FCC ID: TX2-RTL8723BS 802.11b/g/n RTL8723BS Combo module

by: Realtek Semiconductor Corp. latest update: 2017-12-06 model: RTL8723BS

Fifty grants have been issued under this FCC ID from 05/14/2014 to 12/06/2017 (this is one of seventy-three releases in 2017 for this grantee). Public details available include frequency information, internal & external photos, and manuals. some products also feature user submitted or linked drivers, instructions, warrantee terms, troubleshooting guides, & password defaults.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various Users Manual pdf August 18 2015 / October 03 2015
various Users Manual pdf August 18 2015 / October 03 2015
various User Manual Users Manual pdf 883.64 KiB May 12 2017 / June 12 2017
various User Manual (System) Users Manual pdf 151.12 KiB October 20 2014
various User Manual Host Users Manual pdf 2.29 MiB
various User Manual-NB Users Manual pdf 1.96 MiB / October 11 2015
various User Manual-keyboard Users Manual pdf 818.22 KiB / October 11 2015
various User Manual Statement Users Manual pdf 165.97 KiB September 10 2014
various User manual-1 Users Manual pdf 1.20 MiB / March 10 2015
various User manual-2 Users Manual pdf 2.80 MiB / March 10 2015
various Users Manual Users Manual pdf 1.23 MiB
various Internal Photo Internal Photos pdf 2.49 MiB
various Internal Photos Internal Photos pdf 120.98 KiB May 12 2017 / June 12 2017
various Internal Photos I Internal Photos pdf 78.66 KiB May 03 2015
various Internal Photos II Internal Photos pdf 5.15 MiB May 03 2015
various Internal photo SAR Internal Photos pdf 3.27 MiB April 24 2015
various Internal photos for SAR Internal Photos pdf 1.04 MiB
various External Photo External Photos pdf 2.56 MiB
various External Photos External Photos pdf 219.77 KiB May 12 2017 / June 12 2017
various External photo SAR External Photos pdf 677.43 KiB April 24 2015
various External photos for SAR External Photos pdf 395.53 KiB
various ID Label ID Label/Location Info pdf 993.90 KiB
various ID label/Location info ID Label/Location Info pdf 346.60 KiB February 10 2014 / September 10 2014
various Label ID Label/Location Info pdf 36.32 KiB October 19 2015
various Label & Location ID Label/Location Info pdf 71.57 KiB
various Label Location ID Label/Location Info pdf 44.27 KiB
various Label Sample U-BPCIB000 ID Label/Location Info pdf 83.78 KiB
various Label Sample U-BPCIB001 ID Label/Location Info pdf 81.50 KiB
various Label and Location ID Label/Location Info pdf 514.89 KiB October 20 2014
various Label location info ID Label/Location Info pdf 550.31 KiB August 19 2015
various C2PC Cover Letter(s) pdf 52.68 KiB May 12 2017 / June 12 2017
various Confidentiality Request Letter Cover Letter(s) pdf 110.83 KiB May 12 2017 / June 12 2017
various Operational Decription Operational Description pdf December 05 2017 confidential
various Power of Attorney Letter Cover Letter(s) pdf 50.35 KiB May 12 2017 / June 12 2017
various Test Report pdf May 12 2017 / June 12 2017
various Test Report pdf May 12 2017 / June 12 2017
various Test Setup Photos pdf May 12 2017 / June 12 2017
various Test Setup Photos pdf May 12 2017 / June 12 2017
various Test Report pdf May 12 2017 / June 12 2017
various Test Setup Photos pdf May 12 2017 / June 12 2017
various Class II Permissive Change Letter Cover Letter(s) pdf 194.41 KiB
various Confidentiality Letter STC + LTC Cover Letter(s) pdf 215.48 KiB
various Operational Description Antenna Report Operational Description pdf January 25 2017 confidential
various RF Exposure Info pdf
various Test Report pdf
various Test Report pdf
various Test Setup Photos pdf
various Test Setup Photos pdf
various Tune Up Procedure Parts List/Tune Up Info pdf January 25 2017 confidential
various Test Report pdf
various Test Setup Photos pdf
various Agents Letter Cover Letter(s) pdf 279.27 KiB October 19 2015
various C2PC Letter Cover Letter(s) pdf 100.17 KiB October 19 2015
various Host Description Letter Cover Letter(s) pdf 98.15 KiB October 19 2015
various RF Exposure Info pdf October 19 2015
various Block diagram Block Diagram pdf August 18 2015 confidential
various Declaration of Conformity Cover Letter(s) pdf 81.07 KiB
various Declaration of authorization Cover Letter(s) pdf 85.83 KiB
various FCC Class II Change Letter Cover Letter(s) pdf 175.32 KiB
various FCC Request Modular Approval Cover Letter(s) pdf 8.41 KiB
various Module Spec-1 Operational Description pdf August 19 2015 confidential
various Module Spec-2 Operational Description pdf August 19 2015 confidential
various Operational description Operational Description pdf 3.19 MiB
various RF Exposure Info pdf
various Schematics Schematics pdf August 18 2015 confidential
various Test Setup Photos pdf / March 10 2015
various confidentiality Cover Letter(s) pdf 19.54 KiB February 09 2015
various ATTESTATION Cover Letter(s) pdf 27.20 KiB May 18 2015
various AUTHORIZATION LETTER Cover Letter(s) pdf 40.02 KiB May 18 2015
various FCC Declaration of Class II Change Cover Letter(s) pdf 35.67 KiB May 18 2015
various Test Setup Photos pdf May 18 2015
various Antenna Report Parts List/Tune Up Info pdf May 13 2015 confidential
various Class II permissive change letter for FCC Cover Letter(s) pdf 25.96 KiB
various RF Exposure Info pdf
various Test Setup Photos pdf / October 11 2015
various Request for confidentiality letter Cover Letter(s) pdf 171.08 KiB
various Tune up power letter Parts List/Tune Up Info pdf May 13 2015 confidential
various Confidentiality Letter Cover Letter(s) pdf 35.24 KiB May 03 2015
various DoC Attestation Letter Attestation Statements pdf 88.63 KiB June 03 2015 / May 03 2015
various Host Difference Letter Cover Letter(s) pdf 26.47 KiB May 03 2015
various Test Setup Photos pdf May 03 2015
various RF Exposure Info pdf December 02 2015
various Test Report pdf December 02 2015
various Cover Letter (Agent Authorization) Cover Letter(s) pdf 104.59 KiB October 20 2014
various Cover Letter (Grant DSS) Cover Letter(s) pdf 259.93 KiB October 20 2014
various Cover Letter (Grant DTS) Cover Letter(s) pdf 261.83 KiB October 20 2014
various Description of Change rev Attestation Statements pdf 10.47 KiB October 20 2014
various RF Exposure Info pdf October 20 2014
various Test Setup Photos pdf October 20 2014
various ATTESTATION Attestation Statements pdf 27.30 KiB
various Declaration of Class II Change Cover Letter(s) pdf 35.84 KiB
various Test Setup Photos pdf
various FCC C2PC request form Cover Letter(s) pdf 13.00 KiB February 10 2014 / September 10 2014
various RF Exposure Info pdf February 10 2014 / September 10 2014
various confidentiality (FCC) Cover Letter(s) pdf 53.00 KiB February 10 2014 / September 10 2014
various Agent Authorization Cover Letter(s) pdf 137.36 KiB September 10 2014
various Confidentiality Request Cover Letter(s) pdf 228.97 KiB September 10 2014
various Declaration Letter Cover Letter(s) pdf 46.40 KiB September 10 2014
various Description of Change Cover Letter(s) pdf 13.72 KiB September 10 2014
various Test Setup Photos pdf September 10 2014
various Test Setup Photos pdf September 10 2014
various User Manual Users Manual pdf 883.64 KiB May 12 2017 / June 12 2017
various User Manual (System) Users Manual pdf 151.12 KiB October 20 2014
various User Manual Host Users Manual pdf 2.29 MiB
various User Manual-NB Users Manual pdf 1.96 MiB / October 11 2015
various User Manual-keyboard Users Manual pdf 818.22 KiB / October 11 2015
various User Manual Statement Users Manual pdf 165.97 KiB September 10 2014
various User manual-1 Users Manual pdf 1.20 MiB / March 10 2015
various User manual-2 Users Manual pdf 2.80 MiB / March 10 2015
various Users Manual Users Manual pdf 1.23 MiB
various Internal Photo Internal Photos pdf 2.49 MiB
various Internal Photos Internal Photos pdf 120.98 KiB May 12 2017 / June 12 2017
various Internal Photos I Internal Photos pdf 78.66 KiB May 03 2015
various Internal Photos II Internal Photos pdf 5.15 MiB May 03 2015
various Internal photo SAR Internal Photos pdf 3.27 MiB April 24 2015
various Internal photos for SAR Internal Photos pdf 1.04 MiB
various External Photo External Photos pdf 2.56 MiB
various External Photos External Photos pdf 219.77 KiB May 12 2017 / June 12 2017
various External photo SAR External Photos pdf 677.43 KiB April 24 2015
various External photos for SAR External Photos pdf 395.53 KiB
various ID Label ID Label/Location Info pdf 993.90 KiB
various ID label/Location info ID Label/Location Info pdf 346.60 KiB February 10 2014 / September 10 2014
various Label ID Label/Location Info pdf 36.32 KiB October 19 2015
various Label & Location ID Label/Location Info pdf 71.57 KiB
various Label Location ID Label/Location Info pdf 44.27 KiB
various Label Sample U-BPCIB000 ID Label/Location Info pdf 83.78 KiB
various Label Sample U-BPCIB001 ID Label/Location Info pdf 81.50 KiB
various Label and Location ID Label/Location Info pdf 514.89 KiB October 20 2014
various Label location info ID Label/Location Info pdf 550.31 KiB August 19 2015
various C2PC Cover Letter(s) pdf 52.68 KiB May 12 2017 / June 12 2017
various Confidentiality Request Letter Cover Letter(s) pdf 110.83 KiB May 12 2017 / June 12 2017
various Power of Attorney Letter Cover Letter(s) pdf 50.35 KiB May 12 2017 / June 12 2017
various Class II Permissive Change Letter Cover Letter(s) pdf 194.41 KiB
various Confidentiality Letter STC + LTC Cover Letter(s) pdf 215.48 KiB
various Agents Letter Cover Letter(s) pdf 279.27 KiB October 19 2015
various C2PC Letter Cover Letter(s) pdf 100.17 KiB October 19 2015
various Host Description Letter Cover Letter(s) pdf 98.15 KiB October 19 2015
various Declaration of Conformity Cover Letter(s) pdf 81.07 KiB
various Declaration of authorization Cover Letter(s) pdf 85.83 KiB
various FCC Class II Change Letter Cover Letter(s) pdf 175.32 KiB
various FCC Request Modular Approval Cover Letter(s) pdf 8.41 KiB
various Operational description Operational Description pdf 3.19 MiB
various confidentiality Cover Letter(s) pdf 19.54 KiB February 09 2015
various ATTESTATION Cover Letter(s) pdf 27.20 KiB May 18 2015
various AUTHORIZATION LETTER Cover Letter(s) pdf 40.02 KiB May 18 2015
various FCC Declaration of Class II Change Cover Letter(s) pdf 35.67 KiB May 18 2015
various Class II permissive change letter for FCC Cover Letter(s) pdf 25.96 KiB
various Request for confidentiality letter Cover Letter(s) pdf 171.08 KiB
various Confidentiality Letter Cover Letter(s) pdf 35.24 KiB May 03 2015
various DoC Attestation Letter Attestation Statements pdf 88.63 KiB June 03 2015 / May 03 2015
various Host Difference Letter Cover Letter(s) pdf 26.47 KiB May 03 2015
various Cover Letter (Agent Authorization) Cover Letter(s) pdf 104.59 KiB October 20 2014
various Cover Letter (Grant DSS) Cover Letter(s) pdf 259.93 KiB October 20 2014
various Cover Letter (Grant DTS) Cover Letter(s) pdf 261.83 KiB October 20 2014
various Description of Change rev Attestation Statements pdf 10.47 KiB October 20 2014
various ATTESTATION Attestation Statements pdf 27.30 KiB
various Declaration of Class II Change Cover Letter(s) pdf 35.84 KiB
various FCC C2PC request form Cover Letter(s) pdf 13.00 KiB February 10 2014 / September 10 2014
various confidentiality (FCC) Cover Letter(s) pdf 53.00 KiB February 10 2014 / September 10 2014
various Agent Authorization Cover Letter(s) pdf 137.36 KiB September 10 2014
various Confidentiality Request Cover Letter(s) pdf 228.97 KiB September 10 2014
various Declaration Letter Cover Letter(s) pdf 46.40 KiB September 10 2014
various Description of Change Cover Letter(s) pdf 13.72 KiB September 10 2014

frequency equipment class purpose
1 2017-12-06 2422 ~ 2452 DTS - Digital Transmission System Class II Permissive Change
2 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
3 2017-01-26 2422 ~ 2452 DTS - Digital Transmission System
4 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
5 2015-10-19 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
6 2422 ~ 2452 DTS - Digital Transmission System
7 2015-08-19 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
8 2412 ~ 2462 DTS - Digital Transmission System
9 2015-05-18 2412 ~ 2462 DTS - Digital Transmission System
10 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
11 2015-05-15 2412 ~ 2462 DTS - Digital Transmission System
12 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
13 2015-04-24 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
14 2412 ~ 2462 DTS - Digital Transmission System
15 2015-03-05 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
16 2412 ~ 2462 DTS - Digital Transmission System
17 2015-02-16 2412 ~ 2462 DTS - Digital Transmission System
18 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
19 2014-11-20 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
20 2412 ~ 2462 DTS - Digital Transmission System
21 2014-10-27 2412 ~ 2462 DTS - Digital Transmission System
22 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
23 2014-10-20 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
24 2422 ~ 2452 DTS - Digital Transmission System
25 2014-10-17 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
26 2412 ~ 2462 DTS - Digital Transmission System
27 2014-10-09 2412 ~ 2462 DTS - Digital Transmission System
28 2422 ~ 2452 DTS - Digital Transmission System
29 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
30 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
31 2014-10-02 2412 ~ 2462 DTS - Digital Transmission System
32 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
33 2014-09-16 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
34 2422 ~ 2452 DTS - Digital Transmission System
35 2014-09-05 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
36 2412 ~ 2462 DTS - Digital Transmission System
37 2014-08-29 2412 ~ 2462 DTS - Digital Transmission System
38 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
39 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
40 2422 ~ 2452 DTS - Digital Transmission System
41 2014-08-21 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
42 2422 ~ 2452 DTS - Digital Transmission System
43 2014-08-04 2412 ~ 2462 DTS - Digital Transmission System
44 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
45 2014-07-09 2412 ~ 2462 DTS - Digital Transmission System
46 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
47 2014-07-01 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
48 2412 ~ 2462 DTS - Digital Transmission System
49 2014-05-14 2422 ~ 2452 DTS - Digital Transmission System Original Equipment
50 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter

Application Forms

app s Applicant Information
various Effective 2017-12-06
various 2017-01-26
various 2015-10-19
various 2015-08-19
various 2015-05-18
various 2015-05-15
various 2015-04-24
various 2015-03-05
various 2015-02-16
various 2014-11-20
various 2014-10-27
various 2014-10-20
various 2014-10-17
various 2014-10-09
various 2014-10-02
various 2014-09-16
various 2014-09-05
various 2014-08-29
various 2014-08-21
various 2014-08-04
various 2014-07-09
various 2014-07-01
various 2014-05-14
various Applicant's complete, legal business name Realtek Semiconductor Corp.
various FCC Registration Number (FRN) 0020109807
various Physical Address No. 2 Innovation Road II, Hsinchu Science Park
various No. 2
various Hsinchu
various Taiwan
app s TCB Information
various TCB Application Email Address T******@TIMCOENGR.COM
various V******@tuvam.com
various c******@telefication.com
various c******@curtis-straus.com
various L******@ul.com
various K******@phoenix-testlab.de
various b******@phoenix-testlab.de
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
app s FCC ID
various Grantee Code TX2
various Equipment Product Code RTL8723BS
app s Person at the applicant's address to receive grant or for contact
various Name D****** L******
various Title Project Manager
various Telephone Number 886-3******** Extension:
various Fax Number 886-3********
various E-mail d******@realtek.com
app s Technical Contact
various Firm Name Compliance Certification Services
various QuieTek Corporation
various SGS Taiwan Ltd.
various Cerpass Technology Corporation
various Name J**** F********
various M**** C****
various W****** C******
various M******** C********
various Physical Address No. 10, Weiye Rd, Innovation Park
various No.5-22, Ruishukeng, Linkou Dist.
various 134, Wu Kung Rd., Wuku Industrial Zone
various No.66,Tangzhuang Road
various No.5-22, Rueishu Keng, Linkou Dist.
various China
various Taiwan
various Telephone Number 86-51********
various 886-2********
various 88622********
various 886-2******** Extension:
various 86-51********
various Fax Number 86-51********
various 886-2********
various 88622********
various 86-51********
various E-mail j******@ccsrf.com
various m******@quietek.com
various W******@sgs.com
various m******@cerpass.net
app s Non Technical Contact
various Firm Name Compliance Certification Services
various QuieTek Corporation
various SGS Taiwan Ltd.
various Cerpass Technology Corporation
various Name L**** W****
various M****** C****
various W****** C********
various M****** C********
various M******** C******
various Physical Address No. 10, Weiye Rd, Innovation Park
various No.5-22, Ruishukeng, Linkou Dist.
various 134, Wu Kung Rd., Wuku Industrial Zone
various No.66,Tangzhuang Road
various No.5-22, Rueishu Keng, Linkou Dist.
various China
various Taiwan
various Telephone Number 86-51********
various 886-2********
various 88622********
various 886-2******** Extension:
various 86-51********
various Fax Number 86-51********
various 886-2********
various 88622********
various 86-51********
various E-mail l******@ccsrf.com
various m******@quietek.com
various W******@sgs.com
various m******@cerpass.net
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
variousYes
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)07/25/2017
various10/03/2015
various11/10/2015
various04/01/2015
various11/23/2014
various02/25/2015
various11/11/2014
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassDTS - Digital Transmission System
variousDSS - Part 15 Spread Spectrum Transmitter
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)802.11b/g/n RTL8723BS Combo module
various802.11b/g/n RTL8723BS Combo Module
variousTablet PC and Docking
various802.11b/g/n RTL8723BE Combo module
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousModular Equipment TypeSingle Modular Approval
variousLimited Single Modular Approval
variousDoes not apply
variousPurpose / Application is forClass II Permissive Change
variousOriginal Equipment
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsOutput power listed is conducted. This OEM module is approved for use in products operation as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified herein. This device and its antenna(s) must operate with a separation distance of at least 20-cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11n, 20 and 40 MHz mode. Class II Permissive Change. This device added an additional antenna as shown in this filing. User installation is prohibited. Instructions on the installation and/or removal of the module may not be provided to the end user.
variousOutput power listed is conducted. This OEM module is approved for use in products operation as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified herein. This device and its antenna(s) must operate with a separation distance of at least 20-cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Permissive Change. This device added an additional antenna as shown in this filing. User installation is prohibited. Instructions on the installation and/or removal of the module may not be provided to the end user.
variousOutput power listed is conducted. This OEM module is approved for use in products operation as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified herein. This device and its antenna(s) must operate with a separation distance of at least 20-cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11n, 20 and 40 MHz mode. Class II Permissive Change. This device and associated FCC ID label are to be installed in the UNICOM Embedded Fanless PC, Models U-BPCIB000 and U-BPCIB001, as shown in this filing, only by OEM or OEM integrators. User installation is prohibited. Instructions on the installation and/or removal of the module may not be provided to the end user.
variousOutput power listed is conducted. This OEM module is approved for use in products operation as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified herein. This device and its antenna(s) must operate with a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. C2PC. This device and associated FCC ID label are to be installed in the specific Tablet PC with model number: EG20BA2, EG20BI2, EG20Bxx x can be 0 to 9, A to Z, blank or -) shown in this filing only by OEM or OEM integrators user installation is prohibited. Instructions on the installation and/or removal of the module may not be provided to the end user.
variousOutput power listed is conducted. This OEM module is approved for use in products operation as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified herein. This device and its antenna(s) must operate with a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11n, 20MHz and 40MHz mode. C2PC. This device and associated FCC ID label are to be installed in the specific Tablet PC with model number: EG20BA2, EG20BI2, EG20Bxx x can be 0 to 9, A to Z, blank or - )shown in this filing only by OEM or OEM integrators user installation is prohibited. Instructions on the installation and/or removal of the module may not be provided to the end user.
variousOutput power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11n, 20MHz and 40MHz mode. Class II Change: This Class II Change is for implementation in a portable platform from Lenovo(Model Number: Lenovo  ideapad 100S-11IBY******; 80R2******, where '*' can be '0' - '9', 'A' - 'Z', 'a' - 'z' or blank). The highest reported SAR for simultaneous transmission exposure condition is 0.2 W/kg.
variousOutput power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11n, 20MHz and 40MHz mode. Class II Change: This Class II Change is for implementation in a portable platform from Lenovo(Model Number: Lenovo  ideapad 100S-11IBY******; 80R2******, where '*' can be '0' - '9', 'A' - 'Z', 'a' - 'z' or blank). The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are < 0.1 W/kg and 0.2 W/kg, respectively.
variousOutput power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11n, 20MHz and 40MHz mode. Class II Change: This Class II Change for implementation in new host, tablet PC(Model number :TC69RA3).The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 0.88 W/kg (Body).
variousOutput power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Change: This Class II Change for implementation in new host, tablet PC(Model number :TC69RA3).
variousOutput power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11n, 20MHz and 40MHz mode. Class II Change: This Class II Change for implementation in new host TPN-I12, Notebook computer from hp with new antenna. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 0.605 W/kg (Body).
variousOutput power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Change: This Class II Change for implementation in new host TPN-I12, Notebook computer from hp with new antenna. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
variousOutput power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Change: This Class II Change for implementation in Notebook PC(Model number: EF20RAX) from Realtek.
variousOutput power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11n, 20MHz and 40MHz mode. Class II Change: This Class II Change for implementation in Notebook PC(Model number: EF20RAX) from Realtek.
variousSingle Modular. Output power listed is conducted. This OEM module is approved for use in products operation as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified herein. This device and its antenna(s) must operate with a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. C2PC. This device and associated FCC ID label are to be installed in the specific Tablet PC with model number: TP10RA1, TI10RA1, TX10RXX( X can be 0 to 9, A to Z, blank or - ) shown in this filing only by OEM or OEM integrators user installation is prohibited. Instructions on the installation and/or removal of this module may not be provided to the end user.
variousSingle Modular. Output power listed is conducted. This OEM module is approved for use in products operation as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified herein. This device and its antenna(s) must operate with a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11n, 20MHz and 40MHz mode. C2PC. This device and associated FCC ID label are to be installed in the specific Tablet PC with model number: TP10RA1, TI10RA1, TX10RXX( X can be 0 to 9, A to Z, blank or - ) shown in this filing only by OEM or OEM integrators user installation is prohibited. Instructions on the installation and/or removal of this module may not be provided to the end user. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR value is 1.45 W/kg.
variousOutput power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11n, 20MHz and 40MHz mode. Class II Change: This Class II Change for implementation in new host TR69RA3 tablet. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 0.88 W/kg (Body).
variousOutput power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Change: This Class II Change for implementation in new host TR69RA3 tablet. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 0.88 W/kg (Body).
variousOutput power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Change: This Change for implementation in new host, tablet PCs (Model number : TW802, TW80xxxx(x=0~9, A~Z or blank or "-")).
variousOutput power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device has 20/40 MHz bandwidth modes. Class II Change: This Change for implementation in new host, tablet PCs( TW802, TW80xxxx(x=0~9, A~Z or blank or "-")). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 1.32 W/kg (Body).
variousOutput power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device has 20/40 MHz bandwidth modes. Class II Change: This Change for implementation in new host, tablet PCs(Model number : TW70CA1). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 1.04 W/kg (Body).
variousOutput power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Change: This Change for implementation in new host, tablet PCs (Model number : TW70CA1).
variousClass II Permissive for adding a portable host, ECS ELITEGROUP Model: TC97RA1, TC97Rxx (x=0~9, A~Z,a~z or blank or "-"). Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
variousClass II Permissive for adding a portable host, ECS ELITEGROUP Model: TC97RA1, TC97Rxx (x=0~9, A~Z,a~z or blank or "-"). The highest reported SAR value for body-worn use condition is 0.06 W/kg. Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11n, 20MHz and 40MHz mode.
variousOutput power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Change: This Change for implementation in new host, tablet PCs (Model number : TC69RA1).
variousOutput power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device has 20/40 MHz bandwidth modes. Class II Change: This Change for implementation in new host, tablet PCs(Model number : TC69RA1). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 0.88 W/kg (Body).
variousOutput power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11n, 20MHz and 40MHz mode. Class II Change: This Class II Change for implementation in new hosts, tablet PCs from Lenovo. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 1.29 W/kg (Body). The model numbers of tablet PCs are Lenovo MIIX 3-1030XXXXXX, 20458XXXXXX, 80HVXXXXXX.("X" in the model name can be alphanumeric characters, "-" or blank)
variousClass II permissive change filing for the specific combination of portable tablet host (Dell/T01D002) and antenna as documented in this filing. Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11n, 20MHz and 40MHz mode. The highest SAR value for all filings under this FCC ID is 1.42 W/kg. The highest reported SAR value under this filing is 0.80 W/Kg.
variousOutput power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Change: This Class II Change for implementation in new hosts, tablet PCs from Lenovo. The model numbers of tablet PCs are Lenovo MIIX 3-1030XXXXXX, 20458XXXXXX, 80HVXXXXXX.("X" in the model name can be alphanumeric characters, "-" or blank)
variousClass II permissive change filing for the specific combination of portable tablet host (Dell/T01D002) and antenna as documented in this filing. Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
variousOutput power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device has 20/40 MHz bandwidth modes. Class II Change: This Change for implementation in new host, tablet PC. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 1.28 W/kg (Body). The model name of tablet PC is TL10REx.('x' can be '0~9' or 'A~Z'.)
variousOutput power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Change: This Change for implementation in new host, tablet PC. The model name of tablet PC is TL10REx.('x' can be '0~9' or 'A~Z'.)
variousClass II Permissive for adding potable host, ECS ELITEGROUP Model: TC70RA5, TC70xxxx (x=0~9, A~Z,a~z or blank or "-"); MG070A2T-BT. Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
variousClass II Permissive for adding potable host, ECS ELITEGROUP Model: TC70RA5, TC70xxxx (x=0~9, A~Z,a~z or blank or "-"); MG070A2T-BT. The highest reported SAR value for body-worn use condition is 0.34 W/kg. Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11n, 20MHz and 40MHz mode.
variousOutput power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Change for Implementation in new host TZ10II1 Tablet PC.
variousOutput power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11n, 20MHz and 40MHz mode. Class II Change for : Implementation in new host TZ10II1 Tablet PC. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 1.34 W/kg (Body).
variousOutput power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11n, 20MHz and 40MHz mode. Class II Change for : 1. Implementation in new host TC71RA1 tablet. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 1.32 W/kg (Body). 2. Use the software to decreased the conducted output power.
variousOutput power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Change for : 1. Implementation in new host TC71RA1 tablet. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 1.32 W/kg (Body). 2. Use the software to decreased the conducted output power.
variousOutput power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11n, 20MHz and 40MHz mode. Class II Change for implementation in new host "Lenovo MIIX 3-830xxxxxx, 20472xxxxxx, 80JBxxxxxx (x can be 0-9, A-Z, a-z, "-" or blank). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 1.39 W/kg (Body), 1.11 W/kg (simultanous).
variousClass II Permissive Change for adding a portable host ECS ELITEGROUP Model: TC79RA2,TC79xxxx, S27xPU, S27xPW (x=0~9, A~Z, a~z or blank or "-"). Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
variousClass II Permissive Change for adding a portable host ECS ELITEGROUP Model: TC79RA2,TC79xxxx, S27xPU, S27xPW (x=0~9, A~Z, a~z or blank or "-"). The highest reported SAR value for body-worn use condition is 1.3 W/kg. Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11n, 20MHz and 40MHz mode.
variousOutput power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11n, 20MHz and 40MHz mode. Class II Change: This Class II Change for implementation in new host TR10RSx tabletk. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 0.02 W/kg (Body).
variousOutput power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Change: This Class II Change for implementation in new host TWR10RSx tablet.
variousOutput power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11n, 20MHz and 40MHz mode. Class II Change: This Class II Change for implementation in new host TW10xxxx tablet from Winbook. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 1.42 W/kg (Body). Class II Change: This Class II Change for implementation in new host TW80xxxx tablet from Winbook. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 1.39 W/kg (Body).
variousOutput power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Change: This Class II Change for implementation in new host TW10xxxx tablet from Winbook. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 1.42 W/kg (Body). Class II Change: This Class II Change for implementation in new host TW80xxxx tablet from Winbook. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 1.39 W/kg (Body).
variousOutput power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Change: This Class II Change for implementation in new host TW10xxxx tablet from Winbook. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 1.42 W/kg (Body).
variousOutput power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11n, 20MHz and 40MHz mode. Class II Change: Class II Change: This Class II Change for implementation in new host TW10xxxx tablet from Winbook. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 1.42 W/kg (Body).
variousOutput power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11n, 20MHz and 40MHz mode.
variousOutput power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name SPORTON International Inc.
various A Test Lab Techno Corp.
various Compliance Certification Services (Kunshan) Inc.
various DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
various SGS Taiwan Ltd.
various Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
various Cerpass Technology (SuZhou) Co., Ltd.
various Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
various Compliance Certification Services (KunShan) Inc.
various Sporton International Inc.
various Name A******** C******
various J******** L********
various E******** L******
various S******** H****
various R******** W********
various R****** C****
various M****** C********
various K****** C****
various Telephone Number 886-3******** Extension:
various 886-3********
various 86-51********
various +886-******** Extension:
various +886-******** Extension:
various +886-******** Extension:
various 86-05******** Extension:
various 886-3******** Extension:
various 88633******** Extension:
various Fax Number 886-3********
various 886-3********
various 86-51********
various +886-********
various +886-********
various +886-********
various 86-05********
various 886-3********
various 88633********
various E-mail a******@sporton.com.tw
various J******@atl-lab.com.tw
various e******@tw.ccsemc.com
various s******@dekra.com
various R******@sgs.com
various r******@tw.bureauveritas.com
various m******@cerpass.net
various k******@tw.ccsemc.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C CC 2412 2462 0.0442
1 2 15C CC 2422 2452 0.0303
1 3 15C CC 2402 2480 0.0032
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402.00000000 2480.00000000 0.0031000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2412 2462 0.0442
3 2 15C CC 2422 2452 0.0303
3 3 15C CC 2402 2480 0.0032
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402.00000000 2480.00000000 0.0031000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15C CC 2402.00000000 2480.00000000 0.0031000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2412 2462 0.0442
6 2 15C CC 2422 2452 0.0303
6 3 15C CC 2402 2480 0.0032
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 2402.00000000 2480.00000000 0.0031000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 2412 2462 0.044
8 2 15C CC 2402 2480 0.0032
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC 2412 2462 0.044
9 2 15C CC 2402 2480 0.0032
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15C CC 2402.00000000 2480.00000000 0.0031000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15C CC 2402 2480 0.0032
11 2 15C CC 2412 2462 0.044
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15C CC 2402.00000000 2480.00000000 0.0031000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15C CC 2402.00000000 2480.00000000 0.0031000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15C CC 2412 2462 0.044
14 2 15C CC 2402 2480 0.0032
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15C CC 2402.00000000 2480.00000000 0.0031000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15C CC 2412 2462 0.0442
16 2 15C CC 2402 2480 0.0032
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15C CC 2412 2462 0.044
17 2 15C CC 2402 2480 0.0032
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 15C CC 2402.00000000 2480.00000000 0.0031000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 15C CC 2402.00000000 2480.00000000 0.0031000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
20 1 15C CC 2402 2480 0.0032
20 2 15C CC 2412 2462 0.044
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
21 1 15C CC 2412 2462 0.044
21 2 15C CC 2402 2480 0.0032
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
22 1 15C CC 2402.00000000 2480.00000000 0.0031000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
23 1 15C CC 2402.00000000 2480.00000000 0.0031000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
24 1 15C CC 2412 2462 0.0442
24 2 15C CC 2422 2452 0.0303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
25 1 15C CC 2402.00000000 2480.00000000 0.0031000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
26 1 15C CC 2412 2462 0.044
26 2 15C CC 2402 2480 0.0032
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
27 1 15C CC 2412 2462 0.044
27 2 15C CC 2402 2480 0.0032
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
28 1 15C CC 2412 2462 0.0442
28 2 15C CC 2422 2452 0.0303
28 3 15C CC 2402 2480 0.0032
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
29 1 15C CC 2402.00000000 2480.00000000 0.0031000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
30 1 15C CC 2402.00000000 2480.00000000 0.0031000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
31 1 15C CC 2412 2462 0.044
31 2 15C CC 2402 2480 0.0032
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
32 1 15C CC 2402.00000000 2480.00000000 0.0031000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
33 1 15C CC 2402.00000000 2480.00000000 0.0031000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
34 1 15C CC 2412 2462 0.0442
34 2 15C CC 2422 2452 0.0303
34 3 15C CC 2402 2480 0.0032
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
35 1 15C CC 2402.00000000 2480.00000000 0.0031000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
36 1 15C CC 2412 2462 0.044
36 2 15C CC 2402 2480 0.0032
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
37 1 15C CC 2412 2462 0.044
37 2 15C CC 2402 2480 0.0032
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
38 1 15C CC 2402.00000000 2480.00000000 0.0031000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
39 1 15C CC 2402.00000000 2480.00000000 0.0031000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
40 1 15C CC 2412 2462 0.0442
40 2 15C CC 2422 2452 0.0303
40 3 15C CC 2402 2480 0.0032
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
41 1 15C CC 2402.00000000 2480.00000000 0.0031000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
42 1 15C CC 2412 2462 0.0442
42 2 15C CC 2422 2452 0.303
42 3 15C CC 2402 2480 0.0032
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
43 1 15C CC 2412 2462 0.044
43 2 15C CC 2402 2480 0.0032
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
44 1 15C CC 2402.00000000 2480.00000000 0.0031000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
45 1 15C CC 2412 2462 0.044
45 2 15C CC 2402 2480 0.0032
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
46 1 15C CC 2402.00000000 2480.00000000 0.0031000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
47 1 15C CC 2402.00000000 2480.00000000 0.0031000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
48 1 15C CC 2412 2462 0.044
48 2 15C CC 2402 2480 0.0032
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
49 1 15C CC 2412 2462 0.0442
49 2 15C CC 2422 2452 0.0303
49 3 15C CC 2402 2480 0.0032
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
50 1 15C CC 2402.00000000 2480.00000000 0.0031000

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC