various TCB Application Email Address c******@telefication.com
various v******@nemko.com
various K******@sporton-usa.com
various t******@timcoengr.com
various K******@sporton-usa.com
various b******@phoenix-testlab.de
various h******@acbcert.com
various T******@TIMCOENGR.COM
various T******@siemic.com
various t******@siemic.com
various t******@cetecom.com
various c******@nacsemc.com
various t******@us.bureauveritas.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
app s FCC ID
various Grantee Code TX2
various Equipment Product Code RTL8822CE
app s Person at the applicant's address to receive grant or for contact
various Name D**** L******
various Title Project Manager
various Telephone Number 886-3******** Extension:
various 886-3******** Extension:
various Fax Number 886-3********
various E-mail d******@realtek.com
app s Technical Contact
various Firm Name DEKRA Testing and Certification Co., Ltd.
various BTL Inc.
various Shenzhen BALUN Technology Co., Ltd
various Sporton International Inc.
various SGS Taiwan Ltd
various DEKRA Testing and Certification Co., Ltd
various SPORTON International Inc.
various SGS Taiwan Ltd.
various A Test Lab Techno Corp
various A Test Lab Techno Corp.
various Name A**** C******
various S****** L****
various X******** W****
various S****** H****
various I******** C******
various E******** H******
various F******** Y****
various J******** C****
various J******** T********
various A******** C********
various x****** w******
various D**** M****
various J****** L******
various A**** L******
various Physical Address No.26, Huaya 1st Rd., Guishan Dist., Taoyuan City
various No.3 Jinshagang 1st Rd, Shixia
various Block B, FL 1, Baisha Science and Technology Park
various No.18, Ln. 171, Sec. 2, Jiuzong Rd.
various No.52, Huaya 1st Rd., Guishan Dist.
various No.18, Lin. 171, Sec. 2, Jiuzong Rd., Neihu Dist.
various 134, Wu Kung Road, WuKu Industrial Zone
various 4F, No.18, Ln. 171, Sec. 2, Jiuzong Rd.
various No.52, HwaYa 1st Rd., Kwei-Shan District
various No.5-22, Ruishukeng, Linkou Dist.
various No.52, Huaya 1st Rd., Guishan Dist
various No.18, Ln. 171, Sec. 2, Jiuzong Rd., Neihu Dist.
various No.3 Jinshagang 1st Rd, Shixia, Dalang
various No. 29, Jintang Road, Tangzhen Industry
various No. 140-1, Changan Street, Bade District
various Taoyuan, 333
various Taoyuan City
various New Taipei City
various New Taipei City, 24451
various Shanghai
various Taiwan
various China
various Telephone Number +8863********
various +8676********
various +8675********
various +8862********
various 886-3********
various 886-2********
various 886 2********
various 886-2********
various +8862********
various 86-75********
various 88622******** Extension:
various 86-76******** Extension:
various 86-76********
various 86-02********
various 886-3********
various Fax Number 886-3********
various 86-76********
various 86-75********
various 886-2********
various 886-3********
various 886 2********
various 886-2********
various 886-3********
various 88622********
various 886-3********
various E-mail a******@dekra.com
various s******@newbtl.com
various x******@baluntek.com
various S******@newbtl.com
various i******@sporton.com.tw
various E******@sporton.com.tw
various S******@newbtl.com
various S******@newbtl.com
various f******@dekra.com
various j******@sgs.com
various j******@sporton.com.tw
various a******@sporton.com.tw
various M******@newbtl.com
various d******@newbtl.com
various j******@atl-lab.com.tw
various a******@dekra.com
app s Non Technical Contact
various Firm Name DEKRA Testing and Certification Co., Ltd.
various BTL Inc.
various Shenzhen BALUN Technology Co., Ltd
various Sporton International Inc.
various SGS Taiwan Ltd
various Bureau Veritas Consumer Products Services Ltd.
various SGS Taiwan Ltd.
various Name A******** C****
various R**** L******
various T******** Z********
various M**** W********
various I******** C****
various G******** C******
various J**** C****
various A******** W********
various M******** W****
various M****** L******
various Physical Address No.26, Huaya 1st Rd., Guishan Dist., Taoyuan City
various No.3 Jinshagang 1st Rd, Shixia
various Block B, FL 1, Baisha Science and Technology Park
various No.18, Ln. 171, Sec. 2, Jiuzong Rd.
various No.52, HwaYa 1st Rd., Guishan Dist.
various No.18, Lin. 171, Sec. 2, Jiuzong Rd., Neihu Dist.
various 134, Wu Kung Road, WuKu Industrial Zone
various 4F, No.18, Ln. 171, Sec. 2, Jiuzong Rd.
various No.19, Hwa Ya 2nd Rd.
various No.18, Ln. 171, Sec. 2, Jiuzong Rd., Neihu Dist.
various No.3 Jinshagang 1st Rd, Shixia, Dalang
various No. 29, Jintang Road, Tangzhen Industry
various Taoyuan, 333
various Taoyuan City
various Shanghai
various Taiwan
various China
various Telephone Number +8863********
various +8676********
various 86-75********
various +8862********
various 886-3********
various 886-2********
various 886 2********
various 886-3********
various 86-75********
various 88622******** Extension:
various 86-76******** Extension:
various 86-75********
various 86-76********
various 86-02********
various Fax Number 886-3********
various 86-76********
various 86-75********
various 886-2********
various 886-3********
various 886-2********
various 886 2********
various 88622********
various E-mail a******@dekra.com
various R******@newbtl.com
various y******@baluntek.com
various M******@newbtl.com
various I******@sporton.com.tw
various G******@newbtl.com
various j******@sgs.com
various a******@bureauveritas.com
various M******@newbtl.com
various m******@newbtl.com
various M******@newbtl.com
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
variousYes
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)01/01/2024
various12/02/2023
various02/19/2023
various10/03/2022
various09/27/2022
various09/25/2022
various09/20/2022
various09/18/2022
various09/13/2022
various09/12/2022
various09/10/2022
various09/03/2022
various08/20/2022
various08/14/2022
various07/25/2022
various02/27/2022
various04/17/2022
various03/03/2022
various03/01/2022
various02/19/2022
various02/08/2022
various01/22/2022
various11/15/2021
various11/03/2021
various10/24/2021
various05/18/2021
various10/04/2021
various03/01/2021
various07/11/2021
various07/06/2021
various07/04/2021
various06/15/2021
various05/09/2021
various03/18/2021
various10/30/2020
various03/15/2021
various03/09/2021
various03/04/2021
various01/20/2021
various01/12/2021
various11/29/2020
various11/17/2020
various11/03/2020
various11/02/2020
various09/12/2020
various09/09/2020
various09/04/2020
various07/16/2020
various06/29/2020
various06/21/2020
various06/20/2020
various05/05/2020
various04/21/2020
various03/25/2020
various02/27/2020
various02/17/2020
various02/12/2020
various02/11/2020
various02/10/2020
various01/30/2020
various01/28/2020
various01/27/2020
various12/29/2019
various12/25/2019
various12/11/2019
various10/30/2019
various10/13/2019
various10/07/2019
various04/13/2019
various05/01/2019
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassNII - Unlicensed National Information Infrastructure TX
variousDTS - Digital Transmission System
variousDSS - Part 15 Spread Spectrum Transmitter
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)802.11a/b/g/n/ac RTL8822CE Combo Module
various802.11a/b/g/n/ac RTL8822CE Combo module
various802.11 a/b/g/n/ac RTL8822CE Combo module
various802.11 a/b/g/n/ac RTL8822CE Combo Module
various802.11 a/b/g/n/ac RTL8822CE
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousYes
variousModular Equipment TypeSingle Modular Approval
variousLimited Single Modular Approval
variousDoes not apply
variousPurpose / Application is forClass II Permissive Change
variousClass II permissive change or modification of presently authorized equipment
variousOriginal Equipment
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?Yes
variousNo
variousGrant CommentsClass II Permissive Change : This change is to incorporate this Module into a 12 Inch Rugged Tablet (Brand : Handheld Group , Model :ALGIZ 12XR), to reduce output power through firmware and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.066 W/kg and 0.562 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. This is a portable device. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into a 12 Inch Rugged Tablet (Brand : Handheld Group , Model :ALGIZ 12XR), to reduce output power through firmware and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.186 W/kg and 1.285 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. This is a portable device. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into a 12 Inch Rugged Tablet (Brand : Handheld Group , Model :ALGIZ 12XR), to reduce output power through firmware and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are <0.10 W/kg and 1.203 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. This is a portable device. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the portable configuration host of Advantech Computer, model: MIT-W102 as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.76 W/kg and 1.05 W/kg, respectively.
variousPower listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the portable configuration host of Advantech Computer, model: MIT-W102 as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are <0.10W/kg. and 1.59 W/kg, respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the portable configuration host of Advantech Computer, model: MIT-W102 as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.19 W/kg and 1.59 W/kg, respectively.
variousPower listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change: Class II Permissive Change: Enables portable use when integrated into the Handheld Group Tablet ALGIZ 10XR. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.35 W/kg and 0.36 W/kg, respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change: Enables portable use when integrated into the Handheld Group Tablet ALGIZ 10XR. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 1.13 W/kg and 1.13 W/kg, respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. Class II Permissive Change: Enables portable use when integrated into the Handheld Group Tablet ALGIZ 10XR. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 1.04 W/kg and 1.04 W/kg, respectively.
variousPower listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Only those antennas tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change: Authorizes portable use when integrated into onyx Model ONYX-MD101 Mobile Medical Assistant Tablets The highest reported SAR for use on the body and simultaneous transmission exposure conditions are 0.43 W/kg and 0.57 W/kg, respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antennas tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. Class II Permissive Change: Authorizes portable use when integrated into onyx Model ONYX-MD101 Mobile Medical Assistant Tablets. The highest reported SAR for use on the body and simultaneous transmission exposure conditions are 0.93 W/kg and 1.42 W/kg, respectively.
variousPower listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. This is a portable device. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antennas tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change: Authorizes portable use when integrated into onyx Model ONYX-MD101 Mobile Medical Assistant Tablets. The highest reported SAR for use on the body and simultaneous transmission exposure conditions are < 0.10 W/kg and 0.50 W/kg, respectively.
variousClass II Permissive Change : This change is to incorporate this Module into a Notebook Computer (Brand : Lenovo , Model : Lenovo Slim 7 16ARH7, Lenovo Slim 7 16ARH7xxxxxx, (The "x" in the model name can be 0 to 9, A to Z, a to z, "-" or blank, it represents different sales customer code, all models only name difference)) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are <0.10 W/kg and 0.57 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. This is a portable device. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change : This change is to incorporate this Module into a Notebook Computer (Brand : Lenovo , Model : Lenovo Slim 7 16ARH7, Lenovo Slim 7 16ARH7xxxxxx, (The "x" in the model name can be 0 to 9, A to Z, a to z, "-" or blank, it represents different sales customer code, all models only name difference)) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.28 W/kg and 0.50 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. This is a portable device. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into a Notebook Computer (Brand : Lenovo , Model : Lenovo Slim 7 16ARH7, Lenovo Slim 7 16ARH7xxxxxx, (The "x" in the model name can be 0 to 9, A to Z, a to z, "-" or blank, it represents different sales customer code, all models only name difference)) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.63 W/kg and 1.18 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. This is a portable device. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, Lenovo 300e Chromebook 2nd Gen AST. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are < 0.10 W/kg and 0.83 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, Lenovo 300e Chromebook 2nd Gen AST. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 1.20 W/kg and 1.20 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, Lenovo 300e Chromebook 2nd Gen AST. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.85 W/kg and 1.32 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousPower listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: E1600WK.; Brand: ASUS, with antenna High-Tek, model no.: 0ACCN021036N, 0ACCN021035N and Southstar Technology Co.,LTD, model no.: N12-8030-R0A, N12-8029-R0A. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are <0.10 W/kg and 1.02 W/kg at 1g tissues, respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: E1600WK.; Brand: ASUS, with antenna High-Tek, model no.: 0ACCN021036N, 0ACCN021035N and Southstar Technology Co.,LTD, model no.: N12-8030-R0A, N12-8029-R0A. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.69 W/kg and 1.02 W/kg at 1g tissues, respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: E1600WK.; Brand: ASUS, with antenna High-Tek, model no.: 0ACCN021036N, 0ACCN021035N and Southstar Technology Co.,LTD, model no.: N12-8030-R0A, N12-8029-R0A. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.56 W/kg and 0.89 W/kg at 1g tissues, respectively.
variousClass II Permissive Change : This change is to incorporate this Module into a Notebook Computer (Brand : Lenovo , Model : IdeaPad 5 Pro 16ARH7, IdeaPad 5 Pro 16IAH7) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.09 W/kg and 0.425 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. This is a portable device. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change : This change is to incorporate this Module into a Notebook Computer (Brand : Lenovo , Model : IdeaPad 5 Pro 16ARH7, IdeaPad 5 Pro 16IAH7) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.34 W/kg and 0.675 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. This is a portable device. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into a Notebook Computer (Brand : Lenovo , Model : IdeaPad 5 Pro 16ARH7, IdeaPad 5 Pro 16IAH7) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.17 W/kg and 0.328 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. This is a portable device. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousPower listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P159G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.56 W/kg and 1.48 W/kg, respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P158G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.20 W/kg and 0.34 W/kg, respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P158G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.12 W/kg and 0.14 W/kg, respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P159G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.06 W/kg and 1.48 W/kg, respectively.
variousPower listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P158G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are <0.10 W/kg and 0.23 W/kg, respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P159G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.99 W/kg and 1.41 W/kg, respectively.
variousClass II Permissive Change : This change is to incorporate this Module into a Notebook Computer (Brand : Lenovo , Model : 81MC, Lenovo 500e Chromebook 2nd Genxxxxxx, Lenovo 300e Chromebook 2nd Genxxxxxx, 81MCxxxxxx, 81MBxxxxxx(Thex in the model name can be 0 to 9, A to Z, a to z, - or blank), it represents different sales customer code, all models only name difference)) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.115 W/kg and 1.115 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. This is a portable device. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into a Notebook Computer (Brand : Lenovo , Model : 81MC, Lenovo 500e Chromebook 2nd Genxxxxxx, Lenovo 300e Chromebook 2nd Genxxxxxx, 81MCxxxxxx, 81MBxxxxxx(Thex in the model name can be 0 to 9, A to Z, a to z, - or blank), it represents different sales customer code, all models only name difference)) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.592 W/kg and 1.120 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. This is a portable device. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into a Notebook Computer (Brand : Lenovo , Model : 81MC, Lenovo 500e Chromebook 2nd Genxxxxxx, Lenovo 300e Chromebook 2nd Genxxxxxx, 81MCxxxxxx, 81MBxxxxxx(Thex in the model name can be 0 to 9, A to Z, a to z, - or blank), it represents different sales customer code, all models only name difference)) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.036 W/kg and 0.845 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. This is a portable device. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, Model: IdeaPad 5 14ABA7. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.50 W/kg and 0.99 W/kg, respectively.
variousPower listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, Model: IdeaPad 5 14ABA7. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are < 0.10 W/kg and 0.77 W/kg, respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. Class II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, Model: IdeaPad 5 14ABA7. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.75 W/kg and 1.38 W/kg, respectively.
variousClass II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, IdeaPad 5 Pro 14ARH7. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.66 W/kg and 1.06 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, IdeaPad 5 Pro 14ARH7. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.46 W/kg and 0.68 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, IdeaPad 5 Pro 14ARH7. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are < 0.10 W/kg and 0.67 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. Class II Permissive Change: Enables portable use when integrated into the hp Notebook Computer, Model: S2022. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 1.09 W/kg and 1.12 W/kg, respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change: Enables portable use when integrated into the hp Notebook Computer, Model: S2022. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.72 W/kg and 1.28 W/kg, respectively.
variousPower listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change: Enables portable use when integrated into the hp Notebook Computer, Model: S2022. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are <0.1 W/kg and 1.12 W/kg, respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. Class II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, Model: IdeaPad 5 Pro 14IAP7. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.78 W/kg and 1.42 W/kg, respectively.
variousPower listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, Model: IdeaPad 5 Pro 14IAP7. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are <0.1 W/kg and 0.65 W/kg, respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, Model: IdeaPad 5 Pro 14IAP7. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.64 W/kg and 0.96 W/kg, respectively.
variousPower listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, Model: IdeaPad Flex 5 14ALC7, IdeaPad Flex 5 14ABA7, IdeaPad Flex 5 14IAU7. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are <0.1 W/kg and 0.46 W/kg, respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. Class II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, Model: IdeaPad Flex 5 14ALC7, IdeaPad Flex 5 14ABA7, IdeaPad Flex 5 14IAU7. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.65 W/kg and 1.11 W/kg, respectively.
variousPower listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, Model: IdeaPad Flex 5 16ALC7, IdeaPad Flex 5 16ABA7, IdeaPad Flex 5 16IAU7. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.25 W/kg and 0.94 W/kg, respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, Model: IdeaPad Flex 5 14ALC7, IdeaPad Flex 5 14ABA7, IdeaPad Flex 5 14IAU7. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.43 W/kg and 0.68 W/kg, respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. Class II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, Model: IdeaPad Flex 5 16ALC7, IdeaPad Flex 5 16ABA7, IdeaPad Flex 5 16IAU7. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.41 W/kg and 0.71 W/kg, respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, Model: IdeaPad Flex 5 16ALC7, IdeaPad Flex 5 16ABA7, IdeaPad Flex 5 16IAU7. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.69 W/kg and 1.02 W/kg, respectively.
variousPower listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, IdeaPad 5 14IAL7. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are < 0.10 W/kg and 0.72 W/kg, respectively
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. Class II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, IdeaPad 5 14IAL7. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.70 W/kg and 1.37 W/kg, respectively
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, IdeaPad 5 14IAL7. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.68 W/kg and 1.25 W/kg, respectively
variousClass II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, ThinkBook 14 G4 ABA. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.59 W/kg and 1.07 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, ThinkBook 14 G4 ABA. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.68 W/kg and 1.12 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, ThinkBook 15 G4 IAP. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.78 W/kg and 1.39 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, ThinkBook 15 G4 IAP. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.33 W/kg and 0.57 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, ThinkBook 15 G4 IAP. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are < 0.10 W/kg and 0.84 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, ThinkBook 15 G4 ABA. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.39 W/kg and 0.78 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, ThinkBook 15 G4 ABA. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are < 0.10 W/kg and 0.77 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, ThinkBook 14 G4 ABA. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are < 0.10 W/kg and 0.71 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, ThinkBook 15 G4 ABA. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.70 W/kg and 1.37 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, ThinkBook 14 G4 IAP. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are < 0.10 W/kg and 0.51 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, ThinkBook 14 G4 IAP. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.49 W/kg and 0.88 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, ThinkBook 14 G4 IAP. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.31 W/kg and 0.56 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into a portable computer (Brand : Lenovo , Model : IP Flex 3 Chrome 15IJL7, IP Flex 3 Chrome 15IJL7xxxxxx (The"x" in the model name can be 0 to 9, A to Z, a to z , "-" or blank, it represents different sales customer code, all models only name difference)) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.226 W/kg and 1.974 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. This is a portable device. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into a portable computer (Brand : Lenovo , Model : IP Flex 3 Chrome 15IJL7, IP Flex 3 Chrome 15IJL7xxxxxx (The"x" in the model name can be 0 to 9, A to Z, a to z , "-" or blank, it represents different sales customer code, all models only name difference)) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.939 W/kg and 1.502 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. This is a portable device. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into a portable computer (Brand : Lenovo , Model : IP Flex 3 Chrome 15IJL7, IP Flex 3 Chrome 15IJL7xxxxxx (The"x" in the model name can be 0 to 9, A to Z, a to z , "-" or blank, it represents different sales customer code, all models only name difference)) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.407 W/kg and 1.633 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. This is a portable device. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousPower listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P117F, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.16 W/kg and 0.87 W/kg, respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P157G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.16 W/kg and 1.31 W/kg, respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P157G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.63 W/kg and 1.08 W/kg, respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P117F, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.19 W/kg and 1.19 W/kg, respectively.
variousPower listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P157G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.15 W/kg and 1.31 W/kg, respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P117F, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.70 W/kg and 1.33 W/kg, respectively.
variousClass II Permissive Change : This change is to incorporate this Module into a portable computer(Brand : Lenovo , Model : Yoga 6 13ALC7) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.12 W/kg and 1.48 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into a portable computer(Brand : Lenovo , Model : Yoga 6 13ALC7) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.11 W/kg and 1.06 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change : This change is to incorporate this Module into a portable computer(Brand : Lenovo , Model : Yoga 6 13ALC7) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.85 W/kg and 1.15 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. This device contains 5GHz WLAN and Bluetooth transmitters. This C2PC filing establishes portable category for ASUS platform with models: TP1401K, J1401K and P1401FK, along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.68 W/kg and 1.04 W/kg, respectively.
variousPower listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device contains 2.4GHz/5GHz WLAN and BLE transmitters. This C2PC filing establishes portable category for ASUS platform with models: TP1401K, J1401K and P1401FK, along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.14 W/kg and 1.22 W/kg, respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. This device contains 2.4GHz WLAN and BT/BLE transmitters. This C2PC filing establishes portable category for ASUS platform with models: TP1401K, J1401K and P1401FK, along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 1.08 W/kg and 1.22 W/kg, respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. This device contains 5GHz WLAN and Bluetooth transmitters. This C2PC filing establishes portable category for ASUS platform with models: TP1400K, J1400K and P1400FK, along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.77 W/kg and 1.37 W/kg, respectively.
variousPower listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device contains 2.4GHz/5GHz WLAN and BLE transmitters. This C2PC filing establishes portable category for ASUS platform with models: TP1400K, J1400K and P1400FK, along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.17 W/kg and 1.20 W/kg, respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. This device contains 2.4GHz WLAN and BT/BLE transmitters. This C2PC filing establishes portable category for ASUS platform with models: TP1400K, J1400K and P1400FK, along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 1.07 W/kg and 1.53 W/kg, respectively.
variousClass II Permissive Change : This change is to add new Host(Brand/Model Number: Microsoft/2016. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change : This change is to add new Host(Brand/Model Number: Microsoft/2016. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change : This change is to add new Host(Brand/Model Number: Microsoft/2016. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into a portable computer(Brand : Lenovo , Model: Lenovo 500e Chromebook Gen 3) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.18 W/kg and 1.67 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into a portable computer(Brand : Lenovo , Model: Lenovo 500e Chromebook Gen 3) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.44 W/kg and 1.39 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into a portable computer(Brand : Lenovo , Model: Lenovo 500e Chromebook Gen 3) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.21 W/kg and 1.39 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. Class II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, Model: Lenovo 300e 2nd Gen. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.63 W/kg and 1.15 W/kg, respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, Model: Lenovo 300e 2nd Gen. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.41 W/kg and 0.78 W/kg, respectively.
variousPower listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change: Enables portable use when integrated into the Lenovo Notebook Computer, Model: Lenovo 300e 2nd Gen. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are < 0.10 W/kg and 0.57 W/kg, respectively.
variousClass II Permissive Change: Enables portable use when integrated into the Getac Notebook Computer, Model: S410, S410G4, S410-4012C, S410-4212D, S410-4212E. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.36W/kg and 1.59W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change: Enables portable use when integrated into the Getac Notebook Computer, Model: S410, S410G4, S410-4012C, S410-4212D, S410-4212E. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.91W/kg and 1.59W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousPower listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: CM3200FM1 and CL3200FM1, with antenna INPAQ, part no. MDA-LB-02-031, MDA-LB-01-019, 14008-04430300 and 14008-04430200. The highest reported Body and Simultaneous SAR values are <0.10W/kg and 0.54W/kg respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: CM3200FM1 and CL3200FM1, with antenna INPAQ, part no. MDA-LB-02-031, MDA-LB-01-019, 14008-04430300 and 14008-04430200. The highest reported Body and Simultaneous SAR values are 0.80W/kg and 1.29W/kg respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: CM3200FM1 and CL3200FM1, with antenna INPAQ, part no. MDA-LB-02-031, MDA-LB-01-019, 14008-04430300 and 14008-04430200. The highest reported Body and Simultaneous SAR values are 1.02W/kg and 1.52W/kg respectively.
variousClass II Permissive Change the RF Exposure condition from mobile device to portable device condition with PIFA antenna (2.4GHz band antenna gain 3.5dBi, 5GHz band antenna gain 5dBi). The highest reported SAR for body and simultaneous transmission exposure condition is 0.57W/kg and 1.35W/kg respectively. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0.5cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P139G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are <0.10W/kg and 0.87 W/kg, respectively.
variousClass II Permissive Change the RF Exposure condition from mobile device to portable device condition with PIFA antenna (2.4GHz band antenna gain 3.5dBi, 5GHz band antenna gain 5dBi). The highest reported SAR for body and simultaneous transmission exposure condition is 0.78W/kg and 1.35W/kg respectively. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0.5cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P139G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.81 W/kg and 1.13 W/kg, respectively.
variousClass II Permissive Change the RF Exposure condition from mobile device to portable device condition with PIFA antenna (2.4GHz band antenna gain 3.5dBi, 5GHz band antenna gain 5dBi). The highest reported SAR for body and simultaneous transmission exposure condition is 0.73W/kg and 1.35W/kg respectively. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0.5cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P139G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.87 W/kg and 1.18 W/kg, respectively.
variousClass II Permissive Change : This change is to incorporate this Module into a portable computer(Brand : Lenovo , Model: Lenovo 300e Chromebook Gen3**********(*=0~9, A~Z, a~z, "-" or blank ) ) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.20 W/kg and 1.20 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into a portable computer(Brand : Lenovo , Model: Lenovo 300e Chromebook Gen3**********(*=0~9, A~Z, a~z, "-" or blank ) ) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.22 W/kg and 1.16 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change : This change is to incorporate this Module into a portable computer(Brand : Lenovo , Model: Lenovo 300e Chromebook Gen3**********(*=0~9, A~Z, a~z, "-" or blank ) ) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.38 W/kg and 0.68 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook/tablet computer(Brand : Lenovo , Model number :Lenovo 300w Gen 3) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.39 W/kg and 0.73 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook/tablet computer(Brand : Lenovo , Model number :TP000126A) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.18 W/kg and 0.96 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook/tablet computer(Brand : Lenovo , Model number :Lenovo 300w Gen 3) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.01 W/kg and 1.48 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook/tablet computer(Brand : Lenovo , Model number :TP000126A) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.69W/kg and 1.44 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook/tablet computer(Brand : Lenovo , Model number :Lenovo 300w Gen 3) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.13 W/kg and 0.81 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook/tablet computer(Brand : Lenovo , Model number :Lenovo TP000126A) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.18 W/kg and 1.44 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook/tablet computer(Brand : Lenovo , Model number :Lenovo 300w Gen 3) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.32 W/kg and 1.44 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook/tablet computer(Brand : Lenovo , Model number :Lenovo 300w Gen 3) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.21 W/kg and 1.37 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook/tablet computer(Brand : Lenovo , Model number :Lenovo 300w Gen 3) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.16 W/kg and 1.44 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change: Authorizes portable use when integrated into the Lenovo Notebook Computer, Model: IP Flex 3 Chrome 11IJL6. The highest reported SAR use on the body and simultaneous transmission exposure conditions are 0.98 W/kg and 0.98 W/kg, respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. Class II Permissive Change: Authorizes portable use when integrated into the Lenovo Notebook Computer, Model: IP Flex 3 Chrome 11IJL6. The highest reported SAR use on the body and simultaneous transmission exposure conditions are 0.75 W/kg and 0.98 W/kg, respectively.
variousPower listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change: Authorizes portable use when integrated into the Lenovo Notebook Computer, Model: IP Flex 3 Chrome 11IJL6. The highest reported SAR use on the body and simultaneous transmission exposure conditions are < 0.10 W/kg and 0.77 W/kg, respectively.
variousCIIPC to for module to add to Notebook Computer Lenovo 300e Chromebook Gen 3. Highest reported SAR for Body, Simultaneous Transmission are: 0.53 W/kg, 0.56 W/kg. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousCIIPC to for module to add to Notebook Computer Lenovo 300e Chromebook Gen 3. Highest reported SAR for Body, Simultaneous Transmission are: 0.96 W/kg, 0.99 W/kg. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousCIIPC to for module to add to Notebook Computer Lenovo 300e Chromebook Gen 3. Highest reported SAR for Body, Simultaneous Transmission are: <0.10 W/kg, 0.99 W/kg. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousPower listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change: Authorizes portable use when integrated into the HP Notebook PC, Model: TPN-Q268, when integrated using the following antennas: Vendor: High-Tek Electronics Co., Ltd, Type: PIFA Part Number: DQ60ACQD086 (0ACQD020004N), Color: Black Part Number: DQ60ACQD0A6 (0ACQDO20058N), Color: White Vendor: INPAQ Corporation, Type: PIFA Part Number: DQ60PLBLB43(WA-P-LBLB-02-114), Color: Black Part Number: DQ60PLBLB55(WA-P-LBLB-01-004), Color: White
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change: Authorizes portable use when integrated into the HP Notebook PC, Model: TPN-Q268. The highest reported SAR use on the body and simultaneous transmission exposure conditions are 0.77 W/kg and 1.47 W/kg, respectively, when integrated using the following antennas: Vendor: High-Tek Electronics Co., Ltd, Type: PIFA Part Number: DQ60ACQD086 (0ACQD020004N), Color: Black Part Number: DQ60ACQD0A6 (0ACQDO20058N), Color: White Vendor: INPAQ Corporation, Type: PIFA Part Number: DQ60PLBLB43(WA-P-LBLB-02-114), Color: Black Part Number: DQ60PLBLB55(WA-P-LBLB-01-004), Color: White
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. Class II Permissive Change: Authorizes portable use when integrated into the HP Notebook PC, Model: TPN-Q268. The highest reported SAR use on the body and simultaneous transmission exposure conditions are 1.24 W/kg and 1.24 W/kg, respectively, when integrated using the following antennas: Vendor: High-Tek Electronics Co., Ltd, Type: PIFA Part Number: DQ60ACQD086 (0ACQD020004N), Color: Black Part Number: DQ60ACQD0A6 (0ACQDO20058N), Color: White Vendor: INPAQ Corporation, Type: PIFA Part Number: DQ60PLBLB43(WA-P-LBLB-02-114), Color: Black Part Number: DQ60PLBLB55(WA-P-LBLB-01-004), Color: White
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. Class II Permissive Change: Limited Single Modular Approval, to reduce Bluetooth power, disable beamforming mode and address the module in a new host of ASUS Developer Board Kit, model number: DKSC-101, as documented in this filing.
variousPower listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change: Limited Single Modular Approval, to reduce Bluetooth power, disable beamforming mode and address the module in a new host of ASUS Developer Board Kit, model number: DKSC-101, as documented in this filing.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change: Limited Single Modular Approval, to reduce Bluetooth power, disable beamforming mode and address the module in a new host of ASUS Developer Board Kit, model number: DKSC-101, as documented in this filing.
variousLimited Single Modular Approval. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Permissive Change: Add portable use mode when integrated into the HP Notebook Computer, Model: HSN-I43C-5.
variousLimited Single Modular Approval. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20, 40 and 80 MHz modes. Class II Permissive Change: Add portable use mode when integrated into the HP Notebook Computer, Model: HSN-I43C-5. The highest reported SAR for body and simultaneous transmission exposure condition is 0.98 W/kg and 1.13 W/kg respectively.
variousLimited Single Modular Approval. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20 and 40 MHz bandwidth modes. Class II Permissive Change: Add portable use mode when integrated into the HP Notebook Computer, Model: HSN-I43C-5. The highest reported SAR for body and simultaneous transmission exposure condition is 0.92 W/kg and 1.07 W/kg respectively.
variousLimited Single Modular Approval. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20 and 40 MHz bandwidth modes. Class II Permissive Change: Add portable use mode when integrated into the HP Notebook Computer, Model: HSN-I43C-4. The highest reported SAR for body and simultaneous transmission exposure condition is 0.87 W/kg and 0.96 W/kg respectively.
variousLimited Single Modular Approval. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20, 40 and 80 MHz bandwidth modes. Class II Permissive Change: Add portable use mode when integrated into the HP Notebook Computer, Model: HSN-I43C-4. The highest reported SAR for body and simultaneous transmission exposure condition is 1.01 W/kg and 1.16 W/kg respectively.
variousLimited Single Modular Approval. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Permissive Change: Add portable use mode when integrated into the HP Notebook Computer, Model: HSN-I43C-4.
variousLimited Single Modular Approval. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20 and 40 MHz bandwidth modes. Class II Permissive Change: Add portable use mode when integrated into the HP Notebook Computer, Model: HSN-I43C. The highest reported SAR for body and simultaneous transmission exposure condition is 0.80 W/kg and 1.48 W/kg respectively.
variousLimited Single Modular Approval. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Permissive Change: Add portable use mode when integrated into the HP Notebook Computer, Model: HSN-I43C.
variousLimited Single Modular Approval. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20, 40 and 80 MHz bandwidth modes. Class II Permissive Change: Add portable use mode when integrated into the HP Notebook Computer, Model: HSN-I43C. The highest reported SAR for body and simultaneous transmission exposure condition is 1.09 W/kg and 1.23 W/kg respectively.
variousC2PC to add HP Notebook computer, Model: HSN-I44C. The highest reported SAR for body and simultaneous transmission exposure condition is 0.44W/kg and 0.45W/kg respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousC2PC to add HP Notebook computer, Model: HSN-I44C. The highest reported SAR for body and simultaneous transmission exposure condition is <0.10W/kg and 0.90W/kg respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousC2PC to add HP Notebook computer, Model: HSN-I44C. The highest reported SAR for body and simultaneous transmission exposure condition is 0.90W/kg and 0.90W/kg respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions.OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for portable category specific host Notebook PC, model number ASUS TP470E,J470E, R460E and SF470E with antenna INPAQ, part no. WA-F-LB-02-224, WAF- LB-01-088, WA-F-LB-030153 and AWAN, part no. AYF6Y-100023, AYF6Y-100024, AYF6Y-100126. The highest reported reported Body and Simultaneous SAR values are 1.11 W/kg and 1.00W/kg.
variousPower listed is the maximum conducted output power. Single Modular Approval for mobileRF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance withFCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for portable category specific host Notebook PC, model number ASUS TP470E,J470E, R460E and SF470E with antenna INPAQ, part no. WA-F-LB-02-224, WA-F-LB-01-088, WA-F-LB-030153 and AWAN, part no. AYF6Y-100023, AYF6Y-100024, AYF6Y-100126. The highest reported reported Body and Simultaneous SAR values are 0.13 W/kg and 1.05W/kg.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions.OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for portable category specific host Notebook PC, model number ASUS TP470E,J470E, R460E and SF470E with antenna INPAQ, part no. WA-F-LB-02-224, WAF- LB-01-088, WA-F-LB-030153 and AWAN, part no. AYF6Y-100023, AYF6Y-100024, AYF6Y-100126. The highest reported reported Body and Simultaneous SAR values are 1.05 W/kg and 1.19W/kg.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook/tablet computer(Brand : Lenovo , Model number : Yoga Slim 7 Pro 14ITL5) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.13 W/kg and 0.54 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook/tablet computer(Brand : Lenovo , Model number : Yoga Slim 7 Pro 14ITL5) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.34 W/kg and 0.64 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook/tablet computer(Brand : Lenovo , Model number : Yoga Slim 7 Pro 14ITL5) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.50 W/kg and 0.91 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousC2PC to add Lenovo Notebook Computer ThinkBook 14s Yoga ITL. The max. allowed antenna gain for PIFA type is 1.81dBi for 5GHz and 1.72dBi for 2.4GHz (South Star parts number DC33002GO00/ N12-6584-R0A), and 0.65dBi for 5GHz and -0.39dBi for 2.4GHz (High-Tek Electronics Co., Ltd parts number DC33002GP00/ 0ACCN020003N). The highest reported SAR for body and simultaneous transmission exposure condition is 0.14W/kg and 1.02W/kg respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousC2PC to add Lenovo Notebook Computer ThinkBook 14s Yoga ITL. The max. allowed antenna gain for PIFA type is 1.81dBi for 5GHz and 1.72dBi for 2.4GHz (South Star parts number DC33002GO00/ N12-6584-R0A), and 0.65dBi for 5GHz and -0.39dBi for 2.4GHz (High-Tek Electronics Co., Ltd parts number DC33002GP00/ 0ACCN020003N). The highest reported SAR for body and simultaneous transmission exposure condition is 0.70W/kg and 0.84W/kg respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousC2PC to add Lenovo Notebook Computer ThinkBook 14s Yoga ITL. The max. allowed antenna gain for PIFA type is 1.81dBi for 5GHz and 1.72dBi for 2.4GHz (South Star parts number DC33002GO00/ N12-6584-R0A), and 0.65dBi for 5GHz and -0.39dBi for 2.4GHz (High-Tek Electronics Co., Ltd parts number DC33002GP00/ 0ACCN020003N). The highest reported SAR for body and simultaneous transmission exposure condition is 0.88W/kg and 1.02W/kg respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change: integration into the HP Notebook Computer Model HSN-I39C. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.78 W/kg and 1.18 W/kg, respectively. Toenail WWAN Sku: Vendor: HONG-BO, Type: PIFA, Part Number: 6036B0279601 (260-27448), 6036B0279201 (260-27449) Toenail WLAN Sku: Vendor: HONG-BO, Type: PIFA, Part Number: 6036B0279501 (260-27446), 6036B0279301 (260-27447) Vendor: AWAN, Type: PIFA, Part Number: AUP6Y-100077 (6036B0278801), AUP6Y-100078 (6036B0279001) Vendor: INPAQ Corporation, Type: PIFA, Part Number: 6036B0280301 (WA-P-LB-02-788), 6036B0280201 (WA-P-LB-02-789) Pocket WLAN Sku: Vendor: HONG-BO, Type: PIFA, Part Number: 6036B0278901 (260-27450), 6036B0279401 (260-27451) Vendor: AWAN, Type: PIFA, Part Number: AUP6Y-100079 (6036B0279901), AUP6Y-100080 (6036B0279101) Vendor: INPAQ Corporation, Type: PIFA, Part Number: 6036B0280101 (WA-P-LB-02-786), 6036B0280001 (WA-P-LB-02-787) Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change: integration into the HP Notebook Computer Model HSN-I39C. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 1.12 W/kg and 1.17 W/kg, respectively. Toenail WWAN Sku: Vendor: HONG-BO, Type: PIFA, Part Number: 6036B0279601 (260-27448), 6036B0279201 (260-27449) Toenail WLAN Sku: Vendor: HONG-BO, Type: PIFA, Part Number: 6036B0279501 (260-27446), 6036B0279301 (260-27447) Vendor: AWAN, Type: PIFA, Part Number: AUP6Y-100077 (6036B0278801), AUP6Y-100078 (6036B0279001) Vendor: INPAQ Corporation, Type: PIFA, Part Number: 6036B0280301 (WA-P-LB-02-788), 6036B0280201 (WA-P-LB-02-789) Pocket WLAN Sku: Vendor: HONG-BO, Type: PIFA, Part Number: 6036B0278901 (260-27450), 6036B0279401 (260-27451) Vendor: AWAN, Type: PIFA, Part Number: AUP6Y-100079 (6036B0279901), AUP6Y-100080 (6036B0279101) Vendor: INPAQ Corporation, Type: PIFA, Part Number: 6036B0280101 (WA-P-LB-02-786), 6036B0280001 (WA-P-LB-02-787) Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change: integration into the HP Notebook Computer Model HSN-I39C. Toenail WWAN Sku: Vendor: HONG-BO, Type: PIFA, Part Number: 6036B0279601 (260-27448), 6036B0279201 (260-27449) Toenail WLAN Sku: Vendor: HONG-BO, Type: PIFA, Part Number: 6036B0279501 (260-27446), 6036B0279301 (260-27447) Vendor: AWAN, Type: PIFA, Part Number: AUP6Y-100077 (6036B0278801), AUP6Y-100078 (6036B0279001) Vendor: INPAQ Corporation, Type: PIFA, Part Number: 6036B0280301 (WA-P-LB-02-788), 6036B0280201 (WA-P-LB-02-789) Pocket WLAN Sku: Vendor: HONG-BO, Type: PIFA, Part Number: 6036B0278901 (260-27450), 6036B0279401 (260-27451) Vendor: AWAN, Type: PIFA, Part Number: AUP6Y-100079 (6036B0279901), AUP6Y-100080 (6036B0279101) Vendor: INPAQ Corporation, Type: PIFA, Part Number: 6036B0280101 (WA-P-LB-02-786), 6036B0280001 (WA-P-LB-02-787) Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change: This change is to incorporate this Module into a Notebook computer (Brand: HP, Model number: TPN-Q232) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change: This change is to incorporate this Module into a Notebook computer (Brand: HP, Model number: TPN-Q232) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change: This change is to incorporate this Module into a Notebook computer (Brand: HP, Model number: TPN-Q232) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook/tablet computer(Brand : Lenovo , Model number : Yoga 7 14ITL5) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.10 W/kg and 1.51 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook/tablet computer(Brand : Lenovo , Model number : Yoga 7 14ITL5) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.14 W/kg and 1.47 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook/tablet computer(Brand : Lenovo , Model number : Yoga 7 14ITL5) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.34 W/kg and 1.05 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook/tablet computer(Brand : Lenovo , Model number : Yoga 7 15ITL5) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.47 W/kg and 1.59 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook/tablet computer(Brand : Lenovo , Model number : Yoga 7 15ITL5) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.05 W/kg and 1.48 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook/tablet computer(Brand : Lenovo , Model number : Yoga 7 15ITL5) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.12 W/kg and 1.59 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change with a decrease in the WLAN Output Power are through firmware, add to request approval for portable category specific host notebook/tablet (IdeaPad Flex 3 11ADA05, IdeaPad Flex 3 11ADA05xxxxxx, 82G4, 82G4xxxxxx) with antenna INPAQ, part no. WA-F-LB-02-207, WA-F-LB-01-081 and Shenzhen South Star Technology, part no. N12-6280-R0A, N12-6281-R0A. Single Modular Approval. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change with a decrease in the WLAN Output Power are through firmware, add to request approval for portable category specific host notebook/tablet (IdeaPad Flex 3 11ADA05, IdeaPad Flex 3 11ADA05xxxxxx, 82G4, 82G4xxxxxx) with antenna INPAQ, part no. WA-F-LB-02-207, WA-F-LB-01-081 and Shenzhen South Star Technology, part no. N12-6280-R0A, N12-6281-R0A. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body exposure and simultaneous use conditions are 1.19 W/kg, and 1.22 W/kg, respectively. Single Modular Approval. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change with a decrease in the WLAN Output Power are through firmware, add to request approval for portable category specific host notebook/tablet (IdeaPad Flex 3 11ADA05, IdeaPad Flex 3 11ADA05xxxxxx, 82G4, 82G4xxxxxx) with antenna INPAQ, part no. WA-F-LB-02-207, WA-F-LB-01-081 and Shenzhen South Star Technology, part no. N12-6280-R0A, N12-6281-R0A. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body exposure and simultaneous use conditions are 1.11 W/kg, and 1.22 W/kg, respectively. Single Modular Approval. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change: Enable integration into HP Notebook PC, Model: TPN-Q251. The highest reported SAR in this application for stand-alone and simultaneous transmission exposure conditions are 0.92 W/kg and 0.98 W/kg, respectively. Antenna Information: Vendor: INPAQ, Type: PIFA, Part Number: DQ60PLBLB43 Vendor: High-Tek Electronics Co., Ltd, Type: PIFA, Part Number: DQ60ACQD086
variousPower listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change: Enable integration into HP Notebook PC, Model: TPN-Q251. Antenna Information: Vendor: INPAQ, Type: PIFA, Part Number: DQ60PLBLB43 Vendor: High-Tek Electronics Co., Ltd, Type: PIFA, Part Number: DQ60ACQD086
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. Class II Permissive Change: Enable integration into HP Notebook PC, Model: TPN-Q251. The highest reported SAR in this application for stand-alone and simultaneous transmission exposure conditions are 1.15 W/kg and 1.30 W/kg, respectively. Antenna Information: Vendor: INPAQ, Type: PIFA, Part Number: DQ60PLBLB43 Vendor: High-Tek Electronics Co., Ltd, Type: PIFA, Part Number: DQ60ACQD086
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: TP401M and J401M. The highest reported Body and Simultaneous SAR values are 0.693W/kg and 0.841W/kg respectively.
variousPower listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: TP401M and J401M. The highest reported Body and Simultaneous SAR values are 0.148W/kg and 0.841W/kg respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: TP401M and J401M. The highest reported Body and Simultaneous SAR values are 0.627W/kg and 0.775W/kg respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: TM420I, J420I and R432I, with antenna INPAQ, part no. WA-P-LBLB-04-081 and SPEED, part no. F-0G-XZ-0231-000-00. The highest reported Body and Simultaneous SAR values are 0.41W/kg and 0.79W/kg respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: TM420I, J420I and R432I, with antenna INPAQ, part no. WA-P-LBLB-04-081 and SPEED, part no. F-0G-XZ-0231-000-00. The highest reported Body and Simultaneous SAR values are 0.16W/kg and 0.28W/kg respectively.
variousPower listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host of ASUS Notebook PC, model number: TM420I, J420I and R432I, with antenna INPAQ, part no. WA-P-LBLB-04-081 and SPEED, part no. F-0G-XZ-0231-000-00. The highest reported Body and Simultaneous SAR values are <0.10W/kg and 0.45W/kg respectively.
variousC2PC to add HP Notebook computer, Model: HSN-I37C-5. The max. allowed antenna gain for PIFA type is 0.44dBi for 5GHz and -1.44dBi for 2.4GHz (WNC parts number 6036B0253801 (81EABB15.G50)) and -2.07dBi for 2.4GHz (HONG-BO parts number 6036B0258001(260-27382)) and -1.99dBi for 5GHz (HONG-BO parts number 6036B0257401(260-27381)), and 0.69dBi for 5GHz and 0.64dBi for 2.4GHz (AWAN parts number 6036B0256601(AUP6Y-100042)) The highest reported SAR for body and simultaneous transmission exposure condition is <0.10W/kg and 1.07W/kg respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousC2PC to add HP Notebook computer, Model: HSN-I37C-5. The max. allowed antenna gain for PIFA type is 0.44dBi for 5GHz and -1.44dBi for 2.4GHz (WNC parts number 6036B0253801 (81EABB15.G50)) and -2.07dBi for 2.4GHz (HONG-BO parts number 6036B0258001(260-27382)) and -1.99dBi for 5GHz (HONG-BO parts number 6036B0257401(260-27381)), and 0.69dBi for 5GHz and 0.64dBi for 2.4GHz (AWAN parts number 6036B0256601(AUP6Y-100042)) The highest reported SAR for body and simultaneous transmission exposure condition is 0.80W/kg and 0.83W/kg respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousC2PC to add HP Notebook computer, Model: HSN-I37C-5. The max. allowed antenna gain for PIFA type is 0.44dBi for 5GHz and -1.44dBi for 2.4GHz (WNC parts number 6036B0253801 (81EABB15.G50)) and -2.07dBi for 2.4GHz (HONG-BO parts number 6036B0258001(260-27382)) and -1.99dBi for 5GHz (HONG-BO parts number 6036B0257401(260-27381)), and 0.69dBi for 5GHz and 0.64dBi for 2.4GHz (AWAN parts number 6036B0256601(AUP6Y-100042)) The highest reported SAR for body and simultaneous transmission exposure condition is 1.04W/kg and 1.07W/kg respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousC2PC: 1. The subject approved module is being used in different host (Portable category Configuration, Host Brand/Model: HP/TPN-Q235). 2. SAR Testing is performed to demonstrate RF Compliance. 3. The difference compared with the original design is adding 4 antennas to this EUT. Antenna is of same type and lower gain from original approval. PIFA Antenna, Supplier: High-Tek Electronics Co., Ltd Part number: DQ60ACQD047 (0ACQD019039N) (Ant1) DQ60ACQD047 (0ACQD019039N) (Ant2) PIFA Antenna, Supplier: WNC Part number: DQ6B15G7800 (81EABB15.G78) (Ant1) DQ6B15G7800 (81EABB15.G78) (Ant2) Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.07 W/kg and 0.10 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousC2PC: 1. The subject approved module is being used in different host (Portable category Configuration, Host Brand/Model: HP/TPN-Q235). 2. SAR Testing is performed to demonstrate RF Compliance. 3. The difference compared with the original design is adding 4 antennas to this EUT. Antenna is of same type and lower gain from original approval. PIFA Antenna, Supplier: High-Tek Electronics Co., Ltd Part number: DQ60ACQD047 (0ACQD019039N) (Ant1) DQ60ACQD047 (0ACQD019039N) (Ant2) PIFA Antenna, Supplier: WNC Part number: DQ6B15G7800 (81EABB15.G78) (Ant1) DQ6B15G7800 (81EABB15.G78) (Ant2) Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR value for simultaneous transmission is : 0.07 W/kg, Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousC2PC: 1. The subject approved module is being used in different host (Portable category Configuration, Host Brand/Model: HP/TPN-Q235). 2. SAR Testing is performed to demonstrate RF Compliance. 3. The difference compared with the original design is adding 4 antennas to this EUT. Antenna is of same type and lower gain from original approval. PIFA Antenna, Supplier: High-Tek Electronics Co., Ltd Part number: DQ60ACQD047 (0ACQD019039N) (Ant1) DQ60ACQD047 (0ACQD019039N) (Ant2) PIFA Antenna, Supplier: WNC Part number: DQ6B15G7800 (81EABB15.G78) (Ant1) DQ6B15G7800 (81EABB15.G78) (Ant2) Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.04 W/kg and 0.05 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousC2PC to add HP Notebook computer, Model: HSN-I37C. The max. allowed antenna gain for PIFA type is 1.36dBi for 5GHz (WNC parts number 6036B0253901 (81EABB15.G38)) and 0.65dBi for 2.4GHz (WNC parts number 6036B0253701 (81EABB15.G37)), 0.19dBi for 2.4GHz and -3.13dBi for 5GHz (HONG-BO parts number 6036B0258401(260-27369)), and 1.85dBi for 5GHz and -0.30dBi for 2.4GHz (AWAN parts number 6036B0255401(AUP6Y-100029)). The highest reported SAR for body and simultaneous transmission exposure condition is 1.03W/kg and 1.33W/kg respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousC2PC to add HP Notebook computer, Model: HSN-I37C. The max. allowed antenna gain for PIFA type is 1.36dBi for 5GHz (WNC parts number 6036B0253901 (81EABB15.G38)) and 0.65dBi for 2.4GHz (WNC parts number 6036B0253701 (81EABB15.G37)), 0.19dBi for 2.4GHz and -3.13dBi for 5GHz (HONG-BO parts number 6036B0258401(260-27369)), and 1.85dBi for 5GHz and -0.30dBi for 2.4GHz (AWAN parts number 6036B0255401(AUP6Y-100029)). The highest reported SAR for body and simultaneous transmission exposure condition is 0.67W/kg and 1.21W/kg respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousC2PC to add HP Notebook computer, Model: HSN-I37C. The max. allowed antenna gain for PIFA type is 1.36dBi for 5GHz (WNC parts number 6036B0253901 (81EABB15.G38)) and 0.65dBi for 2.4GHz (WNC parts number 6036B0253701 (81EABB15.G37)), 0.19dBi for 2.4GHz and -3.13dBi for 5GHz (HONG-BO parts number 6036B0258401(260-27369)), and 1.85dBi for 5GHz and -0.30dBi for 2.4GHz (AWAN parts number 6036B0255401(AUP6Y-100029)). The highest reported SAR for body and simultaneous transmission exposure condition is <0.10W/kg and 1.33W/kg respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousC2PC to add HP Notebook computer, Model: HSN-I37C-4. The max. allowed antenna gain for PIFA type is -0.94dBi for 5GHz and -1.22dBi for 2.4GHz (WNC parts number 6036B0254601 (81EABB15.G44)) and -0.7dBi for 2.4GHz (HONG-BO parts number 6036B0258101(260-27376)) and -0.21dBi for 5GHz (HONG-BO parts number 6036B0258701(260-27375)), and 0.3dBi for 5GHz (AWAN parts number 6036B0256401(AUP6Y-100036)) and -2.46dBi for 2.4GHz (AWAN parts number 6036B0256101 (AUP6Y-100035)). The highest reported SAR for body and simultaneous transmission exposure condition is 1.07W/kg and 1.08W/kg respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousC2PC to add HP Notebook computer, Model: HSN-I37C-4. The max. allowed antenna gain for PIFA type is -0.94dBi for 5GHz and -1.22dBi for 2.4GHz (WNC parts number 6036B0254601 (81EABB15.G44)) and -0.7dBi for 2.4GHz (HONG-BO parts number 6036B0258101(260-27376)) and -0.21dBi for 5GHz (HONG-BO parts number 6036B0258701(260-27375)), and 0.3dBi for 5GHz (AWAN parts number 6036B0256401(AUP6Y-100036)) and -2.46dBi for 2.4GHz (AWAN parts number 6036B0256101 (AUP6Y-100035)). The highest reported SAR for body and simultaneous transmission exposure condition is 0.77W/kg and 1.54W/kg respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousC2PC to add HP Notebook computer, Model: HSN-I37C-4. The max. allowed antenna gain for PIFA type is -0.94dBi for 5GHz and -1.22dBi for 2.4GHz (WNC parts number 6036B0254601 (81EABB15.G44)) and -0.7dBi for 2.4GHz (HONG-BO parts number 6036B0258101(260-27376)) and -0.21dBi for 5GHz (HONG-BO parts number 6036B0258701(260-27375)), and 0.3dBi for 5GHz (AWAN parts number 6036B0256401(AUP6Y-100036)) and -2.46dBi for 2.4GHz (AWAN parts number 6036B0256101 (AUP6Y-100035)). The highest reported SAR for body and simultaneous transmission exposure condition is <0.10W/kg and 1.08W/kg respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousPower listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change: Enable integration into Lenovo Notebook Computer, Model: IdeaPad Flex 5 15IIL05. The highest reported SAR in this application for stand-alone and simultaneous transmission exposure conditions are <0.10 W/kg and 1.28 W/kg, respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. Class II Permissive Change: Enable integration into Lenovo Notebook Computer, Model: IdeaPad Flex 5 15IIL05. The highest reported SAR in this application for stand-alone and simultaneous transmission exposure conditions are 1.02 W/kg and 1.28 W/kg, respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change: Enable integration into Lenovo Notebook Computer, Model: IdeaPad Flex 5 15IIL05. The highest reported SAR in this application for stand-alone and simultaneous transmission exposure conditions are 1.20 W/kg and 1.14 W/kg, respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change: Enable integration into Lenovo Notebook Computer, Models: IdeaPad Flex 5 14ARE05 and IdeaPad Flex 5 14IIL05. The highest reported SAR in this application for stand-alone and simultaneous transmission exposure conditions are 1.18 W/kg and 1.18 W/kg, respectively.
variousPower listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change: Enable integration into Lenovo Notebook Computer, Models: IdeaPad Flex 5 14ARE05 and IdeaPad Flex 5 14IIL05. The highest reported SAR in this application for stand-alone and simultaneous transmission exposure conditions are <0.10 W/kg and 1.00 W/kg, respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. Class II Permissive Change: Enable integration into Lenovo Notebook Computer, Models: IdeaPad Flex 5 14ARE05 and IdeaPad Flex 5 14IIL05. The highest reported SAR in this application for stand-alone and simultaneous transmission exposure conditions are 1.09 W/kg and 1.09 W/kg, respectively.
variousClass II Permissive Change for correcting the antenna model for a portable host (Model: Lenovo ThinkBook 14-IML, 20RV; Brand: Lenovo) as described in this filing. The highest reported SAR value for Laptop PC Mode and simultaneous transmitting exposure conditions are 0.94 W/kg and 1.34 W/kg respectively. Main/TX1 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4700 (81EAA615.G47): BT/ 2.4 GHz: 0.93 dBi; 5.15-5.35 GHz: 1.68 dBi; 5.47-5.725 GHz: 1.33 dBi; 5.725-5.85 GHz: 1.35 dBi. Aux/TX2 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4700 (81EAA615.G47): BT/ 2.4 GHz: 0.69 dBi; 5.15-5.35 GHz: 1.52 dBi; 5.47-5.725 GHz: 1.54 dBi; 5.725-5.85 GHz: 1.86 dBi. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change for correcting the antenna model for a portable host (Model: Lenovo ThinkBook 14-IML, 20RV; Brand: Lenovo) as described in this filing. Main/TX1 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4700 (81EAA615.G47): BT/2.4 GHz: 0.93 dBi; 5.15-5.35 GHz: 1.68 dBi; 5.47-5.725 GHz: 1.33 dBi; 5.725-5.85 GHz: 1.35 dBi. Aux/TX2 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4700 (81EAA615.G47): BT/2.4 GHz: 0.69 dBi; 5.15-5.35 GHz: 1.52 dBi; 5.47-5.725 GHz: 1.54 dBi; 5.725-5.85 GHz: 1.86 dBi. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change for correcting the antenna model for a portable host (Model: Lenovo ThinkBook 15-IML, 20RW; Brand: Lenovo) as described in this filing. The highest reported SAR value for Laptop PC Mode and simultaneously transmitting exposure conditions are 1.19 W/kg and 1.36 W/kg respectively. Main/TX1 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4900 (81EAA615.G49) BT/2.4 GHz: 0.68 dBi; 5.15-5.35 GHz: 0.46 dBi; 5.47-5.725 GHz: 0.79 dBi; 5.725-5.85 GHz: 0.79 dBi. Aux/TX2 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4900 (81EAA615.G49) BT/2.4 GHz: 0.60 dBi; 5.15-5.35 GHz: -1.35 dBi; 5.47-5.725 GHz: 0.05 dBi; 5.725-5.85 GHz: 0.05 dBi. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change for correcting the antenna model for a portable host (Model: Lenovo ThinkBook 15-IML, 20RW; Brand: Lenovo) as described in this filing. Main/TX1 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4900 (81EAA615.G49) BT/2.4 GHz: 0.68 dBi; 5.15-5.35 GHz: 0.46 dBi; 5.47-5.725 GHz: 0.79 dBi; 5.725-5.85 GHz: 0.79 dBi. Aux/TX2 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4900 (81EAA615.G49) BT/2.4 GHz: 0.60 dBi; 5.15-5.35 GHz: -1.35 dBi; 5.47-5.725 GHz: 0.05 dBi; 5.725-5.85 GHz: 0.05 dBi. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change for adding one new portable host platform (Model: IdeaPad Slim 7 14ARE05; Brand: Lenovo), as described in this filing. The highest reported SAR value for body and simultaneously transmitting exposure conditions are 0.31 W/kg and 1.14 W/kg respectively. Wistron Neweb Corporation (Main: DQ6615G8600 (81EAA615.G86) & Aux: DQ6615G8600 (81EAA615.G86)): 2.4GHz & Bluetooth: Main PIFA antenna with -1.80 dBi gain Aux. PIFA antenna with -1.18 dBi gain 5.15~5.35 GHz: Main PIFA antenna with -0.26 dBi gain Aux. PIFA antenna with -0.15 dBi gain 5.47~5.725 GHz: Main PIFA antenna with -1.13 dBi gain Aux. PIFA antenna with -2.01 dBi gain 5.725~5.85 GHz: Main PIFA antenna with -0.80 dBi gain Aux. PIFA antenna with -2.01 dBi gain Wistron Neweb Corporation (Main: DQ6615G9300 (81EAA615.G93) & Aux: DQ6615G9300 (81EAA615.G93)): 2.4GHz & Bluetooth: Main PIFA antenna with -2.27 dBi gain Aux. PIFA antenna with -0.53 dBi gain 5.15~5.35 GHz: Main PIFA antenna with -0.53 dBi gain Aux. PIFA antenna with -0.29 dBi gain 5.47~5.725 GHz: Main PIFA antenna with -1.55 dBi gain Aux. PIFA antenna with -0.82 dBi gain 5.725~5.85 GHz: Main PIFA antenna with -1.19 dBi gain Aux. PIFA antenna with -0.99 dBi gain High-Tek Electronics Co., Ltd (Main: DQ60ACQD063 (0ACQD019089N) & Aux: DQ60ACQD063 (0ACQD019089N)): 2.4GHz & Bluetooth: Main PIFA antenna with -1.71 dBi gain Aux. PIFA antenna with 0.75 dBi gain 5.15~5.35 GHz: Main PIFA antenna with -0.03 dBi gain Aux. PIFA antenna with -0.5 dBi gain 5.47~5.725 GHz: Main PIFA antenna with 1.88 dBi gain Aux. PIFA antenna with 0.27 dBi gain 5.725~5.85 GHz: Main PIFA antenna with 2.8 dBi gain Aux. PIFA antenna with 0.27 dBi gain High-Tek Electronics Co., Ltd (Main: DQ60ACQD064 (0ACQD019069N) & Aux: DQ60ACQD064 (0ACQD019069N)): 2.4GHz & Bluetooth: Main PIFA antenna with 0.05 dBi gain Aux. PIFA antenna with -0.86 dBi gain 5.15~5.35 GHz: Main PIFA antenna with 1.74 dBi gain Aux. PIFA antenna with -0.71 dBi gain 5.47~5.725 GHz: Main PIFA antenna with 2.27 dBi gain Aux. PIFA antenna with 0.92 dBi gain 5.725~5.85 GHz: Main PIFA antenna with 2.87 dBi gain Aux. PIFA antenna with 0.13 dBi gain Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change for adding one new portable host platform (Model: IdeaPad Slim 7 14ARE05; Brand: Lenovo), as described in this filing. The highest reported SAR value for body and simultaneously transmitting exposure conditions are 1.12 W/kg and 1.14 W/kg respectively. Wistron Neweb Corporation (Main: DQ6615G8600 (81EAA615.G86) & Aux: DQ6615G8600 (81EAA615.G86)): 2.4GHz & Bluetooth: Main PIFA antenna with -1.80 dBi gain Aux. PIFA antenna with -1.18 dBi gain 5.15~5.35 GHz: Main PIFA antenna with -0.26 dBi gain Aux. PIFA antenna with -0.15 dBi gain 5.47~5.725 GHz: Main PIFA antenna with -1.13 dBi gain Aux. PIFA antenna with -2.01 dBi gain 5.725~5.85 GHz: Main PIFA antenna with -0.80 dBi gain Aux. PIFA antenna with -2.01 dBi gain Wistron Neweb Corporation (Main: DQ6615G9300 (81EAA615.G93) & Aux: DQ6615G9300 (81EAA615.G93)): 2.4GHz & Bluetooth: Main PIFA antenna with -2.27 dBi gain Aux. PIFA antenna with -0.53 dBi gain 5.15~5.35 GHz: Main PIFA antenna with -0.53 dBi gain Aux. PIFA antenna with -0.29 dBi gain 5.47~5.725 GHz: Main PIFA antenna with -1.55 dBi gain Aux. PIFA antenna with -0.82 dBi gain 5.725~5.85 GHz: Main PIFA antenna with -1.19 dBi gain Aux. PIFA antenna with -0.99 dBi gain High-Tek Electronics Co., Ltd (Main: DQ60ACQD063 (0ACQD019089N) & Aux: DQ60ACQD063 (0ACQD019089N)): 2.4GHz & Bluetooth: Main PIFA antenna with -1.71 dBi gain Aux. PIFA antenna with 0.75 dBi gain 5.15~5.35 GHz: Main PIFA antenna with -0.03 dBi gain Aux. PIFA antenna with -0.5 dBi gain 5.47~5.725 GHz: Main PIFA antenna with 1.88 dBi gain Aux. PIFA antenna with 0.27 dBi gain 5.725~5.85 GHz: Main PIFA antenna with 2.8 dBi gain Aux. PIFA antenna with 0.27 dBi gain High-Tek Electronics Co., Ltd (Main: DQ60ACQD064 (0ACQD019069N) & Aux: DQ60ACQD064 (0ACQD019069N)): 2.4GHz & Bluetooth: Main PIFA antenna with 0.05 dBi gain Aux. PIFA antenna with -0.86 dBi gain 5.15~5.35 GHz: Main PIFA antenna with 1.74 dBi gain Aux. PIFA antenna with -0.71 dBi gain 5.47~5.725 GHz: Main PIFA antenna with 2.27 dBi gain Aux. PIFA antenna with 0.92 dBi gain 5.725~5.85 GHz: Main PIFA antenna with 2.87 dBi gain Aux. PIFA antenna with 0.13 dBi gain Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change for correcting the antenna model for a portable host (Model: Lenovo ThinkBook 15-IML, 20RW; Brand: Lenovo) as described in this filing. The highest reported SAR value for Laptop PC Mode and simultaneously transmitting exposure conditions are 0.94 W/kg and 1.36 W/kg respectively. Main/TX1 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4900 (81EAA615.G49) BT/2.4 GHz: 0.68 dBi; 5.15-5.35 GHz: 0.46 dBi; 5.47-5.725 GHz: 0.79 dBi; 5.725-5.85 GHz: 0.79 dBi. Aux/TX2 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4900 (81EAA615.G49) BT/2.4 GHz: 0.60 dBi; 5.15-5.35 GHz: -1.35 dBi; 5.47-5.725 GHz: 0.05 dBi; 5.725-5.85 GHz: 0.05 dBi. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change for adding one new portable host platform (Model: IdeaPad Slim 7 14ARE05; Brand: Lenovo), as described in this filing. The highest reported SAR value for body and simultaneously transmitting exposure conditions are <0.10 W/kg and 1.14 W/kg respectively. Wistron Neweb Corporation (Main: DQ6615G8600 (81EAA615.G86) & Aux: DQ6615G8600 (81EAA615.G86)): 2.4GHz & Bluetooth: Main PIFA antenna with -1.80 dBi gain Aux. PIFA antenna with -1.18 dBi gain 5.15~5.35 GHz: Main PIFA antenna with -0.26 dBi gain Aux. PIFA antenna with -0.15 dBi gain 5.47~5.725 GHz: Main PIFA antenna with -1.13 dBi gain Aux. PIFA antenna with -2.01 dBi gain 5.725~5.85 GHz: Main PIFA antenna with -0.80 dBi gain Aux. PIFA antenna with -2.01 dBi gain Wistron Neweb Corporation (Main: DQ6615G9300 (81EAA615.G93) & Aux: DQ6615G9300 (81EAA615.G93)): 2.4GHz & Bluetooth: Main PIFA antenna with -2.27 dBi gain Aux. PIFA antenna with -0.53 dBi gain 5.15~5.35 GHz: Main PIFA antenna with -0.53 dBi gain Aux. PIFA antenna with -0.29 dBi gain 5.47~5.725 GHz: Main PIFA antenna with -1.55 dBi gain Aux. PIFA antenna with -0.82 dBi gain 5.725~5.85 GHz: Main PIFA antenna with -1.19 dBi gain Aux. PIFA antenna with -0.99 dBi gain High-Tek Electronics Co., Ltd (Main: DQ60ACQD063 (0ACQD019089N) & Aux: DQ60ACQD063 (0ACQD019089N)): 2.4GHz & Bluetooth: Main PIFA antenna with -1.71 dBi gain Aux. PIFA antenna with 0.75 dBi gain 5.15~5.35 GHz: Main PIFA antenna with -0.03 dBi gain Aux. PIFA antenna with -0.5 dBi gain 5.47~5.725 GHz: Main PIFA antenna with 1.88 dBi gain Aux. PIFA antenna with 0.27 dBi gain 5.725~5.85 GHz: Main PIFA antenna with 2.8 dBi gain Aux. PIFA antenna with 0.27 dBi gain High-Tek Electronics Co., Ltd (Main: DQ60ACQD064 (0ACQD019069N) & Aux: DQ60ACQD064 (0ACQD019069N)): 2.4GHz & Bluetooth: Main PIFA antenna with 0.05 dBi gain Aux. PIFA antenna with -0.86 dBi gain 5.15~5.35 GHz: Main PIFA antenna with 1.74 dBi gain Aux. PIFA antenna with -0.71 dBi gain 5.47~5.725 GHz: Main PIFA antenna with 2.27 dBi gain Aux. PIFA antenna with 0.92 dBi gain 5.725~5.85 GHz: Main PIFA antenna with 2.87 dBi gain Aux. PIFA antenna with 0.13 dBi gain Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change for correcting the antenna model for a portable host (Model: Lenovo ThinkBook 14-IML, 20RV; Brand: Lenovo) as described in this filing. The highest reported SAR value for Laptop PC Mode and simultaneous transmitting exposure conditions are 1.17 W/kg and 1.34 W/kg respectively. Main/TX1 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4700 (81EAA615.G47): BT/2.4 GHz: 0.93 dBi; 5.15-5.35 GHz: 1.68 dBi; 5.47-5.725 GHz: 1.33 dBi; 5.725-5.85 GHz: 1.35 dBi. Aux/TX2 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4700 (81EAA615.G47): BT/2.4 GHz: 0.69 dBi; 5.15-5.35 GHz: 1.52 dBi; 5.47-5.725 GHz: 1.54 dBi; 5.725-5.85 GHz: 1.86 dBi. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousC2PC to add HP Notebook computer, Model: TPN-I137. The max. allowed antenna gain for PIFA type is 2.86dBi for 5GHz and 1.8dBi for 2.4GHz (AWAN parts number 6036B0263601 (AUP5Y-100000)) under Laptop Mode and allowed antenna gain for PIFA type under Tablet Mode is -0.01dBi for 5GHz and -1.47dBi for 2.4GHz (AWAN parts number 6036B0263601 (AUP5Y-100000)). The other PIFA type gain is 0.29dBi for 5GHz and 0.68dBi for 2.4GHz (INPAQ parts number 6036B0263701 (WA-P-LB-02-734)) under Laptop Mode and gain under Tablet Mode is -1.07dBi for 5GHz and -1.71dBi for 2.4GHz (INPAQ parts number 6036B0263701 (WA-P-LB-02-734)). The highest reported SAR for body and simultaneous transmission exposure condition is <0.10W/kg and 1.21W/kg respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousC2PC to add HP Notebook computer, Model: TPN-I137. The max. allowed antenna gain for PIFA type is 2.86dBi for 5GHz and 1.8dBi for 2.4GHz (AWAN parts number 6036B0263601 (AUP5Y-100000)) under Laptop Mode and allowed antenna gain for PIFA type under Tablet Mode is -0.01dBi for 5GHz and -1.47dBi for 2.4GHz (AWAN parts number 6036B0263601 (AUP5Y-100000)). The other PIFA type gain is 0.29dBi for 5GHz and 0.68dBi for 2.4GHz (INPAQ parts number 6036B0263701 (WA-P-LB-02-734)) under Laptop Mode and gain under Tablet Mode is -1.07dBi for 5GHz and -1.71dBi for 2.4GHz (INPAQ parts number 6036B0263701 (WA-P-LB-02-734)). The highest reported SAR for body and simultaneous transmission exposure condition is 1.19W/kg and 1.21W/kg respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousC2PC to add HP Notebook computer, Model: TPN-I137. The max. allowed antenna gain for PIFA type is 2.86dBi for 5GHz and 1.8dBi for 2.4GHz (AWAN parts number 6036B0263601 (AUP5Y-100000)) under Laptop Mode and allowed antenna gain for PIFA type under Tablet Mode is -0.01dBi for 5GHz and -1.47dBi for 2.4GHz (AWAN parts number 6036B0263601 (AUP5Y-100000)). The other PIFA type gain is 0.29dBi for 5GHz and 0.68dBi for 2.4GHz (INPAQ parts number 6036B0263701 (WA-P-LB-02-734)) under Laptop Mode and gain under Tablet Mode is -1.07dBi for 5GHz and -1.71dBi for 2.4GHz (INPAQ parts number 6036B0263701 (WA-P-LB-02-734)). The highest reported SAR for body and simultaneous transmission exposure condition is 1.19W/kg and 1.21W/kg respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into Notebook Computer (Brand : Lenovo ; Model number : IdeaPad Flex 3 11IGL05, IdeaPad Flex 3 11IGL05xxxxxx, 82B2, 82B2xxxxxx,(The "x" in the model name can be 0 to 9, A to Z, a to z, "-" or blank, it represents different sales customer code, all models only name difference)) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.74 W/kg and 1.18 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into Notebook Computer (Brand : Lenovo ; Model number : IdeaPad Flex 3 11IGL05, IdeaPad Flex 3 11IGL05xxxxxx, 82B2, 82B2xxxxxx,(The "x" in the model name can be 0 to 9, A to Z, a to z, "-" or blank, it represents different sales customer code, all models only name difference)) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.19 W/kg and 1.24 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into Notebook Computer (Brand : Lenovo ; Model number : IdeaPad Flex 3 11IGL05, IdeaPad Flex 3 11IGL05xxxxxx, 82B2, 82B2xxxxxx,(The "x" in the model name can be 0 to 9, A to Z, a to z, "-" or blank, it represents different sales customer code, all models only name difference)) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for simultaneous transmission exposure condition is 1.47 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change : This change is to incorporate this Module into Portable category Configuration (Brand : HP ; Model number : TPN-C148) and antenna change as described in the following. PIFA Antenna, Supplier: Wistron NeWeb Corp. Part number: DC33002DO00 (81EAA415.GJK) (Tx1), DC33002DO10 (81EAA415.GJL) (Tx2). Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.19 W/kg and 1.24 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into Portable category Configuration (Brand : HP ; Model number : TPN-C148) and antenna change as described in the following. PIFA Antenna, Supplier: Wistron NeWeb Corp. Part number: DC33002DO00 (81EAA415.GJK) (Tx1), DC33002DO10 (81EAA415.GJL) (Tx2). Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.18 W/kg and 1.21 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into Portable category Configuration (Brand : HP ; Model number : TPN-C148) and antenna change as described in the following. PIFA Antenna, Supplier: Wistron NeWeb Corp. Part number: DC33002DO00 (81EAA415.GJK) (Tx1), DC33002DO10 (81EAA415.GJL) (Tx2). Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for simultaneous transmission exposure condition is 1.24 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change for adding one new portable host platform (Model: IdeaPad Slim 7 15IIL05, Brand: Lenovo) as described in this filing. The highest reported SAR value for body and simultaneously transmitting exposure conditions are < 0.10 W/kg and 1.21 W/kg respectively. Antennas certified listed below: 1, Wistron Neweb Corporation, DQ6615G8100 (81EAA615.G81): 2.4GHz: -1.13 dBi, 5.15~5.35GHz: -2.07 dBi, 5.47~5.725GHz: -0.85 dBi, 5.725~5.85GHz: -0.85 dBi. 2, Wistron Neweb Corporatio, DQ6615G8800 (81EAA615.G88): 2.4GHz: -1.05 dBi, 5.15~5.35GHz: -0.54 dBi, 5.47~5.725GHz: -1.57 dBi, 5.725~5.85GHz: -1.92 dBi. 3, HTK, DQ60ACQD049 (0ACQD019062N): 2.4GHz: -0.4 dBi, 5.15~5.35GHz: 0.95 dBi, 5.47~5.725GHz: 2.79 dBi, 5.725~5.85GHz: 2.43 dBi. 4, HTK, DQ60ACQD066 (0ACQD019073N): 2.4GHz: -1.31 dBi, 5.15~5.35GHz: 2.34 dBi, 5.47~5.725GHz: 2 dBi, 5.725~5.85GHz: 1.74 dBi. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change for adding one new portable host platform (Model: IdeaPad Slim 7 15IIL05, Brand: Lenovo) as described in this filing. The highest reported SAR value for body and simultaneously transmitting exposure conditions are 0.48 W/kg and 1.21 W/kg respectively. Antennas certified listed below: 1, Wistron Neweb Corporation, DQ6615G8100 (81EAA615.G81): 2.4GHz: -1.13 dBi, 5.15~5.35GHz: -2.07 dBi, 5.47~5.725GHz: -0.85 dBi, 5.725~5.85GHz: -0.85 dBi. 2, Wistron Neweb Corporatio, DQ6615G8800 (81EAA615.G88): 2.4GHz: -1.05 dBi, 5.15~5.35GHz: -0.54 dBi, 5.47~5.725GHz: -1.57 dBi, 5.725~5.85GHz: -1.92 dBi. 3, HTK, DQ60ACQD049 (0ACQD019062N): 2.4GHz: -0.4 dBi, 5.15~5.35GHz: 0.95 dBi, 5.47~5.725GHz: 2.79 dBi, 5.725~5.85GHz: 2.43 dBi. 4, HTK, DQ60ACQD066 (0ACQD019073N): 2.4GHz: -1.31 dBi, 5.15~5.35GHz: 2.34 dBi, 5.47~5.725GHz: 2 dBi, 5.725~5.85GHz: 1.74 dBi. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change for adding one new portable host platform (Model: IdeaPad Slim 7 15IIL05, Brand: Lenovo) as described in this filing. The highest reported SAR value for body and simultaneously transmitting exposure conditions are 1.19 W/kg and 1.21 W/kg respectively. Antennas certified listed below: 1, Wistron Neweb Corporation, DQ6615G8100 (81EAA615.G81): 2.4GHz: -1.13 dBi, 5.15~5.35GHz: -2.07 dBi, 5.47~5.725GHz: -0.85 dBi, 5.725~5.85GHz: -0.85 dBi. 2, Wistron Neweb Corporatio, DQ6615G8800 (81EAA615.G88): 2.4GHz: -1.05 dBi, 5.15~5.35GHz: -0.54 dBi, 5.47~5.725GHz: -1.57 dBi, 5.725~5.85GHz: -1.92 dBi. 3, HTK, DQ60ACQD049 (0ACQD019062N): 2.4GHz: -0.4 dBi, 5.15~5.35GHz: 0.95 dBi, 5.47~5.725GHz: 2.79 dBi, 5.725~5.85GHz: 2.43 dBi. 4, HTK, DQ60ACQD066 (0ACQD019073N): 2.4GHz: -1.31 dBi, 5.15~5.35GHz: 2.34 dBi, 5.47~5.725GHz: 2 dBi, 5.725~5.85GHz: 1.74 dBi. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change: Adds new portable host platform (Model: IdeaPad Slim 7 14IIL05; Brand: Lenovo. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.68 W/kg, and 1.07 W/kg (respectively). Main antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6615G9300; or PIFA, Manufacturer: WNC, Part Number: DQ6615G8600; PIFA, Manufacturer: High-Tek Electronics Co., Ltd, Part Number: DQ60ACQD063; or High-Tek Electronics Co., Ltd, Part Number: DQ60ACQD064. Auxiliary antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6615G9300; or PIFA, Manufacturer: WNC, Part Number: DQ6615G8600; PIFA, Manufacturer: High-Tek Electronics Co., Ltd, Part Number: DQ60ACQD063; or High-Tek Electronics Co., Ltd, Part Number: DQ60ACQD064. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change: Adds new portable host platform (Model: IdeaPad Slim 7 14IIL05 IdeaPad Slim 7 14IIL05; Brand: Lenovo. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are < 0.10 W/kg, and 1.42 W/kg (respectively). Main antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6615G9300; or PIFA, Manufacturer: WNC, Part Number: DQ6615G8600; PIFA, Manufacturer: High-Tek Electronics Co., Ltd, Part Number: DQ60ACQD063; or High-Tek Electronics Co., Ltd, Part Number: DQ60ACQD064. Auxiliary antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6615G9300; or PIFA, Manufacturer: WNC, Part Number: DQ6615G8600; PIFA, Manufacturer: High-Tek Electronics Co., Ltd, Part Number: DQ60ACQD063; or High-Tek Electronics Co., Ltd, Part Number: DQ60ACQD064. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change: Adds new portable host platform (Model: IdeaPad Slim 7 14IIL05; Brand: Lenovo. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.36 W/kg, and 1.42 W/kg (respectively). Main antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6615G9300; or PIFA, Manufacturer: WNC, Part Number: DQ6615G8600; PIFA, Manufacturer: High-Tek Electronics Co., Ltd, Part Number: DQ60ACQD063; or High-Tek Electronics Co., Ltd, Part Number: DQ60ACQD064. Auxiliary antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6615G9300; or PIFA, Manufacturer: WNC, Part Number: DQ6615G8600; PIFA, Manufacturer: High-Tek Electronics Co., Ltd, Part Number: DQ60ACQD063; or High-Tek Electronics Co., Ltd, Part Number: DQ60ACQD064. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change: Adds new portable host platform (Model: Lenovo IdeaPad S340-13IML; Brand: Lenovo. The highest reported SAR for use at the body and simultaneously transmission exposure conditions are < 0.10 W/kg, and 1.12 W/kg (respectively). Main antenna type: PIFA, Manufacturer: High-Tek Electronics Co., Ltd, Part Number: 0ACCN019001N, or PIFA, Manufacturer: South Star, Part Number: N12-5800-R0A Aux antenna type: PIFA, Manufacturer: High-Tek Electronics Co., Ltd, Part Number: 0ACCN019002N, or PIFA, Manufacturer: South Star, Part Number: N12-5801-R0A Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change: Adds new portable host platform (Model: Lenovo IdeaPad S340-13IML; Brand: Lenovo. The highest reported SAR for use at the body and simultaneously transmission exposure conditions are 0.88 W/kg, and 1.15 W/kg (respectively). Main antenna type: PIFA, Manufacturer: High-Tek Electronics Co., Ltd, Part Number: 0ACCN019001N, or PIFA, Manufacturer: South Star, Part Number: N12-5800-R0A Aux antenna type: PIFA, Manufacturer: High-Tek Electronics Co., Ltd, Part Number: 0ACCN019002N, or PIFA, Manufacturer: South Star, Part Number: N12-5801-R0A Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change: Adds new portable host platform (Model: Lenovo IdeaPad S340-13IML; Brand: Lenovo. The highest reported SAR for use at the body and simultaneously transmission exposure conditions are 1.09 W/kg, and 1.12 W/kg (respectively). Main antenna type: PIFA, Manufacturer: High-Tek Electronics Co., Ltd, Part Number: 0ACCN019001N, or PIFA, Manufacturer: South Star, Part Number: N12-5800-R0A Aux antenna type: PIFA, Manufacturer: High-Tek Electronics Co., Ltd, Part Number: 0ACCN019002N, or PIFA, Manufacturer: South Star, Part Number: N12-5801-R0A Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.
variousThis Class II Permissive Change is to reduce Bluetooth power. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The device has 20 MHz and 40 MHz bandwidth modes.
variousThis Class II Permissive Change is to reduce Bluetooth power. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change for adding one new portable host platform (Model: Lenovo ThinkBook 14-IML, 20RV; Brand: Lenovo), which contains one module (FCC ID: TX2-RTL8822CE) as described in this filing. The highest reported SAR value for Laptop PC Mode and simultaneously transmitting exposure conditions are 0.94 W/kg, and 1.34 W/kg (respectively). Main/TX1 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4800 (81EAA615.G48): 2.4 GHz: 0.93 dBi; 5.15-5.35 GHz: 1.68 dBi; 5.47-5.725 GHz: 1.33 dBi; 5.725-5.85 GHz: 1.35 dBi. Aux/TX2 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4800 (81EAA615.G48): 2.4 GHz: 0.69 dBi; 5.15-5.35 GHz: 1.52 dBi; 5.47-5.725 GHz: 1.54 dBi; 5.725-5.85 GHz: 1.86 dBi. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change for adding one new portable host platform (Model: Lenovo ThinkBook 15-IML, 20RW; Brand: Lenovo), which contains one module (FCC ID: TX2-RTL8822CE) as described in this filing. Main/TX1 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G5000 (81EAA615.G50) 2.4 GHz: 0.68 dBi; 5.15-5.35 GHz: 0.46 dBi; 5.47-5.725 GHz: 0.79 dBi; 5.725-5.85 GHz: 0.79 dBi. Aux/TX2 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G5000 (81EAA615.G50) BT/WLAN 2.4 GHz: 0.60 dBi; WLAN 5.15-5.35 GHz: -1.35 dBi; WLAN 5.47-5.725 GHz: 0.05 dBi; WLAN 5.725-5.85 GHz: 0.05 dBi. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change for adding one new portable host platform (Model: Lenovo ThinkBook 15-IML, 20RW; Brand: Lenovo), which contains one module (FCC ID: TX2-RTL8822CE) as described in this filing. The highest reported SAR value for Laptop PC Mode and simultaneously transmitting exposure conditions are 1.19 W/kg, and 1.36 W/kg (respectively). Main/TX1 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G5000 (81EAA615.G50) 2.4 GHz: 0.68 dBi; 5.15-5.35 GHz: 0.46 dBi; 5.47-5.725 GHz: 0.79 dBi; 5.725-5.85 GHz: 0.79 dBi. Aux/TX2 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G5000 (81EAA615.G50) BT/WLAN 2.4 GHz: 0.60 dBi; WLAN 5.15-5.35 GHz: -1.35 dBi; WLAN 5.47-5.725 GHz: 0.05 dBi; WLAN 5.725-5.85 GHz: 0.05 dBi. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change for adding one new portable host platform (Model: Lenovo ThinkBook 15-IML, 20RW; Brand: Lenovo), which contains one module (FCC ID: TX2-RTL8822CE) as described in this filing. The highest reported SAR value for Laptop PC Mode and simultaneously transmitting exposure conditions are 0.94 W/kg, and 1.36 W/kg (respectively). Main/TX1 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G5000 (81EAA615.G50) 2.4 GHz: 0.68 dBi; 5.15-5.35 GHz: 0.46 dBi; 5.47-5.725 GHz: 0.79 dBi; 5.725-5.85 GHz: 0.79 dBi. Aux/TX2 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G5000 (81EAA615.G50) BT/WLAN 2.4 GHz: 0.60 dBi; WLAN 5.15-5.35 GHz: -1.35 dBi; WLAN 5.47-5.725 GHz: 0.05 dBi; WLAN 5.725-5.85 GHz: 0.05 dBi. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change for adding one new portable host platform (Model: Lenovo ThinkBook 14-IML, 20RV; Brand: Lenovo), which contains one module (FCC ID: TX2-RTL8822CE) as described in this filing. The highest reported SAR value for Laptop PC Mode and simultaneously transmitting exposure conditions are 1.17 W/kg, and 1.34 W/kg (respectively). Main/TX1 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4800 (81EAA615.G48): 2.4 GHz: 0.93 dBi; 5.15-5.35 GHz: 1.68 dBi; 5.47-5.725 GHz: 1.33 dBi; 5.725-5.85 GHz: 1.35 dBi. Aux/TX2 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4800 (81EAA615.G48): 2.4 GHz: 0.69 dBi; 5.15-5.35 GHz: 1.52 dBi; 5.47-5.725 GHz: 1.54 dBi; 5.725-5.85 GHz: 1.86 dBi. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change for adding one new portable host platform (Model: Lenovo ThinkBook 14-IML, 20RV; Brand: Lenovo), which contains one module (FCC ID: TX2-RTL8822CE) as described in this filing. Main/TX1 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4800 (81EAA615.G48): 2.4 GHz: 0.93 dBi; 5.15-5.35 GHz: 1.68 dBi; 5.47-5.725 GHz: 1.33 dBi; 5.725-5.85 GHz: 1.35 dBi. Aux/TX2 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4800 (81EAA615.G48): 2.4 GHz: 0.69 dBi; 5.15-5.35 GHz: 1.52 dBi; 5.47-5.725 GHz: 1.54 dBi; 5.725-5.85 GHz: 1.86 dBi. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand : Lenovo , Model number : Lenovo IdeaPad S540-13IML) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.15 W/kg and 1.21 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand : Lenovo , Model number : Lenovo IdeaPad S540-13IML) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.01 W/kg and 1.16 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand : Lenovo , Model number : Lenovo IdeaPad S540-13IML) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.08 W/kg and 1.57 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousThis C2PC is to add Notebook Computer of model Lenovo IdeaPad C340-15IML********, 81TL********, Lenovo IdeaPad FLEX-15IML********, 81XH********,Lenovo IdeaPad C340-15IIL********, 81XJ********, Lenovo IdeaPad FLEX-15IIL********, 81XK********. The highest reported SAR for body is 0.85 W/kg. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousThis C2PC is to add Notebook Computer of model Lenovo IdeaPad C340-15IML********, 81TL********, Lenovo IdeaPad FLEX-15IML********, 81XH********,Lenovo IdeaPad C340-15IIL********, 81XJ********, Lenovo IdeaPad FLEX-15IIL********, 81XK********. The highest reported SAR for body is <0.10 W/kg. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousThis C2PC is to add Notebook Computer of model Lenovo Lenovo IdeaPad C340-15IML********, 81TL********, Lenovo IdeaPad FLEX-15IML********, 81XH********,Lenovo IdeaPad C340-15IIL********, 81XJ********, Lenovo IdeaPad FLEX-15IIL********, 81XK********. The highest reported SAR for body is 0.76 W/kg. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousLimited Modular Approval. Power listed is maximum combined conducted output power. This device has 20 and 40 MHz bandwidth modes. Class II Permissive Change: Adds portable operation when integrated into Lenovo Notebook Computer, Model: Lenovo ideapad S530-13IML********, 81WU******** (* = 0~9, A~Z, a~z, - or blank, for marketing use only, with no impact on RF compliance of the product). The highest reported Body and Simultaneous SAR values are 0.47 W/kg and 0.92 W/kg respectively, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: High-Tek Electronics Co, Part Number: 0ACCN018004N, or PIFA, Manufacturer: Yageo, Part Number: ANTA0LC12792WLAN1. AUX Antenna type: PIFA, Manufacturer: High-Tek Electronics Co, Part Number: 0ACCN018004N, or PIFA, Manufacturer: Yageo, Part Number: ANTA0LC12792WLAN1.
variousLimited Modular Approval. Power listed is maximum conducted output power. Class II Permissive Change: Adds portable operation when integrated into Lenovo Notebook Computer, Model: Lenovo ideapad S530-13IML********, 81WU******** (* = 0~9, A~Z, a~z, - or blank, for marketing use only, with no impact on RF compliance of the product). The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 0.51 W/kg respectively, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: High-Tek Electronics Co, Part Number: 0ACCN018004N, or PIFA, Manufacturer: Yageo, Part Number: ANTA0LC12792WLAN1. AUX Antenna type: PIFA, Manufacturer: High-Tek Electronics Co, Part Number: 0ACCN018004N, or PIFA, Manufacturer: Yageo, Part Number: ANTA0LC12792WLAN1.
variousLimited Modular Approval. Power listed is maximum combined conducted output power. This device has 20 and 40 MHz bandwidth modes. Class II Permissive Change: Adds portable operation when integrated into Lenovo Notebook Computer, Model: Lenovo ideapad S530-13IML********, 81WU******** (* = 0~9, A~Z, a~z, - or blank, for marketing use only, with no impact on RF compliance of the product). The highest reported Body and Simultaneous SAR values are 1.17 W/kg and 1.17 W/kg respectively, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: High-Tek Electronics Co, Part Number: 0ACCN018004N, or PIFA, Manufacturer: Yageo, Part Number: ANTA0LC12792WLAN1. AUX Antenna type: PIFA, Manufacturer: High-Tek Electronics Co, Part Number: 0ACCN018004N, or PIFA, Manufacturer: Yageo, Part Number: ANTA0LC12792WLAN1.
variousLimited Modular Approval. Power listed is maximum combined conducted output power. This device has 20 and 40 MHz bandwidth modes. Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: HSN-Q23C. The highest reported Body and Simultaneous SAR values are 0.79 W/kg and 1.15 W/kg respectively, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: Wistron, Part Number: DQ6B15G0800, or PIFA, Manufacturer: Wistron, Part Number: DQ6B15G0900. AUX Antenna type: PIFA, Manufacturer: Wistron, Part Number: DQ6B15G0800. Or PIFA, Manufacturer: Wistron, Part Number: DQ6B15G0900
variousLimited Modular Approval. Power listed is maximum combined conducted output power. This device has 20 and 40 MHz bandwidth modes. Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: HSN-Q23C. The highest reported Body and Simultaneous SAR values are 0.77 W/kg and 1.36 W/kg respectively, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: Wistron, Part Number: DQ6B15G0800, or PIFA, Manufacturer: Wistron, Part Number: DQ6B15G0900. AUX Antenna type: PIFA, Manufacturer: Wistron, Part Number: DQ6B15G0800. Or PIFA, Manufacturer: Wistron, Part Number: DQ6B15G0900
variousClass II Permissive Change for adding one new portable host platform (Model: Lenovo Yoga C640-13IML, 81UE; Brand: Lenovo), which contains one module (FCC ID: TX2-RTL8822CE) as described in this filing. The highest reported SAR value for Tablet PC Mode, Laptop PC Mode, and simultaneously transmitting exposure conditions are 0.44 W/kg, 0.46 W/kg, and 0.68 W/kg (respectively). Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousLimited Modular Approval. Power listed is maximum conducted output power. Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: HSN-Q23C, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: Wistron, Part Number: DQ6B15G0800, or PIFA, Manufacturer: Wistron, Part Number: DQ6B15G0900. AUX Antenna type: PIFA, Manufacturer: Wistron, Part Number: DQ6B15G0800. Or PIFA, Manufacturer: Wistron, Part Number: DQ6B15G0900
variousClass II Permissive Change for adding one new portable host platform (Model: Lenovo Yoga C640-13IML, 81UE; Brand: Lenovo), which contains one module (FCC ID: TX2-RTL8822CE) as described in this filing. The highest reported SAR value for Tablet PC Mode, Laptop PC Mode, and simultaneously transmitting exposure conditions are 0.75 W/kg, 0.21 W/kg, and 0.68 W/kg (respectively). Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change for adding one new portable host platform (Model: Lenovo Yoga C640-13IML, 81UE; Brand: Lenovo), which contains one module (FCC ID: TX2-RTL8822CE) as described in this filing. The highest reported SAR value for Tablet PC Mode, Laptop PC Mode, and simultaneously transmitting exposure conditions are 0.03 W/kg, 0.03 W/kg, and 0.68 W/kg (respectively). Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousLimited Modular Approval. Power listed is maximum combined conducted output power. This device has 20 and 40 MHz bandwidth modes. Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: HSN-Q22C. The highest reported Body and Simultaneous SAR values are 0.98 W/kg and 1.13 W/kg respectively, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: Wistron, Part Number: DQ6B15G2000. AUX Antenna type: PIFA, Manufacturer: Wistron, Part Number: DQ6B15G2000.
variousLimited Modular Approval. Power listed is maximum conducted output power. Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: HSN-Q22C, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: Wistron, Part Number: DQ6B15G2000. AUX Antenna type: PIFA, Manufacturer: Wistron, Part Number: DQ6B15G2000.
variousLimited Modular Approval. Power listed is maximum combined conducted output power. This device has 20 and 40 MHz bandwidth modes. Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: HSN-Q22C. The highest reported Body and Simultaneous SAR values are 0.72 W/kg and 1.35 W/kg respectively, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: Wistron, Part Number: DQ6B15G2000. AUX Antenna type: PIFA, Manufacturer: Wistron, Part Number: DQ6B15G2000.
variousLimited Modular Approval. Power listed is maximum combined conducted output power. This device has 20 and 40 MHz bandwidth modes. Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: HSN-Q21C. The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.34 W/kg respectively, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: Wistron, Part Number: DQ6B15G1400. AUX Antenna type: PIFA, Manufacturer: Wistron, Part Number: DQ6B15G1400.
variousLimited Modular Approval. Power listed is maximum conducted output power. Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: HSN-Q21C, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: Wistron, Part Number: DQ6B15G1400. AUX Antenna type: PIFA, Manufacturer: Wistron, Part Number: DQ6B15G1400.
variousLimited Modular Approval. Power listed is maximum combined conducted output power. This device has 20 and 40 MHz bandwidth modes. Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: HSN-Q21C. The highest reported Body and Simultaneous SAR values are 1.17 W/kg and 1.32 W/kg respectively, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: Wistron, Part Number: DQ6B15G1400. AUX Antenna type: PIFA, Manufacturer: Wistron, Part Number: DQ6B15G1400.
variousThis C2PC is to add personal computer of model Lenovo IdeaPad C340-14IML********, 81TK********, Lenovo IdeaPad FLEX-14IML********, 81XG********. The highest reported SAR for body is <0.10 W/kg. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand : Lenovo , Model number : Lenovo IdeaPad S540-15IWL, Lenovo IdeaPad S540-15IWLxxxxxx, Lenovo IdeaPad S540H-15IWLxxxxxx, Lenovo IdeaPad S540L-15IWLxxxxxx, Lenovo IdeaPad S540R-15IWLxxxxxx, Lenovo IdeaPad S540E-15IWLxxxxxx, Lenovo IdeaPad S540-15IMLxxxxxx, 81NExxxxxx and 81NGxxxxxx, ('x' in the model number is blank or alphanumeric) as described in the filing) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.15 W/kg and 1.53 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand : Lenovo , Model number : Lenovo IdeaPad S540-15IWL, Lenovo IdeaPad S540-15IWLxxxxxx, Lenovo IdeaPad S540H-15IWLxxxxxx, Lenovo IdeaPad S540L-15IWLxxxxxx, Lenovo IdeaPad S540R-15IWLxxxxxx, Lenovo IdeaPad S540E-15IWLxxxxxx, Lenovo IdeaPad S540-15IMLxxxxxx, 81NExxxxxx and 81NGxxxxxx, ('x' in the model number is blank or alphanumeric) as described in the filing) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.96 W/kg and 1.36 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousThis C2PC is to add Notebook Computer of model Lenovo IdeaPad S540-14IML********, Lenovo IdeaPad S540*-14IML********, 81NF********, Lenovo IdeaPad S540-14IML Touch********, 81V0********. The highest reported SAR for body is 1.19 W/kg. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousThis C2PC is to add Notebook Computer of model Lenovo IdeaPad S540-14IML********, Lenovo IdeaPad S540*-14IML********, 81NF********, Lenovo IdeaPad S540-14IML Touch********, 81V0********. The highest reported SAR for body is <0.10 W/kg. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand : Lenovo , Model number : Lenovo IdeaPad S540-15IWL, Lenovo IdeaPad S540-15IWLxxxxxx, Lenovo IdeaPad S540H-15IWLxxxxxx, Lenovo IdeaPad S540L-15IWLxxxxxx, Lenovo IdeaPad S540R-15IWLxxxxxx, Lenovo IdeaPad S540E-15IWLxxxxxx, Lenovo IdeaPad S540-15IMLxxxxxx, 81NExxxxxx and 81NGxxxxxx, ('x' in the model number is blank or alphanumeric) as described in the filing) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.39 W/kg and 1.53 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousThis C2PC is to add personal computer of model Lenovo IdeaPad C340-14IML********, 81TK********, Lenovo IdeaPad FLEX-14IML********, 81XG********. The highest reported SAR for body is 0.77 W/kg. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousThis C2PC is to add personal computer of model Lenovo IdeaPad C340-14IML********, 81TK********, Lenovo IdeaPad FLEX-14IML********, 81XG********. The highest reported SAR for body is 0.85 W/kg. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousThis C2PC is to add Notebook Computer of model Lenovo IdeaPad S540-14IML********, Lenovo IdeaPad S540*-14IML********, 81NF********, Lenovo IdeaPad S540-14IML Touch********, 81V0********. The highest reported SAR for body is 1.19 W/kg. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook computer (Brand/Model number: Lenovo /Lenovo Yoga C740-15IML) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.93 W/kg and 1.56 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number: Lenovo /Lenovo Yoga C740-15IML) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.32 W/kg and 1.56 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number: Lenovo /Lenovo Yoga C740-15IML) and antenna change as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.13 W/kg and 1.56 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand : Lenovo, Model number :Lenovo Yoga C740-14IML as described in the filing) with PIFAs as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.19 W/kg and 1.00 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand : Lenovo, Model number :Lenovo Yoga C740-14IML as described in the filing) with PIFAs as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.40 W/kg and 1.00 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand : Lenovo, Model number :Lenovo Yoga C740-14IML as described in the filing) with PIFAs as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.71 W/kg and 1.00 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousLimited Modular Approval. Power listed is maximum combined conducted output power. This device has 20 and 40 MHz bandwidth modes. Class II Permissive Change: Adds portable operation when integrated into HP Notebook Computer, Model: TPN-W139. The highest reported Body and Simultaneous SAR values are 0.73 W/kg and 1.44 W/kg respectively, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: WA-P-LB-02-604. AUX Antenna type: PIFA, Manufacturer: INPAQ, Part Number: WA-P-LB-02-605.
variousLimited Modular Approval. Power listed is maximum combined conducted output power. Class II Permissive Change: Adds portable operation when integrated into HP Notebook Computer, Model: TPN-W139. SAR compliance demonstrated when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: WA-P-LB-02-604. AUX Antenna type: PIFA, Manufacturer: INPAQ, Part Number: WA-P-LB-02-605.
variousLimited Modular Approval. Power listed is maximum combined conducted output power. This device has 20, 40 and 80 MHz bandwidth modes. Class II Permissive Change: Adds portable operation when integrated into HP Notebook Computer, Model: TPN-W139. The highest reported Body and Simultaneous SAR values are 1.37 W/kg and 1.52 W/kg respectively, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: WA-P-LB-02-604. AUX Antenna type: PIFA, Manufacturer: INPAQ, Part Number: WA-P-LB-02-605.
variousLimited Modular Approval. Power listed is maximum combined conducted output power. This device has 20 and 40 MHz bandwidth modes. Class II Permissive Change: Adds portable operation when integrated into HP Notebook Computer, Model: TPN-W140. The highest reported Body and Simultaneous SAR values are 0.99 W/kg and 1.26 W/kg respectively, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: WA-P-LB-02-606. AUX Antenna type: PIFA, Manufacturer: INPAQ, Part Number: WA-P-LB-02-607.
variousLimited Modular Approval. Power listed is maximum combined conducted output power. This device has 20, 40 and 80 MHz bandwidth modes. Class II Permissive Change: Adds portable operation when integrated into HP Notebook Computer, Model: TPN-W140. The highest reported Body and Simultaneous SAR values are 1.15 W/kg and 1.42 W/kg respectively, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: WA-P-LB-02-606. AUX Antenna type: PIFA, Manufacturer: INPAQ, Part Number: WA-P-LB-02-607.
variousLimited Modular Approval. Power listed is maximum combined conducted output power. Class II Permissive Change: Adds portable operation when integrated into HP Notebook Computer, Model: TPN-W140. The highest reported Body and Simultaneous SAR values are 0.12 W/kg and 1.27 W/kg respectively, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: WA-P-LB-02-606. AUX Antenna type: PIFA, Manufacturer: INPAQ, Part Number: WA-P-LB-02-607.
variousPower listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS S432F, V432F and K432F with antenna LUXSHARE, part no. NA02-034011-012HS, 04072-03360000. The highest reported Body and Simultaneous SAR values are <0.10W/kg and 1.51W/kg respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS S432F, V432F and K432F with antenna LUXSHARE, part no. NA02-034011-012HS, 04072-03360000. The highest reported Body and Simultaneous SAR values are 0.91W/kg and 1.17W/kg respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS S432F, V432F and K432F with antenna LUXSHARE, part no. NA02-034011-012HS, 04072-03360000. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.51W/kg respectively.
variousPower listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS X531F, S531F, K531F, V531F and S5500F, with antenna High Tek, part no. 0ACNXL19015N, 0ACNXL19017N, 04072-03310100 and INPAQ, part no. WA-P-LB-02-645, WA-F-LB-02-178, 04072-03310000. The highest reported Body and Simultaneous SAR values are 0.44W/kg and 1.58W/kg respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS X531F, S531F, K531F, V531F and S5500F, with antenna High Tek, part no. 0ACNXL19015N, 0ACNXL19017N, 04072-03310100 and INPAQ, part no. WA-P-LB-02-645, WA-F-LB-02-178, 04072-03310000. The highest reported Body and Simultaneous SAR values are 1.13W/kg and 1.58W/kg respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS X531F, S531F, K531F, V531F and S5500F, with antenna High Tek, part no. 0ACNXL19015N, 0ACNXL19017N, 04072-03310100 and INPAQ, part no. WA-P-LB-02-645, WA-F-LB-02-178, 04072-03310000. The highest reported Body and Simultaneous SAR values are 1.05W/kg and 1.49W/kg respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS S532F, K532F and V532F, with antenna INPAQ, part no. WA-P-LB-02-647, WA-P-LB-01-225, 04072-03320100. The highest reported Body and Simultaneous SAR values are 0.47W/kg and 0.83W/kg respectively.
variousPower listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS S532F, K532F and V532F, with antenna INPAQ, part no. WA-P-LB-02-647, WA-P-LB-01-225, 04072-03320100. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.47W/kg respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS S532F, K532F and V532F, with antenna INPAQ, part no. WA-P-LB-02-647, WA-P-LB-01-225, 04072-03320100. The highest reported Body and Simultaneous SAR values are 1.12W/kg and 1.47W/kg respectively.
variousC2PC to add HP Notebook PC TPN-Q217. The max. allowed antenna gain for PIFA type is 1.08dBi for 5GHz and 1.83dBi for 2.4GHz (Wistron Neweb Corporation parts number DQ6415GHA00 (81EAA415.GHA); the others are PIFA 1.01dBi for 5GHz and -0.42dBi for 2.4GHz (INPAQ Technology Corporation parts number DQ6LB020700 (WA-P-LBLB-02-070); and PIFA -1.20dBi for 5GHz and -0.09dBi for 2.4GHz (High-Tek Electronics Co., Ltd parts number DQ60ACQD021 (0ACQD018012N). Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousC2PC to add HP Notebook PC TPN-Q217. The max. allowed antenna gain for PIFA type is 1.08dBi for 5GHz and 1.83dBi for 2.4GHz (Wistron Neweb Corporation parts number DQ6415GHA00 (81EAA415.GHA); the others are PIFA 1.01dBi for 5GHz and -0.42dBi for 2.4GHz (INPAQ Technology Corporation parts number DQ6LB020700 (WA-P-LBLB-02-070); and PIFA -1.20dBi for 5GHz and -0.09dBi for 2.4GHz (High-Tek Electronics Co., Ltd parts number DQ60ACQD021 (0ACQD018012N). The highest reported SAR for body and simultaneous transmission exposure condition is <0.10W/kg and 0.17W/kg respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousC2PC to add HP Notebook PC TPN-Q217. The max. allowed antenna gain for PIFA type is 1.08dBi for 5GHz and 1.83dBi for 2.4GHz (Wistron Neweb Corporation parts number DQ6415GHA00 (81EAA415.GHA); the others are PIFA 1.01dBi for 5GHz and -0.42dBi for 2.4GHz (INPAQ Technology Corporation parts number DQ6LB020700 (WA-P-LBLB-02-070); and PIFA -1.20dBi for 5GHz and -0.09dBi for 2.4GHz (High-Tek Electronics Co., Ltd parts number DQ60ACQD021 (0ACQD018012N). The highest reported SAR for body and simultaneous transmission exposure condition is <0.10W/kg and 0.21W/kg respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand : Lenovo, Model number :Lenovo ThinkBook 14s-IWL, 20RM as described in the filing) with PIFAs as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are <0.10 W/kg and 1.51 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand : Lenovo, Model number :Lenovo ThinkBook 14s-IWL, 20RM as described in the filing) with PIFAs as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.28 W/kg and 1.28 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand : Lenovo, Model number :Lenovo ThinkBook 14s-IWL, 20RM as described in the filing) with PIFAs as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.96 W/kg and 1.51 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand : Lenovo, Model number :Lenovo ThinkBook 13s-IWL, 20R9) with PIFAs as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are <0.1 W/kg and 0.85 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand : Lenovo, Model number :Lenovo ThinkBook 13s-IWL, 20R9) with PIFAs as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.62 W/kg and 0.92 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand : Lenovo, Model number :Lenovo ThinkBook 13s-IWL, 20R9) with PIFAs as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.16 W/kg and 0.85 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change the RF Exposure condition from mobile device to portable device condition with PIFA antenna (2.4GHz band antenna gain 3.5dBi, 5GHz band antenna gain 5dBi). The highest reported SAR for body and simultaneous transmission exposure condition is 0.73W/kg and 1.35W/kg respectively. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0.5cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change the RF Exposure condition from mobile device to portable device condition with PIFA antenna (2.4GHz band antenna gain 3.5dBi, 5GHz band antenna gain 5dBi). The highest reported SAR for body and simultaneous transmission exposure condition is 0.78W/kg and 1.35W/kg respectively. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0.5cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousClass II Permissive Change the RF Exposure condition from mobile device to portable device condition with PIFA antenna (2.4GHz band antenna gain 3.5dBi, 5GHz band antenna gain 5dBi). The highest reported SAR for body and simultaneous transmission exposure condition is 0.57W/kg and 1.35W/kg respectively. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0.5cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
variousPower listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
various Compliance Certification Services Inc. Wugu Lab.
various SPORTON International Inc.
various Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
various BTL Inc.
various A Test Lab Techno Corp.
various Shenzhen BALUN Technology Co., Ltd.
various Sporton International Inc.
various SGS Taiwan Ltd. Electromagnetic Compatibility Lab
various Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
various DEKRA Testing and Certification (Suzhou) Co., Ltd.
various DEKRA TESTING AND CERTIFICATION Lin Kou Lab.
various SGS Taiwan Ltd. Electronics & Communication Lab
various Sporton International (Kunshan) Inc.
various BTL INC.
various Name M**** L********
various H****** L****
various A******** C****
various R******** C********
various S****** H******
various F**** L******
various H**** L****
various A**** Y****
various T**** W********
various E****** L******
various J******** X********
various V**** L******
various R****** W******
various H******** Q****
various M**** L********
various J******** L******
various Telephone Number +886-********
various 886-2******** Extension:
various +886-******** Extension:
various +886-********
various +86-7******** Extension:
various 886-3********
various 86-75********
various +886-******** Extension:
various 88633********
various +886-******** Extension:
various 88622******** Extension:
various 886-3******** Extension:
various +886-******** Extension:
various +886-********
various 886-3******** Extension:
various +886-********
various +886-******** Extension:
various 86 51********
various 88628******** Extension:
various +886-******** Extension:
various 086-7********
various +86 0********
various Fax Number +886-********
various +886-********
various +886-********
various 886-3********
various +886-********
various +886-********
various +886-********
various +886-********
various +8863********
various 886-3********
various +886-********
various +886-********
various +886-********
various 88628********
various +886-********
various E-mail m******@dekra.com
various h******@sgs.com
various a******@sporton.com.tw
various r******@bureauveritas.com
various S******@newbtl.com
various f******@atl-lab.com.tw
various H******@baluntek.com
various a******@btl.com.tw
various T******@sgs.com
various e******@tw.bureauveritas.com
various r******@tw.bureauveritas.com
various j******@dekra.com
various v******@dekra.com
various r******@sgs.com
various q******@baluntek.com
various m******@sporton-lab.com
various J******@atl-lab.com.tw
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E CC MO 5180 5240 0.203
1 2 15E CC MO ND 5260 5320 0.207
1 3 15E CC MO ND 5500 5720 0.217
1 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402 2480 0.016
2 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402 2480 0.016
4 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15E CC MO 5180 5240 0.203
6 2 15E CC MO ND 5260 5320 0.207
6 3 15E CC MO ND 5500 5720 0.217
6 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 2402 2480 0.016
8 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15E CC MO 5180 5240 0.203
9 2 15E CC MO ND 5260 5320 0.207
9 3 15E CC MO ND 5500 5720 0.217
9 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15C CC 2402 2480 0.016
10 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15E CC MO 5180 5240 0.203
11 2 15E CC MO ND 5260 5320 0.207
11 3 15E CC MO ND 5500 5720 0.217
11 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15C CC 2402 2480 0.016
14 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15E CC MO 5180 5240 0.203
15 2 15E CC MO ND 5260 5320 0.207
15 3 15E CC MO ND 5500 5720 0.217
15 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15E CC MO 5180 5240 0.203
17 2 15E CC MO ND 5260 5320 0.207
17 3 15E CC MO ND 5500 5720 0.217
17 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 15C CC 2402 2480 0.016
18 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
20 1 15E CC MO 5180 5240 0.203
20 2 15E CC MO ND 5260 5320 0.207
20 3 15E CC MO ND 5500 5700 0.217
20 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
21 1 15C CC 2402 2480 0.016
21 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
22 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
23 1 15E CC MO 5180 5240 0.203
23 2 15E CC MO ND 5260 5320 0.207
23 3 15E CC MO ND 5500 5720 0.217
23 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
24 1 15C CC 2402 2480 0.016
24 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
25 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
26 1 15E CC MO 5180 5240 0.203
26 2 15E CC MO ND 5260 5320 0.207
26 3 15E CC MO ND 5500 5720 0.217
26 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
27 1 15C CC 2402 2480 0.016
27 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
28 1 15E CC MO 5180 5240 0.203
28 2 15E CC MO ND 5260 5320 0.207
28 3 15E CC MO ND 5500 5720 0.217
28 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
29 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
30 1 15C CC 2402 2480 0.016
30 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
31 1 15E CC MO 5180 5240 0.203
31 2 15E CC MO ND 5260 5320 0.207
31 3 15E CC MO ND 5500 5720 0.217
31 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
32 1 15C CC 2402 2480 0.016
32 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
33 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
34 1 15C CC 2402 2480 0.016
34 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
35 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
36 1 15E CC MO 5180 5240 0.203
36 2 15E CC MO ND 5260 5320 0.207
36 3 15E CC MO ND 5500 5720 0.217
36 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
37 1 15E CC MO 5180 5240 0.203
37 2 15E CC MO ND 5260 5320 0.207
37 3 15E CC MO ND 5500 5720 0.217
37 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
38 1 15C CC 2402 2480 0.016
38 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
39 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
40 1 15E CC MO 5180 5240 0.203
40 2 15E CC MO ND 5260 5320 0.207
40 3 15E CC MO ND 5500 5720 0.217
40 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
41 1 15C CC 2402 2480 0.016
41 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
42 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
43 1 15E CC MO 5180 5240 0.203
43 2 15E CC MO ND 5260 5320 0.207
43 3 15E CC MO ND 5500 5720 0.217
43 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
44 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
45 1 15C CC 2402 2480 0.016
45 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
46 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
47 1 15E CC MO 5180 5240 0.203
47 2 15E CC MO ND 5260 5320 0.207
47 3 15E CC MO ND 5500 5720 0.217
47 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
48 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
49 1 15C CC 2402 2480 0.016
49 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
50 1 15E CC MO 5180 5240 0.203
50 2 15E CC MO ND 5260 5320 0.207
50 3 15E CC MO ND 5500 5720 0.217
50 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
51 1 15C CC 2402 2480 0.016
51 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
52 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
53 1 15E CC MO 5180 5240 0.203
53 2 15E CC MO ND 5260 5320 0.207
53 3 15E CC MO ND 5500 5720 0.217
53 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
54 1 15C CC MO 2402 2480 0.016
54 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
55 1 15E CC MO 5180 5240 0.203
55 2 15E CC MO ND 5260 5320 0.207
55 3 15E CC MO ND 5500 5720 0.217
55 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
56 1 15C CC 2402 2480 0.016
56 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
57 1 15C CC 2402 2480 0.016
57 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
58 1 15E CC MO 5180 5240 0.203
58 2 15E CC MO ND 5260 5320 0.207
58 3 15E CC MO ND 5500 5720 0.217
58 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
59 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
60 1 15C CC 2402 2480 0.016
60 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
61 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
62 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
63 1 15E CC MO 5180 5240 0.203
63 2 15E CC MO ND 5260 5320 0.207
63 3 15E CC MO ND 5500 5720 0.217
63 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
64 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
65 1 15C CC 2402 2480 0.016
65 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
66 1 15E CC MO 5180 5240 0.203
66 2 15E CC MO ND 5260 5320 0.207
66 3 15E CC MO ND 5500 5720 0.217
66 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
67 1 15E CC MO 5180 5240 0.203
67 2 15E CC MO ND 5260 5320 0.207
67 3 15E CC MO ND 5500 5720 0.217
67 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
68 1 15C CC 2402 2480 0.016
68 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
69 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
70 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
71 1 15E CC MO 5180 5240 0.203
71 2 15E CC MO ND 5260 5320 0.207
71 3 15E CC MO ND 5500 5720 0.217
71 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
72 1 15C CC 2402 2480 0.016
72 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
73 1 15C CC 2402 2480 0.016
73 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
74 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
75 1 15E CC MO 5180 5240 0.203
75 2 15E CC MO ND 5260 5320 0.207
75 3 15E CC MO ND 5500 5720 0.217
75 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
76 1 15E CC MO 5180 5240 0.203
76 2 15E CC MO ND 5260 5320 0.207
76 3 15E CC MO ND 5500 5720 0.217
76 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
77 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
78 1 15C CC 2402 2480 0.016
78 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
79 1 15C CC 2402 2480 0.016
79 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
80 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
81 1 15E CC MO 5180 5240 0.203
81 2 15E CC MO ND 5260 5320 0.207
81 3 15E CC MO ND 5500 5720 0.217
81 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
82 1 15C CC 2402 2480 0.016
82 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
83 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
84 1 15E CC MO 5180 5240 0.203
84 2 15E CC MO ND 5260 5320 0.207
84 3 15E CC MO ND 5500 5720 0.217
84 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
85 1 15C CC 2402 2480 0.016
85 2 15C CC MO 2412 2462 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
86 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
87 1 15E CC MO 5180 5240 0.203
87 2 15E CC MO ND 5260 5320 0.207
87 3 15E CC MO ND 5500 5700 0.217
87 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
88 1 15E CC MO 5180 5240 0.203
88 2 15E CC MO ND 5260 5320 0.207
88 3 15E CC MO ND 5500 5720 0.217
88 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
89 1 15C CC 2402 2480 0.016
89 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
90 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
91 1 15E CC MO 5180 5240 0.203
91 2 15E CC MO 5260 5320 0.207
91 3 15E CC MO 5500 5720 0.217
91 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
92 1 15C CC 2402 2480 0.016
92 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
93 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
94 1 15C CC MO 2412.00000000 2472.00000000 0.7940000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
95 1 15E CC MO 5180 5240 0.203
95 2 15E CC MO ND 5260 5320 0.207
95 3 15E CC MO ND 5500 5720 0.217
95 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
96 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
97 1 15C CC 2402 2480 0.016
97 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
98 1 15E CC MO 5180 5240 0.203
98 2 15E CC MO ND 5260 5320 0.207
98 3 15E CC MO ND 5500 5720 0.217
98 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
99 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
100 1 15E CC MO 5180 5240 0.203
100 2 15E CC MO ND 5260 5320 0.207
100 3 15E CC MO ND 5500 5720 0.217
100 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
101 1 15C CC 2402 2480 0.016
101 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
102 1 15E CC MO 5180 5240 0.203
102 2 15E CC MO ND 5260 5320 0.207
102 3 15E CC MO ND 5500 5720 0.217
102 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
103 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
104 1 15C CC 2402 2480 0.016
104 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
105 1 15C CC 2402 2480 0.016
105 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
106 1 15E CC MO 5180 5240 0.203
106 2 15E CC MO ND 5260 5320 0.207
106 3 15E CC MO ND 5500 5720 0.217
106 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
107 1 15E CC MO 5180 5240 0.203
107 2 15E CC MO ND 5260 5320 0.207
107 3 15E CC MO ND 5500 5720 0.217
107 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
108 1 15C CC 2402 2480 0.016
108 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
109 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
110 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
111 1 15C CC 2402 2480 0.016
111 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
112 1 15E CC MO 5180 5240 0.203
112 2 15E CC MO ND 5260 5320 0.207
112 3 15E CC MO ND 5500 5720 0.217
112 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
113 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
114 1 15C CC 2402 2480 0.016
114 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
115 1 15E CC MO 5180 5240 0.203
115 2 15E CC MO 5260 5320 0.207
115 3 15E CC MO 5500 5720 0.217
115 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
116 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
117 1 15C CC 2402 2480 0.016
117 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
118 1 15E CC MO 5180 5240 0.203
118 2 15E CC MO ND 5260 5320 0.207
118 3 15E CC MO ND 5500 5720 0.217
118 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
119 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
120 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
121 1 15C CC 2402 2480 0.016
121 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
122 1 15E CC MO 5180 5240 0.203
122 2 15E CC MO ND 5260 5320 0.207
122 3 15E CC MO ND 5500 5720 0.217
122 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
123 1 15E CC MO 5180 5240 0.203
123 2 15E CC MO ND 5260 5320 0.207
123 3 15E CC MO ND 5500 5720 0.217
123 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
124 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
125 1 15C CC 2402 2480 0.016
125 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
126 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
127 1 15E CC MO 5180 5240 0.203
127 2 15E CC MO 5260 5320 0.207
127 3 15E CC MO 5500 5720 0.217
127 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
128 1 15C CC 2402 2480 0.016
128 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
129 1 15C CC 2402 2480 0.016
129 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
130 1 15E CC MO 5180 5240 0.203
130 2 15E CC MO 5260 5320 0.207
130 3 15E CC MO 5500 5720 0.217
130 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
131 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
132 1 15C CC 2402 2480 0.016
132 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
133 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
134 1 15E CC MO 5180 5240 0.203
134 2 15E CC MO 5260 5320 0.207
134 3 15E CC MO 5500 5720 0.217
134 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
135 1 15C CC 2402 2480 0.016
135 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
136 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
137 1 15E CC MO 5180 5240 0.203
137 2 15E CC MO ND 5260 5320 0.207
137 3 15E CC MO ND 5500 5720 0.217
137 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
138 1 15C CC 2402 2480 0.016
138 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
139 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
140 1 15E CC MO 5180 5240 0.203
140 2 15E CC MO ND 5260 5320 0.207
140 3 15E CC MO ND 5500 5720 0.217
140 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
141 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
142 1 15C CC 2402 2480 0.016
142 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
143 1 15E CC MO 5180 5240 0.203
143 2 15E CC MO ND 5260 5320 0.207
143 3 15E CC MO ND 5500 5720 0.217
143 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
144 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
145 1 15C CC 2402 2480 0.016
145 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
146 1 15E CC MO 5180 5240 0.203
146 2 15E CC MO ND 5260 5320 0.207
146 3 15E CC MO ND 5500 5720 0.217
146 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
147 1 15C CC 2402 2480 0.016
147 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
148 1 15E CC MO 5180 5240 0.203
148 2 15E CC MO 5260 5320 0.207
148 3 15E CC MO 5500 5720 0.217
148 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
149 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
150 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
151 1 15C CC 2402 2480 0.016
151 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
152 1 15E CC MO 5180 5240 0.203
152 2 15E CC MO 5260 5320 0.207
152 3 15E CC MO 5500 5720 0.217
152 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
153 1 15C CC 2402 2480 0.016
153 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
154 1 15E CC MO 5180 5240 0.203
154 2 15E CC MO ND 5260 5320 0.207
154 3 15E CC MO ND 5500 5720 0.217
154 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
155 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
156 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
157 1 15E CC MO 5180 5240 0.203
157 2 15E CC MO ND 5260 5320 0.207
157 3 15E CC MO ND 5500 5720 0.217
157 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
158 1 15C CC 2402 2480 0.016
158 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
159 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
160 1 15E CC MO 5180 5240 0.203
160 2 15E CC MO ND 5260 5320 0.207
160 3 15E CC MO ND 5500 5720 0.217
160 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
161 1 15C CC 2402 2480 0.016
161 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
162 1 15C CC 2402 2480 0.016
162 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
163 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
164 1 15E CC MO 5180 5240 0.203
164 2 15E CC MO 5260 5320 0.207
164 3 15E CC MO 5500 5720 0.217
164 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
165 1 15E CC MO 5180 5240 0.2
165 2 15E CC MO ND 5260 5320 0.207
165 3 15E CC MO ND 5500 5720 0.217
165 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
166 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
167 1 15C CC 2402 2480 0.016
167 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
168 1 15E CC MO 5180 5240 0.203
168 2 15E CC MO ND 5260 5320 0.207
168 3 15E CC MO ND 5500 5720 0.217
168 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
169 1 15C CC 2402 2480 0.016
169 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
170 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
171 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
172 1 15C CC 2402 2480 0.016
172 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
173 1 15E CC MO 5180 5240 0.203
173 2 15E CC MO ND 5260 5320 0.207
173 3 15E CC MO ND 5500 5720 0.217
173 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
174 1 15C CC 2402 2480 0.016
174 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
175 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
176 1 15E CC MO 5180 5240 0.203
176 2 15E CC MO ND 5260 5320 0.207
176 3 15E CC MO ND 5500 5720 0.217
176 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
177 1 15E CC MO 5180 5240 0.203
177 2 15E CC MO ND 5260 5320 0.207
177 3 15E CC MO ND 5500 5720 0.217
177 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
178 1 15C CC 2402 2480 0.016
178 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
179 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
180 1 15E CC MO 5180 5240 0.203
180 2 15E CC MO ND 5260 5320 0.207
180 3 15E CC MO ND 5500 5720 0.217
180 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
181 1 15C CC 2402 2480 0.016
181 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
182 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
183 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
184 1 15E CC MO 5180 5240 0.203
184 2 15E CC MO ND 5260 5320 0.207
184 3 15E CC MO ND 5500 5720 0.217
184 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
185 1 15C CC 2402 2480 0.016
185 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
186 1 15C CC 2402 2480 0.016
186 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
187 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
188 1 15E CC MO 5180 5240 0.203
188 2 15E CC MO ND 5260 5320 0.207
188 3 15E CC MO ND 5500 5720 0.217
188 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
189 1 15C CC 2402 2480 0.016
189 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
190 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
191 1 15E CC MO 5180 5240 0.203
191 2 15E CC MO ND 5260 5320 0.207
191 3 15E CC MO ND 5500 5720 0.217
191 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
192 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
193 1 15C CC 2402 2480 0.016
193 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
194 1 15E CC MO 5180 5240 0.203
194 2 15E CC MO ND 5260 5320 0.207
194 3 15E CC MO ND 5500 5720 0.217
194 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
195 1 15C CC 2402 2480 0.016
195 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
196 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
197 1 15E CC MO 5180 5240 0.203
197 2 15E CC MO ND 5260 5320 0.207
197 3 15E CC MO ND 5500 5720 0.217
197 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
198 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
199 1 15C CC MO 2402 2480 0.016
199 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
200 1 15E CC MO 5180 5240 0.203
200 2 15E CC MO ND 5260 5320 0.207
200 3 15E CC MO ND 5500 5720 0.217
200 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
201 1 15C CC 2402 2480 0.003
201 2 15C CC MO 2412 2472 0.121
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
202 1 15E CC MO 5180 5240 0.03
202 2 15E CC MO ND 5260 5320 0.048
202 3 15E CC MO ND 5470 5725 0.038
202 4 15E CC MO 5745 5825 0.048
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
203 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
204 1 15E CC MO 5180 5240 0.203
204 2 15E CC MO ND 5260 5320 0.207
204 3 15E CC MO ND 5500 5720 0.217
204 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
205 1 15C CC 2402 2480 0.016
205 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
206 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
207 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
208 1 15C CC 2402 2480 0.016
208 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
209 1 15E CC MO 5180 5240 0.203
209 2 15E CC MO ND 5260 5320 0.207
209 3 15E CC MO ND 5500 5720 0.217
209 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
210 1 15C CC 2402 2480 0.016
210 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
211 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
212 1 15E CC MO 5180 5240 0.203
212 2 15E CC MO 5260 5320 0.207
212 3 15E CC MO 5500 5720 0.217
212 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
213 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
214 1 15C CC 2402 2480 0.016
214 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
215 1 15E CC MO 5180 5240 0.203
215 2 15E CC MO ND 5260 5320 0.207
215 3 15E CC MO ND 5500 5720 0.217
215 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
216 1 15C CC 2402 2480 0.005
216 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
217 1 15C CC 2402.00000000 2480.00000000 0.0090000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
218 1 15C CC 2402 2480 0.016
218 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
219 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
220 1 15E CC MO 5180 5240 0.203
220 2 15E CC MO ND 5260 5320 0.207
220 3 15E CC MO ND 5500 5720 0.217
220 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
221 1 15C CC 2402 2480 0.016
221 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
222 1 15E CC MO 5180 5240 0.203
222 2 15E CC MO ND 5260 5320 0.207
222 3 15E CC MO ND 5500 5720 0.217
222 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
223 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
224 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
225 1 15C CC 2402 2480 0.016
225 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
226 1 15E CC MO 5180 5240 0.203
226 2 15E CC MO ND 5260 5320 0.207
226 3 15E CC MO ND 5500 5720 0.217
226 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
227 1 15C CC 2402 2480 0.016
227 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
228 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
229 1 15E CC MO 5180 5240 0.203
229 2 15E CC MO ND 5260 5320 0.207
229 3 15E CC MO ND 5500 5720 0.217
229 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
230 1 15C CC 2402 2480 0.016
230 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
231 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
232 1 15E CC MO 5180 5240 0.203
232 2 15E CC MO 5260 5320 0.207
232 3 15E CC MO 5500 5720 0.217
232 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
233 1 15E CC MO 5180 5240 0.203
233 2 15E CC MO 5260 5320 0.207
233 3 15E CC MO 5500 5720 0.217
233 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
234 1 15C CC 2402 2480 0.016
234 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
235 1 15C CC 2402 2480 0.016
235 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
236 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
237 1 15E CC MO 5180 5240 0.203
237 2 15E CC MO ND 5260 5320 0.207
237 3 15E CC MO ND 5500 5720 0.217
237 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
238 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
239 1 15E CC MO 5180 5240 0.203
239 2 15E CC MO 5260 5320 0.207
239 3 15E CC MO 5500 5720 0.217
239 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
240 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
241 1 15C CC 2402 2480 0.016
241 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
242 1 15E CC MO 5180 5240 0.203
242 2 15E CC MO 5260 5320 0.207
242 3 15E CC MO 5500 5720 0.217
242 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
243 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
244 1 15C CC 2402 2480 0.016
244 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
245 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
246 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
247 1 15C CC 2402 2480 0.016
247 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
248 1 15C CC 2402 2480 0.016
248 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
249 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
250 1 15E CC MO 5180 5240 0.203
250 2 15E CC MO ND 5260 5320 0.207
250 3 15E CC MO ND 5500 5720 0.217
250 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
251 1 15C CC 2402 2480 0.016
251 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
252 1 15E CC MO 5180 5240 0.203
252 2 15E CC MO ND 5260 5320 0.207
252 3 15E CC MO ND 5500 5720 0.217
252 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
253 1 15E CC MO 5180 5240 0.203
253 2 15E CC MO ND 5260 5320 0.207
253 3 15E CC MO ND 5500 5720 0.217
253 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
254 1 15E CC MO 5180 5240 0.203
254 2 15E CC MO ND 5260 5320 0.207
254 3 15E CC MO ND 5500 5720 0.217
254 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
255 1 15C CC 2402 2480 0.016
255 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
256 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
257 1 15E CC MO 5180 5240 0.203
257 2 15E CC MO ND 5260 5320 0.207
257 3 15E CC MO ND 5500 5720 0.217
257 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
258 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
259 1 15C CC 2402 2480 0.016
259 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
260 1 15C CC 2402 2480 0.016
260 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
261 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
262 1 15E CC MO 5180 5240 0.203
262 2 15E CC MO ND 5260 5320 0.207
262 3 15E CC MO ND 5500 5720 0.217
262 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
263 1 15C CC 2402 2480 0.016
263 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
264 1 15E CC MO 5180 5240 0.203
264 2 15E CC MO ND 5260 5320 0.207
264 3 15E CC MO ND 5500 5720 0.217
264 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
265 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
266 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
267 1 15C CC 2402 2480 0.016
267 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
268 1 15E CC MO 5180 5240 0.203
268 2 15E CC MO ND 5260 5320 0.207
268 3 15E CC MO ND 5500 5720 0.217
268 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
269 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
270 1 15E CC MO 5180 5240 0.203
270 2 15E CC MO ND 5260 5320 0.207
270 3 15E CC MO ND 5500 5700 0.217
270 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
271 1 15C CC 2402 2480 0.016
271 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
272 1 15C CC 2402 2480 0.016
272 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
273 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
274 1 15E CC MO 5180 5240 0.203
274 2 15E CC MO ND 5260 5320 0.207
274 3 15E CC MO ND 5500 5720 0.217
274 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
275 1 15C CC 2402.00000000 2480.00000000 0.0020000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
276 1 15C CC 2402 2480 0.016
276 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
277 1 15E CC MO 5180 5240 0.203
277 2 15E CC MO ND 5260 5320 0.207
277 3 15E CC MO ND 5500 5720 0.217
277 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
278 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
279 1 15E CC MO 5180 5240 0.203
279 2 15E CC MO ND 5260 5320 0.207
279 3 15E CC MO ND 5500 5720 0.217
279 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
280 1 15C CC 2402 2480 0.016
280 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
281 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
282 1 15C CC 2402 2480 0.016
282 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
283 1 15E CC 5180 5240 0.203
283 2 15E CC MO ND 5260 5320 0.207
283 3 15E CC MO ND 5500 5720 0.217
283 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
284 1 15C CC 2402 2480 0.016
284 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
285 1 15E CC MO 5180 5240 0.203
285 2 15E CC MO ND 5260 5320 0.207
285 3 15E CC MO ND 5500 5720 0.217
285 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
286 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
287 1 15E CC MO 5180 5240 0.203
287 2 15E CC MO ND 5260 5320 0.207
287 3 15E CC MO ND 5500 5720 0.217
287 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
288 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
289 1 15C CC 2402 2480 0.016
289 2 15C CC MO 2412 2472 0.794

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC